This is another run of the Coccinelle script for converting kmalloc()
family of allocations to kmalloc_obj() via the existing rules in
scripts/coccinelle/api/kmalloc_objs.cocci
This catches both the set of kmalloc() uses added since the first
kmalloc_obj() conversions in v7.0 and adds a large group missed in the
first pass due to Coccinelle not interacting well with the cleanup.h
scoped_...() family of macros[1]. I worked around this with spatch's
"--macro-file" argument to a file with all the scoped_...() macros mapped
to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control
flow indicator I could find.
Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc,
riscv, and s390 with no new warnings.
Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1]
Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2]
Signed-off-by: Kees Cook <kees+treewide@kernel.org>
Please consider pulling these changes from the signed vfs-7.3-rc1.super tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCan7RJQAKCRCRxhvAZXjc
oroBAP40BufiChnC6I9Ev79QWF+Pfri1r/3AR4xXRG4HkXQaYQD/YE+Ria3+Bt35
+tWU66cYlQ/+9LfU8DJ3KXm7jPUBiQA=
=hXLH
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.3-rc1.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs superblock updates from Christian Brauner:
- Make it possible to share a block device between multiple
filesystems.
erofs can mount read-only blob devices shared between many
superblocks, but because we only tracked a single superblock a
freeze, thaw, removal or sync on such a device was never propagated
to all the superblocks using it, and there was no way to find them.
Add an efficient table to lookup all superblocks using a given block
device.
- A bunch of pre-existing fixes fell out of this work:
A block-device freeze racing a btrfs device change could leave the
whole filesystem stuck frozen. A bdev_freeze() issued by "dmsetup
suspend" or an LVM snapshot resolves that holder to freeze the
filesystem. and bdev_thaw() resolves it again to thaw. A freeze
landing while btrfs is adding, removing or replacing a device freezes
the filesystem. The membership change then drops that link. So the
matching thaw could no longer find the superblock.
Forbid freezing a device for the duration of a membership change,
modelled on deny_write_access()/allow_write_access().
* tag 'vfs-7.3-rc1.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (24 commits)
super: fix dying superblock warning messages
block: reject block device inodes with i_rdev == 0 in lookup_bdev()
selftests/filesystems: add ustat() coverage
fs: look up the superblock via the device table in user_get_super()
super: make fs_holder_ops private
f2fs: open via dedicated fs bdev helpers
erofs: open via dedicated fs bdev helpers
fs: tolerate per-superblock freeze errors on shared devices
fs: look up superblocks via the device table in fs_holder_ops
ext4: open via dedicated fs bdev helpers
btrfs: open via dedicated fs bdev helpers
xfs: port to fs_bdev_file_open_by_path()
fs: add dedicated block device open helpers for filesystems
fs: maintain a global device-to-superblock table
ocfs2: don't reset s_dev on dismount
ext4: use anonymous devices for KUnit test superblocks
fs, block: move blk_mode_t and fop_flags_t into <linux/types.h>
super: take lock after last reference count
super: convert s_count to refcount_t s_passive
btrfs: deny freezing devices undergoing a replace
...
Please consider pulling these changes from the signed vfs-7.3-rc1.mount tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCan7RJQAKCRCRxhvAZXjc
omDqAP9BOedYydQiJhviQggsX5IFfDfCa1semGokHPOsW9WKHwD+PJBHVLvvP/uU
TmzBuX9zkDzPGEDcT7arcXjzKu8gLgY=
=d1MF
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.3-rc1.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull mount updates from Christian Brauner:
- Make the legacy mount API notify pollers of propagation changes.
Changing propagation via change_mnt_propagation() or with
MOVE_MOUNT_SET_GROUP update the propagation relationship of the
target mount. But unlike mount_setattr() neither path touched the
affected mount namespace. So pollers of /proc/<pid>/mountinfo were
never woken.
- Also remove a redundant panic() in mnt_init()
* tag 'vfs-7.3-rc1.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
mount: remove redundant panic() in mnt_init()
fs/namespace: notify pollers of legacy propagation changes
Please consider pulling these changes from the signed vfs-7.3-rc1.misc tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCan7RJQAKCRCRxhvAZXjc
otI6AQCIwshv02UI9fmbTC9pFr8b+v/9IWQwdVULaH61HXgICQD7BE/CktL8nfRs
zCzGS6kBdWgiOA6bdVpgGGLqiMRnQgo=
=Kc+G
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.3-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Bigger cleanups:
- The lockref dead-count handling is tidied up.
The open-coded check for a count below zero as the dead marker
relies on information the caller should not have.
- make put_mnt_ns() leave mounts connected. Destroying a mount
namespace disconnected its mounts from their mount points. So a
file descriptor still open on the parent of a mount point could be
used to peek under it.
Locked mounts were already kept connected to prevent exactly that.
But a mount is only locked when its tree is copied across a user
namespace boundary. So a mount namespace set up by a privileged
component had no locked mounts and its mounts were disconnected.
Passing UMOUNT_CONNECTED keeps every mount connected and prevents
that bug.
- vfs_prepare_mode() passes S_IFDIR for directories. I meant to fix
that ago but didn't get to it. So now someone finally did it.
This kills the exception where the mode could be 0 when a directory
was created whereas every other creation operation passed it
explicitly already.
- move long delayed work for ufs, jffs2, hfsplus, hfs and affs from
the per-cpu system_long_wq to the new unbound system_dfl_long_wq.
None of that work relies on per-cpu state and the work item is
enqueued with queue_delayed_work() whose timer is global anyway. So
it may as well benefit from scheduler task placement.
Smaller fixes and cleanups:
- unlock_buffer() and journal_end_buffer_io_sync() use
clear_and_wake_up_bit()
- the pipe page pools are unified into a single per-pipe pool and the
extra wake_up(rd_wait) is limited to EPOLLET consumers
- eventpoll now computes its timer slack lazily in ep_poll()
- shrink_dcache_for_umount() keeps making progress on busy roots
- excess xarray nodes are freed in clear_inode()
- romfs detects hard link cycles
- the user path of nested backing files is fixed
- pidfd holds exec_update_lock around the namespace ioctl
- non-memcg-aware nr_cached_objects is skipped during memcg slab
shrink
- iomap_write_iter() always returns status
- mangle_path() is renamed to seq_mangle_path()
- inode timestamp accessors are annotated
- new regression test for pipe->poll_usage.
- a few documentation, kernel-doc and selftest fixes"
* tag 'vfs-7.3-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (67 commits)
selftests/namespaces: Fix racy pipe handshake in timens and pidns_separate
selftests/epoll: add a regression test for pipe->poll_usage
pipe: only enable the extra wake_up(rd_wait) for EPOLLET consumers
pidfd: hold exec_update_lock around namespace ioctl
fs: fix user path of nested backing files
fs: remove stale inode_insert5() kernel-doc parameter
fs: fix switch/case indentation in sysfs() syscall
fs: document semantics of kstat::{uid,gid} fields
dcache: keep shrink_dcache_for_umount() making progress on busy roots
seq_file: rename mangle_path to seq_mangle_path
nstree: add/fix struct ns_id_req kernel-doc member fields
dcache: use lockref routines for dead count checks
lockref: tidy up dead count handling
initramfs: fix typo in reserve_initrd_mem comment
fs/pipe: unify the page pools into a single per-pipe pool
fs: annotate inode timestamp accessors
eventpoll: compute timer slack lazily in ep_poll()
selftests/filesystems: add mntns cleanup test
put_mnt_ns(): leave mounts connected
affs: Move long delayed work on system_dfl_long_wq
...
Please consider pulling these changes from the signed vfs-7.3-rc1.kthread tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCan7RJQAKCRCRxhvAZXjc
ohHuAQCFeGhxqsb44KhuJaWXewiXbefr6eg31lXmxgSfg0DILAD/Tw/WmpiUbX5M
H+/jh6NmLKnQ/ADjlWFRy3R1K1Il3w4=
=jwPP
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.3-rc1.kthread' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull kthread vfs updates from Christian Brauner:
"This stops kernel threads from sharing filesystem state with
userspace. This work is about 3 cycles old and has been in -next
for about that time.
