-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the __struct_group() helper to fix 31 instances of the following
type of warnings:
30 net/bluetooth/mgmt_config.c:16:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
1 net/bluetooth/mgmt_config.c:22:33: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When enabling debug via CONFIG_BT_FEATURE_DEBUG include function and
line information by default otherwise it is hard to make any sense of
which function the logs comes from.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempts to detect if an ISO link has been waiting for an ISO
buffer for longer than the maximum allowed transport latency then
proceed to use hci_link_tx_to which prints an error and disconnects.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This aligns the usage of socket sk_sndtimeo as conn_timeout when
initiating a connection and then use it when scheduling the
resulting HCI command, similar to what has been done in bf98feea5b
("Bluetooth: hci_conn: Always use sk_timeo as conn_timeout").
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add the __counted_by_le() compiler attribute to the flexible array
member 'supported_commands' to improve access bounds-checking via
CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
- mt76: MLO support, HW restart improvements
- rtw88/89: small features, prep for RTL8922DE support
- ath10k: GTK rekey fixes
- cfg80211/mac80211:
- additions for more NAN support
- S1G channel representation cleanup
-----BEGIN PGP SIGNATURE-----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=3HjM
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-09-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Quite a bit more things, including pull requests from drivers:
- mt76: MLO support, HW restart improvements
- rtw88/89: small features, prep for RTL8922DE support
- ath10k: GTK rekey fixes
- cfg80211/mac80211:
- additions for more NAN support
- S1G channel representation cleanup
* tag 'wireless-next-2025-09-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (167 commits)
wifi: libertas: add WQ_UNBOUND to alloc_workqueue users
Revert "wifi: libertas: WQ_PERCPU added to alloc_workqueue users"
wifi: libertas: WQ_PERCPU added to alloc_workqueue users
wifi: cfg80211: fix width unit in cfg80211_radio_chandef_valid()
wifi: ath11k: HAL SRNG: don't deinitialize and re-initialize again
wifi: ath12k: enforce CPU endian format for all QMI data
wifi: ath12k: Use 1KB Cache Flush Command for QoS TID Descriptors
wifi: ath12k: Fix flush cache failure during RX queue update
wifi: ath12k: Add Retry Mechanism for REO RX Queue Update Failures
wifi: ath12k: Refactor REO command to use ath12k_dp_rx_tid_rxq
wifi: ath12k: Refactor RX TID buffer cleanup into helper function
wifi: ath12k: Refactor RX TID deletion handling into helper function
wifi: ath12k: Increase DP_REO_CMD_RING_SIZE to 256
wifi: cfg80211: remove IEEE80211_CHAN_{1,2,4,8,16}MHZ flags
wifi: rtw89: avoid circular locking dependency in ser_state_run()
wifi: rtw89: fix leak in rtw89_core_send_nullfunc()
wifi: rtw89: avoid possible TX wait initialization race
wifi: rtw89: fix use-after-free in rtw89_core_tx_kick_off_and_wait()
wifi: ath12k: Fix peer lookup in ath12k_dp_mon_rx_deliver_msdu()
wifi: mac80211: fix Rx packet handling when pubsta information is not available
...
====================
Link: https://patch.msgid.link/20250925232341.4544-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, packets with fixed IDs will be merged only if their
don't-fragment bit is set. This restriction is unnecessary since
packets without the don't-fragment bit will be forwarded as-is even
if they were merged together. The merged packets will be segmented
into their original forms before being forwarded, either by GSO or
by TSO. The IDs will also remain identical unless NETIF_F_TSO_MANGLEID
is set, in which case the IDs can become incrementing, which is also fine.
Clean up the code by removing the unnecessary don't-fragment checks.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250923085908.4687-5-richardbgobert@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Only merge encapsulated packets if their outer IDs are either
incrementing or fixed, just like for inner IDs and IDs of non-encapsulated
packets.
Add another ip_fixedid bit for a total of two bits: one for outer IDs (and
for unencapsulated packets) and one for inner IDs.
This commit preserves the current behavior of GSO where only the IDs of the
inner-most headers are restored correctly.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250923085908.4687-3-richardbgobert@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove is_ipv6 from napi_gro_cb and use sk->sk_family instead.
