On some ARM64 platforms with 4K PAGE_SIZE, page_pool fragment
allocation in the RX refill path can cause 15-20% throughput
regression under high connection counts (>16 TCP streams).
Add an ethtool private flag "full-page-rx" that allows the user to
force one RX buffer per page, bypassing the page_pool fragment path.
This restores line-rate (180+ Gbps) performance on affected platforms.
Usage:
ethtool --set-priv-flags eth0 full-page-rx on
There is no behavioral change by default. The flag must be explicitly
enabled by the user or udev rule.
The existing single-buffer-per-page logic for XDP and jumbo frames is
consolidated into a new helper mana_use_single_rxbuf_per_page() which
is now the single decision point for both the automatic and
user-controlled paths.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/20260729063347.3388035-3-dipayanroy@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KSZ8463 uses the KSZ9893 DSA TAG driver. However, the KSZ8463 doesn't
use the tail tag to convey timestamps to the host as KSZ9893 does. It
uses the reserved fields in the PTP header instead.
Add a KSZ8463-specific DSA_TAG driver to handle KSZ8463 timestamps.
There is no information in the tail tag to distinguish PTP packets from
others so use the ptp_classify_raw() helper to find the PTP packets and
extract the timestamp from their PTP headers.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260727-ksz-new-ptp-v3-8-caba39e680e3@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an fdb entry points at a nexthop group, vxlan_fdb_nh_path_select()
resolves the selected leg's remote IP but leaves the UDP destination port
at the device default (vxlan->cfg.dst_port).
Extend nexthop_path_fdb_result() to also return the selected nexthop's
NHA_DST_PORT (0 when unset) and have vxlan_fdb_nh_path_select() store it
in rdst->remote_port. vxlan_xmit_one() already prefers rdst->remote_port
when non-zero and falls back to the device port otherwise, so nexthops
without a port are unaffected.
This lets one fdb nexthop group load-balance a flow across legs that
share an underlay IP but differ in UDP destination port.
Signed-off-by: Jack Ma <jack4it@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260724-b4-vxlan-fdb-port-v5-2-cd1c6aeee058@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 1274e1cc42 ("vxlan: ecmp support for mac fdb entries") lets a
single inner MAC be reached through a group of remote VTEPs, with the
kernel flow-hashing across the group members. Each member carries its
own remote IP, but the UDP destination port is always taken from the
VXLAN device (vxlan->cfg.dst_port) and cannot be set per member.
Some deployments pack several receivers behind one underlay IP and tell
them apart by UDP port, so they need a per-nexthop destination port to
spread flows across (IP, port) tuples rather than IP alone.
Add a netlink attribute NHA_DST_PORT (__be16, mirroring NDA_PORT) that
carries an optional UDP destination port on an fdb nexthop. It is only
accepted together with NHA_FDB and NHA_GATEWAY; it is stored in struct
nh_info and echoed back on dump. The attribute is named generically
rather than fdb-specific so it can be reused should another nexthop type
ever need a destination port. This patch is control-plane plumbing
only; the VXLAN datapath is wired up in a follow-up patch, so behaviour
is unchanged for now.
Signed-off-by: Jack Ma <jack4it@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260724-b4-vxlan-fdb-port-v5-1-cd1c6aeee058@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clarify the re-parenting expectations. Specifically that @delete
on a queue removes it from the hierarchy which is a bit unusual
in the overall API structure.
IIRC the implicit delete behavior was introduced because otherwise
it would not be possible to remove a queue from the hierarchy
without changing at least one handle of the shapers. Normally
"removal" is done by "adding" to the new parent, but "outside
the hierarchy" does not have a parent we can point at.
Link: https://patch.msgid.link/20260724210756.1553565-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is true that the user-facing group() operation can only
be invoked with queues as leaves (see net_shaper_parse_leaf()),
but the driver facing op is also called when we delete a node.
When we delete a node we conceptually call
group(parent, node.list_of_leaves)
to add node's leaves to the parent. Node deletion "mid-hierarchy"
is supported so some of the leaves may themselves be nodes.
Therefore the driver facing group() may be called with nodes.
Remove the incorrect comment, and add a comment about differences
between the Netlink API and driver facing API.
Link: https://patch.msgid.link/20260724210756.1553565-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hci_conn::iso_data is accessed and modified without lock or RCU.
This leads to a race
[Task hdev->workqueue] [Task 2]
iso_recv iso_conn_put(conn)
conn = LOAD hcon->iso_data iso_conn_free(conn)
iso_conn_hold_unless_zero(conn) hcon->iso_data = NULL
kfree(conn)
kref_get_unless_zero(&conn->ref) /* UAF */
and also to races in iso_conn_add() vs. iso_conn_free().
Fix by adding spinlock hci_conn::proto_lock and using it to guard
hci_conn::iso_data.
Fixes: dc26097bdb ("Bluetooth: ISO: Use kref to track lifetime of iso_conn")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-----BEGIN PGP SIGNATURE-----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=m6TK
-----END PGP SIGNATURE-----
Merge tag 'nf-next-26-07-24' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next,
just a small batch with accumulated pending updates:
1) In IPVS, use system_dfl_long_wq instead of system_long_wq, from
Ismael Luceno.
2) Add missing .checkentry in xt_tcpmss for IPv6, this is a follow up
to a recent harderning, from Florian Westphal.
3) Address a sashiko report in the NAT SIP helper, from Florian Westphal.
4) Tear down flow entries with stale routes using the GC, this is to
detect route updates when hardware offload is enabled.
5) Pass master conntrack as parameter to functions instead of using
exp->master as preparation work to turn exp->master into a cookie.
6) Move expectation event_mask to the nf_conntrack_expect object,
again as preparation work to turn exp->master into a cookie.
7) In IPVS, use kzalloc_obj{s}() typesafe allocations, from Subasri S.
