Here are a bunch of USB and Thunderbolt fixes (most all are USB) for
7.0-rc7. More than I normally like this late in the release cycle,
partly due to my recent travels, and partly due to people banging away
on the USB gadget interfaces and apis more than normal (big shoutout to
Android for getting the vendors to actually work upstream on this,
that's a huge win overall for everyone here.)
Included in here are:
- Small thunderbolt fix
- new USB serial driver ids added
- typec driver fixes
- gadget driver fixes for some disconnect issues
- other usb gadget driver fixes for reported problems with binding and
unbinding devices as happens when a gadget device connects /
disconnects from a system it is plugged into (or it switches device
mode at a user's request, these things are complex little beasts...)
- usb offload fixes (where USB audio tunnels through the controller
while the main CPU is asleep) for when EMP spikes hit the system
causing disconnects to happen (as often happens with static
electricity in the winter months). This has been much reported by
at least one vendor, and resolves the issues they have been seeing
with this codepath. Can't wait for the "formal methods are the
answer!" people to try to model that one properly...
- Other small usb driver fixes for issues reported.
All of these have been in linux-next this week, and before, with no
reported issues, and I've personally been stressing these harder than
normal on my systems here with no problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCadIdow8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylTVQCfYg21ERvg753HnW1zbnzjMFlJZTQAoL+/0zeH
VcNijzt/8uiEKvQWAhcB
=BcZf
-----END PGP SIGNATURE-----
Merge tag 'usb-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are a bunch of USB and Thunderbolt fixes (most all are USB) for
7.0-rc7. More than I normally like this late in the release cycle,
partly due to my recent travels, and partly due to people banging away
on the USB gadget interfaces and apis more than normal (big shoutout
to Android for getting the vendors to actually work upstream on this,
that's a huge win overall for everyone here)
Included in here are:
- Small thunderbolt fix
- new USB serial driver ids added
- typec driver fixes
- gadget driver fixes for some disconnect issues
- other usb gadget driver fixes for reported problems with binding
and unbinding devices as happens when a gadget device connects /
disconnects from a system it is plugged into (or it switches device
mode at a user's request, these things are complex little
beasts...)
- usb offload fixes (where USB audio tunnels through the controller
while the main CPU is asleep) for when EMP spikes hit the system
causing disconnects to happen (as often happens with static
electricity in the winter months). This has been much reported by
at least one vendor, and resolves the issues they have been seeing
with this codepath. Can't wait for the "formal methods are the
answer!" people to try to model that one properly...
- Other small usb driver fixes for issues reported.
All of these have been in linux-next this week, and before, with no
reported issues, and I've personally been stressing these harder than
normal on my systems here with no problems"
* tag 'usb-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits)
usb: gadget: f_hid: move list and spinlock inits from bind to alloc
usb: host: xhci-sideband: delegate offload_usage tracking to class drivers
usb: core: use dedicated spinlock for offload state
usb: cdns3: gadget: fix state inconsistency on gadget init failure
usb: dwc3: imx8mp: fix memory leak on probe failure path
usb: gadget: f_uac1_legacy: validate control request size
usb: ulpi: fix double free in ulpi_register_interface() error path
usb: misc: usbio: Fix URB memory leak on submit failure
USB: core: add NO_LPM quirk for Razer Kiyo Pro webcam
usb: cdns3: gadget: fix NULL pointer dereference in ep_queue
usb: core: phy: avoid double use of 'usb3-phy'
USB: serial: option: add MeiG Smart SRM825WN
usb: gadget: f_rndis: Fix net_device lifecycle with device_move
usb: gadget: f_subset: Fix net_device lifecycle with device_move
usb: gadget: f_eem: Fix net_device lifecycle with device_move
usb: gadget: f_ecm: Fix net_device lifecycle with device_move
usb: gadget: u_ncm: Add kernel-doc comments for struct f_ncm_opts
usb: gadget: f_rndis: Protect RNDIS options with mutex
usb: gadget: f_subset: Fix unbalanced refcnt in geth_free
dt-bindings: connector: add pd-disable dependency
...
Remove usb_offload_get() and usb_offload_put() from the xHCI sideband
interrupter creation and removal paths.
