mirror of
https://github.com/torvalds/linux.git
synced 2026-05-28 09:04:39 +02:00
v6.3
1171271 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Paolo Abeni
|
b4c66d755e |
Merge branch 'net-mvpp2-rss-fixes'
Sven Auhagen says: ==================== net: mvpp2: rss fixes This patch series fixes up some rss problems in the mvpp2 driver. The classifier is missing some fragmentation flags, the parser has the QinQ headers switched and the PPPoE Layer 4 detecion is not working correctly. This is leading to no or bad rss for the default settings. ==================== Link: https://lore.kernel.org/r/20230325163903.ofefgus43x66as7i@Svens-MacBookPro.local Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Sven Auhagen
|
031a416c21 |
net: mvpp2: parser fix PPPoE
In PPPoE add all IPv4 header option length to the parser
and adjust the L3 and L4 offset accordingly.
Currently the L4 match does not work with PPPoE and
all packets are matched as L3 IP4 OPT.
Fixes:
|
||
|
Sven Auhagen
|
a587a84813 |
net: mvpp2: parser fix QinQ
The mvpp2 parser entry for QinQ has the inner and outer VLAN
in the wrong order.
Fix the problem by swapping them.
Fixes:
|
||
|
Sven Auhagen
|
9a251cae51 |
net: mvpp2: classifier flow fix fragmentation flags
Add missing IP Fragmentation Flag.
Fixes:
|
||
|
George Guo
|
a6f6a95f25 |
LoongArch, bpf: Fix jit to skip speculation barrier opcode
Just skip the opcode(BPF_ST | BPF_NOSPEC) in the BPF JIT instead of
failing to JIT the entire program, given LoongArch currently has no
couterpart of a speculation barrier instruction. To verify the issue,
use the ltp testcase as shown below.
Also, Wang says:
I can confirm there's currently no speculation barrier equivalent
on LonogArch. (Loongson says there are builtin mitigations for
Spectre-V1 and V2 on their chips, and AFAIK efforts to port the
exploits to mips/LoongArch have all failed a few years ago.)
Without this patch:
$ ./bpf_prog02
[...]
bpf_common.c:123: TBROK: Failed verification: ??? (524)
[...]
Summary:
passed 0
failed 0
broken 1
skipped 0
warnings 0
With this patch:
$ ./bpf_prog02
[...]
Summary:
passed 0
failed 0
broken 0
skipped 0
warnings 0
Fixes:
|
||
|
Martin KaFai Lau
|
580031ff99 |
bpf: tcp: Use sock_gen_put instead of sock_put in bpf_iter_tcp
While reviewing the udp-iter batching patches, noticed the bpf_iter_tcp
calling sock_put() is incorrect. It should call sock_gen_put instead
because bpf_iter_tcp is iterating the ehash table which has the req sk
and tw sk. This patch replaces all sock_put with sock_gen_put in the
bpf_iter_tcp codepath.
Fixes:
|
||
|
Nico Boehr
|
21f27df854 |
KVM: s390: pv: fix external interruption loop not always detected
To determine whether the guest has caused an external interruption loop
upon code 20 (external interrupt) intercepts, the ext_new_psw needs to
be inspected to see whether external interrupts are enabled.
Under non-PV, ext_new_psw can simply be taken from guest lowcore. Under
PV, KVM can only access the encrypted guest lowcore and hence the
ext_new_psw must not be taken from guest lowcore.
handle_external_interrupt() incorrectly did that and hence was not able
to reliably tell whether an external interruption loop is happening or
not. False negatives cause spurious failures of my kvm-unit-test
for extint loops[1] under PV.
Since code 20 is only caused under PV if and only if the guest's
ext_new_psw is enabled for external interrupts, false positive detection
of a external interruption loop can not happen.
Fix this issue by instead looking at the guest PSW in the state
description. Since the PSW swap for external interrupt is done by the
ultravisor before the intercept is caused, this reliably tells whether
the guest is enabled for external interrupts in the ext_new_psw.
Also update the comments to explain better what is happening.
[1] https://lore.kernel.org/kvm/20220812062151.1980937-4-nrb@linux.ibm.com/
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Fixes:
|
||
|
Jakub Kicinski
|
ebd3b82634 |
linux-can-fixes-for-6.3-20230327
-----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmQhjxcTHG1rbEBwZW5n dXRyb25peC5kZQAKCRC+UBxKKooE6NMvB/4lJJXkoCMK6QVL3iJnEvgZKYtkDRC/ j5fktgLM4X6vbZTIpk+hlMGWLXVGgCa5JzuiOmchSwT2JlCBkD0MBQA7EZgQI4M4 JKLv93rIuI6t/AZMAmIMotB6Z/QqGH8NJl7UVdOFGv7Z/qzhjvQ9w7lP66KRtm4S xgaPlgKk0MZbTH+rrmbCrUFlQPBvcak8EyNxpahjjfVplaR8U+AKSIeOghBlvwZZ ohc52wWq2vRMr9Fzc4yAtYf7vJTD+1u5OlmJkpiB/yshCN/BTGJv12m8RlfvIliH cNAJyfetLjtRjXGwilPw0wAJvldjpwy49JK9E5Z5jYOrtWaH5ade20l1 =p3JT -----END PGP SIGNATURE----- Merge tag 'linux-can-fixes-for-6.3-20230327' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2023-03-27 Oleksij Rempel and Hillf Danton contribute a patch for the CAN J1939 protocol that prevents a potential deadlock in j1939_sk_errqueue(). Ivan Orlov fixes an uninit-value in the CAN BCM protocol in the bcm_tx_setup() function. * tag 'linux-can-fixes-for-6.3-20230327' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: bcm: bcm_tx_setup(): fix KMSAN uninit-value in vfs_write can: j1939: prevent deadlock by moving j1939_sk_errqueue() ==================== Link: https://lore.kernel.org/r/20230327124807.1157134-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Lukas Bulwahn
|
4f7702ab6f |
MAINTAINERS: remove the linux-nfc@lists.01.org list
Some MAINTAINERS sections mention to mail patches to the list linux-nfc@lists.01.org. Probably due to changes on Intel's 01.org website and servers, the list server lists.01.org/ml01.01.org is simply gone. Considering emails recorded on lore.kernel.org, only a handful of emails where sent to the linux-nfc@lists.01.org list, and they are usually also sent to the netdev mailing list as well, where they are then picked up. So, there is no big benefit in restoring the linux-nfc elsewhere. Remove all occurrences of the linux-nfc@lists.01.org list in MAINTAINERS. Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/all/CAKXUXMzggxQ43DUZZRkPMGdo5WkzgA=i14ySJUFw4kZfE5ZaZA@mail.gmail.com/ Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230324081613.32000-1-lukas.bulwahn@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Sean Anderson
|
ac9bba3ff1 |
net: fman: Add myself as a reviewer
I've read through or reworked a good portion of this driver. Add myself as a reviewer. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Link: https://lore.kernel.org/r/20230323145957.2999211-1-sean.anderson@seco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Juraj Pecigos
|
1231363aec |
nvme-pci: mark Lexar NM760 as IGNORE_DEV_SUBNQN
A system with more than one of these SSDs will only have one usable. The kernel fails to detect more than one nvme device due to duplicate cntlids. before: [ 9.395229] nvme 0000:01:00.0: platform quirk: setting simple suspend [ 9.395262] nvme nvme0: pci function 0000:01:00.0 [ 9.395282] nvme 0000:03:00.0: platform quirk: setting simple suspend [ 9.395305] nvme nvme1: pci function 0000:03:00.0 [ 9.409873] nvme nvme0: Duplicate cntlid 1 with nvme1, subsys nqn.2022-07.com.siliconmotion:nvm-subsystem-sn- , rejecting [ 9.409982] nvme nvme0: Removing after probe failure status: -22 [ 9.427487] nvme nvme1: allocated 64 MiB host memory buffer. [ 9.445088] nvme nvme1: 16/0/0 default/read/poll queues [ 9.449898] nvme nvme1: Ignoring bogus Namespace Identifiers after: [ 1.161890] nvme 0000:01:00.0: platform quirk: setting simple suspend [ 1.162660] nvme nvme0: pci function 0000:01:00.0 [ 1.162684] nvme 0000:03:00.0: platform quirk: setting simple suspend [ 1.162707] nvme nvme1: pci function 0000:03:00.0 [ 1.191354] nvme nvme0: allocated 64 MiB host memory buffer. [ 1.193378] nvme nvme1: allocated 64 MiB host memory buffer. [ 1.211044] nvme nvme1: 16/0/0 default/read/poll queues [ 1.211080] nvme nvme0: 16/0/0 default/read/poll queues [ 1.216145] nvme nvme0: Ignoring bogus Namespace Identifiers [ 1.216261] nvme nvme1: Ignoring bogus Namespace Identifiers Adding the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk to resolves the issue. Signed-off-by: Juraj Pecigos <kernel@juraj.dev> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Duy Nguyen
|
44378cd113
|
ASoC: da7213.c: add missing pm_runtime_disable()
da7213.c is missing pm_runtime_disable(), thus we will get below error when rmmod -> insmod. $ rmmod snd-soc-da7213.ko $ insmod snd-soc-da7213.ko da7213 0-001a: Unbalanced pm_runtime_enable!" [Kuninori adjusted to latest upstream] Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Khanh Le <khanh.le.xr@renesas.com> Link: https://lore.kernel.org/r/87mt3xg2tk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Filipe Manana
|
2d82a40aa7 |
btrfs: fix deadlock when aborting transaction during relocation with scrub
Before relocating a block group we pause scrub, then do the relocation and
then unpause scrub. The relocation process requires starting and committing
a transaction, and if we have a failure in the critical section of the
transaction commit path (transaction state >= TRANS_STATE_COMMIT_START),
we will deadlock if there is a paused scrub.
That results in stack traces like the following:
[42.479] BTRFS info (device sdc): relocating block group 53876686848 flags metadata|raid6
[42.936] BTRFS warning (device sdc): Skipping commit of aborted transaction.
[42.936] ------------[ cut here ]------------
[42.936] BTRFS: Transaction aborted (error -28)
[42.936] WARNING: CPU: 11 PID: 346822 at fs/btrfs/transaction.c:1977 btrfs_commit_transaction+0xcc8/0xeb0 [btrfs]
[42.936] Modules linked in: dm_flakey dm_mod loop btrfs (...)
[42.936] CPU: 11 PID: 346822 Comm: btrfs Tainted: G W 6.3.0-rc2-btrfs-next-127+ #1
[42.936] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[42.936] RIP: 0010:btrfs_commit_transaction+0xcc8/0xeb0 [btrfs]
[42.936] Code: ff ff 45 8b (...)
