mirror of
https://github.com/torvalds/linux.git
synced 2026-06-07 22:14:04 +02:00
ef6a7c27db
43321 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
3b8a9b2e68 |
Tracing fixes for v6.7-rc5:
- Fix eventfs to check creating new files for events with names greater than NAME_MAX. The eventfs lookup needs to check the return result of simple_lookup(). - Fix the ring buffer to check the proper max data size. Events must be able to fit on the ring buffer sub-buffer, if it cannot, then it fails to be written and the logic to add the event is avoided. The code to check if an event can fit failed to add the possible absolute timestamp which may make the event not be able to fit. This causes the ring buffer to go into an infinite loop trying to find a sub-buffer that would fit the event. Luckily, there's a check that will bail out if it looped over a 1000 times and it also warns. The real fix is not to add the absolute timestamp to an event that is starting at the beginning of a sub-buffer because it uses the sub-buffer timestamp. By avoiding the timestamp at the start of the sub-buffer allows events that pass the first check to always find a sub-buffer that it can fit on. - Have large events that do not fit on a trace_seq to print "LINE TOO BIG" like it does for the trace_pipe instead of what it does now which is to silently drop the output. - Fix a memory leak of forgetting to free the spare page that is saved by a trace instance. - Update the size of the snapshot buffer when the main buffer is updated if the snapshot buffer is allocated. - Fix ring buffer timestamp logic by removing all the places that tried to put the before_stamp back to the write stamp so that the next event doesn't add an absolute timestamp. But each of these updates added a race where by making the two timestamp equal, it was validating the write_stamp so that it can be incorrectly used for calculating the delta of an event. - There's a temp buffer used for printing the event that was using the event data size for allocation when it needed to use the size of the entire event (meta-data and payload data) - For hardening, use "%.*s" for printing the trace_marker output, to limit the amount that is printed by the size of the event. This was discovered by development that added a bug that truncated the '\0' and caused a crash. - Fix a use-after-free bug in the use of the histogram files when an instance is being removed. - Remove a useless update in the rb_try_to_discard of the write_stamp. The before_stamp was already changed to force the next event to add an absolute timestamp that the write_stamp is not used. But the write_stamp is modified again using an unneeded 64-bit cmpxchg. - Fix several races in the 32-bit implementation of the rb_time_cmpxchg() that does a 64-bit cmpxchg. - While looking at fixing the 64-bit cmpxchg, I noticed that because the ring buffer uses normal cmpxchg, and this can be done in NMI context, there's some architectures that do not have a working cmpxchg in NMI context. For these architectures, fail recording events that happen in NMI context. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZX0nChQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qlOMAQD3iegTcceQl9lAsroa3tb3xdweC1GP 51MsX5athxSyoQEAutI/2pBCtLFXgTLMHAMd5F23EM1U9rha7W0myrnvKQY= =d3bS -----END PGP SIGNATURE----- Merge tag 'trace-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Fix eventfs to check creating new files for events with names greater than NAME_MAX. The eventfs lookup needs to check the return result of simple_lookup(). - Fix the ring buffer to check the proper max data size. Events must be able to fit on the ring buffer sub-buffer, if it cannot, then it fails to be written and the logic to add the event is avoided. The code to check if an event can fit failed to add the possible absolute timestamp which may make the event not be able to fit. This causes the ring buffer to go into an infinite loop trying to find a sub-buffer that would fit the event. Luckily, there's a check that will bail out if it looped over a 1000 times and it also warns. The real fix is not to add the absolute timestamp to an event that is starting at the beginning of a sub-buffer because it uses the sub-buffer timestamp. By avoiding the timestamp at the start of the sub-buffer allows events that pass the first check to always find a sub-buffer that it can fit on. - Have large events that do not fit on a trace_seq to print "LINE TOO BIG" like it does for the trace_pipe instead of what it does now which is to silently drop the output. - Fix a memory leak of forgetting to free the spare page that is saved by a trace instance. - Update the size of the snapshot buffer when the main buffer is updated if the snapshot buffer is allocated. - Fix ring buffer timestamp logic by removing all the places that tried to put the before_stamp back to the write stamp so that the next event doesn't add an absolute timestamp. But each of these updates added a race where by making the two timestamp equal, it was validating the write_stamp so that it can be incorrectly used for calculating the delta of an event. - There's a temp buffer used for printing the event that was using the event data size for allocation when it needed to use the size of the entire event (meta-data and payload data) - For hardening, use "%.*s" for printing the trace_marker output, to limit the amount that is printed by the size of the event. This was discovered by development that added a bug that truncated the '\0' and caused a crash. - Fix a use-after-free bug in the use of the histogram files when an instance is being removed. - Remove a useless update in the rb_try_to_discard of the write_stamp. The before_stamp was already changed to force the next event to add an absolute timestamp that the write_stamp is not used. But the write_stamp is modified again using an unneeded 64-bit cmpxchg. - Fix several races in the 32-bit implementation of the rb_time_cmpxchg() that does a 64-bit cmpxchg. - While looking at fixing the 64-bit cmpxchg, I noticed that because the ring buffer uses normal cmpxchg, and this can be done in NMI context, there's some architectures that do not have a working cmpxchg in NMI context. For these architectures, fail recording events that happen in NMI context. * tag 'trace-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ring-buffer: Do not record in NMI if the arch does not support cmpxchg in NMI ring-buffer: Have rb_time_cmpxchg() set the msb counter too ring-buffer: Fix 32-bit rb_time_read() race with rb_time_cmpxchg() ring-buffer: Fix a race in rb_time_cmpxchg() for 32 bit archs ring-buffer: Remove useless update to write_stamp in rb_try_to_discard() ring-buffer: Do not try to put back write_stamp tracing: Fix uaf issue when open the hist or hist_debug file tracing: Add size check when printing trace_marker output ring-buffer: Have saved event hold the entire event ring-buffer: Do not update before stamp when switching sub-buffers tracing: Update snapshot buffer on resize if it is allocated ring-buffer: Fix memory leak of free page eventfs: Fix events beyond NAME_MAX blocking tasks tracing: Have large events show up as '[LINE TOO BIG]' instead of nothing ring-buffer: Fix writing to the buffer with max_data_size |
||
|
Jens Axboe
|
ae1914174a |
cred: get rid of CONFIG_DEBUG_CREDENTIALS
This code is rarely (never?) enabled by distros, and it hasn't caught anything in decades. Let's kill off this legacy debug code. Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Jens Axboe
|
f8fa5d7692 |
cred: switch to using atomic_long_t
There are multiple ways to grab references to credentials, and the only protection we have against overflowing it is the memory required to do so. With memory sizes only moving in one direction, let's bump the reference count to 64-bit and move it outside the realm of feasibly overflowing. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
a62aa88ba1 |
17 hotfixes. 8 are cc:stable and the other 9 pertain to post-6.6 issues.
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZXxs8wAKCRDdBJ7gKXxA junbAQCdItfHHinkWziciOrb0387wW+5WZ1ohqRFW8pGYLuasQEArpKmw13bvX7z e+ec9K1Ek9MlIsO2RwORR4KHH4MAbwA= =YpZh -----END PGP SIGNATURE----- Merge tag 'mm-hotfixes-stable-2023-12-15-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "17 hotfixes. 8 are cc:stable and the other 9 pertain to post-6.6 issues" * tag 'mm-hotfixes-stable-2023-12-15-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/mglru: reclaim offlined memcgs harder mm/mglru: respect min_ttl_ms with memcgs mm/mglru: try to stop at high watermarks mm/mglru: fix underprotected page cache mm/shmem: fix race in shmem_undo_range w/THP Revert "selftests: error out if kernel header files are not yet built" crash_core: fix the check for whether crashkernel is from high memory x86, kexec: fix the wrong ifdeffery CONFIG_KEXEC sh, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC mips, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC m68k, kexec: fix the incorrect ifdeffery and build dependency of CONFIG_KEXEC loongarch, kexec: change dependency of object files mm/damon/core: make damon_start() waits until kdamond_fn() starts selftests/mm: cow: print ksft header before printing anything else mm: fix VMA heap bounds checking riscv: fix VMALLOC_START definition kexec: drop dependency on ARCH_SUPPORTS_KEXEC from CRASH_DUMP |
||
|
Steven Rostedt (Google)
|
712292308a |
ring-buffer: Do not record in NMI if the arch does not support cmpxchg in NMI
As the ring buffer recording requires cmpxchg() to work, if the architecture does not support cmpxchg in NMI, then do not do any recording within an NMI. Link: https://lore.kernel.org/linux-trace-kernel/20231213175403.6fc18540@gandalf.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt (Google)
|
0aa0e5289c |
ring-buffer: Have rb_time_cmpxchg() set the msb counter too
The rb_time_cmpxchg() on 32-bit architectures requires setting three
32-bit words to represent the 64-bit timestamp, with some salt for
synchronization. Those are: msb, top, and bottom
The issue is, the rb_time_cmpxchg() did not properly salt the msb portion,
and the msb that was written was stale.
Link: https://lore.kernel.org/linux-trace-kernel/20231215084114.20899342@rorschach.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes:
|
||
|
Mathieu Desnoyers
|
dec890089b |
ring-buffer: Fix 32-bit rb_time_read() race with rb_time_cmpxchg()
The following race can cause rb_time_read() to observe a corrupted time
stamp:
rb_time_cmpxchg()
[...]
if (!rb_time_read_cmpxchg(&t->msb, msb, msb2))
return false;
if (!rb_time_read_cmpxchg(&t->top, top, top2))
return false;
<interrupted before updating bottom>
__rb_time_read()
[...]
do {
c = local_read(&t->cnt);
top = local_read(&t->top);
bottom = local_read(&t->bottom);
msb = local_read(&t->msb);
} while (c != local_read(&t->cnt));
*cnt = rb_time_cnt(top);
/* If top and msb counts don't match, this interrupted a write */
if (*cnt != rb_time_cnt(msb))
return false;
^ this check fails to catch that "bottom" is still not updated.
