linux/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
Irving-CH Lin 82d58440cd dt-bindings: power: Add MediaTek MT8189 power domain
Add dt schema and IDs for the power domain of MediaTek MT8189 SoC.
The MT8189 power domain IP provide power domains control function
for subsys (eg. MFG, audio, venc/vdec ...).

Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2026-02-23 11:55:42 +01:00

270 lines
9.3 KiB
YAML

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/power/mediatek,power-controller.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Mediatek Power Domains Controller
maintainers:
- AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
- Matthias Brugger <mbrugger@suse.com>
description: |
Mediatek processors include support for multiple power domains which can be
powered up/down by software based on different application scenes to save power.
IP cores belonging to a power domain should contain a 'power-domains'
property that is a phandle for SCPSYS node representing the domain.
properties:
$nodename:
pattern: '^power-controller(@[0-9a-f]+)?$'
compatible:
enum:
- mediatek,mt6735-power-controller
- mediatek,mt6795-power-controller
- mediatek,mt6893-power-controller
- mediatek,mt8167-power-controller
- mediatek,mt8173-power-controller
- mediatek,mt8183-power-controller
- mediatek,mt8186-power-controller
- mediatek,mt8188-power-controller
- mediatek,mt8189-power-controller
- mediatek,mt8192-power-controller
- mediatek,mt8195-power-controller
- mediatek,mt8196-hwv-hfrp-power-controller
- mediatek,mt8196-hwv-scp-power-controller
- mediatek,mt8196-power-controller
- mediatek,mt8365-power-controller
'#power-domain-cells':
const: 1
'#address-cells':
const: 1
'#size-cells':
const: 0
access-controllers:
description:
A number of phandles to external blocks to set and clear the required
bits to enable or disable bus protection, necessary to avoid any bus
faults while enabling or disabling a power domain.
For example, this may hold phandles to INFRACFG and SMI.
minItems: 1
maxItems: 3
patternProperties:
"^power-domain@[0-9a-f]+$":
$ref: "#/$defs/power-domain-node"
patternProperties:
"^power-domain@[0-9a-f]+$":
$ref: "#/$defs/power-domain-node"
patternProperties:
"^power-domain@[0-9a-f]+$":
$ref: "#/$defs/power-domain-node"
patternProperties:
"^power-domain@[0-9a-f]+$":
$ref: "#/$defs/power-domain-node"
patternProperties:
"^power-domain@[0-9a-f]+$":
$ref: "#/$defs/power-domain-node"
unevaluatedProperties: false
unevaluatedProperties: false
unevaluatedProperties: false
unevaluatedProperties: false
unevaluatedProperties: false
$defs:
power-domain-node:
type: object
description: |
Represents the power domains within the power controller node as documented
in Documentation/devicetree/bindings/power/power-domain.yaml.
properties:
'#power-domain-cells':
description:
Must be 0 for nodes representing a single PM domain and 1 for nodes
providing multiple PM domains.
'#address-cells':
const: 1
'#size-cells':
const: 0
reg:
description: |
Power domain index. Valid values are defined in:
"include/dt-bindings/power/mt6795-power.h" - for MT8167 type power domain.
"include/dt-bindings/power/mediatek,mt6893-power.h" - for MT6893 type power domain.
"include/dt-bindings/power/mt8167-power.h" - for MT8167 type power domain.
"include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain.
"include/dt-bindings/power/mt8183-power.h" - for MT8183 type power domain.
"include/dt-bindings/power/mediatek,mt8188-power.h" - for MT8188 type power domain.
"include/dt-bindings/power/mt8192-power.h" - for MT8192 type power domain.
"include/dt-bindings/power/mt8195-power.h" - for MT8195 type power domain.
"include/dt-bindings/power/mediatek,mt8365-power.h" - for MT8365 type power domain.
