A collection of small fixes that have been gathered in the week.
- Fix the missing XRUN handling in USB-audio low latency mode
- Fix regression by the previous USB-audio hadening change
- Clean up old SH sound driver to use the standard helpers
- A few further fixes for MIDI 2.0 UMP handling
- Various HD-audio and USB-audio quirks
- Fix jack handling at PM on ASoC Intel AVS
- Misc small fixes for ASoC SOF and Mediatek
-----BEGIN PGP SIGNATURE-----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=WExA
-----END PGP SIGNATURE-----
Merge tag 'sound-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes that have been gathered in the week.
- Fix the missing XRUN handling in USB-audio low latency mode
- Fix regression by the previous USB-audio hadening change
- Clean up old SH sound driver to use the standard helpers
- A few further fixes for MIDI 2.0 UMP handling
- Various HD-audio and USB-audio quirks
- Fix jack handling at PM on ASoC Intel AVS
- Misc small fixes for ASoC SOF and Mediatek"
* tag 'sound-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix spelling mistake "Firelfy" -> "Firefly"
ASoC: mediatek: mt8188-mt6359: Remove hardcoded dmic codec
ALSA: hda/realtek: fix micmute LEDs don't work on HP Laptops
ALSA: usb-audio: Add extra PID for RME Digiface USB
ALSA: usb-audio: Fix a DMA to stack memory bug
ASoC: SOF: ipc3-topology: fix resource leaks in sof_ipc3_widget_setup_comp_dai()
ALSA: hda/realtek: Add support for Samsung Galaxy Book3 360 (NP730QFG)
ASoC: Intel: avs: da7219: Remove suspend_pre() and resume_post()
ALSA: hda/tas2781: Fix error code tas2781_read_acpi()
ALSA: hda/realtek: Enable mute and micmute LED on HP ProBook 430 G8
ALSA: usb-audio: add mixer mapping for Corsair HS80
ALSA: ump: Shut up truncated string warning
ALSA: sh: Use standard helper for buffer accesses
ALSA: usb-audio: Notify xrun for low-latency mode
ALSA: hda/conexant: fix Z60MR100 startup pop issue
ALSA: ump: Update legacy substream names upon FB info update
ALSA: ump: Indicate the inactive group in legacy substream names
ALSA: ump: Don't open legacy substream for an inactive group
ALSA: seq: ump: Fix seq port updates per FB info notify
Remove hardcoded dmic codec from the UL_SRC dai link to avoid requiring
a dmic codec to be present for the driver to probe, as not every
MT8188-based platform might need a dmic codec. The codec can be assigned
to the dai link through the dai-link property in Devicetree on the
platforms where it is needed.
No Devicetree currently relies on it so it is safe to remove without
worrying about backward compatibility.
Fixes: 9f08dcbdde ("ASoC: mediatek: mt8188-mt6359: support new board with nau88255")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20241203-mt8188-6359-unhardcode-dmic-v1-1-346e3e5cbe6d@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The presence of a plugged jack is not detected after resuming the device
if the jack was plugged before the device was suspended. This problem is
caused by calling the
sound/soc/codecs/da7219-aad.c:da7219_aad_jack_det() function on resume,
which forces the jack insertion state to be unplugged.
Signed-off-by: Marek Maslanka <mmaslanka@google.com>
Link: https://patch.msgid.link/20241128205215.2435485-1-mmaslanka@google.com
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of small fixes. Majority of changes are device-specific
fixes and quirks, while there are a few core fixes to address
regressions and corner cases spotted by fuzzers.
- Fix of spinlock range that wrongly covered kvfree() call in rawmidi
- Fix potential NULL dereference at PCM mmap
- Fix incorrectly advertised MIDI 2.0 UMP Function Block info
- Various ASoC AMD quirks and fixes
- ASoC SOF Intel, Mediatek, HDMI-codec fixes
- A few more quirks and TAS2781 codec fix for HD-audio
- A couple of fixes for USB-audio for malicious USB descriptors
-----BEGIN PGP SIGNATURE-----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=FLBb
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. Majority of changes are device-specific
fixes and quirks, while there are a few core fixes to address
regressions and corner cases spotted by fuzzers.
