Current link for NAPI documentation in ice driver doesn't work - it
returns 404. Update the link to the working one.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The PF controls the set of queues that the RDMA auxiliary_driver requests
resources from. The set_channel command will alter that pool and trigger a
reconfiguration of the VSI, which breaks RDMA functionality.
Prevent set_channel from executing when RDMA driver bound to auxiliary
device.
Adding a locked variable to pass down the call chain to avoid double
locking the device_lock.
Fixes: 348048e724 ("ice: Implement iidc operations")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If st_uid/st_gid doesn't have a mapping in the mounter's user_ns, then
copy-up should fail, just like it would fail if the mounter task was doing
the copy using "cp -a".
There's a corner case where the "cp -a" would succeed but copy up fail: if
there's a mapping of the invalid uid/gid (65534 by default) in the user
namespace. This is because stat(2) will return this value if the mapping
doesn't exist in the current user_ns and "cp -a" will in turn be able to
create a file with this uid/gid.
This behavior would be inconsistent with POSIX ACL's, which return -1 for
invalid uid/gid which result in a failed copy.
For consistency and simplicity fail the copy of the st_uid/st_gid are
invalid.
Fixes: 459c7c565a ("ovl: unprivieged mounts")
Cc: <stable@vger.kernel.org> # v5.11
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Seth Forshee <sforshee@kernel.org>
Drain requests all go through io_drain_req, which has a quick exit in case
there is nothing pending (ie the drain is not useful). In that case it can
run the issue the request immediately.
However for safety it queues it through task work.
The problem is that in this case the request is run asynchronously, but
the async work has not been prepared through io_req_prep_async.
This has not been a problem up to now, as the task work always would run
before returning to userspace, and so the user would not have a chance to
race with it.
However - with IORING_SETUP_DEFER_TASKRUN - this is no longer the case and
the work might be defered, giving userspace a chance to change data being
referred to in the request.
Instead _always_ prep_async for drain requests, which is simpler anyway
and removes this issue.
Cc: stable@vger.kernel.org
Fixes: c0e0d6ba25 ("io_uring: add IORING_SETUP_DEFER_TASKRUN")
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20230127105911.2420061-1-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In dma_fence_allocate_private_stub() set the signaling bit of the newly
allocated private stub fence rather than the signaling bit of the
shared dma_fence_stub.
Cc: <stable@vger.kernel.org> # v6.1
Fixes: c85d00d4fd ("dma-buf: set signaling bit for the stub fence")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126002844.339593-1-dakr@redhat.com
Following line should listen for a rising edge and exit after the first
one since '-c 1' is provided.
# gpio-event-mon -n gpiochip1 -o 0 -r -c 1
It works with kernel 4.19 but it doesn't work with 5.10. In 5.10 the
above command doesn't exit after the first rising edge it keep listening
for an event forever. The '-c 1' is not taken into an account.
The problem is in commit 62757c32d5 ("tools: gpio: add multi-line
monitoring to gpio-event-mon").
Before this commit the iterator 'i' in monitor_device() is used for
counting of the events (loops). In the case of the above command (-c 1)
we should start from 0 and increment 'i' only ones and hit the 'break'
statement and exit the process. But after the above commit counting
doesn't start from 0, it start from 1 when we listen on one line.
It is because 'i' is used from one more purpose, counting of lines
(num_lines) and it isn't restore to 0 after following code
for (i = 0; i < num_lines; i++)
gpiotools_set_bit(&values.mask, i);
Restore the initial value of the iterator to 0 in order to allow counting
of loops to work for any cases.
Fixes: 62757c32d5 ("tools: gpio: add multi-line monitoring to gpio-event-mon")
Signed-off-by: Ivo Borisov Shopov <ivoshopov@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[Bartosz: tweak the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This one was left behind by a previous cleanup patch:
drivers/gpio/gpio-ep93xx.c: In function 'ep93xx_gpio_add_bank':
drivers/gpio/gpio-ep93xx.c:366:34: error: unused variable 'ic' [-Werror=unused-variable]
Fixes: 216f37366e ("gpio: ep93xx: Make irqchip immutable")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
ifcvf_mgmt_dev leaks memory if it is not freed before
returning. Call is made to correct return statement
so memory does not leak. ifcvf_init_hw does not take
care of this so it is needed to do it here.
