Revert commit c7f26ccfb2 ("mm/vmstat.c: fix vmstat_update() preemption
BUG"). Steven saw a "using smp_processor_id() in preemptible" message
and added a preempt_disable() section around it to keep it quiet. This
is not the right thing to do it does not fix the real problem.
vmstat_update() is invoked by a kworker on a specific CPU. This worker
it bound to this CPU. The name of the worker was "kworker/1:1" so it
should have been a worker which was bound to CPU1. A worker which can
run on any CPU would have a `u' before the first digit.
smp_processor_id() can be used in a preempt-enabled region as long as
the task is bound to a single CPU which is the case here. If it could
run on an arbitrary CPU then this is the problem we have an should seek
to resolve.
Not only this smp_processor_id() must not be migrated to another CPU but
also refresh_cpu_vm_stats() which might access wrong per-CPU variables.
Not to mention that other code relies on the fact that such a worker
runs on one specific CPU only.
Therefore revert that commit and we should look instead what broke the
affinity mask of the kworker.
Link: http://lkml.kernel.org/r/20180504104451.20278-1-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven J. Hill <steven.hill@cavium.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In commit 804209d8a0 ("lib/percpu_ida.c: use _irqsave() instead of
local_irq_save() + spin_lock") I inlined alloc_local_tag() and mixed up
the >= check from percpu_ida_alloc() with the one in alloc_local_tag().
Don't alloc from per-CPU freelist if ->nr_free is zero.
Link: http://lkml.kernel.org/r/20180613075830.c3zeva52fuj6fxxv@linutronix.de
Fixes: 804209d8a0 ("lib/percpu_ida.c: use _irqsave() instead of local_irq_save() + spin_lock")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reported-by: David Disseldorp <ddiss@suse.de>
Tested-by: David Disseldorp <ddiss@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Shaohua Li <shli@fb.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The poll() changes were not well thought out, and completely
unexplained. They also caused a huge performance regression, because
"->poll()" was no longer a trivial file operation that just called down
to the underlying file operations, but instead did at least two indirect
calls.
Indirect calls are sadly slow now with the Spectre mitigation, but the
performance problem could at least be largely mitigated by changing the
"->get_poll_head()" operation to just have a per-file-descriptor pointer
to the poll head instead. That gets rid of one of the new indirections.
But that doesn't fix the new complexity that is completely unwarranted
for the regular case. The (undocumented) reason for the poll() changes
was some alleged AIO poll race fixing, but we don't make the common case
slower and more complex for some uncommon special case, so this all
really needs way more explanations and most likely a fundamental
redesign.
[ This revert is a revert of about 30 different commits, not reverted
individually because that would just be unnecessarily messy - Linus ]
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618110154.30462-6-tdz@users.sourceforge.net
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618110154.30462-5-tdz@users.sourceforge.net
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618110154.30462-4-tdz@users.sourceforge.net
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618110154.30462-3-tdz@users.sourceforge.net
This patch unifies the naming of DRM functions for reference counting
of struct drm_connector. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tdz@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618110154.30462-2-tdz@users.sourceforge.net
Devices with slow interrupt handlers are significantly harming
performance when their interrupt vector is shared with a fast device.
Create a class code white list for devices with known fast interrupt
handlers and let all other devices share a single vector so that they
don't interfere with performance.
At the moment, only the NVM Express class code is on the list, but more
may be added if VMD users desire to use other low-latency devices in
these domains.
Signed-off-by: Keith Busch <keith.busch@intel.com>
[lorenzo.pieralisi@arm.com: changelog]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Jon Derrick: <jonathan.derrick@intel.com>
These properties are required for compatibility with runtime PM.
Without these properties, MMC host controller will not be aware
of power capabilities. When the wlcore driver attempts to power
on the device, it will erroneously fail with -EACCES. This fixes
a regression found here: https://lkml.org/lkml/2018/6/12/930
Fixes: 60f36637bb ("wlcore: sdio: allow pm to handle sdio power")
Signed-off-by: Ryan Grachek <ryan@edited.us>
Tested-by: John Stultz <john.stultz@linaro.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Tested-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
These properties are required for compatibility with runtime PM.
Without these properties, MMC host controller will not be aware
of power capabilities. When the wlcore driver attempts to power
on the device, it will erroneously fail with -EACCES.