- Fix of spinlock range that wrongly covered kvfree() call in rawmidi
- Fix potential NULL dereference at PCM mmap
- Fix incorrectly advertised MIDI 2.0 UMP Function Block info
- Various ASoC AMD quirks and fixes
- ASoC SOF Intel, Mediatek, HDMI-codec fixes
- A few more quirks and TAS2781 codec fix for HD-audio
- A couple of fixes for USB-audio for malicious USB descriptors"
* tag 'sound-fix-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda: improve bass speaker support for ASUS Zenbook UM5606WA
ALSA: hda/realtek: Apply quirk for Medion E15433
ASoC: amd: yc: Add a quirk for microfone on Lenovo ThinkPad P14s Gen 5 21MES00B00
ASoC: SOF: ipc3-topology: Convert the topology pin index to ALH dai index
ASoC: mediatek: Check num_codecs is not zero to avoid panic during probe
ASoC: amd: yc: Fix for enabling DMIC on acp6x via _DSD entry
ALSA: ump: Fix evaluation of MIDI 1.0 FB info
ALSA: core: Fix possible NULL dereference caused by kunit_kzalloc()
ALSA: hda: Show the codec quirk info at probing
ALSA: asihpi: Remove unused variable
ALSA: hda/realtek: Set PCBeep to default value for ALC274
ALSA: hda/tas2781: Add speaker id check for ASUS projects
ALSA: hda/realtek: Update ALC225 depop procedure
ALSA: hda/realtek: Enable speaker pins for Medion E15443 platform
ALSA: hda/realtek: fix mute/micmute LEDs don't work for EliteBook X G1i
ALSA: usb-audio: Fix out of bounds reads when finding clock sources
ALSA: rawmidi: Fix kvfree() call in spinlock
ALSA: hda/realtek: Fix Internal Speaker and Mic boost of Infinix Y4 Max
ASoC: amd: yc: Add quirk for microphone on Lenovo Thinkpad T14s Gen 6 21M1CTO1WW
ASoC: doc: dapm: Add location information for dapm-graph tool
...
- structure optimization of few bus structures and header updates
- support for 2.0 disco spec
- amd driver updates for acp revision, refactoring code and support for
acp6.3
- soft reset support for cadence driver
-----BEGIN PGP SIGNATURE-----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=3Ob7
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- structure optimization of few bus structures and header updates
- support for 2.0 disco spec
- amd driver updates for acp revision, refactoring code and support for
acp6.3
- soft reset support for cadence driver
* tag 'soundwire-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (24 commits)
soundwire: Minor formatting fixups in sdw.h header
soundwire: Update the includes on the sdw.h header
soundwire: cadence: clear MCP BLOCK_WAKEUP in init
soundwire: cadence: add soft-reset on startup
soundwire: intel_auxdevice: add kernel parameter for mclk divider
soundwire: mipi-disco: add support for DP0/DPn 'lane-list' property
soundwire: mipi-disco: add new properties from 2.0 spec
soundwire: mipi-disco: add comment on DP0-supported property
soundwire: mipi-disco: add support for peripheral channelprepare timeout
soundwire: mipi_disco: add support for clock-scales property
soundwire: mipi-disco: add error handling for property array read
soundwire: mipi-disco: remove DPn audio-modes
soundwire: optimize sdw_dpn_prop
soundwire: optimize sdw_dp0_prop
soundwire: optimize sdw_slave_prop
soundwire: optimize sdw_bus structure
soundwire: optimize sdw_master_prop
soundwire: optimize sdw_stream_runtime memory layout
soundwire: mipi_disco: add MIPI-specific property_read_bool() helpers
soundwire: Correct some typos in comments
...
Intel SoundWire machine driver always uses Pin number 2 and above.
Currently, the pin number is used as the FW DAI index directly. As a
result, FW DAI 0 and 1 are never used. That worked fine because we use
up to 2 DAIs in a SDW link. Convert the topology pin index to ALH dai
index, the mapping is using 2-off indexing, iow, pin #2 is ALH dai #0.
The issue exists since beginning. And the Fixes tag is the first commit
that this commit can be applied.
Fixes: b66bfc3a98 ("ASoC: SOF: sof-audio: Fix broken early bclk feature for SSP")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241127092955.20026-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following commit 13f58267cd ("ASoC: soc.h: don't create dummy
Component via COMP_DUMMY()"), COMP_DUMMY() became an array with zero
length, and only gets populated with the dummy struct after the card is
registered. Since the sound card driver's probe happens before the card
registration, accessing any of the members of a dummy component during
probe will result in undefined behavior.
This can be observed in the mt8188 and mt8195 machine sound drivers. By
omitting a dai link subnode in the sound card's node in the Devicetree,
the default uninitialized dummy codec is used, and when its dai_name
pointer gets passed to strcmp() it results in a null pointer dereference
and a kernel panic.
In addition to that, set_card_codec_info() in the generic helpers file,
mtk-soundcard-driver.c, will populate a dai link with a dummy codec when
a dai link node is present in DT but with no codec property.
