Fix the typo "clocks-names" to "clock-names" in the allOf/if conditional
blocks.
Fixes: 9be5c47908 ("dt-bindings: display/msm: expand to support MST")
Fixes: 7403e87c13 ("dt-bindings: display: msm: Fix reg ranges and clocks on Glymur")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/721682/
Message-ID: <20260428100338.3179722-1-prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
After 4 missed beacons since last Rx, the firmware will send an NDP to the
AP. If the NDP is ACK'ed, it'll reset the missed_beacons_since_last_rx
counter.
Disconnecting after 4 beacons doesn't give enough time to the firmware
to send the NDP.
Wait until we get 6 missed beacons since last Rx before disconnecting.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260515151352.c4ed0d849f98.Iefa2e8be9edfc74683997eea60bb53c2002f31f0@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Clearly, from a user perspective, it must be valid to configure
WoWLAN (which can include network detection) and then suspend
while not connected to a network, or even without an interface
at all (WoWLAN config is handled on a per-wiphy basis). Since
mac80211 doesn't distinguish these cases and simply calls the
driver to suspend whenever WoWLAN is configured, the driver has
to cleanly handle the case where it's called for WoWLAN but no
(BSS) interface exists.
Remove the WARN_ON(), move the print so it doesn't get done in
this case, and keep returning 1 to disconnect everything.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260515151352.0c55d1135409.I54f8be0e2aa28cfb1cb1dcf3b2d2d8fe75b4397b@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
CNVI_PMU_STEP_FLOW is a PRPH register, not a UMAC PRPH register.
Use iwl_read_prph() instead of iwl_read_umac_prph() to read it
correctly.
Signed-off-by: Moriya Itzchaki <moriya.itzchaki@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260515151352.3a69fa2dbda7.I8d96635a9c06a835b05a10b6d66c8a9299676246@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
On old devices such as 7265D, rates are still encoded in version 1
format, which doesn't use the CCK/OFDM rate index (0-3/0-7) but
rather their PLCP value (e.g. 10 for 1 Mbps CCK rate.)
While introducing v3 rates, I changed the driver from internally
handling v1 rates and converting to v2, to internally handling v3
and converting to v1 or v2 according to the firmware. I accordingly
changed the code in iwl_mvm_mac80211_idx_to_hwrate() to no longer
have different values for different APIs. This was correct.
However, I later reverted this part of the change, because it was
reported that I had broken beacon rates, causing a FW assert/crash.
This caused TX_CMD rates to be set incorrectly, potentially causing
a warning when reported back from the device as having been used.
Fix this (hopefully correctly now) by handling beacon rates in the
TX_CMD that's embedded in the beacon template command separately.
Restore iwl_mvm_mac80211_idx_to_hwrate() to return only the rate
index, not PLCP value, fixing the real TX_CMD.
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260515151351.7407e293dff7.I4ea1a17f8fe99c933d3f3e30d077cf4246125c3e@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
In iwl_mld_remove_link, the link->fw_id is saved at the beginning of the
function so we have it after we freed the link.
But the link pointer can be NULL, and is not checked when the fw_id is
stored.
Fix it by simply freeing the link at the end of the function.
fFixes: 0e66a39f4f0e ("wifi: iwlwifi: fix potential use after free in iwl_mld_remove_link()")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260515151351.371f40fc6711.I6a82cfe9655564e9c5731af91c36493b26b1208e@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
When iwlwifi firmware crashes (e.g., NMI_INTERRUPT_UNKNOWN on Intel
BE201/Wi-Fi 7), iwl_mld_nic_error() sets mld->fw_status.in_hw_restart
to true. However, iwl_mld_tx_from_txq() does not check this flag before
dequeuing frames from mac80211 and pushing them to the transport layer.
Since the firmware is dead, iwl_trans_tx() returns -EIO for each frame,
which then gets freed immediately. Under high-throughput conditions
(e.g., Tailscale UDP traffic or active SSH sessions), this creates a
tight dequeue-send-fail-free loop that wastes CPU cycles and generates
rapid skb allocation churn, leading to memory pressure from slab
fragmentation.
The RX path already has this guard (iwl_mld_rx_mpdu checks
in_hw_restart at rx.c:1906), and so does the TXQ allocation worker
(iwl_mld_add_txqs_wk at tx.c:156). Add the same guard to
iwl_mld_tx_from_txq() to stop all TX during firmware restart.
Frames left in mac80211's TXQs are naturally drained after restart
completes, when queue reallocation triggers iwl_mld_tx_from_txq()
via iwl_mld_add_txq_list(), or when new upper-layer traffic invokes
wake_tx_queue.
Tested on ASUS Zenbook 14 UX3405CA with Intel BE201 (Wi-Fi 7) on
kernel 6.19.5 where the firmware crashes approximately every 10-15
minutes under Tailscale traffic.
