Current Intel USB4 host routers have hardware limitation that the USB3
bandwidth cannot go higher than 16376 Mb/s. Work this around by adding a
new quirk that limits the bandwidth for the affected host routers.
Cc: stable@vger.kernel.org
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In order to apply quirks based on certain adapter types move call to
tb_check_quirks() happen after the adapters are initialized. This should
not affect the existing quirks.
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
According to USB4 retimer specification, the process of firmware update
sequence requires issuing a SET_INBOUND_SBTX port operation that later
shall be followed by UNSET_INBOUND_SBTX port operation. This last step
is not currently issued by the driver but it is necessary to make sure
the retimers are put back to passthrough mode even during enumeration.
If this step is missing the link may not come up properly after
soft-reboot for example.
For this reason issue UNSET_INBOUND_SBTX after SET_INBOUND_SBTX for
enumeration and also when the NVM upgrade is run.
Reported-by: Christian Schaubschläger <christian.schaubschlaeger@gmx.at>
Link: https://lore.kernel.org/linux-usb/b556f5ed-5ee8-9990-9910-afd60db93310@gmx.at/
Cc: stable@vger.kernel.org
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Memory for the usb4->margining needs to be relased for the upstream port
of the router as well, even though the debugfs directory gets released
with the router device removal. Fix this.
Fixes: d0f1e0c2a6 ("thunderbolt: Add support for receiver lane margining")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Users reported oopses on list corruptions when using i915 perf with a
number of concurrently running graphics applications. Root cause analysis
pointed at an issue in barrier processing code -- a race among perf open /
close replacing active barriers with perf requests on kernel context and
concurrent barrier preallocate / acquire operations performed during user
context first pin / last unpin.
When adding a request to a composite tracker, we try to reuse an existing
fence tracker, already allocated and registered with that composite. The
tracker we obtain may already track another fence, may be an idle barrier,
or an active barrier.
If the tracker we get occurs a non-idle barrier then we try to delete that
barrier from a list of barrier tasks it belongs to. However, while doing
that we don't respect return value from a function that performs the
barrier deletion. Should the deletion ever fail, we would end up reusing
the tracker still registered as a barrier task. Since the same structure
field is reused with both fence callback lists and barrier tasks list,
list corruptions would likely occur.
Barriers are now deleted from a barrier tasks list by temporarily removing
the list content, traversing that content with skip over the node to be
deleted, then populating the list back with the modified content. Should
that intentionally racy concurrent deletion attempts be not serialized,
one or more of those may fail because of the list being temporary empty.
Related code that ignores the results of barrier deletion was initially
introduced in v5.4 by commit d8af05ff38 ("drm/i915: Allow sharing the
idle-barrier from other kernel requests"). However, all users of the
barrier deletion routine were apparently serialized at that time, then the
issue didn't exhibit itself. Results of git bisect with help of a newly
developed igt@gem_barrier_race@remote-request IGT test indicate that list
corruptions might start to appear after commit 311770173f ("drm/i915/gt:
Schedule request retirement when timeline idles"), introduced in v5.5.
Respect results of barrier deletion attempts -- mark the barrier as idle
only if successfully deleted from the list. Then, before proceeding with
setting our fence as the one currently tracked, make sure that the tracker
we've got is not a non-idle barrier. If that check fails then don't use
that tracker but go back and try to acquire a new, usable one.
v3: use unlikely() to document what outcome we expect (Andi),
- fix bad grammar in commit description.
