A race condition exists where a paused VF's H2G request can be processed
and subsequently rejected. This rejection results in a FAST_REQ failure
being delivered to the KMD, which then terminates the CT via a dead
worker and triggers a GT reset—an undesirable outcome.
This workaround mitigates the issue by checking if a VF post-migration
recovery is in progress and aborting these adverse actions accordingly.
The GuC firmware will address this bug in an upcoming release. Once that
version is available and VF migration depends on it, this workaround can
be safely removed.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-30-matthew.brost@intel.com
Helpful to manually verify the GuC state machine can correctly replay
the state during a VF post-migration recovery. All replay paths have
been manually verified as triggered and working during testing.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-29-matthew.brost@intel.com
A queue must be in the submission backend's tracking state before the
LRC is created to avoid a race condition where the LRC's GGTT addresses
are not properly fixed up during VF post-migration recovery.
Move the queue initialization—which adds the queue to the submission
backend's tracking state—before LRC creation.
Also wait on pending GGTT fixups before allocating LRCs to avoid racing
with fixups.
v2:
- Wait on VF GGTT fixes before creating LRC (testing)
v5:
- Adjust comment in code (Tomasz)
- Reduce race window
v7:
- Only wakeup waiters in recovery path (CI)
- Wakeup waiters on abort
- Use GT warn on (Michal)
- Fix kernel doc for LRC ring size function (Tomasz)
v8:
- Guard against migration not supported or no memirq (CI)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-28-matthew.brost@intel.com
Fixup GuC submission pause / unpause functions to properly replay any
possible state lost during VF post migration recovery.
v3:
- Add helpers for revert / replay (Tomasz)
- Add comment around WQ NOPs (Tomasz)
v7:
- Only fixup / replay parallel queues once (Testing)
- Skip unpause step on queues created after resfix done (Testing)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-27-matthew.brost@intel.com
If VF post-migration recovery fails, the device is wedged. However,
submission queues still need to be enabled for proper cleanup. In such
cases, call into the GuC submission backend to restart all queues that
were previously paused.
v3:
- s/Avort/Abort (Tomasz)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-26-matthew.brost@intel.com
Before RESFIX_DONE, all CTs stuck in the H2G queue need to be squashed,
as they may contain actions which contain invalid GGTT references or are
unnecessary after HW change.
Starting the CTs clears all H2Gs in the queue. Any lost H2Gs are
resubmitted by the GuC submission state machine.
v3:
- Don't mess with head / tail values (Michal)
v4:
- Don't mess with broke (Michal)
- Add CTB_H2G_BUFFER_OFFSET (Michal)
v5:
- Adjust commit message (Tomasz)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-25-matthew.brost@intel.com
GuC needs to be live for the GuC submission state machine to resubmit
anything lost during VF post-migration recovery. Therefore, move the
kickstart step after `resfix` to ensure proper resubmission.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-23-matthew.brost@intel.com
TLB invalidations requests can be lost during VF post-migration
recovery. Since the VF has migrated, these invalidations are no longer
needed.
Reset the TLB invalidation frontend, which will signal all pending
fences.
v3:
- Move TLB invalidation reset after pausing submission (Tomasz)
- Adjust commit message (Michal)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-22-matthew.brost@intel.com
Flushing CTs (i.e., progressing all pending G2H messages) gives VF
post-migration recovery an accurate view of which H2G messages the GuC
has processed, enabling the GuC submission state machine to correctly
rebuild all state.
Also, stop all CT traffic, as the CT is not live during VF
post-migration recovery.
v3:
- xe_guc_ct_flush_and_stop rename (Michal)
- Drop extra GuC CT WQ wake up (Michal)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-21-matthew.brost@intel.com
The only case where the GuC submission backend cannot reason 100%
correctly is when a GuC context is registered during VF post-migration
recovery. In this scenario, it's possible that the GuC context register
H2G is processed, but the immediately following schedule-enable H2G gets
lost. The schedule-enable G2H "done" response is how the GuC state machine
determines whether context registration has completed.
