Highlights:
- amd/hfi: Add support for dynamic ranking tables (version 3)
- amd/pmc:
- Add PMC driver support for AMD 1Ah M80H SoC
- Delay suspend for some Lenovo Laptops to avoid keyboard and lid
switch problems after s2idle
- arm64: qcom-hamoa-ec: Add Hamoa/Purwa/Glymur EC driver
- asus-armoury: add support for G614PR, GA402NJ, GA403UM, and FX608JPR
- asus-wmi: add keystone dongle support
- dell-dw5826e: Add reset driver for DW5826e
- dell-laptop: Fix rollback path
- hp-wmi:
- Add support for Omen 16-ap0xxx (board ID 8D26) and board ID 8B2F
- intel-hid:
- Add HP ProBook x360 440 G1 5 button array support
- Prevent racing ACPI notify handlers
- intel/pmc:
- Add Nova Lake support
- Rate-limit LTR scale-factor warning
- intel-uncore-freq:
- Expose instance ID in the sysfs
- Fix current_freq_khz after CPU hotplug
- intel/vsec: Restore BAR fallback for header walk
- ISST: Restore SST-PP control to all domains
- lenovo-wmi-*:
- Add more CPU tunable attributes
- Add GPU tunable attributes
- Add WMI battery charge limiting
- oxpec: add support for OneXPlayer Super X
- sel3350-platform: Retain LED state on load and unload
- surface: SAM: Add support for Surface Pro 12in
- uniwill-laptop: Add support for battery charge modes
- tools/power/x86/intel-speed-select: Harden daemon pidfile open
- Major refactoring efforts:
- ACPI driver to platform driver conversion
- Converting drivers to use the improved WMI API
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
ACPI:
- provide acpi_bus_find_device_by_name()
alienware-wmi-base:
- Transition to new WMI API
amd: hfi:
- Support for ranking table versions
amd/hsmp:
- Clamp ioctl/send_message indices (Spectre v1)
amd/pmc:
- Add delay_suspend module parameter
- Add PMC driver support for AMD 1Ah M80H SoC
- Check for intermediate wakeup in function
- Delay suspend for some Lenovo Laptops
- Don't log during intermediate wakeups
- Use per-SoC cpu_info struct for SMU mailbox and IP info
apple-gmux:
- Drop unused assignment of pnp_device_id driver data
arm64:
- Add driver for EC found on Qualcomm reference devices
arm64: qcom-hamoa-ec:
- Fix indentation in comment tables
arm64 Use named initializers for struct i2c_device_id:
- arm64 Use named initializers for struct i2c_device_id
asus-armoury:
- add support for FX608JPR
- add support for G614PR
- add support for GA402NJ
- add support for GA403UM
asus-wmi:
- add keystone dongle support
barco-p50-gpio:
- attach software node to its target GPIO device
classmate-laptop:
- Address memory leaks on driver removal
- Convert accel driver to a platform one
- Convert ipml driver to a platform one
- Convert keys driver to a platform one
- Convert tablet driver to a platform one
- Convert v4 accel driver to a platform one
- Pass struct device pointer to helpers
- Register ACPI notify handlers directly
- Rename two helper functions
- Unify probe rollback and remove code
dell-ddv:
- Use new buffer-based WMI API
dell-descriptor:
- Use new buffer-based WMI API
dell-dw5826e:
- Add reset driver for DW5826e
dell-laptop:
- add Inspiron N5110 to touchpad LED quirk table
- fix missing cleanups in init error path
dell-privacy:
- correct CONFIG_DELL_WMI_PRIVACY macro name in comments
- Use new buffer-based WMI API
dell_rbu:
- use strscpy in image_type_write
dell-smbios-wmi:
- Use new buffer-based WMI API
dell-wmi-base:
- Use new buffer-based WMI API
docs:
- fix typo in uniwill-laptop.rst
hp-wmi:
- Add support for Omen 16-ap0xxx (8D26)
- Add support for Omen 16-ap0xxx (8E35)
- Add thermal support for board 8B2F
hwmon:
- (dell-smm) Use new buffer-based WMI API
intel-hid:
- Add HP ProBook x360 440 G1 to button_array_table
- Protect ACPI notify handler against recursion
intel/pmc:
- Add ACPI PWRM telemetry driver for Nova Lake S
- Add Nova Lake support to intel_pmc_core driver
- Add NVL PCI IDs for SSRAM telemetry discovery
- Add PMC SSRAM Kconfig description
- Add support for variable DMU offsets
- Enable Pkgc blocking residency counter
- Enable PkgC LTR blocking counter
- rate-limit LTR scale-factor warning
- Retrieve PMC info only for available PMCs
intel/pmc/ssram:
- Add ACPI discovery scaffolding
- Add PCI platform data
- Make PMT registration optional
- Refactor DEVID/PWRMBASE extraction into helper
- Rename probe and PCI ID table for consistency
- Switch to static array with per-index probe state
intel/pmc:
- Use __free() in pmc_core_punit_pmt_init()
- Use PCI DID for PMC SSRAM device discovery
intel/pmt:
- Add pre/post decode hooks around header parsing
- Cache the telemetry discovery header
intel/pmt/crashlog:
- Split init into pre-decode
intel/pmt:
- Pass discovery index instead of resource
intel/pmt/telemetry:
- Move overlap check to post-decode hook
intel/pmt:
- Unify header fetch and add ACPI source
intel/tpmi:
- convert mutex in mem_write() to guard
- use cleanup helpers in mem_write()
intel-uncore-freq:
- Expose instance ID in the sysfs
- Fix current_freq_khz after CPU hotplug
- Rename instance_id
intel/vsec:
- allocate res with intel_vsec_dev
- Restore BAR fallback for header walk
ISST:
- Restore SST-PP control to all domains
lenovo-wmi-capdata:
- Add debugfs file for dumping capdata
lenovo-wmi-helpers:
- Add helper for creating per-device debugfs dir
lenovo-wmi-other:
- Add force_load_psy_ext module parameter
- Add GPU tunable attributes
- Add missing CPU tunable attributes
- Add WMI battery charge limiting
- Rename LWMI_OM_FW_ATTR_BASE_PATH
meraki-mx100:
- use real software node references
modpost:
- Handle malformed WMI GUID strings
Move delayed work on system_dfl_wq:
- Move delayed work on system_dfl_wq
msi-ec:
- Add support for MSI Pulse GL66 12th Gen
oxpec:
- add support for OneXPlayer Super X
panasonic-laptop:
- simplify allocation of sinf
pcengines-apuv2:
- reduce indiraction in swnode assignment
pmc_atom:
- Use named initializer for pci_device_id array
sel3350-platform:
- Retain LED state on load and unload
sonypi:
- use strscpy() in sonypi_acpi_probe
surface: SAM:
- Add support for Surface Pro 12in
thinkpad_acpi:
- Add debugfs entry to display HWDD raw
- Remove unneeded goto
tools/power/x86/intel-speed-select:
- Harden daemon pidfile open
uniwill-laptop:
- Add support for battery charge modes
- Enable battery charge modes on supported devices
- Mark EC_ADDR_OEM_4 as volatile
- Rework FN lock/super key suspend handling
use u8 * for raw byte buffers:
- use u8 * for raw byte buffers
wmi:
- Make sysfs attributes const
- Make wmi_bus_class const
x86-android-tablets:
- enable fwnode matching of GPIO chips
- Use named initializers for struct i2c_device_id
x86/platform/olpc: xo15:
- Convert ACPI driver to a platform one
- Drop wakeup source on driver removal
xo15-ebook:
- Convert ACPI driver to a platform one
- Fix formatting of labels
- Fix wakeup source and GPE handling
- Register ACPI notify handler directly
- Use devres-based resource management
Merges:
- Merge branch 'fixes' into for-next
- Merge branch 'fixes' of into for-next
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into review-ilpo-next
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCajl8LgAKCRBZrE9hU+XO
MZ47AP0Z0IoiT8WEcXL4wuTQyR6ruXWClYk82wiroAFEko8Z5AD/WYNWCBXqjZk+
FlJbtleRLA/ADmgT3Mj+biHNTIqyBA0=
=Q3d+
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/hfi: Add support for dynamic ranking tables (version 3)
- amd/pmc:
- Add PMC driver support for AMD 1Ah M80H SoC
- Delay suspend for some Lenovo Laptops to avoid keyboard and lid
switch problems after s2idle
- arm64: qcom-hamoa-ec: Add Hamoa/Purwa/Glymur EC driver
- asus-armoury: add support for G614PR, GA402NJ, GA403UM, and FX608JPR
- asus-wmi: add keystone dongle support
- dell-dw5826e: Add reset driver for DW5826e
- dell-laptop: Fix rollback path
- hp-wmi:
- Add support for Omen 16-ap0xxx (board ID 8D26) and board ID 8B2F
- intel-hid:
- Add HP ProBook x360 440 G1 5 button array support
- Prevent racing ACPI notify handlers
- intel/pmc:
- Add Nova Lake support
- Rate-limit LTR scale-factor warning
- intel-uncore-freq:
- Expose instance ID in the sysfs
- Fix current_freq_khz after CPU hotplug
- intel/vsec: Restore BAR fallback for header walk
- ISST: Restore SST-PP control to all domains
- lenovo-wmi-*:
- Add more CPU tunable attributes
- Add GPU tunable attributes
- Add WMI battery charge limiting
- oxpec: add support for OneXPlayer Super X
- sel3350-platform: Retain LED state on load and unload
- surface: SAM: Add support for Surface Pro 12in
- uniwill-laptop: Add support for battery charge modes
- tools/power/x86/intel-speed-select: Harden daemon pidfile open
- Major refactoring efforts:
- ACPI driver to platform driver conversion
- Converting drivers to use the improved WMI API
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (115 commits)
platform/x86/intel/pmc: Add NVL PCI IDs for SSRAM telemetry discovery
platform/x86/intel/pmc/ssram: Make PMT registration optional
platform/x86/intel/pmc/ssram: Add ACPI discovery scaffolding
platform/x86/intel/pmc/ssram: Switch to static array with per-index probe state
platform/x86/intel/pmc/ssram: Refactor DEVID/PWRMBASE extraction into helper
platform/x86/intel/pmc/ssram: Add PCI platform data
platform/x86/intel/pmc/ssram: Rename probe and PCI ID table for consistency
platform/x86/intel/pmc: Add ACPI PWRM telemetry driver for Nova Lake S
platform/x86/intel/pmc: Add PMC SSRAM Kconfig description
platform/x86/intel/pmt: Unify header fetch and add ACPI source
platform/x86/intel/pmt: Cache the telemetry discovery header
platform/x86/intel/pmt: Pass discovery index instead of resource
platform/x86/intel/pmt/telemetry: Move overlap check to post-decode hook
platform/x86/intel/pmt/crashlog: Split init into pre-decode
platform/x86/intel/pmt: Add pre/post decode hooks around header parsing
modpost: Handle malformed WMI GUID strings
platform/wmi: Make sysfs attributes const
platform/wmi: Make wmi_bus_class const
hwmon: (dell-smm) Use new buffer-based WMI API
platform/x86: dell-ddv: Use new buffer-based WMI API
...
Here is the big set of USB and Thunderbolt driver changes for 7.2-rc1.
Lots of little stuff in here, major highlights include:
- USB4STREAM support for Thunderbolt devices. A new way to send "raw"
data very quickly over a USB4 connection to another system directly.
