Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions.
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now, with no reported
issues other than a merge conflict with your tree that should be trivial
to handle (take both sides).
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaTTNDQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykVIACeN0AiTosAtp4CAGe4fAwM7EvbnkQAoNJE5NAx
Ef31/j1Tq2pCTWt6SVbs
=AY/e
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on
them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now"
* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...
Some device tree cleanups and a maintainer add.
Fix a race when handling channel updates that could result in errors
being reported to the user in some cases.
-----BEGIN PGP SIGNATURE-----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=RpBy
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.19-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"Minor IPMI fixes:
- Some device tree cleanups and a maintainer add
- Fix a race when handling channel updates that could result in
errors being reported to the user in some cases"
* tag 'for-linus-6.19-1' of https://github.com/cminyard/linux-ipmi:
MAINTAINERS: Add entry on Loongson-2K IPMI driver
dt-bindings: ipmi: Convert aspeed,ast2400-ibt-bmc to DT schema
dt-bindings: ipmi: Convert nuvoton,npcm750-kcs-bmc to DT schema
ipmi: Skip channel scan if channels are already marked ready
ipmi: Fix __scan_channels() failing to rescan channels
ipmi: Fix the race between __scan_channels() and deliver_response()
This second pull request for 6.19 is targeted for tpm2-sessions updates.
There's two bug fixes and two more cosmetic tweaks for HMAC protected
sessions. They provide a baseine for further improvements to be
implemented during the the course of the release cycle.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaTJydQAKCRAaerohdGur
0lD9AP9vg5qIchVhfDDNJ3uwzCjwEa9FpFpsozQ5nBgwnynW9gD/XN1GckMcafLP
AlvM+hQHMMj2ZAp3Ki0vBKK8NGMj2gU=
=rhdt
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-sessions-next-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull more tpm updates from Jarkko Sakkinen:
"This is targeted for tpm2-sessions updates.
There's two bug fixes and two more cosmetic tweaks for HMAC protected
sessions. They provide a baseine for further improvements to be
implemented during the the course of the release cycle"
* tag 'tpmdd-sessions-next-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm2-sessions: Open code tpm_buf_append_hmac_session()
tpm2-sessions: Remove 'attributes' parameter from tpm_buf_append_auth
tpm2-sessions: Fix tpm2_read_public range checks
tpm2-sessions: Fix out of range indexing in name_size
- The 10 patch series "__vmalloc()/kvmalloc() and no-block support" from
Uladzislau Rezki reworks the vmalloc() code to support non-blocking
allocations (GFP_ATOIC, GFP_NOWAIT).
- The 2 patch series "ksm: fix exec/fork inheritance" from xu xin fixes
a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not inherited
across fork/exec.
- The 4 patch series "mm/zswap: misc cleanup of code and documentations"
from SeongJae Park does some light maintenance work on the zswap code.
- The 5 patch series "mm/page_owner: add debugfs files 'show_handles'
and 'show_stacks_handles'" from Mauricio Faria de Oliveira enhances the
/sys/kernel/debug/page_owner debug feature. It adds unique identifiers
to differentiate the various stack traces so that userspace monitoring
tools can better match stack traces over time.
- The 2 patch series "mm/page_alloc: pcp->batch cleanups" from Joshua
Hahn makes some minor alterations to the page allocator's per-cpu-pages
feature.
- The 2 patch series "Improve UFFDIO_MOVE scalability by removing
anon_vma lock" from Lokesh Gidra addresses a scalability issue in
userfaultfd's UFFDIO_MOVE operation.
- The 2 patch series "kasan: cleanups for kasan_enabled() checks" from
Sabyrzhan Tasbolatov performs some cleanup in the KASAN code.
- The 2 patch series "drivers/base/node: fold node register and
unregister functions" from Donet Tom cleans up the NUMA node handling
code a little.
- The 4 patch series "mm: some optimizations for prot numa" from Kefeng
Wang provides some cleanups and small optimizations to the NUMA
allocation hinting code.
- The 5 patch series "mm/page_alloc: Batch callers of
free_pcppages_bulk" from Joshua Hahn addresses long lock hold times at
boot on large machines. These were causing (harmless) softlockup
warnings.
- The 2 patch series "optimize the logic for handling dirty file folios
during reclaim" from Baolin Wang removes some now-unnecessary work from
page reclaim.
- The 10 patch series "mm/damon: allow DAMOS auto-tuned for per-memcg
per-node memory usage" from SeongJae Park enhances the DAMOS auto-tuning
feature.
- The 2 patch series "mm/damon: fixes for address alignment issues in
DAMON_LRU_SORT and DAMON_RECLAIM" from Quanmin Yan fixes DAMON_LRU_SORT
and DAMON_RECLAIM with certain userspace configuration.
- The 15 patch series "expand mmap_prepare functionality, port more
users" from Lorenzo Stoakes enhances the new(ish)
file_operations.mmap_prepare() method and ports additional callsites
from the old ->mmap() over to ->mmap_prepare().
- The 8 patch series "Fix stale IOTLB entries for kernel address space"
from Lu Baolu fixes a bug (and possible security issue on non-x86) in
the IOMMU code. In some situations the IOMMU could be left hanging onto
a stale kernel pagetable entry.
- The 4 patch series "mm/huge_memory: cleanup __split_unmapped_folio()"
from Wei Yang cleans up and optimizes the folio splitting code.
- The 5 patch series "mm, swap: misc cleanup and bugfix" from Kairui
Song implements some cleanups and a minor fix in the swap discard code.
- The 8 patch series "mm/damon: misc documentation fixups" from SeongJae
Park does as advertised.
