- allow dynamic sizing of the swiotlb buffer, to cater for secure
virtualization workloads that require all I/O to be bounce buffered
(Petr Tesarik)
- move a declaration to a header (Arnd Bergmann)
- check for memory region overlap in dma-contiguous (Binglei Wang)
- remove the somewhat dangerous runtime swiotlb-xen enablement and
unexport is_swiotlb_active (Christoph Hellwig, Juergen Gross)
- per-node CMA improvements (Yajun Deng)
-----BEGIN PGP SIGNATURE-----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=kVVr
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.6-2023-08-29' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-maping updates from Christoph Hellwig:
- allow dynamic sizing of the swiotlb buffer, to cater for secure
virtualization workloads that require all I/O to be bounce buffered
(Petr Tesarik)
- move a declaration to a header (Arnd Bergmann)
- check for memory region overlap in dma-contiguous (Binglei Wang)
- remove the somewhat dangerous runtime swiotlb-xen enablement and
unexport is_swiotlb_active (Christoph Hellwig, Juergen Gross)
- per-node CMA improvements (Yajun Deng)
* tag 'dma-mapping-6.6-2023-08-29' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: optimize get_max_slots()
swiotlb: move slot allocation explanation comment where it belongs
swiotlb: search the software IO TLB only if the device makes use of it
swiotlb: allocate a new memory pool when existing pools are full
swiotlb: determine potential physical address limit
swiotlb: if swiotlb is full, fall back to a transient memory pool
swiotlb: add a flag whether SWIOTLB is allowed to grow
swiotlb: separate memory pool data from other allocator data
swiotlb: add documentation and rename swiotlb_do_find_slots()
swiotlb: make io_tlb_default_mem local to swiotlb.c
swiotlb: bail out of swiotlb_init_late() if swiotlb is already allocated
dma-contiguous: check for memory region overlap
dma-contiguous: support numa CMA for specified node
dma-contiguous: support per-numa CMA for all architectures
dma-mapping: move arch_dma_set_mask() declaration to header
swiotlb: unexport is_swiotlb_active
x86: always initialize xen-swiotlb when xen-pcifront is enabling
xen/pci: add flag for PCI passthrough being possible
- Reorder struct pci_dev to avoid holes and reduce size (Christophe
JAILLET)
- Change pdev->rom_attr_enabled to single bit since it's only a boolean
value (Christophe JAILLET)
- Use struct_size() in pirq_convert_irt_table() instead of hand-writing it
(Christophe JAILLET)
- Explicitly include correct DT includes to untangle headers (Rob Herring)
- Fix a DOE race between destroy_work_on_stack() and the stack-allocated
task->work struct going out of scope in pci_doe() (Ira Weiny)
- Use pci_dev_id() when possible instead of manually composing ID from
dev->bus->number and dev->devfn (Xiongfeng Wang, Zheng Zengkai)
- Move pci_create_resource_files() declarations to linux/pci.h for alpha
build warnings (Arnd Bergmann)
- Remove unused hotplug function declarations (Yue Haibing)
- Remove unused mvebu struct mvebu_pcie.busn (Pali Rohár)
- Unexport pcie_port_bus_type (Bjorn Helgaas)
- Remove unnecessary sysfs ID local variable initialization (Bjorn Helgaas)
- Fix BAR value printk formatting to accommodate 32-bit values (Bjorn
Helgaas)
- Use consistent pointer types for config access syscall get_user() and
put_user() uses (Bjorn Helgaas)
- Simplify AER_RECOVER_RING_SIZE definition (Bjorn Helgaas)
- Simplify pci_pio_to_address() (Bjorn Helgaas)
- Simplify pci_dev_driver() (Bjorn Helgaas)
- Fix pci_bus_resetable(), pci_slot_resetable() name typos (Bjorn Helgaas)
- Fix code and doc typos and code formatting (Bjorn Helgaas)
- Tidy config space save/restore messages (Bjorn Helgaas)
* pci/misc:
PCI: Tidy config space save/restore messages
PCI: Fix code formatting inconsistencies
PCI: Fix typos in docs and comments
PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos
PCI: Simplify pci_dev_driver()
PCI: Simplify pci_pio_to_address()
PCI/AER: Simplify AER_RECOVER_RING_SIZE definition
PCI: Use consistent put_user() pointer types
PCI: Fix printk field formatting
PCI: Remove unnecessary initializations
PCI: Unexport pcie_port_bus_type
PCI: mvebu: Remove unused busn member
PCI: Remove unused function declarations
PCI/sysfs: Move declarations to linux/pci.h
PCI/P2PDMA: Use pci_dev_id() to simplify the code
PCI/IOV: Use pci_dev_id() to simplify the code
PCI/AER: Use pci_dev_id() to simplify the code
PCI: apple: Use pci_dev_id() to simplify the code
PCI/DOE: Fix destroy_work_on_stack() race
PCI: Explicitly include correct DT includes
x86/PCI: Use struct_size() in pirq_convert_irt_table()
PCI: Change pdev->rom_attr_enabled to single bit
PCI: Reorder pci_dev fields to reduce holes
- Add support for Switechtec PCIe Gen5 devices (Kelvin Cao)
* pci/controller/switchtec:
PCI: switchtec: Add support for PCIe Gen5 devices
PCI: switchtec: Use normal comment style
- Use Use devm_platform_get_and_ioremap_resource() instead of open-coding
platform_get_resource() followed by devm_ioremap_resource() (Yang Li)
* pci/controller/resources:
PCI: imx6: Use devm_platform_get_and_ioremap_resource()
PCI: xgene-msi: Use devm_platform_get_and_ioremap_resource()
PCI: v3: Use devm_platform_get_and_ioremap_resource()
PCI: rcar-gen2: Use devm_platform_get_and_ioremap_resource()
- Add stubs for devm action functions that call clk_disable_unprepare() to
avoid casts between incompatible function types (Krzysztof Wilczyński)
* pci/controller/remove-void-cast:
PCI: microchip: Remove cast between incompatible function type
PCI: keembay: Remove cast between incompatible function type
PCI: meson: Remove cast between incompatible function type
- Fix disable of bridge windows during domain reset; previously we cleared
the base/limit registers, which left the windows enabled (Nirmal Patel)
* pci/controller/vmd:
PCI: vmd: Disable bridge window for domain reset
- Revert "PCI: tegra194: Enable support for 256 Byte payload" because Linux
doesn't know how to reduce MPS from to 256 to 128 bytes for Endpoints
below a Switch (because other devices below the Switch might already be
operating), which leads to Malformed TLP errors (Vidya Sagar)
* pci/controller/tegra194:
Revert "PCI: tegra194: Enable support for 256 Byte payload"
- Use 64-bit mask on MSI 64-bit PCI address to avoid zeroing out the upper
32 bits (Rick Wertenbroek)
* pci/controller/rockchip:
PCI: rockchip: Use 64-bit mask on MSI 64-bit PCI address
- Pass the Qcom Endpoint 4K alignment requirement for outbound windows to
the EPF core so EPF drivers can use it (Manivannan Sadhasivam)