- Other thunderbolt updates and changes to make the stream code work
- xhci driver updates and additions
- typec driver updates and additions
- usb gadget driver updates and fixes for reported issues
- zh_CN documentation translation of the USB documentation
- usb-serial driver updates
- dts cleanups for some USB platforms
- other minor USB driver updates and tweaks
All of these have been in linux-next for over a week with no reported
issues, most of them for many many weeks.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCajk1lg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymieQCg1VgSwN2sXBtMDGi4Sca+ecADx2kAn0bm/e/C
JjShAcuQ/vj/6zNJm0ll
=vXkP
-----END PGP SIGNATURE-----
Merge tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 7.2-rc1.
Lots of little stuff in here, major highlights include:
- USB4STREAM support for Thunderbolt devices. A new way to send "raw"
data very quickly over a USB4 connection to another system directly
- Other thunderbolt updates and changes to make the stream code work
- xhci driver updates and additions
- typec driver updates and additions
- usb gadget driver updates and fixes for reported issues
- zh_CN documentation translation of the USB documentation
- usb-serial driver updates
- dts cleanups for some USB platforms
- other minor USB driver updates and tweaks
All of these have been in linux-next for over a week with no reported
issues, most of them for many many weeks"
* tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (131 commits)
usb: ucsi: huawei_gaokun: support mode switching
thunderbolt: debugfs: Fix sideband write size check
thunderbolt: debugfs: Fix margining error counter buffer leak
usb: host: xhci-rcar: Split R-Car Gen2 and Gen3 .plat_start() handling
usb: host: xhci-rcar: Remove SET_XHCI_PLAT_PRIV_FOR_RCAR() macro
usb: xhci: allocate internal DCBAA mirror dynamically
usb: xhci: allocate DCBAA based on host controller max slots
usb: xhci: refactor DCBAA struct
xhci: Prevent queuing new commands if xhci is inaccessible
xhci: dbc: detect and recover hung DbC during enumeraton
xhci: dbc: add timestamps to DbC state changes in a new helper.
xhci: dbc: add helper to set and clear DbC DCE enable bit
xhci: dbc: serialize enabling and disabling dbc
xhci: dbc: Fix sysfs ABI Documentation for xhci dbc states
usb: xhci: Improve Soft Retries after short transfers
usb: xhci: Remove isochronous URB_SHORT_NOT_OK handling
usb: xhci: Remove skip_isoc_td()
usb: xhci: Simplify xhci_quiesce()
usb: xhci: remove legacy 'num_trbs_free' tracking
usb: xhci: fix typo in xhci_set_port_power() comment
...
Only ufs driver updates this time, apart from which this is just an
assortment of bug fixes and AI assisted changes. The biggest other
change is the reversion of the sas_user_scan patch which supported a
mpi3mr NVME behaviour but caused major issues for other sas
controllers. The next biggest is the removal of target reset in
tcm_loop.c.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCajfkNxsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIUNpAD+LZEfeMQpNZrEd4Ug/1IGHjnDvEnGp3Wx
lDfSEVqLqfABAIKqL0npb+kjgdkGT3IuugIboX27/XDBcCb6mPQdXIst
=6T7N
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Only ufs driver updates this time, apart from which this is just an
assortment of bug fixes and AI assisted changes.
The biggest other change is the reversion of the sas_user_scan patch
which supported a mpi3mr NVME behaviour but caused major issues for
other sas controllers. The next biggest is the removal of target reset
in tcm_loop.c"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (56 commits)
scsi: target: Remove tcm_loop target reset handling
scsi: lpfc: Fix spelling mistakes in comments
scsi: ufs: ufs-pci: Add AMD device ID support
scsi: ufs: core: Handle PM commands timeout before SCSI EH
scsi: devinfo: Broaden Promise VTrak E310/E610 identification
scsi: target: Use constant-time crypto_memneq() for CHAP digests
scsi: target: Fix hexadecimal CHAP_I handling
scsi: scsi_debug: Fix one-partition tape setup bounds
scsi: ufs: qcom: dt-bindings: Document the Hawi UFS controller
scsi: mailmap: Update Avri Altman's email address
scsi: ufs: Remove redundant vops NULL check and trivial wrapper
scsi: ufs: Remove unnecessary return in void vops wrappers
scsi: ufs: Fix wrong value printed in unexpected UPIU response case
scsi: ufs: core: Fix NULL pointer dereference in scsi_cmd_priv() calls
scsi: megaraid_mbox: Avoid double kfree()
scsi: pm8001: Fix error code in non_fatal_log_show()
scsi: lpfc: Turn lpfc_queue q_pgs into a flexible array
scsi: ufs: core: Skip link param validation when lanes_per_direction is unset
scsi: sas: Skip opt_sectors when DMA reports no real optimization hint
scsi: Revert "scsi: Fix sas_user_scan() to handle wildcard and multi-channel scans"
...