When the kernel boots init_task creates PID 1 and then kthreadd. From
that point every kthread and PID 1 share the same fs_struct. That is
why pivot_root() has to rewrite the fs_struct of all kthreads. The
rewriting exists so that kthreads can use init's filesystem state when
they want to. It also means userspace can move the ground out from
under the kernel.
PID 1 now gets a completely separate fs_struct. All kthreads are
anchored in a private SB_KERNMOUNT instance of nullfs that cannot be
mounted on and cannot be used to follow other mounts. Userspace init
can no longer affect kthread filesystem state and kthreads can no
longer affect userspace fs state without explicit opting in to that.
Path lookup from a kthread now fails by default. It makes it
deliberately hard to offload security sensitive operations into init's
filesystem state from a kthread.
Places that legitimately need to look something up there opt in
through the new scoped_with_init_fs() which temporarily overrides the
caller's fs_struct with init's. usermodehelpers remain the only kernel
tasks that genuinely share init's filesystem state, since they execute
random binaries in the root filesystem (excellent...).
The visible result is that /proc/2/root is a nullfs with an empty
mountinfo while /proc/1/root is the real root"
* tag 'vfs-7.3-rc1.kthread' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (26 commits)
initramfs_test: use test init/exit hooks to override init fs
fs: stop rewriting paths for PF_EXITING | PF_DUMPCORE
fs: stop rewriting kthread fs structs
fs: start all kthreads in nullfs
nullfs: make nullfs multi-instance
devtmpfs: create private mount namespace
fs: add umh argument to struct kernel_clone_args
fs: stop sharing fs_struct between init_task and pid 1
af_unix: use scoped_with_init_fs() for coredump socket lookup
initramfs: use scoped_with_init_fs() for rootfs unpacking
pnfs/blocklayout: use scoped_with_init_fs() for SCSI device lookup
ksmbd: use scoped_with_init_fs() for VFS path operations
ksmbd: use scoped_with_init_fs() for filesystem info path lookup
ksmbd: use scoped_with_init_fs() for share path resolution
fs: use scoped_with_init_fs() for kernel_read_file_from_path_initns()
coredump: use scoped_with_init_fs() for coredump path resolution
btrfs: use scoped_with_init_fs() for update_dev_time()
scsi: target: use scoped_with_init_fs() for APTPL metadata
scsi: target: use scoped_with_init_fs() for ALUA metadata
crypto: ccp: use scoped_with_init_fs() for SEV file access
...
When a mount namespace is destroyed, put_mnt_ns() disconnects its mounts
from their mount points. A file descriptor still open on the parent of a
mount point can then be used to look under the mount point.
Locked mounts are kept connected to prevent this. However, a mount is
only locked when its tree is copied across a user namespace boundary. A
mount namespace set up by a privileged component has no locked mounts,
so its mounts are disconnected.
Pass UMOUNT_CONNECTED so every mount is kept connected, as locked mounts
already are.
Signed-off-by: Noah Orlando <Noah.Orlando@deshaw.com>
Link: https://patch.msgid.link/20260706182559.2496448-2-Noah.Orlando@deshaw.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
nullfs provides a permanently empty and immutable directory. Lookups
fail with ENOENT. The directory can be opened, read, stat, mounted upon.
It behaves like nothing is there.
Add its counterpart failfs where the semantics are not "there is
nothing here" but "nothing is supported here". Every operation that
reaches the filesystem fails with EOPNOTSUPP. Even statfs()/fstatfs()
fail so the filesystem cannot be discovered through an fd to it.
EOPNOTSUPP rather than a permission errno keeps that coherent. There
is no permission model in which anything could ever be allowed and
EACCES or EPERM would merely suggest that different credentials might
succeed while EIO would suggest corruption. It also makes hitting the
failfs boundary mostly quite dinstinguishable. A task anchoring its
lookups at real directory file descriptors may be able to tell a failfs
refusal from an ordinary permission failure. I wouldn't go so far as
guaranteeing that but it should mostly work.
No path lookup can open the root, not even with O_PATH. It is never
reached by a lookup in a parent directory. The only way to a path-walk
terminal at the root is a jump through a /proc/<pid>/{root,cwd} magic
link or by mountpoint traversal. The root also refuses
->d_weak_revalidate() which the VFS calls for jumped terminals. That
covers the jump-based references too: an O_PATH open is refused,
name_to_handle_at() cannot encode it into a file handle, and following a
magic link into it fails. A plain readlink() of such a link still works
and shows "failfs:/".
There is a single instance of failfs mounted during early boot via
kern_mount() making it logically distinct from every mount namespace.
Since the mount is a member of no mount namespace mounting onto it
fails. So nothing can ever be mounted on top of it. It cannot be cloned
via OPEN_TREE_CLONE and it does not show up in statmount()/listmount()
or /proc/<pid>/mountinfo. The filesystem is not registered so it is
not visible in /proc/filesystems and cannot be mounted from userspace.
This lets tasks shed their filesystem state completely. A process with
its root directory or working directory in failfs must anchor every path
lookup at an explicit file descriptor or is doomed to fail any lookup.
Absolute paths, absolute symlinks, and AT_FDCWD-relative lookups
simply fail. Followup patches will expose it via a new FD_FAILFS_ROOT
file descriptor sentinel understood by fchdir() and the new fchroot()
system call.
Link: https://patch.msgid.link/20260724-work-failfs-v2-1-485dabbae185@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Since at least as far back as commit 0818bf27c0 ("resizable
namespace.c hashes"), we call alloc_large_system_hash() in
mnt_init() which already panics if the table is NULL.
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Link: https://patch.msgid.link/20260720112331.1096530-1-hamzamahfooz@linux.microsoft.com
Reviewed-by: Jori Koolstra <jkoolstra@xs4all.nl>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Changing mount propagation through the legacy mount API changes
user-visible mountinfo contents, including the shared: and master:
optional fields.
The mount_setattr() path already touches the mount namespace after
change_mnt_propagation(), so pollers of /proc/<pid>/mountinfo are woken
when the namespace event changes.
The legacy mount --make-* path also changes propagation through
change_mnt_propagation(), and MOVE_MOUNT_SET_GROUP updates the
propagation relationship of the target mount. Both paths currently
return without touching the affected mount namespace.
As a result, userspace polling /proc/<pid>/mountinfo can miss these
propagation-only changes even though mountinfo has changed.
A simple reproducer that polls /proc/self/mountinfo while changing
propagation shows the inconsistency.
Before this change:
legacy MS_SHARED: poll ret=0 revents=0x0
mount_setattr MS_SHARED: poll ret=1 revents=0xa
After this change:
legacy MS_SHARED: poll ret=1 revents=0xa
mount_setattr MS_SHARED: poll ret=1 revents=0xa
Fix this by touching the affected mount namespace after successful
propagation changes in do_change_type() and do_set_group().
Signed-off-by: Guopeng Zhang <zhangguopeng@kylinos.cn>
Link: https://patch.msgid.link/20260601032911.940507-1-guopeng.zhang@linux.dev
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Point init_task's fs_struct (root and pwd) at a private nullfs instance
instead of the mutable rootfs. All kthreads now start isolated in nullfs
and must use scoped_with_init_fs() for any path resolution.
PID 1 is moved from nullfs into the initramfs by init_userspace_fs().
Usermodehelper threads use userspace_init_fs via the umh flag in
copy_fs(). All subsystems that need init's filesystem state for path
resolution already use scoped_with_init_fs() from earlier commits in
this series.
This isolates kthreads from userspace filesystem state and makes it
hard to perform filesystem operations from kthread context.
Link: https://patch.msgid.link/20260601-work-kthread-nullfs-v4-23-77ee053060e0@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
fs_holder_ops recovers the owning superblock from bdev->bd_holder, which
forces the holder to be exactly one superblock and prevents several
superblocks from sharing one block device. That's what erofs is doing.