The result is that at probe time, a dummy codec can either be
uninitialized with num_codecs = 0, or be an initialized dummy codec,
with num_codecs = 1 and dai_name = "snd-soc-dummy-dai". In order to
accommodate for both situations, check that num_codecs is not zero
before accessing the codecs' fields but still check for the codec's dai
name against "snd-soc-dummy-dai" as needed.
While at it, also drop the check that dai_name is not null in the mt8192
driver, introduced in commit 4d4e1b6319 ("ASoC: mediatek: mt8192:
Check existence of dai_name before dereferencing"), as it is actually
redundant given the preceding num_codecs != 0 check.
Fixes: 13f58267cd ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Acked-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://patch.msgid.link/20241126-asoc-mtk-dummy-panic-v1-1-42d53e168d2e@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add condition check to register ACP PDM sound card by reading
_WOV acpi entry.
Fixes: 5426f506b5 ("ASoC: amd: Add support for enabling DMIC on acp6x via _DSD")
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20241127112227.227106-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
tps65010, have undergone minor code improvements to enhance consistency and
fix race conditions.
- The syscon driver now utilizes the regmap max_register_is_0 capability
for consistent register map configuration across syscons of all sizes.
- New device support has been added for QCS8300, qcs615, SA8255p, and
samsung,s2dos05, expanding the range of compatible hardware.
- The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
and avoids loading the charger with UCSI, streamlining functionality.
- The bd96801 driver now utilizes the more modern maple tree register
cache, improving performance.
- The da9052-spi driver has undergone a fix to change the read-mask to
write-mask, preventing potential issues.
- Unused declarations in max77693 have been removed, and support for
samsung,s2dos05 has been added, enhancing code clarity and device compatibility.
- Error handling in cs42l43 has been fixed to avoid unbalanced regulator
put and ensure proper synchronization during driver removal.
- The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
MODULE_ALIAS(), improving code consistency.
- Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
and reorganized for better clarity and maintainability.
- The intel_soc_pmic_bxtwc driver has undergone significant improvements,
including the use of IRQ domains for various devices, fixing IRQ domain names
duplication, and code refactoring for better consistency and maintainability.
- The ipaq-micro driver has received a fix for a missing break statement in
the default case, enhancing code robustness.
- Support for the AXP323 PMIC has been added to the axp20x driver, along
with ensuring a clear relationship between IDs and model names, and allowing
multiple regulators, broadening hardware compatibility.
- The cs42l43 driver now disables IRQs during suspend for improved power
management.
- The adp5585 driver has reduced its dependencies by dropping the obsolete
dependency on COMPILE_TEST.
- Initial support for the MT6328 PMIC has been added to the mt6397 driver,
expanding the range of supported hardware.
- The rtc-bd70528 driver has been simplified by dropping the IC name from
IRQ, improving code readability.
- Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
updated to enhance clarity and incorporate new features.
- The rt5033 driver has received a fix for a missing regmap_del_irq_chip()
in the error handling path.
- New device support has been added for MSM8917, and the
intel_soc_pmic_crc driver now supports non-ACPI instantiated i2c_client.
- The 88pm886 driver has added support for the RTC cell, and the tqmx86
driver has improved its GPIO IRQ setup and added I2C IRQ support,
increasing functionality.
- The sprd,sc2731 DT schema has been updated and converted to YAML format
for better readability and maintainability.
-----BEGIN PGP SIGNATURE-----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=YP3r
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
- Several drivers, including atmel-flexcom/rk8xx-core, palmas, and
tps65010, have undergone minor code improvements to enhance
consistency and fix race conditions.
- The syscon driver now utilizes the regmap max_register_is_0
capability for consistent register map configuration across syscons
of all sizes.
- New device support has been added for QCS8300, qcs615, SA8255p, and
samsung,s2dos05, expanding the range of compatible hardware.
- The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
and avoids loading the charger with UCSI, streamlining functionality.
- The bd96801 driver now utilizes the more modern maple tree register
cache, improving performance.
- The da9052-spi driver has undergone a fix to change the read-mask to
write-mask, preventing potential issues.
- Unused declarations in max77693 have been removed, and support for
samsung,s2dos05 has been added, enhancing code clarity and device
compatibility.
- Error handling in cs42l43 has been fixed to avoid unbalanced
regulator put and ensure proper synchronization during driver
removal.
- The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
MODULE_ALIAS(), improving code consistency.
- Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
and reorganized for better clarity and maintainability.
