On the Asus PRIME X670E-PRO WIFI, the driver reports a constant value of
zero for T_Sensor. On this board, the register for T_Sensor is at a
different address, as found by experimentation and confirmed by
comparison to an independent temperature reading.
* sensor disconnected: -62.0°C
* ambient temperature: +22.0°C
* held between fingers: +30.0°C
Introduce SENSOR_TEMP_T_SENSOR_ALT1 to support the PRIME X670E-PRO WIFI
without causing a regression for other 600-series boards
Fixes: e0444758dd ("hwmon: (asus-ec-sensors) add PRIME X670E-PRO WIFI")
Signed-off-by: Corey Hickey <bugfood-c@fatooh.org>
Link: https://lore.kernel.org/r/20260331215414.368785-1-bugfood-ml@fatooh.org
[groeck: Fixed typo, updated Fixes: reference]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In occ_show_extended() case 0, when the EXTN_FLAG_SENSOR_ID flag
is set, the sysfs_emit format string "%u" is missing the trailing
newline that the sysfs ABI expects. The else branch correctly uses
"%4phN\n", and all other show functions in this file include the
trailing newline.
Add the missing "\n" for consistency and correct sysfs output.
Fixes: c10e753d43 ("hwmon (occ): Add sensor types and versions")
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260326224510.294619-3-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In occ_show_power_1() case 1, the accumulator is divided by
update_tag without checking for zero. If no samples have been
collected yet (e.g. during early boot when the sensor block is
included but hasn't been updated), update_tag is zero, causing
a kernel divide-by-zero crash.
The 2019 fix in commit 211186cae1 ("hwmon: (occ) Fix division by
zero issue") only addressed occ_get_powr_avg() used by
occ_show_power_2() and occ_show_power_a0(). This separate code
path in occ_show_power_1() was missed.
Fix this by reusing the existing occ_get_powr_avg() helper, which
already handles the zero-sample case and uses mul_u64_u32_div()
to multiply before dividing for better precision. Move the helper
above occ_show_power_1() so it is visible at the call site.
Fixes: c10e753d43 ("hwmon (occ): Add sensor types and versions")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260326224510.294619-2-sanman.pradhan@hpe.com
[groeck: Fix alignment problems reported by checkpatch]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
tps53676_identify() uses strncmp() to compare the device ID buffer
against a byte sequence containing embedded non-printable bytes
(\x53\x67\x60). strncmp() is semantically wrong for binary data
comparison; use memcmp() instead.
Additionally, the buffer from i2c_smbus_read_block_data() is not
NUL-terminated, so printing it with "%s" in the error path is
undefined behavior and may read past the buffer. Use "%*ph" to
hex-dump the actual bytes returned.
Per the datasheet, the expected device ID is the 6-byte sequence
54 49 53 67 60 00 ("TI\x53\x67\x60\x00"), so compare all 6 bytes
including the trailing NUL.
Fixes: cb3d37b590 ("hwmon: (pmbus/tps53679) Add support for TI TPS53676")
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260330155618.77403-1-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
ltc4286.c uses PMBus core symbols exported in the PMBUS namespace,
such as pmbus_do_probe(), but does not declare MODULE_IMPORT_NS("PMBUS").
Add the missing namespace import to avoid modpost warnings.
Fixes: 0c459759ca ("hwmon: (pmbus) Add ltc4286 driver")
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260329170925.34581-5-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
pxe1610_probe() writes PMBUS_PAGE to select page 0 but does not check
the return value. If the write fails, subsequent register reads operate
on an indeterminate page, leading to silent misconfiguration.
Check the return value and propagate the error using dev_err_probe(),
which also handles -EPROBE_DEFER correctly without log spam.
Fixes: 344757bac5 ("hwmon: (pmbus) Add Infineon PXE1610 VR driver")
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260329170925.34581-4-sanman.pradhan@hpe.com
[groeck: Fix "Fixes" SHA]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
i2c_smbus_read_block_data() can return 0, indicating a zero-length
read. When this happens, tps53679_identify_chip() accesses buf[ret - 1]
which is buf[-1], reading one byte before the buffer on the stack.
Fix by changing the check from "ret < 0" to "ret <= 0", treating a
zero-length read as an error (-EIO), which prevents the out-of-bounds
array access.
Also fix a typo in the adjacent comment: "if present" instead of
duplicate "if".
Fixes: 75ca1e5875 ("hwmon: (pmbus/tps53679) Add support for TPS53685")
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260329170925.34581-2-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The regulator operations pmbus_regulator_get_voltage(),
pmbus_regulator_set_voltage(), and pmbus_regulator_list_voltage()
access PMBus registers and shared data but were not protected by
the update_lock mutex. This could lead to race conditions.
