The newly introduced mutex is only used for reformat actions, but it was
initialized for modify header instead.
The struct that contains the mutex is zero-initialized and an all-zero
mutex is valid, so the issue only shows up with CONFIG_DEBUG_MUTEXES.
Fixes: b206d9ec19 ("net/mlx5: HWS, register reformat actions with fw")
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When attempting to add a rule to an existing flow group, if a matching
flow group exists but is not active, the error code returned should be
EAGAIN, so that the rule can be added to the matching flow group once
it is active, rather than ENOENT, which indicates that no matching
flow group was found.
Fixes: bd71b08ec2 ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: Gavi Teitz <gavi@nvidia.com>
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When firmware asks the driver to allocate more pages, using event of
give_pages, the driver should always allocate it from same NUMA, the
original device NUMA. Current code uses dev_to_node() which can result
in different NUMA as it is changed by other driver flows, such as
mlx5_dma_zalloc_coherent_node(). Instead, use saved numa node for
allocating firmware pages.
Fixes: 311c7c71c9 ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250610151514.1094735-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-06-10 (i40e, iavf, ice, e1000)
For i40e:
Robert Malz improves reset handling for situations where multiple reset
requests could cause some to be missed.
For iavf:
Ahmed adds detection, and handling, of reset that could occur early in
the initialization process to stop long wait/hangs.
For ice:
Anton, properly, sets missed use_nsecs value.
For e1000:
Joe Damato moves cancel_work_sync() call to avoid deadlock.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000: Move cancel_work_sync to avoid deadlock
ice/ptp: fix crosstimestamp reporting
iavf: fix reset_task for early reset event
i40e: retry VFLR handling if there is ongoing VF reset
i40e: return false from i40e_reset_vf if reset is in progress
====================
Link: https://patch.msgid.link/20250610171348.1476574-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently bc_sid is being ignore when acting as Broadcast Source role,
so this fix it by passing the bc_sid and then use it when programming
the PA:
< HCI Command: LE Set Exte.. (0x08|0x0036) plen 25
Handle: 0x01
Properties: 0x0000
Min advertising interval: 140.000 msec (0x00e0)
Max advertising interval: 140.000 msec (0x00e0)
Channel map: 37, 38, 39 (0x07)
Own address type: Random (0x01)
Peer address type: Public (0x00)
Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
TX power: Host has no preference (0x7f)
Primary PHY: LE 1M (0x01)
Secondary max skip: 0x00
Secondary PHY: LE 2M (0x02)
SID: 0x01
Scan request notifications: Disabled (0x00)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BT_SK_PA_SYNC is only valid for Broadcast Sinks which means socket used
for Broadcast Sources wouldn't be able to use the likes of getpeername
to read out the sockaddr_iso_bc fields which may have been update (e.g.
bc_sid).
Fixes: 0a766a0aff ("Bluetooth: ISO: Fix getpeername not returning sockaddr_iso_bc fields")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
eir_create_adv_data may attempt to add EIR_FLAGS and EIR_TX_POWER
without checking if that would fit.
Link: https://github.com/bluez/bluez/issues/1117#issuecomment-2958244066
Fixes: 01ce70b0a2 ("Bluetooth: eir: Move EIR/Adv Data functions to its own file")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When using and existing adv_info instance for broadcast source it
needs to be updated to periodic first before it can be reused, also in
case the existing instance already have data hci_set_adv_instance_data
cannot be used directly since it would overwrite the existing data so
this reappend the original data after the Broadcast ID, if one was
generated.
Example:
bluetoothctl># Add PBP to EA so it can be later referenced as the BIS ID
bluetoothctl> advertise.service 0x1856 0x00 0x00
bluetoothctl> advertise on
...
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 13
Handle: 0x01
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x09
Service Data: Public Broadcast Announcement (0x1856)
Data[2]: 0000
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
...
bluetoothctl># Attempt to acquire Broadcast Source transport
bluetoothctl>transport.acquire /org/bluez/hci0/pac_bcast0/fd0
...
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 255
Handle: 0x01
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x0e
Service Data: Broadcast Audio Announcement (0x1852)
Broadcast ID: 11371620 (0xad8464)
Service Data: Public Broadcast Announcement (0x1856)
Data[2]: 0000
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
Link: https://github.com/bluez/bluez/issues/1117
Fixes: eca0ae4aea ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The len parameter is considered optional so it can be NULL so it cannot
be used for skipping to next entry of EIR_SERVICE_DATA.
