Its possible that the sound card is just opened and closed without actually
playing stream, ex: if the audio file itself is missing.
Even in such cases we do call stop on graphs that are not yet started.
DSP can throw errors in such cases, so add a check to see if the graph
was started before stopping it.
Fixes: 9b4fe0f1cd ("ASoC: qdsp6: audioreach: add q6apm-dai support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220126113549.8853-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
wcd938x_ear_pa_put_gain, wcd938x_set_swr_port and wcd938x_set_compander
currently returns zero eventhough it changes the value.
Fix this, so that change notifications are sent correctly.
Fixes: e8ba1e05bd ("ASoC: codecs: wcd938x: add basic controls")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220126113549.8853-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason we ended up with incorrect register offfset calcuations
for sidetone. regmap clearly throw errors when accessing these incorrect
registers as these do not belong to any read/write ranges.
so fix them to point to correct register offsets.
Fixes: f3ce6f3c9a ("ASoC: codecs: lpass-rx-macro: add iir widgets")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220126113549.8853-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Mixer controls have the channel id in mixer->reg, which is not same
as port id. port id should be derived from chan_info array.
So fix this. Without this, its possible that we could corrupt
struct wcd938x_sdw_priv by accessing port_map array out of range
with channel id instead of port id.
Fixes: e8ba1e05bd ("ASoC: codecs: wcd938x: add basic controls")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220126113549.8853-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
GPIO7_IO00 is used as SD card detect.
Properly describe this in the devicetree.
Fixes: 40cdaa542c ("ARM: dts: imx6q-udoo: Add initial board support")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
CDNSP driver read not initialized cdns->otg_v0_regs
which lead to segmentation fault. Patch fixes this issue.
Fixes: 2cf2581cd2 ("usb: cdns3: add power lost support for system resume")
cc: <stable@vger.kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20220111090737.10345-1-pawell@gli-login.cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In uniphier_spi_remove(), there is a wrong code to get private data from
the platform device, so the driver can't be removed properly.
The driver should get spi_master from the platform device and retrieve
the private data from it.
Cc: <stable@vger.kernel.org>
Fixes: 5ba155a4d4 ("spi: add SPI controller driver for UniPhier SoC")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1640148492-32178-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The corresponding API for clk_prepare is clk_unprepare, other than
clk_disable_unprepare.
Fix this by changing clk_disable_unprepare to clk_unprepare.
Fixes: 5762ab71eb ("spi: Add support for Armada 3700 SPI Controller")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Link: https://lore.kernel.org/r/20211206101931.2816597-1-mudongliangabcd@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Calling dwc2_hsotg_ep_disable on ep0 (in/out) will lead to the following
logs before returning -EINVAL:
dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called for ep0
dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called for ep0
To avoid these two logs while suspending, start disabling the endpoint
from the index 1, as done in dwc2_hsotg_udc_stop:
/* all endpoints should be shutdown */
for (ep = 1; ep < hsotg->num_of_eps; ep++) {
if (hsotg->eps_in[ep])
dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep);
if (hsotg->eps_out[ep])
dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep);
}
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211207130101.270314-1-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a build error observed with ARCH=arm DEFCONFIG=allmodconfig build.
drivers/usb/gadget/udc/at91_udc.h:174:42: error: format '%d' expects argument of type 'int', but argument 3 has type 'struct gpio_desc *' [-Werror=format=]
Fixes: 4a555f2b8d ("usb: gadget: at91_udc: Convert to GPIO descriptors")
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220119020849.25732-1-miles.chen@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code that looked up the USB3 PHY was ignoring all errors other than
EPROBE_DEFER in an attempt to handle the PHY not being present. Fix and
simplify the code by using devm_phy_optional_get and dev_err_probe so
that a missing PHY is not treated as an error and unexpected errors
are handled properly.
Fixes: 84770f028f ("usb: dwc3: Add driver for Xilinx platforms")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220126000253.1586760-3-robert.hancock@calian.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It appears that the PIPE clock should not be selected when only USB 2.0
is being used in the design and no USB 3.0 reference clock is used.
Also, the core resets are not required if a USB3 PHY is not in use, and
will break things if USB3 is actually used but the PHY entry is not
listed in the device tree.
