Convert dummy driver from ndo_set_rx_mode to ndo_set_rx_mode_async.
The dummy driver's set_multicast_list is a no-op, so the conversion
is straightforward: update the signature and the ops assignment.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-12-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert netdevsim from ndo_set_rx_mode to ndo_set_rx_mode_async.
The callback is a no-op stub so just update the signature and
ops struct wiring.
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-11-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert iavf from ndo_set_rx_mode to ndo_set_rx_mode_async.
iavf_set_rx_mode now takes explicit uc/mc list parameters and
uses __hw_addr_sync_dev on the snapshots instead of __dev_uc_sync
and __dev_mc_sync.
The iavf_configure internal caller passes the real lists directly.
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-10-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With the introduction of ndo_set_rx_mode_async (as discussed in [1])
we can call bnxt_cfg_rx_mode directly. Convert bnxt_cfg_rx_mode to
use uc/mc snapshots and move its call in bnxt_sp_task to the
section that resets BNXT_STATE_IN_SP_TASK. Switch to direct call in
bnxt_set_rx_mode.
Link: https://lore.kernel.org/netdev/CACKFLi=5vj8hPqEUKDd8RTw3au5G+zRgQEqjF+6NZnyoNm90KA@mail.gmail.com/ [1]
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-9-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert bnxt from ndo_set_rx_mode to ndo_set_rx_mode_async.
bnxt_set_rx_mode, bnxt_mc_list_updated and bnxt_uc_list_updated
now take explicit uc/mc list parameters and iterate with
netdev_hw_addr_list_for_each instead of netdev_for_each_{uc,mc}_addr.
The bnxt_cfg_rx_mode internal caller passes the real lists under
netif_addr_lock_bh.
BNXT_RX_MASK_SP_EVENT is still used here, next patch converts to
the direct call.
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-8-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert mlx5 from ndo_set_rx_mode to ndo_set_rx_mode_async. The
driver's mlx5e_set_rx_mode now receives uc/mc snapshots and calls
mlx5e_fs_set_rx_mode_work directly instead of queueing work.
mlx5e_sync_netdev_addr and mlx5e_handle_netdev_addr now take
explicit uc/mc list parameters and iterate with
netdev_hw_addr_list_for_each instead of netdev_for_each_{uc,mc}_addr.
Fallback to netdev's uc/mc in a few places and grab addr lock.
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Cc: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-7-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert fbnic from ndo_set_rx_mode to ndo_set_rx_mode_async. The
driver's __fbnic_set_rx_mode() now takes explicit uc/mc list
parameters and uses __hw_addr_sync_dev() on the snapshots instead
of __dev_uc_sync/__dev_mc_sync on the netdev directly.
Update callers in fbnic_up, fbnic_fw_config_after_crash,
fbnic_bmc_rpc_check and fbnic_set_mac to pass the real address
lists calling __fbnic_set_rx_mode outside the async work path.
Cc: Alexander Duyck <alexanderduyck@fb.com>
Cc: kernel-team@meta.com
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-6-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move unicast promiscuity tracking into netdev_rx_mode_work so it runs
under netdev_ops_lock instead of under the addr_lock spinlock. This
is required because __dev_set_promiscuity calls dev_change_rx_flags
and __dev_notify_flags, both of which may need to sleep.
Change ASSERT_RTNL() to netdev_ops_assert_locked() in
__dev_set_promiscuity, netif_set_allmulti and __dev_change_flags
since these are now called from the work queue under the ops lock.
Link: https://lore.kernel.org/netdev/20260214033859.43857-1-jiayuan.chen@linux.dev/
Fixes: 78cd408356 ("net: add missing instance lock to dev_set_promiscuity")
Reported-by: syzbot+2b3391f44313b3983e91@syzkaller.appspotmail.com
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-5-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a per-device netdev_hw_addr_list cache (rx_mode_addr_cache) that
allows __hw_addr_list_snapshot() and __hw_addr_list_reconcile() to
reuse previously allocated entries instead of hitting GFP_ATOMIC on
every snapshot cycle.
snapshot pops entries from the cache when available, falling back to
__hw_addr_create(). reconcile splices both snapshot lists back into
the cache via __hw_addr_splice(). The cache is flushed in
free_netdev().
