mirror of
https://github.com/torvalds/linux.git
synced 2026-07-28 01:55:51 +02:00
v7.2-rc1
47 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Chuck Lever
|
81246a6530 |
handshake: Require admin permission for DONE command
ACCEPT and DONE are the two downcalls of the handshake genl
family, both intended for use by the trusted handshake agent
(tlshd). ACCEPT already requires GENL_ADMIN_PERM; DONE has
no privilege check at all.
The fd-lookup in handshake_nl_done_doit() only confirms that
some pending handshake request exists for the supplied sockfd;
it does not authenticate the sender. An unprivileged process
that guesses or observes a valid sockfd can therefore submit
a DONE with HANDSHAKE_A_DONE_STATUS == 0, leaving the kernel
consumer to proceed as if the handshake succeeded. A non-zero
status on a forged DONE tears down a legitimate in-flight
handshake before tlshd can report its real result.
Fixes:
|
||
|
Chuck Lever
|
ea5fe6a73c |
net/handshake: Drain pending requests at net namespace exit
The arguments to list_splice_init() in handshake_net_exit() are
reversed. The call moves the local empty "requests" list onto
hn->hn_requests, leaving the local list empty, so the subsequent
drain loop runs zero iterations. Pending handshake requests that
had not yet been accepted are not torn down when the net namespace
is destroyed; each one keeps a reference on a socket file and on
the handshake_req allocation.
Pass the source and destination in the documented order
(list_splice_init(list, head) moves list onto head) so the pending
list is transferred to the local scratch list and drained through
handshake_complete().
Fixing the splice direction exposes a list-corruption race. After
the splice each req->hr_list still has non-empty link pointers,
threading the stack-local scratch list rather than hn_requests.
A concurrent handshake_req_cancel() -- for example, from sunrpc's
TLS timeout on a kernel socket whose netns reference was not
taken -- finds the request through the rhashtable, calls
remove_pending(), and sees !list_empty(&req->hr_list).
__remove_pending_locked() then list_del_init()s an entry off the
scratch list while the drain iterates, corrupting it. The same
call arriving after the drain loop has run list_del() on an
entry hits LIST_POISON instead.
Have remove_pending() check HANDSHAKE_F_NET_DRAINING under
hn_lock and report not-found when drain is in progress. The
drain has already taken ownership; handshake_complete()'s existing
test_and_set on HANDSHAKE_F_REQ_COMPLETED still arbitrates
between drain and cancel for who calls the consumer's hp_done. Use
list_del_init() rather than list_del() in the drain so req->hr_list
does not carry LIST_POISON after drain releases the entry.
The DRAINING guard in remove_pending() makes cancel return false,
but cancel still falls through to test_and_set_bit on
HANDSHAKE_F_REQ_COMPLETED and drops the request's hr_file reference.
Without another pin, if that is the last reference, sk_destruct frees
the request while it is still linked on the drain loop's local list.
Pin each request's hr_file under hn_lock before releasing the list,
and drop that drain pin after the loop finishes with the request.
Fixes:
|
||
|
Chuck Lever
|
204a5efde5 |
net/handshake: Verify file-reference balance in submit paths
The new file-reference contract on struct handshake_req is silently breakable: a missing get_file() at submit or a missing fput() on an error path leaves the file leaked but does not crash the test, so the existing absence-of-crash checks pass either way. Snapshot file_count(filp) before each handshake_req_submit() in the submit-success, EAGAIN, EBUSY, and cancel tests, and assert the expected balance after submit and again after cancel. The already-completed cancel test also asserts the post-complete balance, which pins down that handshake_complete() drops the reference and that the subsequent cancel does not double-fput. The destroy test gets the same treatment before __fput_sync(), which double-checks that cancel's fput() ran and the only remaining reference is the one sock_alloc_file() established. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Hannes Reinecke <hare@kernel.org> Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-7-66c616906ead@oracle.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Chuck Lever
|
5da98f55b1 |
net/handshake: Close the submit-side sock_hold race
handshake_req_submit() publishes the request via
handshake_req_hash_add() and __add_pending_locked(), drops
hn_lock, and calls handshake_genl_notify() (which can sleep)
before taking sock_hold() on req->hr_sk. A fast tlshd ACCEPT
followed by DONE can drive handshake_complete()'s sock_put()
into the window between the spin_unlock and the late
sock_hold(); on a system where the consumer's fd held the
only sk reference, the late sock_hold() then operates on an
sk whose refcount has reached zero.
The preceding two patches install an explicit file reference
on struct handshake_req. That file pins sock->file, which
pins the embedded struct socket, which defers inet_release()'s
sock_put(). As long as hr_file is held, sk cannot reach refcount
zero from the consumer side, and the submit-side sock_hold()
with its matching sock_put() calls in handshake_complete() and
handshake_req_cancel() is now redundant.
Drop all three. The file reference already keeps each request's
socket alive, and the lifetime story is contained in a single
get_file()/fput() pair.
Fixes:
|
||
|
Chuck Lever
|
f4251190e5 |
net/handshake: hand off the pinned file reference to accept_doit
handshake_req_next() removes the request from the per-net
pending list and drops hn_lock before handshake_nl_accept_doit()
reads req->hr_sk->sk_socket and dereferences sock->file (once in
FD_PREPARE() and again in get_file()). In that window a
consumer running tls_handshake_cancel() followed by sockfd_put()
(svc_sock_free) or __fput_sync() (xs_reset_transport) releases
sock->file. sock_release() then runs sock_orphan(), zeroing
sk_socket, and frees the struct socket. The accept-side code
either reads NULL through sk_socket or chases freed memory.
The submit-side sock_hold() does not prevent this. sk_refcnt
protects struct sock, but struct socket and sock->file are
independently refcounted via the file descriptor the consumer
owns. Pinning sk leaves sock and sock->file unprotected.
