The current uses of PageAnon in page table check functions can lead to
type confusion bugs between struct page and slab [1], if slab pages are
accidentally mapped into the user space. This is because slab reuses the
bits in struct page to store its internal states, which renders PageAnon
ineffective on slab pages.
Since slab pages are not expected to be mapped into the user space, this
patch adds BUG_ON(PageSlab(page)) checks to make sure that slab pages
are not inadvertently mapped. Otherwise, there must be some bugs in the
kernel.
Reported-by: syzbot+fcf1a817ceb50935ce99@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/000000000000258e5e05fae79fc1@google.com/ [1]
Fixes: df4e817b71 ("mm: page table check")
Cc: <stable@vger.kernel.org> # 5.17
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Acked-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/r/20230515130958.32471-5-lrh2000@pku.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Without EXCLUSIVE_SYSTEM_RAM, users are allowed to map arbitrary
physical memory regions into the userspace via /dev/mem. At the same
time, pages may change their properties (e.g., from anonymous pages to
named pages) while they are still being mapped in the userspace, leading
to "corruption" detected by the page table check.
To avoid these false positives, this patch makes PAGE_TABLE_CHECK
depends on EXCLUSIVE_SYSTEM_RAM. This dependency is understandable
because PAGE_TABLE_CHECK is a hardening technique but /dev/mem without
STRICT_DEVMEM (i.e., !EXCLUSIVE_SYSTEM_RAM) is itself a security
problem.
Even with EXCLUSIVE_SYSTEM_RAM, I/O pages may be still allowed to be
mapped via /dev/mem. However, these pages are always considered as named
pages, so they won't break the logic used in the page table check.
Cc: <stable@vger.kernel.org> # 5.17
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/r/20230515130958.32471-4-lrh2000@pku.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When hcd->localmem_pool is non-null, localmem_pool is used to allocate
DMA memory. In this case, the dma address will be properly returned (in
dma_handle), and dma_mmap_coherent should be used to map this memory
into the user space. However, the current implementation uses
pfn_remap_range, which is supposed to map normal pages.
Instead of repeating the logic in the memory allocation function, this
patch introduces a more robust solution. Here, the type of allocated
memory is checked by testing whether dma_handle is properly set. If
dma_handle is properly returned, it means some DMA pages are allocated
and dma_mmap_coherent should be used to map them. Otherwise, normal
pages are allocated and pfn_remap_range should be called. This ensures
that the correct mmap functions are used consistently, independently
with logic details that determine which type of memory gets allocated.
Fixes: a0e710a7de ("USB: usbfs: fix mmap dma mismatch")
Cc: stable@vger.kernel.org
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Link: https://lore.kernel.org/r/20230515130958.32471-3-lrh2000@pku.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current implementation of usbdev_mmap uses usb_alloc_coherent to
allocate memory pages that will later be mapped into the user space.
Meanwhile, usb_alloc_coherent employs three different methods to
allocate memory, as outlined below:
* If hcd->localmem_pool is non-null, it uses gen_pool_dma_alloc to
allocate memory;
* If DMA is not available, it uses kmalloc to allocate memory;
* Otherwise, it uses dma_alloc_coherent.
However, it should be noted that gen_pool_dma_alloc does not guarantee
that the resulting memory will be page-aligned. Furthermore, trying to
map slab pages (i.e., memory allocated by kmalloc) into the user space
is not resonable and can lead to problems, such as a type confusion bug
when PAGE_TABLE_CHECK=y [1].
To address these issues, this patch introduces hcd_alloc_coherent_pages,
which addresses the above two problems. Specifically,
hcd_alloc_coherent_pages uses gen_pool_dma_alloc_align instead of
gen_pool_dma_alloc to ensure that the memory is page-aligned. To replace
kmalloc, hcd_alloc_coherent_pages directly allocates pages by calling
__get_free_pages.
Reported-by: syzbot+fcf1a817ceb50935ce99@syzkaller.appspotmail.comm
Closes: https://lore.kernel.org/lkml/000000000000258e5e05fae79fc1@google.com/ [1]
Fixes: f7d34b445a ("USB: Add support for usbfs zerocopy.")
Fixes: ff2437befd ("usb: host: Fix excessive alignment restriction for local memory allocations")
Cc: stable@vger.kernel.org
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230515130958.32471-2-lrh2000@pku.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The scsi driver function sd_read_block_characteristics() always calls
disk_set_zoned() to a disk zoned model correctly, in case the device
model changed. This is done even for regular disks to set the zoned
model to BLK_ZONED_NONE and free any zone related resources if the drive
previously was zoned.
This behavior significantly impact the time it takes to revalidate disks
on a large system as the call to disk_clear_zone_settings() done from
disk_set_zoned() for the BLK_ZONED_NONE case results in the device
request queued to be frozen, even if there are no zone resources to
free.