[42.936] RSP: 0018:ffffb58649633b48 EFLAGS: 00010282
[42.936] RAX: 0000000000000000 RBX: ffff8be6ef4d5bd8 RCX: 0000000000000000
[42.936] RDX: 0000000000000002 RSI: ffffffffb35e7782 RDI: 00000000ffffffff
[42.936] RBP: ffff8be6ef4d5c98 R08: 0000000000000000 R09: ffffb586496339e8
[42.936] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8be6d38c7c00
[42.936] R13: 00000000ffffffe4 R14: ffff8be6c268c000 R15: ffff8be6ef4d5cf0
[42.936] FS: 00007f381a82b340(0000) GS:ffff8beddfcc0000(0000) knlGS:0000000000000000
[42.936] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[42.936] CR2: 00007f1e35fb7638 CR3: 0000000117680006 CR4: 0000000000370ee0
[42.936] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[42.936] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[42.936] Call Trace:
[42.936] <TASK>
[42.936] ? start_transaction+0xcb/0x610 [btrfs]
[42.936] prepare_to_relocate+0x111/0x1a0 [btrfs]
[42.936] relocate_block_group+0x57/0x5d0 [btrfs]
[42.936] ? btrfs_wait_nocow_writers+0x25/0xb0 [btrfs]
[42.936] btrfs_relocate_block_group+0x248/0x3c0 [btrfs]
[42.936] ? __pfx_autoremove_wake_function+0x10/0x10
[42.936] btrfs_relocate_chunk+0x3b/0x150 [btrfs]
[42.936] btrfs_balance+0x8ff/0x11d0 [btrfs]
[42.936] ? __kmem_cache_alloc_node+0x14a/0x410
[42.936] btrfs_ioctl+0x2334/0x32c0 [btrfs]
[42.937] ? mod_objcg_state+0xd2/0x360
[42.937] ? refill_obj_stock+0xb0/0x160
[42.937] ? seq_release+0x25/0x30
[42.937] ? __rseq_handle_notify_resume+0x3b5/0x4b0
[42.937] ? percpu_counter_add_batch+0x2e/0xa0
[42.937] ? __x64_sys_ioctl+0x88/0xc0
[42.937] __x64_sys_ioctl+0x88/0xc0
[42.937] do_syscall_64+0x38/0x90
[42.937] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[42.937] RIP: 0033:0x7f381a6ffe9b
[42.937] Code: 00 48 89 44 24 (...)
[42.937] RSP: 002b:00007ffd45ecf060 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[42.937] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f381a6ffe9b
[42.937] RDX: 00007ffd45ecf150 RSI: 00000000c4009420 RDI: 0000000000000003
[42.937] RBP: 0000000000000003 R08: 0000000000000013 R09: 0000000000000000
[42.937] R10: 00007f381a60c878 R11: 0000000000000246 R12: 00007ffd45ed0423
[42.937] R13: 00007ffd45ecf150 R14: 0000000000000000 R15: 00007ffd45ecf148
[42.937] </TASK>
[42.937] ---[ end trace 0000000000000000 ]---
[42.937] BTRFS: error (device sdc: state A) in cleanup_transaction:1977: errno=-28 No space left
[59.196] INFO: task btrfs:346772 blocked for more than 120 seconds.
[59.196] Tainted: G W 6.3.0-rc2-btrfs-next-127+ #1
[59.196] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[59.196] task:btrfs state:D stack:0 pid:346772 ppid:1 flags:0x00004002
[59.196] Call Trace:
[59.196] <TASK>
[59.196] __schedule+0x392/0xa70
[59.196] ? __pv_queued_spin_lock_slowpath+0x165/0x370
[59.196] schedule+0x5d/0xd0
[59.196] __scrub_blocked_if_needed+0x74/0xc0 [btrfs]
[59.197] ? __pfx_autoremove_wake_function+0x10/0x10
[59.197] scrub_pause_off+0x21/0x50 [btrfs]
[59.197] scrub_simple_mirror+0x1c7/0x950 [btrfs]
[59.197] ? scrub_parity_put+0x1a5/0x1d0 [btrfs]
[59.198] ? __pfx_autoremove_wake_function+0x10/0x10
[59.198] scrub_stripe+0x20d/0x740 [btrfs]
[59.198] scrub_chunk+0xc4/0x130 [btrfs]
[59.198] scrub_enumerate_chunks+0x3e4/0x7a0 [btrfs]
[59.198] ? __pfx_autoremove_wake_function+0x10/0x10
[59.198] btrfs_scrub_dev+0x236/0x6a0 [btrfs]
[59.199] ? btrfs_ioctl+0xd97/0x32c0 [btrfs]
[59.199] ? _copy_from_user+0x7b/0x80
[59.199] btrfs_ioctl+0xde1/0x32c0 [btrfs]
[59.199] ? refill_stock+0x33/0x50
[59.199] ? should_failslab+0xa/0x20
[59.199] ? kmem_cache_alloc_node+0x151/0x460
[59.199] ? alloc_io_context+0x1b/0x80
[59.199] ? preempt_count_add+0x70/0xa0
[59.199] ? __x64_sys_ioctl+0x88/0xc0
[59.199] __x64_sys_ioctl+0x88/0xc0
[59.199] do_syscall_64+0x38/0x90
[59.199] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[59.199] RIP: 0033:0x7f82ffaffe9b
[59.199] RSP: 002b:00007f82ff9fcc50 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[59.199] RAX: ffffffffffffffda RBX: 000055b191e36310 RCX: 00007f82ffaffe9b
[59.199] RDX: 000055b191e36310 RSI: 00000000c400941b RDI: 0000000000000003
[59.199] RBP: 0000000000000000 R08: 00007fff1575016f R09: 0000000000000000
[59.199] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f82ff9fd640
[59.199] R13: 000000000000006b R14: 00007f82ffa87580 R15: 0000000000000000
[59.199] </TASK>
[59.199] INFO: task btrfs:346773 blocked for more than 120 seconds.
[59.200] Tainted: G W 6.3.0-rc2-btrfs-next-127+ #1
[59.200] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[59.201] task:btrfs state:D stack:0 pid:346773 ppid:1 flags:0x00004002
[59.201] Call Trace:
[59.201] <TASK>
[59.201] __schedule+0x392/0xa70
[59.201] ? __pv_queued_spin_lock_slowpath+0x165/0x370
[59.201] schedule+0x5d/0xd0
[59.201] __scrub_blocked_if_needed+0x74/0xc0 [btrfs]
[59.201] ? __pfx_autoremove_wake_function+0x10/0x10
[59.201] scrub_pause_off+0x21/0x50 [btrfs]
[59.202] scrub_simple_mirror+0x1c7/0x950 [btrfs]
[59.202] ? scrub_parity_put+0x1a5/0x1d0 [btrfs]
[59.202] ? __pfx_autoremove_wake_function+0x10/0x10
[59.202] scrub_stripe+0x20d/0x740 [btrfs]
[59.202] scrub_chunk+0xc4/0x130 [btrfs]
[59.203] scrub_enumerate_chunks+0x3e4/0x7a0 [btrfs]
[59.203] ? __pfx_autoremove_wake_function+0x10/0x10
[59.203] btrfs_scrub_dev+0x236/0x6a0 [btrfs]
[59.203] ? btrfs_ioctl+0xd97/0x32c0 [btrfs]
[59.203] ? _copy_from_user+0x7b/0x80
[59.203] btrfs_ioctl+0xde1/0x32c0 [btrfs]
[59.204] ? should_failslab+0xa/0x20
[59.204] ? kmem_cache_alloc_node+0x151/0x460
[59.204] ? alloc_io_context+0x1b/0x80
[59.204] ? preempt_count_add+0x70/0xa0
[59.204] ? __x64_sys_ioctl+0x88/0xc0
[59.204] __x64_sys_ioctl+0x88/0xc0
[59.204] do_syscall_64+0x38/0x90
[59.204] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[59.204] RIP: 0033:0x7f82ffaffe9b
[59.204] RSP: 002b:00007f82ff1fbc50 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[59.204] RAX: ffffffffffffffda RBX: 000055b191e36790 RCX: 00007f82ffaffe9b
[59.204] RDX: 000055b191e36790 RSI: 00000000c400941b RDI: 0000000000000003
[59.204] RBP: 0000000000000000 R08: 00007fff1575016f R09: 0000000000000000
[59.204] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f82ff1fc640
[59.204] R13: 000000000000006b R14: 00007f82ffa87580 R15: 0000000000000000
[59.204] </TASK>
[59.204] INFO: task btrfs:346774 blocked for more than 120 seconds.
[59.205] Tainted: G W 6.3.0-rc2-btrfs-next-127+ #1
[59.205] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[59.206] task:btrfs state:D stack:0 pid:346774 ppid:1 flags:0x00004002
[59.206] Call Trace:
[59.206] <TASK>
[59.206] __schedule+0x392/0xa70
[59.206] schedule+0x5d/0xd0
[59.206] __scrub_blocked_if_needed+0x74/0xc0 [btrfs]
[59.206] ? __pfx_autoremove_wake_function+0x10/0x10
[59.206] scrub_pause_off+0x21/0x50 [btrfs]
[59.207] scrub_simple_mirror+0x1c7/0x950 [btrfs]
[59.207] ? scrub_parity_put+0x1a5/0x1d0 [btrfs]
[59.207] ? __pfx_autoremove_wake_function+0x10/0x10
[59.207] scrub_stripe+0x20d/0x740 [btrfs]
[59.208] scrub_chunk+0xc4/0x130 [btrfs]
[59.208] scrub_enumerate_chunks+0x3e4/0x7a0 [btrfs]
[59.208] ? __mutex_unlock_slowpath.isra.0+0x9a/0x120
[59.208] btrfs_scrub_dev+0x236/0x6a0 [btrfs]
[59.208] ? btrfs_ioctl+0xd97/0x32c0 [btrfs]
[59.209] ? _copy_from_user+0x7b/0x80
[59.209] btrfs_ioctl+0xde1/0x32c0 [btrfs]
[59.209] ? should_failslab+0xa/0x20
[59.209] ? kmem_cache_alloc_node+0x151/0x460
[59.209] ? alloc_io_context+0x1b/0x80
[59.209] ? preempt_count_add+0x70/0xa0
[59.209] ? __x64_sys_ioctl+0x88/0xc0
[59.209] __x64_sys_ioctl+0x88/0xc0
[59.209] do_syscall_64+0x38/0x90
[59.209] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[59.209] RIP: 0033:0x7f82ffaffe9b
[59.209] RSP: 002b:00007f82fe9fac50 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[59.209] RAX: ffffffffffffffda RBX: 000055b191e36c10 RCX: 00007f82ffaffe9b
[59.209] RDX: 000055b191e36c10 RSI: 00000000c400941b RDI: 0000000000000003
[59.209] RBP: 0000000000000000 R08: 00007fff1575016f R09: 0000000000000000
[59.209] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f82fe9fb640
[59.209] R13: 000000000000006b R14: 00007f82ffa87580 R15: 0000000000000000
[59.209] </TASK>
[59.209] INFO: task btrfs:346775 blocked for more than 120 seconds.
