In preparation for supporting BPF load-acquire and store-release
instructions for architectures where bpf_jit_needs_zext() returns true
(e.g. riscv64), make insn_def_regno() handle load-acquires properly.
Acked-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # QEMU/RVA23
Signed-off-by: Peilin Ye <yepeilin@google.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/09cb2aec979aaed9d16db41f0f5b364de39377c0.1746588351.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In the kernel fq qdisc implementation, it only needs to look at
the fields of the first node in a list but does not always
need to remove it from the list. It is more convenient to have
a peek kfunc for the list. It works similar to the bpf_rbtree_first().
This patch adds bpf_list_{front,back} kfunc. The verifier is changed
such that the kfunc returning "struct bpf_list_node *" will be
marked as non-owning. The exception is the KF_ACQUIRE kfunc. The
net effect is only the new bpf_list_{front,back} kfuncs will
have its return pointer marked as non-owning.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-8-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The next patch will add bpf_list_{front,back} kfuncs to peek the head
and tail of a list. Both of them will return a 'struct bpf_list_node *'.
Follow the earlier change for rbtree, this patch checks the
return btf type is a 'struct bpf_list_node' pointer instead
of checking each kfuncs individually to decide if
mark_reg_graph_node should be called. This will make
the bpf_list_{front,back} kfunc addition easier in
the later patch.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-7-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf_rbtree_{remove,left,right} requires the root's lock to be held.
They also check the node_internal->owner is still owned by that root
before proceeding, so it is safe to allow refcounted bpf_rb_node
pointer to be used in these kfuncs.
In a bpf fq implementation which is much closer to the kernel fq,
https://lore.kernel.org/bpf/20250418224652.105998-13-martin.lau@linux.dev/,
a networking flow (allocated by bpf_obj_new) can be added to two different
rbtrees. There are cases that the flow is searched from one rbtree,
held the refcount of the flow, and then removed from another rbtree:
struct fq_flow {
struct bpf_rb_node fq_node;
struct bpf_rb_node rate_node;
struct bpf_refcount refcount;
unsigned long sk_long;
};
int bpf_fq_enqueue(...)
{
/* ... */
bpf_spin_lock(&root->lock);
while (can_loop) {
/* ... */
if (!p)
break;
gc_f = bpf_rb_entry(p, struct fq_flow, fq_node);
if (gc_f->sk_long == sk_long) {
f = bpf_refcount_acquire(gc_f);
break;
}
/* ... */
}
bpf_spin_unlock(&root->lock);
if (f) {
bpf_spin_lock(&q->lock);
bpf_rbtree_remove(&q->delayed, &f->rate_node);
bpf_spin_unlock(&q->lock);
}
}
bpf_rbtree_{left,right} do not need this change but are relaxed together
with bpf_rbtree_remove instead of adding extra verifier logic
to exclude these kfuncs.
To avoid bi-sect failure, this patch also changes the selftests together.
The "rbtree_api_remove_unadded_node" is not expecting verifier's error.
The test now expects bpf_rbtree_remove(&groot, &m->node) to return NULL.
The test uses __retval(0) to ensure this NULL return value.
Some of the "only take non-owning..." failure messages are changed also.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-5-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In a bpf fq implementation that is much closer to the kernel fq,
it will need to traverse the rbtree:
https://lore.kernel.org/bpf/20250418224652.105998-13-martin.lau@linux.dev/
The much simplified logic that uses the bpf_rbtree_{root,left,right}
to traverse the rbtree is like:
struct fq_flow {
struct bpf_rb_node fq_node;
struct bpf_rb_node rate_node;
struct bpf_refcount refcount;
unsigned long sk_long;
};
struct fq_flow_root {
struct bpf_spin_lock lock;
struct bpf_rb_root root __contains(fq_flow, fq_node);
};
struct fq_flow *fq_classify(...)
{
struct bpf_rb_node *tofree[FQ_GC_MAX];
struct fq_flow_root *root;
struct fq_flow *gc_f, *f;
struct bpf_rb_node *p;
int i, fcnt = 0;
/* ... */
f = NULL;
bpf_spin_lock(&root->lock);
p = bpf_rbtree_root(&root->root);
while (can_loop) {
if (!p)
break;
gc_f = bpf_rb_entry(p, struct fq_flow, fq_node);
if (gc_f->sk_long == sk_long) {
f = bpf_refcount_acquire(gc_f);
break;
}
/* To be removed from the rbtree */
if (fcnt < FQ_GC_MAX && fq_gc_candidate(gc_f, jiffies_now))
tofree[fcnt++] = p;
if (gc_f->sk_long > sk_long)
p = bpf_rbtree_left(&root->root, p);
else
p = bpf_rbtree_right(&root->root, p);
}
/* remove from the rbtree */
for (i = 0; i < fcnt; i++) {
p = tofree[i];
tofree[i] = bpf_rbtree_remove(&root->root, p);
}
bpf_spin_unlock(&root->lock);
/* bpf_obj_drop the fq_flow(s) that have just been removed
* from the rbtree.
*/
for (i = 0; i < fcnt; i++) {
p = tofree[i];
if (p) {
gc_f = bpf_rb_entry(p, struct fq_flow, fq_node);
bpf_obj_drop(gc_f);
}
}
return f;
}
The above simplified code needs to traverse the rbtree for two purposes,
1) find the flow with the desired sk_long value
2) while searching for the sk_long, collect flows that are
the fq_gc_candidate. They will be removed from the rbtree.
This patch adds the bpf_rbtree_{root,left,right} kfunc to enable
the rbtree traversal. The returned bpf_rb_node pointer will be a
non-owning reference which is the same as the returned pointer
of the exisiting bpf_rbtree_first kfunc.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The current rbtree kfunc, bpf_rbtree_{first, remove}, returns the
bpf_rb_node pointer. The check_kfunc_call currently checks the
kfunc btf_id instead of its return pointer type to decide
if it needs to do mark_reg_graph_node(reg0) and ref_set_non_owning(reg0).
The later patch will add bpf_rbtree_{root,left,right} that will also
return a bpf_rb_node pointer. Instead of adding more kfunc btf_id
checks to the "if" case, this patch changes the test to check the
kfunc's return type. is_rbtree_node_type() function is added to
test if a pointer type is a bpf_rb_node. The callers have already
skipped the modifiers of the pointer type.