Avoid this overhead for non-zoned devices by not calling
disk_clear_zone_settings() in disk_set_zoned() if the device model
was already set to BLK_ZONED_NONE, which is always the case for regular
devices.
Reported by: Brian Bunker <brian@purestorage.com>
Fixes: 508aebb805 ("block: introduce blk_queue_clear_zone_settings()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230529073237.1339862-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The "udc" pointer was never set in the probe() function so it will
lead to a NULL dereference in udc_pci_remove() when we do:
usb_del_gadget_udc(&udc->gadget);
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/ZG+A/dNpFWAlCChk@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While exercising the unbind path, with the current implementation
the functionfs_unbind would be calling which waits for the ffs->mutex
to be available, however within the same time ffs_ep0_read is invoked
& if no setup packets are pending, it will invoke function
wait_event_interruptible_exclusive_locked_irq which by definition waits
for the ev.count to be increased inside the same mutex for which
functionfs_unbind is waiting.
This creates deadlock situation because the functionfs_unbind won't
get the lock until ev.count is increased which can only happen if
the caller ffs_func_unbind can proceed further.
Following is the illustration:
CPU1 CPU2
ffs_func_unbind() ffs_ep0_read()
mutex_lock(ffs->mutex)
wait_event(ffs->ev.count)
functionfs_unbind()
mutex_lock(ffs->mutex)
mutex_unlock(ffs->mutex)
ffs_event_add()
<deadlock>
Fix this by moving the event unbind before functionfs_unbind
to ensure the ev.count is incrased properly.
Fixes: 6a19da1110 ("usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait")
Cc: stable <stable@kernel.org>
Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa@quicinc.com>
Link: https://lore.kernel.org/r/20230525092854.7992-1-quic_uaggarwa@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At iMX8QM platform, enable NCM gadget and run 'iperf3 -s'.
At host, run 'iperf3 -V -c fe80::6863:98ff:feef:3e0%enxc6e147509498'
[ 5] 0.00-1.00 sec 1.55 MBytes 13.0 Mbits/sec 90 4.18 KBytes
[ 5] 1.00-2.00 sec 1.44 MBytes 12.0 Mbits/sec 75 4.18 KBytes
[ 5] 2.00-3.00 sec 1.48 MBytes 12.4 Mbits/sec 75 4.18 KBytes
Expected speed should be bigger than 300Mbits/sec.
The root cause of this performance drop was found to be data corruption
happening at 4K borders in some Ethernet packets, leading to TCP
checksum errors. This corruption occurs from the position
(4K - (address & 0x7F)) to 4K. The u_ether function's allocation of
skb_buff reserves 64B, meaning all RX addresses resemble 0xXXXX0040.
Force trb_burst_size to 16 can fix this problem.
Cc: stable@vger.kernel.org
Fixes: 7733f6c32e ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20230518154946.3666662-1-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The channel's rpmsg object allows new invocations to be made. After old
invocations are already interrupted, the driver shouldn't try to invoke
anymore. Invalidating the rpmsg at the end of the driver removal
function makes it easy to cause a race condition in userspace. Even
closing a file descriptor before the driver finishes its cleanup can
cause an invocation via fastrpc_release_current_dsp_process() and
subsequent timeout.
Invalidate the channel before the invocations are interrupted to make
sure that no invocations can be created to hang after the device closes.
Fixes: c68cfb718c ("misc: fastrpc: Add support for context Invoke method")
Cc: stable <stable@kernel.org>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523152550.438363-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return value is initialized as -1, or -EPERM. The completion of an
invocation implies that the return value is set appropriately, but
"Permission denied" does not accurately describe the outcome of the
invocation. Set the invocation's return value to a more appropriate
"Broken pipe", as the cleanup breaks the driver's connection with rpmsg.
Fixes: c68cfb718c ("misc: fastrpc: Add support for context Invoke method")
Cc: stable <stable@kernel.org>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523152550.438363-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The userspace map request for remote heap allocates CMA memory.
The ownership of this memory needs to be reassigned to proper
owners to allow access from the protection domain running on
DSP. This reassigning of ownership is not correct if done for
any other supported flags.
When any other flag is requested from userspace, fastrpc is
trying to reassign the ownership of memory and this reassignment
is getting skipped for remote heap request which is incorrect.
Add proper flag check to reassign the memory only if remote heap
is requested.
Fixes: 532ad70c6d ("misc: fastrpc: Add mmap request assigning for static PD pool")
Cc: stable <stable@kernel.org>
Tested-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523152550.438363-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a map request is made with securemap attribute, the memory
ownership needs to be reassigned to new VMID to allow access
from protection domain. Currently only DSP VMID is passed to
the reassign call which is incorrect as only a combination of
HLOS and DSP VMID is allowed for memory ownership reassignment
and passing only DSP VMID will cause assign call failure.