A double register is harmless when using `GUC_HXG_TYPE_EVENT`, as GuC
simply drops the duplicate H2G. To keep things simple, use
`GUC_HXG_TYPE_EVENT` for all context registrations on VFs.
v5:
- Check for xe_sriov_vf_migration_supported (Tomasz)
v7:
- Add comment about subsequent protocol failures (Tomasz)
- Modify commit message (Michal)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-20-matthew.brost@intel.com
Blocking in work queues on a hardware action that may never occur —
especially when it depends on a software fixup also scheduled on the
a work queue — is a recipe for deadlock. This situation arises with
the preempt rebind worker and VF post-migration recovery. To prevent
potential deadlocks, avoid indefinite blocking in the preempt rebind
worker for VFs that support migration.
v4:
- Use dma_fence_wait_timeout (CI)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-19-matthew.brost@intel.com
If VF post-migration recovery is in progress, the recovery flow will
rebuild all GuC submission state. In this case, exit all waiters to
ensure that submission queue scheduling can also be paused. Avoid taking
any adverse actions after aborting the wait.
As part of waking up the GuC backend, suspend_wait can now return
-EAGAIN indicating the waiter should be retried. If the caller is
running on work item, that work item need to be requeued to avoid a
deadlock for the work item blocking the VF migration recovery work item.
v3:
- Don't block in preempt fence work queue as this can interfere with VF
post-migration work queue scheduling leading to deadlock (Testing)
- Use xe_gt_recovery_inprogress (Michal)
v5:
- Use static function for vf_recovery (Michal)
- Add helper to wake CT waiters (Michal)
- Move some code to following patch (Michal)
- Adjust commit message to explain suspend_wait returning -EAGAIN (Michal)
- Add kernel doc to suspend_wait around returning -EAGAIN
v7:
- Add comment on why a shared wait queue is need on VFs (Michal)
- Guard again suspend_wait signaling early on resfix donw (Tomasz)
v8:
- Fix kernel doc (CI)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-18-matthew.brost@intel.com
With well-behaved software, a GT reset should never occur, nor should it
happen during VF post-migration recovery. If it does, trigger a warning
but suppress the GT reset, as VF post-migration recovery is expected to
bring the VF back to a working state.
v3:
- Better commit message (Tomasz)
v5:
- Use xe_gt_WARN_ON (Michal)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-17-matthew.brost@intel.com
Be cautious and ensure the VF post-migration worker is not running
during driver unload.
v3:
- More teardown later in driver init, use devm (Tomasz)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-16-matthew.brost@intel.com
As multi-GT VF post-migration recovery can run in parallel on different
workqueues, but both GTs point to the same GGTT, only one GT needs to
shift the GGTT. However, both GTs need to know when this step has
completed. To coordinate this, perform the GGTT shift under the GGTT
lock. With shift being done under the lock, storing the shift value
becomes unnecessary.
In addition to above, move the GGTT VF config from the GT to the tile.
v3:
- Update commmit message (Tomasz)
v4:
- Move GGTT values to tile state (Michal)
- Use GGTT lock (Michal)
v5:
- Only take GGTT lock during recovery (CI)
- Drop goto in vf_get_submission_cfg (Michal)
- Add kernel doc around recovery in xe_gt_sriov_vf_query_config (Michal)
v7:
- Drop recovery variable (Michal)
- Use _locked naming (Michal)
- Use guard (Michal)
v9:
- Break LMEM changes into different patch (Michal)
- Fix layering (Michal)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-15-matthew.brost@intel.com
The LMEM VF provision is tile-layer-specific information. Move the LMEM
configuration to the tile layer accordingly.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-14-matthew.brost@intel.com
The GGTT lock is needed very early during GT initialization for a VF;
move the GGTT lock initialization to the allocation phase.
v8:
- Rework function structure (Michal)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-13-matthew.brost@intel.com
VF post migration recovery is the path of dma-fence signaling / reclaim,
avoid memory allocations in this path.
v3:
- s/lrc_wa_bb/scratch (Tomasz)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-12-matthew.brost@intel.com
While VF post-migration recovery is in progress, abort H2G sends with
-ECANCEL. These messages are treated as lost, and TLB invalidation
errors are suppressed. During this phase, the H2G channel is down, and
VF recovery requires the CT lock to proceed.
v3:
- Use xe_gt_recovery_inprogress (Michal)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-11-matthew.brost@intel.com
VF recovery is a per-GT operation, so it makes sense to isolate it to a
per-GT queue. Scheduling this operation on the same worker as the GT
reset and TDR not only aligns with this design but also helps avoid race
conditions, as those operations can also modify the queue state.
v2:
- Fix lockdep splat (Adam)
- Use xe_sriov_vf_migration_supported helper
v3:
- Drop xe_gt_sriov_ prefix for private functions (Michal)
- Drop message in xe_gt_sriov_vf_migration_init_early (Michal)
- Logic rework in vf_post_migration_notify_resfix_done (Michal)
- Rework init sequence layering (Michal)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-10-matthew.brost@intel.com
Add xe_gt_recovery_pending helper.