A note on the ref_set_non_owning(), although bpf_rbtree_remove()
also returns a bpf_rb_node pointer, the bpf_rbtree_remove()
has the KF_ACQUIRE flag. Thus, its reg0 will not become non-owning.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-3-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In a later patch, two new kfuncs will take the bpf_rb_node pointer arg.
struct bpf_rb_node *bpf_rbtree_left(struct bpf_rb_root *root,
struct bpf_rb_node *node);
struct bpf_rb_node *bpf_rbtree_right(struct bpf_rb_root *root,
struct bpf_rb_node *node);
In the check_kfunc_call, there is a "case KF_ARG_PTR_TO_RB_NODE"
to check if the reg->type should be an allocated pointer or should be
a non_owning_ref.
The later patch will need to ensure that the bpf_rb_node pointer passing
to the new bpf_rbtree_{left,right} must be a non_owning_ref. This
should be the same requirement as the existing bpf_rbtree_remove.
This patch swaps the current "if else" statement. Instead of checking
the bpf_rbtree_remove, it checks the bpf_rbtree_add. Then the new
bpf_rbtree_{left,right} will fall into the "else" case to make
the later patch simpler. bpf_rbtree_add should be the only
one that needs an allocated pointer.
This should be a no-op change considering there are only two kfunc(s)
taking bpf_rb_node pointer arg, rbtree_add and rbtree_remove.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In the current implementation if the program is dev-bound to a specific
device, it will not be possible to perform XDP_REDIRECT into a DEVMAP
or CPUMAP even if the program is running in the driver NAPI context and
it is not attached to any map entry. This seems in contrast with the
explanation available in bpf_prog_map_compatible routine.
Fix the issue introducing __bpf_prog_map_compatible utility routine in
order to avoid bpf_prog_is_dev_bound() check running bpf_check_tail_call()
at program load time (bpf_prog_select_runtime()).
Continue forbidding to attach a dev-bound program to XDP maps
(BPF_MAP_TYPE_PROG_ARRAY, BPF_MAP_TYPE_DEVMAP and BPF_MAP_TYPE_CPUMAP).
Fixes: 3d76a4d3d4 ("bpf: XDP metadata RX kfuncs")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
[ Arguably if pick_eevdf()/pick_next_entity() was less trusting
of complex math being correct it could have de-escalated a
crash into a warning, but that's for a different patch. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=pJ11
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Fix sporadic crashes in dequeue_entities() due to ... bad math.
[ Arguably if pick_eevdf()/pick_next_entity() was less trusting of
complex math being correct it could have de-escalated a crash into
a warning, but that's for a different patch ]"
* tag 'sched-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/eevdf: Fix se->slice being set to U64_MAX and resulting crash
- Use POLLERR for events in error state, instead of
the ambiguous POLLHUP error value
- Fix non-sampling (counting) events on certain x86 platforms
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=LLOs
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc perf events fixes from Ingo Molnar:
- Use POLLERR for events in error state, instead of the ambiguous
POLLHUP error value
- Fix non-sampling (counting) events on certain x86 platforms
* tag 'perf-urgent-2025-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix non-sampling (counting) events on certain x86 platforms
perf/core: Change to POLLERR for pinned events with error
There is a code path in dequeue_entities() that can set the slice of a
sched_entity to U64_MAX, which sometimes results in a crash.
The offending case is when dequeue_entities() is called to dequeue a
delayed group entity, and then the entity's parent's dequeue is delayed.
In that case:
1. In the if (entity_is_task(se)) else block at the beginning of
dequeue_entities(), slice is set to
cfs_rq_min_slice(group_cfs_rq(se)). If the entity was delayed, then
it has no queued tasks, so cfs_rq_min_slice() returns U64_MAX.
2. The first for_each_sched_entity() loop dequeues the entity.
3. If the entity was its parent's only child, then the next iteration
tries to dequeue the parent.
4. If the parent's dequeue needs to be delayed, then it breaks from the
first for_each_sched_entity() loop _without updating slice_.
5. The second for_each_sched_entity() loop sets the parent's ->slice to
the saved slice, which is still U64_MAX.
This throws off subsequent calculations with potentially catastrophic
results. A manifestation we saw in production was:
6. In update_entity_lag(), se->slice is used to calculate limit, which
ends up as a huge negative number.
7. limit is used in se->vlag = clamp(vlag, -limit, limit). Because limit
is negative, vlag > limit, so se->vlag is set to the same huge
negative number.
8. In place_entity(), se->vlag is scaled, which overflows and results in
another huge (positive or negative) number.
9. The adjusted lag is subtracted from se->vruntime, which increases or
decreases se->vruntime by a huge number.
10. pick_eevdf() calls entity_eligible()/vruntime_eligible(), which
incorrectly returns false because the vruntime is so far from the
other vruntimes on the queue, causing the
(vruntime - cfs_rq->min_vruntime) * load calulation to overflow.
11. Nothing appears to be eligible, so pick_eevdf() returns NULL.
12. pick_next_entity() tries to dereference the return value of
pick_eevdf() and crashes.
Dumping the cfs_rq states from the core dumps with drgn showed tell-tale
huge vruntime ranges and bogus vlag values, and I also traced se->slice
being set to U64_MAX on live systems (which was usually "benign" since
the rest of the runqueue needed to be in a particular state to crash).
Fix it in dequeue_entities() by always setting slice from the first
non-empty cfs_rq.
