* kvm-arm64/selftests-6.18:
: .
: KVM/arm64 selftest updates for 6.18:
:
: - Large update to run EL1 selftests at EL2 when possible
: (20250917212044.294760-1-oliver.upton@linux.dev)
:
: - Work around lack of ID_AA64MMFR4_EL1 trapping on CPUs
: without FEAT_FGT
: (20250923173006.467455-1-oliver.upton@linux.dev)
:
: - Additional fixes and cleanups
: (20250920-kvm-arm64-id-aa64isar3-el1-v1-0-1764c1c1c96d@kernel.org)
: .
KVM: arm64: selftests: Cover ID_AA64ISAR3_EL1 in set_id_regs
KVM: arm64: selftests: Remove a duplicate register listing in set_id_regs
KVM: arm64: selftests: Cope with arch silliness in EL2 selftest
KVM: arm64: selftests: Add basic test for running in VHE EL2
KVM: arm64: selftests: Enable EL2 by default
KVM: arm64: selftests: Initialize HCR_EL2
KVM: arm64: selftests: Use the vCPU attr for setting nr of PMU counters
KVM: arm64: selftests: Use hyp timer IRQs when test runs at EL2
KVM: arm64: selftests: Select SMCCC conduit based on current EL
KVM: arm64: selftests: Provide helper for getting default vCPU target
KVM: arm64: selftests: Alias EL1 registers to EL2 counterparts
KVM: arm64: selftests: Create a VGICv3 for 'default' VMs
KVM: arm64: selftests: Add unsanitised helpers for VGICv3 creation
KVM: arm64: selftests: Add helper to check for VGICv3 support
KVM: arm64: selftests: Initialize VGICv3 only once
KVM: arm64: selftests: Provide kvm_arch_vm_post_create() in library code
Signed-off-by: Marc Zyngier <maz@kernel.org>
We have a couple of writable bitfields in ID_AA64ISAR3_EL1 but the
set_id_regs selftest does not cover this register at all, add coverage.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Currently we list the main set of registers with bits we test three
times, once in the test_regs array which is used at runtime, once in the
guest code and once in a list of ARRAY_SIZE() operations we use to tell
kselftest how many tests we plan to execute. This is needlessly fiddly,
when adding new registers as the test_cnt calculation is formatted with
two registers per line. Instead count the number of bitfields in the
register arrays at runtime.
The existing code subtracts ARRAY_SIZE(test_regs) from the number of
tests to account for the terminating FTR_REG_END entries in the per
register arrays, the new code accounts for this when enumerating.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Implementations without FEAT_FGT aren't required to trap the entire ID
register space when HCR_EL2.TID3 is set. This is a terrible idea, as the
hypervisor may need to advertise the absence of a feature to the VM
using a negative value in a signed field, FEAT_E2H0 being a great
example of this.
Cope with uncooperative implementations in the EL2 selftest by accepting
a zero value when FEAT_FGT is absent and otherwise only tolerating the
expected nonzero value.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add an embarrassingly simple selftest for sanity checking KVM's VHE EL2
and test that the ID register bits are consistent with HCR_EL2.E2H being
RES1.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Take advantage of VHE to implicitly promote KVM selftests to run at EL2
with only slight modification. Update the smccc_filter test to account
for this now that the EL2-ness of a VM is visible to tests.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Initialize HCR_EL2 such that EL2&0 is considered 'InHost', allowing the
use of (mostly) unmodified EL1 selftests at EL2.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Configuring the number of implemented counters via PMCR_EL0.N was a bad
idea in retrospect as it interacts poorly with nested. Migrate the
selftest to use the vCPU attribute instead of the KVM_SET_ONE_REG
mechanism.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Arch timer registers are redirected to their hypervisor counterparts
when running in VHE EL2. This is great, except for the fact that the
hypervisor timers use different PPIs. Use the correct INTIDs when that
is the case.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
HVCs are taken within the VM when EL2 is in use. Ensure tests use the
SMC instruction when running at EL2 to interact with the host.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The default vCPU target in KVM selftests is pretty boring in that it
doesn't enable any vCPU features. Expose a helper for getting the
default target to prepare for cramming in more features. Call
KVM_ARM_PREFERRED_TARGET directly from get-reg-list as it needs
fine-grained control over feature flags.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
FEAT_VHE has the somewhat nice property of implicitly redirecting EL1
register aliases to their corresponding EL2 representations when E2H=1.
Unfortunately, there's no such abstraction for userspace and EL2
registers are always accessed by their canonical encoding.
Introduce a helper that applies EL2 redirections to sysregs and use
aggressive inlining to catch misuse at compile time. Go a little past
the architectural definition for ease of use for test authors (e.g. the
stack pointer).
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Start creating a VGICv3 by default unless explicitly opted-out by the
test. While having an interrupt controller is nice, the real benefit
here is clearing a hurdle for EL2 VMs which mandate the presence of a
VGIC.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
vgic_v3_setup() has a good bit of sanity checking internally to ensure
that vCPUs have actually been created and match the dimensioning of the
vgic itself. Spin off an unsanitised setup and initialization helper so
vgic initialization can be wired in around a 'default' VM's vCPU
creation.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Introduce a proper predicate for probing VGICv3 by performing a 'test'
creation of the device on a dummy VM.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
vgic_v3_setup() unnecessarily initializes the vgic twice. Keep the
initialization after configuring MMIO frames and get rid of the other.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
In order to compel the default usage of EL2 in selftests, move
kvm_arch_vm_post_create() to library code and expose an opt-in for using
MTE by default.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCaNNwBQAKCRAraS+Z+3y5
E8heAQDdJTR9rwAL7gD79cldlHP5PTmjyidLIoFG/efaGSbN1AD9EdvrykDU4xOG
aGaO8TooGUZf7vAL8tIFuMeydYvi/gM=
=Qu4T
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-09-23
We've added 9 non-merge commits during the last 33 day(s) which contain
a total of 10 files changed, 480 insertions(+), 53 deletions(-).
The main changes are:
1) A new bpf_xdp_pull_data kfunc that supports pulling data from
a frag into the linear area of a xdp_buff, from Amery Hung.
This includes changes in the xdp_native.bpf.c selftest, which
Nimrod's future work depends on.
It is a merge from a stable branch 'xdp_pull_data' which has
also been merged to bpf-next.
There is a conflict with recent changes in 'include/net/xdp.h'
in the net-next tree that will need to be resolved.
2) A compiler warning fix when CONFIG_NET=n in the recent dynptr
skb_meta support, from Jakub Sitnicki.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests: drv-net: Pull data before parsing headers
selftests/bpf: Test bpf_xdp_pull_data
bpf: Support specifying linear xdp packet data size for BPF_PROG_TEST_RUN
bpf: Make variables in bpf_prog_test_run_xdp less confusing
bpf: Clear packet pointers after changing packet data in kfuncs
bpf: Support pulling non-linear xdp data
bpf: Allow bpf_xdp_shrink_data to shrink a frag from head and tail
bpf: Clear pfmemalloc flag when freeing all fragments
bpf: Return an error pointer for skb metadata when CONFIG_NET=n
====================
Link: https://patch.msgid.link/20250924050303.2466356-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* for-next/selftests:
kselftest/arm64: Add lsfe to the hwcaps test
kselftest/arm64: Check that unsupported regsets fail in sve-ptrace
kselftest/arm64: Verify that we reject out of bounds VLs in sve-ptrace
kselftest/arm64/gcs/basic-gcs: Respect parent directory CFLAGS
selftests/arm64: Fix grammatical error in string literals
kselftest/arm64: Add parentheses around sizeof for clarity
kselftest/arm64: Supress warning and improve readability
kselftest/arm64: Remove extra blank line
kselftest/arm64/gcs: Use nolibc's getauxval()
kselftest/arm64/gcs: Correctly check return value when disabling GCS
selftests: arm64: Fix -Waddress warning in tpidr2 test
kselftest/arm64: Log error codes in sve-ptrace
selftests: arm64: Check fread return value in exec_target
Add a test case for bug resolved with:
'netfilter: nft_set_pipapo_avx2: fix skip of expired entries'.
It passes on nf.git (it uses the generic/C version for insertion
duplicate check) but fails on unpatched nf-next if AVX2 is supported:
cannot create same element twice 0s [FAIL]
Could create element twice in same transaction
table inet filter { # handle 8
[..]
elements = { 1.2.3.4 . 1.2.4.1 counter packets 0 bytes 0,
1.2.4.1 . 1.2.3.4 counter packets 0 bytes 0,
1.2.3.4 . 1.2.4.1 counter packets 0 bytes 0,
1.2.4.1 . 1.2.3.4 counter packets 0 bytes 0 }
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Adding test to check we can't attach kprobe multi program
that writes to the context.
It's x86_64 specific test.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250916215301.664963-7-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test to check we can't attach standard kprobe program that
writes to the context.
It's x86_64 specific test.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250916215301.664963-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test to check we can change the application execution
through instruction pointer change through uprobe program.
It's x86_64 specific test.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250916215301.664963-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test to check we can change common register values through
uprobe program.
It's x86_64 specific test.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250916215301.664963-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The previous patch fixed an issue whereby no FDB entry would be created for
the bridge itself on VLAN 0 under some circumstances. This could break
forwarding. Add a test for the fix.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/137cc25396f5a4f407267af895a14bc45552ba5f.1758550408.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the following test cases for both IPv4 and IPv6:
* Can change from FDB nexthop to non-FDB nexthop and vice versa.
* Can change FDB nexthop address while in a group.
* Cannot change from FDB nexthop to non-FDB nexthop and vice versa while
in a group.
Output without "nexthop: Forbid FDB status change while nexthop is in a
group":
# ./fib_nexthops.sh -t "ipv6_fdb_grp_fcnal ipv4_fdb_grp_fcnal"
IPv6 fdb groups functional
--------------------------
[...]
TEST: Replace FDB nexthop to non-FDB nexthop [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop [ OK ]
TEST: Replace FDB nexthop address while in a group [ OK ]
TEST: Replace FDB nexthop to non-FDB nexthop while in a group [FAIL]
TEST: Replace non-FDB nexthop to FDB nexthop while in a group [FAIL]
[...]
IPv4 fdb groups functional
--------------------------
[...]
TEST: Replace FDB nexthop to non-FDB nexthop [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop [ OK ]
TEST: Replace FDB nexthop address while in a group [ OK ]
TEST: Replace FDB nexthop to non-FDB nexthop while in a group [FAIL]
TEST: Replace non-FDB nexthop to FDB nexthop while in a group [FAIL]
[...]
Tests passed: 36
Tests failed: 4
Tests skipped: 0
Output with "nexthop: Forbid FDB status change while nexthop is in a
group":
# ./fib_nexthops.sh -t "ipv6_fdb_grp_fcnal ipv4_fdb_grp_fcnal"
IPv6 fdb groups functional
--------------------------
[...]
TEST: Replace FDB nexthop to non-FDB nexthop [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop [ OK ]
TEST: Replace FDB nexthop address while in a group [ OK ]
TEST: Replace FDB nexthop to non-FDB nexthop while in a group [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop while in a group [ OK ]
[...]
IPv4 fdb groups functional
--------------------------
[...]
TEST: Replace FDB nexthop to non-FDB nexthop [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop [ OK ]
TEST: Replace FDB nexthop address while in a group [ OK ]
TEST: Replace FDB nexthop to non-FDB nexthop while in a group [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop while in a group [ OK ]
[...]
Tests passed: 40
Tests failed: 0
Tests skipped: 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250921150824.149157-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test creates non-FDB nexthops without a nexthop device which leads
to the expected failure, but for the wrong reason:
# ./fib_nexthops.sh -t "ipv6_fdb_grp_fcnal ipv4_fdb_grp_fcnal" -v
IPv6 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-nRsN3E nexthop add id 63 via 2001:db8:91::4
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 64 via 2001:db8:91::5
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 103 group 63/64 fdb
Error: Invalid nexthop id.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
[...]
IPv4 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-nRsN3E nexthop add id 14 via 172.16.1.2
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 15 via 172.16.1.3
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 103 group 14/15 fdb
Error: Invalid nexthop id.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
COMMAND: ip -netns me-nRsN3E nexthop add id 16 via 172.16.1.2 fdb
COMMAND: ip -netns me-nRsN3E nexthop add id 17 via 172.16.1.3 fdb
COMMAND: ip -netns me-nRsN3E nexthop add id 104 group 14/15
Error: Invalid nexthop id.
TEST: Non-Fdb Nexthop group with fdb nexthops [ OK ]
[...]
COMMAND: ip -netns me-0dlhyd ro add 172.16.0.0/22 nhid 15
Error: Nexthop id does not exist.
TEST: Route add with fdb nexthop [ OK ]
In addition, as can be seen in the above output, a couple of IPv4 test
cases used the non-FDB nexthops (14 and 15) when they intended to use
the FDB nexthops (16 and 17). These test cases only passed because
failure was expected, but they failed for the wrong reason.
Fix the test to create the non-FDB nexthops with a nexthop device and
adjust the IPv4 test cases to use the FDB nexthops instead of the
non-FDB nexthops.
Output after the fix:
# ./fib_nexthops.sh -t "ipv6_fdb_grp_fcnal ipv4_fdb_grp_fcnal" -v
IPv6 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-lNzfHP nexthop add id 63 via 2001:db8:91::4 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 64 via 2001:db8:91::5 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 103 group 63/64 fdb
Error: FDB nexthop group can only have fdb nexthops.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
[...]
IPv4 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-lNzfHP nexthop add id 14 via 172.16.1.2 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 15 via 172.16.1.3 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 103 group 14/15 fdb
Error: FDB nexthop group can only have fdb nexthops.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
COMMAND: ip -netns me-lNzfHP nexthop add id 16 via 172.16.1.2 fdb
COMMAND: ip -netns me-lNzfHP nexthop add id 17 via 172.16.1.3 fdb
COMMAND: ip -netns me-lNzfHP nexthop add id 104 group 16/17
Error: Non FDB nexthop group cannot have fdb nexthops.
TEST: Non-Fdb Nexthop group with fdb nexthops [ OK ]
[...]
COMMAND: ip -netns me-lNzfHP ro add 172.16.0.0/22 nhid 16
Error: Route cannot point to a fdb nexthop.
TEST: Route add with fdb nexthop [ OK ]
[...]
Tests passed: 30
Tests failed: 0
Tests skipped: 0
Fixes: 0534c5489c ("selftests: net: add fdb nexthop tests")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250921150824.149157-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rtnetlink FOU selftest prints an incorrect string:
"FAIL: fou"s. Change it to the intended "FAIL: fou" by
removing a stray character in the end_test string of the test.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250921192111.1567498-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is possible for drivers to generate xdp packets with data residing
entirely in fragments. To keep parsing headers using direct packet
access, call bpf_xdp_pull_data() to pull headers into the linear data
area.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250922233356.3356453-9-ameryhung@gmail.com
The madv_populate and soft-dirty kselftests currently fail on systems
where CONFIG_MEM_SOFT_DIRTY is disabled.
Introduce a new helper softdirty_supported() into vm_util.c/h to ensure
tests are properly skipped when the feature is not enabled.
Link: https://lkml.kernel.org/r/20250917133137.62802-1-lance.yang@linux.dev
Fixes: 9f3265db6a ("selftests: vm: add test for Soft-Dirty PTE bit")
Signed-off-by: Lance Yang <lance.yang@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Gabriel Krisman Bertazi <krisman@collabora.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Test bpf_xdp_pull_data() with xdp packets with different layouts. The
xdp bpf program first checks if the layout is as expected. Then, it
calls bpf_xdp_pull_data(). Finally, it checks the 0xbb marker at offset
1024 using directly packet access.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250922233356.3356453-8-ameryhung@gmail.com
To test bpf_xdp_pull_data(), an xdp packet containing fragments as well
as free linear data area after xdp->data_end needs to be created.
However, bpf_prog_test_run_xdp() always fills the linear area with
data_in before creating fragments, leaving no space to pull data. This
patch will allow users to specify the linear data size through
ctx->data_end.