So the old "bottom" value is returned, which is wrong.
Fix this by checking that all three of msb, top, and bottom 2-bit cnt
values match.
The reason to favor checking all three fields over requiring a specific
update order for both rb_time_set() and rb_time_cmpxchg() is because
checking all three fields is more robust to handle partial failures of
rb_time_cmpxchg() when interrupted by nested rb_time_set().
Link: https://lore.kernel.org/lkml/20231211201324.652870-1-mathieu.desnoyers@efficios.com/
Link: https://lore.kernel.org/linux-trace-kernel/20231212193049.680122-1-mathieu.desnoyers@efficios.com
Fixes:
|
||
|
Steven Rostedt (Google)
|
fff88fa0fb |
ring-buffer: Fix a race in rb_time_cmpxchg() for 32 bit archs
Mathieu Desnoyers pointed out an issue in the rb_time_cmpxchg() for 32 bit
architectures. That is:
static bool rb_time_cmpxchg(rb_time_t *t, u64 expect, u64 set)
{
unsigned long cnt, top, bottom, msb;
unsigned long cnt2, top2, bottom2, msb2;
u64 val;
/* The cmpxchg always fails if it interrupted an update */
if (!__rb_time_read(t, &val, &cnt2))
return false;
if (val != expect)
return false;
<<<< interrupted here!
cnt = local_read(&t->cnt);
The problem is that the synchronization counter in the rb_time_t is read
*after* the value of the timestamp is read. That means if an interrupt
were to come in between the value being read and the counter being read,
it can change the value and the counter and the interrupted process would
be clueless about it!
The counter needs to be read first and then the value. That way it is easy
to tell if the value is stale or not. If the counter hasn't been updated,
then the value is still good.
Link: https://lore.kernel.org/linux-trace-kernel/20231211201324.652870-1-mathieu.desnoyers@efficios.com/
Link: https://lore.kernel.org/linux-trace-kernel/20231212115301.7a9c9a64@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes:
|
||
|
Steven Rostedt (Google)
|
083e9f65bd |
ring-buffer: Remove useless update to write_stamp in rb_try_to_discard()
When filtering is enabled, a temporary buffer is created to place the
content of the trace event output so that the filter logic can decide
from the trace event output if the trace event should be filtered out or
not. If it is to be filtered out, the content in the temporary buffer is
simply discarded, otherwise it is written into the trace buffer.
But if an interrupt were to come in while a previous event was using that
temporary buffer, the event written by the interrupt would actually go
into the ring buffer itself to prevent corrupting the data on the
temporary buffer. If the event is to be filtered out, the event in the
ring buffer is discarded, or if it fails to discard because another event
were to have already come in, it is turned into padding.
The update to the write_stamp in the rb_try_to_discard() happens after a
fix was made to force the next event after the discard to use an absolute
timestamp by setting the before_stamp to zero so it does not match the
write_stamp (which causes an event to use the absolute timestamp).
But there's an effort in rb_try_to_discard() to put back the write_stamp
to what it was before the event was added. But this is useless and
wasteful because nothing is going to be using that write_stamp for
calculations as it still will not match the before_stamp.
Remove this useless update, and in doing so, we remove another
cmpxchg64()!
Also update the comments to reflect this change as well as remove some
extra white space in another comment.
Link: https://lore.kernel.org/linux-trace-kernel/20231215081810.1f4f38fe@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Fixes:
|
||
|
Steven Rostedt (Google)
|
dd93942570 |
ring-buffer: Do not try to put back write_stamp
If an update to an event is interrupted by another event between the time
the initial event allocated its buffer and where it wrote to the
write_stamp, the code try to reset the write stamp back to the what it had
just overwritten. It knows that it was overwritten via checking the
before_stamp, and if it didn't match what it wrote to the before_stamp
before it allocated its space, it knows it was overwritten.
To put back the write_stamp, it uses the before_stamp it read. The problem
here is that by writing the before_stamp to the write_stamp it makes the
two equal again, which means that the write_stamp can be considered valid
as the last timestamp written to the ring buffer. But this is not
necessarily true. The event that interrupted the event could have been
interrupted in a way that it was interrupted as well, and can end up
leaving with an invalid write_stamp. But if this happens and returns to
this context that uses the before_stamp to update the write_stamp again,
it can possibly incorrectly make it valid, causing later events to have in
correct time stamps.
As it is OK to leave this function with an invalid write_stamp (one that
doesn't match the before_stamp), there's no reason to try to make it valid
again in this case. If this race happens, then just leave with the invalid
write_stamp and the next event to come along will just add a absolute
timestamp and validate everything again.
Bonus points: This gets rid of another cmpxchg64!
Link: https://lore.kernel.org/linux-trace-kernel/20231214222921.193037a7@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Fixes:
|
||
|
Zheng Yejian
|
1cc111b9cd |
tracing: Fix uaf issue when open the hist or hist_debug file
KASAN report following issue. The root cause is when opening 'hist'
file of an instance and accessing 'trace_event_file' in hist_show(),
but 'trace_event_file' has been freed due to the instance being removed.
'hist_debug' file has the same problem. To fix it, call
tracing_{open,release}_file_tr() in file_operations callback to have
the ref count and avoid 'trace_event_file' being freed.
BUG: KASAN: slab-use-after-free in hist_show+0x11e0/0x1278
Read of size 8 at addr ffff242541e336b8 by task head/190
CPU: 4 PID: 190 Comm: head Not tainted 6.7.0-rc5-g26aff849438c #133
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x98/0xf8
show_stack+0x1c/0x30
dump_stack_lvl+0x44/0x58
print_report+0xf0/0x5a0
kasan_report+0x80/0xc0
__asan_report_load8_noabort+0x1c/0x28
hist_show+0x11e0/0x1278
seq_read_iter+0x344/0xd78
seq_read+0x128/0x1c0
vfs_read+0x198/0x6c8
ksys_read+0xf4/0x1e0
__arm64_sys_read+0x70/0xa8
invoke_syscall+0x70/0x260
el0_svc_common.constprop.0+0xb0/0x280
do_el0_svc+0x44/0x60
el0_svc+0x34/0x68
el0t_64_sync_handler+0xb8/0xc0
el0t_64_sync+0x168/0x170
Allocated by task 188:
kasan_save_stack+0x28/0x50
kasan_set_track+0x28/0x38
kasan_save_alloc_info+0x20/0x30
__kasan_slab_alloc+0x6c/0x80
kmem_cache_alloc+0x15c/0x4a8
trace_create_new_event+0x84/0x348
__trace_add_new_event+0x18/0x88
event_trace_add_tracer+0xc4/0x1a0
trace_array_create_dir+0x6c/0x100
trace_array_create+0x2e8/0x568
instance_mkdir+0x48/0x80
tracefs_syscall_mkdir+0x90/0xe8
vfs_mkdir+0x3c4/0x610
do_mkdirat+0x144/0x200
__arm64_sys_mkdirat+0x8c/0xc0
invoke_syscall+0x70/0x260
el0_svc_common.constprop.0+0xb0/0x280
do_el0_svc+0x44/0x60
el0_svc+0x34/0x68
el0t_64_sync_handler+0xb8/0xc0
el0t_64_sync+0x168/0x170
Freed by task 191:
kasan_save_stack+0x28/0x50
kasan_set_track+0x28/0x38
kasan_save_free_info+0x34/0x58
__kasan_slab_free+0xe4/0x158
kmem_cache_free+0x19c/0x508
event_file_put+0xa0/0x120
remove_event_file_dir+0x180/0x320
event_trace_del_tracer+0xb0/0x180
__remove_instance+0x224/0x508
instance_rmdir+0x44/0x78
tracefs_syscall_rmdir+0xbc/0x140
vfs_rmdir+0x1cc/0x4c8
do_rmdir+0x220/0x2b8
__arm64_sys_unlinkat+0xc0/0x100
invoke_syscall+0x70/0x260
el0_svc_common.constprop.0+0xb0/0x280
do_el0_svc+0x44/0x60
el0_svc+0x34/0x68
el0t_64_sync_handler+0xb8/0xc0
el0t_64_sync+0x168/0x170
Link: https://lore.kernel.org/linux-trace-kernel/20231214012153.676155-1-zhengyejian1@huawei.com
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
|
Steven Rostedt (Google)
|
60be76eeab |
tracing: Add size check when printing trace_marker output
If for some reason the trace_marker write does not have a nul byte for the string, it will overflow the print: trace_seq_printf(s, ": %s", field->buf); The field->buf could be missing the nul byte. To prevent overflow, add the max size that the buf can be by using the event size and the field location. int max = iter->ent_size - offsetof(struct print_entry, buf); trace_seq_printf(s, ": %*.s", max, field->buf); Link: https://lore.kernel.org/linux-trace-kernel/20231212084444.4619b8ce@gandalf.local.home Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Steven Rostedt (Google)
|
b049525855 |
ring-buffer: Have saved event hold the entire event
For the ring buffer iterator (non-consuming read), the event needs to be
copied into the iterator buffer to make sure that a writer does not
overwrite it while the user is reading it. If a write happens during the
copy, the buffer is simply discarded.
But the temp buffer itself was not big enough. The allocation of the
buffer was only BUF_MAX_DATA_SIZE, which is the maximum data size that can
be passed into the ring buffer and saved. But the temp buffer needs to
hold the meta data as well. That would be BUF_PAGE_SIZE and not
BUF_MAX_DATA_SIZE.