Skip core resets and register settings that are only required for
USB3 mode when no USB3 PHY is specified in the device tree.
Fixes: 84770f028f ("usb: dwc3: Add driver for Xilinx platforms")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220126000253.1586760-2-robert.hancock@calian.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 7495af9308 ("ARM: multi_v7_defconfig: Enable drivers for
DragonBoard 410c") enables the CONFIG_PHY_QCOM_USB_HS for the ARM
multi_v7_defconfig. Enabling this Kconfig is causing the kernel to crash
on the Tegra20 Ventana platform in the ulpi_match() function.
The Qualcomm USB HS PHY driver that is enabled by CONFIG_PHY_QCOM_USB_HS,
registers a ulpi_driver but this driver does not provide an 'id_table',
so when ulpi_match() is called on the Tegra20 Ventana platform, it
crashes when attempting to deference the id_table pointer which is not
valid. The Qualcomm USB HS PHY driver uses device-tree for matching the
ULPI driver with the device and so fix this crash by using device-tree
for matching if the id_table is not valid.
Fixes: ef6a7bcfb0 ("usb: ulpi: Support device discovery via DT")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20220117150039.44058-1-jonathanh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently when gadget enumerates in super speed plus, the isoc
endpoint request buffer size is not calculated correctly. Fix
this by checking the gadget speed against USB_SPEED_SUPER_PLUS
and update the request buffer size.
Fixes: 90c4d05780 ("usb: fix various gadgets null ptr deref on 10gbps cabling.")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Link: https://lore.kernel.org/r/1642820602-20619-1-git-send-email-quic_pkondeti@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CCGx clears Bit 0:Device Interrupt in the INTR_REG
if CCGx is reset successfully. However, there might
be a chance that other bits in INTR_REG are not
cleared due to internal data queued in PPM. This case
misleads the driver that CCGx reset failed.
The commit checks bit 0 in INTR_REG and ignores other
bits. The ucsi driver would reset PPM later.
Fixes: 247c554a14 ("usb: typec: ucsi: add support for Cypress CCGx")
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Sing-Han Chen <singhanc@nvidia.com>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Link: https://lore.kernel.org/r/20220112094143.628610-1-waynec@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 99aa29932271 ("arm64: dts: imx8mn: Enable GPU")
imx8mn-venice-gw7902 will hang during kernel init because it uses
a MIMX8MN5CVTI which does not have a GPU.
Disable pgc_gpumix to work around this. We also disable the GPU devices
that depend on the gpumix power domain and pgc_gpu to avoid them staying
in a probe deferred state forever.
Cc: Adam Ford <aford173@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Fixes: 99aa29932271 ("arm64: dts: imx8mn: Enable GPU")
Reviewed-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
A recent bug report outlined that the way GICv4.1 is handled across
kexec is pretty bad. We can end-up in a situation where ITSs share
memory (this is the case when SVPET==1) and reprogram the base
registers, creating a situation where ITSs that are part of a given
affinity group see different pointers. Which is illegal. Boo.
In order to restore some sanity, reset the BASERn registers to 0
*before* probing any ITS. Although this isn't optimised at all,
this is only a once-per-boot cost, which shouldn't show up on
anyone's radar.
Cc: Jay Chen <jkchen@linux.alibaba.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20211216190315.GA14220@lpieralisi
Link: https://lore.kernel.org/r/20220124133809.1291195-1-maz@kernel.org
Although it is painstakingly honest to describe all 3 PCI windows in
"dma-ranges", it misses the the subtle distinction that the window for
the GICv2m range is normally programmed for Device memory attributes
rather than Normal Cacheable like the DRAM windows. Since MMU-401 only
offers stage 2 translation, this means that when the PCI SMMU is
enabled, accesses through that IPA range unexpectedly lose coherency if
mapped as cacheable at the SMMU, due to the attribute combining rules.
Since an extra 256KB is neither here nor there when we still have 10GB
worth of usable address space, rather than attempting to describe and
cope with this detail let's just remove the offending range. If the SMMU
is not used then it makes no difference anyway.