As a first step introduce a global dev_t-keyed rhltable mapping each
device to the superblock(s) using it. The entry is preallocated in
alloc_super() and registered under sb->s_dev by the set callback through
set_anon_super() and set_bdev_super(), the two helpers every set
callback assigns s_dev through. Registration is the final fallible act
of a set callback, so an insert failure unwinds through sget_fc()'s
existing set-failure path: the fs_context keeps ownership of s_fs_info
and the callers' error paths stay correct. set_anon_super() releases
the anonymous dev it allocated when registration fails. Unwinding
through deactivate_locked_super() instead would run kill_sb() and free
s_fs_info behind the caller's back: nfs and ceph free that object
through a local pointer when sget_fc() fails and would double-free.
The superblock stashes the entry in sb->s_super_dev and
kill_super_notify() drops the claim through it, so teardown doesn't
depend on s_dev staying stable; an entry that was never registered is
freed together with the superblock in destroy_super_work().
Each table entry holds a passive reference (s_passive) on its
superblock, so the struct stays valid for as long as the entry is
reachable. Entries are claim-counted through sd_ref: additional claims
on the same (device, superblock) pair share the entry, and the unlink
is deferred to the last put, so a later iteration cursor never resumes
from a removed node.
The table is initialized from mnt_init(): the first superblocks (the
tmpfs shm mount and rootfs) are created from start_kernel() long before
any initcall runs, so an initcall would be too late.
The table has no readers yet; the fs_holder_ops callbacks are switched
over once all devices a filesystem claims are registered.
Link: https://patch.msgid.link/20260616-work-super-bdev_holder_global-v2-7-7df6b864028e@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Please consider pulling these changes from the signed vfs-7.2-rc1.procfs tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaiwLKgAKCRCRxhvAZXjc
otp1AQD6ONFiqQZJhnHbVg1MJlA8iP80x0qlil0OKGUMOby4NAD+MZymcLjtP+4O
T1b9Uca2/qz+L1F5o7vJAD3OAd4BzQA=
=/KGF
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.2-rc1.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull procfs updates from Christian Brauner:
- Revamp fs/filesystems.c
The file was a mess with a hand-rolled linked list in desperate need
of a cleanup. The filesystems list is now RCU-ified, /proc files can
be marked permanent from outside fs/proc/, and the string emitted
when reading /proc/filesystems is pre-generated and cached instead of
pointer-chasing and printfing entry by entry on every read.
The file is read frequently because libselinux reads it and is linked
into numerous frequently used programs (even ones you would not
suspect, like sed!). Scalability also improves since reference
maintenance on open/close is bypassed.
open+read+close cycle single-threaded (ops/s):
before: 442732
after: 1063462 (+140%)
open+read+close cycle with 20 processes (ops/s):
before: 606177
after: 3300576 (+444%)
A follow-up patch adds missing unlocks in some corner cases and
tidies things up.
- Relax the mount visibility check for subset=pid mounts
When procfs is mounted with subset=pid, all static files become
unavailable and only the dynamic pid information is accessible. In
that case there is no point in imposing the full mount visibility
restrictions on the mounter - everything that can be hidden in procfs
is already inaccessible. These restrictions prevented procfs from
being mounted inside rootless containers since almost all container
implementations overmount parts of procfs to hide certain
directories.
As part of this /proc/self/net is only shown in subset=pid mounts for
CAP_NET_ADMIN, reconfiguring subset=pid is rejected, the
SB_I_USERNS_VISIBLE superblock flag is replaced with an
FS_USERNS_MOUNT_RESTRICTED filesystem flag, fully visible mounts are
recorded in a list, and the mount restrictions are finally
documented.
- Protect ptrace_may_access() with exec_update_lock in procfs
Most uses of ptrace_may_access() in procfs should hold
exec_update_lock to avoid TOCTOU issues with concurrent privileged
execve() (like setuid binary execution).
This fixes the easy cases - the owner and visibility checks and the
FD link permission checks - with the gnarlier ones to follow later.
* tag 'vfs-7.2-rc1.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: fix ups and tidy ups to /proc/filesystems caching
proc: protect ptrace_may_access() with exec_update_lock (FD links)
proc: protect ptrace_may_access() with exec_update_lock (part 1)
docs: proc: add documentation about mount restrictions
proc: handle subset=pid separately in userns visibility checks
proc: prevent reconfiguring subset=pid
proc: subset=pid: Show /proc/self/net only for CAP_NET_ADMIN
fs: cache the string generated by reading /proc/filesystems
sysfs: remove trivial sysfs_get_tree() wrapper
fs: RCU-ify filesystems list
fs: move SB_I_USERNS_VISIBLE to FS_USERNS_MOUNT_RESTRICTED
proc: allow to mark /proc files permanent outside of fs/proc/
namespace: record fully visible mounts in list
Please consider pulling these changes from the signed vfs-7.2-rc1.misc tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaiwLKgAKCRCRxhvAZXjc
ou/zAP9SOUE6n58i0BdhLYw0RA9Ge5tz42e4inSFi4tkgfCrDwEAlxbRHDcMyhWB
dHmx8OW6b5riMrW+lGPMH58RMoTkdQ4=
=3vuc
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.2-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Reduce pipe->mutex contention by pre-allocating pages outside the
lock in anon_pipe_write().
anon_pipe_write() called alloc_page() once per page while holding
pipe->mutex. The allocation can sleep doing direct reclaim and runs
memcg charging, which extends the critical section and stalls any
concurrent reader on the same mutex. Now up to 8 pages are
pre-allocated before the mutex is taken, leftovers are recycled
into the per-pipe tmp_page[] cache before unlock, and any remainder
is released after unlock, keeping the allocator out of the critical
section on both sides. On a writers x readers sweep with 64KB
writes against a 1 MB pipe throughput improves 6-28% and average
write latency drops 5-22%; under memory pressure - when the cost of
holding the mutex across reclaim is highest - throughput improves
21-48% and latency drops 17-33%. The microbenchmark is added to
selftests.
- uaccess/sockptr: fix the ignored_trailing logic in
copy_struct_to_user() to behave as documented and the usize check
in copy_struct_from_sockptr() for user pointers, and add
copy_struct_{from,to}_bounce_buffer() and copy_struct_to_sockptr()
helpers for upcoming users (IPPROTO_SMBDIRECT, IPPROTO_QUIC).
- bpf: add a sleepable bpf_real_inode() kfunc that resolves the real
inode backing a dentry via d_real_inode(). On overlayfs the inode
attached to the dentry doesn't carry the underlying device
information; this is used by the filesystem restriction BPF program
that was merged into systemd.
- docs: add guidelines for submitting new filesystems, motivated by
the maintenance burden abandoned and untestable filesystems impose
on VFS developers, blocking infrastructure work like folio
conversions and iomap migration.
Fixes:
- libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo()
and drop the now-redundant assignments in callers. This began as a
one-line dma-buf fix for a path_noexec() warning; a pseudo
filesystem has no reason not to set SB_I_NOEXEC. All init_pseudo()
callers were audited: the only visible effect is on dma-buf where
SB_I_NOEXEC silences the warning.
- Handle set_blocksize() failures in legacy filesystems (bfs, hpfs,
qnx4, jfs, befs, affs, isofs, minix, ntfs3, omfs). Mounting a
device with a sector size > PAGE_SIZE crashed roughly half of them;
the rest had the same missing error handling pattern. Plus a
follow-up releasing the superblock buffer_head when setting the
minix v3 block size fails.
- mount: honour SB_NOUSER in the new mount API.
- fs/fcntl: fix a SOFTIRQ-unsafe lock order in fasync signaling by
switching the process-group paths of send_sigio() and send_sigurg()
from read_lock(&tasklist_lock) to RCU, matching the single-PID
path.
- vfs: add an FS_USERNS_DELEGATABLE flag and set it for NFS, fixing
delegated NFS mounts (fsopen() in a container with the mount
performed by a privileged daemon) that broke when non-init
s_user_ns was tied to FS_USERNS_MOUNT.
- selftests/namespaces: fix a hang in nsid_test where an unreaped
grandchild kept the TAP pipe write-end open, a waitpid(-1) race in
listns_efault_test, and a false FAIL on kernels without listns()
where the tests should SKIP.
- filelock: fix the break_lease() stub signature for
CONFIG_FILE_LOCKING=n.