[59.210] Tainted: G W 6.3.0-rc2-btrfs-next-127+ #1
[59.210] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[59.211] task:btrfs state:D stack:0 pid:346775 ppid:1 flags:0x00004002
[59.211] Call Trace:
[59.211] <TASK>
[59.211] __schedule+0x392/0xa70
[59.211] schedule+0x5d/0xd0
[59.211] __scrub_blocked_if_needed+0x74/0xc0 [btrfs]
[59.211] ? __pfx_autoremove_wake_function+0x10/0x10
[59.211] scrub_pause_off+0x21/0x50 [btrfs]
[59.212] scrub_simple_mirror+0x1c7/0x950 [btrfs]
[59.212] ? scrub_parity_put+0x1a5/0x1d0 [btrfs]
[59.212] ? __pfx_autoremove_wake_function+0x10/0x10
[59.212] scrub_stripe+0x20d/0x740 [btrfs]
[59.213] scrub_chunk+0xc4/0x130 [btrfs]
[59.213] scrub_enumerate_chunks+0x3e4/0x7a0 [btrfs]
[59.213] ? __mutex_unlock_slowpath.isra.0+0x9a/0x120
[59.213] btrfs_scrub_dev+0x236/0x6a0 [btrfs]
[59.213] ? btrfs_ioctl+0xd97/0x32c0 [btrfs]
[59.214] ? _copy_from_user+0x7b/0x80
[59.214] btrfs_ioctl+0xde1/0x32c0 [btrfs]
[59.214] ? should_failslab+0xa/0x20
[59.214] ? kmem_cache_alloc_node+0x151/0x460
[59.214] ? alloc_io_context+0x1b/0x80
[59.214] ? preempt_count_add+0x70/0xa0
[59.214] ? __x64_sys_ioctl+0x88/0xc0
[59.214] __x64_sys_ioctl+0x88/0xc0
[59.214] do_syscall_64+0x38/0x90
[59.214] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[59.214] RIP: 0033:0x7f82ffaffe9b
[59.214] RSP: 002b:00007f82fe1f9c50 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[59.214] RAX: ffffffffffffffda RBX: 000055b191e37090 RCX: 00007f82ffaffe9b
[59.214] RDX: 000055b191e37090 RSI: 00000000c400941b RDI: 0000000000000003
[59.214] RBP: 0000000000000000 R08: 00007fff1575016f R09: 0000000000000000
[59.214] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f82fe1fa640
[59.214] R13: 000000000000006b R14: 00007f82ffa87580 R15: 0000000000000000
[59.214] </TASK>
[59.214] INFO: task btrfs:346776 blocked for more than 120 seconds.
[59.215] Tainted: G W 6.3.0-rc2-btrfs-next-127+ #1
[59.216] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[59.217] task:btrfs state:D stack:0 pid:346776 ppid:1 flags:0x00004002
[59.217] Call Trace:
[59.217] <TASK>
[59.217] __schedule+0x392/0xa70
[59.217] ? __pv_queued_spin_lock_slowpath+0x165/0x370
[59.217] schedule+0x5d/0xd0
[59.217] __scrub_blocked_if_needed+0x74/0xc0 [btrfs]
[59.217] ? __pfx_autoremove_wake_function+0x10/0x10
[59.217] scrub_pause_off+0x21/0x50 [btrfs]
[59.217] scrub_simple_mirror+0x1c7/0x950 [btrfs]
[59.217] ? scrub_parity_put+0x1a5/0x1d0 [btrfs]
[59.218] ? __pfx_autoremove_wake_function+0x10/0x10
[59.218] scrub_stripe+0x20d/0x740 [btrfs]
[59.218] scrub_chunk+0xc4/0x130 [btrfs]
[59.218] scrub_enumerate_chunks+0x3e4/0x7a0 [btrfs]
[59.219] ? __pfx_autoremove_wake_function+0x10/0x10
[59.219] btrfs_scrub_dev+0x236/0x6a0 [btrfs]
[59.219] ? btrfs_ioctl+0xd97/0x32c0 [btrfs]
[59.219] ? _copy_from_user+0x7b/0x80
[59.219] btrfs_ioctl+0xde1/0x32c0 [btrfs]
[59.219] ? should_failslab+0xa/0x20
[59.219] ? kmem_cache_alloc_node+0x151/0x460
[59.219] ? alloc_io_context+0x1b/0x80
[59.219] ? preempt_count_add+0x70/0xa0
[59.219] ? __x64_sys_ioctl+0x88/0xc0
[59.219] __x64_sys_ioctl+0x88/0xc0
[59.219] do_syscall_64+0x38/0x90
[59.219] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[59.219] RIP: 0033:0x7f82ffaffe9b
[59.219] RSP: 002b:00007f82fd9f8c50 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[59.219] RAX: ffffffffffffffda RBX: 000055b191e37510 RCX: 00007f82ffaffe9b
[59.219] RDX: 000055b191e37510 RSI: 00000000c400941b RDI: 0000000000000003
[59.219] RBP: 0000000000000000 R08: 00007fff1575016f R09: 0000000000000000
[59.219] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f82fd9f9640
[59.219] R13: 000000000000006b R14: 00007f82ffa87580 R15: 0000000000000000
[59.219] </TASK>
[59.219] INFO: task btrfs:346822 blocked for more than 120 seconds.
[59.220] Tainted: G W 6.3.0-rc2-btrfs-next-127+ #1
[59.221] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[59.222] task:btrfs state:D stack:0 pid:346822 ppid:1 flags:0x00004002
[59.222] Call Trace:
[59.222] <TASK>
[59.222] __schedule+0x392/0xa70
[59.222] schedule+0x5d/0xd0
[59.222] btrfs_scrub_cancel+0x91/0x100 [btrfs]
[59.222] ? __pfx_autoremove_wake_function+0x10/0x10
[59.222] btrfs_commit_transaction+0x572/0xeb0 [btrfs]
[59.223] ? start_transaction+0xcb/0x610 [btrfs]
[59.223] prepare_to_relocate+0x111/0x1a0 [btrfs]
[59.223] relocate_block_group+0x57/0x5d0 [btrfs]
[59.223] ? btrfs_wait_nocow_writers+0x25/0xb0 [btrfs]
[59.223] btrfs_relocate_block_group+0x248/0x3c0 [btrfs]
[59.224] ? __pfx_autoremove_wake_function+0x10/0x10
[59.224] btrfs_relocate_chunk+0x3b/0x150 [btrfs]
[59.224] btrfs_balance+0x8ff/0x11d0 [btrfs]
[59.224] ? __kmem_cache_alloc_node+0x14a/0x410
[59.224] btrfs_ioctl+0x2334/0x32c0 [btrfs]
[59.225] ? mod_objcg_state+0xd2/0x360
[59.225] ? refill_obj_stock+0xb0/0x160
[59.225] ? seq_release+0x25/0x30
[59.225] ? __rseq_handle_notify_resume+0x3b5/0x4b0
[59.225] ? percpu_counter_add_batch+0x2e/0xa0
[59.225] ? __x64_sys_ioctl+0x88/0xc0
[59.225] __x64_sys_ioctl+0x88/0xc0
[59.225] do_syscall_64+0x38/0x90
[59.225] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[59.225] RIP: 0033:0x7f381a6ffe9b
[59.225] RSP: 002b:00007ffd45ecf060 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[59.225] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f381a6ffe9b
[59.225] RDX: 00007ffd45ecf150 RSI: 00000000c4009420 RDI: 0000000000000003
[59.225] RBP: 0000000000000003 R08: 0000000000000013 R09: 0000000000000000
[59.225] R10: 00007f381a60c878 R11: 0000000000000246 R12: 00007ffd45ed0423
[59.225] R13: 00007ffd45ecf150 R14: 0000000000000000 R15: 00007ffd45ecf148
[59.225] </TASK>
What happens is the following:
1) A scrub is running, so fs_info->scrubs_running is 1;
2) Task A starts block group relocation, and at btrfs_relocate_chunk() it
pauses scrub by calling btrfs_scrub_pause(). That increments
fs_info->scrub_pause_req from 0 to 1 and waits for the scrub task to
pause (for fs_info->scrubs_paused to be == to fs_info->scrubs_running);
3) The scrub task pauses at scrub_pause_off(), waiting for
fs_info->scrub_pause_req to decrease to 0;
4) Task A then enters btrfs_relocate_block_group(), and down that call
chain we start a transaction and then attempt to commit it;
5) When task A calls btrfs_commit_transaction(), it either will do the
commit itself or wait for some other task that already started the
commit of the transaction - it doesn't matter which case;
6) The transaction commit enters state TRANS_STATE_COMMIT_START;
7) An error happens during the transaction commit, like -ENOSPC when
running delayed refs or delayed items for example;
8) This results in calling transaction.c:cleanup_transaction(), where
we call btrfs_scrub_cancel(), incrementing fs_info->scrub_cancel_req
from 0 to 1, and blocking this task waiting for fs_info->scrubs_running
to decrease to 0;
9) From this point on, both the transaction commit and the scrub task
hang forever:
1) The transaction commit is waiting for fs_info->scrubs_running to
be decreased to 0;
2) The scrub task is at scrub_pause_off() waiting for
fs_info->scrub_pause_req to decrease to 0 - so it can not proceed
to stop the scrub and decrement fs_info->scrubs_running from 0 to 1.
Therefore resulting in a deadlock.
Fix this by having cleanup_transaction(), called if a transaction commit
fails, not call btrfs_scrub_cancel() if relocation is in progress, and
having btrfs_relocate_block_group() call btrfs_scrub_cancel() instead if
the relocation failed and a transaction abort happened.
This was triggered with btrfs/061 from fstests.
Fixes:
|
||
|
Anand Jain
|
50d281fc43 |
btrfs: scan device in non-exclusive mode
This fixes mkfs/mount/check failures due to race with systemd-udevd
scan.