Fixes: d1e879ec60 ("wifi: iwlwifi: add iwlmld sub-driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sheroz Juraev <goodmartiandev@gmail.com>
Link: https://patch.msgid.link/20260315081221.2678478-1-goodmartiandev@gmail.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
When the TLC notification disables AMSDU for a TID, the MLD driver sets
max_tid_amsdu_len to the sentinel value 1. The TSO segmentation path in
iwl_mld_tx_tso_segment() checks for zero but not for this sentinel,
allowing it to reach the num_subframes calculation:
num_subframes = (max_tid_amsdu_len + pad) / (subf_len + pad)
= (1 + 2) / (1534 + 2) = 0
This zero propagates to iwl_tx_tso_segment() which sets:
gso_size = num_subframes * mss = 0
Calling skb_gso_segment() with gso_size=0 creates over 32000 tiny
segments from a single GSO skb. This floods the TX ring with ~1024
micro-frames (the rest are purged), creating a massive burst of TX
completion events that can lead to memory corruption and a subsequent
use-after-free in TCP's retransmit queue (refcount underflow in
tcp_shifted_skb, NULL deref in tcp_rack_detect_loss).
The MVM driver is immune because it checks mvmsta->amsdu_enabled before
reaching the num_subframes calculation. The MLD driver has no equivalent
bitmap check and relies solely on max_tid_amsdu_len, which does not
catch the sentinel value.
Fix this by detecting the sentinel value (max_tid_amsdu_len == 1) at the
existing check and falling back to non-AMSDU TSO segmentation. Also add
a WARN_ON_ONCE guard after the num_subframes division as defense-in-depth
to catch any future code paths that produce zero through a different
mechanism.
Suggested-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Fixes: d1e879ec60 ("wifi: iwlwifi: add iwlmld sub-driver")
Signed-off-by: Cole Leavitt <cole@unwrap.rs>
Link: https://patch.msgid.link/20260405054145.1064152-3-cole@unwrap.rs
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
The kernel-doc comment for batadv_skb_is_frag() contained two errors:
* the function description referred to "gain a unicast packet" instead
of "contains unicast fragment".
* the Return section omitted "merged" from "newly skb", leaving the
description grammatically incorrect and inconsistent with the
function description.
Fixes: bc62216dc8 ("batman-adv: frag: disallow unicast fragment in fragment")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
During initialisation in remote_test_load(), if one of the
simple_ring_buffer fails to initialise, the error path attempts to
rollback initialised buffers. However, the rollback incorrectly uses the
global pointer to the trace descriptor, which is only set upon
successful load completion. Fix the error path by using the local
pointer to the descriptor.
Link: https://patch.msgid.link/20260515201616.337469-1-vdonnefort@google.com
Fixes: ea908a2b79 ("tracing: Add a trace remote module for testing")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
base-commit: 5d6919055d
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
IORING_OP_WAITID stores its result fields in struct io_waitid::info and
later copies them to userspace siginfo. The prep path initializes the
request arguments, but it does not initialize info itself.
If the wait operation completes without reporting a child event, the common
wait code can return without writing wo_info. In that case io_waitid_finish()
still copies iw->info to userspace, exposing stale bytes from the reused
io_kiocb command storage.
Clear the result storage during prep so the io_uring path matches the
regular waitid syscall, which uses a zero-initialized struct waitid_info.
Fixes: f31ecf671d ("io_uring: add IORING_OP_WAITID support")
Cc: stable@vger.kernel.org # 6.7+
Signed-off-by: Heechan Kang <gganji11@naver.com>
Link: https://patch.msgid.link/20260516184709.852814-1-gganji11@naver.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sashiko reports:
lm90_alert() executes in the smbus alert context and calls
lm90_update_confreg() to disable the hardware alert line, without
acquiring hwmon_lock.
Concurrently, sysfs write operations (such as lm90_write_convrate) hold
the hwmon_lock, temporarily modify data->config, and then restore it.
If an alert interrupt occurs concurrently with a sysfs write, the sysfs
path will overwrite the alert handler's modifications to data->config
and the hardware register.
This unintentionally re-enables the hardware alert line while the alarm is
still active, causing an interrupt storm.
Add the missing lock to lm90_alert() to solve the problem.
Fixes: 7a1d220ccb ("hwmon: (lm90) Introduce function to update configuration register")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Sashiko reports:
In lm90_probe(), the devm action to cancel the alert_work and report_work
(lm90_restore_conf) is registered in lm90_init_client() before
devm_hwmon_device_register_with_info() is called.
Because devm executes cleanup actions in reverse order during module
unbind or probe failure, the hwmon device is unregistered and freed first.
If lm90_alert_work() or lm90_report_alarms() runs in the window between
the hwmon device being freed and the delayed works being cancelled,
lm90_update_alarms() will dereference the freed data->hwmon_dev here.
Fix the problem by canceling the workers separately after registering
the hwmon device and before registering the interrupt handler. This ensures
that the workers are canceled after interrupts are disabled and before
the hwmon device is released. Add "shutdown" flag to indicate that device
shutdown is in progress to prevent workers from being re-armed.
Fixes: f6d0775119 ("hwmon: (lm90) Rework alarm/status handling")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Mirror of Mark Brown's ASoC: hdac_hdmi rate-limit patch (commit
[lkml.kernel.org/lkml/2025/6/13/1380]) for the generic snd_parse_eld()
helper used by ASoC hdmi-codec.