- The 9 patch series "mm/damon: support pin-point targets removal" from
SeongJae Park permits userspace to remove a specific monitoring target
in the middle of the current targets list.
- The 2 patch series "mm: MISC follow-up patches for linux/pgalloc.h"
from Harry Yoo implements a couple of cleanups related to mm header file
inclusion.
- The 2 patch series "mm/swapfile.c: select swap devices of default
priority round robin" from Baoquan He improves the selection of swap
devices for NUMA machines.
- The 3 patch series "mm: Convert memory block states (MEM_*) macros to
enums" from Israel Batista changes the memory block labels from macros
to enums so they will appear in kernel debug info.
- The 3 patch series "ksm: perform a range-walk to jump over holes in
break_ksm" from Pedro Demarchi Gomes addresses an inefficiency when KSM
unmerges an address range.
- The 22 patch series "mm/damon/tests: fix memory bugs in kunit tests"
from SeongJae Park fixes leaks and unhandled malloc() failures in DAMON
userspace unit tests.
- The 2 patch series "some cleanups for pageout()" from Baolin Wang
cleans up a couple of minor things in the page scanner's
writeback-for-eviction code.
- The 2 patch series "mm/hugetlb: refactor sysfs/sysctl interfaces" from
Hui Zhu moves hugetlb's sysfs/sysctl handling code into a new file.
- The 9 patch series "introduce VM_MAYBE_GUARD and make it sticky" from
Lorenzo Stoakes makes the VMA guard regions available in /proc/pid/smaps
and improves the mergeability of guarded VMAs.
- The 2 patch series "mm: perform guard region install/remove under VMA
lock" from Lorenzo Stoakes reduces mmap lock contention for callers
performing VMA guard region operations.
- The 2 patch series "vma_start_write_killable" from Matthew Wilcox
starts work in permitting applications to be killed when they are
waiting on a read_lock on the VMA lock.
- The 11 patch series "mm/damon/tests: add more tests for online
parameters commit" from SeongJae Park adds additional userspace testing
of DAMON's "commit" feature.
- The 9 patch series "mm/damon: misc cleanups" from SeongJae Park does
that.
- The 2 patch series "make VM_SOFTDIRTY a sticky VMA flag" from Lorenzo
Stoakes addresses the possible loss of a VMA's VM_SOFTDIRTY flag when
that VMA is merged with another.
- The 16 patch series "mm: support device-private THP" from Balbir Singh
introduces support for Transparent Huge Page (THP) migration in zone
device-private memory.
- The 3 patch series "Optimize folio split in memory failure" from Zi
Yan optimizes folio split operations in the memory failure code.
- The 2 patch series "mm/huge_memory: Define split_type and consolidate
split support checks" from Wei Yang provides some more cleanups in the
folio splitting code.
- The 16 patch series "mm: remove is_swap_[pte, pmd]() + non-swap
entries, introduce leaf entries" from Lorenzo Stoakes cleans up our
handling of pagetable leaf entries by introducing the concept of
'software leaf entries', of type softleaf_t.
- The 4 patch series "reparent the THP split queue" from Muchun Song
reparents the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory resources.
- The 3 patch series "unify PMD scan results and remove redundant
cleanup" from Wei Yang does a little cleanup in the hugepage collapse
code.
- The 6 patch series "zram: introduce writeback bio batching" from
Sergey Senozhatsky improves zram writeback efficiency by introducing
batched bio writeback support.
- The 4 patch series "memcg: cleanup the memcg stats interfaces" from
Shakeel Butt cleans up our handling of the interrupt safety of some
memcg stats.
- The 4 patch series "make vmalloc gfp flags usage more apparent" from
Vishal Moola cleans up vmalloc's handling of incoming GFP flags.
- The 6 patch series "mm: Add soft-dirty and uffd-wp support for RISC-V"
from Chunyan Zhang teches soft dirty and userfaultfd write protect
tracking to use RISC-V's Svrsw60t59b extension.
- The 5 patch series "mm: swap: small fixes and comment cleanups" from
Youngjun Park fixes a small bug and cleans up some of the swap code.
- The 4 patch series "initial work on making VMA flags a bitmap" from
Lorenzo Stoakes starts work on converting the vma struct's flags to a
bitmap, so we stop running out of them, especially on 32-bit.