Currently, ctx_in->data_end must match data_size_in and will not be the
final ctx->data_end seen by xdp programs. This is because ctx->data_end
is populated according to the xdp_buff passed to test_run. The linear
data area available in an xdp_buff, max_linear_sz, is alawys filled up
before copying data_in into fragments.
This patch will allow users to specify the size of data that goes into
the linear area. When ctx_in->data_end is different from data_size_in,
only ctx_in->data_end bytes of data will be put into the linear area when
creating the xdp_buff.
While ctx_in->data_end will be allowed to be different from data_size_in,
it cannot be larger than the data_size_in as there will be no data to
copy from user space. If it is larger than the maximum linear data area
size, the layout suggested by the user will not be honored. Data beyond
max_linear_sz bytes will still be copied into fragments.
Finally, since it is possible for a NIC to produce a xdp_buff with empty
linear data area, allow it when calling bpf_test_init() from
bpf_prog_test_run_xdp() so that we can test XDP kfuncs with such
xdp_buff. This is done by moving lower-bound check to callers as most of
them already do except bpf_prog_test_run_skb(). The change also fixes a
bug that allows passing an xdp_buff with data < ETH_HLEN. This can
happen when ctx is used and metadata is at least ETH_HLEN.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250922233356.3356453-7-ameryhung@gmail.com
Commit 40863f4d6e ("bpftool: Add support for signing BPF programs")
added new options for "bpftool prog load" and "bpftool gen skeleton".
This commit brings the relevant update to the bash completion file.
We rework slightly the processing of options to make completion more
resilient for options that take an argument.
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/r/20250923103802.57695-1-qmo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull sched_ext/for-6.17-fixes to receive:
55ed11b181 ("sched_ext: idle: Handle migration-disabled tasks in BPF code")
which conflicts with the following commit in for-6.18:
2407bae23d ("sched_ext: Add the @sch parameter to ext_idle helpers")
The conflict is a simple context conflict which can be resolved by taking
the updated parts from both commits.
Signed-off-by: Tejun Heo <tj@kernel.org>
Add test coverage for union argument support using fexit programs:
* 8B union argument - verify that the verifier accepts it and that fexit
programs can trace such functions.
* 16B union argument - verify that the verifier accepts it and that
fexit programs can access the argument, which is passed using two
registers.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20250919044110.23729-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
scx_qmap currently outputs verbose debug messages including cgroup operations
and CPU online/offline events by default, which can be noisy during normal
operation. While the existing -P option controls DSQ dumps and event
statistics, there's no way to suppress the other debug messages.
Split the debug output controls to make scx_qmap quieter by default. The -P
option continues to control DSQ dumps and event statistics
(print_dsqs_and_events), while a new -M option controls debug messages like
cgroup operations and CPU events (print_msgs). This allows users to run
scx_qmap with minimal output and selectively enable debug information as
needed.
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The qmap dump operation was destructively consuming queue entries while
displaying them. As dump can be triggered anytime, this can easily lead to
stalls. Add a temporary dump_store queue and modify the dump logic to pop
entries, display them, and then restore them back to the original queue.
This allows dump operations to be performed without affecting the
scheduler's queue state.
Note that if racing against new enqueues during dump, ordering can get
mixed up, but this is acceptable for debugging purposes.
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add tests for loading 8, 16, and 32 bits with sign extension from arena,
also verify that exception handling is working correctly and correct
assembly is being generated by the x86 and arm64 JITs.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20250923110157.18326-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The prerequisites section listed non-existent packages
"phython-gnuplot" and "phython3-gnuplot", which may mislead users and
cause installation failures.
Update the names to the correct distribution package names
"python-gnuplot" and "python3-gnuplot", helping users avoid confusion
and saving time for those following the instructions.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Add a check in the MSRs test to verify that KVM's reported support for
MSRs with feature bits is consistent between KVM's MSR save/restore lists
and KVM's supported CPUID.
To deal with Intel's wonderful decision to bundle IBT and SHSTK under CET,
track the "second" feature to avoid false failures when running on a CPU
with only one of IBT or SHSTK.
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20250919223258.1604852-51-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add test coverage for the KVM-defined GUEST_SSP "register" in the MSRs
test. While _KVM's_ goal is to not tie the uAPI of KVM-defined registers
to any particular internal implementation, i.e. to not commit in uAPI to
handling GUEST_SSP as an MSR, treating GUEST_SSP as an MSR for testing
purposes is a-ok and is a naturally fit given the semantics of SSP.
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20250919223258.1604852-50-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When KVM_{G,S}ET_ONE_REG are supported, verify that MSRs can be accessed
via ONE_REG and through the dedicated MSR ioctls. For simplicity, run
the test twice, e.g. instead of trying to get MSR values into the exact
right state when switching write methods.
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20250919223258.1604852-49-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a third vCPUs to the MSRs test that runs with all features disabled in
the vCPU's CPUID model, to verify that KVM does the right thing with
respect to emulating accesses to MSRs that shouldn't exist. Use the same
VM to verify that KVM is honoring the vCPU model, e.g. isn't looking at
per-VM state when emulating MSR accesses.
Link: https://lore.kernel.org/r/20250919223258.1604852-48-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend the MSRs test to support {S,U}_CET, which are a bit of a pain to
handled due to the MSRs existing if IBT *or* SHSTK is supported. To deal
with Intel's wonderful decision to bundle IBT and SHSTK under CET, track
the second feature, but skip only RDMSR #GP tests to avoid false failures
when running on a CPU with only one of IBT or SHSTK (the WRMSR #GP tests
are still valid since the enable bits are per-feature).
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20250919223258.1604852-47-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a selftest to verify reads and writes to various MSRs, from both the
guest and host, and expect success/failure based on whether or not the
vCPU supports the MSR according to supported CPUID.
Note, this test is extremely similar to KVM-Unit-Test's "msr" test, but
provides more coverage with respect to host accesses, and will be extended
to provide addition testing of CPUID-based features, save/restore lists,
and KVM_{G,S}ET_ONE_REG, all which are extremely difficult to validate in
KUT.
If kvm.ignore_msrs=true, skip the unsupported and reserved testcases as
KVM's ABI is a mess; what exactly is supposed to be ignored, and when,
varies wildly.
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20250919223258.1604852-46-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Merge the queue of KVM selftests changes for 6.18 to pick up the ex_str()
helper so that it can be used to pretty print expected versus actual
exceptions in a new MSR selftest. CET virtualization will add support for
several MSRs with non-trivial semantics, along with new uAPI for accessing
the guest's Shadow Stack Pointer (SSP) from userspace.
Steal exception_mnemonic() from KVM-Unit-Tests as ex_str() (to keep line
lengths reasonable) and use it in assert messages that currently print the
raw vector number.
Co-developed-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20250919223258.1604852-45-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The TODO about using the number of vCPUs instead of vcpu.id + 1
was already addressed by commit 376bc1b458 ("KVM: selftests: Don't
assume vcpu->id is '0' in xAPIC state test"). The comment is now
stale and can be removed.
Signed-off-by: Sukrut Heroorkar <hsukrut3@gmail.com>
Link: https://lore.kernel.org/r/20250908210547.12748-1-hsukrut3@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a PMU errata framework and use it to relax precise event counts on
Atom platforms that overcount "Instruction Retired" and "Branch Instruction
Retired" events, as the overcount issues on VM-Exit/VM-Entry are impossible
to prevent from userspace, e.g. the test can't prevent host IRQs.
Setup errata during early initialization and automatically sync the mask
to VMs so that tests can check for errata without having to manually
manage host=>guest variables.
For Intel Atom CPUs, the PMU events "Instruction Retired" or
"Branch Instruction Retired" may be overcounted for some certain
instructions, like FAR CALL/JMP, RETF, IRET, VMENTRY/VMEXIT/VMPTRLD
and complex SGX/SMX/CSTATE instructions/flows.
The detailed information can be found in the errata (section SRF7):
https://edc.intel.com/content/www/us/en/design/products-and-solutions/processors-and-chipsets/sierra-forest/xeon-6700-series-processor-with-e-cores-specification-update/errata-details/
For the Atom platforms before Sierra Forest (including Sierra Forest),
Both 2 events "Instruction Retired" and "Branch Instruction Retired" would
be overcounted on these certain instructions, but for Clearwater Forest
only "Instruction Retired" event is overcounted on these instructions.
Signed-off-by: dongsheng <dongsheng.x.zhang@intel.com>
Co-developed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: Yi Lai <yi1.lai@intel.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20250919214648.1585683-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add support for 5 new architectural events (4 topdown level 1 metrics
events and LBR inserts event) that will first show up in Intel's
Clearwater Forest CPUs. Detailed info about the new events can be found
in SDM section 21.2.7 "Pre-defined Architectural Performance Events".
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: Yi Lai <yi1.lai@intel.com>
[sean: drop "unavailable_mask" changes]
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20250919214648.1585683-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reduce the number of combinations of unavailable PMU events masks that are
testing by the PMU counters test. In reality, testing every possible
combination isn't all that interesting, and certainly not worth the tens
of seconds (or worse, minutes) of runtime. Fully testing the N^2 space
will be especially problematic in the near future, as 5! new arch events
are on their way.
Use alternating bit patterns (and 0 and -1u) in the hopes that _if_ there
is ever a KVM bug, it's not something horribly convoluted that shows up
only with a super specific pattern/value.
Reported-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20250919214648.1585683-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Track the mask of "unavailable" PMU events as a 32-bit value. While bits
31:9 are currently reserved, silently truncating those bits is unnecessary
and asking for missed coverage. To avoid running afoul of the sanity check
in vcpu_set_cpuid_property(), explicitly adjust the mask based on the
non-reserved bits as reported by KVM's supported CPUID.
Opportunistically update the "all ones" testcase to pass -1u instead of
0xff.
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20250919214648.1585683-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
A new bit PERF_CAPABILITIES[17] called "PEBS_TIMING_INFO" bit is added
to indicated if PEBS supports to record timing information in a new
"Retried Latency" field.
Since KVM requires user can only set host consistent PEBS capabilities,
otherwise the PERF_CAPABILITIES setting would fail, add pebs_timing_info
into the "immutable_caps" to block host inconsistent PEBS configuration
and cause errors.
Opportunistically drop the anythread_deprecated bit. It isn't and likely
never was a PERF_CAPABILITIES flag, the test's definition snuck in when
the union was copy+pasted from the kernel's definition.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: Yi Lai <yi1.lai@intel.com>
[sean: call out anythread_deprecated change]
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20250919214648.1585683-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add stress tests for BPF task-work scheduling kfuncs. The tests spawn
multiple threads that concurrently schedule task_work callbacks against
the same and different map values to exercise the kfuncs under high
contention.
Verify callbacks are reliably enqueued and executed with no drops.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20250923112404.668720-10-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introducing selftests that check BPF task work scheduling mechanism.
Validate that verifier does not accepts incorrect calls to
bpf_task_work_schedule kfunc.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250923112404.668720-9-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds necessary plumbing in verifier, syscall and maps to
support handling new kfunc bpf_task_work_schedule and kernel structure
bpf_task_work. The idea is similar to how we already handle bpf_wq and
bpf_timer.
verifier changes validate calls to bpf_task_work_schedule to make sure
it is safe and expected invariants hold.
btf part is required to detect bpf_task_work structure inside map value
and store its offset, which will be used in the next patch to calculate
key and value addresses.
arraymap and hashtab changes are needed to handle freeing of the
bpf_task_work: run code needed to deinitialize it, for example cancel
task_work callback if possible.
The use of bpf_task_work and proper implementation for kfuncs are
introduced in the next patch.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250923112404.668720-6-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
New device support
==================
ad,ade9000
- New driver for this complex energy and power monitoring ADC.
infineon,tlv493d
- New driver for this 3D magnetic sensor.
intel,dollar
- New driver for this TI PMIC (part number unknown)
marvel,88pm886
- Driver for this PMIC ADC.
microchip,mcp9600
- Add explicit support for the mcp9601 which has some additional features
over the mcp9600.
rohm,bd79112
- New driver for this ADC / GPIO Chip.
Features
========
Core
- New helper to multiply data expressed in IIO types.
- Add KUnit tests.
- New IIO_ALTCURRENT type, similar to existing IIO_ALTVOLTAGE
- Add some channel modifiers related to energy and power, such as
reactive.
adi,ad7124
- Support external clocks sources and output of the internal clocks.
- Filter control.
adi,ad7173
- Add filter support. Some fiddly interactions with other parameters on this
device.
adi,ad7779
- Add backend support which required control of the number of lanes used.
liteon,ltr390
- Add runtime PM support.
microchip,mcp9600
- Add support for different thermocouple types.
Cleanup and minor fixes
=======================
core
- Switch info_mask fields to be unsigned. Not clear why they were ever
signed.
- Fix handling of negative channel scale in iio_convert_raw_to_processed()
- Fix offset handling for channels without a scale attribute.
- Improve the precision of scaling slightly.
- Drop apparent handling of IIO_CHAN_INFO_PROCESSED for devices that don't
have any such channels.
various
- Drop many pm_runtime_mark_last_busy() calls now
pm_runtime_put_autosuspend() calls it internally.
- Drop dev_err_probe() calls where the error code is hard coded as -ENOMEM
as they don't do anything.
- Drop dev_err() calls where the error code is -ENOMEM. This will reduce
error prints, but memory failures generate a lot of messages anyway
so unlikely we need these prints.
current-sense-amplifier
- Add #io-channels property this channel to be used by a consumer driver.
adi,ad7124
- Fix incorrect clocks dt-binding property.
- Make the mclk clock optional in DT - this is internal to the ADC so should
never have been in he binding.
- Fix up sample rate to comply with ABI.
- Use read_avail() callback rather than opencoding similar.
- Deploy guard() to clean up some lock handling.
adi,ad7768
- Use devm_regulator_get_enable_read_voltage() to replace similar code.
adi,ad7816
- Drop an unnecessary dev_set_drvdata() call as nothing uses the data.
ad,adxl345
- Fix missing blank line before bullet list in documentation.
arm,scmi
- Use devm_kcalloc() for an array allocation rather than devm_kzalloc().
bosch,bmi270
- Match an ACPI ID seen in the wild. It is not spec compliant but we can't
do much about that.
bosch,bmp280
- Drop overly noisy dev_info()
- Allow for sleeping gpio controllers.
gogle,cros-ec
- Drop unused location attribute that has been replaced by label.
invense,icm42600
- Simplify the power management.
- Use guard() to simplify some locking.
maxim,max1238
- Add io-channel-cells property to dt-binding as there is an in tree
consumer.
microchip,mcp9600
- Specify a default value in dt-binding for the thermocouple type
- General whitespace cleanup.
samsung,exynos
- Drop support for the S3C2410 including bindings, and touchscreen support
as nothing else uses that.
- Drop platform ID based binding as not used.
st,vl53l0x
- Fix returning the wrong variable in an error path.
ti,pac1934
- Replace open coded devm_mutex_init().
xilinx,ams
- Update maintainers entry.
-----BEGIN PGP SIGNATURE-----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=iOJF
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.18a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: New device support, features and cleanup for 6.18
New device support
==================
ad,ade9000
- New driver for this complex energy and power monitoring ADC.
infineon,tlv493d
- New driver for this 3D magnetic sensor.
intel,dollar
- New driver for this TI PMIC (part number unknown)
marvel,88pm886
- Driver for this PMIC ADC.
microchip,mcp9600
- Add explicit support for the mcp9601 which has some additional features
over the mcp9600.
rohm,bd79112
- New driver for this ADC / GPIO Chip.
Features
========
Core
- New helper to multiply data expressed in IIO types.
- Add KUnit tests.
- New IIO_ALTCURRENT type, similar to existing IIO_ALTVOLTAGE
- Add some channel modifiers related to energy and power, such as
reactive.
adi,ad7124
- Support external clocks sources and output of the internal clocks.
- Filter control.
adi,ad7173
- Add filter support. Some fiddly interactions with other parameters on this
device.
adi,ad7779
- Add backend support which required control of the number of lanes used.
liteon,ltr390
- Add runtime PM support.
microchip,mcp9600
- Add support for different thermocouple types.