During the device scan initiated by systemd-udevd, other user space
EXCL operations such as mkfs, mount, or check may get blocked and result
in a "Device or resource busy" error. This is because the device
scan process opens the device with the EXCL flag in the kernel.
Two reports were received:
- btrfs/179 test case, where the fsck command failed with the -EBUSY
error
- LTP pwritev03 test case, where mkfs.vfs failed with
the -EBUSY error, when mkfs.vfs tried to overwrite old btrfs filesystem
on the device.
In both cases, fsck and mkfs (respectively) were racing with a
systemd-udevd device scan, and systemd-udevd won, resulting in the
-EBUSY error for fsck and mkfs.
Reproducing the problem has been difficult because there is a very
small window during which these userspace threads can race to
acquire the exclusive device open. Even on the system where the problem
was observed, the problem occurrences were anywhere between 10 to 400
iterations and chances of reproducing decreases with debug printk()s.
However, an exclusive device open is unnecessary for the scan process,
as there are no write operations on the device during scan. Furthermore,
during the mount process, the superblock is re-read in the below
function call chain:
btrfs_mount_root
btrfs_open_devices
open_fs_devices
btrfs_open_one_device
btrfs_get_bdev_and_sb
So, to fix this issue, removes the FMODE_EXCL flag from the scan
operation, and add a comment.
The case where mkfs may still write to the device and a scan is running,
the btrfs signature is not written at that time so scan will not
recognize such device.
Reported-by: Sherry Yang <sherry.yang@oracle.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202303170839.fdf23068-oliver.sang@intel.com
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
||
|
Filipe Manana
|
2f1a6be12a |
btrfs: fix race between quota disable and quota assign ioctls
The quota assign ioctl can currently run in parallel with a quota disable ioctl call. The assign ioctl uses the quota root, while the disable ioctl frees that root, and therefore we can have a use-after-free triggered in the assign ioctl, leading to a trace like the following when KASAN is enabled: [672.723][T736] BUG: KASAN: slab-use-after-free in btrfs_search_slot+0x2962/0x2db0 [672.723][T736] Read of size 8 at addr ffff888022ec0208 by task btrfs_search_sl/27736 [672.724][T736] [672.725][T736] CPU: 1 PID: 27736 Comm: btrfs_search_sl Not tainted 6.3.0-rc3 #37 [672.723][T736] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [672.727][T736] Call Trace: [672.728][T736] <TASK> [672.728][T736] dump_stack_lvl+0xd9/0x150 [672.725][T736] print_report+0xc1/0x5e0 [672.720][T736] ? __virt_addr_valid+0x61/0x2e0 [672.727][T736] ? __phys_addr+0xc9/0x150 [672.725][T736] ? btrfs_search_slot+0x2962/0x2db0 [672.722][T736] kasan_report+0xc0/0xf0 [672.729][T736] ? btrfs_search_slot+0x2962/0x2db0 [672.724][T736] btrfs_search_slot+0x2962/0x2db0 [672.723][T736] ? fs_reclaim_acquire+0xba/0x160 [672.722][T736] ? split_leaf+0x13d0/0x13d0 [672.726][T736] ? rcu_is_watching+0x12/0xb0 [672.723][T736] ? kmem_cache_alloc+0x338/0x3c0 [672.722][T736] update_qgroup_status_item+0xf7/0x320 [672.724][T736] ? add_qgroup_rb+0x3d0/0x3d0 [672.739][T736] ? do_raw_spin_lock+0x12d/0x2b0 [672.730][T736] ? spin_bug+0x1d0/0x1d0 [672.737][T736] btrfs_run_qgroups+0x5de/0x840 [672.730][T736] ? btrfs_qgroup_rescan_worker+0xa70/0xa70 [672.738][T736] ? __del_qgroup_relation+0x4ba/0xe00 [672.738][T736] btrfs_ioctl+0x3d58/0x5d80 [672.735][T736] ? tomoyo_path_number_perm+0x16a/0x550 [672.737][T736] ? tomoyo_execute_permission+0x4a0/0x4a0 [672.731][T736] ? btrfs_ioctl_get_supported_features+0x50/0x50 [672.737][T736] ? __sanitizer_cov_trace_switch+0x54/0x90 [672.734][T736] ? do_vfs_ioctl+0x132/0x1660 [672.730][T736] ? vfs_fileattr_set+0xc40/0xc40 [672.730][T736] ? _raw_spin_unlock_irq+0x2e/0x50 [672.732][T736] ? sigprocmask+0xf2/0x340 [672.737][T736] ? __fget_files+0x26a/0x480 [672.732][T736] ? bpf_lsm_file_ioctl+0x9/0x10 [672.738][T736] ? btrfs_ioctl_get_supported_features+0x50/0x50 [672.736][T736] __x64_sys_ioctl+0x198/0x210 [672.736][T736] do_syscall_64+0x39/0xb0 [672.731][T736] entry_SYSCALL_64_after_hwframe+0x63/0xcd [672.739][T736] RIP: 0033:0x4556ad [672.742][T736] </TASK> [672.743][T736] [672.748][T736] Allocated by task 27677: [672.743][T736] kasan_save_stack+0x22/0x40 [672.741][T736] kasan_set_track+0x25/0x30 [672.741][T736] __kasan_kmalloc+0xa4/0xb0 [672.749][T736] btrfs_alloc_root+0x48/0x90 [672.746][T736] btrfs_create_tree+0x146/0xa20 [672.744][T736] btrfs_quota_enable+0x461/0x1d20 [672.743][T736] btrfs_ioctl+0x4a1c/0x5d80 [672.747][T736] __x64_sys_ioctl+0x198/0x210 [672.749][T736] do_syscall_64+0x39/0xb0 [672.744][T736] entry_SYSCALL_64_after_hwframe+0x63/0xcd [672.756][T736] [672.757][T736] Freed by task 27677: [672.759][T736] kasan_save_stack+0x22/0x40 [672.759][T736] kasan_set_track+0x25/0x30 [672.756][T736] kasan_save_free_info+0x2e/0x50 [672.751][T736] ____kasan_slab_free+0x162/0x1c0 [672.758][T736] slab_free_freelist_hook+0x89/0x1c0 [672.752][T736] __kmem_cache_free+0xaf/0x2e0 [672.752][T736] btrfs_put_root+0x1ff/0x2b0 [672.759][T736] btrfs_quota_disable+0x80a/0xbc0 [672.752][T736] btrfs_ioctl+0x3e5f/0x5d80 [672.756][T736] __x64_sys_ioctl+0x198/0x210 [672.753][T736] do_syscall_64+0x39/0xb0 [672.765][T736] entry_SYSCALL_64_after_hwframe+0x63/0xcd [672.769][T736] [672.768][T736] The buggy address belongs to the object at ffff888022ec0000 [672.768][T736] which belongs to the cache kmalloc-4k of size 4096 [672.769][T736] The buggy address is located 520 bytes inside of [672.769][T736] freed 4096-byte region [ffff888022ec0000, ffff888022ec1000) [672.760][T736] [672.764][T736] The buggy address belongs to the physical page: [672.761][T736] page:ffffea00008bb000 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x22ec0 [672.766][T736] head:ffffea00008bb000 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [672.779][T736] flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff) [672.770][T736] raw: 00fff00000010200 ffff888012842140 ffffea000054ba00 dead000000000002 [672.770][T736] raw: 0000000000000000 0000000000040004 00000001ffffffff 0000000000000000 [672.771][T736] page dumped because: kasan: bad access detected [672.778][T736] page_owner tracks the page as allocated [672.777][T736] page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd2040(__GFP_IO|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 88 [672.779][T736] get_page_from_freelist+0x119c/0x2d50 [672.779][T736] __alloc_pages+0x1cb/0x4a0 [672.776][T736] alloc_pages+0x1aa/0x270 [672.773][T736] allocate_slab+0x260/0x390 [672.771][T736] ___slab_alloc+0xa9a/0x13e0 [672.778][T736] __slab_alloc.constprop.0+0x56/0xb0 [672.771][T736] __kmem_cache_alloc_node+0x136/0x320 [672.789][T736] __kmalloc+0x4e/0x1a0 [672.783][T736] tomoyo_realpath_from_path+0xc3/0x600 [672.781][T736] tomoyo_path_perm+0x22f/0x420 [672.782][T736] tomoyo_path_unlink+0x92/0xd0 [672.780][T736] security_path_unlink+0xdb/0x150 [672.788][T736] do_unlinkat+0x377/0x680 [672.788][T736] __x64_sys_unlink+0xca/0x110 [672.789][T736] do_syscall_64+0x39/0xb0 [672.783][T736] entry_SYSCALL_64_after_hwframe+0x63/0xcd [672.784][T736] page last free stack trace: [672.787][T736] free_pcp_prepare+0x4e5/0x920 [672.787][T736] free_unref_page+0x1d/0x4e0 [672.784][T736] __unfreeze_partials+0x17c/0x1a0 [672.797][T736] qlist_free_all+0x6a/0x180 [672.796][T736] kasan_quarantine_reduce+0x189/0x1d0 [672.797][T736] __kasan_slab_alloc+0x64/0x90 [672.793][T736] kmem_cache_alloc+0x17c/0x3c0 [672.799][T736] getname_flags.part.0+0x50/0x4e0 [672.799][T736] getname_flags+0x9e/0xe0 [672.792][T736] vfs_fstatat+0x77/0xb0 [672.791][T736] __do_sys_newlstat+0x84/0x100 [672.798][T736] do_syscall_64+0x39/0xb0 [672.796][T736] entry_SYSCALL_64_after_hwframe+0x63/0xcd [672.790][T736] [672.791][T736] Memory state around the buggy address: [672.799][T736] ffff888022ec0100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [672.805][T736] ffff888022ec0180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [672.802][T736] >ffff888022ec0200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [672.809][T736] ^ [672.809][T736] ffff888022ec0280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [672.809][T736] ffff888022ec0300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fix this by having the qgroup assign ioctl take the qgroup ioctl mutex before calling btrfs_run_qgroups(), which is what all qgroup ioctls should call. Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CAFcO6XN3VD8ogmHwqRk4kbiwtpUSNySu2VAxN8waEPciCHJvMA@mail.gmail.com/ CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
||
|
Alyssa Ross
|
bb430b6942 |
loop: LOOP_CONFIGURE: send uevents for partitions
LOOP_CONFIGURE is, as far as I understand it, supposed to be a way to
combine LOOP_SET_FD and LOOP_SET_STATUS64 into a single syscall. When
using LOOP_SET_FD+LOOP_SET_STATUS64, a single uevent would be sent for
each partition found on the loop device after the second ioctl(), but
when using LOOP_CONFIGURE, no such uevent was being sent.