- The 2 patch series "mm/swapfile: fix and cleanup swap list iterations"
from Youngjun Park addresses a possible bug in the swap discard code and
cleans things up a little.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaTEb0wAKCRDdBJ7gKXxA
jjfIAP94W4EkCCwNOupnChoG+YWw/JW21anXt5NN+i5svn1yugEAwzvv6A+cAFng
o+ug/fyrfPZG7PLp2R8WFyGIP0YoBA4=
=IUzS
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups and small optimizations to the NUMA allocation hinting
code
"mm/page_alloc: Batch callers of free_pcppages_bulk" (Joshua Hahn)
Address long lock hold times at boot on large machines. These were
causing (harmless) softlockup warnings
"optimize the logic for handling dirty file folios during reclaim" (Baolin Wang)
Remove some now-unnecessary work from page reclaim
"mm/damon: allow DAMOS auto-tuned for per-memcg per-node memory usage" (SeongJae Park)
Enhance the DAMOS auto-tuning feature
"mm/damon: fixes for address alignment issues in DAMON_LRU_SORT and DAMON_RECLAIM" (Quanmin Yan)
Fix DAMON_LRU_SORT and DAMON_RECLAIM with certain userspace
configuration
"expand mmap_prepare functionality, port more users" (Lorenzo Stoakes)
Enhance the new(ish) file_operations.mmap_prepare() method and port
additional callsites from the old ->mmap() over to ->mmap_prepare()
"Fix stale IOTLB entries for kernel address space" (Lu Baolu)
Fix a bug (and possible security issue on non-x86) in the IOMMU
code. In some situations the IOMMU could be left hanging onto a
stale kernel pagetable entry
"mm/huge_memory: cleanup __split_unmapped_folio()" (Wei Yang)
Clean up and optimize the folio splitting code
"mm, swap: misc cleanup and bugfix" (Kairui Song)
Some cleanups and a minor fix in the swap discard code
"mm/damon: misc documentation fixups" (SeongJae Park)
"mm/damon: support pin-point targets removal" (SeongJae Park)
Permit userspace to remove a specific monitoring target in the
middle of the current targets list
"mm: MISC follow-up patches for linux/pgalloc.h" (Harry Yoo)
A couple of cleanups related to mm header file inclusion
"mm/swapfile.c: select swap devices of default priority round robin" (Baoquan He)
improve the selection of swap devices for NUMA machines
"mm: Convert memory block states (MEM_*) macros to enums" (Israel Batista)
Change the memory block labels from macros to enums so they will
appear in kernel debug info
"ksm: perform a range-walk to jump over holes in break_ksm" (Pedro Demarchi Gomes)
Address an inefficiency when KSM unmerges an address range
"mm/damon/tests: fix memory bugs in kunit tests" (SeongJae Park)
Fix leaks and unhandled malloc() failures in DAMON userspace unit
tests
"some cleanups for pageout()" (Baolin Wang)
Clean up a couple of minor things in the page scanner's
writeback-for-eviction code
"mm/hugetlb: refactor sysfs/sysctl interfaces" (Hui Zhu)
Move hugetlb's sysfs/sysctl handling code into a new file
"introduce VM_MAYBE_GUARD and make it sticky" (Lorenzo Stoakes)
Make the VMA guard regions available in /proc/pid/smaps and
improves the mergeability of guarded VMAs
"mm: perform guard region install/remove under VMA lock" (Lorenzo Stoakes)
Reduce mmap lock contention for callers performing VMA guard region
operations
"vma_start_write_killable" (Matthew Wilcox)
Start work on permitting applications to be killed when they are
waiting on a read_lock on the VMA lock
"mm/damon/tests: add more tests for online parameters commit" (SeongJae Park)
Add additional userspace testing of DAMON's "commit" feature
"mm/damon: misc cleanups" (SeongJae Park)
"make VM_SOFTDIRTY a sticky VMA flag" (Lorenzo Stoakes)
Address the possible loss of a VMA's VM_SOFTDIRTY flag when that
VMA is merged with another
"mm: support device-private THP" (Balbir Singh)
Introduce support for Transparent Huge Page (THP) migration in zone
device-private memory
"Optimize folio split in memory failure" (Zi Yan)
"mm/huge_memory: Define split_type and consolidate split support checks" (Wei Yang)
Some more cleanups in the folio splitting code
"mm: remove is_swap_[pte, pmd]() + non-swap entries, introduce leaf entries" (Lorenzo Stoakes)
Clean up our handling of pagetable leaf entries by introducing the
concept of 'software leaf entries', of type softleaf_t
"reparent the THP split queue" (Muchun Song)
Reparent the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory
resources
"unify PMD scan results and remove redundant cleanup" (Wei Yang)
A little cleanup in the hugepage collapse code
"zram: introduce writeback bio batching" (Sergey Senozhatsky)
Improve zram writeback efficiency by introducing batched bio
writeback support
"memcg: cleanup the memcg stats interfaces" (Shakeel Butt)
Clean up our handling of the interrupt safety of some memcg stats
"make vmalloc gfp flags usage more apparent" (Vishal Moola)
Clean up vmalloc's handling of incoming GFP flags
"mm: Add soft-dirty and uffd-wp support for RISC-V" (Chunyan Zhang)
Teach soft dirty and userfaultfd write protect tracking to use
RISC-V's Svrsw60t59b extension
"mm: swap: small fixes and comment cleanups" (Youngjun Park)
Fix a small bug and clean up some of the swap code
"initial work on making VMA flags a bitmap" (Lorenzo Stoakes)
Start work on converting the vma struct's flags to a bitmap, so we
stop running out of them, especially on 32-bit
"mm/swapfile: fix and cleanup swap list iterations" (Youngjun Park)
Address a possible bug in the swap discard code and clean things
up a little
[ This merge also reverts commit ebb9aeb980 ("vfio/nvgrace-gpu:
register device memory for poison handling") because it looks
broken to me, I've asked for clarification - Linus ]
* tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm: fix vma_start_write_killable() signal handling
mm/swapfile: use plist_for_each_entry in __folio_throttle_swaprate
mm/swapfile: fix list iteration when next node is removed during discard
fs/proc/task_mmu.c: fix make_uffd_wp_huge_pte() huge pte handling
mm/kfence: add reboot notifier to disable KFENCE on shutdown
memcg: remove inc/dec_lruvec_kmem_state helpers
selftests/mm/uffd: initialize char variable to Null
mm: fix DEBUG_RODATA_TEST indentation in Kconfig
mm: introduce VMA flags bitmap type
tools/testing/vma: eliminate dependency on vma->__vm_flags
mm: simplify and rename mm flags function for clarity
mm: declare VMA flags by bit
zram: fix a spelling mistake
mm/page_alloc: optimize lowmem_reserve max lookup using its semantic monotonicity
mm/vmscan: skip increasing kswapd_failures when reclaim was boosted
pagemap: update BUDDY flag documentation
mm: swap: remove scan_swap_map_slots() references from comments
mm: swap: change swap_alloc_slow() to void
mm, swap: remove redundant comment for read_swap_cache_async
mm, swap: use SWP_SOLIDSTATE to determine if swap is rotational
...
