Pull sparc64 csum fix from Al Viro:
"Fix for a brown paperbag regression in sparc64"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
[regression fix] really dumb fuckup in sparc64 __csum_partial_copy() changes
Joakim Zhang says:
====================
patches for stmmac
A patch set for stmmac, fix some driver issues.
ChangeLogs:
V1->V2:
* add Fixes tag.
* add patch 5/5 into this patch set.
V2->V3:
* rebase to latest net tree where fixes go.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The current IP register MAC_HW_Feature1[ADDR64] only defines
32/40/64 bit width, but some SOCs support others like i.MX8MP
support 34 bits but it maps to 40 bits width in MAC_HW_Feature1[ADDR64].
So overwrite dma_cap.addr64 according to HW real design.
Fixes: 94abdad697 ("net: ethernet: dwmac: add ethernet glue logic for NXP imx8 chip")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There have chance to re-enable the eee_ctrl_timer and fire the timer
in napi callback after delete the timer in .stmmac_release(), which
introduces to access eee registers in the timer function after clocks
are disabled then causes system hang. Found this issue when do
suspend/resume and reboot stress test.
It is safe to delete the timer after napi disabled and disable lpi mode.
Fixes: d765955d2a ("stmmac: add the Energy Efficient Ethernet support")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Start phylink instance and resume back the PHY to supply
RX clock to MAC before MAC layer initialization by calling
.stmmac_hw_setup(), since DMA reset depends on the RX clock,
otherwise DMA reset cost maximum timeout value then finally
timeout.
Fixes: 74371272f9 ("net: stmmac: Convert to phylink and remove phylib logic")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current timeout value is not enough for gmac5 dma reset
on imx8mp platform, increase the timeout range.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
~0U is -1, not 1
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Fixes: fdf8bee96f "sparc64: propagate the calling convention changes down to __csum_partial_copy_...()"
X-brown-paperbag: yes
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add an explicit comment in the code to describe the indirect
serialization of the holders of the commit_mutex with the rtnl_mutex.
Commit 90d2723c6d ("netfilter: nf_tables: do not hold reference on
netdevice from preparation phase") already describes this, but a comment
in this case is better for reference.
Reported-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull seq_file fix from Al Viro:
"This fixes a regression introduced in this cycle wrt iov_iter based
variant for reading a seq_file"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix return values of seq_read_iter()
Use nf_msecs_to_jiffies64 and nf_jiffies64_to_msecs as provided by
8e1102d5a1 ("netfilter: nf_tables: support timeouts larger than 23
days"), otherwise ruleset listing breaks.
Fixes: a8b1e36d0d ("netfilter: nft_dynset: fix element timeout for HZ != 1000")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Don't try to adjust XFRM support flags if the bond device isn't yet
registered. Bad things can currently happen when netdev_change_features()
is called without having wanted_features fully filled in yet. This code
runs both on post-module-load mode changes, as well as at module init
time, and when run at module init time, it is before register_netdevice()
has been called and filled in wanted_features. The empty wanted_features
led to features also getting emptied out, which was definitely not the
intended behavior, so prevent that from happening.
Originally, I'd hoped to stop adjusting wanted_features at all in the
bonding driver, as it's documented as being something only the network
core should touch, but we actually do need to do this to properly update
both the features and wanted_features fields when changing the bond type,
or we get to a situation where ethtool sees:
esp-hw-offload: off [requested on]
I do think we should be using netdev_update_features instead of
netdev_change_features here though, so we only send notifiers when the
features actually changed.
Fixes: a3b658cfb6 ("bonding: allow xfrm offload setup post-module-load")
Reported-by: Ivan Vecera <ivecera@redhat.com>
Suggested-by: Ivan Vecera <ivecera@redhat.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Link: https://lore.kernel.org/r/20201205172229.576587-1-jarod@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Coverity reported:
Useless call (USELESS_CALL) side_effect_free: Calling
SiS_GetResInfo(SiS_Pr, ModeNo, ModeIdIndex) is only useful for its
return value, which is ignored.
And this is correct - so drop the call.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Useless call")
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20201206190247.1861316-14-sam@ravnborg.org
The controlfb driver has a number of dummy defines for IO operations.
They were introduced in commit a07a63b0e2
("video: fbdev: controlfb: add COMPILE_TEST support").
The write variants did not use their value parameter in the
dummy versions, resulting in set but not used warnings.
Fix this by adding "(void)val" to silence the compiler.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20201206190247.1861316-13-sam@ravnborg.org
The goldfish_fb_acpi_match table is only used with ACPI enabled.
Ifdef it out unless it is needed.
This is a similar fix to what other acpi drivers do.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201206190247.1861316-10-sam@ravnborg.org
Add missing parameter and drop parameter that is not present
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201206190247.1861316-8-sam@ravnborg.org
Fix a few W=1 warnings about unused assignments.