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-4-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add ndo_set_rx_mode_async callback that drivers can implement instead
of the legacy ndo_set_rx_mode. The legacy callback runs under the
netif_addr_lock spinlock with BHs disabled, preventing drivers from
sleeping. The async variant runs from a work queue with rtnl_lock and
netdev_lock_ops held, in fully sleepable context.
When __dev_set_rx_mode() sees ndo_set_rx_mode_async, it schedules
netdev_rx_mode_work instead of calling the driver inline. The work
function takes two snapshots of each address list (uc/mc) under
the addr_lock, then drops the lock and calls the driver with the
work copies. After the driver returns, it reconciles the snapshots
back to the real lists under the lock.
Add netif_rx_mode_sync() to opportunistically execute the pending
workqueue update inline, so that rx mode changes are committed
before returning to userspace:
- dev_change_flags (SIOCSIFFLAGS / RTM_NEWLINK)
- dev_set_promiscuity
- dev_set_allmulti
- dev_ifsioc SIOCADDMULTI / SIOCDELMULTI
- do_setlink (RTM_SETLINK)
Note that some deep hierarchies still do skip the lower updates via:
- dev_uc_sync
- dev_mc_sync
If we do end up hitting user-visible issues, we can add more calls to
netif_rx_mode_sync in specific places. But hopefully we should not,
the actual user-visible lists are still synced, it's that just HW state
that might be lagging.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-3-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce __hw_addr_list_snapshot() and __hw_addr_list_reconcile()
for use by the upcoming ndo_set_rx_mode_async callback.
The async rx_mode path needs to snapshot the device's unicast and
multicast address lists under the addr_lock, hand those snapshots
to the driver (which may sleep), and then propagate any sync_cnt
changes back to the real lists. Two identical snapshots are taken:
a work copy for the driver to pass to __hw_addr_sync_dev() and a
reference copy to compute deltas against.
__hw_addr_list_reconcile() walks the reference snapshot comparing
each entry against the work snapshot to determine what the driver
synced or unsynced. It then applies those deltas to the real list,
handling concurrent modifications:
- If the real entry was concurrently removed but the driver synced
it to hardware (delta > 0), re-insert a stale entry so the next
work run properly unsyncs it from hardware.
- If the entry still exists, apply the delta normally. An entry
whose refcount drops to zero is removed.
# dev_addr_test_snapshot_benchmark: 1024 addrs x 1000 snapshots: 89872802 ns total, 89872 ns/iter
# dev_addr_test_snapshot_benchmark.speed: slow
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260416185712.2155425-2-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Restore the flag that indicates that the hook is going away, ie.
NFT_HOOK_REMOVE, but add a new transaction object to track deletion
of hooks without altering the basechain/flowtable hook_list during
the preparation phase.
The existing approach that moves the hook from the basechain/flowtable
hook_list to transaction hook_list breaks netlink dump path readers
of this RCU-protected list.
It should be possible use an array for nft_trans_hook to store the
deleted hooks to compact the representation but I am not expecting
many hook object, specially now that wildcard support for devices
is in place.
Note that the nft_trans_chain_hooks() list contains a list of struct
nft_trans_hook objects for DELCHAIN and DELFLOWTABLE commands, while
this list stores struct nft_hook objects for NEWCHAIN and NEWFLOWTABLE.
Note that new commands can be updated to use nft_trans_hook for
consistency.
This patch also adapts the event notification path to deal with the list
of hook transactions.
Fixes: 7d937b1071 ("netfilter: nf_tables: support for deleting devices in an existing netdev chain")
Fixes: b6d9014a33 ("netfilter: nf_tables: delete flowtable hooks via transaction list")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Publish new hooks in the list into the basechain/flowtable using
splice_list_rcu() to ensure netlink dump list traversal via rcu is safe
while concurrent ruleset update is going on.
Fixes: 78d9f48f7f ("netfilter: nf_tables: add devices to existing flowtable")
Fixes: b9703ed44f ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds a helper function, list_splice_rcu(), to safely splice
a private (non-RCU-protected) list into an RCU-protected list.