In the old setup, uevents are disabled for LOOP_SET_FD, but not for
LOOP_SET_STATUS64. This makes sense, as it prevents uevents being
sent for a partially configured device during LOOP_SET_FD - they're
only sent at the end of LOOP_SET_STATUS64. But for LOOP_CONFIGURE,
uevents were disabled for the entire operation, so that final
notification was never issued. To fix this, reduce the critical
section to exclude the loop_reread_partitions() call, which causes
the uevents to be issued, to after uevents are re-enabled, matching
the behaviour of the LOOP_SET_FD+LOOP_SET_STATUS64 combination.
I noticed this because Busybox's losetup program recently changed from
using LOOP_SET_FD+LOOP_SET_STATUS64 to LOOP_CONFIGURE, and this broke
my setup, for which I want a notification from the kernel any time a
new partition becomes available.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
[hch: reduced the critical section]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixes:
|
||
|
Linus Torvalds
|
3a93e40326 |
RISC-V:
* Fix VM hang in case of timer delta being zero
ARM:
* Fixes for the MMU:
* Read the MMU notifier seq before dropping the mmap lock to guard
against reading a potentially stale VMA
* Disable interrupts when walking user page tables to protect against
the page table being freed
* Read the MTE permissions for the VMA within the mmap lock critical
section, avoiding the use of a potentally stale VMA pointer
* Fixes for the vPMU:
* Return the sum of the current perf event value and PMC snapshot for
reads from userspace
* Don't save the value of guest writes to PMCR_EL0.{C,P}, which could
otherwise lead to userspace erroneously resetting the vPMU during VM
save/restore
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmQh12wUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMPyAgAhe9P5efFlkg/N/BUoxCdiQjhTEGO
BbNtZFbSgdqsTA0No5sjSsq8+dYuj4IpYHxvTRNXffxpn/6x736x9ff6fH3QwY0P
n65q37m3XrBzbaUv2XlX6l4GJC/KHWpXsawVszmnQpw8wYUYglo9JWnWVvpo/vLV
byWXcG9Rt0MQVnV13bYtjnpdNYCdVuhZuvjDBvbBa2I9BRKShvWyzcRcc48K1RNq
UI5PCEb8c2NUOB/6b9lRkEaNYLssVLOxpI3abGJP+IVSl/WE+hgCbFpz7ZkYwt79
AYm4wnZTSKBMQb5P2IOlgkfasvEyFiZ4Jj7x3RLXcXSWIB6g0J20iNasYg==
=qX9k
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"RISC-V:
- Fix VM hang in case of timer delta being zero
ARM:
- MMU fixes:
- Read the MMU notifier seq before dropping the mmap lock to guard
against reading a potentially stale VMA
- Disable interrupts when walking user page tables to protect
against the page table being freed
- Read the MTE permissions for the VMA within the mmap lock
critical section, avoiding the use of a potentally stale VMA
pointer
- vPMU fixes:
- Return the sum of the current perf event value and PMC snapshot
for reads from userspace
- Don't save the value of guest writes to PMCR_EL0.{C,P}, which
could otherwise lead to userspace erroneously resetting the vPMU
during VM save/restore"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
riscv/kvm: Fix VM hang in case of timer delta being zero.
KVM: arm64: Check for kvm_vma_mte_allowed in the critical section
KVM: arm64: Disable interrupts while walking userspace PTs
KVM: arm64: Retry fault if vma_lookup() results become invalid
KVM: arm64: PMU: Don't save PMCR_EL0.{C,P} for the vCPU
KVM: arm64: PMU: Fix GET_ONE_REG for vPMC regs to return the current value
|
||
|
Rafael J. Wysocki
|
c56610a869 |
ACPI: bus: Rework system-level device notification handling
For ACPI drivers that provide a ->notify() callback and set ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be invoked while either the ->add() or the ->remove() callback is running without any synchronization at the bus type level which is counter to the common-sense expectation that notification handling should only be enabled when the driver is actually bound to the device. As a result, if the driver is not careful enough, it's ->notify() callback may crash when it is invoked too early or too late [1]. This issue has been amplified by commit |
||
|
Linus Torvalds
|
91fe204578 |
platform-drivers-x86 for v6.3-3
Highlights: - Intel tpmi/vsec fixes - think-lmi fixes - 2 other small fixes / hw-id additions The following is an automated git shortlog grouped by driver: platform/surface: - aggregator: Add missing fwnode_handle_put() platform/x86 (gigabyte-wmi): - Add support for A320M-S2H V2 platform/x86/intel: - tpmi: Revise the comment of intel_vsec_add_aux - tpmi: Fix double free in tpmi_create_device() - vsec: Fix a memory leak in intel_vsec_add_aux think-lmi: - Add possible_values for ThinkStation - only display possible_values if available - use correct possible_values delimiters - add missing type attribute -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmQhfPAUHGhkZWdvZWRl QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9x7PQf+NhIvs4KWPUiHMGz2w7xt2bls6agA ZyQB50UDNDt4JBQG6ZYdMd0d1oFoov8E1869vMccHTPNDKrpju0j8zVULuCJlJ0R 5MmcKKgbq5l3pBPxuTXY9MIHX0zGd8vuG4tcRQIBLttHvj5T4Dbny3+ohGEf9b4o HlwkUBTWjO0LK6NPa4IWC1lZbmsXncEQYy4CaxtQGUN754EdlGfuBhn3o1MKIgoD B6HEBH3MSr81UhvYPWGvB6X7qk1vXUW0K+3B375+pLxVSPsjVDOHBQ2BovDC8Enc KVXPl4vGd6ZpVtU8kEj7kiyhFGrkCXUxQ2IbkuqL9iuiy7AZzi1O4Cwygw== =i/tZ -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: - Intel tpmi/vsec fixes - think-lmi fixes - two other small fixes / hw-id additions * tag 'platform-drivers-x86-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/surface: aggregator: Add missing fwnode_handle_put() platform/x86: think-lmi: Add possible_values for ThinkStation platform/x86: think-lmi: only display possible_values if available platform/x86: think-lmi: use correct possible_values delimiters platform/x86: think-lmi: add missing type attribute platform/x86 (gigabyte-wmi): Add support for A320M-S2H V2 platform/x86/intel: tpmi: Revise the comment of intel_vsec_add_aux platform/x86/intel: tpmi: Fix double free in tpmi_create_device() platform/x86/intel: vsec: Fix a memory leak in intel_vsec_add_aux |
||
|
Linus Torvalds
|
fc5d1a9233 |
Raw NAND controller driver fixes:
* meson:
- Invalidate cache on polling ECC bit
- Initialize struct with zeroes
* nandsim: Artificially prevent sequential page reads
ECC engine driver fixes:
* mxic-ecc: Fix mxic_ecc_data_xfer_wait_for_completion() when irq is used
Binging fixes:
* jedec,spi-nor: Document CPOL/CPHA support
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmQhTz0ACgkQJWrqGEe9
VoQ4pQf/RFWoA3FVAWZAakknPFDlCw7si1zmtvLzRDEJ9vqWpYpcs0jCeY0nFryV
FgeCZC67BeEIYO/o2Wb/6iZtlWQV0CIsOpdj9Nx7TfUBJC3ZheU0bU3uZnSC6m96
rwJ55QFrA1JIbH0OBYEjq3Spkf3A4WnYTOEc+JxV1JjYD4JcWa82UgP2qHQc7pIr
tTgjvgWNvDYxCeHk2a79cwMbS5roKi8FKHnGHtAfjDoFvYYGeSM9M0XTUfpneHRC
PlpVnNwzwy+eEqo9tlvFCAOgyiZL/+Rqc/AE5/CxM7C8BTjccCFn8Hw2eVh7kkf1
PhigYZtLJOFFfNrOFdUeOlE2i8E3Bw==
=l91F
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
"Raw NAND controller driver fixes:
- meson:
- Invalidate cache on polling ECC bit
- Initialize struct with zeroes
- nandsim: Artificially prevent sequential page reads
ECC engine driver fixes:
- mxic-ecc: Fix mxic_ecc_data_xfer_wait_for_completion() when irq is
used
Binging fixes:
- jedec,spi-nor: Document CPOL/CPHA support"
* tag 'mtd/fixes-for-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: meson: invalidate cache on polling ECC bit
mtd: rawnand: nandsim: Artificially prevent sequential page reads
dt-bindings: mtd: jedec,spi-nor: Document CPOL/CPHA support
mtd: nand: mxic-ecc: Fix mxic_ecc_data_xfer_wait_for_completion() when irq is used
mtd: rawnand: meson: initialize struct with zeroes
|
||
|
Marc Gonzalez
|
f9d323e7c1 |
perf/amlogic: adjust register offsets
Commit "perf/amlogic: resolve conflict between canvas & pmu"
changed the base address.
Fixes:
|
||
|
Heiko Carstens
|
f9bbf25e7b |
s390/ptrace: fix PTRACE_GET_LAST_BREAK error handling
Return -EFAULT if put_user() for the PTRACE_GET_LAST_BREAK request fails, instead of silently ignoring it. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Jiri Slaby (SUSE)
|
7bb2107e63 |
s390: reintroduce expoline dependence to scripts
Expolines depend on scripts/basic/fixdep. And build of expolines can now
race with the fixdep build:
make[1]: *** Deleting file 'arch/s390/lib/expoline/expoline.o'
/bin/sh: line 1: scripts/basic/fixdep: Permission denied
make[1]: *** [../scripts/Makefile.build:385: arch/s390/lib/expoline/expoline.o] Error 126
make: *** [../arch/s390/Makefile:166: expoline_prepare] Error 2
The dependence was removed in the below Fixes: commit. So reintroduce
the dependence on scripts.
Fixes:
|
||
|
Tony Krowiak
|
8f8cf76758 |
s390/vfio-ap: fix memory leak in vfio_ap device driver
The device release callback function invoked to release the matrix device
uses the dev_get_drvdata(device *dev) function to retrieve the
pointer to the vfio_matrix_dev object in order to free its storage. The
problem is, this object is not stored as drvdata with the device; since the
kfree function will accept a NULL pointer, the memory for the
vfio_matrix_dev object is never freed.
Since the device being released is contained within the vfio_matrix_dev
object, the container_of macro will be used to retrieve its pointer.
Fixes:
|
||
|
Heiko Carstens
|
89aba4c26f |
s390/uaccess: add missing earlyclobber annotations to __clear_user()
Add missing earlyclobber annotation to size, to, and tmp2 operands of the
__clear_user() inline assembly since they are modified or written to before
the last usage of all input operands. This can lead to incorrect register
allocation for the inline assembly.
