The MAX96776/MAX96778 deserializers convert singleor
dual-link GMSL™ serial input to embedded DisplayPort
(eDP) v1.4a. 600MHz PCLK capability and decompression
of VESA 3:1 DSC v1.1 enable transport of 4K (UHD),
24-bit, 60fps video over a single coax or twisted pair
link. The MAX96776/MAX96778 also send and receive
sidechannel and peripheral control data to enable
full-duplex single-wire transmission of video and
bidirectional data.
Signed-off-by: Guochun Huang <hero.huang@rock-chips.com>
Change-Id: I3c07fc1053ae6080cb1cca1bfb9bca5fb38bb563
https://source.android.com/security/bulletin/2022-01-01
CVE-2022-24958
CVE-2022-20136
CVE-2022-23960
CVE-2022-20141
CVE-2021-4154
CVE-2022-20132
* tag 'ASB-2022-06-05_12-5.10': (1188 commits)
BACKPORT: net/sched: cls_u32: fix netns refcount changes in u32_change()
UPSTREAM: io_uring: always use original task when preparing req identity
FROMLIST: remoteproc: Fix dma_mem leak after rproc_shutdown
FROMLIST: dma-mapping: Add dma_release_coherent_memory to DMA API
ANDROID: Update QCOM symbol list for __reset_control_get
ANDROID: vendor_hooks: Add hooks for mutex
BACKPORT: can: ems_usb: ems_usb_start_xmit(): fix double dev_kfree_skb() in error path
BACKPORT: can: usb_8dev: usb_8dev_start_xmit(): fix double dev_kfree_skb() in error path
ANDROID: GKI: Update symbols to symbol list
ANDROID: oplus: Update the ABI xml and symbol list
UPSTREAM: remoteproc: Fix count check in rproc_coredump_write()
BACKPORT: esp: Fix possible buffer overflow in ESP transformation
ANDROID: Fix the drain_all_pages default condition broken by a hook
UPSTREAM: Revert "xfrm: xfrm_state_mtu should return at least 1280 for ipv6"
UPSTREAM: xfrm: fix MTU regression
ANDROID: signal: Add vendor hook for memory reaping
FROMGIT: usb: gadget: uvc: allow for application to cleanly shutdown
FROMGIT: usb: dwc3: gadget: increase tx fifo size for ss isoc endpoints
UPSTREAM: usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind()
FROMGIT: usb: gadget: uvc: remove pause flag use
...
Change-Id: Idf3eea3b21dc69c8189161c0e24744336431913a
Conflicts:
drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
drivers/spi/spi-rockchip.c
drivers/usb/gadget/function/f_uvc.c
drivers/usb/gadget/function/uvc.h
drivers/usb/gadget/function/uvc_configfs.c
drivers/usb/gadget/function/uvc_queue.c
drivers/usb/gadget/function/uvc_video.c
sound/soc/rockchip/rockchip_i2s.c
https://source.android.com/security/bulletin/2022-04-01
CVE-2021-0707
CVE-2021-39800
CVE-2021-39801 (4.9 only)
CVE-2021-39802
* tag 'ASB-2022-04-05_12-5.10': (3832 commits)
ANDROID: GKI: Update symbols to abi_gki_aarch64_oplus
ANDROID: vendor_hooks: Reduce pointless modversions CRC churn
UPSTREAM: locking/lockdep: Avoid potential access of invalid memory in lock_class
ANDROID: mm: Fix implicit declaration of function 'isolate_lru_page'
ANDROID: GKI: Update symbols to symbol list
ANDROID: GKI: Update symbols to symbol list
ANDROID: GKI: Add hook symbol to symbol list
Revert "ANDROID: dm-bow: Protect Ranges fetched and erased from the RB tree"
ANDROID: vendor_hooks: Add hooks to for free_unref_page_commit
ANDROID: vendor_hooks: Add hooks to for alloc_contig_range
ANDROID: GKI: Update symbols to symbol list
ANDROID: vendor_hooks: Add hook in shrink_node_memcgs
ANDROID: GKI: Add symbols to symbol list
FROMGIT: iommu/iova: Improve 32-bit free space estimate
ANDROID: export walk_page_range and swp_swap_info
ANDROID: vendor_hooks: export shrink_slab
ANDROID: usb: gadget: f_accessory: add compat_ioctl support
UPSTREAM: sr9700: sanity check for packet length
UPSTREAM: io_uring: return back safer resurrect
UPSTREAM: Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0"
...
Change-Id: Ic61ead530b99b10ffd535a358a48fe9bb8c33fd4
Conflicts:
drivers/android/Kconfig
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
drivers/gpu/drm/rockchip/rockchip_vop_reg.c
drivers/i2c/busses/i2c-rk3x.c
drivers/media/i2c/imx258.c
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
drivers/usb/dwc2/gadget.c
drivers/usb/gadget/function/uvc.h
lib/Kconfig.debug
Fixes: 4f64073a92 ("mfd: MAX96752F: add stream id for each link")
Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com>
Change-Id: I8a7bbce97363120fadf3bc2d4f27be7d02cc50aa
there can be multiple SerDes applications on the same I2C BUS.
the serializer can attach multiple deiserializers which have
the same I2C slave device address, to avoid I2C communication
conflicts, driver should disable remote control-channel link
after accessing.
Change-Id: I099caf597835cc34f34231231fbaddf2c5d03288
Signed-off-by: Guochun Huang <hero.huang@rock-chips.com>
The MAX96755F convert MIPI DSI 4-lane input port
data to GMSL2 high-speed serial link protocol.
They also send and receive control channel and
peripheral control data, enabling bidirectional
transmission of video and data over cables in
excess of 15 meters in length.
Signed-off-by: Guochun Huang <hero.huang@rock-chips.com>
Change-Id: I540bd4ca61ae6b6e77cb9635567690fe3367a281
The MAX96745 and MAX96747 convert DP1.4 and
eDP1.4a to single or dual GMSL2 serial. They also send
and receive control channel and peripheral control data,
enabling bidirectional transmission of video and data over
cables in excess of 15 meters in length.
Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com>
Change-Id: I59a338b0ef092bde1d1a444600acd92348cc9443
The MAX96752F/MAX96754F deserializers convert a
single- or dual-link GMSL2 serial input to single or dual
OLDI. They also send and receive side-channel and
peripheral control data, enabling full-duplex, single wire,
bidirectional transmission of video and data over 15
meter cables.
Signed-off-by: Wyon Bi <bivvy.bi@rock-chips.com>
Change-Id: Ibac9f881bd832e96a8606b9f6492e80f8d2494c6
[ Upstream commit e84ee1a75f ]
Add the missing iounmap() before return from asic3_mfd_probe
in the error handling case.
Fixes: 64e8867ba8 ("mfd: tmio_mmc hardware abstraction for CNF area")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220307072947.5369-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e477e51a41 ]
As the potential failure of the devm_request_threaded_irq(),
it should be better to check the return value of the
mc13xxx_irq_request() and return error if fails.
Fixes: 8e00593557 ("mfd: Add mc13892 support to mc13xxx")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220224022331.3208275-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
Support RK630 ethernet PHY currently, this is a RMII PHY.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Change-Id: I444f9c5abd1dc5fe8067b79ddee93a801d7a28b9
[ Upstream commit 5d051cf94f ]
Flexcom IP embeds 3 other IPs: usart, i2c, spi and selects the operation
mode (usart, i2c, spi) via mode register (FLEX_MR). On i2c bus there might
be connected critical devices (like PMIC) which on suspend/resume should
be suspended/resumed at the end/beginning. i2c uses
.suspend_noirq/.resume_noirq for this kind of purposes. Align flexcom
to use .resume_noirq as it should be resumed before the embedded IPs.
Otherwise the embedded devices might behave badly.
Fixes: 7fdec11015 ("atmel_flexcom: Support resuming after a chip reset")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211028135138.3481166-3-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c0fad75dc ]
Remove compilation flag and use __maybe_unused and pm_ptr instead.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211028135138.3481166-2-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c9e143084d upstream.
The runtime PM callback may be called as soon as the runtime PM facility
is enabled and activated. It means that ->suspend() may be called before
we finish probing the device in the ACPI case. Hence, NULL pointer
dereference:
intel-lpss INT34BA:00: IRQ index 0 not found
BUG: kernel NULL pointer dereference, address: 0000000000000030
...
Workqueue: pm pm_runtime_work
RIP: 0010:intel_lpss_suspend+0xb/0x40 [intel_lpss]
To fix this, first try to register the device and only after that enable
runtime PM facility.
Fixes: 4b45efe852 ("mfd: Add support for Intel Sunrisepoint LPSS devices")
Reported-by: Orlando Chamberlain <redecorating@protonmail.com>
Reported-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211101190008.86473-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
https://source.android.com/security/bulletin/2021-12-01
CVE-2021-33909
CVE-2021-38204
CVE-2021-0961
* tag 'ASB-2021-12-05_12-5.10': (3010 commits)
ANDROID: workqueue: export symbol of the function wq_worker_comm()
ANDROID: GKI: Update symbols to symbol list
ANDROID: vendor_hooks: Add hooks for binder proc transaction
ANDROID: GKI: Add symbols abi for USB IP kernel modules.
ANDROID: GKI: Fix file mode on mtk abi file
UPSTREAM: erofs: fix deadlock when shrink erofs slab
ANDROID: init_task: Init android vendor and oem data
UPSTREAM: sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()
ANDROID: Update symbol list for mtk
UPSTREAM: erofs: fix unsafe pagevec reuse of hooked pclusters
UPSTREAM: erofs: remove the occupied parameter from z_erofs_pagevec_enqueue()
UPSTREAM: usb: dwc3: gadget: Fix null pointer exception
ANDROID: fips140: support "evaluation testing" builds via build.sh
FROMGIT: sched/scs: Reset task stack state in bringup_cpu()
ANDROID: dma-buf: heaps: fix dma-buf heap pool pages stat
ANDROID: ABI: Add several spi_mem related symbols
UPSTREAM: spi: spi-mem: add spi_mem_dtr_supports_op()
ANDROID: gki_defconfig: enable CONFIG_SPI_MEM
ANDROID: ABI: Add several iio related symbols
ANDROID: ABI: Update symbol list for IMX
...
Change-Id: I09cddc92fa34553b944e62cc5cbbba94a84e5437
Conflicts:
arch/arm/boot/dts/rk322x.dtsi
arch/arm64/boot/dts/rockchip/rk3399.dtsi
drivers/dma-buf/heaps/system_heap.c
drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
drivers/gpu/drm/rockchip/rockchip_drm_vop.c
drivers/gpu/drm/rockchip/rockchip_lvds.c
drivers/gpu/drm/rockchip/rockchip_vop_reg.c
drivers/mtd/nand/spi/core.c
drivers/pci/controller/pcie-rockchip-host.c
drivers/soc/rockchip/Kconfig
drivers/usb/dwc3/core.c
drivers/usb/dwc3/core.h
commit 313c84b5ae upstream.
This patch extends the DLN2 driver; adding cell for adc_dln2 module.
The original patch[1] fell through the cracks when the driver was added
so ADC has never actually been usable. That patch did not have ACPI
support which was added in v5.9, so the oldest supported version this
current patch can be backported to is 5.10.
[1] https://www.spinics.net/lists/linux-iio/msg33975.html
Cc: <stable@vger.kernel.org> # 5.10+
Signed-off-by: Jack Andersen <jackoalan@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211018112541.25466-1-noralf@tronnes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 002be81140 ]
Early exits from for_each_child_of_node() should decrement the
node reference counter. Reported by Coccinelle:
drivers/mfd/mfd-core.c:197:2-24: WARNING:
Function "for_each_child_of_node" should have of_node_put() before goto around lines 209.
Fixes: c94bb233a9 ("mfd: Make MFD core code Device Tree and IRQ domain aware")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210528115126.18370-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
For PMIC that power off supplies by write register via i2c bus,
it's better to do power off at syscore shutdown.
Because when run to kernel's "pm_power_off" call, i2c may has
been stopped or PMIC may not be able to get i2c transfer while
there are too many devices are competiting.
This patch effects on PMIC: RK808/RK818/RK816, not including RK805
which power off system by pull up pmic sleep pin in ATF.
The i2c maybe stopped before pm_power_off() is called, which
results in the PMIC power off failure issue.
Moving PMIC power off operation to syscore shutdown is better.
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: Ib43827ebd49059719b8899f90a696b6c32a6ddd1
The RK806 are a Power Management IC (PMIC) for multimedia
and handheld devices. They contains the following components:
- Regulators
- Pinctrl
- PowerKey
Signed-off-by: shengfei Xu <xsf@rock-chips.com>
Change-Id: Iee9c521d52c53752286238c93b39afb5eb32e9b2
[ Upstream commit cdff1eda69 ]
One MIPS platform (mach-rc32434) defines GPIOBASE. This macro
conflicts with one of the same name in lpc_sch.c. Rename the latter one
to prevent the build error.
../drivers/mfd/lpc_sch.c:25: error: "GPIOBASE" redefined [-Werror]
25 | #define GPIOBASE 0x44
../arch/mips/include/asm/mach-rc32434/rb.h:32: note: this is the location of the previous definition
32 | #define GPIOBASE 0x050000
Cc: Denis Turischev <denis@compulab.co.il>
Fixes: e82c60ae7d ("mfd: Introduce lpc_sch for Intel SCH LPC bridge")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 922e8ce883 ]
The IRQ support for SCH GPIO is not specific to the Intel Quark SoC.
Moreover the IRQ routing is quite interesting there, so while it's
needs a special support, the driver haven't it anyway yet.
Due to above remove basically redundant code of IRQ support.
This reverts commit ec689a8a81.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a946506c48 ]
The driver was registering IRQ 0 when no IRQ was set. This leads to
warnings with newer kernels.
Clear the resource flags, so no resource is registered at all in this
case.
Fixes: 2f17dd34ff ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f949a9ebce ]
On Cherry Trail devices with an AXP288 PMIC the external SD-card slot
used the AXP's DLDO2 as card-voltage and either DLDO3 or GPIO1LDO
(GPIO1 pin in low noise LDO mode) as signal-voltage.
These regulators are turned on/off and in case of the signal-voltage
also have their output-voltage changed by the _PS0 and _PS3 power-
management ACPI methods on the MMC-controllers ACPI fwnode as well as
by the _DSM ACPI method for changing the signal voltage.
The AML code implementing these methods is directly accessing the
PMIC through ACPI I2C OpRegion accesses, instead of using the special
PMIC OpRegion handled by drivers/acpi/pmic/intel_pmic_xpower.c .
This means that the contents of the involved PMIC registers can change
without the change being made through the regmap interface, so regmap
should not cache the contents of these registers.
Mark the regulator power on/off, the regulator voltage control and the
GPIO1 control registers as volatile, to avoid regmap caching them.
Specifically this fixes an issue on some models where the i915 driver
toggles another LDO using the same on/off register on/off through
MIPI sequences (through intel_soc_pmic_exec_mipi_pmic_seq_element())
which then writes back a cached on/off register-value where the
card-voltage is off causing the external sdcard slot to stop working
when the screen goes blank, or comes back on again.
The regulator register-range now marked volatile also includes the
buck regulator control registers. This is done on purpose these are
normally not touched by the AML code, but they are updated directly
by the SoC's PUNIT which means that they may also change without going
through regmap.
Note the AXP288 PMIC is only used on Bay- and Cherry-Trail platforms,
so even though this is an ACPI specific problem there is no need to
make the new volatile ranges conditional since these platforms always
use ACPI.
Fixes: dc91c3b6fe ("mfd: axp20x: Mark AXP20X_VBUS_IPSOUT_MGMT as volatile")
Fixes: cd53216625 ("mfd: axp20x: Fix axp288 volatile ranges")
Reported-and-tested-by: Clamshell <clamfly@163.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ff80e2de3 ]
Although irq_create_mapping() is able to deal with duplicate
mappings, it really isn't supposed to be a substitute for
irq_find_mapping(), and can result in allocations that take place
in atomic context if the mapping didn't exist.
Fix the handful of MFD drivers that use irq_create_mapping() in
interrupt context by using irq_find_mapping() instead.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec343111c0 ]
These are the actual frequencies reported by the PLL, so let's
report these. The roundoffs are inappropriate, we should round
to the frequency that the clock will later report.
Drop some whitespace at the same time.
Cc: phone-devel@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit a3cab91402.