- The intel_soc_pmic_bxtwc driver has undergone significant
improvements, including the use of IRQ domains for various devices,
fixing IRQ domain names duplication, and code refactoring for better
consistency and maintainability.
- The ipaq-micro driver has received a fix for a missing break
statement in the default case, enhancing code robustness.
- Support for the AXP323 PMIC has been added to the axp20x driver,
along with ensuring a clear relationship between IDs and model names,
and allowing multiple regulators, broadening hardware compatibility.
- The cs42l43 driver now disables IRQs during suspend for improved
power management.
- The adp5585 driver has reduced its dependencies by dropping the
obsolete dependency on COMPILE_TEST.
- Initial support for the MT6328 PMIC has been added to the mt6397
driver, expanding the range of supported hardware.
- The rtc-bd70528 driver has been simplified by dropping the IC name
from IRQ, improving code readability.
- Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
updated to enhance clarity and incorporate new features.
- The rt5033 driver has received a fix for a missing
regmap_del_irq_chip() in the error handling path.
- New device support has been added for MSM8917, and the
intel_soc_pmic_crc driver now supports non-ACPI instantiated
i2c_client.
- The 88pm886 driver has added support for the RTC cell, and the tqmx86
driver has improved its GPIO IRQ setup and added I2C IRQ support,
increasing functionality.
- The sprd,sc2731 DT schema has been updated and converted to YAML
format for better readability and maintainability.
* tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits)
dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm
dt-bindings: mfd: sprd,sc2731: Convert to YAML
mfd: tqmx86: Add I2C IRQ support
mfd: tqmx86: Make IRQ setup errors non-fatal
mfd: tqmx86: Refactor GPIO IRQ setup
mfd: tqmx86: Improve gpio_irq module parameter description
mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S
mfd: 88pm886: Add the RTC cell
dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client
mfd: intel_soc_pmic_*: Consistently use filename as driver name
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917
mfd: rt5033: Fix missing regmap_del_irq_chip()
mfd: cgbc-core: Fix error handling paths in cgbc_init_device()
dt-bindings: mfd: aspeed: Support for AST2700
mfd: Switch back to struct platform_driver::remove()
dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750
mfd: rtc: bd7xxxx Drop IC name from IRQ
mfd: mt6397: Add initial support for MT6328
mfd: adp5585: Drop obsolete dependency on COMPILE_TEST
...
This is a relatively calm cycle, and majority of changes are about
ASoC. There are little changes in the core side but we received
lots of new drivers for new vendors.
* ALSA Core:
- The new accel operation mode for compress-offload API;
only the core part, and the actual user will follow at next
* ASoC:
- Continued API simplification works
- Renaming of the sh directory to Renesas
- Factoring out of some of the common code for Realtek devices
- Ussal ASoC Intel SOF, AMD and SoundWire updates
- Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307,
Longsoon I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342,
Qualcomm SM8750, RealTek RT721, and ST Microelectronics STM32MP25
* HD- and USB-audio:
- Clean up of IRQ handling in legacy HD-audio driver
- Fix soft lockup at disconnection of non-standard USB drivers
- Scarlett2 mixer improvements
- New quirks and cleanups in HD- and USB-audio
-----BEGIN PGP SIGNATURE-----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=gOHc
-----END PGP SIGNATURE-----
Merge tag 'sound-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This is a relatively calm cycle, and majority of changes are about
ASoC. There are little changes in the core side but we received lots
of new drivers for new vendors.
ALSA Core:
- The new accel operation mode for compress-offload API; only the
core part, the actual user will follow later
ASoC:
- Continued API simplification works
- Renaming of the sh directory to Renesas
- Factoring out of some of the common code for Realtek devices
- Ussal ASoC Intel SOF, AMD and SoundWire updates
- Support for Allwinner H616, AMD ACP 6.3 systems, AWInic AW88081,
Cirrus Logic CS32L84, Everest ES8328, Iron Devices SMA1307,
Longsoon I2S, NeoFidelity NTP8918 and NTP8835, Philips UDA1342,
Qualcomm SM8750, RealTek RT721, and ST Microelectronics STM32MP25
HD- and USB-audio:
- Clean up of IRQ handling in legacy HD-audio driver
- Fix soft lockup at disconnection of non-standard USB drivers
- Scarlett2 mixer improvements
- New quirks and cleanups in HD- and USB-audio"
* tag 'sound-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (278 commits)
ALSA: hda: Poll jack events for LS7A HD-Audio
ASoC: hdmi-codec: reorder channel allocation list
ALSA: ump: Fix the wrong format specifier
ASoC: Intel: soc-acpi-intel-lnl-match: add rt712_vb + rt1320 support
ASoC: stm32: dfsdm: change rate upper limits
ASoC: sma1307: fix uninitialized variable refence
ASoC: dt-bindings: simple-mux: add idle-state property
ASoc: simple-mux: add idle-state support
ASoC: sdca: test adev before calling acpi_dev_for_each_child
ASoC: SOF: ipc4-topology: remove redundant assignment to variable ret
ASoC: amd: ps: fix the pcm device numbering for acp 6.3 platform
ASoC: amd: acp: add soundwire machine driver for legacy stack
ASoC: amd: acp: move get_acp63_cpu_pin_id() to common file
ASoC: amd: ps: add soundwire machines for acp6.3 platform
ASoC: amd: acp: add RT711, RT714 & RT1316 support for acp 6.3 platform
ASoC: amd: acp: add rt722 based soundwire machines
ALSA: compress_offload: Add missing descriptions in structs
ALSA: 6fire: Release resources at card release
ALSA: caiaq: Use snd_card_free_when_closed() at disconnection
ALSA: us122l: Drop mmap_count field
...