When a HDMI sink is disconnected (e.g. a board with two HDMI outputs and
only one cable), userspace audio servers like PipeWire keep probing the
disconnected card and trigger:
HDMI: Unknown ELD version 0
at every probe — easily 30+ messages per burst on rk3588. The same
applies to malformed ELD (MNL out of range). Both conditions are
expected when no sink is attached; rate-limit the dev_info() so the
kernel ring buffer does not fill up.
Signed-off-by: Francesco Saverio Pavone <pavone.lawyer@gmail.com>
Link: https://patch.msgid.link/20260516141244.21801-1-pavone.lawyer@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snapshotting code internally aligns data segment to 16 bytes. This
works fine for DPU code (where most of the regions are aligned), but
fails for snapshotting of the DSI data (because DSI data region is
shifted by 4 bytes). Fix the code by removing length alignment and by
accurately printing last registers in the region. While reworking the
code also fix the 16x memory overallocation in
msm_disp_state_dump_regs().
Fixes: 98659487b8 ("drm/msm: add support to take dpu snapshot")
Reported-by: Salendarsingh Gaud <sgaud@qti.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/725449/
Message-ID: <20260516-msm-fix-dsi-dump-2-v2-1-9e49fb2d240e@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Heiko reported that BIOS on some recent machines doesn't set up PCI
SSID properly but leave with zero (e.g. on HP Dragonfly Folio 13.5
inch G3 with SSID 103c:8a05/8a06), which confuses the quirk table
matching and results in the non-functional state.
Fix it by skipping the PCI SSID matching when either vendor or device
ID is zero and falling back to the codec SSID that is supposed to be
more stable for those cases.
Reported-by: Heiko Schmid <heiko@future-machines.org>
Tested-by: Heiko Schmid <heiko@future-machines.org>
Closes: https://lore.kernel.org/20260514133110.12302-1-heiko@future-machines.org
Link: https://patch.msgid.link/20260515105700.276420-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP 250 15.6 inch G10 Notebook PC uses the same ALC236 codec
as the HP 255 15.6 inch G10 (103c:8b2f) and requires the same
fixup to enable the internal speaker EAPD and microphone routing.
Signed-off-by: Sergio Boglione <sboglione@gmail.com>
Link: https://patch.msgid.link/20260516131651.143109-1-sboglione@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These devices were incorrectly using the ALC287_FIXUP_TAS2781_I2C quirk
leading to errors:
[ 18.765990] Serial bus multi instantiate pseudo device driver TXNW2781:00: error -ENXIO: IRQ index 0 not found
[ 18.768153] Serial bus multi instantiate pseudo device driver TXNW2781:00: error -ENXIO: IRQ index 0 not found
[ 18.768476] Serial bus multi instantiate pseudo device driver TXNW2781:00: error -ENXIO: IRQ index 0 not found
[ 18.768899] Serial bus multi instantiate pseudo device driver TXNW2781:00: Instantiated 3 I2C devices.
Use the ALC287_FIXUP_TXNW2781_I2C quirk instead to fix this and restore
speaker audio on affected devices.
Fixes: 1e9c708dc3 ("ALSA: hda/tas2781: Add new quirk for Lenovo, ASUS, Dell projects")
Link: https://lore.kernel.org/59fd4aa4-76b9-4984-8db9-a60e55ec6e80@losource.net/
Closes: https://lore.kernel.org/CACB9z7kjs8rhLstEc8fV29BCTb5dd881JwGozoKdO5cwCb=YwQ@mail.gmail.com
Signed-off-by: Eric Naim <dnaim@cachyos.org>
Link: https://patch.msgid.link/20260516111532.111463-1-dnaim@cachyos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
br_pass_frame_up() rewrites skb->dev from the ingress port to the bridge
master before queueing bridge LOCAL_IN packets. NFQUEUE only holds
references on state.in/out and bridge physdevs, so a queued bridge
packet can retain a freed bridge master in skb->dev until reinjection.
When the verdict is reinjected later, br_netif_receive_skb() re-enters
the receive path with skb->dev still pointing at the freed bridge master,
triggering a use-after-free.
Store skb->dev in the queue entry, hold a reference on it for the queue
lifetime, and use the saved device when dropping queued packets during
NETDEV_DOWN handling.
Fixes: ac28634456 ("netfilter: bridge: add nf_afinfo to enable queuing to userspace")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Haoze Xie <royenheart@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The "pos" structure member of struct hbucket stores the first
free slot in the hash bucket of a hash type of set and there
are concurrent readers/writers. Annotate accesses properly.
Fixes: 18f84d41d3 ("netfilter: ipset: Introduce RCU locking in hash:* types")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When adding a new entry to the next position in the existing hash bucket,
the position index was incremented too early and parallel dump could
read it before the entry was populated with the value. Move the setting
of the position index after populating the entry.
v2: Position counting fixed, noticed by Florian Westphal.
Fixes: 18f84d41d3 ("netfilter: ipset: Introduce RCU locking in hash:* types")
Reported-by: syzbot+786c889f046e8b003ca6@syzkaller.appspotmail.com
Reported-by: syzbot+1da17e4b41d795df059e@syzkaller.appspotmail.com
Reported-by: syzbot+421c5f3ff8e9493084d9@syzkaller.appspotmail.com
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The "ipset list -terse" command is actually a dump operation which
may run parallel with "ipset add" commands, which can trigger an
internal resizing of the hash type of sets just being dumped. However,
dumping just the header part of the set was not protected against
underlying resizing. Fix it by protecting the header dumping part
as well.