Link: https://lore.kernel.org/linux-trace-kernel/20231212072558.61f76493@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes:
|
||
|
Steven Rostedt (Google)
|
9e45e39dc2 |
ring-buffer: Do not update before stamp when switching sub-buffers
The ring buffer timestamps are synchronized by two timestamp placeholders.
One is the "before_stamp" and the other is the "write_stamp" (sometimes
referred to as the "after stamp" but only in the comments. These two
stamps are key to knowing how to handle nested events coming in with a
lockless system.
When moving across sub-buffers, the before stamp is updated but the write
stamp is not. There's an effort to put back the before stamp to something
that seems logical in case there's nested events. But as the current event
is about to cross sub-buffers, and so will any new nested event that happens,
updating the before stamp is useless, and could even introduce new race
conditions.
The first event on a sub-buffer simply uses the sub-buffer's timestamp
and keeps a "delta" of zero. The "before_stamp" and "write_stamp" are not
used in the algorithm in this case. There's no reason to try to fix the
before_stamp when this happens.
As a bonus, it removes a cmpxchg() when crossing sub-buffers!
Link: https://lore.kernel.org/linux-trace-kernel/20231211114420.36dde01b@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes:
|
||
|
Yuntao Wang
|
1dd11e9773 |
crash_core: fix the check for whether crashkernel is from high memory
If crash_base is equal to CRASH_ADDR_LOW_MAX, it also indicates that
the crashkernel memory is allocated from high memory. However, the
current check only considers the case where crash_base is greater than
CRASH_ADDR_LOW_MAX. Fix it.
The runtime effects is that crashkernel high memory is successfully
reserved, whereas the crashkernel low memory is bypassed in this case,
then kdump kernel bootup will fail because of no low memory under 4G.
This patch also includes some minor cleanups.
Link: https://lkml.kernel.org/r/20231209141438.77233-1-ytcoode@gmail.com
Fixes:
|
||
|
Ignat Korchagin
|
c41bd25141 |
kexec: drop dependency on ARCH_SUPPORTS_KEXEC from CRASH_DUMP
In commit f8ff23429c62 ("kernel/Kconfig.kexec: drop select of KEXEC for
CRASH_DUMP") we tried to fix a config regression, where CONFIG_CRASH_DUMP
required CONFIG_KEXEC.
However, it was not enough at least for arm64 platforms. While further
testing the patch with our arm64 config I noticed that CONFIG_CRASH_DUMP
is unavailable in menuconfig. This is because CONFIG_CRASH_DUMP still
depends on the new CONFIG_ARCH_SUPPORTS_KEXEC introduced in commit
|
||
|
Steven Rostedt (Google)
|
d06aff1cb1 |
tracing: Update snapshot buffer on resize if it is allocated
The snapshot buffer is to mimic the main buffer so that when a snapshot is
needed, the snapshot and main buffer are swapped. When the snapshot buffer
is allocated, it is set to the minimal size that the ring buffer may be at
and still functional. When it is allocated it becomes the same size as the
main ring buffer, and when the main ring buffer changes in size, it should
do.
Currently, the resize only updates the snapshot buffer if it's used by the
current tracer (ie. the preemptirqsoff tracer). But it needs to be updated
anytime it is allocated.
When changing the size of the main buffer, instead of looking to see if
the current tracer is utilizing the snapshot buffer, just check if it is
allocated to know if it should be updated or not.
Also fix typo in comment just above the code change.
Link: https://lore.kernel.org/linux-trace-kernel/20231210225447.48476a6a@rorschach.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes:
|
||
|
Steven Rostedt (Google)
|
17d8017581 |
ring-buffer: Fix memory leak of free page
Reading the ring buffer does a swap of a sub-buffer within the ring buffer
with a empty sub-buffer. This allows the reader to have full access to the
content of the sub-buffer that was swapped out without having to worry
about contention with the writer.
The readers call ring_buffer_alloc_read_page() to allocate a page that
will be used to swap with the ring buffer. When the code is finished with
the reader page, it calls ring_buffer_free_read_page(). Instead of freeing
the page, it stores it as a spare. Then next call to
ring_buffer_alloc_read_page() will return this spare instead of calling
into the memory management system to allocate a new page.
Unfortunately, on freeing of the ring buffer, this spare page is not
freed, and causes a memory leak.
Link: https://lore.kernel.org/linux-trace-kernel/20231210221250.7b9cc83c@rorschach.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes:
|
||
|
Steven Rostedt (Google)
|
b55b0a0d7c |
tracing: Have large events show up as '[LINE TOO BIG]' instead of nothing
If a large event was added to the ring buffer that is larger than what the
trace_seq can handle, it just drops the output:
~# cat /sys/kernel/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 2/2 #P:8
#
# _-----=> irqs-off/BH-disabled
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / _-=> migrate-disable
# |||| / delay
# TASK-PID CPU# ||||| TIMESTAMP FUNCTION
# | | | ||||| | |
<...>-859 [001] ..... 141.118951: tracing_mark_write <...>-859 [001] ..... 141.148201: tracing_mark_write: 78901234
Instead, catch this case and add some context:
~# cat /sys/kernel/tracing/trace
# tracer: nop
#
# entries-in-buffer/entries-written: 2/2 #P:8
#
# _-----=> irqs-off/BH-disabled
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / _-=> migrate-disable
# |||| / delay
# TASK-PID CPU# ||||| TIMESTAMP FUNCTION
# | | | ||||| | |
<...>-852 [001] ..... 121.550551: tracing_mark_write[LINE TOO BIG]
<...>-852 [001] ..... 121.550581: tracing_mark_write: 78901234
This now emulates the same output as trace_pipe.
Link: https://lore.kernel.org/linux-trace-kernel/20231209171058.78c1a026@gandalf.local.home
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
|
Steven Rostedt (Google)
|
b3ae7b67b8 |
ring-buffer: Fix writing to the buffer with max_data_size
The maximum ring buffer data size is the maximum size of data that can be recorded on the ring buffer. Events must be smaller than the sub buffer data size minus any meta data. This size is checked before trying to allocate from the ring buffer because the allocation assumes that the size will fit on the sub buffer. The maximum size was calculated as the size of a sub buffer page (which is currently PAGE_SIZE minus the sub buffer header) minus the size of the meta data of an individual event. But it missed the possible adding of a time stamp for events that are added long enough apart that the event meta data can't hold the time delta. When an event is added that is greater than the current BUF_MAX_DATA_SIZE minus the size of a time stamp, but still less than or equal to BUF_MAX_DATA_SIZE, the ring buffer would go into an infinite loop, looking for a page that can hold the event. Luckily, there's a check for this loop and after 1000 iterations and a warning is emitted and the ring buffer is disabled. But this should never happen. This can happen when a large event is added first, or after a long period where an absolute timestamp is prefixed to the event, increasing its size by 8 bytes. This passes the check and then goes into the algorithm that causes the infinite loop. For events that are the first event on the sub-buffer, it does not need to add a timestamp, because the sub-buffer itself contains an absolute timestamp, and adding one is redundant. The fix is to check if the event is to be the first event on the sub-buffer, and if it is, then do not add a timestamp. This also fixes 32 bit adding a timestamp when a read of before_stamp or write_stamp is interrupted. There's still no need to add that timestamp if the event is going to be the first event on the sub buffer. Also, if the buffer has "time_stamp_abs" set, then also check if the length plus the timestamp is greater than the BUF_MAX_DATA_SIZE. Link: https://lore.kernel.org/all/20231212104549.58863438@gandalf.local.home/ Link: https://lore.kernel.org/linux-trace-kernel/20231212071837.5fdd6c13@gandalf.local.home Link: https://lore.kernel.org/linux-trace-kernel/20231212111617.39e02849@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: |
||
|
Linus Torvalds
|
3a87498869 |
- Make sure tasks are thawed exactly and only once to avoid their state
getting corrupted -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmV1nDUACgkQEsHwGGHe VUqC3Q/9GF3IjEzKZAwTqw9ir2Nq9fFKkDZVT1ZCkXcg3bc6t5Dp68NcMPEoPdNE 6ONaEwKhZxqPyivI7u1ExdZnHYDMRWolZmjs/x19c+g3Zo6QzT+6blMdoWvl6nV2 RD3macPt5w5bcJ8ugSM4ekTQgo4nPU5VhBS52zDARx0W9ufpIk3YKmxmVQjhuV5J z/nfewUuUtAHDxnbF8pRvN8WoSg15Z5iERksdcj8Wagjx79cMAR6liuauJNkj9dP lldG69ODdJeZc9L/SUkLEgYPVaq+G6BOKgWXbzeiRM9LedHN3iQlT9JUttLHN383 NdTbQ6lboViP1O64WuoqJFVDYvY0DvVLUll4URywfT3lPbISGvxhg0Xj+4E8F5W9 A9pB9TDZwRXwrNuRLksaY0v/Glfo7eUr6252aDbgrUovJCDOwfRB+pI4ywpfoL/+ 2eKkJR1mUjoCXirkbYjcm7EhnTSKxiKmCYK7pyol3fJCsK/4bQF7mJ4UyDFIB3Na VXVD41KkMsaAdIQp4HbdduYaPSCQvQee6ahtobQwcxyBWGXRzurTw4ubHlzSeN9F fIfxF9PfSY+So2J9IrU1uYKPvfbUWfU3b1urQPhPvVlbVlZmfG579ek6+4bhagsg UztDRvv9lCxvBskruIMfelAduXsDkDi0UwJ0/TXlPnQGzYlDdeI= =07a8 -----END PGP SIGNATURE----- Merge tag 'sched_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Borislav Petkov: - Make sure tasks are thawed exactly and only once to avoid their state getting corrupted * tag 'sched_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: freezer,sched: Do not restore saved_state of a thawed task |
||
|
Linus Torvalds
|
537ccb5d28 |
- Make sure perf event size validation is done on every event in the
group -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmV1mfQACgkQEsHwGGHe VUrW9w/9EVMf1/cu1rY4XN68NbOgdfoic2oPan60WJwiYhYto9uA1quR4Q8ziwVh UbuO4e0up1ZCUzutZGFnx0ZHrlQIb0/YTQj8kDKX6m7g8s2Vers7YbkRwneDsNqA JDp58yGXdc1TipVYrKqa0leNrezvaEeoVFPIPKoelzi3673xrlslRseJ/n7vJd4u SnMjT7LQZIlEe/pecz01nHAo6SSwfI/Ynh2WSorHnhSTuE5gMUzJwBYSXvpZ2gyg 207keTiIcrvxgT+a32NMeEYsFFFvpYKFHI5nxxV1pB8AWXdWaNpuYHNItTDIh81D fSb8hu+EpNSWtZYzXl/esgULfMgHXez+4VknTpX/vsbfcV1Yif4aHlZP8tgP6gZ5 QyA2NMA5vJypjzLsAgCyZjpTyEVPYQ3f4+iYg4EGlMlgLgoXtHIV+zP765SzDVkC yPO4xVf+Ypo9AKcGKjBrxyMlRq40zos40k6l2yOjSUlTE2IfOLMhjgVHeLcgD+uv E9pi0/KtfGvrm3nWgIhDtcvd5Jg6vrilaRWl9bAN6g6xgaqLPXuIZbOjPaRpKSNa L32XBMg5fUt4eesZv458qu4Zw1ybHCd6qoe3OieFzW5ocR61O946MHX3kkbpmsWC PzH1mBsPa3F8/utJ06p+9pank3M5yKHdkDPQXfSvImuZ3DPKEGI= =QxHj -----END PGP SIGNATURE----- Merge tag 'perf_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf event fix from Borislav Petkov: - Make sure perf event size validation is done on every event in the group * tag 'perf_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix perf_event_validate_size() |
||
|
Linus Torvalds
|
17894c2a7a |
tracing fixes for v6.7-rc4:
- Snapshot buffer issues
1. When instances started allowing latency tracers, it uses
a snapshot buffer (another buffer that is not written to
but swapped with the main buffer that is). The snapshot buffer
needs to be the same size as the main buffer. But when the
snapshot buffers were added to instances, the code to make
the snapshot equal to the main buffer still was only doing it
for the main buffer and not the instances.
