mtk_mfg_attach_dev() reads prev_o on the first iteration of its loop,
in "if (prev_o && prev_o->freq == o->freq)", before prev_o is assigned
at the end of the loop body. On that first iteration, evaluating prev_o
reads an indeterminate value. If it is non-NULL, the condition
dereferences a stale or invalid pointer, potentially faulting or
incorrectly skipping the first OPP.
Initialize prev_o to NULL. This matches the intent as well: there is no
previous OPP to compare against on the first iteration.
Found with Clang's -Wconditional-uninitialized.
Fixes: f08e7a4e8d ("pmdomain: mediatek: Add support for MFlexGraphics")
Assisted-by: Claude:claude-fable-5
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
MXC and MMCX were initially omitted as they were believed to have no
consumers, and they were not present downstream either.
The Iris video codec requires these power domains, so add MXC and MMCX
along with the MXC_AO and MMCX_AO.
Fixes: f387ecdd49 ("pmdomain: qcom: rpmhpd: Add Eliza RPMh Power Domains")
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Currently, scmi_pd_set_perf_state() treats a performance state of 0 as
invalid and returns -EINVAL. As a result, devices attached to SCMI
performance domains can report failures when relinquishing their
performance vote.
The OPP framework use performance state 0 to indicate that no performance
vote is required. For example, dev_pm_opp_set_rate(dev, 0) is commonly
used (by firmware or linux) when a device is runtime suspended.
A zero performance state does not require any SCMI performance request
to be sent. Treat it as a no-op and return success instead of reporting
an error.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Fixes: 2af23ceb86 ("pmdomain: arm: Add the SCMI performance domain")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Depending on firmware, part of the MFG domains may be partially left ON
at boot time with kernel detecting PD as ON, while it's OFF.
Some of MFG cores may be left powered after bootloader, to let the ACP to
prefetch the GPU region when the display controller is brought up for a
continuous splash animation performed by downstream stack.
This doesn't play well with an eventual delay in probing upstream Panfrost
driver when the display controller is fully set up, as that would make
genpd's sync_state() to power off the domain while ACP tries to prefetch:
this is causing an AXI stall, effectively freezing the AP indefinitely.
In order to prevent trouble from happening, the sync_state() functionality
must be obliterated on all of the MFG domains: while this guarantees a
power leakage if the bootloader boots the kernel with MFG PDs partially
powered on, this is the only way to ensure stable operation of the SoC
during boot on devices with such firmware because, of course, those will
never officially receive a firmware update.
Fixes Kappa Chromebook hanging during system boot.
Fixes: 0e789b491b ("pmdomain: core: Leave powered-on genpds on until sync_state")
Fixes: 13a4b7fb62 ("pmdomain: core: Leave powered-on genpds on until late_initcall_sync")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
scpsys_get_bus_protection_legacy() looks up several legacy bus
protection regmaps from device-tree nodes.
Two error paths put the device node before checking whether the regmap
lookup failed, but still pass that node to dev_err_probe() with %pOF on
failure. If of_node_put() drops the last reference, the later %pOF
formatting can dereference a freed device node.
Keep the node reference until after the error message has been emitted in
the infracfg and SMI lookup paths. Also drop the SMI node before
returning when the SMI phandle is missing.
Fixes: c29345fa5f ("pmdomain: mediatek: Refactor bus protection regmaps retrieval")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
For the PCIE_PHY (also called PEXTP_PHY) type of RTFF hardware,
there is special handling setting CLK_DIS before performing the
NRESTORE sequence for resetting the RTFF and start sequencing
from a clean state.
That special handling, though, poses an issue in case the machine
specific bootchain (bootloader in particular) ends up booting the
kernel with both PCIe MAC and PHY enabled (not just power domains)
as doing so will partially corrupt the PCIe MAC/PHY registers in
an unpredictable manner, producing either an initialization fail
in the PCI-Express drivers, or even a hard lockup!