This frees up space for another ip_fixedid bit that will be added
in the next commit.
udp_sock_create always creates either a AF_INET or a AF_INET6 socket,
so using sk->sk_family is reliable. In IPv6-FOU, cfg->ipv6_v6only is
always enabled.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250923085908.4687-2-richardbgobert@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCaNNwBQAKCRAraS+Z+3y5
E8heAQDdJTR9rwAL7gD79cldlHP5PTmjyidLIoFG/efaGSbN1AD9EdvrykDU4xOG
aGaO8TooGUZf7vAL8tIFuMeydYvi/gM=
=Qu4T
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-09-23
We've added 9 non-merge commits during the last 33 day(s) which contain
a total of 10 files changed, 480 insertions(+), 53 deletions(-).
The main changes are:
1) A new bpf_xdp_pull_data kfunc that supports pulling data from
a frag into the linear area of a xdp_buff, from Amery Hung.
This includes changes in the xdp_native.bpf.c selftest, which
Nimrod's future work depends on.
It is a merge from a stable branch 'xdp_pull_data' which has
also been merged to bpf-next.
There is a conflict with recent changes in 'include/net/xdp.h'
in the net-next tree that will need to be resolved.
2) A compiler warning fix when CONFIG_NET=n in the recent dynptr
skb_meta support, from Jakub Sitnicki.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests: drv-net: Pull data before parsing headers
selftests/bpf: Test bpf_xdp_pull_data
bpf: Support specifying linear xdp packet data size for BPF_PROG_TEST_RUN
bpf: Make variables in bpf_prog_test_run_xdp less confusing
bpf: Clear packet pointers after changing packet data in kfuncs
bpf: Support pulling non-linear xdp data
bpf: Allow bpf_xdp_shrink_data to shrink a frag from head and tail
bpf: Clear pfmemalloc flag when freeing all fragments
bpf: Return an error pointer for skb metadata when CONFIG_NET=n
====================
Link: https://patch.msgid.link/20250924050303.2466356-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
busylock was protecting UDP sockets against packet floods,
but unfortunately was not protecting the host itself.
Under stress, many cpus could spin while acquiring the busylock,
and NIC had to drop packets. Or packets would be dropped
in cpu backlog if RPS/RFS were in place.
This patch replaces the busylock by intermediate
lockless queues. (One queue per NUMA node).
This means that fewer number of cpus have to acquire
the UDP receive queue lock.
Most of the cpus can either:
- immediately drop the packet.
- or queue it in their NUMA aware lockless queue.
Then one of the cpu is chosen to process this lockless queue
in a batch.
The batch only contains packets that were cooked on the same
NUMA node, thus with very limited latency impact.
Tested:
DDOS targeting a victim UDP socket, on a platform with 6 NUMA nodes
(Intel(R) Xeon(R) 6985P-C)
Before:
nstat -n ; sleep 1 ; nstat | grep Udp
Udp6InDatagrams 1004179 0.0
Udp6InErrors 3117 0.0
Udp6RcvbufErrors 3117 0.0
After:
nstat -n ; sleep 1 ; nstat | grep Udp
Udp6InDatagrams 1116633 0.0
Udp6InErrors 14197275 0.0
Udp6RcvbufErrors 14197275 0.0
We can see this host can now proces 14.2 M more packets per second
while under attack, and the victim socket can receive 11 % more
packets.
I used a small bpftrace program measuring time (in us) spent in
__udp_enqueue_schedule_skb().
Before:
@udp_enqueue_us[398]:
[0] 24901 |@@@ |
[1] 63512 |@@@@@@@@@ |
[2, 4) 344827 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[4, 8) 244673 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[8, 16) 54022 |@@@@@@@@ |
[16, 32) 222134 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[32, 64) 232042 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[64, 128) 4219 | |
[128, 256) 188 | |
After:
@udp_enqueue_us[398]:
[0] 5608855 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[1] 1111277 |@@@@@@@@@@ |
[2, 4) 501439 |@@@@ |
[4, 8) 102921 | |
[8, 16) 29895 | |
[16, 32) 43500 | |
[32, 64) 31552 | |
[64, 128) 979 | |
[128, 256) 13 | |
Note that the remaining bottleneck for this platform is in
udp_drops_inc() because we limited struct numa_drop_counters
to only two nodes so far.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250922104240.2182559-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move skb_frag_t adjustment into bpf_xdp_shrink_data() and extend its
functionality to be able to shrink an xdp fragment from both head and
tail. In a later patch, bpf_xdp_pull_data() will reuse it to shrink an
xdp fragment from head.
