dibs_lo_attach_dmb(), dibs_lo_detach_dmb() and dibs_lo_unregister_dmb()
look up the dmb_node under dmb_ht_lock, drop the lock and only then
operate on the node's refcount. Nothing keeps the node alive across
that window: __dibs_lo_unregister_dmb() removes the node from the hash
table under the write lock and immediately frees it.
A concurrent final put can therefore free the node between the lookup
and the refcount operation:
CPU0 (attach) CPU1 (owner unregisters)
read_lock_bh(&dmb_ht_lock)
find dmb_node (refcnt == 1)
read_unlock_bh(&dmb_ht_lock)
refcount_dec_and_test() 1 -> 0
write_lock_bh(&dmb_ht_lock)
hash_del(&dmb_node->list)
write_unlock_bh(&dmb_ht_lock)
kfree(dmb_node)
refcount_inc_not_zero(&dmb_node->refcnt) <-- use-after-free
The same window exists for the refcount_dec_and_test() calls in the
detach and unregister paths.
Close the race structurally by making hash table membership and the
refcount transitions atomic with respect to each other:
- Perform the final refcount_dec_and_test() and hash_del() in a single
dmb_ht_lock write-side critical section, in both the unregister and
the detach path. Freeing the node still happens after the lock is
dropped, which is safe because a node whose refcount reached zero has
left the hash table and can no longer be found.
- This establishes the invariant that any node found in the hash table
holds at least one reference, and that the final reference can only
be dropped under the write lock. dibs_lo_attach_dmb() can thus take
its reference with a plain refcount_inc() while still holding the
read lock; refcount_inc_not_zero() is no longer needed.
__dibs_lo_unregister_dmb() no longer touches the hash table and is
renamed to dibs_lo_free_dmb() accordingly.
Note: commit cc21191b58 ("dibs: Move data path to dibs layer") moved
the code to its current location; the race was introduced earlier by
commit c3a910f238 ("net/smc: implement DMB-merged operations of
loopback-ism").
Tested SMC-D via ISM and dibs loopback.
Cc: stable@vger.kernel.org
Fixes: c3a910f238 ("net/smc: implement DMB-merged operations of loopback-ism")
Reported-by: Rahul Chandelkar <rc@rexion.ai>
Signed-off-by: Hidayath Khan <hidayath@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20260727093530.968834-1-hidayath@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A page swapped in by __rb_get_reader_page_from_remote() retains its
stale read offset, causing subsequent reads to skip events or read
past valid data. Fix it.
Link: https://patch.msgid.link/20260729133609.4022734-1-vdonnefort@google.com
Fixes: fbd1743ecb ("ring-buffer: Add non-consuming read for ring-buffer remotes")
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Reviewed-by: Keir Fraser <keirf@google.com>
Tested-by: Keir Fraser <keirf@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
remove_pud_mapping() and remove_p4d_mapping() obtain a child table base
with pud_offset(p4dp, 0) and p4d_offset(pgd, 0), then add the index for
addr.
RISC-V folds page-table levels at runtime. When a level is folded, its
offset helper returns the parent entry itself, but the index can still be
nonzero. Adding it walks past the parent table. Sv48 folds P4D, while Sv39
folds both P4D and PUD, so memory hot-remove can descend into unrelated
memory and pass an invalid page to __free_pages(). This can trigger:
kernel BUG at include/linux/mm.h:1810!
VM_BUG_ON_PAGE(page_ref_count(page) == 0)
arch_remove_memory+0x1e/0x5c
try_remove_memory+0x15e/0x200
remove_memory+0x24/0x3c
Only add the index when the corresponding page-table level is enabled,
matching p4d_offset() and pud_offset().
Fixes: c75a74f4ba ("riscv: mm: Add memory hotplugging support")
Assisted-by: Claude:claude-fable-5
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Link: https://patch.msgid.link/20260729012132.24882-1-kmehltretter@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
After switching to the kernel's default package scripts for our local
kernel RPM builds, we noticed that module BTF entries were missing:
$ ls /sys/kernel/btf/
vmlinux <<<< only vmlinux, no module BTF
Root cause: find-debuginfo.sh (from the debugedit package) prefers
eu-strip over strip when elfutils is installed, which is the common
case on RHEL 9. eu-strip removes non-allocated ELF sections, including
the .BTF section that contains BPF Type Format information for kernel
modules. Without .BTF, BPF tools (bpftool, bcc, bpftrace) cannot resolve
kernel types at runtime, and /sys/kernel/btf/<module> entries are not
created when modules are loaded.
Additionally, since commit 8646db2389 ("libbpf,bpf: Share BTF
relocate-related code with kernel"), modules contain a .BTF.base section
that maps distilled type IDs to vmlinux types. If .BTF.base is stripped,
btf_parse_module() falls back to vmlinux BTF directly, causing type ID
mismatches and rejecting the module's BTF entirely.
Fix by passing --keep-section .BTF and --keep-section .BTF.base via
_find_debuginfo_opts, which adds -K .BTF and -K .BTF.base to the
eu-strip/strip command, preserving both sections while allowing normal
debuginfo extraction to proceed.