Fixes: 8f9ae5b3ae ("Bluetooth: eir: Add helpers for managing service data")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Invert the FINAL_PUT bit so that test_bit_acquire and clear_bit_unlock
can be used instead of smp_mb.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During platform init, SNP initialization may fail for several reasons,
such as firmware command failures and incompatible versions. However,
the KVM capability may continue to advertise support for it.
The platform may have SNP enabled but if SNP_INIT fails then SNP is
not supported by KVM.
During KVM module initialization query the SNP platform status to obtain
the SNP initialization state and use it as an additional condition to
determine support for SEV-SNP.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Pratik R. Sampat <prsampat@amd.com>
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Reviewed-by: Pavan Kumar Paluri <papaluri@amd.com>
Message-ID: <20250512221634.12045-1-Ashish.Kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Rework of system register accessors for system registers that are
directly writen to memory, so that sanitisation of the in-memory
value happens at the correct time (after the read, or before the
write). For convenience, RMW-style accessors are also provided.
- Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
which was always broken.
-----BEGIN PGP SIGNATURE-----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=OMHL
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.16, take #2
- Rework of system register accessors for system registers that are
directly writen to memory, so that sanitisation of the in-memory
value happens at the correct time (after the read, or before the
write). For convenience, RMW-style accessors are also provided.
- Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
which was always broken.
If reset_control_acquire() fails, then we can't return directly.
We need to do a little clean up first.
Fixes: cf2c3eceb7 ("spi: stm32-ospi: Make usage of reset_control_acquire/release() API")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aEmAGTUzzKZlLe3K@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously, the block layer stored the requests in the plug list in
LIFO order. For this reason, blk_attempt_plug_merge() would check
just the head entry for a back merge attempt, and abort after that
unless requests for multiple queues existed in the plug list. If more
than one request is present in the plug list, this makes the one-shot
back merging less useful than before, as it'll always fail to find a
quick merge candidate.
Use the tail entry for the one-shot merge attempt, which is the last
added request in the list. If that fails, abort immediately unless
there are multiple queues available. If multiple queues are available,
then scan the list. Ideally the latter scan would be a backwards scan
of the list, but as it currently stands, the plug list is singly linked
and hence this isn't easily feasible.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-block/20250611121626.7252-1-abuehaze@amazon.com/
Reported-by: Hazem Mohamed Abuelfotoh <abuehaze@amazon.com>
Fixes: e70c301fae ("block: don't reorder requests in blk_add_rq_to_plug")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bios queued up in the zone write plug have already gone through all all
preparation in the submit_bio path, including the freeze protection.
Submitting them through submit_bio_noacct_nocheck duplicates the work
and can can cause deadlocks when freezing a queue with pending bio
write plugs.
Go straight to ->submit_bio or blk_mq_submit_bio to bypass the
superfluous extra freeze protection and checks.
Fixes: 9b1ce7f0c6 ("block: Implement zone append emulation")
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250611044416.2351850-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When blk_zone_write_plug_bio_endio() is called for a regular write BIO
used to emulate a zone append operation, that is, a BIO flagged with
BIO_EMULATES_ZONE_APPEND, the BIO operation code is restored to the
original REQ_OP_ZONE_APPEND but the BIO_EMULATES_ZONE_APPEND flag is not
cleared. Clear it to fully return the BIO to its orginal definition.
Fixes: 9b1ce7f0c6 ("block: Implement zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250611005915.89843-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via C45 (clause 45) mdiobus,
there is no verification of parameters passed to the ioctl and
it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.
Fix that by adding address verification before C45 read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation.
Fixes: 4e4aafcddb ("net: mdio: Add dedicated C45 API to MDIO bus drivers")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reported-by: Wenjing Shan <wenjing.shan@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via mdiobus, there is no verification of
parameters passed to the ioctl and it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.
Fix that by adding address verification before read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation.
Fixes: 080bb352fa ("net: phy: Maintain MDIO device and bus statistics")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reported-by: Wenjing Shan <wenjing.shan@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use common wrappers operating directly on the struct sg_table objects to
fix incorrect use of scatterlists sync calls. dma_sync_sg_for_*()
functions have to be called with the number of elements originally passed
to dma_map_sg_*() function, not the one returned in sgtable's nents.