- init/initramfs_test: wait for the async initramfs unpacking before
running; the test and do_populate_rootfs() share the parser state.
- fs/coredump: reduce redundant log noise in
validate_coredump_safety().
- iomap: pass the correct length to fserror_report_io() in
__iomap_write_begin().
- backing-file: fix the backing_file_open() kerneldoc.
Cleanups:
- initramfs: refactor the cpio hex header parsing to use hex2bin()
instead of the hand-rolled simple_strntoul() which is reverted, and
extend the initramfs KUnit tests to cover header fields with 0x
prefixes.
- Replace __get_free_pages() and friends with kmalloc()/kzalloc()
across quota, proc, ocfs2/dlm, nilfs2, nfs, nfsd, libfs, jfs, jbd2,
isofs, fuse, select, namespace, configfs, binfmt_misc, bfs, and the
do_mounts init code - part of the larger work of replacing page
allocator calls with kmalloc().
- Use clear_and_wake_up_bit() in unlock_buffer() and
journal_end_buffer_io_sync() instead of open-coding the sequence.
- Drop unused VFS exports: unexport drop_super_exclusive(), remove
start_removing_user_path_at(), and fold __start_removing_path()
into start_removing_path().
- fs/read_write: narrow the __kernel_write() export with
EXPORT_SYMBOL_FOR_MODULES().
- vfs: uapi: retire octal and hex constants in favor of (1 << n) for
the O_ flags. Finding a free bit for a new flag across the
architectures was needlessly hard with the mixed bases.
- dcache: add extra sanity checks of dead dentries in dentry_free()
via a new DENTRY_WARN_ONCE() that also prints d_flags.
- iov_iter: use kmemdup_array() in dup_iter() to harden the
allocation against multiplication overflow.
- fs/pipe: write to ->poll_usage only once.
- vfs: remove an always-taken if-branch in find_next_fd().
- dcache: use kmalloc_flex() for struct external_name in __d_alloc().
- namei: use QSTR() instead of QSTR_INIT() in path_pts().
- sync_file_range: delete dead S_ISLNK code.
- Comment fixes: retire a stale comment in fget_task_next() and fix
assorted spelling mistakes"
* tag 'vfs-7.2-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (73 commits)
backing-file: fix backing_file_open() kerneldoc parameter
iomap: pass the correct len to fserror_report_io in __iomap_write_begin
vfs: add FS_USERNS_DELEGATABLE flag and set it for NFS
filelock: fix break_lease() stub signature for CONFIG_FILE_LOCKING=n
vfs: uapi: retire octal and hex numbers in favor of (1 << n) for O_ flags
bpf: add bpf_real_inode() kfunc
fs/read_write: Do not export __kernel_write() to the entire world
libfs: drop redundant SB_I_NOEXEC/SB_I_NODEV in init_pseudo() callers
libfs: set SB_I_NOEXEC and SB_I_NODEV by default in init_pseudo()
mount: honour SB_NOUSER in the new mount API
fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling
selftests/pipe: add pipe_bench microbenchmark
fs/pipe: pre-allocate pages outside pipe->mutex in anon_pipe_write
fs: retire stale comment in fget_task_next()
fs: fix spelling mistakes in comment
bfs: replace get_zeroed_page() with kzalloc()
binfmt_misc: replace __get_free_page() with kmalloc()
configfs: replace __get_free_pages() with kzalloc()
fs/namespace: use __getname() to allocate mntpath buffer
fs/select: replace __get_free_page() with kmalloc()
...
open_tree(..., OPEN_TREE_NAMESPACE) and
fsmount(..., FSMOUNT_NAMESPACE, ...) currently work on non-directories,
like regular files. That's bad for two reasons:
- It ends up mounting a regular file over the inherited namespace root,
which is a directory; mounting a non-directory over a directory is
normally explicitly forbidden, see for example do_move_mount()
- It causes setns() on the new namespace to set the cwd to a regular
file, which the rest of VFS does not expect
Fix it by restricting create_new_namespace() (which is used by both of
these flags) to directories.
Leave the behavior for OPEN_TREE_CLONE as-is, that seems unproblematic.
Fixes: 9b8a0ba682 ("mount: add OPEN_TREE_NAMESPACE")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: stable@kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
may_decode_fh() accesses mount::mnt_ns without holding any locks; that
means the mount can concurrently be unmounted, and the mnt_namespace can
concurrently be freed after an RCU grace period.
This race can happens as follows, assuming that the mount point was
created by open_tree(..., OPEN_TREE_CLONE):
thread 1 thread 2 RCU
__do_sys_open_by_handle_at
do_handle_open
handle_to_path
may_decode_fh
is_mounted
[mount::mnt_ns access]
[mount::mnt_ns access]
__do_sys_close
fput_close_sync
__fput
dissolve_on_fput
umount_tree
class_namespace_excl_destructor
namespace_unlock
free_mnt_ns
mnt_ns_tree_remove
call_rcu(mnt_ns_release_rcu)
mnt_ns_release_rcu
mnt_ns_release
kfree
[mnt_namespace::user_ns access] **UAF**
Fix it by taking rcu_read_lock() around the mount::mnt_ns access, like
in __prepend_path().
Additionally, document the semantics of mount::mnt_ns, and use WRITE_ONCE()
for writers that can race with lockless readers.
This bug is unreachable unless one of the following is set:
- CONFIG_PREEMPTION
- CONFIG_RCU_STRICT_GRACE_PERIOD
because it requires an RCU grace period to happen during a syscall without
an explicit preemption.
This doesn't seem to have interesting security impact; worst-case, it could
leak the result of an integer comparison to userspace (from the level
check in cap_capable()), cause an endless loop, or crash the kernel by
dereferencing an invalid address.
Fixes: 620c266f39 ("fhandle: relax open_by_handle_at() permission checks")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://patch.msgid.link/20260603-vfs-fhandle-uaf-fix-v2-1-d05db76a5084@google.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
One should *not* be allowed to mount one of those, new API or not.
Reported-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://patch.msgid.link/20260602020444.GP2636677@ZenIV
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
mnt_warn_timestamp_expiry() allocates memory for a path with
__get_free_page() although there is a dedicated helper for allocation of
file paths: __getname().
Replace __get_free_page() for allocation of a path buffer with __getname().
Christian Brauner <brauner@kernel.org> says:
Pass PATH_MAX (not PAGE_SIZE) to d_path() to match the size that
__getname() actually allocates, and drop the now-unnecessary NULL check
around __putname() since __putname() handles NULL. Both per Jan Kara's
review feedback, acked by the author.
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Link: https://patch.msgid.link/20260523-b4-fs-v1-14-275e36a83f0e@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
When procfs is mounted with subset=pid, only the dynamic process-related
part of the filesystem remains visible. That part cannot be hidden by
overmounts, so checking whether an existing procfs mount is fully
visible does not make sense for this mode.
At the same time, a subset=pid procfs mount must not be used as evidence
that a later procfs mount would not reveal additional information. It
provides a restricted view of procfs, not the full filesystem view.
Mark subset=pid procfs instances as restricted variants. Ignore
restricted variants when looking for an already-visible mount, and allow
new restricted variants without consulting mnt_already_visible().
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Link: https://patch.msgid.link/4d5e760c3d534dd2e05578d119cc408450053a98.1777278334.git.legion@kernel.org
Reviewed-by: Aleksa Sarai <aleksa@amutable.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Whether a filesystem's mounts need to undergo a visibility check in user
namespaces is a static property of the filesystem type, not a runtime
property of each superblock instance. Both proc and sysfs always set
SB_I_USERNS_VISIBLE on their superblocks unconditionally (sysfs does so
on first creation, and subsequent mounts reuse the same superblock).
Move this flag from sb->s_iflags (SB_I_USERNS_VISIBLE) to
file_system_type->fs_flags (FS_USERNS_MOUNT_RESTRICTED) so the intent
is expressed at the filesystem type level where it belongs.
All check sites are updated to test sb->s_type->fs_flags instead of
sb->s_iflags. The SB_I_NOEXEC and SB_I_NODEV flags remain on the
superblock as they are runtime properties set during fill_super.