Fixes: aef6987d89 ("sched/eevdf: Propagate min_slice up the cgroup hierarchy")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/f0c2d1072be229e1bdddc73c0703919a8b00c652.1745570998.git.osandov@fb.com
- avoid unused variable warnings (Arnd Bergmann, Marek Szyprowski)
- add runtume warnings and debug messages for devices with limited DMA
capabilities (Balbir Singh, Chen-Yu Tsai)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaAtFeAAKCRCJp1EFxbsS
RGJwAQDIwyLQdk4XbWUZYokxIl/5jIiuaTqQBoPGPILnwoTkuAD8DlxKQvsnzkdT
QK7TSFpKwrboSaveGWEG5oB60wIsKgU=
=TSJY
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.15-2025-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-maping fixes from Marek Szyprowski:
- avoid unused variable warnings (Arnd Bergmann, Marek Szyprowski)
- add runtume warnings and debug messages for devices with limited DMA
capabilities (Balbir Singh, Chen-Yu Tsai)
* tag 'dma-mapping-6.15-2025-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-coherent: Warn if OF reserved memory is beyond current coherent DMA mask
dma-mapping: Fix warning reported for missing prototype
dma-mapping: avoid potential unused data compilation warning
dma/mapping.c: dev_dbg support for dma_addressing_limited
dma/contiguous: avoid warning about unused size_bytes
Add namespace to BPF internal symbols used by light skeleton
to prevent abuse and document with the code their allowed usage.
Fixes: b1d18a7574 ("bpf: Extend sys_bpf commands for bpf_syscall programs.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20250425014542.62385-1-alexei.starovoitov@gmail.com
The _safe variant used here gets the next element before running the callback,
avoiding the endless loop condition.
Signed-off-by: Brandon Kammerdiener <brandon.kammerdiener@intel.com>
Link: https://lore.kernel.org/r/20250424153246.141677-2-brandon.kammerdiener@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Adding support to access arguments with const void pointer arguments
in tracing programs.
Currently we allow tracing programs to access void pointers. If we try to
access argument which is pointer to const void like 2nd argument in kfree,
verifier will fail to load the program with;
0: R1=ctx() R10=fp0
; asm volatile ("r2 = *(u64 *)(r1 + 8); ");
0: (79) r2 = *(u64 *)(r1 +8)
func 'kfree' arg1 type UNKNOWN is not a struct
Changing the is_int_ptr to void and generic integer check and renaming
it to is_void_or_int_ptr.
Signed-off-by: KaFai Wan <mannkafai@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20250423121329.3163461-2-mannkafai@gmail.com
Many conditional checks in switch-case are redundant
with bpf_base_func_proto and should be removed.
Regarding the permission checks bpf_base_func_proto:
The permission checks in bpf_prog_load (as outlined below)
ensure that the trace has both CAP_BPF and CAP_PERFMON capabilities,
thus enabling the use of corresponding prototypes
in bpf_base_func_proto without adverse effects.
bpf_prog_load
......
bpf_cap = bpf_token_capable(token, CAP_BPF);
......
if (type != BPF_PROG_TYPE_SOCKET_FILTER &&
type != BPF_PROG_TYPE_CGROUP_SKB &&
!bpf_cap)
goto put_token;
......
if (is_perfmon_prog_type(type) && !bpf_token_capable(token, CAP_PERFMON))
goto put_token;
......
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20250423073151.297103-1-yangfeng59949@163.com
The calculation of the index used to access the mask field in 'struct
bpf_raw_tp_null_args' is done with 'int' type, which could overflow when
the tracepoint being attached has more than 8 arguments.
While none of the tracepoints mentioned in raw_tp_null_args[] currently
have more than 8 arguments, there do exist tracepoints that had more
than 8 arguments (e.g. iocost_iocg_forgive_debt), so use the correct
type for calculation and avoid Smatch static checker warning.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20250418074946.35569-1-shung-hsi.yu@suse.com
Closes: https://lore.kernel.org/r/843a3b94-d53d-42db-93d4-be10a4090146@stanley.mountain/
A small number of fixes.
virtgpu is exempt from reset shutdown fow now -
a more complete fix is in the works
spec compliance fixes in:
virtio-pci cap commands
vhost_scsi_send_bad_target
virtio console resize
missing locking fix in vhost-scsi
virtio ring - a KCSAN false positive fix
VHOST_*_OWNER documentation fix
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmgIi3cPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpGU8H/1Fq8pH+irGvyH4E21O03qx0wiM+lcYVhNH5
2a3rjOwuJBiLvscZTJG/w07hIpx0O4WrbygdT0BTll4Uen2C+OpGn/Y1LfhW6wsr
3yyeBpTr5hKiY8sOD08rMTHTCM4mD8UdYr13RcNq+eUxNZ6bA+kiGaXpIk0AiRPR
5pdbx16cTZM7k+/9aXp68hRO7yHnyilGzAJG1hHmfx1L5Mt++RVKsf2KI+3YHWcI
0ZZj/NP3iZfNm57+QpKX6zYikH4IFIer1r9wotMaR74brpuq8w7HKZUqe3VfG11Y
TBgq6NfDZVq8G8bCGPv+C+DfDnpYMFVYqytCLn4/AyOhLNCRDs8=
=m8wk
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"A small number of fixes:
- virtgpu is exempt from reset shutdown fow now - a more complete fix
is in the works
- spec compliance fixes in:
- virtio-pci cap commands
- vhost_scsi_send_bad_target
- virtio console resize
- missing locking fix in vhost-scsi
- virtio ring - a KCSAN false positive fix
- VHOST_*_OWNER documentation fix"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-scsi: Fix vhost_scsi_send_status()
vhost-scsi: Fix vhost_scsi_send_bad_target()
vhost-scsi: protect vq->log_used with vq->mutex
vhost_task: fix vhost_task_create() documentation
virtio_console: fix order of fields cols and rows
virtio_console: fix missing byte order handling for cols and rows
virtgpu: don't reset on shutdown
virtio_ring: Fix data race by tagging event_triggered as racy for KCSAN
vhost: fix VHOST_*_OWNER documentation
virtio_pci: Use self group type for cap commands
Commit:
f4b07fd62d ("perf/core: Use POLLHUP for pinned events in error")
started to emit POLLHUP for pinned events in an error state.
But the POLLHUP is also used to signal events that the attached task is
terminated. To distinguish pinned per-task events in the error state
it would need to check if the task is live.
Change it to POLLERR to make it clear.
Suggested-by: Gabriel Marin <gmx@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250422223318.180343-1-namhyung@kernel.org
When a reserved memory region described in the device tree is attached
to a device, it is expected that the device's limitations are correctly
included in that description.
However, if the device driver failed to implement DMA address masking
or addressing beyond the default 32 bits (on arm64), then bad things
could happen because the DMA address was truncated, such as playing
back audio with no actual audio coming out, or DMA overwriting random
blocks of kernel memory.