The mfd fusb302 driver previously used for Type-C port
of rockchip platforms, but it's not compatible with the
new Type-C framework, and there's a new fusb302 driver
in the driver usb typec framework, so remove this driver.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Change-Id: I1665d765bbd928541e7528ed6de86c378a02f16b
* android12-5.10-2021-08: (429 commits)
ANDROID: Update symbol list for mtk
ANDROID: scheduler: export task_sched_runtime
FROMLIST: mm: slub: fix slub_debug disabling for list of slabs
FROMLIST: mm/madvise: add MADV_WILLNEED to process_madvise()
ANDROID: Update the exynos symbol list
FROMGIT: firmware: arm_scmi: Free mailbox channels if probe fails
ANDROID: GKI: gki_defconfig: Enable CONFIG_NFC
ANDROID: sched: Make uclamp changes depend on CAP_SYS_NICE
ANDROID: GKI: update xiaomi symbol list and ABI XML
ANDROID: ABI: update generic symbol list
ANDROID: scsi: ufs: Enable CONFIG_SCSI_UFS_HPB
ANDROID: scsi: ufs: Make CONFIG_SCSI_UFS_HPB compatible with the GKI
UPSTREAM: arm64: vdso: Avoid ISB after reading from cntvct_el0
ANDROID: GKI: Disable X86_MCE drivers
ANDROID: GKI: Update symbols to symbol list
ANDROID: ABI: update allowed list for exynos
FROMGIT: sched: Skip priority checks with SCHED_FLAG_KEEP_PARAMS
FROMGIT: sched: Don't report SCHED_FLAG_SUGOV in sched_getattr()
FROMGIT: sched/deadline: Fix reset_on_fork reporting of DL tasks
BACKPORT: FROMGIT: sched: Fix UCLAMP_FLAG_IDLE setting
...
Change-Id: I5e0600bb4ccd0333366b016b42332e1e79e56b61
Conflicts:
drivers/usb/gadget/configfs.c
include/linux/usb/gadget.h
RK1000's control register block need mclk for i2c communication.
So mclk should be enabled in advance.
RK1000's control register block should be registered before RK1000
TVE.
Change-Id: Iba9a2a410fe927666072f8d246995462a860ec3a
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
The commit 529a1101212a("mfd: syscon: Don't free allocated name
for regmap_config") doesn't free the allocated name field of struct
regmap_config, but introduce a memory leak. There is another
commit 94cc89eb8fa5("regmap: debugfs: Fix handling of name string
for debugfs init delays") fixing this debugfs init issue from root
cause. With this fixing, the name field in struct regmap_debugfs_node
is removed. When initialize debugfs for syscon driver, the name
field of struct regmap_config is not used anymore. So, the allocated
name field of struct regmap_config is need to be freed directly after
regmap initialization to avoid memory leak.
Cc: stable@vger.kernel.org
Fixes: 529a1101212a("mfd: syscon: Don't free allocated name for regmap_config")
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/patchwork/patch/1408873/
Bug: 193747648
Signed-off-by: Allen Chiu <allen.chiu@mediatek.com>
Change-Id: Iadc628aae889f306afb6eefbf66fdd9143a91278
(cherry picked from commit 56a1188159)
[ Upstream commit 0b7cbe811c ]
We have started to get a bunch of pointless dmamask not set warnings
that makes the output of dmesg -l err,warn hard to read with many
extra warnings:
cpcap-regulator cpcap-regulator.0: DMA mask not set
cpcap_adc cpcap_adc.0: DMA mask not set
cpcap_battery cpcap_battery.0: DMA mask not set
cpcap-charger cpcap-charger.0: DMA mask not set
cpcap-pwrbutton cpcap-pwrbutton.0: DMA mask not set
cpcap-led cpcap-led.0: DMA mask not set
cpcap-led cpcap-led.1: DMA mask not set
cpcap-led cpcap-led.2: DMA mask not set
cpcap-led cpcap-led.3: DMA mask not set
cpcap-led cpcap-led.4: DMA mask not set
cpcap-rtc cpcap-rtc.0: DMA mask not set
cpcap-usb-phy cpcap-usb-phy.0: DMA mask not set
This seems to have started with commit 4d8bde883b ("OF: Don't set
default coherent DMA mask"). We have the parent SPI controller use
DMA, while CPCAP driver and it's children do not. For audio, the
DMA is handled over I2S bus with the McBSP driver.
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Cc: Ivan Jelincic <parazyd@dyne.org>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4700ef3265 ]
This patch adds/modifies MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
