Keeps this selection with the rest of the DRM HELPER
selection.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since, hot plugging eDP displays isn't supported, it is sufficient for
us to warn about the lack of a connected display once. So, use ASSERT()
in dce110_edp_wait_for_hpd_ready() instead of DC_LOG_WARNING().
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
re-enable ac/dc on smu_v13_0_0/10
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this patch to add tmz support for GC 10.3.6
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For the MQD memory, KMD would always allocate 4K memory,
and mes scheduler would write to the end of MQD for unmap flag.
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Fix ftrace2bconf.sh tool for checking event enable status correctly.
- Add CONFIG_BOOT_CONFIG_FORCE to apply bootconfig without 'bootconfig'
boot parameter.
- Enable CONFIG_BOOT_CONFIG_FORCE by default if a bootconfig is embedded
in the kernel.
- Increase max number of nodes of bootconfig to 8192.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmP1VUUACgkQ2/sHvwUr
PxuExQgAslUeGrdn8nAA2qsModVHrXwLl1Xa6797Xzh/xCoIOAQ5AaUkGOlBBpCi
0UGsiqo5pLfrJ7q1HCTiD4kNpDcK6Kw9UbjClMS2nSf58hK98upUAng+4VlTH3dZ
difzua1Y0PohBDsLZpV5Ex/K9ZHiPhm44pqkaA+q0gHBfa5AmFuRUD3icEdiHmFu
B3GX0qdIMeFmUhxt0jmfvsu1Xq8fjF3Lsz/xCeOHcNJYyxzmdttxHYY8pLTWOIoL
xGL2MmwIYzLRW3/r9E71JNCLgykUWZSBbYhcJ7lIAJadFNbNBFJ0+v5uiyxbZEib
Xv5UAyTKSIeZIyH0fUZ/4Ufa8sw5Nw==
=0Nnb
-----END PGP SIGNATURE-----
Merge tag 'bootconfig-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig updates from Masami Hiramatsu:
- Fix ftrace2bconf.sh tool for checking event enable status correctly
- Add CONFIG_BOOT_CONFIG_FORCE to apply bootconfig without 'bootconfig'
boot parameter
- Enable CONFIG_BOOT_CONFIG_FORCE by default if a bootconfig is
embedded in the kernel
- Increase max number of nodes of bootconfig to 8192
* tag 'bootconfig-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC support
bootconfig: Default BOOT_CONFIG_FORCE to y if BOOT_CONFIG_EMBED
Allow forcing unconditional bootconfig processing
tools/bootconfig: fix single & used for logical condition
Just one fix which just came in, this just hit linux-next just yesterday
with a success build report. But since its a fix and reviewed I think its
good to take in.
Sadly the eager beavers willing to help with the sysctl moves have slowed.
-----BEGIN PGP SIGNATURE-----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=Txc3
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl update from Luis Chamberlain:
"Just one fix which just came in.
Sadly the eager beavers willing to help with the sysctl moves have
slowed"
* tag 'sysctl-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: fix proc_dobool() usability
Nothing exciting at all for modules for v6.3. The biggest change is
just the change of INSTALL_MOD_DIR from "extra" to "updates" which
I found lingered for ages for no good reason while testing the CXL
mock driver [0]. The CXL mock driver has no kconfig integration and requires
building an external module... and re-building the *rest* of the production
drivers. This mock driver when loaded but not the production ones will
crash. All this crap can obviously be fixed by integrating kconfig
semantics into such test module, however that's not desirable by
the maintainer, and so sensible defaults must be used to ensure a
default "make modules_install" will suffice for most distros which
do not have a file like /etc/depmod.d/dist.conf with something like
`search updates extra built-in`. Since most distros rely on kmod and
since its inception the "updates" directory is always in the search
path it makes more sense to use that than the "extra" which only
*some* RH based systems rely on. All this stuff has been on linux-next
for a while.
For v6.4 I already have queued some initial work by Song Liu which gets
us slowly going to a place where we *may* see a generic allocator for
huge pages for module text to avoid direct map fragmentation *and*
reduce iTLB pressure. That work is in its initial stages, no allocator
work is done yet. This is all just prep work. Fortunately Thomas Gleixner
has helped convince Song that modules *need* to be *requirement* if we
are going to see any special allocator touch x86. So who knows... maybe
around v6.5 we'll start seeing some *real* performance numbers of the
effect of using huge pages for something other than eBPF toys.
For v6.4 also, you may start seeing patches from Nick Alcock on different
trees and modules-next which aims at extending kallsyms *eventually* to provide
clearer address to symbol lookups. The claim is that this is a *great* *feature*
tracing tools are dying to have so they can for instance disambiguate symbols as
coming from modules or from other parts of the kernel. I'm still waiting to see
proper too usage of such stuff, but *how* we lay this out is still being ironed
out. Part of the initial work I've been pushing for is to help upkeep our
modules build optimizations, so being mindful about the work by Masahiro Yamada
on commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf") which helps avoid traversing the build
tree twice. After this commit we now rely on the MODULE_LICENSE() tag to
determine in a *faster* way if something being built could be a module and
we dump this into the modules.builtin so that modprobe can simply succeed
if a module is known to already be built-in. The cleanup work on MODULE_LICENSE()
simply stems to assist false positives from userspace for things as built-in
when they *cannot ever* be modules as we don't even tristate the code as
modular. This work also helps with the SPDX effort as some code is not clearly
identified with a tag. In the *future*, once all *possible* modules are
confirmed to have a respective SPDX tag, we *may* just be able to replace the
MODULE_LICENSE() to instead be generated automatically through inference of
the respective module SPDX tags.
[0] https://lkml.kernel.org/r/20221209062919.1096779-1-mcgrof@kernel.org
-----BEGIN PGP SIGNATURE-----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=aeTV
-----END PGP SIGNATURE-----
Merge tag 'modules-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"Nothing exciting at all for modules for v6.3.
The biggest change is just the change of INSTALL_MOD_DIR from "extra"
to "updates" which I found lingered for ages for no good reason while
testing the CXL mock driver [0].
The CXL mock driver has no kconfig integration and requires building
an external module... and re-building the *rest* of the production
drivers. This mock driver when loaded but not the production ones will
crash.
All this can obviously be fixed by integrating kconfig semantics into
such test module, however that's not desirable by the maintainer, and
so sensible defaults must be used to ensure a default "make
modules_install" will suffice for most distros which do not have a
file like /etc/depmod.d/dist.conf with something like `search updates
extra built-in`.
Since most distros rely on kmod and since its inception the "updates"
directory is always in the search path it makes more sense to use that
than the "extra" which only *some* RH based systems rely on.
All this stuff has been on linux-next for a while"
[0] https://lkml.kernel.org/r/20221209062919.1096779-1-mcgrof@kernel.org
* tag 'modules-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
Documentation: livepatch: module-elf-format: Remove local klp_modinfo definition
module.h: Document klp_modinfo struct using kdoc
module: Use kstrtobool() instead of strtobool()
kernel/params.c: Use kstrtobool() instead of strtobool()
test_kmod: stop kernel-doc warnings
kbuild: Modify default INSTALL_MOD_DIR from extra to updates
-----BEGIN PGP SIGNATURE-----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=xdQJ
-----END PGP SIGNATURE-----
Merge tag 'livepatching-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Allow reloading a livepatched module by clearing livepatch-specific
relocations in the livepatch module.
Otherwise, the repeated load would fail on consistency checks.
* tag 'livepatching-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch,x86: Clear relocation targets on a module removal
x86/module: remove unused code in __apply_relocate_add
-----BEGIN PGP SIGNATURE-----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=cVoE
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Refactor printk code for formatting messages that are shown on
consoles. This is a preparatory step for introducing atomic consoles
which could not share the global buffers
- Prevent memory leak when removing printk index in debugfs
- Dump also the newest printk message by the sample gdbmacro
- Fix a compiler warning
* tag 'printk-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printf: fix errname.c list
kernel/printk/index.c: fix memory leak with using debugfs_lookup()
printk: Use scnprintf() to print the message about the dropped messages on a console
printk: adjust string limit macros
printk: use printk_buffers for devkmsg
printk: introduce console_prepend_dropped() for dropped messages
printk: introduce printk_get_next_message() and printk_message
printk: introduce struct printk_buffers
console: Document struct console
console: Use BIT() macros for @flags values
printk: move size limit macros into internal.h
docs: gdbmacros: print newest record
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEjUuTAak14xi+SF7M4CHKc/GJqRAFAmP003YACgkQ4CHKc/GJ
qRA2Pgf/XzaHWvxPiIZA8BO8rCi6VM3ogoJ70EsMcHyPreh5bqN0wwrpQLNe6ZXT
cZq1vQOhODNr0133YgiO3oZGH5rd/UXbXCR+mHAsqTKBZuAHtJ/+qtWlcEm9paag
4OrfKl8NvV+3qY1f2UnZ8Jdc+xMxGYTetq4ddu94Xf1c8u4IoaktIBkBrQs2j5Uc
0Eq7iv3dSgjSVleF9AmodQbYguwPiPYq+LWX4lBXwn1sgxxN0jfIKitpzZV0ISi3
gD3HHqh52QtXDBZbL/UZh6naL5Vtfir68UXDfpjRK3BklL1Bwd/l9ww/W4Q1Any8
hB06GMXFbPY86ZD7ZxBHQyUpWcnzGw==
=dUd6
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
"This time it's just a bunch of smaller cleanups and fixes for SLAB and
SLUB:
- Make it possible to use kmem_cache_alloc_bulk() early in boot when
interrupts are not yet enabled, as code doing that started to
appear via new maple tree users (Thomas Gleixner)
- Fix debugfs-related memory leak in SLUB (Greg Kroah-Hartman)
- Use the standard idiom to get head page of folio (SeongJae Park)
- Simplify and inline is_debug_pagealloc_cache() in SLAB (lvqian)
- Remove unused variable in SLAB (Gou Hao)"
* tag 'slab-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm, slab/slub: Ensure kmem_cache_alloc_bulk() is available early
mm/slub: fix memory leak with using debugfs_lookup()
mm/slab.c: cleanup is_debug_pagealloc_cache()
mm/sl{a,u}b: fix wrong usages of folio_page() for getting head pages
mm/slab: remove unused slab_early_init
- Skip negative return code check for snprintf in eprobe.
- Add recursive call test cases for kprobe unit test
- Add 'char' type to probe events to show it as the character instead of value.
- Update kselftest kprobe-event testcase to ignore '__pfx_' symbols.
- Fix kselftest to check filter on eprobe event correctly.
- Add filter on eprobe to the README file in tracefs.
- Fix optprobes to check whether there is 'under unoptimizing' optprobe when optimizing another kprobe correctly.
- Fix optprobe to check whether there is 'under unoptimizing' optprobe when fetching the original instruction correctly.
- Fix optprobe to free 'forcibly unoptimized' optprobe correctly.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmP0JdYACgkQ2/sHvwUr
Pxt6sQf/TD9Kwqx3XG1tnLPev6yt2nuggUippHwWUFHlJtMyUaLV8aKFqByyEe+j
tCQvrFIIJq242xg0Jac/MAf2exlWG9jsmVZPmvC1YzepOAbjXu2eBkIS7LsbeHjF
JJypNnEceffWCpNoD6nlvR0xWXenqRbZJwdsGqo3u+fXnzTurEMY2GU2xOyv39tv
S1uNLPANJxdMb/2iUsUE3hMbe82dqr8zPcApqWFtTBB6QPHI3B2SjuQHpQxwbTPl
bzAl0yQkLSQXprVzT7xJ4xLnzbl1ljgJBci5aX8BFF+VD9oYkypdfYVczBH5VsP9
E3eT9T9lRf4Q99EqxNy5uw7NqQXGQg==
=CMPb
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull kprobes updates from Masami Hiramatsu:
- Skip negative return code check for snprintf in eprobe
- Add recursive call test cases for kprobe unit test
- Add 'char' type to probe events to show it as the character instead
of value
- Update kselftest kprobe-event testcase to ignore '__pfx_' symbols
- Fix kselftest to check filter on eprobe event correctly
- Add filter on eprobe to the README file in tracefs
- Fix optprobes to check whether there is 'under unoptimizing' optprobe
when optimizing another kprobe correctly
- Fix optprobe to check whether there is 'under unoptimizing' optprobe
when fetching the original instruction correctly
- Fix optprobe to free 'forcibly unoptimized' optprobe correctly
* tag 'probes-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/eprobe: no need to check for negative ret value for snprintf
test_kprobes: Add recursed kprobe test case
tracing/probe: add a char type to show the character value of traced arguments
selftests/ftrace: Fix probepoint testcase to ignore __pfx_* symbols
selftests/ftrace: Fix eprobe syntax test case to check filter support
tracing/eprobe: Fix to add filter on eprobe description in README file
x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe range
x86/kprobes: Fix __recover_optprobed_insn check optimizing logic
kprobes: Fix to handle forcibly unoptimized kprobes on freeing_list
With this refcnt added in sctp_stream_priorities, we don't need to
traverse all streams to check if the prio is used by other streams
when freeing one stream's prio in sctp_sched_prio_free_sid(). This
can avoid a nested loop (up to 65535 * 65535), which may cause a
stuck as Ying reported:
watchdog: BUG: soft lockup - CPU#23 stuck for 26s! [ksoftirqd/23:136]
Call Trace:
<TASK>
sctp_sched_prio_free_sid+0xab/0x100 [sctp]
sctp_stream_free_ext+0x64/0xa0 [sctp]
sctp_stream_free+0x31/0x50 [sctp]
sctp_association_free+0xa5/0x200 [sctp]
Note that it doesn't need to use refcount_t type for this counter,
as its accessing is always protected under the sock lock.
v1->v2:
- add a check in sctp_sched_prio_set to avoid the possible prio_head
refcnt overflow.
Fixes: 9ed7bfc795 ("sctp: fix memory leak in sctp_stream_outq_migrate()")
Reported-by: Ying Xu <yinxu@redhat.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/825eb0c905cb864991eba335f4a2b780e543f06b.1677085641.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Document the compatible for the QDU1000 mailbox.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
IPQ5332 has the APSS clock controller utilizing the same register space
as the APCS, so provide access to the APSS utilizing a child device like
other IPQ chipsets.
Like IPQ6018, the same controller and driver is used, so utilize IPQ6018
match data for IPQ5332.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add the mailbox compatible for the IPQ5332 SoC.
Since the IPQ5332 mailbox is compatible with the IPQ6018, lets create the
fallback to ipq6018 compatible, so that we don't bloat the of_device_id
table in the driver.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Convert Qualcomm G-Link RPM edge binding to DT schema. Move it to
remoteproc as it better suits the purpose - communication channel with
remote processor.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
MSM8996 also has the clock-related part of the APCS mailbox device.
Follow the usual pattern and create a child device to handle these
clocks.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add the #clock-cells property to the MSM8996 example, as the APCS block
is going to provide the `sys_apcs_aux' clock to the consumers.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add missing platforms to the conditional clauses selecting whether the
clocks/clock-names properties are required or whether they must be
omitted.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The schema incorrectly lists some of the platforms in the statement
requiring clocks/clock-names. Correct this by moving platforms not
requiring additional clocks to the separate clause.
Fixes: 0d17014e91 ("dt-bindings: mailbox: Add binding for SDX55 APCS")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
On msm8976 platform APCS also uses syscon compatible, so move it to the
block of compatibles using SoC-compat together with syscon.
Fixes: 6054546618 ("dt-bindings: mailbox: qcom,apcs-kpss-global: Add syscon const for relevant entries")
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The commit 0d17014e91 ("dt-bindings: mailbox: Add binding for SDX55
APCS") added SDX55 compatible string to one of clock-selection
conditions, but failed to add one to the main schema's compatible list.
Fix this omission.
Fixes: 0d17014e91 ("dt-bindings: mailbox: Add binding for SDX55 APCS")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add a compatible for the ipcc on sa8775p platforms.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Using flexible array is more straight forward. It
- saves 1 pointer in the 'zynqmp_ipi_pdata' structure
- saves an indirection when using this array
- saves some LoC and avoids some always spurious pointer arithmetic
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Encourage developers to place Link: tag pointing to the report when they
are using Reported-by: tags. Those links are often extremely useful for
any code archaeologist that wants to know more about the backstory of a
change than the commit message provides. That includes maintainers
higher up in the patch-flow hierarchy, which is why Linus asks
developers to add such links [1, 2, 3]. To quote [1]:
> Again, the commit has a link to the patch *submission*, which is
> almost entirely useless. There's no link to the actual problem the
> patch fixes.
>
> [...]
>
> Put another way: I can see that
>
> Reported-by: Zhangfei Gao <zhangfei.gao@foxmail.com>
>
> in the commit, but I don't have a clue what the actual report was, and
> there really isn't enough information in the commit itself, except for
> a fairly handwavy "Device drivers might, for instance, still need to
> flush operations.."
>
> I don't want to know what device drivers _might_ do. I would want to
> have an actual pointer to what they do and where.
Another reason why these links are wanted: the ongoing regression
tracking efforts can only scale with them, as they allow the regression
tracking bot 'regzbot' to automatically connect tracked reports with
patches that are posted or committed to fix tracked regressions.
Link: https://lore.kernel.org/all/CAHk-=wjMmSZzMJ3Xnskdg4+GGz=5p5p+GSYyFBTh0f-DgvdBWg@mail.gmail.com/ [1]
Link: https://lore.kernel.org/all/CAHk-=wgs38ZrfPvy=nOwVkVzjpM3VFU1zobP37Fwd_h9iAD5JQ@mail.gmail.com/ [2]
Link: https://lore.kernel.org/all/CAHk-=wjxzafG-=J8oT30s7upn4RhBs6TX-uVFZ5rME+L5_DoJA@mail.gmail.com/ [3]
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://lore.kernel.org/r/9a07ec640d809723492f8ade4f54705914e80419.1676369564.git.linux@leemhuis.info
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Convert the Documentation front page to use the heading adornments
that are documented in doc-guide/sphinx.rst for document title and
chapters. I.e., convert most section headings to chapters.
This leaves "Indices and tables" as a chapter entry at the same level
as the other chapters.
The only visual difference from before to after is that the "Indices
and tables" heading is smaller and has more vertical whitespace
preceding it (although that may depend on the web browser being used).
Fixes: 0c7b4366f1 ("docs: Rewrite the front page")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/20230215005726.27320-1-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The config is actually called CONFIG_RT_MUTEXES, not CONFIG_RT_MUTEX.
The config CONFIG_LOCK_TORTURE_TEST should be connected by underscore, for
the sake of consistent referencing to configs in the kernel documentation.
Address those issues.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20230220165749.12850-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add Meteor Lake SoC to the list of processor models for which
Power Limit4 is supported by the Intel RAPL driver.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in amd-pstate.c which cannot be built as a module.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
[ rjw: Subject and changelog adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definition to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 202e683df3 ("cpufreq: amd-pstate: add amd-pstate driver
parameter for mode selection") changed the driver to be disabled by
default, and this can surprise users.
Let users know what happened so they can decide what to do next.
Link: https://bugs.launchpad.net/bugs/2006942
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Yuan Perry <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
While the majority of server OS distributions are deployed with the
"performance" governor as the default, some distributions like Ubuntu use
the "powersave" governor by default.
While using the "powersave" governor in its default configuration on
Sapphire Rapids systems leads to much lower power, the performance is
lower by more than 25% for several workloads relative to the
"performance" governor.
A 37% difference has been reported by www.Phoronix.com [1].
This is a consequence of using a relatively high EPP value in the
default configuration of the "powersave" governor and the performance
can be made much closer to the "performance" governor's level by
adjusting the default EPP value. Based on experiments, with EPP of 0x00,
0x10, 0x20, the performance delta between the "powersave" governor and
the "performance" one is around 12%. However, the EPP of 0x20 reduces
average power by 18% with respect to the lower EPP values.
[Note that raising min_perf_pct in sysfs as high as 50% in addition to
adjusting EPP does not improve the performance any further.]
For this reason, change the EPP value corresponding to the the default
balance_performance setting for Sapphire Rapids to 0x20, which is
straightforward, because analogous default EPP adjustment has been
applied to Alder Lake and there is a way to set the balance_performance
EPP value in intel_pstate based on the processor model already.
The goal here is to limit the mean performance delta between the
"powersave" governor in the default configuration and the "performance"
governor for a wide variety of server workloadsto to around 10-12%. For
some bursty workloads, this delta can be still large, as the frequency
ramp-up will still lag when the "powersave" governor is in use
irrespective of the EPP setting, because the performance governor always
requests the maximum possible frequency.
Link: https://www.phoronix.com/review/centos-clear-spr/6 # [1]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- 'perf lock contention' improvements:
- Add -o/--lock-owner option:
$ sudo ./perf lock contention -abo -- ./perf bench sched pipe
# Running 'sched/pipe' benchmark:
# Executed 1000000 pipe operations between two processes
Total time: 4.766 [sec]
4.766540 usecs/op
209795 ops/sec
contended total wait max wait avg wait pid owner
403 565.32 us 26.81 us 1.40 us -1 Unknown
4 27.99 us 8.57 us 7.00 us 1583145 sched-pipe
1 8.25 us 8.25 us 8.25 us 1583144 sched-pipe
1 2.03 us 2.03 us 2.03 us 5068 chrome
The owner is unknown in most cases. Filtering only for the mutex locks, it
will more likely get the owners.
- -S/--callstack-filter is to limit display entries having the given
string in the callstack
$ sudo ./perf lock contention -abv -S net sleep 1
...
contended total wait max wait avg wait type caller
5 70.20 us 16.13 us 14.04 us spinlock __dev_queue_xmit+0xb6d
0xffffffffa5dd1c60 _raw_spin_lock+0x30
0xffffffffa5b8f6ed __dev_queue_xmit+0xb6d
0xffffffffa5cd8267 ip6_finish_output2+0x2c7
0xffffffffa5cdac14 ip6_finish_output+0x1d4
0xffffffffa5cdb477 ip6_xmit+0x457
0xffffffffa5d1fd17 inet6_csk_xmit+0xd7
0xffffffffa5c5f4aa __tcp_transmit_skb+0x54a
0xffffffffa5c6467d tcp_keepalive_timer+0x2fd
Please note that to have the -b option (BPF) working above one has to build
with BUILD_BPF_SKEL=1.
- Add more 'perf test' entries to test these new features.
- Add Ian Rogers to MAINTAINERS as a perf tools reviewer.
- Add support for retire latency feature (pipeline stall of a instruction
compared to the previous one, in cycles) present on some Intel processors.
- Add 'perf c2c' report option to show false sharing with adjacent cachelines, to
be used in machines with cacheline prefetching, where accesses to a cacheline
brings the next one too.
- Skip 'perf test bpf' when the required kernel-debuginfo package isn't installed.
perf script:
- Add 'cgroup' field for 'perf script' output:
$ perf record --all-cgroups -- true
$ perf script -F comm,pid,cgroup
true 337112 /user.slice/user-657345.slice/user@657345.service/...
true 337112 /user.slice/user-657345.slice/user@657345.service/...
true 337112 /user.slice/user-657345.slice/user@657345.service/...
true 337112 /user.slice/user-657345.slice/user@657345.service/...
- Add support for showing branch speculation information in 'perf
script' and in the 'perf report' raw dump (-D).
perf record:
- Fix 'perf record' segfault with --overwrite and --max-size.
Intel PT:
- Add support for synthesizing "cycle" events from Intel PT traces as we
support "instruction" events when Intel PT CYC packets are available. This
enables much more accurate profiles than when using the regular 'perf record -e
cycles' (the default) when the workload lasts for very short periods (<10ms).
- .plt symbol handling improvements, better handling IBT (in the past
MPX) done in the context of decoding Intel PT processor traces, IFUNC
symbols on x86_64, static executables, understanding .plt.got symbols on
x86_64.
- Add a 'perf test' to test symbol resolution, part of the .plt
improvements series, this tests things like symbol size in contexts
where only the symbol start is available (kallsyms), etc.
- Better handle auxtrace/Intel PT data when using pipe mode (perf record sleep 1|perf report).
- Fix symbol lookup with kcore with multiple segments match stext,
getting the symbol resolution to just show DSOs as unknown.
ARM:
- Timestamp improvements for ARM64 systems with ETMv4 (Embedded Trace
Macrocell v4).
- Ensure ARM64 CoreSight timestamps don't go backwards.
- Document that ARM64 SPE (Statistical Profiling Extension) is used with 'perf c2c/mem'.
- Add raw decoding for ARM64 SPEv1.2 previous branch address.
- Update neoverse-n2-v2 ARM vendor events (JSON tables): topdown L1, TLB,
cache, branch, PE utilization and instruction mix metrics.
- Update decoder code for OpenCSD version 1.4, on ARM64 systems.
- Fix command line auto-complete of CPU events on aarch64.
perf test/bench:
- Switch basic BPF filtering test to use syscall tracepoint to avoid the
variable number of probes inserted when using the previous probe point
(do_epoll_wait) that happens on different CPU architectures.
- Fix DWARF unwind test by adding non-inline to expected function in a
backtrace.
- Use 'grep -c' where the longer form 'grep | wc -l' was being used.
- Add getpid and execve benchmarks to 'perf bench syscall'.
Miscellaneous:
- Avoid d3-flame-graph package dependency in 'perf script flamegraph',
making this feature more generally available.
- Add JSON metric events to present CPI stall cycles in Power10.
- Assorted improvements/refactorings on the JSON metrics parsing code.
Build:
- Fix 'perf probe' and 'perf test' when libtraceevent isn't linked, as
several tests use tracepoints, those should be skipped.
- More fallout fixes for the removal of tools/lib/traceevent/.
- Fix build error when linking with libpfm.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCY/YzGgAKCRCyPKLppCJ+
J98CAP4/GD3E86Dk+S+w5FmPEHuBKootuZ3pHOqCnXLiyKFZqgEAs9TWOg9KVKGh
io9cLluMjzfRwQrND8cpn3VfXxWvVAQ=
=L1qh
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.3-1-2023-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools updates from Arnaldo Carvalho de Melo:
"Miscellaneous:
- Add Ian Rogers to MAINTAINERS as a perf tools reviewer.
- Add support for retire latency feature (pipeline stall of a
instruction compared to the previous one, in cycles) present on
some Intel processors.
- Add 'perf c2c' report option to show false sharing with adjacent
cachelines, to be used in machines with cacheline prefetching,
where accesses to a cacheline brings the next one too.
- Skip 'perf test bpf' when the required kernel-debuginfo package
isn't installed.
- Avoid d3-flame-graph package dependency in 'perf script flamegraph',
making this feature more generally available.
- Add JSON metric events to present CPI stall cycles in Power10.
- Assorted improvements/refactorings on the JSON metrics parsing
code.
perf lock contention:
- Add -o/--lock-owner option:
$ sudo ./perf lock contention -abo -- ./perf bench sched pipe
# Running 'sched/pipe' benchmark:
# Executed 1000000 pipe operations between two processes
Total time: 4.766 [sec]
4.766540 usecs/op
209795 ops/sec
contended total wait max wait avg wait pid owner
403 565.32 us 26.81 us 1.40 us -1 Unknown
4 27.99 us 8.57 us 7.00 us 1583145 sched-pipe
1 8.25 us 8.25 us 8.25 us 1583144 sched-pipe
1 2.03 us 2.03 us 2.03 us 5068 chrome
The owner is unknown in most cases. Filtering only for the
mutex locks, it will more likely get the owners.
- -S/--callstack-filter is to limit display entries having the given
string in the callstack:
$ sudo ./perf lock contention -abv -S net sleep 1
...
contended total wait max wait avg wait type caller
5 70.20 us 16.13 us 14.04 us spinlock __dev_queue_xmit+0xb6d
0xffffffffa5dd1c60 _raw_spin_lock+0x30
0xffffffffa5b8f6ed __dev_queue_xmit+0xb6d
0xffffffffa5cd8267 ip6_finish_output2+0x2c7
0xffffffffa5cdac14 ip6_finish_output+0x1d4
0xffffffffa5cdb477 ip6_xmit+0x457
0xffffffffa5d1fd17 inet6_csk_xmit+0xd7
0xffffffffa5c5f4aa __tcp_transmit_skb+0x54a
0xffffffffa5c6467d tcp_keepalive_timer+0x2fd
Please note that to have the -b option (BPF) working above one has
to build with BUILD_BPF_SKEL=1.
- Add more 'perf test' entries to test these new features.
perf script:
- Add 'cgroup' field for 'perf script' output:
$ perf record --all-cgroups -- true
$ perf script -F comm,pid,cgroup
true 337112 /user.slice/user-657345.slice/user@657345.service/...
true 337112 /user.slice/user-657345.slice/user@657345.service/...
true 337112 /user.slice/user-657345.slice/user@657345.service/...
true 337112 /user.slice/user-657345.slice/user@657345.service/...
- Add support for showing branch speculation information in 'perf
script' and in the 'perf report' raw dump (-D).
perf record:
- Fix 'perf record' segfault with --overwrite and --max-size.
perf test/bench:
- Switch basic BPF filtering test to use syscall tracepoint to avoid
the variable number of probes inserted when using the previous
probe point (do_epoll_wait) that happens on different CPU
architectures.
- Fix DWARF unwind test by adding non-inline to expected function in
a backtrace.
- Use 'grep -c' where the longer form 'grep | wc -l' was being used.
- Add getpid and execve benchmarks to 'perf bench syscall'.
Intel PT:
- Add support for synthesizing "cycle" events from Intel PT traces as
we support "instruction" events when Intel PT CYC packets are
available. This enables much more accurate profiles than when using
the regular 'perf record -e cycles' (the default) when the workload
lasts for very short periods (<10ms).
- .plt symbol handling improvements, better handling IBT (in the past
MPX) done in the context of decoding Intel PT processor traces,
IFUNC symbols on x86_64, static executables, understanding .plt.got
symbols on x86_64.
- Add a 'perf test' to test symbol resolution, part of the .plt
improvements series, this tests things like symbol size in contexts
where only the symbol start is available (kallsyms), etc.
- Better handle auxtrace/Intel PT data when using pipe mode (perf
record sleep 1|perf report).
- Fix symbol lookup with kcore with multiple segments match stext,
getting the symbol resolution to just show DSOs as unknown.
ARM:
- Timestamp improvements for ARM64 systems with ETMv4 (Embedded Trace
Macrocell v4).
- Ensure ARM64 CoreSight timestamps don't go backwards.
- Document that ARM64 SPE (Statistical Profiling Extension) is used
with 'perf c2c/mem'.
- Add raw decoding for ARM64 SPEv1.2 previous branch address.
- Update neoverse-n2-v2 ARM vendor events (JSON tables): topdown L1,
TLB, cache, branch, PE utilization and instruction mix metrics.
- Update decoder code for OpenCSD version 1.4, on ARM64 systems.
- Fix command line auto-complete of CPU events on aarch64.
Build:
- Fix 'perf probe' and 'perf test' when libtraceevent isn't linked,
as several tests use tracepoints, those should be skipped.
- More fallout fixes for the removal of tools/lib/traceevent/.
- Fix build error when linking with libpfm"
* tag 'perf-tools-for-v6.3-1-2023-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (114 commits)
perf tests stat_all_metrics: Change true workload to sleep workload for system wide check
perf vendor events power10: Add JSON metric events to present CPI stall cycles in powerpc
perf intel-pt: Synthesize cycle events
perf c2c: Add report option to show false sharing in adjacent cachelines
perf record: Fix segfault with --overwrite and --max-size
perf stat: Avoid merging/aggregating metric counts twice
perf tools: Fix perf tool build error in util/pfm.c
perf tools: Fix auto-complete on aarch64
perf lock contention: Support old rw_semaphore type
perf lock contention: Add -o/--lock-owner option
perf lock contention: Fix to save callstack for the default modified
perf test bpf: Skip test if kernel-debuginfo is not present
perf probe: Update the exit error codes in function try_to_find_probe_trace_event
perf script: Fix missing Retire Latency fields option documentation
perf event x86: Add retire_lat when synthesizing PERF_SAMPLE_WEIGHT_STRUCT
perf test x86: Support the retire_lat (Retire Latency) sample_type check
perf test bpf: Check for libtraceevent support
perf script: Support Retire Latency
perf report: Support Retire Latency
perf lock contention: Support filters for different aggregation
...
- Add function names as a way to filter function addresses
- Add sample module to test ftrace ops and dynamic trampolines
- Allow stack traces to be passed from beginning event to end event for
synthetic events. This will allow seeing the stack trace of when a task is
scheduled out and recorded when it gets scheduled back in.
- Add trace event helper __get_buf() to use as a temporary buffer when printing
out trace event output.
- Add kernel command line to create trace instances on boot up.
- Add enabling of events to instances created at boot up.
- Add trace_array_puts() to write into instances.
- Allow boot instances to take a snapshot at the end of boot up.
- Allow live patch modules to include trace events
- Minor fixes and clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY/PaaBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qh5iAPoD0LKZzD33rhO5Ec4hoexE0DkqycP3
dvmOMbCBL8GkxwEA+d2gLz/EquSFm166hc4D79Sn3geCqvkwmy8vQWVjIQc=
=M82D
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Add function names as a way to filter function addresses
- Add sample module to test ftrace ops and dynamic trampolines
- Allow stack traces to be passed from beginning event to end event for
synthetic events. This will allow seeing the stack trace of when a
task is scheduled out and recorded when it gets scheduled back in.
- Add trace event helper __get_buf() to use as a temporary buffer when
printing out trace event output.
- Add kernel command line to create trace instances on boot up.
- Add enabling of events to instances created at boot up.
- Add trace_array_puts() to write into instances.
- Allow boot instances to take a snapshot at the end of boot up.
- Allow live patch modules to include trace events
- Minor fixes and clean ups
* tag 'trace-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (31 commits)
tracing: Remove unnecessary NULL assignment
tracepoint: Allow livepatch module add trace event
tracing: Always use canonical ftrace path
tracing/histogram: Fix stacktrace histogram Documententation
tracing/histogram: Fix stacktrace key
tracing/histogram: Fix a few problems with stacktrace variable printing
tracing: Add BUILD_BUG() to make sure stacktrace fits in strings
tracing/histogram: Don't use strlen to find length of stacktrace variables
tracing: Allow boot instances to have snapshot buffers
tracing: Add trace_array_puts() to write into instance
tracing: Add enabling of events to boot instances
tracing: Add creation of instances at boot command line
tracing: Fix trace_event_raw_event_synth() if else statement
samples: ftrace: Make some global variables static
ftrace: sample: avoid open-coded 64-bit division
samples: ftrace: Include the nospec-branch.h only for x86
tracing: Acquire buffer from temparary trace sequence
tracing/histogram: Wrap remaining shell snippets in code blocks
tracing/osnoise: No need for schedule_hrtimeout range
bpf/tracing: Use stage6 of tracing to not duplicate macros
...
With the change that allows to read the "trace" file without disabling
writing to the ring buffer, there was an integrity check of the ring
buffer in the iterator read code, that expected the ring buffer to be
write disabled. This caused the integrity check to trigger when stress
reading the "trace" file while writing was happening.
The integrity check is a bit aggressive (and has never triggered in
practice). Change it so that it checks just the integrity of the linked
pages without clearing the flags inside the pointers. This removes the
warning that was being triggered.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY+05KBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qm2uAQDpygn75IrW1aApx5wySl2GKo0dSjg9
PaQVTYFYLMxIqgEA7oZQFQwokmZrIThqcQ+JA710+C1xecKYUl+apGza9Qk=
=aTTM
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.2-rc7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix race that causes a warning of corrupt ring buffer
With the change that allows to read the "trace" file without disabling
writing to the ring buffer, there was an integrity check of the ring
buffer in the iterator read code, that expected the ring buffer to be
write disabled. This caused the integrity check to trigger when stress
reading the "trace" file while writing was happening.
The integrity check is a bit aggressive (and has never triggered in
practice). Change it so that it checks just the integrity of the
linked pages without clearing the flags inside the pointers. This
removes the warning that was being triggered"
[ Heh. This was supposed to have gone in last week before the 6.2
release, but Steven forgot to actually add me to the participants of
the pull request, so here it is, a week later - Linus ]
* tag 'trace-v6.2-rc7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Handle race between rb_move_tail and rb_check_pages
- Use total duration to calculate average in rtla osnoise_hist
- Use 2 digit precision for displaying average
- Print an intuitive auto analysis of timerlat results
- Add auto analysis to timerlat top
- Add hwnoise, which is the same as osnoise but focuses on hardware
- Small clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY/PB/hQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qo6mAP9Ul7TSaiQ56H0yy5GCwokOBbj2JnkY
N2NCtCv8AEFDDgD/ZgWWLNHglDWfD9V/aAPI5zWGoep3DfnOL5bCWhT/Agg=
=eM96
-----END PGP SIGNATURE-----
Merge tag 'trace-tools-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tools updates from Steven Rostedt:
- Use total duration to calculate average in rtla osnoise_hist
- Use 2 digit precision for displaying average
- Print an intuitive auto analysis of timerlat results
- Add auto analysis to timerlat top
- Add hwnoise, which is the same as osnoise but focuses on hardware
- Small clean ups
* tag 'trace-tools-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation/rtla: Add hwnoise man page
rtla: Add hwnoise tool
Documentation/rtla: Add timerlat-top auto-analysis options
rtla/timerlat: Add auto-analysis support to timerlat top
rtla/timerlat: Add auto-analysis core
tools/tracing/rtla: osnoise_hist: display average with two-digit precision
tools/tracing/rtla: osnoise_hist: use total duration for average calculation
tools/rv: Remove unneeded semicolon
devm_request_region is for I/O regions. Use devm_request_mem_region
instead. This fixes the driver failing to probe since 99df45c9e0
("sunhme: fix an IS_ERR() vs NULL check in probe"), which checked the
result.
Fixes: 914d9b2711 ("sunhme: switch to devres")
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230222204242.2658247-1-seanga2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix three instances that the tty is not given back to the console on exit.
Forcing the user to do a "reset" to get the console back.
- Fix the console monitor to not hang when too much data is given by the ssh
output.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY/OmkhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlfKAP9ijinbEXt+fuuhjB0HqmERelUBKH9g
9HiQl+yzKh2LiQEAgnOKK8j3MO1VUOlmVso38+Kc3Tp1jEr0KbooTqKiPAU=
=aoI2
-----END PGP SIGNATURE-----
Merge tag 'ktest-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
- Fix three instances that the tty is not given back to the console on
exit. Forcing the user to do a "reset" to get the console back.
- Fix the console monitor to not hang when too much data is given by
the ssh output.
* tag 'ktest-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Restore stty setting at first in dodie
ktest.pl: Add RUN_TIMEOUT option with default unlimited
ktest.pl: Give back console on Ctrt^C on monitor
ktest.pl: Fix missing "end_monitor" when machine check fails
This KUnit update for Linux 6.3-rc1 consists of cleanups, new features,
and documentation updates:
-- adds Function Redirection API to isolate the code being tested from
other parts of the kernel. functionredirection.rst has the details.
-----BEGIN PGP SIGNATURE-----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=PloE
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit update from Shuah Khan:
- add Function Redirection API to isolate the code being tested from
other parts of the kernel.
Documentation/dev-tools/kunit/api/functionredirection.rst has the
details.
* tag 'linux-kselftest-kunit-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Add printf attribute to fail_current_test_impl
lib/hashtable_test.c: add test for the hashtable structure
Documentation: Add Function Redirection API docs
kunit: Expose 'static stub' API to redirect functions
kunit: Add "hooks" to call into KUnit when it's built as a module
kunit: kunit.py extract handlers
tools/testing/kunit/kunit.py: remove redundant double check
o Add s390 support.
o Add support for the ARM Thumb1 instruction set.
o Fix O_* flags definitions for open() and fcntl().
o Make errno a weak symbol instead of a static variable.
o Export environ as a weak symbol.
o Export _auxv as a weak symbol for auxilliary vector retrieval.
o Implement getauxval() and getpagesize().
o Further improve self tests, including permitting userland testing
of the nolibc library.
-----BEGIN PGP SIGNATURE-----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=S+cL
-----END PGP SIGNATURE-----
Merge tag 'nolibc.2023.02.06a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc updates from Paul McKenney:
- Add s390 support
- Add support for the ARM Thumb1 instruction set
- Fix O_* flags definitions for open() and fcntl()
- Make errno a weak symbol instead of a static variable
- Export environ as a weak symbol
- Export _auxv as a weak symbol for auxilliary vector retrieval
- Implement getauxval() and getpagesize()
- Further improve self tests, including permitting userland testing of
the nolibc library
* tag 'nolibc.2023.02.06a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (28 commits)
selftests/nolibc: Add a "run-user" target to test the program in user land
selftests/nolibc: Support "x86_64" for arch name
selftests/nolibc: Add `getpagesize(2)` selftest
nolibc/sys: Implement `getpagesize(2)` function
nolibc/stdlib: Implement `getauxval(3)` function
tools/nolibc: add auxiliary vector retrieval for s390
tools/nolibc: add auxiliary vector retrieval for mips
tools/nolibc: add auxiliary vector retrieval for riscv
tools/nolibc: add auxiliary vector retrieval for arm
tools/nolibc: add auxiliary vector retrieval for arm64
tools/nolibc: add auxiliary vector retrieval for x86_64
tools/nolibc: add auxiliary vector retrieval for i386
tools/nolibc: export environ as a weak symbol on s390
tools/nolibc: export environ as a weak symbol on riscv
tools/nolibc: export environ as a weak symbol on mips
tools/nolibc: export environ as a weak symbol on arm
tools/nolibc: export environ as a weak symbol on arm64
tools/nolibc: export environ as a weak symbol on i386
tools/nolibc: export environ as a weak symbol on x86_64
tools/nolibc: make errno a weak symbol instead of a static one
...
Add diagnostics to the x86 NMI handler to help detect NMI-handler bugs
on the one hand and failing hardware on the other.
-----BEGIN PGP SIGNATURE-----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=MPMw
-----END PGP SIGNATURE-----
Merge tag 'nmi.2023.02.14a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull x86 NMI diagnostics from Paul McKenney:
"Add diagnostics to the x86 NMI handler to help detect NMI-handler bugs
on the one hand and failing hardware on the other"
* tag 'nmi.2023.02.14a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
x86/nmi: Print reasons why backtrace NMIs are ignored
x86/nmi: Accumulate NMI-progress evidence in exc_nmi()
Documentation updates.
Add read-modify-write sequences, which means that stronger primitives
more consistently result in stronger ordering, while still remaining in
the envelope of the hardware that supports Linux.
Address, data, and control dependencies used to ignore data that was
stored in temporaries. This update extends these dependency chains to
include unmarked intra-thread stores and loads. Note that these unmarked
stores and loads should not be concurrently accessed from multiple
threads, and doing so will cause LKMM to flag such accesses as data races.
-----BEGIN PGP SIGNATURE-----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=uGmQ
-----END PGP SIGNATURE-----
Merge tag 'lkmm.2023.02.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull LKMM (Linux Kernel Memory Model) updates from Paul McKenney:
"Documentation updates.
Add read-modify-write sequences, which means that stronger primitives
more consistently result in stronger ordering, while still remaining
in the envelope of the hardware that supports Linux.
Address, data, and control dependencies used to ignore data that was
stored in temporaries. This update extends these dependency chains to
include unmarked intra-thread stores and loads. Note that these
unmarked stores and loads should not be concurrently accessed from
multiple threads, and doing so will cause LKMM to flag such accesses
as data races"
* tag 'lkmm.2023.02.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools: memory-model: Make plain accesses carry dependencies
Documentation: Fixed a typo in atomic_t.txt
tools: memory-model: Add rmw-sequences to the LKMM
locking/memory-barriers.txt: Improve documentation for writel() example