- Use alignment restriction from EPF core in Qcom EPF MHI driver
(Manivannan Sadhasivam)
- Add Qcom Endpoint eDMA support by enabling the eDMA IRQ (Manivannan
Sadhasivam)
- Add Qcom MHI eDMA support (Manivannan Sadhasivam)
- Add Qcom Snapdragon SM8450 support to the EPF MHI driver (Manivannan
Sadhasivam)
- Use iATU for EPF MHI transfers smaller than 4K to avoid eDMA setup
latency (Manivannan Sadhasivam)
- Add pci_epc_mem_init() kernel-doc (Manivannan Sadhasivam)
* pci/controller/qcom-edma:
PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API
PCI: epf-mhi: Use iATU for small transfers
PCI: epf-mhi: Add support for SM8450
PCI: epf-mhi: Add eDMA support
PCI: qcom-ep: Add eDMA support
PCI: epf-mhi: Make use of the alignment restriction from EPF core
PCI: qcom-ep: Pass alignment restriction to the EPF core
- Configure controller so MHI bus master clock will be switched off while
in ASPM L1.x states (Manivannan Sadhasivam)
- Add sa8775p DT binding and driver support (Mrinmay Sarkar)
- Fix broken DT SDX65 "compatible" property (Krzysztof Kozlowski)
* pci/controller/qcom:
dt-bindings: PCI: qcom: Fix SDX65 compatible
PCI: qcom: Add support for sa8775p SoC
dt-bindings: PCI: qcom: Add sa8775p compatible
PCI: qcom-ep: Switch MHI bus master clock off during L1SS
- Fix DED and SEC interrupt bit offsets so interrupt handlers work
correctly (Daire McNamara)
- Make driver buildable as a module (Daire McNamara)
- Reorganize register #defines to align with hardware docs (Daire McNamara)
- Tweak register accessors to simplify callers (Daire McNamara)
- Refactor interrupt initialisation (Daire McNamara)
- Read FPGA MSI configuration parameters from hardware instead of
hard-coding them (Daire McNamara)
- Re-partition code between probe() and init() (Daire McNamara)
* pci/controller/microchip:
PCI: microchip: Re-partition code between probe() and init()
PCI: microchip: Gather MSI information from hardware config registers
PCI: microchip: Clean up initialisation of interrupts
PCI: microchip: Enable event handlers to access bridge and control pointers
PCI: microchip: Align register, offset, and mask names with HW docs
PCI: microchip: Enable building driver as a module
PCI: microchip: Correct the DED and SEC interrupt bit offsets
- Add support for link-down notification so the endpoint driver can process
LINK_DOWN events (Frank Li)
- Save Link Capabilities during probe so they can be restored when handling
a link-up event, since the controller loses the Link Width and Link Speed
values during reset (Xiaowei Bao)
* pci/controller/layerscape:
PCI: layerscape: Add workaround for lost link capabilities during reset
PCI: layerscape: Add support for link-down notification
- Use of_property_read_bool() instead of low-level accessors for boolean
properties (Rob Herring)
* pci/controller/iproc:
PCI: iproc: Use of_property_read_bool() for boolean properties
- To avoid a NULL pointer dereference, skip MSI restore after hibernate if
MSI/MSI-X hasn't been enabled (Dexuan Cui)
* pci/controller/hv:
PCI: hv: Fix a crash in hv_pci_restore_msi_msg() during hibernation
- Set the supported number of MSI vectors so we can use all available MSI
interrupts (Yong-Xuan Wang)
* pci/controller/fu740:
PCI: fu740: Set the number of MSI vectors
- Add an imx6 .host_deinit() callback so we can clean up things like
regulators on probe failure or driver unload (Mark Brown)
- Add PCIE_PME_TO_L2_TIMEOUT_US value for controller drivers that need to
manually synchronize power removal (Frank Li)
- Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and
dw_pcie_resume_noirq()) to be called by controller driver suspend/resume
ops, and a controller callback to send PME_Turn_Off (Frank Li)
- Add layerscape suspend/resume support, including manual
PME_Turn_off/PME_TO_Ack handshake (Hou Zhiqiang, Frank Li)
* pci/controller/dwc:
PCI: layerscape: Add power management support for ls1028a
PCI: dwc: Implement generic suspend/resume functionality
PCI: Add PCIE_PME_TO_L2_TIMEOUT_US L2 ready timeout value
PCI: dwc: Provide deinit callback for i.MX
- Assert PERST# when probing BCM2711 because some bootloaders don't do it
(Jim Quinlan)
* pci/controller/brcmstb:
PCI: brcmstb: Remove stale comment
PCI: brcmstb: Assert PERST# on BCM2711
- Ensure device is accessible before VPD access via sysfs (Alex Williamson)
- Ensure device doesn't go to a low-power state while we're polling for PME
(Alex Williamson)
* pci/vpd:
PCI: Fix runtime PM race with PME polling
PCI/VPD: Add runtime power management to sysfs interface
- Avoid bus resets on NVIDIA T4 GPUs because they don't seem to recover (Wu
Zongyong)
* pci/virtualization:
PCI: Mark NVIDIA T4 GPUs to avoid bus reset
- Only read PCI_PM_CTRL register when available, to avoid reading the wrong
register and corrupting dev->current_state (Feiyang Chen)
* pci/pm:
PCI/PM: Only read PCI_PM_CTRL register when available
- Add locking for read/modify/write PCIe Capability Register accessors for
Link Control and Root Control (Ilpo Järvinen)
- Use PCIe RMW accessors for Link Control updates in PCI core, pciehp,
amdgpu, radeon, mlx5, ath10k, ath11k, ath12k (Ilpo Järvinen)
- Convert PCIBIOS error values in mlx5 to generic errnos (Ilpo Järvinen)
- Simplify pcie_capability_clear_and_set_word() control flow (Bjorn
Helgaas)
* pci/pcie-rmw:
PCI: Simplify pcie_capability_clear_and_set_word() control flow
net/mlx5: Convert PCI error values to generic errnos
PCI: Document the Capability accessor RMW improvements
wifi: ath10k: Use RMW accessors for changing LNKCTL
wifi: ath12k: Use RMW accessors for changing LNKCTL
wifi: ath11k: Use RMW accessors for changing LNKCTL
net/mlx5: Use RMW accessors for changing LNKCTL
drm/radeon: Use RMW accessors for changing LNKCTL
drm/amdgpu: Use RMW accessors for changing LNKCTL
PCI/ASPM: Use RMW accessors for changing LNKCTL
PCI: pciehp: Use RMW accessors for changing LNKCTL
PCI: Make link retraining use RMW accessors for changing LNKCTL
PCI: Add locking to RMW PCI Express Capability Register accessors
- Make I/O resources depend on CONFIG_HAS_IOPORT so inw() and friends can
be completely omitted on architectures without I/O port support (Niklas
Schnelle)
* pci/ioport:
PCI/sysfs: Make I/O resource depend on HAS_IOPORT
PCI: Make quirk using inw() depend on HAS_IOPORT
Add support for voting interconnect (ICC) bandwidth based
on the link speed and width.
This commit is inspired from the basic interconnect support added
to pcie-qcom driver in commit c4860af88d ("PCI: qcom: Add basic
interconnect support").
The interconnect support is kept optional to be backward compatible
with legacy device trees.