The responsibility of manipulating offload_usage now lies entirely with
the USB class drivers. They have the precise context of when an offload
data stream actually starts and stops, ensuring a much more accurate
representation of offload activity for power management.
Cc: stable <stable@kernel.org>
Fixes: ef82a4803a ("xhci: sideband: add api to trace sideband usage")
Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Tested-by: Hailong Liu <hailong.liu@oppo.com>
Tested-by: hailong.liu@oppo.com
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260401123238.3790062-3-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Same issue that the Scarlett 2i2 1st Gen had:
QUIRK_FLAG_SKIP_IFACE_SETUP causes distorted audio on the
Scarlett Solo 1st Gen (1235:801c).
Fixes: 38c322068a ("ALSA: usb-audio: Add QUIRK_FLAG_SKIP_IFACE_SETUP")
Reported-by: Dag Smedberg <dag@dsmedberg.se>
Tested-by: Dag Smedberg <dag@dsmedberg.se>
Signed-off-by: Dag Smedberg <dag@dsmedberg.se>
Link: https://patch.msgid.link/20260329170420.4122-1-dag@dsmedberg.se
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The loop creates a whitespace-stripped copy of the card shortname
where `len < sizeof(card->id)` is used for the bounds check. Since
sizeof(card->id) is 16 and the local id buffer is also 16 bytes,
writing 16 non-space characters fills the entire buffer,
overwriting the terminating nullbyte.
When this non-null-terminated string is later passed to
snd_card_set_id() -> copy_valid_id_string(), the function scans
forward with `while (*nid && ...)` and reads past the end of the
stack buffer, reading the contents of the stack.
A USB device with a product name containing many non-ASCII, non-space
characters (e.g. multibyte UTF-8) will reliably trigger this as follows:
BUG: KASAN: stack-out-of-bounds in copy_valid_id_string
sound/core/init.c:696 [inline]
BUG: KASAN: stack-out-of-bounds in snd_card_set_id_no_lock+0x698/0x74c
sound/core/init.c:718
The off-by-one has been present since commit bafeee5b1f ("ALSA:
snd_usb_caiaq: give better shortname") from June 2009 (v2.6.31-rc1),
which first introduced this whitespace-stripping loop. The original
code never accounted for the null terminator when bounding the copy.
Fix this by changing the loop bound to `sizeof(card->id) - 1`,
ensuring at least one byte remains as the null terminator.
Fixes: bafeee5b1f ("ALSA: snd_usb_caiaq: give better shortname")
Cc: stable@vger.kernel.org
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Reported-by: Berk Cem Goksel <berkcgoksel@gmail.com>
Signed-off-by: Berk Cem Goksel <berkcgoksel@gmail.com>
Link: https://patch.msgid.link/20260329133825.581585-1-berkcgoksel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The NeuralDSP Quad Cortex does not support DSD playback. We need
this product-specific entry with zero quirks because otherwise it
falls through to the vendor-specific entry which marks it as
supporting DSD playback.
Cc: Yue Wang <yuleopen@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Phil Willoughby <willerz@gmail.com>
Link: https://patch.msgid.link/20260328080921.3310-1-willerz@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: new full-speed USB device number 2 using xhci-hcd
usb 1-1: New USB device found, idVendor=001f, idProduct=0b23
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AB17X USB Audio
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20241228172028
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/PUZPR06MB6224CA59AD2B26054120B276D249A@PUZPR06MB6224.apcprd06.prod.outlook.com
The Focusrite Scarlett 2i2 1st Gen (1235:8006) produces
distorted/silent audio when QUIRK_FLAG_SKIP_IFACE_SETUP is active, as
that flag causes the feedback format to be detected as 17.15 instead
of 16.16.
Add a DEVICE_FLG entry for this device before the Focusrite VENDOR_FLG
entry so that it gets no quirk flags, overriding the vendor-wide
SKIP_IFACE_SETUP. This device doesn't have the internal mixer, Air, or
Safe modes that the quirk was designed to protect.
