The genpd provider bus is really only used when
CONFIG_PM_GENERIC_DOMAINS_OF is enabled, and since the recent deferred
initialisation of domain parent devices, the root device pointer is
otherwise unused.
Fix the unused variable warning by moving the definition of the root device
pointer inside the corresponding ifdef.
Fixes: 92b69eff80 ("pmdomain: core: fix early domain registration")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606111746.kAxaAbwg-lkp@intel.com/
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
A recent change switching to a dynamically allocated root device broke
platforms like rcar-sysc that registers PM domains before the PM domain
bus itself has been registered (cf. commit c5ae5a0c61 ("pmdomain:
renesas: rcar-sysc: Add genpd OF provider at postcore_initcall")).
Defer the assignment of the parent root device until the domain is
registered with driver core to avoid it being left unset.
Fixes: a96e40f4af ("pmdomain: core: switch to dynamic root device")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/CAMuHMdUHabMGJyJ7e7yp7DLC+JJc9k6NK9p4anj2wRKNuwZUng@mail.gmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Merge the pmdomain fixes for v7.1-rc[n] into the next branch, to allow
them to get tested together with the pmdomain changes that are targeted
for the next release.
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The kernel-doc parser cannot parse 'struct __packed mtk_mfg_opp_entry {'.
Move __packed to the closing brace, which is the more common kernel style.
Assisted-by: Opencode:Big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Add RPM power domain support for Shikra, reusing SM6125 power
domains with RPM_SMD_LEVEL_TURBO_NO_CPR as the max state.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Rakesh Kota <rakesh.kota@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Add RPMh power domains required for Nord SoC. This includes
new definitions for power domains supplying GFX1 and NSP3 subsystem.
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
for_each_child_of_node_scoped() decrements the reference count of the
nod after each iteration. Assigning it without incrementing the refcount
to a dynamically allocated platform device will result in a double put
in platform_device_release(). Add the missing call to of_node_get().
Cc: stable@vger.kernel.org
Fixes: 3e4d109ee8 ("pmdomain: imx: gpc: Simplify with scoped for each OF child loop")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Set wakeup constraint for any device in a wakeup path. All parent devices
of a wakeup device should not be turned off during suspend. This ensures
the wakeup device is kept on while the system is suspended.
Cc: stable@vger.kernel.org
Fixes: 9d8aa0dd3b ("pmdomain: ti_sci: add wakeup constraint management")
Reported-by: Vitor Soares <vitor.soares@toradex.com>
Closes: https://lore.kernel.org/linux-pm/c0fe43a2339c802e9ce5900092cd530a2ba17a6b.camel@gmail.com/
Signed-off-by: Kendall Willis <k-willis@ti.com>
Reviewed-by: Sebin Francis <sebin.francis@ti.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
While bringing up the PowerVR GPU on the A733 (Radxa Cubie A7Z), we
found that one of the GPU power domains must be configured as "always
on." While the Radxa BSP device tree leaves the GPU power domain nodes
commented out, the GPU driver code contains traces indicating an "always
on" requirement [1].
Currently, sunxi_pck600_desc only supports specifying pd_names. This
patch introduces sunxi_pck600_pd_desc, which stores both the name and
its associated flags. This also (more or less) aligns the implementation
with the existing sun50i PPU handling of always-on domains.
With this change, individual power domains can now be configured more
granularly. In particular, the GPU_CORE domain in sun60i_a733_pck600_pds
can now be explicitly marked with GENPD_FLAG_ALWAYS_ON.
The patch was tested on the Radxa Cubie A7Z, where the GPU now functions
as expected.
Thanks to Icenowy for her support and expertise on sunxi and PowerVR,
and thanks to Mikhail for identifying this exact cause of the GPU
bring-up issue.
[1] https://github.com/radxa/allwinner-bsp/blob/cubie-aiot-v1.4.6/modules/gpu/img-bxm/linux/rogue_km/services/system/rogue/rgx_sunxi/sunxi_platform.c#L62
Signed-off-by: Yuanshen Cao <alex.caoys@gmail.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Driver core expects devices to be dynamically allocated and will, for
example, complain loudly if a device that lacks a release function is
ever freed.