v2: no code changes,
- blame commit 311770173f ("drm/i915/gt: Schedule request retirement
when timeline idles"), v5.5, not commit d8af05ff38 ("drm/i915: Allow
sharing the idle-barrier from other kernel requests"), v5.4,
- reword commit description.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6333
Fixes: 311770173f ("drm/i915/gt: Schedule request retirement when timeline idles")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org # v5.5
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302120820.48740-1-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 5060060557)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
It seems that commit bc3c5e0809 ("drm/i915/sseu: Don't try to store EU
mask internally in UAPI format") exposed a potential out-of-bounds
access, reported by UBSAN as following on a laptop with a gen 11 i915
card:
UBSAN: array-index-out-of-bounds in drivers/gpu/drm/i915/gt/intel_sseu.c:65:27
index 6 is out of range for type 'u16 [6]'
CPU: 2 PID: 165 Comm: systemd-udevd Not tainted 6.2.0-9-generic #9-Ubuntu
Hardware name: Dell Inc. XPS 13 9300/077Y9N, BIOS 1.11.0 03/22/2022
Call Trace:
<TASK>
show_stack+0x4e/0x61
dump_stack_lvl+0x4a/0x6f
dump_stack+0x10/0x18
ubsan_epilogue+0x9/0x3a
__ubsan_handle_out_of_bounds.cold+0x42/0x47
gen11_compute_sseu_info+0x121/0x130 [i915]
intel_sseu_info_init+0x15d/0x2b0 [i915]
intel_gt_init_mmio+0x23/0x40 [i915]
i915_driver_mmio_probe+0x129/0x400 [i915]
? intel_gt_probe_all+0x91/0x2e0 [i915]
i915_driver_probe+0xe1/0x3f0 [i915]
? drm_privacy_screen_get+0x16d/0x190 [drm]
? acpi_dev_found+0x64/0x80
i915_pci_probe+0xac/0x1b0 [i915]
...
According to the definition of sseu_dev_info, eu_mask->hsw is limited to
a maximum of GEN_MAX_SS_PER_HSW_SLICE (6) sub-slices, but
gen11_sseu_info_init() can potentially set 8 sub-slices, in the
!IS_JSL_EHL(gt->i915) case.
Fix this by reserving up to 8 slots for max_subslices in the eu_mask
struct.
Reported-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Fixes: bc3c5e0809 ("drm/i915/sseu: Don't try to store EU mask internally in UAPI format")
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230220171858.131416-1-andrea.righi@canonical.com
(cherry picked from commit 3cba09a6ac)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Currently we are using hardcoded 7 for io and fast wake lines.
According to Bspec io and fast wake times are both 42us for
DISPLAY_VER >= 12 and 50us and 32us for older platforms.
Calculate line counts for these and configure them into PSR2_CTL
accordingly
Use 45 us for the fast wake calculation as 42 seems to be too
tight based on testing.
Bspec: 49274, 4289
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: 64cf40a125 ("drm/i915/psr: Program default IO buffer Wake and Fast Wake")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7725
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230221085304.3382297-1-jouni.hogander@intel.com
(cherry picked from commit cb42e8ede5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Previous documentation suggested that PL1 power limit is always
enabled. However we now find this not to be the case on some
platforms (such as ATSM). Therefore enable PL1 power limit during hwmon
initialization.
Bspec: 51864
v2: Add Bspec reference (Gwan-gyeong)
v3: Add Fixes tag
Fixes: 99f55efb79 ("drm/i915/hwmon: Power PL1 limit and TDP setting")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230203155309.1042297-1-ashutosh.dixit@intel.com
(cherry picked from commit 0349c41b05)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
On s390 PCI functions may be hotplugged individually even when they
belong to a multi-function device. In particular on an SR-IOV device VFs
may be removed and later re-added.
In commit a50297cf82 ("s390/pci: separate zbus creation from
scanning") it was missed however that struct pci_bus and struct
zpci_bus's resource list retained a reference to the PCI functions MMIO
resources even though those resources are released and freed on
hot-unplug. These stale resources may subsequently be claimed when the
PCI function re-appears resulting in use-after-free.
One idea of fixing this use-after-free in s390 specific code that was
investigated was to simply keep resources around from the moment a PCI
function first appeared until the whole virtual PCI bus created for
a multi-function device disappears. The problem with this however is
that due to the requirement of artificial MMIO addreesses (address
cookies) extra logic is then needed to keep the address cookies
compatible on re-plug. At the same time the MMIO resources semantically
belong to the PCI function so tying their lifecycle to the function
seems more logical.
Instead a simpler approach is to remove the resources of an individually
hot-unplugged PCI function from the PCI bus's resource list while
keeping the resources of other PCI functions on the PCI bus untouched.
This is done by introducing pci_bus_remove_resource() to remove an
individual resource. Similarly the resource also needs to be removed
from the struct zpci_bus's resource list. It turns out however, that
there is really no need to add the MMIO resources to the struct
zpci_bus's resource list at all and instead we can simply use the
zpci_bar_struct's resource pointer directly.
