mirror of
https://github.com/torvalds/linux.git
synced 2026-05-30 01:53:29 +02:00
v7.0-rc2
11210 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
949d0a46ad |
Arm:
* Make sure we don't leak any S1POE state from guest to guest when
the feature is supported on the HW, but not enabled on the host
* Propagate the ID registers from the host into non-protected VMs
managed by pKVM, ensuring that the guest sees the intended feature set
* Drop double kern_hyp_va() from unpin_host_sve_state(), which could
bite us if we were to change kern_hyp_va() to not being idempotent
* Don't leak stage-2 mappings in protected mode
* Correctly align the faulting address when dealing with single page
stage-2 mappings for PAGE_SIZE > 4kB
* Fix detection of virtualisation-capable GICv5 IRS, due to the
maintainer being obviously fat fingered... [his words, not mine]
* Remove duplication of code retrieving the ASID for the purpose of
S1 PT handling
* Fix slightly abusive const-ification in vgic_set_kvm_info()
Generic:
* Remove internal Kconfigs that are now set on all architectures.
* Remove per-architecture code to enable KVM_CAP_SYNC_MMU, all
architectures finally enable it in Linux 7.0.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmmkSMUUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroO2tggAgOHvH9lwgHxFADAOKXPEsv+Tw6cB
zuUBPo6e5XQQx6BJQVo8ctveCBbA0ybRJXbju6lgS/Bg9qQYKjZbNrYdKwBwhw3b
JBUFTIJgl7lLU5gEANNtvgiiNUc2z1GfG8NQ5ovMJ0/MDEEI0YZjkGoe8ZyJ54vg
qrNHBROKvt54wVHXFGhZ1z8u4RqJ/WCmy21wYbwiMgQGXq9ugRRfhnu3iGNO8BcK
bSSh4cP7qusO5Nj0m/XYD/68VwvyogaEkh4sNS1VH0FOoONRWs80Q6iT2HjCGgv6
mAzCx/yB9ziSQRis3oYYEBH23HZxRVDVBeSBlPcbxE3VM7SGzp7O8L692g==
=+mC+
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Arm:
- Make sure we don't leak any S1POE state from guest to guest when
the feature is supported on the HW, but not enabled on the host
- Propagate the ID registers from the host into non-protected VMs
managed by pKVM, ensuring that the guest sees the intended feature
set
- Drop double kern_hyp_va() from unpin_host_sve_state(), which could
bite us if we were to change kern_hyp_va() to not being idempotent
- Don't leak stage-2 mappings in protected mode
- Correctly align the faulting address when dealing with single page
stage-2 mappings for PAGE_SIZE > 4kB
- Fix detection of virtualisation-capable GICv5 IRS, due to the
maintainer being obviously fat fingered... [his words, not mine]
- Remove duplication of code retrieving the ASID for the purpose of
S1 PT handling
- Fix slightly abusive const-ification in vgic_set_kvm_info()
Generic:
- Remove internal Kconfigs that are now set on all architectures
- Remove per-architecture code to enable KVM_CAP_SYNC_MMU, all
architectures finally enable it in Linux 7.0"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: always define KVM_CAP_SYNC_MMU
KVM: remove CONFIG_KVM_GENERIC_MMU_NOTIFIER
KVM: arm64: Deduplicate ASID retrieval code
irqchip/gic-v5: Fix inversion of IRS_IDR0.virt flag
KVM: arm64: Revert accidental drop of kvm_uninit_stage2_mmu() for non-NV VMs
KVM: arm64: Fix protected mode handling of pages larger than 4kB
KVM: arm64: vgic: Handle const qualifier from gic_kvm_info allocation type
KVM: arm64: Remove redundant kern_hyp_va() in unpin_host_sve_state()
KVM: arm64: Fix ID register initialization for non-protected pKVM guests
KVM: arm64: Optimise away S1POE handling when not supported by host
KVM: arm64: Hide S1POE from guests when not supported by the host
|
||
|
|
70295a479d |
KVM: always define KVM_CAP_SYNC_MMU
KVM_CAP_SYNC_MMU is provided by KVM's MMU notifiers, which are now always available. Move the definition from individual architectures to common code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
|
407fd8b8d8 |
KVM: remove CONFIG_KVM_GENERIC_MMU_NOTIFIER
All architectures now use MMU notifier for KVM page table management. Remove the Kconfig symbol and the code that is used when it is disabled. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
|
d879ac6756 |
s390/pfault: Fix virtual vs physical address confusion
When Linux is running as guest, runs a user space process and the
user space process accesses a page that the host has paged out,
the guest gets a pfault interrupt and schedules a different process.
Without this mechanism the host would have to suspend the whole
virtual CPU until the page has been paged in.
To setup the pfault interrupt the real address of parameter list
should be passed to DIAGNOSE 0x258, but a virtual address is passed
instead.
That has a performance impact, since the pfault setup never succeeds,
the interrupt is never delivered to a guest and the whole virtual CPU
is suspended as result.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
|
1623a554c6 |
s390/kexec: Disable stack protector in s390_reset_system()
s390_reset_system() calls set_prefix(0), which switches back to the
absolute lowcore. At that point the stack protector canary no longer
matches the canary from the lowcore the function was entered with, so
the stack check fails.
Mark s390_reset_system() __no_stack_protector. This is safe here since
its callers (__do_machine_kdump() and __do_machine_kexec()) are
effectively no-return and fall back to disabled_wait() on failure.
Fixes:
|
||
|
|
acbc0437ca |
s390/idle: Remove psw_idle() prototype
psw_idle() does not exist anymore. Remove its prototype. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
|
80f63fd09e |
s390/vtime: Use lockdep_assert_irqs_disabled() instead of BUG_ON()
Use lockdep_assert_irqs_disabled() instead of BUG_ON(). This avoids crashing the kernel, and generates better code if CONFIG_PROVE_LOCKING is disabled. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
|
e282ccd308 |
s390/vtime: Use __this_cpu_read() / get rid of READ_ONCE()
do_account_vtime() runs always with interrupts disabled, therefore use __this_cpu_read() instead of this_cpu_read() to get rid of a pointless preempt_disable() / preempt_enable() pair. Also there are no concurrent writers to the cpu time accounting fields in lowcore. Therefore get rid of READ_ONCE() usages. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
|
d8b5cf9c63 |
s390/irq/idle: Remove psw bits early
Remove wait, io, external interrupt bits early in do_io_irq()/do_ext_irq() when previous context was idle. This saves one conditional branch and is closer to the original old assembly code. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
|
257c14e5a1 |
s390/idle: Inline update_timer_idle()
Inline update_timer_idle() again to avoid an extra function call. This way the generated code is close to old assembler version again. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
|
00d8b035eb |
s390/idle: Slightly optimize idle time accounting
Slightly optimize account_idle_time_irq() and update_timer_idle(): - Use fast single instruction __atomic64() primitives to update per cpu idle_time and idle_count, instead of READ_ONCE() / WRITE_ONCE() pairs - stcctm() is an inline assembly with a full memory barrier. This leads to a not necessary extra dereference of smp_cpu_mtid in update_timer_idle(). Avoid this and read smp_cpu_mtid into a variable - Use __this_cpu_add() instead of this_cpu_add() to avoid disabling / enabling of preemption several times in a loop in update_timer_idle(). Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
|
aefa6ec890 |
s390/idle: Add comment for non obvious code
Add a comment to update_timer_idle() which describes why wall time (not steal time) is added to steal_timer. This is not obvious and was reported by Frederic Weisbecker. Reported-by: Frederic Weisbecker <frederic@kernel.org> Closes: https://lore.kernel.org/all/aXEVM-04lj0lntMr@localhost.localdomain/ Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
|
dbc0fb3567 |
s390/vtime: Fix virtual timer forwarding
Since delayed accounting of system time [1] the virtual timer is
forwarded by do_account_vtime() but also vtime_account_kernel(),
vtime_account_softirq(), and vtime_account_hardirq(). This leads
to double accounting of system, guest, softirq, and hardirq time.
Remove accounting from the vtime_account*() family to restore old behavior.
There is only one user of the vtimer interface, which might explain
why nobody noticed this so far.
Fixes:
|
||
|
|
0d785e2c32 |
s390/idle: Fix cpu idle exit cpu time accounting
With the conversion to generic entry [1] cpu idle exit cpu time accounting
was converted from assembly to C. This introduced an reversed order of cpu
time accounting.
On cpu idle exit the current accounting happens with the following call
chain:
-> do_io_irq()/do_ext_irq()
-> irq_enter_rcu()
-> account_hardirq_enter()
-> vtime_account_irq()
-> vtime_account_kernel()
vtime_account_kernel() accounts the passed cpu time since last_update_timer
as system time, and updates last_update_timer to the current cpu timer
value.
However the subsequent call of
-> account_idle_time_irq()
will incorrectly subtract passed cpu time from timer_idle_enter to the
updated last_update_timer value from system_timer. Then last_update_timer
is updated to a sys_enter_timer, which means that last_update_timer goes
back in time.
Subsequently account_hardirq_exit() will account too much cpu time as
hardirq time. The sum of all accounted cpu times is still correct, however
some cpu time which was previously accounted as system time is now
accounted as hardirq time, plus there is the oddity that last_update_timer
goes back in time.
Restore previous behavior by extracting cpu time accounting code from
account_idle_time_irq() into a new update_timer_idle() function and call it
before irq_enter_rcu().