However, adding mutex protection directly to these functions causes
a deadlock because pmbus_regulator_notify() (which calls
regulator_notifier_call_chain()) is often called with the mutex
already held (e.g., from pmbus_fault_handler()). If a regulator
callback then calls one of the now-protected voltage functions,
it will attempt to acquire the same mutex.
Rework pmbus_regulator_notify() to utilize a worker function to
send notifications outside of the mutex protection. Events are
stored as atomics in a per-page bitmask and processed by the worker.
Initialize the worker and its associated data during regulator
registration, and ensure it is cancelled on device removal using
devm_add_action_or_reset().
While at it, remove the unnecessary include of linux/of.h.
Cc: Sanman Pradhan <psanman@juniper.net>
Fixes: ddbb4db4ce ("hwmon: (pmbus) Add regulator support")
Reviewed-by: Sanman Pradhan <psanman@juniper.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Attributes intended to clear sensor history are intended to be writeable
only. Reading those attributes today results in reporting more or less
random values. To avoid ABI surprises, have those attributes explicitly
return 0 when reading.
Fixes: 787c095eda ("hwmon: (pmbus/core) Add support for rated attributes")
Reviewed-by: Sanman Pradhan <psanman@juniper.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Writing those attributes is not supported, so mark them as read-only.
Prior to this change, attempts to write into these attributes returned
an error.
Mark boolean fields in struct pmbus_limit_attr and in struct
pmbus_sensor_attr as bit fields to reduce configuration data size.
The data is scanned only while probing, so performance is not a concern.
Fixes: 6f183d33a0 ("hwmon: (pmbus) Add support for peak attributes")
Reviewed-by: Sanman Pradhan <psanman@juniper.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The adm1177 driver exposes the current alert threshold through
hwmon_curr_max_alarm. This violates the hwmon sysfs ABI, where
*_alarm attributes are read-only status flags and writable thresholds
must use currN_max.
The driver also stores the threshold internally in microamps, while
currN_max is defined in milliamps. Convert the threshold accordingly
on both the read and write paths.
Widen the cached threshold and related calculations to 64 bits so
that small shunt resistor values do not cause truncation or overflow.
Also use 64-bit arithmetic for the mA/uA conversions, clamp writes
to the range the hardware can represent, and propagate failures from
adm1177_write_alert_thr() instead of silently ignoring them.
Update the hwmon documentation to reflect the attribute rename and
the correct units returned by the driver.
Fixes: 09b08ac9e8 ("hwmon: (adm1177) Add ADM1177 Hot Swap Controller and Digital Power Monitor driver")
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20260325051246.28262-1-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
cputemp_is_visible() validates the channel index against
CPUTEMP_CHANNEL_NUMS, but currently uses '>' instead of '>='.
As a result, channel == CPUTEMP_CHANNEL_NUMS is not rejected even though
valid indices are 0 .. CPUTEMP_CHANNEL_NUMS - 1.
Fix the bounds check by using '>=' so invalid channel indices are
rejected before indexing the core bitmap.
Fixes: bf3608f338 ("hwmon: peci: Add cputemp driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260323002352.93417-3-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The hwmon sysfs ABI expects tempN_crit_hyst to report the temperature at
which the critical condition clears, not the hysteresis delta from the
critical limit.
The peci cputemp driver currently returns tjmax - tcontrol for
crit_hyst_type, which is the hysteresis margin rather than the
corresponding absolute temperature.
Return tcontrol directly, and update the documentation accordingly.
Fixes: bf3608f338 ("hwmon: peci: Add cputemp driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260323002352.93417-2-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The custom avs0_enable and avs1_enable sysfs attributes access PMBus
registers through the exported API helpers (pmbus_read_byte_data,
pmbus_read_word_data, pmbus_write_word_data, pmbus_update_byte_data)
without holding the PMBus update_lock mutex. These exported helpers do
not acquire the mutex internally, unlike the core's internal callers
which hold the lock before invoking them.
The store callback is especially vulnerable: it performs a multi-step
read-modify-write sequence (read VOUT_COMMAND, write VOUT_COMMAND, then
update OPERATION) where concurrent access from another thread could
interleave and corrupt the register state.
Add pmbus_lock_interruptible()/pmbus_unlock() around both the show and
store callbacks to serialize PMBus register access with the rest of the
driver.
Fixes: 038a9c3d1e ("hwmon: (pmbus/isl68137) Add driver for Intersil ISL68137 PWM Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260319173055.125271-3-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
ina233_read_word_data() reads MFR_READ_VSHUNT via pmbus_read_word_data()
but has two issues:
1. The return value is not checked for errors before being used in
arithmetic. A negative error code from a failed I2C transaction is
passed directly to DIV_ROUND_CLOSEST(), producing garbage data.
2. MFR_READ_VSHUNT is a 16-bit two's complement value. Negative shunt
voltages (values with bit 15 set) are treated as large positive
values since pmbus_read_word_data() returns them zero-extended in an
int. This leads to incorrect scaling in the VIN coefficient
conversion.
