data fixes for things that weren't used yet. One thing that's new here in the
core is SSC spread spectrum support (SSC) in the clk provider API. The idea is
that DT authors will configure SSC for certain clks and they'll be configured
at clk provider registration time or when a consumer device is probed, similar
to how we handle assigned clk rates or parents.
On the clk driver side we have Qualcomm adding almost half the diff because
they add support for 4 different SoCs and then a long tail of other SoCs like
Mediatek, Renesas, Rockchip, SpaceMiT, etc. add more SoC support this time
around. Luckily it's mostly clk data for these new SoCs because the actual
clk_ops are already there. Beyond the new drivers we get all the little fixups
for more compilation coverage or usage of more modern APIs. That all looks
normal.
Finally, I kinda buried the lead, I'm bringing on Brian and Jerome to help out
with maintaining the clk subsystem. The current working model is already
semi-distributed in that silicon vendors typically take care of their drivers
and send me pull requests but I'm becoming a bottleneck for new drivers and
core framework review because this has become a 100% volunteer effort on my
part. Mike is stepping down after all these years (thanks Mike!) and that jump
started the conversation around finding co-maintainers. Brian and Jerome have
graciously offered to help me with the work load, meaning in the future they'll
be sending pull requests and committing directly to the clk.git tree. They've
both been around on the list for a while, I've met them both in person, and
they've been making changes to the core clk framework along with helping review
patches so I'm pretty confident this will work well.
Core:
- devm_clk_bulk_get_enable() consumer API
- devm_clk_hw_register_composite_pdata() provider API
- Spread Spectrum Clock (SSC) support via DT bindings and provider APIs
- Divider clk rounding improved (and tested)
New Drivers:
- Cix Sky1 audio subsystem (AUDSS)
- UltraRISC DP1000
- MediaTek MT8173 MFG_TOP
- Si549
- Aspeed AST2700 PECI
- Airoha EN7523 PCIe
- Rockchip RV1106
- Mobileye EyeQ7H
- Qualcomm Maili GCC, TCSR, RPMh, and video clks
- Qualcomm Shikra GCC, RPM, GPU, display, and audio clks
- Qualcomm Nord display and graphics clks
- Qualcomm Glymur camera and EVA clks
- Qualcomm Hawi video clks
- Amlogic A9 AO and peripheral clks
- Renesas R-Car X5H (R8A78000) CPG
-----BEGIN PGP SIGNATURE-----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=iYa8
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Mostly the usual clk driver updates and new SoC additions plus
non-critical data fixes for things that weren't used yet.
One thing that's new here in the core is SSC spread spectrum support
(SSC) in the clk provider API. The idea is that DT authors will
configure SSC for certain clks and they'll be configured at clk
provider registration time or when a consumer device is probed,
similar to how we handle assigned clk rates or parents.
On the clk driver side we have Qualcomm adding almost half the diff
because they add support for 4 different SoCs and then a long tail of
other SoCs like Mediatek, Renesas, Rockchip, SpaceMiT, etc. add more
SoC support this time around. Luckily it's mostly clk data for these
new SoCs because the actual clk_ops are already there. Beyond the new
drivers we get all the little fixups for more compilation coverage or
usage of more modern APIs. That all looks normal.
Finally, I kinda buried the lede, I'm bringing on Brian and Jerome to
help out with maintaining the clk subsystem. The current working model
is already semi-distributed in that silicon vendors typically take
care of their drivers and send me pull requests but I'm becoming a
bottleneck for new drivers and core framework review because this has
become a 100% volunteer effort on my part.
Mike is stepping down after all these years (thanks Mike!) and that
jump started the conversation around finding co-maintainers. Brian and
Jerome have graciously offered to help me with the work load, meaning
in the future they'll be sending pull requests and committing directly
to the clk.git tree. They've both been around on the list for a while,
I've met them both in person, and they've been making changes to the
core clk framework along with helping review patches so I'm pretty
confident this will work well.
Core:
- devm_clk_bulk_get_enable() consumer API
- devm_clk_hw_register_composite_pdata() provider API
- Spread Spectrum Clock (SSC) support via DT bindings and provider APIs
- Divider clk rounding improved (and tested)
New Drivers:
- Cix Sky1 audio subsystem (AUDSS)
- UltraRISC DP1000
- MediaTek MT8173 MFG_TOP
- Si549
- Aspeed AST2700 PECI
- Airoha EN7523 PCIe
- Rockchip RV1106
- Mobileye EyeQ7H
- Qualcomm Maili GCC, TCSR, RPMh, and video clks
- Qualcomm Shikra GCC, RPM, GPU, display, and audio clks
- Qualcomm Nord display and graphics clks
- Qualcomm Glymur camera and EVA clks
- Qualcomm Hawi video clks
- Amlogic A9 AO and peripheral clks
- Renesas R-Car X5H (R8A78000) CPG"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (269 commits)
clk: microchip: mpfs: fix regmap_update_bits() mask/val order
clk: visconti: Make sure clk_init_data is fully initialized
clk: ti: Make sure clk_init_data is fully initialized
MAINTAINERS: Add Brian Masney and Jerome Brunet as co-maintainers for clk subsystem
Drop Michael Turquette's clk maintainer entry
clk: ti: composite: resolve parent clocks by DT index, not by name
clk: ti: mux: resolve parent clocks by DT index, not by name
clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate()
dt-bindings: clock: ti,keystone-gate: Convert to DT schema
dt-bindings: clock: ti: Convert APLL clock to DT schema
clk: zynq: pll: Fix kernel-doc after determine_rate() conversion
dt-bindings: clock: ti,clockdomain: Convert to DT schema
dt-bindings: clock: Correct white-space style
clk: samsung: Don't include <linux/mod_devicetable.h>
clk: at91: Read "reg" with helper
clk: renesas: Add R-Car X5H CPG driver
clk: rockchip: rk3576: fix source muxes for SPI0..SPI4
clk: rockchip: Add clock controller for the RV1106
dt-bindings: clock: rockchip: Add RV1106 CRU support
dt-bindings: clock: Document Renesas R-Car X5H Clock Pulse Generator
...