Fixes:
|
||
|
|
189f164e57 |
Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
|
32a92f8c89 |
Convert more 'alloc_obj' cases to default GFP_KERNEL arguments
This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
|
bf4afc53b7 |
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
|
69050f8d6d |
treewide: Replace kmalloc with kmalloc_obj for non-scalar types
This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
|
9806790115 |
s390 fixes for 7.0 merge window
- Make KEXEC_SIG available again for CONFIG_MODULES=n - The s390 topology code used to call rebuild_sched_domains() before common code scheduling domains were setup. This was silently ignored by common code, but now results in a warning. Address by avoiding the early call - Convert debug area lock from spinlock to raw spinlock to address lockdep warnings - The recent 3490 tape device driver rework resulted in a different device driver name, which is visible via sysfs for user space. This breaks at least one user space application. Change the device driver name back to its old name to fix this -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmmYUo8ACgkQIg7DeRsp bsL+rw//f6AadV9X3tCPe/vaNdxQWkVtd1Ov+eKYkIohSFvghBo4+4c6qXlsc4jp Opedqs2+YUdx2/tR3nTPkfG/Nm49rGpB+i4CYAjBUlAjIN1czyUlvICJ6ZVQbpQt zR+I7Ej/QsBR0XMqbUfPNWMwbdZlW395kXNhCAKckbjM1M+Hezp9WZjuaQ1vWCUv wGXAUI+/fTgPKUu3nIQRw2JkG2M+IfFj3jkYMXTW8D8WzoqLXPwtjmjcDtTU/VDr otq97rDUd8MvNsxV5hX+T7nI0JQIFrdb32bCy0mhWhnvc7rHdewLfp5+793vKG/K DcOouXr/vJcPUhAUQI3ksREAwAEJV1phKeILXbbUhpkAZUQAozVG6+YrzMk/4VSW Zm6BGcOLVo0DQtn97I55gKSPFiNoCQwSdU+CcrbzA8aEDBMfxLFKBvh50sAx/0I3 zXbXYDjgPdqOKuyUprB8Y6PJTrCnHebXPGs2Kgl2XU3k4m61h/60EHIXe6w0ErM8 1hl8+Rdn4jmWDcAOFKTBpo8Y/o+WZVcNssPr4F7ArcjJTWmAtxWP3NQAux3UM2HW 3dOV6dcdbmndKSmKwtWrvMVv0GvcgWAp/NhjwKx37EovYLFJg4DqtiioqiOFjWKD 4gwIB8gKxbWjNSGq3cKTiH021iWoRIDoCeAFJWRdrH5xt7rxCWc= =7EJS -----END PGP SIGNATURE----- Merge tag 's390-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - Make KEXEC_SIG available again for CONFIG_MODULES=n - The s390 topology code used to call rebuild_sched_domains() before common code scheduling domains were setup. This was silently ignored by common code, but now results in a warning. Address by avoiding the early call - Convert debug area lock from spinlock to raw spinlock to address lockdep warnings - The recent 3490 tape device driver rework resulted in a different device driver name, which is visible via sysfs for user space. This breaks at least one user space application. Change the device driver name back to its old name to fix this * tag 's390-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/tape: Fix device driver name s390/debug: Convert debug area lock from a spinlock to a raw spinlock s390/smp: Avoid calling rebuild_sched_domains() early s390/kexec: Make KEXEC_SIG available when CONFIG_MODULES=n |
||
|
|
3ce500aac0 |
s390/debug: Convert debug area lock from a spinlock to a raw spinlock
With PREEMPT_RT as potential configuration option, spinlock_t is now considered as a sleeping lock, and thus might cause issues when used in an atomic context. But even with PREEMPT_RT as potential configuration option, raw_spinlock_t remains as a true spinning lock/atomic context. This creates potential issues with the s390 debug/tracing feature. The functions to trace errors are called in various contexts, including under lock of raw_spinlock_t, and thus the used spinlock_t in each debug area is in violation of the locking semantics. Here are two examples involving failing PCI Read accesses that are traced while holding `pci_lock` in `drivers/pci/access.c`: ============================= [ BUG: Invalid wait context ] 6.19.0-devel #18 Not tainted ----------------------------- bash/3833 is trying to lock: 0000027790baee30 (&rc->lock){-.-.}-{3:3}, at: debug_event_common+0xfc/0x300 other info that might help us debug this: context-{5:5} 5 locks held by bash/3833: #0: 0000027efbb29450 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x7c/0xf0 #1: 00000277f0504a90 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x13e/0x260 #2: 00000277beed8c18 (kn->active#339){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x164/0x260 #3: 00000277e9859190 (&dev->mutex){....}-{4:4}, at: pci_dev_lock+0x2e/0x40 #4: 00000383068a7708 (pci_lock){....}-{2:2}, at: pci_bus_read_config_dword+0x4a/0xb0 stack backtrace: CPU: 6 UID: 0 PID: 3833 Comm: bash Kdump: loaded Not tainted 6.19.0-devel #18 PREEMPTLAZY Hardware name: IBM 9175 ME1 701 (LPAR) Call Trace: [<00000383048afec2>] dump_stack_lvl+0xa2/0xe8 [<00000383049ba166>] __lock_acquire+0x816/0x1660 [<00000383049bb1fa>] lock_acquire+0x24a/0x370 [<00000383059e3860>] _raw_spin_lock_irqsave+0x70/0xc0 [<00000383048bbb6c>] debug_event_common+0xfc/0x300 [<0000038304900b0a>] __zpci_load+0x17a/0x1f0 [<00000383048fad88>] pci_read+0x88/0xd0 [<00000383054cbce0>] pci_bus_read_config_dword+0x70/0xb0 [<00000383054d55e4>] pci_dev_wait+0x174/0x290 [<00000383054d5a3e>] __pci_reset_function_locked+0xfe/0x170 [<00000383054d9b30>] pci_reset_function+0xd0/0x100 [<00000383054ee21a>] reset_store+0x5a/0x80 [<0000038304e98758>] kernfs_fop_write_iter+0x1e8/0x260 [<0000038304d995da>] new_sync_write+0x13a/0x180 [<0000038304d9c5d0>] vfs_write+0x200/0x330 [<0000038304d9c88c>] ksys_write+0x7c/0xf0 [<00000383059cfa80>] __do_syscall+0x210/0x500 [<00000383059e4c06>] system_call+0x6e/0x90 INFO: lockdep is turned off. ============================= [ BUG: Invalid wait context ] 6.19.0-devel #3 Not tainted ----------------------------- bash/6861 is trying to lock: 0000009da05c7430 (&rc->lock){-.-.}-{3:3}, at: debug_event_common+0xfc/0x300 other info that might help us debug this: context-{5:5} 5 locks held by bash/6861: #0: 000000acff404450 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x7c/0xf0 #1: 000000acff41c490 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x13e/0x260 #2: 0000009da36937d8 (kn->active#75){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x164/0x260 #3: 0000009dd15250d0 (&zdev->state_lock){+.+.}-{4:4}, at: enable_slot+0x2e/0xc0 #4: 000001a19682f708 (pci_lock){....}-{2:2}, at: pci_bus_read_config_byte+0x42/0xa0 stack backtrace: CPU: 16 UID: 0 PID: 6861 Comm: bash Kdump: loaded Not tainted 6.19.0-devel #3 PREEMPTLAZY Hardware name: IBM 9175 ME1 701 (LPAR) Call Trace: [<000001a194837ec2>] dump_stack_lvl+0xa2/0xe8 [<000001a194942166>] __lock_acquire+0x816/0x1660 [<000001a1949431fa>] lock_acquire+0x24a/0x370 [<000001a19596b810>] _raw_spin_lock_irqsave+0x70/0xc0 [<000001a194843b6c>] debug_event_common+0xfc/0x300 [<000001a194888b0a>] __zpci_load+0x17a/0x1f0 [<000001a194882d88>] pci_read+0x88/0xd0 [<000001a195453b88>] pci_bus_read_config_byte+0x68/0xa0 [<000001a195457bc2>] pci_setup_device+0x62/0xad0 [<000001a195458e70>] pci_scan_single_device+0x90/0xe0 [<000001a19488a0f6>] zpci_bus_scan_device+0x46/0x80 [<000001a19547f958>] enable_slot+0x98/0xc0 [<000001a19547f134>] power_write_file+0xc4/0x110 [<000001a194e20758>] kernfs_fop_write_iter+0x1e8/0x260 [<000001a194d215da>] new_sync_write+0x13a/0x180 [<000001a194d245d0>] vfs_write+0x200/0x330 [<000001a194d2488c>] ksys_write+0x7c/0xf0 [<000001a195957a30>] __do_syscall+0x210/0x500 [<000001a19596cbb6>] system_call+0x6e/0x90 INFO: lockdep is turned off. Since it is desired to keep it possible to create trace records in most situations, including this particular case (failing PCI config space accesses are relevant), convert the used spinlock_t in `struct debug_info` to raw_spinlock_t. The impact is small, as the debug area lock only protects bounded memory access without external dependencies, apart from one function debug_set_size() where kfree() is implicitly called with the lock held. Move debug_info_free() out of this lock, to keep remove this external dependency. Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
|
3ee5333fee |
s390/smp: Avoid calling rebuild_sched_domains() early
Since a recent cpuset code change [1] the kernel emits warnings like this:
WARNING: kernel/cgroup/cpuset.c:966 at rebuild_sched_domains_locked+0xe0/0x120, CPU#0: kworker/0:0/9
Modules linked in:
CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.20.0-20260215.rc0.git3.bb7a3fc2c976.300.fc43.s390x+git #1 PREEMPTLAZY
Hardware name: IBM 3931 A01 703 (KVM/Linux)
Workqueue: events topology_work_fn
Krnl PSW : 0704c00180000000 000002922e7af5c4 (rebuild_sched_domains_locked+0xe4/0x120)
...