This helper serves as the singular point to determine whether a GT
recovery is currently in progress. Expected callers include the GuC CT
layer and the GuC submission layer. Atomically visable as soon as vCPU
are unhalted until VF recovery completes.
v3:
- Add GT layer xe_gt_recovery_inprogress (Michal)
- Don't blow up in memirq not enabled (CI)
- Add __memirq_received with clear argument (Michal)
- xe_memirq_sw_int_0_irq_pending rename (Michal)
- Use offset in xe_memirq_sw_int_0_irq_pending (Michal)
v4:
- Refactor xe_gt_recovery_inprogress logic around memirq (Michal)
v5:
- s/inprogress/pending (Michal)
v7:
- Fix typos, adjust comment (Michal)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-9-matthew.brost@intel.com
The LRC W/A currently checks for LRC being iomem in some places, while
in others it checks if the scratch buffer is non-NULL. This
inconsistency causes issues with the VF post-migration recovery code,
which blindly passes in a scratch buffer.
This patch standardizes the check by consistently verifying whether the
LRC is iomem to determine if the scratch buffer should be used.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-8-matthew.brost@intel.com
Now that we save the job's head during submission, it's no longer
necessary to adjust the LRC ring head during resubmission. Instead, a
software-based adjustment of the tail will overwrite the old jobs in
place. For some odd reason, adjusting the LRC ring head didn't work on
parallel queues, which was causing issues in our CI.
v5:
- Add comment in guc_exec_queue_start explaning why the function works
(Auld)
v7:
- Only adjust first state on first unsignaled job (Auld)
v8:
- Break unsignaled job handling to separate patch (Auld)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-7-matthew.brost@intel.com
In all cases where the first pending job helper is called, we only want
to retrieve the first unsignaled pending job, as this helper is used
exclusively in recovery flows. It is possible for signaled jobs to
remain in the pending list as the scheduler is stopped, so those should
be skipped.
Also, add kernel documentation to clarify this behavior.
v8:
- Split out into own patch (Auld)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-6-matthew.brost@intel.com
VF migration requires jobs to remain pending so they can be replayed
after the VF comes back. Previously, LR job fences were intentionally
signaled immediately after submission to avoid the risk of exporting
them, as these fences do not naturally signal in a timely manner and
could break dma-fence contracts. A side effect of this approach was that
LR jobs were never added to the DRM scheduler’s pending list, preventing
them from being tracked for later resubmission.
We now avoid signaling LR job fences and ensure they are never exported;
Xe already guards against exporting these internal fences. With that
guarantee in place, we can safely track LR jobs in the scheduler’s
pending list so they are eligible for resubmission during VF
post-migration recovery (and similar recovery paths).
An added benefit is that LR queues now gain the DRM scheduler’s built-in
flow control over ring usage rather than rejecting new jobs in the exec
IOCTL if the ring is full.
v2:
- Ensure DRM scheduler TDR doesn't run for LR jobs
- Stack variable for killed_or_banned_or_wedged
v4:
- Clarify commit message (Tomasz)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-5-matthew.brost@intel.com
Add explicit tracking in the GuC submission state to record the source
of a pending enable (TDR vs. queue resume path vs. submission).
Disambiguating the origin lets the GuC submission state machine apply
the correct recovery/replay behavior.