Resolve this by simply removing the special handling: in this case
the bootchain, or remote processors, setting is getting honored by
the later check for PWR_RTFF_SAVE_FLAG presence in the RTFF ctl
register.
Fixes: 9d02c94342 ("pmdomain: mediatek: Add support for RTFF Hardware in MT8196/MT6991")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Should probe fail for HW_VOTER type power domains, this driver was
unconditionally trying to perform cleanup for DIRECT_CTL domains,
but only after checking if the target domain is powered on... with
the DIRECT_CTL scpsys_domain_is_on() code again.
And there's more: the scpsys_domain_is_on() function is also being
unconditionally used in the probe path, for any power domain that
has flag MTK_SCPD_KEEP_DEFAULT_OFF!
This bug was never experienced by anyone because the HWV domains
never failed probe, and because none of those is declared with the
aforementioned flag - but it's still something critical.
In order to fix this, add a check for MTCMOS Type and, based on
that, call the correct functions for an "is on" check, and also
do the same for the cleanup path, calling the correct functions
for the "power off" action.
For the latter, since there's a call to pm_genpd_remove() right
before calling power_off, be cautious and add a variation of the
power off functions (with a _internal suffix) for those to get a
pointer to scpsys_domain instead of one to generic_pm_domain as,
even if that's still working, this is way too much fragile and
would break at some point.
Fixes: 88914db077 ("pmdomain: mediatek: Add support for Hardware Voter power domains")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Per errata[1]:
ERR050531: VPU_NOC power down handshake may hang during VC8000E/VPUMIX
power up/down cycling.
Description: VC8000E reset de-assertion edge and AXI clock may have a
timing issue.
Workaround: Set bit2 (vc8000e_clk_en) of BLK_CLK_EN_CSR to 0 to gate off
both AXI clock and VC8000E clock sent to VC8000E and AXI clock sent to
VPU_NOC m_v_2 interface during VC8000E power up(VC8000E reset is
de-asserted by HW)
Add a bool variable is_errata_err050531 in
'struct imx8m_blk_ctrl_domain_data' to represent whether the workaround
is needed. If is_errata_err050531 is true, first clear the clk before
powering up gpc, then enable the clk after powering up gpc.
[1] https://www.nxp.com/webapp/Download?colCode=IMX8MP_1P33A
Fixes: a1a5f15f7f ("soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl")
Cc: stable@vger.kernel.org
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Using imx8mm_vpu_power_notifier() for i.MX8MP is wrong, as it ungates
the VPU clocks to provide the ADB clock, which is necessary on i.MX8MM,
but on i.MX8MP there is a separate gate (bit 3) for the NoC. So add
imx8mp_vpu_power_notifier() for i.MX8MP.
Fixes: a1a5f15f7f ("soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The MIPI DSI and CSI domains share control bits for clock and reset, which
can lead to incorrect behavior if one domain disables the shared resource
while the other is still active.
To fix the issue, introduce a shared MIPI PHY power domain to own the
common resources and make DSI and CSI its subdomains. This ensures the
shared bits are properly managed and not disabled while still in use.
Fixes: e9aa77d413 ("soc: imx: add i.MX93 media blk ctrl driver")
Cc: stable@vger.kernel.org
Signed-off-by: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
The genpd provider bus is really only used when
CONFIG_PM_GENERIC_DOMAINS_OF is enabled, and since the recent deferred
initialisation of domain parent devices, the root device pointer is
otherwise unused.
Fix the unused variable warning by moving the definition of the root device
pointer inside the corresponding ifdef.
Fixes: 92b69eff80 ("pmdomain: core: fix early domain registration")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606111746.kAxaAbwg-lkp@intel.com/
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
A recent change switching to a dynamically allocated root device broke
platforms like rcar-sysc that registers PM domains before the PM domain
bus itself has been registered (cf. commit c5ae5a0c61 ("pmdomain:
renesas: rcar-sysc: Add genpd OF provider at postcore_initcall")).