Check against the coherent DMA mask when the memory regions are attached
to the device. Give a warning when the memory region can not be covered
by the mask.
A warning instead of a hard error was chosen, because it is possible
that existing drivers could be working fine even if they forgot to
extend the coherent DMA mask.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250421083930.374173-1-wenst@chromium.org
lkp reported a warning about missing prototype for a recent patch.
The kernel-doc style comments are out of sync, move them to the right
function.
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Christoph Hellwig <hch@lst.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504190615.g9fANxHw-lkp@intel.com/
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
[mszyprow: reformatted subject]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250422114034.3535515-1-balbirs@nvidia.com
- Use kvzalloc() so that large exit_dump buffer allocations don't fail
easily.
- Remove cpu.weight / cpu.idle unimplemented warnings which are more
annoying than helpful. This makes SCX_OPS_HAS_CGROUP_WEIGHT unnecessary.
Mark it for deprecation.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaAaeKw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGcDjAQDM14FReObIKOOuqzlNaYXQqcSW2///ZVf/FR8j
HpWtyAD/Tsqg6CzBpTxKkpMRLsE2iKI1t770vkUnDbjcnR0Rxgc=
=rIV5
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-6.15-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Use kvzalloc() so that large exit_dump buffer allocations don't fail
easily
- Remove cpu.weight / cpu.idle unimplemented warnings which are more
annoying than helpful.
This makes SCX_OPS_HAS_CGROUP_WEIGHT unnecessary. Mark it for
deprecation
* tag 'sched_ext-for-6.15-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Mark SCX_OPS_HAS_CGROUP_WEIGHT for deprecation
sched_ext: Remove cpu.weight / cpu.idle unimplemented warnings
sched_ext: Use kvzalloc for large exit_dump allocation
- Fix compilation in CONFIG_LOCKDEP && !CONFIG_PROVE_RCU configurations.
- Allow "cpuset_v2_mode" mount option for "cpuset" filesystem type to make
life easier for android.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaAac+Q4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGUiAAQCbw6eOFAE+sjI6GgAeMVORbLqyufGDNPvBwgzJ
xPxgcwD/ZLlsJWRG6BzQ/KHeFZnGWSJEiqSSFHGCCr0l4QkIdgA=
=ay1E
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.15-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix compilation in CONFIG_LOCKDEP && !CONFIG_PROVE_RCU configurations
- Allow "cpuset_v2_mode" mount option for "cpuset" filesystem type to
make life easier for android
* tag 'cgroup-for-6.15-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset-v1: Add missing support for cpuset_v2_mode
cgroup: Fix compilation issue due to cgroup_mutex not being exported
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaAQM5QAKCRCRxhvAZXjc
olcwAP0RETZn15Jkt5+mKjcx99fuVE7je3lp56UH4Y4XjZmthgEA1n65RDr4Tq6E
548A2/9Hnt4NWdvoi9VhrG4+5dNRowM=
=cFFa
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc3.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Revert the hfs{plus} deprecation warning that's also included in this
pull request. The commit introducing the deprecation warning resides
rather early in this branch. So simply dropping it would've rebased
all other commits which I decided to avoid. Hence the revert in the
same branch
[ Background - the deprecation warning discussion resulted in people
stepping up, and so hfs{plus} will have a maintainer taking care of
it after all.. - Linus ]
- Switch CONFIG_SYSFS_SYCALL default to n and decouple from
CONFIG_EXPERT
- Fix an audit bug caused by changes to our kernel path lookup helpers
this cycle. Audit needs the parent path even if the dentry it tried
to look up is negative
- Ensure that the kernel path lookup helpers leave the passed in path
argument clean when they return an error. This is consistent with all
our other helpers
- Ensure that vfs_getattr_nosec() calls bdev_statx() so the relevant
information is available to kernel consumers as well
- Don't set a timer and call schedule() if the timer will expire
immediately in epoll
- Make netfs lookup tables with __nonstring
* tag 'vfs-6.15-rc3.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
Revert "hfs{plus}: add deprecation warning"
fs: move the bdex_statx call to vfs_getattr_nosec
netfs: Mark __nonstring lookup tables
eventpoll: Set epoll timeout if it's in the future
fs: ensure that *path_locked*() helpers leave passed path pristine
fs: add kern_path_locked_negative()
hfs{plus}: add deprecation warning
Kconfig: switch CONFIG_SYSFS_SYCALL default to n
- Initialize hash variables in ftrace subops logic
The fix that simplified the ftrace subops logic opened a path where some
variables could be used without being initialized, and done subtly where
the compiler did not catch it. Initialize those variables to the
EMPTY_HASH, which is the default hash.
- Reinitialize the hash pointers after they are freed
Some of the hash pointers in the subop logic were freed but may still be
referenced later. To prevent use-after-free bugs, initialize them back to
the EMPTY_HASH.
- Free the ftrace hashes when they are replaced
The fix that simplified the subops logic updated some hash pointers, but
left the original hash that they were pointing to where they are no longer
used. This caused a memory leak. Free the hashes that are pointed to by
the pointers when they are replaced.
- Fix size initialization of ftrace direct function hash
The ftrace direct function hash used by BPF initialized the hash size
incorrectly. It checked the size of items to a hard coded 32, which made
the hash bit size of 5. The hash size is supposed to be limited by the bit
size of the hash, as the bitmask is allowed to be greater than 5. Rework
the size check to first pass the number of elements to fls() and then
compare that to FTRACE_HASH_MAX_BITS before allocating the hash.
- Fix format output of ftrace_graph_ent_entry event
The field depth of the ftrace_graph_ent_entry event is of size 4 but the
output showed it as unsigned long and use "%lu". Change it to unsigned int
and use "%u" in the print format that is displayed to user space.
- Fix the trace event filter on strings
Events can be filtered on numbers or string values. The return value
checked from strncpy_from_kernel_nofault() and strncpy_from_user_nofault()
was used to determine if reading the strings would fault or not. It would
return fault if the value was non zero, which is basically meant that it
was always considering the read as a fault.