Signed-off-by: Tanmay Bhushan <007047221b@gmail.com>
Message-Id: <772e9fe133f21fa78fb98a2ebe8969efbbd58e3c.camel@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Zhu Lingshan <lingshan.zhu@intel.com>
Al Viro said:
"""
Since "vhost/scsi: fix reuse of &vq->iov[out] in response"
we have this:
cmd->tvc_resp_iov = vq->iov[vc.out];
cmd->tvc_in_iovs = vc.in;
combined with
iov_iter_init(&iov_iter, ITER_DEST, &cmd->tvc_resp_iov,
cmd->tvc_in_iovs, sizeof(v_rsp));
in vhost_scsi_complete_cmd_work(). We used to have ->tvc_resp_iov
_pointing_ to vq->iov[vc.out]; back then iov_iter_init() asked to
set an iovec-backed iov_iter over the tail of vq->iov[], with
length being the amount of iovecs in the tail.
Now we have a copy of one element of that array. Fortunately, the members
following it in the containing structure are two non-NULL kernel pointers,
so copy_to_iter() will not copy anything beyond the first iovec - kernel
pointer is not (on the majority of architectures) going to be accepted by
access_ok() in copyout() and it won't be skipped since the "length" (in
reality - another non-NULL kernel pointer) won't be zero.
So it's not going to give a guest-to-qemu escalation, but it's definitely
a bug. Frankly, my preference would be to verify that the very first iovec
is long enough to hold rsp_size. Due to the above, any users that try to
give us vq->iov[vc.out].iov_len < sizeof(struct virtio_scsi_cmd_resp)
would currently get a failure in vhost_scsi_complete_cmd_work()
anyway.
"""
However, the spec doesn't say anything about the legacy descriptor
layout for the respone. So this patch tries to not assume the response
to reside in a single separate descriptor which is what commit
79c14141a4 ("vhost/scsi: Convert completion path to use") tries to
achieve towards to ANY_LAYOUT.
This is done by allocating and using dedicate resp iov in the
command. To be safety, start with UIO_MAXIOV to be consistent with the
limitation that we advertise to the vhost_get_vq_desc().
Testing with the hacked virtio-scsi driver that use 1 descriptor for 1
byte in the response.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin Coddington <bcodding@redhat.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Fixes: a77ec83a57 ("vhost/scsi: fix reuse of &vq->iov[out] in response")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230119073647.76467-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Fix the build caused by missing kmsan_handle_dma() and is_power_of_2() that
are used in drivers/virtio/virtio_ring.c.
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Message-Id: <20230110034310.779744-1-mie@igel.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the vhost iotlb is used along with a guest virtual iommu
and the guest gets rebooted, some MISS messages may have been
recorded just before the reboot and spuriously executed by
the virtual iommu after the reboot.
As vhost does not have any explicit reset user API,
VHOST_NET_SET_BACKEND looks a reasonable point where to clear
the pending messages, in case the backend is removed.
Export vhost_clear_msg() and call it in vhost_net_set_backend()
when fd == -1.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Fixes: 6b1e6cc785 ("vhost: new device IOTLB API")
Message-Id: <20230117151518.44725-3-eric.auger@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We change recently the memalloc helper to use
dma_alloc_noncontiguous() and the fallback to get_pages(). Although
lots of issues with IOMMU (or non-IOMMU) have been addressed, but
there seems still a regression on Xen PV. Interestingly, the only
proper way to work is use dma_alloc_coherent(). The use of
dma_alloc_coherent() for SG buffer was dropped as it's problematic on
IOMMU systems. OTOH, Xen PV has a different way, and it's fine to use
the dma_alloc_coherent().