Fixes: c4c997839c ("netfilter: ipset: Fix parallel resizing and listing of the same set")
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
struct ip6t_opts stores at most IP6T_OPTS_OPTSNR option descriptors,
but hbh_mt6_check() does not reject larger optsnr values supplied from
userspace.
Validate optsnr in the rule setup path so only match data that fits the
fixed-size opts array can be installed. This follows the existing xtables
pattern of rejecting invalid user-provided counts in checkentry() and
keeps the packet matching path unchanged.
`struct ip6t_opts` has a fixed `opts[IP6T_OPTS_OPTSNR]` array,
where `IP6T_OPTS_OPTSNR` is 16, then off-by-one array access is possible:
[ 137.924693][ T8692] UBSAN: array-index-out-of-bounds in ../net/ipv6/netfilter/ip6t_hbh.c:110:29
[ 137.926167][ T8692] index 16 is out of range for type '__u16 [16]'
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Quoting sashiko:
In the error path, local_bh_enable() is called before
local_unlock_nested_bh().
Fixes: ba36fada9a ("netfilter: nft_inner: Use nested-BH locking for nft_pcpu_tun_ctx")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The following hash set variants:
hash:ip,mark
hash:ip,port
hash:ip,port,ip
hash:ip,port,net
iterate IPv4 ranges with a 32-bit iterator.
The iterator must stop once the last address in the requested range has
been processed. Advancing it once more can move the traversal state past
the end of the request, so a later retry may continue from an unintended
position.
Handle the iterator increment explicitly at the end of the loop and stop
once the upper bound has been processed. This keeps the existing retry
behaviour intact for valid ranges while preventing traversal from
continuing past the original boundary.
Fixes: 48596a8ddc ("netfilter: ipset: Fix adding an IPv4 range containing more than 2^31 addresses")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Nan Li <tonanli66@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In nft_inner_parse_l2l3(), when processing inner IPv6 packets,
ipv6_find_hdr() correctly computes the transport header offset
traversing all extension headers, but the result is immediately
overwritten with nhoff + sizeof(_ip6h) (40 bytes), which only
accounts for the IPv6 base header. This creates a desync between
inner_thoff (wrong — points to extension header start) and l4proto
(correct — e.g., IPPROTO_TCP), enabling transport header forgery
and potential firewall bypass. This issue affects stable versions
from Linux 6.2.
For comparison, the normal (non-inner) IPv6 path correctly
preserves ipv6_find_hdr()'s result. Removing the incorrect overwrite
ensures that ipv6_find_hdr()'s calculated transport header offset is
preserved, thereby fixing the desynchronization.
Fixes: 3a07327d10 ("netfilter: nft_inner: support for inner tunnel header matching")
Cc: stable@vger.kernel.org
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Assisted-by: GLM:5.1 Z.ai
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When dumping sets in order to create the proper order for restore,
the list type of sets dumped last. Therefore internally we run the
dumping loop twice: first with all non-list type of sets and skipping
the list type ones and then secondly for the list type of sets.
Sashiko noticed that there's a potential race between dump and destroy
if in the first loop the last set was a list type of set: its pointer
remains unreferenced and a concurrent destroy can free it.
Fix the issue by resetting the variable holding the pointer.
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Sashiko points out that unprivileged user can frequently
call ip_vs_flush() or ip_vs_del_service() to trigger
svc_table_changes updates that can lead to infinite loop
in ip_vs_dst_event(). This can also happen if the user
triggers frequent table resizing without deleting all
services. We should also consider the possible effects
if the user triggers many NETDEV_DOWN events.
One way to solve it is to hold svc_resize_sem in
ip_vs_dst_event() but this can block the dev notifier
during the whole resizing process.
Instead, use new rw_semaphore svc_replace_sem to protect just
the svc_table replacement which is a short code section.
Then hold svc_replace_sem in ip_vs_dst_event() to serialize
with replacing the svc_table. As result, loop is avoided
as there is no need to repeat the table walking from the
start. By this way changes in svc_table_changes can happen
only when all services are removed and all dev references
dropped which allows us to abort the table walking.
As IP_VS_WORK_SVC_NORESIZE is the flag used to stop the
svc_resize_work under service_mutex, we should check only
this flag often but not while under service_mutex.
To remove the mutex_trylock() for service_mutex in the
second phase where the resizer installs the new table
after rehashing, we will avoid holding the service_mutex
there. As result, the code in configuration context which
is under service_mutex should access ipvs->svc_table under
RCU because it can be replaced at anytime and released
after a RCU grace period. As for ip_vs_zero_all(), it needs
different solution as a table walker which can escape
single RCU read-side critical section: to hold the
svc_replace_sem to prevent table to be replaced.
In ip_vs_status_show() prefer to hold svc_replace_sem
to avoid many loops, just detect if the svc_table is
removed.
Prefer the newly attached table for the u_thresh/l_thresh
checks to know when to grow/shrink while adding or deleting
services because the new table size is based on the latest
parameters.