Fixes: 1ffe095901 ("udmabuf: fix dma-buf cpu access")
CC: stable@vger.kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250507160913.2084079-3-m.szyprowski@samsung.com
Smatch pointed out this trivial typo:
drivers/dma-buf/dma-buf.c:1123 dma_buf_map_attachment()
warn: passing positive error code '16' to 'ERR_PTR'
drivers/dma-buf/dma-buf.c
1113 dma_resv_assert_held(attach->dmabuf->resv);
1114
1115 if (dma_buf_pin_on_map(attach)) {
1116 ret = attach->dmabuf->ops->pin(attach);
1117 /*
1118 * Catch exporters making buffers inaccessible even when
1119 * attachments preventing that exist.
1120 */
1121 WARN_ON_ONCE(ret == EBUSY);
^^^^^
This was probably intended to be -EBUSY?
1122 if (ret)
--> 1123 return ERR_PTR(ret);
^^^
Otherwise we will eventually crash.
1124 }
1125
1126 sg_table = attach->dmabuf->ops->map_dma_buf(attach, direction);
1127 if (!sg_table)
1128 sg_table = ERR_PTR(-ENOMEM);
1129 if (IS_ERR(sg_table))
1130 goto error_unpin;
1131
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20250605085336.62156-1-christian.koenig@amd.com
The nl80211_parse_connkeys() function currently uses kfree() to release
the 'result' structure in error handling paths. However, if an error
occurs due to result->def being less than 0, the 'result' structure may
contain sensitive information.
To prevent potential leakage of sensitive data, replace kfree() with
kfree_sensitive() when freeing 'result'. This change aligns with the
approach used in its caller, nl80211_join_ibss(), enhancing the overall
security of the wireless subsystem.
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20250523110156.4017111-1-zilin@seu.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix a handful of both build and stability issues across multiple drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCaEXB6gAKCRAsFbugiYzL
e1C9AQDjoq8eMj4tlqv8bliSiF1GqgxKWtKmaujMTkNxOpgc0gD/RV4o274RPP5C
OjghnAWYRoRUjhRCKcLLoECa6xkzJQY=
=1nxf
-----END PGP SIGNATURE-----
Merge tag 'ath-current-20250608' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git updates for v6.16-rc2
Fix a handful of both build and stability issues across multiple drivers.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit 4fcfcbe457 ("wifi: mwifiex: Fix HT40 bandwidth
issue.")
That commit introduces a regression, when HT40 mode is enabled,
received packets are lost, this was experience with W8997 with both
SDIO-UART and SDIO-SDIO variants. From an initial investigation the
issue solves on its own after some time, but it's not clear what is
the reason. Given that this was just a performance optimization, let's
revert it till we have a better understanding of the issue and a proper
fix.
Cc: Jeff Chen <jeff.chen_1@nxp.com>
Cc: stable@vger.kernel.org
Fixes: 4fcfcbe457 ("wifi: mwifiex: Fix HT40 bandwidth issue.")
Closes: https://lore.kernel.org/all/20250603203337.GA109929@francesco-nb/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20250605130302.55555-1-francesco@dolcini.it
[fix commit reference format]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
According to 802.1AE standard, when ES and SC flags in TCI are zero,
used SCI should be the current active SC_RX. Current code uses the
header MAC address. Without this patch, when ES flag is 0 (using a
bridge or switch), header MAC will not fit the SCI and MACSec frames
will be discarted.
In order to test this issue, MACsec link should be stablished between
two interfaces, setting SC and ES flags to zero and a port identifier
different than one. For example, using ip macsec tools:
ip link add link $ETH0 macsec0 type macsec port 11 send_sci off
end_station off
ip macsec add macsec0 tx sa 0 pn 2 on key 01 $ETH1_KEY
ip macsec add macsec0 rx port 11 address $ETH1_MAC
ip macsec add macsec0 rx port 11 address $ETH1_MAC sa 0 pn 2 on key 02
ip link set dev macsec0 up
ip link add link $ETH1 macsec1 type macsec port 11 send_sci off
end_station off
ip macsec add macsec1 tx sa 0 pn 2 on key 01 $ETH0_KEY
ip macsec add macsec1 rx port 11 address $ETH0_MAC
ip macsec add macsec1 rx port 11 address $ETH0_MAC sa 0 pn 2 on key 02
ip link set dev macsec1 up
Fixes: c09440f7dc ("macsec: introduce IEEE 802.1AE driver")
Co-developed-by: Andreu Montiel <Andreu.Montiel@technica-engineering.de>
Signed-off-by: Andreu Montiel <Andreu.Montiel@technica-engineering.de>
Signed-off-by: Carlos Fernandez <carlos.fernandez@technica-engineering.de>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This driver requires of_get_display_timing() from
CONFIG_VIDEOMODE_HELPERS but does not select it. If no other driver
selects it, there will be a failure from the linker if the driver is
built in or modpost if it is a module.