This helps VF restore: when the device comes back, the state machine knows
whether the pending enable stems from timeout recovery, from a queue resume
sequence, or submission and can gate sequencing and fixups accordingly.
v4:
- Clarify commit message (Tomasz)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-4-matthew.brost@intel.com
VF post-migration recovery needs to modify the ring with updated GGTT
addresses for pending jobs. Save off position in ring in which a job was
programmed to facilitate.
v4:
- s/VF resume/VF post-migration recovery (Tomasz)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-3-matthew.brost@intel.com
kmalloc can fail, the returned value must have a NULL check. This should
be immediately after kmalloc for clarity.
v5:
- Assert state->buffer in setup_bo if buffer is iomem (Tomasz)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-2-matthew.brost@intel.com
Add "INTC10D1" ACPI device-id for MTL-CVF devices, like the Dell Latitude
7450.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2368506
Signed-off-by: Hans de Goede <hansg@kernel.org>
Acked-by: Israel Cepeda <israel.a.cepeda.lopez@intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add missing configuration for loopback mode in airhoha_set_gdm2_loopback
routine.
Fixes: 9cd451d414 ("net: airoha: Add loopback support for GDM2")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251008-airoha-loopback-mode-fix-v2-1-045694fe7f60@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski says:
====================
eth: fbnic: fix XDP_TX and XDP vs qstats
Fix XDP_TX hangs and adjust the XDP statistics to match the definition
of qstats. The three problems are somewhat distinct.
XDP_TX hangs is a simple coding bug (patch 1).
The accounting of XDP packets is all over the place. Fix it to obey
qstat rules (packets seen by XDP always counted as Rx packets).
Patch 2 fixes the basic accounting, patch 3 touches up saving
the stats when rings are freed.
Patch 6 corrects reporting of alloc_fail stats which prevented
the pp_alloc_fail test from passing.
Patches 4, 5, 7, 8, 9 add or fix related test cases.
v2:
- [patch 2] remove now unnecessary byte adjustment
- [patch 8] use seen_fails more
v1: https://lore.kernel.org/20251003233025.1157158-1-kuba@kernel.org
Testing on fbnic below:
$ ./tools/testing/selftests/drivers/net/hw/pp_alloc_fail.py
TAP version 13
1..1
fbnic-err: bad MMIO read address 0x80074
fbnic-err: bad MMIO read address 0x80074
# Seen: pkts:20605 fails:40 (pass thrs:12)
# ethtool -G change retval: success
ok 1 pp_alloc_fail.test_pp_alloc
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
$ ./tools/testing/selftests/drivers/net/xdp.py
TAP version 13
1..13
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
ok 5 xdp.test_xdp_native_tx_sb
ok 6 xdp.test_xdp_native_tx_mb
# Failed run: pkt_sz 2048, offset 1. Last successful run: pkt_sz 1024, offset 256. Reason: Adjustment failed
ok 7 xdp.test_xdp_native_adjst_tail_grow_data
ok 8 xdp.test_xdp_native_adjst_tail_shrnk_data
# Failed run: pkt_sz 512, offset -256. Last successful run: pkt_sz 512, offset -128. Reason: Adjustment failed
ok 9 xdp.test_xdp_native_adjst_head_grow_data
# Failed run: pkt_sz (2048) > HDS threshold (1536) and offset 64 > 48
ok 10 xdp.test_xdp_native_adjst_head_shrnk_data
ok 11 xdp.test_xdp_native_qstats_pass
ok 12 xdp.test_xdp_native_qstats_drop
ok 13 xdp.test_xdp_native_qstats_tx
# Totals: pass:13 fail:0 xfail:0 xpass:0 skip:0 error:0
====================
Link: https://patch.msgid.link/20251007232653.2099376-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add kernel config for error injection as needed by pp_alloc_fail.py
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 9da271f825 ("selftests: drv-net-hw: add test for memory allocation failures with page pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-10-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Lower the expected level of traffic in the pp_alloc_fail test
and calculate failure counter thresholds based on the traffic
rather than using a fixed constant.
We only have "QEMU HW" in NIPA right now, and the test (due to
debug dependencies) only works on debug kernels in the first place.
We need some place for it to pass otherwise it seems to be bit
rotting. So lower the traffic threshold so that it passes on QEMU
and with a debug kernel...
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-9-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix linter warnings, it's a bit hard to check for new ones otherwise.
W0311: Bad indentation. Found 16 spaces, expected 12 (bad-indentation)
C0114: Missing module docstring (missing-module-docstring)
W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
C0116: Missing function or method docstring (missing-function-docstring)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-8-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rx processing under normal circumstances has 3 rings - 2 buffer
rings (heads, payloads) and a completion ring. All the rings
have a struct fbnic_ring. Make sure we expose alloc_failed
counter from the buffer rings, previously only the alloc_failed
from the completion ring was reported, even tho all ring types
may increment this counter (buffer rings in __fbnic_fill_bdq()).