Link: https://sashiko.dev/#/patchset/20260505001648.360569-1-pablo%40netfilter.org
Fixes: 840aac3d90 ("ipvs: use resizable hash table for services")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reported by sashiko: there is a small race window.
If a helper module is unloaded or a userspace-defined helper is
removed, nf_conntrack_helper_unregister() sets ->helper to NULL.
Handle this safely. This needs a second patch to close related
race during nf_conntrack_helper_unregister().
Fixes: b20ab9cc63 ("netfilter: nf_ct_helper: better logging for dropped packets")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The ASUS Zenbook S16 (UM5606GA) with AMD Ryzen AI 9 465 (Strix Point,
ACP 7.0) has a BIOS that incorrectly sets the ACPI property
'acp-audio-config-flag' to 0x10 (FLAG_AMD_LEGACY_ONLY_DMIC) for the ACP
device. This prevents snd_pci_ps from probing the SoundWire bus, resulting
in no internal audio (dummy output only).
The hardware uses a Cirrus Logic CS42L43 (headphone/jack) and four CS35L56
smart amplifiers (speakers), all on SoundWire link 1. The corresponding
machine table entry (acp70_cs42l43_l1u0_cs35l56x4_l1u0123) already exists
in amd-acp70-acpi-match.c and correctly describes this topology.
Add a DMI quirk to override the flag to 0, consistent with the existing
entry for the HN7306EA.
Signed-off-by: Jasper Smet <josbeir@gmail.com>
Link: https://patch.msgid.link/20260513052137.56703-1-josbeir@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When DMA read times out in mtk_snand_read_page_cache(), the original code
erroneously jumped to cleanup label which skips DMA unmapping and ECC
disable, causing a resource leak.
Fixes: 764f1b7481 ("spi: add driver for MTK SPI NAND Flash Interface")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260510-snfi-v1-1-bc375cf1af8e@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_kasprintf() can fail and return NULL. The legacy AMD SoundWire
machine driver logs cpus->dai_name before checking the allocation result.
Move the debug print after the NULL check, matching the ordering used by
the SOF AMD SoundWire path after commit 5726b68473 ("ASoC: amd/sdw_utils:
avoid NULL deref when devm_kasprintf() fails").
Fixes: 2981d9b078 ("ASoC: amd: acp: add soundwire machine driver for legacy stack")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260511-asoc-amd-acp-sdw-legacy-dai-name-null-v1-1-dc6151b6da8a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Old DSP firmware versions use 32-bit address arithmetic and size for
validating the PCM buffer address range. If a buffer is allocated near
the top of the 32-bit address space, arithmetic calculations involving
the end address can overflow and fail checks.
Work around this by increasing the preallocated PCM buffer size by one
page. The DSP is still passed the usable buffer size, excluding the extra
page, which prevents the firmware from seeing an end address that crosses
the 32-bit boundary.
This was not hit before because PCM buffer allocation and DSP-side
mapping happened at different points, and the size mapped on the DSP was
usually nperiods * period_size. Therefore the mapped size was unlikely to
match the full preallocated buffer size exactly, although the issue was
still possible. With early buffer mapping on the DSP, the full
preallocated buffer is mapped during PCM creation, making the failure
reproducible at boot.
Fixes: 8ea6e25c85 ("ASoC: qcom: q6apm: Add support for early buffer mapping on DSP")
Cc: Stable@vger.kernel.org
Reported-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Closes: https://lore.kernel.org/all/7f10abbd-fb78-4c3a-ab90-7ca78239891a@oldschoolsolutions.biz/
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Link: https://patch.msgid.link/20260514090607.2435484-1-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HSR node-list and node-status generic-netlink operations run under
rcu_read_lock(). They walk hsr->node_db through hsr_get_next_node() and
hsr_get_node_data(), but RTM_DELLINK teardown removes the same node table
with plain list_del() and frees each node immediately.
That lets a generic-netlink reader hold a struct hsr_node pointer across
hsr_dellink(). In a KASAN build, widening the reader window after
hsr_get_next_node() obtains the node reproduces a slab-use-after-free
when the reader copies node->macaddress_A; the freeing stack is
hsr_del_nodes() from hsr_dellink().
Use list_del_rcu() and defer the free through the existing
hsr_free_node_rcu() callback. This matches the lifetime rule used by the
HSR prune paths, which already delete nodes with list_del_rcu() and
call_rcu().
Fixes: b9a1e62740 ("hsr: implement dellink to clean up resources")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260513233838.3064715-2-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a large message is fragmented into multiple skbs, the zerocopy
uarg is only allocated and attached to the last skb in the loop.
Non-final skbs carry pinned user pages with no completion tracking,
so the kernel has no way to notify userspace when those pages are safe
to reuse. If the loop breaks early the uarg is never allocated at all,
leaking pinned pages with no completion notification.
Fix this by following the approach used by TCP: allocate the zerocopy
uarg (if not provided by the caller) before the send loop and attach
it to every skb via skb_zcopy_set(), which takes a reference per skb.
Each skb's completion properly decrements the refcount, and the
notification only fires after the last skb is freed.
On failure, if no data was sent, the uarg is cleanly aborted via
net_zcopy_put_abort().