Open code 'tpm_buf_append_hmac_session_opt' to the call site, as it only
masks a call sequence and does otherwise nothing particularly useful.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Remove 'attributes' parameter from 'tpm_buf_append_auth', as it is not used
by the function.
Fixes: 27184f8905 ("tpm: Opt-in in disable PCR integrity protection")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
tpm2_read_public() has some rudimentary range checks but the function does
not ensure that the response buffer has enough bytes for the full TPMT_HA
payload.
Re-implement the function with necessary checks and validation, and return
name and name size for all handle types back to the caller.
Cc: stable@vger.kernel.org # v6.10+
Fixes: d0a25bb961 ("tpm: Add HMAC session name/handle append")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
'name_size' does not have any range checks, and it just directly indexes
with TPM_ALG_ID, which could lead into memory corruption at worst.
Address the issue by only processing known values and returning -EINVAL for
unrecognized values.
Make also 'tpm_buf_append_name' and 'tpm_buf_fill_hmac_session' fallible so
that errors are detected before causing any spurious TPM traffic.
End also the authorization session on failure in both of the functions, as
the session state would be then by definition corrupted.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 1085b8276b ("tpm: Add the rest of the session HMAC API")
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
This pull request for TPM driver contains changes to unify TPM return
code translation between trusted_tpm2 and TPM driver itself. Other than
that the changes are either bug fixes or minor imrovements.
Change log that should explain the previous iterations:
1. "Documentation: tpm-security.rst: change title to section"
https://lore.kernel.org/all/86514a6ab364e01f163470a91cacef120e1b8b47.camel@HansenPartnership.com/
2. "drivers/char/tpm: use min() instead of min_t()"
https://lore.kernel.org/all/20251201161228.3c09d88a@pumpkin/
3. Removed spurious kfree(): https://lore.kernel.org/linux-integrity/aS+K5nO2MP7N+kxQ@ly-workstation/
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaTComgAKCRAaerohdGur
0t38AQDThfcJhDmgfR3zYo0C8rtNQwM06fnooqsiDjTRHYXu6QEArRKJfR9B/vpN
vIAloxIgIUxQbewBJ1DfxJ7OVO2kGwA=
=hMwZ
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-6.19-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"This contains changes to unify TPM return code translation between
trusted_tpm2 and TPM driver itself. Other than that the changes are
either bug fixes or minor imrovements"
* tag 'tpmdd-next-6.19-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
KEYS: trusted: Use tpm_ret_to_err() in trusted_tpm2
tpm: Use -EPERM as fallback error code in tpm_ret_to_err
tpm: Cap the number of PCR banks
tpm: Remove tpm_find_get_ops
tpm: add WQ_PERCPU to alloc_workqueue users
tpm_crb: add missing loc parameter to kerneldoc
tpm_crb: Fix a spelling mistake
selftests: tpm2: Fix ill defined assertions
tpm2_get_pcr_allocation() does not cap any upper limit for the number of
banks. Cap the limit to eight banks so that out of bounds values coming
from external I/O cause on only limited harm.
Cc: stable@vger.kernel.org # v5.10+
Fixes: bcfff8384f ("tpm: dynamically allocate the allocated_banks array")
Tested-by: Lai Yi <yi1.lai@linux.intel.com>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
tpm_find_get_ops() looks for the first valid TPM if the caller passes in
NULL. All internal users have been converted to either associate
themselves with a TPM directly, or call tpm_default_chip() as part of
their setup. Remove the no longer necessary tpm_find_get_ops().
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Update the kerneldoc parameter definitions for __crb_go_idle
and __crb_cmd_ready to include the loc parameter.
Signed-off-by: Stuart Yoder <stuart.yoder@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The spelling of the word "requrest" is incorrect; it should be "request".
Signed-off-by: Chu Guangqing <chuguangqing@inspur.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
-----BEGIN PGP SIGNATURE-----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=FnfO
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Allow creaing nbcon console drivers with an unsafe write_atomic()
callback that can only be called by the final nbcon_atomic_flush_unsafe().
Otherwise, the driver would rely on the kthread.
It is going to be used as the-best-effort approach for an
experimental nbcon netconsole driver, see
https://lore.kernel.org/r/20251121-nbcon-v1-2-503d17b2b4af@debian.org
Note that a safe .write_atomic() callback is supposed to work in NMI
context. But some networking drivers are not safe even in IRQ
context:
https://lore.kernel.org/r/oc46gdpmmlly5o44obvmoatfqo5bhpgv7pabpvb6sjuqioymcg@gjsma3ghoz35
In an ideal world, all networking drivers would be fixed first and
the atomic flush would be blocked only in NMI context. But it brings
the question how reliable networking drivers are when the system is
in a bad state. They might block flushing more reliable serial
consoles which are more suitable for serious debugging anyway.
- Allow to use the last 4 bytes of the printk ring buffer.
- Prevent queuing IRQ work and block printk kthreads when consoles are
suspended. Otherwise, they create non-necessary churn or even block
the suspend.
- Release console_lock() between each record in the kthread used for
legacy consoles on RT. It might significantly speed up the boot.