* tag 'nf-next-26-07-24' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
ipvs: use type-safe allocation helpers in ip_vs_rht_alloc
netfilter: nf_conntrack_expect: store event cache in expectation
netfilter: conntrack_helper: pass master conntrack to helper functions
netfilter: flowtable: tear down flow entries with stale dst from GC
netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet
netfilter: xt_tcpmss: extend checkentry to ipv6
ipvs: Move defense_work and est_reload_work to system_dfl_long_wq
====================
Link: https://patch.msgid.link/20260724104932.437729-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- new driver mm81x for an S1G device
- new driver nxpwifi for NXP devices
(mostly forked off from mwifiex)
- ath12k: much kernel infrastructure integration work
- brcmfmac: DPP support, some Cypress part update
- nl80211: per-link statistics support
-----BEGIN PGP SIGNATURE-----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=eCJ1
-----END PGP SIGNATURE-----
Merge tag 'wireless-2026-07-26' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
wireless-next-2026-07-26
Mostly driver changes this time:
- new driver mm81x for an S1G device
- new driver nxpwifi for NXP devices
(mostly forked off from mwifiex)
- ath12k: much kernel infrastructure integration work
- brcmfmac: DPP support, some Cypress part update
- nl80211: per-link statistics support
====================
Link: https://patch.msgid.link/20260726105205.942922-60-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5ouZ
-----END PGP SIGNATURE-----
Merge tag 'nf-26-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following batch contains Netfilter/IPVS fixes for net. This batch
includes a mix of IPVS follow ups related to Sashiko reports, as well as
crash fixes for connection tracking expectation, helpers, ipset and
nf_tables mostly for old bugs. This also includes a fix for the
flowtable tunnel selftest.
1) Use s32 instead of s16 to calculate the remaining payload containing
SIP messages, otherwise underflow is possible allowing out-of-bound
memory access beyond the skb->data area. From Xiang Mei.
2) Fix the counter check in the flowtable selftest for tunnels, from
Lorenzo Bianconi.
3) Add and use nf_ct_expect_related_pair() to add the RTP and RTCP
expectations under the expectation lock, this is required by the SIP
and H.323 NAT helpers. This fixes a possible reinsertion of an
expectation with the DEAD flag set on while looping to find
consecutive ports.
4) Fix ipset UaF during table resize by blocking comment updates on
kernel-side adds. From David Lee.
5) Do not propagate the IP_VS_CONN_F_ONE_PACKET flag when using IPVS
state synchronization, otherwise reaching stale freed from
ip_vs_conn struct is possible, Zhiling Zou.
6) Adjust the hn1 hash node when the forwarding method changes between
MASQ and non-MASQ for an already hashed connection. This can leave
stale hash nodes pointing to a freed struct ip_vs_conn and trigger
UaF while reading /proc/net/ip_vs_conn. From Julian Anastasov.
7) nft_object rhltable needs to be per table, just like chain rhltable,
otherwise UaF from object lookup path while netns is being released.
There is also the nlevent path that can reach stale objects. Placing
this rhltable under the table hierarchy fixes this issue.
8) Reject invalid combined usage of hashlimit tables with and without
XT_HASHLIMIT_RATE_MATCH flag mode, otherwise access to uninitialized
.burst field of dsthash_ent is possible.
9) Fix checksum validations in IPVS performed from LOCAL_IN,
from Julian Anastasov.
10) Fix incorrect packet offset to layer 4 protocol in IPVS, uncovered
by Sashiko, from Julian Anastasov.
11) Skip the mangling of ICMP replies for non-first fragments, also
reported by Sashiko. Also from Julian.
12) Clear ip_vs_conn flags under the spinlock to fix a possible data
race. From Julian Anastasov.
13) Fix incorrect calculation of the payload bitmask in the nf_tables
hardware offload support, leading to UBSAN splat. From Xiang Mei.
* tag 'nf-26-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_payload: fix mask build for partial field offload
ipvs: clear the nfct flag under lock
ipvs: do not mangle ICMP replies for non-first fragments
ipvs: fix places with wrong packet offsets
ipvs: fix the checksum validations
netfilter: xt_hashlimit: validate hashtable supports XT_HASHLIMIT_RATE_MATCH
netfilter: nf_tables: make nft_object rhltable per table
ipvs: adjust double hashing when fwd method changes
ipvs: do not propagate one-packet flag to synced conns
netfilter: ipset: do not update comments from kernel-side hash adds
netfilter: nf_conntrack_expect: add and use nf_ct_expect_related_pair()
selftests: netfilter: nft_flowtable.sh: fix offload counter verification for tunnel tests
netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp()
====================
Link: https://patch.msgid.link/20260723163910.274695-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The zero-copy Tx batch parser stops when it encounters an invalid
descriptor. If this happens after one or more continuation descriptors,
the Tx consumer can be advanced past fragments that are neither submitted
to the driver nor returned to userspace through the completion ring.
A similar problem occurs when a packet exceeds xdp_zc_max_segs. The
descriptors consumed up to the limit are released without completion, and
the remaining continuation descriptors can subsequently be interpreted
as the beginning of another packet.
Parse Tx batches in packet units and distinguish descriptors belonging to
complete valid packets from descriptors consumed while draining an
invalid or oversized packet. Return the former to the driver and append
the latter to the CQ address area so userspace can reclaim their UMEM
frames.
Treat a standalone invalid descriptor as a one-descriptor reclaim-only
packet. Advancing the Tx-ring consumer releases the ring slot, but does
not by itself return ownership of the referenced UMEM frame to userspace.
Once draining starts, continue until the packet's end-of-packet
descriptor is consumed. Preserve the drain state on the socket when EOP
has not yet been supplied, so draining can continue during a later call.
Leave incomplete but otherwise valid packets on the Tx ring.
Shared-UMEM pools using multi-buffer Tx also need packet-framed parsing.