Fixes: a50297cf82 ("s390/pci: separate zbus creation from scanning")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230306151014.60913-2-schnelle@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The code which handles the ipl report is searching for a free location
in memory where it could copy the component and certificate entries to.
It checks for intersection between the sections required for the kernel
and the component/certificate data area, but fails to check whether
the data structures linking these data areas together intersect.
This might cause the iplreport copy code to overwrite the iplreport
itself. Fix this by adding two addtional intersection checks.
Cc: <stable@vger.kernel.org>
Fixes: 9641b8cc73 ("s390/ipl: read IPL report at early boot")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
since commit 108fc82596e3("tools: Add guest trace agent as a user tool")
introduce virtio-trace/trace-agent, it should be ignored in the git tree.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Message-Id: <tencent_52B2BC2F47540A5FEB46E710BD0C8485B409@qq.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Starting from an used_idx different than 0 is needed in use cases like
virtual machine migration. Not doing so and letting the caller set an
avail idx different than 0 causes destination device to try to use old
buffers that source driver already recover and are not available
anymore.
Since vdpa_sim does not support receive inflight descriptors as a
destination of a migration, let's set both avail_idx and used_idx the
same at vq start. This is how vhost-user works in a
VHOST_SET_VRING_BASE call.
Although the simple fix is to set last_used_idx at vdpasim_set_vq_state,
it would be reset at vdpasim_queue_ready. The last_avail_idx case is
fixed with commit 0e84f918fa ("vdpa_sim: not reset state in
vdpasim_queue_ready"). Since the only option is to make it equal to
last_avail_idx, adding the only change needed here.
This was discovered and tested live migrating the vdpa_sim_net device.
Fixes: 2c53d0f64c ("vdpasim: vDPA device simulator")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230302181857.925374-1-eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently vhost_vdpa_cleanup() unmaps the DMA mappings by calling
`iommu_unmap(v->domain, map->start, map->size);`
from vhost_vdpa_general_unmap() when the parent vDPA driver doesn't
provide DMA config operations.
However, the IOMMU domain referred to by `v->domain` is freed in
vhost_vdpa_free_domain() before vhost_vdpa_cleanup() in
vhost_vdpa_release() which results in NULL pointer de-reference.
Accordingly, moving the call to vhost_vdpa_free_domain() in
vhost_vdpa_cleanup() would makes sense. This will also help
detaching the dma device in error handling of vhost_vdpa_alloc_domain().
This issue was observed on terminating QEMU with SIGQUIT.
Fixes: 037d430556 ("vhost-vdpa: call vhost_vdpa_cleanup during the release")
Signed-off-by: Gautam Dawar <gautam.dawar@amd.com>
Message-Id: <20230301163203.29883-1-gautam.dawar@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
This reverts part of commit 015b8cc5e7 ("wifi: cfg80211: Fix use after
free for wext")
This commit broke WPA offload by unconditionally clearing the crypto
modes for non-WEP connections. Drop that part of the patch.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reported-by: Ilya <me@0upti.me>
Reported-and-tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Fixes: 015b8cc5e7 ("wifi: cfg80211: Fix use after free for wext")
Cc: stable@kernel.org
Link: https://lore.kernel.org/linux-wireless/ZAx0TWRBlGfv7pNl@kroah.com/T/#m11e6e0915ab8fa19ce8bc9695ab288c0fe018edf
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCZA5EKRIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9JJ8AEAsyyMKJ73ETZlac1S4ZOfEsEl1gZ6+cFb
UuuNcz+XfuYBAOHmrFy3DKqLM58Jgf3OUn4C0i7ldNbkv6WTidifVG8B
=rCK8
-----END PGP SIGNATURE-----
Merge tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Two additional bug fixes for v6.3"
* tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: disable hwrng for fTPM on some AMD designs
tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
In da9150_charger_probe, &charger->otg_work is bound with
da9150_charger_otg_work. da9150_charger_otg_ncb may be
called to start the work.
If we remove the module which will call da9150_charger_remove
to make cleanup, there may be a unfinished work. The possible
sequence is as follows:
Fix it by canceling the work before cleanup in the da9150_charger_remove
CPU0 CPUc1
|da9150_charger_otg_work
da9150_charger_remove |
power_supply_unregister |
device_unregister |
power_supply_dev_release|
kfree(psy) |
|
| power_supply_changed(charger->usb);
| //use
Fixes: c1a281e34d ("power: Add support for DA9150 Charger")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS. This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.