- Release nbcon context between each record in the atomic flush. It
prevents stalls of the related printk kthread after it has lost the
ownership in the middle of a record
- Add support for NBCON consoles into KDB
- Add %ptsP modifier for printing struct timespec64 and use it where
possible
- Misc code clean up
* tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (48 commits)
printk: Use console_is_usable on console_unblank
arch: um: kmsg_dump: Use console_is_usable
drivers: serial: kgdboc: Drop checks for CON_ENABLED and CON_BOOT
lib/vsprintf: Unify FORMAT_STATE_NUM handlers
printk: Avoid irq_work for printk_deferred() on suspend
printk: Avoid scheduling irq_work on suspend
printk: Allow printk_trigger_flush() to flush all types
tracing: Switch to use %ptSp
scsi: snic: Switch to use %ptSp
scsi: fnic: Switch to use %ptSp
s390/dasd: Switch to use %ptSp
ptp: ocp: Switch to use %ptSp
pps: Switch to use %ptSp
PCI: epf-test: Switch to use %ptSp
net: dsa: sja1105: Switch to use %ptSp
mmc: mmc_test: Switch to use %ptSp
media: av7110: Switch to use %ptSp
ipmi: Switch to use %ptSp
igb: Switch to use %ptSp
e1000e: Switch to use %ptSp
...
API:
- Rewrite memcpy_sglist from scratch.
- Add on-stack AEAD request allocation.
- Fix partial block processing in ahash.
Algorithms:
- Remove ansi_cprng.
- Remove tcrypt tests for poly1305.
- Fix EINPROGRESS processing in authenc.
- Fix double-free in zstd.
Drivers:
- Use drbg ctr helper when reseeding xilinx-trng.
- Add support for PCI device 0x115A to ccp.
- Add support of paes in caam.
- Add support for aes-xts in dthev2.
Others:
- Use likely in rhashtable lookup.
- Fix lockdep false-positive in padata by removing a helper.
-----BEGIN PGP SIGNATURE-----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=DHes
-----END PGP SIGNATURE-----
Merge tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Rewrite memcpy_sglist from scratch
- Add on-stack AEAD request allocation
- Fix partial block processing in ahash
Algorithms:
- Remove ansi_cprng
- Remove tcrypt tests for poly1305
- Fix EINPROGRESS processing in authenc
- Fix double-free in zstd
Drivers:
- Use drbg ctr helper when reseeding xilinx-trng
- Add support for PCI device 0x115A to ccp
- Add support of paes in caam
- Add support for aes-xts in dthev2
Others:
- Use likely in rhashtable lookup
- Fix lockdep false-positive in padata by removing a helper"
* tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
crypto: zstd - fix double-free in per-CPU stream cleanup
crypto: ahash - Zero positive err value in ahash_update_finish
crypto: ahash - Fix crypto_ahash_import with partial block data
crypto: lib/mpi - use min() instead of min_t()
crypto: ccp - use min() instead of min_t()
hwrng: core - use min3() instead of nested min_t()
crypto: aesni - ctr_crypt() use min() instead of min_t()
crypto: drbg - Delete unused ctx from struct sdesc
crypto: testmgr - Add missing DES weak and semi-weak key tests
Revert "crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist"
crypto: scatterwalk - Fix memcpy_sglist() to always succeed
crypto: iaa - Request to add Kanchana P Sridhar to Maintainers.
crypto: tcrypt - Remove unused poly1305 support
crypto: ansi_cprng - Remove unused ansi_cprng algorithm
crypto: asymmetric_keys - fix uninitialized pointers with free attribute
KEYS: Avoid -Wflex-array-member-not-at-end warning
crypto: ccree - Correctly handle return of sg_nents_for_len
crypto: starfive - Correctly handle return of sg_nents_for_len
crypto: iaa - Fix incorrect return value in save_iaa_wq()
crypto: zstd - Remove unnecessary size_t cast
...
This pull request includes couple of updates for trusted keys:
1. Remove duplicate 'tpm2_hash_map' and use the one in the drive via new
function 'tpm2_find_hash_alg'.
2. Fix a memory leak on failure paths of 'tpm2_load_cmd'.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaStg0gAKCRAaerohdGur
0gdUAQCit+7Vwpc2oArfJoCFI1ILhLArPSUlBI0ZUB+BpBNZbQD/T1TwdT3Ytekf
jwkKrJbavuFQ+u5pUb2WShQJ7WOcBg4=
=jor5
-----END PGP SIGNATURE-----
Merge tag 'keys-trusted-next-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull trusted key updates from Jarkko Sakkinen:
- Remove duplicate 'tpm2_hash_map' in favor of 'tpm2_find_hash_alg()'
- Fix a memory leak on failure paths of 'tpm2_load_cmd'
* tag 'keys-trusted-next-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
KEYS: trusted: Fix a memory leak in tpm2_load_cmd
KEYS: trusted: Replace a redundant instance of tpm2_hash_map
-----BEGIN PGP SIGNATURE-----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=naRd
-----END PGP SIGNATURE-----
Merge tag 'random-6.19-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Dynamically allocate cpumasks off of the stack if the kernel is
configured for a lot of CPUs, to handle a -Wframe-larger-than case
- The removal of next_pseudo_random32() after the last user was
switched over to the prandom interface
- The removal of get_random_u{8,16,32,64}_wait() functions, as there
were no users of those at all
- Some house keeping changes - a few grammar cleanups in the
comments, system_unbound_wq was renamed to system_dfl_wq, and
static_key_initialized no longer needs to be checked
* tag 'random-6.19-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: complete sentence of comment
random: drop check for static_key_initialized
random: remove unused get_random_var_wait functions
random: replace use of system_unbound_wq with system_dfl_wq
random: use offstack cpumask when necessary
prandom: remove next_pseudo_random32
media: vivid: use prandom
random: add missing words in function comments
This is the main crypto library pull request for 6.19. It includes:
- Add SHA-3 support to lib/crypto/, including support for both the
hash functions and the extendable-output functions. Reimplement the
existing SHA-3 crypto_shash support on top of the library.