After this change, all module BTF files are properly generated:
$ ls /sys/kernel/btf/
aesni_intel drm i2c_i801 mfd_core
ahci drm_client_lib i2c_mux net_failover
backlight drm_kms_helper i2c_smbus pcspkr
ccp drm_shmem_helper input_leds qemu_fw_cfg
dm_log failover intel_rapl_common sch_fq_codel
dm_mirror fat intel_rapl_msr serio_raw
dm_mod fuse irqbypass sunrpc
dm_region_hash gf128mul iTCO_wdt vfat
virtio_balloon virtio_console virtio_dma_buf virtio_gpu
virtio_net virtio_rng virtio_blk vmlinux
xfs
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Alan Maguire <alan.maguire@oracle.com>
Link: https://patch.msgid.link/20260728024950.44946-1-laoar.shao@gmail.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
PCIe controller 2 has interrupts 0-4 mapping to GIC SPI 138-142. The
mapping for interrupt 1 was incorrectly set to 138 due to a copy-paste
error. Fix it to 139.
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://lore.kernel.org/r/20260725215722.9323-1-rosenp@gmail.com
Fixes: 3b3e35b279 ("ARM: dts: BCM5301X: Relicense AXI interrupts code to the GPL 2.0+ / MIT")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
[Why]
We need to exit PSR/IPS before programming. Before calling DC for
programming in amdgpu_dm_commit_planes(), there's a
vblank_control_workqueue flush. This waits for IPS and PSR exit. (See
drm_vblank_on/off() > amdgpu_dm_crtc_set_vblank() --queue_work()->
amdgpu_dm_crtc_vblank_control_worker())
Prior to the tagged "Fixes:" change, drm_vblank_get() was called before
the workqueue flush. This ordering ensures that PSR exit occurred before
programming. After the "Fixes:" change, drm_vblank_get() is called after
the workqueue flush, leading to programming while idle optimizations are
still active. This can lead to incorrect flip_pending detection used by
vblank event delivery.
[How]
Split the vblank_get() component of `dm_arm_vblank_event()` into
`dm_arm_vblank_event_pre_programming()`, which is called before
programming. Call it before the vblank_control_workqueue flush.
Includes a drive-by cleanup of prepare_flip_isr(): the only caller is
dm_arm_vblank_event() and it's simple enough to roll-in.
v2: Fix checkpatch formatting warning on
drm_arm_vblank_event_pre_programming() arg alignment.
Fixes: 48ab86360a ("drm/amd/display: check GRPH_FLIP status before sending event")
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/4141#note_3583205
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5527
Assisted-by: Codex:gpt-5.6-sol
Assisted-by: Claude:opus-5
Suggested-by: David Weber <weber.aulendorf@gmail.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 05984e2952)
APUs use firmware-owned DPM tables and do not support replacement through
pp_table. Generic callbacks can nevertheless expose the sysfs file and
accept an upload before resetting the power management stack.
Treat pp_table as unsupported on APUs. Use the same platform check in the
get and set paths to hide the file and reject uploads.
Fixes: 289921b03f ("drm/amd/powerplay: implement sysfs of pp_table for smu11 (v2)")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 74f28db2db)
Cc: stable@vger.kernel.org
- Fix a tiny buglet when propagating the deactivation of an interrupt
from a nested guest, which happened to trigger a gold plated CPU bug
on a particular implementation
- Fix a race between LPI unmapping and mapping, resulting in leaked
LPIs
- Make LPI mapping more robust on memory allocation failure
- Fix the handling of the EL2 tracing clock being disabled
- A couple of Sashiko-driven fixes for corner cases in the EL2 tracing
code
- Add missing sysreg tracepoint for the EL2 code
- Tidy-up the mutual exclusion of guest-memfd and MTE
- Update Fuad's email address to point to @linux.dev
s390:
- several fixes for PCI passthru in s390 kvm
- fix a 7.2-rc regression in the adapter interrupt mapping code
x86:
- Add memory clobber to asm for VMX instructions; without one, the compiler
could reorder them in troublesome ways because "asm volatile" and "asm goto"
only protect against removal of the asm.
- Cancel delayed I/O APIC EOI handling before destroying vCPUs
- Check all address spaces (normal and SMM) for write tracking and large
pages, not just the current one.
- Always update x2APIC MSR intercepts for L1 when AVIC is deactivated,
even if not running L1. If the deactivation is VM-wide rather than being
caused by something in L2's vCPU state, after a nested vmexit L1 will
be able to access the host's APIC state.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmpqc1YUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNmwwgAqmInlLpGii9THsWg6+KAfXynx7Ry
ZWgseEX5THgDKJOsaNU+wbZQTkMnTt2hKZ7zw3o28+S5Q4mza3J/8j9k1zRI2Ah9
eZhTpqrl4Z2bTMgYFfzlwpjvVT5jbc7BrO6l0Egf4jDcyatz5aNQ4QK7rITVNHdT
rCMOX0tLUI14JjVWn0v9NVg55RK90vK+5l455RJFxAFM5yVmmY2OBWoPDgK8Y/MA
b0UuEwI81kBTwRpMtZ2Lu4pe5d+FPdMrRrqNRRKVtv+fxPmSHi9oXbM+gomto4XJ
/cDxrVBY3Svl/dObLO5UESl6AoRHgH6/Gz5iIaBHsGDuloU5x/pG9cx8HQ==
=C9UQ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"arm64:
- Fix a tiny buglet when propagating the deactivation of an interrupt
from a nested guest, which happened to trigger a gold plated CPU
bug on a particular implementation
- Fix a race between LPI unmapping and mapping, resulting in leaked
LPIs
- Make LPI mapping more robust on memory allocation failure
- Fix the handling of the EL2 tracing clock being disabled
- A couple of Sashiko-driven fixes for corner cases in the EL2
tracing code
- Add missing sysreg tracepoint for the EL2 code
- Tidy-up the mutual exclusion of guest-memfd and MTE
- Update Fuad's email address to point to @linux.dev
s390:
- several fixes for PCI passthru in s390 kvm
- fix a 7.2-rc regression in the adapter interrupt mapping code
x86:
- Add memory clobber to asm for VMX instructions; without one, the
compiler could reorder them in troublesome ways because "asm
volatile" and "asm goto" only protect against removal of the asm.