The function ensures that only the pointer visible to RCU readers
(prev->next) is updated using rcu_assign_pointer(), while the rest of
the list manipulations are performed with regular assignments, as the
source list is private and not visible to concurrent RCU readers.
This is useful for moving elements from a private list into a global
RCU-protected list, ensuring safe publication for RCU readers.
Subsystems with some sort of batching mechanism from userspace can
benefit from this new function.
The function __list_splice_rcu() has been added for clarity and to
follow the same pattern as in the existing list_splice*() interfaces,
where there is a check to ensure that the list to splice is not
empty. Note that __list_splice_rcu() has no documentation for this
reason.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nft_netdev_unregister_hooks and __nft_unregister_flowtable_net_hooks need
to use list_del_rcu(), this list can be walked by concurrent dumpers.
Add a new helper and use it consistently.
Fixes: f9a43007d3 ("netfilter: nf_tables: double hook unregistration in netns path")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Weiming Shi says:
"arp_packet_match() unconditionally parses the ARP payload assuming two
hardware addresses are present (source and target). However,
IPv4-over-IEEE1394 ARP (RFC 2734) omits the target hardware address
field, and arp_hdr_len() already accounts for this by returning a
shorter length for ARPHRD_IEEE1394 devices.
As a result, on IEEE1394 interfaces arp_packet_match() advances past a
nonexistent target hardware address and reads the wrong bytes for both
the target device address comparison and the target IP address. This
causes arptables rules to match against garbage data, leading to
incorrect filtering decisions: packets that should be accepted may be
dropped and vice versa.
The ARP stack in net/ipv4/arp.c (arp_create and arp_process) already
handles this correctly by skipping the target hardware address for
ARPHRD_IEEE1394. Apply the same pattern to arp_packet_match()."
Mangle the original patch to always return 0 (no match) in case user
matches on the target hardware address which is never present in
IEEE1394.
Note that this returns 0 (no match) for either normal and inverse match
because matching in the target hardware address in ARPHRD_IEEE1394 has
never been supported by arptables. This is intentional, matching on the
target hardware address should never evaluate true for ARPHRD_IEEE1394.
Moreover, adjust arpt_mangle to drop the packet too as AI suggests:
In arpt_mangle, the logic assumes a standard ARP layout. Because
IEEE1394 (FireWire) omits the target hardware address, the linear
pointer arithmetic miscalculates the offset for the target IP address.
This causes mangling operations to write to the wrong location, leading
to packet corruption. To ensure safety, this patch drops packets
(NF_DROP) when mangling is requested for these fields on IEEE1394
devices, as the current implementation cannot correctly map the FireWire
ARP payload.
This omits both mangling target hardware and IP address. Even if IP
address mangling should be possible in IEEE1394, this would require
to adjust arpt_mangle offset calculation, which has never been
supported.
Based on patch from Weiming Shi <bestswngs@gmail.com>.
Fixes: 6752c8db8e ("firewire net, ipv4 arp: Extend hardware address and remove driver-level packet inspection.")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
As sashiko reported [1], `lcn` was typed as `unsigned long` (or
`unsigned int` sometimes), which is only 32 bits wide on 32-bit
platforms, which causes `(lcn << lclusterbits)` to be truncated
at 4 GiB.
In order to consolidate the logic, just use `u64` consistently
around the codebase.
[1] https://sashiko.dev/r/20260420034612.1899973-1-hsiangkao%40linux.alibaba.com
Fixes: 152a333a58 ("staging: erofs: add compacted compression indexes support")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
On 32-bit platforms, pgoff_t is 32 bits wide, so left-shifting
large arbitrary pgoff_t values by PAGE_SHIFT performs 32-bit arithmetic
and silently truncates the result for pages beyond the 4 GiB boundary.
Cast the page index to loff_t before shifting to produce a correct
64-bit byte offset.
Fixes: 386292919c ("erofs: introduce readmore decompression strategy")
Fixes: 307210c262 ("erofs: verify metadata accesses for file-backed mounts")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Currently we already have boundary-checks for nameoffs, but the trailing
dirents are special since the namelens are calculated with strnlen()
with unchecked nameoffs.