Cleanup and minor fixes
=======================
core
- Switch info_mask fields to be unsigned. Not clear why they were ever
signed.
- Fix handling of negative channel scale in iio_convert_raw_to_processed()
- Fix offset handling for channels without a scale attribute.
- Improve the precision of scaling slightly.
- Drop apparent handling of IIO_CHAN_INFO_PROCESSED for devices that don't
have any such channels.
various
- Drop many pm_runtime_mark_last_busy() calls now
pm_runtime_put_autosuspend() calls it internally.
- Drop dev_err_probe() calls where the error code is hard coded as -ENOMEM
as they don't do anything.
- Drop dev_err() calls where the error code is -ENOMEM. This will reduce
error prints, but memory failures generate a lot of messages anyway
so unlikely we need these prints.
current-sense-amplifier
- Add #io-channels property this channel to be used by a consumer driver.
adi,ad7124
- Fix incorrect clocks dt-binding property.
- Make the mclk clock optional in DT - this is internal to the ADC so should
never have been in he binding.
- Fix up sample rate to comply with ABI.
- Use read_avail() callback rather than opencoding similar.
- Deploy guard() to clean up some lock handling.
adi,ad7768
- Use devm_regulator_get_enable_read_voltage() to replace similar code.
adi,ad7816
- Drop an unnecessary dev_set_drvdata() call as nothing uses the data.
ad,adxl345
- Fix missing blank line before bullet list in documentation.
arm,scmi
- Use devm_kcalloc() for an array allocation rather than devm_kzalloc().
bosch,bmi270
- Match an ACPI ID seen in the wild. It is not spec compliant but we can't
do much about that.
bosch,bmp280
- Drop overly noisy dev_info()
- Allow for sleeping gpio controllers.
gogle,cros-ec
- Drop unused location attribute that has been replaced by label.
invense,icm42600
- Simplify the power management.
- Use guard() to simplify some locking.
maxim,max1238
- Add io-channel-cells property to dt-binding as there is an in tree
consumer.
microchip,mcp9600
- Specify a default value in dt-binding for the thermocouple type
- General whitespace cleanup.
samsung,exynos
- Drop support for the S3C2410 including bindings, and touchscreen support
as nothing else uses that.
- Drop platform ID based binding as not used.
st,vl53l0x
- Fix returning the wrong variable in an error path.
ti,pac1934
- Replace open coded devm_mutex_init().
xilinx,ams
- Update maintainers entry.
* tag 'iio-for-6.18a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (178 commits)
MAINTAINERS: Support ROHM BD79112 ADC
iio: adc: Support ROHM BD79112 ADC/GPIO
dt-bindings: iio: adc: ROHM BD79112 ADC/GPIO
iio: pressure: bmp280: Use gpiod_set_value_cansleep()
iio: pressure: bmp280: Remove noisy dev_info()
iio: ABI: add filter types for ad7173
iio: adc: ad7173: support changing filter type
iio: adc: ad7173: rename odr field
iio: adc: ad7173: rename ad7173_chan_spec_ext_info
iio: adc: Add driver for Marvell 88PM886 PMIC ADC
dt-bindings: mfd: 88pm886: Add #io-channel-cells
iio: ABI: document "sinc4+rej60" filter_type
iio: adc: ad7124: add filter support
iio: adc: ad7124: support fractional sampling_frequency
iio: adc: ad7124: use guard(mutex) to simplify return paths
iio: adc: ad7124: use read_avail() for scale_available
iio: adc: ad7124: use clamp()
iio: adc: ad7124: fix sample rate for multi-channel use
Documentation: ABI: iio: add sinc4+lp
docs: iio: add documentation for ade9000 driver
...
Exercise the scenario described in detail in the cover letter:
1) socket A: connect() from ephemeral port X
2) socket B: explicitly bind() to port X
3) check that port X is now excluded from ephemeral ports
4) close socket B to release the port bind
5) socket C: connect() from ephemeral port X
As well as a corner case to test that the connect-bind flag is cleared:
1) connect() from ephemeral port X
2) disconnect the socket with connect(AF_UNSPEC)
3) bind() it explicitly to port X
4) check that port X is now excluded from ephemeral ports
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://patch.msgid.link/20250917-update-bind-bucket-state-on-unhash-v5-2-57168b661b47@cloudflare.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In commit bb666b7c27 ("mm: add mmap_prepare() compatibility layer for
nested file systems") we introduced the ability for stacked drivers and
file systems to correctly invoke the f_op->mmap_prepare() handler from an
f_op->mmap() handler via a compatibility layer implemented in
compat_vma_mmap_prepare().
This populates vm_area_desc fields according to those found in the (not
yet fully initialised) VMA passed to f_op->mmap().
However this function implicitly assumes that the struct file which we are
operating upon is equal to vma->vm_file. This is not a safe assumption in
all cases.
The only really sane situation in which this matters would be something
like e.g. i915_gem_dmabuf_mmap() which invokes vfs_mmap() against
obj->base.filp:
ret = vfs_mmap(obj->base.filp, vma);
if (ret)
return ret;
And then sets the VMA's file to this, should the mmap operation succeed:
vma_set_file(vma, obj->base.filp);
That is - it is the file that is intended to back the VMA mapping.
This is not an issue currently, as so far we have only implemented
f_op->mmap_prepare() handlers for some file systems and internal mm uses,
and the only stacked f_op->mmap() operations that can be performed upon
these are those in backing_file_mmap() and coda_file_mmap(), both of which
use vma->vm_file.
However, moving forward, as we convert drivers to using
f_op->mmap_prepare(), this will become a problem.
Resolve this issue by explicitly setting desc->file to the provided file
parameter and update callers accordingly.
Callers are expected to read desc->file and update desc->vm_file - the
former will be the file provided by the caller (if stacked, this may
differ from vma->vm_file).
If the caller needs to differentiate between the two they therefore now
can.
While we are here, also provide a variant of compat_vma_mmap_prepare()
that operates against a pointer to any file_operations struct and does not
assume that the file_operations struct we are interested in is file->f_op.
This function is __compat_vma_mmap_prepare() and we invoke it from
compat_vma_mmap_prepare() so that we share code between the two functions.
This is important, because some drivers provide hooks in a separate
struct, for instance struct drm_device provides an fops field for this
purpose.
Also update the VMA selftests accordingly.
Link: https://lkml.kernel.org/r/dd0c72df8a33e8ffaa243eeb9b01010b670610e9.1756920635.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: do not assume file == vma->vm_file in
compat_vma_mmap_prepare()", v2.
As part of the efforts to eliminate the problematic f_op->mmap callback, a
new callback - f_op->mmap_prepare was provided.
While we are converting these callbacks, we must deal with 'stacked'
filesystems and drivers - those which in their own f_op->mmap callback
invoke an inner f_op->mmap callback.
To accomodate for this, a compatibility layer is provided that, via
vfs_mmap(), detects if f_op->mmap_prepare is provided and if so, generates
a vm_area_desc containing the VMA's metadata and invokes the call.
So far, we have provided desc->file equal to vma->vm_file. However this
is not necessarily valid, especially in the case of stacked drivers which
wish to assign a new file after the inner hook is invoked.
To account for this, we adjust vm_area_desc to have both file and vm_file
fields. The .vm_file field is strictly set to vma->vm_file (or in the
case of a new mapping, what will become vma->vm_file).
However, .file is set to whichever file vfs_mmap() is invoked with when
using the compatibilty layer.
Therefore, if the VMA's file needs to be updated in .mmap_prepare,
desc->vm_file should be assigned, whilst desc->file should be read.
No current f_op->mmap_prepare users assign desc->file so this is safe to
do.
This makes the .mmap_prepare callback in the context of a stacked
filesystem or driver completely consistent with the existing .mmap
implementations.
While we're here, we do a few small cleanups, and ensure that we const-ify
things correctly in the vm_area_desc struct to avoid hooks accidentally
trying to assign fields they should not.
This patch (of 2):
Stacked filesystems and drivers may invoke mmap hooks with a struct file
pointer that differs from the overlying file. We will make this
functionality possible in a subsequent patch.
In order to prepare for this, let's update vm_area_struct to separately
provide desc->file and desc->vm_file parameters.
The desc->file parameter is the file that the hook is expected to operate
upon, and is not assignable (though the hok may wish to e.g. update the
file's accessed time for instance).
The desc->vm_file defaults to what will become vma->vm_file and is what
the hook must reassign should it wish to change the VMA"s vma->vm_file.
For now we keep desc->file, vm_file the same to remain consistent.
No f_op->mmap_prepare() callback sets a new vma->vm_file currently, so
this is safe to change.
While we're here, make the mm_struct desc->mm pointers at immutable as
well as the desc->mm field itself.
As part of this change, also update the single hook which this would
otherwise break - mlock_future_ok(), invoked by secretmem_mmap_prepare()).
We additionally update set_vma_from_desc() to compare fields in a more
logical fashion, checking the (possibly) user-modified fields as the first
operand against the existing value as the second one.
Additionally, update VMA tests to accommodate changes.
Link: https://lkml.kernel.org/r/cover.1756920635.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/3fa15a861bb7419f033d22970598aa61850ea267.1756920635.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Pedro Falcato <pfalcato@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The test harness uses the verify_sig_setup.sh to generate the required
key material for program signing.
Generate key material for signing LSKEL some lskel programs and use
xxd to convert the verification certificate into a C header file.
Finally, update the main test runner to load this
certificate into the session keyring via the add_key() syscall before
executing any tests. Use the session keyring in the tests with signed
programs.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/r/20250921160120.9711-6-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Two modes of operation being added:
Add two modes of operation:
* For prog load, allow signing a program immediately before loading. This
is essential for command-line testing and administration.
bpftool prog load -S -k <private_key> -i <identity_cert> fentry_test.bpf.o
* For gen skeleton, embed a pre-generated signature into the C skeleton
file. This supports the use of signed programs in compiled applications.
bpftool gen skeleton -S -k <private_key> -i <identity_cert> fentry_test.bpf.o
Generation of the loader program and its metadata map is implemented in
libbpf (bpf_obj__gen_loader). bpftool generates a skeleton that loads
the program and automates the required steps: freezing the map, creating
an exclusive map, loading, and running. Users can use standard libbpf
APIs directly or integrate loader program generation into their own
toolchains.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/r/20250921160120.9711-5-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To fulfill the BPF signing contract, represented as Sig(I_loader ||
H_meta), the generated trusted loader program must verify the integrity
of the metadata. This signature cryptographically binds the loader's
instructions (I_loader) to a hash of the metadata (H_meta).
The verification process is embedded directly into the loader program.
Upon execution, the loader loads the runtime hash from struct bpf_map
i.e. BPF_PSEUDO_MAP_IDX and compares this runtime hash against an
expected hash value that has been hardcoded directly by
bpf_obj__gen_loader.
The load from bpf_map can be improved by calling
BPF_OBJ_GET_INFO_BY_FD from the kernel context after BPF_OBJ_GET_INFO_BY_FD
has been updated for being called from the kernel context.
The following instructions are generated:
ld_imm64 r1, const_ptr_to_map // insn[0].src_reg == BPF_PSEUDO_MAP_IDX
r2 = *(u64 *)(r1 + 0);
ld_imm64 r3, sha256_of_map_part1 // constant precomputed by
bpftool (part of H_meta)
if r2 != r3 goto out;
r2 = *(u64 *)(r1 + 8);
ld_imm64 r3, sha256_of_map_part2 // (part of H_meta)
if r2 != r3 goto out;
r2 = *(u64 *)(r1 + 16);
ld_imm64 r3, sha256_of_map_part3 // (part of H_meta)
if r2 != r3 goto out;
r2 = *(u64 *)(r1 + 24);
ld_imm64 r3, sha256_of_map_part4 // (part of H_meta)
if r2 != r3 goto out;
...
Signed-off-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/r/20250921160120.9711-4-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* The metadata map is created with as an exclusive map (with an
excl_prog_hash) This restricts map access exclusively to the signed
loader program, preventing tampering by other processes.
* The map is then frozen, making it read-only from userspace.
* BPF_OBJ_GET_INFO_BY_ID instructs the kernel to compute the hash of the
metadata map (H') and store it in bpf_map->sha.
* The loader is then loaded with the signature which is then verified by
the kernel.
loading signed programs prebuilt into the kernel are not currently
supported. These can supported by enabling BPF_OBJ_GET_INFO_BY_ID to be
called from the kernel.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/r/20250921160120.9711-3-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch extends the BPF_PROG_LOAD command by adding three new fields
to `union bpf_attr` in the user-space API:
- signature: A pointer to the signature blob.
- signature_size: The size of the signature blob.
- keyring_id: The serial number of a loaded kernel keyring (e.g.,
the user or session keyring) containing the trusted public keys.
When a BPF program is loaded with a signature, the kernel:
1. Retrieves the trusted keyring using the provided `keyring_id`.
2. Verifies the supplied signature against the BPF program's
instruction buffer.
3. If the signature is valid and was generated by a key in the trusted
keyring, the program load proceeds.
4. If no signature is provided, the load proceeds as before, allowing
for backward compatibility. LSMs can chose to restrict unsigned
programs and implement a security policy.
5. If signature verification fails for any reason,
the program is not loaded.
Tested-by: syzbot@syzkaller.appspotmail.com
Signed-off-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/r/20250921160120.9711-2-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
server-side info linked to the MPTCP connect/established events can now
come from the flags, in addition to the dedicated attribute.
The attribute is now deprecated -- in favour of the new flag, and will
be removed later on.
Print this info only once.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250919-net-next-mptcp-server-side-flag-v1-4-a97a5d561a8b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This attribute is a boolean. No need to add it to set it to 'false'.
Indeed, the default value when this attribute is not set is naturally
'false'. A few bytes can then be saved by not adding this attribute if
the connection is not on the server side.
This prepares the future deprecation of its attribute, in favour of a
new flag.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250919-net-next-mptcp-server-side-flag-v1-1-a97a5d561a8b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Quoted from musl wiki:
GNU getopt permutes argv to pull options to the front, ahead of
non-option arguments. musl and the POSIX standard getopt stop
processing options at the first non-option argument with no
permutation.
Thus these scripts stop working on musl since non-option arguments for
tools using getopt() (in this case, (ar)ping) do not always come last.
Fix it by reordering arguments.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250919053538.1106753-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two user triggerable UAFs:
- Possible race UAF setting up mmaps
- Syzkaller found UAF when erroring an file descriptor creation ioctl due
to the fput() work queue.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaNFXCgAKCRCFwuHvBreF
YXoFAP9xzBDOVp64CJBY8cD/URaQc8t55b8uJCYgxbDesQa4iAEAxTX9gdZ7Lr6Z
THwdY00LI040gBHUxIZOaXNeOhuPIg8=
=DQIy
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Fix two user triggerable use-after-free issues:
- Possible race UAF setting up mmaps
- Syzkaller found UAF when erroring an file descriptor creation ioctl
due to the fput() work queue"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Update the fail_nth limit
iommufd: WARN if an object is aborted with an elevated refcount
iommufd: Fix race during abort for file descriptors
iommufd: Fix refcounting race during mmap
Remove the IsBranch flag from ENTER and LEAVE in KVM's emulator, as ENTER
and LEAVE are stack operations, not branches. Add forced emulation of
said instructions to the PMU counters test to prove that KVM diverges from
hardware, and to guard against regressions.
Opportunistically add a missing "1 MOV" to the selftest comment regarding
the number of instructions per loop, which commit 7803339fa9 ("KVM:
selftests: Use data load to trigger LLC references/misses in Intel PMU")
forgot to add.
Fixes: 018d70ffcf ("KVM: x86: Update vPMCs when retiring branch instructions")
Cc: Jim Mattson <jmattson@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20250919004639.1360453-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Since the opaque is fixed in size, the caller already knows how many
bytes were decoded, on success. Thus, xdr_stream_decode_opaque_fixed()
doesn't need to return that value. And, xdr_stream_decode_u32 and _u64
both return zero on success.