- Cancel delayed I/O APIC EOI handling before destroying vCPUs
- Check all address spaces (normal and SMM) for write tracking and large
pages, not just the current one.
- Always update x2APIC MSR intercepts for L1 when AVIC is deactivated,
even if not running L1. If the deactivation is VM-wide rather than being
caused by something in L2's vCPU state, after a nested vmexit L1 will
be able to access the host's APIC state"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: SVM: Update x2APIC MSR intercepts if AVIC is inhibited while L2 is active
KVM: x86/mmu: Check all address spaces before skipping unsync
KVM: x86/mmu: Check write tracking in all address spaces
KVM: x86: Cancel delayed I/O APIC EOI handling before destroying vCPUs
KVM: VMX: add memory clobber to asm for VMX instructions
KVM: s390: Fall back to short-term pinning in MAP ioctl
KVM: s390: pci: Validate AIBV and AISB before pinning guest pages
KVM: s390: pci: Fix resource leak on IRQ registration failure
KVM: s390: pci: Fix NULL dereference on AIBV allocation failure
KVM: s390: pci: Fix missing error codes and memory unaccounting
KVM: s390: pci: Fix memory accounting for pinned/unpinned pages
KVM: s390: pci: Reject adapter interrupt forwarding if already enabled
KVM: arm64: Reject guest_memfd memslots when the VM has MTE
KVM: arm64: Add missing hyp_enter when trapping sysreg
KVM: arm64: Fix hyp_trace_desc allocation size in hyp_trace_load()
KVM: arm64: Fix potential leak in hyp_trace_buffer_alloc_bpages_backing
KVM: arm64: Fix hyp_trace clock disabling
KVM: arm64: vgic: Mitigate potential LPI registration failure
KVM: arm64: vgic: Fix race between LPI release and re-registration
KVM: arm64: Update Fuad Tabba's email address
...
Always update x2APIC MSR intercepts for L1 when AVIC is deactivated, even
if L2 is active and KVM is using a separate MSR bitmap to run L2. If AVIC
is fully enabled prior to running L2, and is then inhibited while L2 is
active (for a VM-scoped inhibit), then KVM will run L1 with AVIC disabled,
but with x2APIC MSR intercepts disabled, i.e. will allow L1 to read most of
the host's APIC state, send arbitrary interrupts, change task priority, and
ultimately trivially DoS the host.
E.g. sending a self-IPI in L1 on HYPERV_REENLIGHTENMENT_VECTOR, 0xee, with
CONFIG_HYPERV=n in the host kernel as a "safe" PoC, yields:
Spurious interrupt (vector 0xee) on CPU#425. Acked
And hacking KVM to abuse kvm_set_posted_intr_wakeup_handler() to register a
handler and WARN on POSTED_INTR_WAKEUP_VECTOR yields:
------------[ cut here ]------------
WARNING: arch/x86/kvm/svm/svm.c:5594 at pi_wakeup_handler+0x9/0x10 [kvm_amd], CPU#156: nested_x2apic_t/316940
CPU: 156 UID: 0 PID: 316940 Comm: nested_x2apic_t Tainted: G S U
Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
Hardware name: Google Astoria-Turin/astoria, BIOS 0.20260209.0-0 02/09/2026
RIP: 0010:pi_wakeup_handler+0x9/0x10 [kvm_amd]
Call Trace:
<IRQ>
sysvec_kvm_posted_intr_wakeup_ipi+0x64/0x80
</IRQ>
<TASK>
asm_sysvec_kvm_posted_intr_wakeup_ipi+0x1a/0x20
RIP: 0010:vcpu_run+0x1430/0x1e40 [kvm]
kvm_arch_vcpu_ioctl_run+0x2c1/0x600 [kvm]
kvm_vcpu_ioctl+0x580/0x6b0 [kvm]
__se_sys_ioctl+0x6d/0xb0
do_syscall_64+0x10a/0x480
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x46ff4b
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: 091abbf578 ("KVM: x86: nSVM: optimize svm_set_x2apic_msr_interception")
Cc: stable@vger.kernel.org
Cc: Yosry Ahmed <yosry@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://patch.msgid.link/20260729213558.639074-1-pbonzini@redhat.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The DSI PHY CXO clock input is the SoC CXO divided by two. DSI0 already
uses correct one, but DSI1 got copy-paste from SM8750, which had same
problem and copy-pasted code from SM8650. Wrong clock parent will cause
incorrect DSI1 PHY PLL frequencies to be used making the DSI panel
non-working, although there is no upstream user of DSI1.
Fixes: 159d252ed8 ("arm64: dts: qcom: eliza: Add display (MDSS) with Display CC")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260713125837.727632-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In encode_message() the per-transaction lower-bound check compares
trans_hdr->len against sizeof(trans_hdr), i.e. the size of the pointer,
instead of sizeof(*trans_hdr), the size of struct qaic_manage_trans_hdr.
Every other length check in this file (encode_message() at the loop
guard, decode_message(), etc.) correctly uses sizeof(*trans_hdr), so
this is an inconsistency. On 64-bit builds the pointer and the struct
are both 8 bytes, so the check is correct by coincidence and there is
no behavioural change. On 32-bit builds the pointer is 4 bytes, which
weakens the minimum-length check below the 8-byte header size.