Walk their Tx sockets one packet at a time, preserving the existing
per-socket fairness scheme, instead of using the legacy one-descriptor
fallback. Keep that fallback for shared pools that do not use
multi-buffer Tx. Since the drain state is maintained per socket and both
the singular and shared paths can resume an interrupted drain, changing
the socket list from singular to shared requires no special bind-time
transition.
CQ entries are positional, and drivers may complete only part of the Tx
work returned by xsk_tx_peek_release_desc_batch(). Therefore, reclaim-only
entries cannot be published immediately when earlier driver-visible
descriptors are still outstanding.
Track the number of driver-visible CQ entries preceding the reclaim
entries. Let xsk_tx_completed() publish partial hardware Tx completions,
and publish the reclaim entries only after every earlier Tx descriptor
has completed. Complete a reclaim-only batch immediately when there is no
driver-visible work in front of it, and prevent another Tx batch from
being appended while reclaim entries remain pending.
Also cap batch processing by the size of the pool's temporary descriptor
array, as Tx rings belonging to sockets sharing a UMEM may have different
sizes.
This ensures that every invalid Tx descriptor consumed by the ZC batch
path is either submitted to the driver as part of a valid packet or
returned to userspace without violating CQ completion ordering.
Reviewed-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Fixes: cf24f5a5fe ("xsk: add support for AF_XDP multi-buffer on Tx path")
Link: https://patch.msgid.link/20260719135609.147823-5-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The temporary Tx descriptor array in an XSK buffer pool is currently
sized from the Tx ring of the socket that creates the pool.
This is insufficient for shared-UMEM Tx. A later socket may have a
larger Tx ring and submit a valid multi-buffer packet containing more
descriptors than the first socket's ring, while still remaining within
the device's xdp_zc_max_segs limit.
A packet-framed batch parser bounded by the temporary array cannot reach
the end-of-packet descriptor in that case. It leaves the packet on the
Tx ring and encounters the same packet on every subsequent attempt,
stalling Tx processing for that socket.
Size the temporary descriptor array to the larger of the first Tx ring
and the device's xdp_zc_max_segs capability. This keeps the array large
enough to inspect one maximum-sized valid packet. Larger shared Tx rings
do not require further resizing, as they can be processed over multiple
batches.
Following commit will actually address the data path side.
Fixes: d558196604 ("xsk: support ZC Tx multi-buffer in batch API")
Reviewed-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260719135609.147823-4-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix generic xmit path multi-buffer logic when packets are either too big
(count of descriptors exceed MAX_SKB_FRAGS) or an invalid descriptor is
included in fragmented packet. Introduce xdp_sock::drain_cont and act
upon this flag - when it is set, keep on consuming descriptors from
AF_XDP Tx ring and put them directly onto Cq. Previously these
descriptors were silently lost and could never be reached again.
Fixes: cf24f5a5fe ("xsk: add support for AF_XDP multi-buffer on Tx path")
Closes: https://lore.kernel.org/all/20260425041726.85FB3C2BCB2@smtp.kernel.org/
Reviewed-by: Jason Xing <kernelxing@tencent.com>
Co-developed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # wrapped cq addr submission onto routine
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260719135609.147823-3-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Store the event cache in the expectation instead of accessing the
exp->master cache, as a step forward towards turning the exp->master
into a cookie.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In case of route updates, tear down flow entries with stale dst to give
them a chance to obtain a fresh route.
This is specifically useful for hardware offloaded entries, where the
flowtable software dataplane sees no packet, where the existing check
for stale dst entries does not help.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Cross-merge networking fixes after downstream PR (net-7.2-rc5).
Conflicts:
drivers/net/amt.c
3656a79f94 ("amt: re-read skb header pointers after every pull")
586c4dcf28 ("amt: no longer rely on RTNL in amt_fill_info()")
https://lore.kernel.org/amIaJr3aOQNS_Fvl@sirena.org.uk
Adjacent changes:
drivers/net/geneve.c
8efb8f8bbb ("geneve: require CAP_NET_ADMIN in the device netns for changelink")
0ba269933f ("geneve: convert config to RCU-protected pointer")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko warns that ip_vs_nat_icmp() unconditionally mangles the
payload for embedded non-first IPv4 fragments. The problem is
in the very old inverted pp->dont_defrag check which should not
continue when embedded is a non-first TCP/UDP/SCTP fragment.
Check for embedded non-first fragment is also missing from
ip_vs_out_icmp_v6(), it is needed before any connection
lookups that expect ports after the network headers.
Drop the blocking code from ip_vs_in_icmp_v6() which prevents
ICMPv6 from local clients to use non-MASQ forwarding.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://sashiko.dev/#/patchset/20260720201122.79882-1-ja%40ssi.bg
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The offsets we use to packet headers and payloads should be
based on skb->data. We even already respect non-zero
network offset in ip_vs_fill_iph_skb() but some places
do it wrongly and support only zero offset which is expected
for the IP layer where IPVS has hooks.
Change all places that instead of skb->data use offsets based
on the network header (skb_network_header, ip_hdr, etc) because
this doubles the network offset as noted by Sashiko.
For ip_vs_nat_icmp_v6() we can even rely on the IPv6 header
parsing done by the caller.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://sashiko.dev/#/patchset/20260710143733.29741-2-fw%40strlen.de
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ip_vs_in_icmp_v6() is missing checksum validation for ICMPv6
packets from clients. In fact, as for TCP/UDP we should
validate the checksum for ICMP packets only when we
mangle the packets on MASQ or on reply for tunnel.
Also, Sashiko points out that handle_response_icmp() being
common for IPv4 and IPv6 is missing the pseudo-header
calculation while validating ICMPv6 messages from real
servers which is a problem if checksum is not validated
by the hardware.
Fix the problems by creating ip_vs_checksum_common_check()
helper and use it for TCP/UDP/ICMP both for IPv4 and IPv6.
Rely on the nf_checksum() for validating the ICMP messages
but use it also for TCP and UDP.
Use correct IP offset for IP_VS_DBG_RL_PKT for TCP/UDP/SCTP.
