scsi_decide_disposition() may call scsi_check_sense().
scsi_decide_disposition() calls are not serialized. Hence, counter
updates by scsi_check_sense() must be serialized. Hence this patch that
makes the counters updated by scsi_check_sense() atomic.
Cc: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Fixes: a5d518cd4e ("scsi: core: Add counters for New Media and Power On/Reset UNIT ATTENTIONs")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Link: https://patch.msgid.link/20251014220244.3689508-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A value of an attribute will be initialized at ufshcd_dme_get_attr().
There is no need to initialize a tx_lanes.
Signed-off-by: Wonkon Kim <wkon.kim@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251020061539.28661-3-wkon.kim@samsung.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If ufshcd_send_cmd() fails, *mib_val may have a garbage value. It can
get an unintended value of an attribute.
Make ufshcd_dme_get_attr() always initialize *mib_val.
Fixes: 12b4fdb4f6 ("[SCSI] ufs: add dme configuration primitives")
Signed-off-by: Wonkon Kim <wkon.kim@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251020061539.28661-2-wkon.kim@samsung.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the issue where host_sem is not released due to a new return path in
commit f966e02ae5 ("scsi: ufs: core: Fix runtime suspend error
deadlock").
Check pm_op_in_progress before acquiring hba->host_sem to prevent
deadlocks and ensure proper resource management during error
handling. Add comment for use ufshcd_rpm_get_noresume() to safely
perform link recovery without interfering with ongoing PM operations.
Fixes: f966e02ae5 ("scsi: ufs: core: Fix runtime suspend error deadlock")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251008065651.1589614-2-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmj2U4QTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnKwFCACThbt7TvfZHBVRFTLsXT72orU6KdjU
Id2ahTBsDcvdoSPqihAp/+Crp+hX/7oynvB8qwVm1HVcmrcCPfZa9W+AAF6SnY5W
Y8T22wqBqJWEP7OwLEfhQQbrnezbQGmaVGKlf5kxdx/MULYZ5Kq9AUl/R/Q7eCzs
hxBV59BIE7DBuVwaJQ/XlGQWly7uiO9YyWjeZ4WlTY41VRcAl3QK3UWidVPA7G7C
vrnM2UnHyTqRNDl0GvcORsVF9E4oJIm+hT91O3OdX1C3qqwQT+5fMuUXcbB4L2jQ
dB3XLUFSD0Yd3NKiRBG9SRxKtBvYWRyawfTwKjjHEPTLJatYbbPX9jv8
=wCYS
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.18-20251020' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-10-20
All patches are by me. The first 3 update the bxcan, esd and rockchip
driver to drop skbs in xmit of the device is in listen only mode.
The last patch targets the CAN netlink implementation to allow the
disabling of automatic restart after Bus-Off, even if the a driver
doesn't implement that callback.
* tag 'linux-can-fixes-for-6.18-20251020' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: netlink: can_changelink(): allow disabling of automatic restart
can: rockchip-canfd: rkcanfd_start_xmit(): use can_dev_dropped_skb() instead of can_dropped_invalid_skb()
can: esd: acc_start_xmit(): use can_dev_dropped_skb() instead of can_dropped_invalid_skb()
can: bxcan: bxcan_start_xmit(): use can_dev_dropped_skb() instead of can_dropped_invalid_skb()
====================
Link: https://patch.msgid.link/20251020152516.1590553-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update the mailing list subscription information for the linux-hams
mailing list.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251020052716.3136773-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot found that the local_unlock_nested_bh() call was
missing in some cases.