2. Need to stop the current tracer when resizing the buffers.
Otherwise there can be a race if the tracer decides to make
a snapshot between resizing the main buffer and the snapshot
buffer.
3. When a tracer is "stopped" in disables both the main buffer
and the snapshot buffer. This needs to be done for instances
and not only the main buffer, now that instances also have
a snapshot buffer.
- Buffered event for filtering issues
When filtering is enabled, because events can be dropped often,
it is quicker to copy the event into a temp buffer and write that
into the main buffer if it is not filtered or just drop the event
if it is, than to write the event into the ring buffer and then
try to discard it. This temp buffer is allocated and needs special
synchronization to do so. But there were some issues with that:
1. When disabling the filter and freeing the buffer, a call to all
CPUs is required to stop each per_cpu usage. But the code
called smp_call_function_many() which does not include the
current CPU. If the task is migrated to another CPU when it
enables the CPUs via smp_call_function_many(), it will not enable
the one it is currently on and this causes issues later on.
Use on_each_cpu_mask() instead, which includes the current CPU.
2. When the allocation of the buffered event fails, it can give
a warning. But the buffered event is just an optimization
(it's still OK to write to the ring buffer and free it).
Do not WARN in this case.
3. The freeing of the buffer event requires synchronization.
First a counter is decremented to zero so that no new uses
of it will happen. Then it sets the buffered event to NULL,
and finally it frees the buffered event. There's a synchronize_rcu()
between the counter decrement and the setting the variable to
NULL, but only a smp_wmb() between that and the freeing of the
buffer. It is theoretically possible that a user missed seeing
the decrement, but will use the buffer after it is free. Another
synchronize_rcu() is needed in place of that smp_wmb().
- ring buffer timestamps on 32 bit machines
The ring buffer timestamp on 32 bit machines has to break the 64 bit
number into multiple values as cmpxchg is required on it, and a
64 bit cmpxchg on 32 bit architectures is very slow. The code use
to just use two 32 bit values and make it a 60 bit timestamp where
the other 4 bits were used as counters for synchronization. It later
came known that the timestamp on 32 bit still need all 64 bits in
some cases. So 3 words were created to handle the 64 bits. But issues
arised with this:
1. The synchronization logic still only compared the counter
with the first two, but not with the third number, so the
synchronization could fail unknowingly.
2. A check on discard of an event could race if an event happened
between the discard and updating one of the counters. The
counter needs to be updated (forcing an absolute timestamp
and not to use a delta) before the actual discard happens.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZXIP5hQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmJxAQDXBZwBUFQjWqZHLJn0S9aaz5FggkeR
RmlsOMND0PXcjwD+N6U905i553ehu3SSyOP+5svoi0hyCB2qhj3ZF0LzZQU=
=us1V
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Snapshot buffer issues:
1. When instances started allowing latency tracers, it uses a
snapshot buffer (another buffer that is not written to but swapped
with the main buffer that is). The snapshot buffer needs to be the
same size as the main buffer. But when the snapshot buffers were
added to instances, the code to make the snapshot equal to the
main buffer still was only doing it for the main buffer and not
the instances.
2. Need to stop the current tracer when resizing the buffers.
Otherwise there can be a race if the tracer decides to make a
snapshot between resizing the main buffer and the snapshot buffer.
3. When a tracer is "stopped" in disables both the main buffer and
the snapshot buffer. This needs to be done for instances and not
only the main buffer, now that instances also have a snapshot
buffer.
- Buffered event for filtering issues:
When filtering is enabled, because events can be dropped often, it is
quicker to copy the event into a temp buffer and write that into the
main buffer if it is not filtered or just drop the event if it is,
than to write the event into the ring buffer and then try to discard
it. This temp buffer is allocated and needs special synchronization
to do so. But there were some issues with that:
1. When disabling the filter and freeing the buffer, a call to all
CPUs is required to stop each per_cpu usage. But the code called
smp_call_function_many() which does not include the current CPU.
If the task is migrated to another CPU when it enables the CPUs
via smp_call_function_many(), it will not enable the one it is
currently on and this causes issues later on. Use
on_each_cpu_mask() instead, which includes the current CPU.
2.When the allocation of the buffered event fails, it can give a
warning. But the buffered event is just an optimization (it's
still OK to write to the ring buffer and free it). Do not WARN in
this case.
3.The freeing of the buffer event requires synchronization. First a
counter is decremented to zero so that no new uses of it will
happen. Then it sets the buffered event to NULL, and finally it
frees the buffered event. There's a synchronize_rcu() between the
counter decrement and the setting the variable to NULL, but only a
smp_wmb() between that and the freeing of the buffer. It is
theoretically possible that a user missed seeing the decrement,
but will use the buffer after it is free. Another
synchronize_rcu() is needed in place of that smp_wmb().
- ring buffer timestamps on 32 bit machines
The ring buffer timestamp on 32 bit machines has to break the 64 bit
number into multiple values as cmpxchg is required on it, and a 64
bit cmpxchg on 32 bit architectures is very slow. The code use to
just use two 32 bit values and make it a 60 bit timestamp where the
other 4 bits were used as counters for synchronization. It later came
known that the timestamp on 32 bit still need all 64 bits in some
cases. So 3 words were created to handle the 64 bits. But issues
arised with this:
1. The synchronization logic still only compared the counter with
the first two, but not with the third number, so the
synchronization could fail unknowingly.
2. A check on discard of an event could race if an event happened
between the discard and updating one of the counters. The counter
needs to be updated (forcing an absolute timestamp and not to use
a delta) before the actual discard happens.
* tag 'trace-v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Test last update in 32bit version of __rb_time_read()
ring-buffer: Force absolute timestamp on discard of event
tracing: Fix a possible race when disabling buffered events
tracing: Fix a warning when allocating buffered events fails
tracing: Fix incomplete locking when disabling buffered events
tracing: Disable snapshot buffer when stopping instance tracers
tracing: Stop current tracer when resizing buffer
tracing: Always update snapshot buffer size
|
||
|
Linus Torvalds
|
8e819a7623 |
31 hotfixes. 10 of these address pre-6.6 issues and are marked cc:stable.
The remainder address post-6.6 issues or aren't considered serious enough to justify backporting. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZXKEfwAKCRDdBJ7gKXxA jlRpAQCiAp1nSqIz/fOKTzoQRaTDXU/m+C+6ZAXdKLDfvQBhpwEAnxxjZ8IgF+8Z Klz/GirHX5w5o7jE2wb8iObo1nR75Qo= =omRq -----END PGP SIGNATURE----- Merge tag 'mm-hotfixes-stable-2023-12-07-18-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "31 hotfixes. Ten of these address pre-6.6 issues and are marked cc:stable. The remainder address post-6.6 issues or aren't considered serious enough to justify backporting" * tag 'mm-hotfixes-stable-2023-12-07-18-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits) mm/madvise: add cond_resched() in madvise_cold_or_pageout_pte_range() nilfs2: prevent WARNING in nilfs_sufile_set_segment_usage() mm/hugetlb: have CONFIG_HUGETLB_PAGE select CONFIG_XARRAY_MULTI scripts/gdb: fix lx-device-list-bus and lx-device-list-class MAINTAINERS: drop Antti Palosaari highmem: fix a memory copy problem in memcpy_from_folio nilfs2: fix missing error check for sb_set_blocksize call kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP units: add missing header drivers/base/cpu: crash data showing should depends on KEXEC_CORE mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions scripts/gdb/tasks: fix lx-ps command error mm/Kconfig: make userfaultfd a menuconfig selftests/mm: prevent duplicate runs caused by TEST_GEN_PROGS mm/damon/core: copy nr_accesses when splitting region lib/group_cpus.c: avoid acquiring cpu hotplug lock in group_cpus_evenly checkstack: fix printed address mm/memory_hotplug: fix error handling in add_memory_resource() mm/memory_hotplug: add missing mem_hotplug_lock .mailmap: add a new address mapping for Chester Lin ... |
||
|
Linus Torvalds
|
5e3f5b81de |
Including fixes from bpf and netfilter.