Fixes: 60f36637bb ("wlcore: sdio: allow pm to handle sdio power")
Signed-off-by: Ryan Grachek <ryan@edited.us>
Tested-by: John Stultz <john.stultz@linaro.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This patch avoids that removing a path controlled by the dm-mpath driver
while mkfs is running triggers the following kernel bug:
kernel BUG at block/blk-core.c:3347!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 20 PID: 24369 Comm: mkfs.ext4 Not tainted 4.18.0-rc1-dbg+ #2
RIP: 0010:blk_end_request_all+0x68/0x70
Call Trace:
<IRQ>
dm_softirq_done+0x326/0x3d0 [dm_mod]
blk_done_softirq+0x19b/0x1e0
__do_softirq+0x128/0x60d
irq_exit+0x100/0x110
smp_call_function_single_interrupt+0x90/0x330
call_function_single_interrupt+0xf/0x20
</IRQ>
Fixes: f9d03f96b9 ("block: improve handling of the magic discard payload")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Check the audit_enabled flag and bail immediately. This does not change
the functionality, but brings the code format in line with similar
checks in audit_tree_log_remove_rule(), audit_mark_log_rule_change(),
and elsewhere in the audit code.
See: https://github.com/linux-audit/audit-kernel/issues/50
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: tweaked subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Respect the audit_enabled flag when printing tree rule config change
records.
See: https://github.com/linux-audit/audit-kernel/issues/50
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: tweak the subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
I haven't seen any real SMP machine yet with > 4 CPUs (we don't suport
SuperDomes yet), so reducing the default maximum number of CPUs may speed up
various bitop functions which depend on number of CPUs in the system.
bload-o-meter on a typical 64-bit kernel shows:
Data: add/remove: 0/0 grow/shrink: 0/10 up/down: 0/-3724 (-3724)
Total: Before=1910404, After=1906680, chg -0.19%
Code: add/remove: 0/2 grow/shrink: 42/38 up/down: 2320/-3500 (-1180)
Total: Before=11053099, After=11051919, chg -0.01%
Signed-off-by: Helge Deller <deller@gmx.de>
Convert printk(KERN_LEVEL) type of calls to pr_lvl() macros.
While here,
- convert printk() to pr_info()
- join back string literal to be on one line
- use %*phN (note, it gives 1 byte more for sake of simplicity)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
A full boot only succeeds with 4kB page sizes currently.
For 16kB and 64kB page size support somone needs to fix the LBA PCI code
at least, so mark those broken for now.
Signed-off-by: Helge Deller <deller@gmx.de>
This header file isn't exported to userspace, so there is no benefit in
defining struct sigaction for userspace here.
Signed-off-by: Helge Deller <deller@gmx.de>
The current device-tree description of the SolidRun Armada 38x platforms
has been successfully tested with production systems.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Jon Nettleton <jon@solid-run.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The SolidRun Armada 388 SOM has the SPI flash populated by default
unless the customer explicitly asks otherwise. Enable support by
default.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The groups-related functions declared in include/linux/cred.h are
defined in kernel/groups.c, which is compiled only when
CONFIG_MULTIUSER=y. Move all these function declarations under #ifdef
CONFIG_MULTIUSER to help avoid accidental usage in contexts where
CONFIG_MULTIUSER might be disabled.
This patch also adds a fallback for groups_search(). Currently this
function is only called from kernel/groups.c itself and
security/keys/permissions.c, where the call is (by coincidence)
optimized away in case CONFIG_MULTIUSER=n. However, the audit subsystem
(which does not depend on CONFIG_MULTIUSER) calls this function in
-next, so the fallback will be needed to avoid compilation errors or
ugly workarounds.
See also:
https://lkml.org/lkml/2018/6/20/670https://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit.git/commit/?h=next&id=af85d1772e31fed34165a1b3decef340cf4080c0
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
If reconnect/reset failed where the controller async event buffer
was freed, we might end up freeing it again as we call
nvme_rdma_destroy_admin_queue again in the remove path. Given that
the sequence is guaranteed to serialize by .ctrl_stop, we simply
set ctrl->async_event_sqe.data to NULL and don't free it in future
visits.
Reported-by: Max Gurtovoy <maxg@mellanox.com>
Tested-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch adds the gpio-ranges and gpio-reserved-ranges property
definitions to the binding text files supported by the pinctrl-msm
driver framework.
gpio-ranges:
For DT-based platforms the pinctrl-msm framework currently relies
on the deprecated-for-DT gpiochip_add_pin_range() function to add
the range of GPIOs to be handled by the pin controller. Due to
interactions within gpiolib code, this causes the pinctrl-msm
driver to bail out (-517) during boot when a gpio-hog is declared.