This patch is a workaround for Xen PV. It consists of the following
changes:
- For Xen PV, use only the fallback allocation without
dma_alloc_noncontiguous()
- In the fallback allocation, use dma_alloc_coherent();
the DMA address from dma_alloc_coherent() is returned in get_addr
ops
- The DMA addresses are stored in an array; the first entry stores the
number of allocated pages in lower bits, which are referred at
releasing pages again
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Fixes: a8d302a0b7 ("ALSA: memalloc: Revive x86-specific WC page allocations again")
Fixes: 9736a32513 ("ALSA: memalloc: Don't fall back for SG-buffer with IOMMU")
Link: https://lore.kernel.org/r/87tu256lqs.wl-tiwai@suse.de
Link: https://lore.kernel.org/r/20230125153104.5527-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The kernel crash was caused by a BPF program attached to the
"lsm_cgroup/socket_sock_rcv_skb" hook, which performed a call to
`bpf_setsockopt()` in order to set the TCP_NODELAY flag as an
example. Flags like TCP_NODELAY can prompt the kernel to flush a
socket's outgoing queue, and this hook
"lsm_cgroup/socket_sock_rcv_skb" is frequently triggered by
softirqs. The issue was that in certain circumstances, when
`tcp_write_xmit()` was called to flush the queue, it would also allow
BH (bottom-half) to run. This could lead to our program attempting to
flush the same socket recursively, which caused a `skbuff` to be
unlinked twice.
`security_sock_rcv_skb()` is triggered by `tcp_filter()`. This occurs
before the sock ownership is checked in `tcp_v4_rcv()`. Consequently,
if a bpf program runs on `security_sock_rcv_skb()` while under softirq
conditions, it may not possess the lock needed for `bpf_setsockopt()`,
thus presenting an issue.
The patch fixes this issue by ensuring that a BPF program attached to
the "lsm_cgroup/socket_sock_rcv_skb" hook is not allowed to call
`bpf_setsockopt()`.
The differences from v1 are
- changing commit log to explain holding the lock of the sock,
- emphasizing that TCP_NODELAY is not the only flag, and
- adding the fixes tag.
v1: https://lore.kernel.org/bpf/20230125000244.1109228-1-kuifeng@meta.com/
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Fixes: 9113d7e48e ("bpf: expose bpf_{g,s}etsockopt to lsm cgroup")
Link: https://lore.kernel.org/r/20230127001732.4162630-1-kuifeng@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This reverts commit 948e922fc4.
Not all targets that return PQ=1 and PDT=0 should be ignored. While
the SCSI spec is vague in this department, there appears to be a
critical mass of devices which rely on devices being accessible with
this combination of reported values.
Fixes: 948e922fc4 ("scsi: core: map PQ=1, PDT=other values to SCSI_SCAN_TARGET_PRESENT")
Link: https://lore.kernel.org/r/yq1lelrleqr.fsf@ca-mkp.ca.oracle.com
Acked-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Martin Wilck <mwilck@suse.com>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Although most calls of scsi_device_put() happen from non-atomic context,
alua_rtpg_queue() calls this function from atomic context if
alua_rtpg_queue() itself is called from atomic context. alua_rtpg_queue()
is always called from contexts where the caller must hold at least one
reference to the scsi device in question. This means that the reference
taken by alua_rtpg_queue() itself can't be the last one, and thus can be
dropped without entering the code path in which scsi_device_put() might
actually sleep. Hence move the might_sleep() annotation from
scsi_device_put() into scsi_device_dev_release().
[1] https://lore.kernel.org/linux-scsi/b49e37d5-edfb-4c56-3eeb-62c7d5855c00@linux.ibm.com/
[2] https://lore.kernel.org/linux-scsi/55c35e64-a7d4-9072-46fd-e8eae6a90e96@linux.ibm.com/
Note: a significant part of the above description was written by Martin
Wilck.
Fixes: f93ed747e2 ("scsi: core: Release SCSI devices synchronously")
Cc: Martin Wilck <mwilck@suse.com>
Cc: Steffen Maier <maier@linux.ibm.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sachin Sant <sachinp@linux.ibm.com>
Cc: Benjamin Block <bblock@linux.ibm.com>
Reported-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Link: https://lore.kernel.org/r/20230125194311.249553-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
after free fix for fbdev deferred io
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCY9JYbwAKCRDj7w1vZxhR
xT+PAQCA5ZOpDxVb4ZBKgggckxABiIJ6Ql480Oel7sJTlFudFwD+JfqDxMcOGe4F
cq+xix1NYNN5bLKVEQONXsM9NpAwzgA=
=bp8z
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2023-01-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A fix and a preliminary patch to fix a memory leak in i915, and a use
after free fix for fbdev deferred io
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126104018.cbrcjxl5wefdbb2f@houat
Commit 622113b9f1 ("drm/ssd130x: Replace simple display helpers with the
atomic helpers") changed the driver to just use the atomic helpers instead
of the simple KMS abstraction layer.