Call Trace:
[<000002922e7af5c4>] rebuild_sched_domains_locked+0xe4/0x120
[<000002922e7af634>] rebuild_sched_domains+0x34/0x50
[<000002922e6ba232>] process_one_work+0x1b2/0x490
[<000002922e6bc4b8>] worker_thread+0x1f8/0x3b0
[<000002922e6c6a98>] kthread+0x148/0x170
[<000002922e645ffc>] __ret_from_fork+0x3c/0x240
[<000002922f51f492>] ret_from_fork+0xa/0x30
Reason for this is that the s390 specific smp initialization code schedules
a work which rebuilds scheduling domains way before the scheduler is smp
aware. With the mentioned commit the (invalid) rebuild request is not
anymore silently discarded but instead leads to warning.
Address this by avoiding the early rebuild request.
Reported-by: Marc Hartmayer <marc@linux.ibm.com>
Tested-by: Marc Hartmayer <marc@linux.ibm.com>
Fixes:
|
||
|
|
dd3411959b |
s390/kexec: Make KEXEC_SIG available when CONFIG_MODULES=n
The commit |
||
|
|
cb5573868e |
Loongarch:
- Add more CPUCFG mask bits. - Improve feature detection. - Add lazy load support for FPU and binary translation (LBT) register state. - Fix return value for memory reads from and writes to in-kernel devices. - Add support for detecting preemption from within a guest. - Add KVM steal time test case to tools/selftests. ARM: - Add support for FEAT_IDST, allowing ID registers that are not implemented to be reported as a normal trap rather than as an UNDEF exception. - Add sanitisation of the VTCR_EL2 register, fixing a number of UXN/PXN/XN bugs in the process. - Full handling of RESx bits, instead of only RES0, and resulting in SCTLR_EL2 being added to the list of sanitised registers. - More pKVM fixes for features that are not supposed to be exposed to guests. - Make sure that MTE being disabled on the pKVM host doesn't give it the ability to attack the hypervisor. - Allow pKVM's host stage-2 mappings to use the Force Write Back version of the memory attributes by using the "pass-through' encoding. - Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the guest. - Preliminary work for guest GICv5 support. - A bunch of debugfs fixes, removing pointless custom iterators stored in guest data structures. - A small set of FPSIMD cleanups. - Selftest fixes addressing the incorrect alignment of page allocation. - Other assorted low-impact fixes and spelling fixes. RISC-V: - Fixes for issues discoverd by KVM API fuzzing in kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(), and kvm_riscv_vcpu_aia_imsic_update() - Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM - Transparent huge page support for hypervisor page tables - Adjust the number of available guest irq files based on MMIO register sizes found in the device tree or the ACPI tables - Add RISC-V specific paging modes to KVM selftests - Detect paging mode at runtime for selftests s390: - Performance improvement for vSIE (aka nested virtualization) - Completely new memory management. s390 was a special snowflake that enlisted help from the architecture's page table management to build hypervisor page tables, in particular enabling sharing the last level of page tables. This however was a lot of code (~3K lines) in order to support KVM, and also blocked several features. The biggest advantages is that the page size of userspace is completely independent of the page size used by the guest: userspace can mix normal pages, THPs and hugetlbfs as it sees fit, and in fact transparent hugepages were not possible before. It's also now possible to have nested guests and guests with huge pages running on the same host. - Maintainership change for s390 vfio-pci - Small quality of life improvement for protected guests x86: - Add support for giving the guest full ownership of PMU hardware (contexted switched around the fastpath run loop) and allowing direct access to data MSRs and PMCs (restricted by the vPMU model). KVM still intercepts access to control registers, e.g. to enforce event filtering and to prevent the guest from profiling sensitive host state. This is more accurate, since it has no risk of contention and thus dropped events, and also has significantly less overhead. For more information, see the commit message for merge commit |
||
|
|
136114e0ab |
mm.git review status for linus..mm-nonmm-stable
Total patches: 107 Reviews/patch: 1.07 Reviewed rate: 67% - The 2 patch series "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" from Heming Zhao saves disk space by teaching ocfs2 to reclaim suballocator block group space. - The 4 patch series "Add ARRAY_END(), and use it to fix off-by-one bugs" from Alejandro Colomar adds the ARRAY_END() macro and uses it in various places. - The 2 patch series "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" from Pnina Feder makes the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the page size. - The 7 patch series "kallsyms: Prevent invalid access when showing module buildid" from Petr Mladek cleans up kallsyms code related to module buildid and fixes an invalid access crash when printing backtraces. - The 3 patch series "Address page fault in ima_restore_measurement_list()" from Harshit Mogalapalli fixes a kexec-related crash that can occur when booting the second-stage kernel on x86. - The 6 patch series "kho: ABI headers and Documentation updates" from Mike Rapoport updates the kexec handover ABI documentation. - The 4 patch series "Align atomic storage" from Finn Thain adds the __aligned attribute to atomic_t and atomic64_t definitions to get natural alignment of both types on csky, m68k, microblaze, nios2, openrisc and sh. - The 2 patch series "kho: clean up page initialization logic" from Pratyush Yadav simplifies the page initialization logic in kho_restore_page(). - The 6 patch series "Unload linux/kernel.h" from Yury Norov moves several things out of kernel.h and into more appropriate places. - The 7 patch series "don't abuse task_struct.group_leader" from Oleg Nesterov removes the usage of ->group_leader when it is "obviously unnecessary". - The 5 patch series "list private v2 & luo flb" from Pasha Tatashin adds some infrastructure improvements to the live update orchestrator. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY4giAAKCRDdBJ7gKXxA jgusAQDnKkP8UWTqXPC1jI+OrDJGU5ciAx8lzLeBVqMKzoYk9AD/TlhT2Nlx+Ef6 0HCUHUD0FMvAw/7/Dfc6ZKxwBEIxyww= =mmsH -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves disk space by teaching ocfs2 to reclaim suballocator block group space (Heming Zhao) - "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the ARRAY_END() macro and uses it in various places (Alejandro Colomar) - "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the page size (Pnina Feder) - "kallsyms: Prevent invalid access when showing module buildid" cleans up kallsyms code related to module buildid and fixes an invalid access crash when printing backtraces (Petr Mladek) - "Address page fault in ima_restore_measurement_list()" fixes a kexec-related crash that can occur when booting the second-stage kernel on x86 (Harshit Mogalapalli) - "kho: ABI headers and Documentation updates" updates the kexec handover ABI documentation (Mike Rapoport) - "Align atomic storage" adds the __aligned attribute to atomic_t and atomic64_t definitions to get natural alignment of both types on csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain) - "kho: clean up page initialization logic" simplifies the page initialization logic in kho_restore_page() (Pratyush Yadav) - "Unload linux/kernel.h" moves several things out of kernel.h and into more appropriate places (Yury Norov) - "don't abuse task_struct.group_leader" removes the usage of ->group_leader when it is "obviously unnecessary" (Oleg Nesterov) - "list private v2 & luo flb" adds some infrastructure improvements to the live update orchestrator (Pasha Tatashin) * tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits) watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency procfs: fix missing RCU protection when reading real_parent in do_task_stat() watchdog/softlockup: fix sample ring index wrap in need_counting_irqs() kcsan, compiler_types: avoid duplicate type issues in BPF Type Format kho: fix doc for kho_restore_pages() tests/liveupdate: add in-kernel liveupdate test liveupdate: luo_flb: introduce File-Lifecycle-Bound global state liveupdate: luo_file: Use private list list: add kunit test for private list primitives list: add primitives for private list manipulations delayacct: fix uapi timespec64 definition panic: add panic_force_cpu= parameter to redirect panic to a specific CPU netclassid: use thread_group_leader(p) in update_classid_task() RDMA/umem: don't abuse current->group_leader drm/pan*: don't abuse current->group_leader drm/amd: kill the outdated "Only the pthreads threading model is supported" checks drm/amdgpu: don't abuse current->group_leader android/binder: use same_thread_group(proc->tsk, current) in binder_mmap() android/binder: don't abuse current->group_leader kho: skip memoryless NUMA nodes when reserving scratch areas ... |
||
|
|
4cff5c05e0 |
mm.git review status for linus..mm-stable
Everything:
Total patches: 325
Reviews/patch: 1.39
Reviewed rate: 72%
Excluding DAMON:
Total patches: 262
Reviews/patch: 1.63
Reviewed rate: 82%
Excluding DAMON and zram:
Total patches: 248
Reviews/patch: 1.72
Reviewed rate: 86%
- The 14 patch series "powerpc/64s: do not re-activate batched TLB
flush" from Alexander Gordeev makes arch_{enter|leave}_lazy_mmu_mode()
nest properly.