[kwilczynski: add missing kernel-doc for the icc_mem variable]
Link: https://lore.kernel.org/linux-pci/1689751218-24492-5-git-send-email-quic_krichai@quicinc.com
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Sometimes, the Qcom PCIe EP controller can receive some interrupts
unknown to the driver, like safety interrupts in newer SoCs. In those
cases, if the driver doesn't clear the interrupts, it will end up in an
interrupt storm. However, the users will not know about it because the
log is treated as a debug message.
So let's treat the unknown event log as an error so that it at least
makes the user aware, thereby getting fixed eventually.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230726152931.18134-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
For transfers below 4K, let's use iATU since using eDMA for such small
transfers is inefficient.
This is mainly because setting up an eDMA transfer and waiting for
completion adds some latency. This latency is negligible for large
transfers but not for the smaller ones.
With using iATU, there is an increase in ~50Mbps throughput on both MHI
UL (Uplink) and DL (Downlink) channels.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230717065459.14138-7-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Add support for Qualcomm Snapdragon SM8450 SoC to the EPF driver. SM8450
has the dedicated PID (0x0306) and supports eDMA. Currently, it has no
fixed PCI class, so it is being advertised as "PCI_CLASS_OTHERS".
Link: https://lore.kernel.org/linux-pci/20230717065459.14138-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Add support for Embedded DMA (eDMA) available in the DesignWare PCIe IP
to transfer the MHI buffers between the host and the endpoint. The eDMA
use helps achieve greater throughput as the transfers are offloaded from
CPUs.
For differentiating the iATU and eDMA APIs, the pci_epf_mhi_{read/write}
APIs are renamed to pci_epf_mhi_iatu_{read/write} and separate eDMA
specific APIs pci_epf_mhi_edma_{read/write} are introduced.
Platforms that require eDMA support can pass the MHI_EPF_USE_DMA flag
through pci_epf_mhi_ep_info.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230717065459.14138-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Qualcomm PCIe Endpoint controllers have the in-built Embedded DMA (eDMA)
peripheral for offloading the data transfer between the PCIe bus and
memory.
Let's add support for it by enabling the eDMA IRQ in the driver. The
eDMA DMA Engine driver will handle the rest of the functionality.
Since the eDMA on Qualcomm platforms only uses a single IRQ for all
channels, use 1 for edma.nr_irqs.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230717065459.14138-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
For a device with no Power Management Capability, pci_power_up() previously
returned 0 (success) if the platform was able to put the device in D0,
which led to pci_set_full_power_state() trying to read PCI_PM_CTRL, even
though it doesn't exist.
Since dev->pm_cap == 0 in this case, pci_set_full_power_state() actually
read the wrong register, interpreted it as PCI_PM_CTRL, and corrupted
dev->current_state. This led to messages like this in some cases:
pci 0000:01:00.0: Refused to change power state from D3hot to D0
To prevent this, make pci_power_up() always return a negative failure code
if the device lacks a Power Management Capability, even if non-PCI platform
power management has been able to put the device in D0. The failure will
prevent pci_set_full_power_state() from trying to access PCI_PM_CTRL.
Fixes: e200904b27 ("PCI/PM: Split pci_power_up()")
Link: https://lore.kernel.org/r/20230824013738.1894965-1-chenfeiyang@loongson.cn
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: stable@vger.kernel.org # v5.19+
Qcom PCIe EP controllers have 4K alignment restriction for the outbound
window address. Hence, pass this info to the EPF core so that the EPF
drivers can make use of this info.
Link: https://lore.kernel.org/linux-pci/20230717065459.14138-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Return early for errors in pcie_capability_clear_and_set_word_unlocked()
and pcie_capability_clear_and_set_dword() to simplify the control flow.
No functional change intended.
Link: https://lore.kernel.org/r/20230824193712.542167-13-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Update config space save/restore debug messages so they line up better.
Previously:
nvme 0000:05:00.0: saving config space at offset 0x4 (reading 0x20100006)
nvme 0000:05:00.0: saving config space at offset 0x8 (reading 0x1080200)
nvme 0000:05:00.0: saving config space at offset 0xc (reading 0x0)
nvme 0000:05:00.0: restoring config space at offset 0x4 (was 0x0, writing 0x20100006)
Now:
nvme 0000:05:00.0: save config 0x04: 0x20100006
nvme 0000:05:00.0: save config 0x08: 0x01080200
nvme 0000:05:00.0: save config 0x0c: 0x00000000
nvme 0000:05:00.0: restore config 0x04: 0x00000000 -> 0x20100006
No functional change intended. Enable these messages by setting
CONFIG_DYNAMIC_DEBUG=y and adding 'dyndbg="file drivers/pci/* +p"'
to kernel parameters.
Link: https://lore.kernel.org/r/20230823191831.476579-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Remove unnecessary "return;" in void functions and format consistently.
No functional change intended.
Link: https://lore.kernel.org/r/20230824193712.542167-12-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fix typos in the pci_bus_resetable() and pci_slot_resetable() function
names. No functional change intended.
Link: https://lore.kernel.org/r/20230824193712.542167-10-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Simplify pci_dev_driver() by removing the "else". The "if" case always
returns, so the "else" is superfluous. No functional change intended.
Link: https://lore.kernel.org/r/20230824193712.542167-9-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Simplify pci_pio_to_address() by removing an unnecessary local variable.
No functional change intended.
Link: https://lore.kernel.org/r/20230824193712.542167-8-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
ACPI Platform Error Interfaces (APEI) convey error information to the OS.
If the APEI GHES driver receives information about PCI errors, it queues it
in aer_recover_ring for processing by the PCI AER code.
AER_RECOVER_RING_SIZE is the size of the aer_recover_ring FIFO and is
arbitrary, with no direct connection to hardware.
AER_RECOVER_RING_ORDER was only used to compute AER_RECOVER_RING_SIZE.
Remove it and define AER_RECOVER_RING_SIZE directly. No functional change
intended.
Link: https://lore.kernel.org/r/20230824193712.542167-7-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
We used u8, u16, and u32 for get_user() pointer types, but "unsigned char",
"unsigned short", and "unsigned int" for put_user().
Use u8, u16, and u32 for put_user() for consistency. No functional change
intended.
Link: https://lore.kernel.org/r/20230824193712.542167-6-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Previously we used "%#08x" to print a 32-bit value. This fills an
8-character field with "0x...", but of course many 32-bit values require a
10-character field "0x12345678" for this format. Fix the formats to avoid
confusion.
Link: https://lore.kernel.org/r/20230824193712.542167-5-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
We always assign "fields" immediately, so remove the unnecessary
initializations. No functional change intended.
Link: https://lore.kernel.org/r/20230824193712.542167-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
pcie_port_bus_type is used only in pci-driver.c and pcie/portdrv_core.c and
pcie/portdrv_pci.c. None of these can be built as modules, so
pcie_port_bus_type doesn't need to be exported. Unexport it.
Link: https://lore.kernel.org/r/20230824193712.542167-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The busn member of struct mvebu_pcie is unused, so drop it.
Link: https://lore.kernel.org/r/20220905192310.22786-5-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The following declarations have never been implemented since the beginning
of git history, so remove them:
u8 acpiphp_get_attention_status(struct acpiphp_slot *slot);
u8 cpci_get_latch_status(struct slot *slot);
u8 cpci_get_adapter_status(struct slot *slot);
int ibmphp_get_total_hp_slots(void);
void ibmphp_free_ibm_slot(struct slot *);
void pdev_enable_device(struct pci_dev *);
Link: https://lore.kernel.org/r/20230811095933.28652-1-yuehaibing@huawei.com
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
A comment says that Multi-MSI is not supported by the driver.