But the commit also made a subtle change on the display power sequence and
initialization order, by moving the ssd130x_power_on() call to the encoder
.atomic_enable handler and the ssd130x_init() call to CRTC .reset handler.
Before this change, both ssd130x_power_on() and ssd130x_init() were called
in the simple display pipeline .enable handler, so the display was already
initialized by the time the SSD130X_DISPLAY_ON command was sent.
For some reasons, it only made the ssd130x SPI driver to fail but the I2C
was still working. That is the reason why the bug was not noticed before.
To revert to the old driver behavior, move the ssd130x_init() call to the
encoder .atomic_enable as well. Besides fixing the panel not being turned
on when using SPI, it also gets rid of the custom CRTC .reset callback.
Fixes: 622113b9f1 ("drm/ssd130x: Replace simple display helpers with the atomic helpers")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125184230.3343206-1-javierm@redhat.com
Highlights:
- Fix false positive apple_gmux backlight detection on older
iGPU only MacBook models
- Various other small fixes and hardware-id additions
The following is an automated git shortlog grouped by driver:
ACPI:
- video: Fix apple gmux detection
apple-gmux:
- Add apple_gmux_detect() helper
- Move port defines to apple-gmux.h
asus-wmi:
- Fix kbd_dock_devid tablet-switch reporting
dell-wmi:
- Add a keymap for KEY_MUTE in type 0x0010 table
gigabyte-wmi:
- add support for B450M DS3H WIFI-CF
hp-wmi:
- Fix cast to smaller integer type warning
- Handle Omen Key event
platform/x86/amd:
- pmc: Add a module parameter to disable workarounds
- pmc: Disable IRQ1 wakeup for RN/CZN
thinkpad_acpi:
- Fix profile modes on Intel platforms
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmPShrkUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yo5wgAlfTc6R4vZrtg5W8O5y2ZghMLTNLM
TsT5uzoFdz76xB62fh4RUPn4WWLftvKvOxXVTITSZe4rj3TR1voQM1vZedV6IcDX
6rFwMKpZDnerP5N07S7QlmGcDMIaFtsQGIjND6ZzcdS6RJRSdE/CcfyEO3IGgUxq
C1AWHm8Rh0Iq9ZdudFT5i7PXiFjCJyEZvRJXXFb1ZhDFdpCsfV/1lDx1D05/Hbk8
Ovm9yL3QXwxTbsIPZ7tgyDX0Uw/F7uaROGyNoo7LCxrY9ow0hfDV4KWO02+Dwf6n
Sl5rTwZZiQ13RL2h/3za05qFLemZ2o16xH7zntIuMuLkOzFPHF8Y7Gle5A==
=ryVq
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Fix false positive apple_gmux backlight detection on older iGPU only
MacBook models
- Various other small fixes and hardware-id additions
* tag 'platform-drivers-x86-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Fix profile modes on Intel platforms
ACPI: video: Fix apple gmux detection
platform/x86: apple-gmux: Add apple_gmux_detect() helper
platform/x86: apple-gmux: Move port defines to apple-gmux.h
platform/x86: hp-wmi: Fix cast to smaller integer type warning
platform/x86/amd: pmc: Add a module parameter to disable workarounds
platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN
platform/x86: asus-wmi: Fix kbd_dock_devid tablet-switch reporting
platform/x86: gigabyte-wmi: add support for B450M DS3H WIFI-CF
platform/x86: hp-wmi: Handle Omen Key event
platform/x86: dell-wmi: Add a keymap for KEY_MUTE in type 0x0010 table
Current release - regressions:
- sched: sch_taprio: do not schedule in taprio_reset()
Previous releases - regressions:
- core: fix UaF in netns ops registration error path
- ipv4: prevent potential spectre v1 gadgets
- ipv6: fix reachability confirmation with proxy_ndp
- netfilter: fix for the set rbtree
- eth: fec: use page_pool_put_full_page when freeing rx buffers
- eth: iavf: fix temporary deadlock and failure to set MAC address
Previous releases - always broken:
- netlink: prevent potential spectre v1 gadgets
- netfilter: fixes for SCTP connection tracking
- mctp: struct sock lifetime fixes
- eth: ravb: fix possible hang if RIS2_QFF1 happen
- eth: tg3: resolve deadlock in tg3_reset_task() during EEH
Misc:
- Mat stepped out as MPTCP co-maintainer
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ay1Q
-----END PGP SIGNATURE-----
Merge tag 'net-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- sched: sch_taprio: do not schedule in taprio_reset()
Previous releases - regressions:
- core: fix UaF in netns ops registration error path
- ipv4: prevent potential spectre v1 gadgets
- ipv6: fix reachability confirmation with proxy_ndp
- netfilter: fix for the set rbtree
- eth: fec: use page_pool_put_full_page when freeing rx buffers
- eth: iavf: fix temporary deadlock and failure to set MAC address
Previous releases - always broken:
- netlink: prevent potential spectre v1 gadgets
- netfilter: fixes for SCTP connection tracking
- mctp: struct sock lifetime fixes
- eth: ravb: fix possible hang if RIS2_QFF1 happen
- eth: tg3: resolve deadlock in tg3_reset_task() during EEH
Misc:
- Mat stepped out as MPTCP co-maintainer"
* tag 'net-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
net: mdio-mux-meson-g12a: force internal PHY off on mux switch
docs: networking: Fix bridge documentation URL
tsnep: Fix TX queue stop/wake for multiple queues
net/tg3: resolve deadlock in tg3_reset_task() during EEH
net: mctp: mark socks as dead on unhash, prevent re-add
net: mctp: hold key reference when looking up a general key
net: mctp: move expiry timer delete to unhash
net: mctp: add an explicit reference from a mctp_sk_key to sock
net: ravb: Fix possible hang if RIS2_QFF1 happen
net: ravb: Fix lack of register setting after system resumed for Gen3
net/x25: Fix to not accept on connected socket
ice: move devlink port creation/deletion
sctp: fail if no bound addresses can be used for a given scope
net/sched: sch_taprio: do not schedule in taprio_reset()
Revert "Merge branch 'ethtool-mac-merge'"
netrom: Fix use-after-free of a listening socket.
netfilter: conntrack: unify established states for SCTP paths
Revert "netfilter: conntrack: add sctp DATA_SENT state"
netfilter: conntrack: fix bug in for_each_sctp_chunk
netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETE
...
I'm not exactly clear on what strange workflow causes people to do it,
but clearly occasionally some files end up being committed as executable
even though they clearly aren't.
This is a reprise of commit 90fda63fa1 ("treewide: fix up files
incorrectly marked executable"), just with a different set of files (but
with the same trivial shell scripting).
So apparently we need to re-do this every five years or so, and Joe
needs to just keep reminding me to do so ;)
Reported-by: Joe Perches <joe@perches.com>
Fixes: 523375c943 ("drm/vmwgfx: Port vmwgfx to arm64")
Fixes: 5c43993777 ("ASoC: codecs: add support for ES8326")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While looking through legacy platform data users, I noticed that
the DT probing never uses data from the DT properties, as the
platform_data structure gets overwritten directly after it
is initialized.
There have never been any boards defining the platform_data in
the mainline kernel either, so this driver so far only worked
with patched kernels or with the default values.
For the benefit of possible downstream users, fix the DT probe
by no longer overwriting the data.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230126162203.2986339-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The 'ublk_chr_class' is needed when deleting ublk char devices in
ublk_exit(), so move it after devices(idle) are removed.
Fixes the following warning reported by Harris, James R:
[ 859.178950] sysfs group 'power' not found for kobject 'ublkc0'
[ 859.178962] WARNING: CPU: 3 PID: 1109 at fs/sysfs/group.c:278 sysfs_remove_group+0x9c/0xb0
Reported-by: "Harris, James R" <james.r.harris@intel.com>
Fixes: 71f28f3136 ("ublk_drv: add io_uring based userspace block driver")
Link: https://lore.kernel.org/linux-block/Y9JlFmSgDl3+zy3N@T590/T/#t
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Jim Harris <james.r.harris@intel.com>
Link: https://lore.kernel.org/r/20230126115346.263344-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It turns out the optimisation implemented by commit 4f2c3872dd is
totally broken, since all the places that consume hw->dtcs_used for
events other than cycle count are still not expecting it to be sparsely
populated, and fail to read all the relevant DTC counters correctly if
so.