Fix both issues by adding an error check, casting to s16 for proper
sign extension, and clamping the result to a valid non-negative range.
The clamp is necessary because read_word_data callbacks must return
non-negative values on success (negative values indicate errors to the
pmbus core).
Fixes: b64b6cb163 ("hwmon: Add driver for TI INA233 Current and Power Monitor")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260319173055.125271-2-sanman.pradhan@hpe.com
[groeck: Fixed clamp to avoid losing the sign bit]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
- Generalize driver_override in the driver core, providing a common
sysfs implementation and concurrency-safe accessors for bus
implementations
- Do not use driver_override as IRQ name in the hwmon axi-fan driver
- Remove an unnecessary driver_override check in sh platform_early
- Migrate the platform bus to use the generic driver_override
infrastructure, fixing a UAF condition caused by accessing the
driver_override field without proper locking in the platform_match()
callback
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCab6dRwAKCRBFlHeO1qrK
LnELAP9MkP5mnaIbAM5/kYWaG+nQhsBTdzSbLSqv0vca7bljlwD/RFzAXOaCKvNz
8GrnY7FHzGSMPQhT+L86idGRCPmujgI=
=dxv9
-----END PGP SIGNATURE-----
Merge tag 'driver-core-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Generalize driver_override in the driver core, providing a common
sysfs implementation and concurrency-safe accessors for bus
implementations
- Do not use driver_override as IRQ name in the hwmon axi-fan driver
- Remove an unnecessary driver_override check in sh platform_early
- Migrate the platform bus to use the generic driver_override
infrastructure, fixing a UAF condition caused by accessing the
driver_override field without proper locking in the platform_match()
callback
* tag 'driver-core-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
driver core: platform: use generic driver_override infrastructure
sh: platform_early: remove pdev->driver_override check
hwmon: axi-fan: don't use driver_override as IRQ name
docs: driver-model: document driver_override
driver core: generalize driver_override in struct device
The valid range for the pulses-per-revolution devicetree property is
1..4. The current code checks for a range of 1..5. Fix it.
Declare the variable used to retrieve pulses per revolution from
devicetree as u32 (unsigned) to match the of_property_read_u32() API.
The current code uses a postfix decrement when writing the pulses per
resolution into the chip. This has no effect since the value is evaluated
before it is decremented. Fix it by decrementing before evaluating the
value.
Fixes: 7506ebcd66 ("hwmon: (max6639) : Configure based on DT property")
Cc: Naresh Solanki <naresh.solanki@9elements.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
isl68137_avs_enable_show_page() uses the return value of
pmbus_read_byte_data() without checking for errors. If the I2C transaction
fails, a negative error code is passed through bitwise operations,
producing incorrect output.
Add an error check to propagate the return value if it is negative.
Additionally, modernize the callback by replacing sprintf()
with sysfs_emit().
Fixes: 038a9c3d1e ("hwmon: (pmbus/isl68137) Add driver for Intersil ISL68137 PWM Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260318193952.47908-2-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
ina233_read_word_data() uses the return value of pmbus_read_word_data()
directly in a DIV_ROUND_CLOSEST() computation without first checking for
errors. If the underlying I2C transaction fails, a negative error code is
used in the arithmetic, producing a garbage sensor value instead of
propagating the error.
Add the missing error check before using the return value.
Fixes: b64b6cb163 ("hwmon: Add driver for TI INA233 Current and Power Monitor")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260317174553.385567-1-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In mp2869_read_byte_data() and mp2869_read_word_data(), the return value
of pmbus_read_byte_data() for PMBUS_STATUS_MFR_SPECIFIC is used directly
inside FIELD_GET() macro arguments without error checking. If the I2C
transaction fails, a negative error code is passed to FIELD_GET() and
FIELD_PREP(), silently corrupting the status register bits being
constructed.
Extract the nested pmbus_read_byte_data() calls into a separate variable
and check for errors before use. This also eliminates a redundant duplicate
read of the same register in the PMBUS_STATUS_TEMPERATURE case.
Fixes: a3a2923aaf ("hwmon: add MP2869,MP29608,MP29612 and MP29816 series driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260317173308.382545-4-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
mp2973_read_word_data() XORs the return value of pmbus_read_word_data()
with PB_STATUS_POWER_GOOD_N without first checking for errors. If the I2C
transaction fails, a negative error code is XORed with the constant,
producing a corrupted value that is returned as valid status data instead
of propagating the error.
Add the missing error check before modifying the return value.
Fixes: acda945afb ("hwmon: (pmbus/mp2975) Fix PGOOD in READ_STATUS_WORD")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260317173308.382545-3-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
hac300s_read_word_data() passes the return value of pmbus_read_word_data()
directly to FIELD_GET() without checking for errors. If the I2C transaction
fails, a negative error code is sign-extended and passed to FIELD_GET(),
which silently produces garbage data instead of propagating the error.