* New drivers for the following chips
- Analog Devices LTC4283 Swap Controller
- Analog Devices MAX20830
- Analog Devices MAX20860A
- ARCTIC Fan Controller
- Delta E50SN12051
- Luxshare LX1308
- Microchip EMC1812/13/14/15/33
- Monolithic MP2985
- Murata D1U74T PSU
* New chip support added to existing drivers
- asus-ec-sensors: Support for ROG MAXIMUS Z790 EXTREME, ROG STRIX B850-E
GAMING WIFI, and ROG STRIX B650E-E GAMING WIFI
- dell-smm: Add Dell Latitude 7530 to fan control whitelist
- nct6683: Support for ASRock Z890 Pro-A
- pmbus: Support for Flex BMR316, BMR321, BMR350 and BMR351
- pmbus/max34440: Support for ADPM12250
- pmbus/xdp720: Support for Infineon xdp730, and fix driver issues
reported by Sashiko
* New functionality
- Add support for update_interval_us chip attribute, and support it
in ina238 driver
- Add support for guard() and scoped_guard() for subsystem locks,
and use it in adt7411, ina2xx, and lm90 drivers
- emc2305: Support configurable fan PWM at shutdown
- lm63: Expose PWM frequency and LUT hysteresis as writable
- lm75: Support active-high alert polarity
- nct7802: Add time step attributes for tweaking responsiveness
- pmbus/adm1266: Add rtc debugfs entries for rtc, powerup_counter,
clear_blackbox, and firmware_revision
- raspberrypi: Fix delayed-work teardown race, add voltage input support
as well as voltage domain IDs
mcp9982: Add support for reporting external diode faults
* Miscellaneous bug fixes, changes and improvements
- Use named initializers for platform_device_id arrays and
i2c_device_data, and remove unused driver data
- Various drivers: Move MODULE_DEVICE_TABLE next to the table itself
- ads7871: Convert to hwmon_device_register_with_info(), and use
DMA-safe buffer for SPI writes
- adt7411: document supported sysfs attributes
- adt7462: Add of_match_table to support devicetree
- adt7475: Add explicit header include
- coretemp; Fix outdated documentation, coding style issues, and
replace hardcoded core count with dynamic value
- cros_ec: Drop unused assignment of platform_device_id driver data
- emc2305: Fix fan channel index handling
- gpd-fan: Reject EC PWM value 0 as invalid, fix race condition between
device removal and sysfs access, upgrade log level from warn to err for
platform device creation failure, initialize EC before registering hwmon
device, drop global driver data and use per-device allocation
- htu31: document debugfs serial_number
- ina238: Add support for samples and update_interval
- it87: Clamp negative values to zero in set_fan()
- lm75: Add explicit header include, Add explicit default cases in
lm75_is_visible(), and add section for sysfs interface to documentation
- pmbus/lm25066: Fix PMBus coefficients for LM5064/5066/5066i
- tmp102: Use device_property_read_string API
- tmp401: Read "ti,n-factor" as signed
- Convert zyxel,nsa320-mcu to DT schema
-----BEGIN PGP SIGNATURE-----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=mDMd
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers for the following chips:
- Analog Devices LTC4283 Swap Controller
- Analog Devices MAX20830
- Analog Devices MAX20860A
- ARCTIC Fan Controller
- Delta E50SN12051
- Luxshare LX1308
- Microchip EMC1812/13/14/15/33
- Monolithic MP2985
- Murata D1U74T PSU
New chip support added to existing drivers:
- asus-ec-sensors: Support for ROG MAXIMUS Z790 EXTREME, ROG STRIX
B850-E GAMING WIFI, and ROG STRIX B650E-E GAMING WIFI
- dell-smm: Add Dell Latitude 7530 to fan control whitelist
- nct6683: Support for ASRock Z890 Pro-A
- pmbus: Support for Flex BMR316, BMR321, BMR350 and BMR351
- pmbus/max34440: Support for ADPM12250
- pmbus/xdp720: Support for Infineon xdp730, and fix driver issues
reported by Sashiko
New functionality:
- Add support for update_interval_us chip attribute, and support it
in ina238 driver
- Add support for guard() and scoped_guard() for subsystem locks, and
use it in adt7411, ina2xx, and lm90 drivers
- emc2305: Support configurable fan PWM at shutdown
- lm63: Expose PWM frequency and LUT hysteresis as writable
- lm75: Support active-high alert polarity
- nct7802: Add time step attributes for tweaking responsiveness
- pmbus/adm1266: Add rtc debugfs entries for rtc, powerup_counter,
clear_blackbox, and firmware_revision
- raspberrypi: Fix delayed-work teardown race, add voltage input
support as well as voltage domain IDs
- mcp9982: Add support for reporting external diode faults
Miscellaneous bug fixes, changes and improvements:
- Use named initializers for platform_device_id arrays and
i2c_device_data, and remove unused driver data
- Various drivers: Move MODULE_DEVICE_TABLE next to the table itself
- ads7871: Convert to hwmon_device_register_with_info(), and use
DMA-safe buffer for SPI writes
- adt7411: document supported sysfs attributes
- adt7462: Add of_match_table to support devicetree
- adt7475: Add explicit header include
- coretemp; Fix outdated documentation, coding style issues, and
replace hardcoded core count with dynamic value
- cros_ec: Drop unused assignment of platform_device_id driver data
- emc2305: Fix fan channel index handling
- gpd-fan: Reject EC PWM value 0 as invalid, fix race condition
between device removal and sysfs access, upgrade log level from
warn to err for platform device creation failure, initialize EC
before registering hwmon device, drop global driver data and use
per-device allocation
- htu31: document debugfs serial_number
- ina238: Add support for samples and update_interval
- it87: Clamp negative values to zero in set_fan()
- lm75: Add explicit header include, Add explicit default cases in
lm75_is_visible(), and add section for sysfs interface to
documentation
- pmbus/lm25066: Fix PMBus coefficients for LM5064/5066/5066i
- tmp102: Use device_property_read_string API
- tmp401: Read "ti,n-factor" as signed
- Convert zyxel,nsa320-mcu to DT schema"
* tag 'hwmon-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (81 commits)
hwmon: tmp401: Read "ti,n-factor" as signed
hwmon: (pmbus/lm25066) Fix PMBus coefficients for LM5064/5066/5066i
hwmon: (gpd-fan) Reject EC PWM value 0 as invalid
hwmon: (dell-smm) Add Dell Latitude 7530 to fan control whitelist
hwmon: temperature: add support for EMC1812
dt-bindings: hwmon: temperature: add support for EMC1812
hwmon: (gpd-fan): fix race condition between device removal and sysfs access
hwmon: (gpd-fan): upgrade log level from warn to err for platform device creation failure
hwmon: (gpd-fan): Initialize EC before registering hwmon device
hwmon: (gpd-fan): drop global driver data and use per-device allocation
hwmon: (pmbus/max34440): add support adpm12250
hwmon: (ina238) Add update_interval_us attribute
hwmon: Add update_interval_us chip attribute
hwmon: (ina238) Add support for samples and update_interval
gpio: gpio-ltc4283: Add support for the LTC4283 Swap Controller
hwmon: ltc4283: Add support for the LTC4283 Swap Controller
dt-bindings: hwmon: Document the LTC4283 Swap Controller
hwmon: (pmbus/xdp720) Fix driver issues xdp720/730
hwmon: (pmbus/xdp720) Add support for efuse xdp730
dt-bindings: hwmon/pmbus: Add Infineon xdp730
...