- container_of:
- Apply typeof_member(), remove the local __mptr variable to eliminate
variable shadowing warnings on nested container_of() calls, and remove
unnecessary parentheses.
- core:
- Add driver name to probe debug print for initcall_debug.
- Avoid repeatedly printing the same 'Fixed dependency cycle' log.
- Unwind device_add() on attribute creation failure in
attribute_container_add_class_device().
- Remove statistics group if encryption group creation fails in
transport_add_class_device().
- debugfs:
- Fix lockdown check for mmap_prepare().
- Warn if file creation failed due to uninitialized debugfs.
- device property:
- Implement fw_devlink support for software nodes by adding
software_node_add_links(), which creates fwnode links from DEV_PROP_REF
properties to enable automatic probe ordering. Add kunit-managed fwnode
helpers and test coverage.
- Fix infinite loop in fwnode_for_each_child_node() when the secondary fwnode
has more than one child. Add test cases.
- Fix out-of-bounds access in software_node_get_reference_args() when called
with index -1 (UINT_MAX).
- Refactor to use RAII approach with __free().
- Add Bartosz Golaszewski as software node reviewer.
- firmware loader:
- Fix race where a sysfs fallback request can complete before being queued as
pending, leading to a use-after-free on the next fallback request.
- Reject 0-size built-in firmware and fail the build on empty firmware files
in CONFIG_EXTRA_FIRMWARE.
- kobject:
- Provide __KOBJ_ATTR() and __KOBJ_ATTR_RO/WO() initialization macros and
allow the constification of kobject attributes, enabling them to reside in
read-only memory.
- platform:
- Provide platform_device_set_of_node(), platform_device_set_fwnode(), and
platform_device_set_of_node_from_dev() helpers that encapsulate firmware
node reference counting for dynamically allocated platform devices. Convert
all in-tree users that manually assigned dev.of_node or dev.fwnode, fixing a
pre-existing refcount bug in powermac. Switch to counting references of all
firmware node types, not only OF nodes.
- Unify the release path for dynamically allocated platform devices by
removing platform_device_release_full(). Amend the fwnode setter API
contract to warn if a primary software node is overwritten. Add KUnit tests
for correct software node removal on device unregistration.
- Rust:
- Auxiliary:
- Add registration_data_with() closure-based API for invariant ForLt types.
- Debugfs:
- Migrate BinaryWriter and BinaryReaderMut trait requirements from
kernel::transmute traits to zerocopy traits.
- Device:
- Add BoundInternal device context and InternalBoundContext trait for bus
abstractions that need internal access to a bound device.
- Make the lifetime on Core and CoreInternal invariant to prevent coercion
to shorter lifetimes.
- Devres:
- Fix race between concurrent revokers where the losing revoker could return
before the winning revoker finished dropping the inner data, causing
use-after-free.
- Ensure revocation is complete before the device finishes unbinding by
making the synchronization bidirectional.
- Add DevresLt<F: ForLt>, a wrapper around Devres that shortens 'static back
to the caller's borrow scope. Implement ForLt and CovariantForLt for Bar,
IoMem, and ExclusiveIoMem.
- Driver:
- Switch from index-based to pointer-based device ID info lookup, storing
static references in driver_data. Centralize device ID handling in
device_id.rs, removing the open-coded ACPI/OF matching logic and duplicate
ID table from driver.rs.
- I/O:
- Make I/O regions typed (with a dynamically-sized Region type for the
existing untyped case), create view types representing subregions of a
mapped I/O region, and add io_project!() for safely creating subviews.
- Split Io into a base trait (IoBase) and an extension trait (Io) with a
blanket implementation, preventing implementers from overriding provided
methods that unsafe code relies on.
- Add a SysMem backend for shared system memory with volatile access, and
make Coherent implement Io via an I/O view type. Add IoSysMap as sum type
of Mmio and SysMem. Add copying methods (memcpy_{from,to}io()) and
read_val()/write_val() for typed access.
- Replace dma_read!()/dma_write!() with io_read!()/io_write!() for
primitives and copying methods for aggregates; drop the old macros.
Convert nova-core to use I/O projection.
- Fix internal shortcut rule dispatch in the register!() macro, remove
unused rule arguments, and use path fragments for alias destinations.
- IRQ:
- Make irq::Registration compatible with lifetime-bound drivers by
removing the 'static bound on Handler/ThreadedHandler and
replacing Devres<RegistrationInner> with direct
request_irq()/free_irq() calls. Handlers can now directly own
lifetime-bound device resources.
- PCI:
- Convert IrqVectorRegistration to a lifetime-annotated owning type,
giving drivers explicit control over the allocation lifetime.
IrqVector embeds a resolved IrqRequest, making the conversion
infallible. Remove the redundant
request_irq()/request_threaded_irq() wrappers from pci::Device.
- Add pci_irq_type() C helper and expose it via irq_type() on
IrqVectorRegistration and IrqVector, returning PCI_IRQ_MSIX, PCI_IRQ_MSI,
or PCI_IRQ_INTX.
- Mark pci::Device refcount methods inline.
- Serdev:
- Add Rust abstractions for the serial device bus, including serdev::Driver
trait, serdev::Device wrapping struct serdev_device, and serdev::Adapter
implementing RegistrationOps. Includes a sample driver. Markus Probst
takes over as serdev maintainer for both C and Rust code.