If implemented correctly, the optimisation potentially saves up to 3
register reads per event update, which is reasonably significant for
events targeting a single node, but still not worth a massive amount of
additional code complexity overall. Getting it right within the current
design looks a fair bit more involved than it was ever intended to be,
so let's just make a functional revert which restores the old behaviour
while still backporting easily.
Fixes: 4f2c3872dd ("perf/arm-cmn: Optimise DTC counter accesses")
Reported-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/b41bb4ed7283c3d8400ce5cf5e6ec94915e6750f.1674498637.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The bcm2711 has two HDMI outputs, each with their own CEC adapter.
The CEC adapter name has to be unique, but it is currently
hardcoded to "vc4" for both outputs. Change this to use the card_name
from the variant information in order to make the adapter name unique.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 15b4511a4a ("drm/vc4: add HDMI CEC support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/dcf1db75-d9cc-62cc-fa12-baf1b2b3bf31@xs4all.nl
Currently, when resetting the USB modem via AT commands, the modem is
no longer re-connected.
This problem is caused by the incorrect description of the USB_OTG2_OC
pad. It should have pull-up enabled, hysteresis enabled and the
property 'over-current-active-low' should be passed.
With this change, the USB modem can be successfully re-connected
after a reset.
Cc: stable@vger.kernel.org
Fixes: 9ac0ae97e3 ("ARM: dts: imx7d-smegw01: Add support for i.MX7D SMEGW01 board")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Currently if suspending using either freeze or memory state, the fec
driver tries to power down the phy which leads to crash of the kernel
and non-responsible kernel with the following call trace:
[ 24.839889 ] Call trace:
[ 24.839892 ] phy_error+0x18/0x60
[ 24.839898 ] kszphy_handle_interrupt+0x6c/0x80
[ 24.839903 ] phy_interrupt+0x20/0x2c
[ 24.839909 ] irq_thread_fn+0x30/0xa0
[ 24.839919 ] irq_thread+0x178/0x2c0
[ 24.839925 ] kthread+0x154/0x160
[ 24.839932 ] ret_from_fork+0x10/0x20
Since there is currently no functionality in the phy subsystem to power
down phys let's just disable the feature of powering-down the ethernet
phy.
Fixes: 6a57f224f7 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The majority of device trees in arch/arm64/boot/dts/freescale/ are
built around i.MX SoCs with the rest being for Layerscape. Yet, calling
get_maintainers.pl -f on this directory will not match the MAINTAINERS
entry, because the directory name doesn't contain the substring "imx".
Add an explicit file match for the directory and exclude the Layerscape
specific files. This ensures To/Cc is not only generated from git
history, but takes e.g. the R: entries into account as well.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Force the internal PHY off then on when switching to the internal path.
This fixes problems where the PHY ID is not properly set.
Fixes: 7090425104 ("net: phy: add amlogic g12a mdio mux support")
Suggested-by: Qi Duan <qi.duan@amlogic.com>
Co-developed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20230124101157.232234-1-jbrunet@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netif_stop_queue() and netif_wake_queue() act on TX queue 0. This is ok
as long as only a single TX queue is supported. But support for multiple
TX queues was introduced with 762031375d and I missed to adapt stop
and wake of TX queues.
Use netif_stop_subqueue() and netif_tx_wake_queue() to act on specific
TX queue.
Fixes: 762031375d ("tsnep: Support multiple TX/RX queue pairs")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://lore.kernel.org/r/20230124191440.56887-1-gerhard@engleder-embedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During EEH error injection testing, a deadlock was encountered in the tg3
driver when tg3_io_error_detected() was attempting to cancel outstanding
reset tasks:
crash> foreach UN bt
...
PID: 159 TASK: c0000000067c6000 CPU: 8 COMMAND: "eehd"
...
#5 [c00000000681f990] __cancel_work_timer at c00000000019fd18
#6 [c00000000681fa30] tg3_io_error_detected at c00800000295f098 [tg3]
#7 [c00000000681faf0] eeh_report_error at c00000000004e25c
...
PID: 290 TASK: c000000036e5f800 CPU: 6 COMMAND: "kworker/6:1"
...
#4 [c00000003721fbc0] rtnl_lock at c000000000c940d8
#5 [c00000003721fbe0] tg3_reset_task at c008000002969358 [tg3]
#6 [c00000003721fc60] process_one_work at c00000000019e5c4
...