Also pass proper restoring permissions to HLOS as the source
permission will now carry both HLOS and DSP VMID permission.
Change is also made to get valid physical address from
scatter/gather for this allocation request.
Fixes: e90d911906 ("misc: fastrpc: Add support to secure memory map")
Cc: stable <stable@kernel.org>
Tested-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523152550.438363-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hibernation support depends on firmware marking its reserved/PMP
protected regions as not accessible from Linux.
The latest versions of the de-facto SBI implementation (OpenSBI) do
not do this, having dropped the no-map property to enable 1 GiB huge
page mappings by the kernel.
This was exposed by commit 3335068f87 ("riscv: Use PUD/P4D/PGD pages
for the linear mapping"), which made the first 2 MiB of DRAM (where SBI
typically resides) accessible by the kernel.
Attempting to hibernate with either OpenSBI, or other implementations
following its lead, will lead to a kernel panic ([1], [2]) as the
hibernation process will attempt to save/restore any mapped regions,
including the PMP protected regions in use by the SBI implementation.
Mark hibernation as depending on "NONPORTABLE", as only a small subset
of systems are capable of supporting it, until such time that an SBI
implementation independent way to communicate what regions are in use
has been agreed on.
As hibernation support landed in v6.4-rc1, disabling it for most
platforms does not constitute a regression. The alternative would have
been reverting commit 3335068f87 ("riscv: Use PUD/P4D/PGD pages for
the linear mapping").
Doing so would permit hibernation on platforms with these SBI
implementations, but would limit the options we have to solve the
protection of the region without causing a regression in hibernation
support.
Reported-by: Song Shuai <suagrfillet@gmail.com>
Link: https://lore.kernel.org/all/CAAYs2=gQvkhTeioMmqRDVGjdtNF_vhB+vm_1dHJxPNi75YDQ_Q@mail.gmail.com/ [1]
Reported-by: JeeHeng Sia <jeeheng.sia@starfivetech.com>
Link: https://groups.google.com/a/groups.riscv.org/g/sw-dev/c/ITXwaKfA6z8 [2]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230526-astride-detonator-9ae120051159@wendy
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
User events:
- Use long instead of int for storing the enable set/clear bit, as it was
found that big endian machines could end up using the wrong bits.
- Split allocating mm and attaching it. This keeps the allocation separate
from the registration and avoids various races.
- Remove RCU locking around pin_user_pages_remote() as that can schedule. The
RCU protection is no longer needed with the above split of mm allocation and
attaching.
- Rename the "link" fields of the various structs to something more
meaningful.
- Add comments around user_event_mm struct usage and locking requirements.
Timerlat tracer:
- Fix missed wakeup of timerlat thread caused by the timerlat interrupt
triggering when tracing is off. The timer interrupt handler needs to always
wake up the timerlat thread regardless if tracing is enabled or not,
otherwise, it will never wake up.
Histograms:
- Fix regression of breaking the "stacktrace" modifier for variables. That
modifier cannot be used for values, but can be used for variables that are
passed from one histogram to the next. This was broken when adding the
restriction to values as the variable logic used the same code.
- Rename the special field "stacktrace" to "common_stacktrace". Special fields
(that are not actually part of the event, but can act just like event
fields, like 'comm' and 'timestamp') should be prefixed with 'common_' for
consistency. To keep backward compatibility, 'stacktrace' can still be used
(as with the special field 'cpu'), but can be overridden if the event has a
field called 'stacktrace'.
- Update the synthetic event selftests to use the new name (synthetic events
are created by histograms)
Tracing bootup selftests:
- Reorganize the code to keep artifacts of the selftests not compiled in when
selftests are not configured.
- Add various cond_resched() around the selftest code, as the softlock
watchdog was triggering much more often. It appears that the kernel runs
slower now with full debugging enabled.
- While debugging ftrace with ftrace (using an instance ring buffer instead of
the top level one), I found that the selftests were disabling prints to the
debug instance. This should not happen, as the selftests only disable
printing to the main buffer as the selftests examine the main buffer to see
if it has what it expects, and prints can make the tests fail. Make the
selftests only disable printing to the toplevel buffer, and leave the
instance buffers alone.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZHQGJBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qu6hAQCJ1WebZUTJ/s7pFo36mXirLnrW4afB
Ua6sALseqKNesgEAyhLmd2+sMeqmAbCCIUWtcWJb/Pod0jGOt0U8+cBxfw8=
=PhaX
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"User events:
- Use long instead of int for storing the enable set/clear bit, as it
was found that big endian machines could end up using the wrong
bits.
- Split allocating mm and attaching it. This keeps the allocation
separate from the registration and avoids various races.