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- The 7 patch series "zram: introduce compressed data writeback" from
Richard Chang and Sergey Senozhatsky implements data compression for
zram writeback.
- The 8 patch series "mm: folio_zero_user: clear page ranges" from David
Hildenbrand adds clearing of contiguous page ranges for hugepages.
Large improvements during demand faulting are demonstrated.
- The 2 patch series "memcg cleanups" from Chen Ridong tideis up some
memcg code.
- The 12 patch series "mm/damon: introduce {,max_}nr_snapshots and
tracepoint for damos stats" from SeongJae Park improves DAMOS stat's
provided information, deterministic control, and readability.
- The 3 patch series "selftests/mm: hugetlb cgroup charging: robustness
fixes" from Li Wang fixes a few issues in the hugetlb cgroup charging
selftests.
- The 5 patch series "Fix va_high_addr_switch.sh test failure - again"
from Chunyu Hu addresses several issues in the va_high_addr_switch test.
- The 5 patch series "mm/damon/tests/core-kunit: extend existing test
scenarios" from Shu Anzai improves the KUnit test coverage for DAMON.
- The 2 patch series "mm/khugepaged: fix dirty page handling for
MADV_COLLAPSE" from Shivank Garg fixes a glitch in khugepaged which was
causing madvise(MADV_COLLAPSE) to transiently return -EAGAIN.
- The 29 patch series "arch, mm: consolidate hugetlb early reservation"
from Mike Rapoport reworks and consolidates a pile of straggly code
related to reservation of hugetlb memory from bootmem and creation of
CMA areas for hugetlb.
- The 9 patch series "mm: clean up anon_vma implementation" from Lorenzo
Stoakes cleans up the anon_vma implementation in various ways.
- The 3 patch series "tweaks for __alloc_pages_slowpath()" from
Vlastimil Babka does a little streamlining of the page allocator's
slowpath code.
- The 8 patch series "memcg: separate private and public ID namespaces"
from Shakeel Butt cleans up the memcg ID code and prevents the
internal-only private IDs from being exposed to userspace.
- The 6 patch series "mm: hugetlb: allocate frozen gigantic folio" from
Kefeng Wang cleans up the allocation of frozen folios and avoids some
atomic refcount operations.
- The 11 patch series "mm/damon: advance DAMOS-based LRU sorting" from
SeongJae Park improves DAMOS's movement of memory betewwn the active and
inactive LRUs and adds auto-tuning of the ratio-based quotas and of
monitoring intervals.
- The 18 patch series "Support page table check on PowerPC" from Andrew
Donnellan makes CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc.
- The 3 patch series "nodemask: align nodes_and{,not} with underlying
bitmap ops" from Yury Norov makes nodes_and() and nodes_andnot()
propagate the return values from the underlying bit operations, enabling
some cleanup in calling code.
- The 5 patch series "mm/damon: hide kdamond and kdamond_lock from API
callers" from SeongJae Park cleans up some DAMON internal interfaces.
- The 4 patch series "mm/khugepaged: cleanups and scan limit fix" from
Shivank Garg does some cleanup work in khupaged and fixes a scan limit
accounting issue.
- The 24 patch series "mm: balloon infrastructure cleanups" from David
Hildenbrand goes to town on the balloon infrastructure and its page
migration function. Mainly cleanups, also some locking simplification.
- The 2 patch series "mm/vmscan: add tracepoint and reason for
kswapd_failures reset" from Jiayuan Chen adds additional tracepoints to
the page reclaim code.
- The 3 patch series "Replace wq users and add WQ_PERCPU to
alloc_workqueue() users" from Marco Crivellari is part of Marco's
kernel-wide migration from the legacy workqueue APIs over to the
preferred unbound workqueues.
- The 9 patch series "Various mm kselftests improvements/fixes" from
Kevin Brodsky provides various unrelated improvements/fixes for the mm
kselftests.
- The 5 patch series "mm: accelerate gigantic folio allocation" from
Kefeng Wang greatly speeds up gigantic folio allocation, mainly by
avoiding unnecessary work in pfn_range_valid_contig().
- The 5 patch series "selftests/damon: improve leak detection and wss
estimation reliability" from SeongJae Park improves the reliability of
two of the DAMON selftests.
- The 8 patch series "mm/damon: cleanup kdamond, damon_call(), damos
filter and DAMON_MIN_REGION" from SeongJae Park does some cleanup work
in the core DAMON code.
- The 8 patch series "Docs/mm/damon: update intro, modules, maintainer
profile, and misc" from SeongJae Park performs maintenance work on the
DAMON documentation.
- The 10 patch series "mm: add and use vma_assert_stabilised() helper"
from Lorenzo Stoakes refactors and cleans up the core VMA code. The
main aim here is to be able to use the mmap write lock's lockdep state
to perform various assertions regarding the locking which the VMA code
requires.
- The 19 patch series "mm, swap: swap table phase II: unify swapin use"
from Kairui Song removes some old swap code (swap cache bypassing and
swap synchronization) which wasn't working very well. Various other
cleanups and simplifications were made. The end result is a 20% speedup
in one benchmark.
- The 8 patch series "enable PT_RECLAIM on more 64-bit architectures"
from Qi Zheng makes PT_RECLAIM available on 64-bit alpha, loongarch,
mips, parisc, um, Various cleanups were performed along the way.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY1HfAAKCRDdBJ7gKXxA
jqhZAP9H8ZlKKqCEgnr6U5XXmJ63Ep2FDQpl8p35yr9yVuU9+gEAgfyWiJ43l1fP
rT0yjsUW3KQFBi/SEA3R6aYarmoIBgI=
=+HLt
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
|
||
|
|
37a93dd5c4 |
Networking changes for 7.0
Core & protocols
----------------
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls for
small helper and stack canary overhead in the fast-path. This
generates better and faster code with very small or no text size
increases, as in many cases the call generated more code than the
actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage by
up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the RX
path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without the
HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified, aligning
IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the rate
shaper of sch_cake across multiple CPUs, while still enforcing a
single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations that
are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information, saving
cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most protocols,
avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies between
the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes back
online.
Driver API
----------
- Support for switching the working mode (automatic vs manual) of a DPLL
device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties, to
generalize polarity inversion requirements for differential signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers
--------------
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram and
NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the used
H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO, leading to
12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN metadata
access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support
multi-wiphy devices and and pave the way for future device support
in the same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=O31Y
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
|
||
|
|
b1195183ed |
- gmap rewrite: completely new memory management for kvm/s390
- vSIE improvement - maintainership change for s390 vfio-pci - small quality of life improvement for protected guests -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEoWuZBM6M3lCBSfTnuARItAMU6BMFAmmLOKAACgkQuARItAMU 6BOkhQ/9G0Sr1bfkcSQvbszvjSoDsOCSm+oAm39679Dr4v+7SsItknTutYK0M7dM n6oY2kU1dveFsF0FwBAALh4LC0lYNEmz34eHxaFPFfgqQ9lX2fBAQuBSPq8uOz1L Pk6IIlqTls8TAvKF/KqTXCEULnPGVXD2KP4WaSir+T2vZr6N/mqB7cZPR23/rMAi +PF/UtmgbfG+eRjqA8QRdm8nnzTrM5cWe9roZXYsAXDLZh+EYYeG4d96GFTV8udY /6mV1YKP0Aa+youC5p4oIh1Iv7p/Yjv6RxPoEbW1O31M9yBDJmFpz4W5C/rdkzwI nOjQj9i7ZINXf83kAZMvFb8MdXlJzaw8rBUlWzxNfrsL4ga8Rp3xMNEdufWd3T5x zNFXr0ANuBifi0B0EasBWlYDRbK4WGAC4vnkgmxqP5t2JiAN+d0FXB8LaRyZvgs/ tiwEDenCk1eDWEBcWbLnX7fGGDKDUNXVMAFTrGM1BMNZe6/IL/h/sypLuYSJ/d3Y VXDgZZyAWUVqjidDxrwurdjyzvbPd69GDbKjhTuUu4OdqUMucjjQf74w6m857Wn/ 9oLoR0p+8deb1SQ2RuB8sujcJiO9YHczwL8PLDa+bGw3jH6TRiMVVrt1HOw5QmfG QpwhKvrF2yPTgv5VZbFvYEvtITnBBfaepQe97pDDEfsHqPeStmI= =2eiy -----END PGP SIGNATURE----- Merge tag 'kvm-s390-next-7.0-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD - gmap rewrite: completely new memory management for kvm/s390 - vSIE improvement - maintainership change for s390 vfio-pci - small quality of life improvement for protected guests |
||
|
|
f1c538ca81 |
Updates for the VDSO subsystem:
- Provide the missing 64-bit variant of clock_getres()
This allows the extension of CONFIG_COMPAT_32BIT_TIME to the vDSO and
finally the removal of 32-bit time types from the kernel and UAPI.
- Remove the useless and broken getcpu_cache from the VDSO
The intention was to provide a trivial way to retrieve the CPU number from
the VDSO, but as the VDSO data is per process there is no way to make it
work.
- Switch get/put_unaligned() from packed struct to memcpy()
The packed struct violates strict aliasing rules which requires to pass
-fno-strict-aliasing to the compiler. As this are scalar values
__builtin_memcpy() turns them into simple loads and stores
- Use __typeof_unqual__() for __unqual_scalar_typeof()
The get/put_unaligned() changes triggered a new sparse warning when __beNN
types are used with get/put_unaligned() as sparse builds add a special
'bitwise' attribute to them which prevents sparse to evaluate the Generic
in __unqual_scalar_typeof().