This issue was initially discovered by sashiko while reviewing commit
1cb36e2522 ("vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting")
but was pre-existing.
Fixes: 581512a6dc ("vsock/virtio: MSG_ZEROCOPY flag support")
Closes: https://sashiko.dev/#/patchset/20260420132051.217589-1-sgarzare%40redhat.com
Reported-by: Maher Azzouzi <maherazz04@gmail.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Link: https://patch.msgid.link/20260514092948.268720-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cgx_speed_mbps has 13 elements but RESP_LINKSTAT_SPEED can yield values
0-15. If it returns a value >= 13, this causes an out-of-bounds array
access. Add a bounds check and default to speed 0 if the index is out of
range.
Fixes: 61071a871e ("octeontx2-af: Forward CGX link notifications to PFs")
Cc: Sunil Goutham <sgoutham@marvell.com>
Cc: Linu Cherian <lcherian@marvell.com>
Cc: Geetha sowjanya <gakula@marvell.com>
Cc: hariprasad <hkelam@marvell.com>
Cc: Subbaraya Sundeep <sbhatta@marvell.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: stable <stable@kernel.org>
Signed-off-by: Sam Daly <sam@samdaly.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026051352-refined-demise-e88d@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit in the fixes tag added a warning for devices
that are netdev ops locked that they should be converted
to .ndo_set_rx_mode_async. IPoIB for mlx5 is such a
driver which was missed during the conversion because the
flow is more complex:
- mlx5 part of IPoIB device was converted to ops-lock in commit [1].
- ipoib_intf_init() then overrides netdev_ops with
ipoib_netdev_ops_{pf,vf}, which still wired ndo_set_rx_mode to the
legacy sync path -- tripping the new warning on every probe.
So now we have the following splat:
netdevice: ib0 (uninitialized): ops-locked drivers should use ndo_set_rx_mode_async
WARNING: net/core/dev.c:11366 at register_netdevice+0x83c/0x21d0
...
register_netdev+0x1f/0x40
ipoib_add_one+0x35c/0x880 [ib_ipoib]
This patch implements .ndo_set_rx_mode_async but it simply schedules the
multicast restart task like before. This is done to maintain the
assumption that this task and others [2] must run on the same order
workqueue to avoid racing with themselves. The race between
ipoib_mcast_join_task() and ipoib_mcast_restart_task() would be the most
obvious example.
[1] 8f7b00307b, "net/mlx5e: Convert mlx5 netdevs to instance locking")
[2] ipoib_mcast_join_task, ipoib_mcast_restart_task,
ipoib_mcast_carrier_on_task, ipoib_reap_ah, ipoib_reap_neigh
Fixes: 3cbd229388 ("net: warn ops-locked drivers still using ndo_set_rx_mode")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://patch.msgid.link/20260513124519.3357165-1-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
core:
- fix for the fix for the handle change race.
ttm:
- avoid infinite loop in swap out
- avoid infinite loop in BO shrinking
- convert -EAGAIN from dmem_cgroup_try_charge to -ENOSPC
bridge:
- imx8qxp-pxl2dpi: avoid ERR_PTR with device_node cleanup
i915:
- Skip __i915_request_skip() for already signaled requests
- Fix VSC dynamic range signaling for RGB formats [dp]
xe:
- Madvise fix around purgeability tracking
- Restore engine mask for specific blitter style
- Couple UAF fixes
- Drop unused ggtt_balloon field
amdgpu:
- Userq fixes
- DCN 3.2 fix
- RAS fix
- GC 12 fix
gma500:
- oaktrail_lvds: fix i2c handling
loongson:
- use managed cleanup for connector polling
panfrost:
- handle results from reservation locking correctly
qaic:
- check for integer overflows in mmap logic
rocket:
- handle results from reservation locking correctly
-----BEGIN PGP SIGNATURE-----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=eHJD
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2026-05-16' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes pull, small and all over fixes, mostly xe and amdgpu,
with some ttm and a core fix for the handle change pain.
core:
- fix for the fix for the handle change race
ttm:
- avoid infinite loop in swap out
- avoid infinite loop in BO shrinking
- convert -EAGAIN from dmem_cgroup_try_charge to -ENOSPC
bridge:
- imx8qxp-pxl2dpi: avoid ERR_PTR with device_node cleanup
i915:
- Skip __i915_request_skip() for already signaled requests
- Fix VSC dynamic range signaling for RGB formats [dp]
xe:
- Madvise fix around purgeability tracking
- Restore engine mask for specific blitter style
- Couple UAF fixes
- Drop unused ggtt_balloon field
amdgpu:
- Userq fixes
- DCN 3.2 fix
- RAS fix
- GC 12 fix
gma500:
- oaktrail_lvds: fix i2c handling
loongson:
- use managed cleanup for connector polling
panfrost:
- handle results from reservation locking correctly
qaic:
- check for integer overflows in mmap logic
rocket:
- handle results from reservation locking correctly"
* tag 'drm-fixes-2026-05-16' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
drm: Replace old pointer to new idr
drm/loongson: Use managed KMS polling
drm/ttm: Fix ttm_bo_shrink() infinite LRU walk on backup failure
drm/ttm: Convert -EAGAIN from dmem_cgroup_try_charge to -ENOSPC
drm/gma500/oaktrail_lvds: fix i2c adapter leaks on init
drm/gma500/oaktrail_lvds: fix hang on init failure
drm/gma500/oaktrail_hdmi: fix i2c adapter leak on setup
drm/xe: Drop unused ggtt_balloon field
accel/qaic: Add overflow check to remap_pfn_range during mmap
drm/i915/dp: Fix VSC dynamic range signaling for RGB formats
drm/i915: skip __i915_request_skip() for already signaled requests
drm/bridge: imx8qxp-pxl2dpi: avoid ERR_PTR with device_node cleanup
drm/amdgpu/gfx_v12_0: set gfx.rs64_enable from PFP header on GFX12
drm/amd/ras: Fix CPER ring debugfs read overflow
drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED
drm/amdgpu: fix userq hang detection and reset
drm/amdgpu: remove almost all calls to amdgpu_userq_detect_and_reset_queues
drm/amdgpu: rework amdgpu_userq_signal_ioctl v3
drm/amdgpu: remove deadlocks from amdgpu_userq_pre_reset
drm/xe/dma-buf: fix UAF with retry loop
...