This patch simplifies the caller's error checking to avoid potential
integer promotion issues.
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The while loop doesn't execute and following warning gets generated:
protection_keys.c:561:15: warning: code will never be executed
[-Wunreachable-code]
int rpkey = alloc_random_pkey();
Let's enable the while loop such that it gets executed nr_iterations
times. Simplify the code a bit as well.
Link: https://lkml.kernel.org/r/20250912123025.1271051-3-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/mm: Add -Wunreachable-code and fix warnings".
Add -Wunreachable-code to selftests and remove dead code from generated
warnings.
This patch (of 2):
Enable -Wunreachable-code flag to catch dead code and fix them.
1. Remove the dead code and write a comment instead:
hmm-tests.c:2033:3: warning: code will never be executed
[-Wunreachable-code]
perror("Should not reach this\n");
^~~~~~
2. ksft_exit_fail_msg() calls exit(). So cleanup isn't done. Replace it
with ksft_print_msg().
split_huge_page_test.c:301:3: warning: code will never be executed
[-Wunreachable-code]
goto cleanup;
^~~~~~~~~~~~
3. Remove duplicate inline.
pkey_sighandler_tests.c:44:15: warning: duplicate 'inline' declaration
specifier [-Wduplicate-decl-specifier]
static inline __always_inline
Link: https://lkml.kernel.org/r/20250912123025.1271051-1-usama.anjum@collabora.com
Link: https://lkml.kernel.org/r/20250912123025.1271051-2-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This macro gets used in different tests. Add it to kselftest.h which is
central location and tests use this header. Then use this new macro.
Link: https://lkml.kernel.org/r/20250912125102.1309796-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Antonio Quartulli <antonio@openvpn.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kacinski <kuba@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: "Sabrina Dubroca" <sd@queasysnail.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Simon Horman <horms@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We recently missed detecting an issue during early testing because the
default (!all) tests would not trigger it and even when running "all"
tests it only would happen sometimes because of races.
So let's allow for an easy way to specify "GUP all pages in a single
call", extend the test matrix and extend our default (!all) tests.
By GUP'ing all pages in a single call, with the default size of 128MiB
we'll cover multiple leaf page tables / PMDs on architectures with sane
THP sizes.
Link: https://lkml.kernel.org/r/20250910093051.1693097-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As of v6.8 commit 7fbb5e1882 ("mm: remove VM_EXEC requirement for THP
eligibility") thp collapse no longer requires file-backed mappings be
created with PROT_EXEC.
Remove the overly-strict dependency from thp collapse tests so we test the
least-strict requirement for success.
Link: https://lkml.kernel.org/r/20250909190534.512801-1-zokeefe@google.com
Signed-off-by: Zach O'Keefe <zokeefe@google.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The test will fail as below on x86_64 with cpu la57 support (will skip if
no la57 support). Note, the test requries nr_hugepages to be set first.
# running bash ./va_high_addr_switch.sh
# -------------------------------------
# mmap(addr_switch_hint - pagesize, pagesize): 0x7f55b60fa000 - OK
# mmap(addr_switch_hint - pagesize, (2 * pagesize)): 0x7f55b60f9000 - OK
# mmap(addr_switch_hint, pagesize): 0x800000000000 - OK
# mmap(addr_switch_hint, 2 * pagesize, MAP_FIXED): 0x800000000000 - OK
# mmap(NULL): 0x7f55b60f9000 - OK
# mmap(low_addr): 0x40000000 - OK
# mmap(high_addr): 0x1000000000000 - OK
# mmap(high_addr) again: 0xffff55b6136000 - OK
# mmap(high_addr, MAP_FIXED): 0x1000000000000 - OK
# mmap(-1): 0xffff55b6134000 - OK
# mmap(-1) again: 0xffff55b6132000 - OK
# mmap(addr_switch_hint - pagesize, pagesize): 0x7f55b60fa000 - OK
# mmap(addr_switch_hint - pagesize, 2 * pagesize): 0x7f55b60f9000 - OK
# mmap(addr_switch_hint - pagesize/2 , 2 * pagesize): 0x7f55b60f7000 - OK
# mmap(addr_switch_hint, pagesize): 0x800000000000 - OK
# mmap(addr_switch_hint, 2 * pagesize, MAP_FIXED): 0x800000000000 - OK
# mmap(NULL, MAP_HUGETLB): 0x7f55b5c00000 - OK
# mmap(low_addr, MAP_HUGETLB): 0x40000000 - OK
# mmap(high_addr, MAP_HUGETLB): 0x1000000000000 - OK
# mmap(high_addr, MAP_HUGETLB) again: 0xffff55b5e00000 - OK
# mmap(high_addr, MAP_FIXED | MAP_HUGETLB): 0x1000000000000 - OK
# mmap(-1, MAP_HUGETLB): 0x7f55b5c00000 - OK
# mmap(-1, MAP_HUGETLB) again: 0x7f55b5a00000 - OK
# mmap(addr_switch_hint - pagesize, 2*hugepagesize, MAP_HUGETLB): 0x800000000000 - FAILED
# mmap(addr_switch_hint , 2*hugepagesize, MAP_FIXED | MAP_HUGETLB): 0x800000000000 - OK
# [FAIL]
addr_switch_hint is defined as DFEFAULT_MAP_WINDOW in the failed test (for
x86_64, DFEFAULT_MAP_WINDOW is defined as (1UL<<47) - pagesize) in 64 bit.
Before commit cc92882ee2 ("mm: drop hugetlb_get_unmapped_area{_*}
functions"), for x86_64 hugetlb_get_unmapped_area() is handled in arch
code arch/x86/mm/hugetlbpage.c and addr is checked with
map_address_hint_valid() after align with 'addr &= huge_page_mask(h)'
which is a round down way, and it will fail the check because the addr is
within the DEFAULT_MAP_WINDOW but (addr + len) is above the
DFEFAULT_MAP_WINDOW. So it wil go through the
hugetlb_get_unmmaped_area_top_down() to find an area within the
DFEFAULT_MAP_WINDOW.
After commit cc92882ee2 ("mm: drop hugetlb_get_unmapped_area{_*}
functions"). The addr hint for hugetlb_get_unmmaped_area() will be
rounded up and aligned to hugepage size with ALIGN() for all arches. And
after the align, the addr will be above the default MAP_DEFAULT_WINDOW,
and the map_addresshint_valid() check will pass because both aligned addr
(addr0) and (addr + len) are above the DEFAULT_MAP_WINDOW, and the aligned
hint address (0x800000000000) is returned as an suitable gap is found
there, in arch_get_unmapped_area_topdown().
To still cover the case that addr is within the DEFAULT_MAP_WINDOW, and
addr + len is above the DFEFAULT_MAP_WINDOW, change to choose the last
hugepage aligned address within the DEFAULT_MAP_WINDOW as the hint addr,
and the addr + len (2 hugepages) will be one hugepage above the
DEFAULT_MAP_WINDOW. An aligned address won't be affected by the page
round up or round down from kernel, so it's determistic.
Link: https://lkml.kernel.org/r/20250912013711.3002969-4-chuhu@redhat.com
Fixes: cc92882ee2 ("mm: drop hugetlb_get_unmapped_area{_*} functions")
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alloc hugepages in the test internally, so we don't fully rely on the
run_vmtests.sh. If run_vmtests.sh does that great, free hugepages is
enough for being used to run the test, leave it as it is, otherwise setup
the hugepages in the test.
Save the original nr_hugepages value and restore it after test finish, so
leave a stable test envronment.
Link: https://lkml.kernel.org/r/20250912013711.3002969-3-chuhu@redhat.com
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Fix va_high_addr_switch.sh test failure", v3.
These three patches fix the va_high_addr_switch.sh test failure on x86_64.
Patch 1 fixes the hugepage setup issue that nr_hugepages is reset too
early in run_vmtests.sh and break the later va_high_addr_switch testing.
Patch 2 adds hugepage setup in va_high_addr_switch test, so that it can
still work if vm_runtests.sh changes the hugepage setup someday.
Patch 3 fixes the test failure caused by the hint addr align method change
in hugetlb_get_unmapped_area().
This patch (of 3):
The nr_hugepgs variable is used to keep the original nr_hugepages at the
hugepage setup step at test beginning. After userfaultfd test, a cleaup
is executed, both /sys/kernel/mm/hugepages/hugepages-*/nr_hugepages and
/proc/sys//vm/nr_hugepages are reset to 'original' value before
userfaultfd test starts.
Issue here is the value used to restore /proc/sys/vm/nr_hugepages is
nr_hugepgs which is the initial value before the vm_runtests.sh runs, not
the value before userfaultfd test starts. 'va_high_addr_swith.sh' tests
runs after that will possibly see no hugepages available for test, and got
EINVAL when mmap(HUGETLB), making the result invalid.
And before pkey tests, nr_hugepgs is changed to be used as a temp variable
to save nr_hugepages before pkey test, and restore it after pkey tests
finish. The original nr_hugepages value is not tracked anymore, so no way
to restore it after all tests finish.
Add a new variable orig_nr_hugepgs to save the original nr_hugepages, and
and restore it to nr_hugepages after all tests finish. And change to use
the nr_hugepgs variable to save the /proc/sys/vm/nr_hugeages after
hugepage setup, it's also the value before userfaultfd test starts, and
the correct value to be restored after userfaultfd finishes. The
va_high_addr_switch.sh broken will be resolved.
Link: https://lkml.kernel.org/r/20250912013711.3002969-1-chuhu@redhat.com
Link: https://lkml.kernel.org/r/20250912013711.3002969-2-chuhu@redhat.com
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is room for improvement, so let's clean up a bit:
(1) Define "4" as a constant.
(2) SKIP if we fail to allocate all THPs (e.g., fragmented) and add
recovery code for all other failure cases: no need to exit the test.
(3) Rename "len" to thp_area_size, and "one_page" to "thp_area".
(4) Allocate a new area "page_area" into which we will mremap the
pages; add "page_area_size". Now we can easily merge the two
mremap instances into a single one.
(5) Iterate THPs instead of bytes when checking for missed THPs after
mremap.
(6) Rename "pte_mapped2" to "tmp", used to verify mremap(MAP_FIXED)
result.
(7) Split the corruption test from the failed-split test, so we can just
iterate bytes vs. thps naturally.
(8) Extend comments and clarify why we are using mremap in the first
place.
Link: https://lkml.kernel.org/r/20250903070253.34556-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements", v2.
One fix for occasional failures I found while testing and a bunch of
cleanups that should make that test easier to digest.
This patch (of 2):
When checking for actual tail or head pages of a folio, we must make sure
that the KPF_COMPOUND_HEAD/KPF_COMPOUND_TAIL flag is paired with KPF_THP.
For example, if we have another large folio after our large folio in
physical memory, our "pfn_flags & (KPF_THP | KPF_COMPOUND_TAIL)" would
trigger even though it's actually a head page of the next folio.
If is_backed_by_folio() returns a wrong result, split_pte_mapped_thp() can
fail with "Some THPs are missing during mremap".
Fix it by checking for head/tail pages of folios properly. Add
folio_tail_flags/folio_head_flags to improve readability and use these
masks also when just testing for any compound page.
Link: https://lkml.kernel.org/r/20250903070253.34556-1-david@redhat.com
Link: https://lkml.kernel.org/r/20250903070253.34556-2-david@redhat.com
Fixes: 169b456b0162 ("selftests/mm: reimplement is_backed_by_thp() with more precise check")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now that all users are gone, let's remove it.
Link: https://lkml.kernel.org/r/20250901150359.867252-38-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It's no longer user-selectable (and the default was already "y"), so let's
just drop it.
It was never really relevant to the wireguard selftests either way.
Link: https://lkml.kernel.org/r/20250901150359.867252-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The current code incorrectly accesses buffer[strlen(buffer)], which points
to the null terminator ('\0') at the end of the string. This is
technically out-of-bounds access since valid string content ends at index
strlen(buffer)-1.
Fix by:
1. Declaring strlen() result variable at function scope
2. Adding bounds check (len > 0) to handle empty strings
3. Using buffer[len-1] to correctly access the last character before
the null terminator
[kaushlendra.kumar@intel.com: remove unnecessary blank line]
Link: https://lkml.kernel.org/r/20250901044955.3902815-1-kaushlendra.kumar@intel.com
Link: https://lkml.kernel.org/r/20250830172022.1927448-1-kaushlendra.kumar@intel.com
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Acked-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Refactor macros and non-composite global variable definitions into a
struct that is defined at the start of a test and is passed around instead
of relying on global vars.
Link: https://lkml.kernel.org/r/20250829155600.2000-1-ujwal.kundur@gmail.com
Signed-off-by: Ujwal Kundur <ujwal.kundur@gmail.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
With zswap using zsmalloc directly, there are no more in-tree users of
this code. Remove it.
With zpool gone, zsmalloc is now always a simple dependency and no
longer something the user needs to configure. Hide CONFIG_ZSMALLOC
from the user and have zswap and zram pull it in as needed.
Link: https://lkml.kernel.org/r/20250829162212.208258-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: SeongJae Park <sj@kernel.org>
Acked-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.se>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Some ublk selftests have strange behavior when fio is not installed.
While most tests behave correctly (run if they don't need fio, or skip
if they need fio), the following tests have different behavior:
- test_null_01, test_null_02, test_generic_01, test_generic_02, and
test_generic_12 try to run fio without checking if it exists first,
and fail on any failure of the fio command (including "fio command
not found"). So these tests fail when they should skip.
- test_stress_05 runs fio without checking if it exists first, but
doesn't fail on fio command failure. This test passes, but that pass
is misleading as the test doesn't do anything useful without fio
installed. So this test passes when it should skip.
Fix these issues by adding _have_program fio checks to the top of all of
these tests.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a spelling mistake in a test message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Every futex selftest uses the kselftest_harness.h helper and don't need
the logging.h file. Delete it.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
futex_numa doesn't really use logging.h helpers, it's only need two
includes from this file. So drop it and include the two missing
includes.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_numa_mpol test to use
kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_priv_hash test to use
kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_waitv test to use
kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_requeue test to use
kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_wait test to use
kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_wait_private_mapped_file
test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_wait_unitialized_heap
test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_wait_wouldblock test to
use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_wait_timeout test to use
kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_requeue_pi_signal_restart
test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_requeue_pi_mismatched_ops
test to use kselftest_harness header instead of futex's logging header.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To reduce the boilerplate code, refactor futex_requeue_pi test to use
kselftest_harness header instead of futex's logging header.
Use kselftest fixture feature to make it easy to repeat the same test
with different parameters. With that, drop all repetitive test calls
from run.sh.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Create ksft_print_dbg_msg() so testers can enable extra debug messages
when running a test with the flag -d.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* kvm-arm64/el2-feature-control: (23 commits)
: .
: General rework of EL2 features that can be disabled to satisfy
: the requirement of migration between heterogeneous hosts:
:
: - Handle effective RES0 behaviour of undefined registers, making sure
: that disabling a feature affects full registeres, and not just
: individual control bits. (20250918151402.1665315-1-maz@kernel.org)
:
: - Allow ID_AA64MMFR1_EL1.{TWED,HCX} to be disabled from userspace.
: (20250911114621.3724469-1-yangjinqian1@huawei.com)
:
: - Turn the NV feature management into a deny-list, and expose
: missing features to EL2 guests.
: (20250912212258.407350-1-oliver.upton@linux.dev)
: .