This is motivated mainly by the upcoming support for the ML-DSA
signature algorithm, which needs the SHAKE128 and SHAKE256
functions. But even on its own it's a useful cleanup.
This also fixes the longstanding issue where the
architecture-optimized SHA-3 code was disabled by default.
- Add BLAKE2b support to lib/crypto/, and reimplement the existing
BLAKE2b crypto_shash support on top of the library.
This is motivated mainly by btrfs, which supports BLAKE2b checksums.
With this change, all btrfs checksum algorithms now have library
APIs. btrfs is planned to start just using the library directly.
This refactor also improves consistency between the BLAKE2b code and
BLAKE2s code. And as usual, it also fixes the issue where the
architecture-optimized BLAKE2b code was disabled by default.
- Add POLYVAL support to lib/crypto/, replacing the existing POLYVAL
support in crypto_shash. Reimplement HCTR2 on top of the library.
This simplifies the code and improves HCTR2 performance. As usual,
it also makes the architecture-optimized code be enabled by default.
The generic implementation of POLYVAL is greatly improved as well.
- Clean up the BLAKE2s code.
- Add FIPS self-tests for SHA-1, SHA-2, and SHA-3.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaSurXBQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK4RhAQC/ZWiFD8MAnyBSVEeo5G5wr835bGl0
FbXLdIT8orj/mAD+JgO9LaE15THL+Cy7K9VO4XN6HjbKd/7FdshYlrqrag8=
=qitH
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
"This is the main crypto library pull request for 6.19. It includes:
- Add SHA-3 support to lib/crypto/, including support for both the
hash functions and the extendable-output functions. Reimplement the
existing SHA-3 crypto_shash support on top of the library.
This is motivated mainly by the upcoming support for the ML-DSA
signature algorithm, which needs the SHAKE128 and SHAKE256
functions. But even on its own it's a useful cleanup.
This also fixes the longstanding issue where the
architecture-optimized SHA-3 code was disabled by default.
- Add BLAKE2b support to lib/crypto/, and reimplement the existing
BLAKE2b crypto_shash support on top of the library.
This is motivated mainly by btrfs, which supports BLAKE2b
checksums. With this change, all btrfs checksum algorithms now have
library APIs. btrfs is planned to start just using the library
directly.
This refactor also improves consistency between the BLAKE2b code
and BLAKE2s code. And as usual, it also fixes the issue where the
architecture-optimized BLAKE2b code was disabled by default.
- Add POLYVAL support to lib/crypto/, replacing the existing POLYVAL
support in crypto_shash. Reimplement HCTR2 on top of the library.
This simplifies the code and improves HCTR2 performance. As usual,
it also makes the architecture-optimized code be enabled by
default. The generic implementation of POLYVAL is greatly improved
as well.
- Clean up the BLAKE2s code
- Add FIPS self-tests for SHA-1, SHA-2, and SHA-3"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (37 commits)
fscrypt: Drop obsolete recommendation to enable optimized POLYVAL
crypto: polyval - Remove the polyval crypto_shash
crypto: hctr2 - Convert to use POLYVAL library
lib/crypto: x86/polyval: Migrate optimized code into library
lib/crypto: arm64/polyval: Migrate optimized code into library
lib/crypto: polyval: Add POLYVAL library
crypto: polyval - Rename conflicting functions
lib/crypto: x86/blake2s: Use vpternlogd for 3-input XORs
lib/crypto: x86/blake2s: Avoid writing back unchanged 'f' value
lib/crypto: x86/blake2s: Improve readability
lib/crypto: x86/blake2s: Use local labels for data
lib/crypto: x86/blake2s: Drop check for nblocks == 0
lib/crypto: x86/blake2s: Fix 32-bit arg treated as 64-bit
lib/crypto: arm, arm64: Drop filenames from file comments
lib/crypto: arm/blake2s: Fix some comments
crypto: s390/sha3 - Remove superseded SHA-3 code
crypto: sha3 - Reimplement using library API
crypto: jitterentropy - Use default sha3 implementation
lib/crypto: s390/sha3: Add optimized one-shot SHA-3 digest functions
lib/crypto: sha3: Support arch overrides of one-shot digest functions
...
'trusted_tpm2' duplicates 'tpm2_hash_map' originally part of the TPN
driver, which is suboptimal.
Implement and export `tpm2_find_hash_alg()` in the driver, and substitute
the redundant code in 'trusted_tpm2' with a call to the new function.
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Discovered by Atuin - Automated Vulnerability Discovery Engine.
In ac_ioctl, the validation of IndexCard and the check for a valid
RamIO pointer are skipped when cmd is 6. However, the function
unconditionally executes readb(apbs[IndexCard].RamIO + VERS) at the
end.
If cmd is 6, IndexCard may reference a board that does not exist
(where RamIO is NULL), leading to a NULL pointer dereference.
Fix this by skipping the readb access when cmd is 6, as this
command is a global information query and does not target a specific
board context.
Signed-off-by: Tianchu Chen <flynnnchen@tencent.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20251128155323.a786fde92ebb926cbe96fcb1@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace non-standard %Ld with %lld to ensure compliance with the kernel
coding style and potential formatting issues.
Signed-off-by: Clint George <clintbgeorge@gmail.com>
Link: https://patch.msgid.link/20251111151340.9162-3-clintbgeorge@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace printk(KERN_CRIT ...) with pr_crit(...) and printk() with
pr_debug(). The change aims to make logging more consistent and
readable.