Newer sparse versions support __typeof_unqual__() which avoids the problem,
but requires a recent sparse install. So this adds a sanity check to sparse
builds, which validates that sparse is available and capable of handling it.
- Force inline __cvdso_clock_getres_common()
Compilers sometimes un-inline agressively, which results in function call
overhead and problems with automatic stack variable initialization.
Interestingly enough the force inlining results in smaller code than the
un-inlined variant produced by GCC when optimizing for size.
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmmJ2eAQHHRnbHhAa2Vy
bmVsLm9yZwAKCRCmGPVMDXSYoXhQD/4mjneVlRBbQ6Nt9LxxhzPlYXvED6u8b4SX
R//DQ4qqqagh2fSpE57tr3f56HqhUmXptGJSgEvr6tVKoyugsLqP6sN9J9J3o181
jnPQR0VBP9dihQZ5X93pKo9NZWxLIn0uLD0RsdCbE9NTx4ciw4VIPFYQqkC4Rw6b
jiRrDR2l8EhV8cmxB6puW5WaQ932M6Awabw9RumzwH3MzIIlbc5Ero51S9eS64LL
byU5XeWUe295W1Gxze5RHHJWyNQEyx1eUCFfe3LWvfpz7FMzc2AQsKnIJDzW3GiO
UGu5MGptbLpG+ccvhVEs6/Ls5pWXcoCw4WuDNAunCCOmqda98oDniKf2LwRRbLT0
nAfLNatMnhXdTPk2zbS45z9uipUQAGKmVAE3/LVqB+ekcutmIGMyqHgR75QX0b4l
CQPkC9rBsV6gGsScWTnhRydhqioNO/uhhrQv0vEXnKZa0ysTbgZKt3JDZbgUEL2B
uDxXKyrqjpnqDZKlMMaoLtwd+l+T80ya4/NhHd4ZNGUpTUrHVw2H47lgE7ahCxEk
/SvXTZSU4Jp8sVQIQ+J6y5z2AQ/xGy++zvNKiZMyP9fQuPqhiDqYkLpmOp61bARx
wqyVsfGXZYSB1l16AiSC/CyUDcMqqsFohGXQ/Yf0SOiVtXu2WUyfofY1N0IXIGu4
WOVV9mH1yg==
=0ogX
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO updates from Thomas Gleixner:
- Provide the missing 64-bit variant of clock_getres()
This allows the extension of CONFIG_COMPAT_32BIT_TIME to the vDSO and
finally the removal of 32-bit time types from the kernel and UAPI.
- Remove the useless and broken getcpu_cache from the VDSO
The intention was to provide a trivial way to retrieve the CPU number
from the VDSO, but as the VDSO data is per process there is no way to
make it work.
- Switch get/put_unaligned() from packed struct to memcpy()
The packed struct violates strict aliasing rules which requires to
pass -fno-strict-aliasing to the compiler. As this are scalar values
__builtin_memcpy() turns them into simple loads and stores
- Use __typeof_unqual__() for __unqual_scalar_typeof()
The get/put_unaligned() changes triggered a new sparse warning when
__beNN types are used with get/put_unaligned() as sparse builds add a
special 'bitwise' attribute to them which prevents sparse to evaluate
the Generic in __unqual_scalar_typeof().
Newer sparse versions support __typeof_unqual__() which avoids the
problem, but requires a recent sparse install. So this adds a sanity
check to sparse builds, which validates that sparse is available and
capable of handling it.
- Force inline __cvdso_clock_getres_common()
Compilers sometimes un-inline agressively, which results in function
call overhead and problems with automatic stack variable
initialization.
Interestingly enough the force inlining results in smaller code than
the un-inlined variant produced by GCC when optimizing for size.
* tag 'timers-vdso-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vdso/gettimeofday: Force inlining of __cvdso_clock_getres_common()
x86/percpu: Make CONFIG_USE_X86_SEG_SUPPORT work with sparse
compiler: Use __typeof_unqual__() for __unqual_scalar_typeof()
powerpc/vdso: Provide clock_getres_time64()
tools headers: Remove unneeded ignoring of warnings in unaligned.h
tools headers: Update the linux/unaligned.h copy with the kernel sources
vdso: Switch get/put_unaligned() from packed struct to memcpy()
parisc: Inline a type punning version of get_unaligned_le32()
vdso: Remove struct getcpu_cache
MIPS: vdso: Provide getres_time64() for 32-bit ABIs
arm64: vdso32: Provide clock_getres_time64()
ARM: VDSO: Provide clock_getres_time64()
ARM: VDSO: Patch out __vdso_clock_getres() if unavailable
x86/vdso: Provide clock_getres_time64() for x86-32
selftests: vDSO: vdso_test_abi: Add test for clock_getres_time64()
selftests: vDSO: vdso_test_abi: Use UAPI system call numbers
selftests: vDSO: vdso_config: Add configurations for clock_getres_time64()
vdso: Add prototype for __vdso_clock_getres_time64()
|
||
|
|
36ae1c45b2 |
Scheduler changes for v7.0:
Scheduler Kconfig space updates:
- Further consolidate configurable preemption modes: reduce
the number of architectures that are allowed to offer
PREEMPT_NONE and PREEMPT_VOLUNTARY, reducing the number
of preemption models from four to just two: 'full' and 'lazy'
on up-to-date architectures (arm64, loongarch, powerpc,
riscv, s390, x86).
None and voluntary are only available as legacy features
on platforms that don't implement lazy preemption yet,
or which don't even support preemption.
The goal is to eventually remove cond_resched() and
voluntary preemption altogether.
(Peter Zijlstra)
RSEQ based 'scheduler time slice extension' support:
This allows a thread to request a time slice extension when it
enters a critical section to avoid contention on a resource when
the thread is scheduled out inside of the critical section.
- Add fields and constants for time slice extension
- Provide static branch for time slice extensions
- Add statistics for time slice extensions
- Add prctl() to enable time slice extensions
- Implement sys_rseq_slice_yield()
- Implement syscall entry work for time slice extensions
- Implement time slice extension enforcement timer
- Reset slice extension when scheduled
- Implement rseq_grant_slice_extension()
- entry: Hook up rseq time slice extension
- selftests: Implement time slice extension test
(Thomas Gleixner)
- Allow registering RSEQ with slice extension
- Move slice_ext_nsec to debugfs
- Lower default slice extension
- selftests/rseq: Add rseq slice histogram script
(Peter Zijlstra)
Scheduler performance/scalability improvements:
- Update rq->avg_idle when a task is moved to an idle CPU,
which improves the scalability of various workloads.
(Shubhang Kaushik)
- Reorder fields in 'struct rq' for better caching
(Blake Jones)
- Fair scheduler SMP NOHZ balancing code speedups:
- Move checking for nohz cpus after time check
- Change likelyhood of nohz.nr_cpus
- Remove nohz.nr_cpus and use weight of cpumask instead
(Shrikanth Hegde)
- Avoid false sharing for sched_clock_irqtime (Wangyang Guo)
- Drop useless cpumask_empty() in find_energy_efficient_cpu()
- Simplify task_numa_find_cpu()
- Use cpumask_weight_and() in sched_balance_find_dst_group()
(Yury Norov)
DL scheduler updates:
- Add a deadline server for sched_ext tasks (by Andrea Righi and
Joel Fernandes, with fixes by Peter Zijlstra)
RT scheduler updates:
- Skip currently executing CPU in rto_next_cpu() (Chen Jinghuang)
Entry code updates and performance improvements, which is part of the
scheduler tree in this cycle due to interdependencies with the RSEQ
based time slice extension work:
- Remove unused syscall argument from syscall_trace_enter()
- Rework syscall_exit_to_user_mode_work() for architecture reuse
- Add arch_ptrace_report_syscall_entry/exit()
- Inline syscall_exit_work() and syscall_trace_enter()
(Jinjie Ruan)
Scheduler core updates:
- Rework sched_class::wakeup_preempt() and rq_modified_*()
- Avoid rq->lock bouncing in sched_balance_newidle()
- Rename rcu_dereference_check_sched_domain() =>
rcu_dereference_sched_domain()
- <linux/compiler_types.h>: Add the __signed_scalar_typeof() helper
(Peter Zijlstra)
Fair scheduler updates/refactoring:
- Fold the sched_avg update
- Change rcu_dereference_check_sched_domain() to rcu-sched
- Switch to rcu_dereference_all()
- Remove superfluous rcu_read_lock()
- Limit hrtick work
(Peter Zijlstra)
- Join two #ifdef CONFIG_FAIR_GROUP_SCHED blocks
- Clean up comments in 'struct cfs_rq'
- Separate se->vlag from se->vprot
- Rename cfs_rq::avg_load to cfs_rq::sum_weight
- Rename cfs_rq::avg_vruntime to ::sum_w_vruntime & helper functions
- Introduce and use the vruntime_cmp() and vruntime_op() wrappers
for wrapped-signed aritmetics
- Sort out 'blocked_load*' namespace noise
(Ingo Molnar)
Scheduler debugging code updates:
- Export hidden tracepoints to modules (Gabriele Monaco)
- Convert copy_from_user() + kstrtouint() to kstrtouint_from_user()
(Fushuai Wang)
- Add assertions to QUEUE_CLASS (Peter Zijlstra)
- hrtimer: Fix tracing oddity (Thomas Gleixner)
Misc fixes and cleanups:
- Re-evaluate scheduling when migrating queued tasks out of
throttled cgroups (Zicheng Qu)
- Remove task_struct->faults_disabled_mapping (Christoph Hellwig)
- Fix math notation errors in avg_vruntime comment (Zhan Xusheng)
- sched/cpufreq: Use %pe format for PTR_ERR() printing (zenghongling)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Xj2f
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scheduler Kconfig space updates:
- Further consolidate configurable preemption modes (Peter Zijlstra)
Reduce the number of architectures that are allowed to offer
PREEMPT_NONE and PREEMPT_VOLUNTARY, reducing the number of
preemption models from four to just two: 'full' and 'lazy' on
up-to-date architectures (arm64, loongarch, powerpc, riscv, s390,
x86).