Fixes: 38c322068a ("ALSA: usb-audio: Add QUIRK_FLAG_SKIP_IFACE_SETUP")
Reported-by: pairomaniac [https://github.com/geoffreybennett/linux-fcp/issues/54]
Tested-by: pairomaniac [https://github.com/geoffreybennett/linux-fcp/issues/54]
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/abmsTjKmQMKbhYtK@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: New USB device found, idVendor=0666, idProduct=0880
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: USB Audio
usb 1-1: Manufacturer: SPACETOUCH
usb 1-1: SerialNumber: 000000000
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB6217ACC80B70BE25D87456B0D247A@TYUPR06MB6217.apcprd06.prod.outlook.com
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Similarly, USB core holds a reference to all interfaces in the active
configuration so there is no need for a driver to take a reference to a
sibling interface only to release it at disconnect either.
Drop the redundant references to reduce cargo culting, make it easier to
spot drivers where extra references are needed, and reduce the risk of
memory leaks when drivers fail to release them.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305111810.18688-1-johan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: New USB device found, idVendor=0624, idProduct=3d3f
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AB13X USB Audio
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20210726905926
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB621795D087BF2D594027C235D273A@TYUPR06MB6217.apcprd06.prod.outlook.com
We don't process this driver code for kernel-doc, and the "/**" marker
leads to warnings with W=1 builds. Drop the superfluous markers, and
also fix the invalid mark up, too.
Link: https://patch.msgid.link/20260226155456.1092186-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At fixing the memory leak of xfer buffer, we forgot to update the
corresponding comment, too. This resulted in a kernel-doc warning
with W=1. Let's correct it.
Fixes: 5c7ef50012 ("ALSA: qc_audio_offload: avoid leaking xfer_buf allocation")
Link: https://patch.msgid.link/20260226154414.1081568-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We don't process USB-audio driver code for kernel-doc, and the "/**"
marker leads to warnings with W=1 builds. Drop the superfluous
markers.
Link: https://patch.msgid.link/20260226154414.1081568-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The entry of the validators table for UAC3 AC header descriptor is
defined with the wrong protocol version UAC_VERSION_2, while it should
have been UAC_VERSION_3. This results in the validator never matching
for actual UAC3 devices (protocol == UAC_VERSION_3), causing their
header descriptors to bypass validation entirely. A malicious USB
device presenting a truncated UAC3 header could exploit this to cause
out-of-bounds reads when the driver later accesses unvalidated
descriptor fields.
The bug was introduced in the same commit as the recently fixed UAC3
feature unit sub-type typo, and appears to be from the same copy-paste
error when the UAC3 section was created from the UAC2 section.
Fixes: 57f8770620 ("ALSA: usb-audio: More validations of descriptor units")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jun Seo <jun.seo.93@proton.me>
Link: https://patch.msgid.link/20260226010820.36529-1-jun.seo.93@proton.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace the remaining with inclusive terms; it's only this function
name we overlooked at the previous conversion.
Fixes: 53837b4ac2 ("ALSA: usb-audio: Replace slave/master terms")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260225085233.316306-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although DIYINHK USB Audio 2.0 (ID 20b1:2009) shows the implicit
feedback source for the capture stream, this would cause several
problems for the playback. Namely, the device can get wMaxPackSize
1024 for 24/32 bit format with 6 channels, and when a high sample rate
like 352.8kHz or 384kHz is played, the packet size overflows the max
limit. Also, the device has another two playback altsets, and those
aren't properly handled with the implicit feedback.
Since the device has been working well even before introducing the
implicit feedback, we can assume that it works fine in the async mode.
This patch adds the explicit skip of the implicit fb detection to make
the playback running in the async mode.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221076
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260225085233.316306-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the packet sizes are taken from the capture stream in the
implicit feedback mode, the sizes might be larger than the upper
boundary defined by the descriptor. As already done for other
transfer modes, we have to cap the sizes accordingly at sending,
otherwise this would lead to an error in USB core at submission of
URBs.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221076
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260225085233.316306-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We calculate the possible packet sizes beforehand for adaptive and
synchronous endpoints, but we didn't take care of the max frame size
for those pre-calculated values. When a device or a bus limits the
packet size, a high sample rate or a high number of channels may lead
to the packet sizes that are larger than the given limit, which
results in an error from the USB core at submitting URBs.