Use root_device_register() to allocate and register the root device
instead of open coding using a static device.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies. Switch to unified
"Qualcomm" so it will be easier for users to identify the options when
for example running menuconfig.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
After primary SCMI pmdomain is created, use new of_genpd helper which
checks for child domain mappings defined in power-domains-child-ids.
Also remove any child domain mappings when SCMI domain is removed.
Signed-off-by: Kevin Hilman (TI) <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Currently, PM domains can only support hierarchy for simple
providers (e.g. ones with #power-domain-cells = 0).
Add support for oncell providers as well by adding a new property
`power-domains-child-ids` to describe the parent/child relationship.
For example, an SCMI PM domain provider has multiple domains, each of
which might be a child of diffeent parent domains. In this example,
the parent domains are MAIN_PD and WKUP_PD:
scmi_pds: protocol@11 {
reg = <0x11>;
#power-domain-cells = <1>;
power-domains = <&MAIN_PD>, <&WKUP_PD>;
power-domains-child-ids = <15>, <19>;
};
With this example using the new property, SCMI PM domain 15 becomes a
child domain of MAIN_PD, and SCMI domain 19 becomes a child domain of
WKUP_PD.
To support this feature, add two new core functions
- of_genpd_add_child_ids()
- of_genpd_remove_child_ids()
which can be called by pmdomain providers to add/remove child domains
if they support the new property power-domains-child-ids.
The add function is "all or nothing". If it cannot add all of the
child domains in the list, it will unwind any additions already made
and report a failure.
Signed-off-by: Kevin Hilman (TI) <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In scpsys_get_bus_protection_legacy(), of_find_node_with_property()
returns a device node with its reference count incremented. The function
then calls of_node_put(node) before checking whether
syscon_regmap_lookup_by_phandle() returns an error. If an error occurs,
dev_err_probe() dereferences the node pointer to print diagnostic
information, but the node memory may have already been freed due to the
earlier of_node_put(), leading to a use-after-free vulnerability.
Fix this by moving the of_node_put() call after the error check, ensuring
the node is still valid when accessed in the error path.
Fixes: c29345fa5f ("pmdomain: mediatek: Refactor bus protection regmaps retrieval")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
If a device is attached to a PM domain through genpd_dev_pm_attach_by_id(),
genpd calls pm_runtime_enable() for the corresponding virtual device that
it registers. While this avoids boilerplate code in drivers, there is no
corresponding call to pm_runtime_disable() in genpd_dev_pm_detach().
This means these virtual devices are typically detached from its genpd,
while runtime PM remains enabled for them, which is not how things are
designed to work. In worst cases it may lead to critical errors, like a
NULL pointer dereference bug in genpd_runtime_suspend(), which was recently
reported. For another case, we may end up keeping an unnecessary vote for a
performance state for the device.
To fix these problems, let's add this missing call to pm_runtime_disable()
in genpd_dev_pm_detach().
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdWapT40hV3c+CSBqFOW05aWcV1a6v_NiJYgoYi0i9_PDQ@mail.gmail.com/
Fixes: 3c095f32a9 ("PM / Domains: Add support for multi PM domains per device to genpd")
Cc: stable@vger.kernel.org
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add the RPMh power domains required for the Hawi SoC. This includes
new definitions for domains supplying specific hardware components:
- DCX: supplies VDD_DISP
- GBX: supplies VDD_GFX_BX
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Allows the buildbots to build the driver on other platforms. There's
nothing special arch specific thing going on here.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the pmdomain fixes for v7.0-rc[n] into the next branch, to allow
them to get tested together with the pmdomain changes that are targeted
for the next release.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Remove kcalloc by using a flexible array member to combine allocations.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The Allwinner A733 PCK600, similar to A523 PCK600, is likely a
customized version of ARM PCK-600 power controller. It shares the same
BSP driver with A523. According to the BSP provided by Radxa, unlike
A523, it doesn't require reset, as well as a different pair of delay
values.
Make reset optional in the sunxi pck600 driver and add support
for A733.
Signed-off-by: Yuanshen Cao <alex.caoys@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org> # matched against BSP driver
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add RPMh Power Domains support for the Eliza platform. The list of power
domains is taken from downstream. Even though the cmd-db does list MMCX
and MXC, they are not used, so they should not be describe.
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
It can be discussed how useful a print is after a successful probe. In the
SCMI power domain case it's seems valuable, as it let us inform about the
number of initialized power domains too, which is fetched from firmware.