Link: https://lore.kernel.org/r/856c3f7192c6c3ce545ba67462f2ce9c86ed6b0c.1643046936.git.robin.murphy@arm.com
Fixes: 4ac4d146cb ("arm64: dts: juno: Describe PCI dma-ranges")
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
xfrm_migrate cannot handle address family change of an xfrm_state.
The symptons are the xfrm_state will be migrated to a wrong address,
and sending as well as receiving packets wil be broken.
This commit fixes it by breaking the original xfrm_state_clone
method into two steps so as to update the props.family before
running xfrm_init_state. As the result, xfrm_state's inner mode,
outer mode, type and IP header length in xfrm_state_migrate can
be updated with the new address family.
Tested with additions to Android's kernel unit test suite:
https://android-review.googlesource.com/c/kernel/tests/+/1885354
Signed-off-by: Yan Yan <evitayan@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch enables distinguishing SAs and SPs based on if_id during
the xfrm_migrate flow. This ensures support for xfrm interfaces
throughout the SA/SP lifecycle.
When there are multiple existing SPs with the same direction,
the same xfrm_selector and different endpoint addresses,
xfrm_migrate might fail with ENODATA.
Specifically, the code path for performing xfrm_migrate is:
Stage 1: find policy to migrate with
xfrm_migrate_policy_find(sel, dir, type, net)
Stage 2: find and update state(s) with
xfrm_migrate_state_find(mp, net)
Stage 3: update endpoint address(es) of template(s) with
xfrm_policy_migrate(pol, m, num_migrate)
Currently "Stage 1" always returns the first xfrm_policy that
matches, and "Stage 3" looks for the xfrm_tmpl that matches the
old endpoint address. Thus if there are multiple xfrm_policy
with same selector, direction, type and net, "Stage 1" might
rertun a wrong xfrm_policy and "Stage 3" will fail with ENODATA
because it cannot find a xfrm_tmpl with the matching endpoint
address.
The fix is to allow userspace to pass an if_id and add if_id
to the matching rule in Stage 1 and Stage 2 since if_id is a
unique ID for xfrm_policy and xfrm_state. For compatibility,
if_id will only be checked if the attribute is set.
Tested with additions to Android's kernel unit test suite:
https://android-review.googlesource.com/c/kernel/tests/+/1668886
Signed-off-by: Yan Yan <evitayan@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The current implementation of HTB offload doesn't support some
parameters. Instead of ignoring them, actively return the EINVAL error
when they are set to non-defaults.
As this patch goes to stable, the driver API is not changed here. If
future drivers support more offload parameters, the checks can be moved
to the driver side.
Note that the buffer and cbuffer parameters are also not supported, but
the tc userspace tool assigns some default values derived from rate and
ceil, and identifying these defaults in sch_htb would be unreliable, so
they are still ignored.
Fixes: d03b195b5a ("sch_htb: Hierarchical QoS hardware offload")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20220125100654.424570-1-maximmi@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The lirc.h file is an old copy of lirc.h from the kernel sources. It is
out of date, and the bpf lirc tests don't need a new copy anyway. As
long as /usr/include/linux/lirc.h is from kernel v5.2 or newer, the tests
will compile fine.
Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220124153028.394409-1-sean@mess.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It seems inc_misses_counter() suffers from same issue fixed in
the commit d979617aa8 ("bpf: Fixes possible race in update_prog_stats()
for 32bit arches"):
As it can run while interrupts are enabled, it could
be re-entered and the u64_stats syncp could be mangled.
Fixes: 9ed9e9ba23 ("bpf: Count the number of times recursion was prevented")
Signed-off-by: He Fengqing <hefengqing@huawei.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20220122102936.1219518-1-hefengqing@huawei.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Function pcie_rmw() is not being used at all and can be deleted. Hence get
rid of it, which fixes this warning:
drivers/pci/controller/pcie-mt7621.c:112:20: warning: unused function 'pcie_rmw' [-Wunused-function]
Fixes: 2bdd5238e7 ("PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver")
Link: https://lore.kernel.org/r/20220124113003.406224-3-sergio.paracuellos@gmail.com
Link: https://lore.kernel.org/all/202201241754.igtHzgHv-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
We have stubs for most OF interfaces even when CONFIG_OF is not set, so we
allow building of pcie-mt7621.c in that case for compile testing.