WARNING: possible recursive locking detected
syzkaller #0 Not tainted
--------------------------------------------
syz.2.329/7421 is trying to acquire lock:
ffffe8ffffd48888 ((&cell->bh_lock)){+...}-{3:3}, at: spin_lock include/linux/spinlock_rt.h:44 [inline]
ffffe8ffffd48888 ((&cell->bh_lock)){+...}-{3:3}, at: gro_cells_receive+0x404/0x790 net/core/gro_cells.c:30
but task is already holding lock:
ffffe8ffffd48888 ((&cell->bh_lock)){+...}-{3:3}, at: spin_lock include/linux/spinlock_rt.h:44 [inline]
ffffe8ffffd48888 ((&cell->bh_lock)){+...}-{3:3}, at: gro_cells_receive+0x404/0x790 net/core/gro_cells.c:30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock((&cell->bh_lock));
lock((&cell->bh_lock));
*** DEADLOCK ***
Given the introduction of @have_bh_lock variable, it seems the author
intent was to have the local_unlock_nested_bh() after the @unlock label.
Fixes: 25718fdcbd ("net: gro_cells: Use nested-BH locking for gro_cell")
Reported-by: syzbot+f9651b9a8212e1c8906f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68f65eb9.a70a0220.205af.0034.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20251020161114.1891141-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: handle late ADD_ADDR + selftests skip
Here are a few independent fixes related to MPTCP and its selftests:
- Patch 1: correctly handle ADD_ADDR being received after the switch to
'fully-established'. A fix for another recent fix backported up to
v5.14.
- Patches 2-5: properly mark some MPTCP Join subtests as 'skipped' if
the tested kernel doesn't support the feature being validated. Some
fixes for up to v5.13, v5.18, v6.11 and v6.18-rc1 respectively.
====================
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-0-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The call to 'continue_if' was missing: it properly marks a subtest as
'skipped' if the attached condition is not valid.
Without that, the test is wrongly marked as passed on older kernels.
Fixes: c912f935a5 ("selftests: mptcp: join: validate new laminar endp")
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-5-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The call to 'continue_if' was missing: it properly marks a subtest as
'skipped' if the attached condition is not valid.
Without that, the test is wrongly marked as passed on older kernels.
Fixes: b5e2fb832f ("selftests: mptcp: add explicit test case for remove/readd")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-4-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The call to 'continue_if' was missing: it properly marks a subtest as
'skipped' if the attached condition is not valid.
Without that, the test is wrongly marked as passed on older kernels.
Fixes: 36c4127ae8 ("selftests: mptcp: join: skip implicit tests if not supported")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-3-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The call to 'continue_if' was missing: it properly marks a subtest as
'skipped' if the attached condition is not valid.
Without that, the test is wrongly marked as passed on older kernels.
Fixes: e06959e9ee ("selftests: mptcp: join: test for flush/re-add endpoints")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-2-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The special C-flag case expects the ADD_ADDR to be received when
switching to 'fully-established'. But for various reasons, the ADD_ADDR
could be sent after the "4th ACK", and the special case doesn't work.
On NIPA, the new test validating this special case for the C-flag failed
a few times, e.g.
102 default limits, server deny join id 0
syn rx [FAIL] got 0 JOIN[s] syn rx expected 2
Server ns stats
(...)
MPTcpExtAddAddrTx 1
MPTcpExtEchoAdd 1
Client ns stats
(...)
MPTcpExtAddAddr 1
MPTcpExtEchoAddTx 1
synack rx [FAIL] got 0 JOIN[s] synack rx expected 2
ack rx [FAIL] got 0 JOIN[s] ack rx expected 2
join Rx [FAIL] see above
syn tx [FAIL] got 0 JOIN[s] syn tx expected 2
join Tx [FAIL] see above
I had a suspicion about what the issue could be: the ADD_ADDR might have
been received after the switch to the 'fully-established' state. The
issue was not easy to reproduce. The packet capture shown that the
ADD_ADDR can indeed be sent with a delay, and the client would not try
to establish subflows to it as expected.
A simple fix is not to mark the endpoints as 'used' in the C-flag case,
when looking at creating subflows to the remote initial IP address and
port. In this case, there is no need to try.
Note: newly added fullmesh endpoints will still continue to be used as
expected, thanks to the conditions behind mptcp_pm_add_addr_c_flag_case.
Fixes: 4b1ff850e0 ("mptcp: pm: in-kernel: usable client side with C-flag")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-1-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The initial m.delta[0] also needs to be checked against zero.