If a crafted EROFS has a trailing dirent with nameoff >= maxsize,
maxsize - nameoff can underflow, causing strnlen() to read past the
directory block.
nameoff0 should also be verified to be a multiple of
`sizeof(struct erofs_dirent)` as well [1].
[1] https://sashiko.dev/#/patchset/20260416063511.3173774-1-hsiangkao%40linux.alibaba.com
Fixes: 3aa8ec716e ("staging: erofs: add directory operations")
Fixes: 33bac91284 ("staging: erofs: keep corrupted fs from crashing kernel in erofs_readdir()")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Closes: https://lore.kernel.org/r/A0FD7E0F-7558-49B0-8BC8-EB1ECDB2479A@outlook.com
Cc: stable@vger.kernel.org
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
slhc_uncompress() parses a VJ-compressed TCP header by advancing a
pointer through the packet via decode() and pull16(). Neither helper
bounds-checks against isize, and decode() masks its return with
& 0xffff so it can never return the -1 that callers test for -- those
error paths are dead code.
A short compressed frame whose change byte requests optional fields
lets decode() read past the end of the packet. The over-read bytes
are folded into the cached cstate and reflected into subsequent
reconstructed packets.
Make decode() and pull16() take the packet end pointer and return -1
when exhausted. Add a bounds check before the TCP-checksum read.
The existing == -1 tests now do what they were always meant to.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20260414134126.758795-2-horms@kernel.org/
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260416100147.531855-5-bestswngs@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The POD HD PRO is the rackmount version of the POD 500, with most of the
same behaviors. As with some of the other rackmount POD devices it will
not send captured audio to the host unless the host is sending playback
audio, so it has LINE6_CAP_IN_NEEDS_OUT in addition to the POD 500
flags.
Tested-By: Phil Willoughby <willerz@gmail.com>
Signed-off-by: Phil Willoughby <willerz@gmail.com>
Link: https://patch.msgid.link/20260420152405.7230-1-willerz@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
slhc_init() accepts rslots == 0 as a valid configuration, with the
documented meaning of 'no receive compression'. In that case the
allocation loop in slhc_init() is skipped, so comp->rstate stays
NULL and comp->rslot_limit stays 0 (from the kzalloc of struct
slcompress).
The receive helpers do not defend against that configuration.
slhc_uncompress() dereferences comp->rstate[x] when the VJ header
carries an explicit connection ID, and slhc_remember() later assigns
cs = &comp->rstate[...] after only comparing the packet's slot number
to comp->rslot_limit. Because rslot_limit is 0, slot 0 passes the
range check, and the code dereferences a NULL rstate.
The configuration is reachable in-tree through PPP. PPPIOCSMAXCID
stores its argument in a signed int, and (val >> 16) uses arithmetic
shift. Passing 0xffff0000 therefore sign-extends to -1, so val2 + 1
is 0 and ppp_generic.c ends up calling slhc_init(0, 1). Because
/dev/ppp open is gated by ns_capable(CAP_NET_ADMIN), the whole path
is reachable from an unprivileged user namespace. Once the malformed
VJ state is installed, any inbound VJ-compressed or VJ-uncompressed
frame that selects slot 0 crashes the kernel in softirq context:
Oops: general protection fault, probably for non-canonical
address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:slhc_uncompress (drivers/net/slip/slhc.c:519)
Call Trace:
<TASK>
ppp_receive_nonmp_frame (drivers/net/ppp/ppp_generic.c:2466)
ppp_input (drivers/net/ppp/ppp_generic.c:2359)
ppp_async_process (drivers/net/ppp/ppp_async.c:492)
tasklet_action_common (kernel/softirq.c:926)
handle_softirqs (kernel/softirq.c:623)
run_ksoftirqd (kernel/softirq.c:1055)
smpboot_thread_fn (kernel/smpboot.c:160)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:164)
</TASK>
Reject the receive side on such instances instead of touching rstate.
slhc_uncompress() falls through to its existing 'bad' label, which
bumps sls_i_error and enters the toss state. slhc_remember() mirrors
that with an explicit sls_i_error increment followed by slhc_toss();
the sls_i_runt counter is not used here because a missing rstate is
an internal configuration state, not a runt packet.