Link: https://patch.msgid.link/72887c5b6204dc3adf5a53104f0be6bd8bc4f6cd.1777278334.git.legion@kernel.org
Reviewed-by: Aleksa Sarai <aleksa@amutable.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Instead of wading through all the mounts in the mount namespace rbtree
to find fully visible procfs and sysfs mounts, be honest about them
being special cruft and record them in a separate per-mount namespace
list.
Link: https://patch.msgid.link/684859a8e0ac929cb89c1fbe16ce15b30c70eb1f.1777278334.git.legion@kernel.org
Reviewed-by: Aleksa Sarai <aleksa@amutable.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In the OPEN_TREE_NAMESPACE path vfs_open_tree() resolves a path via
filename_lookup() without holding namespace_lock. Between the lookup
and create_new_namespace() acquiring namespace_lock via
LOCK_MOUNT_EXACT_COPY() another thread can unmount the mount, setting
mnt->mnt_ns to NULL.
When create_new_namespace() then checks !mnt->mnt_ns it incorrectly
takes the swap-and-mntget path that was designed for fsmount()'s
detached mounts. This reuses a mount whose mnt_mp_list is in an
inconsistent state from the concurrent unmount, causing a general
protection fault in __umount_mnt() -> hlist_del_init(&mnt->mnt_mp_list)
during namespace teardown.
Remove the !mnt->mnt_ns special case entirely. Instead, always
duplicate the mount:
- For OPEN_TREE_NAMESPACE use __do_loopback() which will properly
clone the mount or reject it via may_copy_tree() if it was
unmounted in the race window.
- For fsmount() use clone_mnt() directly (via the new MOUNT_COPY_NEW
flag) since the mount is freshly created by vfs_create_mount() and
not in any namespace so __do_loopback()'s IS_MNT_UNBINDABLE,
may_copy_tree, and __has_locked_children checks don't apply.
Reported-by: syzbot+e4470cc28308f2081ec8@syzkaller.appspotmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Allow MOVE_MOUNT_BENEATH to target the caller's rootfs. When the target
of a mount-beneath operation is the caller's root mount, verify that:
(1) The caller is located at the root of the mount, as enforced by
path_mounted() in do_lock_mount().
(2) Propagation from the parent mount would not overmount the target,
to avoid propagating beneath the rootfs of other mount namespaces.
The root-switching is decomposed into individually atomic, locally-scoped
steps: mount-beneath inserts the new root under the old one, chroot(".")
switches the caller's root, and umount2(".", MNT_DETACH) removes the old
root. Since each step only modifies the caller's own state, this avoids
cross-namespace vulnerabilities and inherent fork/unshare/setns races
that a chroot_fs_refs()-based approach would have.
Userspace can use the following workflow to switch roots:
fd_tree = open_tree(-EBADF, "/newroot",
OPEN_TREE_CLONE | OPEN_TREE_CLOEXEC);
fchdir(fd_tree);
move_mount(fd_tree, "", AT_FDCWD, "/",
MOVE_MOUNT_BENEATH | MOVE_MOUNT_F_EMPTY_PATH);
chroot(".");
umount2(".", MNT_DETACH);
Link: https://patch.msgid.link/20260224-work-mount-beneath-rootfs-v1-2-8c58bf08488f@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
When performing a mount-beneath operation the target mount can often be
locked:
unshare(CLONE_NEWUSER | CLONE_NEWNS);
mount --beneath -t tmpfs tmpfs /proc
will fail because the procfs mount on /proc became locked when the mount
namespace was created from the parent mount namespace. Same logic for:
unshare(CLONE_NEWUSER | CLONE_NEWNS);
mount --beneath -t tmpfs tmpfs /
MNT_LOCKED is raised to prevent an unprivileged mount namespace from
revealing whatever is under a given mount. To replace the rootfs we need
to handle that case though.
We can simply transfer the locked mount property from the top mount to
the mount beneath. The new mount we mounted beneath the top mount takes
over the job of the top mount in protecting the parent mount from being
revealed. This leaves us free to allow the top mount to be unmounted.
This also works during mount propagation and also works for the
non-MOVE_MOUNT_BENEATH case:
(1) move_mount(MOVE_MOUNT_BENEATH): @source_mnt->overmount always NULL
(2) move_mount(): @source_mnt->overmount maybe !NULL
For (1) can_move_mount_beneath() rejects overmounted @source_mnt (We
could allow this but whatever it's not really a use-case and it's fugly
to move an overmounted mount stack around. What are you even doing? So
let's keep that restriction.
For (2) we can have @source_mnt overmounted (Someone overmounted us
while we locked the target mount.). Both are fine. @source_mnt will be
mounted on whatever @q was mounted on and @q will be mounted on the top
of the @source_mnt mount stack. Even in such cases we can unlock @q and
lock @source_mnt if @q was locked.
This effectively makes mount propagation useful in cases where a mount
namespace has a locked mount somewhere and we propagate a new mount
beneath it but the mount namespace could never get at it because the old
top mount remains locked. Again, we just let the newly propagated mount
take over the protection and unlock the top mount.
Link: https://patch.msgid.link/20260224-work-mount-beneath-rootfs-v1-1-8c58bf08488f@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add support for creating a mount namespace that contains only a copy of
the root mount from the caller's mount namespace, with none of the
child mounts. This is useful for containers and sandboxes that want to
start with a minimal mount table and populate it from scratch rather
than inheriting and then tearing down the full mount tree.
Two new flags are introduced:
- CLONE_EMPTY_MNTNS for clone3(), using the 64-bit flag space.
- UNSHARE_EMPTY_MNTNS for unshare(), reusing the
CLONE_PARENT_SETTID bit which has no meaning for unshare.
Both flags imply CLONE_NEWNS. For the unshare path,
UNSHARE_EMPTY_MNTNS is converted to CLONE_EMPTY_MNTNS in
unshare_nsproxy_namespaces() before it reaches copy_mnt_ns(), so the
mount namespace code only needs to handle a single flag.
In copy_mnt_ns(), when CLONE_EMPTY_MNTNS is set, clone_mnt() is used
instead of copy_tree() to clone only the root mount. The caller's root
and working directory are both reset to the root dentry of the new
mount.
The cleanup variables are changed from vfsmount pointers with
__free(mntput) to struct path with __free(path_put) because the empty
mount namespace path needs to release both mount and dentry references
when replacing the caller's root and pwd. In the normal (non-empty)
path only the mount component is set, and dput(NULL) is a no-op so
path_put remains correct there as well.
Link: https://patch.msgid.link/20260306-work-empty-mntns-consolidated-v1-1-6eb30529bbb0@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add FSMOUNT_NAMESPACE flag to fsmount() that creates a new mount
namespace with the newly created filesystem attached to a copy of the
real rootfs. This returns a namespace file descriptor instead of an
O_PATH mount fd, similar to how OPEN_TREE_NAMESPACE works for open_tree().
This allows creating a new filesystem and immediately placing it in a
new mount namespace in a single operation, which is useful for container
runtimes and other namespace-based isolation mechanisms.
The rootfs mount is created before copying the real rootfs for the new
namespace meaning that the mount namespace id for the mount of the root
of the namespace is bigger than the child mounted on top of it. We've
never explicitly given the guarantee for such ordering and I doubt
anyone relies on it. Accepting that lets us avoid copying the mount
again and also avoids having to massage may_copy_tree() to grant an
exception for fsmount->mnt->mnt_ns being NULL.
Link: https://patch.msgid.link/20260122-work-fsmount-namespace-v1-3-5ef0a886e646@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Please consider pulling these changes from the signed vfs-7.0-rc2.fixes tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaZ7xWAAKCRCRxhvAZXjc
onpeAP4qOrTURIAX9M/NGCHywvjI91ZJt20J6vm0X6KbVV/ebQD/eoJ21xzPhG9M
gN7oRcZ9SW3e/AdtdnlqB0PEP+cyGwM=
=9Ji+
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.0-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix an uninitialized variable in file_getattr().