In addition, also drop the redundant logic that errors out for
lcn == 0 / m.delta[0] == 1 case.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Robert reported an infinite loop observed by two crafted images.
The root cause is that `clusterofs` can be larger than `lclustersize`
for !NONHEAD `lclusters` in corrupted subpage compact indexes, e.g.:
blocksize = lclustersize = 512 lcn = 6 clusterofs = 515
Move the corresponding check for full compress indexes to
`z_erofs_load_lcluster_from_disk()` to also cover subpage compact
compress indexes.
It also fixes the position of `m->type >= Z_EROFS_LCLUSTER_TYPE_MAX`
check, since it should be placed right after
`z_erofs_load_{compact,full}_lcluster()`.
Fixes: 8d2517aaee ("erofs: fix up compacted indexes for block size < 4096")
Fixes: 1a5223c182 ("erofs: do sanity check on m->type in z_erofs_load_compact_lcluster()")
Reported-by: Robert Morris <rtm@csail.mit.edu>
Closes: https://lore.kernel.org/r/35167.1760645886@localhost
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Recent changes require the raw folio flags to be accessed via ".f". The
merge commit introducing this change adapted most architecture code but
forgot the csky abiv2.
[rppt@kernel.org: add fix for arch/csky/abiv2/cacheflush.c]
Link: https://lkml.kernel.org/r/aPCE238oxAB9QcZa@kernel.org
Fixes: 53fbef56e0 ("mm: introduce memdesc_flags_t")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When damos_commit_quota_goals() is called for adding new DAMOS quota goals
of DAMOS_QUOTA_USER_INPUT metric, current_value fields of the new goals
should be also set as requested.
However, damos_commit_quota_goals() is not updating the field for the
case, since it is setting only metrics and target values using
damos_new_quota_goal(), and metric-optional union fields using
damos_commit_quota_goal_union(). As a result, users could see the first
current_value parameter that committed online with a new quota goal is
ignored. Users are assumed to commit the current_value for
DAMOS_QUOTA_USER_INPUT quota goals, since it is being used as a feedback.
Hence the real impact would be subtle. That said, this is obviously not
intended behavior.
Fix the issue by using damos_commit_quota_goal() which sets all quota goal
parameters, instead of damos_commit_quota_goal_union(), which sets only
the union fields.
Link: https://lkml.kernel.org/r/20251014001846.279282-1-sj@kernel.org
Fixes: 1aef9df0ee ("mm/damon/core: commit damos_quota_goal->nid")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.16+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, damon_destroy_scheme() only cleans up the filter list but
leaves ops_filter untouched, which could lead to memory leaks when a
scheme is destroyed.
This patch ensures both filter and ops_filter are properly freed in
damon_destroy_scheme(), preventing potential memory leaks.
Link: https://lkml.kernel.org/r/20251014084225.313313-1-lienze@kylinos.cn
Fixes: ab82e57981 ("mm/damon/core: introduce damos->ops_filters")
Signed-off-by: Enze Li <lienze@kylinos.cn>
Reviewed-by: SeongJae Park <sj@kernel.org>
Tested-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When hugetlb_vmdelete_list() processes VMAs during truncate operations, it
may encounter VMAs where huge_pmd_unshare() is called without the required
shareable lock. This triggers an assertion failure in
hugetlb_vma_assert_locked().
The previous fix in commit dd83609b88 ("hugetlbfs: skip VMAs without
shareable locks in hugetlb_vmdelete_list") skipped entire VMAs without
shareable locks to avoid the assertion. However, this prevented pages
from being unmapped and freed, causing a regression in
fallocate(PUNCH_HOLE) operations where pages were not freed immediately,
as reported by Mark Brown.
Instead of checking locks in the caller or skipping VMAs, move the lock
assertions in huge_pmd_unshare() to after the early return checks. The
assertions are only needed when actual PMD unsharing work will be
performed. If the function returns early because sz != PMD_SIZE or the
PMD is not shared, no locks are required and assertions should not fire.