As a simple workaround, just add the sanity checks of pre-calculated
packet sizes to have the upper boundary of ep->maxframesize.
Fixes: f0bd62b640 ("ALSA: usb-audio: Improve frames size computation")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221076
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260225085233.316306-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add QUIRK_FLAG_SKIP_CLOCK_SELECTOR for Focusrite devices.
During interface parsing, snd_usb_clock_find_source() reads the clock
selector value then writes it back unchanged. On Focusrite devices
this redundant write results in a ~300ms delay per altsetting, adding
~1.8s to probe time on a typical device with 6 altsettings.
Enabling SKIP_CLOCK_SELECTOR skips the redundant write-back.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/00e53ae0a508b41516b41833daa17823381a649c.1771594828.git.g@b4.vu
Add a quirk flag to skip the usb_set_interface(),
snd_usb_init_pitch(), and snd_usb_init_sample_rate() calls in
__snd_usb_parse_audio_interface(). These are redundant with
snd_usb_endpoint_prepare() at stream-open time.
Enable the quirk for Focusrite devices, as init_sample_rate(rate_max)
sets 192kHz during probing, which disables the internal mixer and Air
and Safe modes.
Fixes: 16f1f83844 ("Revert "ALSA: usb-audio: Drop superfluous interface setup at parsing"")
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/65a7909b15f9feb76c2a6f4f8814c240ddc50737.1771594828.git.g@b4.vu
Remove QUIRK_FLAG_VALIDATE_RATES for Focusrite. With the previous
commit, focusrite_valid_sample_rate() produces correct rate tables
without USB probing.
QUIRK_FLAG_VALIDATE_RATES sends SET_CUR requests for each rate (~25ms
each) and leaves the device at 192kHz. This is a problem because that
rate: 1) disables the internal mixer, so outputs are silent until an
application opens the PCM and sets a lower rate, and 2) the Air and
Safe modes get disabled.
Fixes: 5963e52621 ("ALSA: usb-audio: Enable rate validation for Scarlett devices")
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/09b9c012024c998c4ca14bd876ef0dce0d0b6101.1771594828.git.g@b4.vu
Replace the bLength == 10 max_rate check in
focusrite_valid_sample_rate() with filtering that also examines the
bmControls VAL_ALT_SETTINGS bit.
When VAL_ALT_SETTINGS is readable, the device uses strict
per-altsetting rate filtering (only the highest rate pair for that
altsetting is valid). When it is not readable, all rates up to
max_rate are valid.
For devices without the bLength == 10 Format Type descriptor extension
but with VAL_ALT_SETTINGS readable and multiple altsettings (only seen
in Scarlett 18i8 3rd Gen playback), fall back to the Focusrite
convention: alt 1 = 48kHz, alt 2 = 96kHz, alt 3 = 192kHz.
This produces correct rate tables for all tested Focusrite devices
(all Scarlett 2nd, 3rd, and 4th Gen, Clarett+, and Vocaster) using
only USB descriptors, allowing QUIRK_FLAG_VALIDATE_RATES to be removed
for Focusrite in the next commit.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/7e18c1f393a6ecb6fc75dd867a2c4dbe135e3e22.1771594828.git.g@b4.vu
scarlett2_add_dsp_ctls() was incorrectly storing the precomp and PEQ
filter coefficient control pointers into the precomp_flt_switch_ctls
and peq_flt_switch_ctls arrays instead of the intended targets
precomp_flt_ctls and peq_flt_ctls. Pass NULL instead, as the filter
coefficient control pointers are not used, and remove the unused
precomp_flt_ctls and peq_flt_ctls arrays from struct scarlett2_data.
Additionally, scarlett2_update_filter_values() was reading
dsp_input_count * peq_flt_count values for
SCARLETT2_CONFIG_PEQ_FLT_SWITCH, but the peq_flt_switch array is
indexed only by dsp_input_count (one switch per DSP input, not per
filter). Fix the read count.
Fixes: b64678eb4e ("ALSA: scarlett2: Add DSP controls")
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/86497b71db060677d97c38a6ce5f89bb3b25361b.1771581197.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
here are a bunch of updates, but there should be no big surprises;
mostly device-specific quirks and fix-ups or non-code changes.