A past commit [1] added this feature, so the comment is
incorrect and is removed.
[1] commit 198acab177 ("PCI: brcmstb: Enable Multi-MSI")
Link: https://lore.kernel.org/r/20230623144100.34196-6-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
The current PCIe driver assumes PERST# is asserted when probe() is invoked.
Some older versions of the 2711/RPi bootloader left PERST# unasserted, as
the Raspian OS does assert PERST# on probe(). For this reason, we assert
PERST# for BCM2711 SOCs (i.e. RPi).
Link: https://lore.kernel.org/r/20230623144100.34196-5-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Add PME_Turn_off/PME_TO_Ack handshake sequence for ls1028a platform.
Implemented on top of common dwc dw_pcie_suspend(resume)_noirq()
functions to handle system enter/exit suspend states.
Link: https://lore.kernel.org/r/20230821184815.2167131-4-Frank.Li@nxp.com
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Introduce an helper function (dw_pcie_get_ltssm()) to retrieve
SMLH_LTSS_STATE.
Add common dw_pcie_suspend(resume)_noirq() API to implement the DWC
controller generic suspend/resume functionality.
Add a controller specific callback to send the PME_Turn_Off message
(ie .pme_turn_off) for controller platform specific PME handling.
Link: https://lore.kernel.org/r/20230821184815.2167131-3-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[lpieralisi@kernel.org: commit log]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Add the PCIE_PME_TO_L2_TIMEOUT_US macro to define the L2 ready timeout
as described in the PCI specifications.
Link: https://lore.kernel.org/r/20230821184815.2167131-2-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
The endpoint controller loses the Maximum Link Width and Supported Link Speed
value from the Link Capabilities Register - initially configured by the Reset
Configuration Word (RCW) - during a link-down or hot reset event.
Address this issue in the endpoint event handler.
Link: https://lore.kernel.org/r/20230720135834.1977616-2-Frank.Li@nxp.com
Fixes: a805770d8a ("PCI: layerscape: Add EP mode support")
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Add support to pass link-down notification to the endpoint function
driver so that it can process the LINK_DOWN event.
Link: https://lore.kernel.org/r/20230720135834.1977616-1-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reorganize vga_client_register() to avoid the goto and the need to save the
return value. Update the kernel-doc to reflect -ENODEV on failure. No
functional change intended.
[bhelgaas: drop "ret" variable, commit log]
Link: https://lore.kernel.org/r/20230808223412.1743176-8-sui.jingfeng@linux.dev
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
In vga_arbiter_notify_clients(), "new_state" was computed during every loop
iteration even though it doesn't depend on anything that changes during the
loop. Move the computation outside the loop.
[bhelgaas: drop renames that obscure the purpose, commit log]
Link: https://lore.kernel.org/r/20230808223412.1743176-6-sui.jingfeng@linux.dev
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Previously vga_update_device_decodes() took "int new_decodes", but the
callers pass "unsigned int new_decodes". Correct the
vga_update_device_decodes() parameter type to "unsigned int" to match.
In vga_arbiter_notify_clients(), the return from vgadev->set_decode() is
"unsigned int" but was stored as "uint32_t new_decodes". Correct the
new_decodes type to "unsigned int".
[bhelgaas: use correct type for ->set_decode() return, commit log]
Link: https://lore.kernel.org/r/20230808223412.1743176-5-sui.jingfeng@linux.dev
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Previously vga_str_to_iostate() took "int *io_state", but vga_arb_write()
is the only caller and it passes "unsigned int *". Make the
vga_str_to_iostate() parameter type "unsigned int *" to match.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230808223412.1743176-2-sui.jingfeng@linux.dev
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The iMSI-RX module of the DW PCIe controller provides multiple sets of
MSI_CTRL_INT_i_* registers, and each set is capable of handling 32 MSI
interrupts. However, the fu740 PCIe controller driver only enabled one set
of MSI_CTRL_INT_i_* registers, as the total number of supported interrupts
was not specified.
Set the supported number of MSI vectors to enable all the MSI_CTRL_INT_i_*
registers on the fu740 PCIe core, allowing the system to fully utilize the
available MSI interrupts.
Link: https://lore.kernel.org/r/20230807055621.2431-1-yongxuan.wang@sifive.com
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
pci_dt_testdrv is bound to QEMU PCI Test Device. It reads
overlay_pci_node fdt fragment and apply it to Test Device. Then it
calls of_platform_default_populate() to populate the platform
devices.
Tested-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/1692120000-46900-6-git-send-email-lizhi.hou@amd.com
Signed-off-by: Rob Herring <robh@kernel.org>
The Xilinx Alveo U50 PCI card exposes multiple hardware peripherals on
its PCI BAR. The card firmware provides a flattened device tree to
describe the hardware peripherals on its BARs. This allows U50 driver to
load the flattened device tree and generate the device tree node for
hardware peripherals underneath.
To generate device tree node for U50 card, add PCI quirks to call
of_pci_make_dev_node() for U50.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/1692120000-46900-4-git-send-email-lizhi.hou@amd.com
Signed-off-by: Rob Herring <robh@kernel.org>
The PCI endpoint device such as Xilinx Alveo PCI card maps the register
spaces from multiple hardware peripherals to its PCI BAR. Normally,
the PCI core discovers devices and BARs using the PCI enumeration process.
There is no infrastructure to discover the hardware peripherals that are
present in a PCI device, and which can be accessed through the PCI BARs.
Apparently, the device tree framework requires a device tree node for the
PCI device. Thus, it can generate the device tree nodes for hardware
peripherals underneath. Because PCI is self discoverable bus, there might
not be a device tree node created for PCI devices. Furthermore, if the PCI
device is hot pluggable, when it is plugged in, the device tree nodes for
its parent bridges are required. Add support to generate device tree node
for PCI bridges.
Add an of_pci_make_dev_node() interface that can be used to create device
tree node for PCI devices.
Add a PCI_DYNAMIC_OF_NODES config option. When the option is turned on,
the kernel will generate device tree nodes for PCI bridges unconditionally.
Initially, add the basic properties for the dynamically generated device
tree nodes which include #address-cells, #size-cells, device_type,
compatible, ranges, reg.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/1692120000-46900-3-git-send-email-lizhi.hou@amd.com
Signed-off-by: Rob Herring <robh@kernel.org>
When a Linux VM with an assigned PCI device runs on Hyper-V, if the PCI
device driver is not loaded yet (i.e. MSI-X/MSI is not enabled on the
device yet), doing a VM hibernation triggers a panic in
hv_pci_restore_msi_msg() -> msi_lock_descs(&pdev->dev), because
pdev->dev.msi.data is still NULL.
Avoid the panic by checking if MSI-X/MSI is enabled.
Link: https://lore.kernel.org/r/20230816175939.21566-1-decui@microsoft.com
Fixes: dc2b453290 ("PCI: hv: Rework MSI handling")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: sathyanarayanan.kuppuswamy@linux.intel.com
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
During domain reset process vmd_domain_reset() clears PCI
configuration space of VMD root ports. But certain platform
has observed following errors and failed to boot.