This approach reverts the VMA skipping logic from commit dd83609b88
("hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list")
while moving the assertions to avoid the assertion failure, keeping all
the logic within huge_pmd_unshare() itself and allowing page unmapping and
freeing to proceed for all VMAs.
Link: https://lkml.kernel.org/r/20251014113344.21194-1-kartikey406@gmail.com
Fixes: dd83609b88 ("hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list")
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reported-by: <syzbot+f26d7c75c26ec19790e7@syzkaller.appspotmail.com>
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://syzkaller.appspot.com/bug?extid=f26d7c75c26ec19790e7
Suggested-by: David Hildenbrand <david@redhat.com>
Suggested-by: Oscar Salvador <osalvador@suse.de>
Tested-by: <syzbot+f26d7c75c26ec19790e7@syzkaller.appspotmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When migrating a balloon page, we first deflate the old page to then
inflate the new page.
However, if inflating the new page succeeded, we effectively deflated the
old page, reducing the balloon size.
In that case, the migration actually worked: similar to migrating+
immediately deflating the new page. The old page will be freed back to
the buddy.
Right now, the core will leave the page be marked as isolated (as we
returned an error). When later trying to putback that page, we will run
into the WARN_ON_ONCE() in balloon_page_putback().
That handling was changed in commit 3544c4facc ("mm/balloon_compaction:
stop using __ClearPageMovable()"); before that change, we would have
tolerated that way of handling it.
To fix it, let's just return 0 in that case, making the core effectively
just clear the "isolated" flag + freeing it back to the buddy as if the
migration succeeded. Note that the new page will also get freed when the
core puts the last reference.
Note that this also makes it all be more consistent: we will no longer
unisolate the page in the balloon driver while keeping it marked as being
isolated in migration core.
This was found by code inspection.
Link: https://lkml.kernel.org/r/20251014124455.478345-1-david@redhat.com
Fixes: 3544c4facc ("mm/balloon_compaction: stop using __ClearPageMovable()")
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Each damon_ctx maintains callback requests using a linked list
(damon_ctx->call_controls). When a new callback request is received via
damon_call(), the new request should be added to the list. However, the
function is making a mistake at list_add_tail() invocation: putting the
new item to add and the list head to add it before, in the opposite order.
Because of the linked list manipulation implementation, the new request
can still be reached from the context's list head. But the list items
that were added before the new request are dropped from the list.
As a result, the callbacks are unexpectedly not invocated. Worse yet, if
the dropped callback requests were dynamically allocated, the memory is
leaked. Actually DAMON sysfs interface is using a dynamically allocated
repeat-mode callback request for automatic essential stats update. And
because the online DAMON parameters commit is using a non-repeat-mode
callback request, the issue can easily be reproduced, like below.
# damo start --damos_action stat --refresh_stat 1s
# damo tune --damos_action stat --refresh_stat 1s
The first command dynamically allocates the repeat-mode callback request
for automatic essential stat update. Users can see the essential stats
are automatically updated for every second, using the sysfs interface.
The second command calls damon_commit() with a new callback request that
was made for the commit. As a result, the previously added repeat-mode
callback request is dropped from the list. The automatic stats refresh
stops working, and the memory for the repeat-mode callback request is
leaked. It can be confirmed using kmemleak.
Fix the mistake on the list_add_tail() call.
Link: https://lkml.kernel.org/r/20251014205939.1206-1-sj@kernel.org
Fixes: 004ded6bee ("mm/damon: accept parallel damon_call() requests")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit b714ccb02a ("mm/mremap: complete refactor of move_vma()")
mistakenly introduced a new behaviour - clearing the VM_ACCOUNT flag of
the old mapping when a mapping is mremap()'d with the MREMAP_DONTUNMAP
flag set.
While we always clear the VM_LOCKED and VM_LOCKONFAULT flags for the old
mapping (the page tables have been moved, so there is no data that could
possibly be locked in memory), there is no reason to touch any other VMA
flags.