Additionally, in bpf_xdp_frags_shrink_tail(), breaking the loop when
bpf_xdp_shrink_data() returns false (i.e., not releasing the current
fragment) is not necessary as the loop condition, offset > 0, has the
same effect. Remove the else branch to simplify the code.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20250922233356.3356453-3-ameryhung@gmail.com
It is possible for bpf_xdp_adjust_tail() to free all fragments. The
kfunc currently clears the XDP_FLAGS_HAS_FRAGS bit, but not
XDP_FLAGS_FRAGS_PF_MEMALLOC. So far, this has not caused a issue when
building sk_buff from xdp_buff since all readers of xdp_buff->flags
use the flag only when there are fragments. Clear the
XDP_FLAGS_FRAGS_PF_MEMALLOC bit as well to make the flags correct.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20250922233356.3356453-2-ameryhung@gmail.com
Add defines for all event types and subtypes an ism device is known to
produce as it can be helpful for debugging purposes.
Introduces a generic 'struct dibs_event' and adopt ism device driver
and smc-d client accordingly. Tolerate and ignore other type and subtype
values to enable future device extensions.
SMC-D and ISM are now independent.
struct ism_dev can be moved to drivers/s390/net/ism.h.
Note that in smc, the term 'ism' is still used. Future patches could
replace that with 'dibs' or 'smc-d' as appropriate.
Signed-off-by: Julian Ruess <julianr@linux.ibm.com>
Co-developed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20250918110500.1731261-15-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use struct dibs_dmb instead of struct smc_dmb and move the corresponding
client tables to dibs_dev. Leave driver specific implementation details
like sba in the device drivers.
Register and unregister dmbs via dibs_dev_ops. A dmb is dedicated to a
single client, but a dibs device can have dmbs for more than one client.
Trigger dibs clients via dibs_client_ops->handle_irq(), when data is
received into a dmb. For dibs_loopback replace scheduling an smcd receive
tasklet with calling dibs_client_ops->handle_irq().
For loopback devices attach_dmb(), detach_dmb() and move_data() need to
access the dmb tables, so move those to dibs_dev_ops in this patch as well.
Remove remaining definitions of smc_loopback as they are no longer
required, now that everything is in dibs_loopback.
Note that struct ism_client and struct ism_dev are still required in smc
until a follow-on patch moves event handling to dibs. (Loopback does not
use events).
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20250918110500.1731261-14-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Provide the dibs_dev_ops->query_remote_gid() in ism and dibs_loopback
dibs_devices. And call it in smc dibs_client.
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20250918110500.1731261-13-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It can be debated how much benefit definition of vlan ids for dibs devices
brings, as the dmbs are accessible only by a single peer anyhow. But ism
provides vlan support and smcd exploits it, so move it to dibs layer as an
optional feature.
smcd_loopback simply ignores all vlan settings, do the same in
dibs_loopback.
SMC-D and ISM have a method to use the invalid VLAN ID 1FFF
(ISM_RESERVED_VLANID), to indicate that both communication peers support
routable SMC-Dv2. Tolerate it in dibs, but move it to SMC only.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20250918110500.1731261-12-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Define a uuid_t GID attribute to identify a dibs device.
SMC uses 64 Bit and 128 Bit Global Identifiers (GIDs) per device, that
need to be sent via the SMC protocol. Because the smc code uses integers,
network endianness and host endianness need to be considered. Avoid this
in the dibs layer by using uuid_t byte arrays. Future patches could change
SMC to use uuid_t. For now conversion helper functions are introduced.
ISM devices provide 64 Bit GIDs. Map them to dibs uuid_t GIDs like this:
_________________________________________
| 64 Bit ISM-vPCI GID | 00000000_00000000 |
-----------------------------------------
If interpreted as UUID [1], this would be interpreted as the UIID variant,
that is reserved for NCS backward compatibility. So it will not collide
with UUIDs that were generated according to the standard.
smc_loopback already uses version 4 UUIDs as 128 Bit GIDs, move that to
dibs loopback. A temporary change to smc_lo_query_rgid() is required,
that will be moved to dibs_loopback with a follow-on patch.