- CPUID API updates (Ahmed S. Darwish):
- Introduce a centralized CPUID parser
- Introduce a centralized CPUID data model
- Introduce <asm/cpuid/leaf_types.h>
- Rename cpuid_leaf()/cpuid_subleaf() APIs
- treewide: Explicitly include the x86 CPUID headers
- Update to x86-cpuid-db v3.1 (Maciej Wieczor-Retman)
- Continued removal of pre-i586 support and related
simplifications (Ingo Molnar)
- Add Intel CPU model number for rugged Panther Lake
(Tony Luck)
- Misc fixes, updates and cleanups by Arnd Bergmann, Chao Gao,
Lukas Bulwahn, Sohil Mehta, Maciej Wieczor-Retman.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=tpai
-----END PGP SIGNATURE-----
Merge tag 'x86-cpu-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Ingo Molnar:
- CPUID API updates (Ahmed S. Darwish):
- Introduce a centralized CPUID parser
- Introduce a centralized CPUID data model
- Introduce <asm/cpuid/leaf_types.h>
- Rename cpuid_leaf()/cpuid_subleaf() APIs
- treewide: Explicitly include the x86 CPUID headers
- Update to x86-cpuid-db v3.1 (Maciej Wieczor-Retman)
- Continued removal of pre-i586 support and related simplifications
(Ingo Molnar)
- Add Intel CPU model number for rugged Panther Lake (Tony Luck)
- Misc fixes, updates and cleanups by Arnd Bergmann, Chao Gao, Lukas
Bulwahn, Sohil Mehta, Maciej Wieczor-Retman.
* tag 'x86-cpu-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (25 commits)
x86/cpu: Make CONFIG_X86_CX8 unconditional
x86/cpu: Remove unused !CONFIG_X86_TSC code
x86/cpuid: Update bitfields to x86-cpuid-db v3.1
tools/x86/kcpuid: Update bitfields to x86-cpuid-db v3.1
x86/cpu: Make CONFIG_X86_TSC unconditional
MAINTAINERS: Drop obsolete FPU EMULATOR section
x86/cpu: Fix a F00F bug warning and clean up surrounding code
x86/cpu: Add Intel CPU model number for rugged Panther Lake
x86/cpuid: Introduce a centralized CPUID parser
x86/cpu: Introduce a centralized CPUID data model
x86/cpuid: Introduce <asm/cpuid/leaf_types.h>
x86/cpuid: Rename cpuid_leaf()/cpuid_subleaf() APIs
x86/cpu: Do not include the CPUID API header in asm/processor.h
Documentation: core-api/cpu_hotplug: Remove stale cpu0_hotplug docs
x86/cpu, cpufreq: Remove AMD ELAN support
x86/fpu: Remove the math-emu/ FPU emulation library
x86/fpu: Remove the 'no387' boot option
x86/fpu: Remove MATH_EMULATION and related glue code
treewide: Explicitly include the x86 CPUID headers
x86/cpu: Remove the CONFIG_X86_INVD_BUG quirk
...
The "ti,n-factor" binding and examples allow negative correction
values. Reading it as u32 makes the helper type disagree with the
documented signed value and hides real schema mismatches.
Use the signed helper so the DT access matches the s32 value stored by
the driver.
Assisted-by: Codex:gpt-5-5
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260612215332.1889497-1-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use the new buffer-based WMI API to also support ACPI firmware
implementations that do not use ACPI buffers for returning the
results of a SMM call.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260610203453.816254-7-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Swap the high setting and low setting coefficients in the lm25066_coeff
table for LM5064, LM5066, and LM5066i. The coefficients were previously
mapped incorrectly, resulting in inverted current and power scaling.
Additionally, dynamically assign the exponent (R) registers inside the
probe's LM25066_DEV_SETUP_CL check. This ensures that the proper
exponent is applied (e.g., for LM25056, high setting power exponent
is -4, but low setting power exponent is -3).
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Link: https://lore.kernel.org/r/20260611-lm25066-driver-fix-v3-1-9d7d4b4e253d@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This is the hwmon driver for Microchip EMC1812/13/14/15/33
Multichannel Low-Voltage Remote Diode Sensor Family.
EMC1812 has one external remote temperature monitoring channel.
EMC1813 has two external remote temperature monitoring channels.
EMC1814 has three external remote temperature monitoring channels,
channels 2 and 3 support anti parallel diode.
EMC1815 has four external remote temperature monitoring channels and
channels 1/2 and 3/4 support anti parallel diode.
EMC1833 has two external remote temperature monitoring channels and
channels 1 and 2 support anti parallel diode.
Resistance Error Correction is supported on channels 1/2 and 3/4.
Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
Link: https://lore.kernel.org/r/20260610-hw_mon-emc1812-v11-2-cef809af5c19@microchip.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Replace the manual gpd_fan_remove() callback with a devres-managed
action using devm_add_action_or_reset(). The original remove hook
resets the fan to AUTOMATIC mode, but the hwmon sysfs interface
(registered with devm_hwmon_device_register_with_info()) remains
active until after the remove callback completes. This creates a
race window where a concurrent userspace sysfs access can interleave
with the EC I/O sequence, potentially corrupting EC registers.