PID: 296 TASK: c000000037a65800 CPU: 21 COMMAND: "kworker/21:1"
...
#4 [c000000037247bc0] rtnl_lock at c000000000c940d8
#5 [c000000037247be0] tg3_reset_task at c008000002969358 [tg3]
#6 [c000000037247c60] process_one_work at c00000000019e5c4
...
PID: 655 TASK: c000000036f49000 CPU: 16 COMMAND: "kworker/16:2"
...:1
#4 [c0000000373ebbc0] rtnl_lock at c000000000c940d8
#5 [c0000000373ebbe0] tg3_reset_task at c008000002969358 [tg3]
#6 [c0000000373ebc60] process_one_work at c00000000019e5c4
...
Code inspection shows that both tg3_io_error_detected() and
tg3_reset_task() attempt to acquire the RTNL lock at the beginning of
their code blocks. If tg3_reset_task() should happen to execute between
the times when tg3_io_error_deteced() acquires the RTNL lock and
tg3_reset_task_cancel() is called, a deadlock will occur.
Moving tg3_reset_task_cancel() call earlier within the code block, prior
to acquiring RTNL, prevents this from happening, but also exposes another
deadlock issue where tg3_reset_task() may execute AFTER
tg3_io_error_detected() has executed:
crash> foreach UN bt
PID: 159 TASK: c0000000067d2000 CPU: 9 COMMAND: "eehd"
...
#4 [c000000006867a60] rtnl_lock at c000000000c940d8
#5 [c000000006867a80] tg3_io_slot_reset at c0080000026c2ea8 [tg3]
#6 [c000000006867b00] eeh_report_reset at c00000000004de88
...
PID: 363 TASK: c000000037564000 CPU: 6 COMMAND: "kworker/6:1"
...
#3 [c000000036c1bb70] msleep at c000000000259e6c
#4 [c000000036c1bba0] napi_disable at c000000000c6b848
#5 [c000000036c1bbe0] tg3_reset_task at c0080000026d942c [tg3]
#6 [c000000036c1bc60] process_one_work at c00000000019e5c4
...
This issue can be avoided by aborting tg3_reset_task() if EEH error
recovery is already in progress.
Fixes: db84bf43ef ("tg3: tg3_reset_task() needs to use rtnl_lock to synchronize")
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230124185339.225806-1-drc@linux.vnet.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When user switch samba to ksmbd, The following message flood is coming
when accessing files. Samba seems to changs dos attribute version to v5.
This patch downgrade ndr version error message to debug.
$ dmesg
...
[68971.766914] ksmbd: v5 version is not supported
[68971.779808] ksmbd: v5 version is not supported
[68971.871544] ksmbd: v5 version is not supported
[68971.910135] ksmbd: v5 version is not supported
...
Cc: stable@vger.kernel.org
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stream protocol length will never be larger than 16KB until session setup.
After session setup, the size of requests will not be larger than
16KB + SMB2 MAX WRITE size. This patch limits these invalidly oversized
requests and closes the connection immediately.
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-18259
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The cxl_pmem.ko module houses the driver for both cxl_nvdimm_bridge
objects and cxl_nvdimm objects. When the core creates a cxl_nvdimm it
arranges for it to be autoremoved when the bridge goes down. However, if
the bridge never initialized because the cxl_pmem.ko module never
loaded, it sets up a the following crash scenario:
BUG: kernel NULL pointer dereference, address: 0000000000000478
[..]
RIP: 0010:cxl_nvdimm_probe+0x99/0x140 [cxl_pmem]
[..]
Call Trace:
<TASK>
cxl_bus_probe+0x17/0x50 [cxl_core]
really_probe+0xde/0x380
__driver_probe_device+0x78/0x170
driver_probe_device+0x1f/0x90
__driver_attach+0xd2/0x1c0
bus_for_each_dev+0x79/0xc0
bus_add_driver+0x1b1/0x200
driver_register+0x89/0xe0
cxl_pmem_init+0x50/0xff0 [cxl_pmem]
It turns out the recent rework to simplify nvdimm probing obviated the
need to unregister cxl_nvdimm objects at cxl_nvdimm_bridge ->remove()
time. Leave the cxl_nvdimm device registered until the hosting
cxl_memdev departs. The alternative is that the cxl_memdev needs to be
reattached whenever the cxl_nvdimm_bridge attach state cycles, which is
awkward and unnecessary.