- Add selftest to test trace event string filtering
In order to catch the breakage of the string filtering, add a self test to
make sure that it continues to work.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaAPqNRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qv5nAP4mqIgne7tzMhHIH/nQGM/7Dj98n+Vt
BXm6VifVdVJvtAD+KCDipZ2MspGEeZX3SDSnvBuj0S+OX9T9CTWPv+rFUwE=
=AWY4
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Initialize hash variables in ftrace subops logic
The fix that simplified the ftrace subops logic opened a path where
some variables could be used without being initialized, and done
subtly where the compiler did not catch it. Initialize those
variables to the EMPTY_HASH, which is the default hash.
- Reinitialize the hash pointers after they are freed
Some of the hash pointers in the subop logic were freed but may still
be referenced later. To prevent use-after-free bugs, initialize them
back to the EMPTY_HASH.
- Free the ftrace hashes when they are replaced
The fix that simplified the subops logic updated some hash pointers,
but left the original hash that they were pointing to where they are
no longer used. This caused a memory leak. Free the hashes that are
pointed to by the pointers when they are replaced.
- Fix size initialization of ftrace direct function hash
The ftrace direct function hash used by BPF initialized the hash size
incorrectly. It checked the size of items to a hard coded 32, which
made the hash bit size of 5. The hash size is supposed to be limited
by the bit size of the hash, as the bitmask is allowed to be greater
than 5. Rework the size check to first pass the number of elements to
fls() and then compare that to FTRACE_HASH_MAX_BITS before allocating
the hash.
- Fix format output of ftrace_graph_ent_entry event
The field depth of the ftrace_graph_ent_entry event is of size 4 but
the output showed it as unsigned long and use "%lu". Change it to
unsigned int and use "%u" in the print format that is displayed to
user space.
- Fix the trace event filter on strings
Events can be filtered on numbers or string values. The return value
checked from strncpy_from_kernel_nofault() and
strncpy_from_user_nofault() was used to determine if reading the
strings would fault or not. It would return fault if the value was
non zero, which is basically meant that it was always considering the
read as a fault.
- Add selftest to test trace event string filtering
In order to catch the breakage of the string filtering, add a self
test to make sure that it continues to work.
* tag 'trace-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: selftests: Add testing a user string to filters
tracing: Fix filter string testing
ftrace: Fix type of ftrace_graph_ent_entry.depth
ftrace: fix incorrect hash size in register_ftrace_direct()
ftrace: Free ftrace hashes after they are replaced in the subops code
ftrace: Reinitialize hash to EMPTY_HASH after freeing
ftrace: Initialize variables for ftrace_startup/shutdown_subops()
Commit cb380909ae ("vhost: return task creation error instead of NULL")
changed the return value of vhost_task_create(), but did not update the
documentation.
Reflect the change in the documentation: on an error, vhost_task_create()
returns an ERR_PTR() and no longer NULL.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20250327124435.142831-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The filter string testing uses strncpy_from_kernel/user_nofault() to
retrieve the string to test the filter against. The if() statement was
incorrect as it considered 0 as a fault, when it is only negative that it
faulted.
Running the following commands:
# cd /sys/kernel/tracing
# echo "filename.ustring ~ \"/proc*\"" > events/syscalls/sys_enter_openat/filter
# echo 1 > events/syscalls/sys_enter_openat/enable
# ls /proc/$$/maps
# cat trace
Would produce nothing, but with the fix it will produce something like:
ls-1192 [007] ..... 8169.828333: sys_openat(dfd: ffffffffffffff9c, filename: 7efc18359904, flags: 80000, mode: 0)
Link: https://lore.kernel.org/all/CAEf4BzbVPQ=BjWztmEwBPRKHUwNfKBkS3kce-Rzka6zvbQeVpg@mail.gmail.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250417183003.505835fb@gandalf.local.home
Fixes: 77360f9bbc ("tracing: Add test for user space strings when filtering on string pointers")
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Reported-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
ftrace_graph_ent.depth is int, but ftrace_graph_ent_entry.depth is
unsigned long. This confuses trace-cmd on 64-bit big-endian systems and
makes it print a huge amount of spaces. Fix this by using unsigned int,
which has a matching size, instead.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250412221847.17310-2-iii@linux.ibm.com
Fixes: ff5c9c576e ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The maximum of the ftrace hash bits is made fls(32) in
register_ftrace_direct(), which seems illogical. So, we fix it by making
the max hash bits FTRACE_HASH_MAX_BITS instead.
Link: https://lore.kernel.org/20250413014444.36724-1-dongml2@chinatelecom.cn
Fixes: d05cb47066 ("ftrace: Fix modification of direct_function hash while in use")
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The subops processing creates new hashes when adding and removing subops.
There were some places that the old hashes that were replaced were not
freed and this caused some memory leaks.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250417135939.245b128d@gandalf.local.home
Fixes: 0ae6b8ce20 ("ftrace: Fix accounting of subop hashes")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There's several locations that free a ftrace hash pointer but may be
referenced again. Reset them to EMPTY_HASH so that a u-a-f bug doesn't
happen.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250417110933.20ab718b@gandalf.local.home
Fixes: 0ae6b8ce20 ("ftrace: Fix accounting of subop hashes")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The reworking to fix and simplify the ftrace_startup_subops() and the
ftrace_shutdown_subops() made it possible for the filter_hash and
notrace_hash variables to be used uninitialized in a way that the compiler
did not catch it.
Initialize both filter_hash and notrace_hash to the EMPTY_HASH as that is
what they should be if they never are used.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250417104017.3aea66c2@gandalf.local.home
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Fixes: 0ae6b8ce20 ("ftrace: Fix accounting of subop hashes")
Closes: https://lore.kernel.org/all/1db64a42-626d-4b3a-be08-c65e47333ce2@linux.ibm.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Android has mounted the v1 cpuset controller using filesystem type
"cpuset" (not "cgroup") since 2015 [1], and depends on the resulting
behavior where the controller name is not added as a prefix for cgroupfs
files. [2]
Later, a problem was discovered where cpu hotplug onlining did not
affect the cpuset/cpus files, which Android carried an out-of-tree patch
to address for a while. An attempt was made to upstream this patch, but
the recommendation was to use the "cpuset_v2_mode" mount option
instead. [3]
An effort was made to do so, but this fails with "cgroup: Unknown
parameter 'cpuset_v2_mode'" because commit e1cba4b85d ("cgroup: Add
mount flag to enable cpuset to use v2 behavior in v1 cgroup") did not
update the special cased cpuset_mount(), and only the cgroup (v1)
filesystem type was updated.