Using devm_add_action_or_reset() registers the reset function as a
devres action. Due to the LIFO release order of devres, the hwmon
device is unregistered (sysfs removed) before the reset action
executes, eliminating the race condition.
Fixes: 0ab88e2394 ("hwmon: add GPD devices sensor driver")
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://lore.kernel.org/r/4400828422cf3a88adad4db224d9efccdb1049d2.1781055639.git.xiaopei01@kylinos.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Move the gpd_init_ec() call to before devm_hwmon_device_register_with_info
in the probe function. With the previous ordering the hwmon device was
registered and exposed to userspace before the EC initialization
completes, creating a window where sysfs reads could return invalid values.
Some buggy firmware won't initialize EC properly on boot. Before its
initialization, reading RPM will always return 0, and writing PWM will have
no effect. So move gpd_init_ec to before hwmon device register.
Fixes: 0ab88e2394 ("hwmon: add GPD devices sensor driver")
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://lore.kernel.org/r/4be3734b135c8013157979ab5e80c7ee51243ddd.1781055639.git.xiaopei01@kylinos.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
replace the global state gpd_driver_priv with per-device private data
(struct gpd_fan_data) allocated in probe. This allows the driver to
support multiple instances in the future and aligns with kernel best
practices.
No functional change intended.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://lore.kernel.org/r/1cd3e13033fdd3d0f9b59322f7c86e350d113b92.1781055639.git.xiaopei01@kylinos.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
ADPM12250 is a quarter brick DC/DC Power Module. It is a high power
non-isolated converter capable of delivering regulated 12V with
continuous power level of 2500W. Uses PMBus.
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20260610-dev-adpm12250-v1-1-422760bb80da@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The INA238 family supports eight conversion time steps from 50 us to
4120 us (SQ52206: 66 us to 8230 us). At the millisecond granularity of
update_interval, the four shortest steps (50, 84, 150, 280 us) all
round to the same value and cannot be individually selected.
Add support for the generic update_interval_us attribute, which reports
and programs the same ADC cycle time as update_interval but in
microseconds, giving userspace full access to all conversion time steps.
Both attributes reflect the total cycle time including the active
averaging count: the reported value is the raw conversion time
multiplied by the number of averaged samples, and writes apply the
inverse mapping.
Signed-off-by: Ferdinand Schwenk <ferdinand.schwenk@advastore.com>
Link: https://lore.kernel.org/r/20260609-hwmon-ina238-update-interval-us-v2-v3-3-016b55567950@advastore.com
[groeck: Fixed some multi-line alignment issues]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Some hardware monitoring chips support update intervals below one
millisecond. The existing update_interval attribute uses millisecond
granularity, which causes sub-millisecond steps to round to the same
value and become inaccessible from userspace.
Introduce update_interval_us, a companion chip-level attribute that
expresses the same update interval in microseconds. Drivers
implementing this attribute should also implement update_interval for
compatibility with millisecond-based userspace interfaces.
Signed-off-by: Ferdinand Schwenk <ferdinand.schwenk@advastore.com>
Link: https://lore.kernel.org/r/20260609-hwmon-ina238-update-interval-us-v2-v3-2-016b55567950@advastore.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Expose INA238 ADC averaging count (AVG) and conversion timing
(VBUSCT/VSHCT/VTCT) through chip-level hwmon attributes:
chip/samples
chip/update_interval
Use per-chip conversion-time lookup tables so the same helpers work
for INA228/INA237/INA238/INA700/INA780 and SQ52206. Cache ADC_CONFIG
in driver data and update it on writes to avoid extra register reads
during read-modify-write updates.
Report update_interval in milliseconds as required by the hwmon ABI.
Compute it from raw ADC cycle time multiplied by the active averaging
count, and apply the inverse mapping on writes so programmed conversion
time tracks the selected sample count.
Clamp user-provided update_interval before unit scaling to prevent
overflow in arithmetic conversions.
Also combine chip attributes in HWMON_CHANNEL_INFO using a bitwise OR
for a single logical chip channel.
Signed-off-by: Ferdinand Schwenk <ferdinand.schwenk@advastore.com>
Link: https://lore.kernel.org/r/20260609-hwmon-ina238-update-interval-us-v2-v3-1-016b55567950@advastore.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Support the LTC4283 Hot Swap Controller. The device features programmable
current limit with foldback and independently adjustable inrush current to
optimize the MOSFET safe operating area (SOA). The SOA timer limits MOSFET
temperature rise for reliable protection against overstresses.
An I2C interface and onboard ADC allow monitoring of board current,
voltage, power, energy, and fault status.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20260502-ltc4283-support-v13-2-1c206542e652@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Adds support for the Infineon XDP730 Digital eFuse Controller by
updating the existing XDP720 driver.
Signed-off-by: Ashish Yadav <ashish.yadav@infineon.com>
Link: https://lore.kernel.org/r/20260609072231.15486-3-Ashish.Yadav@infineon.com
[groeck: Fixed conflicts in xdp720_id declaration]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add a PMBus driver for the Analog Devices MAX20860A step-down DC-DC
switching regulator. The MAX20860A provides monitoring of input/output
voltage, output current, and temperature via the PMBus interface using
linear data format. Optional regulator support is available via
CONFIG_SENSORS_MAX20860A_REGULATOR.
Signed-off-by: Syed Arif <arif.syed@hpe.com>
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260601184516.919488-3-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for BMR316, BMR321, BMR350 and BMR351 DC/DC converter
modules from Flex to the pmbus driver.