- Misc:
- Split ForLt into a base trait (providing the Of<'a> GAT) and an unsafe
CovariantForLt subtrait guaranteeing covariance, enabling invariant types
(e.g. those containing Mutex<&'bound T>) to participate in the ForLt
abstraction.
- Fix Coherent read past EOF returning -ERANGE instead of zero.
- Fix firmware example UB by avoiding null-pointer ARef.
- misc:
- Avoid iattr allocation in kernfs listxattr by using kernfs_iattrs_noalloc().
- Unregister SoC bus on early device registration failure.
- Remove unused DMA_FENCE_TRACE Kconfig symbol.
- Fix /sys/module path in comment.
- Refactor ISA bus init to remove nested blocks.
- Remove redundant nodemask clears in numa_init().
- Add kernel-doc for fwnode_operations and sys_soc.h, mark internal property
data as private for kernel-doc, and add property.h/fwnode.h to driver-api
infrastructure docs.
- Add MAINTAINERS entry for sys_soc.h.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaoSPugAKCRBFlHeO1qrK
LlBrAP958EaYZVyfAsqq0EyHv86ahXKWoDDvkwbRUZA5CfV9tAD/bMWVtPLRYaaq
eNEZT7p5w3Haezh61H3c5zpuwFNMTA0=
=VRIa
-----END PGP SIGNATURE-----
Merge tag 'driver-core-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"container_of:
- Apply typeof_member(), remove the local __mptr variable to
eliminate variable shadowing warnings on nested container_of()
calls, and remove unnecessary parentheses
core:
- Add driver name to probe debug print for initcall_debug
- Avoid repeatedly printing the same 'Fixed dependency cycle' log
- Unwind device_add() on attribute creation failure in
attribute_container_add_class_device()
- Remove statistics group if encryption group creation fails in
transport_add_class_device()
debugfs:
- Fix lockdown check for mmap_prepare()
- Warn if file creation failed due to uninitialized debugfs
device property:
- Implement fw_devlink support for software nodes by adding
software_node_add_links(), which creates fwnode links from
DEV_PROP_REF properties to enable automatic probe ordering. Add
kunit-managed fwnode helpers and test coverage
- Fix infinite loop in fwnode_for_each_child_node() when the
secondary fwnode has more than one child. Add test cases
- Fix out-of-bounds access in software_node_get_reference_args() when
called with index -1 (UINT_MAX)
- Refactor to use RAII approach with __free()
- Add Bartosz Golaszewski as software node reviewer
firmware loader:
- Fix race where a sysfs fallback request can complete before being
queued as pending, leading to a use-after-free on the next fallback
request
- Reject 0-size built-in firmware and fail the build on empty
firmware files in CONFIG_EXTRA_FIRMWARE
kobject:
- Provide __KOBJ_ATTR() and __KOBJ_ATTR_RO/WO() initialization macros
and allow the constification of kobject attributes, enabling them
to reside in read-only memory
platform:
- Provide platform_device_set_of_node(), platform_device_set_fwnode(),
and platform_device_set_of_node_from_dev() helpers that encapsulate
firmware node reference counting for dynamically allocated platform
devices
Convert all in-tree users that manually assigned dev.of_node or
dev.fwnode, fixing a pre-existing refcount bug in powermac. Switch
to counting references of all firmware node types, not only OF
nodes
- Unify the release path for dynamically allocated platform devices
by removing platform_device_release_full(). Amend the fwnode setter
API contract to warn if a primary software node is overwritten. Add
KUnit tests for correct software node removal on device
unregistration
Rust:
- Auxiliary:
- Add registration_data_with() closure-based API for invariant
ForLt types
- Debugfs:
- Migrate BinaryWriter and BinaryReaderMut trait requirements
from kernel::transmute traits to zerocopy traits
- Device:
- Add BoundInternal device context and InternalBoundContext trait
for bus abstractions that need internal access to a bound
device.
- Make the lifetime on Core and CoreInternal invariant to prevent
coercion to shorter lifetimes
- Devres:
- Fix race between concurrent revokers where the losing revoker
could return before the winning revoker finished dropping the
inner data, causing use-after-free.
- Ensure revocation is complete before the device finishes
unbinding by making the synchronization bidirectional.
- Add DevresLt<F: ForLt>, a wrapper around Devres that shortens
'static back to the caller's borrow scope. Implement ForLt and
CovariantForLt for Bar, IoMem, and ExclusiveIoMem
- Driver:
- Switch from index-based to pointer-based device ID info lookup,
storing static references in driver_data. Centralize device ID
handling in device_id.rs, removing the open-coded ACPI/OF
matching logic and duplicate ID table from driver.rs
- I/O:
- Make I/O regions typed (with a dynamically-sized Region type
for the existing untyped case), create view types representing
subregions of a mapped I/O region, and add io_project!() for
safely creating subviews.
- Split Io into a base trait (IoBase) and an extension trait (Io)
with a blanket implementation, preventing implementers from
overriding provided methods that unsafe code relies on.
- Add a SysMem backend for shared system memory with volatile
access, and make Coherent implement Io via an I/O view type.
Add IoSysMap as sum type of Mmio and SysMem. Add copying
methods (memcpy_{from,to}io()) and read_val()/write_val() for
typed access.
- Replace dma_read!()/dma_write!() with io_read!()/io_write!()
for primitives and copying methods for aggregates; drop the old
macros. Convert nova-core to use I/O projection.