The flags_valid field wasn't initialized before calling
vfs_fileattr_get(), triggering KMSAN uninit-value reports in fuse
- Fix writeback wakeup and logging timeouts when DETECT_HUNG_TASK is
not enabled.
sysctl_hung_task_timeout_secs is 0 in that case causing spurious
"waiting for writeback completion for more than 1 seconds" warnings
- Fix a null-ptr-deref in do_statmount() when the mount is internal
- Add missing kernel-doc description for the @private parameter in
iomap_readahead()
- Fix mount namespace creation to hold namespace_sem across the mount
copy in create_new_namespace().
The previous drop-and-reacquire pattern was fragile and failed to
clean up mount propagation links if the real rootfs was a shared or
dependent mount
- Fix /proc mount iteration where m->index wasn't updated when
m->show() overflows, causing a restart to repeatedly show the same
mount entry in a rapidly expanding mount table
- Return EFSCORRUPTED instead of ENOSPC in minix_new_inode() when the
inode number is out of range
- Fix unshare(2) when CLONE_NEWNS is set and current->fs isn't shared.
copy_mnt_ns() received the live fs_struct so if a subsequent
namespace creation failed the rollback would leave pwd and root
pointing to detached mounts. Always allocate a new fs_struct when
CLONE_NEWNS is requested
- fserror bug fixes:
- Remove the unused fsnotify_sb_error() helper now that all callers
have been converted to fserror_report_metadata
- Fix a lockdep splat in fserror_report() where igrab() takes
inode::i_lock which can be held in IRQ context.
Replace igrab() with a direct i_count bump since filesystems
should not report inodes that are about to be freed or not yet
exposed
- Handle error pointer in procfs for try_lookup_noperm()
- Fix an integer overflow in ep_loop_check_proc() where recursive calls
returning INT_MAX would overflow when +1 is added, breaking the
recursion depth check
- Fix a misleading break in pidfs
* tag 'vfs-7.0-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pidfs: avoid misleading break
eventpoll: Fix integer overflow in ep_loop_check_proc()
proc: Fix pointer error dereference
fserror: fix lockdep complaint when igrabbing inode
fsnotify: drop unused helper
unshare: fix unshare_fs() handling
minix: Correct errno in minix_new_inode
namespace: fix proc mount iteration
mount: hold namespace_sem across copy in create_new_namespace()
iomap: Describe @private in iomap_readahead()
statmount: Fix the null-ptr-deref in do_statmount()
writeback: Fix wakeup and logging timeouts for !DETECT_HUNG_TASK
fs: init flags_valid before calling vfs_fileattr_get
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The m->index isn't updated when m->show() overflows and retains its
value before the current mount causing a restart to start at the same
value. If that happens in short order to due a quickly expanding mount
table this would cause the same mount to be shown again and again.
Ensure that *pos always equals the mount id of the mount that was
returned by start/next. On restart after overflow mnt_find_id_at(*pos)
finds the exact mount. This should avoid duplicates, avoid skips and
should handle concurrent modification just fine.
Cc: <stable@vger.kernel.org>
Fixed: 2eea9ce431 ("mounts: keep list of mounts in an rbtree")
Link: https://patch.msgid.link/20260129-geleckt-treuhand-4bb940acacd9@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
Fix an oversight when creating a new mount namespace. If someone had the
bright idea to make the real rootfs a shared or dependent mount and it
is later copied the copy will become a peer of the old real rootfs mount
or a dependent mount of it. The namespace semaphore is dropped and we
use mount lock exact to lock the new real root mount. If that fails or
the subsequent do_loopback() fails we rely on the copy of the real root
mount to be cleaned up by path_put(). The problem is that this doesn't
deal with mount propagation and will leave the mounts linked in the
propagation lists.
When creating a new mount namespace create_new_namespace() first
acquires namespace_sem to clone the nullfs root, drops it, then
reacquires it via LOCK_MOUNT_EXACT which takes inode_lock first to
respect the inode_lock -> namespace_sem lock ordering. This
drop-and-reacquire pattern is fragile and was the source of the
propagation cleanup bug fixed in the preceding commit.
Extend lock_mount_exact() with a copy_mount mode that clones the mount
under the locks atomically. When copy_mount is true, path_overmounted()
is skipped since we're copying the mount, not mounting on top of it -
the nullfs root always has rootfs mounted on top so the check would
always fail. If clone_mnt() fails after get_mountpoint() has pinned the
mountpoint, __unlock_mount() is used to properly unpin the mountpoint
and release both locks.
This allows create_new_namespace() to use LOCK_MOUNT_EXACT_COPY which
takes inode_lock and namespace_sem once and holds them throughout the
clone and subsequent mount operations, eliminating the
drop-and-reacquire pattern entirely.
Reported-by: syzbot+a89f9434fb5a001ccd58@syzkaller.appspotmail.com
Fixes: 9b8a0ba682 ("mount: add OPEN_TREE_NAMESPACE") # mainline only
Link: https://lore.kernel.org/699047f6.050a0220.2757fb.0024.GAE@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
[mostly] sanitize struct filename hanling
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCaYlcJgAKCRBZ7Krx/gZQ
6xlKAP9c9J13sJ/mcobsj1Ov7nSHISNbnYqvRRCu09Wq3UQvJgEApNQYOEdLtpff
zUnWOAQ0nOKY7w9VMLkRRustXpuGjAc=
=Fld4
-----END PGP SIGNATURE-----
Merge tag 'pull-filename' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs 'struct filename' updates from Al Viro:
"[Mostly] sanitize struct filename handling"
* tag 'pull-filename' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (68 commits)
sysfs(2): fs_index() argument is _not_ a pathname
alpha: switch osf_mount() to strndup_user()
ksmbd: use CLASS(filename_kernel)
mqueue: switch to CLASS(filename)
user_statfs(): switch to CLASS(filename)
statx: switch to CLASS(filename_maybe_null)
quotactl_block(): switch to CLASS(filename)
chroot(2): switch to CLASS(filename)
move_mount(2): switch to CLASS(filename_maybe_null)
namei.c: switch user pathname imports to CLASS(filename{,_flags})
namei.c: convert getname_kernel() callers to CLASS(filename_kernel)
do_f{chmod,chown,access}at(): use CLASS(filename_uflags)
do_readlinkat(): switch to CLASS(filename_flags)
do_sys_truncate(): switch to CLASS(filename)
do_utimes_path(): switch to CLASS(filename_uflags)
chdir(2): unspaghettify a bit...
do_fchownat(): unspaghettify a bit...
fspick(2): use CLASS(filename_flags)
name_to_handle_at(): use CLASS(filename_uflags)
vfs_open_tree(): use CLASS(filename_uflags)
...
Please consider pulling these changes from the signed vfs-7.0-rc1.misc tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaYX49QAKCRCRxhvAZXjc
ojrZAQD1VJzY46r5FnAVf4jlEHyjIbDnZCP/n+c4x6XnqpU6EQEAgB0yAtAGP6+u
SBuytElqHoTT5VtmEXTAabCNQ9Ks8wo=
=JwZz
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.0-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains a mix of VFS cleanups, performance improvements, API
fixes, documentation, and a deprecation notice.