Signed-off-by: Daniel Nilsson <linux@erq.se>
Link: https://lore.kernel.org/r/20260603085712.659432-2-linux@erq.se
[groeck: Resolved conflicts (explicit struct members in pmbus_id)]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Named initializers are better readable and more robust to changes of the
struct definition. This robustness is relevant for a planned change to
struct platform_device_id replacing .driver_data by an anonymous unit.
While touching these arrays unify usage of commas.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/25d38df8db42d69f33fa30267c9fd5ea058223d0.1779894738.git.u.kleine-koenig@baylibre.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The driver explicitly set the .driver_data member of struct
platform_device_id to zero without relying on that value. Drop this
unused assignments.
While touching this array unify spacing and use named initializers for
.name.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/972c9998054c7944f63266819d6fb08b36edb5c5.1779894738.git.u.kleine-koenig@baylibre.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
set_fan() parses user input with kstrtol() and passes the resulting
value to FAN16_TO_REG() on chips with 16-bit fan support.
Negative fan speeds are not meaningful and should be rejected before
conversion. Worst scenario, one may be able to abuse undefined
behaviour of signed overflow to possibly induce rpm * 2 == 0 in
FAN16_TO_REG(), thus causing a division by zero.
Instead, clamp val < 0 to zero and keep the conversion in its valid
input domain, avoiding unsafe arithmetic in the register conversion
path.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 17d648bf57 ("it87: Add support for the IT8716F")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20260529141839.1639287-1-n.zhandarovich@fintech.ru
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add the ASRock Z890 Pro-A customer ID to the list of supported
boards for the NCT6683 hardware monitoring driver.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Signed-off-by: Reiner Pröls <reiner.proels@gmail.com>
Link: https://lore.kernel.org/r/20260521212632.223724-1-Reiner.Proels@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Since device_property_read_string() and similar functions defined in
linux/property.h are used in the driver add explicit include for
linux/mod_devicetable.h and linux/property.h rather than having implicit
inclusions.
Removed of_match_ptr() improving non-Device Tree compatibility of the
driver and drop unnecessary __maybe_unused.
Header linux/of.h can't be removed yet since macro is_of_node() is used.
Signed-off-by: Flaviu Nistor <flaviu.nistor@gmail.com>
Link: https://lore.kernel.org/r/20260522052352.12139-1-flaviu.nistor@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The driver caches the PWM frequency register and the CONFIG_FAN slow-clock
select bit, but never lets userspace pick a different output frequency.
Add a pwm1_freq sysfs attribute that selects the closest SCS + PFR
combination for the requested value in Hz, gated by manual mode like
set_pwm1(). PFR is clamped to 31 so that 2*PFR fits in the chip's 6-bit
PWM register (matching the existing scaling assumption in show_pwm1).
The hardware LUT hysteresis register is shared by all LUT entries, so
the per-point pwm1_auto_pointN_temp_hyst attributes can't be made RW
without N-to-1 cross-attribute side effects. Following the max31760
precedent, expose a single chip-wide pwm1_auto_point_temp_hyst attribute
holding the hysteresis amount in millidegrees; the per-point attributes
stay RO and continue to show the resulting absolute trip-down
temperature for each entry.
This was tested on a Linksys LGS328MPC switch hardware where the fan
would not spin with the default PWM Frequency, which is why this change
is required.
Signed-off-by: Jan-Henrik Bruhn <kernel@jhbruhn.de>
Link: https://lore.kernel.org/r/20260523133617.3439102-1-kernel@jhbruhn.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The driver seeds the chip's SET_RTC register once at probe with
ktime_get_real_seconds(). Over a long uptime the chip's internal
seconds counter drifts away from the host's wall-clock time, so the
timestamp embedded in each blackbox record stops being meaningful
in wall-clock terms. The datasheet recommends that the host
periodically resynchronise the counter to address this; today the
driver has no userspace-facing knob for that.
Expose SET_RTC via an rtc debugfs file alongside the other adm1266
debugfs entries:
read -- returns the chip's current SET_RTC seconds counter, so
userspace can observe how far the chip has drifted from
host wall-clock without writing anything.
write -- the kernel re-reads ktime_get_real_seconds() itself and
pushes it to the chip. The write payload is ignored;
userspace does not get to supply its own timestamp
value, so there is no way for it to push a wrong time
into the chip.
A small userspace agent (chrony hook, systemd-timesyncd dispatch
script, or a periodic cron job) can write to this file to keep the
chip's counter aligned with wall-clock across long uptimes.
Both the read and write paths take pmbus_lock to serialise against
the pmbus_core's own PAGE+register sequences and against the other
adm1266 debugfs accessors that already run under the same lock.
While at it, drop the now-redundant adm1266_set_rtc() probe-time
helper. The new adm1266_rtc_set() callback does exactly the same
byte-packing and write; probe just calls adm1266_rtc_set(client, 0)
(the ignored @val argument) after pmbus_do_probe() so the
pmbus_lock acquired by the new helper has a live mutex to take.
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Assisted-by: Claude-Code:claude-opus-4-7
Assisted-by: sashiko:gemini-3.1-pro-preview
Link: https://lore.kernel.org/r/20260520-adm1266-v5-3-c72ef1fac1ea@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The ADM1266 maintains a 16-bit non-volatile POWERUP_COUNTER register
(0xE4, datasheet Rev. D, Table 93) that increments on every power
cycle and cannot be reset by the host. Each blackbox record already
embeds the counter at record time, so the standalone live value is
primarily useful for matching a captured record back to the boot it
came from when correlating logs.
Expose it as a read-only debugfs file alongside sequencer_state. The
block-read returns two payload bytes in little-endian order.
Take pmbus_lock around the block-read so the access serialises with
any pmbus_core sequence that sets PAGE on the device. Without it, a
PAGE write from another thread could interleave between a PAGE set
and a paged read elsewhere in the driver and corrupt either side's
view of the device state machine.