When CONFIG_OF is not set, "of_match_ptr(mt7621_pcie_ids)" compiles to
NULL, which leaves mt7621_pcie_ids unused:
$ make W=1
drivers/pci/controller/pcie-mt7621.c:549:34: warning: unused variable 'mt7621_pcie_ids' [-Wunused-const-variable]
Drop of_match_ptr() to avoid the unused variable warning.
[bhelgaas: commit log]
Fixes: 2bdd5238e7 ("PCI: mt7621: Add MediaTek MT7621 PCIe host controller driver")
Link: https://lore.kernel.org/r/20220124113003.406224-2-sergio.paracuellos@gmail.com
Link: https://lore.kernel.org/r/202201241754.igtHzgHv-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Unused. Convert the divisions into asserts on the divisor, to
debug why it is zero. The divide by zero is suspected of causing
kernel panics.
While I have no idea where the zero is coming from I think this
patch is a positive either way.
Cc: stable@vger.kernel.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mirrors the logic for dcn30. Cue lots of WARNs and some
kernel panics without this fix.
Cc: stable@vger.kernel.org
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It calls populate_dml_pipes which uses doubles to initialize the
scale_ratio_depth params. Mirrors the dcn20 logic.
Cc: stable@vger.kernel.org
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In calculate_bandwidth(), the tag free_sclk and free_yclk are reversed,
which could lead to a memory leak of yclk.
Fix this bug by changing the location of free_sclk and free_yclk.
This bug was found by a static analyzer.
Builds with 'make allyesconfig' show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 2be8989d0f ("drm/amd/display/dc/calcs/dce_calcs: Move some large variables from the stack to the heap")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some architectures (e.g., ARM) throw an compilation error if the
udelay is too long. In general udelays of longer than 2000us are
not recommended on any architecture. Switch to msleep in these
cases.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some architectures (e.g., ARM) have relatively low udelay limits.
On most architectures, anything longer than 2000us is not recommended.
Change the check to align with other similar checks in DC.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Older radeon boards (r2xx-r5xx) had secondary PCI functions
which we solely there for supporting multi-head on OSs with
special requirements. Add them to the unsupported list
as well so we don't attempt to bind to them. The driver
would fail to bind to them anyway, but this does so
in a cleaner way that should not confuse the user.
Cc: stable@vger.kernel.org
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
FIFO reset is only necessary for fast boot sequence, where otg is disabled
and dig fe is enabled when changing dispclk. Fast boot is only enabled
on embedded displays.
[How]
Change FIFO reset condition to "embedded display only".
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN301 has seamless boot enabled. With MPC split enabled
at the same time, system will hang.
[How]
Revert MPC split policy back to "MPC_SPLIT_AVOID". Since we have
ODM combine enabled on DCN301, pipe split is not necessary here.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During otg sync trigger, plane states are used to decide whether the otg
is already synchronized or not. There are scenarions when otgs are
disabled without plane state getting disabled and in such case the otg is
excluded from synchronization.
[How]
Introduced pipe_idx_syncd in pipe_ctx that tracks each otgs master pipe.
When a otg is disabled/enabled, pipe_idx_syncd is reset to itself.
On sync trigger, pipe_idx_syncd is checked to decide whether a otg is
already synchronized and the otg is further included or excluded from
synchronization.
v2:
Don't drop is_blanked logic
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Mustapha Ghaddar <mustapha.ghaddar@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: meenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: torvalds@linux-foundation.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The membarrier command MEMBARRIER_CMD_QUERY allows querying the
available membarrier commands. When the membarrier-rseq fence commands
were added, a new MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ_BITMASK was
introduced with the intent to expose them with the MEMBARRIER_CMD_QUERY
command, the but it was never added to MEMBARRIER_CMD_BITMASK.
The membarrier-rseq fence commands are therefore not wired up with the
query command.
Rename MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ_BITMASK to
MEMBARRIER_PRIVATE_EXPEDITED_RSEQ_BITMASK (the bitmask is not a command
per-se), and change the erroneous
MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_RSEQ_BITMASK (which does not
actually exist) to MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_RSEQ.