- Quirks for ASoC AMD, HD-audio and USB-audio
- Fixes in ASoC fsl, rockchip, renesas, aw codecs
- Fixes for USB-audio packet handling in the implicit feedback mode
- Updates of SPDX license IDs in some files
-----BEGIN PGP SIGNATURE-----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=01P5
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are a bunch of updates, but there should be no big surprises;
mostly device-specific quirks and fix-ups or non-code changes:
- Quirks for ASoC AMD, HD-audio and USB-audio
- Fixes in ASoC fsl, rockchip, renesas, aw codecs
- Fixes for USB-audio packet handling in the implicit feedback mode
- Updates of SPDX license IDs in some files"
* tag 'sound-fix-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits)
ASoC: rockchip: i2s-tdm: Use param rate if not provided by set_sysclk
ALSA: hda/hdmi: Add quirk for TUXEDO IBS14G6
ASoC: dt-bindings: asahi-kasei,ak5558: Fix the supply names
ASoC: dt-bindings: asahi-kasei,ak4458: Fix the supply names
ASoC: dt-bindings: asahi-kasei,ak4458: set unevaluatedProperties:false
ASoC: amd: amd_sdw: add machine driver quirk for Lenovo models
ASoC: amd: acp: Add ACP7.0 match entries for Realtek parts
ALSA: echoaudio: Add SPDX ids to some files
ALSA: isa: Add SPDX id lines to some files
ALSA: core: Add SPDX license id to files
ASoC: tas2783A: add explicit port prepare handling
ASoC: renesas: rz-ssi: Fix playback and capture
ALSA: hda/realtek: Fix headset mic on ASUS Zenbook 14 UX3405MA
ALSA: hda/conexant: Fix headphone jack handling on Acer Swift SF314
ASoC: qcom: sm8250: Add quinary MI2S support
ASoC: amd: yc: Add DMI quirk for ASUS Vivobook Pro 15X M6501RR
ALSA: usb-audio: Avoid potentially repeated XRUN error messages
ALSA: usb-audio: Add sanity check for OOB writes at silencing
ALSA: usb-audio: Optimize the copy of packet sizes for implicit fb handling
ALSA: usb-audio: Update the number of packets properly at receiving
...
Some XRUN-related error messages may repeat themselves, because there
can be multiple pending packets. Modify notify_xrun() function to
return whether it's being stopped or not, and show the error message
only once when the XRUN is actually handled.
Along with it, fix a typo of word package to packet in the error
message.
Link: https://patch.msgid.link/20260216141209.1849200-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At silencing the playback URB packets in the implicit fb mode before
the actual playback, we blindly assume that the received packets fit
with the buffer size. But when the setup in the capture stream
differs from the playback stream (e.g. due to the USB core limitation
of max packet size), such an inconsistency may lead to OOB writes to
the buffer, resulting in a crash.
For addressing it, add a sanity check of the transfer buffer size at
prepare_silent_urb(), and stop the data copy if the received data
overflows. Also, report back the transfer error properly from there,
too.
Note that this doesn't fix the root cause of the playback error
itself, but this merely covers the kernel Oops.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221076
Link: https://patch.msgid.link/20260216141209.1849200-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We did manual copies over loop for the packet data update of the
implicit feedback, but this can be optimized with a simple memcpy().
Along with it, change the data type of snd_usb_packet_info struct to
align with other (from uint32_t to int).
No functional changes but only code optimizations.
Link: https://patch.msgid.link/20260216141209.1849200-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At receiving the packets from the implicit feedback source, we didn't
update ctx->packets field but only the ctx->packet_size[] data.
In exceptional cases, this might lead to unexpectedly superfluous data
transfer (although this won't happen usually due to the nature of USB
isochronous transfer). Fix it to update the field properly.
Link: https://patch.msgid.link/20260216141209.1849200-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Total patches: 107
Reviews/patch: 1.07
Reviewed rate: 67%
- The 2 patch series "ocfs2: give ocfs2 the ability to reclaim
suballocator free bg" from Heming Zhao saves disk space by teaching
ocfs2 to reclaim suballocator block group space.