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Assisted-by: Claude-Code:claude-opus-4-7
Assisted-by: sashiko:gemini-3.1-pro-preview
Link: https://lore.kernel.org/r/20260520-adm1266-v5-2-c72ef1fac1ea@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The ADM1266 blackbox can be configured in two recording modes via
BLACKBOX_CONFIG[0]: cyclic, where the device overwrites the oldest
record once the 32-record buffer fills, and single, where it stops
recording until the buffer is cleared. Deployments that need to
preserve the full record history across multiple fault episodes
typically run in single mode and need a way to clear the buffer
after the records have been collected.
Expose a write-only debugfs file alongside sequencer_state. Writing
any data to it issues the documented clear-blackbox sub-command:
a 2-byte block-write to READ_BLACKBOX (0xDE) with payload
{0xFE, 0x00} (datasheet Rev. D).
The clear is taken under pmbus_lock because READ_BLACKBOX is also
used by adm1266_nvmem_read_blackbox() to walk records one at a
time; both paths run under pmbus_lock so the clear cannot
interleave mid-iteration and corrupt the read sequence.
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Assisted-by: Claude-Code:claude-opus-4-7
Assisted-by: sashiko:gemini-3.1-pro-preview
Link: https://lore.kernel.org/r/20260520-adm1266-v5-1-c72ef1fac1ea@nexthop.ai
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The delayed polling work rearms itself from the work function, so use
explicit delayed-work setup and cleanup instead of
devm_delayed_work_autocancel().
Initialize the delayed work with INIT_DELAYED_WORK() and register a
devres cleanup action that calls disable_delayed_work_sync() during
teardown.
This addresses the concern raised during review about the polling work
being able to requeue itself while the driver is being removed.
Signed-off-by: Shubham Chakraborty <chakrabortyshubham66@gmail.com>
Link: https://lore.kernel.org/r/20260517080445.103962-4-chakrabortyshubham66@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Extend the raspberrypi-hwmon driver to expose firmware-provided
voltage measurements through the hwmon subsystem.
The driver now exports the following voltage inputs:
- in0_input (core)
- in1_input (sdram_c)
- in2_input (sdram_i)
- in3_input (sdram_p)
Voltage values returned by firmware are converted from microvolts
to millivolts as expected by the hwmon subsystem.
Update the documentation related to it.
The existing undervoltage sticky alarm handling is preserved and
associated with the first voltage channel.
Tested in -
- Raspberry Pi 3b+ (Linux raspberrypi 6.12.75+rpt-rpi-v8 #1 SMP PREEMPT
Debian 1:6.12.75-1+rpt1 (2026-03-11) aarch64 GNU/Linux)
Signed-off-by: Shubham Chakraborty <chakrabortyshubham66@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20260517080445.103962-3-chakrabortyshubham66@gmail.com
[groeck: Added missing empty line after declaration]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Since device_property_read_string() is used in the probe function add
explicit include for linux/mod_devicetable.h and linux/property.h rather
than having implicit inclusions. Header linux/of.h can be removed and
also of_match_ptr() improving non-Device Tree compatibility of the driver.
Remove __maybe_unuse because it is not needed anymore.
Signed-off-by: Flaviu Nistor <flaviu.nistor@gmail.com>
Link: https://lore.kernel.org/r/20260518072337.4918-1-flaviu.nistor@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use scoped_guard() instead of hwmon_lock() / hwmon_unlock() to acquire
and release the hardware monitoring subsystem lock.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use scoped_guard() instead of hwmon_lock() / hwmon_unlock() to acquire
and release the hardware monitoring subsystem lock.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use guard() and scoped_guard() instead of hwmon_lock() / hwmon_unlock()
to acquire and release the hardware monitoring subsystem lock.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The hardcoded maximum of 512 cores per package was first defined by commit
34cf8c657c ("hwmon: (coretemp) Enlarge per package core count limit")
and later kept as a fallback with a TODO in commit 1a793caf6f ("hwmon:
(coretemp) Use dynamic allocated memory for core temp_data") because the
actual per-package core count was not reliably available at the time.
Now that topology_num_cores_per_package() is stable and suitable for use,
it's time to complete the TODO and allocate only the needed amount of
memory for core_data.
Signed-off-by: Roman Bakshansky <bakshansky.lists@gmail.com>
Link: https://lore.kernel.org/r/20260516114253.5466-2-bakshansky.lists@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The ADM1266 reports its firmware revision via the IC_DEVICE_REV
manufacturer-specific block-read command (0xAE, datasheet Rev. D
Table 80). The first three returned bytes are the firmware
major.minor.patch fields. This is useful when correlating field
behaviour against ADI release notes; expose it through debugfs
alongside the existing sequencer_state entry.
The standard PMBus MFR_REVISION (0x9B) register is already exposed
by pmbus_core's debugfs auto-create path and reports the
manufacturer revision, which is a separate thing from the firmware
running on the device.
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://lore.kernel.org/r/20260512-adm1266-v3-1-a81a479b0bb0@nexthop.ai
[groeck: Squashed patch adding serialization with pmbus_lock]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The nct7802 chip exposes two registers that allow setting the time
interval between successive duty increases or decreases in Smart Fan
mode. The units are intervals of 0.1 second. The default value at power
on is 10, so 1 second.
Add sysfs attributes for step_up_time and step_down_time to allow
controlling the responsiveness of the fan speed. Values are represented
as milliseconds to the user. When set, the value is clamped to the valid
range of 100 to 25500 (0.1 to 25.5 seconds), and rounded to the nearest
multiple of 100.
Signed-off-by: Ronan Dalton <ronan.dalton@alliedtelesis.co.nz>
Cc: linux-kernel@vger.kernel.org
Cc: linux-hwmon@vger.kernel.org
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20260514003404.1548747-2-ronan.dalton@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