- Fix internal shortcut rule dispatch in the register!() macro,
remove unused rule arguments, and use path fragments for alias
destinations
- IRQ:
- Make irq::Registration compatible with lifetime-bound drivers
by removing the 'static bound on Handler/ThreadedHandler and
replacing Devres<RegistrationInner> with direct
request_irq()/free_irq() calls. Handlers can now directly own
lifetime-bound device resources
- PCI:
- Convert IrqVectorRegistration to a lifetime-annotated owning
type, giving drivers explicit control over the allocation
lifetime. IrqVector embeds a resolved IrqRequest, making the
conversion infallible. Remove the redundant
request_irq()/request_threaded_irq() wrappers from pci::Device.
- Add pci_irq_type() C helper and expose it via irq_type() on
IrqVectorRegistration and IrqVector, returning PCI_IRQ_MSIX,
PCI_IRQ_MSI, or PCI_IRQ_INTX.
- Mark pci::Device refcount methods inline
- Serdev:
- Add Rust abstractions for the serial device bus, including
serdev::Driver trait, serdev::Device wrapping struct
serdev_device, and serdev::Adapter implementing
RegistrationOps. Includes a sample driver. Markus Probst takes
over as serdev maintainer for both C and Rust code
- Misc:
- Split ForLt into a base trait (providing the Of<'a> GAT) and an
unsafe CovariantForLt subtrait guaranteeing covariance,
enabling invariant types (e.g. those containing Mutex<&'bound T>)
to participate in the ForLt abstraction.
- Fix Coherent read past EOF returning -ERANGE instead of zero.
- Fix firmware example UB by avoiding null-pointer ARef
misc:
- Avoid iattr allocation in kernfs listxattr by using
kernfs_iattrs_noalloc().
- Unregister SoC bus on early device registration failure.
- Remove unused DMA_FENCE_TRACE Kconfig symbol.
- Fix /sys/module path in comment.
- Refactor ISA bus init to remove nested blocks.
- Remove redundant nodemask clears in numa_init().
- Add kernel-doc for fwnode_operations and sys_soc.h, mark
internal property data as private for kernel-doc, and add
property.h/fwnode.h to driver-api infrastructure docs.
- Add MAINTAINERS entry for sys_soc.h"
* tag 'driver-core-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (129 commits)
rust: pci: expose the allocated interrupt type
PCI: Add pci_irq_type() to query the allocated interrupt type
rust: pci: remove request_irq() and request_threaded_irq() from Device
rust: pci: resolve IRQ in index() and embed IrqRequest in IrqVector
rust: pci: convert IrqVectorRegistration to a lifetime-managed owning type
kernfs: avoid iattr allocation in listxattr
rust: serdev: use ThisModule::as_ptr() instead of field access
ACPI/IORT: use platform_device_set_fwnode()
ACPI/APMT: use platform_device_set_fwnode()
firmware_loader: do not queue completed sysfs fallback requests
rust: pci: Mark Device refcount methods inline
rust: irq: make Registration compatible with lifetime-bound drivers
rust: net/phy: remove expansion from doc
rust: dma: return zero for Coherent reads past EOF
rust: io: register: use path fragment for alias destination
rust: io: register: remove unused rule arguments
rust: io: register: dispatch shortcut rules internally
MAINTAINERS: add sys_soc.h to DRIVER CORE
rust: debugfs: remove unsafe blocks from traits impl for Vec
rust: debugfs: migrate debugfs traits requirements to zerocopy
...
Here's various improvements and fixes for the clk subsystem that was posted prior
to the opening of the last merge window.
- Add spread spectrum clock (SSC) support to the clk framework, including a new
assigned-clock-sscs devicetree property and clk_hw_set_spread_spectrum()
API with KUnit tests (Peng Fan)
- Add SCMI clock OEM extensions for the i.MX95 clock driver and introduce a
common SCMI clock header (Peng Fan)
- Add clock, reset, and devicetree bindings for the ESWIN EIC7700 HSP clock and
reset generator (Xuyang Dong)
- Add clk_determine_rate_noop() helper for clock drivers that can do any rate,
and convert existing open-coded implementations across hisilicon, imx, qcom,
renesas, rp1, samsung, scpi, sprd, mediatek phy, and mediatek pmdomain
drivers (Brian Masney)
- Add kernel-doc documentation for struct clk_core and the core clock flags,
and wire up clk identifiers into the documentation build (Brian Masney)
- Fix clk_divider_bestdiv() returning the minimum rate instead of the maximum
rate for large rate requests, with KUnit tests (Lad Prabhakar)
- Fix Nuvoton MA35D1 PLL frequency calculation including ignored div_u64
return values, incorrect PLL_CTL1_FRAC bit field width, and broken
determine_rate logic (Joey Lu)
- Support unique clock names for multi-socket Tegra platforms (Jon Hunter)
- Allow COMPILE_TEST builds for HiSilicon clock drivers (Rosen Penev)
- Various fixes and cleanups from Akari Tsuyukusa, Alexander A. Klimov,
Brian Masney, David Carlier, David Laight, Min zhang, Myeonghun Pak,
Pavel Löbl, Randy Dunlap, Rob Herring, Rosen Penev, Uwe Kleine-König,
William Theesfeld, Xuyang Dong, and Yu-Chun Lin
Signed-off-by: Brian Masney <bmasney@redhat.com>
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQSkbTJwWGWqPd7cKQS30t0nXX7AhwUCakLuwRYcbWFzbmV5YkBv
bnN0YXRpb24ub3JnAAoJELfS3SddfsCH1qIA/3OYdBm1fIrd/PumuFj/6xnito0J
nwY64dzlOm4kPVynAQDGDUxQMevRq8AFXh33kOh+cCFg7H9CXjF55ajB2TXaBg==
=1BFM
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=QbCr
-----END PGP SIGNATURE-----
Merge tag 'clk-misc-for-v7.3' of ssh://github.com/masneyb/linux into clk-pile
Pull clk patches picked up by Brian Masney:
Here's various improvements and fixes for the clk subsystem that was posted prior
to the opening of the last merge window.