Use sizeof(*trans_hdr) so the check validates against the actual
transaction header size on all builds.
Fixes: ea33cb6fc2 ("accel/qaic: tighten bounds checking in encode_message()")
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260617212520.59801-1-meatuni001@gmail.com
`audit_del_rule()` destroys `e->rule.exe` via `audit_remove_mark_rule()`
before unlinking the rule from RCU-visible filter lists and waiting for a
grace period. Concurrent readers in `audit_filter()` and
`audit_filter_rules()` still dereference `e->rule.exe`, while the fsnotify
mark can be freed on an independent lifetime path. This creates a
use-after-free window during rule deletion.
Fix this by unlinking the rule from the RCU-visible lists and invoking
`synchronize_rcu()` before calling `audit_remove_mark_rule()` (and other
rule removal helpers). This ensures that all existing RCU readers have
exited the critical section before any underlying resources are destroyed.
Cc: stable@vger.kernel.org
Fixes: 34d99af52a ("audit: implement audit by executable")
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: Codex:gpt-5.4
Signed-off-by: Luxiao Xu <rakukuip@gmail.com>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
audit_log_n_string() computes new_len as "slen + 3" (enclosing quotes
plus the NUL terminator) and stores it into an int, while slen is a
size_t. For a sufficiently large slen the addition can overflow and/or
the result be truncated when assigned to the int new_len, so the
"new_len > avail" check can be bypassed and the subsequent
memcpy(ptr, string, slen) can write past the skb tail.
This is the same class of bug that was fixed for the hex sibling in
commit 65dfde57d1 ("audit: fix potential integer overflow in
audit_log_n_hex()"); both helpers are reached through
audit_log_n_untrustedstring() with the same length source.
Make new_len a size_t and use check_add_overflow() to catch the
overflow, mirroring the audit_log_n_hex() fix. No functional change for
the in-tree callers, which all pass bounded lengths.
Cc: stable@vger.kernel.org
Fixes: 168b717395 ("AUDIT: Clean up logging of untrusted strings")
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Family 0x1a, model 0xd0..0xd7 belongs to the Zen5 generation. Carve it
out from the larger, Zen6 range where former doesn't belong.
[ bp: Rewrite commit message, add tags. ]
Fixes: b5f53e6d3d ("x86/CPU/AMD: Add more Zen6 models")
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://patch.msgid.link/20260729055459.15904-1-Pratik.Vishwakarma@amd.com
regex_match_full() calls strncmp(str, r->pattern, len) where len is the
target field buffer size. When len is smaller than r->len (the filter
pattern length), strncmp() checks only len bytes of r->pattern against
str. If those len bytes match, strncmp() returns 0, resulting in a
false-positive match where a shorter string in a fixed-size field
matches a longer filter pattern.
For example, a 4-byte static string field containing "abcd" matched the
filter pattern "abcdefgh" because strncmp("abcd", "abcdefgh", 4)
returned 0. In this case, @len does NOT include '\0' because it is
fixed-size array.
Fix this by returning 0 (no match) early when len < r->len.
Fixes: 1889d20922 ("tracing/filters: Provide basic regex support")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/178528488779.124250.5571741156199253769.stgit@devnote2
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
trace_module_add_events() ignores the return value of __register_event()
and unconditionally calls __add_event_to_tracers() for each event.
If __register_event() fails (for example, if event_init() fails), the
trace_event_call is not added to ftrace_events list, but
__add_event_to_tracers() still creates a trace_event_file pointing to it.
If module loading subsequently fails and module memory is freed, tracing
state retains a stale trace_event_call pointer in trace_event_file,
leading to a use-after-free when tracefs or tracing subsystem operations
are later executed.
Fix this by checking the return value of __register_event() and only
calling __add_event_to_tracers() if event registration succeeded.
Fixes: ae63b31e4d ("tracing: Separate out trace events from global variables")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/178528487878.124250.14170824576025743236.stgit@devnote2
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
mmio_trace_rw() and mmio_trace_mapping() retrieve mmio_trace_array into
tr and pass it to __trace_mmiotrace_rw() and __trace_mmiotrace_map().
If these functions are invoked while mmio_trace_array is NULL (e.g. before
initialization or after disabled), accessing tr->array_buffer.buffer will
result in a NULL pointer dereference crash.
Fix this by adding an explicit NULL check for tr at the beginning of
__trace_mmiotrace_rw() and __trace_mmiotrace_map().
Link: https://patch.msgid.link/178524300062.56416.8362487250709962380.stgit@devnote2
Fixes: f984b51e07 ("ftrace: add mmiotrace plugin")
Assisted-by: Antigravity:gemini-3.6-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
mmio_reset_data() is called during tracer initialization, reset, and
start. While it resets overrun_detected and prev_overruns, it neglects
to reset dropped_count. Consequently, dropped event counts from prior
tracing sessions persist in dropped_count and corrupt overrun reports
in subsequent runs.
Fix this by explicitly calling atomic_set(&dropped_count, 0) in
mmio_reset_data().
Link: https://patch.msgid.link/178524299122.56416.16277704230639425172.stgit@devnote2
Fixes: 173ed24ee2 ("mmiotrace: count events lost due to not recording")
Assisted-by: Antigravity:gemini-3.6-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On RISC-V platforms where the entire physical memory (DRAM) resides
above the 32-bit address space (i.e., above dma32_phys_limit), the
current SWIOTLB initialization logic fails.