Current release - regressions:
- veth: fix packet segmentation in veth_convert_skb_to_xdp_buff
Current release - new code bugs:
- tcp: assorted fixes to the new Auth Option support
Older releases - regressions:
- tcp: fix mid stream window clamp
- tls: fix incorrect splice handling
- ipv4: ip_gre: handle skb_pull() failure in ipgre_xmit()
- dsa: mv88e6xxx: restore USXGMII support for 6393X
- arcnet: restore support for multiple Sohard Arcnet cards
Older releases - always broken:
- tcp: do not accept ACK of bytes we never sent
- require admin privileges to receive packet traces via netlink
- packet: move reference count in packet_sock to atomic_long_t
- bpf:
- fix incorrect branch offset comparison with cpu=v4
- fix prog_array_map_poke_run map poke update
- netfilter:
- 3 fixes for crashes on bad admin commands
- xt_owner: fix race accessing sk->sk_socket, TOCTOU null-deref
- nf_tables: fix 'exist' matching on bigendian arches
- leds: netdev: fix RTNL handling to prevent potential deadlock
- eth: tg3: prevent races in error/reset handling
- eth: r8169: fix rtl8125b PAUSE storm when suspended
- eth: r8152: improve reset and surprise removal handling
- eth: hns: fix race between changing features and sending
- eth: nfp: fix sleep in atomic for bonding offload
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bkyC
-----END PGP SIGNATURE-----
Merge tag 'net-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - regressions:
- veth: fix packet segmentation in veth_convert_skb_to_xdp_buff
Current release - new code bugs:
- tcp: assorted fixes to the new Auth Option support
Older releases - regressions:
- tcp: fix mid stream window clamp
- tls: fix incorrect splice handling
- ipv4: ip_gre: handle skb_pull() failure in ipgre_xmit()
- dsa: mv88e6xxx: restore USXGMII support for 6393X
- arcnet: restore support for multiple Sohard Arcnet cards
Older releases - always broken:
- tcp: do not accept ACK of bytes we never sent
- require admin privileges to receive packet traces via netlink
- packet: move reference count in packet_sock to atomic_long_t
- bpf:
- fix incorrect branch offset comparison with cpu=v4
- fix prog_array_map_poke_run map poke update
- netfilter:
- three fixes for crashes on bad admin commands
- xt_owner: fix race accessing sk->sk_socket, TOCTOU null-deref
- nf_tables: fix 'exist' matching on bigendian arches
- leds: netdev: fix RTNL handling to prevent potential deadlock
- eth: tg3: prevent races in error/reset handling
- eth: r8169: fix rtl8125b PAUSE storm when suspended
- eth: r8152: improve reset and surprise removal handling
- eth: hns: fix race between changing features and sending
- eth: nfp: fix sleep in atomic for bonding offload"
* tag 'net-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
vsock/virtio: fix "comparison of distinct pointer types lacks a cast" warning
net/smc: fix missing byte order conversion in CLC handshake
net: dsa: microchip: provide a list of valid protocols for xmit handler
drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group
psample: Require 'CAP_NET_ADMIN' when joining "packets" group
bpf: sockmap, updating the sg structure should also update curr
net: tls, update curr on splice as well
nfp: flower: fix for take a mutex lock in soft irq context and rcu lock
net: dsa: mv88e6xxx: Restore USXGMII support for 6393X
tcp: do not accept ACK of bytes we never sent
selftests/bpf: Add test for early update in prog_array_map_poke_run
bpf: Fix prog_array_map_poke_run map poke update
netfilter: xt_owner: Fix for unsafe access of sk->sk_socket
netfilter: nf_tables: validate family when identifying table via handle
netfilter: nf_tables: bail out on mismatching dynset and set expressions
netfilter: nf_tables: fix 'exist' matching on bigendian arches
netfilter: nft_set_pipapo: skip inactive elements during set walk
netfilter: bpf: fix bad registration on nf_defrag
leds: trigger: netdev: fix RTNL handling to prevent potential deadlock
octeontx2-af: Update Tx link register range
...
|
||
|
Linus Torvalds
|
9ace34a8e4 |
cgroup: Fixes for v6.7-rc4
Just one patch. |
||
|
Linus Torvalds
|
e0348c1f68 |
workqueue: Fixes for v6.7-rc4
Just one patch to fix a bug which can crash the kernel if the housekeeping and wq_unbound_cpu cpumask configuration combination leaves the latter empty. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZXDKTg4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGTmMAP9kuC9JkII2J5JnxQpkJLDd/qeRHrigrClx3F0+ gBiK8AD/XgsGY5J/OOMjsU1Px7BYvy6w0MEEqqhx2vOVEkEFPAo= =pH9n -----END PGP SIGNATURE----- Merge tag 'wq-for-6.7-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fix from Tejun Heo: "Just one patch to fix a bug which can crash the kernel if the housekeeping and wq_unbound_cpu cpumask configuration combination leaves the latter empty" * tag 'wq-for-6.7-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Make sure that wq_unbound_cpumask is never empty |
||
|
Andrew Morton
|
0c92218f4e | Merge branch 'master' into mm-hotfixes-stable | ||
|
Baoquan He
|
dccf78d39f |
kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP
Ignat Korchagin complained that a potential config regression was introduced by commit |
||
|
Jiri Olsa
|
4b7de80160 |
bpf: Fix prog_array_map_poke_run map poke update
Lee pointed out issue found by syscaller [0] hitting BUG in prog array
map poke update in prog_array_map_poke_run function due to error value
returned from bpf_arch_text_poke function.
There's race window where bpf_arch_text_poke can fail due to missing
bpf program kallsym symbols, which is accounted for with check for
-EINVAL in that BUG_ON call.
The problem is that in such case we won't update the tail call jump
and cause imbalance for the next tail call update check which will
fail with -EBUSY in bpf_arch_text_poke.
I'm hitting following race during the program load:
CPU 0 CPU 1
bpf_prog_load
bpf_check
do_misc_fixups
prog_array_map_poke_track
map_update_elem
bpf_fd_array_map_update_elem
prog_array_map_poke_run
bpf_arch_text_poke returns -EINVAL
bpf_prog_kallsyms_add
After bpf_arch_text_poke (CPU 1) fails to update the tail call jump, the next
poke update fails on expected jump instruction check in bpf_arch_text_poke
with -EBUSY and triggers the BUG_ON in prog_array_map_poke_run.
Similar race exists on the program unload.
Fixing this by moving the update to bpf_arch_poke_desc_update function which
makes sure we call __bpf_arch_text_poke that skips the bpf address check.
Each architecture has slightly different approach wrt looking up bpf address
in bpf_arch_text_poke, so instead of splitting the function or adding new
'checkip' argument in previous version, it seems best to move the whole
map_poke_run update as arch specific code.
[0] https://syzkaller.appspot.com/bug?extid=97a4fe20470e9bc30810
Fixes:
|
||
|
Steven Rostedt (Google)
|
f458a14534 |
ring-buffer: Test last update in 32bit version of __rb_time_read()
Since 64 bit cmpxchg() is very expensive on 32bit architectures, the
timestamp used by the ring buffer does some interesting tricks to be able
to still have an atomic 64 bit number. It originally just used 60 bits and
broke it up into two 32 bit words where the extra 2 bits were used for
synchronization. But this was not enough for all use cases, and all 64
bits were required.
The 32bit version of the ring buffer timestamp was then broken up into 3
32bit words using the same counter trick. But one update was not done. The
check to see if the read operation was done without interruption only
checked the first two words and not last one (like it had before this
update). Fix it by making sure all three updates happen without
interruption by comparing the initial counter with the last updated
counter.
Link: https://lore.kernel.org/linux-trace-kernel/20231206100050.3100b7bb@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes:
|
||
|
Steven Rostedt (Google)
|
b2dd797543 |
ring-buffer: Force absolute timestamp on discard of event
There's a race where if an event is discarded from the ring buffer and an
interrupt were to happen at that time and insert an event, the time stamp
is still used from the discarded event as an offset. This can screw up the
timings.
If the event is going to be discarded, set the "before_stamp" to zero.
When a new event comes in, it compares the "before_stamp" with the
"write_stamp" and if they are not equal, it will insert an absolute
timestamp. This will prevent the timings from getting out of sync due to
the discarded event.
Link: https://lore.kernel.org/linux-trace-kernel/20231206100244.5130f9b3@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes:
|
||
|
Petr Pavlu
|
c0591b1ccc |
tracing: Fix a possible race when disabling buffered events
Function trace_buffered_event_disable() is responsible for freeing pages
backing buffered events and this process can run concurrently with
trace_event_buffer_lock_reserve().
The following race is currently possible:
* Function trace_buffered_event_disable() is called on CPU 0. It
increments trace_buffered_event_cnt on each CPU and waits via
synchronize_rcu() for each user of trace_buffered_event to complete.