- Add spread spectrum clock (SSC) support to the clk framework, including a new
assigned-clock-sscs devicetree property and clk_hw_set_spread_spectrum()
API with KUnit tests (Peng Fan)
- Add SCMI clock OEM extensions for the i.MX95 clock driver and introduce a
common SCMI clock header (Peng Fan)
- Add clock, reset, and devicetree bindings for the ESWIN EIC7700 HSP clock and
reset generator (Xuyang Dong)
- Add clk_determine_rate_noop() helper for clock drivers that can do any rate,
and convert existing open-coded implementations across hisilicon, imx, qcom,
renesas, rp1, samsung, scpi, sprd, mediatek phy, and mediatek pmdomain
drivers (Brian Masney)
- Add kernel-doc documentation for struct clk_core and the core clock flags,
and wire up clk identifiers into the documentation build (Brian Masney)
- Fix clk_divider_bestdiv() returning the minimum rate instead of the maximum
rate for large rate requests, with KUnit tests (Lad Prabhakar)
- Fix Nuvoton MA35D1 PLL frequency calculation including ignored div_u64
return values, incorrect PLL_CTL1_FRAC bit field width, and broken
determine_rate logic (Joey Lu)
- Support unique clock names for multi-socket Tegra platforms (Jon Hunter)
- Allow COMPILE_TEST builds for HiSilicon clock drivers (Rosen Penev)
- Various fixes and cleanups from Akari Tsuyukusa, Alexander A. Klimov,
Brian Masney, David Carlier, David Laight, Min zhang, Myeonghun Pak,
Pavel Löbl, Randy Dunlap, Rob Herring, Rosen Penev, Uwe Kleine-König,
William Theesfeld, Xuyang Dong, and Yu-Chun Lin
Signed-off-by: Brian Masney <bmasney@redhat.com>
[sboyd@kernel.org: Fix allmodconfig modpost failure in scmi]
* tag 'clk-misc-for-v7.3' of ssh://github.com/masneyb/linux: (53 commits)
pmdomain: mediatek: mtk-mfg: use clk_determine_rate_noop()
pmdomain: mediatek: airoha: use clk_determine_rate_noop()
phy: mediatek: phy-mtk-hdmi-mt2701: use clk_determine_rate_noop()
clk: sprd: use clk_determine_rate_noop()
clk: scpi: use clk_determine_rate_noop()
clk: samsung: acpm: use clk_determine_rate_noop()
clk: rp1: use clk_determine_rate_noop()
clk: renesas: rzg2l-cpg: use clk_determine_rate_noop()
clk: qcom: smd-rpm: use clk_determine_rate_noop()
clk: qcom: rpmh: use clk_determine_rate_noop()
clk: qcom: rpm: use clk_determine_rate_noop()
clk: imx: scu: use clk_determine_rate_noop()
clk: hisilicon: hi3660-stub: use clk_determine_rate_noop()
clk: add clk_determine_rate_noop()
clk: imx: scu: drop redundant init.ops variable assignment
clk: test: convert constants to use HZ_PER_MHZ
docs: clk: include some identifiers to keep documentation up to date
clk: add kernel docs for struct clk_core
clk: add kernel docs for the core flags
clk: hisilicon: allow COMPILE_TEST builds
...
Merge the pmdomain fixes for v7.2-rc[n] into the next branch, to allow
them to get tested together with the pmdomain changes that are targeted
for the next release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
mtk_mfg_attach_dev() reads prev_o on the first iteration of its loop,
in "if (prev_o && prev_o->freq == o->freq)", before prev_o is assigned
at the end of the loop body. On that first iteration, evaluating prev_o
reads an indeterminate value. If it is non-NULL, the condition
dereferences a stale or invalid pointer, potentially faulting or
incorrectly skipping the first OPP.
Initialize prev_o to NULL. This matches the intent as well: there is no
previous OPP to compare against on the first iteration.
Found with Clang's -Wconditional-uninitialized.
Fixes: f08e7a4e8d ("pmdomain: mediatek: Add support for MFlexGraphics")
Assisted-by: Claude:claude-fable-5
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Add a minimal Module Controller driver for the R-Car X5H (R8A78000) SoC.
For now this just supports the always-on power domains, and dummy module
clocks and resets for the serial console (which is enabled by the boot
loader).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Merge the pmdomain fixes for v7.2-rc[n] into the next branch, to allow
them to get tested together with the pmdomain changes that are targeted
for the next release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
MXC and MMCX were initially omitted as they were believed to have no
consumers, and they were not present downstream either.
The Iris video codec requires these power domains, so add MXC and MMCX
along with the MXC_AO and MMCX_AO.
Fixes: f387ecdd49 ("pmdomain: qcom: rpmhpd: Add Eliza RPMh Power Domains")
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Merge the pmdomain fixes for v7.2-rc[n] into the next branch, to allow
them to get tested together with the pmdomain changes that are targeted
for the next release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Currently, scmi_pd_set_perf_state() treats a performance state of 0 as
invalid and returns -EINVAL. As a result, devices attached to SCMI
performance domains can report failures when relinquishing their
performance vote.
The OPP framework use performance state 0 to indicate that no performance
vote is required. For example, dev_pm_opp_set_rate(dev, 0) is commonly
used (by firmware or linux) when a device is runtime suspended.