This patch addresses two interconnected issues on such platforms:
1. Incorrect 32-bit DMA bounce assumption:
The existing condition `max_pfn > PFN_DOWN(dma32_phys_limit)` assumes
that a 32-bit DMA bounce buffer is required simply because the maximum
PFN exceeds the 32-bit limit. However, if all DRAM starts above 4GB,
no memory exists below the limit to satisfy this allocation. Fix
this by adding a check to ensure `memblock_start_of_DRAM()` is actually
below the 32-bit limit before enforcing 32-bit SWIOTLB.
2. kmalloc() bounce buffer allocation failure on non-coherent systems:
For non-coherent DMA, kmalloc() buffers whose sizes are not
cache-line-aligned still require bouncing, even if 32-bit DMA bouncing
is skipped. Without the `SWIOTLB_ANY` flag, swiotlb_init() defaults to
allocating from low memory, which fails completely when DRAM only exists
in high memory. By appending `SWIOTLB_ANY` to swiotlb_flags, the allocator
is permitted to allocate this bounce buffer from high memory.
With this patch, systems with non-coherent DMA and DRAM entirely above
4GB can successfully map the software IO TLB in high memory and boot
normally.
Tested-by: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.dev>
Link: https://patch.msgid.link/20260727-fix-riscv-swiotlb-v3-1-59479b23736c@linux.dev
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The alternative patching of sifive vendor extensions also calls the
sifive_errata_patch_func(), but the patch_id of the vendor extension
(ext + RISCV_VENDOR_EXT_ALTERNATIVES_BASE) is always larger than
ERRATA_SIFIVE_NUMBER. Remove this unnecessary warning.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Link: https://patch.msgid.link/20260503-sifive_errata-v1-1-6f12a81bc267@sifive.com
[pjw@kernel.org: drop unnecessary braces]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
When a fan tach channel is present, npcm7xx_pwm_fan_probe() starts
fan_timer. The timer callback polls tach state and rearms the timer, but
the driver has no remove callback or devm cleanup action to stop it. On
device detach, the devm-managed driver data and I/O mappings can be
released while the timer is still pending or running.
Register a devm cleanup action before starting the timer and shut the
timer down synchronously from that action.
This issue was found by a static analysis tool.
Fixes: f1fd4a4db7 ("hwmon: Add NPCM7xx PWM and Fan driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hongyan Xu <getshell@seu.edu.cn>
Link: https://lore.kernel.org/r/20260729100116.790-1-getshell@seu.edu.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
iface_fw_to_cpu_addr() only checks that the firmware-provided MCU virtual
address points inside the shared section. The returned pointer is later
used as a full firmware interface structure, so accepting an address near
the end of the shared section can still lead to out-of-bounds accesses.
Pass the expected object size to iface_fw_to_cpu_addr() and reject ranges
that do not fit entirely in the shared section.
Fixes: 2718d91816 ("drm/panthor: Add the FW logical block")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20260720114918.15973-1-osama.abdelkader@gmail.com
ovpn_fill_info emits IFLA_OVPN_MODE inside IFLA_INFO_DATA, but
ovpn_link_ops does not provide a get_size callback. Consequently,
rtnetlink's size estimate for ovpn link messages does not include the
nested mode attribute.
Available skb tailroom may hide this mismatch. When the remaining space
is insufficient, however, ovpn_fill_info returns -EMSGSIZE and message
construction fails.
Add the callback and account for IFLA_OVPN_MODE.
Fixes: c2d950c467 ("ovpn: add basic interface creation/destruction/management routines")
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
In register_fprobe(), get_ips_from_filter() resolves target function
addresses and increments module reference counts via try_module_get() for
symbols in kernel modules. If get_ips_from_filter() fails on the second
pass and returns an error, register_fprobe() returned directly without
releasing module references acquired up to that point.
Fix this by ensuring the cleanup loop executing module_put() runs even when
get_ips_from_filter() returns a negative error.
Link: https://lore.kernel.org/all/178528125360.101985.4144133640239273153.stgit@devnote2/
Fixes: d24fa977ee ("tracing: fprobe: Fix to lock module while registering fprobe")
Assisted-by: Antigravity:gemini-3.6-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
On a non-range clear, curs.size is never set, so the segment test
(next - va_curs_start > curs->size) returns false for every level > 0
before the clear_pt short-circuit is reached. The clear then descends to
level 0 instead of forming a huge zero-leaf, wasting page tables and
risking -ENOMEM on unbind.
Move the null-VMA, purged-BO and clear_pt short-circuits above the
curs->size test. The bind path always sets curs.size, so it is unaffected.
v2
- Also set curs.size on the clear path so the cursor stays meaningful
during the walk. clear_pt is only reached with range == NULL, so assert
that invariant. (Matthew Brost)
Cc: Matthew Brost <matthew.brost@intel.com>
Fixes: 5b658b7e89 ("drm/xe: Clear scratch page on vm_bind")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260728055916.593707-2-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
(cherry picked from commit 04eeeb45cb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The RT5640 GPIO1/IRQ pin can be configured either as GPIO1 or as the
codec interrupt output.
Some boards, such as the Firefly-RK3399, do not connect the codec
interrupt output. This causes the following binding validation warning:
'interrupts' is a required property
Make the interrupts property optional to support such hardware
configurations.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20260727185814.2599488-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Trace point pvr_job_submit_fw() is used to trace job submission to
the FW. Currently it is recorded when a command is written to the Client
circular buffer.
Move trace recording after writing command to the Kernel circular buffer to
better represent command submission to the FW.