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in imx_audmix_probe() is not checked.
Add NULL check in imx_audmix_probe(), to handle kernel NULL
pointer dereference error.
Fixes: 05d996e113 ("ASoC: imx-audmix: Split capture device for audmix")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://patch.msgid.link/20241118084553.4195-1-hanchunchao@inspur.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples.
Fix the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys address
of the DTB as __pa() is not always valid to use. This fixes a warning
for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports and
endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever possible
-----BEGIN PGP SIGNATURE-----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=NCYS
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples. Fix
the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys
address of the DTB as __pa() is not always valid to use. This fixes
a warning for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports
and endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever
possible"
* tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits)
of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
of/address: Rework bus matching to avoid warnings
of: WARN on deprecated #address-cells/#size-cells handling
of/fdt: Don't use default address cell sizes for address translation
dt-bindings: Enable dtc "interrupt_provider" warnings
of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
media: xilinx-tpg: use new of_graph functions
fbdev: omapfb: use new of_graph functions
gpu: drm: omapdrm: use new of_graph functions
ASoC: audio-graph-card2: use new of_graph functions
ASoC: audio-graph-card: use new of_graph functions
ASoC: test-component: use new of_graph functions
of: property: use new of_graph functions
of: property: add of_graph_get_next_port_endpoint()
of: property: add of_graph_get_next_port()
of: module: remove strlen() call in of_modalias()
...
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the signal
of the timer is ignored so that the timer signal can be delivered once
the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small intervals
and keeps the system pointlessly out of low power states for no value.
This is a long standing non-trivial problem due to the lock order of
posix-timer lock and the sighand lock along with life time issues as
the timer and the sigqueue have different life time rules.
Cure this by:
* Embedding the sigqueue into the timer struct to have the same life
time rules. Aside of that this also avoids the lookup of the timer
in the signal delivery and rearm path as it's just a always valid
container_of() now.
* Queuing ignored timer signals onto a seperate ignored list.
* Moving queued timer signals onto the ignored list when the signal is
switched to SIG_IGN before it could be delivered.
* Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal delivery
code to rearm the timer.
This also required to consolidate the signal delivery rules so they are
consistent across all situations. With that all self test scenarios
finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time stamps
by default and switch to fine grained time stamps when inode attributes
are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that the
VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
* Move all sleep and timeout functions into one file
* Rework udelay() and ndelay() into proper documented inline functions
and replace the hardcoded magic numbers by proper defines.
* Rework the fsleep() implementation to take the reality of the timer
wheel granularity on different HZ values into account. Right now the
boundaries are hard coded time ranges which fail to provide the
requested accuracy on different HZ settings.
* Update documentation for all sleep/timeout related functions and fix
up stale documentation links all over the place
* Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as that's
the clock which drives the timekeeping adjustments via the various user
space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file descriptor
based posix clocks, but their usability is very limited. They can't be
accessed fast as they always go all the way out to the hardware and
they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the kernel
provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework converts
timekeeping and adjtimex(2) into generic functionality which operates
on pointers to data structures instead of using static variables.
This allows to provide time accessors and adjtimex(2) functionality for
the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less straight
forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the core
code and a few usage sites of the less frequently used interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is already
prepared and scheduled for the next merge window.
- Drivers:
* Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with other
clusters.