A zero performance state does not require any SCMI performance request
to be sent. Treat it as a no-op and return success instead of reporting
an error.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Fixes: 2af23ceb86 ("pmdomain: arm: Add the SCMI performance domain")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmp49yoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1WIH/1SD1rNIb4Prf0C7
Rk9Hz0IZ3uYNe1Xi+Ozv3zQUuLB6d7ewl9e4zyHHYT4eeIKvBZv9jtIF3QH4ty5X
JB9Gy62WICtqIEkzzt2bkcV1byFmKz2+BLv04fgcyTXEGOEByCDiZ3/N3kSJOqvg
YxsGOmKkQSTavFLSe96Gj2pgchJqZ6j3qucDO6GrPOo8depP2kfzxfaJbXix0HEZ
ln08X9hgZDxy4I98PmSaaJsK2R/i6T6jQdA3i8DnSbbyNhLn+3FK6gkP08ZEpaor
82WwJf+MVCLHXLYDy0aYOUDHpkNkkJWOj45A2Hv9JkOupGcUpyPGr82l4yh/MrxC
+kM28xs=
=rIbd
-----END PGP SIGNATURE-----
Merge tag 'v7.2-rc7' into driver-core-next
We need the driver-core fixes in here as well to build on top of.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Merge the pmdomain fixes for v7.2-rc[n] into the next branch, to allow
them to get tested together with the pmdomain changes that are targeted
for the next release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Depending on firmware, part of the MFG domains may be partially left ON
at boot time with kernel detecting PD as ON, while it's OFF.
Some of MFG cores may be left powered after bootloader, to let the ACP to
prefetch the GPU region when the display controller is brought up for a
continuous splash animation performed by downstream stack.
This doesn't play well with an eventual delay in probing upstream Panfrost
driver when the display controller is fully set up, as that would make
genpd's sync_state() to power off the domain while ACP tries to prefetch:
this is causing an AXI stall, effectively freezing the AP indefinitely.
In order to prevent trouble from happening, the sync_state() functionality
must be obliterated on all of the MFG domains: while this guarantees a
power leakage if the bootloader boots the kernel with MFG PDs partially
powered on, this is the only way to ensure stable operation of the SoC
during boot on devices with such firmware because, of course, those will
never officially receive a firmware update.
Fixes Kappa Chromebook hanging during system boot.
Fixes: 0e789b491b ("pmdomain: core: Leave powered-on genpds on until sync_state")
Fixes: 13a4b7fb62 ("pmdomain: core: Leave powered-on genpds on until late_initcall_sync")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Add support for the A9 power controller, whose registers are
in the secure domain and should be accessed via SMC.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Convert CONFIG_IMX_SCU_PD from bool to tristate to allow building as a
loadable module. This is needed on Android devices using the Generic
Kernel Image (GKI), where SoC-specific drivers must be built as modules
rather than built into the core kernel image.
For i.MX8Q devices running Android with a GKI kernel, the SCU power
domain driver must be loadable. Without tristate support, power domains
cannot be properly initialized, preventing these systems from
functioning under GKI.
Use subsys_initcall() so that when built-in the power domain provider
probes before its consumers (e.g. the SCU clock driver at
device_initcall level), fixing "failed to attached the power domain"
warnings at boot. When built as a module, subsys_initcall() is
equivalent to module_init(). No module_exit() is provided because the
SCU power domain provider is a system-level resource that cannot be
safely removed at runtime.
Add MODULE_DEVICE_TABLE() for OF-based module autoloading.
Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Merge the pmdomain fixes for v7.2-rc[n] into the next branch, to allow
them to get tested together with the pmdomain changes that are targeted
for the next release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
scpsys_get_bus_protection_legacy() looks up several legacy bus
protection regmaps from device-tree nodes.
Two error paths put the device node before checking whether the regmap
lookup failed, but still pass that node to dev_err_probe() with %pOF on
failure. If of_node_put() drops the last reference, the later %pOF
formatting can dereference a freed device node.
Keep the node reference until after the error message has been emitted in
the infracfg and SMI lookup paths. Also drop the SMI node before
returning when the SMI phandle is missing.
Fixes: c29345fa5f ("pmdomain: mediatek: Refactor bus protection regmaps retrieval")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Merge the pmdomain fixes for v7.2-rc[n] into the next branch, to allow
them to get tested together with the pmdomain changes that are targeted
for the next release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Without a module description modpost emits a build warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pmdomain/imx/imx8m-blk-ctrl.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/pmdomain/imx/imx8mp-blk-ctrl.o
So add the required string to these two drivers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
For the PCIE_PHY (also called PEXTP_PHY) type of RTFF hardware,
there is special handling setting CLK_DIS before performing the
NRESTORE sequence for resetting the RTFF and start sequencing
from a clean state.
That special handling, though, poses an issue in case the machine
specific bootchain (bootloader in particular) ends up booting the
kernel with both PCIe MAC and PHY enabled (not just power domains)
as doing so will partially corrupt the PCIe MAC/PHY registers in
an unpredictable manner, producing either an initialization fail
in the PCI-Express drivers, or even a hard lockup!
Resolve this by simply removing the special handling: in this case
the bootchain, or remote processors, setting is getting honored by
the later check for PWR_RTFF_SAVE_FLAG presence in the RTFF ctl
register.
Fixes: 9d02c94342 ("pmdomain: mediatek: Add support for RTFF Hardware in MT8196/MT6991")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Add support for the power domains found in the MediaTek MT6858 SoC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nikolai Burov <nikolai.burov@jolla.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
On recent MediaTek SoCs such as MT6858, the kernel is required to use
a secure monitor call (SMC) to enable or disable the modem power domain.
The power domain control register can be read, but firmware prevents it
from being modified directly. Some other parts of the power sequence,
such as setting the ext_buck_iso register, still need to be performed on
the kernel side.
In preparation for modem support, add a flag to enable this new power
sequence for SoCs that need it. Power domains using this flag are not
expected to configure any bus protection registers, since these are
handled internally by the SMC call.