This makes the pp_alloc_fail.py test pass, it expects the qstat
to be incrementing as page pool injections happen.
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 67dc4eb5fc ("eth: fbnic: report software Rx queue stats")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-7-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Send a non-trivial number of packets and make sure that they
are counted correctly in qstats. Per qstats specification
XDP is the first layer of the stack so we should see Rx and Tx
counters go up for packets which went thru XDP.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-6-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Test uses "netnl" for the ethtool family which is quite confusing
(one would expect netdev family would use this name).
No functional changes.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-5-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When rings are freed - stats get added to the device level stat
structs. Save the stats from the XDP_TX ring just as Tx stats.
Previously they would be saved to Rx and Tx stats. So we'd not
see XDP_TX packets as Rx during runtime but after an down/up cycle
the packets would appear in stats.
Correct the helper used by ethtool code which does a runtime
config switch.
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 5213ff0863 ("eth: fbnic: Collect packet statistics for XDP")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-4-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make XDP-handled packets appear in the Rx stats. The driver has been
counting XDP_TX packets on the Tx ring, but there wasn't much accounting
on the Rx side (the Rx bytes appear to be incremented on XDP_TX but
XDP_DROP / XDP_ABORT are only counted as Rx drops).
Counting XDP_TX packets (not just bytes) in Rx stats looks like
a simple bug of omission.
The XDP_DROP handling appears to be intentional. Whether XDP_DROP
packets should be counted in interface-level Rx stats is a bit
unclear historically. When we were defining qstats, however,
we clarified based on operational experience that in this context:
name: rx-packets
doc: |
Number of wire packets successfully received and passed to the stack.
For drivers supporting XDP, XDP is considered the first layer
of the stack, so packets consumed by XDP are still counted here.
fbnic does not obey this requirement. Since XDP support has been added
in current release cycle, instead of splitting interface and qstat
handling - make them both follow the qstat definition.
Another small tweak here is that we count bytes as received on the wire
rather than post-XDP bytes (xdp_get_buff_len() vs skb->len).
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 5213ff0863 ("eth: fbnic: Collect packet statistics for XDP")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
XDP_TX typically uses no offloads. To optimize XDP we added a "default
descriptor" feature to the chip, which allows us to send XDP frames with
just the buffer descriptors (DMA address + length). All the metadata
descriptors are derived from the queue config.
Commit under Fixes missed adding setting the defaults up when transplanting
the code from the prototype driver. Importantly after reset the "request
completion" bit is not set. Packets still get sent but there's no
completion, so ring is not cleaned up. We can send one ring's worth
of packets and then will start dropping all frames that got the XDP_TX
action from the XDP prog.
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 168deb7b31 ("eth: fbnic: Add support for XDP_TX action")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJBBAABCAArFiEEgKkgxbID4Gn1hq6fcJGo2a1f9gAFAmjmXroNHGZ3QHN0cmxl
bi5kZQAKCRBwkajZrV/2AEPmD/wJVaVNhEgmqY0abipD7Sx59ygRIVn6JSLGtimS
UO8G9S3cr3nT4i2wr1MYNiUQyjs18u4Q73kr8tKalXV99E05OVW1tWAeAztQDeZM
UNDf44Of1XwwlthIuQa7vyt4aqxmGhQDXKcj1cx2ZHjYQbJ3GshoMAZq90iKKqXN
Qlbpy216P71KzaN214bKDSgx8ffoWDRxcQwnbY4EWzMErKJqr5I6zLoJo9hMms0X
JpEqkUaY4PdackQJmBEoOaMphiG9H0u16PtEycfu++YrM/Xf5CJpiCFkp9mjZs+E
iNpLNF70phCA2ih3mwZFzfgPjYCXNSElOt0lGJFZVTVlGb8HLfBRNxKRMKsaCeZc
THZSPo2KMPI+UZle5Cyj9WNLWoVeTNtc2BlmMbSiTRRV5BWp1z20zgfymS++t0F7
hul2wWT7EH0cD87lJ/YUaGcM60nTZuNz7dKchTICwVyWpvCh0W/IhHM1JavfdPg2
gGCyPPsy1NKwXLCBym/DpKfIIwjR3bqH4s9miZRHt1a2PVX+JWxK72D0RasWPISz
cNs6bzQhfi6Q2l6gFJ8iGWWVr+L7J5+JmLdp8G4yQaJ+Fa7LggCIVMGOpl4QD7oA
lILvaXdfi402Oqkcho02gbtC0iDgVA8Grs28r/6KBsVFseejClvh7LQe9YLoFNZT
Fp7oAQ==
=u19C
-----END PGP SIGNATURE-----
Merge tag 'nf-25-10-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
The following patchset contains Netfilter fixes for *net*:
1) Fix crash (call recursion) when nftables synproxy extension is used
in an object map. When this feature was added in v5.4 the required
hook call validation was forgotten.