ERROR: modpost: "of_get_display_timing" [drivers/gpu/drm/sitronix/st7571-i2c.ko] undefined!
Select CONFIG_VIDEOMODE_HELPERS to resolve the build failure.
Fixes: 4b35f0f41e ("drm/st7571-i2c: add support for Sitronix ST7571 LCD controller")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250610-drm-st7571-i2c-select-videomode-helpers-v1-1-d30b50ff6e64@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The HKDF self-tests depend on the HMAC algorithms being registered.
HMAC is now registered at module_init, which put it at the same level as
HKDF. Move HKDF to late_initcall so that it runs afterwards.
Fixes: ef93f15628 ("Revert "crypto: run initcalls for generic implementations earlier"")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before appending sysdata, prepare_extradata() checks if any feature is
enabled in sysdata_fields (and exits early if none is enabled).
When SYSDATA_RELEASE was introduced, we missed adding it to the list of
features being checked against sysdata_fields in prepare_extradata().
The result was that, if only SYSDATA_RELEASE is enabled in
sysdata_fields, we incorreclty exit early and fail to append the
release.
Instead of checking specific bits in sysdata_fields, check if
sysdata_fields has ALL bit zeroed and exit early if true. This fixes
case when only SYSDATA_RELEASE enabled and makes the code more general /
less error prone in future feature implementation.
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Fixes: cfcc9239e7 ("netconsole: append release to sysdata")
Link: https://patch.msgid.link/20250609-netconsole-fix-v1-1-17543611ae31@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk->sk_prot->sock_is_readable is a valid function pointer when sk resides
in a sockmap. After the last sk_psock_put() (which usually happens when
socket is removed from sockmap), sk->sk_prot gets restored and
sk->sk_prot->sock_is_readable becomes NULL.
This makes sk_is_readable() racy, if the value of sk->sk_prot is reloaded
after the initial check. Which in turn may lead to a null pointer
dereference.
Ensure the function pointer does not turn NULL after the check.
Fixes: 8934ce2fd0 ("bpf: sockmap redirect ingress support")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250609-skisreadable-toctou-v1-1-d0dfb2d62c37@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TP-Link UE200 is a RTL8152B based USB 2.0 Fast Ethernet adapter. This
patch adds its device ID. It has been tested on Ubuntu 22.04.5.
Signed-off-by: Lucas Sanchez Sagrado <lucsansag@gmail.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/20250609145536.26648-1-lucsansag@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I've been focusing on networking BPF bits lately, add myself as a
reviewer.
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Acked-by: KP Singh <kpsingh@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20250610175442.2138504-1-stfomichev@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit a17b37a3f4 ("x86/idle: Change arguments of mwait_idle_with_hints()
to u32") changed the type of arguments of mwait_idle_with_hints() from
unsigned long to u32.
Change the type of variables in the call to mwait_idle_with_hints() to
unsigned int to follow the change.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Link: https://patch.msgid.link/20250609063528.48715-1-ubizjak@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On the MSI Modern 14 C5M the ECDT table contains invalid data:
UID : 00000000
GPE Number : 00 /* Invalid, 03 would be correct */
Namepath : "" /* Invalid, "\_SB.PCI0.SBRG.EC" would
* be correct
*/
This slows down the EC access as the wrong GPE event is used for
communication. Additionally the ID string is invalid.
Ignore such faulty ECDT tables by verifying that the ID string has
a valid format.
Tested-by: glpnk@proton.me
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20250529235310.540530-1-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
With nosmp in cmdline, other CPUs are not brought up, leaving
their cpc_desc_ptr NULL. CPU0's iteration via for_each_possible_cpu()
dereferences these NULL pointers, causing panic.
Panic backtrace:
[ 0.401123] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b8
...
[ 0.403255] [<ffffffff809a5818>] cppc_allow_fast_switch+0x6a/0xd4
...
Kernel panic - not syncing: Attempted to kill init!
Fixes: 3cc30dd00a ("cpufreq: CPPC: Enable fast_switch")
Reported-by: Xu Lu <luxu.kernel@bytedance.com>
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://patch.msgid.link/20250604023036.99553-1-cuiyunhui@bytedance.com
[ rjw: New subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit a17b37a3f4 ("x86/idle: Change arguments of mwait_idle_with_hints()
to u32") changed the type of arguments of mwait_idle_with_hints() from
unsigned long to u32.