KVM: arm64: nv: Expose up to FEAT_Debugv8p8 to NV-enabled VMs
KVM: arm64: nv: Advertise FEAT_TIDCP1 to NV-enabled VMs
KVM: arm64: nv: Advertise FEAT_SpecSEI to NV-enabled VMs
KVM: arm64: nv: Expose FEAT_TWED to NV-enabled VMs
KVM: arm64: nv: Exclude guest's TWED configuration when TWE isn't set
KVM: arm64: nv: Expose FEAT_AFP to NV-enabled VMs
KVM: arm64: nv: Expose FEAT_ECBHB to NV-enabled VMs
KVM: arm64: nv: Expose FEAT_RASv1p1 via RAS_frac
KVM: arm64: nv: Expose FEAT_DF2 to NV-enabled VMs
KVM: arm64: nv: Don't erroneously claim FEAT_DoubleLock for NV VMs
KVM: arm64: nv: Convert masks to denylists in limit_nv_id_reg()
KVM: arm64: selftests: Test writes to ID_AA64MMFR1_EL1.{HCX, TWED}
KVM: arm64: Make ID_AA64MMFR1_EL1.{HCX, TWED} writable from userspace
KVM: arm64: Convert MDCR_EL2 RES0 handling to compute_reg_res0_bits()
KVM: arm64: Convert SCTLR_EL1 RES0 handling to compute_reg_res0_bits()
KVM: arm64: Enforce absence of FEAT_TCR2 on TCR2_EL2
KVM: arm64: Enforce absence of FEAT_SCTLR2 on SCTLR2_EL{1,2}
KVM: arm64: Convert HCR_EL2 RES0 handling to compute_reg_res0_bits()
KVM: arm64: Enforce absence of FEAT_HCX on HCRX_EL2
KVM: arm64: Enforce absence of FEAT_FGT2 on FGT2 registers
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add a basic test corrupting a level-2 table entry to check that
the resulting abort is a SEA on a PTW at level-3.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Commit d5094bcb5b ("tools/nolibc: define time_t in terms of
__kernel_old_time_t") made nolibc use the kernel's time type so that
`time_t` matches `timespec::tv_sec` on all ABIs (notably x32).
But since __kernel_old_time_t is fairly new, notably from 2020 in commit
94c467ddb2 ("y2038: add __kernel_old_timespec and __kernel_old_time_t"),
nolibc builds that rely on host headers may fail.
Switch to __kernel_time_t, which is the same as __kernel_old_time_t and
has existed for longer.
Tested in PPC VM of Open Source Lab of Oregon State University
(./tools/testing/selftests/rcutorture/bin/mkinitrd.sh)
Fixes: d5094bcb5b ("tools/nolibc: define time_t in terms of __kernel_old_time_t")
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
[Thomas: Reformat commit and its message a bit]
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
A relatively quiet release for ASoC, we've had a lot of maintainance
work going on and several new drivers but really the most remarkable
thing is that we removed a driver, the WL1273 driver used in some old
Nokia systems that have had the underlying system support removed from
the kernel.
- Morimoto-san continues his work on cleanups of the core APIs and
enforcement of abstraction layers.
- Lots of cleanups and conversions of DT bindings.
- Substantial maintainance work on the Intel AVS drivers.
- Support for Qualcomm Glymur and PM4125, Realtek RT1321, Shanghai
FourSemi FS2104/5S, Texas Instruments PCM1754.
- Remove support for TI WL1273.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmjNx/QACgkQJNaLcl1U
h9A+oQf/a/hKhCdmDVl8LE/a5dTExQqpzxvLpWxUBwiYykh5B08n/adS7oALRyBK
IfkbGfwpA4N2dGtwrluy4VATyQBTe8SUboX6iP1cxifbWG8+EDuVfpkdUl/R3fcK
gPm41C/2Xk+GoAF4StfijPKg2PV8mUOWmTrxNm2QswGpkXxOFO4PI2GbTwsABDeU
cv+EK7PUZHhKFUOu1ELLi1HmgI57TMK7Kb3I+ETcKNZ3ZiCaLs7Vkje5z2IUhSZZ
+Z/EDnLKUmvYRmbkA48aFas4hpafkT7jrmGrk95mju/W0Udd9Ggm4MSF6+9DN4MF
buaNixQZlIwVz68zapcVtrFedxKLEQ==
=6T3w
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.18
A relatively quiet release for ASoC, we've had a lot of maintainance
work going on and several new drivers but really the most remarkable
thing is that we removed a driver, the WL1273 driver used in some old
Nokia systems that have had the underlying system support removed from
the kernel.
- Morimoto-san continues his work on cleanups of the core APIs and
enforcement of abstraction layers.
- Lots of cleanups and conversions of DT bindings.
- Substantial maintainance work on the Intel AVS drivers.
- Support for Qualcomm Glymur and PM4125, Realtek RT1321, Shanghai
FourSemi FS2104/5S, Texas Instruments PCM1754.
- Remove support for TI WL1273.
This fixes the build with -Werror -Wall.
btf_dumper.c:71:31: error: variable 'finfo' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
71 | info.func_info = ptr_to_u64(&finfo);
| ^~~~~
prog.c:2294:31: error: variable 'func_info' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
2294 | info.func_info = ptr_to_u64(&func_info);
|
v2:
- Initialize instead of using memset.
Signed-off-by: Tom Stellard <tstellar@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20250917183847.318163-1-tstellar@redhat.com
The return value ret pointer is pointing opts_copy, but opts_copy
gets freed in get_delegate_value before return, fix this by free
the mntent->mnt_opts strdup memory after show delegate value.
Fixes: 2d812311c2 ("bpftool: Add bpf_token show")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20250919034816.1287280-2-chen.dylane@linux.dev
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmjHMcoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG5bwH/23w8iGB4hf7L/7Z
e7blX42Pe9EXA1uK62iWmwEjDvBuJ7TmVfXH09qYJ56fj6/rJEdpQwtBMd4ypL81
QA/7lq5UEl0apPzMN86J8EHCzmjNzv7o+UtEd4C/hPFEZHZJa5Hqj9CBglSwSCEn
fTkLk7Gl6s8SfzBQ/rXX6/ZChAB/RleVWabDlIQMDz++/+9DZ0aqphj+5bYSqysL
ROQOaj4LOICuLfrup9J61hKNBoF7Dv3sO20vc+Iic0XHRPZ6/lKCnHgCUsqVIOOQ
L4kDT7XKQg+n3ttjrMe84/8iHZdWtf8VMWrtniPT8e1YGYuMpavVplgIcFoFCoNm
Qa7NPDs=
=rZeT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaM3AYQAKCRAdayaRccAa
lkrsAQCfR0LymE8Hq+Vfk65DK4qZxigaXGTfg5n3xlPhTAh/iQEA02N0/ReHOOdH
nQde8709saIFE5axIMFvdWzbFPDtWwE=
=eIkf
-----END PGP SIGNATURE-----
Merge 6.17-rc6 into kbuild-next
Commit bd7c231212 ("pinctrl: meson: Fix typo in device table macro")
is needed in kbuild-next to avoid a build error with a future change.
While at it, address the conflict between commit 41f9049cff ("riscv:
Only allow LTO with CMODEL_MEDANY") and commit 6578a1ff6a ("riscv:
Remove version check for LTO_CLANG selects"), as reported by Stephen
Rothwell [1].
Link: https://lore.kernel.org/20250908134913.68778b7b@canb.auug.org.au/ [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
The string result of build_id__snprintf() is unconditionally used in
places like dsos__fprintf_buildid_cb(). If the build id has size 0 then
this creates a use of uninitialized memory. Add null termination for the
size 0 case.
A similar fix was written by Jiri Olsa in commit 6311951d4f ("perf
tools: Initialize output buffer in build_id__sprintf") but lost in the
transition to snprintf.
Fixes: fccaaf6fbb ("perf build-id: Change sprintf functions to snprintf")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The fallback message is unconditionally printed in places like
record__open().
If no fallback is attempted this can lead to printing uninitialized
data, crashes, etc.
Fixes: c0a54341c0 ("perf evsel: Introduce event fallback method")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The detection of uncore_imc may happen for free running PMUs and the
clockticks event may be present on uncore_clock. Rewrite the test to
detect duplicated/deduplicated events from perf list, not hardcoded to
uncore_imc.
If perf stat fails then assume it is permissions and skip the test.
Committer testing:
Before:
root@x1:~# perf test -vv uniquifyi
96: perf stat events uniquifying:
--- start ---
test child forked, pid 220851
stat event uniquifying test
grep: Unmatched [, [^, [:, [., or [=
Event is not uniquified [Failed]
perf stat -e clockticks -A -o /tmp/__perf_test.stat_output.X7ChD -- true
# started on Fri Sep 19 16:48:38 2025
Performance counter stats for 'system wide':
CPU0 2,310,956 uncore_clock/clockticks/
0.001746771 seconds time elapsed
---- end(-1) ----
96: perf stat events uniquifying : FAILED!
root@x1:~#
After:
root@x1:~# perf test -vv uniquifyi
96: perf stat events uniquifying:
--- start ---
test child forked, pid 222366
Uniquification of PMU sysfs events test
Testing event uncore_imc_free_running/data_read/ is uniquified to uncore_imc_free_running_0/data_read/
Testing event uncore_imc_free_running/data_total/ is uniquified to uncore_imc_free_running_0/data_total/
Testing event uncore_imc_free_running/data_write/ is uniquified to uncore_imc_free_running_0/data_write/
Testing event uncore_imc_free_running/data_read/ is uniquified to uncore_imc_free_running_1/data_read/
Testing event uncore_imc_free_running/data_total/ is uniquified to uncore_imc_free_running_1/data_total/
Testing event uncore_imc_free_running/data_write/ is uniquified to uncore_imc_free_running_1/data_write/
---- end(0) ----
96: perf stat events uniquifying : Ok
root@x1:~#
Fixes: 070b315333 ("perf test: Restrict uniquifying test to machines with 'uncore_imc'")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The PMU name is appearing twice in:
```
$ perf stat -e uncore_imc_free_running/data_total/ -A true
Performance counter stats for 'system wide':
CPU0 1.57 MiB uncore_imc_free_running_0/uncore_imc_free_running,data_total/
CPU0 1.58 MiB uncore_imc_free_running_1/uncore_imc_free_running,data_total/
0.000892376 seconds time elapsed
```
Use the pmu_name_len_no_suffix to avoid this problem.
Committer testing:
After this patch:
root@x1:~# perf stat -e uncore_imc_free_running/data_total/ -A true
Performance counter stats for 'system wide':
CPU0 1.69 MiB uncore_imc_free_running_0/data_total/
CPU0 1.68 MiB uncore_imc_free_running_1/data_total/
0.002141605 seconds time elapsed
root@x1:~#
Fixes: 7d45f402d3 ("perf evlist: Make uniquifying counter names consistent")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test starts a workload and then opens events. If the events fail
to open, for example because of perf_event_paranoid, the gopipe of the
workload is leaked and the file descriptor leak check fails when the
test exits. To avoid this cancel the workload when opening the events
fails.
Before:
```
$ perf test -vv 7
7: PERF_RECORD_* events & perf_sample fields:
--- start ---
test child forked, pid 1189568
Using CPUID GenuineIntel-6-B7-1
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/)
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8
sys_perf_event_open failed, error -13
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xa00000000 (cpu_atom/PERF_COUNT_HW_CPU_CYCLES/)
disabled 1
exclude_kernel 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 3
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/)
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8
sys_perf_event_open failed, error -13
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0x400000000 (cpu_core/PERF_COUNT_HW_CPU_CYCLES/)
disabled 1
exclude_kernel 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8 = 3
Attempt to add: software/cpu-clock/
..after resolving event: software/config=0/
cpu-clock -> software/cpu-clock/
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0x9 (PERF_COUNT_SW_DUMMY)
sample_type IP|TID|TIME|CPU
read_format ID|LOST
disabled 1
inherit 1
mmap 1
comm 1
enable_on_exec 1
task 1
sample_id_all 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
{ wakeup_events, wakeup_watermark } 1
------------------------------------------------------------
sys_perf_event_open: pid 1189569 cpu 0 group_fd -1 flags 0x8
sys_perf_event_open failed, error -13
perf_evlist__open: Permission denied
---- end(-2) ----
Leak of file descriptor 6 that opened: 'pipe:[14200347]'
---- unexpected signal (6) ----
iFailed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
Failed to read build ID for //anon
#0 0x565358f6666e in child_test_sig_handler builtin-test.c:311
#1 0x7f29ce849df0 in __restore_rt libc_sigaction.c:0
#2 0x7f29ce89e95c in __pthread_kill_implementation pthread_kill.c:44
#3 0x7f29ce849cc2 in raise raise.c:27
#4 0x7f29ce8324ac in abort abort.c:81
#5 0x565358f662d4 in check_leaks builtin-test.c:226
#6 0x565358f6682e in run_test_child builtin-test.c:344
#7 0x565358ef7121 in start_command run-command.c:128
#8 0x565358f67273 in start_test builtin-test.c:545
#9 0x565358f6771d in __cmd_test builtin-test.c:647
#10 0x565358f682bd in cmd_test builtin-test.c:849
#11 0x565358ee5ded in run_builtin perf.c:349
#12 0x565358ee6085 in handle_internal_command perf.c:401
#13 0x565358ee61de in run_argv perf.c:448
#14 0x565358ee6527 in main perf.c:555
#15 0x7f29ce833ca8 in __libc_start_call_main libc_start_call_main.h:74
#16 0x7f29ce833d65 in __libc_start_main@@GLIBC_2.34 libc-start.c:128
#17 0x565358e391c1 in _start perf[851c1]
7: PERF_RECORD_* events & perf_sample fields : FAILED!
```
After:
```
$ perf test 7
7: PERF_RECORD_* events & perf_sample fields : Skip (permissions)
```
Fixes: 16d00fee70 ("perf tests: Move test__PERF_RECORD into separate object")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If libperl is installed then the perf tool build will build against
it. There appears to be limited interest in the scripting support for
perl so let's make it opt-in and deprecate it.
With this patch applied you need to add LIBPERL=1 to get libperl
support in perf - there is no warning if libperl is missing, but
building will fail if libperl is missing and the build has LIBPERL=1.
The perf version output is changed to:
```
$ perf version --build-options
perf version 6.17.rc3.g8eca69269947
aio: [ on ] # HAVE_AIO_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
bpf_skeletons: [ on ] # HAVE_BPF_SKEL
debuginfod: [ on ] # HAVE_DEBUGINFOD_SUPPORT
dwarf: [ on ] # HAVE_LIBDW_SUPPORT
dwarf_getlocations: [ on ] # HAVE_LIBDW_SUPPORT
dwarf-unwind: [ on ] # HAVE_DWARF_UNWIND_SUPPORT
auxtrace: [ on ] # HAVE_AUXTRACE_SUPPORT
libbfd: [ OFF ] # HAVE_LIBBFD_SUPPORT ( tip: Deprecated, license incompatibility, use BUILD_NONDISTRO=1 and install binutils-dev[el] )
libbpf-strings: [ on ] # HAVE_LIBBPF_STRINGS_SUPPORT
libcapstone: [ on ] # HAVE_LIBCAPSTONE_SUPPORT
libdw-dwarf-unwind: [ on ] # HAVE_LIBDW_SUPPORT
libelf: [ on ] # HAVE_LIBELF_SUPPORT
libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT
libopencsd: [ OFF ] # HAVE_CSTRACE_SUPPORT
libperl: [ OFF ] # HAVE_LIBPERL_SUPPORT ( tip:
Deprecated, use LIBPERL=1 and install libperl-dev to build with it )
libpfm4: [ on ] # HAVE_LIBPFM
libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT
libslang: [ on ] # HAVE_SLANG_SUPPORT
libtraceevent: [ on ] # HAVE_LIBTRACEEVENT
libunwind: [ OFF ] # HAVE_LIBUNWIND_SUPPORT ( tip:
Deprecated, use LIBUNWIND=1 and install libunwind-dev[el] to build
with it )
lzma: [ on ] # HAVE_LZMA_SUPPORT
numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT
zlib: [ on ] # HAVE_ZLIB_SUPPORT
zstd: [ on ] # HAVE_ZSTD_SUPPORT
```
i.e. there is a tip saying about deprecation and how to get support
back.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <qmo@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Yuzhuo Jing <yuzhuo@google.com>
Link: https://lore.kernel.org/lkml/aMrk03gigBlGcYLK@x1/
Link: https://lore.kernel.org/lkml/CAP-5=fVX+bLBRJCiziDi_hBySgv2NFtDoghtpheSSxVAvvETGw@mail.gmail.com
[ Keep the pre-existing perl-ExtUtils-Embed hint for Fedora/RHEL systems ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----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=aJ23
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix some build warnings for RUST-enabled objtool check, align ACPI
structures for ARCH_STRICT_ALIGN, fix an unreliable stack for live
patching, add some NULL pointer checkings, and fix some bugs around
KVM"
* tag 'loongarch-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_pch_pic_regs_access()
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_eiointc_sw_status_access()
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_eiointc_regs_access()
LoongArch: KVM: Avoid copy_*_user() with lock hold in kvm_eiointc_ctrl_access()
LoongArch: KVM: Fix VM migration failure with PTW enabled
LoongArch: KVM: Remove unused returns and semicolons
LoongArch: vDSO: Check kcalloc() result in init_vdso()
LoongArch: Fix unreliable stack for live patching
LoongArch: Replace sprintf() with sysfs_emit()
LoongArch: Check the return value when creating kobj
LoongArch: Align ACPI structures if ARCH_STRICT_ALIGN enabled
LoongArch: Update help info of ARCH_STRICT_ALIGN
LoongArch: Handle jump tables options for RUST
LoongArch: Make LTO case independent in Makefile
objtool/LoongArch: Mark special atomic instruction as INSN_BUG type
objtool/LoongArch: Mark types based on break immediate code
Add a test that verifies that the currently running kernel does not
report support for any features that are unrecognized by kublk. This
should catch cases where features are added without updating kublk's
feat_map accordingly, which has happened multiple times in the past (see
[1], [2]).