IPVS packets (TCP/UDP/SCTP/ICMP) do not need checksum
validation on LOCAL_OUT (local clients or local real
servers) and on FORWARD (traffic from servers on LAN).
Do it only on LOCAL_IN, in case nf_checksum() is not
called on PRE_ROUTING.
Also, ip_vs_checksum_complete() can be marked static.
Fixes: 2a3b791e6e ("IPVS: Add/adjust Netfilter hook functions and helpers for v6")
Link: https://sashiko.dev/#/patchset/20260708180315.77413-1-ja%40ssi.bg
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The nft_object rhltable is global, this allows for accessing objects
that are being dismangled from lookup path by other existing netns.
Given the nft_obj_destroy() releases the object inmediately, this might
lead to use-after-free of these objects that are being released.
Make the existing rhltable per table to address this issue to deal with
with the nft_rcv_nl_event() path too.
Update nft_obj_lookup() to take the table as non-const, otherwise,
compiler complains when passing the objname_ht to rhltable_lookup().
Fixes: 4d44175aa5 ("netfilter: nf_tables: handle nft_object lookups via rhltable")
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The SYN-RECEIVED request-socket path in tcp_check_req() accepts an
in-window RST without requiring SEG.SEQ to exactly match RCV.NXT. A
non-exact RST therefore removes the request instead of eliciting a
challenge ACK.
RFC 9293 section 3.10.7.4 applies the RFC 5961 reset check in
SYN-RECEIVED: an exact RST resets the connection, while a non-exact
in-window RST must trigger a challenge ACK and be dropped.
Apply that check before the ACK-field validation, following the RFC
sequence-number, RST, then ACK processing order. Factor the per-netns
challenge ACK quota out of tcp_send_challenge_ack() so request sockets
can share it. Use the request socket's send_ack() callback and its own
out-of-window ACK timestamp to send and rate-limit the response.
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Ao Wang <wangao@seu.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Fixes: 282f23c6ee ("tcp: implement RFC 5961 3.2")
Cc: stable@vger.kernel.org
Signed-off-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260717081443.809393-2-yangyx22@mails.tsinghua.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new function to insert a pair of expectations, this is required by
the SIP and H323 NAT helpers. The spinlock is held to check if there is
a slot for both expectations, in such case, insert them.
This removes the need for nf_ct_unexpect_related() inside the loop to
find a pair of consecutive ports, otherwise inserting expectations whose
dead flag is already set on can happen.
Bump master_help->expecting for the expectation class after checking if
the expectation fits in the master expectation list, which is needed for
this new _pair() function variant to run the eviction routine including
the preallocated slot for the first expectation in the pair.
Fixes: b8b09dc2bf ("netfilter: nf_conntrack_expect: use conntrack GC to reap expectations")
Reported-by: Jaeyeong Lee <iostreampy@proton.me>
Link: https://patch.msgid.link/178377968720.33756.12204817361601593230@proton.me/
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The BSS lookup for an authentication or association request can fail
for three distinct reasons: cfg80211 has no scan entry at all for the
BSSID/channel, an entry exists but is older than
IEEE80211_SCAN_RESULT_EXPIRE (and not held), or a fresh entry exists
but its use_for flags do not allow this use. All three currently
surface as the same generic extack message "Error fetching BSS for
link" on the MLO association path, and as a bare -ENOENT with no
message at all on the authentication and non-MLO association paths.
Since wpa_supplicant logs the extack message verbatim ("nl80211:
kernel reports: ..."), that message is often the only diagnostic a
user sees when an MLO association degrades to fewer links, and it
does not say whether a fresh scan could have helped. In practice the
expired case is common for MLO partner links: 6 GHz is passive-scan
in many regulatory domains, so the partner-link entry is routinely
stale by the time userspace requests the association even though the
link is perfectly usable.
Let __cfg80211_get_bss() take an optional extack and record, during
the same bss_lock walk that fails the lookup, whether any matching
entry was rejected for being expired or for not being usable for the
requested use, and set a distinct message for each case (and a
combined one when different entries were rejected for different
reasons). Reorder the checks in the walk so that an entry's identity
(type, privacy, channel, BSSID/SSID) is established before the
usability checks; this doesn't change which entry is returned since
an entry is only used when all checks pass.
Also give the -EINVAL paths in nl80211_assoc_bss() proper messages
while at it, and keep pointing the bad_attr at the failing link on
the MLO path there; the message for that case is already set by the
lookup itself.
Signed-off-by: Louis Kotze <loukot@gmail.com>
Link: https://patch.msgid.link/20260722070734.3612581-2-loukot@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add STA/P2P-client support to ieee80211_probe_peer(): when called
for a station interface, send a null-data frame (TODS) to the
associated AP and report the ACK via cfg80211_probe_status().
For MLO connections the driver/firmware selects the link
(IEEE80211_LINK_UNSPECIFIED); for non-MLO the single link is used.
Signed-off-by: Priyansha Tiwari <priyansha.tiwari@oss.qualcomm.com>
Link: https://patch.msgid.link/20260709114228.672317-2-pritiwa@qti.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For association and link reconfiguration response, parse
and store the enhanced BSS parameter change counter out
of the enhanced critical updates field in the multi-link
common info or per-STA profile. These are required for
UHR connections.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260714134154.adb9fc29252d.I625580fbadbbf4a1440d88d3675586477f1a3263@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a TC filter attached to a qdisc filter chain returns
TC_ACT_REDIRECT (ex: via an eBPF program calling bpf_redirect() or an
act_bpf action), the redirect was silently lost i.e no qdisc classify
function handled TC_ACT_REDIRECT, so the packet fell through the
switch and was enqueued normally instead of being redirected.