Drop the unused error code.
v2:
- Subject updated (Lee)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Qilong Zhang <zhangqilong3@huawei.com>
Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lee Jones <lee.jones@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201206190247.1861316-4-sam@ravnborg.org
Fix kernel-doc warnings reported when using W=1
v2:
- Improve subject (Lee)
v3:
- Add RETURNS documentation (Thomas)
v4:
- Use Return: not RETURNS (Randy)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201206205132.GA1869030@ravnborg.org
In case of having so many PID results that they don't fit into a singe page
(4096) bytes, bpftool will erroneously conclude that it got corrupted data due
to 4096 not being a multiple of struct pid_iter_entry, so the last entry will
be partially truncated. Fix this by sizing the buffer to fit exactly N entries
with no truncation in the middle of record.
Fixes: d53dee3fe0 ("tools/bpftool: Show info for processes holding BPF map/prog/link/btf FDs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201204232002.3589803-1-andrii@kernel.org
We checked the table size against a hardcoded number of entries, and
that number was excluding the special mocs registers at the end.
Fixes: 777a7717d6 ("drm/i915/gt: Program mocs:63 for cache eviction on gen9")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.3+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127102540.13117-1-chris@chris-wilson.co.uk
(cherry picked from commit 444fbf5d70)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[backported and updated the Fixes sha]
This patch fixes the slice count computation algorithm
for calculating the slice count based on Peak pixel rate
and the max slice width allowed on the DSC engines.
We need to ensure slice count > min slice count req
as per DP spec based on peak pixel rate and that it is
greater than min slice count based on the max slice width
advertised by DPCD. So use max of these two.
In the prev patch we were using min of these 2 causing it
to violate the max slice width limitation causing a blank
screen on 8K@60.
Fixes: d9218c8f6c ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v5.0+
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204205804.25225-1-manasi.d.navare@intel.com
(cherry picked from commit d371d6ea92)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently the check that the unsigned size_t variable i is >= 0
is always true because the unsigned variable will never be negative,
causing the loop to run forever. Fix this by changing the
pre-decrement check to a zero check on i followed by a decrement of i.
Addresses-Coverity: ("Unsigned compared against 0")
Fixes: bfed6708d6 ("drm/i915: use vmap in shmem_pin_map")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002170354.94627-1-colin.king@canonical.com
(cherry picked from commit e70956a249)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We currently presume that the engine reset is successful, cancelling the
expired preemption timer in the process. However, engine resets can
fail, leaving the timeout still pending and we will then respond to the
timeout again next time the tasklet fires. What we want is for the
failed engine reset to be promoted to a full device reset, which is
kicked by the heartbeat once the engine stops processing events.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1168
Fixes: 3a7a92aba8 ("drm/i915/execlists: Force preemption")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151234.19729-2-chris@chris-wilson.co.uk
(cherry picked from commit d997e240ce)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Before reseting the engine, we suspend the execution of the guilty
request, so that we can continue execution with a new context while we
slowly compress the captured error state for the guilty context. However,
if the reset fails, we will promptly attempt to reset the same request
again, and discover the ongoing capture. Ignore the second attempt to
suspend and capture the same request.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1168
Fixes: 32ff621fd7 ("drm/i915/gt: Allow temporary suspension of inflight requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151234.19729-1-chris@chris-wilson.co.uk
(cherry picked from commit b969540500)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In the course of discovering and closing many races with context closure
and execbuf submission, since commit 61231f6bd0 ("drm/i915/gem: Check
that the context wasn't closed during setup") we started checking that
the context was not closed by another userspace thread during the execbuf
ioctl. In doing so we cancelled the inflight request (by telling it to be
skipped), but kept reporting success since we do submit a request, albeit
one that doesn't execute. As the error is known before we return from the
ioctl, we can report the error we detect immediately, rather than leave
it on the fence status. With the immediate propagation of the error, it
is easier for userspace to handle.
Fixes: 61231f6bd0 ("drm/i915/gem: Check that the context wasn't closed during setup")
Testcase: igt/gem_ctx_exec/basic-close-race
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201203103432.31526-1-chris@chris-wilson.co.uk
(cherry picked from commit ba38b79eae)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
There is a copy and paste bug in this code. It's supposed to check
"obj2" instead of checking "obj" a second time.
Fixes: 80f0b679d6 ("drm/i915: Add an implementation for i915_gem_ww_ctx locking, v2.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/8ilneOcJAjwqU4t@mwand
(cherry picked from commit 14f2d7604f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add support for 24-bit panels that are connected through a 8-bit bus and
use delta-RGB, which means a RGB pixel ordering on odd lines, and a GBR
pixel ordering on even lines.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201119155559.14112-4-paul@crapouillou.net
The LCD controller expects timing values in dot-clock ticks, which is 3x
the timing values in pixels when using a 3x8-bit display; but it will
count the display area size in pixels either way. Go figure.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201119155559.14112-3-paul@crapouillou.net
The job done callback is called from various
places, in two ways: in job done role, and
as a fence callback role.