Add the missing error check before using the return value in
the FIELD_GET() macro.
Fixes: 669cf162f7 ("hwmon: Add support for HiTRON HAC300S PSU")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260317173308.382545-2-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Do not use driver_override as IRQ name, as it is not guaranteed to point
to a valid string; use NULL instead (which makes the devm IRQ helpers
use dev_name()).
Fixes: 8412b410fa ("hwmon: Support ADI Fan Control IP")
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260303115720.48783-4-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Subsystem:
- simplify combined i3c/i2c dependencies
Drivers:
- dw: handle 2C properly, fix possible race condition
- mipi-i3c-hci: many DMA related fixes
-----BEGIN PGP SIGNATURE-----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=Ojo2
-----END PGP SIGNATURE-----
Merge tag 'i3c/fixes-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c fixes from Alexandre Belloni:
"This introduces the I3C_OR_I2C symbol which is not a fix per se but is
affecting multiple subsystems so it is included to ease
synchronization.
Apart from that, Adrian is mostly fixing the mipi-i3c-hci driver DMA
handling, and I took the opportunity to add two fixes for the dw-i3c
driver.
Subsystem:
- simplify combined i3c/i2c dependencies
Drivers:
- dw: handle 2C properly, fix possible race condition
- mipi-i3c-hci: many DMA related fixes"
* tag 'i3c/fixes-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: dw-i3c-master: Set SIR_REJECT in DAT on device attach and reattach
i3c: master: dw-i3c: Fix missing of_node for virtual I2C adapter
i3c: mipi-i3c-hci: Fallback to software reset when bus disable fails
i3c: mipi-i3c-hci: Fix handling of shared IRQs during early initialization
i3c: mipi-i3c-hci: Fix race in DMA error handling in interrupt context
i3c: mipi-i3c-hci: Consolidate common xfer processing logic
i3c: mipi-i3c-hci: Restart DMA ring correctly after dequeue abort
i3c: mipi-i3c-hci: Add missing TID field to no-op command descriptor
i3c: mipi-i3c-hci: Correct RING_CTRL_ABORT handling in DMA dequeue
i3c: mipi-i3c-hci: Fix race between DMA ring dequeue and interrupt handler
i3c: mipi-i3c-hci: Fix race in DMA ring dequeue
i3c: mipi-i3c-hci: Fix race in DMA ring enqueue for parallel xfers
i3c: mipi-i3c-hci: Consolidate spinlocks
i3c: mipi-i3c-hci: Factor out DMA mapping from queuing path
i3c: mipi-i3c-hci: Fix Hot-Join NACK
i3c: mipi-i3c-hci: Use ETIMEDOUT instead of ETIME for timeout errors
i3c: simplify combined i3c/i2c dependencies
The q54sj108a2_debugfs_read function suffers from a stack buffer overflow
due to incorrect arguments passed to bin2hex(). The function currently
passes 'data' as the destination and 'data_char' as the source.
Because bin2hex() converts each input byte into two hex characters, a
32-byte block read results in 64 bytes of output. Since 'data' is only
34 bytes (I2C_SMBUS_BLOCK_MAX + 2), this writes 30 bytes past the end
of the buffer onto the stack.
Additionally, the arguments were swapped: it was reading from the
zero-initialized 'data_char' and writing to 'data', resulting in
all-zero output regardless of the actual I2C read.
Fix this by:
1. Expanding 'data_char' to 66 bytes to safely hold the hex output.
2. Correcting the bin2hex() argument order and using the actual read count.
3. Using a pointer to select the correct output buffer for the final
simple_read_from_buffer call.
Fixes: d014538aa3 ("hwmon: (pmbus) Driver for Delta power supplies Q54SJ108A2")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260304235116.1045-1-sanman.p211993@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
According to MAX6639 documentation:
D1: PWM Output Polarity. PWM output is low at
100% duty cycle when this bit is set to zero. PWM
output is high at 100% duty cycle when this bit is set
to 1.
Up to commit 0f33272b60 ("hwmon: (max6639) : Update hwmon init using
info structure"), the polarity was set to high (0x2) when no platform
data was set. After the patch, the polarity register wasn't set anymore
if no platform data was specified. Nowadays, since commit 7506ebcd66
("hwmon: (max6639) : Configure based on DT property"), it is always set
to low which doesn't match with the comment above and change the
behavior compared to versions prior 0f33272b60.