Fix from Fernando Fernandez Mancera.
2) bridge br_vlan_fill_forward_path_pvid uses incorrect
rcu_dereference_protected(); we only have rcu read lock but not
RTNL. Fix from Eric Woudstra.
Last two patches address flakes in two existing selftests.
netfilter pull request nf-25-10-08
* tag 'nf-25-10-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: query conntrack state to check for port clash resolution
selftests: netfilter: nft_fib.sh: fix spurious test failures
bridge: br_vlan_fill_forward_path_pvid: use br_vlan_group_rcu()
netfilter: nft_objref: validate objref and objrefmap expressions
====================
Link: https://patch.msgid.link/20251008125942.25056-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move the ssize check to the start in essiv_aead_crypt so that
it's also checked for decryption and in-place encryption.
Reported-by: Muhammad Alifa Ramdhan <ramdhan@starlabs.sg>
Fixes: be1eb7f78a ("crypto: essiv - create wrapper template for ESSIV generation")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- Extended 'perf annotate' with DWARF type information (--code-with-type)
integration in the TUI, including a 'T' hotkey to toggle it.
- Enhanced 'perf bench mem' with new mmap() workloads and control over
page/chunk sizes.
- Fix 'perf stat' error handling to correctly display unsupported events.
- Improved support for Clang cross-compilation.
- Refactored LLVM and Capstone disasm for modularity.
- Introduced the :X modifier to exclude an event from automatic regrouping.
- Adjusted KVM sampling defaults to use the "cycles" event to prevent failures.
- Added comprehensive support for decoding PowerPC Dispatch Trace Log (DTL).
- Updated Arm SPE tracing logic for better analysis of memory and snoop
details.
- Synchronized Intel PMU events and metrics with TMA 5.1 across multiple
processor generations.
- Converted dependencies like libperl and libtracefs to be opt-in.
- Handle more Rust symbols in kallsyms ('N', debugging).
- Improve the python binding to allow for python based tools to use more
of the libraries, add a 'ilist' utility to test those new bindings.
- Various 'perf test' fixes.
- Kan Liang no longer a perf tools reviewer.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCaObIdAAKCRCyPKLppCJ+
JyM+AQCWCqdMdiOrJfsqwBAthJmLA2j+haprucR9b2XAi0CLTAD8DGaax3XQbIxM
3D6PUd6/qschIy0f77eYqCYjVQXJkQM=
=ibgu
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.18-1-2025-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Extended 'perf annotate' with DWARF type information
(--code-with-type) integration in the TUI, including a 'T'
hotkey to toggle it
- Enhanced 'perf bench mem' with new mmap() workloads and control
over page/chunk sizes
- Fix 'perf stat' error handling to correctly display unsupported
events
- Improved support for Clang cross-compilation
- Refactored LLVM and Capstone disasm for modularity
- Introduced the :X modifier to exclude an event from automatic
regrouping
- Adjusted KVM sampling defaults to use the "cycles" event to prevent
failures
- Added comprehensive support for decoding PowerPC Dispatch Trace Log
(DTL)
- Updated Arm SPE tracing logic for better analysis of memory and snoop
details
- Synchronized Intel PMU events and metrics with TMA 5.1 across
multiple processor generations
- Converted dependencies like libperl and libtracefs to be opt-in
- Handle more Rust symbols in kallsyms ('N', debugging)
- Improve the python binding to allow for python based tools to use
more of the libraries, add a 'ilist' utility to test those new
bindings
- Various 'perf test' fixes
- Kan Liang no longer a perf tools reviewer
* tag 'perf-tools-for-v6.18-1-2025-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (192 commits)
perf tools: Fix arm64 libjvmti build by generating unistd_64.h
perf tests: Don't retest sections in "Object code reading"
perf docs: Document building with Clang
perf build: Support build with clang
perf test coresight: Dismiss clang warning for unroll loop thread
perf test coresight: Dismiss clang warning for thread loop
perf test coresight: Dismiss clang warning for memcpy thread
perf build: Disable thread safety analysis for perl header
perf build: Correct CROSS_ARCH for clang
perf python: split Clang options when invoking Popen
tools build: Align warning options with perf
perf disasm: Remove unused evsel from 'struct annotate_args'
perf srcline: Fallback between addr2line implementations
perf disasm: Make ins__scnprintf() and ins__is_nop() static
perf dso: Clean up read_symbol() error handling
perf dso: Support BPF programs in dso__read_symbol()
perf dso: Move read_symbol() from llvm/capstone to dso
perf llvm: Reduce LLVM initialization
perf check: Add libLLVM feature
perf parse-events: Fix parsing of >30kb event strings
...