This has been broken since bpf_redirect() was introduced for TC in
commit 27b29f6305 ("bpf: add bpf_redirect() helper"). We got lucky
for a long time because bpf_net_context was a per-CPU variable that
was always available.
commit 401cb7dae8 ("net: Reference bpf_redirect_info via task_struct
on PREEMPT_RT.") turned bpf_net_context into a task_struct member that
is only set up by explicit callers. Without a caller setting it up,
bpf_redirect() itself crashes with a NULL pointer dereference in
bpf_net_ctx_get_ri(). However, even with bpf_net_context available,
TC_ACT_REDIRECT from qdisc filter chains cannot be honored without
adding skb_do_redirect() calls to every qdisc classify function, which
would require changes across net/sched/. Isolate it to ebpf core where
it belongs.
Instead, add a tcf_classify_qdisc() inline helper in pkt_cls.h, as a
wrapper around tcf_classify() for use by qdisc classify functions and
tcf_qevent_handle(). When the classify verdict is TC_ACT_REDIRECT,
the wrapper converts it to TC_ACT_SHOT, dropping the packet rather
than letting it continue silently. Dropping is preferred over
letting the packet through because the user immediately sees packet
loss. Silently passing the packet through would hide the problem and
leave the user wondering why their redirect is not working.
The clsact fast path, tc_run() continues to call tcf_classify() directly
and is unaffected: TC_ACT_REDIRECT is returned as-is and handled by
sch_handle_egress/ingress() calling skb_do_redirect() as before.
Fixes: 27b29f6305 ("bpf: add bpf_redirect() helper")
Fixes: 401cb7dae8 ("net: Reference bpf_redirect_info via task_struct on PREEMPT_RT.")
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260706185609.330006-3-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rfcomm_tty_set_termios() tests dlc->session without rfcomm_mutex and
later passes the pointer to rfcomm_send_rpn(). The latter dereferences
both session->initiator and session->sock. Meanwhile, krfcommd can
unlink the DLC and free the session while holding rfcomm_mutex.
The race can proceed as follows:
TTY ioctl task krfcommd
-------------- --------
load dlc->session
enter rfcomm_send_rpn()
lock rfcomm_mutex
clear dlc->session
free session
unlock rfcomm_mutex
read session->initiator
KASAN reported:
BUG: KASAN: slab-use-after-free in rfcomm_send_rpn+0x297/0x2a0
Read of size 4 at addr ffff88810012a850 by task poc/92
Call Trace:
rfcomm_send_rpn+0x297/0x2a0
rfcomm_tty_set_termios+0x50d/0x850
tty_set_termios+0x596/0x950
set_termios+0x46a/0x6e0
tty_mode_ioctl+0x152/0xbd0
tty_ioctl+0x915/0x1240
__x64_sys_ioctl+0x134/0x1c0
Allocated by task 92:
rfcomm_session_add+0x9e/0x2e0
rfcomm_dlc_open+0x8b1/0xe00
rfcomm_dev_activate+0x85/0x1a0
rfcomm_tty_open+0x90/0x280
Freed by task 68:
kfree+0x131/0x3c0
rfcomm_session_del+0x119/0x180
rfcomm_run+0x737/0x4710
Add rfcomm_dlc_send_rpn(), which holds rfcomm_mutex while it verifies
that the DLC is still attached and sends the RPN frame. Have the TTY
path use the helper and drop its unlocked session check. This keeps the
session valid through both the frame construction and socket send.
Fixes: 3a5e903c09 ("[Bluetooth]: Implement RFCOMM remote port negotiation")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add a per-port debugfs boolean "tx_timeout_skip_reset" that, when
enabled, makes mana_tx_timeout() log the TX timeout and return without
queueing the per-port detach/attach recovery work.
This is a debug-only aid for bringup and qualification: skipping the
recovery reset keeps the device and queue state intact so a TX timeout
can be correlated with hardware telemetry. The knob defaults to false,
so production recovery behaviour is unchanged.
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260710132229.2851441-1-gargaditya@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The auth_hmacs array in struct sctp_cookie is supposed to store a complete
SCTP_AUTH_HMAC_ALGO parameter, which consists of a struct sctp_paramhdr
followed by N HMAC identifiers.
However, the array size was calculated using an extra 2 bytes instead of
sizeof(struct sctp_paramhdr), which is 4 bytes. When four HMAC identifiers
are configured, the HMAC-ALGO parameter stored in the endpoint is larger
than the auth_hmacs buffer in the cookie.
As a result, sctp_association_init() copies beyond the end of auth_hmacs
when initializing the association, corrupting the adjacent auth_chunks
field. This can lead to an invalid HMAC identifier being accepted and later
cause an out-of-bounds read in sctp_auth_get_hmac().
Fix the array size calculation by including the full SCTP parameter header
size.
Fixes: 1f485649f5 ("[SCTP]: Implement SCTP-AUTH internals")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <dstsmallbird@foxmail.com>
Reported-by: Zihan Xi <xizh2024@lzu.edu.cn>
Reported-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/634a0de0d5de29532915e6d47c92a0cbc206e03f.1783707155.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
MGMT_EV_DEVICE_DISCONNECTED carries a reason field which is defined to
be one of MGMT_DEV_DISCONN_* (0x00..0x05). hci_disconn_complete_evt()
converts the HCI error with hci_to_mgmt_reason(), but two other paths
pass the raw HCI error straight through:
hci_cs_disconnect() -> cp->reason
mgmt_connect_failed() -> status
The latter is reached whenever the adapter is powered off or suspended:
hci_disconnect_all_sync() aborts every link with
HCI_ERROR_REMOTE_POWER_OFF, hci_disconnect_sync() deliberately does not
wait for HCI_EV_DISCONN_COMPLETE for that reason, so that
hci_abort_conn_sync() finishes the connection off through
hci_conn_failed() instead.
As a result userspace sees an out of range reason:
@ MGMT Event: Device Disconnected (0x000c) plen 8
BR/EDR Address: 8C:A9:6F:2C:51:46
Reason: Reserved (0x15)
bluetoothd: btd_bearer_disconnected() Unknown disconnection value: 21
bluetoothd: device_disconnected() Unknown disconnection value: 21
Export hci_to_mgmt_reason() and use it in both places, so that a power
off is reported as MGMT_DEV_DISCONN_REMOTE rather than as the raw
HCI_ERROR_REMOTE_POWER_OFF (0x15).