The transmit path is unaffected: the only in-tree caller that picks
rslots from userspace (ppp_generic.c) still supplies tslots >= 1, and
slip.c always calls slhc_init(16, 16), so comp->tstate remains valid
and slhc_compress() continues to work.
Fixes: 4ab42d78e3 ("ppp, slip: Validate VJ compression slot parameters completely")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260415204130.258866-2-bestswngs@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Inserts past 75% load call schedule_work(&ht->run_work) to kick an
async resize. If a caller holds a raw spinlock (e.g. an
insecure_elasticity user), schedule_work() under that lock records
caller_lock -> pool->lock -> pi_lock -> rq->__lock
A cycle forms if any of these locks is acquired in the reverse
direction elsewhere. sched_ext, the only current insecure_elasticity
user, hits this: it holds scx_sched_lock across rhashtable inserts of
sub-schedulers, while scx_bypass() takes rq->__lock -> scx_sched_lock.
Exercising the resize path produces:
Chain exists of:
&pool->lock --> &rq->__lock --> scx_sched_lock
Bounce the kick from the insert paths through irq_work so
schedule_work() runs from hard IRQ context with the caller's lock no
longer held. rht_deferred_worker()'s self-rearm on error stays on
schedule_work(&ht->run_work) - the worker runs in process context with
no caller lock held, and keeping the self-requeue on @run_work lets
cancel_work_sync() in rhashtable_free_and_destroy() drain it.
v3: Keep rht_deferred_worker()'s self-rearm on schedule_work(&run_work).
Routing it through irq_work in v2 broke cancel_work_sync()'s
self-requeue handling - an irq_work queued after irq_work_sync()
returned but while cancel_work_sync() was still waiting could fire
post-teardown.
v2: Bounce unconditionally instead of gating on insecure_elasticity,
as suggested by Herbert.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
In prep_ata_v3_hw(), add cpu_to_le32() to fix warning:
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c:1448:26: sparse: sparse: invalid assignment: |=
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c:1448:26: sparse: left side has type restricted __le32
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c:1448:26: sparse: right side has type unsigned int
Fixes: 8aa580cd92 ("scsi: hisi_sas: Enable force phy when SATA disk directly connected")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202604191850.IVYPTaML-lkp@intel.com/
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Link: https://patch.msgid.link/20260420021044.3339459-1-liyihang9@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The ALUA handler maps a 0 value (no implicit transition timeout provided
by the target) to the ALUA_FAILOVER_TIMEOUT constant, currently 60
seconds. This means the kernel already does not accept an infinite
transition time.
However, 60 seconds is insufficient for some arrays that may take longer
to complete ALUA transitions. Since the highest value allowed by the
SCSI specification for the implicit transition timeout is a single byte
(255 seconds), change the default to 255. This way, when a target does
not provide an explicit transition timeout, we default to the maximum
value the spec allows rather than an arbitrary 60 second limit.
Co-developed-by: Krishna Kant <krishna.kant@purestorage.com>
Signed-off-by: Krishna Kant <krishna.kant@purestorage.com>
Co-developed-by: Riya Savla <rsavla@purestorage.com>
Signed-off-by: Riya Savla <rsavla@purestorage.com>
Signed-off-by: Brian Bunker <brian@purestorage.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20260416165512.26497-2-brian@purestorage.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On systems with multiple controllers debug kernel shows
WARNING: possible recursive locking detected
during shutdown.
Each controller does have its own ctrl_info (and mutex) and that isn't
correctly recognized by debug kernel. Suppress the warning by releasing
the mutex at the end of pqi_shutdown().
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Don Brace <don.brace@microchip.com>
Link: https://patch.msgid.link/20260414124118.23661-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
sg_start_req() is called from normal user context and can sleep when
waiting for memory. Switch it to use GFP_KERNEL, which fixes allocation
failures seen with the bio_alloc rework.