- Remove RCU locking around pin_user_pages_remote() as that can
schedule. The RCU protection is no longer needed with the above
split of mm allocation and attaching.
- Rename the "link" fields of the various structs to something more
meaningful.
- Add comments around user_event_mm struct usage and locking
requirements.
Timerlat tracer:
- Fix missed wakeup of timerlat thread caused by the timerlat
interrupt triggering when tracing is off. The timer interrupt
handler needs to always wake up the timerlat thread regardless if
tracing is enabled or not, otherwise, it will never wake up.
Histograms:
- Fix regression of breaking the "stacktrace" modifier for variables.
That modifier cannot be used for values, but can be used for
variables that are passed from one histogram to the next. This was
broken when adding the restriction to values as the variable logic
used the same code.
- Rename the special field "stacktrace" to "common_stacktrace".
Special fields (that are not actually part of the event, but can
act just like event fields, like 'comm' and 'timestamp') should be
prefixed with 'common_' for consistency. To keep backward
compatibility, 'stacktrace' can still be used (as with the special
field 'cpu'), but can be overridden if the event has a field called
'stacktrace'.
- Update the synthetic event selftests to use the new name (synthetic
events are created by histograms)
Tracing bootup selftests:
- Reorganize the code to keep artifacts of the selftests not compiled
in when selftests are not configured.
- Add various cond_resched() around the selftest code, as the
softlock watchdog was triggering much more often. It appears that
the kernel runs slower now with full debugging enabled.
- While debugging ftrace with ftrace (using an instance ring buffer
instead of the top level one), I found that the selftests were
disabling prints to the debug instance.
This should not happen, as the selftests only disable printing to
the main buffer as the selftests examine the main buffer to see if
it has what it expects, and prints can make the tests fail.
Make the selftests only disable printing to the toplevel buffer,
and leave the instance buffers alone"
* tag 'trace-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Have function_graph selftest call cond_resched()
tracing: Only make selftest conditionals affect the global_trace
tracing: Make tracing_selftest_running/delete nops when not used
tracing: Have tracer selftests call cond_resched() before running
tracing: Move setting of tracing_selftest_running out of register_tracer()
tracing/selftests: Update synthetic event selftest to use common_stacktrace
tracing: Rename stacktrace field to common_stacktrace
tracing/histograms: Allow variables to have some modifiers
tracing/user_events: Document user_event_mm one-shot list usage
tracing/user_events: Rename link fields for clarity
tracing/user_events: Remove RCU lock while pinning pages
tracing/user_events: Split up mm alloc and attach
tracing/timerlat: Always wakeup the timerlat thread
tracing/user_events: Use long vs int for atomic bit ops
This reverts commit 9828ed3f69.
Sadly, it does seem to cause failures to load modules. Johan Hovold reports:
"This change breaks module loading during boot on the Lenovo Thinkpad
X13s (aarch64).
Specifically it results in indefinite probe deferral of the display
and USB (ethernet) which makes it a pain to debug. Typing in the dark
to acquire some logs reveals that other modules are missing as well"
Since this was applied late as a "let's try this", I'm reverting it
asap, and we can try to figure out what goes wrong later. The excessive
parallel module loading problem is annoying, but not noticeable in
normal situations, and this was only meant as an optimistic workaround
for a user-space bug.
One possible solution may be to do the optimistic exclusive open first,
and then use a lock to serialize loading if that fails.
Reported-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/lkml/ZHRpH-JXAxA6DnzR@hovoldconsulting.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the boot firmware has already established tunnels, especially ones
that have special requirements from the link such as DisplayPort, we
should not blindly enable CL states (nor change the TMU configuration).
Otherwise the existing tunnels may not work as expected.
For this reason, skip the CL state enabling when we go over the existing
topology. This will also keep the TMU settings untouched because we do
not change the TMU configuration when CL states are not enabled.
Reported-by: Koba Ko <koba.ko@canonical.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7831
Cc: stable@vger.kernel.org # v6.0+
Acked-By: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
It turns out that when plugging in VGA cable through USB-C to VGA/DVI
dongle the Connection Manager handshake can take longer time, at least
on Intel Titan Ridge based docks such as Dell WD91TB. This leads to
following error in the dmesg:
thunderbolt 0000:00:0d.3: 3:10: DP tunnel activation failed, aborting
and the display stays blank (because we failed to establish the tunnel).
For this reason increase the timeout to 3s.
Reported-by: Koba Ko <koba.ko@canonical.com>
Cc: stable@vger.kernel.org
Acked-By: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
When all kernel debugging is enabled (lockdep, KSAN, etc), the function
graph enabling and disabling can take several seconds to complete. The
function_graph selftest enables and disables function graph tracing
several times. With full debugging enabled, the soft lockup watchdog was
triggering because the selftest was running without ever scheduling.