Fixes: 0f33272b60 ("hwmon: (max6639) : Update hwmon init using info structure")
Signed-off-by: Olivier Sobrie <olivier@sobrie.be>
Link: https://lore.kernel.org/r/20260304212039.570274-1-olivier@sobrie.be
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
All combined i2c/i3c drivers appear to suffer from the same link
time problem when CONFIG_I3C is set to 'm':
arm-linux-gnueabi-ld: drivers/iio/magnetometer/mmc5633.o: in function `mmc5633_i3c_driver_init':
mmc5633.c:(.init.text+0x30): undefined reference to `i3c_driver_register_with_owner'
This was previously fixed every time by marking individual
drivers as 'depends on I2C; depends on I3C || !I3C', but this gets
tedious and is somewhat confusing.
Add a Kconfig symbol 'I3C_OR_I2C' to help replace those dependencies,
and use this in all the existing drivers that had already fixed it
as well as the new mmc5633 driver.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260204164216.544409-1-arnd@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Return early in it87_resume() if it87_lock() fails instead of ignoring the
return value of that function. This patch suppresses a Clang thread-safety
warning.
Cc: Frank Crawford <frank@crawford.emu.id.au>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
Fixes: 376e1a937b ("hwmon: (it87) Add calls to smbus_enable/smbus_disable as required")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20260223220102.2158611-15-bart.vanassche@linux.dev
[groeck: Declare 'ret' at the beginning of it87_resume()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This reverts commit 443b39c82c.
I was just informed that this product is discontinued (without being
ever released to the market). Pull the plug and let's not waste any more
maintainers time.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20260223100459.844967-4-mwalle@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
According to the AHT20 datasheet (updated to V1.0 after the 2023.09
version), the initialization command for AHT20 is 0b10111110 (0xBE).
The previous sequence (0xE1) used in earlier versions is no longer
compatible with newer AHT20 sensors. Update the initialization
command to ensure the sensor is properly initialized.
While at it, use binary notation for DHT20_CMD_INIT to match the notation
used in the datasheet.
Fixes: d2abcb5cc8 ("hwmon: (aht10) Add support for compatible aht20")
Signed-off-by: Hao Yu <haoyufine@gmail.com>
Link: https://lore.kernel.org/r/20260222170332.1616-3-haoyufine@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The macsmc-hwmon driver experienced several issues related to value
scaling and type conversion:
1. macsmc_hwmon_read_f32_scaled() clipped values to INT_MAX/INT_MIN.
On 64-bit systems, hwmon supports long values, so clipping to
32-bit range was premature and caused loss of range for high-power
sensors. Changed it to use long and clip to LONG_MAX/LONG_MIN.
2. The overflow check in macsmc_hwmon_read_f32_scaled() used 1UL,
which is 32-bit on some platforms. Switched to 1ULL.
3. macsmc_hwmon_read_key() used a u32 temporary variable for f32
values. When assigned to a 64-bit long, negative values were
zero-extended instead of sign-extended, resulting in large
positive numbers.
4. macsmc_hwmon_read_ioft_scaled() used mult_frac() which could
overflow during intermediate multiplication. Switched to
mul_u64_u32_div() to handle the 64-bit multiplication safely.
5. ioft values (unsigned 48.16) could overflow long when scaled
by 1,000,000. Added explicit clipping to LONG_MAX in the caller.
6. macsmc_hwmon_write_f32() truncated its long argument to int,
potentially causing issues for large values.
Fix these issues by using appropriate types and helper functions.
Fixes: 785205fd81 ("hwmon: Add Apple Silicon SMC hwmon driver")
Cc: James Calligeros <jcalligeros99@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Neal Gompa <neal@gompa.dev>
Cc: Janne Grunau <j@jannau.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20260129175112.3751907-3-linux@roeck-us.net
Reviewed-by: James Calligeros <jcalligeros99@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The recently added macsmc-hwmon driver contained several critical
bugs in its sensor population logic and float conversion routines.
Specifically:
- The voltage sensor population loop used the wrong prefix ("volt-"
instead of "voltage-") and incorrectly assigned sensors to the
temperature sensor array (hwmon->temp.sensors) instead of the
voltage sensor array (hwmon->volt.sensors). This would lead to
out-of-bounds memory access or data corruption when both temperature
and voltage sensors were present.
- The float conversion in macsmc_hwmon_write_f32() had flawed exponent
logic for values >= 2^24 and lacked masking for the mantissa, which
could lead to incorrect values being written to the SMC.
Fix these issues to ensure correct sensor registration and reliable
manual fan control.
Confirm that the reported overflow in FIELD_PREP is fixed by declaring
macsmc_hwmon_write_f32() as __always_inline for a compile test.
Fixes: 785205fd81 ("hwmon: Add Apple Silicon SMC hwmon driver")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/linux-hwmon/20260119195817.GA1035354@ax162/
Cc: James Calligeros <jcalligeros99@gmail.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Neal Gompa <neal@gompa.dev>
Cc: Janne Grunau <j@jannau.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build only
Link: https://lore.kernel.org/r/20260129175112.3751907-2-linux@roeck-us.net
Reviewed-by: James Calligeros <jcalligeros99@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Total patches: 107
Reviews/patch: 1.07
Reviewed rate: 67%
- The 2 patch series "ocfs2: give ocfs2 the ability to reclaim
suballocator free bg" from Heming Zhao saves disk space by teaching
ocfs2 to reclaim suballocator block group space.