Defer the assignment of the parent root device until the domain is
registered with driver core to avoid it being left unset.
Fixes: a96e40f4af ("pmdomain: core: switch to dynamic root device")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/CAMuHMdUHabMGJyJ7e7yp7DLC+JJc9k6NK9p4anj2wRKNuwZUng@mail.gmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Merge the pmdomain fixes for v7.1-rc[n] into the next branch, to allow
them to get tested together with the pmdomain changes that are targeted
for the next release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The kernel-doc parser cannot parse 'struct __packed mtk_mfg_opp_entry {'.
Move __packed to the closing brace, which is the more common kernel style.
Assisted-by: Opencode:Big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Add RPM power domain support for Shikra, reusing SM6125 power
domains with RPM_SMD_LEVEL_TURBO_NO_CPR as the max state.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Rakesh Kota <rakesh.kota@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Add RPMh power domains required for Nord SoC. This includes
new definitions for power domains supplying GFX1 and NSP3 subsystem.
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
for_each_child_of_node_scoped() decrements the reference count of the
nod after each iteration. Assigning it without incrementing the refcount
to a dynamically allocated platform device will result in a double put
in platform_device_release(). Add the missing call to of_node_get().
Cc: stable@vger.kernel.org
Fixes: 3e4d109ee8 ("pmdomain: imx: gpc: Simplify with scoped for each OF child loop")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Set wakeup constraint for any device in a wakeup path. All parent devices
of a wakeup device should not be turned off during suspend. This ensures
the wakeup device is kept on while the system is suspended.
Cc: stable@vger.kernel.org
Fixes: 9d8aa0dd3b ("pmdomain: ti_sci: add wakeup constraint management")
Reported-by: Vitor Soares <vitor.soares@toradex.com>
Closes: https://lore.kernel.org/linux-pm/c0fe43a2339c802e9ce5900092cd530a2ba17a6b.camel@gmail.com/
Signed-off-by: Kendall Willis <k-willis@ti.com>
Reviewed-by: Sebin Francis <sebin.francis@ti.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
While bringing up the PowerVR GPU on the A733 (Radxa Cubie A7Z), we
found that one of the GPU power domains must be configured as "always
on." While the Radxa BSP device tree leaves the GPU power domain nodes
commented out, the GPU driver code contains traces indicating an "always
on" requirement [1].
Currently, sunxi_pck600_desc only supports specifying pd_names. This
patch introduces sunxi_pck600_pd_desc, which stores both the name and
its associated flags. This also (more or less) aligns the implementation
with the existing sun50i PPU handling of always-on domains.
With this change, individual power domains can now be configured more
granularly. In particular, the GPU_CORE domain in sun60i_a733_pck600_pds
can now be explicitly marked with GENPD_FLAG_ALWAYS_ON.
The patch was tested on the Radxa Cubie A7Z, where the GPU now functions
as expected.
Thanks to Icenowy for her support and expertise on sunxi and PowerVR,
and thanks to Mikhail for identifying this exact cause of the GPU
bring-up issue.
[1] https://github.com/radxa/allwinner-bsp/blob/cubie-aiot-v1.4.6/modules/gpu/img-bxm/linux/rogue_km/services/system/rogue/rgx_sunxi/sunxi_platform.c#L62
Signed-off-by: Yuanshen Cao <alex.caoys@gmail.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Driver core expects devices to be dynamically allocated and will, for
example, complain loudly if a device that lacks a release function is
ever freed.
Use root_device_register() to allocate and register the root device
instead of open coding using a static device.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies. Switch to unified
"Qualcomm" so it will be easier for users to identify the options when
for example running menuconfig.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
After primary SCMI pmdomain is created, use new of_genpd helper which
checks for child domain mappings defined in power-domains-child-ids.
Also remove any child domain mappings when SCMI domain is removed.