...
DMAR: VT-d detected Invalidation Queue Error: Reason f
DMAR: VT-d detected Invalidation Time-out Error: SID ffff
DMAR: VT-d detected Invalidation Completion Error: SID ffff
DMAR: QI HEAD: UNKNOWN qw0 = 0x0, qw1 = 0x0
DMAR: QI PRIOR: UNKNOWN qw0 = 0x0, qw1 = 0x0
DMAR: Invalidation Time-out Error (ITE) cleared
The root cause is that memset_io() clears prefetchable memory base/limit
registers and prefetchable base/limit 32 bits registers sequentially.
This seems to be enabling prefetchable memory if the device disabled
prefetchable memory originally.
Here is an example (before memset_io()):
PCI configuration space for 10000:00:00.0:
86 80 30 20 06 00 10 00 04 00 04 06 00 00 01 00
00 00 00 00 00 00 00 00 00 01 01 00 00 00 00 20
00 00 00 00 01 00 01 00 ff ff ff ff 75 05 00 00
...
So, prefetchable memory is ffffffff00000000-575000fffff, which is
disabled. When memset_io() clears prefetchable base 32 bits register,
the prefetchable memory becomes 0000000000000000-575000fffff, which is
enabled and incorrect.
Here is the quote from section 7.5.1.3.9 of PCI Express Base 6.0 spec:
The Prefetchable Memory Limit register must be programmed to a smaller
value than the Prefetchable Memory Base register if there is no
prefetchable memory on the secondary side of the bridge.
This is believed to be the reason for the failure and in addition the
sequence of operation in vmd_domain_reset() is not following the PCIe
specs.
Disable the bridge window by executing a sequence of operations
borrowed from pci_disable_bridge_window() and pci_setup_bridge_io(),
that comply with the PCI specifications.
Link: https://lore.kernel.org/r/20230810215029.1177379-1-nirmal.patel@linux.intel.com
Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
When certain PHB HW failure causes pHyp to recover PHB, it marks the PE
state as temporarily unavailable until recovery is complete. This also
triggers an EEH handler in Linux which needs to notify drivers, and perform
recovery. But before notifying the driver about the PCI error it uses
get_adapter_status()->rpaphp_get_sensor_state()->rtas_call(get-sensor-state)
operation of the hotplug_slot to determine if the slot contains a device or
not. If the slot is empty, the recovery is skipped entirely.
eeh_event_handler()
->eeh_handle_normal_event()
->eeh_slot_presence_check()
->get_adapter_status()
->rpaphp_get_sensor_state()
->rtas_get_sensor()
->rtas_call(get-sensor-state)
However on certain PHB failures, the RTAS call rtas_call(get-sensor-state)
returns extended busy error (9902) until PHB is recovered by pHyp. Once PHB
is recovered, the rtas_call(get-sensor-state) returns success with correct
presence status. The RTAS call interface rtas_get_sensor() loops over the
RTAS call on extended delay return code (9902) until the return value is
either success (0) or error (-1). This causes the EEH handler to get stuck
for ~6 seconds before it could notify that the PCI error has been detected
and stop any active operations. Hence with running I/O traffic, during this
6 seconds, the network driver continues its operation and hits a timeout
(netdev watchdog).
------------
[52732.244731] DEBUG: ibm_read_slot_reset_state2()
[52732.244762] DEBUG: ret = 0, rets[0]=5, rets[1]=1, rets[2]=4000, rets[3]=>
[52732.244798] DEBUG: in eeh_slot_presence_check
[52732.244804] DEBUG: error state check
[52732.244807] DEBUG: Is slot hotpluggable
[52732.244810] DEBUG: hotpluggable ops ?
[52732.244953] DEBUG: Calling ops->get_adapter_status
[52732.244958] DEBUG: calling rpaphp_get_sensor_state
[52736.564262] ------------[ cut here ]------------
[52736.564299] NETDEV WATCHDOG: enP64p1s0f3 (tg3): transmit queue 0 timed o>
[52736.564324] WARNING: CPU: 1442 PID: 0 at net/sched/sch_generic.c:478 dev>
[...]
[52736.564505] NIP [c000000000c32368] dev_watchdog+0x438/0x440
[52736.564513] LR [c000000000c32364] dev_watchdog+0x434/0x440
------------
On timeouts, network driver starts dumping debug information to console
(e.g bnx2 driver calls bnx2x_panic_dump()), and go into recovery path while
pHyp is still recovering the PHB. As part of recovery, the driver tries to
reset the device and it keeps failing since every PCI read/write returns
ff's. And when EEH recovery kicks-in, the driver is unable to recover the
device. This impacts the ssh connection and leads to the system being
inaccessible. To get the NIC working again it needs a reboot or re-assign
the I/O adapter from HMC.
[ 9531.168587] EEH: Beginning: 'slot_reset'
[ 9531.168601] PCI 0013:01:00.0#10000: EEH: Invoking bnx2x->slot_reset()
[...]
[ 9614.110094] bnx2x: [bnx2x_func_stop:9129(enP19p1s0f0)]FUNC_STOP ramrod failed. Running a dry transaction
[ 9614.110300] bnx2x: [bnx2x_igu_int_disable:902(enP19p1s0f0)]BUG! Proper val not read from IGU!
[ 9629.178067] bnx2x: [bnx2x_fw_command:3055(enP19p1s0f0)]FW failed to respond!
[ 9629.178085] bnx2x 0013:01:00.0 enP19p1s0f0: bc 7.10.4
[ 9629.178091] bnx2x: [bnx2x_fw_dump_lvl:789(enP19p1s0f0)]Cannot dump MCP info while in PCI error
[ 9644.241813] bnx2x: [bnx2x_io_slot_reset:14245(enP19p1s0f0)]IO slot reset --> driver unload
[...]
[ 9644.241819] PCI 0013:01:00.0#10000: EEH: bnx2x driver reports: 'disconnect'
[ 9644.241823] PCI 0013:01:00.1#10000: EEH: Invoking bnx2x->slot_reset()
[ 9644.241827] bnx2x: [bnx2x_io_slot_reset:14229(enP19p1s0f1)]IO slot reset initializing...
[ 9644.241916] bnx2x 0013:01:00.1: enabling device (0140 -> 0142)
[ 9644.258604] bnx2x: [bnx2x_io_slot_reset:14245(enP19p1s0f1)]IO slot reset --> driver unload
[ 9644.258612] PCI 0013:01:00.1#10000: EEH: bnx2x driver reports: 'disconnect'
[ 9644.258615] EEH: Finished:'slot_reset' with aggregate recovery state:'disconnect'
[ 9644.258620] EEH: Unable to recover from failure from PHB#13-PE#10000.
[ 9644.261811] EEH: Beginning: 'error_detected(permanent failure)'
[...]
[ 9644.261823] EEH: Finished:'error_detected(permanent failure)'
Hence, it becomes important to inform driver about the PCI error detection
as early as possible, so that driver is aware of PCI error and waits for
EEH handler's next action for successful recovery.
Current implementation uses rtas_get_sensor() API which blocks the slot
check state until RTAS call returns success. To avoid this, fix the PCI
hotplug driver (rpaphp) to return an error (-EBUSY) if the slot presence
state can not be detected immediately while PE is in EEH recovery state.