Add parameter parsing to the cpuset filesystem type so that
cpuset_v2_mode works like the cgroup filesystem type:
$ mkdir /dev/cpuset
$ mount -t cpuset -ocpuset_v2_mode none /dev/cpuset
$ mount|grep cpuset
none on /dev/cpuset type cgroup (rw,relatime,cpuset,noprefix,cpuset_v2_mode,release_agent=/sbin/cpuset_release_agent)
[1] b769c8d24f
[2] https://cs.android.com/android/platform/superproject/main/+/main:system/core/libprocessgroup/setup/cgroup_map_write.cpp;drc=2dac5d89a0f024a2d0cc46a80ba4ee13472f1681;l=192
[3] https://lore.kernel.org/lkml/f795f8be-a184-408a-0b5a-553d26061385@redhat.com/T/
Fixes: e1cba4b85d ("cgroup: Add mount flag to enable cpuset to use v2 behavior in v1 cgroup")
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Waiman Long <longman@redhat.com>
Reviewed-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When adding folio_memcg function call in the zram module for
Android16-6.12, the following error occurs during compilation:
ERROR: modpost: "cgroup_mutex" [../soc-repo/zram.ko] undefined!
This error is caused by the indirect call to lockdep_is_held(&cgroup_mutex)
within folio_memcg. The export setting for cgroup_mutex is controlled by
the CONFIG_PROVE_RCU macro. If CONFIG_LOCKDEP is enabled while
CONFIG_PROVE_RCU is not, this compilation error will occur.
To resolve this issue, add a parallel macro CONFIG_LOCKDEP control to
ensure cgroup_mutex is properly exported when needed.
Signed-off-by: gao xu <gaoxu2@honor.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Notice that ignore_dl_rate_limit() need not piggy back on the
limits_changed handling to achieve its goal (which is to enforce a
frequency update before its due time).
Namely, if sugov_should_update_freq() is updated to check
sg_policy->need_freq_update and return 'true' if it is set when
sg_policy->limits_changed is not set, ignore_dl_rate_limit() may
set the former directly instead of setting the latter, so it can
avoid hitting the memory barrier in sugov_should_update_freq().
Update the code accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/10666429.nUPlyArG6x@rjwysocki.net
The handling of the limits_changed flag in struct sugov_policy needs to
be explicitly synchronized to ensure that cpufreq policy limits updates
will not be missed in some cases.
Without that synchronization it is theoretically possible that
the limits_changed update in sugov_should_update_freq() will be
reordered with respect to the reads of the policy limits in
cpufreq_driver_resolve_freq() and in that case, if the limits_changed
update in sugov_limits() clobbers the one in sugov_should_update_freq(),
the new policy limits may not take effect for a long time.
Likewise, the limits_changed update in sugov_limits() may theoretically
get reordered with respect to the updates of the policy limits in
cpufreq_set_policy() and if sugov_should_update_freq() runs between
them, the policy limits change may be missed.
To ensure that the above situations will not take place, add memory
barriers preventing the reordering in question from taking place and
add READ_ONCE() and WRITE_ONCE() annotations around all of the
limits_changed flag updates to prevent the compiler from messing up
with that code.
Fixes: 600f5badb7 ("cpufreq: schedutil: Don't skip freq update when limits change")
Cc: 5.3+ <stable@vger.kernel.org> # 5.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/3376719.44csPzL39Z@rjwysocki.net
Commit 8e461a1cb4 ("cpufreq: schedutil: Fix superfluous updates caused
by need_freq_update") modified sugov_should_update_freq() to set the
need_freq_update flag only for drivers with CPUFREQ_NEED_UPDATE_LIMITS
set, but that flag generally needs to be set when the policy limits
change because the driver callback may need to be invoked for the new
limits to take effect.
However, if the return value of cpufreq_driver_resolve_freq() after
applying the new limits is still equal to the previously selected
frequency, the driver callback needs to be invoked only in the case
when CPUFREQ_NEED_UPDATE_LIMITS is set (which means that the driver
specifically wants its callback to be invoked every time the policy
limits change).
Update the code accordingly to avoid missing policy limits changes for
drivers without CPUFREQ_NEED_UPDATE_LIMITS.
Fixes: 8e461a1cb4 ("cpufreq: schedutil: Fix superfluous updates caused by need_freq_update")
Closes: https://lore.kernel.org/lkml/Z_Tlc6Qs-tYpxWYb@linaro.org/
Reported-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/3010358.e9J7NaK4W3@rjwysocki.net
The audit code relies on the fact that kern_path_locked() returned a
path even for a negative dentry. If it doesn't find a valid dentry it
immediately calls:
audit_find_parent(d_backing_inode(parent_path.dentry));
which assumes that parent_path.dentry is still valid. But it isn't since
kern_path_locked() has been changed to path_put() also for a negative
dentry.
Fix this by adding a helper that implements the required audit semantics
and allows us to fix the immediate bleeding. We can find a unified
solution for this afterwards.
Link: https://lore.kernel.org/20250414-rennt-wimmeln-f186c3a780f1@brauner
Fixes: 1c3cb50b58 ("VFS: change kern_path_locked() and user_path_locked_at() to never return negative dentry")
Reported-and-tested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In the debug and resolution of an issue involving forced use of bounce
buffers, 7170130e4c ("x86/mm/init: Handle the special case of device
private pages in add_pages(), to not increase max_pfn and trigger
dma_addressing_limited() bounce buffers"). It would have been easier
to debug the issue if dma_addressing_limited() had debug information
about the device not being able to address all of memory and thus forcing
all accesses through a bounce buffer. Please see[2]
Implement dev_dbg to debug the potential use of bounce buffers
when we hit the condition. When swiotlb is used,
dma_addressing_limited() is used to determine the size of maximum dma
buffer size in dma_direct_max_mapping_size(). The debug prints could be
triggered in that check as well (when enabled).