- The 4 patch series "Add ARRAY_END(), and use it to fix off-by-one
bugs" from Alejandro Colomar adds the ARRAY_END() macro and uses it in
various places.
- The 2 patch series "vmcoreinfo: support VMCOREINFO_BYTES larger than
PAGE_SIZE" from Pnina Feder makes the vmcore code future-safe, if
VMCOREINFO_BYTES ever exceeds the page size.
- The 7 patch series "kallsyms: Prevent invalid access when showing
module buildid" from Petr Mladek cleans up kallsyms code related to
module buildid and fixes an invalid access crash when printing
backtraces.
- The 3 patch series "Address page fault in
ima_restore_measurement_list()" from Harshit Mogalapalli fixes a
kexec-related crash that can occur when booting the second-stage kernel
on x86.
- The 6 patch series "kho: ABI headers and Documentation updates" from
Mike Rapoport updates the kexec handover ABI documentation.
- The 4 patch series "Align atomic storage" from Finn Thain adds the
__aligned attribute to atomic_t and atomic64_t definitions to get
natural alignment of both types on csky, m68k, microblaze, nios2,
openrisc and sh.
- The 2 patch series "kho: clean up page initialization logic" from
Pratyush Yadav simplifies the page initialization logic in
kho_restore_page().
- The 6 patch series "Unload linux/kernel.h" from Yury Norov moves
several things out of kernel.h and into more appropriate places.
- The 7 patch series "don't abuse task_struct.group_leader" from Oleg
Nesterov removes the usage of ->group_leader when it is "obviously
unnecessary".
- The 5 patch series "list private v2 & luo flb" from Pasha Tatashin
adds some infrastructure improvements to the live update orchestrator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY4giAAKCRDdBJ7gKXxA
jgusAQDnKkP8UWTqXPC1jI+OrDJGU5ciAx8lzLeBVqMKzoYk9AD/TlhT2Nlx+Ef6
0HCUHUD0FMvAw/7/Dfc6ZKxwBEIxyww=
=mmsH
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
- New drivers
* PMBus driver for HiTRON HAC300S power supply
* PMBus Driver for Monolithic MP5926 Hot-Swap Controller
* PMBus Driver for STEF48H28 hot-swap controller
- Support for new chips in existing drivers
* asus-ec-sensors: Support for Pro WS TRX50-SAGE WIFI A and
ROG MAXIMUS X HERO
* dell-smm: Support for Dell OptiPlex 7080
* f71882fg: Support for F81968
* gpd-fan: Support for Micro PC 2
* nct6683: New customer ID for ASRock Z590 Taichi
* nct6775: Support for ASUS Pro WS WRX90E-SAGE SE
* sht3x: Support for SHT85
* tmp108: Support for P3T1035 and P3T2030
- Bug fixes
* ibmpex: Revert "fix" for UAF which didn't fix a UAF but introduced a
race condition resulting in a NULL pointer crash.
* pmbus/mpq8785: Fix failure to instantiate driver if the chip is
configured for VID mode
* max16065: Use READ/WRITE_ONCE to avoid compiler optimization induced
race
* nct7363, emc2305: Resource leak fixes
- Other notable changes
* cros_ec: Support for temperature limit thresholds
* coretemp: Add TjMax for Silvermont through Tremont Atoms
Various other minor improvements.