Signed-off-by: Kevin Hilman (TI) <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Currently, PM domains can only support hierarchy for simple
providers (e.g. ones with #power-domain-cells = 0).
Add support for oncell providers as well by adding a new property
`power-domains-child-ids` to describe the parent/child relationship.
For example, an SCMI PM domain provider has multiple domains, each of
which might be a child of diffeent parent domains. In this example,
the parent domains are MAIN_PD and WKUP_PD:
scmi_pds: protocol@11 {
reg = <0x11>;
#power-domain-cells = <1>;
power-domains = <&MAIN_PD>, <&WKUP_PD>;
power-domains-child-ids = <15>, <19>;
};
With this example using the new property, SCMI PM domain 15 becomes a
child domain of MAIN_PD, and SCMI domain 19 becomes a child domain of
WKUP_PD.
To support this feature, add two new core functions
- of_genpd_add_child_ids()
- of_genpd_remove_child_ids()
which can be called by pmdomain providers to add/remove child domains
if they support the new property power-domains-child-ids.
The add function is "all or nothing". If it cannot add all of the
child domains in the list, it will unwind any additions already made
and report a failure.
Signed-off-by: Kevin Hilman (TI) <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In scpsys_get_bus_protection_legacy(), of_find_node_with_property()
returns a device node with its reference count incremented. The function
then calls of_node_put(node) before checking whether
syscon_regmap_lookup_by_phandle() returns an error. If an error occurs,
dev_err_probe() dereferences the node pointer to print diagnostic
information, but the node memory may have already been freed due to the
earlier of_node_put(), leading to a use-after-free vulnerability.
Fix this by moving the of_node_put() call after the error check, ensuring
the node is still valid when accessed in the error path.
Fixes: c29345fa5f ("pmdomain: mediatek: Refactor bus protection regmaps retrieval")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
If a device is attached to a PM domain through genpd_dev_pm_attach_by_id(),
genpd calls pm_runtime_enable() for the corresponding virtual device that
it registers. While this avoids boilerplate code in drivers, there is no
corresponding call to pm_runtime_disable() in genpd_dev_pm_detach().
This means these virtual devices are typically detached from its genpd,
while runtime PM remains enabled for them, which is not how things are
designed to work. In worst cases it may lead to critical errors, like a
NULL pointer dereference bug in genpd_runtime_suspend(), which was recently
reported. For another case, we may end up keeping an unnecessary vote for a
performance state for the device.
To fix these problems, let's add this missing call to pm_runtime_disable()
in genpd_dev_pm_detach().
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdWapT40hV3c+CSBqFOW05aWcV1a6v_NiJYgoYi0i9_PDQ@mail.gmail.com/
Fixes: 3c095f32a9 ("PM / Domains: Add support for multi PM domains per device to genpd")
Cc: stable@vger.kernel.org
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add the RPMh power domains required for the Hawi SoC. This includes
new definitions for domains supplying specific hardware components:
- DCX: supplies VDD_DISP
- GBX: supplies VDD_GFX_BX
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Allows the buildbots to build the driver on other platforms. There's
nothing special arch specific thing going on here.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the pmdomain fixes for v7.0-rc[n] into the next branch, to allow
them to get tested together with the pmdomain changes that are targeted
for the next release.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Remove kcalloc by using a flexible array member to combine allocations.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The Allwinner A733 PCK600, similar to A523 PCK600, is likely a
customized version of ARM PCK-600 power controller. It shares the same
BSP driver with A523. According to the BSP provided by Radxa, unlike
A523, it doesn't require reset, as well as a different pair of delay
values.
Make reset optional in the sunxi pck600 driver and add support
for A733.
Signed-off-by: Yuanshen Cao <alex.caoys@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org> # matched against BSP driver
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add RPMh Power Domains support for the Eliza platform. The list of power
domains is taken from downstream. Even though the cmd-db does list MMCX
and MXC, they are not used, so they should not be describe.