This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit b006c439d5 ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.
So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions. As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.
It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.
Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it. If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.
Link: https://www.amd.com/en/support/kb/faq/pa-410
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989
Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/
Fixes: b006c439d5 ("hwrng: core - start hwrng kthread also for untrusted sources")
Cc: stable@vger.kernel.org
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Tested-by: reach622@mailcuk.com
Tested-by: Bell <1138267643@qq.com>
Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The driver will match mostly by DT table (even thought there is regular
ID table) so there is little benefit in of_match_ptr (this also allows
ACPI matching via PRP0001, even though it might not be relevant here).
This also fixes !CONFIG_OF error:
drivers/hwmon/tmp513.c:610:34: error: ‘tmp51x_of_match’ defined but not used [-Werror=unused-const-variable=]
Fixes: 59dfa75e5d ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230312193723.478032-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When probing the ucd90320 access to some of the registers randomly fails.
Sometimes it NACKs a transfer, sometimes it returns just random data and
the PEC check fails.
Experimentation shows that this seems to be triggered by a register access
directly back to back with a previous register write. Experimentation also
shows that inserting a small delay after register writes makes the issue go
away.
Use a similar solution to what the max15301 driver does to solve the same
problem. Create a custom set of bus read and write functions that make sure
that the delay is added.
Fixes: a470f11c5b ("hwmon: (pmbus/ucd9000) Add support for UCD90320 Power Sequencer")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230312160312.2227405-1-lars@metafoo.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
A recent change introduced a flag to queue up errors found during
boot-time polling. These errors will be processed during late init once
the MCE subsystem is fully set up.
A number of sysfs updates call mce_restart() which goes through a subset
of the CPU init flow. This includes polling MCA banks and logging any
errors found. Since the same function is used as boot-time polling,
errors will be queued. However, the system is now past late init, so the
errors will remain queued until another error is found and the workqueue
is triggered.
Call mce_schedule_work() at the end of mce_restart() so that queued
errors are processed.
Fixes: 3bff147b18 ("x86/mce: Defer processing of early errors")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230301221420.2203184-1-yazen.ghannam@amd.com
In xgene_hwmon_probe, &ctx->workq is bound with xgene_hwmon_evt_work.
Then it will be started.
If we remove the driver which will call xgene_hwmon_remove to clean up,
there may be unfinished work.
The possible sequence is as follows:
Fix it by finishing the work before cleanup in xgene_hwmon_remove.
CPU0 CPU1
|xgene_hwmon_evt_work
xgene_hwmon_remove |
kfifo_free(&ctx->async_msg_fifo);|
|
|kfifo_out_spinlocked
|//use &ctx->async_msg_fifo
Fixes: 2ca492e22c ("hwmon: (xgene) Fix crash when alarm occurs before driver probe")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Link: https://lore.kernel.org/r/20230310084007.1403388-1-zyytlz.wz@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* Fix a crash if mount time quotacheck fails when there are inodes
queued for garbage collection.
* Fix an off by one error when discarding folios after writeback
failure.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZAYvQwAKCRBKO3ySh0YR
pjMXAP9X9HozNYESlg/cMq6nY2XfbHIR2qvNOfopiRpWby5xQAEAqBiEhafIJ0A1
mTt+0TqQxDsH+uxr/QEUm76Q7F3f1gE=
=0zU0
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- Fix a crash if mount time quotacheck fails when there are inodes
queued for garbage collection.
- Fix an off by one error when discarding folios after writeback
failure.
* tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix off-by-one-block in xfs_discard_folio()
xfs: quotacheck failure can race with background inode inactivation
Here are 4 small staging driver fixes, and one big staging driver
deletion for 6.3-rc2.
The fixes are:
- rtl8192e driver fixes for where the driver was attempting to execute
various programs directly from the disk for unknown reasons
- rtl8723bs driver fixes for issues found by Hans in testing
The deleted driver is the removal of the r8188eu wireless driver as now
in 6.3-rc1 we have a "real" wifi driver for one that includes support
for many many more devices than this old driver did. So it's time to
remove it as it is no longer needed. The maintainers of this driver all
have acked its removal. Many thanks to them over the years for working
to clean it up and keep it working while the real driver was being
developed.