Add cond_resched() throughout the test to make sure it does not trigger
the soft lockup detector.
Link: https://lkml.kernel.org/r/20230528051742.1325503-6-rostedt@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The tracing_selftest_running and tracing_selftest_disabled variables were
to keep trace_printk() and other writes from affecting the tracing
selftests, as the tracing selftests would examine the ring buffer to see
if it contained what it expected or not. trace_printk() and friends could
add to the ring buffer and cause the selftests to fail (and then disable
the tracer that was being tested). To keep that from happening, these
variables were added and would keep trace_printk() and friends from
writing to the ring buffer while the tests were going on.
But this was only the top level ring buffer (owned by the global_trace
instance). There is no reason to prevent writing into ring buffers of
other instances via the trace_array_printk() and friends. For the
functions that could be used by other instances, check if the global_trace
is the tracer instance that is being written to before deciding to not
allow the write.
Link: https://lkml.kernel.org/r/20230528051742.1325503-5-rostedt@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There's no reason to test the condition variables tracing_selftest_running
or tracing_selftest_delete when tracing selftests are not enabled. Make
them define 0s when not the selftests are not configured in.
Link: https://lkml.kernel.org/r/20230528051742.1325503-4-rostedt@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
As there are more and more internal selftests being added to the Linux
kernel (KSAN, lockdep, etc) the selftests are taking longer to run when
these are enabled. Add a cond_resched() to the calling of
do_run_tracer_selftest() to force a schedule if NEED_RESCHED is set,
otherwise the soft lockup watchdog may trigger on boot up.
Link: https://lkml.kernel.org/r/20230528051742.1325503-3-rostedt@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The variables tracing_selftest_running and tracing_selftest_disabled are
only used for when CONFIG_FTRACE_STARTUP_TEST is enabled. Make them only
visible within the selftest code. The setting of those variables are in
the register_tracer() call, and set in a location where they do not need
to be. Create a wrapper around run_tracer_selftest() called
do_run_tracer_selftest() which sets those variables, and have
register_tracer() call that instead.
Having those variables only set within the CONFIG_FTRACE_STARTUP_TEST
scope gets rid of them (and also the ability to remove testing against
them) when the startup tests are not enabled (most cases).
Link: https://lkml.kernel.org/r/20230528051742.1325503-2-rostedt@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- AT HDMAC driver fixes for Flow Controller bitfield, peripheral ID
handling and potential NULL dereference check
- PL330 function rename to avoid conflicts
- build warning fix for pm function in TI driver
- IDXD driver fix for passing freed memory
-----BEGIN PGP SIGNATURE-----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=T3nh
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"Driver fixes for the at-hdmac, pl330, TI and IDXD drivers:
- AT HDMAC driver fixes for Flow Controller bitfield, peripheral ID
handling and potential NULL dereference check
- PL330 function rename to avoid conflicts
- build warning fix for pm function in TI driver
- IDXD driver fix for passing freed memory"
* tag 'dmaengine-fix-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: at_hdmac: Extend the Flow Controller bitfield to three bits
dmaengine: at_hdmac: Repair bitfield macros for peripheral ID handling
dmaengine: pl330: rename _start to prevent build error
dmaengine: at_xdmac: fix potential Oops in at_xdmac_prep_interleaved()
dmaengine: ti: k3-udma: annotate pm function with __maybe_unused
dmaengine: idxd: Fix passing freed memory in idxd_cdev_open()
Usual mixed bag of issues in new code for this cycle and old issues
that have surfaced in the last few weeks.
- adi,ad_sigma_delta
* Ensure irq lazy disable handing is not used as it breaks completion
detection.
- adi,ad4130
* Fix failure to remove clock provider.
- adi,ad5758
* Wrong CONFIG variable used to control driver build.
- adi,ad7192
* Fix repeated channel index by just expressing shorted channels
as differential channel between a channel and itself.
- adi,ad74413
* Fix error handling for resistance input processing to not fail
in case of success.
- rohm,bu27034
* Fix integration time in wrong units (should be seconds not usecs)
* Ensure reset is actually written not detected as already set from
regcache.
- gts helper
* Fix wrong parameter docs.
* Fix integration time in wrong units (should be seconds not usecs)
- fsl,imx8qxp-adc
* Add missing vref-supply to binding doc (already used by driver)
- fsl,imx93
* Fix sign bug in read_raw() so that error check didn't work.
- inv,icm42600
* Fix reset of timestamp to work even if a particular sensor is off when
the chip is first enabled.
- kionix,kx022a
* Fix irq get form fw node to not include the 0 value.
- microchip,mcp4725
* Fix return value from i2c_master_send() handling to nto assume 0 on
success.
- mediatek,mt6370
* Fix incorrect scaling of a few currents on devices with particular
vendor IDs.