Fixes: c1079aebb4 ("drm/imagination: Add support for trace points")
Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260724-b4-tracepoint-fix-v3-1-8f8e5e8179d3@imgtec.com
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
intel_dp_hdmi_sink_max_frl() limits the sink's max FRL rate by its
DSC max FRL rate whenever the sink supports DSC 1.2.
However, the DSC max FRL rate (HF-VSDB DSC_Max_FRL_Rate) only applies
to compressed video transport, which requires a DSC 1.2 encoder in
the PCON (configured via intel_dp_pcon_dsc_configure()).
Without such an encoder the HDMI link always carries uncompressed
video, for which the regular Max_FRL_Rate is the correct limit.
Applying the DSC limit unconditionally trains the FRL link at a lower
rate than both the PCON and the sink support.
E.g. an LG OLED G4 (Max_FRL_Rate 48 Gbps, DSC_Max_FRL_Rate 24 Gbps)
behind a Synaptics VMM7100 PCON (PCON max FRL bw 48 Gbps, no DSC
encoder):
Sink max rate from EDID = 24 Gbps
FRL trained with : 24 Gbps
while Windows/macOS train the same hardware at 40/48 Gbps.
The too low FRL rate needlessly constrains the formats available to
the sink.
Only apply the sink's DSC max FRL rate if the PCON has a DSC 1.2
encoder, matching the gate in intel_dp_pcon_dsc_configure().
PCONs with a DSC encoder keep the current conservative behavior,
since the link is trained once and compressed transport may be used
for any subsequent mode.
With this the setup above trains at 48 Gbps.
Tested on PTL (xe) with the above PCON/sink combo.
Fixes: 10fec80b48 ("drm/i915/display: Configure PCON for DSC1.1 to DSC1.2 encoding")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Alexander Kaplan <alexander.kaplan@sms-medipool.de>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260718105207.5565-3-alexander.kaplan@sms-medipool.de
(cherry picked from commit 71b57dd92f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The OVL adaptor registers both an aggregate driver for its child devices
and a component for the main DRM aggregate. Probe currently ignores an
error from registering the child aggregate and leaves that aggregate
registered if registering the DRM component fails. The remove callback
also leaves the DRM component registered.
These imbalances can leave component framework entries referring to a
device whose probe failed or whose driver has been detached. The aggregate
unbind callback also fails to undo component_bind_all(), leaving its child
components marked as bound when the aggregate is removed.
Check the aggregate registration result, unwind it when the component
registration fails, and unregister the component before the aggregate on
remove. Keep runtime PM enabled until both framework registrations have
been removed, and unbind all child components from the aggregate unbind
callback.
Fixes: 453c336463 ("drm/mediatek: Add ovl_adaptor support for MT8195")
Cc: stable@vger.kernel.org # 6.4+
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20260721152242.47138-1-mhun512@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Commit 76255024ca ("drm/mediatek: mtk_dsi: enable hs clock
during pre-enable") rightfully moves the HS clock enablement to
before atomic_enable(), but it's moving it to mtk_dsi_poweron(),
which is not only called in the .atomic_pre_enable() callback
for the DRM bridge, but also in the MediaTek DRM's .ddp_start()
callback, which happens way before the bridge ones.
The HS clock enablement should be done at just the right time,
otherwise some bridge chips (or some Display Driver ICs) may
not work correctly: this is seen at least with a Parade DSI to
eDP bridge (PS8640) on the MT8173 Elm Chromebook.
This resolves a regression that was seen on the aforementioned
machine, which was happening only after a suspend-resume cycle.
Cc: <stable@vger.kernel.org> # 7.1.x
Fixes: 76255024ca ("drm/mediatek: mtk_dsi: enable hs clock during pre-enable")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Adam Thiede <me@adamthiede.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20260728153145.578404-1-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
I haven't been active enough lately to warrant an M: maintainer entry,
demote me to reviewer.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/87y0hspx0u.fsf@mpe.ellerman.id.au
The PCON max FRL bandwidth field lives in byte 2 of the DFP Detailed
Capability Info (DPCD 0x82 for the first DFP).
The DP standard defines the meaning of descriptor bytes 1-3 strictly
per DFP type, and for a DisplayPort type DFP all of them are
reserved, with "read all 0s" semantics (DP v2.0, section 2.12.3,
Table 2-183).
The FRL bandwidth field is an HDMI DFP extension added by the VESA
DP-to-HDMI PCON specification.
drm_dp_get_pcon_max_frl_bw() however parses the byte without checking
the DFP type, the branch presence or DETAILED_CAP_INFO_AVAILABLE.
Without the latter the port descriptors are one byte wide and
port_cap[2] is not even the right register.
All neighbouring helpers parsing the same descriptor are scoped by
the DFP type already, see for instance drm_dp_downstream_max_bpc()
reading the same byte and returning 0 for a DP type DFP.
amdgpu's DC parses the field only for HDMI(/DP++) detailed types as
well.
This is not theoretical.
A Synaptics VMM7100 based USB-C to HDMI adapter with a macOS targeted
firmware advertises a DisplayPort type DFP with the type byte
replicated across the whole descriptor (08 08 08 08).
i915 decodes that as "PCON limited to 18 Gbps FRL" and prunes every
mode above ~750 MHz dotclock, including all the 4k@100/120 modes the
sink EDID offers, while macOS drives 4k@120 through the same adapter
just fine via DP DSC (and amdgpu's type-scoped parser would ignore
the bogus field as well).