Retarget the accept-side dereferences at req->hr_file, which was
pinned at submit time, instead of req->hr_sk->sk_socket->file.
Pinning on its own is not sufficient: a consumer that cancels
between handshake_req_next() returning and accept_doit reaching
FD_PREPARE() takes the !remove_pending() branch in
handshake_req_cancel() and drops hr_file before the accept side
takes its own reference. Hand off an additional file reference
inside handshake_req_next(), under hn_lock, so the accept side
operates on a reference that no concurrent handshake_req_cancel()
can revoke. FD_PREPARE() consumes that handed-off reference,
either by transferring it to the new fd in fd_publish() or by
dropping it in the cleanup destructor on error; the explicit
get_file() that previously balanced FD_PREPARE() is therefore
redundant and goes away.
Update handshake_req_cancel_test2 and _test3 to simulate the
FD_PREPARE() consumption with an fput() so the kunit file-count
assertions stay balanced.
Reported-by: Chris Mason <clm@meta.com>
Fixes:
|
||
|
Chuck Lever
|
09dba37eee |
net/handshake: Take a long-lived file reference at submit
handshake_nl_accept_doit() needs the file pointer backing req->hr_sk->sk_socket to survive the window between handshake_req_next() and the subsequent FD_PREPARE() and get_file(). The submit-side sock_hold() does not provide that. sk_refcnt keeps struct sock alive, but struct socket is owned by sock->file: when the consumer fputs the last file reference, sock_release() tears the socket down regardless of any sock_hold. Add an hr_file pointer to struct handshake_req and acquire an explicit reference on sock->file during handshake_req_submit(). handshake_complete() and handshake_req_cancel() release the reference on the completion-bit-winning path. The submit error path must also release the file reference, but after rhashtable insertion a concurrent handshake_req_cancel() can discover the request and race the error path. Gate the error-path cleanup -- sk_destruct restoration, fput, and request destruction -- with test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED), the same serialization handshake_complete() and handshake_req_cancel() already use. When cancel has already claimed ownership, the submit error path returns without touching the request; socket teardown handles final destruction. The accept-side dereferences are not yet retargeted; that change comes in the next patch. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-4-66c616906ead@oracle.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Chuck Lever
|
6b22d433aa |
net/handshake: Pass negative errno through handshake_complete()
handshake_complete() declares status as unsigned int and
tls_handshake_done() negates that value (-status) before handing
it to the TLS consumer. Consumers match on negative errno
constants -- xs_tls_handshake_done() has
switch (status) {
case 0:
case -EACCES:
case -ETIMEDOUT:
lower_transport->xprt_err = status;
break;
default:
lower_transport->xprt_err = -EACCES;
}
so the API as designed expects callers to pass positive errno
values that the tlshd shim then negates.
Three internal callers in handshake_nl_accept_doit(), the
net-exit drain, and a kunit test follow kernel convention and
pass negative errnos -- -EIO, -ETIMEDOUT, -ETIMEDOUT. The
implicit conversion to unsigned int turns -ETIMEDOUT into
0xFFFFFF92; the subsequent -status in tls_handshake_done()
wraps back to 110, the consumer's switch falls through, and
the xprt reports -EACCES on what should be -ETIMEDOUT or -EIO.
Fix the API rather than the call sites. The natural kernel
convention is negative errno in, negative errno out. Change
handshake_complete() and hp_done to take int status, drop the
negation in tls_handshake_done(), and negate once in
handshake_nl_done_doit() where status arrives from the wire
as an unsigned netlink attribute. The three internal callers
were already correct under that convention and need no change.
At the same wire boundary, declare MAX_ERRNO as the netlink
policy upper bound for HANDSHAKE_A_DONE_STATUS. Attribute
validation rejects out-of-range values before
handshake_nl_done_doit() runs, and negating a bounded u32 there
stays within int range -- closing the UBSAN-visible signed-
integer overflow that an unconstrained u32 would invoke.
Fixes:
|
||
|
Chuck Lever
|
cc993e0927 |
net/handshake: Use spin_lock_bh for hn_lock
nvmet_tcp_state_change(), a socket callback that runs in BH context,
can reach handshake_req_cancel() via nvmet_tcp_schedule_release_queue()
and tls_handshake_cancel(). handshake_req_cancel() acquires
hn->hn_lock with plain spin_lock(). If a process-context thread on
the same CPU holds hn->hn_lock when a softirq invokes the cancel path,
the lock attempt deadlocks. This is the only caller that invokes
tls_handshake_cancel() from BH context; every other consumer calls it
from process context.
Deferring the cancel to process context in the NVMe target is not
straightforward: nvmet_tcp_schedule_release_queue() must call
tls_handshake_cancel() atomically with its state transition to
DISCONNECTING. If the cancel were deferred, the handshake completion
callback could fire in the window before the cancel runs, observe the
unexpected state, and return without dropping its kref on the queue.
Reworking that interlock is considerably more invasive than hardening
the handshake lock. Convert all hn->hn_lock acquisitions from
spin_lock/spin_unlock to spin_lock_bh/spin_unlock_bh so the lock is
never taken with softirqs enabled.
Fixes:
|
||
|
Kees Cook
|
69050f8d6d |
treewide: Replace kmalloc with kmalloc_obj for non-scalar types
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
Wang Liang
|
dabac51b81 |
net/handshake: Fix null-ptr-deref in handshake_complete()
A null pointer dereference in handshake_complete() was observed [1].