Fixes:
|
||
|
Sean Christopherson
|
80962ec912 |
KVM: nVMX: Do not report error code when synthesizing VM-Exit from Real Mode
Don't report an error code to L1 when synthesizing a nested VM-Exit and
L2 is in Real Mode. Per Intel's SDM, regarding the error code valid bit:
This bit is always 0 if the VM exit occurred while the logical processor
was in real-address mode (CR0.PE=0).
The bug was introduced by a recent fix for AMD's Paged Real Mode, which
moved the error code suppression from the common "queue exception" path
to the "inject exception" path, but missed VMX's "synthesize VM-Exit"
path.
Fixes:
|
||
|
Sean Christopherson
|
6c41468c7c |
KVM: x86: Clear "has_error_code", not "error_code", for RM exception injection
When injecting an exception into a vCPU in Real Mode, suppress the error
code by clearing the flag that tracks whether the error code is valid, not
by clearing the error code itself. The "typo" was introduced by recent
fix for SVM's funky Paged Real Mode.
Opportunistically hoist the logic above the tracepoint so that the trace
is coherent with respect to what is actually injected (this was also the
behavior prior to the buggy commit).
Fixes:
|
||
|
Marc Gonzalez
|
33acea2049 |
arm64: dts: meson-g12-common: resolve conflict between canvas & pmu
According to S905X2 Datasheet - Revision 07:
DMC_MON area spans 0xff638080-0xff6380c0
DDR_PLL area spans 0xff638c00-0xff638c34
Round DDR_PLL area size up to 0x40
Fixes:
|
||
|
Sean Christopherson
|
0dc902267c |
KVM: x86: Suppress pending MMIO write exits if emulator detects exception
Clear vcpu->mmio_needed when injecting an exception from the emulator to squash a (legitimate) warning about vcpu->mmio_needed being true at the start of KVM_RUN without a callback being registered to complete the userspace MMIO exit. Suppressing the MMIO write exit is inarguably wrong from an architectural perspective, but it is the least awful hack-a-fix due to shortcomings in KVM's uAPI, not to mention that KVM already suppresses MMIO writes in this scenario. Outside of REP string instructions, KVM doesn't provide a way to resume an instruction at the exact point where it was "interrupted" if said instruction partially completed before encountering an MMIO access. For MMIO reads, KVM immediately exits to userspace upon detecting MMIO as userspace provides the to-be-read value in a buffer, and so KVM can safely (more or less) restart the instruction from the beginning. When the emulator re-encounters the MMIO read, KVM will service the MMIO by getting the value from the buffer instead of exiting to userspace, i.e. KVM won't put the vCPU into an infinite loop. On an emulated MMIO write, KVM finishes the instruction before exiting to userspace, as exiting immediately would ultimately hang the vCPU due to the aforementioned shortcoming of KVM not being able to resume emulation in the middle of an instruction. For the vast majority of _emulated_ instructions, deferring the userspace exit doesn't cause problems as very few x86 instructions (again ignoring string operations) generate multiple writes. But for instructions that generate multiple writes, e.g. PUSHA (multiple pushes onto the stack), deferring the exit effectively results in only the final write triggering an exit to userspace. KVM does support multiple MMIO "fragments", but only for page splits; if an instruction performs multiple distinct MMIO writes, the number of fragments gets reset when the next MMIO write comes along and any previous MMIO writes are dropped. Circling back to the warning, if a deferred MMIO write coincides with an exception, e.g. in this case a #SS due to PUSHA underflowing the stack after queueing a write to an MMIO page on a previous push, KVM injects the exceptions and leaves the deferred MMIO pending without registering a callback, thus triggering the splat. Sweep the problem under the proverbial rug as dropping MMIO writes is not unique to the exception scenario (see above), i.e. instructions like PUSHA are fundamentally broken with respect to MMIO, and have been since KVM's inception. Reported-by: zhangjianguo <zhangjianguo18@huawei.com> Reported-by: syzbot+760a73552f47a8cd0fd9@syzkaller.appspotmail.com Reported-by: syzbot+8accb43ddc6bd1f5713a@syzkaller.appspotmail.com Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230322141220.2206241-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Marc Gonzalez
|
aec4353114 |
arm64: dts: meson-g12-common: specify full DMC range
According to S905X2 Datasheet - Revision 07:
DRAM Memory Controller (DMC) register area spans ff638000-ff63a000.
According to DeviceTree Specification - Release v0.4-rc1:
simple-bus nodes do not require reg property.
Fixes:
|
||
|
Dmytro Maluka
|
fef8f2b90e |
KVM: x86/ioapic: Resample the pending state of an IRQ when unmasking
KVM irqfd based emulation of level-triggered interrupts doesn't work
quite correctly in some cases, particularly in the case of interrupts
that are handled in a Linux guest as oneshot interrupts (IRQF_ONESHOT).
Such an interrupt is acked to the device in its threaded irq handler,
i.e. later than it is acked to the interrupt controller (EOI at the end
of hardirq), not earlier.
Linux keeps such interrupt masked until its threaded handler finishes,
to prevent the EOI from re-asserting an unacknowledged interrupt.
However, with KVM + vfio (or whatever is listening on the resamplefd)
we always notify resamplefd at the EOI, so vfio prematurely unmasks the
host physical IRQ, thus a new physical interrupt is fired in the host.
This extra interrupt in the host is not a problem per se. The problem is
that it is unconditionally queued for injection into the guest, so the
guest sees an extra bogus interrupt. [*]
There are observed at least 2 user-visible issues caused by those
extra erroneous interrupts for a oneshot irq in the guest:
1. System suspend aborted due to a pending wakeup interrupt from
ChromeOS EC (drivers/platform/chrome/cros_ec.c).
2. Annoying "invalid report id data" errors from ELAN0000 touchpad
(drivers/input/mouse/elan_i2c_core.c), flooding the guest dmesg
every time the touchpad is touched.
The core issue here is that by the time when the guest unmasks the IRQ,
the physical IRQ line is no longer asserted (since the guest has
acked the interrupt to the device in the meantime), yet we
unconditionally inject the interrupt queued into the guest by the
previous resampling. So to fix the issue, we need a way to detect that
the IRQ is no longer pending, and cancel the queued interrupt in this
case.
With IOAPIC we are not able to probe the physical IRQ line state
directly (at least not if the underlying physical interrupt controller
is an IOAPIC too), so in this patch we use irqfd resampler for that.
Namely, instead of injecting the queued interrupt, we just notify the
resampler that this interrupt is done. If the IRQ line is actually
already deasserted, we are done. If it is still asserted, a new
interrupt will be shortly triggered through irqfd and injected into the
guest.
In the case if there is no irqfd resampler registered for this IRQ, we
cannot fix the issue, so we keep the existing behavior: immediately
unconditionally inject the queued interrupt.
This patch fixes the issue for x86 IOAPIC only. In the long run, we can
fix it for other irqchips and other architectures too, possibly taking
advantage of reading the physical state of the IRQ line, which is
possible with some other irqchips (e.g. with arm64 GIC, maybe even with
the legacy x86 PIC).
[*] In this description we assume that the interrupt is a physical host
interrupt forwarded to the guest e.g. by vfio. Potentially the same
issue may occur also with a purely virtual interrupt from an
emulated device, e.g. if the guest handles this interrupt, again, as
a oneshot interrupt.
Signed-off-by: Dmytro Maluka <dmy@semihalf.com>
Link: https://lore.kernel.org/kvm/31420943-8c5f-125c-a5ee-d2fde2700083@semihalf.com/
Link: https://lore.kernel.org/lkml/87o7wrug0w.wl-maz@kernel.org/
Message-Id: <20230322204344.50138-3-dmy@semihalf.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
||
|
Dmytro Maluka
|
d583fbd706 |
KVM: irqfd: Make resampler_list an RCU list
It is useful to be able to do read-only traversal of the list of all the registered irqfd resamplers without locking the resampler_lock mutex. In particular, we are going to traverse it to search for a resampler registered for the given irq of an irqchip, and that will be done with an irqchip spinlock (ioapic->lock) held, so it is undesirable to lock a mutex in this context. So turn this list into an RCU list. For protecting the read side, reuse kvm->irq_srcu which is already used for protecting a number of irq related things (kvm->irq_routing, irqfd->resampler->list, kvm->irq_ack_notifier_list, kvm->arch.mask_notifier_list). Signed-off-by: Dmytro Maluka <dmy@semihalf.com> Message-Id: <20230322204344.50138-2-dmy@semihalf.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Jeremi Piotrowski
|
e5c972c1fa |
KVM: SVM: Flush Hyper-V TLB when required
The Hyper-V "EnlightenedNptTlb" enlightenment is always enabled when KVM
is running on top of Hyper-V and Hyper-V exposes support for it (which
is always). On AMD CPUs this enlightenment results in ASID invalidations
not flushing TLB entries derived from the NPT. To force the underlying
(L0) hypervisor to rebuild its shadow page tables, an explicit hypercall
is needed.
The original KVM implementation of Hyper-V's "EnlightenedNptTlb" on SVM
only added remote TLB flush hooks. This worked out fine for a while, as
sufficient remote TLB flushes where being issued in KVM to mask the
problem. Since v5.17, changes in the TDP code reduced the number of
flushes and the out-of-sync TLB prevents guests from booting
successfully.
Split svm_flush_tlb_current() into separate callbacks for the 3 cases
(guest/all/current), and issue the required Hyper-V hypercall when a
Hyper-V TLB flush is needed. The most important case where the TLB flush
was missing is when loading a new PGD, which is followed by what is now
svm_flush_tlb_current().