Note that this new test may fail if the test suite is older than the
kernel, and the newer kernel contains a newly introduced feature. I
believe this is not a use case we currently care about - we only care
about newer test suites passing on older kernels.
[1] https://lore.kernel.org/linux-block/20250606214011.2576398-1-csander@purestorage.com/t/#u
[2] https://lore.kernel.org/linux-block/2a370ab1-d85b-409d-b762-f9f3f6bdf705@nvidia.com/t/#m1c520a058448d594fd877f07804e69b28908533f
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When UBLK_F_BUF_REG_OFF_DAEMON was added, we missed updating kublk's
feat_map, which results in the feature being reported as "unknown." Add
UBLK_F_BUF_REG_OFF_DAEMON to feat_map to fix this.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Simplify the definition of feat_map by introducing a helper macro
FEAT_NAME to avoid having to type the feature name twice. As a side
effect, this changes the names in the feature list to be the full macro
name instead of the abbreviated names that were used before, but this is
a good change for clarity.
Using the full feature macro names ruins the alignment of the output, so
change the output format to put each feature's hex value before its
name, as this is easier to align nicely. The output now looks as
follows:
root# ./kublk features
ublk_drv features: 0x7fff
0x1 : UBLK_F_SUPPORT_ZERO_COPY
0x2 : UBLK_F_URING_CMD_COMP_IN_TASK
0x4 : UBLK_F_NEED_GET_DATA
0x8 : UBLK_F_USER_RECOVERY
0x10 : UBLK_F_USER_RECOVERY_REISSUE
0x20 : UBLK_F_UNPRIVILEGED_DEV
0x40 : UBLK_F_CMD_IOCTL_ENCODE
0x80 : UBLK_F_USER_COPY
0x100 : UBLK_F_ZONED
0x200 : UBLK_F_USER_RECOVERY_FAIL_IO
0x400 : UBLK_F_UPDATE_SIZE
0x800 : UBLK_F_AUTO_BUF_REG
0x1000 : UBLK_F_QUIESCE
0x2000 : UBLK_F_PER_IO_DAEMON
0x4000 : unknown
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- simple propagation of read/write marks;
- joining read/write marks from conditional branches;
- avoid must_write marks in when same instruction accesses different
stack offsets on different execution paths;
- avoid must_write marks in case same instruction accesses stack
and non-stack pointers on different execution paths;
- read/write marks propagation to outer stack frame;
- independent read marks for different callchains ending with the same
function;
- bpf_calls_callback() dependent logic in
liveness.c:bpf_stack_slot_alive().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-12-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds tags __not_msg(<msg>) and __not_msg_unpriv(<msg>).
Test fails if <msg> is found in verifier log.
If __msg_not() is situated between __msg() tags framework matches
__msg() tags first, and then checks that <msg> is not present in a
portion of a log between bracketing __msg() tags.
__msg_not() tags bracketed by a same __msg() group are effectively
unordered.
The idea is borrowed from LLVM's CheckFile with its CHECK-NOT syntax.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-11-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove register chain based liveness tracking:
- struct bpf_reg_state->{parent,live} fields are no longer needed;
- REG_LIVE_WRITTEN marks are superseded by bpf_mark_stack_write()
calls;
- mark_reg_read() calls are superseded by bpf_mark_stack_read();
- log.c:print_liveness() is superseded by logging in liveness.c;
- propagate_liveness() is superseded by bpf_update_live_stack();
- no need to establish register chains in is_state_visited() anymore;
- fix a bunch of tests expecting "_w" suffixes in verifier log
messages.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250918-callchain-sensitive-liveness-v3-9-c3cd27bacc60@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If a user specifies an AUX buffer larger than 2 GiB, the returned size
may exceed 0x80000000. Since the err variable is defined as a signed
32-bit integer, such a value overflows and becomes negative.
As a result, the perf record command reports an error:
0x146e8 [0x30]: failed to process type: 71 [Unknown error 183711232]
Change the type of the err variable to a signed 64-bit integer to
accommodate large buffer sizes correctly.
Fixes: d5652d865e ("perf session: Add ability to skip 4GiB or more")
Reported-by: Tamas Zsoldos <tamas.zsoldos@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250808-perf_fix_big_buffer_size-v1-1-45f45444a9a4@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Split mem benchmark options into common and memset/memcpy specific.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There can be a significant gap in memset/memcpy performance depending
on the size of the region being operated on.
With chunk-size=4kb:
$ echo madvise > /sys/kernel/mm/transparent_hugepage/enabled
$ perf bench mem memset -p 4kb -k 4kb -s 4gb -l 10 -f x86-64-stosq
# Running 'mem/memset' benchmark:
# function 'x86-64-stosq' (movsq-based memset() in arch/x86/lib/memset_64.S)
# Copying 4gb bytes ...
13.011655 GB/sec
With chunk-size=1gb:
$ echo madvise > /sys/kernel/mm/transparent_hugepage/enabled
$ perf bench mem memset -p 4kb -k 1gb -s 4gb -l 10 -f x86-64-stosq
# Running 'mem/memset' benchmark:
# function 'x86-64-stosq' (movsq-based memset() in arch/x86/lib/memset_64.S)
# Copying 4gb bytes ...
21.936355 GB/sec
So, allow the user to specify the chunk-size.
The default value is identical to the total size of the region, which
preserves current behaviour.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Page sizes that can be selected: 4KB, 2MB, 1GB.
Both the reservation and node from which hugepages are allocated
from are expected to be addressed by the user.
An example of page-size selection:
$ perf bench mem memset -s 4gb -p 2mb
# Running 'mem/memset' benchmark:
# function 'default' (Default memset() provided by glibc)
# Copying 4gb bytes ...
14.919194 GB/sec
# function 'x86-64-unrolled' (unrolled memset() in arch/x86/lib/memset_64.S)
# Copying 4gb bytes ...
11.514503 GB/sec
# function 'x86-64-stosq' (movsq-based memset() in arch/x86/lib/memset_64.S)
# Copying 4gb bytes ...
12.600568 GB/sec
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using mmap() ensures that the buffer is always aligned at a fixed
boundary. Switch to that to remove one source of variability.
Since we always want to read/write from the allocated buffers map
with pagetables pre-populated.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No functional change.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move benchmark function parameters in struct bench_params.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250917152418.4077386-4-ankur.a.arora@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do type conversion to double at the point of use.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250917152418.4077386-3-ankur.a.arora@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have two copies of each mem benchmark: one using cycles to
measure time, the second for gettimeofday().
Unify.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The alloc_syscall_stats() function always returns an error pointer
(ERR_PTR) on failure.
So replace NULL check with IS_ERR() check after calling
alloc_syscall_stats() function.
Fixes: fc00897c8a ("perf trace: Add --summary-mode option")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Setup 'struct perf_event_attr' test was failing on EMR cpu because 'perf
stat' was providing an event that was not included in the test. Type 4
Config 4269 or 10ad, int_misc.uop_dropping.
Add event type=4 config=4269 to test-stat-default and
test-stat-detailed-* files with optional=1 so EMR (Emerald Rapids)
machines can pass the test.
Fixes: d9a6bb9e35 ("perf vendor events: Update emeraldrapids events/metrics")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Trevor Allison <tallison@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When not running as root and with higher perf event paranoia values
the perf record LBR tests could fail rather than skipping the
problematic tests.
Add the sensitivity to the test and confirm it passes with paranoia
values from -1 to 2.
Committer testing:
Testing with '$ perf test -vv lbr', i.e. as non root, and then comparing
the output shows the mentioned errors before this patch:
acme@x1:~$ grep -m1 "model name" /proc/cpuinfo
model name : 13th Gen Intel(R) Core(TM) i7-1365U
acme@x1:~$
Before:
132: perf record LBR tests : Skip
After:
132: perf record LBR tests : Ok
Fixes: 32559b99e0 ("perf test: Add set of perf record LBR tests")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update the perf.data file format description on header section
HEADER_BPF_PROG_INFO.
The information is taken from process_bpf_prog_info() and
write_bpf_prog_info() from file util/header.c.
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf record testcase fails on systems with more than 1K CPUs.
Testcase: perf test -vv "PERF_RECORD_* events & perf_sample fields"
PERF_RECORD_* events & perf_sample fields :
--- start ---
test child forked, pid 272482
sched_getaffinity: Invalid argument
sched__get_first_possible_cpu: Invalid argument
test child finished with -1
---- end ----
PERF_RECORD_* events & perf_sample fields: FAILED!
sched__get_first_possible_cpu uses "sched_getaffinity" to get the
cpumask and this call is returning EINVAL (Invalid argument).
This happens because the default mask size in glibc is 1024.
To overcome this 1024 CPUs mask size limitation of cpu_set_t, change the
mask size using the CPU_*_S macros ie, use CPU_ALLOC to allocate
cpumask, CPU_ALLOC_SIZE for size.
Same fix needed for mask which is used to setaffinity so that mask size
is large enough to represent number of possible CPU's in the system.
Reported-by: Tejas Manhas <tejas05@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: Tejas Manhas <tejas05@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Aditya Bodkhe <Aditya.Bodkhe1@ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently __die_find_scope_cb() goes to check siblings when the DIE
doesn't include the given PC.
However namespaces don't have a PC and could contain children that have
that PC.
When we encounter a namespace, we should check both its children and
siblings.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Zecheng Li <zecheng@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xu Liu <xliuprof@google.com>
Link: https://lore.kernel.org/r/20250825195817.226560-1-zecheng@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Utilizes the previous is_breg_access_indirect function to determine if
the register + offset stores the variable itself or the struct it points
to, save the information in die_var_type.is_reg_var_addr.
Since we are storing the real types in the stack state, we need to do a
type dereference when is_reg_var_addr is set to false for stack/frame
registers.
For other gp registers, skip the variable when the register is a pointer
to the type. If we want to accept these variables, we might also utilize
is_reg_var_addr in a different way, we need to mark that register as a
pointer to the type.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Zecheng Li <zecheng@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xu Liu <xliuprof@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduces the function is_breg_access_indirect to determine whether a
memory access involving a DW_OP_breg* operation refers to the variable's
value directly or requires dereferencing the variable's type as a
pointer based on the DWARF expression.
Previously, all breg based accesses were assumed to directly access the
variable's value (is_pointer = false).
The is_breg_access_indirect function handles three cases:
1. Base register + offset only: (e.g., DW_OP_breg7 RSP+88) The
calculated address is the location of the variable. The access is
direct, so no type dereference is needed. Returns false.
2. Base register + offset, followed by other operations ending in
DW_OP_stack_value, including DW_OP_deref: (e.g., DW_OP_breg*,
DW_OP_deref, DW_OP_stack_value) The DWARF expression computes the
variable's value, but that value requires a dereference. The memory
access is fetching that value, so no type dereference is needed.
Returns false.
3. Base register + offset, followed only by DW_OP_stack_value: (e.g.,
DW_OP_breg13 R13+256, DW_OP_stack_value) This indicates the value at
the base + offset is the variable's value. Since this value is being
used as an address in the memory access, the variable's type is
treated as a pointer and requires a type dereference. Returns true.
The is_pointer argument passed to match_var_offset is now set by
is_breg_access_indirect for breg accesses.
There are more complex expressions that includes multiple operations and
may require additional handling, such as DW_OP_deref without a
DW_OP_stack_value, or including multiple base registers. They are less
common in the Linux kernel dwarf and are skipped in check_allowed_ops.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Zecheng Li <zecheng@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xu Liu <xliuprof@google.com>
Link: https://lore.kernel.org/r/CAJUgMyK2wTiEZB__dtgCELmaNGFWhG1j0g9rv_C=cLD6Zq4_5w@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If not root and the perf_event_paranoid is set >1 swfilt will fail to
open the event failing the test. Add check to skip the test in that
case.
Fixes: 0e71bcdcf1 ("perf test: Add AMD IBS sw filter test")
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250913000350.1306948-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since commit eead8a0114 ("libperf threadmap: Don't segv for index 0 for the
NULL 'struct perf_thread_map' pointer"), perf_thread_map__pid() can
check for a NULL map and return -1 if idx is 0. Cleanup
auxtrace_mmap_params__set_idx() and remove the redundant NULL check.
No functional change intended.
Reviewed-by: Aditya Bodkhe <adityab1@linux.ibm.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While fixing a typo in "l1d_cache_access_prefetches" in AmpereOneX,
a few other typos were found in metrics' descriptions too. While AmpereOne
doesn't have the metric, it did have the typos in the descriptions.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250910195214.50814-3-ilkka@os.amperecomputing.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add missing 'h' to l1d_cache_access_prefetces
Also fix a couple of typos and use consistent term in brief descriptions
Fixes: 16438b652b ("perf vendor events arm64 AmpereOneX: Add core PMU events and metrics")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current code skips to parse events after generating data source. The
reason is the data source packets have cache and snooping related info,
the afterwards event packets might contain duplicate info.
This commit changes to continue parsing the events after data source
analysis. If data source does not give out memory level and snooping
types, then the event info is used to synthesize the related fields.
As a result, both the peer snoop option ('-d peer') and hitm options
('-d tot/lcl/rmt') are supported by Arm SPE in 'perf c2c'.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since FEAT_SPEv1p4, Arm SPE provides two extra events: "Cache data
modified" and "Data snooped".
Set the snoop mode as:
- If both the "Cache data modified" event and the "Data snooped" event
are set, which indicates a load operation that snooped from a outside
cache and hit a modified copy, set the HITM flag to inspect false
sharing.
- If the snooped event bit is not set, and the snooped event has been
supported by the hardware, set as NONE mode (no snoop operation).
- If the snooped event bit is not set, and the event is not supported or
absent the events info in the meta data, set as NA mode (not
available).
Don't set any mode for only "Cache data modified" event, as it hits a
local modified copy.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Handle "CPU=-1" (per-thread mode) in the arm_spe__get_metadata_by_cpu()
function. As a result, the function is more general and will be invoked
by a sequential change.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Starting with FEAT_SPEv1p4, Arm SPE provides information on Level 2 data
cache and recently fetched events. This patch fills in the memory levels
for these new events.
The recently fetched events are matched to line-fill buffer (LFB). In
general, the latency for accessing LFB is higher than accessing L1 cache
but lower than accessing L2 cache. Thus, it locates in the memory
hierarchy information between L1 cache and L2 cache.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For a load hit, the lowest-level cache reflects the latency of fetching
a data. Otherwise, the highest-level cache involved in refilling
indicates the overhead caused by a load.
Store operations remain unchanged to keep the descending order when
iterating through cache levels.