Link: https://lore.kernel.org/lkml/20250401000752.249348-1-balbirs@nvidia.com/ [1]
Link: https://lore.kernel.org/lkml/20250310112206.4168-1-spasswolf@web.de/ [2]
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Bert Karwatzki <spasswolf@web.de>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Balbir Singh <balbirs@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250414113752.3298276-1-balbirs@nvidia.com
- Hide get_vm_area() from MMUless builds
The function get_vm_area() is not defined when CONFIG_MMU is not defined.
Hide that function within #ifdef CONFIG_MMU.
- Fix output of synthetic events when they have dynamic strings
The print fmt of the synthetic event's format file use to have "%.*s" for
dynamic size strings even though the user space exported arguments had
only __get_str() macro that provided just a nul terminated string. This
was fixed so that user space could parse this properly. But the reason
that it had "%.*s" was because internally it provided the maximum size of
the string as one of the arguments. The fix that replaced "%.*s" with "%s"
caused the trace output (when the kernel reads the event) to write
"(efault)" as it would now read the length of the string as "%s".
As the string provided is always nul terminated, there's no reason for the
internal code to use "%.*s" anyway. Just remove the length argument to
match the "%s" that is now in the format.
- Fix the ftrace subops hash logic of the manager ops hash
The function_graph uses the ftrace subops code. The subops code is a way
to have a single ftrace_ops registered with ftrace to determine what
functions will call the ftrace_ops callback. More than one user of
function graph can register a ftrace_ops with it. The function graph
infrastructure will then add this ftrace_ops as a subops with the main
ftrace_ops it registers with ftrace. This is because the functions will
always call the function graph callback which in turn calls the subops
ftrace_ops callbacks.
The main ftrace_ops must add a callback to all the functions that the
subops want a callback from. When a subops is registered, it will update
the main ftrace_ops hash to include the functions it wants. This is the
logic that was broken.
The ftrace_ops hash has a "filter_hash" and a "notrace_hash" were all the
functions in the filter_hash but not in the notrace_hash are attached by
ftrace. The original logic would have the main ftrace_ops filter_hash be a
union of all the subops filter_hashes and the main notrace_hash would be a
intersect of all the subops filter hashes. But this was incorrect because
the notrace hash depends on the filter_hash it is associated to and not
the union of all filter_hashes.
Instead, when a subops is added, just include all the functions of the
subops hash that are in its filter_hash but not in its notrace_hash. The
main subops hash should not use its notrace hash, unless all of its subops
hashes have an empty filter_hash (which means to attach to all functions),
and then, and only then, the main ftrace_ops notrace hash can be the
intersect of all the subops hashes.
This not only fixes the bug, but also simplifies the code.
- Add a selftest to better test the subops filtering
Add a selftest that would catch the bug fixed by the above change.
- Fix extra newline printed in function tracing with retval
The function parameter code changed the output logic slightly and called
print_graph_retval() and also printed a newline. The print_graph_retval()
also prints a newline which caused blank lines to be printed in the
function graph tracer when retval was added. This caused one of the
selftests to fail if retvals were enabled. Instead remove the new line
output from print_graph_retval() and have the callers always print the
new line so that it doesn't have to do special logic if it calls
print_graph_retval() or not.
- Fix out-of-bound memory access in the runtime verifier
When rv_is_container_monitor() is called on the last entry on the link
list it references the next entry, which is the list head and causes an
out-of-bound memory access.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ/rXQxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoj7AQC0C2awpJSUIRj91qjPtMYuNUE3AVpB
EEZEkt19LfE//gEA1fOx3Cors/LrY9dthn/3LMKL23vo9c4i0ffhs2X+1gE=
=XJL5
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Hide get_vm_area() from MMUless builds
The function get_vm_area() is not defined when CONFIG_MMU is not
defined. Hide that function within #ifdef CONFIG_MMU.
- Fix output of synthetic events when they have dynamic strings
The print fmt of the synthetic event's format file use to have "%.*s"
for dynamic size strings even though the user space exported
arguments had only __get_str() macro that provided just a nul
terminated string. This was fixed so that user space could parse this
properly.
But the reason that it had "%.*s" was because internally it provided
the maximum size of the string as one of the arguments. The fix that
replaced "%.*s" with "%s" caused the trace output (when the kernel
reads the event) to write "(efault)" as it would now read the length
of the string as "%s".
As the string provided is always nul terminated, there's no reason
for the internal code to use "%.*s" anyway. Just remove the length
argument to match the "%s" that is now in the format.
- Fix the ftrace subops hash logic of the manager ops hash
The function_graph uses the ftrace subops code. The subops code is a
way to have a single ftrace_ops registered with ftrace to determine
what functions will call the ftrace_ops callback. More than one user
of function graph can register a ftrace_ops with it. The function
graph infrastructure will then add this ftrace_ops as a subops with
the main ftrace_ops it registers with ftrace. This is because the
functions will always call the function graph callback which in turn
calls the subops ftrace_ops callbacks.
The main ftrace_ops must add a callback to all the functions that the
subops want a callback from. When a subops is registered, it will
update the main ftrace_ops hash to include the functions it wants.
This is the logic that was broken.
The ftrace_ops hash has a "filter_hash" and a "notrace_hash" where
all the functions in the filter_hash but not in the notrace_hash are
attached by ftrace. The original logic would have the main ftrace_ops
filter_hash be a union of all the subops filter_hashes and the main
notrace_hash would be a intersect of all the subops filter hashes.
But this was incorrect because the notrace hash depends on the
filter_hash it is associated to and not the union of all
filter_hashes.
Instead, when a subops is added, just include all the functions of
the subops hash that are in its filter_hash but not in its
notrace_hash. The main subops hash should not use its notrace hash,
unless all of its subops hashes have an empty filter_hash (which
means to attach to all functions), and then, and only then, the main
ftrace_ops notrace hash can be the intersect of all the subops
hashes.
This not only fixes the bug, but also simplifies the code.
- Add a selftest to better test the subops filtering
Add a selftest that would catch the bug fixed by the above change.
- Fix extra newline printed in function tracing with retval
The function parameter code changed the output logic slightly and
called print_graph_retval() and also printed a newline. The
print_graph_retval() also prints a newline which caused blank lines
to be printed in the function graph tracer when retval was added.