Essentialize the callback to an atom
function to just complete the job,
and into a second function as a prototype
of fence callback which calls to complete
the job.
This is used in latter patches by the completion
code.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/405574/
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Christian König <christian.koenig@amd.com>
Rename "ring_mirror_list" to "pending_list",
to describe what something is, not what it does,
how it's used, or how the hardware implements it.
This also abstracts the actual hardware
implementation, i.e. how the low-level driver
communicates with the device it drives, ring, CAM,
etc., shouldn't be exposed to DRM.
The pending_list keeps jobs submitted, which are
out of our control. Usually this means they are
pending execution status in hardware, but the
latter definition is a more general (inclusive)
definition.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/405573/
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Christian König <christian.koenig@amd.com>
Rename "node" to "list" in struct drm_sched_job,
in order to make it consistent with what we see
being used throughout gpu_scheduler.h, for
instance in struct drm_sched_entity, as well as
the rest of DRM and the kernel.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/403515/
Cc: Alexander Deucher <Alexander.Deucher@amd.com>
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Christian König <christian.koenig@amd.com>
When running concurrent iptables rules replacement with data, the per CPU
sequence count is checked after the assignment of the new information.
The sequence count is used to synchronize with the packet path without the
use of any explicit locking. If there are any packets in the packet path using
the table information, the sequence count is incremented to an odd value and
is incremented to an even after the packet process completion.
The new table value assignment is followed by a write memory barrier so every
CPU should see the latest value. If the packet path has started with the old
table information, the sequence counter will be odd and the iptables
replacement will wait till the sequence count is even prior to freeing the
old table info.
However, this assumes that the new table information assignment and the memory
barrier is actually executed prior to the counter check in the replacement
thread. If CPU decides to execute the assignment later as there is no user of
the table information prior to the sequence check, the packet path in another
CPU may use the old table information. The replacement thread would then free
the table information under it leading to a use after free in the packet
processing context-
Unable to handle kernel NULL pointer dereference at virtual
address 000000000000008e
pc : ip6t_do_table+0x5d0/0x89c
lr : ip6t_do_table+0x5b8/0x89c
ip6t_do_table+0x5d0/0x89c
ip6table_filter_hook+0x24/0x30
nf_hook_slow+0x84/0x120
ip6_input+0x74/0xe0
ip6_rcv_finish+0x7c/0x128
ipv6_rcv+0xac/0xe4
__netif_receive_skb+0x84/0x17c
process_backlog+0x15c/0x1b8
napi_poll+0x88/0x284
net_rx_action+0xbc/0x23c
__do_softirq+0x20c/0x48c
This could be fixed by forcing instruction order after the new table
information assignment or by switching to RCU for the synchronization.
Fixes: 80055dab5d ("netfilter: x_tables: make xt_replace_table wait until old rules are not used anymore")
Reported-by: Sean Tranchetti <stranche@codeaurora.org>
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add DP support to display-connector driver. The driver will support HPD
via a GPIO and DP PWR.
DP PWR will be enabled at probe, which is not optimal, but I'm not sure
what would be a good place to enable and disable DP PWR. Perhaps
attach/detach, but I don't know if enabling HW is something that attach
is supposed to do.
In any case, I don't think there's much difference in power consumption
between the version in this patch and enabling the regulator later: if
the driver probes, supposedly it will attach very soon afterwards, and
we need to enable the DP PWR as soon as possible.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130112919.241054-3-tomi.valkeinen@ti.com
Add binding for DisplayPort connector. A few notes:
* Similar to hdmi-connector, it has hpd-gpios as an optional property,
as the HPD could also be handled by, e.g., the DP bridge.
* dp-pwr-supply, which provides 3.3V on DP_PWR pin, is optional, as it
is not strictly required: standard DP cables do not even have the pin
connected.
* Connector type. Full size and mini connectors are identical except for
the connector size and form, so I believe there is no functional need
for this property. But similar to 'label' property, it might be used
to present information about the connector to the userspace.
* No eDP. There's really no "eDP connector", as it's always a custom
made connection between the DP and the DP panel, although the eDP spec
does offer a few suggested pin setups. So possibly there is no need for
edp-connector binding, but even if there is, I don't want to guess what
it could look like, and could it be part of the dp-connector binding.
* No DP++. I'm not familiar with DP++. DP++ might need an i2c bus added
to the bindings.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130112919.241054-2-tomi.valkeinen@ti.com