When handshake_req_next() return NULL in handshake_nl_accept_doit(),
function handshake_complete() will be called unexpectedly which triggers
this crash. Fix it by goto out_status when req is NULL.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN PTI
RIP: 0010:handshake_complete+0x36/0x2b0 net/handshake/request.c:288
Call Trace:
<TASK>
handshake_nl_accept_doit+0x32d/0x7e0 net/handshake/netlink.c:129
genl_family_rcv_msg_doit+0x204/0x300 net/netlink/genetlink.c:1115
genl_family_rcv_msg+0x436/0x670 net/netlink/genetlink.c:1195
genl_rcv_msg+0xcc/0x170 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x14c/0x430 net/netlink/af_netlink.c:2550
genl_rcv+0x2d/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x878/0xb20 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x897/0xd70 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa39/0xbf0 net/socket.c:2592
___sys_sendmsg+0x121/0x1c0 net/socket.c:2646
__sys_sendmsg+0x155/0x200 net/socket.c:2678
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x5f/0x350 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Fixes:
|
||
|
Scott Mayhew
|
15564bd67e |
net/handshake: duplicate handshake cancellations leak socket
When a handshake request is cancelled it is removed from the
handshake_net->hn_requests list, but it is still present in the
handshake_rhashtbl until it is destroyed.
If a second cancellation request arrives for the same handshake request,
then remove_pending() will return false... and assuming
HANDSHAKE_F_REQ_COMPLETED isn't set in req->hr_flags, we'll continue
processing through the out_true label, where we put another reference on
the sock and a refcount underflow occurs.
This can happen for example if a handshake times out - particularly if
the SUNRPC client sends the AUTH_TLS probe to the server but doesn't
follow it up with the ClientHello due to a problem with tlshd. When the
timeout is hit on the server, the server will send a FIN, which triggers
a cancellation request via xs_reset_transport(). When the timeout is
hit on the client, another cancellation request happens via
xs_tls_handshake_sync().
Add a test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED) in the pending cancel
path so duplicate cancels can be detected.
Fixes:
|
||
|
caoping
|
6af2a01d65 |
net/handshake: restore destructor on submit failure
handshake_req_submit() replaces sk->sk_destruct but never restores it when
submission fails before the request is hashed. handshake_sk_destruct() then
returns early and the original destructor never runs, leaking the socket.
Restore sk_destruct on the error path.
Fixes:
|
||
|
Linus Torvalds
|
8f7aa3d3c7 |
Networking changes for 6.19.
Core & protocols
----------------
- Replace busylock at the Tx queuing layer with a lockless list. Resulting
in a 300% (4x) improvement on heavy TX workloads, sending twice the
number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue. Normally we perform queue re-selection when flow comes out
of idle, but under extreme circumstances the flows may be constantly
busy. Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already did
for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is sadly
quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for packets.
- Make MPTCP use Rx backlog processing. This lowers the lock pressure,
improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor fit
for modern container workloads, where limits are imposed using cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid unnecessarily
aggressive rcvbuf growth and overshot when the connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC 5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API
----------
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics,
as defined by the OPEN Alliance's "Advanced diagnostic features
for 100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads IPsec
and performs RSS.
- Add info to devlink params whether the current setting is the default
or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame duplication
for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers
--------------
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback
for reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which supports
Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as other
drivers) to avoid wasting resources if feature is unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211 debugfs
interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=UoDR
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
|
||
|
Linus Torvalds
|
1b5dd29869 |
vfs-6.19-rc1.fd_prepare.fs
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaSmOZwAKCRCRxhvAZXjc
op0AAP4oNVJkFyvgKoPos5K2EGFB8M7merGhpYtsOoeg8UK6OwD/UySQErHsXQDR
sUDDa5uFOhfrkcfM8REtAN4wF8p5qAc=
=QgFD
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.19-rc1.fd_prepare.fs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fd prepare updates from Christian Brauner:
"This adds the FD_ADD() and FD_PREPARE() primitive. They simplify the
common pattern of get_unused_fd_flags() + create file + fd_install()
that is used extensively throughout the kernel and currently requires
cumbersome cleanup paths.
FD_ADD() - For simple cases where a file is installed immediately:
fd = FD_ADD(O_CLOEXEC, vfio_device_open_file(device));
if (fd < 0)
vfio_device_put_registration(device);
return fd;
FD_PREPARE() - For cases requiring access to the fd or file, or
additional work before publishing:
FD_PREPARE(fdf, O_CLOEXEC, sync_file->file);
if (fdf.err) {
fput(sync_file->file);
return fdf.err;
}
data.fence = fd_prepare_fd(fdf);
if (copy_to_user((void __user *)arg, &data, sizeof(data)))
return -EFAULT;
return fd_publish(fdf);
The primitives are centered around struct fd_prepare. FD_PREPARE()
encapsulates all allocation and cleanup logic and must be followed by
a call to fd_publish() which associates the fd with the file and
installs it into the caller's fdtable. If fd_publish() isn't called,
both are deallocated automatically. FD_ADD() is a shorthand that does
fd_publish() immediately and never exposes the struct to the caller.