Provide gid of a dibs device as sysfs read-only attribute.
Link: https://datatracker.ietf.org/doc/html/rfc4122 [1]
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Reviewed-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Link: https://patch.msgid.link/20250918110500.1731261-11-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move struct device from ism_dev and smc_lo_dev to dibs_dev, and define a
corresponding release function. Free ism_dev in ism_remove() and smc_lo_dev
in smc_lo_dev_remove().
Replace smcd->ops->get_dev(smcd) by using dibs->dev directly.
An alternative design would be to embed dibs_dev as a field in ism_dev and
do the same for other dibs device driver specific structs. However that
would have the disadvantage that each dibs device driver needs to allocate
dibs_dev and each dibs device driver needs a different device release
function. The advantage would be that ism_dev and other device driver
specific structs would be covered by device reference counts.
Signed-off-by: Julian Ruess <julianr@linux.ibm.com>
Co-developed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Link: https://patch.msgid.link/20250918110500.1731261-9-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move the device add() and remove() functions from ism_client to
dibs_client_ops and call add_dev()/del_dev() for ism devices and
dibs_loopback devices. dibs_client_ops->add_dev() = smcd_register_dev() for
the smc_dibs_client. This is the first step to handle ism and loopback
devices alike (as dibs devices) in the smc dibs client.
Define dibs_dev->ops and move smcd_ops->get_chid to
dibs_dev_ops->get_fabric_id() for ism and loopback devices. See below for
why this needs to be in the same patch as dibs_client_ops->add_dev().
The following changes contain intermediate steps, that will be obsoleted by
follow-on patches, once more functionality has been moved to dibs:
Use different smcd_ops and max_dmbs for ism and loopback. Follow-on patches
will change SMC-D to directly use dibs_ops instead of smcd_ops.
In smcd_register_dev() it is now necessary to identify a dibs_loopback
device before smcd_dev and smcd_ops->get_chid() are available. So provide
dibs_dev_ops->get_fabric_id() in this patch and evaluate it in
smc_ism_is_loopback().
Call smc_loopback_init() in smcd_register_dev() and call
smc_loopback_exit() in smcd_unregister_dev() to handle the functionality
that is still in smc_loopback. Follow-on patches will move all smc_loopback
code to dibs_loopback.
In smcd_[un]register_dev() use only ism device name, this will be replaced
by dibs device name by a follow-on patch.
End of changes with intermediate parts.
Allocate an smcd event workqueue for all dibs devices, although
dibs_loopback does not generate events.
Use kernel memory instead of devres memory for smcd_dev and smcd->conn.
Since commit a72178cfe8 ("net/smc: Fix dependency of SMC on ISM") an ism
device and its driver can have a longer lifetime than the smc module, so
smc should not rely on devres to free its resources [1]. It is now the
responsibility of the smc client to free smcd and smcd->conn for all dibs
devices, ism devices as well as loopback. Call client->ops->del_dev() for
all existing dibs devices in dibs_unregister_client(), so all device
related structures can be freed in the client.
When dibs_unregister_client() is called in the context of smc_exit() or
smc_core_reboot_event(), these functions have already called
smc_lgrs_shutdown() which calls smc_smcd_terminate_all(smcd) and sets
going_away. This is done a second time in smcd_unregister_dev(). This is
analogous to how smcr is handled in these functions, by calling first
smc_lgrs_shutdown() and then smc_ib_unregister_client() >
smc_ib_remove_dev(), so leave it that way. It may be worth investigating,
whether smc_lgrs_shutdown() is still required or useful.
Remove CONFIG_SMC_LO. CONFIG_DIBS_LO now controls whether a dibs loopback
device exists or not.
Link: https://www.kernel.org/doc/Documentation/driver-model/devres.txt [1]
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Link: https://patch.msgid.link/20250918110500.1731261-8-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
smcd_buf_free() calls smc_ism_unregister_dmb(lgr->smcd, buf_desc) and
then unconditionally frees buf_desc.
Remove the cleaning up of fields of buf_desc in
smc_ism_unregister_dmb(), because it is not helpful.
This removes the only usage of ISM_ERROR from the smc module. So move it
to drivers/s390/net/ism.h.