Fixes: d47da6bd4c ("Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED")
Fixes: 182ee45da0 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When we need to unregister a netdev in a different netns, we will
delegate its unregistration to per-netns work.
There are three types of such cross-netns devices:
1. Paired devices (e.g., netkit, veth, vxcan)
-> Unregistering one device also deletes its peer, which
may reside in another netns.
2. Tunnel devices (e.g., bareudp, geneve, etc)
-> Destroying a netns removes devices in another netns if
their backend sockets reside in the dying netns
3. Stacked devices (e.g., ipvlan, macvlan, etc)
-> Removing the lower device also removes multiple upper
devices, each of which may reside in different namespaces.
In these cases, we will use unregister_netdevice_queue_net() to
queue such potential cross-netns devices for destruction.
Each driver must not call both unregister_netdevice_queue_net()
and unregister_netdevice_queue() for the same device. See the
subsequent veth/bareudp/ipvlan patches for how they avoid double
queueing.
unregister_netdevice_queue_net() takes net and dev. If dev resides
in the net, it simply calls unregister_netdevice_queue().
If dev_net(dev) is different from the net, it enqueues the device
to dev_net(dev)->dev_unreg_head and schedules the per-netns work.
When __rtnl_net_unlock() is called from the per-netns work (or another
thread already holding the lock), unregister_netdevice_many_net()
collects the queued devices and calls unregister_netdevice_many()
to perform the actual unregistration.
During netns dismantle, rtnl_net_flush_workqueue() is called at the
end of default_device_exit_batch() to ensure that cross-netns
devices in the other alive netns are unregistered.
Once RTNL is removed, a device could be moved to another netns while
being queued to net->dev_unreg_head.
__dev_change_net_namespace() handles this race by acquiring
net->dev_unreg_lock of both the old and new netns after dev_set_net()
and moving the device between their dev_unreg_head lists.
Since dev_set_net() and unregister_netdevice_queue_net() are
synchronised by netdev_lock(), the device is either queued to the
old netns's dev_unreg_head and then moved, or queued directly to
the new netns.
Note that unregister_netdevice_move_net() does not need to call
rtnl_net_queue_work() because __dev_change_net_namespace() is
(supposed to be) called with rtnl_net_lock(). (Not all callers
hold it yet, but the race does not happen until all callers
are converted and RTNL is removed.)
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260703001009.1572444-7-kuniyu@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The biggest blocker to per-netns RTNL is netdev unregistration.
It starts within a single netns (e.g., during a device lookup or
netns dismantle), but it can eventually involve multiple namespaces,
such as when upper ipvlan devices reside in different netns.
This prevents us from acquiring multiple rtnl_net_lock()s beforehand.
When we encounter such a cross-netns device, we must delegate the
unregistration to the work of the netns where the device actually
resides.
Let's add per-netns rtnl_work to support the deferred netdev
unregistration.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260703001009.1572444-4-kuniyu@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=k1zg
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2026-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2026-07-10
1) xfrm: propagate -EINPROGRESS from validate_xmit_xfrm()
Return -EINPROGRESS from xfrm_output_one when validate_xmit_xfrm
requeues the packet asynchronously, so the caller doesn't treat it
as a real error and free the skb.
2) xfrm: fix stale skb->prev after async crypto steals a GSO segment
Re-derive skb->prev from the fragment list after async crypto splits
a GSO skb, keeping the linked-list pointers validi.
3) xfrm: nat_keepalive: avoid double free on send error
Hold a state ref while the nat_keepalive timer is active and drop the
timer before freeing the state, preventing a re-entered free on send
error.
4) xfrm: fix sk_dst_cache double-free in xfrm_user_policy()
Null the skb dst cache before freeing the policy so a later skb
destructor doesn't double-free it.
5) xfrm: cache the offload ifindex for netlink dumps
Cache the device ifindex at state-add time and use it for netlink
dumps instead of dereferencing dst->dev, which may have changed by
the time the dump runs.
6) xfrm: reject optional IPTFS templates in outbound policies
Reject outbound policies with an optional IPTFS template,
IPTFS must always be used if configured.
7) xfrm: clear mode callbacks after failed mode setup
Clear the mode->init_flags and init_state callbacks on the error path
after xfrm_init_mode fails, so a partially-initialised mode isn't
reused in xfrm_state_construct.
8) xfrm: iptfs: propagate SKBFL_SHARED_FRAG in iptfs_skb_add_frags()
Propagate SKBFL_SHARED_FRAG from the original skb to fragments
allocated by iptfs_skb_add_frags, keeping shared-fragment accounting
correct after IPTFS reassembly.
9) xfrm6: clear dst.dev on error to avoid double netdev_put in xfrm6_fill_dst()
Clear dst->dev on the error path of xfrm6_fill_dst() so the caller
doesn't release the netdev reference twice via dst_release.
10) xfrm: policy: preallocate inexact bins before xfrm_hash_rebuild reinsert
Preallocate all inexact hash bins before existing entries are
reinserted during xfrm_hash_rebuild, so reinsertion always hits an
existing bin.
Please pull or let me know if there are problems.
ipsec-2026-07-10
* tag 'ipsec-2026-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: policy: preallocate inexact bins before xfrm_hash_rebuild reinsert
xfrm6: clear dst.dev on error to avoid double netdev_put in xfrm6_fill_dst()
xfrm: iptfs: propagate SKBFL_SHARED_FRAG in iptfs_skb_add_frags()
xfrm: clear mode callbacks after failed mode setup
xfrm: reject optional IPTFS templates in outbound policies
xfrm: cache the offload ifindex for netlink dumps
xfrm: fix sk_dst_cache double-free in xfrm_user_policy()
xfrm: nat_keepalive: avoid double free on send error
xfrm: fix stale skb->prev after async crypto steals a GSO segment
xfrm: propagate -EINPROGRESS from validate_xmit_xfrm()
====================
Link: https://patch.msgid.link/20260710090349.343389-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=/dia
-----END PGP SIGNATURE-----
Merge tag 'nf-26-07-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
The following patchset contains Netfilter fixes for *net*.