I've implemented this in a way that it's compatible with the cleanup
infrastructure while also being usable separately. IOW, it's centered
around struct fd_prepare which is aliased to class_fd_prepare_t and so
we can make use of all the basica guard infrastructure"
* tag 'vfs-6.19-rc1.fd_prepare.fs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (42 commits)
io_uring: convert io_create_mock_file() to FD_PREPARE()
file: convert replace_fd() to FD_PREPARE()
vfio: convert vfio_group_ioctl_get_device_fd() to FD_ADD()
tty: convert ptm_open_peer() to FD_ADD()
ntsync: convert ntsync_obj_get_fd() to FD_PREPARE()
media: convert media_request_alloc() to FD_PREPARE()
hv: convert mshv_ioctl_create_partition() to FD_ADD()
gpio: convert linehandle_create() to FD_PREPARE()
pseries: port papr_rtas_setup_file_interface() to FD_ADD()
pseries: convert papr_platform_dump_create_handle() to FD_ADD()
spufs: convert spufs_gang_open() to FD_PREPARE()
papr-hvpipe: convert papr_hvpipe_dev_create_handle() to FD_PREPARE()
spufs: convert spufs_context_open() to FD_PREPARE()
net/socket: convert __sys_accept4_file() to FD_ADD()
net/socket: convert sock_map_fd() to FD_ADD()
net/kcm: convert kcm_ioctl() to FD_PREPARE()
net/handshake: convert handshake_nl_accept_doit() to FD_PREPARE()
secretmem: convert memfd_secret() to FD_ADD()
memfd: convert memfd_create() to FD_ADD()
bpf: convert bpf_token_create() to FD_PREPARE()
...
|
||
|
Christian Brauner
|
fe67b063f6
|
net/handshake: convert handshake_nl_accept_doit() to FD_PREPARE()
Link: https://patch.msgid.link/20251123-work-fd-prepare-v4-27-b6efa1706cfd@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Asbjørn Sloth Tønnesen
|
68e83f3472 |
tools: ynl-gen: add regeneration comment
Add a comment on regeneration to the generated files. The comment is placed after the YNL-GEN line[1], as to not interfere with ynl-regen.sh's detection logic. [1] and after the optional YNL-ARG line. Link: https://lore.kernel.org/r/aR5m174O7pklKrMR@zx2c4.com/ Suggested-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251120174429.390574-3-ast@fiberby.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Zilin Guan
|
3072f00bba |
net/handshake: Fix memory leak in tls_handshake_accept()
In tls_handshake_accept(), a netlink message is allocated using
genlmsg_new(). In the error handling path, genlmsg_cancel() is called
to cancel the message construction, but the message itself is not freed.
This leads to a memory leak.
Fix this by calling nlmsg_free() in the error path after genlmsg_cancel()
to release the allocated memory.
Fixes:
|
||
|
Hannes Reinecke
|
e22da46850 |
net/handshake: Add new parameter 'HANDSHAKE_A_ACCEPT_KEYRING'
Add a new netlink parameter 'HANDSHAKE_A_ACCEPT_KEYRING' to provide the serial number of the keyring to use. Signed-off-by: Hannes Reinecke <hare@kernel.org> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20250701144657.104401-1-hare@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Peter Zijlstra
|
cdd30ebb1b |
module: Convert symbol namespace to string literal
Clean up the existing export namespace code along the same lines of
commit
|
||
|
Al Viro
|
be5498cac2 |
remove pointless includes of <linux/fdtable.h>
some of those used to be needed, some had been cargo-culted for no reason... Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
A K M Fazla Mehrab
|
85d4cf56e9 |
net/handshake: use sockfd_put() helper
Replace fput() with sockfd_put() in handshake_nl_done_doit(). Signed-off-by: A K M Fazla Mehrab <a.mehrab@bytedance.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Link: https://patch.msgid.link/20240826182652.2449359-1-a.mehrab@bytedance.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Colin Ian King
|
c2b640529e |
net/handshake: remove redundant assignment to variable ret
The variable is being assigned an value and then is being re-assigned a new value in the next statement. The assignment is redundant and can be removed. Cleans up clang scan build warning: net/handshake/tlshd.c:216:2: warning: Value stored to 'ret' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/20240415100713.483399-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Chuck Lever
|
4e1d71cabb |
net/handshake: Fix handshake_req_destroy_test1
Recently, handshake_req_destroy_test1 started failing:
Expected handshake_req_destroy_test == req, but
handshake_req_destroy_test == 0000000000000000
req == 0000000060f99b40
not ok 11 req_destroy works
This is because "sock_release(sock)" was replaced with "fput(filp)"
to address a memory leak. Note that sock_release() is synchronous
but fput() usually delays the final close and clean-up.
The delay is not consequential in the other cases that were changed
but handshake_req_destroy_test1 is testing that handshake_req_cancel()
followed by closing the file actually does call the ->hp_destroy
method. Thus the PTR_EQ test at the end has to be sure that the
final close is complete before it checks the pointer.
We cannot use a completion here because if ->hp_destroy is never
called (ie, there is an API bug) then the test will hang.
Reported by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/netdev/ZcKDd1to4MPANCrn@tissot.1015granger.net/T/#mac5c6299f86799f1c71776f3a07f9c566c7c3c40
Fixes:
|
||
|
Jakub Kicinski
|
ec4c20ca09 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: net/mac80211/rx.c |
||
|
Moritz Wanzenböck
|
7798b59409 |
net/handshake: fix file ref count in handshake_nl_accept_doit()
If req->hr_proto->hp_accept() fail, we call fput() twice:
Once in the error path, but also a second time because sock->file
is at that point already associated with the file descriptor. Once
the task exits, as it would probably do after receiving an error
reading from netlink, the fd is closed, calling fput() a second time.
To fix, we move installing the file after the error path for the
hp_accept() call. In the case of errors we simply put the unused fd.
In case of success we can use fd_install() to link the sock->file
to the reserved fd.
Fixes:
|
||
|
Chuck Lever
|
160f404495 |
handshake: Fix sign of key_serial_t fields
key_serial_t fields are signed integers. Use nla_get/put_s32 for those to avoid implicit signed conversion in the netlink protocol. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/169530167716.8905.645746457741372879.stgit@oracle-102.nfsv4bat.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Chuck Lever
|
a6b07a51b1 |
handshake: Fix sign of socket file descriptor fields
Socket file descriptors are signed integers. Use nla_get/put_s32 for those to avoid implicit signed conversion in the netlink protocol. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/169530165057.8905.8650469415145814828.stgit@oracle-102.nfsv4bat.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jinjie Ruan
|
4a0f07d71b |
net/handshake: Fix memory leak in __sock_create() and sock_alloc_file()
When making CONFIG_DEBUG_KMEMLEAK=y and CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y,
modprobe handshake-test and then rmmmod handshake-test, the below memory
leak is detected.