This is because after the move the old mapping is in a state as if it were
freshly mapped. This implies that the attributes of the mapping ought to
remain the same, including whether or not the mapping is accounted.
Link: https://lkml.kernel.org/r/20251013165836.273113-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Fixes: b714ccb02a ("mm/mremap: complete refactor of move_vma()")
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I've found that pynfs COMP6 now leaves the connection or lease in a
strange state, which causes CLOSE9 to hang indefinitely. I've dug
into it a little, but I haven't been able to root-cause it yet.
However, I bisected to commit 48aab1606f ("NFSD: Remove the cap on
number of operations per NFSv4 COMPOUND").
Tianshuo Han also reports a potential vulnerability when decoding
an NFSv4 COMPOUND. An attacker can place an arbitrarily large op
count in the COMPOUND header, which results in:
[ 51.410584] nfsd: vmalloc error: size 1209533382144, exceeds total
pages, mode:0xdc0(GFP_KERNEL|__GFP_ZERO),
nodemask=(null),cpuset=/,mems_allowed=0
when NFSD attempts to allocate the COMPOUND op array.
Let's restore the operation-per-COMPOUND limit, but increased to 200
for now.
Reported-by: tianshuo han <hantianshuo233@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@vger.kernel.org
Tested-by: Tianshuo Han <hantianshuo233@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There is an error building nfs4xdr.c with CONFIG_SUNRPC_DEBUG_TRACE=y
and CONFIG_FORTIFY_SOURCE=n due to the local variable strlen conflicting
with the function strlen():
In file included from include/linux/cpumask.h:11,
from arch/x86/include/asm/paravirt.h:21,
from arch/x86/include/asm/irqflags.h:102,
from include/linux/irqflags.h:18,
from include/linux/spinlock.h:59,
from include/linux/mmzone.h:8,
from include/linux/gfp.h:7,
from include/linux/slab.h:16,
from fs/nfsd/nfs4xdr.c:37:
fs/nfsd/nfs4xdr.c: In function 'nfsd4_encode_components_esc':
include/linux/kernel.h:321:46: error: called object 'strlen' is not a function or function pointer
321 | __trace_puts(_THIS_IP_, str, strlen(str)); \
| ^~~~~~
include/linux/kernel.h:265:17: note: in expansion of macro 'trace_puts'
265 | trace_puts(fmt); \
| ^~~~~~~~~~
include/linux/sunrpc/debug.h:34:41: note: in expansion of macro 'trace_printk'
34 | # define __sunrpc_printk(fmt, ...) trace_printk(fmt, ##__VA_ARGS__)
| ^~~~~~~~~~~~
include/linux/sunrpc/debug.h:42:17: note: in expansion of macro '__sunrpc_printk'
42 | __sunrpc_printk(fmt, ##__VA_ARGS__); \
| ^~~~~~~~~~~~~~~
include/linux/sunrpc/debug.h:25:9: note: in expansion of macro 'dfprintk'
25 | dfprintk(FACILITY, fmt, ##__VA_ARGS__)
| ^~~~~~~~
fs/nfsd/nfs4xdr.c:2646:9: note: in expansion of macro 'dprintk'
2646 | dprintk("nfsd4_encode_components(%s)\n", components);
| ^~~~~~~
fs/nfsd/nfs4xdr.c:2643:13: note: declared here
2643 | int strlen, count=0;
| ^~~~~~
This dprintk() instance is not particularly useful, so just remove it
altogether to get rid of the immediate strlen() conflict.
At the same time, eliminate the local strlen variable to avoid potential
conflicts with strlen() in the future.
Fixes: ec7d8e68ef ("sunrpc: add a Kconfig option to redirect dfprintk() output to trace buffer")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When tracing is enabled, the trace_nfsd_read_done trace point
crashes during the pynfs read.testNoFh test.