- The 4 patch series "Add ARRAY_END(), and use it to fix off-by-one
bugs" from Alejandro Colomar adds the ARRAY_END() macro and uses it in
various places.
- The 2 patch series "vmcoreinfo: support VMCOREINFO_BYTES larger than
PAGE_SIZE" from Pnina Feder makes the vmcore code future-safe, if
VMCOREINFO_BYTES ever exceeds the page size.
- The 7 patch series "kallsyms: Prevent invalid access when showing
module buildid" from Petr Mladek cleans up kallsyms code related to
module buildid and fixes an invalid access crash when printing
backtraces.
- The 3 patch series "Address page fault in
ima_restore_measurement_list()" from Harshit Mogalapalli fixes a
kexec-related crash that can occur when booting the second-stage kernel
on x86.
- The 6 patch series "kho: ABI headers and Documentation updates" from
Mike Rapoport updates the kexec handover ABI documentation.
- The 4 patch series "Align atomic storage" from Finn Thain adds the
__aligned attribute to atomic_t and atomic64_t definitions to get
natural alignment of both types on csky, m68k, microblaze, nios2,
openrisc and sh.
- The 2 patch series "kho: clean up page initialization logic" from
Pratyush Yadav simplifies the page initialization logic in
kho_restore_page().
- The 6 patch series "Unload linux/kernel.h" from Yury Norov moves
several things out of kernel.h and into more appropriate places.
- The 7 patch series "don't abuse task_struct.group_leader" from Oleg
Nesterov removes the usage of ->group_leader when it is "obviously
unnecessary".
- The 5 patch series "list private v2 & luo flb" from Pasha Tatashin
adds some infrastructure improvements to the live update orchestrator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY4giAAKCRDdBJ7gKXxA
jgusAQDnKkP8UWTqXPC1jI+OrDJGU5ciAx8lzLeBVqMKzoYk9AD/TlhT2Nlx+Ef6
0HCUHUD0FMvAw/7/Dfc6ZKxwBEIxyww=
=mmsH
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: New USB device found, idVendor=0020, idProduct=0b21
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: GHW-123P
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20210726905926
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB62176831E47899AB98902012D260A@TYUPR06MB6217.apcprd06.prod.outlook.com
Vendor ID 0x0661 is assigned to Hamamatsu Photonics K.K.,
but is used by iBasso for iBasso DC04U (0x0661:0x0883),
which supports native DSD playback.
This patch adds QUIRK_FLAG_DSD_RAW for iBasso DC04U, enabling
native DSD playback (DSD_U32_BE). The change has been verified
on Arch Linux using mpd and pw-cat.
Signed-off-by: Qihang Guo <v-conet@outlook.com>
Link: https://patch.msgid.link/TYYPR01MB14098529E0BD900921BE6F42CF465A@TYYPR01MB14098.jpnprd01.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: New USB device found, idVendor=001f, idProduct=0b21
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AB13X USB Audio
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20210926172016
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Link: https://patch.msgid.link/TYUPR06MB6217522D0DB6E2C9DF46B56ED265A@TYUPR06MB6217.apcprd06.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the support for the Sound Blaster X-Fi Surround 5.1 Pro was added,
the existing logic for the X-Fi Surround 5.1 in snd_audigy2nx_led_put()
was broken due to missing *else* before the added *if*: snd_usb_ctl_msg()
became incorrectly called twice and an error from first snd_usb_ctl_msg()
call ignored. As the added snd_usb_ctl_msg() call was totally identical
to the existing one for the "plain" X-Fi Surround 5.1, just merge those
two *if* statements while fixing the broken logic...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: 7cdd8d7313 ("ALSA: usb-audio - Add support for USB X-Fi S51 Pro")
Signed-off-by: Sergey Shtylyov <s.shtylyov@auroraos.dev>
Link: https://patch.msgid.link/20260203161558.18680-1-s.shtylyov@auroraos.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add mixer control support for the Focusrite Forte (USB ID 0x1235:0x8010),
an older USB audio interface that predates the Scarlett 2nd generation.