Signed-off-by: Clint George <clintbgeorge@gmail.com>
Link: https://patch.msgid.link/20251111151340.9162-2-clintbgeorge@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds the WQ_UNBOUND flag to explicitly request
alloc_workqueue() to be unbound, because this specific workload has no
benefit being per-cpu.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Acked-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://patch.msgid.link/20251107163755.356187-1-marco.crivellari@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
typedefs are unnecessary here. They rather obfuscate the code than help.
So drop them and use the types directly.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251119091949.825958-7-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PRINTK_ERROR() + KERN_ERR_MWAVE are just wrappers around printk() with
a prefix. Instead, pr_fmt() can be used. Drop the former and use the
latter.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251119091949.825958-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The printk tracing makes the code hard to follow for no good benefit.
Everyone can use dynamic tracing and/or kprobes.
Drop this unreadable bloatware too.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251119091949.825958-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
file_operations::{read/write/open/release} need not be defined. The core
code return proper values already (the same as the being removed ones).
So there is no need to preserve these just for tracing via printk.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251119091949.825958-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In mwave, a lot of code depends on the MWAVE_FUTZ_WITH_OTHER_DEVICES
macro. That can be defined in Makefile to compile this in.
1) The code is completely unreadable.
2) Recompiling the kernel to have this untested code compiled in is not
a good idea.
Drop all this.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251119091949.825958-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In mwave, there is a lot of commented code for a long time. Drop it.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251119091949.825958-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The KMSG_COMPONENT macro is a leftover of the s390 specific "kernel
message catalog" which never made it upstream.
Remove the macro in order to get rid of a pointless indirection. Replace
all users with the string it defines. In almost all cases this leads to a
simple replacement like this:
- #define KMSG_COMPONENT "appldata"
- #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+ #define pr_fmt(fmt) "appldata: " fmt
Except for some special cases this is just mechanical/scripted work.
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-12-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Update the mem char driver (backing /dev/mem and /dev/zero) to use
f_op->mmap_prepare hook rather than the deprecated f_op->mmap.
The /dev/zero implementation has a very unique and rather concerning
characteristic in that it converts MAP_PRIVATE mmap() mappings anonymous
when they are, in fact, not.
The new f_op->mmap_prepare() can support this, but rather than introducing
a helper function to perform this hack (and risk introducing other users),
utilise the success hook to do so.
We utilise the newly introduced shmem_zero_setup_desc() to allow for the
shared mapping case via an f_op->mmap_prepare() hook.
We also use the desc->action_error_hook to filter the remap error to
-EAGAIN to keep behaviour consistent.
Link: https://lkml.kernel.org/r/48f60764d7a6901819d1af778fa33b775d2e8c77.1760959442.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Chatre, Reinette <reinette.chatre@intel.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Robin Murohy <robin.murphy@arm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm_get_unmapped_area() is a wrapper around arch_get_unmapped_area() /
arch_get_unmapped_area_topdown(), both of which search current->mm for
some free space. Neither take an mm_struct - they implicitly operate on
current->mm.
But the wrapper takes an mm_struct and uses it to decide whether to search
bottom up or top down. All callers pass in current->mm for this, so
everything is working consistently. But it feels like an accident waiting
to happen; eventually someone will call that function with a different mm,
expecting to find free space in it, but what gets returned is free space
in the current mm.
So let's simplify by removing the parameter and have the wrapper use
current->mm to decide which end to start at. Now everything is consistent
and self-documenting.
Link: https://lkml.kernel.org/r/20251003155306.2147572-1-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Driver's probe function matches against driver's of_device_id table,
where each entry has non-NULL match data, so of_match_node() can be
simplified with of_device_get_match_data().
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convention is to place MODULE_DEVICE_TABLE() immediately after
definition of the affected table, so one can easily spot missing such.
There is on the other hand no benefits of putting MODULE_DEVICE_TABLE()
far away.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit e871abcda3 ("random: handle creditable entropy from atomic
process context") added the use of workqueues, which meant testing
whether the workqueue is valid, but it did not remove the existing check
of whether static keys have been initialized. This static key check is
unnecessary because workqueues are initialized long after it. And
semantically it doesn't make much sense either, because it's not really
directly calling a static key function in the condition.
Remove the now unnecessary check.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
[Jason: rewrite commit message with different explanation, rebase on
random.git, and update code comment.]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
system_unbound_wq has been renamed to system_dfl_wq in 128ea9f6cc
("workqueue: Add system_percpu_wq and system_dfl_wq"), so update
random.c's usage of it system_unbound_wq to reflect the new change. The
old system_unbound_wq is slated for removal in the next few cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The entropy generation function keeps a local cpu mask on the stack,
which can trigger warnings in configurations with a large number of
CPUs:
drivers/char/random.c:1292:20: error: stack frame size (1288)
exceeds limit (1280) in 'try_to_generate_entropy' [-Werror,-Wframe-larger-than]
Use the cpumask interface to dynamically allocate it in those
configurations.
Fixes: 1c21fe00ed ("random: spread out jitter callback to different CPUs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
For consistency with the SHA-1, SHA-2, SHA-3 (in development), and MD5
library APIs, rename blake2s_state to blake2s_ctx.
As a refresher, the ctx name:
- Is a bit shorter.
- Avoids confusion with the compression function state, which is also
often called the state (but is just part of the full context).
- Is consistent with OpenSSL.
Not a big deal, of course. But consistency is nice. With a BLAKE2b
library API about to be added, this is a convenient time to update this.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reorder the parameters of blake2s() from (out, in, key, outlen, inlen,
keylen) to (key, keylen, in, inlen, out, outlen).