All of these have been in linux-next this week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZA3mHQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykZRgCeJOPM59FrL5n6MUnxyBfjLW8v/rUAmweESb6C
ofjiP1rkzkE9zocXSQiI
=clcQ
-----END PGP SIGNATURE-----
Merge tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes and removal from Greg KH:
"Here are four small staging driver fixes, and one big staging driver
deletion for 6.3-rc2.
The fixes are:
- rtl8192e driver fixes for where the driver was attempting to
execute various programs directly from the disk for unknown reasons
- rtl8723bs driver fixes for issues found by Hans in testing
The deleted driver is the removal of the r8188eu wireless driver as
now in 6.3-rc1 we have a "real" wifi driver for one that includes
support for many many more devices than this old driver did. So it's
time to remove it as it is no longer needed. The maintainers of this
driver all have acked its removal. Many thanks to them over the years
for working to clean it up and keep it working while the real driver
was being developed.
All of these have been in linux-next this week with no reported
problems"
* tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: delete driver
staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()
staging: rtl8723bs: Fix key-store index handling
staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh
staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script
impact to anything as those machines will fallback to XSAVEC which is
equivalent there.
-----BEGIN PGP SIGNATURE-----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=u6kj
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
"A single erratum fix for AMD machines:
- Disable XSAVES on AMD Zen1 and Zen2 machines due to an erratum. No
impact to anything as those machines will fallback to XSAVEC which
is equivalent there"
* tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Disable XSAVES on AMD family 0x17
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZA2l2QAKCRCRxhvAZXjc
okR1AP9UjPVvVTU3DRp7Giqyv1rdv/iaCVRtEDQmhzDflksioQEAyJXTt+3YOTNl
sSocNYBhVBsijelICeq7hZrmVP9CrgM=
=C0cC
-----END PGP SIGNATURE-----
Merge tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux
Pull clone3 fix from Christian Brauner:
"A simple fix for the clone3() system call.
The CLONE_NEWTIME allows the creation of time namespaces. The flag
reuses a bit from the CSIGNAL bits that are used in the legacy clone()
system call to set the signal that gets sent to the parent after the
child exits.
The clone3() system call doesn't rely on CSIGNAL anymore as it uses a
dedicated .exit_signal field in struct clone_args. So we blocked all
CSIGNAL bits in clone3_args_valid(). When CLONE_NEWTIME was introduced
and reused a CSIGNAL bit we forgot to adapt clone3_args_valid()
causing CLONE_NEWTIME with clone3() to be rejected. Fix this"
* tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
selftests/clone3: test clone3 with CLONE_NEWTIME
fork: allow CLONE_NEWTIME in clone3 flags
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZA2yXAAKCRCRxhvAZXjc
opK7AP0fqkk75P1bRZL36iNOgCV0RDiSN/Ynk/oMYpsOyBndlAD7BKCEZFF2OKzP
aeJrY0F+guwL67X+18X+yiLZrk2rag4=
=2Wa/
-----END PGP SIGNATURE-----
Merge tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs fixes from Christian Brauner:
- When allocating pages for a watch queue failed, we didn't return an
error causing userspace to proceed even though all subsequent
notifcations would be lost. Make sure to return an error.
- Fix a misformed tree entry for the idmapping maintainers entry.
- When setting file leases from an idmapped mount via
generic_setlease() we need to take the idmapping into account
otherwise taking a lease would fail from an idmapped mount.
- Remove two redundant assignments, one in splice code and the other in
locks code, that static checkers complained about.
* tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
filelocks: use mount idmapping for setlease permission check
fs/locks: Remove redundant assignment to cmd
splice: Remove redundant assignment to ret
MAINTAINERS: repair a malformed T: entry in IDMAPPED MOUNTS
watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error paths
potential deadlock during directory renames that was introduced during
the merge window discovered by a combination of syzbot and lockdep.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmQNVwIACgkQ8vlZVpUN
gaMwmgf/ZAasXZEMV0zaQZa8zP4KvMKZjWe6azkcJg4sb/HG9Q7JzeJDCurhhWUj
8+QnyUcuKTyWKYWjGf0f5CZaYEM5AZYij41UJzu2qMkz5hVXSqBVuY8KywxuiJv5
kfuIvQh0Onv0Yrg2qAc52/kZkq1lu2sl/F5ertBWjdpTUXdBUdrCxkUk+1BgQWAj
vNwi1/+gNuX7RxMboHqYmwXFP39vECd+wteNdsiK1hR8bLqL68duLLq8xQdHt4gS
sbVmJKR4j2Giw4ZnlYi9RiwKIO0beqocanp+cfOPulyj5mTM8X1lr0uvaLZgx2AF
lqrS3/5ksp45cRT70qCIz8je70hTSg==
=nN3T
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Bug fixes and regressions for ext4, the most serious of which is a
potential deadlock during directory renames that was introduced during
the merge window discovered by a combination of syzbot and lockdep"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: zero i_disksize when initializing the bootloader inode
ext4: make sure fs error flag setted before clear journal error
ext4: commit super block if fs record error when journal record without error
ext4, jbd2: add an optimized bmap for the journal inode
ext4: fix WARNING in ext4_update_inline_data
ext4: move where set the MAY_INLINE_DATA flag is set
ext4: Fix deadlock during directory rename
ext4: Fix comment about the 64BIT feature
docs: ext4: modify the group desc size to 64
ext4: fix another off-by-one fsmap error on 1k block filesystems
ext4: fix RENAME_WHITEOUT handling for inline directories
ext4: make kobj_type structures constant
ext4: fix cgroup writeback accounting with fs-layer encryption
The cpumask_check() was unnecessarily tight, and causes problems for the
users of cpumask_next().
We have a number of users that take the previous return value of one of
the bit scanning functions and subtract one to keep it in "range". But
since the scanning functions end up returning up to 'small_cpumask_bits'
instead of the tighter 'nr_cpumask_bits', the range really needs to be
using that widened form.
[ This "previous-1" behavior is also the reason we have all those
comments about /* -1 is a legal arg here. */ and separate checks for
that being ok. So we could have just made "small_cpumask_bits-1"
be a similar special "don't check this" value.
Tetsuo Handa even suggested a patch that only does that for
cpumask_next(), since that seems to be the only actual case that
triggers, but that all makes it even _more_ magical and special. So
just relax the check ]
One example of this kind of pattern being the 'c_start()' function in
arch/x86/kernel/cpu/proc.c, but also duplicated in various forms on
other architectures.
Reported-by: syzbot+96cae094d90877641f32@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=96cae094d90877641f32
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Link: https://lore.kernel.org/lkml/c1f4cc16-feea-b83c-82cf-1a1f007b7eb9@I-love.SAKURA.ne.jp/
Fixes: 596ff4a09b ("cpumask: re-introduce constant-sized cpumask optimizations")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Even though we are passing 'ret' as stop condition for
read_poll_timeout(), that return code is still being ignored. The reason
is that the poll will stop if the passed condition is true which will
happen if the passed op() returns error. However, read_poll_timeout()
returns 0 if the *complete* condition evaluates to true. Therefore, the
error code returned by op() will be ignored.
To fix this we need to check for both error codes:
* The one returned by read_poll_timeout() which is either 0 or
ETIMEDOUT.
* The one returned by the passed op().
Fixes: a44ef7c460 ("iio: adc: add max11410 adc driver")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
Link: https://lore.kernel.org/r/20230307095303.713251-1-nuno.sa@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Jiri Kosina, Jonathan Corbet, and Willy Tarreau all expressed a desire
to move this document under process/.
Create a new section for security issues in the index and group it with
embargoed-hardware-issues.
I'm doing this at the start of the series to make all the subsequent
changes show up in 'git blame'.
Existing references were updated using:
git grep -l security-bugs ':!Documentation/translations/' | xargs sed -i 's|admin-guide/security-bugs|process/security-bugs|g'
git grep -l security-bugs Documentation/translations/ | xargs sed -i 's|Documentation/admin-guide/security-bugs|Documentation/process/security-bugs|g'
git grep -l security-bugs Documentation/translations/ | xargs sed -i '/Original:/s|\.\./admin-guide/security-bugs|\.\./process/security-bugs|g'
Notably, the page is not moved in the translations (due to my lack of
knowledge of these languages), but the translations have been updated
to point to the new location of the original document where these
references exist.