Fixes: b520c4eef8 ("block: split bio_alloc_bioset more clearly into a fast and slowpath")
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260415060813.807659-2-hch@lst.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
submit_one_async_extent() calls btrfs_reserve_extent(), which decrements
bytes_may_use. If the call btrfs_create_io_em() fails, we jump to
out_free_reserve, which calls extent_clear_unlock_delalloc().
Because we're specifying EXTENT_DO_ACCOUNTING, i.e.
EXTENT_CLEAR_META_RESV | EXTENT_CLEAR_DATA_RESV, this decreases
bytes_may_use again. This can lead to problems later on, as an initial
write can fail only for the writeback to silently ENOSPC.
Fix this by replacing EXTENT_DO_ACCOUNTING with EXTENT_CLEAR_META_RESV.
This parallels a4fe134fc1 ("btrfs: fix a double release on reserved
extents in cow_one_range()"), which is the same fix in cow_one_range().
Fixes: 151a41bc46 ("Btrfs: fix what bits we clear when erroring out from delalloc")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_partially_delete_raid_extent() returns an error code (e.g.
-ENOMEM from kzalloc(), or errors from btrfs_del_item/btrfs_insert_item()),
but all three call sites in btrfs_delete_raid_extent() discard the
return value, silently losing errors and potentially leaving the stripe
tree in an inconsistent state.
Fix by capturing the return value into ret at all three call sites and
breaking out of the loop on error where appropriate.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: robbieko <robbieko@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the 'punch a hole' case of btrfs_delete_raid_extent(),
btrfs_duplicate_item() can return -EAGAIN when the leaf needs to be
split and the path becomes invalid. The old code treats any error as
fatal and breaks out of the loop.
Additionally, btrfs_duplicate_item() may trigger setup_leaf_for_split()
which can reallocate the leaf node. The code continues using the old
leaf pointer, leading to use-after-free or stale data access.
Fix both issues by:
- Handling -EAGAIN specifically: release the path and retry the loop.
- Refreshing leaf = path->nodes[0] after successful duplication.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: robbieko <robbieko@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After falling back to the previous item in btrfs_delete_raid_extent(),
the code uses ASSERT(found_start <= start) to verify the found extent
actually precedes our target range. If the B-tree state is unexpected
(e.g. no overlapping extent exists), this triggers a kernel BUG/panic
in debug builds, or silently continues with wrong data otherwise.
Replace the ASSERT with a proper bounds check that returns -ENOENT if
the found extent does not actually overlap with the start position.
Signed-off-by: robbieko <robbieko@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When found_start > start and slot == 0, btrfs_previous_item() is called
with min_objectid=start to find the previous stripe extent. However, the
previous stripe extent we are looking for has objectid < start (it starts
before our deletion range), so passing start as min_objectid prevents
finding it.
Fix by passing 0 as min_objectid to allow finding any preceding stripe
extent regardless of its objectid.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: robbieko <robbieko@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_delete_raid_extent(), the search key uses offset=0. When the
target stripe entry is the first item on a leaf, btrfs_search_slot()
may land on the previous leaf and decrementing the slot from nritems
still points to the wrong entry, causing the stripe extent to be
silently missed.
Fix this by searching with offset=(u64)-1 instead. Since no real stripe
entry has this offset, btrfs_search_slot() always returns 1 with the
slot pointing past the last matching objectid entry. Then unconditionally
decrement the slot with a proper slots[0]==0 early-exit check to handle
the case where no matching entry exists.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: robbieko <robbieko@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When btrfs_partially_delete_raid_extent() rebuilds a truncated/shifted
stripe extent into newitem, the loop copies the physical address for
each stride but forgets to copy the devid. The resulting item written
back to the stripe tree has zeroed-out devids, corrupting the stripe
mapping.
Fix this by reading the devid with btrfs_raid_stride_devid() and
writing it into the new item with btrfs_set_stack_raid_stride_devid()
before copying the physical address.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: robbieko <robbieko@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace the conditional assertions with proper error handling and
transaction abort if we find an unexpected key type in the free space
tree.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In add_remap_tree_entries(), we only process a certain number of entries
at a time, meaning we may need to loop.