* Mostly boring cleanups, fixes, improvements and code movement
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmc7kPITHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoZKkD/9OUL6fOJrDUmOYBa4QVeMyfTef4EaL
tvwIMM/29XQFeiq3xxCIn+EMnHjXn2lvIhYGQ7GKsbKYwvJ7ZBDpQb+UMhZ2nKI9
6D6BP6WomZohKeH2fZbJQAdqOi3KRYdvQdIsVZUexkqiaVPphRvOH9wOr45gHtZM
EyMRSotPlQTDqcrbUejDMEO94GyjDCYXRsyATLxjmTzL/N4xD4NRIiotjM2vL/a9
8MuCgIhrKUEyYlFoOxxeokBsF3kk3/ez2jlG9b/N8VLH3SYIc2zgL58FBgWxlmgG
bY71nVG3nUgEjxBd2dcXAVVqvb+5widk8p6O7xxOAQKTLMcJ4H0tQDkMnzBtUzvB
DGAJDHAmAr0g+ja9O35Pkhunkh4HYFIbq0Il4d1HMKObhJV0JumcKuQVxrXycdm3
UZfq3seqHsZJQbPgCAhlFU0/2WWScocbee9bNebGT33KVwSp5FoVv89C/6Vjb+vV
Gusc3thqrQuMAZW5zV8g4UcBAA/xH4PB0I+vHib+9XPZ4UQ7/6xKl2jE0kd5hX7n
AAUeZvFNFqIsY+B6vz+Jx/yzyM7u5cuXq87pof5EHVFzv56lyTp4ToGcOGYRgKH5
JXeYV1OxGziSDrd5vbf9CzdWMzqMvTefXrHbWrjkjhNOe8E1A8O88RZ5uRKZhmSw
hZZ4hdM9+3T7cg==
=2VC6
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the
signal of the timer is ignored so that the timer signal can be
delivered once the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small
intervals and keeps the system pointlessly out of low power states
for no value. This is a long standing non-trivial problem due to
the lock order of posix-timer lock and the sighand lock along with
life time issues as the timer and the sigqueue have different life
time rules.
Cure this by:
- Embedding the sigqueue into the timer struct to have the same
life time rules. Aside of that this also avoids the lookup of
the timer in the signal delivery and rearm path as it's just a
always valid container_of() now.
- Queuing ignored timer signals onto a seperate ignored list.
- Moving queued timer signals onto the ignored list when the
signal is switched to SIG_IGN before it could be delivered.
- Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal
delivery code to rearm the timer.
This also required to consolidate the signal delivery rules so they
are consistent across all situations. With that all self test
scenarios finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time
stamps by default and switch to fine grained time stamps when inode
attributes are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that
the VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
- Move all sleep and timeout functions into one file
- Rework udelay() and ndelay() into proper documented inline
functions and replace the hardcoded magic numbers by proper
defines.
- Rework the fsleep() implementation to take the reality of the
timer wheel granularity on different HZ values into account.
Right now the boundaries are hard coded time ranges which fail
to provide the requested accuracy on different HZ settings.
- Update documentation for all sleep/timeout related functions
and fix up stale documentation links all over the place
- Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP
clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as
that's the clock which drives the timekeeping adjustments via the
various user space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file
descriptor based posix clocks, but their usability is very limited.
They can't be accessed fast as they always go all the way out to
the hardware and they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the
kernel provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework
converts timekeeping and adjtimex(2) into generic functionality
which operates on pointers to data structures instead of using
static variables.
This allows to provide time accessors and adjtimex(2) functionality
for the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less
straight forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the
core code and a few usage sites of the less frequently used
interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is
already prepared and scheduled for the next merge window.
- Drivers:
- Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with
other clusters.
- Mostly boring cleanups, fixes, improvements and code movement"
* tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits)
posix-timers: Fix spurious warning on double enqueue versus do_exit()
clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties
clocksource/drivers/gpx: Remove redundant casts
clocksource/drivers/timer-ti-dm: Fix child node refcount handling
dt-bindings: timer: actions,owl-timer: convert to YAML
clocksource/drivers/ralink: Add Ralink System Tick Counter driver
clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource
clocksource/drivers/timer-ti-dm: Don't fail probe if int not found
clocksource/drivers:sp804: Make user selectable
clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions
hrtimers: Delete hrtimer_init_on_stack()
alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack()
io_uring: Switch to use hrtimer_setup_on_stack()
sched/idle: Switch to use hrtimer_setup_on_stack()
hrtimers: Delete hrtimer_init_sleeper_on_stack()
wait: Switch to use hrtimer_setup_sleeper_on_stack()
timers: Switch to use hrtimer_setup_sleeper_on_stack()
net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack()
futex: Switch to use hrtimer_setup_sleeper_on_stack()
fs/aio: Switch to use hrtimer_setup_sleeper_on_stack()
...