Most of these are LLM fixes for old issues flagged by sashiko/LLMs.
Many of these trigger drive-by-findings in sashiko. In particular:
- many load/store tearing and missing memory barriers, races
etc. in ipset, esp. with GC and resizing.
Keeping the proposed patches spinning for yet-another-iteration
keeps legit fixes back, so I prefer to add these now and follow
up with other reports later.
- flowtable work queue still has possible races with teardown,
but same rationale as with ipset: drive-by findings, not
problems coming with the flowtable IPIP changeset in this PR.
- ever since unreadable frag skb support was added in 6.12, we can no
longer do: BUG_ON(skb_copy_bits( ...): it will fire with such skbs.
Mina Almasry is looking at similar patterns elsewhere in the stack.
1) Guard skb->mac_header adjustment after IPv6 defragmentation in
nf_conntrack_reasm. From Xiang Mei.
2) NUL-terminate ebtables table names before calling find_table_lock() to
prevent stack-out-of-bounds reads. Also from Xiang Mei.
3) Zero the ebtables chainstack array, else error unwind may free bogus
pointer when CPU mask is sparse. All three issues date from 2.6 days.
4) Ensure ebtables module names are c-strings, same bug pattern as 2).
Bug added in 4.6.
5) Fix catchall element handling for inverted lookups in nft_lookup. Fold the
catchall lookup into ext before computing the match status. Was like
this ever since catchall elements got introduced in 5.13.
From Tamaki Yanagawa.
6-9) ipset updates from Jozsef Kadlecsik:
- mark rcu protected areas correctly
- address gc and resize clash in the comment extension
- add/del backlog cleanup in the error path
- allocate right size for the generic hash structure
10-12): IPIP flowtable updates from Pablo Neira Ayuso:
- Use the current direction's route when pushing IPIP headers
Fix incorrect headroom and fragmentation offset calculations.
- Avoid hardware offload for IPIP tunnels due to lack of driver support.
- Support IPIP tunnels with direct xmit in netfilter flowtable.
dst_cache and dst_cookie are moved outside the union to share route
state across flows. This is a followup to work done in 6.19 cycle.
13) Don't BUG() on skb_copy_bits error. Handle unreadable fragments by
either returning an error or restricting the copy operations to linear area,
This became an issue when unreable frag support was merged in 6.12.
14-16): IPVS updates from Yizhou Zhao:
- Pass parsed transport offset to IPVS state handlers.
update callback signatures.
- use correct transport header offset on state lookp in TCP.
As-is it was possible for ipv6 extension header data to be
treated as L4 header.
- same for SCTP. This was also broken since 2.6 days.
17) Ensure inner IP headers in ICMP errors are in the skb headroom after
stripping outer headers. Add more checks for the length of inner headers.
This was broken since 3.7 days.
From Julian Anastasov.
netfilter pull request nf-26-07-08
* tag 'nf-26-07-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
ipvs: ensure inner headers in ICMP errors are in headroom
ipvs: use parsed transport offset in SCTP state lookup
ipvs: use parsed transport offset in TCP state lookup
ipvs: pass parsed transport offset to state handlers
netfilter: handle unreadable frags
netfilter: flowtable: support IPIP tunnel with direct xmit
netfilter: flowtable: IPIP tunnel hardware offload is not yet support
netfilter: flowtable: use dst in this direction when pushing IPIP header
netfilter: ipset: allocate the proper memory for the generic hash structure
netfilter: ipset: cleanup the add/del backlog when resize failed
netfilter: ipset: exclude gc when resize is in progress
netfilter: ipset: mark the rcu locked areas properly
netfilter: nft_lookup: fix catchall element handling with inverted lookups
netfilter: ebtables: module names must be null-terminated
netfilter: ebtables: zero chainstack array
netfilter: ebtables: terminate table name before find_table_lock()
netfilter: nf_conntrack_reasm: guard mac_header adjustment after IPv6 defrag
====================
Link: https://patch.msgid.link/20260708140309.19633-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add Static and Dynamic Interrupt Moderation (DIM) support for
Rx and Tx.
Update queue creation procedure with new data struct with the related
settings.
Add functions to collect stat for DIM, and workers to update DIM data
and settings.
Update ethtool handler to get/set the moderation settings from a user.
To avoid detach/re-attach ops, ring DIM doorbell to change settings
at run time.
By default, adaptive-rx/tx (DIM) are enabled if supported by HW.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260702220123.815018-1-haiyangz@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
MANA allocates RX buffers from page pool fragments when frag_count is
greater than 1. In that case the buffers remain DMA mapped by page pool
and the RX completion path does not call dma_unmap_single(). As a result,
the implicit sync-for-CPU normally performed by dma_unmap_single() is
missing before the packet data is passed to the networking stack.
This breaks RX on configurations which require explicit DMA syncing, for
example when booted with swiotlb=force.
Fix this by recording the page pool page and DMA sync offset when the RX
buffer is allocated, and syncing the received packet range for CPU access
before handing the RX buffer to the stack.
Fixes: 730ff06d3f ("net: mana: Use page pool fragments for RX buffers instead of full pages to improve memory efficiency.")
Cc: stable@vger.kernel.org
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Link: https://patch.msgid.link/20260702041237.617719-3-decui@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
IPVS callers already parse the packet into struct ip_vs_iphdr before
updating connection state. For IPv6 this records the real
transport-header offset after extension headers in iph.len.
Pass this parsed transport offset through ip_vs_set_state() and the
protocol state_transition() callback so protocol handlers can use the
same packet context as scheduling and NAT handling. This patch only
changes the common callback plumbing and adapts the protocol callback
signatures; TCP and SCTP start using the value in follow-up patches.