The struct socket_alloc which is allocated by alloc_inode_sb() in
__sock_create() is not freed. And the struct dentry which is allocated
by __d_alloc() in sock_alloc_file() is not freed.
Since fput() will call file->f_op->release() which is sock_close() here and
it will call __sock_release(). and fput() will call dput(dentry) to free
the struct dentry. So replace sock_release() with fput() to fix the
below memory leak. After applying this patch, the following memory leak is
never detected.
unreferenced object 0xffff888109165840 (size 768):
comm "kunit_try_catch", pid 1852, jiffies 4294685807 (age 976.262s)
hex dump (first 32 bytes):
01 00 00 00 01 00 5a 5a 20 00 00 00 00 00 00 00 ......ZZ .......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8397993f>] sock_alloc_inode+0x1f/0x1b0
[<ffffffff81a2cb5b>] alloc_inode+0x5b/0x1a0
[<ffffffff81a32bed>] new_inode_pseudo+0xd/0x70
[<ffffffff8397889c>] sock_alloc+0x3c/0x260
[<ffffffff83979b46>] __sock_create+0x66/0x3d0
[<ffffffffa0209ba2>] 0xffffffffa0209ba2
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810f472008 (size 192):
comm "kunit_try_catch", pid 1852, jiffies 4294685808 (age 976.261s)
hex dump (first 32 bytes):
00 00 50 40 02 00 00 00 00 00 00 00 00 00 00 00 ..P@............
00 00 00 00 00 00 00 00 08 20 47 0f 81 88 ff ff ......... G.....
backtrace:
[<ffffffff81a1ff11>] __d_alloc+0x31/0x8a0
[<ffffffff81a2910e>] d_alloc_pseudo+0xe/0x50
[<ffffffff819d549e>] alloc_file_pseudo+0xce/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa0209bbb>] 0xffffffffa0209bbb
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810958e580 (size 224):
comm "kunit_try_catch", pid 1852, jiffies 4294685808 (age 976.261s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 03 00 2e 08 01 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff819d4b90>] alloc_empty_file+0x50/0x160
[<ffffffff819d4cf9>] alloc_file+0x59/0x730
[<ffffffff819d5524>] alloc_file_pseudo+0x154/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa0209bbb>] 0xffffffffa0209bbb
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810926dc88 (size 192):
comm "kunit_try_catch", pid 1854, jiffies 4294685809 (age 976.271s)
hex dump (first 32 bytes):
00 00 50 40 02 00 00 00 00 00 00 00 00 00 00 00 ..P@............
00 00 00 00 00 00 00 00 88 dc 26 09 81 88 ff ff ..........&.....
backtrace:
[<ffffffff81a1ff11>] __d_alloc+0x31/0x8a0
[<ffffffff81a2910e>] d_alloc_pseudo+0xe/0x50
[<ffffffff819d549e>] alloc_file_pseudo+0xce/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa0208fdc>] 0xffffffffa0208fdc
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810a241380 (size 224):
comm "kunit_try_catch", pid 1854, jiffies 4294685809 (age 976.271s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 03 00 2e 08 01 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff819d4b90>] alloc_empty_file+0x50/0x160
[<ffffffff819d4cf9>] alloc_file+0x59/0x730
[<ffffffff819d5524>] alloc_file_pseudo+0x154/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa0208fdc>] 0xffffffffa0208fdc
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888109165040 (size 768):
comm "kunit_try_catch", pid 1856, jiffies 4294685811 (age 976.269s)
hex dump (first 32 bytes):
01 00 00 00 01 00 5a 5a 20 00 00 00 00 00 00 00 ......ZZ .......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8397993f>] sock_alloc_inode+0x1f/0x1b0
[<ffffffff81a2cb5b>] alloc_inode+0x5b/0x1a0
[<ffffffff81a32bed>] new_inode_pseudo+0xd/0x70
[<ffffffff8397889c>] sock_alloc+0x3c/0x260
[<ffffffff83979b46>] __sock_create+0x66/0x3d0
[<ffffffffa0208860>] 0xffffffffa0208860
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810926d568 (size 192):
comm "kunit_try_catch", pid 1856, jiffies 4294685811 (age 976.269s)
hex dump (first 32 bytes):
00 00 50 40 02 00 00 00 00 00 00 00 00 00 00 00 ..P@............
00 00 00 00 00 00 00 00 68 d5 26 09 81 88 ff ff ........h.&.....
backtrace:
[<ffffffff81a1ff11>] __d_alloc+0x31/0x8a0
[<ffffffff81a2910e>] d_alloc_pseudo+0xe/0x50
[<ffffffff819d549e>] alloc_file_pseudo+0xce/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa0208879>] 0xffffffffa0208879
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810a240580 (size 224):
comm "kunit_try_catch", pid 1856, jiffies 4294685811 (age 976.347s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 03 00 2e 08 01 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff819d4b90>] alloc_empty_file+0x50/0x160
[<ffffffff819d4cf9>] alloc_file+0x59/0x730
[<ffffffff819d5524>] alloc_file_pseudo+0x154/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa0208879>] 0xffffffffa0208879
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888109164c40 (size 768):
comm "kunit_try_catch", pid 1858, jiffies 4294685816 (age 976.342s)
hex dump (first 32 bytes):
01 00 00 00 01 00 5a 5a 20 00 00 00 00 00 00 00 ......ZZ .......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8397993f>] sock_alloc_inode+0x1f/0x1b0
[<ffffffff81a2cb5b>] alloc_inode+0x5b/0x1a0
[<ffffffff81a32bed>] new_inode_pseudo+0xd/0x70
[<ffffffff8397889c>] sock_alloc+0x3c/0x260
[<ffffffff83979b46>] __sock_create+0x66/0x3d0
[<ffffffffa0208541>] 0xffffffffa0208541
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810926cd18 (size 192):
comm "kunit_try_catch", pid 1858, jiffies 4294685816 (age 976.342s)
hex dump (first 32 bytes):
00 00 50 40 02 00 00 00 00 00 00 00 00 00 00 00 ..P@............