This laptop model requires an additional detection quirk to enable the
internal microphone
Signed-off-by: Alex Far <anf1980@gmail.com>
Link: https://patch.msgid.link/ZzjrZY3sImcqTtGx@RedmiG
Signed-off-by: Mark Brown <broonie@kernel.org>
The ordering in hdmi_codec_get_ch_alloc_table_idx() results in
wrong channel allocation for a number of cases, e.g. when ELD
reports FL|FR|LFE|FC|RL|RR or FL|FR|LFE|FC|RL|RR|RC|RLC|RRC:
ca_id 0x01 with speaker mask FL|FR|LFE is selected instead of
ca_id 0x03 with speaker mask FL|FR|LFE|FC for 4 channels
and
ca_id 0x04 with speaker mask FL|FR|RC gets selected instead of
ca_id 0x0b with speaker mask FL|FR|LFE|FC|RL|RR for 6 channels
Fix this by reordering the channel allocation list with most
specific speaker masks at the top.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://patch.msgid.link/20241115044344.3510979-1-christianshewitt@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from "Hendrik v. Raven" <h.v.raven@merzmedtech.de>:
This series adds support for the idle-state property from the mux
framework to the simple-mux audio variant. It allows to specify the state
of the mux when it is not in use.
Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:
This patch series add SoundWire machines for RT711, RT714, RT1316 and
RT722 codecs for ACP 6.3 platform. Also, it adds a generic SoundWire
machine driver code for legacy(No DSP) stack.
Realtek Gen6 AIOC supports rt712_vb on SoundWire link 2 and rt1320 on
SoundWire link 1.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20241113064418.162592-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When firmware loading is disabled, gcc warns that the local
'fw' variable fails to get initialized:
sound/soc/codecs/sma1307.c: In function 'sma1307_setting_loaded.isra':
sound/soc/codecs/sma1307.c:1717:12: error: 'fw' is used uninitialized [-Werror=uninitialized]
1717 | if (!fw) {
| ^
sound/soc/codecs/sma1307.c:1712:32: note: 'fw' was declared here
1712 | const struct firmware *fw;
Check the return code from request_firmware() to ensure that the
firmware is correctly set, and drop the incorrect release_firmware()
on that uninitialized data.
Fixes: 576c57e6b4 ("ASoC: sma1307: Add driver for Iron Device SMA1307")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20241113175734.2443315-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
So far the mux changes it state immediately, even when not in use. Allow
overriding this behaviour by specifying an optional idle-state. This
state is used whenever the mux is powered down, only switching to the
selected state on power up. If unspecified it defaults to as-is,
maintaining the previous behaviour.
Signed-off-by: Hendrik v. Raven <h.v.raven@merzmedtech.de>
Link: https://patch.msgid.link/20241114-simple-mux-idle-state-v2-1-a30cb37d2be2@merzmedtech.de
Signed-off-by: Mark Brown <broonie@kernel.org>
sdca_lookup_functions may be called by a Peripheral that is not listed
in the ACPI table. Testing adev is required to avoid kernel NULL pointer
dereference.
Fixes: 3a513da1ae ("ASoC: SDCA: add initial module")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20241113064133.162501-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable ret is being assigned a zero value however the value is
never read because ret is being re-assigned later after the end of
the switch statement. The assignment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20241113130807.1386754-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixed PCM device numbering is required for defining common alsa ucm
changes for generic soundwire machine driver for legacy(No DSP) stack.
Ex: For Headphone playback use case, use PCM device number as 0.
For Headset mic Capture use case, PCM device number as 1.
Set the 'use_dai_pcm_id' flag true in soundwire dma driver for acp 6.3
platform. This will fix the pcm device numbering based on dai_link->id.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20241113115223.3274868-7-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
get_acp63_cpu_pin_id() is the common SoundWire machine driver
helper function will be used for AMD Legacy(No DSP) generic
SoundWire machine driver as well.
Move get_acp63_cpu_pin_id() function to common place holder.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20241113115223.3274868-5-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch add supports for corresponding codecs on acp6.3 platform
hardware configuration.