- fsl,mxs-lradc
* Cleanup ordering issue fix.
- renesas,rcar-adc bindings
* Fix missing vendor prefix for adi,ad7476
- st,st_accel
* Fix handling when no ACPI _ONT method present.
- st,stm32-adc
* Handle no adc-diff-channel present case (all single ended)
* Handle no adc-channels present case (all differential)
- ti,palmas
* Fix off by one bug that could allow out of bounds read if callers
provided wrong value.
- ti,tmag5273
* Fix a runtime PM leak on measurement error
- vishay,vcnl4035
* Correctly mask chip ID so devices with different addresses
don't fail the test.
-----BEGIN PGP SIGNATURE-----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=NhJU
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
1st set of IIO fixes for the 6.4 cycle.
Usual mixed bag of issues in new code for this cycle and old issues
that have surfaced in the last few weeks.
- adi,ad_sigma_delta
* Ensure irq lazy disable handing is not used as it breaks completion
detection.
- adi,ad4130
* Fix failure to remove clock provider.
- adi,ad5758
* Wrong CONFIG variable used to control driver build.
- adi,ad7192
* Fix repeated channel index by just expressing shorted channels
as differential channel between a channel and itself.
- adi,ad74413
* Fix error handling for resistance input processing to not fail
in case of success.
- rohm,bu27034
* Fix integration time in wrong units (should be seconds not usecs)
* Ensure reset is actually written not detected as already set from
regcache.
- gts helper
* Fix wrong parameter docs.
* Fix integration time in wrong units (should be seconds not usecs)
- fsl,imx8qxp-adc
* Add missing vref-supply to binding doc (already used by driver)
- fsl,imx93
* Fix sign bug in read_raw() so that error check didn't work.
- inv,icm42600
* Fix reset of timestamp to work even if a particular sensor is off when
the chip is first enabled.
- kionix,kx022a
* Fix irq get form fw node to not include the 0 value.
- microchip,mcp4725
* Fix return value from i2c_master_send() handling to nto assume 0 on
success.
- mediatek,mt6370
* Fix incorrect scaling of a few currents on devices with particular
vendor IDs.
- fsl,mxs-lradc
* Cleanup ordering issue fix.
- renesas,rcar-adc bindings
* Fix missing vendor prefix for adi,ad7476
- st,st_accel
* Fix handling when no ACPI _ONT method present.
- st,stm32-adc
* Handle no adc-diff-channel present case (all single ended)
* Handle no adc-channels present case (all differential)
- ti,palmas
* Fix off by one bug that could allow out of bounds read if callers
provided wrong value.
- ti,tmag5273
* Fix a runtime PM leak on measurement error
- vishay,vcnl4035
* Correctly mask chip ID so devices with different addresses
don't fail the test.
* tag 'iio-fixes-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (23 commits)
iio: imu: inv_icm42600: fix timestamp reset
iio: adc: ad_sigma_delta: Fix IRQ issue by setting IRQ_DISABLE_UNLAZY flag
dt-bindings: iio: adc: renesas,rcar-gyroadc: Fix adi,ad7476 compatible value
iio: dac: mcp4725: Fix i2c_master_send() return value handling
iio: accel: kx022a fix irq getting
iio: bu27034: Ensure reset is written
iio: dac: build ad5758 driver when AD5758 is selected
iio: addac: ad74413: fix resistance input processing
iio: light: vcnl4035: fixed chip ID check
dt-bindings: iio: imx8qxp-adc: add missing vref-supply
iio: adc: stm32-adc: skip adc-channels setup if none is present
iio: adc: stm32-adc: skip adc-diff-channels setup if none is present
iio: adc: ad7192: Change "shorted" channels to differential
iio: accel: st_accel: Fix invalid mount_matrix on devices without ACPI _ONT method
iio: gts-helpers: fix integration time units
iio: bu27034: Fix integration time
iio: fix doc for iio_gts_find_sel_by_int_time
iio: adc: palmas: fix off by one bugs
iio: adc: mxs-lradc: fix the order of two cleanup operations
iio: ad4130: Make sure clock provider gets removed
...
The macOS hypervisor framework includes a host-side VMM called
VZLinuxBootLoader [1] which implements native support for booting the
Linux kernel inside a guest directly (instead of, e.g., via GRUB
installed inside the guest). On x86, it incorporates a BIOS style loader
that does not implement or expose EFI to the loaded kernel. However,
this loader appears to fail when the 'image minor version' field in the
kernel image's PE/COFF header (which is generally only used by EFI based
bootloaders) is set to any value other than 0x0. [2]
Commit e346bebbd3 ("efi: libstub: Always enable initrd command
line loader and bump version") incremented the EFI stub image minor
version to convey that all EFI stub kernels now implement support for
the initrd= command line option, and do so in a way where it can load
initrd images from any filesystem known to the EFI firmware (as opposed
to prior implementations that could only load initrds from the same
volume that the kernel image was loaded from).