Split into two functions: one is for setting memory levels for loads and
another for stores.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This commit introduces macros for detecting cache level and cache miss.
Populates the 'mem_lvl_num' field which is a later added attribute for
representing memory level. Set NA ("not available") to memory levels if
memory hierarchy info is absent.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new "event_filter" entry in the meta data and dump it in raw data
mode.
After:
# perf script -D
...
0 0 0x470 [0x1f0]: PERF_RECORD_AUXTRACE_INFO type: 4
Header version :2
Header size :4
PMU type v2 :11
CPU number :8
Magic :0x1010101010101010
CPU # :0
Num of params :4
MIDR :0x410fd0f0
PMU Type :11
Min Interval :256
Event Filter :0x3fe08fe
...
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Decode new event types introduced by FEAT_SPEv1p4, FEAT_SPE_SME and
FEAT_SPE_SME.
The printed event names don't strictly follow the naming in the Arm ARM.
For example, the "Cache data modified" event is shown as "HITM", and the
"Data snooped" event is printed as "SNOOPED". Shorter names are easier
to read while preserving core meanings.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Two sets of event bits are defined: one for generating samples and
another are raw event bits used in the backend decoder. Reduce the
redundancy by using the raw event bits directly in the frontend code.
To avoid overflow issues, change the type of the event variable from
enum to u64.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
data_src has an actual type rather than just being a u64. To help
readers, delay decomposing it to a u64 until it's finally assigned to
the sample.
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For remote accesses, the data source packet does not contain information
about the memory level. To avoid misinformation, set the memory level to
NA (Not Available).
Fixes: 4e6430cbb1 ("perf arm-spe: Use SPE data source for neoverse cores")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set the mem_remote field for a remote access to appropriately represent
the event.
Fixes: a89dbc9b98 ("perf arm-spe: Set sample's data source field")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are more failure conditions now so 400 iterations is not enough pass
them all, up it to 1000. The limit exists so it doesn't infinite loop.
Link: https://patch.msgid.link/r/3-v1-02cd136829df+31-iommufd_syz_fput_jgg@nvidia.com
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Assert that the EL2 features {HCX, TWED} of ID_AA64MMFR1_EL1 are writable
from userspace. They are only allowed to be downgraded in userspace.
Signed-off-by: Jinqian Yang <yangjinqian1@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add a bunch of selftests for namespace file handles.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This feature has no traps associated with it so the SIGILL is not reliable.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Currently only array maps are supported, but the implementation can be
extended for other maps and objects. The hash is memoized only for
exclusive and frozen maps as their content is stable until the exclusive
program modifies the map.
This is required for BPF signing, enabling a trusted loader program to
verify a map's integrity. The loader retrieves
the map's runtime hash from the kernel and compares it against an
expected hash computed at build time.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/r/20250914215141.15144-7-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement setters and getters that allow map to be registered as
exclusive to the specified program. The registration should be done
before the exclusive program is loaded.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250914215141.15144-5-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use AF_ALG sockets to not have libbpf depend on OpenSSL. The helper is
used for the loader generation code to embed the metadata hash in the
loader program and also by the bpf_map__make_exclusive API to calculate
the hash of the program the map is exclusive to.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/r/20250914215141.15144-4-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Exclusive maps allow maps to only be accessed by program with a
program with a matching hash which is specified in the excl_prog_hash
attr.
For the signing use-case, this allows the trusted loader program
to load the map and verify the integrity
Signed-off-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/r/20250914215141.15144-3-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a README file for RISC-V specific kernel selftests under
tools/testing/selftests/riscv/. This mirrors the existing README
for arm64, providing clear guidance on how the tests are architecture
specific and skipped on non-riscv systems. It also includes
standard make commands for building, running and installing the
tests, along with a reference to general kselftest documentation.
Signed-off-by: Bala-Vignesh-Reddy <reddybalavignesh9979@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20250815180724.14459-1-reddybalavignesh9979@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Add a couple of test cases to ensure RCU protection is kicked in
automatically, and the return type is as expected.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250917032755.4068726-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, KF_RCU_PROTECTED only applies to iterator APIs and that too
in a convoluted fashion: the presence of this flag on the kfunc is used
to set MEM_RCU in iterator type, and the lack of RCU protection results
in an error only later, once next() or destroy() methods are invoked on
the iterator. While there is no bug, this is certainly a bit
unintuitive, and makes the enforcement of the flag iterator specific.
In the interest of making this flag useful for other upcoming kfuncs,
e.g. scx_bpf_cpu_curr() [0][1], add enforcement for invoking the kfunc
in an RCU critical section in general.
This would also mean that iterator APIs using KF_RCU_PROTECTED will
error out earlier, instead of throwing an error for lack of RCU CS
protection when next() or destroy() methods are invoked.
In addition to this, if the kfuncs tagged KF_RCU_PROTECTED return a
pointer value, ensure that this pointer value is only usable in an RCU
critical section. There might be edge cases where the return value is
special and doesn't need to imply MEM_RCU semantics, but in general, the
assumption should hold for the majority of kfuncs, and we can revisit
things if necessary later.
[0]: https://lore.kernel.org/all/20250903212311.369697-3-christian.loehle@arm.com
[1]: https://lore.kernel.org/all/20250909195709.92669-1-arighi@nvidia.com
Tested-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250917032755.4068726-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add changes to delay the allocation and setup of dports until when the
endpoint device is being probed. At this point, the CXL link is
established from endpoint to host bridge. Addresses issues seen on
some platforms when dports are probed earlier.
Link: https://lore.kernel.org/linux-cxl/20250829180928.842707-1-dave.jiang@intel.com/
Cross-merge networking fixes after downstream PR (net-6.17-rc7).
No conflicts.
Adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en/fs.h
9536fbe10c ("net/mlx5e: Add PSP steering in local NIC RX")
7601a0a462 ("net/mlx5e: Add a miss level for ipsec crypto offload")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the UAPI headers are always installed into the source directory.
When building out-of-tree this doesn't work, as the include path will be
wrong and it dirties the source tree, leading to complains by kbuild.
Make sure the 'headers' target installs the UAPI headers in the correctly.
The real target directory can come from multiple places. To handle them all
extract the target directory from KHDR_INCLUDES.
Link: https://lore.kernel.org/r/20250918-kselftest-uapi-out-of-tree-v1-1-f4434f28adcd@linutronix.de
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Closes: https://lore.kernel.org/lkml/20250917153209.GA2023406@nvidia.com/
Fixes: 1a59f5d315 ("selftests: Add headers target")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Current release - fix to a fix:
- eth: Revert "net/mlx5e: Update and set Xon/Xoff upon port speed set"
- wifi: iwlwifi: pcie: fix byte count table for 7000/8000 devices
- net: clear sk->sk_ino in sk_set_socket(sk, NULL), fix CRIU
Previous releases - regressions:
- eth: ice: fix Rx page leak on multi-buffer frames
- bonding: set random address only when slaves already exist
- rxrpc: fix untrusted unsigned subtract
- eth: mlx5: don't return mlx5_link_info table when speed is unknown
Previous releases - always broken:
- tls: make sure to abort the stream if headers are bogus
- tcp: fix null-deref when using TCP-AO with TCP_REPAIR
- dpll: fix skipping last entry in clock quality level reporting
- eth: qed: don't collect too many protection override GRC elements,
fix memory corruption
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=HZvL
-----END PGP SIGNATURE-----
Merge tag 'net-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless. No known regressions at this point.
Current release - fix to a fix:
- eth: Revert "net/mlx5e: Update and set Xon/Xoff upon port speed set"
- wifi: iwlwifi: pcie: fix byte count table for 7000/8000 devices
- net: clear sk->sk_ino in sk_set_socket(sk, NULL), fix CRIU
Previous releases - regressions:
- bonding: set random address only when slaves already exist
- rxrpc: fix untrusted unsigned subtract
- eth:
- ice: fix Rx page leak on multi-buffer frames
- mlx5: don't return mlx5_link_info table when speed is unknown
Previous releases - always broken:
- tls: make sure to abort the stream if headers are bogus
- tcp: fix null-deref when using TCP-AO with TCP_REPAIR
- dpll: fix skipping last entry in clock quality level reporting
- eth: qed: don't collect too many protection override GRC elements,
fix memory corruption"
* tag 'net-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
octeontx2-pf: Fix use-after-free bugs in otx2_sync_tstamp()
cnic: Fix use-after-free bugs in cnic_delete_task
devlink rate: Remove unnecessary 'static' from a couple places
MAINTAINERS: update sundance entry
net: liquidio: fix overflow in octeon_init_instr_queue()
net: clear sk->sk_ino in sk_set_socket(sk, NULL)
Revert "net/mlx5e: Update and set Xon/Xoff upon port speed set"
selftests: tls: test skb copy under mem pressure and OOB
tls: make sure to abort the stream if headers are bogus
selftest: packetdrill: Add tcp_fastopen_server_reset-after-disconnect.pkt.
tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect().
octeon_ep: fix VF MAC address lifecycle handling
selftests: bonding: add vlan over bond testing
bonding: don't set oif to bond dev when getting NS target destination
net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer
net/mlx5e: Add a miss level for ipsec crypto offload
net/mlx5e: Harden uplink netdev access against device unbind
MAINTAINERS: make the DPLL entry cover drivers
doc/netlink: Fix typos in operation attributes
igc: don't fail igc_probe() on LED setup error
...
cxl_test uses mock functions for decoder enumaration. Add initialization
of the cxld->target_map[] for cxl_test based decoders in the mock
functions.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
With devm_cxl_switch_port_decoders_setup() being called within cxl_core
instead of by the port driver probe, adjustments are needed to deal with
circular symbol dependency when this function is being mock'd. Add the
appropriate changes to get around the circular dependency.
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
devm_cxl_add_dport_by_dev() outside of cxl_test is done through PCI
hierarchy. However with cxl_test, it needs to be done through the
platform device hierarchy. Add the mock function for
devm_cxl_add_dport_by_dev().
When cxl_core calls a cxl_core exported function and that function is
mocked by cxl_test, the call chain causes a circular dependency issue. Dan
provided a workaround to avoid this issue. Apply the method to changes from
the late dport allocation changes in order to enable cxl-test.
In cxl_core they are defined with "__" added in front of the function. A
macro is used to define the original function names for when non-test
version of the kernel is built. A bit of macros and typedefs are used to
allow mocking of those functions in cxl_test.
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Group the decoder setup code in switch and endpoint port probe into a
single function for each to reduce the number of functions to be mocked
in cxl_test. Introduce devm_cxl_switch_port_decoders_setup() and
devm_cxl_endpoint_decoders_setup(). These two functions will be mocked
instead with some functions optimized out since the mock version does
not do anything. Remove devm_cxl_setup_hdm(),
devm_cxl_add_passthrough_decoder(), and devm_cxl_enumerate_decoders() in
cxl_test mock code. In turn, mock_cxl_add_passthrough_decoder() can be
removed since cxl_test does not setup passthrough decoders.
__wrap_cxl_hdm_decode_init() and __wrap_cxl_dvsec_rr_decode() can be
removed as well since they only return 0 when called.
[dj: drop 'struct cxl_port' forward declaration (Robert)]
Suggested-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add a test which verifies that NT_ARM_SVE and NT_ARM_SSVE reads and writes
are rejected as expected when the relevant architecture feature is not
supported.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
We do not currently have a test that asserts that we reject attempts to set
a vector length smaller than SVE_VL_MIN or larger than SVE_VL_MAX, add one
since that is our current behaviour.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
When compiling with LLVM and CONFIG_RUST is set, there exists the
following objtool warning:
rust/compiler_builtins.o: warning: objtool: __rust__unordsf2(): unexpected end of section .text.unlikely.
objdump shows that the end of section .text.unlikely is an atomic
instruction:
amswap.w $zero, $ra, $zero
According to the LoongArch Reference Manual, if the amswap.w atomic
memory access instruction has the same register number as rd and rj,
the execution will trigger an Instruction Non-defined Exception, so
mark the above instruction as INSN_BUG type to fix the warning.
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
If the break immediate code is 0, it should mark the type as
INSN_TRAP. If the break immediate code is 1, it should mark the
type as INSN_BUG.
While at it, format the code style and add the code comment for nop.
Cc: stable@vger.kernel.org
Suggested-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add a test which triggers mem pressure via OOB writes.
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250917002814.1743558-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a netlink family for PSP and allow drivers to register support.
The "PSP device" is its own object. This allows us to perform more
flexible reference counting / lifetime control than if PSP information
was part of net_device. In the future we should also be able
to "delegate" PSP access to software devices, such as *vlan, veth
or netkit more easily.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250917000954.859376-3-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The test reproduces the scenario explained in the previous patch.
Without the patch, the test triggers the warning and cannot see the last
retransmitted packet.
# ./ksft_runner.sh tcp_fastopen_server_reset-after-disconnect.pkt
TAP version 13
1..2
[ 29.229250] ------------[ cut here ]------------
[ 29.231414] WARNING: CPU: 26 PID: 0 at net/ipv4/tcp_timer.c:542 tcp_retransmit_timer+0x32/0x9f0
...
tcp_fastopen_server_reset-after-disconnect.pkt:26: error handling packet: Timed out waiting for packet
not ok 1 ipv4
tcp_fastopen_server_reset-after-disconnect.pkt:26: error handling packet: Timed out waiting for packet
not ok 2 ipv6
# Totals: pass:0 fail:2 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250915175800.118793-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a vlan over bond testing to make sure arp/ns target works.
Also change all the configs to mudules.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250916080127.430626-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ethtool FEC histogram series run into a build issue with
type: uint + multi-attr: True. Auto scalars use 64b types,
we need to convert them explicitly when rendering the types.
No current spec needs this, and the ethtool FEC histogram
doesn't need this either any more, so not posting as a fix.
Link: https://lore.kernel.org/8f52c5b8-bd8a-44b8-812c-4f30d50f63ff@redhat.com
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a test case minimized from a syzbot reproducer from [1].
The test case triggers verifier.c:maybe_exit_scc() w/o
preceding call to verifier.c:maybe_enter_scc() on a speculative
symbolic execution path.
Here is verifier log for the test case:
Live regs before insn:
0: .......... (b7) r0 = 100
1 1: 0......... (7b) *(u64 *)(r10 -512) = r0
1 2: 0......... (b5) if r0 <= 0x0 goto pc-2
3: 0......... (95) exit
0: R1=ctx() R10=fp0
0: (b7) r0 = 100 ; R0_w=100
1: (7b) *(u64 *)(r10 -512) = r0 ; R0_w=100 R10=fp0 fp-512_w=100
2: (b5) if r0 <= 0x0 goto pc-2
mark_precise: ...
2: R0_w=100
3: (95) exit
from 2 to 1 (speculative execution): R0_w=scalar() R1=ctx() R10=fp0 fp-512_w=100
1: R0_w=scalar() R1=ctx() R10=fp0 fp-512_w=100
1: (7b) *(u64 *)(r10 -512) = r0
processed 5 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
- Non-speculative execution path 0-3 does not allocate any checkpoints
(and hence does not call maybe_enter_scc()), and schedules a
speculative jump from 2 to 1.
- Speculative execution path stops immediately because of an infinite
loop detection and triggers verifier.c:update_branch_counts() ->
maybe_exit_scc() calls.
[1] https://lore.kernel.org/bpf/68c85acd.050a0220.2ff435.03a4.GAE@google.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250916212251.3490455-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After using numa_set_mempolicy_home_node() the test fails to compile on
systems with libnuma library versioned lower than 2.0.16.
In order to allow lower library version add a pkg-config related check
and exclude that part of the code. Without the proper MPOL setup it
can't be tested.
Make a total number of tests two. The first one is the first batch and
the second is the MPOL related one. The goal is to let the user know if
it has been skipped due to library limitation.
Remove test_futex_mpol(), it was unused and it is now complained by the
compiler if the part is not compiled.