SDW0: RT711 Jack
SDW0: RT1316 Left Speaker
SDW0: RT1316 Right Speaker
SDW1: RT714 DMIC
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20241113115223.3274868-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The max9768 has a custom control for playback mute which unconditionally
returns 0 from the put() operation, rather than returning 1 on change to
ensure notifications are generated to userspace. Check to see if the value
has changed and return appropriately.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20241112-asoc-max9768-event-v1-1-ba5d50599787@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Simple Card Utils has simple_util_dai which is paired to snd_soc_dai,
and assmus that CPU/Codec DAI and its paired simple_util_dai are same
order for CPU/Codec
simple_util_dai[0] <--> snd_soc_dai[0]
simple_util_dai[1] <--> snd_soc_dai[1]
...
So, it is using same index in for_each loop.
(X) gets simple_util_dai
(Y) gets snd_soc_dai
(Y) for_each_rtd_cpu_dais(.., i, ..) {
(X)(A) udai = simple_props_to_dai_cpu(.., i);
}
(X) for_each_prop_dai_cpu(.., i, ...) {
(Y) dai = snd_soc_rtd_to_cpu(.., i);
...
}
But current Simple Card Utils didn't have simple_util_dai for
dummy DAI. So above (A) will get NULL pointer in such case.
This patch cares simple_util_dai for dummy DAI.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87msi5maz3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There's no reason to limit the supported rates of the test component
to specific ones as if it's a real piece of hardware. Set the rates to
continuous to aid in testing different rates.
Signed-off-by: John Watts <contact@jookia.org>
Link: https://patch.msgid.link/20241112-alsa_test_rates-v1-1-95cf529db871@jookia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix an issue detected by the Smatch tool:
sound/soc/sof/ipc4-pcm.c: sof_ipc4_pcm_dai_link_fixup_rate()
error: uninitialized symbol 'be_rate'.
The warning highlights a case where `be_rate` could remain uninitialized
if `num_input_formats` is zero, which would cause undefined behavior
when setting `rate->min` and `rate->max` based on `be_rate`.
To address this issue, a `WARN_ON_ONCE(!num_input_formats)` check was
added to ensure `num_input_formats` is greater than zero. If this
condition fails, the function returns `-EINVAL`, preventing the use of
an uninitialized `be_rate`.
This change improves the robustness of the function by catching an
invalid state early and providing better feedback during development.
Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com>
Link: https://patch.msgid.link/20241107063609.11627-1-surajsonawane0215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai has rate/channels/sample_bits parameter, but it is only valid
if symmetry is being enforced by symmetric_xxx flag on driver.
It is very difficult to know about it from current naming, and easy to
misunderstand it. add symmetric_ prefix for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87zfmd8bnf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This codec only has one set of left and right DACs, remove the duplicate
DACs with duplicated bits controlling them as the userspace can set those
controls to mismatched value. This most likely does break userspace ABI,
but there seem to be no in-kernel users.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/20241108235453.196289-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds a quirk to include the codec amplifier function for this
Dell SKU.
Note: In this SKU '0CF1', the RT722 codec amplifier is
excluded, and an external amplifier is used instead.
Signed-off-by: Deep Harsora <deep_harsora@dell.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241111070618.5414-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The audio graph card doesn't mark its subnodes such as multi {}, dpcm {}
and c2c {} as not requiring any suppliers. This causes a hang as Linux
waits for these phantom suppliers to show up on boot.
Make it clear these nodes have no suppliers.
Example error message:
[ 15.208558] platform 2034000.i2s: deferred probe pending: platform: wait for supplier /sound/multi
[ 15.208584] platform sound: deferred probe pending: asoc-audio-graph-card2: parse error
Signed-off-by: John Watts <contact@jookia.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20241108-graph_dt_fix-v1-1-173e2f9603d6@jookia.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Hi,
A recent attempt to fix a missing symbol when
CONFIG_SND_SOC_SDCA=m and CONFIG_SND_SOC_ACPI_INTEL_SDCA_QUIRKS=y
caused unmet direct dependency warning with randconig.
The reason is that SND_SOC_ACPI_INTEL_MATCH is needed to be compilable
even if ACPI is not selected, modules have dependency on exported
symbols from it.
The only solution for these kconfig dependencies seams to be to
only select SND_SOC_SDCA if ACPI is enabled from
SND_SOC_ACPI_INTEL_SDCA_QUIRKS.
Regards,
Peter
---
Peter Ujfalusi (2):
ASoC: Intel: Kconfig: Only select SND_SOC_SDCA if ACPI is enabled
ASoC: Intel: Kconfig: Revert make SND_SOC_ACPI_INTEL_MATCH depend on
ACPI
sound/soc/intel/Kconfig | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--
2.47.0
Add handling of clock related to secondary MI2S_RX in
sm8250_snd_startup().
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://patch.msgid.link/20241018025452.1362293-2-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