Unfortunately, bumping the version to v1.1 triggers this issue in
VZLinuxBootLoader, breaking the boot on x86. So let's keep the image
minor version at 0x0, and bump the image major version instead.
While at it, convert this field to a bit field, so that individual
features are discoverable from it, as suggested by Linus. So let's bump
the major version to v3, and document the initrd= command line loading
feature as being represented by bit 1 in the mask.
Note that, due to the prior interpretation as a monotonically increasing
version field, loaders are still permitted to assume that the LoadFile2
initrd loading feature is supported for any major version value >= 1,
even if bit 0 is not set.
[1] https://developer.apple.com/documentation/virtualization/vzlinuxbootloader
[2] https://lore.kernel.org/linux-efi/CAG8fp8Teu4G9JuenQrqGndFt2Gy+V4YgJ=hN1xX7AD940YKf3A@mail.gmail.com/
Fixes: e346bebbd3 ("efi: libstub: Always enable initrd command ...")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217485
Signed-off-by: Akihiro Suda <suda.kyoto@gmail.com>
[ardb: rewrite comment and commit log]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
- Prevent a bogus setting for the number of HT siblings, which is caused
by the CPUID evaluation trainwreck of X86. That recomputes the value
for each CPU, so the last CPU "wins". That can cause completely bogus
sibling values.
-----BEGIN PGP SIGNATURE-----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=l43p
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu fix from Thomas Gleixner:
"A single fix for x86:
- Prevent a bogus setting for the number of HT siblings, which is
caused by the CPUID evaluation trainwreck of X86. That recomputes
the value for each CPU, so the last CPU "wins". That can cause
completely bogus sibling values"
* tag 'x86-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/topology: Fix erroneous smp_num_siblings on Intel Hybrid platforms
- Make the CHA discovery based on MSR readout to work around broken
discovery tables in some SPR firmwares.
- Prevent saving PEBS configuration which has software bits set that
cause a crash when restored into the relevant MSR.
-----BEGIN PGP SIGNATURE-----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=Z3GU
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A small set of perf fixes:
- Make the MSR-readout based CHA discovery work around broken
discovery tables in some SPR firmwares.
- Prevent saving PEBS configuration which has software bits set that
cause a crash when restored into the relevant MSR"
* tag 'perf-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/uncore: Correct the number of CHAs on SPR
perf/x86/intel: Save/restore cpuc->active_pebs_data_cfg when using guest PEBS
- Ensure that the stack pointer on x86 is aligned again so that the
unwinder does not read past the end of the stack
- Discard .note.gnu.property section which has a pointlessly different
alignment than the other note sections. That confuses tooling of all
sorts including readelf, libbpf and pahole.
-----BEGIN PGP SIGNATURE-----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=TPwY
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull unwinder fixes from Thomas Gleixner:
"A set of unwinder and tooling fixes:
- Ensure that the stack pointer on x86 is aligned again so that the
unwinder does not read past the end of the stack
- Discard .note.gnu.property section which has a pointlessly
different alignment than the other note sections. That confuses
tooling of all sorts including readelf, libbpf and pahole"
* tag 'objtool-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/show_trace_log_lvl: Ensure stack pointer is aligned, again
vmlinux.lds.h: Discard .note.gnu.property section
- Prevent that the allocation path wakes up kswapd. That's a long
standing issue due to the GFP_ATOMIC allocation flag. As debug objects
can be invoked from pretty much any context waking kswapd can end up
in arbitrary lock chains versus the waitqueue lock.
- Correct the explicit lockdep wait-type violation in
debug_object_fill_pool().
-----BEGIN PGP SIGNATURE-----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=7B4m
-----END PGP SIGNATURE-----
Merge tag 'core-debugobjects-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects fixes from Thomas Gleixner:
"Two fixes for debugobjects:
- Prevent the allocation path from waking up kswapd.
That's a long standing issue due to the GFP_ATOMIC allocation flag.
As debug objects can be invoked from pretty much any context waking
kswapd can end up in arbitrary lock chains versus the waitqueue
lock
- Correct the explicit lockdep wait-type violation in
debug_object_fill_pool()"
* tag 'core-debugobjects-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Don't wake up kswapd from fill_pool()
debugobjects,locking: Annotate debug_object_fill_pool() wait type violation
- Prevent loss of state in the MIPS GIC interrupt controller.
- Disable pseudo NMIs on Mediatek based Chromebooks as they have
firmware issues which cause instantenous chrashes and freezes
wen pseudo NMIs are used.
- Fix the error handling path in the MBIGEN driver and a defined but not
used warning in the meson-gpio interrupt chip driver.