-----BEGIN PGP SIGNATURE-----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=CTbI
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New PMBus drivers:
- HiTRON HAC300S power supply
- Monolithic MP5926 Hot-Swap Controller
- STEF48H28 hot-swap controller
Support for new chips in existing drivers
- Support for Pro WS TRX50-SAGE WIFI A and ROG MAXIMUS X HERO
(asus-ec-sensors)
- Support for Dell OptiPlex 7080 (dell-smm)
- Support for F81968 (f71882fg)
- Support for Micro PC 2 (gpd-fan)
- New customer ID for ASRock Z590 Taichi (nct6683)
- Support for ASUS Pro WS WRX90E-SAGE SE (nct6775)
- Support for SHT85 (sht3x)
- Support for P3T1035 and P3T2030 (tmp108)
Bug fixes:
- Revert "fix" for UAF which didn't fix a UAF but introduced a race
condition resulting in a NULL pointer crash (ibmpex)
- Fix failure to instantiate driver if the chip is configured for VID
mode (pmbus/mpq8785)
- Use READ/WRITE_ONCE to avoid compiler optimization induced race
(max16065)
- Resource leak fixes (nct7363, emc2305)
Other notable changes:
- Support for temperature limit thresholds (cros_ec)
- Add TjMax for Silvermont through Tremont Atoms (coretemp)
Various other minor improvements"
* tag 'hwmon-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (42 commits)
hwmon: (pmbus/mpq8785) fix VOUT_MODE mismatch during identification
Revert "hwmon: (ibmpex) fix use-after-free in high/low store"
hwmon: (max16065) Use READ/WRITE_ONCE to avoid compiler optimization induced race
hwmon: (nct6775) use sysfs_emit instead of sprintf
hwmon: pmbus: fix table in STEF48H28 documentation
hwmon: Add support for HiTRON HAC300S PSU
dt-bindings: trivial-devices: Add hitron,hac300s
hwmon: (cros_ec) Add support for temperature thresholds
hwmon: (cros_ec) Move temperature channel params to a macro
hwmon: (cros_ec) Add support for fan target speed
hwmon: (cros_ec) Split up supported features in the documentation
hwmon: (tmp108) Add P3T1035 and P3T2030 support
hwmon: (tmp108) Add support for P3T1035 and P3T2030
dt-bindings: hwmon: ti,tmp108: Add P3T1035,P3T2030
hwmon: pmbus: add support for STEF48H28
dt-bindings: hwmon: add STEF48H28
hwmon: (nct7363) Fix a resource leak in nct7363_present_pwm_fanin
hwmon: (emc2305) Fix a resource leak in emc2305_of_parse_pwm_child
hwmon: (gpd-fan) add support for Micro PC 2
hwmon: (coretemp) Add TjMax for Silvermont through Tremont Atoms
...
When MPQ8785 reports VOUT_MODE as VID mode, mpq8785_identify()
configures the driver for direct mode. The subsequent
pmbus_identify_common() check then fails due to a mismatch
between the reported mode and the configured mode, causing
device initialization to fail.
Override the reported VOUT_MODE to direct mode to keep the
driver configuration consistent with the reported mode and
allow successful device initialization.
This does not change how voltages are interpreted, but avoids
a false identification failure caused by mismatched mode
handling.
Fixes: f20b4a9311 ("hwmon: Add driver for MPS MPQ8785 Synchronous Step-Down Converter")
Signed-off-by: Carl Lee <carl.lee@amd.com>
Link: https://lore.kernel.org/r/20260210-dt-bindings-hwmon-pmbus-mpq8785-add-mpq8786-support-v3-1-84636ccfe76f@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This reverts commit 6946c726c3.
Jean Delvare points out that the patch does not completely
fix the reported problem, that it in fact introduces a
(new) race condition, and that it may actually not be needed in
the first place.
Various AI reviews agree. Specific and relevant AI feedback:
"
This reordering sets the driver data to NULL before removing the sensor
attributes in the loop below.
ibmpex_show_sensor() retrieves this driver data via dev_get_drvdata() but
does not check if it is NULL before dereferencing it to access
data->sensors[].
If a userspace process reads a sensor file (like temp1_input) while this
delete function is running, could it race with the dev_set_drvdata(...,
NULL) call here and crash in ibmpex_show_sensor()?
Would it be safer to keep the original order where device_remove_file() is
called before clearing the driver data? device_remove_file() should wait
for any active sysfs callbacks to complete, which might already prevent the
use-after-free this patch intends to fix.
"
Revert the offending patch. If it can be shown that the originally reported
alleged race condition does indeed exist, it can always be re-introduced
with a complete fix.
Reported-by: Jean Delvare <jdelvare@suse.de>
Closes: https://lore.kernel.org/linux-hwmon/20260121095342.73e723cb@endymion/
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Junrui Luo <moonafterrain@outlook.com>
Fixes: 6946c726c3 ("hwmon: (ibmpex) fix use-after-free in high/low store")
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Simply copying shared data to a local variable cannot prevent data
races. The compiler is allowed to optimize away the local copy and
re-read the shared memory, causing a Time-of-Check Time-of-Use (TOCTOU)
issue if the data changes between the check and the usage.
To enforce the use of the local variable, use READ_ONCE() when reading
the shared data and WRITE_ONCE() when updating it. Apply these macros to
the three identified locations (curr_sense, adc, and fault) where local
variables are used for error validation, ensuring the value remains
consistent.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Closes: https://lore.kernel.org/all/6fe17868327207e8b850cf9f88b7dc58b2021f73.camel@decadent.org.uk/
Fixes: f5bae2642e ("hwmon: Driver for MAX16065 System Manager and compatibles")
Fixes: b8d5acdcf5 ("hwmon: (max16065) Use local variable to avoid TOCTOU")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20260203121443.5482-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Replace sprintf() with sysfs_emit() in sysfs 'show' functions.
sysfs_emit() is preferred because it automatically handles the
buffer size and PAGE_SIZE boundary checks, preventing potential
buffer overflows.