But because we weren't checking the return value of btrfs_insert_empty_items()
within the loop, this meant that if the last iteration of the loop
succeeded but a previous iteration failed, we were erroneously returning
0.
Fix this by breaking the loop early if btrfs_insert_empty_items() fails.
Fixes: b56f35560b ("btrfs: handle setting up relocation of block group with remap-tree")
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Although commit 304076527c ("btrfs: move shutdown and remove_bdev
callbacks out of experimental features") tries to move both shutdown and
remove_bdev out of experimental features, that commit has only addressed
the super block operation callback, the ioctl one is left untouched.
Fix that missing aspect by also moving shutdown ioctl out of
experimental features.
Since we're here, also add unknown flag detection to reject any
unsupported shutdown flags.
Fixes: 304076527c ("btrfs: move shutdown and remove_bdev callbacks out of experimental features")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently for tree block readahead we never pass a
btrfs_tree_parent_check with @has_first_key set.
Without @has_first_key set, btrfs will skip the following extra
checks:
- Header generation check
This is a minor one.
- Empty leaf/node checks
This is more serious, for certain trees like the csum tree, they are
allowed to be empty, thus an empty leaf can pass the tree checker.
But if there is a parent node for such an empty leaf, it indicates
corruption.
Without @has_first_key set, we can no longer detect such a problem.
In fact there is already a fuzzed image report that a corrupted csum
leaf which has zero nritems but still has a parent node can trigger
a BUG_ON() during csum deletion.
However there are only two call sites of btrfs_readahead_tree_block():
- Inside relocate_tree_blocks()
At this call site we are trying to grab the first key of the tree
block, thus we are not able to pass a @first_key parameter.
- Inside btrfs_readahead_node_child()
This is the more common call site, where we have the parent node and
want to readahead the child tree blocks.
In this case we can easily grab the node key and pass it for checks.
Add a new parameter @first_key to btrfs_readahead_tree_block() and pass
the node key to it inside btrfs_readahead_node_child().
This should plug the gap in empty leaf detection during readahead.
Link: https://lore.kernel.org/linux-btrfs/20260409071255.3358044-1-gality369@gmail.com/
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If one of the calls made by do_remap_reloc_trans() fails, we can leave
the remap tree in an inconsistent state. Abort the transaction if this
happens, to prevent the corrupt state from reaching the disk.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If the call to btrfs_reserve_extent() in do_remap_reloc_trans() returns
a smaller extent than we asked for, currently we're not undoing the
bytes_may_use change that we made. Fix this by calling
btrfs_space_info_update_bytes_may_use() again for the difference.
Fixes: fd6594b144 ("btrfs: replace identity remaps with actual remaps when doing relocations")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If the call to btrfs_reserve_extent() in move_existing_remap() returns a
smaller extent than we asked for, currently we're not undoing the
bytes_may_use change that we made. Fix this by calling
btrfs_space_info_update_bytes_may_use() again for the difference.
Fixes: bbea42dfb9 ("btrfs: move existing remaps before relocating block group")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This odd file was added to automatically figure out tool-generated
symbols.
Honestly, it *should* have been just a real honest-to-goodness regular
file in git, instead of having strange code to generate it in the
Makefile, but that is not how that silly thing works. So now we need to
ignore it explicitly.
Fixes: 1211907ac0 ("tracing: Generate undef symbols allowlist for simple_ring_buffer")
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes regressions in non-bash shells and busybox support, and reverts
a commit that regression in build and installation when one or more
tests fail to build. Fixes duplicated test number reporting introduced
in ktap support patch.
- selftests: Fix duplicated test number reporting
- selftests: Fix runner.sh for non-bash shells
- selftests: Fix runner.sh busybox support
- selftests: Deescalate error reporting
-----BEGIN PGP SIGNATURE-----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=1k+f
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-next-7.1-next-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fix regressions in non-bash shells and busybox support, and revert a
commit that regressed in build and installation when one or more tests
fail to build.