This can be fatal and cause the system to not boot or reset
(for a detailed explanation and call-trace, refer to patch:
"pinctrl: msm: fix gpio-hog related boot issues" in this series).
gpio-reserved-ranges:
The binding has been added as a precaution since the TrustZone
firmware (aka QSEE), which is running as the hypervisor, might
have reserved certain, but undisclosed pins. Hence reading or
writing to the registers for those pins will cause an
XPU violation and this subsequently crashes the kernel.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fixes these warnings:
pinctrl-aspeed.c:112: warning: Function parameter or member 'map' not
described in 'aspeed_sig_desc_eval'
pinctrl-aspeed.c:112: warning: Excess function parameter 'regmap'
description in 'aspeed_sig_desc_eval'
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The driver missed the fact that PECI_SMB_DATA has moved from EAST
community 224 to 182 instead. Correct the pin ordering accordingly.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Make sure we initialize *bno and *len, before jumping to out_bad_rec
label, and risk calling xfs_warn() with uninitialized variables.
Coverity: 100898
Coverity: 1437081
Coverity: 1437129
Coverity: 1437191
Coverity: 1437201
Coverity: 1437212
Coverity: 1437341
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
If buf[-1] just happens to hold the byte 0x0A, then nread can wrap around
to (size_t)-1, leading to invalid memory accesses.
This has caused segmentation faults when trying to build the latest
kernel snapshots for i686 in Fedora:
https://bugzilla.redhat.com/show_bug.cgi?id=1592374
Signed-off-by: Jerry James <loganjerry@gmail.com>
[alexpl@fedoraproject.org: reformatted patch for submission]
Signed-off-by: Alexander Ploumistos <alexpl@fedoraproject.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit 5d20ee3192 ("kbuild: Allow LD_DEAD_CODE_DATA_ELIMINATION
to be selectable if enabled"), HAVE_LD_DEAD_CODE_DATA_ELIMINATION is
supposed to be selected by architectures that are capable of this
functionality. LD_DEAD_CODE_DATA_ELIMINATION is now users' selection.
Update the help message.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Each symbol has a property of type P_SYMBOL since commit
59e89e3ddf (kconfig: save location of config symbols).
Handle those properties in print_symbol().
Further, place a pointer to print_symbol() in the comment above the
list of known property type.
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Remove unrequired whitespace in some declarations,
fix an indentation and remove unrequired blank lines.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the mac_pton() helper to convert the mac address string.
The functions key_char2num() and key_2char2num() are not used
anywhere else and can be removed.
This also has the benefit of validating the input since mac_pton()
returns false if the string is not valid.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use ether_addr_copy() instead of memcpy() to copy the mac address.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using is_broadcast_ether_addr() and is_zero_ether_addr() instead of
testing each byte of the mac[] array for 0xff and 0x00 shortens the
code and improves readability.
If np == NULL, of_get_property() returns NULL, hence the "np" check
is not needed.
Instead of a fixed default mac address use a random one to reduce the
likelihood of mac address collision.
Thanks to Joe Perches and Dan Carpenter.
Suggested-by: Joe Perches <joe@perches.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix comparsion to NULL issues found by checkpatch.
Use !x instead of x == NULL.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver must reject frame interval enumeration of unsupported resolution.
This was detected by v4l2-compliance format ioctl test:
v4l2-compliance Format ioctls:
info: found 2 frameintervals for pixel format 4745504a and size 176x144
fail: v4l2-test-formats.cpp(123):
found frame intervals for invalid size 177x144
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: FAIL
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This is clearly a bug.
We need to set the DMA buffer size in the HW otherwise corruption can
occur when receiving packets.
This is probably not occuring because of small MTU values and because HW
has a default value internally (which currently is bigger than default
buffer size).
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This sparse warning is emitted by using v4l2_find_nearest_size in some
cases. Fix it in the framework.
>> drivers/media/i2c/ov5640.c:1394:14: sparse: incorrect type in assignment
+(different base types) @@ expected struct ov5640_mode_info const *mode @@
+got ststruct ov5640_mode_info const *mode @@
drivers/media/i2c/ov5640.c:1394:14: expected struct ov5640_mode_info const
+*mode
drivers/media/i2c/ov5640.c:1394:14: got struct ov5640_mode_info const ( *<
+noident> )[9]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
According to ov5640 datasheet xvclk is allowed to be between 6 and 54 MHz.
I run a successful test with 27 MHz.
Signed-off-by: Philipp Puschmann <pp@emlix.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The banding filter ON/OFF is controlled via bit 5 of COM8 register. It
is attempted to be enabled in ov772x_set_params() by the following line.
ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, 1);
But this unexpectedly results disabling the banding filter, because the
mask and set bits are exclusive.
On the other hand, ov772x_s_ctrl() correctly sets the bit by:
ret = ov772x_mask_set(client, COM8, BNDF_ON_OFF, BNDF_ON_OFF);
The same fix was already applied to non-soc_camera version of ov772x
driver in the commit commit a024ee14cd ("media: ov772x: correct setting
of banding filter")
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
When the subdevice doesn't provide s_power core ops callback, the
v4l2_subdev_call for s_power returns -ENOIOCTLCMD. If the subdevice
doesn't have the special handling for its power saving mode, the s_power
isn't required. So -ENOIOCTLCMD from the v4l2_subdev_call should be
ignored.