* After synchronize_rcu() is finished, function
trace_buffered_event_disable() has the exclusive access to
trace_buffered_event. All counters trace_buffered_event_cnt are at 1
and all pointers trace_buffered_event are still valid.
* At this point, on a different CPU 1, the execution reaches
trace_event_buffer_lock_reserve(). The function calls
preempt_disable_notrace() and only now enters an RCU read-side
critical section. The function proceeds and reads a still valid
pointer from trace_buffered_event[CPU1] into the local variable
"entry". However, it doesn't yet read trace_buffered_event_cnt[CPU1]
which happens later.
* Function trace_buffered_event_disable() continues. It frees
trace_buffered_event[CPU1] and decrements
trace_buffered_event_cnt[CPU1] back to 0.
* Function trace_event_buffer_lock_reserve() continues. It reads and
increments trace_buffered_event_cnt[CPU1] from 0 to 1. This makes it
believe that it can use the "entry" that it already obtained but the
pointer is now invalid and any access results in a use-after-free.
Fix the problem by making a second synchronize_rcu() call after all
trace_buffered_event values are set to NULL. This waits on all potential
users in trace_event_buffer_lock_reserve() that still read a previous
pointer from trace_buffered_event.
Link: https://lore.kernel.org/all/20231127151248.7232-2-petr.pavlu@suse.com/
Link: https://lkml.kernel.org/r/20231205161736.19663-4-petr.pavlu@suse.com
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Petr Pavlu
|
34209fe83e |
tracing: Fix a warning when allocating buffered events fails
Function trace_buffered_event_disable() produces an unexpected warning
when the previous call to trace_buffered_event_enable() fails to
allocate pages for buffered events.
The situation can occur as follows:
* The counter trace_buffered_event_ref is at 0.
* The soft mode gets enabled for some event and
trace_buffered_event_enable() is called. The function increments
trace_buffered_event_ref to 1 and starts allocating event pages.
* The allocation fails for some page and trace_buffered_event_disable()
is called for cleanup.
* Function trace_buffered_event_disable() decrements
trace_buffered_event_ref back to 0, recognizes that it was the last
use of buffered events and frees all allocated pages.
* The control goes back to trace_buffered_event_enable() which returns.
The caller of trace_buffered_event_enable() has no information that
the function actually failed.
* Some time later, the soft mode is disabled for the same event.
Function trace_buffered_event_disable() is called. It warns on
"WARN_ON_ONCE(!trace_buffered_event_ref)" and returns.
Buffered events are just an optimization and can handle failures. Make
trace_buffered_event_enable() exit on the first failure and left any
cleanup later to when trace_buffered_event_disable() is called.
Link: https://lore.kernel.org/all/20231127151248.7232-2-petr.pavlu@suse.com/
Link: https://lkml.kernel.org/r/20231205161736.19663-3-petr.pavlu@suse.com
Fixes:
|
||
|
Petr Pavlu
|
7fed14f7ac |
tracing: Fix incomplete locking when disabling buffered events
The following warning appears when using buffered events: [ 203.556451] WARNING: CPU: 53 PID: 10220 at kernel/trace/ring_buffer.c:3912 ring_buffer_discard_commit+0x2eb/0x420 [...] [ 203.670690] CPU: 53 PID: 10220 Comm: stress-ng-sysin Tainted: G E 6.7.0-rc2-default #4 56e6d0fcf5581e6e51eaaecbdaec2a2338c80f3a [ 203.670704] Hardware name: Intel Corp. GROVEPORT/GROVEPORT, BIOS GVPRCRB1.86B.0016.D04.1705030402 05/03/2017 [ 203.670709] RIP: 0010:ring_buffer_discard_commit+0x2eb/0x420 [ 203.735721] Code: 4c 8b 4a 50 48 8b 42 48 49 39 c1 0f 84 b3 00 00 00 49 83 e8 01 75 b1 48 8b 42 10 f0 ff 40 08 0f 0b e9 fc fe ff ff f0 ff 47 08 <0f> 0b e9 77 fd ff ff 48 8b 42 10 f0 ff 40 08 0f 0b e9 f5 fe ff ff [ 203.735734] RSP: 0018:ffffb4ae4f7b7d80 EFLAGS: 00010202 [ 203.735745] RAX: 0000000000000000 RBX: ffffb4ae4f7b7de0 RCX: ffff8ac10662c000 [ 203.735754] RDX: ffff8ac0c750be00 RSI: ffff8ac10662c000 RDI: ffff8ac0c004d400 [ 203.781832] RBP: ffff8ac0c039cea0 R08: 0000000000000000 R09: 0000000000000000 [ 203.781839] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 203.781842] R13: ffff8ac10662c000 R14: ffff8ac0c004d400 R15: ffff8ac10662c008 [ 203.781846] FS: 00007f4cd8a67740(0000) GS:ffff8ad798880000(0000) knlGS:0000000000000000 [ 203.781851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 203.781855] CR2: 0000559766a74028 CR3: 00000001804c4000 CR4: 00000000001506f0 [ 203.781862] Call Trace: [ 203.781870] <TASK> [ 203.851949] trace_event_buffer_commit+0x1ea/0x250 [ 203.851967] trace_event_raw_event_sys_enter+0x83/0xe0 [ 203.851983] syscall_trace_enter.isra.0+0x182/0x1a0 [ 203.851990] do_syscall_64+0x3a/0xe0 [ 203.852075] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 203.852090] RIP: 0033:0x7f4cd870fa77 [ 203.982920] Code: 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 90 b8 89 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e9 43 0e 00 f7 d8 64 89 01 48 [ 203.982932] RSP: 002b:00007fff99717dd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000089 [ 203.982942] RAX: ffffffffffffffda RBX: 0000558ea1d7b6f0 RCX: 00007f4cd870fa77 [ 203.982948] RDX: 0000000000000000 RSI: 00007fff99717de0 RDI: 0000558ea1d7b6f0 [ 203.982957] RBP: 00007fff99717de0 R08: 00007fff997180e0 R09: 00007fff997180e0 [ 203.982962] R10: 00007fff997180e0 R11: 0000000000000246 R12: 00007fff99717f40 [ 204.049239] R13: 00007fff99718590 R14: 0000558e9f2127a8 R15: 00007fff997180b0 [ 204.049256] </TASK> For instance, it can be triggered by running these two commands in parallel: $ while true; do echo hist:key=id.syscall:val=hitcount > \ /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/trigger; done $ stress-ng --sysinfo $(nproc) The warning indicates that the current ring_buffer_per_cpu is not in the committing state. It happens because the active ring_buffer_event doesn't actually come from the ring_buffer_per_cpu but is allocated from trace_buffered_event. The bug is in function trace_buffered_event_disable() where the following normally happens: * The code invokes disable_trace_buffered_event() via smp_call_function_many() and follows it by synchronize_rcu(). This increments the per-CPU variable trace_buffered_event_cnt on each target CPU and grants trace_buffered_event_disable() the exclusive access to the per-CPU variable trace_buffered_event. * Maintenance is performed on trace_buffered_event, all per-CPU event buffers get freed. * The code invokes enable_trace_buffered_event() via smp_call_function_many(). This decrements trace_buffered_event_cnt and releases the access to trace_buffered_event. A problem is that smp_call_function_many() runs a given function on all target CPUs except on the current one. The following can then occur: * Task X executing trace_buffered_event_disable() runs on CPU 0. * The control reaches synchronize_rcu() and the task gets rescheduled on another CPU 1. * The RCU synchronization finishes. At this point, trace_buffered_event_disable() has the exclusive access to all trace_buffered_event variables except trace_buffered_event[CPU0] because trace_buffered_event_cnt[CPU0] is never incremented and if the buffer is currently unused, remains set to 0. * A different task Y is scheduled on CPU 0 and hits a trace event. The code in trace_event_buffer_lock_reserve() sees that trace_buffered_event_cnt[CPU0] is set to 0 and decides the use the buffer provided by trace_buffered_event[CPU0]. * Task X continues its execution in trace_buffered_event_disable(). The code incorrectly frees the event buffer pointed by trace_buffered_event[CPU0] and resets the variable to NULL. * Task Y writes event data to the now freed buffer and later detects the created inconsistency. The issue is observable since commit |
||
|
Steven Rostedt (Google)
|
b538bf7d0e |
tracing: Disable snapshot buffer when stopping instance tracers
It use to be that only the top level instance had a snapshot buffer (for
latency tracers like wakeup and irqsoff). When stopping a tracer in an
instance would not disable the snapshot buffer. This could have some
unintended consequences if the irqsoff tracer is enabled.
Consolidate the tracing_start/stop() with tracing_start/stop_tr() so that
all instances behave the same. The tracing_start/stop() functions will
just call their respective tracing_start/stop_tr() with the global_array
passed in.
Link: https://lkml.kernel.org/r/20231205220011.041220035@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes:
|
||
|
Steven Rostedt (Google)
|
d78ab79270 |
tracing: Stop current tracer when resizing buffer
When the ring buffer is being resized, it can cause side effects to the
running tracer. For instance, there's a race with irqsoff tracer that
swaps individual per cpu buffers between the main buffer and the snapshot
buffer. The resize operation modifies the main buffer and then the
snapshot buffer. If a swap happens in between those two operations it will
break the tracer.
Simply stop the running tracer before resizing the buffers and enable it
again when finished.
Link: https://lkml.kernel.org/r/20231205220010.748996423@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes:
|
||
|
Steven Rostedt (Google)
|
7be76461f3 |
tracing: Always update snapshot buffer size
It use to be that only the top level instance had a snapshot buffer (for
latency tracers like wakeup and irqsoff). The update of the ring buffer
size would check if the instance was the top level and if so, it would
also update the snapshot buffer as it needs to be the same as the main
buffer.