Wire up MEMBARRIER_PRIVATE_EXPEDITED_RSEQ_BITMASK in
MEMBARRIER_CMD_BITMASK. Fixing this allows discovering availability of
the membarrier-rseq fence feature.
Fixes: 2a36ab717e ("rseq/membarrier: Add MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org> # 5.10+
Link: https://lkml.kernel.org/r/20220117203010.30129-1-mathieu.desnoyers@efficios.com
We have some many cases that will create child process as well, such as
pidfd_wait. Previously, we will signal/kill the parent process when it
is time out, but this signal will not be sent to its child process. In
such case, if child process doesn't terminate itself, ksefltest framework
will hang forever.
Here we group all its child processes so that kill() can signal all of
them in timeout.
Fixed change log: Shuah Khan <skhan@linuxfoundation.org>
Suggested-by: yang xu <xuyang2018.jy@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use 'tee' to send the test output to stdout in addition to the current
output file. This makes the output easier to handle in automated test
systems and is superior to only later dumping the output file contents
to stdout, since this way the test output can be interleaved with other
log messages, like from the kernel, so that chronology is preserved,
making it easier to detect issues.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The timeout setting for the rtc kselftest is currently 90 seconds. This
setting is used by the kselftest runner to stop running a test if it
takes longer than the assigned value.
However, two of the test cases inside rtc set alarms. These alarms are
set to the next beginning of the minute, so each of these test cases may
take up to, in the worst case, 60 seconds.
In order to allow for all test cases in rtc to run, even in the worst
case, when using the kselftest runner, the timeout value should be
increased to at least 120. Set it to 180, so there's some additional
slack.
Correct operation can be tested by running the following command right
after the start of a minute (low second count), and checking that all
test cases run:
./run_kselftest.sh -c rtc
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Python 3.10.0 contains:
9e09849d20 ("bpo-41006: importlib.util no longer imports typing (GH-20938)")
It causes importlib.util to no longer import importlib.abs, which leads
to the following error when trying to use kunit with qemu:
AttributeError: module 'importlib' has no attribute 'abc'. Did you mean: '_abc'?
Add the missing import.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When an admin enables audit at early boot via the "audit=1" kernel
command line the audit queue behavior is slightly different; the
audit subsystem goes to greater lengths to avoid dropping records,
which unfortunately can result in problems when the audit daemon is
forcibly stopped for an extended period of time.
This patch makes a number of changes designed to improve the audit
queuing behavior so that leaving the audit daemon in a stopped state
for an extended period does not cause a significant impact to the
system.
- kauditd_send_queue() is now limited to looping through the
passed queue only once per call. This not only prevents the
function from looping indefinitely when records are returned
to the current queue, it also allows any recovery handling in
kauditd_thread() to take place when kauditd_send_queue()
returns.
- Transient netlink send errors seen as -EAGAIN now cause the
record to be returned to the retry queue instead of going to
the hold queue. The intention of the hold queue is to store,
perhaps for an extended period of time, the events which led
up to the audit daemon going offline. The retry queue remains
a temporary queue intended to protect against transient issues
between the kernel and the audit daemon.
- The retry queue is now limited by the audit_backlog_limit
setting, the same as the other queues. This allows admins
to bound the size of all of the audit queues on the system.
- kauditd_rehold_skb() now returns records to the end of the
hold queue to ensure ordering is preserved in the face of
recent changes to kauditd_send_queue().