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://patch.msgid.link/20250918110500.1731261-2-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Today, once an inet_bind_bucket enters a state where fastreuse >= 0 or
fastreuseport >= 0 after a socket is explicitly bound to a port, it remains
in that state until all sockets are removed and the bucket is destroyed.
In this state, the bucket is skipped during ephemeral port selection in
connect(). For applications using a reduced ephemeral port
range (IP_LOCAL_PORT_RANGE socket option), this can cause faster port
exhaustion since blocked buckets are excluded from reuse.
The reason the bucket state isn't updated on port release is unclear.
Possibly a performance trade-off to avoid scanning bucket owners, or just
an oversight.
Fix it by recalculating the bucket state when a socket releases a port. To
limit overhead, each inet_bind2_bucket stores its own (fastreuse,
fastreuseport) state. On port release, only the relevant port-addr bucket
is scanned, and the overall state is derived from these.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250917-update-bind-bucket-state-on-unhash-v5-1-57168b661b47@cloudflare.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
synflood_warned had to be u32 for xchg(), but ensuring
atomicity is not really needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250919204856.2977245-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk->sk_sndbuf is read-mostly in tx path, so move it from
sock_write_tx group to more appropriate sock_read_tx.
sk->sk_err_soft was not identified previously, but
is used from tcp_ack().
Move it to sock_write_tx group for better cache locality.
Also change tcp_ack() to clear sk->sk_err_soft only if needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250919204856.2977245-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk_uid and sk_protocol are read from inet6_csk_route_socket()
for each TCP transmit.
Also read from udpv6_sendmsg(), udp_sendmsg() and others.
Move them to sock_read_tx for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250919204856.2977245-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
inet_hash() and inet6_hash() are exactly the same.
Also, we do not need to export inet6_hash().
Let's consolidate the two into __inet_hash() and rename it to inet_hash().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250919083706.1863217-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__inet_hash() is called from inet_hash() and inet6_hash with osk NULL.
Let's remove the 2nd arg from __inet_hash().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250919083706.1863217-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These were used by S1G for older chandef representation, but
are no longer needed. Clean them up, even if we can't drop
them from the userspace API entirely.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
udp_v4_early_demux already returns drop reasons as it either returns 0
or ip_mc_validate_source, which itself returns drop reasons. Its return
value is also already used as a drop reason itself.
Makes this explicit by making it return drop reasons.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250915091958.15382-2-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
assoc_drv_spc is the size of psp_assoc.drv_data[].
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250918192539.1587586-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using flags to check sk_state only makes sense to check for a subset
of states in parallel e.g. sk_fullsock(). We are not doing that
here. Compare for individual states directly.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250918155205.2197603-4-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is weird to cast to a timewait_sock before checking sk_state, even
if the use is after such a check. Remove the tw local variable, and
use inet_twsk() directly in the timewait branch.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250918155205.2197603-3-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the S1G channelisation implementation differs from that of
VHT, which is the PHY that S1G is based on. The major difference between
the clock rate is 1/10th of VHT. However how their channelisation is
represented within cfg80211 and mac80211 vastly differ.
To rectify this, remove the use of IEEE80211_CHAN_1/2/4.. flags that were
previously used to indicate the control channel width, however it should be
implied that the control channels are 1MHz in the case of S1G. Additionally,
introduce the invert - being IEEE80211_CHAN_NO_4/8/16MHz - that imply
the control channel may not be used for a certain bandwidth. With these
new flags, we can perform regulatory and chandef validation just as we would
for VHT.
To deal with the notion that S1G PHYs may contain a 2MHz primary channel,
introduce a new variable, s1g_primary_2mhz, which indicates whether we are
operating on a 2MHz primary channel. In this case, the chandef::chan points to
the 1MHz primary channel pointed to by the primary channel location. Alongside
this, introduce some new helper routines that can extract the sibling 1MHz
channel. The sibling being the alternate 1MHz primary subchannel within the
2MHz primary channel that is not pointed to by chandef::chan.
Furthermore, due to unique restrictions imposed on S1G PHYs, introduce
a new flag, IEEE80211_CHAN_S1G_NO_PRIMARY, which states that the 1MHz channel
cannot be used as a primary channel. This is assumed to be set by vendors
as it is hardware and regdom specific, When we validate a 2MHz primary channel,
we need to ensure both 1MHz subchannels do not contain this flag. If one or
both of the 1MHz subchannels contain this flag then the 2MHz primary is not
permitted for use as a primary channel.