Only parse the field for an HDMI DFP behind a DPCD 1.1+ branch
device that reports detailed cap info, matching the type-scoped
field layout of the spec and the rest of the helpers.
Fixes: ce32a6239d ("drm/dp_helper: Add Helpers for FRL Link Training support for DP-HDMI2.1 PCON")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com> (v2)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Alexander Kaplan <alexander.kaplan@sms-medipool.de>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260610193825.2933-1-alexander.kaplan@sms-medipool.de
disk_release() undoes blk_mq_init_allocated_queue() for a disk whose
probe failed before add_disk(), but it only calls blk_mq_exit_queue().
Nothing there stops q->timeout, and that timer rolls forward: it stays
pending until it next expires, not until the last request completes.
So if the driver issued any I/O before adding the disk, the
request_queue is freed while still linked into a timer wheel bucket.
Commit 6f8191fdf4 ("block: simplify disk shutdown") dropped the
blk_cleanup_queue() call that used to stop it. __del_gendisk() and
blk_mq_destroy_queue() still do; only the probe failure path lost it.
nvme gets there because nvme_update_ns_info() submits Report Zones or
FDP io-mgmt-recv on ns->queue before the disk is added, so a later
failure - a concurrent reset setting NVME_CTRL_FROZEN, or
device_add_disk() failing - lands in put_disk() with the timer armed:
BUG: KASAN: slab-use-after-free in detach_if_pending+0x30c/0x340
Write of size 8 at addr ffff888004d71310 by task kworker/u8:2/37
__timer_delete_sync+0x156/0x240 kernel/time/timer.c:1621
blk_sync_queue+0x22/0x40 block/blk-core.c:222
nvme_sync_queues+0x100/0x150 drivers/nvme/host/core.c:5362
nvme_reset_work+0x138/0x930 drivers/nvme/host/pci.c:3264
Allocated by task 34:
__blk_mq_alloc_disk+0x33/0x100 block/blk-mq.c:4462
nvme_alloc_ns+0x290/0x3870 drivers/nvme/host/core.c:4146
Freed by task 0:
blk_free_queue_rcu+0x3a/0x50 block/blk-core.c:254
rcu_core+0xc10/0x1730 kernel/rcu/tree.c:2857
The queue being synced there is ctrl->admin_q, only a victim sharing a
timer wheel bucket with the freed queue's dangling entry; other runs
tripped in enqueue_timer(), __run_timers() or blk_mq_timeout_work().
Failing nvme_alloc_ns() with a debug patch makes it deterministic: one
leaked timer trips KASAN within seconds, while 1987 patched releases
produced no splat.
Stop the timer and the queue work items before blk_mq_exit_queue(), like
blk_mq_destroy_queue() does.
Found by FuzzNvme.
Fixes: 6f8191fdf4 ("block: simplify disk shutdown")
Acked-by: Weidong Zhu <weizhu@fiu.edu>
Signed-off-by: Chao Shi <coshi036@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260727201257.211635-1-coshi036@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ems_usb_read_bulk_callback() walks CPC messages packed in one USB
receive buffer.
Check that each declared message fits in the URB payload. Also require the
type-specific payload to cover the fields used by the CAN, state, error and
overrun handlers.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260706092752.79600-1-pengpeng@iscas.ac.cn
Fixes: 702171adee ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
es58x_read_bulk_callback() resubmits the RX URB after processing a received
packet. If the resubmit succeeds, the URB remains anchored and will be
handled by the normal RX path or by teardown.
However, if usb_submit_urb() fails, the callback unanchors the URB and then
returns directly. This skips the existing free_urb path, so the coherent
transfer buffer allocated with usb_alloc_coherent() is not released.
Reuse the existing free_urb path after a resubmit failure so that the RX
coherent buffer is freed before leaving the callback.
Fixes: 5eaad4f768 ("can: usb: etas_es58x: correctly anchor the urb in the read bulk callback")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20260706014601.415445-1-lgs201920130244@gmail.com
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
If the allocation of the SKB in gs_usb_receive_bulk_callback() fails, the
driver returns from the callback without resubmitting the URB in order to
receive further USB in URBs.
This results in a silent performance degradation which, if it occurs
repeatedly, results in starvation of USB in traffic.
Instead of returning immediately, try to resend the URB. If this also
fails, this is logged as an info message.
Fixes: d08e973a77 ("can: gs_usb: Added support for the GS_USB CAN devices")
Fixes: 26949ac935 ("can: gs_usb: add CAN-FD support")
Link: https://patch.msgid.link/20260709-gs_usb-resubmit-urb-v1-1-4dd40030cc84@pengutronix.de
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
c_can_chip_config() was programming C_CAN_CTRL_REG without CONTROL_INIT,
which may allow the controller to become active before
c_can_set_bittiming() finishes.
That creates a short timing window where the peripheral can interact with
the bus using a different/default bitrate, potentially generating bus
errors and corrupting traffic.
Set CONTROL_INIT together with the control-mode writes in
c_can_chip_config() (normal, loopback and listen-only paths), so the
controller stays halted until bit timing is fully programmed.
This prevents transient bus disturbance during startup when the configured
bitrate differs from the active bus bitrate.
Signed-off-by: Lucas Martins Alves <lucas.alves@lumal21.com.br>
Link: https://patch.msgid.link/20260714164839.771123-1-lucas.alves@lumal21.com.br
Fixes: 881ff67ad4 ("can: c_can: Added support for Bosch C_CAN controller")
Cc: stable@kernel.org
[mkl: remove space before close parenthesis]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
fw_parse() reads a fixed record header, a firmware-provided payload,
and a trailing checksum without knowing the end of the firmware blob. A
truncated record can therefore make those reads exceed the blob.