This aligns the legacy code with the new functions in the driver
that already utilize sysfs_emit.
Signed-off-by: Filippo Muscherà <filippo.muschera@gmail.com>
Link: https://lore.kernel.org/r/20260201202721.3871-1-filippo.muschera@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add Support for HiTRON HAC300S PSU. This is a AC/DC hot-swappable
CompactPCI Serial Dual output active current sharing switching power
supply with a 312W rating.
Signed-off-by: Vasileios Amoiridis <vasileios.amoiridis@cern.ch>
Link: https://lore.kernel.org/r/20260119190806.35276-3-vassilisamir@gmail.com
[groeck: Fix whitespace / alignment problems; return -ENODATA from
hac300s_read_byte_data() if the PMBus core can handle the operation]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Implement reading temperature thresholds through
EC_CMD_THERMAL_GET_THRESHOLD/EC_CMD_THERMAL_SET_THRESHOLD.
Thresholds are mapped as follows between the EC and hwmon:
hwmon_temp_max - EC_TEMP_THRESH_WARN
hwmon_temp_crit - EC_TEMP_THRESH_HIGH
hwmon_temp_emergency - EC_TEMP_THRESH_HALT
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20260118-cros_ec-hwmon-pwm-v2-4-77eb1709b031@weissschuh.net
[groeck: Rearrange code to no longer use unreachable() since that causes
a hiccup with some versions of gcc and objtool]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This is a printf-style function, which gcc -Werror=suggest-attribute=format
correctly points out:
drivers/hwmon/occ/common.c: In function 'occ_init_attribute':
drivers/hwmon/occ/common.c:761:9: error: function 'occ_init_attribute' might be a candidate for 'gnu_printf' format attribute [-Werror=suggest-attribute=format]
Add the attribute to avoid this warning and ensure any incorrect
format strings are detected here.
Fixes: 744c2fe950 ("hwmon: (occ) Rework attribute registration for stack usage")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20260203163440.2674340-1-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When CONFIG_PM is disabled, the GPIO controlled FANs can't be stopped by
using the sysfs attributes since commit 0d01110e63 ("hwmon: (gpio-fan)
Add regulator support").
Using either the 'pwm1' or the 'fan1_target' attribute fails the same way:
$ echo 0 > /sys/class/hwmon/hwmon1/pwm1
ash: write error: Function not implemented
$ echo 0 > /sys/class/hwmon/hwmon1/fan1_target
ash: write error: Function not implemented
Both commands were working flawlessly before the mentioned commit.
The issue happens because pm_runtime_put_sync() returns with -ENOSYS
when CONFIG_PM is disabled, and the set_fan_speed() function handles
this as an error.
In order to restore the previous behaviour, change the error check in
the set_fan_speed() function to ignore the -ENOSYS error code.
Cc: stable@vger.kernel.org
Fixes: 0d01110e63 ("hwmon: (gpio-fan) Add regulator support")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20260202-gpio-fan-stop-fix-v1-1-c7853183d93d@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The set_rpm function is used as a 'store' callback of a device attribute,
and as such it should return with the number of bytes consumed. However
since commit 0d01110e63 ("hwmon: (gpio-fan) Add regulator support"),
the function returns with zero on success.
Due to this, the function gets called again and again whenever the user
tries to change the FAN speed by writing the desired RPM value into the
'fan1_target' sysfs attribute.
The broken behaviour can be reproduced easily. For example, the following
command never returns unless it gets terminated:
$ echo 500 > /sys/class/hwmon/hwmon1/fan1_target
^C
$
Change the code to return with the same value as the 'count' parameter
on success to indicate that all bytes from the input buffer are consumed.
The function behaved the same way prior to the offending change.
Cc: stable@vger.kernel.org
Fixes: 0d01110e63 ("hwmon: (gpio-fan) Add regulator support")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20260201-gpio-fan-set_rpm-retval-fix-v1-1-dc39bc7693ca@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
An upcoming change will add more channel parameters.
This leads to a lot of churn and very long lines.
Use a macro to encapsulate all of the shared values.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20260118-cros_ec-hwmon-pwm-v2-3-77eb1709b031@weissschuh.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use EC_CMD_PWM_GET_FAN_TARGET_RPM to retrieve the target fan speed.
The EC only supports this for the first fan.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20260118-cros_ec-hwmon-pwm-v2-2-77eb1709b031@weissschuh.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for the P3T1035 & P3T2030 temperature sensor. While mostly
compatible with the TMP108, P3T1035 uses an 8-bit configuration register
instead of the 16-bit layout used by TMP108. Updated driver to handle
this difference during configuration read/write.
Signed-off-by: Mayank Mahajan <mayankmahajan.x@nxp.com>
Link: https://lore.kernel.org/r/20260119040459.2898998-2-mayankmahajan.x@nxp.com
[groeck: Reordered include files to retain alphabetic order]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