Scalability and performance:
- Rework pid allocation to only take pidmap_lock once instead of
twice during alloc_pid(), improving thread creation/teardown
throughput by 10-16% depending on false-sharing luck. Pad the
namespace refcount to reduce false-sharing
- Track file lock presence via a flag in ->i_opflags instead of
reading ->i_flctx, avoiding false-sharing with ->i_readcount on
open/close hot paths. Measured 4-16% improvement on 24-core
open-in-a-loop benchmarks
- Use a consume fence in locks_inode_context() to match the
store-release/load-consume idiom, eliminating a hardware fence on
some architectures
- Annotate cdev_lock with __cacheline_aligned_in_smp to prevent
false-sharing
- Remove a redundant DCACHE_MANAGED_DENTRY check in
__follow_mount_rcu() that never fires since the caller already
verifies it, eliminating a 100% mispredicted branch
- Fix a 100% mispredicted likely() in devcgroup_inode_permission()
that became wrong after a prior code reorder
Bug fixes and correctness:
- Make insert_inode_locked() wait for inode destruction instead of
skipping, fixing a corner case where two matching inodes could
exist in the hash
- Move f_mode initialization before file_ref_init() in alloc_file()
to respect the SLAB_TYPESAFE_BY_RCU ordering contract
- Add a WARN_ON_ONCE guard in try_to_free_buffers() for folios with
no buffers attached, preventing a null pointer dereference when
AS_RELEASE_ALWAYS is set but no release_folio op exists
- Fix select restart_block to store end_time as timespec64, avoiding
truncation of tv_sec on 32-bit architectures
- Make dump_inode() use get_kernel_nofault() to safely access inode
and superblock fields, matching the dump_mapping() pattern
API modernization:
- Make posix_acl_to_xattr() allocate the buffer internally since
every single caller was doing it anyway. Reduces boilerplate and
unnecessary error checking across ~15 filesystems
- Replace deprecated simple_strtoul() with kstrtoul() for the
ihash_entries, dhash_entries, mhash_entries, and mphash_entries
boot parameters, adding proper error handling
- Convert chardev code to use guard(mutex) and __free(kfree) cleanup
patterns
- Replace min_t() with min() or umin() in VFS code to avoid silently
truncating unsigned long to unsigned int
- Gate LOOKUP_RCU assertions behind CONFIG_DEBUG_VFS since callers
already check the flag
Deprecation:
- Begin deprecating legacy BSD process accounting (acct(2)). The
interface has numerous footguns and better alternatives exist
(eBPF)
Documentation:
- Fix and complete kernel-doc for struct export_operations, removing
duplicated documentation between ReST and source
- Fix kernel-doc warnings for __start_dirop() and ilookup5_nowait()
Testing:
- Add a kunit test for initramfs cpio handling of entries with
filesize > PATH_MAX
Misc:
- Add missing <linux/init_task.h> include in fs_struct.c"
* tag 'vfs-7.0-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (28 commits)
posix_acl: make posix_acl_to_xattr() alloc the buffer
fs: make insert_inode_locked() wait for inode destruction
initramfs_test: kunit test for cpio.filesize > PATH_MAX
fs: improve dump_inode() to safely access inode fields
fs: add <linux/init_task.h> for 'init_fs'
docs: exportfs: Use source code struct documentation
fs: move initializing f_mode before file_ref_init()
exportfs: Complete kernel-doc for struct export_operations
exportfs: Mark struct export_operations functions at kernel-doc
exportfs: Fix kernel-doc output for get_name()
acct(2): begin the deprecation of legacy BSD process accounting
device_cgroup: remove branch hint after code refactor
VFS: fix __start_dirop() kernel-doc warnings
fs: Describe @isnew parameter in ilookup5_nowait()
fs/namei: Remove redundant DCACHE_MANAGED_DENTRY check in __follow_mount_rcu
fs: only assert on LOOKUP_RCU when built with CONFIG_DEBUG_VFS
select: store end_time as timespec64 in restart block
chardev: Switch to guard(mutex) and __free(kfree)
namespace: Replace simple_strtoul with kstrtoul to parse boot params
dcache: Replace simple_strtoul with kstrtoul in set_dhash_entries
...
Please consider pulling these changes from the signed vfs-7.0-rc1.namespace tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaYX49gAKCRCRxhvAZXjc
ovzgAP9BpqMQhMy2VCurru8/T5VAd6eJdgXzEfXqMksL5BNm8gEAsLx666KJNKgm
Sh/yVA2KBjf51gvcLZ4gHOISaMU8bAI=
=RGLf
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.0-rc1.namespace' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
- statmount: accept fd as a parameter
Extend struct mnt_id_req with a file descriptor field and a new
STATMOUNT_BY_FD flag. When set, statmount() returns mount information
for the mount the fd resides on — including detached mounts
(unmounted via umount2(MNT_DETACH)).
For detached mounts the STATMOUNT_MNT_POINT and STATMOUNT_MNT_NS_ID
mask bits are cleared since neither is meaningful. The capability
check is skipped for STATMOUNT_BY_FD since holding an fd already
implies prior access to the mount and equivalent information is
available through fstatfs() and /proc/pid/mountinfo without
privilege. Includes comprehensive selftests covering both attached
and detached mount cases.
- fs: Remove internal old mount API code (1 patch)
Now that every in-tree filesystem has been converted to the new
mount API, remove all the legacy shim code in fs_context.c that
handled unconverted filesystems. This deletes ~280 lines including
legacy_init_fs_context(), the legacy_fs_context struct, and
associated wrappers. The mount(2) syscall path for userspace remains
untouched. Documentation references to the legacy callbacks are
cleaned up.
- mount: add OPEN_TREE_NAMESPACE to open_tree()
Container runtimes currently use CLONE_NEWNS to copy the caller's
entire mount namespace — only to then pivot_root() and recursively
unmount everything they just copied. With large mount tables and
thousands of parallel container launches this creates significant
contention on the namespace semaphore.
OPEN_TREE_NAMESPACE copies only the specified mount tree (like
OPEN_TREE_CLONE) but returns a mount namespace fd instead of a
detached mount fd. The new namespace contains the copied tree mounted
on top of a clone of the real rootfs.
This functions as a combined unshare(CLONE_NEWNS) + pivot_root() in a
single syscall. Works with user namespaces: an unshare(CLONE_NEWUSER)
followed by OPEN_TREE_NAMESPACE creates a mount namespace owned by
the new user namespace. Mount namespace file mounts are excluded from
the copy to prevent cycles. Includes ~1000 lines of selftests"
* tag 'vfs-7.0-rc1.namespace' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/open_tree: add OPEN_TREE_NAMESPACE tests
mount: add OPEN_TREE_NAMESPACE
fs: Remove internal old mount API code
selftests: statmount: tests for STATMOUNT_BY_FD
statmount: accept fd as a parameter
statmount: permission check should return EPERM
When creating containers the setup usually involves using CLONE_NEWNS
via clone3() or unshare(). This copies the caller's complete mount
namespace. The runtime will also assemble a new rootfs and then use
pivot_root() to switch the old mount tree with the new rootfs. Afterward
it will recursively umount the old mount tree thereby getting rid of all
mounts.
On a basic system here where the mount table isn't particularly large
this still copies about 30 mounts. Copying all of these mounts only to
get rid of them later is pretty wasteful.
This is exacerbated if intermediary mount namespaces are used that only
exist for a very short amount of time and are immediately destroyed
again causing a ton of mounts to be copied and destroyed needlessly.
With a large mount table and a system where thousands or ten-thousands
of containers are spawned in parallel this quickly becomes a bottleneck
increasing contention on the semaphore.
Extend open_tree() with a new OPEN_TREE_NAMESPACE flag. Similar to
OPEN_TREE_CLONE only the indicated mount tree is copied. Instead of
returning a file descriptor referring to that mount tree
OPEN_TREE_NAMESPACE will cause open_tree() to return a file descriptor
to a new mount namespace. In that new mount namespace the copied mount
tree has been mounted on top of a copy of the real rootfs.
The caller can setns() into that mount namespace and perform any
additionally required setup such as move_mount() detached mounts in
there.
This allows OPEN_TREE_NAMESPACE to function as a combined
unshare(CLONE_NEWNS) and pivot_root().
A caller may for example choose to create an extremely minimal rootfs:
fd_mntns = open_tree(-EBADF, "/var/lib/containers/wootwoot", OPEN_TREE_NAMESPACE);
This will create a mount namespace where "wootwoot" has become the
rootfs mounted on top of the real rootfs. The caller can now setns()
into this new mount namespace and assemble additional mounts.
This also works with user namespaces:
unshare(CLONE_NEWUSER);
fd_mntns = open_tree(-EBADF, "/var/lib/containers/wootwoot", OPEN_TREE_NAMESPACE);
which creates a new mount namespace owned by the earlier created user
namespace with "wootwoot" as the rootfs mounted on top of the real
rootfs.
Link: https://patch.msgid.link/20251229-work-empty-namespace-v1-1-bfb24c7b061f@kernel.org
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Suggested-by: Christian Brauner <brauner@kernel.org>
Suggested-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Remove the "nullfs_rootfs" boot parameter and simply always use nullfs.