It was reported that using __copy_from_user_inatomic() can actually
schedule. Which is bad when preemption is disabled. Even though there's
logic to check in_atomic() is set, but this is a nop when the kernel is
configured with PREEMPT_NONE. This is due to page faulting and the code
could schedule with preemption disabled.
Link: https://lore.kernel.org/all/20250819105152.2766363-1-luogengkun@huaweicloud.com/
The solution was to change the __copy_from_user_inatomic() to
copy_from_user_nofault(). But then it was reported that this caused a
regression in Android. There's several applications writing into
trace_marker() in Android, but now instead of showing the expected data,
it is showing:
tracing_mark_write: <faulted>
After reverting the conversion to copy_from_user_nofault(), Android was
able to get the data again.
Writes to the trace_marker is a way to efficiently and quickly enter data
into the Linux tracing buffer. It takes no locks and was designed to be as
non-intrusive as possible. This means it cannot allocate memory, and must
use pre-allocated data.
A method that is actively being worked on to have faultable system call
tracepoints read user space data is to allocate per CPU buffers, and use
them in the callback. The method uses a technique similar to seqcount.
That is something like this:
preempt_disable();
cpu = smp_processor_id();
buffer = this_cpu_ptr(&pre_allocated_cpu_buffers, cpu);
do {
cnt = nr_context_switches_cpu(cpu);
migrate_disable();
preempt_enable();
ret = copy_from_user(buffer, ptr, size);
preempt_disable();
migrate_enable();
} while (!ret && cnt != nr_context_switches_cpu(cpu));
if (!ret)
ring_buffer_write(buffer);
preempt_enable();
It's a little more involved than that, but the above is the basic logic.
The idea is to acquire the current CPU buffer, disable migration, and then
enable preemption. At this moment, it can safely use copy_from_user().
After reading the data from user space, it disables preemption again. It
then checks to see if there was any new scheduling on this CPU. If there
was, it must assume that the buffer was corrupted by another task. If
there wasn't, then the buffer is still valid as only tasks in preemptable
context can write to this buffer and only those that are running on the
CPU.
By using this method, where trace_marker open allocates the per CPU
buffers, trace_marker writes can access user space and even fault it in,
without having to allocate or take any locks of its own.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Luo Gengkun <luogengkun@huaweicloud.com>
Cc: Wattson CI <wattson-external@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20251008124510.6dba541a@gandalf.local.home
Fixes: 3d62ab32df ("tracing: Fix tracing_marker may trigger page fault during preempt_disable")
Reported-by: Runping Lai <runpinglai@google.com>
Tested-by: Runping Lai <runpinglai@google.com>
Closes: https://lore.kernel.org/linux-trace-kernel/20251007003417.3470979-2-runpinglai@google.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This patch adds information about Ceph bug tracking system.
[ idryomov: add the same for RBD, don't mention include/linux/ceph/
again ]
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The refactoring in 4292a1e45f ("PCI: Refactor distributing available
memory to use loops") switched pci_bus_distribute_available_resources() to
operate on an array of bridge windows. That accidentally looked up bus
resources via pci_bus_resource_n() and then passed those pointers to helper
routines that expect the resource to belong to the device. As soon as we
execute that code, pci_resource_num() warned because the resource wasn't in
the bridge's resource array.