Therefore, let's add a print about this, which also aligns with the
behaviour of the SCMI perf domain driver.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@kernel.org>
Change the dev_err() to dev_err_probe() under rockchip_pd_power_on()
to prevent errors early in the boot process when the requested
regulator is not yet available. This converts errors like the following
to debug messages:
rockchip-pm-domain fd8d8000.power-management:power-controller: Failed to enable supply: -517
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Introduce a new power domain (pmd) driver for the MediaTek mt8189 SoC.
This driver ports and refines the power domain framework, dividing
hardware blocks (CPU, GPU, peripherals, etc.) into independent power
domains for precise and energy-efficient power management.
Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In MT8189 mminfra power domain, the bus protect policy separates
into two parts, one is set before subsys clocks enabled, and another
need to enable after subsys clocks enable.
Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To allow user space to monitor the selection of the domain idle state
during s2idle for a CPU PM domain, let's extend the debugfs support in
genpd with this information.
Suggested-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Similar to how cpuidle provides the values for latency and residency for
CPU's idle states through sysfs, let's make the corresponding data for PM
domain's idle states available for user space, via genpd's debugfs support.
Suggested-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To prepare for additional information to be added for the domain idle
states in genpd's debugfs, let's make the existing information denser. To
allow that, let's move the static information of the domain idle states
into a separate debugfs file.
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Drop the unnecessary semicolon after the rpmpd_send_corner()
function's declaration.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In imx_sc_pd_get_console_rsrc(), it does not release the reference.
Fixes: 893cfb9973 ("firmware: imx: scu-pd: do not power off console domain")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In omap_prm_domain_attach_dev, it does not release the reference.
Fixes: 58cbff023b ("soc: ti: omap-prm: Add basic power domain support")
Signed-off-by: Felix Gu <gu_0233@qq.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add the Audio power domain of the MT7622 SoC to the legacy
mtk-scpsys driver (as this legacy SoC is supported only there).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
For devices capable of out-of-band system wakeups via I/O daisy chaining,
prevent sending wakeup constraints to the PM co-processor. This allows
the system to enter deeper low power modes, as the device is not marked
as requiring power.
Replaces the logic from commit b06bc47279 ("pmdomain: ti_sci: handle
wake IRQs for IO daisy chain wakeups") since checking out-of-band wakeup
will cover the same functionality.
Detect out-of-band wakeup in the suspend path, and if it exists, skip
sending the constraint.
Signed-off-by: Kendall Willis <k-willis@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Implement nvmem-provider functionality in mtk-mfg-pmdomain, such that it
can expose its GF_REG_SHADER_PRESENT value in the shared memory as an
nvmem cell for panthor.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Define power domain which needs to be enabled in order for audio to work
on the PXA1908-based samsung,coreprimevelte smartphone. In the
downstream code, this power-on method is marked as specific to the ULCx
series which is allegedly a codename of sorts with ULC1 corresponding to
the PXA1908.
No other audio components needed for sound to work on this phone are
currently available mainline but some successful testing was performed
with the vendor variants of the respective drivers and with the domain
forced always-on.
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Reviewed-by: Duje Mihanović <duje@dujemihanovic.xyz>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This particular block can have DT subnodes describing the LVDS LDB, MIPI
DSI and parallel DPI bridge.
Scan for possible sub-devices within the driver, instead of misusing the
simple-bus to perform the scan.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Convert the driver to devm_ APIs only by making use of
devm_add_action_or_reset() and devm_pm_runtime_enable() to simplify the
probe error path and to drop the .remove() callback. This also ensures
that the device release order equals the device probe error path order.
Furthermore drop the dev_set_drvdata() usage since the only user was the
.remove() callback which is removed by this commit.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Call dev_err_probe() directly during return to make the code more
compact.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Keep the NOC_HDCP clock always enabled to fix the potential hang
caused by the NoC ADB400 port power down handshake.
Fixes: 77b0ddb42a ("soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The bcm2835_asb_control() function uses a tight polling loop to wait
for the ASB bridge to acknowledge a request. During intensive workloads,
this handshake intermittently fails for V3D's master ASB on BCM2711,
resulting in "Failed to disable ASB master for v3d" errors during
runtime PM suspend. As a consequence, the failed power-off leaves V3D in
a broken state, leading to bus faults or system hangs on later accesses.