Cc: stable@vger.kernel.org # v5.17+
Fixes:
|
||
|
Paolo Bonzini
|
9e347ba030 |
KVM/riscv fixes for 6.3, take #1
- Fix VM hang in case of timer delta being zero -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEZdn75s5e6LHDQ+f/rUjsVaLHLAcFAmQUI3wACgkQrUjsVaLH LAegrw//VbFOzCfwHCHJjAaEK5V6TaeROfDvBFnpPsktj/qqyVtKZQ6RaRBQ8+M/ MVKjBIWu27jiHdjSutbQhyb4bDFk36L374Pcmp5JXN5NintGfMNfAK6ZEAWpCBXd t6/UydtM7DoncrosZpin2JuvzfKlD8vu2Um3zI1mmkbzx4YQfpf9f1JLuuguH5/r 4ChPBalhOnmSF/phgBwmgyYWFxN0mhmGNydjb6/+PFb6Dkz6G2sPYIVos7hRRmTh FT21RAJgmVYs+b7la4eormmI/fxHSCYv80/AGFu9BxMANchxgKBwOqZUx6ZrNBrX l3H/VRP8x0MNDvu8Mah0QSsC9sF2Wnpodi7FJfOWF9T4A+DIzujVL+rRB5cAgMxP K1YeaMEIGsr/k3awokGV+CuE2yefarYYypru1pVzZl0XiEp0BIKIAdqslcVaX1c2 a71kcxBKG2LnVR2YAh+UAALBVfgxgUcoYewuxyXEP1GIXtlkfmHrjD64dtfIXar4 tMuo/vqAPvtQf4czLdZuJ1k/m3RFMz3XTtW+BjSI9yOGk8g6xWrab6y4FZehgcpl G3eHq0PlpygqoZgCQDDs+aHogMXF/H5YPTUntSW9AEyEx0DTUwUjESFSCAyjzGuj nWUdgieHbtuxksvtJSKe7c7aTf9pyj3guMNhRkWD0e8ebie2ogk= =lDDD -----END PGP SIGNATURE----- Merge tag 'kvm-riscv-fixes-6.3-1' of https://github.com/kvm-riscv/linux into HEAD KVM/riscv fixes for 6.3, take #1 - Fix VM hang in case of timer delta being zero |
||
|
Paolo Bonzini
|
8607daa214 |
KVM/arm64 fixes for 6.3, part #2
Fixes for a rather interesting set of bugs relating to the MMU:
- Read the MMU notifier seq before dropping the mmap lock to guard
against reading a potentially stale VMA
- Disable interrupts when walking user page tables to protect against
the page table being freed
- Read the MTE permissions for the VMA within the mmap lock critical
section, avoiding the use of a potentally stale VMA pointer
Additionally, some fixes targeting the vPMU:
- Return the sum of the current perf event value and PMC snapshot for
reads from userspace
- Don't save the value of guest writes to PMCR_EL0.{C,P}, which could
otherwise lead to userspace erroneously resetting the vPMU during VM
save/restore
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZBPXKAAKCRCivnWIJHzd
Ftz7AP9+mxPPS2h9ly/wV+rCR6gg/ZqemXf+0rGJZWgkscUrbAD/XGnKhlAZZZeW
/9qoEtWnAguhz8vOg8oPbtJ2c2reDwk=
=RcGY
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.3, part #2
Fixes for a rather interesting set of bugs relating to the MMU:
- Read the MMU notifier seq before dropping the mmap lock to guard
against reading a potentially stale VMA
- Disable interrupts when walking user page tables to protect against
the page table being freed
- Read the MTE permissions for the VMA within the mmap lock critical
section, avoiding the use of a potentally stale VMA pointer
Additionally, some fixes targeting the vPMU:
- Return the sum of the current perf event value and PMC snapshot for
reads from userspace
- Don't save the value of guest writes to PMCR_EL0.{C,P}, which could
otherwise lead to userspace erroneously resetting the vPMU during VM
save/restore
|
||
|
Thomas Weißschuh
|
441d901fbf |
platform/x86: gigabyte-wmi: add support for B650 AORUS ELITE AX
This has been reported as working. Suggested-by: got3nks <got3nks@users.noreply.github.com> Link: https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/15#issuecomment-1483942966 Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20230327-gigabyte-wmi-b650-elite-ax-v1-1-d4d645c21d0b@weissschuh.net Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
||
|
Ivan Orlov
|
2b4c99f7d9 |
can: bcm: bcm_tx_setup(): fix KMSAN uninit-value in vfs_write
Syzkaller reported the following issue:
=====================================================
BUG: KMSAN: uninit-value in aio_rw_done fs/aio.c:1520 [inline]
BUG: KMSAN: uninit-value in aio_write+0x899/0x950 fs/aio.c:1600
aio_rw_done fs/aio.c:1520 [inline]
aio_write+0x899/0x950 fs/aio.c:1600
io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019
__do_sys_io_submit fs/aio.c:2078 [inline]
__se_sys_io_submit+0x293/0x770 fs/aio.c:2048
__x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was created at:
slab_post_alloc_hook mm/slab.h:766 [inline]
slab_alloc_node mm/slub.c:3452 [inline]
__kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491
__do_kmalloc_node mm/slab_common.c:967 [inline]
__kmalloc+0x11d/0x3b0 mm/slab_common.c:981
kmalloc_array include/linux/slab.h:636 [inline]
bcm_tx_setup+0x80e/0x29d0 net/can/bcm.c:930
bcm_sendmsg+0x3a2/0xce0 net/can/bcm.c:1351
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
sock_write_iter+0x495/0x5e0 net/socket.c:1108
call_write_iter include/linux/fs.h:2189 [inline]
aio_write+0x63a/0x950 fs/aio.c:1600
io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019
__do_sys_io_submit fs/aio.c:2078 [inline]
__se_sys_io_submit+0x293/0x770 fs/aio.c:2048
__x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
CPU: 1 PID: 5034 Comm: syz-executor350 Not tainted 6.2.0-rc6-syzkaller-80422-geda666ff2276 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
=====================================================
We can follow the call chain and find that 'bcm_tx_setup' function
calls 'memcpy_from_msg' to copy some content to the newly allocated
frame of 'op->frames'. After that the 'len' field of copied structure
being compared with some constant value (64 or 8). However, if
'memcpy_from_msg' returns an error, we will compare some uninitialized
memory. This triggers 'uninit-value' issue.
This patch will add 'memcpy_from_msg' possible errors processing to
avoid uninit-value issue.
Tested via syzkaller
Reported-by: syzbot+c9bfd85eca611ebf5db1@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=47f897f8ad958bbde5790ebf389b5e7e0a345089
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Fixes:
|
||
|
Rajvi Jingar
|
fb5755100a |
platform/x86/intel/pmc: Alder Lake PCH slp_s0_residency fix
For platforms with Alder Lake PCH (Alder Lake S and Raptor Lake S) the
slp_s0_residency attribute has been reporting the wrong value. Unlike other
platforms, ADL PCH does not have a counter for the time that the SLP_S0
signal was asserted. Instead, firmware uses the aggregate of the Low Power
Mode (LPM) substate counters as the S0ix value. Since the LPM counters run
at a different frequency, this lead to misreporting of the S0ix time.
Add a check for Alder Lake PCH and adjust the frequency accordingly when
display slp_s0_residency.
Fixes:
|
||
|
Chris Wilson
|
5c95b2d5d4 |
drm/i915/perf: Drop wakeref on GuC RC error
If we fail to adjust the GuC run-control on opening the perf stream, make sure we unwind the wakeref just taken. v2: Retain old goto label names (Ashutosh) v3: Drop bitfield boolean Fixes: |
||
|
Ville Syrjälä
|
3413881e1e |
drm/i915/dpt: Treat the DPT BO as a framebuffer
Currently i915_gem_object_is_framebuffer() doesn't treat the BO containing the framebuffer's DPT as a framebuffer itself. This means eg. that the shrinker can evict the DPT BO while leaving the actual FB BO bound, when the DPT is allocated from regular shmem. That causes an immediate oops during hibernate as we try to rewrite the PTEs inside the already evicted DPT obj. TODO: presumably this might also be the reason for the DPT related display faults under heavy memory pressure, but I'm still not sure how that would happen as the object should be pinned by intel_dpt_pin() while in active use by the display engine... Cc: stable@vger.kernel.org Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Imre Deak <imre.deak@intel.com> Fixes: |
||
|
Chris Wilson
|
d032ca43f2 |
drm/i915/gem: Flush lmem contents after construction
i915_gem_object_create_lmem_from_data() lacks the flush of the data written to lmem to ensure the object is marked as dirty and the writes flushed to the backing store. Once created, we can immediately release the obj->mm.mapping caching of the vmap. Fixes: |
||
|
Imre Deak
|
38c5830194 |
drm/i915/tc: Fix the ICL PHY ownership check in TC-cold state
The commit renaming icl_tc_phy_is_in_safe_mode() to icl_tc_phy_take_ownership() didn't flip the function's return value accordingly, fix this up. This didn't cause an actual problem besides state check errors, since the function is only used during HW readout. Cc: José Roberto de Souza <jose.souza@intel.com> Fixes: |
||
|
Ville Syrjälä
|
a2b6e99d8a |
drm/i915: Disable DC states for all commits
Keeping DC states enabled is incompatible with the _noarm()/_arm() split we use for writing pipe/plane registers. When DC5 and PSR are enabled, all pipe/plane registers effectively become self-arming on account of DC5 exit arming the update, and PSR exit latching it. What probably saves us most of the time is that (with PIPE_MISC[21]=0) all pipe register writes themselves trigger PSR exit, and then we don't re-enter PSR until the idle frame count has elapsed. So it may be that the PSR exit happens already before we've updated the state too much. Also the PSR1 panel (at least on this KBL) seems to discard the first frame we trasmit, presumably still scanning out from its internal framebuffer at that point. So only the second frame we transmit is actually visible. But I suppose that could also be panel specific behaviour. I haven't checked out how other PSR panels behave, nor did I bother to check what the eDP spec has to say about this. And since this really is all about DC states, let's switch from the MODESET domain to the DC_OFF domain. Functionally they are 100% identical. We should probably remove the MODESET domain... And for good measure let's toss in an assert to the place where we do the _noarm() register writes to make sure DC states are in fact off. v2: Just use intel_display_power_is_enabled() (Imre) Cc: <stable@vger.kernel.org> #v5.17+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Fixes: |
||
|
Ville Syrjälä
|
4d4e766f8b |
drm/i915: Workaround ICL CSC_MODE sticky arming
Unlike SKL/GLK the ICL CSC unit suffers from a new issue where CSC_MODE arming is sticky. That is, once armed it remains armed causing the CSC coeff/offset registers to become effectively self-arming. CSC coeff/offset registers writes no longer disarm the CSC, but fortunately register read still do. So we can use that to disarm the CSC unit once the registers for the current frame have been latched. This avoid s the self-arming behaviour from persisting into the next frame's .color_commit_noarm() call. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Fixes: |
||
|
Ville Syrjälä
|
c880f855d1 |
drm/i915: Add a .color_post_update() hook
We're going to need stuff after the color management
register latching has happened. Add a corresponding hook.