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
It can be discussed how useful a print is after a successful probe. In the
SCMI power domain case it's seems valuable, as it let us inform about the
number of initialized power domains too, which is fetched from firmware.
Therefore, let's add a print about this, which also aligns with the
behaviour of the SCMI perf domain driver.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@kernel.org>
Change the dev_err() to dev_err_probe() under rockchip_pd_power_on()
to prevent errors early in the boot process when the requested
regulator is not yet available. This converts errors like the following
to debug messages:
rockchip-pm-domain fd8d8000.power-management:power-controller: Failed to enable supply: -517
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Introduce a new power domain (pmd) driver for the MediaTek mt8189 SoC.
This driver ports and refines the power domain framework, dividing
hardware blocks (CPU, GPU, peripherals, etc.) into independent power
domains for precise and energy-efficient power management.
Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In MT8189 mminfra power domain, the bus protect policy separates
into two parts, one is set before subsys clocks enabled, and another
need to enable after subsys clocks enable.
Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To allow user space to monitor the selection of the domain idle state
during s2idle for a CPU PM domain, let's extend the debugfs support in
genpd with this information.
Suggested-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Similar to how cpuidle provides the values for latency and residency for
CPU's idle states through sysfs, let's make the corresponding data for PM
domain's idle states available for user space, via genpd's debugfs support.
Suggested-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To prepare for additional information to be added for the domain idle
states in genpd's debugfs, let's make the existing information denser. To
allow that, let's move the static information of the domain idle states
into a separate debugfs file.
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Drop the unnecessary semicolon after the rpmpd_send_corner()
function's declaration.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In imx_sc_pd_get_console_rsrc(), it does not release the reference.
Fixes: 893cfb9973 ("firmware: imx: scu-pd: do not power off console domain")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In omap_prm_domain_attach_dev, it does not release the reference.
Fixes: 58cbff023b ("soc: ti: omap-prm: Add basic power domain support")
Signed-off-by: Felix Gu <gu_0233@qq.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add the Audio power domain of the MT7622 SoC to the legacy
mtk-scpsys driver (as this legacy SoC is supported only there).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
For devices capable of out-of-band system wakeups via I/O daisy chaining,
prevent sending wakeup constraints to the PM co-processor. This allows
the system to enter deeper low power modes, as the device is not marked
as requiring power.
Replaces the logic from commit b06bc47279 ("pmdomain: ti_sci: handle
wake IRQs for IO daisy chain wakeups") since checking out-of-band wakeup
will cover the same functionality.
Detect out-of-band wakeup in the suspend path, and if it exists, skip
sending the constraint.
Signed-off-by: Kendall Willis <k-willis@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Implement nvmem-provider functionality in mtk-mfg-pmdomain, such that it
can expose its GF_REG_SHADER_PRESENT value in the shared memory as an
nvmem cell for panthor.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Define power domain which needs to be enabled in order for audio to work
on the PXA1908-based samsung,coreprimevelte smartphone. In the
downstream code, this power-on method is marked as specific to the ULCx
series which is allegedly a codename of sorts with ULC1 corresponding to
the PXA1908.
No other audio components needed for sound to work on this phone are
currently available mainline but some successful testing was performed
with the vendor variants of the respective drivers and with the domain
forced always-on.
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Reviewed-by: Duje Mihanović <duje@dujemihanovic.xyz>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This particular block can have DT subnodes describing the LVDS LDB, MIPI
DSI and parallel DPI bridge.
Scan for possible sub-devices within the driver, instead of misusing the
simple-bus to perform the scan.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Convert the driver to devm_ APIs only by making use of
devm_add_action_or_reset() and devm_pm_runtime_enable() to simplify the
probe error path and to drop the .remove() callback. This also ensures
that the device release order equals the device probe error path order.
Furthermore drop the dev_set_drvdata() usage since the only user was the
.remove() callback which is removed by this commit.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