Fixes: 15a8b55dbb ("nfsd: call op_release, even when op_func returns an error")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NFSv4 clients won't send legitimate GETATTR requests for these new
attributes because they are intended to be used only with CB_GETATTR
and SETATTR. But NFSD has to do something besides crashing if it
ever sees a GETATTR request that queries these attributes.
RFC 8881 Section 18.7.3 states:
> The server MUST return a value for each attribute that the client
> requests if the attribute is supported by the server for the
> target file system. If the server does not support a particular
> attribute on the target file system, then it MUST NOT return the
> attribute value and MUST NOT set the attribute bit in the result
> bitmap. The server MUST return an error if it supports an
> attribute on the target but cannot obtain its value. In that case,
> no attribute values will be returned.
Further, RFC 9754 Section 5 states:
> These new attributes are invalid to be used with GETATTR, VERIFY,
> and NVERIFY, and they can only be used with CB_GETATTR and SETATTR
> by a client holding an appropriate delegation.
Thus there does not appear to be a specific server response mandated
by specification. Taking the guidance that querying these attributes
via GETATTR is "invalid", NFSD will return nfserr_inval, failing the
request entirely.
Reported-by: Robert Morris <rtm@csail.mit.edu>
Closes: https://lore.kernel.org/linux-nfs/7819419cf0cb50d8130dc6b747765d2b8febc88a.camel@kernel.org/T/#t
Fixes: 51c0d4f7e3 ("nfsd: add support for FATTR4_OPEN_ARGUMENTS")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The Generic Initiator Affinity Structure in SRAT table uses device
handle type field to indicate the device type. According to ACPI
specification, the device handle type value of 1 represents PCI device,
not 0.
Fixes: 894c26a1c2 ("ACPI: Support Generic Initiator only domains")
Reported-by: Wu Zongyong <wuzongyong@linux.alibaba.com>
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20250913023224.39281-1-xueshuai@linux.alibaba.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Current pte_mkwrite_novma() makes PTE dirty unconditionally. This may
mark some pages that are never written dirty wrongly. For example,
do_swap_page() may map the exclusive pages with writable and clean PTEs
if the VMA is writable and the page fault is for read access.
However, current pte_mkwrite_novma() implementation always dirties the
PTE. This may cause unnecessary disk writing if the pages are
never written before being reclaimed.
So, change pte_mkwrite_novma() to clear the PTE_RDONLY bit only if the
PTE_DIRTY bit is set to make it possible to make the PTE writable and
clean.
The current behavior was introduced in commit 73e86cb03c ("arm64:
Move PTE_RDONLY bit handling out of set_pte_at()"). Before that,
pte_mkwrite() only sets the PTE_WRITE bit, while set_pte_at() only
clears the PTE_RDONLY bit if both the PTE_WRITE and the PTE_DIRTY bits
are set.
To test the performance impact of the patch, on an arm64 server
machine, run 16 redis-server processes on socket 1 and 16
memtier_benchmark processes on socket 0 with mostly get
transactions (that is, redis-server will mostly read memory only).
The memory footprint of redis-server is larger than the available
memory, so swap out/in will be triggered. Test results show that the
patch can avoid most swapping out because the pages are mostly clean.
And the benchmark throughput improves ~23.9% in the test.
Fixes: 73e86cb03c ("arm64: Move PTE_RDONLY bit handling out of set_pte_at()")
Signed-off-by: Huang Ying <ying.huang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
of_genpd_add_provider_simple() could fail, in which case this code
leaks the domain name, pd->pd.name.
Use devm_kstrdup_const() to plug this leak. As a side-effect, we can
simplify existing error handling.
Fixes: c09a3e6c97 ("soc: samsung: pm_domains: Convert to regular platform driver")
Cc: stable@vger.kernel.org
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
schedule_dc_vmin_vmax() is called by dm_crtc_high_irq(). Hence, we
cannot have the former sleep. Use GFP_NOWAIT for allocation in this
function.
Fixes: c210b757b4 ("drm/amd/display: fix dmub access race condition")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c04812cbe2)
Cc: stable@vger.kernel.org
[Why]
On a mst branch with multi display setup, dc context is obselete
after updating the first stream. Referencing the same dc context
for the next stream update to fetch dc pointer leads to NULL
pointer dereference.