Signed-off-by: Nikolai Burov <nikolai.burov@jolla.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The RK3568 NPU rail (vdd_npu) needs to be enabled before the domain is
powered on and disabled after it is powered off. Give DOMAIN_RK3568 a
regulator parameter (like DOMAIN_RK3588 already has) so the NPU domain
can set need_regulator, letting genpd manage the rail wired up as the
domain's domain-supply instead of marking it always-on in DT.
Suggested-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Signed-off-by: Midgy BALON <midgy971@gmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Convert IMX8M_BLK_CTRL and IMX9_BLK_CTRL from bool to tristate
to allow building as loadable modules.
This change is required to support Android devices using Generic Kernel
Image (GKI) kernels, where SoC-specific drivers must be built as loadable
modules rather than built into the core kernel image.
For i.MX8M and i.MX9 devices running Android with GKI kernels, the
BLK_CTRL drivers therefore need to be loadable. Without tristate
support, power domains cannot be initialized correctly, making these
systems non-functional under GKI.
Add prompt strings to make these options visible and configurable
in menuconfig, keeping them enabled by default on appropriate platforms.
Also remove the IMX_GPCV2_PM_DOMAINS dependency from IMX9_BLK_CTRL.
This dependency was incorrect from the beginning because i.MX93 uses a
different power domain architecture compared to i.MX8M series:
- i.MX8M uses GPCv2 (General Power Controller v2) for power domain
management, hence IMX8M_BLK_CTRL correctly depends on it.
- i.MX93 uses BLK_CTRL directly without GPCv2. The hardware doesn't
have GPCv2 at all.
Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
On multi-socket platforms each socket has its own BPMP that is
registered with the kernel. For such platforms prefix the NUMA ID for
each socket to the BPMP powergate name to ensure there is a unique name
for each power-domain. Note that we only add the NUMA ID for powergates
that return a valid name because an invalid name indicates that the
powergate ID is not supported.
Note the check for the NULL string is moved into the function
tegra_bpmp_powergate_get_name(), because in the multi-socket case we
must only add the prefix if we receive a valid name. A NULL string
indicates that there is no valid powergate associated with the ID that
is being queried.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Commit 18605b1b936b ("pmdomain: bcm: bcm2835-power: Increase ASB control
timeout") raised the ASB handshake polling budget from 1us to 5us.
Surveying the pmdomain subsystem, 5us is still one of the smallest polling
budgets by a wide margin. Comparable handshakes in other drivers use:
- 100us : starfive jh71xx-pmu, apple pmgr-pwrstate
- 1ms : renesas rcar-sysc, rmobile-sysc (power-on)
- 10ms : renesas rcar-gen4-sysc, sunxi sun55i-pck600
- 1s : mediatek mtk-pm-domains, mtk-scpsys
Raise the BCM2835 timeout to 100us, matching analogous drivers. 100us is
still negligible relative to a power-domain transition and gives the V3D
master ASB substantially more headroom to drain under heavy workloads,
assuring us that the timeout is enough for any scenario.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Add support for the power domains provided by the HFRPSYS Power
Controller of the MT8196 SoC.
Those control power to the eDP and DP Transmitter IPs.
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Some new SoCs like MT8196, MT6991, and others, have got one
additional power controller (usually in the HFRP Multimedia
block) which needs a simplified power on/off sequence while
using Direct Control strategy.
Domains using the "simple power sequence" are not backed by
the RTFF hardware, have no Bus Protection mechanism, lacks
the ISO, PWR_ON, PWR_ON_2ND bits, and therefore get enabled
automatically after getting out of reset.
This simple power sequence is then a subset of the full one
as only needs the enablement of the specific power domain's
clock input and reset (where, again, after getting out of
reset, the ISO and PWR_ON bits are automatically internally
getting flipped) to enable or disable (power on or off).
Moreover, the simple power sequence power domains guarantee
that they always get enabled/disabled after executing the
relevant power sequence (on/off) so, differently from the
others, there is also no need to poll for a PWR_ACK.
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
In case any probe error occurs (usually, a probe deferral) the
power domains shall be cleaned up while respecting their child
to parent relationship, or the system may freeze.
In order to do that without any memory footprint impacts after
the fact, allocate a temporary array in the probe function and
use it to store the indices of the added power domains in the
correct order.
This will be used in the error cleanup path and will be freed
at the end regardless of the probe status as, when the probing
succeeds, the genpd API takes care of unregistering all PDs in
the correct order anyway.
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Merge the pmdomain fixes for v7.2-rc[n] into the next branch, to allow
them to get tested together with the pmdomain changes that are targeted
for the next release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Should probe fail for HW_VOTER type power domains, this driver was
unconditionally trying to perform cleanup for DIRECT_CTL domains,
but only after checking if the target domain is powered on... with
the DIRECT_CTL scpsys_domain_is_on() code again.
And there's more: the scpsys_domain_is_on() function is also being
unconditionally used in the probe path, for any power domain that
has flag MTK_SCPD_KEEP_DEFAULT_OFF!
This bug was never experienced by anyone because the HWV domains
never failed probe, and because none of those is declared with the
aforementioned flag - but it's still something critical.
In order to fix this, add a check for MTCMOS Type and, based on
that, call the correct functions for an "is on" check, and also
do the same for the cleanup path, calling the correct functions
for the "power off" action.
For the latter, since there's a call to pm_genpd_remove() right
before calling power_off, be cautious and add a variation of the
power off functions (with a _internal suffix) for those to get a
pointer to scpsys_domain instead of one to generic_pm_domain as,
even if that's still working, this is way too much fragile and
would break at some point.
Fixes: 88914db077 ("pmdomain: mediatek: Add support for Hardware Voter power domains")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Retention is very rarely an operational corner. In the majority of
cases, HW cannot operate properly at Retention levels and so the minimum
operational level when enabling a rail is the first corner above
Retention. A small subset of always-on use cases can operate at
Retention, but those aren't controlled from HLOS.