This caused one of the selftests to fail if retvals were enabled.
Instead remove the new line output from print_graph_retval() and have
the callers always print the new line so that it doesn't have to do
special logic if it calls print_graph_retval() or not.
- Fix out-of-bound memory access in the runtime verifier
When rv_is_container_monitor() is called on the last entry on the
link list it references the next entry, which is the list head and
causes an out-of-bound memory access.
* tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix out-of-bound memory access in rv_is_container_monitor()
ftrace: Do not have print_graph_retval() add a newline
tracing/selftest: Add test to better test subops filtering of function graph
ftrace: Fix accounting of subop hashes
ftrace: Properly merge notrace hashes
tracing: Do not add length to print format in synthetic events
tracing: Hide get_vm_area() from MMUless builds
-----BEGIN PGP SIGNATURE-----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=Mezb
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Followup fixes for resilient spinlock (Kumar Kartikeya Dwivedi):
- Make res_spin_lock test less verbose, since it was spamming BPF
CI on failure, and make the check for AA deadlock stronger
- Fix rebasing mistake and use architecture provided
res_smp_cond_load_acquire
- Convert BPF maps (queue_stack and ringbuf) to resilient spinlock
to address long standing syzbot reports
- Make sure that classic BPF load instruction from SKF_[NET|LL]_OFF
offsets works when skb is fragmeneted (Willem de Bruijn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Convert ringbuf map to rqspinlock
bpf: Convert queue_stack map to rqspinlock
bpf: Use architecture provided res_smp_cond_load_acquire
selftests/bpf: Make res_spin_lock AA test condition stronger
selftests/net: test sk_filter support for SKF_NET_OFF on frags
bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags
selftests/bpf: Make res_spin_lock test less verbose
When rv_is_container_monitor() is called on the last monitor in
rv_monitors_list, KASAN yells:
BUG: KASAN: global-out-of-bounds in rv_is_container_monitor+0x101/0x110
Read of size 8 at addr ffffffff97c7c798 by task setup/221
The buggy address belongs to the variable:
rv_monitors_list+0x18/0x40
This is due to list_next_entry() is called on the last entry in the list.
It wraps around to the first list_head, and the first list_head is not
embedded in struct rv_monitor_def.
Fix it by checking if the monitor is last in the list.
Cc: stable@vger.kernel.org
Cc: Gabriele Monaco <gmonaco@redhat.com>
Fixes: cb85c660fc ("rv: Add option for nested monitors and include sched")
Link: https://lore.kernel.org/e85b5eeb7228bfc23b8d7d4ab5411472c54ae91b.1744355018.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The retval and retaddr options for function_graph tracer will add a
comment at the end of a function for both leaf and non leaf functions that
looks like:
__wake_up_common(); /* ret=0x1 */
} /* pick_next_task_fair ret=0x0 */
The function print_graph_retval() adds a newline after the "*/". But if
that's not called, the caller function needs to make sure there's a
newline added.
This is confusing and when the function parameters code was added, it
added a newline even when calling print_graph_retval() as the fact that
the print_graph_retval() function prints a newline isn't obvious.
This caused an extra newline to be printed and that made it fail the
selftests when the retval option was set, as the selftests were not
expecting blank lines being injected into the trace.
Instead of having print_graph_retval() print a newline, just have the
caller always print the newline regardless if it calls print_graph_retval()
or not. This not only fixes this bug, but it also simplifies the code.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250411133015.015ca393@gandalf.local.home
Reported-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/ccc40f2b-4b9e-4abd-8daf-d22fce2a86f0@sirena.org.uk/
Fixes: ff5c9c576e ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function graph infrastructure uses ftrace to hook to functions. It has
a single ftrace_ops to manage all the users of function graph. Each
individual user (tracing, bpf, fprobes, etc) has its own ftrace_ops to
track the functions it will have its callback called from. These
ftrace_ops are "subops" to the main ftrace_ops of the function graph
infrastructure.
Each ftrace_ops has a filter_hash and a notrace_hash that is defined as:
Only trace functions that are in the filter_hash but not in the
notrace_hash.
If the filter_hash is empty, it means to trace all functions.
If the notrace_hash is empty, it means do not disable any function.
The function graph main ftrace_ops needs to be a superset containing all
the functions to be traced by all the subops it has. The algorithm to
perform this merge was incorrect.
When the first subops was added to the main ops, it simply made the main
ops a copy of the subops (same filter_hash and notrace_hash).
When a second ops was added, it joined the new subops filter_hash with the
main ops filter_hash as a union of the two sets. The intersect between the
new subops notrace_hash and the main ops notrace_hash was created as the
new notrace_hash of the main ops.
The issue here is that it would then start tracing functions than no
subops were tracing. For example if you had two subops that had:
subops 1:
filter_hash = '*sched*' # trace all functions with "sched" in it
notrace_hash = '*time*' # except do not trace functions with "time"
subops 2:
filter_hash = '*lock*' # trace all functions with "lock" in it
notrace_hash = '*clock*' # except do not trace functions with "clock"
The intersect of '*time*' functions with '*clock*' functions could be the
empty set. That means the main ops will be tracing all functions with
'*time*' and all "*clock*" in it!
Instead, modify the algorithm to be a bit simpler and correct.
First, when adding a new subops, even if it's the first one, do not add
the notrace_hash if the filter_hash is not empty. Instead, just add the
functions that are in the filter_hash of the subops but not in the
notrace_hash of the subops into the main ops filter_hash. There's no
reason to add anything to the main ops notrace_hash.
The notrace_hash of the main ops should only be non empty iff all subops
filter_hashes are empty (meaning to trace all functions) and all subops
notrace_hashes include the same functions.
That is, the main ops notrace_hash is empty if any subops filter_hash is
non empty.
The main ops notrace_hash only has content in it if all subops
filter_hashes are empty, and the content are only functions that intersect
all the subops notrace_hashes. If any subops notrace_hash is empty, then
so is the main ops notrace_hash.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Andy Chiu <andybnac@gmail.com>
Link: https://lore.kernel.org/20250409152720.216356767@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