Change the type of variables in the call to mwait_idle_with_hints() to
unsigned int to follow the change.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://patch.msgid.link/20250609064235.49146-1-ubizjak@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix a compile error in the `impl_has_hr_timer!` macro as follows:
error[E0599]: no method named cast_mut found for raw pointer *mut Foo in the current scope
The `container_of!` macro already returns a mutable pointer when used
in a `*mut T` context so the `.cast_mut()` method is not available.
[ We missed this one because there is no caller yet and it is
a macro. - Miguel ]
Fixes: 74d6a606c2 ("rust: retain pointer mut-ness in `container_of!`")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250606020505.3186533-1-fujita.tomonori@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
CXL has a symbol dependency on einj_core.ko, so if einj_init() fails then
cxl_core.ko fails to load. Prior to the faux_device_create() conversion,
einj_probe() failures were tracked by the einj_initialized flag without
failing einj_init().
Revert to that behavior and always succeed einj_init() given there is no
way, and no pressing need, to discern faux device-create vs device-probe
failures.
This situation arose because CXL knows proper kernel named objects to
trigger errors against, but acpi-einj knows how to perform the error
injection. The injection mechanism is shared with non-CXL use cases. The
result is CXL now has a module dependency on einj-core.ko, and init/probe
failures are handled at runtime.
Fixes: 6cb9441bfe ("ACPI: APEI: EINJ: Transition to the faux device interface")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ben Cheatham <benjamin.cheatham@amd.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250607033228.1475625-4-dan.j.williams@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpi-einj conversion to faux_device_create() leads to a noisy error
message when the error injection facility is disabled. Quiet the error as
CXL error injection via ACPI expects the module to stay loaded even if the
error injection facility is disabled.
This situation arose because CXL knows proper kernel named objects to
trigger errors against, but acpi-einj knows how to perform the error
injection. The injection mechanism is shared with non-CXL use cases. The
result is CXL now has a module dependency on einj-core.ko, and init/probe
failures are handled at runtime.
Fixes: 6cb9441bfe ("ACPI: APEI: EINJ: Transition to the faux device interface")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250607033228.1475625-3-dan.j.williams@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
faux_device_create() is almost a suitable candidate to replace
platform_driver_probe() if not for the fact that faux_device_create()
supports dynamic attach/detach of the driver.
Drop the bind attributes with the expectation that simple faux devices can
always assume that the device is permanently bound at create, and only
unbound at 'destroy'.
The acpi-einj driver depends on static bind.
Fixes: 6cb9441bfe ("ACPI: APEI: EINJ: Transition to the faux device interface")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250607033228.1475625-2-dan.j.williams@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This reverts commit 28615e6eed.
No, we don't make random features default to being on.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add unitdir variable for specifying the location to install systemd
service units instead of installing under ${libdir}/systemd/system
which doesn't work on some distributions.
-----BEGIN PGP SIGNATURE-----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=268v
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-6.16-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Merge an urgent cpupower utility fix for 6.16-rc1 from Shuah Khan:
"Add unitdir variable for specifying the location to install systemd
service units instead of installing under ${libdir}/systemd/system
which doesn't work on some distributions."
* tag 'linux-cpupower-6.16-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: split unitdir from libdir in Makefile
Previously, e1000_down called cancel_work_sync for the e1000 reset task
(via e1000_down_and_stop), which takes RTNL.
As reported by users and syzbot, a deadlock is possible in the following
scenario:
CPU 0:
- RTNL is held
- e1000_close
- e1000_down
- cancel_work_sync (cancel / wait for e1000_reset_task())
CPU 1:
- process_one_work
- e1000_reset_task
- take RTNL
To remedy this, avoid calling cancel_work_sync from e1000_down
(e1000_reset_task does nothing if the device is down anyway). Instead,
call cancel_work_sync for e1000_reset_task when the device is being
removed.
Fixes: e400c7444d ("e1000: Hold RTNL when e1000_down can be called")
Reported-by: syzbot+846bb38dc67fe62cc733@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/683837bf.a00a0220.52848.0003.GAE@google.com/
Reported-by: John <john.cs.hey@gmail.com>
Closes: https://lore.kernel.org/netdev/CAP=Rh=OEsn4y_2LvkO3UtDWurKcGPnZ_NPSXK=FbgygNXL37Sw@mail.gmail.com/
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