Link: https://lore.kernel.org/all/nycvar.YFH.7.76.2206062326230.10851@cbobk.fhfr.pm/
Suggested-by: Jiri Kosina <jikos@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Hu Haowen <src.res@email.cn>
Cc: Federico Vaga <federico.vaga@vaga.pv.it>
Cc: Tsugikazu Shibata <tshibata@ab.jp.nec.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jeimi Lee <jamee.lee@samsung.com>
Cc: Carlos Bilbao <carlos.bilbao@amd.com>
Cc: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Carlos Bilbao <carlos.bilbao@amd.com>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
Acked-by: Federico Vaga <federico.vaga@vaga.pv.it>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20230305220010.20895-2-vegard.nossum@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* final coversions of drivers away from deprecated .probe
* make .probe_new the standard probe and convert I2C core to use it
-----BEGIN PGP SIGNATURE-----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=jm/G
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This marks the end of a transition to let I2C have the same probe
semantics as other subsystems. Uwe took care that no drivers in the
current tree nor in -next use the deprecated .probe call. So, it is a
good time to switch to the new, standard semantics now.
There is also a regression fix:
- regression fix for the notifier handling of the I2C core
- final coversions of drivers away from deprecated .probe
- make .probe_new the standard probe and convert I2C core to use it
* tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: dev: Fix bus callback return values
i2c: Convert drivers to new .probe() callback
i2c: mux: Convert all drivers to new .probe() callback
i2c: Switch .probe() to not take an id parameter
media: i2c: ov2685: convert to i2c's .probe_new()
media: i2c: ov5695: convert to i2c's .probe_new()
w1: ds2482: Convert to i2c's .probe_new()
serial: sc16is7xx: Convert to i2c's .probe_new()
mtd: maps: pismo: Convert to i2c's .probe_new()
misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()
Switching to BLK_MQ_F_BLOCKING wrongly removed the call to
blk_mq_end_request(). Add it back to have our IOs finished
Fixes: 91cc8fbcc8 ("ubi: block: set BLK_MQ_F_BLOCKING")
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/linux-mtd/CAHk-=wi29bbBNh3RqJKu3PxzpjDN5D5K17gEVtXrb7-6bfrnMQ@mail.gmail.com/
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The CIO-DAC series of devices only supports DAC values up to 12-bit
rather than 16-bit. Trying to write a 16-bit value results in only the
lower 12 bits affecting the DAC output which is not what the user
expects. Instead, adjust the DAC write value check to reject values
larger than 12-bit so that they fail explicitly as invalid for the user.
Fixes: 3b8df5fd52 ("iio: Add IIO support for the Measurement Computing CIO-DAC family")
Cc: stable@vger.kernel.org
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Link: https://lore.kernel.org/r/20230311002248.8548-1-william.gray@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Having a per-vcpu virtual offset is a pain. It needs to be synchronized
on each update, and expands badly to a setup where different timers can
have different offsets, or have composite offsets (as with NV).
So let's start by replacing the use of the CNTVOFF_EL2 shadow register
(which we want to reclaim for NV anyway), and make the virtual timer
carry a pointer to a VM-wide offset.
This simplifies the code significantly. It also addresses two terrible bugs:
- The use of CNTVOFF_EL2 leads to some nice offset corruption
when the sysreg gets reset, as reported by Joey.
- The kvm mutex is taken from a vcpu ioctl, which goes against
the locking rules...
Reported-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230224173915.GA17407@e124191.cambridge.arm.com
Tested-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20230224191640.3396734-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) nft_parse_register_load() gets an incorrect datatype size
as input, from Jeremy Sowden.