[How]
Get the dc pointer from the link rather than context.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dc69b48988)
Cc: stable@vger.kernel.org
If two competing threads enter alloc_slab_obj_exts() and one of them
fails to allocate the object extension vector, it might override the
valid slab->obj_exts allocated by the other thread with
OBJEXTS_ALLOC_FAIL. This will cause the thread that lost this race and
expects a valid pointer to dereference a NULL pointer later on.
Update slab->obj_exts atomically using cmpxchg() to avoid
slab->obj_exts overrides by racing threads.
Thanks for Vlastimil and Suren's help with debugging.
Fixes: f7381b9116 ("slab: mark slab->obj_exts allocation failures unconditionally")
Cc: <stable@vger.kernel.org>
Suggested-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Link: https://patch.msgid.link/20251021010353.1187193-1-hao.ge@linux.dev
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Merge series from Vitaly Rodionov <vitalyr@opensource.cirrus.com>:
This patch series introduces DAC, CODEC, and SPI control bus support
for Cirrus Logic CS530x variants, along with general code cleanup
and resolution of checkpatch.pl warnings.
Changes since v1,v2,v3:
- Signed off all patches
- Splitted "tidy up" pach in 3 separate simple patches
- Fixed commit subject to much preferred subject prefix for binding patches.
- Moved dt-bindings related patch down the chain
- Added all relevant maintainers to CC list
Simon Trimmer (4):
ASoC: cs530x: Correct log message with expected variable
ASoC: cs530x: Add CODEC and DAC support
ASoC: cs530x: Check the DEVID matches the devtype
ASoC: cs530x: Rename i2c related structures
Vitaly Rodionov (7):
ASoC: cs530x: Update the copyright headers
ASoC: cs530x: Sort #include directives and tidy up whitespaces
ASoC: cs530x: Remove unused struct members and constants
ASoC: cs530x: Correct constant naming
ASoC: dt-bindings: sound: cirrus: cs530x: Add cs530x variants
ASoC: cs530x: Correct MCLK reference frequency values
ASoC: cs530x: Add SPI bus support for cs530x parts
.../bindings/sound/cirrus,cs530x.yaml | 4 +
sound/soc/codecs/Kconfig | 10 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/cs530x-i2c.c | 24 +-
sound/soc/codecs/cs530x-spi.c | 92 ++++
sound/soc/codecs/cs530x.c | 516 +++++++++++++++---
sound/soc/codecs/cs530x.h | 120 ++--
7 files changed, 634 insertions(+), 134 deletions(-)
create mode 100644 sound/soc/codecs/cs530x-spi.c
--
2.43.0
Enabling compile testing should not enable every individual driver (we
have "allyesconfig" for that).
Fixes: 7cd8db0fb0 ("mmc: add COMPILE_TEST to multiple drivers")
Cc: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When retbleed mitigation is disabled, the kernel already prints an info
message that the system is vulnerable. Recent code restructuring also
inadvertently led to RETBLEED_INTEL_MSG being printed as an error, which is
unnecessary as retbleed mitigation was already explicitly disabled (by config
option, cmdline, etc.).
Qualify this print statement so the warning is not printed unless an actual
retbleed mitigation was selected and is being disabled due to incompatibility
with spectre_v2.
Fixes: e3b78a7ad5 ("x86/bugs: Restructure retbleed mitigation")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220624
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251003171936.155391-1-david.kaplan@amd.com
Resolve race conditions in timestamp events list handling between TX
and RX paths causing missed timestamps.
The current implementation uses a single events list for both TX and RX
timestamps. The am65_cpts_find_ts() function acquires the lock,
splices all events (TX as well as RX events) to a temporary list,
and releases the lock. This function performs matching of timestamps
for TX packets only. Before it acquires the lock again to put the
non-TX events back to the main events list, a concurrent RX
processing thread could acquire the lock (as observed in practice),
find an empty events list, and fail to attach timestamp to it,
even though a relevant event exists in the spliced list which is yet to
be restored to the main list.