Now that lower level instances also has a snapshot buffer, they too need
to update their snapshot buffer sizes when the main buffer is changed,
otherwise the following can be triggered:
# cd /sys/kernel/tracing
# echo 1500 > buffer_size_kb
# mkdir instances/foo
# echo irqsoff > instances/foo/current_tracer
# echo 1000 > instances/foo/buffer_size_kb
Produces:
WARNING: CPU: 2 PID: 856 at kernel/trace/trace.c:1938 update_max_tr_single.part.0+0x27d/0x320
Which is:
ret = ring_buffer_swap_cpu(tr->max_buffer.buffer, tr->array_buffer.buffer, cpu);
if (ret == -EBUSY) {
[..]
}
WARN_ON_ONCE(ret && ret != -EAGAIN && ret != -EBUSY); <== here
That's because ring_buffer_swap_cpu() has:
int ret = -EINVAL;
[..]
/* At least make sure the two buffers are somewhat the same */
if (cpu_buffer_a->nr_pages != cpu_buffer_b->nr_pages)
goto out;
[..]
out:
return ret;
}
Instead, update all instances' snapshot buffer sizes when their main
buffer size is updated.
Link: https://lkml.kernel.org/r/20231205220010.454662151@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes:
|
||
|
Linus Torvalds
|
669fc83452 |
Probes fixes for v6.7-r3:
- objpool: Fix objpool overrun case on memory/cache access delay especially on the big.LITTLE SoC. The objpool uses a copy of object slot index internal loop, but the slot index can be changed on another processor in parallel. In that case, the difference of 'head' local copy and the 'slot->last' index will be bigger than local slot size. In that case, we need to re-read the slot::head to update it. - kretprobe: Fix to use appropriate rcu API for kretprobe holder. Since kretprobe_holder::rp is RCU managed, it should use rcu_assign_pointer() and rcu_dereference_check() correctly. Also adding __rcu tag for finding wrong usage by sparse. - rethook: Fix to use appropriate rcu API for rethook::handler. The same as kretprobe, rethook::handler is RCU managed and it should use rcu_assign_pointer() and rcu_dereference_check(). This also adds __rcu tag for finding wrong usage by sparse. -----BEGIN PGP SIGNATURE----- iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmVpfBobHG1hc2FtaS5o aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bNyMIAJSLICKQNuFiBJEn/rty ACWJ9QMOnwi0DoVaepG/m9QJh6AIUUFW4//9helmSm0GIVzxQ2+f8UeKU+sYiVtH ro9atea4W4+FMTvtEB1cU8oG5CDVT4WQdUXbjMktqYe3+WB8Zt8+fIP0mnbTFAVr yStpliGPecmlupJVRYqrJGyDdbkUxXxVlPsP/eDrHFgbBWv8Incw0f+MLGSi6LSE sZ1MaKCdi2tlHbtD/fiowfLoBMZwQAKY4hq/XguVsWh+BGaGUgwtif+8ESwPeu22 KEZLyWDQ1N8XBHyOBotV7vsBEwh6LKtLGVXIBsO4KxVyGw6msxWBis0dt/tkn+kk LEg= =B9WK -----END PGP SIGNATURE----- Merge tag 'probes-fixes-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fixes from Masami Hiramatsu: - objpool: Fix objpool overrun case on memory/cache access delay especially on the big.LITTLE SoC. The objpool uses a copy of object slot index internal loop, but the slot index can be changed on another processor in parallel. In that case, the difference of 'head' local copy and the 'slot->last' index will be bigger than local slot size. In that case, we need to re-read the slot::head to update it. - kretprobe: Fix to use appropriate rcu API for kretprobe holder. Since kretprobe_holder::rp is RCU managed, it should use rcu_assign_pointer() and rcu_dereference_check() correctly. Also adding __rcu tag for finding wrong usage by sparse. - rethook: Fix to use appropriate rcu API for rethook::handler. The same as kretprobe, rethook::handler is RCU managed and it should use rcu_assign_pointer() and rcu_dereference_check(). This also adds __rcu tag for finding wrong usage by sparse. * tag 'probes-fixes-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: rethook: Use __rcu pointer for rethook::handler kprobes: consistent rcu api usage for kretprobe holder lib: objpool: fix head overrun on RK3588 SBC |
||
|
Yonghong Song
|
dfce9cb314 |
bpf: Fix a verifier bug due to incorrect branch offset comparison with cpu=v4
Bpf cpu=v4 support is introduced in [1] and Commit |
||
|
Masami Hiramatsu (Google)
|
a1461f1fd6 |
rethook: Use __rcu pointer for rethook::handler
Since the rethook::handler is an RCU-maganged pointer so that it will
notice readers the rethook is stopped (unregistered) or not, it should
be an __rcu pointer and use appropriate functions to be accessed. This
will use appropriate memory barrier when accessing it. OTOH,
rethook::data is never changed, so we don't need to check it in
get_kretprobe().
NOTE: To avoid sparse warning, rethook::handler is defined by a raw
function pointer type with __rcu instead of rethook_handler_t.
Link: https://lore.kernel.org/all/170126066201.398836.837498688669005979.stgit@devnote2/
Fixes:
|
||
|
JP Kobryn
|
d839a656d0 |
kprobes: consistent rcu api usage for kretprobe holder
It seems that the pointer-to-kretprobe "rp" within the kretprobe_holder is
RCU-managed, based on the (non-rethook) implementation of get_kretprobe().
The thought behind this patch is to make use of the RCU API where possible
when accessing this pointer so that the needed barriers are always in place
and to self-document the code.
The __rcu annotation to "rp" allows for sparse RCU checking. Plain writes
done to the "rp" pointer are changed to make use of the RCU macro for
assignment. For the single read, the implementation of get_kretprobe()
is simplified by making use of an RCU macro which accomplishes the same,
but note that the log warning text will be more generic.
I did find that there is a difference in assembly generated between the
usage of the RCU macros vs without. For example, on arm64, when using
rcu_assign_pointer(), the corresponding store instruction is a
store-release (STLR) which has an implicit barrier. When normal assignment
is done, a regular store (STR) is found. In the macro case, this seems to
be a result of rcu_assign_pointer() using smp_store_release() when the
value to write is not NULL.
Link: https://lore.kernel.org/all/20231122132058.3359-1-inwardvessel@gmail.com/
Fixes:
|
||
|
Linus Torvalds
|
6172a5180f |
Including fixes from bpf and wifi.
Current release - regressions:
- neighbour: fix __randomize_layout crash in struct neighbour
- r8169: fix deadlock on RTL8125 in jumbo mtu mode
Previous releases - regressions:
- wifi:
- mac80211: fix warning at station removal time
- cfg80211: fix CQM for non-range use
- tools: ynl-gen: fix unexpected response handling
- octeontx2-af: fix possible buffer overflow
- dpaa2: recycle the RX buffer only after all processing done
- rswitch: fix missing dev_kfree_skb_any() in error path
Previous releases - always broken:
- ipv4: fix uaf issue when receiving igmp query packet
- wifi: mac80211: fix debugfs deadlock at device removal time
- bpf:
- sockmap: af_unix stream sockets need to hold ref for pair sock
- netdevsim: don't accept device bound programs
- selftests: fix a char signedness issue
- dsa: mv88e6xxx: fix marvell 6350 probe crash
- octeontx2-pf: restore TC ingress police rules when interface is up
- wangxun: fix memory leak on msix entry
- ravb: keep reverse order of operations in ravb_remove()
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmVobzISHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOk4rwP/2qaUstOJVpkO8cG+bRYi3idH9uO/8Yu
dYgFI4LM826YgbVNVzuiu9Sh7t78dbep/fWQ2quDuZUinWtPmv6RV3UKbDyNWLRr
iV7sZvXElGsUefixxGANYDUPuCrlr3O230Y8zCN0R65BMurppljs9Pp8FwIqaD+v
pVs2alb/PeX7g+hPACKPr4Knu8QeZYmzdHoyYeLoMG3PqIgJVU3/8OHHfmnYCdxT
VSss2LB5FKFCOgetEPGy83KQP7QVaK22GDphZJ4xh7aSewRVP92ORfauiI8To4vQ
0VnLNcQ+1pXnYzgGdv8oF02e4EP5b0jvrTpqCw1U0QU2s2PARJarzajCXBkwa308
gXELRpVRpY4+7WEBSX4RGUigurwGGEh/IP/puVtPDr9KU3lFgaTI8wM624Y3Ob/e
/LVI7a5kUSJysq9/H/QrHjoiuTtV7nCmzBgDqEFSN5hQinSHYKyD0XsUPcLlMJmn
p6CyQDGHv2ibbg+8TStig0xfmC83N8KfDfcCekSrYxquDMTRtfa2VXofzQiQKDnr
XNyIURmZAAUVPR6enxlg5Iqzc0mQGumYif7wzsO1bzVzmVZgIDCVxU95hkoRrutU
qnWXuUGUdieUvXA9HltntTzy2BgJVtg7L/p8YEbd97dxtgK80sbdnjfDswFvEeE4
nTvE+IDKdCmb
=QiQp
-----END PGP SIGNATURE-----
Merge tag 'net-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and wifi.