As the timeout is insufficient in some scenarios, increase the polling
timeout from 1us to 5us, which is still negligible in the context of a
power domain transition. Also, replace the open-coded ktime_get_ns()/
cpu_relax() polling loop with readl_poll_timeout_atomic().
Cc: stable@vger.kernel.org
Fixes: 670c672608 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The wrong value of the number of domains is wrong which leads to
failures when trying to enumerate nested power domains.
PM: genpd_xlate_onecell: invalid domain index 0
PM: genpd_xlate_onecell: invalid domain index 1
PM: genpd_xlate_onecell: invalid domain index 3
PM: genpd_xlate_onecell: invalid domain index 4
PM: genpd_xlate_onecell: invalid domain index 5
PM: genpd_xlate_onecell: invalid domain index 13
PM: genpd_xlate_onecell: invalid domain index 14
Attempts to use these power domains fail, so fix this by
using the correct value of calculated power domains.
Signed-off-by: Adam Ford <aford173@gmail.com>
Fixes: 88914db077 ("pmdomain: mediatek: Add support for Hardware Voter power domains")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
>From the RK3588 TRM Table 7-1 RK3588 Voltage Domain and Power Domain Summary,
PD_RKVDEC0/1 and PD_VENC0/1 rely on VD_VCODEC which require extra voltages to
be applied, otherwise it breaks RK3588-evb1-v10 board after vdec support landed[1].
The panic looks like below:
rockchip-pm-domain fd8d8000.power-management:power-controller: failed to set domain 'rkvdec0' on, val=0
rockchip-pm-domain fd8d8000.power-management:power-controller: failed to set domain 'rkvdec1' on, val=0
...
Hardware name: Rockchip RK3588S EVB1 V10 Board (DT)
Workqueue: pm genpd_power_off_work_fn
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x40/0x84
dump_stack+0x18/0x24
vpanic+0x1ec/0x4fc
vpanic+0x0/0x4fc
check_panic_on_warn+0x0/0x94
arm64_serror_panic+0x6c/0x78
do_serror+0xc4/0xcc
el1h_64_error_handler+0x3c/0x5c
el1h_64_error+0x6c/0x70
regmap_mmio_read32le+0x18/0x24 (P)
regmap_bus_reg_read+0xfc/0x130
regmap_read+0x188/0x1ac
regmap_read+0x54/0x78
rockchip_pd_power+0xcc/0x5f0
rockchip_pd_power_off+0x1c/0x4c
genpd_power_off+0x84/0x120
genpd_power_off+0x1b4/0x260
genpd_power_off_work_fn+0x38/0x58
process_scheduled_works+0x194/0x2c4
worker_thread+0x2ac/0x3d8
kthread+0x104/0x124
ret_from_fork+0x10/0x20
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x3000000,000e0005,40230521,0400720b
Memory Limit: none
---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]---
Chaoyi pointed out the PD_VCODEC is the parent of PD_RKVDEC0/1 and PD_VENC0/1, so checking
the PD_VCODEC is enough.
[1] https://lore.kernel.org/linux-rockchip/20251020212009.8852-2-detlev.casanova@collabora.com/
Fixes: db6df2e3fc ("pmdomain: rockchip: add regulator support")
Cc: stable@vger.kernel.org
Suggested-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
bcm2835_reset_status() has a misplaced parenthesis on every PM_READ()
call. Since PM_READ(reg) expands to readl(power->base + (reg)), the
expression:
PM_READ(PM_GRAFX & PM_V3DRSTN)
computes the bitwise AND of the register offset PM_GRAFX with the
bitmask PM_V3DRSTN before using the result as a register offset, reading
from the wrong MMIO address instead of the intended PM_GRAFX register.
The same issue affects the PM_IMAGE cases.
Fix by moving the closing parenthesis so PM_READ() receives only the
register offset, and the bitmask is applied to the value returned by
the read.
Fixes: 670c672608 ("soc: bcm: bcm2835-pm: Add support for power domains under a new binding.")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Passing pm_runtime_put() return value to the callers is not particularly
useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example.
Accordingly, update imx_pgc_domain_suspend() to simply discard the
return value of pm_runtime_put() and always return success to the
caller.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/15658107.tv2OnDr8pf@rafael.j.wysocki
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