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
The combination of IPIP tunnel with direct xmit, eg. bridge device,
breaks because no dst_entry is provided to check the skb headroom and to
set the iph->frag_off field. This leads to invalid dst usage and can
trigger a crash in the tunnel transmit path.
Fix this by moving dst_cache and dst_cookie out of the runtime union so
that they can be shared by neighbour, xfrm, and direct tunnel flows.
For FLOW_OFFLOAD_XMIT_DIRECT tuples carrying tunnel metadata, preserve
route state in these shared fields and release it through the common
dst release path.
Since dst_entry is now available to the three supported xmit modes and
dst_release() already deals with NULL dst, remove the xmit type check
in nft_flow_dst_release(). Moreover, skip the check if the dst entry
is NULL in nf_flow_dst_check() which is now the case for the direct
xmit case.
Based on patch from Rein Wei <n05ec@lzu.edu.cn>.
Fixes: d30301ba4b ("netfilter: flowtable: Add IPIP tx sw acceleration")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reported-by: Zhengyang Chen <chzhengyang2023@lzu.edu.cn>
Reported-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
No driver supports for IPIP tunnels yet, give up early on setting up the
hardware offload for this scenario.
This patch adds a stub that can be enhanced to add more configuration
that are currently not supported. As of now, the offload work is
enqueued to the worker, then ignored if the hardware offload
configuration is not supported.
Check the NF_FLOW_HW flag to know if this entry was already tried once
to be offloaded so this is not retried on refresh when unsupported. Move
NF_FLOW_HW flag check to nf_flow_offload_add(). If this NF_FLOW_HW flag
is unset the _del and _stats variants are never called.
This can be updated later on to skip hardware offload work to be queued
in case hardware offload does not support it.
Fixes: d98103575d ("netfilter: flowtable: Add IP6IP6 rx sw acceleration")
Fixes: ab427db178 ("netfilter: flowtable: Add IPIP rx sw acceleration")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reported-by: Zhengyang Chen <chzhengyang2023@lzu.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
A race condition exists between device teardown and incoming MLD query
processing, leading to a Use-After-Free in the MLD delayed work.
During device destruction, the primary reference to inet6_dev is dropped,
which can drop its refcount to 0. The actual freeing of inet6_dev memory
is deferred via RCU.
Concurrently, the packet receive path runs under RCU read lock and obtains
the inet6_dev pointer. Because the memory is RCU-protected, CPU-0 can
safely dereference inet6_dev even if its refcount has hit 0.
However, if CPU-0 calls igmp6_event_query() and schedules delayed work, it
attempts to acquire a reference using in6_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the inet6_dev memory is still scheduled to be freed after the RCU
grace period, the device is freed while the work is still scheduled.
When the work runs, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in6_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not schedule the work.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260705181756.963063-3-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The controller prefix (c<N>) in phys_port_name is currently restricted
to external host controllers. This layout sufficed when DPUs only had a
single local controller and one or more external host controllers.
However, newer devices can have multiple controllers within the DPU
itself, even within a single host environment. To support these
topologies, allow drivers to report the controller number regardless of
the "external" flag status. Any non-zero controller number will now be
explicitly reported, even for single-host or local DPU controllers.
Existing ports with controller=0 are unaffected.
Update documentation and kdoc to clarify that a non-zero controller
number does not require the external flag to be set.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260702111726.816985-2-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This commit makes use of the building blocks previously added to
implement cross-device rate nodes.
A new 'supported_cross_device_rate_nodes' bool is added to devlink_ops
which lets drivers advertise support for cross-device rate objects.
If enabled and if there is a common shared devlink instance, then:
- all rate objects will be stored in the top-most common nested instance
and
- rate objects can have parents from other devices sharing the same
common instance.
Storing rates in the common shared ancestor is safe, because it is
reference counted by its nested devlink instances, so it's guaranteed to
outlive them. Furthermore, the shared devlink infra guarantees a given
nested devlink hierarchy is managed by the same driver.
The parent devlink from info->ctx is not locked, so none of its mutable
fields can be used. But parent setting only requires comparing devlink
pointer comparisons. Additionally, since the shared devlink is locked,
other rate operations cannot concurrently happen.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260701073254.754518-8-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When CONFIG_IP_MULTIPLE_TABLES is disabled, fib_new_table()
is fib_get_table(), and no new table is created.
Let's move net->ipv4.fib_table_hash_lock under
CONFIG_IP_MULTIPLE_TABLES.
While at it, netns_ipv4_sysctl.rst is updated.
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260702044437.591864-2-kuniyu@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
nl80211_netlink_notify() walks the cfg80211 wireless device list when a
NETLINK_GENERIC socket is released. If the socket owns a connection, the
notifier queues the embedded wdev->disconnect_wk work item.
That work is a plain work_struct today. NETDEV_GOING_DOWN cancels it, but a
NETLINK_URELEASE notifier that already observed conn_owner_nlportid can
queue it after that cancel returns. _cfg80211_unregister_wdev() then
removes the wdev from the list and waits for RCU readers, but
synchronize_net() does not drain work queued by such a reader.
Make the autodisconnect work a wiphy_work instead. The callback already
needs the wiphy mutex, and wiphy_work runs under that mutex. This lets
teardown cancel pending autodisconnect work while holding the mutex,
without a cancel_work_sync() vs. worker locking concern.
Also cancel the wiphy work after list_del_rcu() and synchronize_net(). Any
NETLINK_URELEASE notifier that had already reached the wdev list has then
either queued the work and it is removed, or can no longer find the wdev.
Fixes: bd2522b168 ("cfg80211: NL80211_ATTR_SOCKET_OWNER support for CMD_CONNECT")
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Assisted-by: Codex:gpt-5.5
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Link: https://patch.msgid.link/20260706152418.779226-1-zzzccc427@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