None and voluntary are only available as legacy features on
platforms that don't implement lazy preemption yet, or which don't
even support preemption.
The goal is to eventually remove cond_resched() and voluntary
preemption altogether.
RSEQ based 'scheduler time slice extension' support (Thomas Gleixner
and Peter Zijlstra):
This allows a thread to request a time slice extension when it enters
a critical section to avoid contention on a resource when the thread
is scheduled out inside of the critical section.
- Add fields and constants for time slice extension
- Provide static branch for time slice extensions
- Add statistics for time slice extensions
- Add prctl() to enable time slice extensions
- Implement sys_rseq_slice_yield()
- Implement syscall entry work for time slice extensions
- Implement time slice extension enforcement timer
- Reset slice extension when scheduled
- Implement rseq_grant_slice_extension()
- entry: Hook up rseq time slice extension
- selftests: Implement time slice extension test
- Allow registering RSEQ with slice extension
- Move slice_ext_nsec to debugfs
- Lower default slice extension
- selftests/rseq: Add rseq slice histogram script
Scheduler performance/scalability improvements:
- Update rq->avg_idle when a task is moved to an idle CPU, which
improves the scalability of various workloads (Shubhang Kaushik)
- Reorder fields in 'struct rq' for better caching (Blake Jones)
- Fair scheduler SMP NOHZ balancing code speedups (Shrikanth Hegde):
- Move checking for nohz cpus after time check
- Change likelyhood of nohz.nr_cpus
- Remove nohz.nr_cpus and use weight of cpumask instead
- Avoid false sharing for sched_clock_irqtime (Wangyang Guo)
- Cleanups (Yury Norov):
- Drop useless cpumask_empty() in find_energy_efficient_cpu()
- Simplify task_numa_find_cpu()
- Use cpumask_weight_and() in sched_balance_find_dst_group()
DL scheduler updates:
- Add a deadline server for sched_ext tasks (by Andrea Righi and Joel
Fernandes, with fixes by Peter Zijlstra)
RT scheduler updates:
- Skip currently executing CPU in rto_next_cpu() (Chen Jinghuang)
Entry code updates and performance improvements (Jinjie Ruan)
This is part of the scheduler tree in this cycle due to inter-
dependencies with the RSEQ based time slice extension work:
- Remove unused syscall argument from syscall_trace_enter()
- Rework syscall_exit_to_user_mode_work() for architecture reuse
- Add arch_ptrace_report_syscall_entry/exit()
- Inline syscall_exit_work() and syscall_trace_enter()
Scheduler core updates (Peter Zijlstra):
- Rework sched_class::wakeup_preempt() and rq_modified_*()
- Avoid rq->lock bouncing in sched_balance_newidle()
- Rename rcu_dereference_check_sched_domain() =>
rcu_dereference_sched_domain()
- <linux/compiler_types.h>: Add the __signed_scalar_typeof() helper
Fair scheduler updates/refactoring (Peter Zijlstra and Ingo Molnar):
- Fold the sched_avg update
- Change rcu_dereference_check_sched_domain() to rcu-sched
- Switch to rcu_dereference_all()
- Remove superfluous rcu_read_lock()
- Limit hrtick work
- Join two #ifdef CONFIG_FAIR_GROUP_SCHED blocks
- Clean up comments in 'struct cfs_rq'
- Separate se->vlag from se->vprot
- Rename cfs_rq::avg_load to cfs_rq::sum_weight
- Rename cfs_rq::avg_vruntime to ::sum_w_vruntime & helper functions
- Introduce and use the vruntime_cmp() and vruntime_op() wrappers for
wrapped-signed aritmetics
- Sort out 'blocked_load*' namespace noise
Scheduler debugging code updates:
- Export hidden tracepoints to modules (Gabriele Monaco)
- Convert copy_from_user() + kstrtouint() to kstrtouint_from_user()
(Fushuai Wang)
- Add assertions to QUEUE_CLASS (Peter Zijlstra)
- hrtimer: Fix tracing oddity (Thomas Gleixner)
Misc fixes and cleanups:
- Re-evaluate scheduling when migrating queued tasks out of throttled
cgroups (Zicheng Qu)
- Remove task_struct->faults_disabled_mapping (Christoph Hellwig)
- Fix math notation errors in avg_vruntime comment (Zhan Xusheng)
- sched/cpufreq: Use %pe format for PTR_ERR() printing
(zenghongling)"
* tag 'sched-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
sched: Re-evaluate scheduling when migrating queued tasks out of throttled cgroups
sched/cpufreq: Use %pe format for PTR_ERR() printing
sched/rt: Skip currently executing CPU in rto_next_cpu()
sched/clock: Avoid false sharing for sched_clock_irqtime
selftests/sched_ext: Add test for DL server total_bw consistency
selftests/sched_ext: Add test for sched_ext dl_server
sched/debug: Fix dl_server (re)start conditions
sched/debug: Add support to change sched_ext server params
sched_ext: Add a DL server for sched_ext tasks
sched/debug: Stop and start server based on if it was active
sched/debug: Fix updating of ppos on server write ops
sched/deadline: Clear the defer params
entry: Inline syscall_exit_work() and syscall_trace_enter()
entry: Add arch_ptrace_report_syscall_entry/exit()
entry: Rework syscall_exit_to_user_mode_work() for architecture reuse
entry: Remove unused syscall argument from syscall_trace_enter()
sched: remove task_struct->faults_disabled_mapping
sched: Update rq->avg_idle when a task is moved to an idle CPU
selftests/rseq: Add rseq slice histogram script
hrtimer: Fix trace oddity
...
|
||
|
|
4d84667627 |
Performance events changes for v7.0:
x86 PMU driver updates:
- Add support for the core PMU for Intel Diamond Rapids (DMR) CPUs.
Compared to previous iterations of the Intel PMU code, there's
been a lot of changes, which center around three main areas:
- Introduce the OFF-MODULE RESPONSE (OMR) facility to
replace the Off-Core Response (OCR) facility
- New PEBS data source encoding layout
- Support the new "RDPMC user disable" feature
(Dapeng Mi)
- Likewise, a large series adds uncore PMU support for
Intel Diamond Rapids (DMR) CPUs, which center around these
four main areas:
- DMR may have two Integrated I/O and Memory Hub (IMH) dies,
separate from the compute tile (CBB) dies. Each CBB and
each IMH die has its own discovery domain.
- Unlike prior CPUs that retrieve the global discovery table
portal exclusively via PCI or MSR, DMR uses PCI for IMH PMON
discovery and MSR for CBB PMON discovery.
- DMR introduces several new PMON types: SCA, HAMVF, D2D_ULA,
UBR, PCIE4, CRS, CPC, ITC, OTC, CMS, and PCIE6.
- IIO free-running counters in DMR are MMIO-based, unlike SPR.
(Zide Chen)
- Also add support for Add missing PMON units for Intel Panther Lake,
and support Nova Lake (NVL), which largely maps to Panther Lake.
(Zide Chen)
- KVM integration: Add support for mediated vPMUs (by Kan Liang
and Sean Christopherson, with fixes and cleanups by Peter Zijlstra,
Sandipan Das and Mingwei Zhang)
- Add Intel cstate driver to support for Wildcat Lake (WCL)
CPUs, which are a low-power variant of Panther Lake.
(Zide Chen)
- Add core, cstate and MSR PMU support for the Airmont NP Intel CPU
(aka MaxLinear Lightning Mountain), which maps to the existing
Airmont code. (Martin Schiller)
Performance enhancements:
- core: Speed up kexec shutdown by avoiding unnecessary
cross CPU calls. (Jan H. Schönherr)
- core: Fix slow perf_event_task_exit() with LBR callstacks
(Namhyung Kim)
User-space stack unwinding support:
- Various cleanups and refactorings in preparation to generalize
the unwinding code for other architectures. (Jens Remus)
Uprobes updates:
- Transition from kmap_atomic to kmap_local_page (Keke Ming)
- Fix incorrect lockdep condition in filter_chain() (Breno Leitao)
- Fix XOL allocation failure for 32-bit tasks (Oleg Nesterov)
Misc fixes and cleanups:
- s390: Remove kvm_types.h from Kbuild (Randy Dunlap)
- x86/intel/uncore: Convert comma to semicolon (Chen Ni)
- x86/uncore: Clean up const mismatch (Greg Kroah-Hartman)
- x86/ibs: Fix typo in dc_l2tlb_miss comment (Xiang-Bin Shi)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=4SRB
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance event updates from Ingo Molnar:
"x86 PMU driver updates:
- Add support for the core PMU for Intel Diamond Rapids (DMR) CPUs
(Dapeng Mi)
Compared to previous iterations of the Intel PMU code, there's been
a lot of changes, which center around three main areas:
- Introduce the OFF-MODULE RESPONSE (OMR) facility to replace the
Off-Core Response (OCR) facility
- New PEBS data source encoding layout
- Support the new "RDPMC user disable" feature
- Likewise, a large series adds uncore PMU support for Intel Diamond
Rapids (DMR) CPUs (Zide Chen)
This centers around these four main areas:
- DMR may have two Integrated I/O and Memory Hub (IMH) dies,
separate from the compute tile (CBB) dies. Each CBB and each IMH
die has its own discovery domain.