Cc: stable@vger.kernel.org
Fixes: 5b52330bbf ("audit: fix auditd/kernel connection state tracking")
Fixes: f4b3ee3c85 ("audit: improve robustness of the audit queue handling")
Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
- New Features:
- Basic handling for case insensitive filesystems
- Initial support for fs_locations and server trunking
- Bugfixes and Cleanups:
- Cleanups to how the "struct cred *" is handled for the nfs_access_entry
- Ensure the server has an up to date ctimes before hardlinking or renaming
- Update 'blocks used' after writeback, fallocate, and clone
- nfs_atomic_open() fixes
- Improvements to sunrpc tracing
- Various null check & indenting related cleanups
- Some improvements to the sunrpc sysfs code
- Use default_groups in kobj_type
- Fix some potential races and reference leaks
- A few tracepoint cleanups in xprtrdma
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEnZ5MQTpR7cLU7KEp18tUv7ClQOsFAmHodsIACgkQ18tUv7Cl
QOt3xQ//c9JPmMJZZoZtaD5UrHg28iyxaJpOUUpwC/jxQhLOETCf+nU1cELYgLq5
4W06NBYEmjDJ/tihUvcGMKLvbCtQR9Zl9HepFKDTLTQpGmRFD4enwSmMNvW/AV+h
I7PoN6J1DX/TZ5InOHH9asyoC2MjwrNHMn3bbQVT0qy+i3T76zJiBF79eWTnPR48
kKPnF1I0p4LKGJy+y+y/z2mdCsz7tzFkhssxVhot0nafxXzbUOp1H9aiwxroRiUC
ljbBA0TX8FWkGpGFt3y2QK2fMD7ovDpRhLFYiJClmeERXJVH5mXL9O5XfN5AL0xe
W/QqT5lbWfeHLkpm2j87yTyaHASC7hGKsAyPD0zWLDcNZws61l1Sy4BHymSE5ZVh
zt7sJjBnOWAtntyUGBg78G2vhBsd63GzrtcqAOlrngwA5ohJ8f32qvBQGyw4MQu9
75CjRcO8K8mnf9BJ6I1vYPycjkUh9RSFfNdnUEAI9ZwiTEC/hfEvH/omvEtZsNol
jBgv2SItTkdMZlEppEL4gxuaYT2wiZf2C6Gco215iPAqLC6dudoroN6yoLk/LRd0
OWZLl5XTr3j6m5QDm22k5CG080vl6XiAxmAFaFSLza6Q34Jmuluc0gLAZZxvqXk9
Ay7dQt9PQQk6mXD5Hreb0E5N9zcm2LkfvWpyGJ7mTV7sSHjA2DU=
=wcVT
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.17-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Basic handling for case insensitive filesystems
- Initial support for fs_locations and server trunking
Bugfixes and Cleanups:
- Cleanups to how the "struct cred *" is handled for the
nfs_access_entry
- Ensure the server has an up to date ctimes before hardlinking or
renaming
- Update 'blocks used' after writeback, fallocate, and clone
- nfs_atomic_open() fixes
- Improvements to sunrpc tracing
- Various null check & indenting related cleanups
- Some improvements to the sunrpc sysfs code:
- Use default_groups in kobj_type
- Fix some potential races and reference leaks
- A few tracepoint cleanups in xprtrdma"
[ This should have gone in during the merge window, but didn't. The
original pull request - sent during the merge window - had gotten
marked as spam and discarded due missing DKIM headers in the email
from Anna. - Linus ]
* tag 'nfs-for-5.17-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (35 commits)
SUNRPC: Don't dereference xprt->snd_task if it's a cookie
xprtrdma: Remove definitions of RPCDBG_FACILITY
xprtrdma: Remove final dprintk call sites from xprtrdma
sunrpc: Fix potential race conditions in rpc_sysfs_xprt_state_change()
net/sunrpc: fix reference count leaks in rpc_sysfs_xprt_state_change
NFSv4.1 test and add 4.1 trunking transport
SUNRPC allow for unspecified transport time in rpc_clnt_add_xprt
NFSv4 handle port presence in fs_location server string
NFSv4 expose nfs_parse_server_name function
NFSv4.1 query for fs_location attr on a new file system
NFSv4 store server support for fs_location attribute
NFSv4 remove zero number of fs_locations entries error check
NFSv4: nfs_atomic_open() can race when looking up a non-regular file
NFSv4: Handle case where the lookup of a directory fails
NFSv42: Fallocate and clone should also request 'blocks used'
NFSv4: Allow writebacks to request 'blocks used'
SUNRPC: use default_groups in kobj_type
NFS: use default_groups in kobj_type
NFS: Fix the verifier for case sensitive filesystem in nfs_atomic_open()
NFS: Add a helper to remove case-insensitive aliases
...
We need to flush TLBs before releasing backing store otherwise userspace
is able to encounter stale entries if a) it is not declaring access to
certain buffers and b) it races with the backing store release from a
such undeclared execution already executing on the GPU in parallel.
The approach taken is to mark any buffer objects which were ever bound
to the GPU and to trigger a serialized TLB flush when their backing
store is released.