Cc: <stable@vger.kernel.org> #v5.19+
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-4-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit
|
||
|
Ville Syrjälä
|
a8e03e00b6 |
drm/i915: Move CSC load back into .color_commit_arm() when PSR is enabled on skl/glk
SKL/GLK CSC unit suffers from a nasty issue where a CSC coeff/offset register read or write between DC5 exit and PSR exit will undo the CSC arming performed by DMC, and then during PSR exit the hardware will latch zeroes into the active CSC registers. This causes any plane going through the CSC to output all black. We can sidestep the issue by making sure the PSR exit has already actually happened before we touch the CSC coeff/offset registers. Easiest way to guarantee that is to just move the CSC programming back into the .color_commir_arm() as we force a PSR exit (and crucially wait for it to actually happen) prior to touching the arming registers. When PSR (and thus also DC states) are disabled we don't have anything to worry about, so we can keep using the more optional _noarm() hook for writing the CSC registers. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8283 Fixes: |
||
|
Ville Syrjälä
|
76b767d4d1 |
drm/i915: Split icl_color_commit_noarm() from skl_color_commit_noarm()
We're going to want different behavior for skl/glk vs. icl
in .color_commit_noarm(), so split the hook into two. Arguably
we already had slightly different behaviour since
csc_enable/gamma_enable are never set on icl+, so the old
code was perhaps a bit confusing as well.
Cc: <stable@vger.kernel.org> #v5.19+
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Drew Davenport <ddavenport@chromium.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-2-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit
|
||
|
Ashutosh Dixit
|
12d4eb20d9 |
drm/i915/pmu: Use functions common with sysfs to read actual freq
Expose intel_rps_read_actual_frequency_fw to read the actual freq without taking forcewake for use by PMU. The code is refactored to use a common set of functions across sysfs and PMU. Using common functions with sysfs in PMU solves the issues of missing support for MTL and missing support for older generations (prior to Gen6). It also future proofs the PMU where sometimes code has been updated for sysfs and PMU has been missed. v2: Remove runtime_pm_if_in_use from read_actual_frequency_fw (Tvrtko) v3: (Tvrtko) - Remove goto in __read_cagf - Unexport intel_rps_get_cagf and intel_rps_read_punit_req Fixes: |
||
|
Vladimir Oltean
|
a7602e7332 |
net: stmmac: don't reject VLANs when IFF_PROMISC is set
The blamed commit has introduced the following tests to
dwmac4_add_hw_vlan_rx_fltr(), called from stmmac_vlan_rx_add_vid():
if (hw->promisc) {
netdev_err(dev,
"Adding VLAN in promisc mode not supported\n");
return -EPERM;
}
"VLAN promiscuous" mode is keyed in this driver to IFF_PROMISC, and so,
vlan_vid_add() and vlan_vid_del() calls cannot take place in IFF_PROMISC
mode. I have the following 2 arguments that this restriction is.... hm,
how shall I put it nicely... unproductive :)
First, take the case of a Linux bridge. If the kernel is compiled with
CONFIG_BRIDGE_VLAN_FILTERING=y, then this bridge shall have a VLAN
database. The bridge shall try to call vlan_add_vid() on its bridge
ports for each VLAN in the VLAN table. It will do this irrespectively of
whether that port is *currently* VLAN-aware or not. So it will do this
even when the bridge was created with vlan_filtering 0.
But the Linux bridge, in VLAN-unaware mode, configures its ports in
promiscuous (IFF_PROMISC) mode, so that they accept packets with any
MAC DA (a switch must do this in order to forward those packets which
are not directly targeted to its MAC address).
As a result, the stmmac driver does not work as a bridge port, when the
kernel is compiled with CONFIG_BRIDGE_VLAN_FILTERING=y.
$ ip link add br0 type bridge && ip link set br0 up
$ ip link set eth0 master br0 && ip link set eth0 up
[ 2333.943296] br0: port 1(eth0) entered blocking state
[ 2333.943381] br0: port 1(eth0) entered disabled state
[ 2333.943782] device eth0 entered promiscuous mode
[ 2333.944080] 4033c000.ethernet eth0: Adding VLAN in promisc mode not supported
[ 2333.976509] 4033c000.ethernet eth0: failed to initialize vlan filtering on this port
RTNETLINK answers: Operation not permitted
Secondly, take the case of stmmac as DSA master. Some switch tagging
protocols are based on 802.1Q VLANs (tag_sja1105.c), and as such,
tag_8021q.c uses vlan_vid_add() to work with VLAN-filtering DSA masters.
But also, when a DSA port becomes promiscuous (for example when it joins
a bridge), the DSA framework also makes the DSA master promiscuous.
Moreover, for every VLAN that a DSA switch sends to the CPU, DSA also
programs a VLAN filter on the DSA master, because if the the DSA switch
uses a tail tag, then the hardware frame parser of the DSA master will
see VLAN as VLAN, and might filter them out, for being unknown.
Due to the above 2 reasons, my belief is that the stmmac driver does not
get to choose to not accept vlan_vid_add() calls while IFF_PROMISC is
enabled, because the 2 are completely independent and there are code
paths in the network stack which directly lead to this situation
occurring, without the user's direct input.
In fact, my belief is that "VLAN promiscuous" mode should have never
been keyed on IFF_PROMISC in the first place, but rather, on the
NETIF_F_HW_VLAN_CTAG_FILTER feature flag which can be toggled by the
user through ethtool -k, when present in netdev->hw_features.
In the stmmac driver, NETIF_F_HW_VLAN_CTAG_FILTER is only present in
"features", making this feature "on [fixed]".
I have this belief because I am unaware of any definition of promiscuity
which implies having an effect on anything other than MAC DA (therefore
not VLAN). However, I seem to be rather alone in having this opinion,
looking back at the disagreements from this discussion:
https://lore.kernel.org/netdev/20201110153958.ci5ekor3o2ekg3ky@ipetronik.com/
In any case, to remove the vlan_vid_add() dependency on !IFF_PROMISC,
one would need to remove the check and see what fails. I guess the test
was there because of the way in which dwmac4_vlan_promisc_enable() is
implemented.
For context, the dwmac4 supports Perfect Filtering for a limited number
of VLANs - dwmac4_get_num_vlan(), priv->hw->num_vlan, with a fallback on
Hash Filtering - priv->dma_cap.vlhash - see stmmac_vlan_update(), also
visible in cat /sys/kernel/debug/stmmaceth/eth0/dma_cap | grep 'VLAN
Hash Filtering'.
The perfect filtering is based on MAC_VLAN_Tag_Filter/MAC_VLAN_Tag_Data
registers, accessed in the driver through dwmac4_write_vlan_filter().
The hash filtering is based on the MAC_VLAN_Hash_Table register, named
GMAC_VLAN_HASH_TABLE in the driver and accessed by dwmac4_update_vlan_hash().
The control bit for enabling hash filtering is GMAC_VLAN_VTHM
(MAC_VLAN_Tag_Ctrl bit VTHM: VLAN Tag Hash Table Match Enable).
Now, the description of dwmac4_vlan_promisc_enable() is that it iterates
through the driver's cache of perfect filter entries (hw->vlan_filter[i],
added by dwmac4_add_hw_vlan_rx_fltr()), and evicts them from hardware by
unsetting their GMAC_VLAN_TAG_DATA_VEN (MAC_VLAN_Tag_Data bit VEN - VLAN
Tag Enable) bit. Then it unsets the GMAC_VLAN_VTHM bit, which disables
hash matching.
This leaves the MAC, according to table "VLAN Match Status" from the
documentation, to always enter these data paths:
VID |VLAN Perfect Filter |VTHM Bit |VLAN Hash Filter |Final VLAN Match
|Match Result | |Match Result |Status
-------|--------------------|---------|-----------------|----------------
VID!=0 |Fail |0 |don't care |Pass
So, dwmac4_vlan_promisc_enable() does its job, but by unsetting
GMAC_VLAN_VTHM, it conflicts with the other code path which controls
this bit: dwmac4_update_vlan_hash(), called through stmmac_update_vlan_hash()
from stmmac_vlan_rx_add_vid() and from stmmac_vlan_rx_kill_vid().
This is, I guess, why dwmac4_add_hw_vlan_rx_fltr() is not allowed to run
after dwmac4_vlan_promisc_enable() has unset GMAC_VLAN_VTHM: because if
it did, then dwmac4_update_vlan_hash() would set GMAC_VLAN_VTHM again,
breaking the "VLAN promiscuity".
It turns out that dwmac4_vlan_promisc_enable() is way too complicated
for what needs to be done. The MAC_Packet_Filter register also has the
VTFE bit (VLAN Tag Filter Enable), which simply controls whether VLAN
tagged packets which don't match the filtering tables (either perfect or
hash) are dropped or not. At the moment, this driver unconditionally
sets GMAC_PACKET_FILTER_VTFE if NETIF_F_HW_VLAN_CTAG_FILTER was detected
through the priv->dma_cap.vlhash capability bits of the device, in
stmmac_dvr_probe().
I would suggest deleting the unnecessarily complex logic from
dwmac4_vlan_promisc_enable(), and simply unsetting GMAC_PACKET_FILTER_VTFE
when becoming IFF_PROMISC, which has the same effect of allowing packets
with any VLAN tags, but has the additional benefit of being able to run
concurrently with stmmac_vlan_rx_add_vid() and stmmac_vlan_rx_kill_vid().
As much as I believe that the VTFE bit should have been exclusively
controlled by NETIF_F_HW_VLAN_CTAG_FILTER through ethtool, and not by
IFF_PROMISC, changing that is not a punctual fix to the problem, and it
would probably break the VFFQ feature added by the later commit
|
||
|
Oleksij Rempel
|
d1366b283d |
can: j1939: prevent deadlock by moving j1939_sk_errqueue()
This commit addresses a deadlock situation that can occur in certain
scenarios, such as when running data TP/ETP transfer and subscribing to
the error queue while receiving a net down event. The deadlock involves
locks in the following order:
3
j1939_session_list_lock -> active_session_list_lock
j1939_session_activate
...
j1939_sk_queue_activate_next -> sk_session_queue_lock
...
j1939_xtp_rx_eoma_one
2
j1939_sk_queue_drop_all -> sk_session_queue_lock
...
j1939_sk_netdev_event_netdown -> j1939_socks_lock
j1939_netdev_notify
1
j1939_sk_errqueue -> j1939_socks_lock
__j1939_session_cancel -> active_session_list_lock
j1939_tp_rxtimer
CPU0 CPU1
---- ----
lock(&priv->active_session_list_lock);
lock(&jsk->sk_session_queue_lock);
lock(&priv->active_session_list_lock);
lock(&priv->j1939_socks_lock);
The solution implemented in this commit is to move the
j1939_sk_errqueue() call out of the active_session_list_lock context,
thus preventing the deadlock situation.
Reported-by: syzbot+ee1cd780f69483a8616b@syzkaller.appspotmail.com
Fixes:
|