-----BEGIN PGP SIGNATURE-----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=OHtk
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for interrupt chip drivers:
- Prevent loss of state in the MIPS GIC interrupt controller
- Disable pseudo NMIs on Mediatek based Chromebooks as they have
firmware issues which cause instantenous chrashes and freezes wen
pseudo NMIs are used
- Fix the error handling path in the MBIGEN driver and a defined but
not used warning in the meson-gpio interrupt chip driver"
* tag 'irq-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mbigen: Unify the error handling in mbigen_of_create_domain()
irqchip/meson-gpio: Mark OF related data as maybe unused
irqchip/mips-gic: Use raw spinlock for gic_lock
irqchip/mips-gic: Don't touch vl_map if a local interrupt is not routable
irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issues
dt-bindings: interrupt-controller: arm,gic-v3: Add quirk for Mediatek SoCs w/ broken FW
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZHGVRAAKCRCAXGG7T9hj
vqtJAQDizKasLE7tSnfs/FrZ/4xPaDLe3bQifMx2C1dtYCjRcAD/ciZSa1L0WzZP
dpEZnlYRzsR3bwLktQEMQFOvlbh1SwE=
=K860
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- a double free fix in the Xen pvcalls backend driver
- a fix for a regression causing the MSI related sysfs entries to not
being created in Xen PV guests
- a fix in the Xen blkfront driver for handling insane input data
better
* tag 'for-linus-6.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/pci/xen: populate MSI sysfs entries
xen/pvcalls-back: fix double frees with pvcalls_new_active_socket()
xen/blkfront: Only check REQ_FUA for writes
Here are some small driver fixes for 6.4-rc4. They are just two
different types:
- binder fixes and reverts for reported problems and regressions in
the binder "driver".
- coresight driver fixes for reported problems.
All of these have been in linux-next for over a week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZHG/lQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylPvACgx7Rq0HOFp4k984U/Z+cGzX2wSPIAn2W+6SKx
0Wgv1hIeXQb/p4LO+U2j
=LyzR
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small driver fixes for 6.4-rc4. They are just two
different types:
- binder fixes and reverts for reported problems and regressions in
the binder "driver".
- coresight driver fixes for reported problems.
All of these have been in linux-next for over a week with no reported
problems"
* tag 'char-misc-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: fix UAF of alloc->vma in race with munmap()
binder: add lockless binder_alloc_(set|get)_vma()
Revert "android: binder: stop saving a pointer to the VMA"
Revert "binder_alloc: add missing mmap_lock calls when using the VMA"
binder: fix UAF caused by faulty buffer cleanup
coresight: perf: Release Coresight path when alloc trace id failed
coresight: Fix signedness bug in tmc_etr_buf_insert_barrier_packet()
Add the assigned-clocks and assigned-clock-rates properties for the
LPUARTx nodes. Without these properties, the default clock rate
used would be 0, which can cause the UART ports to fail when open.
Fixes: 35f4e9d753 ("arm64: dts: imx8: split adma ss into dma and audio ss")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The USDHC2 CD and WP sginal should be on LSIO_GPIO5.
Fixes: 307fd14d4b ("arm64: dts: imx: add imx8qm mek support")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix trivial unused variable warning (when SMB1 support disabled)
"ioctl.c:324:17: warning: variable 'caps' set but not used [-Wunused-but-set-variable]"
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202305250056.oZhsJmdD-lkp@intel.com/
Signed-off-by: Steve French <stfrench@microsoft.com>
Grab sta_poll_lock spinlock in mt7615_mac_sta_poll routine in order to
avoid possible races with mt7615_mac_add_txs() or mt7615_mac_fill_rx()
removing msta pointer from sta_poll_list.
Fixes: a621372a04 ("mt76: mt7615: rework mt7615_mac_sta_poll for usb code")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/48b23404b759de4f1db2ef85975c72a4aeb1097c.1684938695.git.lorenzo@kernel.org
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
The LLCC EDAC register offsets varies between each SoC. Hardcoding the
register offsets won't work and will often result in crash due to
accessing the wrong locations.
Hence, get the register offsets from the LLCC driver matching the
individual SoCs.
Cc: <stable@vger.kernel.org> # 6.0: 5365cea199 ("soc: qcom: llcc: Rename reg_offset structs to reflect LLCC version")
Cc: <stable@vger.kernel.org> # 6.0: c13d7d261e ("soc: qcom: llcc: Pass LLCC version based register offsets to EDAC driver")
Cc: <stable@vger.kernel.org> # 6.0
Fixes: a6e9d7ef25 ("soc: qcom: llcc: Add configuration data for SM8450 SoC")
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230517114635.76358-3-manivannan.sadhasivam@linaro.org