Commit 5e28b7b944 introduced a logical error by failing to replace the
newly generated IDR pointer to old id's pointer at the correct location
within the "change handle" logic; this resulted in the issue reported by
syzbot [1].
Specifically, the new IDR object pointer is intended to replace the original
id's pointer during the normal execution flow.
Additionally, an unnecessary conditional check for the ret exit path has
been removed.
[1]
!RB_EMPTY_ROOT(&prime_fpriv->dmabufs)
WARNING: drivers/gpu/drm/drm_prime.c:224 at drm_prime_destroy_file_private+0x48/0x60 drivers/gpu/drm/drm_prime.c:224, CPU#0: syz.0.17/5833
Call Trace:
drm_file_free.part.0+0x7e6/0xcc0 drivers/gpu/drm/drm_file.c:269
drm_file_free drivers/gpu/drm/drm_file.c:237 [inline]
drm_close_helper.isra.0+0x186/0x200 drivers/gpu/drm/drm_file.c:290
drm_release+0x1ab/0x360 drivers/gpu/drm/drm_file.c:438
Fixes: 5e28b7b944 ("drm: Set old handle to NULL before prime swap in change_handle")
Reported-by: syzbot+d7c9eed171647e421013@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d7c9eed171647e421013
Cc: stable@vger.kernel.org
Tested-by: syzbot+d7c9eed171647e421013@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/tencent_C267296443AAA4567771176886DFF364A305@qq.com
raw_send_hdrinc() validates that the caller-supplied IPv4 header
fits within the message length:
iphlen = iph->ihl * 4;
err = -EINVAL;
if (iphlen > length)
goto error_free;
if (iphlen >= sizeof(*iph)) {
/* fix up saddr, tot_len, id, csum, transport_header */
}
It does not, however, reject ihl < 5. For such a packet the
"if (iphlen >= sizeof(*iph))" branch is skipped, leaving the
crafted iphdr untouched, but the packet is still handed to
__ip_local_out() and onward. Downstream consumers that read
iph->ihl assume a sane value: net/ipv4/ah4.c:ah_output() in
particular subtracts sizeof(struct iphdr) from top_iph->ihl * 4
and passes the (signed-int-negative, then cast to size_t)
result to memcpy(), producing an OOB access of length close to
SIZE_MAX and a host kernel panic.
An IPv4 header with ihl < 5 is malformed by definition (RFC 791:
"Internet Header Length is the length of the internet header in
32 bit words ... Note that the minimum value for a correct header
is 5."). The kernel should not be willing to inject such a
packet into its own output path.
Reject "iphlen < sizeof(*iph)" alongside the existing
"iphlen > length" check. This matches the principle that locally
constructed packets that re-enter the IP stack must pass the same
basic sanity tests that a foreign packet would be subjected to.
Once this lands, the "if (iphlen >= sizeof(*iph))" wrapper around
the fixup branch becomes redundant; left in place to keep the
patch minimal and backport-friendly. A follow-up can unwrap it.
Note that commit 86f4c90a1c ("ipv4, ipv6: ensure raw socket
message is big enough to hold an IP header") ensures the message
buffer is large enough to hold an iphdr, but does not constrain
the self-reported iph->ihl.
Reachability: the malformed packet source is any caller with
CAP_NET_RAW, including an unprivileged process in a user+net
namespace on a kernel with CONFIG_USER_NS=y. The reproduced AH
crash also requires a matching xfrm AH policy on the outgoing
route; a container granted CAP_NET_ADMIN can install that state
and policy in its netns. Loopback bypasses xfrm_output, so the
trigger uses a real netdev.