Current release - regressions:
- neighbour: fix __randomize_layout crash in struct neighbour
- r8169: fix deadlock on RTL8125 in jumbo mtu mode
Previous releases - regressions:
- wifi:
- mac80211: fix warning at station removal time
- cfg80211: fix CQM for non-range use
- tools: ynl-gen: fix unexpected response handling
- octeontx2-af: fix possible buffer overflow
- dpaa2: recycle the RX buffer only after all processing done
- rswitch: fix missing dev_kfree_skb_any() in error path
Previous releases - always broken:
- ipv4: fix uaf issue when receiving igmp query packet
- wifi: mac80211: fix debugfs deadlock at device removal time
- bpf:
- sockmap: af_unix stream sockets need to hold ref for pair sock
- netdevsim: don't accept device bound programs
- selftests: fix a char signedness issue
- dsa: mv88e6xxx: fix marvell 6350 probe crash
- octeontx2-pf: restore TC ingress police rules when interface is up
- wangxun: fix memory leak on msix entry
- ravb: keep reverse order of operations in ravb_remove()"
* tag 'net-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
net: ravb: Keep reverse order of operations in ravb_remove()
net: ravb: Stop DMA in case of failures on ravb_open()
net: ravb: Start TX queues after HW initialization succeeded
net: ravb: Make write access to CXR35 first before accessing other EMAC registers
net: ravb: Use pm_runtime_resume_and_get()
net: ravb: Check return value of reset_control_deassert()
net: libwx: fix memory leak on msix entry
ice: Fix VF Reset paths when interface in a failed over aggregate
bpf, sockmap: Add af_unix test with both sockets in map
bpf, sockmap: af_unix stream sockets need to hold ref for pair sock
tools: ynl-gen: always construct struct ynl_req_state
ethtool: don't propagate EOPNOTSUPP from dumps
ravb: Fix races between ravb_tx_timeout_work() and net related ops
r8169: prevent potential deadlock in rtl8169_close
r8169: fix deadlock on RTL8125 in jumbo mtu mode
neighbour: Fix __randomize_layout crash in struct neighbour
octeontx2-pf: Restore TC ingress police rules when interface is up
octeontx2-pf: Fix adding mbox work queue entry when num_vfs > 64
net: stmmac: xgmac: Disable FPE MMC interrupts
octeontx2-af: Fix possible buffer overflow
...
|
||
|
Peter Zijlstra
|
382c27f4ed |
perf: Fix perf_event_validate_size()
Budimir noted that perf_event_validate_size() only checks the size of
the newly added event, even though the sizes of all existing events
can also change due to not all events having the same read_format.
When we attach the new event, perf_group_attach(), we do re-compute
the size for all events.
Fixes:
|
||
|
Elliot Berman
|
23ab79e8e4 |
freezer,sched: Do not restore saved_state of a thawed task
It is possible for a task to be thawed multiple times when mixing the
*legacy* cgroup freezer and system-wide freezer. To do this, freeze the
cgroup, do system-wide freeze/thaw, then thaw the cgroup. When this
happens, then a stale saved_state can be written to the task's state
and cause task to hang indefinitely. Fix this by only trying to thaw
tasks that are actually frozen.
This change also has the marginal benefit avoiding unnecessary
wake_up_state(p, TASK_FROZEN) if we know the task is already thawed.
There is not possibility of time-of-compare/time-of-use race when we skip
the wake_up_state because entering/exiting TASK_FROZEN is guarded by
freezer_lock.
Fixes:
|
||
|
Tim Van Patten
|
cff5f49d43 |
cgroup_freezer: cgroup_freezing: Check if not frozen
__thaw_task() was recently updated to warn if the task being thawed was
part of a freezer cgroup that is still currently freezing:
void __thaw_task(struct task_struct *p)
{
...
if (WARN_ON_ONCE(freezing(p)))
goto unlock;
This has exposed a bug in cgroup1 freezing where when CGROUP_FROZEN is
asserted, the CGROUP_FREEZING bits are not also cleared at the same
time. Meaning, when a cgroup is marked FROZEN it continues to be marked
FREEZING as well. This causes the WARNING to trigger, because
cgroup_freezing() thinks the cgroup is still freezing.
There are two ways to fix this:
1. Whenever FROZEN is set, clear FREEZING for the cgroup and all
children cgroups.
2. Update cgroup_freezing() to also verify that FROZEN is not set.
This patch implements option (2), since it's smaller and more
straightforward.
Signed-off-by: Tim Van Patten <timvp@google.com>
Tested-by: Mark Hasemeyer <markhas@chromium.org>
Fixes:
|
||
|
Hou Tao
|
75a442581d |
bpf: Add missed allocation hint for bpf_mem_cache_alloc_flags()
bpf_mem_cache_alloc_flags() may call __alloc() directly when there is no
free object in free list, but it doesn't initialize the allocation hint
for the returned pointer. It may lead to bad memory dereference when
freeing the pointer, so fix it by initializing the allocation hint.
Fixes:
|
||
|
Linus Torvalds
|
1d0dbc3d16 |
Fix lockdep block chain corruption resulting in KASAN warnings.
Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmVjEa0RHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1jGMRAAvlW/mmlwp4lRv/+aIRBo3iAzDS9vkPds uuS7jOweKkFJZJTR0Fr/OppRB05JObSUVXQSH71hGc0YUC29NEQyqa03Qy6MDdDx TuvDzIUildQqcUVJLRV2d8PmNRfFQftuQnvQcFpk+T0jrElBq6ADTe0SAwbSYLVU 8onXjYrGRsxOaZP7zQ99o4BkWyX7DHMv8lMhq5QdEHotg8/4BkcYDU4F99Zs0tu9 txi2RPDCvR8JmvK37qMXumexu/IMBcE8OQadmlQjK1uPiXIBj+7iHdrqDegUIayk XyttXmvODb8SgXL/o5thbmHI9ZGsTSK0RpwQMO5CHrF0LmlI/z2bNClz9bGMh/7A Sa6misq4at0o50RQmpus3zo8q8hZ1P37bhyhIBgsfbzLJCVWU5LAltV3A6OrDygy YR4j29qSsnZvRZ1kvlfDROS5t4QicPN1IwfYxdDJypnlapIeQbmt1nLQFH1zaCN4 EwYeVTfJ9dJpXozZTPftD/uiPhj7NZUNUhkVI9mngP46XMCC1GWjF1CcPYLuv8Iz Qw0Gj4YzDWFwuG98r3hrntXaTz2BKy4GVAQTQcpswhdPFJ/BPxY4AJPeTznm7fQX Lu2bIBLYlUROvuL45TgAPArh17iC8O1pfxwTfEOxlQvi9+xNzN9hPNsWRSiJnYlV R4q3G7Ejelo= =8C4B -----END PGP SIGNATURE----- Merge tag 'locking-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Ingo Molnar: "Fix lockdep block chain corruption resulting in KASAN warnings" * tag 'locking-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep: Fix block chain corruption |
||
|
Peter Zijlstra
|
bca4104b00 |
lockdep: Fix block chain corruption
Kent reported an occasional KASAN splat in lockdep. Mark then noted:
> I suspect the dodgy access is to chain_block_buckets[-1], which hits the last 4
> bytes of the redzone and gets (incorrectly/misleadingly) attributed to
> nr_large_chain_blocks.
That would mean @size == 0, at which point size_to_bucket() returns -1
and the above happens.
alloc_chain_hlocks() has 'size - req', for the first with the
precondition 'size >= rq', which allows the 0.
This code is trying to split a block, del_chain_block() takes what we
need, and add_chain_block() puts back the remainder, except in the
above case the remainder is 0 sized and things go sideways.
Fixes:
|
||
|
Linus Torvalds
|
d3fa86b1a7 |
Including fixes from bpf.
Current release - regressions:
- Revert "net: r8169: Disable multicast filter for RTL8168H
and RTL8107E"
- kselftest: rtnetlink: fix ip route command typo
Current release - new code bugs:
- s390/ism: make sure ism driver implies smc protocol in kconfig
- two build fixes for tools/net
Previous releases - regressions:
- rxrpc: couple of ACK/PING/RTT handling fixes
Previous releases - always broken:
- bpf: verify bpf_loop() callbacks as if they are called unknown
number of times
- improve stability of auto-bonding with Hyper-V
- account BPF-neigh-redirected traffic in interface statistics
Misc:
- net: fill in some more MODULE_DESCRIPTION()s
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=2sG4
-----END PGP SIGNATURE-----
Merge tag 'net-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf.
Current release - regressions:
- Revert "net: r8169: Disable multicast filter for RTL8168H and
RTL8107E"
- kselftest: rtnetlink: fix ip route command typo
Current release - new code bugs:
- s390/ism: make sure ism driver implies smc protocol in kconfig
- two build fixes for tools/net
Previous releases - regressions:
- rxrpc: couple of ACK/PING/RTT handling fixes
Previous releases - always broken:
- bpf: verify bpf_loop() callbacks as if they are called unknown
number of times
- improve stability of auto-bonding with Hyper-V
- account BPF-neigh-redirected traffic in interface statistics
Misc:
- net: fill in some more MODULE_DESCRIPTION()s"
* tag 'net-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
tools: ynl: fix duplicate op name in devlink
tools: ynl: fix header path for nfsd
net: ipa: fix one GSI register field width
tls: fix NULL deref on tls_sw_splice_eof() with empty record
net: axienet: Fix check for partial TX checksum
vsock/test: fix SEQPACKET message bounds test
i40e: Fix adding unsupported cloud filters
ice: restore timestamp configuration after device reset
ice: unify logic for programming PFINT_TSYN_MSK
ice: remove ptp_tx ring parameter flag
amd-xgbe: propagate the correct speed and duplex status
amd-xgbe: handle the corner-case during tx completion
amd-xgbe: handle corner-case during sfp hotplug
net: veth: fix ethtool stats reporting
octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF
net: usb: qmi_wwan: claim interface 4 for ZTE MF290
Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E"
net/smc: avoid data corruption caused by decline
nfc: virtual_ncidev: Add variable to check if ndev is running
dpll: Fix potential msg memleak when genlmsg_put_reply failed
...
|