00 00 00 00 00 00 00 00 18 cd 26 09 81 88 ff ff ..........&.....
backtrace:
[<ffffffff81a1ff11>] __d_alloc+0x31/0x8a0
[<ffffffff81a2910e>] d_alloc_pseudo+0xe/0x50
[<ffffffff819d549e>] alloc_file_pseudo+0xce/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa020855a>] 0xffffffffa020855a
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810a240200 (size 224):
comm "kunit_try_catch", pid 1858, jiffies 4294685816 (age 976.342s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 03 00 2e 08 01 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff819d4b90>] alloc_empty_file+0x50/0x160
[<ffffffff819d4cf9>] alloc_file+0x59/0x730
[<ffffffff819d5524>] alloc_file_pseudo+0x154/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa020855a>] 0xffffffffa020855a
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888109164840 (size 768):
comm "kunit_try_catch", pid 1860, jiffies 4294685817 (age 976.416s)
hex dump (first 32 bytes):
01 00 00 00 01 00 5a 5a 20 00 00 00 00 00 00 00 ......ZZ .......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8397993f>] sock_alloc_inode+0x1f/0x1b0
[<ffffffff81a2cb5b>] alloc_inode+0x5b/0x1a0
[<ffffffff81a32bed>] new_inode_pseudo+0xd/0x70
[<ffffffff8397889c>] sock_alloc+0x3c/0x260
[<ffffffff83979b46>] __sock_create+0x66/0x3d0
[<ffffffffa02093e2>] 0xffffffffa02093e2
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810926cab8 (size 192):
comm "kunit_try_catch", pid 1860, jiffies 4294685817 (age 976.416s)
hex dump (first 32 bytes):
00 00 50 40 02 00 00 00 00 00 00 00 00 00 00 00 ..P@............
00 00 00 00 00 00 00 00 b8 ca 26 09 81 88 ff ff ..........&.....
backtrace:
[<ffffffff81a1ff11>] __d_alloc+0x31/0x8a0
[<ffffffff81a2910e>] d_alloc_pseudo+0xe/0x50
[<ffffffff819d549e>] alloc_file_pseudo+0xce/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa02093fb>] 0xffffffffa02093fb
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810a240040 (size 224):
comm "kunit_try_catch", pid 1860, jiffies 4294685817 (age 976.416s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 03 00 2e 08 01 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff819d4b90>] alloc_empty_file+0x50/0x160
[<ffffffff819d4cf9>] alloc_file+0x59/0x730
[<ffffffff819d5524>] alloc_file_pseudo+0x154/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa02093fb>] 0xffffffffa02093fb
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888109166440 (size 768):
comm "kunit_try_catch", pid 1862, jiffies 4294685819 (age 976.489s)
hex dump (first 32 bytes):
01 00 00 00 01 00 5a 5a 20 00 00 00 00 00 00 00 ......ZZ .......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8397993f>] sock_alloc_inode+0x1f/0x1b0
[<ffffffff81a2cb5b>] alloc_inode+0x5b/0x1a0
[<ffffffff81a32bed>] new_inode_pseudo+0xd/0x70
[<ffffffff8397889c>] sock_alloc+0x3c/0x260
[<ffffffff83979b46>] __sock_create+0x66/0x3d0
[<ffffffffa02097c1>] 0xffffffffa02097c1
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810926c398 (size 192):
comm "kunit_try_catch", pid 1862, jiffies 4294685819 (age 976.489s)
hex dump (first 32 bytes):
00 00 50 40 02 00 00 00 00 00 00 00 00 00 00 00 ..P@............
00 00 00 00 00 00 00 00 98 c3 26 09 81 88 ff ff ..........&.....
backtrace:
[<ffffffff81a1ff11>] __d_alloc+0x31/0x8a0
[<ffffffff81a2910e>] d_alloc_pseudo+0xe/0x50
[<ffffffff819d549e>] alloc_file_pseudo+0xce/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa02097da>] 0xffffffffa02097da
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888107e0b8c0 (size 224):
comm "kunit_try_catch", pid 1862, jiffies 4294685819 (age 976.489s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 03 00 2e 08 01 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff819d4b90>] alloc_empty_file+0x50/0x160
[<ffffffff819d4cf9>] alloc_file+0x59/0x730
[<ffffffff819d5524>] alloc_file_pseudo+0x154/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa02097da>] 0xffffffffa02097da
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888109164440 (size 768):
comm "kunit_try_catch", pid 1864, jiffies 4294685821 (age 976.487s)
hex dump (first 32 bytes):
01 00 00 00 01 00 5a 5a 20 00 00 00 00 00 00 00 ......ZZ .......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff8397993f>] sock_alloc_inode+0x1f/0x1b0
[<ffffffff81a2cb5b>] alloc_inode+0x5b/0x1a0
[<ffffffff81a32bed>] new_inode_pseudo+0xd/0x70
[<ffffffff8397889c>] sock_alloc+0x3c/0x260
[<ffffffff83979b46>] __sock_create+0x66/0x3d0
[<ffffffffa020824e>] 0xffffffffa020824e
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810f4cf698 (size 192):
comm "kunit_try_catch", pid 1864, jiffies 4294685821 (age 976.501s)
hex dump (first 32 bytes):
00 00 50 40 02 00 00 00 00 00 00 00 00 00 00 00 ..P@............