Change rpaphp_get_sensor_state() to invoke rtas_call(get-sensor-state)
directly only if the respective PE is in EEH recovery state, and take
actions based on RTAS return status. This way EEH handler will not be
blocked on rpaphp_get_sensor_state() and can immediately notify driver
about the PCI error and stop any active operations.
In normal cases (non-EEH case) rpaphp_get_sensor_state() will continue to
invoke rtas_get_sensor() as it was earlier with no change in existing
behavior.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/169235815601.193557.13989873835811325343.stgit@jupiter
When we have a struct pci_dev *, use pci_dev_id() instead of manually
composing the ID from dev->bus->number and dev->devfn.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230811111057.31900-1-zhengzengkai@huawei.com
Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Testing that a device is not currently in a low power state provides no
guarantees that the device is not imminently transitioning to such a state.
Increment the PM usage counter before accessing the device. Since we don't
wish to wake the device for PME polling, do so only if the device is
already active by using pm_runtime_get_if_active().
Link: https://lore.kernel.org/r/20230803171233.3810944-3-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Unlike default access to config space through sysfs, the VPD read and write
functions don't actively manage the runtime power management state of the
device during access. Since commit 7ab5e10eda ("vfio/pci: Move the
unused device into low power state with runtime PM"), the vfio-pci driver
will use runtime power management and release unused devices to make use of
low power states. Attempting to access VPD information in D3cold can
result in incorrect information or kernel crashes depending on the system
behavior.
Wrap the VPD read/write bin attribute handlers in runtime PM and take into
account the potential quirk to select the correct device to wake.
Link: https://lore.kernel.org/r/20230803171233.3810944-2-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
[bhelgaas: tweak pci_dev_put() test to match the pci_get_func0_dev() test]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-----BEGIN PGP SIGNATURE-----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=/0Ra
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.5-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Add Manivannan Sadhasivam as DesignWare PCIe driver co-maintainer
(Krzysztof Wilczyński)
- Revert "PCI: dwc: Wait for link up only if link is started" to fix a
regression on Qualcomm platforms that don't reach interconnect sync
state if the slot is empty (Johan Hovold)
- Revert "PCI: mvebu: Mark driver as BROKEN" so people can use
pci-mvebu even though some others report problems (Bjorn Helgaas)
- Avoid a NULL pointer dereference when using acpiphp for root bus
hotplug to fix a regression added in v6.5-rc1 (Igor Mammedov)
* tag 'pci-v6.5-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus
Revert "PCI: mvebu: Mark driver as BROKEN"
Revert "PCI: dwc: Wait for link up only if link is started"
MAINTAINERS: Add Manivannan Sadhasivam as DesignWare PCIe driver maintainer
Don't assume that the device is fully under the control of ASPM and use RMW
capability accessors which do proper locking to avoid losing concurrent
updates to the register values.
If configuration fails in pcie_aspm_configure_common_clock(), the
function attempts to restore the old PCI_EXP_LNKCTL_CCC settings. Store
only the old PCI_EXP_LNKCTL_CCC bit for the relevant devices rather
than the content of the whole LNKCTL registers. It aligns better with
how pcie_lnkctl_clear_and_set() expects its parameter and makes the
code more obvious to understand.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 2a42d9dba7 ("PCIe: ASPM: Break out of endless loop waiting for PCI config bits to switch")
Fixes: 7d715a6c1a ("PCI: add PCI Express ASPM support")
Link: https://lore.kernel.org/r/20230717120503.15276-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
As hotplug is not the only driver touching LNKCTL, use the RMW capability
accessor which handles concurrent changes correctly.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 7f822999e1 ("PCI: pciehp: Add Disable/enable link functions")
Link: https://lore.kernel.org/r/20230717120503.15276-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Don't assume that the device is fully under the control of PCI core. Use
RMW capability accessors in link retraining which do proper locking to
avoid losing concurrent updates to the register values.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: 4ec73791a6 ("PCI: Work around Pericom PCIe-to-PCI bridge Retrain Link erratum")
Fixes: 7d715a6c1a ("PCI: add PCI Express ASPM support")
Link: https://lore.kernel.org/r/20230717120503.15276-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Many places in the kernel write the Link Control and Root Control PCI
Express Capability Registers without proper concurrency control and this
could result in losing the changes one of the writers intended to make.
Add pcie_cap_lock spinlock into the struct pci_dev and use it to protect
bit changes made in the RMW capability accessors. Protect only a selected
set of registers by differentiating the RMW accessor internally to
locked/unlocked variants using a wrapper which has the same signature as
pcie_capability_clear_and_set_word(). As the Capability Register (pos)
given to the wrapper is always a constant, the compiler should be able to
simplify all the dead-code away.
So far only the Link Control Register (ASPM, hotplug, link retraining,
various drivers) and the Root Control Register (AER & PME) seem to
require RMW locking.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Fixes: c7f486567c ("PCI PM: PCIe PME root port service driver")
Fixes: f12eb72a26 ("PCI/ASPM: Use PCI Express Capability accessors")
Fixes: 7d715a6c1a ("PCI: add PCI Express ASPM support")
Fixes: affa48de84 ("staging/rdma/hfi1: Add support for enabling/disabling PCIe ASPM")
Fixes: 849a9366cb ("misc: rtsx: Add support new chip rts5228 mmc: rtsx: Add support MMC_CAP2_NO_MMC")
Fixes: 3d1e7aa80d ("misc: rtsx: Use pcie_capability_clear_and_set_word() for PCI_EXP_LNKCTL")
Fixes: c0e5f4e73a ("misc: rtsx: Add support for RTS5261")
Fixes: 3df4fce739 ("misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG")
Fixes: 121e9c6b5c ("misc: rtsx: modify and fix init_hw function")
Fixes: 19f3bd548f ("mfd: rtsx: Remove LCTLR defination")
Fixes: 773ccdfd9c ("mfd: rtsx: Read vendor setting from config space")
Fixes: 8275b77a15 ("mfd: rts5249: Add support for RTS5250S power saving")
Fixes: 5da4e04ae4 ("misc: rtsx: Add support for RTS5260")
Fixes: 0f49bfbd0f ("tg3: Use PCI Express Capability accessors")
Fixes: 5e7dfd0fb9 ("tg3: Prevent corruption at 10 / 100Mbps w CLKREQ")
Fixes: b726e493e8 ("r8169: sync existing 8168 device hardware start sequences with vendor driver")
Fixes: e6de30d63e ("r8169: more 8168dp support.")
Fixes: 8a06127602 ("Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards")
Fixes: 6f461f6c7c ("e1000e: enable/disable ASPM L0s and L1 and ERT according to hardware errata")
Fixes: 1eae4eb2a1 ("e1000e: Disable L1 ASPM power savings for 82573 mobile variants")
Fixes: 8060e169e0 ("ath9k: Enable extended synch for AR9485 to fix L0s recovery issue")
Fixes: 69ce674bfa ("ath9k: do btcoex ASPM disabling at initialization time")
Fixes: f37f055035 ("mt76: mt76x2e: disable pcie_aspm by default")
Link: https://lore.kernel.org/r/20230717120503.15276-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: "Rafael J. Wysocki" <rafael@kernel.org>
Advertise support of Gen5 devices in the driver's device ID table and
add the same IDs for the switchtec quirks. Also update driver code to
accommodate them.