Properly integrate S1G channel validation such that it is implemented
according with other PHY types such as VHT. Additionally, implement a new
S1G-specific regulatory flag to allow cfg80211 to understand specific
vendor requirements for S1G PHYs.
Signed-off-by: Arien Judge <arien.judge@morsemicro.com>
Signed-off-by: Andrew Pope <andrew.pope@morsemicro.com>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250918051913.500781-2-lachlan.hodges@morsemicro.com
[remove redundant NL80211_ATTR_S1G_PRIMARY_2MHZ check]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for sending management frame over a NAN Device
interface:
- Declare support for the supported management frames types.
- Since action frame transmissions over a NAN Device interface
do not necessarily require a channel configuration, e.g., they
can be transmitted during DW, modify the Tx path to avoid
accessing channel information for NAN Device interface.
- In addition modify the points in the Tx path logic to account
for cases that a band is not specified in the Tx information.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250908140015.23b160089228.I65a58af753bcbcfb5c4ad8ef372d546f889725ba@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the driver indicates that the device has joined
a cluster, store the cluster ID. This is needed for data
path operations, e.g., filtering received frames etc.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250908140015.63e9fef2a3aa.I6c858185c9e71f84bd2c5174d7ee45902b4391c3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The drivers should notify upper layers and user space when a NAN device
joins a cluster. This is needed, for example, to set the correct addr3
in SDF frames. Add API to report cluster join event.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250908140015.ad27b7b6e4d9.I70b213a2a49f18d1ba2ad325e67e8eff51cc7a1f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This notification will be used by the device to inform user space
about upcoming DW. When received, user space will be able to prepare
multicast Service Discovery Frames (SDFs) to be transmitted during the
next DW using %NL80211_CMD_FRAME command on the NAN management interface.
The device/driver will take care to transmit the frames in the correct
timing. This allows to implement a synchronized Discovery Engine (DE)
in user space, if the device doesn't support DE offload.
Note that this notification can be sent before the actual DW starts as
long as the driver/device handles the actual timing of the SDF
transmission.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250908140015.0e1d15031bab.I5b1721e61b63910452b3c5cdcdc1e94cb094d4c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Current NAN APIs have only basic configuration for master
preference and operating bands. Add and parse additional parameters
which provide more control over NAN synchronization. The newly added
attributes allow to publish additional NAN attributes and vendor
elements in NAN beacons, control scan and discovery beacons
periodicity, enable/disable DW notifications etc.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
tested: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250908140015.a4779492bf8e.I375feb919bd72358173766b9fe10010c40796b33@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR (net-6.17-rc7).
No conflicts.
Adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en/fs.h
9536fbe10c ("net/mlx5e: Add PSP steering in local NIC RX")
7601a0a462 ("net/mlx5e: Add a miss level for ipsec crypto offload")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrei Vagin reported that blamed commit broke CRIU.
Indeed, while we want to keep sk_uid unchanged when a socket
is cloned, we want to clear sk->sk_ino.
Otherwise, sock_diag might report multiple sockets sharing
the same inode number.
Move the clearing part from sock_orphan() to sk_set_socket(sk, NULL),
called both from sock_orphan() and sk_clone_lock().
Fixes: 5d6b58c932 ("net: lockless sock_i_ino()")
Closes: https://lore.kernel.org/netdev/aMhX-VnXkYDpKd9V@google.com/
Closes: https://github.com/checkpoint-restore/criu/issues/2744
Reported-by: Andrei Vagin <avagin@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Andrei Vagin <avagin@google.com>
Link: https://patch.msgid.link/20250917135337.1736101-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create psp_dev_rcv(), which drivers can call to psp decapsulate and attach
a psp_skb_ext to an skb.
psp_dev_rcv() only supports what the PSP architecture specification
refers to as "transport mode" packets, where the L3 header is either
IPv6 or IPv4.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250917000954.859376-18-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Create a new function psp_encapsulate(), which takes a TCP packet and
PSP encapsulates it according to the "Transport Mode Packet Format"
section of the PSP Architecture Specification.
psp_encapsulate() does not push a PSP trailer onto the skb. Both IPv6
and IPv4 are supported. Virtualization cookie is not included.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250917000954.859376-14-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