00 00 00 00 00 00 00 00 98 f6 4c 0f 81 88 ff ff ..........L.....
backtrace:
[<ffffffff81a1ff11>] __d_alloc+0x31/0x8a0
[<ffffffff81a2910e>] d_alloc_pseudo+0xe/0x50
[<ffffffff819d549e>] alloc_file_pseudo+0xce/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa0208267>] 0xffffffffa0208267
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888107e0b000 (size 224):
comm "kunit_try_catch", pid 1864, jiffies 4294685821 (age 976.501s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 03 00 2e 08 01 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff819d4b90>] alloc_empty_file+0x50/0x160
[<ffffffff819d4cf9>] alloc_file+0x59/0x730
[<ffffffff819d5524>] alloc_file_pseudo+0x154/0x210
[<ffffffff83978582>] sock_alloc_file+0x42/0x1b0
[<ffffffffa0208267>] 0xffffffffa0208267
[<ffffffff829cf03a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81236fc6>] kthread+0x2b6/0x380
[<ffffffff81096afd>] ret_from_fork+0x2d/0x70
[<ffffffff81003511>] ret_from_fork_asm+0x11/0x20
Fixes:
|
||
|
Eric Dumazet
|
82ba0ff7bf |
net/handshake: fix null-ptr-deref in handshake_nl_done_doit()
We should not call trace_handshake_cmd_done_err() if socket lookup has failed. Also we should call trace_handshake_cmd_done_err() before releasing the file, otherwise dereferencing sock->sk can return garbage. This also reverts |
||
|
Chuck Lever
|
b470985c76 |
net/handshake: Trace events for TLS Alert helpers
Add observability for the new TLS Alert infrastructure. Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/169047947409.5241.14548832149596892717.stgit@oracle-102.nfsv4bat.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Chuck Lever
|
39d0e38dcc |
net/handshake: Add helpers for parsing incoming TLS Alerts
Kernel TLS consumers can replace common TLS Alert parsing code with these helpers. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/169047942074.5241.13791647439480672048.stgit@oracle-102.nfsv4bat.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Chuck Lever
|
35b1b538d4 |
net/handshake: Add API for sending TLS Closure alerts
This helper sends an alert only if a TLS session was established. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Link: https://lore.kernel.org/r/169047936730.5241.618595693821012638.stgit@oracle-102.nfsv4bat.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
173780ff18 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: include/linux/mlx5/driver.h |
||
|
Lin Ma
|
361b6889ae |
net/handshake: remove fput() that causes use-after-free
A reference underflow is found in TLS handshake subsystem that causes a direct use-after-free. Part of the crash log is like below: [ 2.022114] ------------[ cut here ]------------ [ 2.022193] refcount_t: underflow; use-after-free. [ 2.022288] WARNING: CPU: 0 PID: 60 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110 [ 2.022432] Modules linked in: [ 2.022848] RIP: 0010:refcount_warn_saturate+0xbe/0x110 [ 2.023231] RSP: 0018:ffffc900001bfe18 EFLAGS: 00000286 [ 2.023325] RAX: 0000000000000000 RBX: 0000000000000007 RCX: 00000000ffffdfff [ 2.023438] RDX: 0000000000000000 RSI: 00000000ffffffea RDI: 0000000000000001 [ 2.023555] RBP: ffff888004c20098 R08: ffffffff82b392c8 R09: 00000000ffffdfff [ 2.023693] R10: ffffffff82a592e0 R11: ffffffff82b092e0 R12: ffff888004c200d8 [ 2.023813] R13: 0000000000000000 R14: ffff888004c20000 R15: ffffc90000013ca8 [ 2.023930] FS: 0000000000000000(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 [ 2.024062] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.024161] CR2: ffff888003601000 CR3: 0000000002a2e000 CR4: 00000000000006f0 [ 2.024275] Call Trace: [ 2.024322] <TASK> [ 2.024367] ? __warn+0x7f/0x130 [ 2.024430] ? refcount_warn_saturate+0xbe/0x110 [ 2.024513] ? report_bug+0x199/0x1b0 [ 2.024585] ? handle_bug+0x3c/0x70 [ 2.024676] ? exc_invalid_op+0x18/0x70 [ 2.024750] ? asm_exc_invalid_op+0x1a/0x20 [ 2.024830] ? refcount_warn_saturate+0xbe/0x110 [ 2.024916] ? refcount_warn_saturate+0xbe/0x110 [ 2.024998] __tcp_close+0x2f4/0x3d0 [ 2.025065] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [ 2.025168] tcp_close+0x1f/0x70 [ 2.025231] inet_release+0x33/0x60 [ 2.025297] sock_release+0x1f/0x80 [ 2.025361] handshake_req_cancel_test2+0x100/0x2d0 [ 2.025457] kunit_try_run_case+0x4c/0xa0 [ 2.025532] kunit_generic_run_threadfn_adapter+0x15/0x20 [ 2.025644] kthread+0xe1/0x110 [ 2.025708] ? __pfx_kthread+0x10/0x10 [ 2.025780] ret_from_fork+0x2c/0x50 One can enable CONFIG_NET_HANDSHAKE_KUNIT_TEST config to reproduce above crash. The root cause of this bug is that the commit |
||
|
Jakub Kicinski
|
9b66ee06e5 |
net: ynl: prefix uAPI header include with uapi/
To keep things simple we used to include the uAPI header in the kernel in the #include <linux/$family.h> format. This works well enough, most of the genl families should have headers in include/net/ so linux/$family.h ends up referring to the uAPI header, anyway. And if it doesn't no big deal, we'll just include more info than we need. Unless that is there is a naming conflict. Someone recently created include/linux/psp.h which will be a problem when supporting the PSP protocol. (I'm talking about work-in-progress patches, but it's just a proof that assuming lack of name conflicts was overly optimistic.) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Chuck Lever
|
26fb5480a2 |
net/handshake: Enable the SNI extension to work properly
Enable the upper layer protocol to specify the SNI peername. This
avoids the need for tlshd to use a DNS lookup, which can return a
hostname that doesn't match the incoming certificate's SubjectName.