Link: https://lore.kernel.org/r/20230624000003.2315364-3-kelvin.cao@microchip.com
Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
The blamed commit has broken probing on
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi when &enetc_port0
(PCI function 0) has status = "disabled".
Background: pci_scan_slot() has logic to say that if the function 0 of a
device is absent, the entire device is absent and we can skip the other
functions entirely. Traditionally, this has meant that
pci_bus_read_dev_vendor_id() returns an error code for that function.
However, since the blamed commit, there is an extra confounding
condition: function 0 of the device exists and has a valid vendor id,
but it is disabled in the device tree. In that case, pci_scan_slot()
would incorrectly skip the entire device instead of just that function.
In the case of NXP LS1028A, status = "disabled" does not mean that the
PCI function's config space is not available for reading. It is, but the
Ethernet port is just not functionally useful with a particular SerDes
protocol configuration (0x9999) due to pinmuxing constraints of the Soc.
So, pci_scan_slot() skips all other functions on the ENETC ECAM
(enetc_port1, enetc_port2, enetc_mdio_pf3 etc) when just enetc_port0 had
to not be probed.
There is an additional regression introduced by the change, caused by
its fundamental premise. The enetc driver needs to run code for all PCI
functions, regardless of whether they're enabled or not in the device
tree. That is no longer possible if the driver's probe function is no
longer called. But Rob recommends that we move the of_device_is_available()
detection to dev->match_driver, and this makes the PCI fixups still run
on all functions, while just probing drivers for those functions that
are enabled. So, a separate change in the enetc driver will have to move
the workarounds to a PCI fixup.
Fixes: 6fffbc7ae1 ("PCI: Honor firmware's device disabled status")
Link: https://lore.kernel.org/netdev/CAL_JsqLsVYiPLx2kcHkDQ4t=hQVCR7NHziDwi9cCFUFhx48Qow@mail.gmail.com/
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
40613da52b ("PCI: acpiphp: Reassign resources on bridge if necessary")
changed acpiphp hotplug to use pci_assign_unassigned_bridge_resources()
which depends on bridge being available, however enable_slot() can be
called without bridge associated:
1. Legitimate case of hotplug on root bus (widely used in virt world)
2. A (misbehaving) firmware, that sends ACPI Bus Check notifications to
non existing root ports (Dell Inspiron 7352/0W6WV0), which end up at
enable_slot(..., bridge = 0) where bus has no bridge assigned to it.
acpihp doesn't know that it's a bridge, and bus specific 'PCI
subsystem' can't augment ACPI context with bridge information since
the PCI device to get this data from is/was not available.
Issue is easy to reproduce with QEMU's 'pc' machine, which supports PCI
hotplug on hostbridge slots. To reproduce, boot kernel at commit
40613da52b in VM started with following CLI (assuming guest root fs is
installed on sda1 partition):
# qemu-system-x86_64 -M pc -m 1G -enable-kvm -cpu host \
-monitor stdio -serial file:serial.log \
-kernel arch/x86/boot/bzImage \
-append "root=/dev/sda1 console=ttyS0" \
guest_disk.img
Once guest OS is fully booted at qemu prompt:
(qemu) device_add e1000
(check serial.log) it will cause NULL pointer dereference at:
void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
{
struct pci_bus *parent = bridge->subordinate;
BUG: kernel NULL pointer dereference, address: 0000000000000018
? pci_assign_unassigned_bridge_resources+0x1f/0x260
enable_slot+0x21f/0x3e0
acpiphp_hotplug_notify+0x13d/0x260
acpi_device_hotplug+0xbc/0x540
acpi_hotplug_work_fn+0x15/0x20
process_one_work+0x1f7/0x370
worker_thread+0x45/0x3b0
The issue was discovered on Dell Inspiron 7352/0W6WV0 laptop with following
sequence:
1. Suspend to RAM
2. Wake up with the same backtrace being observed:
3. 2nd suspend to RAM attempt makes laptop freeze
Fix it by using __pci_bus_assign_resources() instead of
pci_assign_unassigned_bridge_resources() as we used to do, but only in case
when bus doesn't have a bridge associated (to cover for the case of ACPI
event on hostbridge or non existing root port).
That lets us keep hotplug on root bus working like it used to and at the
same time keeps resource reassignment usable on root ports (and other 1st
level bridges) that was fixed by 40613da52b.
Fixes: 40613da52b ("PCI: acpiphp: Reassign resources on bridge if necessary")
Link: https://lore.kernel.org/r/20230726123518.2361181-2-imammedo@redhat.com
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Tested-by: Woody Suwalski <terraluna977@gmail.com>
Tested-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/11fc981c-af49-ce64-6b43-3e282728bd1a@gmail.com
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
The i.MX integration for the DesignWare PCI controller has a _host_exit()
operation which undoes everything that the _host_init() operation does but
does not wire this up as the host_deinit callback for the core, or call it
in any path other than suspend. This means that if we ever unwind the
initial probe of the device, for example because it fails, the regulator
core complains that the regulators for the device were left enabled:
imx6q-pcie 33800000.pcie: iATU: unroll T, 4 ob, 4 ib, align 64K, limit 16G
imx6q-pcie 33800000.pcie: Phy link never came up
imx6q-pcie 33800000.pcie: Phy link never came up
imx6q-pcie: probe of 33800000.pcie failed with error -110
------------[ cut here ]------------
WARNING: CPU: 2 PID: 46 at drivers/regulator/core.c:2396 _regulator_put+0x110/0x128
Wire up the callback so that the core can clean up after itself.
Link: https://lore.kernel.org/r/20230731-pci-imx-regulator-cleanup-v2-1-fc8fa5c9893d@kernel.org
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Continuing to use pci_host_common_probe() for the PCIe Root Complex on
PolarFire SoC is leading to an extremely large _init() function and some
unnatural code flow. Re-partition the code so that some tasks are done
in a _probe() routine, which calls pci_host_common_probe() and then use
a much smaller _init() function, mainly to enable interrupts after
address translation tables are set up.
Link: https://lore.kernel.org/r/20230728131401.1615724-8-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
The PCIe Root Complex on PolarFire SoC is configured at bitstream creation
time using Libero. Key MSI-related parameters include the number of
MSIs (1/2/4/8/16/32) and the MSI address. In the device driver, extract
this information from hardware registers at init time, and use it to configure
MSI system, including configuring MSI capability structure correctly in
configuration space.
Link: https://lore.kernel.org/r/20230728131401.1615724-7-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Refactor interrupt handling in _init() function into
disable_interrupts(), init_interrupts(), clear_sec_errors() and clear
ded_errors() because current code is unwieldy and prone to bugs.
Disable interrupts as soon as possible and only enable interrupts after
address translation is setup to prevent spurious axi2pcie and pcie2axi
translation errors being reported.
Link: https://lore.kernel.org/r/20230728131401.1615724-6-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Minor re-organisation so that event handlers can access both a pointer
to the bridge area of the PCIe Root Port and the control area of the PCIe
Root Port.
Link: https://lore.kernel.org/r/20230728131401.1615724-5-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Minor code re-organisation so that macros representing registers ascend in
numerical order and use the same names as their hardware documentation.