- Unlike prior CPUs that retrieve the global discovery table
portal exclusively via PCI or MSR, DMR uses PCI for IMH PMON
discovery and MSR for CBB PMON discovery.
- DMR introduces several new PMON types: SCA, HAMVF, D2D_ULA, UBR,
PCIE4, CRS, CPC, ITC, OTC, CMS, and PCIE6.
- IIO free-running counters in DMR are MMIO-based, unlike SPR.
- Also add support for Add missing PMON units for Intel Panther Lake,
and support Nova Lake (NVL), which largely maps to Panther Lake.
(Zide Chen)
- KVM integration: Add support for mediated vPMUs (by Kan Liang and
Sean Christopherson, with fixes and cleanups by Peter Zijlstra,
Sandipan Das and Mingwei Zhang)
- Add Intel cstate driver to support for Wildcat Lake (WCL) CPUs,
which are a low-power variant of Panther Lake (Zide Chen)
- Add core, cstate and MSR PMU support for the Airmont NP Intel CPU
(aka MaxLinear Lightning Mountain), which maps to the existing
Airmont code (Martin Schiller)
Performance enhancements:
- Speed up kexec shutdown by avoiding unnecessary cross CPU calls
(Jan H. Schönherr)
- Fix slow perf_event_task_exit() with LBR callstacks (Namhyung Kim)
User-space stack unwinding support:
- Various cleanups and refactorings in preparation to generalize the
unwinding code for other architectures (Jens Remus)
Uprobes updates:
- Transition from kmap_atomic to kmap_local_page (Keke Ming)
- Fix incorrect lockdep condition in filter_chain() (Breno Leitao)
- Fix XOL allocation failure for 32-bit tasks (Oleg Nesterov)
Misc fixes and cleanups:
- s390: Remove kvm_types.h from Kbuild (Randy Dunlap)
- x86/intel/uncore: Convert comma to semicolon (Chen Ni)
- x86/uncore: Clean up const mismatch (Greg Kroah-Hartman)
- x86/ibs: Fix typo in dc_l2tlb_miss comment (Xiang-Bin Shi)"
* tag 'perf-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
s390: remove kvm_types.h from Kbuild
uprobes: Fix incorrect lockdep condition in filter_chain()
x86/ibs: Fix typo in dc_l2tlb_miss comment
x86/uprobes: Fix XOL allocation failure for 32-bit tasks
perf/x86/intel/uncore: Convert comma to semicolon
perf/x86/intel: Add support for rdpmc user disable feature
perf/x86: Use macros to replace magic numbers in attr_rdpmc
perf/x86/intel: Add core PMU support for Novalake
perf/x86/intel: Add support for PEBS memory auxiliary info field in NVL
perf/x86/intel: Add core PMU support for DMR
perf/x86/intel: Add support for PEBS memory auxiliary info field in DMR
perf/x86/intel: Support the 4 new OMR MSRs introduced in DMR and NVL
perf/core: Fix slow perf_event_task_exit() with LBR callstacks
perf/core: Speed up kexec shutdown by avoiding unnecessary cross CPU calls
uprobes: use kmap_local_page() for temporary page mappings
arm/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
mips/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
arm64/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
riscv/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
perf/x86/intel/uncore: Add Nova Lake support
...
|
||
|
|
08df88fa14 |
This update includes the following changes:
API:
- Fix race condition in hwrng core by using RCU.
Algorithms:
- Allow authenc(sha224,rfc3686) in fips mode.
- Add test vectors for authenc(hmac(sha384),cbc(aes)).
- Add test vectors for authenc(hmac(sha224),cbc(aes)).
- Add test vectors for authenc(hmac(md5),cbc(des3_ede)).
- Add lz4 support in hisi_zip.
- Only allow clear key use during self-test in s390/{phmac,paes}.
Drivers:
- Set rng quality to 900 in airoha.
- Add gcm(aes) support for AMD/Xilinx Versal device.
- Allow tfms to share device in hisilicon/trng.
-----BEGIN PGP SIGNATURE-----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=n4fL
-----END PGP SIGNATURE-----
Merge tag 'v7.0-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Fix race condition in hwrng core by using RCU
Algorithms:
- Allow authenc(sha224,rfc3686) in fips mode
- Add test vectors for authenc(hmac(sha384),cbc(aes))
- Add test vectors for authenc(hmac(sha224),cbc(aes))
- Add test vectors for authenc(hmac(md5),cbc(des3_ede))
- Add lz4 support in hisi_zip
- Only allow clear key use during self-test in s390/{phmac,paes}
Drivers:
- Set rng quality to 900 in airoha
- Add gcm(aes) support for AMD/Xilinx Versal device
- Allow tfms to share device in hisilicon/trng"
* tag 'v7.0-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (100 commits)
crypto: img-hash - Use unregister_ahashes in img_{un}register_algs
crypto: testmgr - Add test vectors for authenc(hmac(md5),cbc(des3_ede))
crypto: cesa - Simplify return statement in mv_cesa_dequeue_req_locked
crypto: testmgr - Add test vectors for authenc(hmac(sha224),cbc(aes))
crypto: testmgr - Add test vectors for authenc(hmac(sha384),cbc(aes))
hwrng: core - use RCU and work_struct to fix race condition
crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req()
crypto: xilinx - Fix inconsistant indentation
crypto: rng - Use unregister_rngs in register_rngs
crypto: atmel - Use unregister_{aeads,ahashes,skciphers}
hwrng: optee - simplify OP-TEE context match
crypto: ccp - Add sysfs attribute for boot integrity
dt-bindings: crypto: atmel,at91sam9g46-sha: add microchip,lan9691-sha
dt-bindings: crypto: atmel,at91sam9g46-aes: add microchip,lan9691-aes
dt-bindings: crypto: qcom,inline-crypto-engine: document the Milos ICE
crypto: caam - fix netdev memory leak in dpaa2_caam_probe
crypto: hisilicon/qm - increase wait time for mailbox
crypto: hisilicon/qm - obtain the mailbox configuration at one time
crypto: hisilicon/qm - remove unnecessary code in qm_mb_write()
crypto: hisilicon/qm - move the barrier before writing to the mailbox register
...
|
||
|
|
13d83ea9d8 |
Crypto library updates for 7.0
- Add support for verifying ML-DSA signatures.
ML-DSA (Module-Lattice-Based Digital Signature Algorithm) is a
recently-standardized post-quantum (quantum-resistant) signature
algorithm. It was known as Dilithium pre-standardization.
The first use case in the kernel will be module signing. But there
are also other users of RSA and ECDSA signatures in the kernel that
might want to upgrade to ML-DSA eventually.
- Improve the AES library:
- Make the AES key expansion and single block encryption and
decryption functions use the architecture-optimized AES code.
Enable these optimizations by default.
- Support preparing an AES key for encryption-only, using about
half as much memory as a bidirectional key.
- Replace the existing two generic implementations of AES with a
single one.
- Simplify how Adiantum message hashing is implemented. Remove the
"nhpoly1305" crypto_shash in favor of direct lib/crypto/ support for
NH hashing, and enable optimizations by default.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaYlV8xQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK1ffAQCbM+cnqF4ThspBCgLZGSScx02KsA4U
dQblKoOFyIEbnwEA1ElJNhNQs2m7AT+R0hOh6yI+5+ttUfqLMT9tuNs2mwM=
=iZ06
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
- Add support for verifying ML-DSA signatures.
ML-DSA (Module-Lattice-Based Digital Signature Algorithm) is a
recently-standardized post-quantum (quantum-resistant) signature
algorithm. It was known as Dilithium pre-standardization.
The first use case in the kernel will be module signing. But there
are also other users of RSA and ECDSA signatures in the kernel that
might want to upgrade to ML-DSA eventually.
- Improve the AES library:
- Make the AES key expansion and single block encryption and
decryption functions use the architecture-optimized AES code.
Enable these optimizations by default.
- Support preparing an AES key for encryption-only, using about
half as much memory as a bidirectional key.
- Replace the existing two generic implementations of AES with a
single one.
- Simplify how Adiantum message hashing is implemented. Remove the
"nhpoly1305" crypto_shash in favor of direct lib/crypto/ support for
NH hashing, and enable optimizations by default.