The only requirement is to make sure that when the cxl_nvdimm_bridge
goes away any dependent cxl_nvdimm objects are shutdown. Handle that in
unregister_nvdimm_bus().
With these registration entanglements removed there is no longer a need
to pre-load the cxl_pmem module in cxl_acpi.
Fixes: cb9cfff82f ("cxl/acpi: Simplify cxl_nvdimm_bridge probing")
Reported-by: Gregory Price <gregory.price@memverge.com>
Debugged-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/167426077263.3955046.9695309346988027311.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
struct bkey has internal padding in a union, but it isn't always named
the same (e.g. key ## _pad, key_p, etc). This makes it extremely hard
for the compiler to reason about the available size of copies done
against such keys. Use unsafe_memcpy() for now, to silence the many
run-time false positive warnings:
memcpy: detected field-spanning write (size 264) of single field "&i->j" at drivers/md/bcache/journal.c:152 (size 240)
memcpy: detected field-spanning write (size 24) of single field "&b->key" at drivers/md/bcache/btree.c:939 (size 16)
memcpy: detected field-spanning write (size 24) of single field "&temp.key" at drivers/md/bcache/extents.c:428 (size 16)
Reported-by: Alexandre Pereira <alexpereira@disroot.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216785
Acked-by: Coly Li <colyli@suse.de>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: linux-bcache@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230106060229.never.047-kees@kernel.org
Since the long memcpy tests may stall a system for tens of seconds
in virtualized architecture environments, split those tests off under
CONFIG_MEMCPY_SLOW_KUNIT_TEST so they can be separately disabled.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/lkml/20221226195206.GA2626419@roeck-us.net
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: David Gow <davidgow@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
[Why&How]
Switching between certain modes that are freesync video modes and those
are not freesync video modes result in timing not changing as seen by
the monitor due to incorrect timing being driven.
The issue is fixed by ensuring that when a non freesync video mode is
set, we reset the freesync status on the crtc.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
We still need to refer to port while removing payload at commit_tail.
we should keep the kref till then to release.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2171
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 4d07b0bc40 ("drm/display/dp_mst: Move all payload info into the atomic state")
Cc: stable@vger.kernel.org # 6.1
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Tested-by: Didier Raboud <odyx@debian.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Now the vc_start_slot is controlled at drm side. When we
service a long HPD, we still need to run
dm_helpers_dp_mst_write_payload_allocation_table() to update
drm mst_mgr's relevant variable. Otherwise, on the next plug-in,
payload will get assigned with a wrong start slot.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2171
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 4d07b0bc40 ("drm/display/dp_mst: Move all payload info into the atomic state")
Cc: stable@vger.kernel.org # 6.1
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Tested-by: Didier Raboud <odyx@debian.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
amdgpu expects to update payload table for one stream one time
by calling dm_helpers_dp_mst_write_payload_allocation_table().
Currently, it get modified to try to update HW payload table
at once by referring mst_state.
[How]
This is just a quick workaround. Should find way to remove the
temporary struct dc_dp_mst_stream_allocation_table later if set
struct link_mst_stream_allocatio directly is possible.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2171
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 4d07b0bc40 ("drm/display/dp_mst: Move all payload info into the atomic state")
Cc: stable@vger.kernel.org # 6.1
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Tested-by: Didier Raboud <odyx@debian.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looks like I made a pretty big mistake here without noticing: it seems when
I moved the assignments of mst_state->pbn_div I completely missed the fact
that the reason for us calling drm_dp_mst_update_slots() earlier was to
account for the fact that we need to call this function using info from the
root MST connector, instead of just trying to do this from each MST
encoder's atomic check function. Otherwise, we end up filling out all of
DC's link information with zeroes.
So, let's restore that and hopefully fix this DSC regression.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2171
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 4d07b0bc40 ("drm/display/dp_mst: Move all payload info into the atomic state")
Cc: stable@vger.kernel.org # 6.1
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Didier Raboud <odyx@debian.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To support new mes ip block
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GC 11.0.4 needs load IMU to power up GFX before loads GFX firmware.
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