Currently, we allow Retention by default and only disallow it special
cases. But this leaves us open to various failures when the PD is
enabled without first being voted to an OPP above Retention. Such as
when a child GDSC PD requests to enable its parent RPMh PD. In this
case, the GDSC would get stuck powering on.
Newer chips have started supporting Retention on rails that didn't
previously (such as for MMCX). Instead of adding more special cases to
skip Retention on MMCX, start skipping Retention by default since it's
almost never desired from an HLOS perspective.
Signed-off-by: Mike Tipton <mike.tipton@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
bcm2835_power_probe() initializes all power domains and then registers
the onecell genpd provider, but ignores of_genpd_add_provider_onecell()
failures. Probe can therefore return success even though no provider was
published.
Check the provider registration return value and jump to the existing
cleanup path on failure.
Fixes: 670c672608 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Fix grammar in the help text for the ARM_SCMI_POWER_DOMAIN symbol.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Ahead of reworking the reference counting logic for platform devices,
encapsulate the assignment of the OF node for dynamically allocated
platform devices with the provided helper.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260706-pdev-fwnode-ref-v3-11-1ff028e33779@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge the pmdomain fixes for v7.2-rc[n] into the next branch, to allow
them to get tested together with the pmdomain changes that are targeted
for the next release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
List of power domains in arrays of 'struct rpmhpd' are sorted according
to index name (the define, e.g. RPMHPD_MX), not by actual numerical
value. Fix few sorting mistakes, so comparing the tables between
different devices will be easier. No functional impact - same binary.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Per errata[1]:
ERR050531: VPU_NOC power down handshake may hang during VC8000E/VPUMIX
power up/down cycling.
Description: VC8000E reset de-assertion edge and AXI clock may have a
timing issue.
Workaround: Set bit2 (vc8000e_clk_en) of BLK_CLK_EN_CSR to 0 to gate off
both AXI clock and VC8000E clock sent to VC8000E and AXI clock sent to
VPU_NOC m_v_2 interface during VC8000E power up(VC8000E reset is
de-asserted by HW)
Add a bool variable is_errata_err050531 in
'struct imx8m_blk_ctrl_domain_data' to represent whether the workaround
is needed. If is_errata_err050531 is true, first clear the clk before
powering up gpc, then enable the clk after powering up gpc.
[1] https://www.nxp.com/webapp/Download?colCode=IMX8MP_1P33A
Fixes: a1a5f15f7f ("soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl")
Cc: stable@vger.kernel.org
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Using imx8mm_vpu_power_notifier() for i.MX8MP is wrong, as it ungates
the VPU clocks to provide the ADB clock, which is necessary on i.MX8MM,
but on i.MX8MP there is a separate gate (bit 3) for the NoC. So add
imx8mp_vpu_power_notifier() for i.MX8MP.
Fixes: a1a5f15f7f ("soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The MIPI DSI and CSI domains share control bits for clock and reset, which
can lead to incorrect behavior if one domain disables the shared resource
while the other is still active.
To fix the issue, introduce a shared MIPI PHY power domain to own the
common resources and make DSI and CSI its subdomains. This ensures the
shared bits are properly managed and not disabled while still in use.
Fixes: e9aa77d413 ("soc: imx: add i.MX93 media blk ctrl driver")
Cc: stable@vger.kernel.org
Signed-off-by: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Acked-by: Ulf Hansson <ulfh@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Drop the driver-specific empty determine_rate() function and use the new
shared clk_determine_rate_noop() helper.
Acked-by: Ulf Hansson <ulfh@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
The genpd provider bus is really only used when
CONFIG_PM_GENERIC_DOMAINS_OF is enabled, and since the recent deferred
initialisation of domain parent devices, the root device pointer is
otherwise unused.
Fix the unused variable warning by moving the definition of the root device
pointer inside the corresponding ifdef.
Fixes: 92b69eff80 ("pmdomain: core: fix early domain registration")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606111746.kAxaAbwg-lkp@intel.com/
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
A recent change switching to a dynamically allocated root device broke
platforms like rcar-sysc that registers PM domains before the PM domain
bus itself has been registered (cf. commit c5ae5a0c61 ("pmdomain:
renesas: rcar-sysc: Add genpd OF provider at postcore_initcall")).
Defer the assignment of the parent root device until the domain is
registered with driver core to avoid it being left unset.
Fixes: a96e40f4af ("pmdomain: core: switch to dynamic root device")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/CAMuHMdUHabMGJyJ7e7yp7DLC+JJc9k6NK9p4anj2wRKNuwZUng@mail.gmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Merge the pmdomain fixes for v7.1-rc[n] into the next branch, to allow
them to get tested together with the pmdomain changes that are targeted
for the next release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The kernel-doc parser cannot parse 'struct __packed mtk_mfg_opp_entry {'.
Move __packed to the closing brace, which is the more common kernel style.
Assisted-by: Opencode:Big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Add RPM power domain support for Shikra, reusing SM6125 power
domains with RPM_SMD_LEVEL_TURBO_NO_CPR as the max state.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Rakesh Kota <rakesh.kota@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Add RPMh power domains required for Nord SoC. This includes
new definitions for power domains supplying GFX1 and NSP3 subsystem.
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
for_each_child_of_node_scoped() decrements the reference count of the
nod after each iteration. Assigning it without incrementing the refcount
to a dynamically allocated platform device will result in a double put
in platform_device_release(). Add the missing call to of_node_get().
Cc: stable@vger.kernel.org
Fixes: 3e4d109ee8 ("pmdomain: imx: gpc: Simplify with scoped for each OF child loop")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