Fix this by creating separate events lists to handle TX and RX
timestamps independently.
Fixes: c459f606f6 ("net: ethernet: ti: am65-cpts: Enable RX HW timestamp for PTP packets using CPTS FIFO")
Signed-off-by: Aksh Garg <a-garg7@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20251016115755.1123646-1-a-garg7@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Attempting to load the pci-idio-16 module fails during regmap
initialization with a return error -EINVAL. This is a result of the
regmap cache failing initialization. Set the idio_16_regmap_config
max_register member to fix this failure.
Fixes: 73d8f3efc5 ("gpio: pci-idio-16: Migrate to the regmap API")
Reported-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Closes: https://lore.kernel.org/r/9b0375fd-235f-4ee1-a7fa-daca296ef6bf@nutanix.com
Suggested-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251020-fix-gpio-idio-16-regmap-v2-2-ebeb50e93c33@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Attempting to load the 104-idio-16 module fails during regmap
initialization with a return error -EINVAL. This is a result of the
regmap cache failing initialization. Set the idio_16_regmap_config
max_register member to fix this failure.
Fixes: 2c210c9a34 ("gpio: 104-idio-16: Migrate to the regmap API")
Reported-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Closes: https://lore.kernel.org/r/9b0375fd-235f-4ee1-a7fa-daca296ef6bf@nutanix.com
Suggested-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251020-fix-gpio-idio-16-regmap-v2-1-ebeb50e93c33@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
With enough debug options enabled, struct xfs_mount is larger
than 4k and thus NOFAIL allocations won't work for it.
xfs_init_fs_context is early in the mount process, and if we really
are out of memory there we'd better give up ASAP anyway.
Fixes: 7b77b46a61 ("xfs: use kmem functions for struct xfs_mount")
Reported-by: syzbot+359a67b608de1ef72f65@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The MRU cache for open zones is unfortunately still not ideal, as it can
time out pretty easily when doing heavy I/O to hard disks using up most
or all open zones. One option would be to just increase the timeout,
but while looking into that I realized we're just better off caching it
indefinitely as there is no real downside to that once we don't hold a
reference to the cache open zone.
So switch the open zone to RCU freeing, and then stash the last used
open zone into inode->i_private. This helps to significantly reduce
fragmentation by keeping I/O localized to zones for workloads that
write using many open files to HDD.
Fixes: 4e4d520755 ("xfs: add the zoned space allocator")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
When GCD has no new work to handle, but read, write or reset commands
are outstanding, it currently busy loops, which is a bit suboptimal,
and can lead to softlockup warnings in case of stuck commands.
Change the code so that the task state is only set to running when work
is performed, which looks a bit tricky due to the design of the
reading/writing/resetting lists that contain both in-flight and finished
commands.
Fixes: 080d01c41d ("xfs: implement zoned garbage collection")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
When using page list framebuffer, and using RGB888 format, some
pixels can cross the page boundaries, and this case was not handled,
leading to writing 1 or 2 bytes on the next virtual address.
Add a check and a specific function to handle this case.
Fixes: c9ff280879 ("drm/panic: Add support to scanout buffer as array of pages")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20251009122955.562888-7-jfalempe@redhat.com
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
In the unlikely case that the screen is tiny, and smaller than the
font width, it leads to a divide by 0:
draw_line_with_wrap()
chars_per_row = sb->width / font->width = 0
line_wrap.len = line->len % chars_per_row;
This will trigger a divide by 0
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20251009122955.562888-6-jfalempe@redhat.com
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Depending on qr_code size and screen size, the vertical margin can
be negative, that means there is not enough room to draw the qr_code.
So abort early, to avoid a segfault by trying to draw at negative
coordinates.
Fixes: cb5164ac43 ("drm/panic: Add a QR code panic screen")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20251009122955.562888-4-jfalempe@redhat.com
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