Alternatively the flushing could be done on VMA unbind, at which point
we would be able to ascertain whether there is potential a parallel GPU
execution (which could race), but essentially it boils down to paying
the cost of TLB flushes potentially needlessly at VMA unbind time (when
the backing store is not known to be going away so not needed for
safety), versus potentially needlessly at backing store relase time
(since we at that point cannot tell whether there is anything executing
on the GPU which uses that object).
Thereforce simplicity of implementation has been chosen for now with
scope to benchmark and refine later as required.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While all userspace tried to limit commandstreams to 64K in size,
a bug in the Mesa driver lead to command streams of up to 128K
being submitted. Allow those to avoid breaking existing userspace.
Fixes: 6dfa2fab8d ("drm/etnaviv: limit submit sizes")
Cc: stable@vger.kernel.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
The syzbot fuzzer has identified a bug in which processes hang waiting
for usb_kill_urb() to return. It turns out the issue is not unlinking
the URB; that works just fine. Rather, the problem arises when the
wakeup notification that the URB has completed is not received.
The reason is memory-access ordering on SMP systems. In outline form,
usb_kill_urb() and __usb_hcd_giveback_urb() operating concurrently on
different CPUs perform the following actions:
CPU 0 CPU 1
---------------------------- ---------------------------------
usb_kill_urb(): __usb_hcd_giveback_urb():
... ...
atomic_inc(&urb->reject); atomic_dec(&urb->use_count);
... ...
wait_event(usb_kill_urb_queue,
atomic_read(&urb->use_count) == 0);
if (atomic_read(&urb->reject))
wake_up(&usb_kill_urb_queue);
Confining your attention to urb->reject and urb->use_count, you can
see that the overall pattern of accesses on CPU 0 is:
write urb->reject, then read urb->use_count;
whereas the overall pattern of accesses on CPU 1 is:
write urb->use_count, then read urb->reject.
This pattern is referred to in memory-model circles as SB (for "Store
Buffering"), and it is well known that without suitable enforcement of
the desired order of accesses -- in the form of memory barriers -- it
is entirely possible for one or both CPUs to execute their reads ahead
of their writes. The end result will be that sometimes CPU 0 sees the
old un-decremented value of urb->use_count while CPU 1 sees the old
un-incremented value of urb->reject. Consequently CPU 0 ends up on
the wait queue and never gets woken up, leading to the observed hang
in usb_kill_urb().
The same pattern of accesses occurs in usb_poison_urb() and the
failure pathway of usb_hcd_submit_urb().
The problem is fixed by adding suitable memory barriers. To provide
proper memory-access ordering in the SB pattern, a full barrier is
required on both CPUs. The atomic_inc() and atomic_dec() accesses
themselves don't provide any memory ordering, but since they are
present, we can use the optimized smp_mb__after_atomic() memory
barrier in the various routines to obtain the desired effect.
This patch adds the necessary memory barriers.
CC: <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+76629376e06e2c2ad626@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/Ye8K0QYee0Q0Nna2@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Two people have reported (and mentioned numerous other reports on the
web) that VIA's VL817 USB-SATA bridge does not work with the uas
driver. Typical log messages are:
[ 3606.232149] sd 14:0:0:0: [sdg] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD
[ 3606.232154] sd 14:0:0:0: [sdg] tag#2 CDB: Write(16) 8a 00 00 00 00 00 18 0c c9 80 00 00 00 80 00 00
[ 3606.306257] usb 4-4.4: reset SuperSpeed Plus Gen 2x1 USB device number 11 using xhci_hcd
[ 3606.328584] scsi host14: uas_eh_device_reset_handler success
Surprisingly, the devices do seem to work okay for some other people.
The cause of the differing behaviors is not known.
In the hope of getting the devices to work for the most users, even at
the possible cost of degraded performance for some, this patch adds an
unusual_devs entry for the VL817 to block it from binding to the uas
driver by default. Users will be able to override this entry by means
of a module parameter, if they want.
CC: <stable@vger.kernel.org>
Reported-by: DocMAX <mail@vacharakis.de>
Reported-and-tested-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/Ye8IsK2sjlEv1rqU@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