Removed registers not used by the driver.
Link: https://lore.kernel.org/r/20230728131401.1615724-4-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Enable building driver as a module. The expected use case is the
driver is built as a module, is installed when needed, and cannot be
removed once installed since it is not possible to clean-up
the irq_chip data structures on removal, as described in:
https://lore.kernel.org/linux-pci/87y1wgbah8.wl-maz@kernel.org/
The driver has .suppress_bind_attrs set to true for the same
reasons (ie prevent unbinding, that would leave the kernel
with stale IRQ configuration that cannot be cleaned up).
Link: https://lore.kernel.org/linux-pci/87y1wgbah8.wl-maz@kernel.org/
Link: https://lore.kernel.org/r/20230728131401.1615724-3-daire.mcnamara@microchip.com
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
The SEC and DED interrupt bits are laid out the wrong way round so the SEC
interrupt handler attempts to mask, unmask, and clear the DED interrupt
and vice versa. Correct the bit offsets so that each interrupt handler
operates properly.
Link: https://lore.kernel.org/r/20230728131401.1615724-2-daire.mcnamara@microchip.com
Fixes: 6f15a9c9f9 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver")
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
When we have a struct pci_dev *, use pci_dev_id() instead of manually
composing the ID with PCI_DEVID() from dev->bus->number and dev->devfn.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230807134858.116051-4-wangxiongfeng2@huawei.com
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
When we have a struct pci_dev *, use pci_dev_id() instead of manually
composing the ID with PCI_DEVID() from dev->bus->number and dev->devfn.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230807134858.116051-3-wangxiongfeng2@huawei.com
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
When we have a struct pci_dev *, use pci_dev_id() instead of manually
composing the ID with PCI_DEVID() from dev->bus->number and dev->devfn.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230807134858.116051-2-wangxiongfeng2@huawei.com
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
After commit 4fb8e46c1b ("PCI: tegra194: Enable support for 256 Byte
payload"), we initialize MPS=256 for tegra194 Root Ports before enumerating
the hierarchy.
Consider an Endpoint that supports only MPS=128. In the default situation
(CONFIG_PCIE_BUS_DEFAULT set and no "pci=pcie_bus_*" parameter), Linux
tries to configure the MPS of every device to match the upstream bridge.
If the Endpoint is directly below the Root Port, Linux can reduce the Root
Port MPS to 128 to match the Endpoint. But if there's a switch in the
middle, Linux doesn't reduce the Root Port MPS because other devices below
the switch may already be configured with MPS larger than 128.
This scenario results in uncorrectable Malformed TLP errors if the Root
Port sends TLPs with payloads larger than 128 bytes. These errors can
be avoided by using the "pci=pcie_bus_safe" parameter, but it doesn't
seem to be a good idea to always have this parameter even for basic
functionality to work.
Revert commit 4fb8e46c1b ("PCI: tegra194: Enable support for 256 Byte
payload") so the Root Ports default to MPS=128, which all devices
support.
If peer-to-peer DMA is not required, one can use "pci=pcie_bus_perf" to
get the benefit of larger MPS settings.
[bhelgaas: commit log; kwilczynski: retain "u16 val_16" declaration at
the top, add missing acked by tag]
Fixes: 4fb8e46c1b ("PCI: tegra194: Enable support for 256 Byte payload")
Link: https://lore.kernel.org/linux-pci/20230619102604.3735001-1-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Cc: stable@vger.kernel.org # v6.0-rc1+
Remove the dangerous late initialization of xen-swiotlb in
pci_xen_swiotlb_init_late and instead just always initialize
xen-swiotlb in the boot code if CONFIG_XEN_PCIDEV_FRONTEND is
enabled and Xen PV PCI is possible.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
The following debug object splat was observed in testing:
ODEBUG: free active (active state 0) object: 0000000097d23782 object type: work_struct hint: doe_statemachine_work+0x0/0x510
WARNING: CPU: 1 PID: 71 at lib/debugobjects.c:514 debug_print_object+0x7d/0xb0
...
Workqueue: pci 0000:36:00.0 DOE [1 doe_statemachine_work
RIP: 0010:debug_print_object+0x7d/0xb0
...
Call Trace:
? debug_print_object+0x7d/0xb0
? __pfx_doe_statemachine_work+0x10/0x10
debug_object_free.part.0+0x11b/0x150
doe_statemachine_work+0x45e/0x510
process_one_work+0x1d4/0x3c0
This occurs because destroy_work_on_stack() was called after signaling
the completion in the calling thread. This creates a race between
destroy_work_on_stack() and the task->work struct going out of scope in
pci_doe().
Signal the work complete after destroying the work struct. This is safe
because signal_task_complete() is the final thing the work item does and
the workqueue code is careful not to access the work struct after.
Fixes: abf04be0e7 ("PCI/DOE: Fix memory leak with CONFIG_DEBUG_OBJECTS=y")
Link: https://lore.kernel.org/r/20230726-doe-fix-v1-1-af07e614d4dd@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
This reverts commit da56a1bfba.
Bjorn Andersson, Fabio Estevam, Xiaolei Wang, and Jon Hunter reported that
da56a1bfba ("PCI: dwc: Wait for link up only if link is started") broke
controller probing by returning an error in case the link does not come up
during host initialisation, for example when the slot is empty.
As explained in commit 886a9c1347 ("PCI: dwc: Move link handling into
common code") and as indicated by the comment "Ignore errors, the link may
come up later" in the code, waiting for link up and ignoring errors is the
intended behaviour:
Let's standardize this to succeed as there are usecases where devices
(and the link) appear later even without hotplug. For example, a
reconfigured FPGA device.
Reverting the offending commit specifically fixes a regression on Qualcomm
platforms like the Lenovo ThinkPad X13s which no longer reach the
interconnect sync state if a slot does not have a device populated (e.g. an
optional modem).
Note that enabling asynchronous probing by default as was done for Qualcomm
platforms by commit c0e1eb441b ("PCI: qcom: Enable async probe by
default"), should take care of any related boot time concerns.
Finally, note that the intel-gw driver is the only driver currently not
providing a .start_link() callback and instead starts the link in its
.host_init() callback, which may avoid an additional one-second timeout
during probe by making the link-up wait conditional. If anyone cares, that
can be done in a follow-up patch with a proper motivation.
[bhelgaas: add Fabio Estevam, Xiaolei Wang, Jon Hunter reports]
Fixes: da56a1bfba ("PCI: dwc: Wait for link up only if link is started")
Link: https://lore.kernel.org/r/20230706082610.26584-1-johan+linaro@kernel.org
Reported-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reported-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20230704122635.1362156-1-festevam@gmail.com/
Reported-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20230705010624.3912934-1-xiaolei.wang@windriver.com/
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/6ca287a1-6c7c-7b90-9022-9e73fb82b564@nvidia.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Sajid Dalvi <sdalvi@google.com>
Cc: Ajay Agarwal <ajayagarwal@google.com>
If legacy I/O spaces are not supported simply return an error when
trying to access them via pci_resource_io(). This allows inb() and
friends to become undefined when they are known at compile time to be
non-functional in a later patch.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Link: https://lore.kernel.org/r/20230703135255.2202721-3-schnelle@linux.ibm.com
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