maxItems: 1
clocks:
description: |
A number of phandles to clocks that need to be enabled during domain
power-up sequencing.
clock-names:
description: |
List of names of clocks, in order to match the power-up sequencing
for each power domain we need to group the clocks by name. BASIC
clocks need to be enabled before enabling the corresponding power
domain, and should not have a '-' in their name (i.e mm, mfg, venc).
SUSBYS clocks need to be enabled before releasing the bus protection,
and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
In order to follow properly the power-up sequencing, the clocks must
be specified by order, adding first the BASIC clocks followed by the
SUSBSYS clocks.
domain-supply:
description: domain regulator supply.
mediatek,infracfg:
$ref: /schemas/types.yaml#/definitions/phandle
description: phandle to the device containing the INFRACFG register range.
deprecated: true
mediatek,infracfg-nao:
$ref: /schemas/types.yaml#/definitions/phandle
description: phandle to the device containing the INFRACFG-NAO register range.
deprecated: true
mediatek,smi:
$ref: /schemas/types.yaml#/definitions/phandle
description: phandle to the device containing the SMI register range.
deprecated: true
required:
- reg
required:
- compatible
allOf:
- if:
properties:
compatible:
contains:
enum:
- mediatek,mt8183-power-controller
- mediatek,mt8196-power-controller
then:
properties:
access-controllers:
minItems: 2
maxItems: 2
- if:
properties:
compatible:
contains:
enum:
- mediatek,mt8365-power-controller
then:
properties:
access-controllers:
minItems: 3
maxItems: 3
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/mt8173-clk.h>
#include <dt-bindings/power/mt8173-power.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
scpsys: syscon@10006000 {
compatible = "mediatek,mt8173-scpsys", "syscon", "simple-mfd";
reg = <0 0x10006000 0 0x1000>;
spm: power-controller {
compatible = "mediatek,mt8173-power-controller";
#address-cells = <1>;
#size-cells = <0>;
#power-domain-cells = <1>;
/* power domains of the SoC */
power-domain@MT8173_POWER_DOMAIN_VDEC {
reg = <MT8173_POWER_DOMAIN_VDEC>;
clocks = <&topckgen CLK_TOP_MM_SEL>;
clock-names = "mm";
#power-domain-cells = <0>;
};
power-domain@MT8173_POWER_DOMAIN_VENC {
reg = <MT8173_POWER_DOMAIN_VENC>;
clocks = <&topckgen CLK_TOP_MM_SEL>,
<&topckgen CLK_TOP_VENC_SEL>;
clock-names = "mm", "venc";
#power-domain-cells = <0>;
};
power-domain@MT8173_POWER_DOMAIN_ISP {
reg = <MT8173_POWER_DOMAIN_ISP>;
clocks = <&topckgen CLK_TOP_MM_SEL>;
clock-names = "mm";
#power-domain-cells = <0>;
};
power-domain@MT8173_POWER_DOMAIN_MM {
reg = <MT8173_POWER_DOMAIN_MM>;
clocks = <&topckgen CLK_TOP_MM_SEL>;
clock-names = "mm";
#power-domain-cells = <0>;
mediatek,infracfg = <&infracfg>;
};
power-domain@MT8173_POWER_DOMAIN_VENC_LT {
reg = <MT8173_POWER_DOMAIN_VENC_LT>;
clocks = <&topckgen CLK_TOP_MM_SEL>,
<&topckgen CLK_TOP_VENC_LT_SEL>;
clock-names = "mm", "venclt";
#power-domain-cells = <0>;
};
power-domain@MT8173_POWER_DOMAIN_AUDIO {
reg = <MT8173_POWER_DOMAIN_AUDIO>;
#power-domain-cells = <0>;
};
power-domain@MT8173_POWER_DOMAIN_USB {
reg = <MT8173_POWER_DOMAIN_USB>;
#power-domain-cells = <0>;
};
power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC {
reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>;
clocks = <&clk26m>;
clock-names = "mfg";
#address-cells = <1>;
#size-cells = <0>;
#power-domain-cells = <1>;
power-domain@MT8173_POWER_DOMAIN_MFG_2D {
reg = <MT8173_POWER_DOMAIN_MFG_2D>;
#address-cells = <1>;
#size-cells = <0>;
#power-domain-cells = <1>;
power-domain@MT8173_POWER_DOMAIN_MFG {
reg = <MT8173_POWER_DOMAIN_MFG>;
#power-domain-cells = <0>;
mediatek,infracfg = <&infracfg>;
};
};
};
};
};
};