Fix duplicated test number reporting introduced in ktap support patch"
* tag 'linux_kselftest-next-7.1-next-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: Fix duplicated test number reporting
selftests: Fix runner.sh for non-bash shells
selftests: Fix runner.sh busybox support
selftests: Deescalate error reporting
Core features:
- Add workaround for C1-Pro erratum 4193714 - early CME (SME unit)
DVMSync acknowledgement. The fix consists of sending IPIs on TLB
maintenance to those CPUs running in user space with SME enabled
- Include kernel-hwcap.h in list of generated files (missed in a recent
commit generating the KERNEL_HWCAP_* macros)
CCA:
- Fix RSI_INCOMPLETE error check in arm-cca-guest
MPAM:
- Fix an unmount->remount problem with the CDP emulation, uninitialised
variable and checker warnings
-----BEGIN PGP SIGNATURE-----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=LNY2
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull more arm64 updates from Catalin Marinas:
"The main 'feature' is a workaround for C1-Pro erratum 4193714
requiring IPIs during TLB maintenance if a process is running in user
space with SME enabled.
The hardware acknowledges the DVMSync messages before completing
in-flight SME accesses, with security implications. The workaround
makes use of the mm_cpumask() to track the cores that need
interrupting (arm64 hasn't used this mask before).
The rest are fixes for MPAM, CCA and generated header that turned up
during the merging window or shortly before.
Summary:
Core features:
- Add workaround for C1-Pro erratum 4193714 - early CME (SME unit)
DVMSync acknowledgement. The fix consists of sending IPIs on TLB
maintenance to those CPUs running in user space with SME enabled
- Include kernel-hwcap.h in list of generated files (missed in a
recent commit generating the KERNEL_HWCAP_* macros)
CCA:
- Fix RSI_INCOMPLETE error check in arm-cca-guest
MPAM:
- Fix an unmount->remount problem with the CDP emulation,
uninitialised variable and checker warnings"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm_mpam: resctrl: Make resctrl_mon_ctx_waiters static
arm_mpam: resctrl: Fix the check for no monitor components found
arm_mpam: resctrl: Fix MBA CDP alloc_capable handling on unmount
virt: arm-cca-guest: fix error check for RSI_INCOMPLETE
arm64/hwcap: Include kernel-hwcap.h in list of generated files
arm64: errata: Work around early CME DVMSync acknowledgement
arm64: cputype: Add C1-Pro definitions
arm64: tlb: Pass the corresponding mm to __tlbi_sync_s1ish()
arm64: tlb: Introduce __tlbi_sync_s1ish_{kernel,batch}() for TLB maintenance
- sh: Drop CONFIG_FIRMWARE_EDID from defconfig files
- sh: Remove CONFIG_VSYSCALL reference from UAPI
- sh: Fix typo in SPDX license ID lines
- sh: Include <linux/io.h> in dac.h
-----BEGIN PGP SIGNATURE-----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=jFKW
-----END PGP SIGNATURE-----
Merge tag 'sh-for-v7.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"Two patches from Thomas Zimmermann, one by Tim Bird and one by Thomas
Weißschuh.
The first patch by Thomas Zimmermann adds a missing include in dac.h
for SH-3 which became necessary after 243ce64b2b ("backlight: Do not
include <linux/fb.h> in header file") which made __raw_readb() and
__raw_writeb() inaccessible in dac.h.
Thomas' second patch drops CONFIG_FIRMWARE_EDID for SH as it depends
on X86 or EFI_GENERIC_STUB which are not defined on SH for obvious
reasons.
The patch by Tim Bird fixes just a small typo in two SPDX ID lines
which he stumbled over by accident.
And, least but not last, the patch by Thomas Weißschuh removes the
CONFIG_VSYSCALL reference from UAPI. This was necessary as the
definition of AT_SYSINFO_EHDR was gated between CONFIG_VSYSCALL to
avoid a default gate VMA to be created. However that default gate VMA
was removed entirely in commit a6c19dfe39 (arm64,ia64,ppc,s390,
sh,tile,um,x86,mm: remove default gate area)"
* tag 'sh-for-v7.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: Drop CONFIG_FIRMWARE_EDID from defconfig files
sh: Remove CONFIG_VSYSCALL reference from UAPI
sh: Fix typo in SPDX license ID lines
sh: Include <linux/io.h> in dac.h