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The struct clk_init_data init variable is declared in the isp_xclk_init()
function so is an automatic variable allocated in the stack. But it's not
explicitly zero-initialized, so some init fields are left uninitialized.
This causes the data structure to have undefined values that may confuse
the common clock framework when the clock is registered.
For example, the uninitialized .flags field could have the CLK_IS_CRITICAL
bit set, causing the framework to wrongly prepare the clk on registration.
This leads to the isp_xclk_prepare() callback being called, which in turn
calls to the omap3isp_get() function that increments the isp dev refcount.
Since this omap3isp_get() call is unexpected, this leads to an unbalanced
omap3isp_get() call that prevents the requested IRQ to be later enabled,
due the refcount not being 0 when the correct omap3isp_get() call happens.
Fixes: 9b28ee3c91 ("[media] omap3isp: Use the common clock framework")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Flavio Leitner says:
====================
net: preserve sock reference when scrubbing the skb.
The sock reference is lost when scrubbing the packet and that breaks
TSQ (TCP Small Queues) and XPS (Transmit Packet Steering) causing
performance impacts of about 50% in a single TCP stream when crossing
network namespaces.
XPS breaks because the queue mapping stored in the socket is not
available, so another random queue might be selected when the stack
needs to transmit something like a TCP ACK, or TCP Retransmissions.
That causes packet re-ordering and/or performance issues.
TSQ breaks because it orphans the packet while it is still in the
host, so packets are queued contributing to the buffer bloat problem.
Preserving the sock reference fixes both issues. The socket is
orphaned anyways in the receiving path before any relevant action,
but the transmit side needs some extra checking included in the
first patch.
The first patch will update netfilter to check if the socket
netns is local before use it.
The second patch removes the skb_orphan() from the skb_scrub_packet()
and improve the documentation.
ChangeLog:
- split into two (Eric)
- addressed Paolo's offline feedback to swap the checks in xt_socket.c
to preserve original behavior.
- improved ip-sysctl.txt (reported by Cong)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
DW9807 is a 10 bit DAC from Dongwoon, designed for linear
control of voice coil motor.
This driver creates a V4L2 subdevice and
provides control to set the desired focus.
Signed-off-by: Alan Chiang <alanx.chiang@intel.com>
Signed-off-by: Andy Yeh <andy.yeh@intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The sock reference is lost when scrubbing the packet and that breaks
TSQ (TCP Small Queues) and XPS (Transmit Packet Steering) causing
performance impacts of about 50% in a single TCP stream when crossing
network namespaces.
XPS breaks because the queue mapping stored in the socket is not
available, so another random queue might be selected when the stack
needs to transmit something like a TCP ACK, or TCP Retransmissions.
That causes packet re-ordering and/or performance issues.
TSQ breaks because it orphans the packet while it is still in the
host, so packets are queued contributing to the buffer bloat problem.
Preserving the sock reference fixes both issues. The socket is
orphaned anyways in the receiving path before any relevant action
and on TX side the netfilter checks if the reference is local before
use it.
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netfilter assumes that if the socket is present in the skb, then
it can be used because that reference is cleaned up while the skb
is crossing netns.
We want to change that to preserve the socket reference in a future
patch, so this is a preparation updating netfilter to check if the
socket netns matches before use it.
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently fbcon claims fbdevs as soon as they are registered and takes over
the console as soon as the first fbdev gets registered.
This behavior is undesirable in cases where a smooth graphical bootup is
desired, in such cases we typically want the contents of the framebuffer
(typically a vendor logo) to stay in place as is.
The current solution for this problem (on embedded systems) is to not
enable fbcon.
This commit adds a new FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER config option,
which when enabled defers fbcon taking over the console from the dummy
console until the first text is displayed on the console. Together with the
"quiet" kernel commandline option, this allows fbcon to still be used
together with a smooth graphical bootup, having it take over the console as
soon as e.g. an error message is logged.
Note the choice to detect the first console output in the dummycon driver,
rather then handling this entirely inside the fbcon code, was made after
2 failed attempts to handle this entirely inside the fbcon code. The fbcon
code is woven quite tightly into the console code, making this to only
feasible option.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Replace comments about places where the console lock should be held with
calls to WARN_CONSOLE_UNLOCKED() to assert that it is actually held.
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
This is a preparation patch for adding a number of WARN_CONSOLE_UNLOCKED()
calls to the fbcon code, which may be built as a module (event though
usually it is not).
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