The Forte uses UAC2_CS_MEM (bRequest=0x03) for its input controls rather
than the standard UAC2_CS_CUR (0x01) used by Scarlett devices. This patch
adds Forte-specific control handlers that use the correct USB protocol.
Features implemented:
- Input source selection (Mic/Line/Inst) for both channels
- High pass filter switch
- 48V phantom power switch
- Phase invert switch
- Pad switch
- Preamp gain control (0-42 range, ~0-75dB)
- Matrix mixer controls (6 inputs x 4 outputs)
- Output volume and mute controls
The device is registered via mixer_quirks.c and uses the existing
mixer_scarlett.c infrastructure with Forte-specific additions.
Credit: This work builds on prior reverse-engineering by alastair-dm.
Link: https://github.com/alastair-dm/forte-mixer/wiki
Link: https://github.com/alastair-dm/forte-mixer
Link: https://github.com/jopdorp/forte-mixer
Signed-off-by: Jegor van Opdorp <jegorvanopdorp@gmail.com>
Link: https://patch.msgid.link/20260127081541.219669-1-jegorvanopdorp@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent fix commit for addressing the OOB access of PCM URB data
buffer caused a regression on Behringer UMC2020HD device, resulting in
choppy sound. The fix used ep->max_urb_frames for the upper limit
check, and this is no right value to be referred.
Use the actual buffer size (ctx->buffer_size) as the upper limit
instead, which also avoids the regression on the device above.
Fixes: ef5749ef8b ("ALSA: usb-audio: Prevent excessive number of frames")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220997
Link: https://patch.msgid.link/20260121082025.718748-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.
Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.
This change has been build-tested with allmodconfig on most ARCHes. Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).
Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When snd_usb_create_mixer() fails, snd_usb_mixer_free() frees
mixer->id_elems but the controls already added to the card still
reference the freed memory. Later when snd_card_register() runs,
the OSS mixer layer calls their callbacks and hits a use-after-free read.
Call trace:
get_ctl_value+0x63f/0x820 sound/usb/mixer.c:411
get_min_max_with_quirks.isra.0+0x240/0x1f40 sound/usb/mixer.c:1241
mixer_ctl_feature_info+0x26b/0x490 sound/usb/mixer.c:1381
snd_mixer_oss_build_test+0x174/0x3a0 sound/core/oss/mixer_oss.c:887
...
snd_card_register+0x4ed/0x6d0 sound/core/init.c:923
usb_audio_probe+0x5ef/0x2a90 sound/usb/card.c:1025
Fix by calling snd_ctl_remove() for all mixer controls before freeing
id_elems. We save the next pointer first because snd_ctl_remove()
frees the current element.
Fixes: 6639b6c236 ("[ALSA] usb-audio - add mixer control notifications")
Cc: stable@vger.kernel.org
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Berk Cem Goksel <berkcgoksel@gmail.com>
Link: https://patch.msgid.link/20260120102855.7300-1-berkcgoksel@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Audio control requests that sets sampling frequency sometimes fail on
this card. Adding delay between control messages eliminates that problem.
usb 1-1: New USB device found, idVendor=2fc6, idProduct=f06b
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: MOONDROP Moonriver2 Ti
usb 1-1: Manufacturer: MOONDROP
usb 1-1: SerialNumber: MOONDROP Moonriver2 Ti
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Reviewed-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB6217911EFC7E9224935FA507D28DA@TYUPR06MB6217.apcprd06.prod.outlook.com
The scarlett2_usb_get_config() function has a logic error in the
endianness conversion code that can cause buffer overflows when
count > 1.
The code checks `if (size == 2)` where `size` is the total buffer size in
bytes, then loops `count` times treating each element as u16 (2 bytes).
This causes the loop to access `count * 2` bytes when the buffer only
has `size` bytes allocated.
Fix by checking the element size (config_item->size) instead of the
total buffer size. This ensures the endianness conversion matches the
actual element type.
Fixes: ac34df733d ("ALSA: usb-audio: scarlett2: Update get_config to do endian conversion")
Cc: stable@vger.kernel.org
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Link: https://patch.msgid.link/20260117012706.1715574-1-samasth.norway.ananda@oracle.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