Reproduced on UML + KASAN: kernel-mode fault at addr 0x0 with
memcpy_orig at the crash site. Same shape reproduces inside a
rootless Docker container with --cap-add NET_ADMIN on a stock
distro kernel.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/77ec2b5e8111961c2c39883c92e8aa2709039c17.1778614451.git.michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix NULL dereference and a false-positive warning when the driver
probes hardware with surprising version numbers
- Fix writing values to the wrong registers when probing
cache-utilisation counters. Replace 'NRDY' probing with a version
that is robust for platforms where the bit is writeable by both
hardware and software
-----BEGIN PGP SIGNATURE-----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=mkSZ
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 MPAM fixes from Catalin Marinas:
- Fix NULL dereference and a false-positive warning when the driver
probes hardware with surprising version numbers
- Fix writing values to the wrong registers when probing
cache-utilisation counters. Replace 'NRDY' probing with a version
that is robust for platforms where the bit is writeable by both
hardware and software
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm_mpam: Check whether the config array is allocated before destroying it
arm_mpam: Fix false positive assert failure during mpam_disable()
arm_mpam: Improve check for whether or not NRDY is hardware managed
arm_mpam: Pretend that NRDY is always hardware managed
arm_mpam: Fix monitor instance selection when checking for hardware NRDY
Including:
- AMD-Vi:
- Add bounds checks to debugfs and table lookups
- Intel VT-d:
- Apply an existing quirk for Q35 graphic device.
- Skip dev_pasid teardown for the blocked domain to avoid out-of-bounds
access.
- Return early if dev_pasid is missing to prevent NULL dereference or
UAF.
- Core:
- Fix bugs and corner cases in the pci_dev_reset_iommu_prepare/done()
code. This are some bigger changes including some re-work,
hopefully okay for -rc.
- Fix various issues found by AI in iommupt code.
- MAINTAINERS email address update for RISCV IOMMU.
-----BEGIN PGP SIGNATURE-----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=k+yc
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
"This is probably the largest fixes pull-request ever sent for IOMMU. I
partially blame it on AI code review which found some issues but there
is also some rework in here to fix issues in the iommu parts of PCI
device reset.
AMD-Vi:
- Add bounds checks to debugfs and table lookups
Intel VT-d:
- Apply an existing quirk for Q35 graphic device
- Skip dev_pasid teardown for the blocked domain to avoid
out-of-bounds access
- Return early if dev_pasid is missing to prevent NULL dereference
or UAF
Core:
- Fix bugs and corner cases in pci_dev_reset_iommu_prepare/done()
- Fix various issues found by AI in iommupt code
MAINTAINERS email address update for RISCV IOMMU"
* tag 'iommu-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: update Tomasz Jeznach's email address
iommupt: Fix the end_index calculation in __map_range_leaf()
iommupt: Check for missing PAGE_SIZE in the pgsize_bitmap
iommu: Handle unmap error when iommu_debug is enabled
iommu: Fix up map/unmap debugging for iommupt domains
iommu: Fix loss of errno on map failure for classic ops
iommu/vt-d: Avoid NULL pointer dereference or refcount corruption
iommu/vt-d: Fix oops due to out of scope access
iommu/vt-d: Disable DMAR for Intel Q35 IGFX
iommu: Warn on premature unblock during DMA aliased sibling reset
iommu: Fix WARN_ON in __iommu_group_set_domain_nofail() due to reset
iommu: Fix ATS invalidation timeouts during __iommu_remove_group_pasid()
iommu: Fix nested pci_dev_reset_iommu_prepare/done()
iommu: Fix pasid attach in pci_dev_reset_iommu_prepare/done()
iommu: Replace per-group resetting_domain with per-gdev blocked flag
iommu: Fix kdocs of pci_dev_reset_iommu_done()
iommu: Fix NULL group->domain dereference in pci_dev_reset_iommu_done()
iommu/amd: Bounds-check devid in __rlookup_amd_iommu()
iommu/amd: Remove latent out-of-bounds access in IOMMU debugfs
- Convert vfio-pci BAR resource requests and iomaps initialization
from a lazy, on-demand model to an eager pre-allocation model to
avoid races while preserving legacy error behavior. Fix unchecked
barmap access in dma-buf export path. (Matt Evans)
- Introduce an implicit unsigned cast in converting vfio-pci device
offsets to region indexes, closing a potential out-of-bounds
access through the vfio_pci_ioeventfd() interface. (Matt Evans)
- Fix a dma-buf kref underflow and stuck wait_for_completion() when
closing a previously revoked dma-buf. (Alex Williamson)
-----BEGIN PGP SIGNATURE-----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=2Sn8
-----END PGP SIGNATURE-----
Merge tag 'vfio-v7.1-rc4' of https://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- Convert vfio-pci BAR resource requests and iomaps initialization
from a lazy, on-demand model to an eager pre-allocation model to
avoid races while preserving legacy error behavior. Fix unchecked
barmap access in dma-buf export path (Matt Evans)
- Introduce an implicit unsigned cast in converting vfio-pci device
offsets to region indexes, closing a potential out-of-bounds
access through the vfio_pci_ioeventfd() interface (Matt Evans)
- Fix a dma-buf kref underflow and stuck wait_for_completion() when
closing a previously revoked dma-buf (Alex Williamson)
* tag 'vfio-v7.1-rc4' of https://github.com/awilliam/linux-vfio:
vfio/pci: Check BAR resources before exporting a DMABUF
vfio/pci: Set up BAR resources and maps in vfio_pci_core_enable()
vfio/pci: Make VFIO_PCI_OFFSET_TO_INDEX() return unsigned
vfio/pci: fix dma-buf kref underflow after revoke