This aligns BLAKE2s with the common conventions of pairing buffers and
their lengths, and having outputs follow inputs. This is widely used
elsewhere in lib/crypto/ and crypto/, and even elsewhere in the BLAKE2s
code itself such as blake2s_init_key() and blake2s_final(). So
blake2s() was a bit of an exception.
Notably, this results in the same order as hmac_*_usingrawkey().
Note that since the type signature changed, it's not possible for a
blake2s() call site to be silently missed.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
We need the fixes in here, and it resolves a merge conflict in:
drivers/misc/amd-sbi/Kconfig
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The API for apm_get_power_status is "call it if it isn't NULL",
except it's also initialised with a no-op __apm_get_power_status.
This was added alongside apm_get_power_status in 2007.
The apm_get_power_status symbol is used in these files:
arch/arm/mach-pxa/sharpsl_pm.c:extern void (*apm_get_power_status)(struct apm_power_info *);
arch/arm/mach-pxa/sharpsl_pm.c: apm_get_power_status = sharpsl_apm_get_power_status;
arch/sh/boards/mach-hp6xx/hp6xx_apm.c: apm_get_power_status = hp6x0_apm_get_power_status;
drivers/char/apm-emulation.c:void (*apm_get_power_status)(struct apm_power_info *) = __apm_get_power_status;
drivers/char/apm-emulation.c:EXPORT_SYMBOL(apm_get_power_status);
drivers/char/apm-emulation.c: if (apm_get_power_status)
drivers/char/apm-emulation.c: apm_get_power_status(&info);
drivers/macintosh/apm_emu.c: apm_get_power_status = pmu_apm_get_power_status;
drivers/macintosh/apm_emu.c: if (apm_get_power_status == pmu_apm_get_power_status)
drivers/macintosh/apm_emu.c: apm_get_power_status = NULL;
drivers/power/supply/apm_power.c: apm_get_power_status = apm_battery_apm_get_power_status;
drivers/power/supply/apm_power.c: apm_get_power_status = NULL;
include/linux/apm-emulation.h:extern void (*apm_get_power_status)(struct apm_power_info *);
All of them are compatible with the API (post-remove UAFs notwithstanding)
and don't even read it except to compare with their own values;
on a cursory glance this doesn't seem to have ever not been the case.
Fixes: 7726942fb1 ("[APM] Add shared version of APM emulation")
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Link: https://patch.msgid.link/ba3nzxffdpuz2eo5kbpm5iez2rcdves3qpd4kvnmshxwjburwo@tarta.nabijaczleweli.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace min() and manual casting of MAX_BUF_SZ with min_t(size_t,,) in
both adi_read() and adi_write().
This matches the initial buffer size calculation:
ver_buf_sz = min_t(size_t, count, MAX_BUF_SZ);
and makes the code more consistent. No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250908181354.436680-2-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the CRB over FF-A specification [1], a TPM that implements
the ABI must comply with the TCG PTP specification. This requires support
for the Idle and Ready states.
This patch implements CRB control area requests for goIdle and
cmdReady on FF-A based TPMs.
The FF-A message used to notify the TPM of CRB updates includes a
locality parameter, which provides a hint to the TPM about which
locality modified the CRB. This patch adds a locality parameter
to __crb_go_idle() and __crb_cmd_ready() to support this.
[1] https://developer.arm.com/documentation/den0138/latest/
Signed-off-by: Stuart Yoder <stuart.yoder@arm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The HW RNG core allows for manual selection of which RNG device to use,
but does not allow for no device to be enabled. It may be desirable to
do this on systems with only a single suitable hardware RNG, where we
need exclusive access to other functionality on this device. In
particular when performing TPM firmware upgrades this lets us ensure the
kernel does not try to access the device.
Before:
root@debian-qemu-efi:~# grep "" /sys/devices/virtual/misc/hw_random/rng_*
/sys/devices/virtual/misc/hw_random/rng_available:tpm-rng-0
/sys/devices/virtual/misc/hw_random/rng_current:tpm-rng-0
/sys/devices/virtual/misc/hw_random/rng_quality:1024
/sys/devices/virtual/misc/hw_random/rng_selected:0
After:
root@debian-qemu-efi:~# grep "" /sys/devices/virtual/misc/hw_random/rng_*
/sys/devices/virtual/misc/hw_random/rng_available:tpm-rng-0 none
/sys/devices/virtual/misc/hw_random/rng_current:tpm-rng-0
/sys/devices/virtual/misc/hw_random/rng_quality:1024
/sys/devices/virtual/misc/hw_random/rng_selected:0
root@debian-qemu-efi:~# echo none > /sys/devices/virtual/misc/hw_random/rng_current
root@debian-qemu-efi:~# grep "" /sys/devices/virtual/misc/hw_random/rng_*
/sys/devices/virtual/misc/hw_random/rng_available:tpm-rng-0 none
/sys/devices/virtual/misc/hw_random/rng_current:none
grep: /sys/devices/virtual/misc/hw_random/rng_quality: No such device
/sys/devices/virtual/misc/hw_random/rng_selected:1
(Observe using bpftrace no calls to TPM being made)
root@debian-qemu-efi:~# echo "" > /sys/devices/virtual/misc/hw_random/rng_current
root@debian-qemu-efi:~# grep "" /sys/devices/virtual/misc/hw_random/rng_*
/sys/devices/virtual/misc/hw_random/rng_available:tpm-rng-0 none
/sys/devices/virtual/misc/hw_random/rng_current:tpm-rng-0
/sys/devices/virtual/misc/hw_random/rng_quality:1024
/sys/devices/virtual/misc/hw_random/rng_selected:0
(Observe using bpftrace that calls to the TPM resume)
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