Fixes:
|
||
|
Chuck Lever
|
1ce77c998f |
net/handshake: Unpin sock->file if a handshake is cancelled
If user space never calls DONE, sock->file's reference count remains
elevated. Enable sock->file to be freed eventually in this case.
Reported-by: Jakub Kacinski <kuba@kernel.org>
Fixes:
|
||
|
Chuck Lever
|
fc490880e3 |
net/handshake: handshake_genl_notify() shouldn't ignore @flags
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes:
|
||
|
Chuck Lever
|
7afc6d0a10 |
net/handshake: Fix uninitialized local variable
trace_handshake_cmd_done_err() simply records the pointer in @req,
so initializing it to NULL is sufficient and safe.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes:
|
||
|
Chuck Lever
|
7ea9c1ec66 |
net/handshake: Fix handshake_dup() ref counting
If get_unused_fd_flags() fails, we ended up calling fput(sock->file)
twice.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Fixes:
|
||
|
Chuck Lever
|
a095326e2c |
net/handshake: Remove unneeded check from handshake_dup()
handshake_req_submit() now verifies that the socket has a file.
Fixes:
|
||
|
Chuck Lever
|
18c40a1cc1 |
net/handshake: Fix sock->file allocation
sock->file = sock_alloc_file(sock, O_NONBLOCK, NULL);
^^^^ ^^^^
sock_alloc_file() calls release_sock() on error but the left hand
side of the assignment dereferences "sock". This isn't the bug and
I didn't report this earlier because there is an assert that it
doesn't fail.
net/handshake/handshake-test.c:221 handshake_req_submit_test4() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:233 handshake_req_submit_test4() warn: 'req' was already freed.
net/handshake/handshake-test.c:254 handshake_req_submit_test5() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:290 handshake_req_submit_test6() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:321 handshake_req_cancel_test1() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:355 handshake_req_cancel_test2() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:367 handshake_req_cancel_test2() warn: 'req' was already freed.
net/handshake/handshake-test.c:395 handshake_req_cancel_test3() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:407 handshake_req_cancel_test3() warn: 'req' was already freed.
net/handshake/handshake-test.c:451 handshake_req_destroy_test1() error: dereferencing freed memory 'sock'
net/handshake/handshake-test.c:463 handshake_req_destroy_test1() warn: 'req' was already freed.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes:
|
||
|
Chuck Lever
|
b21c7ba6d9 |
net/handshake: Squelch allocation warning during Kunit test
The "handshake_req_alloc excessive privsize" kunit test is intended
to check what happens when the maximum privsize is exceeded. The
WARN_ON_ONCE_GFP at mm/page_alloc.c:4744 can be disabled safely for
this test.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixes:
|
||
|
Geert Uytterhoeven
|
6aa445e396 |
net/handshake: Fix section mismatch in handshake_exit
If CONFIG_NET_NS=n (e.g. m68k/defconfig):
WARNING: modpost: vmlinux.o: section mismatch in reference: handshake_exit (section: .exit.text) -> handshake_genl_net_ops (section: .init.data)
ERROR: modpost: Section mismatches detected.
Fix this by dropping the __net_initdata tag from handshake_genl_net_ops.
Fixes:
|
||
|
Chuck Lever
|
88232ec1ec |
net/handshake: Add Kunit tests for the handshake consumer API
These verify the API contracts and help exercise lifetime rules for consumer sockets and handshake_req structures. One way to run these tests: ./tools/testing/kunit/kunit.py run --kunitconfig ./net/handshake/.kunitconfig Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Chuck Lever
|
2fd5532044 |
net/handshake: Add a kernel API for requesting a TLSv1.3 handshake
To enable kernel consumers of TLS to request a TLS handshake, add support to net/handshake/ to request a handshake upcall. This patch also acts as a template for adding handshake upcall support for other kernel transport layer security providers. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Chuck Lever
|
3b3009ea8a |
net/handshake: Create a NETLINK service for handling handshake requests
When a kernel consumer needs a transport layer security session, it first needs a handshake to negotiate and establish a session. This negotiation can be done in user space via one of the several existing library implementations, or it can be done in the kernel. No in-kernel handshake implementations yet exist. In their absence, we add a netlink service that can: a. Notify a user space daemon that a handshake is needed. b. Once notified, the daemon calls the kernel back via this netlink service to get the handshake parameters, including an open socket on which to establish the session. c. Once the handshake is complete, the daemon reports the session status and other information via a second netlink operation. This operation marks that it is safe for the kernel to use the open socket and the security session established there. The notification service uses a multicast group. Each handshake mechanism (eg, tlshd) adopts its own group number so that the handshake services are completely independent of one another. The kernel can then tell via netlink_has_listeners() whether a handshake service is active and prepared to handle a handshake request. A new netlink operation, ACCEPT, acts like accept(2) in that it instantiates a file descriptor in the user space daemon's fd table. If this operation is successful, the reply carries the fd number, which can be treated as an open and ready file descriptor. While user space is performing the handshake, the kernel keeps its muddy paws off the open socket. A second new netlink operation, DONE, indicates that the user space daemon is finished with the socket and it is safe for the kernel to use again. The operation also indicates whether a session was established successfully. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |