Cong Wang says:
====================
net_sched: two security bug fixes and test cases
This patchset contains two bug fixes reported in security mailing list,
and test cases for both of them.
====================
Link: https://patch.msgid.link/20250204005841.223511-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Integrate the test case provided by Mingi Cho into TDC.
All test results:
1..4
ok 1 ca5e - Check class delete notification for ffff:
ok 2 e4b7 - Check class delete notification for root ffff:
ok 3 33a9 - Check ingress is not searchable on backlog update
ok 4 a4b9 - Test class qlen notification
Cc: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://patch.msgid.link/20250204005841.223511-5-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qdisc_tree_reduce_backlog() notifies parent qdisc only if child
qdisc becomes empty, therefore we need to reduce the backlog of the
child qdisc before calling it. Otherwise it would miss the opportunity
to call cops->qlen_notify(), in the case of DRR, it resulted in UAF
since DRR uses ->qlen_notify() to maintain its active list.
Fixes: f8d4bc4550 ("net/sched: netem: account for backlog updates from child qdisc")
Cc: Martin Ottens <martin.ottens@fau.de>
Reported-by: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://patch.msgid.link/20250204005841.223511-4-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When limit == 0, pfifo_tail_enqueue() must drop new packet and
increase dropped packets count of the qdisc.
All test results:
1..16
ok 1 a519 - Add bfifo qdisc with system default parameters on egress
ok 2 585c - Add pfifo qdisc with system default parameters on egress
ok 3 a86e - Add bfifo qdisc with system default parameters on egress with handle of maximum value
ok 4 9ac8 - Add bfifo qdisc on egress with queue size of 3000 bytes
ok 5 f4e6 - Add pfifo qdisc on egress with queue size of 3000 packets
ok 6 b1b1 - Add bfifo qdisc with system default parameters on egress with invalid handle exceeding maximum value
ok 7 8d5e - Add bfifo qdisc on egress with unsupported argument
ok 8 7787 - Add pfifo qdisc on egress with unsupported argument
ok 9 c4b6 - Replace bfifo qdisc on egress with new queue size
ok 10 3df6 - Replace pfifo qdisc on egress with new queue size
ok 11 7a67 - Add bfifo qdisc on egress with queue size in invalid format
ok 12 1298 - Add duplicate bfifo qdisc on egress
ok 13 45a0 - Delete nonexistent bfifo qdisc
ok 14 972b - Add prio qdisc on egress with invalid format for handles
ok 15 4d39 - Delete bfifo qdisc twice
ok 16 d774 - Check pfifo_head_drop qdisc enqueue behaviour when limit == 0
Signed-off-by: Quang Le <quanglex97@gmail.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://patch.msgid.link/20250204005841.223511-3-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expected behaviour:
In case we reach scheduler's limit, pfifo_tail_enqueue() will drop a
packet in scheduler's queue and decrease scheduler's qlen by one.
Then, pfifo_tail_enqueue() enqueue new packet and increase
scheduler's qlen by one. Finally, pfifo_tail_enqueue() return
`NET_XMIT_CN` status code.
Weird behaviour:
In case we set `sch->limit == 0` and trigger pfifo_tail_enqueue() on a
scheduler that has no packet, the 'drop a packet' step will do nothing.
This means the scheduler's qlen still has value equal 0.
Then, we continue to enqueue new packet and increase scheduler's qlen by
one. In summary, we can leverage pfifo_tail_enqueue() to increase qlen by
one and return `NET_XMIT_CN` status code.
The problem is:
Let's say we have two qdiscs: Qdisc_A and Qdisc_B.
- Qdisc_A's type must have '->graft()' function to create parent/child relationship.
Let's say Qdisc_A's type is `hfsc`. Enqueue packet to this qdisc will trigger `hfsc_enqueue`.
- Qdisc_B's type is pfifo_head_drop. Enqueue packet to this qdisc will trigger `pfifo_tail_enqueue`.
- Qdisc_B is configured to have `sch->limit == 0`.
- Qdisc_A is configured to route the enqueued's packet to Qdisc_B.
Enqueue packet through Qdisc_A will lead to:
- hfsc_enqueue(Qdisc_A) -> pfifo_tail_enqueue(Qdisc_B)
- Qdisc_B->q.qlen += 1
- pfifo_tail_enqueue() return `NET_XMIT_CN`
- hfsc_enqueue() check for `NET_XMIT_SUCCESS` and see `NET_XMIT_CN` => hfsc_enqueue() don't increase qlen of Qdisc_A.
The whole process lead to a situation where Qdisc_A->q.qlen == 0 and Qdisc_B->q.qlen == 1.
Replace 'hfsc' with other type (for example: 'drr') still lead to the same problem.
This violate the design where parent's qlen should equal to the sum of its childrens'qlen.
Bug impact: This issue can be used for user->kernel privilege escalation when it is reachable.
Fixes: 57dbb2d83d ("sched: add head drop fifo queue")
Reported-by: Quang Le <quanglex97@gmail.com>
Signed-off-by: Quang Le <quanglex97@gmail.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://patch.msgid.link/20250204005841.223511-2-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The '-f' parameter is there to force the kernel to emit MPTCP FASTCLOSE
by closing the connection with unread bytes in the receive queue.
The xdisconnect() helper was used to stop the connection, but it does
more than that: it will shut it down, then wait before reconnecting to
the same address. This causes the mptcp_join's "fastclose test" to fail
all the time.
This failure is due to a recent change, with commit 218cc16632
("selftests: mptcp: avoid spurious errors on disconnect"), but that went
unnoticed because the test is currently ignored. The recent modification
only shown an existing issue: xdisconnect() doesn't need to be used
here, only the shutdown() part is needed.
Fixes: 6bf41020b7 ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250204-net-mptcp-sft-conn-f-v1-1-6b470c72fffa@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Starting with Rust 1.86.0 (currently in nightly, to be released on
2025-04-03), the `missing_abi` lint is warn-by-default [1]:
error: extern declarations without an explicit ABI are deprecated
--> rust/doctests_kernel_generated.rs:3158:1
|
3158 | extern {
| ^^^^^^ help: explicitly specify the C ABI: `extern "C"`
|
= note: `-D missing-abi` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(missing_abi)]`
Thus clean it up.
Cc: <stable@vger.kernel.org> # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Fixes: 7f8977a7fe ("rust: init: add `{pin_}chain` functions to `{Pin}Init<T, E>`")
Link: https://github.com/rust-lang/rust/pull/132397 [1]
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20250121200934.222075-1-ojeda@kernel.org
[ Added 6.13.y to Cc: stable tag. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
There seems to have been merge skew between commit b2c261fa86 ("rust:
kbuild: expand rusttest target for macros") and commit 0730422bce
("rust: use host dylib naming convention to support macOS") ; the latter
replaced `libmacros.so` with `$(libmacros_name)` and the former added an
instance of `libmacros.so`. The former was not yet applied when the
latter was sent, resulting in a stray `libmacros.so`. Replace the stray
with `$(libmacros_name)` to allow `rusttest` to build on macOS.
Fixes: 0730422bce ("rust: use host dylib naming convention to support macOS")
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250201-fix-mac-build-again-v1-1-ca665f5d7de7@gmail.com
[ Slightly reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The Eluktronics MECH-17 (GM7RG7N) needs IRQ overriding for the
keyboard to work.
Adding a DMI_MATCH entry for this laptop model makes the internal
keyboard function normally.
Signed-off-by: Gannon Kolding <gannon.kolding@gmail.com>
Link: https://patch.msgid.link/20250127093902.328361-1-gannon.kolding@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
While analysing code for software and OF node for the corner case when
caller asks to read zero items in the supposed to be an array of values
I found that ACPI behaves differently to what OF does, i.e.
1. It returns -EINVAL when caller asks to read zero items from integer
array, while OF returns 0, if no other errors happened.
2. It returns -EINVAL when caller asks to read zero items from string
array, while OF returns -ENODATA, if no other errors happened.
Amend ACPI implementation to follow what OF does.
Fixes: b31384fa5d ("Driver core: Unified device properties interface for platform firmware")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250203194629.3731895-1-andriy.shevchenko@linux.intel.com
[ rjw: Added empty line after a conditional ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Compile-testing without CONFIG_OF leads to a harmless build warning:
drivers/cpufreq/airoha-cpufreq.c:109:34: error: 'airoha_cpufreq_match_list' defined but not used [-Werror=unused-const-variable=]
109 | static const struct of_device_id airoha_cpufreq_match_list[] __initconst = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~
It would be possible to mark the variable as __maybe_unused to shut up
that warning, but a Kconfig dependency seems more appropriate as this still
allows build testing in allmodconfig and randconfig builds on all
architectures.
An earlier commit, b865a84046 ("cpufreq: airoha: Depends on OF"),
tried to fix it incorrectly. ARCH_AIROHA already requires CONFIG_OF, so
this change does nothing, and the dependency is still missing for the
COMPILE_TEST case.
Fix it properly.
Fixes: 84cf9e541c ("cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver")
Fixes: b865a84046 ("cpufreq: airoha: Depends on OF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ Viresh: updated commit log and fixed rebase conflict ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/9d51d2710061dfa7f2568287c6ed125b858b7318.1738580005.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In adjust_perf() callback, we are setting the max_perf to highest_perf,
as opposed to the correct limit value i.e. max_limit_perf. Fix that.
Fixes: 3f7b835fa4 ("cpufreq/amd-pstate: Move limit updating code")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-3-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Scope based guard/cleanup macros should not be used together with goto
labels. Hence, remove the goto label.
Fixes: 6c093d5a5b ("cpufreq/amd-pstate: convert mutex use to guard()")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-2-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Stack alignment of the kernel in 64-bit mode is 8, not 16, so the
dummy push in xen_hypercall_hvm() for aligning the stack to 16 bytes
can be removed.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
xen_hypercall_hvm() is missing a FRAME_END at the end, add it.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502030848.HTNTTuo9-lkp@intel.com/
Fixes: b4845bb638 ("x86/xen: add central hypercall functions")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
xen_hypercall_hvm(), which is used when running as a Xen PVH guest at
most only once during early boot, is clobbering %rbx. Depending on
whether the caller relies on %rbx to be preserved across the call or
not, this clobbering might result in an early crash of the system.
This can be avoided by using an already saved register instead of %rbx.
Fixes: b4845bb638 ("x86/xen: add central hypercall functions")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
-----BEGIN PGP SIGNATURE-----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=YjCE
-----END PGP SIGNATURE-----
Merge tag 'for-6.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- add lockdep annotation for relocation root to fix a splat warning
while merging roots
- fix assertion failure when splitting ordered extent after transaction
abort
- don't print 'qgroup inconsistent' message when rescan process updates
qgroup data sooner than the subvolume deletion process
- fix use-after-free (accessing the error number) when attempting to
join an aborted transaction
- avoid starting new transaction if not necessary when cleaning qgroup
during subvolume drop
* tag 'for-6.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: avoid starting new transaction when cleaning qgroup during subvolume drop
btrfs: fix use-after-free when attempting to join an aborted transaction
btrfs: do not output error message if a qgroup has been already cleaned up
btrfs: fix assertion failure when splitting ordered extent after transaction abort
btrfs: fix lockdep splat while merging a relocation root
Linus observed that the symbol_request(utf8_data_table) call fails when
CONFIG_UNICODE=y and CONFIG_TRIM_UNUSED_KSYMS=y.
symbol_get() relies on the symbol data being present in the ksymtab for
symbol lookups. However, EXPORT_SYMBOL_GPL(utf8_data_table) is dropped
due to CONFIG_TRIM_UNUSED_KSYMS, as no module references it in this case.
Probably, this has been broken since commit dbacb0ef67 ("kconfig option
for TRIM_UNUSED_KSYMS").
This commit addresses the issue by leveraging modpost. Symbol names
passed to symbol_get() are recorded in the special .no_trim_symbol
section, which is then parsed by modpost to forcibly keep such symbols.
The .no_trim_symbol section is discarded by the linker scripts, so there
is no impact on the size of the final vmlinux or modules.
This commit cannot resolve the issue for direct calls to __symbol_get()
because the symbol name is not known at compile-time.
Although symbol_get() may eventually be deprecated, this workaround
should be good enough meanwhile.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Clang's -Wformat-overflow and -Wformat-truncation have chosen to check
'%p' unlike GCC but it does not know about the kernel's pointer
extensions in lib/vsprintf.c, so the developers split that part of the
warning out for the kernel to disable because there will always be false
positives.
Commit 908dd50827 ("kbuild: enable -Wformat-truncation on clang") did
disabled these warnings but only in a block that would be called when
W=1 was not passed, so they would appear with W=1. Move the disabling of
the non-kprintf warnings to a block that always runs so that they are
never seen, regardless of warning level.
Fixes: 908dd50827 ("kbuild: enable -Wformat-truncation on clang")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501291646.VtwF98qd-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
While the Aeroflex Gaisler GRGPIO driver has no build-time dependency on
gpiolib-of, it supports only DT-based configuration, and is used only on
DT systems. Hence add a dependency on OF, to prevent asking the user
about this driver when configuring a kernel without DT support.
Fixes: bc40668def ("gpio: grgpio: drop Kconfig dependency on OF_GPIO")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/db6da3d11bf850d89f199e5c740d8f133e38078d.1738760539.git.geert+renesas@glider.be
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Depending on the user config, the leaf entry may be the hog directory,
not line. Check it and lock the correct item.
Fixes: 8bd76b3d3f ("gpio: sim: lock up configfs that an instantiated device depends on")
Tested-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250203110123.87701-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This reverts commit 56a50667cb. Mux
handling is not sufficiently implemented. It needs more time.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
This reverts commit 3cfe39b3a8. Mux
handling is not sufficiently implemented. It needs more time.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
This reverts commit
a2b5a99562 ("drm/amd/display: Use HW lock mgr for PSR1")
Because it may cause system hang while connect with two edp panel.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, there are several files in drm/amd/display that aim to have a
higher -Wframe-larger-than value to avoid instances of that warning with
a lower value from the user's configuration. However, with the way that
it is currently implemented, it does not respect the user's request via
CONFIG_FRAME_WARN for a higher stack frame limit, which can cause pain
when new instances of the warning appear and break the build due to
CONFIG_WERROR.
Adjust the logic to switch from a hard coded -Wframe-larger-than value
to only using the value as a minimum clamp and deferring to the
requested value from CONFIG_FRAME_WARN if it is higher.
Suggested-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Closes: https://lore.kernel.org/2025013003-audience-opposing-7f95@gregkh/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GPIO drivers with latch interrupt support (typically types starting
with PCAL) have interrupt status registers to determine which particular
inputs have caused an interrupt. Unfortunately there is no atomic
operation to read these registers and clear the interrupt. Clearing the
interrupt is done by reading the input registers.
The code was reading the interrupt status registers, and then reading
the input registers. If an input changed between these two events it was
lost.
The solution in this patch is to revert to the non-latch version of
code, i.e. remembering the previous input status, and looking for the
changes. This system results in no more I2C transfers, so is no slower.
The latch property of the device still means interrupts will still be
noticed if the input changes back to its initial state.
Fixes: 44896beae6 ("gpio: pca953x: add PCAL9535 interrupt support for Galileo Gen2")
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240606033102.2271916-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Initramfs building tools such as dracut will look for a MODULE_FIRMWARE()
declaration to determine which firmware to include in the initramfs
when a driver is included in the initramfs.
As amdxdna doesn't declare any firmware this causes the driver to fail
to load with -ENOENT when in the initramfs. Add the missing declaration
for possible firmware.
Reported-by: Renjith Pananchikkal <Renjith.Pananchikkal@amd.com>
Suggested-by: Alexander Deucher <Alexander.Deucher@amd.com>
Fixes: 8c9ff1b181 ("accel/amdxdna: Add a new driver for AMD AI Engine")
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250204174031.3425762-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204174031.3425762-1-superm1@kernel.org
- Properly handle return value when allocation fails for the preferred
affinity.
-----BEGIN PGP SIGNATURE-----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=lIYQ
-----END PGP SIGNATURE-----
Merge tag 'kthreads-fixes-2025-02-04' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthreads fix from Frederic Weisbecker:
- Properly handle return value when allocation fails for the preferred
affinity
* tag 'kthreads-fixes-2025-02-04' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks:
kthread: Fix return value on kzalloc() failure in kthread_affine_preferred()
Fixes:
- ideapad-laptop: Pass a correct pointer to the driver data
- intel/ifs: Provide a link to the IFS test images
- intel/pmc: Use large enough type when decoding LTR value
The following is an automated shortlog grouped by driver:
ideapad-laptop:
- pass a correct pointer to the driver data
intel/ifs:
- Update documentation with image download path
intel: pmc:
- fix ltr decode in pmc_core_ltr_show()
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ6HR1QAKCRBZrE9hU+XO
MZ66AP9MoxGhJJgR9A9+Rr+zwRLsbudl4XGJqGcDGFR4HeeVTwD3Q0mSBHvNW+XQ
yzwkyP+sySzQvoNu62n3GTsOnv75CA==
=b/yB
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- ideapad-laptop: Pass a correct pointer to the driver data
- intel/ifs: Provide a link to the IFS test images
- intel/pmc: Use large enough type when decoding LTR value
* tag 'platform-drivers-x86-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/ifs: Update documentation with image download path
platform/x86/intel: pmc: fix ltr decode in pmc_core_ltr_show()
platform/x86: ideapad-laptop: pass a correct pointer to the driver data
Commit 1c56e9a398 ("drm/i915/dp: Get optimal link config to have best
compressed bpp") tries to find the best compressed bpp for the
link. However, it iterates from max to min bpp on display 13+, and from
min to max on other platforms. This presumably leads to minimum
compressed bpp always being chosen on display 11-12.
Iterate from high to low on all platforms to actually use the best
possible compressed bpp.
Fixes: 1c56e9a398 ("drm/i915/dp: Get optimal link config to have best compressed bpp")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: <stable@vger.kernel.org> # v6.7+
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3bba67923cbcd13a59d26ef5fa4bb042b13c8a9b.1738327620.git.jani.nikula@intel.com
(cherry picked from commit 56b0337d42)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When waking a VM's NX huge page recovery thread, ensure the thread is
actually alive before trying to wake it. Now that the thread is spawned
on-demand during KVM_RUN, a VM without a recovery thread is reachable via
the related module params.
BUG: kernel NULL pointer dereference, address: 0000000000000040
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:vhost_task_wake+0x5/0x10
Call Trace:
<TASK>
set_nx_huge_pages+0xcc/0x1e0 [kvm]
param_attr_store+0x8a/0xd0
module_attr_store+0x1a/0x30
kernfs_fop_write_iter+0x12f/0x1e0
vfs_write+0x233/0x3e0
ksys_write+0x60/0xd0
do_syscall_64+0x5b/0x160
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f3b52710104
</TASK>
Modules linked in: kvm_intel kvm
CR2: 0000000000000040
Fixes: 931656b9e2 ("kvm: defer huge page recovery vhost task to later")
Cc: stable@vger.kernel.org
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250124234623.3609069-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only statement in a kvm_arch_post_init_vm implementation
can be moved into the x86 kvm_arch_init_vm. Do so and remove all
traces from architecture-independent code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is a spelling mistake in a literal string and in the function
test_get_inital_dirty. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Message-ID: <20250204105647.367743-1-colin.i.king@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
- Propagate ownership of debug registers in protected mode after
the rework that landed in 6.14-rc1
- Stop pretending that we can run the protected mode without a GICv3
being present on the host
- Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
- Always evaluate the need to arm a background timer for fully emulated
guest timers
- Fix the emulation of EL1 timers in the absence of FEAT_ECV
- Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
-----BEGIN PGP SIGNATURE-----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=idVr
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.14, take #1
- Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
- Propagate ownership of debug registers in protected mode after
the rework that landed in 6.14-rc1
- Stop pretending that we can run the protected mode without a GICv3
being present on the host
- Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
- Always evaluate the need to arm a background timer for fully emulated
guest timers
- Fix the emulation of EL1 timers in the absence of FEAT_ECV
- Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
- move some kvm-related functions from mm into kvm
- remove all usage of page->index and page->lru from kvm
- fixes and cleanups for vsie
-----BEGIN PGP SIGNATURE-----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=zCOv
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-6.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- some selftest fixes
- move some kvm-related functions from mm into kvm
- remove all usage of page->index and page->lru from kvm
- fixes and cleanups for vsie
SYNTHESIZED_F() generally is used together with setup_force_cpu_cap(),
i.e. when it makes sense to present the feature even if cpuid does not
have it *and* the VM is not able to see the difference. For example,
it can be used when mitigations on the host automatically protect
the guest as well.
The "SYNTHESIZED_F(SRSO_USER_KERNEL_NO)" line came in as a conflict
resolution between the CPUID overhaul from the KVM tree and support
for the feature in the x86 tree. Using it right now does not hurt,
or make a difference for that matter, because there is no
setup_force_cpu_cap(X86_FEATURE_SRSO_USER_KERNEL_NO). However, it
is a little less future proof in case such a setup_force_cpu_cap()
appears later, for a case where the kernel somehow is not vulnerable
but the guest would have to apply the mitigation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The way we deal with the EL2 virtual timer is a bit odd.
We try to cope with E2H being flipped, and adjust which offset
applies to that timer depending on the current E2H value. But that's
a complexity we shouldn't have to worry about.
What we have to deal with is either E2H being RES1, in which case
there is no offset, or E2H being RES0, and the virtual timer simply
does not exist.
Drop the adjusting of the timer offset, which makes things a bit
simpler. At the same time, make sure that accessing the HV timer
when E2H is RES0 results in an UNDEF in the guest.