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (53 commits)
lib/crypto: mldsa: Clarify the documentation for mldsa_verify() slightly
lib/crypto: aes: Drop 'volatile' from aes_sbox and aes_inv_sbox
lib/crypto: aes: Remove old AES en/decryption functions
lib/crypto: aesgcm: Use new AES library API
lib/crypto: aescfb: Use new AES library API
crypto: omap - Use new AES library API
crypto: inside-secure - Use new AES library API
crypto: drbg - Use new AES library API
crypto: crypto4xx - Use new AES library API
crypto: chelsio - Use new AES library API
crypto: ccp - Use new AES library API
crypto: x86/aes-gcm - Use new AES library API
crypto: arm64/ghash - Use new AES library API
crypto: arm/ghash - Use new AES library API
staging: rtl8723bs: core: Use new AES library API
net: phy: mscc: macsec: Use new AES library API
chelsio: Use new AES library API
Bluetooth: SMP: Use new AES library API
crypto: x86/aes - Remove the superseded AES-NI crypto_cipher
lib/crypto: x86/aes: Add AES-NI optimization
...
|
||
|
|
e3372ffb5f |
KVM: s390: Increase permitted SE header size to 1 MiB
Relax the maximum allowed Secure Execution (SE) header size from 8 KiB to 1 MiB. This allows individual secure guest images to run on a wider range of physical machines. Signed-off-by: Steffen Eiden <seiden@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> |
||
|
|
f8f296ea1c |
KVM: s390: vsie: Fix race in acquire_gmap_shadow()
The shadow gmap returned by gmap_create_shadow() could get dropped
before taking the gmap->children_lock. This meant that the shadow gmap
was sometimes being used while its reference count was 0.
Fix this by taking the additional reference inside gmap_create_shadow()
while still holding gmap->children_lock, instead of afterwards.
Fixes:
|
||
|
|
b6ab71a27c |
KVM: s390: vsie: Fix race in walk_guest_tables()
It is possible that walk_guest_tables() is called on a shadow gmap that
has been removed already, in which case its parent will be NULL.
In such case, return -EAGAIN and let the callers deal with it.
Fixes:
|
||
|
|
898885477e |
KVM: s390: Use guest address to mark guest page dirty
Stop using the userspace address to mark the guest page dirty.
mark_page_dirty() expects a guest frame number, but was being passed a
host virtual frame number. When slot == NULL, mark_page_dirty_in_slot()
does nothing and does not complain.
This means that in some circumstances the dirtiness of the guest page
might have been lost.
Fix by adding two fields in struct kvm_s390_adapter_int to keep the
guest addressses, and use those for mark_page_dirty().
Fixes:
|
||
|
|
c48953d819 |
s390 updates for 7.0 merge window
- Drop support for outdated 3590/3592 and 3480 tape devices, and limit support to virtualized 3490E types devices - Implement exception based WARN() and WARN_ONCE() similar to x86 - Slightly optimize preempt primitives like __preempt_count_add() and __preempt_count_dec_and_test() - A couple of small fixes and improvements -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmmHePIACgkQIg7DeRsp bsIQeA//ZBOWwSlIkGhdH/qn7F2RMxq/FkvYN28YvCo1VFdAiqRXjDBH8yXE9Px4 MghsDY1GzmW3M56Qq/rYZ2UhK0dIgpu9l8SJa5uxRaIzhIUxjmNJa+f3LhtCTZZH 9timoL5zL+n8QwwLPo9DgKy+m/BOodKBeI9cHFYoia64eJqo1xDVg8tYzW+vlVZT LZt0kT6Nz/Hrkg/uOhsz40IGzR/fcsNeDGTF+JIjqcfpdMSAeDMeleWVRacw/0BZ q1gifRXxe04N8bjS7c98RiKX7CD3xQzzibH2ert2Mupu+yir6pvAlgYHOif3Z8gi 6trcSWaxZCCslS2U7O1g/hyz1WXEFC+iDwajGiqT0XRSjuQ2FeVmfqcmaE0CekyY 5mpdtwfLrNSZJL422a3lckqz73gkge5hC46wgvhpvx7lb4IF6paYsk6FPDZlxw+/ THxbrYufs71VACvcfRs5MXSS94qkzkdgo5jhnS/m5zhblIrdkBUz29c5g24qUWo1 ihyzkqtwMFHpKXE9rHK/Z80uZXr4/cLPpMq8XYXRQHZ6vFyZFfu4QpLHWTQ0VMyp ZBijhRqzlN/nAItAfBsgJ5QipHk2WL7V8zoi5xu7QeH+lrZ+7+koSVxGJAZbG4OO 3fv6Nucjr/zCbyRKrjEaWaXzdMCVSdfrtfTQgftgFHTO8IxVLjc= =xeBU -----END PGP SIGNATURE----- Merge tag 's390-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - Drop support for outdated 3590/3592 and 3480 tape devices, and limit support to virtualized 3490E types devices - Implement exception based WARN() and WARN_ONCE() similar to x86 - Slightly optimize preempt primitives like __preempt_count_add() and __preempt_count_dec_and_test() - A couple of small fixes and improvements * tag 's390-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (35 commits) s390/tape: Consolidate tape config options and modules s390/cio: Fix device lifecycle handling in css_alloc_subchannel() s390/tape: Rename tape_34xx.c to tape_3490.c s390/tape: Cleanup sense data analysis and error handling s390/tape: Remove 3480 tape device type s390/tape: Remove unused command definitions s390/tape: Remove special block id handling s390/tape: Remove tape load display support s390/tape: Remove support for 3590/3592 models s390/kexec: Emit an error message when cmdline is too long s390/configs: Enable BLK_DEV_NULL_BLK as module s390: Document s390 stackprotector support s390/perf: Disable register readout on sampling events s390/Kconfig: Define non-zero ILLEGAL_POINTER_VALUE s390/bug: Prevent tail-call optimization s390/bug: Skip __WARN_trap() in call traces s390/bug: Implement WARN_ONCE() s390/bug: Implement __WARN_printf() s390/traps: Copy monitor code to pt_regs s390/bug: Introduce and use monitor code macro ... |
||
|
|
7db06e329a |
s390: remove kvm_types.h from Kbuild
kvm_types.h is mandatory in include/asm-generic/Kbuild so having it in another Kbuild file causes a warning. Remove it from the arch/ Kbuild file to fix the warning. ../scripts/Makefile.asm-headers:39: redundant generic-y found in ../arch/s390/include/asm/Kbuild: kvm_types.h Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patch.msgid.link/20260203184204.1329414-1-rdunlap@infradead.org |
||
|
|
0ee4ddc164 |
KVM: s390: Storage key manipulation IOCTL
Add a new IOCTL to allow userspace to manipulate storage keys directly. This will make it easier to write selftests related to storage keys. Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> |
||
|
|
0fdd5c18a9 |
KVM: s390: Enable 1M pages for gmap
While userspace is allowed to have pages of any size, the new gmap would always use 4k pages to back the guest. Enable 1M pages for gmap. This allows 1M pages to be used to back a guest when userspace is using 1M pages for the corresponding addresses (e.g. THP or hugetlbfs). Remove the limitation that disallowed having nested guests and hugepages at the same time. Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> |
||
|
|
728b0e21b4 |
KVM: S390: Remove PGSTE code from linux/s390 mm
Remove the PGSTE config option. Remove all code from linux/s390 mm that involves PGSTEs. Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> |
||
|
|
cec38587a9 |
KVM: s390: Remove gmap from s390/mm
Remove the now unused include/asm/gmap.h and mm/gmap.c files. Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> |
||
|
|
e38c884df9 |
KVM: s390: Switch to new gmap
Switch KVM/s390 to use the new gmap code. Remove includes to <gmap.h> and include "gmap.h" instead; fix all the existing users of the old gmap functions to use the new ones instead. Fix guest storage key access functions to work with the new gmap. Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> |
||
|
|
d29a29a9e1 |
KVM: s390: Storage key functions refactoring
Refactor some storage key functions to improve readability. Introduce helper functions that will be used in the next patches. Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> |
||
|
|
cc50f105fd |
KVM: s390: Stop using CONFIG_PGSTE
Switch to using IS_ENABLED(CONFIG_KVM) instead of CONFIG_PGSTE, since the latter will be removed soon. Many CONFIG_PGSTE are left behind, because they will be removed completely in upcoming patches. The ones replaced here are mostly the ones that will stay. Reviewed-by: Steffen Eiden <seiden@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> |
||
|
|
e5f98a6899 |
KVM: s390: Add some helper functions needed for vSIE
Implement gmap_protect_asce_top_level(), which was a stub. This function was a stub due to cross dependencies with other patches. Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> |
||
|
|
e907ae5301 |
KVM: s390: Add helper functions for fault handling
Add some helper functions for handling multiple guest faults at the same time. This will be needed for VSIE, where a nested guest access also needs to access all the page tables that map it. Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> |
||
|
|
a2c17f9270 |
KVM: s390: New gmap code
New gmap (guest map) code. This new gmap code will only be used by KVM. This will replace the existing gmap. Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> |
||
|
|
7b368470e1 |
KVM: s390: KVM page table management functions: CMMA
Add page table management functions to be used for KVM guest (gmap) page tables. This patch adds functions to handle CMMA and the ESSA instruction. Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> |
||
|
|
94fd9b16cc |
KVM: s390: KVM page table management functions: lifecycle management
Add page table management functions to be used for KVM guest (gmap) page tables. This patch adds functions to handle memslot creation and destruction, additional per-pagetable data stored in the PGSTEs, mapping physical addresses into the gmap, and marking address ranges as prefix. Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> |