This happens on my AMD Strix Halo machine with Thunderbolt device; the
error message is shown below:
WARNING: CPU: 6 PID: 272 at drivers/pci/pci.h:471 pci_bus_distribute_available_resources+0x6ad/0x6d0
CPU: 6 UID: 0 PID: 272 Comm: irq/33-pciehp Not tainted 6.17.0+ #1 PREEMPT(voluntary)
Hardware name: PELADN YO Series/YO1, BIOS 1.04 05/15/2025
RIP: 0010:pci_bus_distribute_available_resources+0x6ad/0x6d0
Call Trace:
pci_bus_distribute_available_resources+0x590/0x6d0
pci_bridge_distribute_available_resources+0x62/0xb0
pci_assign_unassigned_bridge_resources+0x65/0x1b0
pciehp_configure_device+0x92/0x160
pciehp_handle_presence_or_link_change+0x1b5/0x350
pciehp_ist+0x147/0x1c0
Fix the regression by always fetching the resource directly from the bridge
with pci_resource_n(bridge, PCI_BRIDGE_RESOURCES + i). This restores the
original behaviour while keeping the refactored structure. Then we can
successfully assign resources to the Thunderbolt device.
Fixes: 4292a1e45f ("PCI: Refactor distributing available memory to use loops")
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Closes: https://lore.kernel.org/r/dd551b81-9e81-480b-aab3-7cf8b8bbc1d0@panix.com
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
[bhelgaas: trim timestamps, etc from commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-By: Kenneth R. Crudup <kenny@panix.com>
Link: https://lore.kernel.org/r/F833CC81-7C60-48FC-A31C-B9999DCC6FA2@icloud.com
Link: https://patch.msgid.link/tencent_8C54420E1B0FF8D804C1B4651DF970716309@qq.com
The mds auth caps check should also validate the
fsname along with the associated caps. Not doing
so would result in applying the mds auth caps of
one fs on to the other fs in a multifs ceph cluster.
The bug causes multiple issues w.r.t user
authentication, following is one such example.
Steps to Reproduce (on vstart cluster):
1. Create two file systems in a cluster, say 'fsname1' and 'fsname2'
2. Authorize read only permission to the user 'client.usr' on fs 'fsname1'
$ceph fs authorize fsname1 client.usr / r
3. Authorize read and write permission to the same user 'client.usr' on fs 'fsname2'
$ceph fs authorize fsname2 client.usr / rw
4. Update the keyring
$ceph auth get client.usr >> ./keyring
With above permssions for the user 'client.usr', following is the
expectation.
a. The 'client.usr' should be able to only read the contents
and not allowed to create or delete files on file system 'fsname1'.
b. The 'client.usr' should be able to read/write on file system 'fsname2'.
But, with this bug, the 'client.usr' is allowed to read/write on file
system 'fsname1'. See below.
5. Mount the file system 'fsname1' with the user 'client.usr'
$sudo bin/mount.ceph usr@.fsname1=/ /kmnt_fsname1_usr/
6. Try creating a file on file system 'fsname1' with user 'client.usr'. This
should fail but passes with this bug.
$touch /kmnt_fsname1_usr/file1
7. Mount the file system 'fsname1' with the user 'client.admin' and create a
file.
$sudo bin/mount.ceph admin@.fsname1=/ /kmnt_fsname1_admin
$echo "data" > /kmnt_fsname1_admin/admin_file1
8. Try removing an existing file on file system 'fsname1' with the user
'client.usr'. This shoudn't succeed but succeeds with the bug.
$rm -f /kmnt_fsname1_usr/admin_file1
For more information, please take a look at the corresponding mds/fuse patch
and tests added by looking into the tracker mentioned below.
v2: Fix a possible null dereference in doutc
v3: Don't store fsname from mdsmap, validate against
ceph_mount_options's fsname and use it
v4: Code refactor, better warning message and
fix possible compiler warning
[ Slava.Dubeyko: "fsname check failed" -> "fsname mismatch" ]
Link: https://tracker.ceph.com/issues/72167
Signed-off-by: Kotresh HR <khiremat@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