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250204110050.150560-4-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Both Wei-Lin Chang and Volodymyr Babchuk report that the way we
handle the emulation of EL1 timers with NV is completely wrong,
specially in the case of HCR_EL2.E2H==0.
There are three problems in about as many lines of code:
- With E2H==0, the EL1 timers are overwritten with the EL1 state,
while they should actually contain the EL2 state (as per the timer
map)
- With E2H==1, we run the full EL1 timer emulation even when ECV
is present, hiding a bug in timer_emulate() (see previous patch)
- The comments are actively misleading, and say all the wrong things.
This is only attributable to the code having been initially written
for FEAT_NV, hacked up to handle FEAT_NV2 *in parallel*, and vaguely
hacked again to be FEAT_NV2 only. Oh, and yours truly being a gold
plated idiot.
The fix is obvious: just delete most of the E2H==0 code, have a unified
handling of the timers (because they really are E2H agnostic), and
make sure we don't execute any of that when FEAT_ECV is present.
Fixes: 4bad3068cf ("KVM: arm64: nv: Sync nested timer state with FEAT_NV2")
Reported-by: Wei-Lin Chang <r09922117@csie.ntu.edu.tw>
Reported-by: Volodymyr Babchuk <Volodymyr_Babchuk@epam.com>
Link: https://lore.kernel.org/r/fqiqfjzwpgbzdtouu2pwqlu7llhnf5lmy4hzv5vo6ph4v3vyls@jdcfy3fjjc5k
Link: https://lore.kernel.org/r/87frl51tse.fsf@epam.com
Tested-by: Dmytro Terletskyi <dmytro_terletskyi@epam.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250204110050.150560-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
When updating the interrupt state for an emulated timer, we return
early and skip the setup of a soft timer that runs in parallel
with the guest.
While this is OK if we have set the interrupt pending, it is pretty
wrong if the guest moved CVAL into the future. In that case,
no timer is armed and the guest can wait for a very long time
(it will take a full put/load cycle for the situation to resolve).
This is specially visible with EDK2 running at EL2, but still
using the EL1 virtual timer, which in that case is fully emulated.
Any key-press takes ages to be captured, as there is no UART
interrupt and EDK2 relies on polling from a timer...
The fix is simply to drop the early return. If the timer interrupt
is pending, we will still return early, and otherwise arm the soft
timer.
Fixes: 4d74ecfa64 ("KVM: arm64: Don't arm a hrtimer for an already pending timer")
Cc: stable@vger.kernel.org
Tested-by: Dmytro Terletskyi <dmytro_terletskyi@epam.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250204110050.150560-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
For each vcpu that userspace creates, we allocate a number of
s2_mmu structures that will eventually contain our shadow S2
page tables.
Since this is a dynamically allocated array, we reallocate
the array and initialise the newly allocated elements. Once
everything is correctly initialised, we adjust pointer and size
in the kvm structure, and move on.
But should that initialisation fail *and* the reallocation triggered
a copy to another location, we end-up returning early, with the
kvm structure still containing the (now stale) old pointer. Weeee!
Cure it by assigning the pointer early, and use this to perform
the initialisation. If everything succeeds, we adjust the size.
Otherwise, we just leave the size as it was, no harm done, and the
new memory is as good as the ol' one (we hope...).
Fixes: 4f128f8e1a ("KVM: arm64: nv: Support multiple nested Stage-2 mmu structures")
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Link: https://lore.kernel.org/r/20250204145554.774427-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The rxrpc_connection attend queue is never used because conn::attend_link
is never initialised and so is always NULL'd out and thus always appears to
be busy. This requires the following fix:
(1) Fix this the attend queue problem by initialising conn::attend_link.
And, consequently, two further fixes for things masked by the above bug:
(2) Fix rxrpc_input_conn_event() to handle being invoked with a NULL
sk_buff pointer - something that can now happen with the above change.
(3) Fix the RXRPC_SKB_MARK_SERVICE_CONN_SECURED message to carry a pointer
to the connection and a ref on it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Fixes: f2cce89a07 ("rxrpc: Implement a mechanism to send an event notification to a connection")
Link: https://patch.msgid.link/20250203110307.7265-3-dhowells@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The documentation previously listed the path to download In Field Scan
(IFS) test images as "TBD".
Update the documentation to include the correct image download
location. Also move the download link to the appropriate section within
the documentation.
Reported-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20250131205315.1585663-1-jithu.joseph@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