2) incorrect maximum netlink attribute in nft_redir, also
from Jeremy.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_redir: correct value of inet type `.maxattrs`
netfilter: nft_redir: correct length for loading protocol registers
netfilter: nft_masq: correct length for loading protocol registers
netfilter: nft_nat: correct length for loading protocol registers
====================
Link: https://lore.kernel.org/r/20230309174655.69816-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the boot loader inode has never been used before, the
EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the
i_size to 0. However, if the "never before used" boot loader has a
non-zero i_size, then i_disksize will be non-zero, and the
inconsistency between i_size and i_disksize can trigger a kernel
warning:
WARNING: CPU: 0 PID: 2580 at fs/ext4/file.c:319
CPU: 0 PID: 2580 Comm: bb Not tainted 6.3.0-rc1-00004-g703695902cfa
RIP: 0010:ext4_file_write_iter+0xbc7/0xd10
Call Trace:
vfs_write+0x3b1/0x5c0
ksys_write+0x77/0x160
__x64_sys_write+0x22/0x30
do_syscall_64+0x39/0x80
Reproducer:
1. create corrupted image and mount it:
mke2fs -t ext4 /tmp/foo.img 200
debugfs -wR "sif <5> size 25700" /tmp/foo.img
mount -t ext4 /tmp/foo.img /mnt
cd /mnt
echo 123 > file
2. Run the reproducer program:
posix_memalign(&buf, 1024, 1024)
fd = open("file", O_RDWR | O_DIRECT);
ioctl(fd, EXT4_IOC_SWAP_BOOT);
write(fd, buf, 1024);
Fix this by setting i_disksize as well as i_size to zero when
initiaizing the boot loader inode.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217159
Cc: stable@kernel.org
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20230308032643.641113-1-chengzhihao1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now, jounral error number maybe cleared even though ext4_commit_super()
failed. This may lead to error flag miss, then fsck will miss to check
file system deeply.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307061703.245965-3-yebin@huaweicloud.com
Now, 'es->s_state' maybe covered by recover journal. And journal errno
maybe not recorded in journal sb as IO error. ext4_update_super() only
update error information when 'sbi->s_add_error_count' large than zero.
Then 'EXT4_ERROR_FS' flag maybe lost.
To solve above issue just recover 'es->s_state' error flag after journal
replay like error info.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307061703.245965-2-yebin@huaweicloud.com
The only caller of ext4_find_inline_data_nolock() that needs setting of
EXT4_STATE_MAY_INLINE_DATA flag is ext4_iget_extra_inode(). In
ext4_write_inline_data_end() we just need to update inode->i_inline_off.
Since we are going to add one more caller that does not need to set
EXT4_STATE_MAY_INLINE_DATA, just move setting of EXT4_STATE_MAY_INLINE_DATA
out to ext4_iget_extra_inode().
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230307015253.2232062-2-yebin@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Matthieu Baerts says:
====================
mptcp: fixes for 6.3
Patch 1 fixes a possible deadlock in subflow_error_report() reported by
lockdep. The report was in fact a false positive but the modification
makes sense and silences lockdep to allow syzkaller to find real issues.
The regression has been introduced in v5.12.
Patch 2 is a refactoring needed to be able to fix the two next issues.
It improves the situation and can be backported up to v6.0.
Patches 3 and 4 fix UaF reported by KASAN. It fixes issues potentially
visible since v5.7 and v5.19 but only reproducible until recently
(v6.0). These two patches depend on patch 2/7.
Patch 5 fixes the order of the printed values: expected vs seen values.
The regression has been introduced recently: v6.3-rc1.
Patch 6 adds missing ro_after_init flags. A previous patch added them
for other functions but these two have been missed. This previous patch
has been backported to stable versions (up to v5.12) so probably better
to do the same here.
Patch 7 fixes tcp_set_state() being called twice in a row since v5.10.
Patch 8 fixes another lockdep false positive issue but this time in
MPTCP PM code. Same here, some modifications in the code has been made
to silence this issue and help finding real ones later. This issue can
be seen since v6.2.
v1: https://lore.kernel.org/r/20230227-upstream-net-20230227-mptcp-fixes-v1-0-070e30ae4a8e@tessares.net
====================
Link: https://lore.kernel.org/r/20230227-upstream-net-20230227-mptcp-fixes-v2-0-47c2e95eada9@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christoph reports a lockdep splat in the mptcp_subflow_create_socket()
error path, when such function is invoked by
mptcp_pm_nl_create_listen_socket().
Such code path acquires two separates, nested socket lock, with the
internal lock operation lacking the "nested" annotation. Adding that
in sock_release() for mptcp's sake only could be confusing.
Instead just add a new lockclass to the in-kernel msk socket,
re-initializing the lockdep infra after the socket creation.
Fixes: ad2171009d ("mptcp: fix locking for in-kernel listener creation")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/354
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