The mutable rootfs will be mounted on top of it. Systems that don't use
pivot_root() to pivot away from the real rootfs will have an additional
mount stick around but that shouldn't be a problem at all. If it is
we'll rever this commit.
This also simplifies the boot process and removes the need for the
traditional switch_root workarounds.
Suggested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Currently pivot_root() doesn't work on the real rootfs because it
cannot be unmounted. Userspace has to do a recursive removal of the
initramfs contents manually before continuing the boot.
Really all we want from the real rootfs is to serve as the parent mount
for anything that is actually useful such as the tmpfs or ramfs for
initramfs unpacking or the rootfs itself. There's no need for the real
rootfs to actually be anything meaningful or useful. Add a immutable
rootfs called "nullfs" that can be selected via the "nullfs_rootfs"
kernel command line option.
The kernel will mount a tmpfs/ramfs on top of it, unpack the initramfs
and fire up userspace which mounts the rootfs and can then just do:
chdir(rootfs);
pivot_root(".", ".");
umount2(".", MNT_DETACH);
and be done with it. (Ofc, userspace can also choose to retain the
initramfs contents by using something like pivot_root(".", "/initramfs")
without unmounting it.)
Technically this also means that the rootfs mount in unprivileged
namespaces doesn't need to become MNT_LOCKED anymore as it's guaranteed
that the immutable rootfs remains permanently empty so there cannot be
anything revealed by unmounting the covering mount.
In the future this will also allow us to create completely empty mount
namespaces without risking to leak anything.
systemd already handles this all correctly as it tries to pivot_root()
first and falls back to MS_MOVE only when that fails.
This goes back to various discussion in previous years and a LPC 2024
presentation about this very topic.
Link: https://patch.msgid.link/20260112-work-immutable-rootfs-v2-3-88dd1c34a204@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
and the rootfs get mount id one as it always has. Before we actually
mount the rootfs we create an internal tmpfs mount which has mount id
zero but is never exposed anywhere. Continue that "tradition".
Link: https://patch.msgid.link/20260112-work-immutable-rootfs-v2-1-88dd1c34a204@kernel.org
Fixes: 7f9bfafc5f ("fs: use xarray for old mount id")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Replace simple_strtoul() with the recommended kstrtoul() for parsing the
'mhash_entries=' and 'mphash_entries=' boot parameters.
Check the return value of kstrtoul() and reject invalid values. This
adds error handling while preserving behavior for existing values, and
removes use of the deprecated simple_strtoul() helper.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20251214153141.218953-2-thorsten.blum@linux.dev
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Extend `struct mnt_id_req` to take in a fd and introduce STATMOUNT_BY_FD
flag. When a valid fd is provided and STATMOUNT_BY_FD is set, statmount
will return mountinfo about the mount the fd is on.
This even works for "unmounted" mounts (mounts that have been umounted
using umount2(mnt, MNT_DETACH)), if you have access to a file descriptor
on that mount. These "umounted" mounts will have no mountpoint and no
valid mount namespace. Hence, we unset the STATMOUNT_MNT_POINT and
STATMOUNT_MNT_NS_ID in statmount.mask for "unmounted" mounts.
In case of STATMOUNT_BY_FD, given that we already have access to an fd
on the mount, accessing mount information without a capability check
seems fine because of the following reasons:
- All fs related information is available via fstatfs() without any
capability check.
- Mount information is also available via /proc/pid/mountinfo (without
any capability check).
- Given that we have access to a fd on the mount which tells us that we
had access to the mount at some point (or someone that had access gave
us the fd). So, we should be able to access mount info.
Co-developed-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Bhavik Sachdev <b.sachdev1904@gmail.com>
Link: https://patch.msgid.link/20251129091455.757724-3-b.sachdev1904@gmail.com
Acked-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Currently, statmount() returns ENOENT when caller is not CAP_SYS_ADMIN
in the user namespace owner of target mount namespace. This should be
EPERM instead.
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Bhavik Sachdev <b.sachdev1904@gmail.com>
Link: https://patch.msgid.link/20251129091455.757724-2-b.sachdev1904@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaSmOZwAKCRCRxhvAZXjc
op0AAP4oNVJkFyvgKoPos5K2EGFB8M7merGhpYtsOoeg8UK6OwD/UySQErHsXQDR
sUDDa5uFOhfrkcfM8REtAN4wF8p5qAc=
=QgFD
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.19-rc1.fd_prepare.fs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fd prepare updates from Christian Brauner:
"This adds the FD_ADD() and FD_PREPARE() primitive. They simplify the
common pattern of get_unused_fd_flags() + create file + fd_install()
that is used extensively throughout the kernel and currently requires
cumbersome cleanup paths.
FD_ADD() - For simple cases where a file is installed immediately:
fd = FD_ADD(O_CLOEXEC, vfio_device_open_file(device));
if (fd < 0)
vfio_device_put_registration(device);
return fd;
FD_PREPARE() - For cases requiring access to the fd or file, or
additional work before publishing:
FD_PREPARE(fdf, O_CLOEXEC, sync_file->file);
if (fdf.err) {
fput(sync_file->file);
return fdf.err;
}
data.fence = fd_prepare_fd(fdf);
if (copy_to_user((void __user *)arg, &data, sizeof(data)))
return -EFAULT;
return fd_publish(fdf);
The primitives are centered around struct fd_prepare. FD_PREPARE()
encapsulates all allocation and cleanup logic and must be followed by
a call to fd_publish() which associates the fd with the file and
installs it into the caller's fdtable. If fd_publish() isn't called,
both are deallocated automatically. FD_ADD() is a shorthand that does
fd_publish() immediately and never exposes the struct to the caller.
I've implemented this in a way that it's compatible with the cleanup
infrastructure while also being usable separately. IOW, it's centered
around struct fd_prepare which is aliased to class_fd_prepare_t and so
we can make use of all the basica guard infrastructure"
* tag 'vfs-6.19-rc1.fd_prepare.fs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (42 commits)
io_uring: convert io_create_mock_file() to FD_PREPARE()
file: convert replace_fd() to FD_PREPARE()
vfio: convert vfio_group_ioctl_get_device_fd() to FD_ADD()
tty: convert ptm_open_peer() to FD_ADD()
ntsync: convert ntsync_obj_get_fd() to FD_PREPARE()
media: convert media_request_alloc() to FD_PREPARE()
hv: convert mshv_ioctl_create_partition() to FD_ADD()
gpio: convert linehandle_create() to FD_PREPARE()
pseries: port papr_rtas_setup_file_interface() to FD_ADD()
pseries: convert papr_platform_dump_create_handle() to FD_ADD()
spufs: convert spufs_gang_open() to FD_PREPARE()
papr-hvpipe: convert papr_hvpipe_dev_create_handle() to FD_PREPARE()
spufs: convert spufs_context_open() to FD_PREPARE()
net/socket: convert __sys_accept4_file() to FD_ADD()
net/socket: convert sock_map_fd() to FD_ADD()
net/kcm: convert kcm_ioctl() to FD_PREPARE()
net/handshake: convert handshake_nl_accept_doit() to FD_PREPARE()
secretmem: convert memfd_secret() to FD_ADD()
memfd: convert memfd_create() to FD_ADD()
bpf: convert bpf_token_create() to FD_PREPARE()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaSmOZwAKCRCRxhvAZXjc
ov48AP4qgtSo78euYDtsxkgU1IKRow1Hc3L/rql6uIP7dFtQ8AEAjZjCMK3vDSZy
DUqStlgPZ3/GWyzdnDKOoAuwvn56gQQ=
=KElr
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.19-rc1.autofs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull autofs update from Christian Brauner:
"Prevent futile mount triggers in private mount namespaces.
Fix a problematic loop in autofs when a mount namespace contains
autofs mounts that are propagation private and there is no
namespace-specific automount daemon to handle possible automounting.
Previously, attempted path resolution would loop until MAXSYMLINKS was
reached before failing, causing significant noise in the log.
The fix adds a check in autofs ->d_automount() so that the VFS can
immediately return EPERM in this case. Since the mount is propagation
private, EPERM is the most appropriate error code"
* tag 'vfs-6.19-rc1.autofs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
autofs: dont trigger mount if it cant succeed