The same record also supplies addresses and lengths for writes into
DPRAM. The generic loader uses wrap-prone mixed signed arithmetic for its
bounds check, while the application loader does not bound the staging
copy at all.
Pass the firmware end to the parser and validate the full source record.
Use a signed wide offset for generic DPRAM records and validate the
application staging span against the mapped DPRAM before copying.
Fixes: 03fd3cf5a1 ("can: add driver for Softing card")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260722044347.2708-1-pengpeng@iscas.ac.cn
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Testing CANFD on RZ/G3E shows that many registers do not reset to their
initial values with the current flow of deasserting resets first and then
enabling clocks.
Based on the HW manual, clocks should be supplied first and the
resets deasserted afterward.
section 7.4.3 Procedure for Activating Modules: RZ/G2L
section 4.4.9.3 Procedure for Starting up Units: RZ/G3E
So, update the order of the initializing flow for resets and clocks
to match the hardware manual, resetting all CANFD registers to their
initial values. Also update rcar_canfd_global_deinit() to assert
resets before disabling clocks, so the teardown path mirrors the new
init ordering.
Fixes: 76e9353a80 ("can: rcar_canfd: Add support for RZ/G2L family")
Signed-off-by: Tu Nguyen <tu.nguyen.xg@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20260625135216.130450-1-biju.das.jz@bp.renesas.com
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The wait and bulk receive paths walk variable-length commands from a
USB buffer. A nonzero command shorter than CMD_HEADER_LEN can still be
dispatched, and the wait path copies a matching command into a fixed
caller-owned struct kvaser_cmd using the device-provided length.
Reject nonzero commands that do not contain the fixed header or that
extend beyond the current USB buffer item. In the wait path, also reject
a matching command that exceeds the destination before copying it.
Fixes: 080f40a6fa ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260722042221.44066-1-pengpeng@iscas.ac.cn
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The memory allocated for cmd is not freed after the call to
kvaser_usb_send_cmd() in both the normal and error paths.
Fix that by adding a kfree() immediately after the call.
Fixes: 39d3df6b0e ("can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Link: https://patch.msgid.link/20260722103906.108571-1-nihaal@cse.iitm.ac.in
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
pcan_usb_fd_decode_buf() walks uCAN records packed in one USB
receive buffer.
Require each record to contain the fixed header for its type, and verify
CAN payload bytes before copying them into the skb.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260706092836.79754-1-pengpeng@iscas.ac.cn
Fixes: 0a25e1f4f1 ("can: peak_usb: add support for PEAK new CANFD USB adapters")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In peak_usb_start(), each RX URB transfer buffer is allocated with kmalloc()
and the URB is flagged URB_FREE_BUFFER so that the final usb_free_urb() also
frees the transfer buffer.
If usb_submit_urb() fails, the error path frees the buffer explicitly with
kfree(buf) and then calls usb_free_urb(urb). Because URB_FREE_BUFFER is set,
usb_free_urb() -> urb_destroy() frees the same buffer a second time, a double
free of the transfer buffer.
BUG: KASAN: double-free in usb_free_urb.part.0+0x91/0xb0
Free of addr ffff8881069ccb80 by task trigger.sh/285
Call Trace:
kfree+0x113/0x3c0
usb_free_urb.part.0+0x91/0xb0
Drop the redundant kfree(buf); usb_free_urb() already releases the transfer
buffer. This mirrors commit 03819abbeb ("net: usb: lan78xx: Fix double free
issue with interrupt buffer allocation").
Fixes: bb4785551f ("can: usb: PEAK-System Technik USB adapters driver core")
Closes: https://lore.kernel.org/linux-can/178159320216.2154888.16953451793788581739@maoyixie.com/T/#u
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/178163373110.2507866.216458825145756798@maoyixie.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The channel control index ctrl_idx is derived from rx->len which comes
directly from a device USB payload. The mask 0x0f allows values 0-15, but
the array size of usb_if->dev[] is only 2. Values 2-15 cause heap
out-of-bounds read, eventually causing kernel panic in the IRQ context.
Add bounds checking for ctrl_idx before the array access in both
pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error().
Fixes: d8a199355f ("can: usb: PEAK-System Technik PCAN-USB Pro specific part")
Signed-off-by: James Gao <jamesgao5@outlook.com>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/TYWPR01MB8559DBAAAA6A7F410400329CF0012@TYWPR01MB8559.jpnprd01.prod.outlook.com
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The driver has a match table for the pci bus wired into its driver
structure, but the table is not exported with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE() entry so module alias information
is generated for automatic module loading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the driver registration structure, and the missing module alias
publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Acked-by: Pavel Pisa <pisa@fel.cvut.cz>
Link: https://patch.msgid.link/20260704151957.48194-1-pengpeng@iscas.ac.cn
Fixes: 792a5b678e ("can: ctucanfd: CTU CAN FD open-source IP core - PCI bus support.")
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Use self-test mode for CAN_CTRLMODE_PRESUME_ACK so transmitted
frames can complete without receiving an ACK.
ACK forbidden mode prevents the controller from acknowledging
received frames and does not implement the presume-ack behavior.
Fixes: 2dcb8e8782 ("can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part.")
Signed-off-by: Avi Weiss <thnkslprpt@gmail.com>
Acked-by: Pavel Pisa <pisa@fel.cvut.cz>
Link: https://patch.msgid.link/20260722192726.230729-1-thnkslprpt@gmail.com
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