Fixes: 0ecb4232fc ("selftests/futex: Set the home_node in futex_numa_mpol")
Closes: https://lore.kernel.org/oe-lkp/202507150858.bedaf012-lkp@intel.com
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Commit d8e2f91999 ("selftests/futex: Fix some futex_numa_mpol
subtests") removed the "Memory out of range" subtest due to it being
dependent on the memory layout of the test process having an invalid
memory address just after the `*futex_ptr` allocated memory.
Reintroduce this test and make it deterministic, by allocation two
memory pages and marking the second one with PROT_NONE.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Instead of just checking if the syscall failed as expected, check as
well if the returned error code matches the expected error code.
[ bigeasy: reword the commmit message ]
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Add a cached copy of the hardware port-id list that is available at init
before all @dport objects have been instantiated. Change is in preparation
of delayed dport instantiation.
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
basic-gcs has it's own make rule to handle the special compiler
invocation to build against nolibc. This rule does not respect the
$(CFLAGS) passed by the Makefile from the parent directory.
However these $(CFLAGS) set up the include path to include the UAPI
headers from the current kernel.
Due to this the asm/hwcap.h header is used from the toolchain instead of
the UAPI and the definition of HWCAP_GCS is not found.
Restructure the rule for basic-gcs to respect the $(CFLAGS).
Also drop those options which are already provided by $(CFLAGS).
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/lkml/CA+G9fYv77X+kKz2YT6xw7=9UrrotTbQ6fgNac7oohOg8BgGvtw@mail.gmail.com/
Fixes: a985fe6383 ("kselftest/arm64/gcs: Use nolibc's getauxval()")
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
This patch adds tests covering the various paddings in ctx structures.
In case of sk_lookup BPF programs, the behavior is a bit different
because accesses to the padding are explicitly allowed. Other cases
result in a clear reject from the verifier.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/3dc5f025e350aeb2bb1c257b87c577518e574aeb.1758094761.git.paul.chaignon@gmail.com
Move the sizeof_field and offsetofend macros from individual test files
to the common bpf_misc.h to avoid duplication.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/97a3f3788bd3aec309100bc073a5c77130e371fd.1758094761.git.paul.chaignon@gmail.com
We also need coverage for when the malicious user is not using the
proper ioctls definitions and tries to work around the driver.
Most of the scaffholding has been generated by claude-4-sonnet and then
carefully reviewed.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Try to ensure all ioctls are having at least one test.
Most of the scaffholding has been generated by claude-4-sonnet and then
carefully reviewed.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This commit is a rewrite almost from scratch of vmtest.sh.
By relying on virtme-ng, we get rid of boot2container, reducing the
total bootup time (and network requirements). That means that we are
relying on the programs being installed on the host, but that shouldn't
be an issue. The generation of the kconfig is also now handled by
virtme-ng, so that's one less thing to worry.
I used tools/testing/selftests/vsock/vmtest.sh as a base and modified it
to look mostly like my previous script:
- removed the custom ssh handling
- make use of vng for compiling, which allows to bring remote
compilation (and potentially remote compilation on a remote container)
- change the verbosity logic by having 2 levels:
- first one shows the tests outputs
- second level also shows the VM logs
- instead of only running the compiled kernel when it is built, if we
are in the kernel tree, use the kernel artifacts there (and complain
if they are not built)
- adapted the tests list to match the HID subsystem tests
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This model was added as INTEL_PANTHERCOVE_X (based on the name of the
core) with a comment that the platform name is Diamond Rapids. It was
also placed at the end of the file in a new section for family 19
processors.
This is different from previous naming as Andrew Cooper noted.
PeterZ agreed and posted a patch[1] to fix the name and move it in
sequence with other Xeon servers. But without a commit description or
sign-off the patch wasn't ever applied.
Patch updated to cover one additional use of the #define by turbostat
and to change the "Family 6" comment to also list 18 and 19 since new
models in these families are mixed in with family 6.
Originally-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/all/20250214130205.GK14028@noisy.programming.kicks-ass.net/ # [1]
The harness-selftest.expected is not installed in INSTALL_PATH.
Attempting to execute harness-selftest.sh shows warning:
diff: ./kselftest_harness/harness-selftest.expected: No such file or
directory
Add harness-selftest.expected to TEST_FILES.
Link: https://lore.kernel.org/r/20250909082619.584470-1-yi1.lai@intel.com
Fixes: df82ffc5a3 ("selftests: harness: Add kselftest harness selftest")
Signed-off-by: Yi Lai <yi1.lai@intel.com>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The selftests 'make clean' does not clean the net/lib because it only
processes $(TARGETS) and ignores $(INSTALL_DEP_TARGETS). This leaves
compiled objects in net/lib after cleaning, requiring manual cleanup.
Include $(INSTALL_DEP_TARGETS) in clean target to ensure net/lib
dependency is properly cleaned.
Signed-off-by: Nai-Chen Cheng <bleach1827@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/20250910-selftests-makefile-clean-v1-1-29e7f496cd87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check if watchdog device supports WDIOF_KEEPALIVEPING option before
entering keep_alive() ping test loop. Fix watchdog-test silently looping
if ioctl based ping is not supported by the device. Exit from test in
such case instead of getting stuck in loop executing failing keep_alive()
watchdog_info:
identity: m41t93 rtc Watchdog
firmware_version: 0
Support/Status: Set timeout (in seconds)
Support/Status: Watchdog triggers a management or other external alarm not a reboot
Watchdog card disabled.
Watchdog timeout set to 5 seconds.
Watchdog ping rate set to 2 seconds.
Watchdog card enabled.
WDIOC_KEEPALIVE not supported by this device
without this change
Watchdog card disabled.
Watchdog timeout set to 5 seconds.
Watchdog ping rate set to 2 seconds.
Watchdog card enabled.
Watchdog Ticking Away!
(Where test stuck here forver silently)
Updated change log at commit time:
Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250914152840.GA3047348@bhairav-test.ee.iitb.ac.in
Fixes: d89d08ffd2 ("selftests: watchdog: Fix ioctl SET* error paths to take oneshot exit path")
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
While the GCC and Clang compilers already define __ASSEMBLER__
automatically when compiling assembly code, __ASSEMBLY__ is a
macro that only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace
and kernelspace coding, or when dealing with uapi headers that
rather should use __ASSEMBLER__ instead. So let's standardize on
the __ASSEMBLER__ macro that is provided by the compilers now.
This originally was a completely mechanical patch (done with a
simple "sed -i" statement), with some manual fixups during
rebasing of the patch later.
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20250606070952.498274-3-thuth@redhat.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The cpupower_write_sysfs() function currently returns -1 on
write failure, but the function signature indicates it should
return an unsigned int. Returning -1 from an unsigned function
results in a large positive value rather than indicating
an error condition.
Fix this by returning 0 on failure, which is more appropriate
for an unsigned return type and maintains consistency with typical
success/failure semantics where 0 indicates failure and non-zero
indicates success (bytes written).
Link: https://lore.kernel.org/r/20250828063000.803229-1-kaushlendra.kumar@intel.com
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
A small set of fixes for crashes in different commands and conditions.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCaMndGgAKCRCMstVUGiXM
g/IJAP9MynklJNT/wwpusMi9hDFrqiwlhg7W6Z2bHAGsOvS08AEAwORNKs4vMaXY
+7q25ylQuHIAP1cE3vchcCvLuXQIbQo=
=hQ4X
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.17-2025-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"A small set of fixes for crashes in different commands and conditions"
* tag 'perf-tools-fixes-for-v6.17-2025-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf maps: Ensure kmap is set up for all inserts
perf lock: Provide a host_env for session new
perf subcmd: avoid crash in exclude_cmds when excludes is empty
The attribute WGALLOWEDIP_A_IPADDR can contain either an IPv4
or an IPv6 address depending on WGALLOWEDIP_A_FAMILY, however
in practice it is enough to look at the attribute length.
This patch implements an ipv4-or-v6 display hint, that can
deal with this kind of attribute.
It only implements this display hint for genetlink-legacy, it
can be added to other protocol variants if needed, but we don't
want to encourage it's use.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250915144301.725949-12-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds support for decoding hex input, so
that binary attributes can be read through --json.
Example (using future wireguard.yaml):
$ sudo ./tools/net/ynl/pyynl/cli.py --family wireguard \
--do set-device --json '{"ifindex":3,
"private-key":"2a ae 6c 35 c9 4f cf <... to 32 bytes>"}'
In order to somewhat mirror what is done in _formatted_string(),
then for non-binary attributes attempt to convert it to an int.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250915144301.725949-11-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds support for encoding indexed-array
attributes with sub-type nest in pyynl.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250915144301.725949-10-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch moves nest packing into a helper function,
that can also be used for packing indexed arrays.
No behavioural changes intended.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250915144301.725949-9-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since TypeArrayNest can now be used with many other sub-types
than nest, then rename it to TypeIndexedArray, to reduce
confusion.
This patch continues the rename, that was started in commit
aa6485d813 ("ynl: rename array-nest to indexed-array"),
when the YNL type was renamed.
In order to get rid of all references to the old naming,
within ynl, then renaming some variables in _multi_parse().
This is a trivial patch with no behavioural changes intended.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250915144301.725949-8-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In nested arrays don't require that the intermediate attribute
type should be a valid attribute type, it might just be zero
or an incrementing index, it is often not even used.
See include/net/netlink.h about NLA_NESTED_ARRAY:
> The difference to NLA_NESTED is the structure:
> NLA_NESTED has the nested attributes directly inside
> while an array has the nested attributes at another
> level down and the attribute types directly in the
> nesting don't matter.
Example based on include/uapi/linux/wireguard.h:
> WGDEVICE_A_PEERS: NLA_NESTED
> 0: NLA_NESTED
> WGPEER_A_PUBLIC_KEY: NLA_EXACT_LEN, len WG_KEY_LEN
> [..]
> 0: NLA_NESTED
> ...
> ...
Previous the check required that the nested type was valid
in the parent attribute set, which in this case resolves to
WGDEVICE_A_UNSPEC, which is YNL_PT_REJECT, and it took the
early exit and returned YNL_PARSE_CB_ERROR.
This patch renames the old nl_attr_validate() to
__nl_attr_validate(), and creates a new inline function
nl_attr_validate() to mimic the old one.
The new __nl_attr_validate() takes the attribute type as an
argument, so we can use it to validate attributes of a
nested attribute, in the context of the parents attribute
type, which in the above case is generated as:
[WGDEVICE_A_PEERS] = {
.name = "peers",
.type = YNL_PT_NEST,
.nest = &wireguard_wgpeer_nest,
},
__nl_attr_validate() only checks if the attribute length
is plausible for a given attribute type, so the .nest in
the above example is not used.
As the new inline function needs to be defined after
ynl_attr_type(), then the definitions are moved down,
so we avoid a forward declaration of ynl_attr_type().
Some other examples are NL80211_BAND_ATTR_FREQS (nest) and
NL80211_ATTR_SUPPORTED_COMMANDS (u32) both in nl80211-user.c
$ make -C tools/net/ynl/generated nl80211-user.c
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250915144301.725949-7-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor the generation of local variables needed when building
requests, by moving the logic from put_req_nested() into a new
helper put_local_vars(), and use the helper before .attr_put() is
called, thus generating the local variables assumed by .attr_put().
Previously only put_req_nested() generated the variables assumed
by .attr_put(), print_req() only generated the count iterator `i`,
and print_dump() neither generated `i` nor `array`.
This patch fixes the build errors below:
$ make -C tools/net/ynl/generated/
[...]
-e GEN wireguard-user.c
-e GEN wireguard-user.h
-e CC wireguard-user.o
wireguard-user.c: In function ‘wireguard_get_device_dump’:
wireguard-user.c:480:9: error: ‘array’ undeclared (first use in func)
480 | array = ynl_attr_nest_start(nlh, WGDEVICE_A_PEERS);
| ^~~~~
wireguard-user.c:480:9: note: each undeclared identifier is reported
only once for each function it appears in
wireguard-user.c:481:14: error: ‘i’ undeclared (first use in func)
481 | for (i = 0; i < req->_count.peers; i++)
| ^
wireguard-user.c: In function ‘wireguard_set_device’:
wireguard-user.c:533:9: error: ‘array’ undeclared (first use in func)
533 | array = ynl_attr_nest_start(nlh, WGDEVICE_A_PEERS);
| ^~~~~
make: *** [Makefile:52: wireguard-user.o] Error 1
make: Leaving directory '/usr/src/linux/tools/net/ynl/generated'
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250915144301.725949-5-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a check to verify that the sub-type is "nest", and throw an
exception if no policy could be generated, as a guard to prevent
against generating a bad policy.
This is a trivial patch with no behavioural changes intended.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250915144301.725949-4-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds support for NLA_POLICY_NESTED_ARRAY() policies.
Example spec (from future wireguard.yaml):
-
name: wgpeer
attributes:
-
name: allowedips
type: indexed-array
sub-type: nest
nested-attributes: wgallowedip
yields NLA_POLICY_NESTED_ARRAY(wireguard_wgallowedip_nl_policy).
This doesn't change any currently generated code, as it isn't
used in any specs currently used for generating code.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250915144301.725949-3-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow using custom name-prefix with constants,
just like it is for enum and flags declarations.
This is needed for generating WG_KEY_LEN in
include/uapi/linux/wireguard.h from a spec.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250915144301.725949-2-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With indexed-array types such as "ops" from
Documentation/netlink/specs/nlctrl.yaml, the generator creates code
such as:
int nlctrl_getfamily_rsp_parse(const struct nlmsghdr *nlh,
struct ynl_parse_arg *yarg)
{
struct nlctrl_getfamily_rsp *dst;
const struct nlattr *attr_ops;
const struct nlattr *attr;
struct ynl_parse_arg parg;
unsigned int n_ops = 0;
int i;
...
ynl_attr_for_each(attr, nlh, yarg->ys->family->hdr_len) {
unsigned int type = ynl_attr_type(attr);
if (type == CTRL_ATTR_FAMILY_ID) {
...
} else if (type == CTRL_ATTR_OPS) {
const struct nlattr *attr2;
attr_ops = attr;
ynl_attr_for_each_nested(attr2, attr) {
if (ynl_attr_validate(yarg, attr2))
return YNL_PARSE_CB_ERROR;
n_ops++;
}
} else {
...
}
}
if (n_ops) {
dst->ops = calloc(n_ops, sizeof(*dst->ops));
dst->_count.ops = n_ops;
i = 0;
parg.rsp_policy = &nlctrl_op_attrs_nest;
ynl_attr_for_each_nested(attr, attr_ops) {
...
}
}
return YNL_PARSE_CB_OK;
}
It is clear that due to the sequential nature of code execution, when
n_ops (initially zero) is incremented, attr_ops is also assigned from
the value of "attr" (the current iterator).
But some compilers, like gcc version 12.2.0 (Debian 12.2.0-14+deb12u1)
as distributed by Debian Bookworm, seem to be not sophisticated enough
to see this, and fail to compile (warnings treated as errors):
In file included from ../lib/ynl.h:10,
from nlctrl-user.c:9:
In function ‘ynl_attr_data_end’,
inlined from ‘nlctrl_getfamily_rsp_parse’ at nlctrl-user.c:427:3:
../lib/ynl-priv.h:209:44: warning: ‘attr_ops’ may be used uninitialized [-Wmaybe-uninitialized]
209 | return (char *)ynl_attr_data(attr) + ynl_attr_data_len(attr);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
nlctrl-user.c: In function ‘nlctrl_getfamily_rsp_parse’:
nlctrl-user.c:341:30: note: ‘attr_ops’ was declared here
341 | const struct nlattr *attr_ops;
| ^~~~~~~~
It is a pity that we have to do this, but I see no other way than to
suppress the false positive by appeasing the compiler and initializing
the "*attr_{aspec.c_name}" variable with a bogus value (NULL). This will
never be used - at runtime it will always be overwritten when
"n_{struct[anest].c_name}" is non-zero.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250915144414.1185788-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KVM RISC-V now supports SBI FWFT, so add it to the get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20250823155947.1354229-7-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Some common KVM test cases are supported on riscv now as following:
access_tracking_perf_test
dirty_log_perf_test
memslot_modification_stress_test
memslot_perf_test
mmu_stress_test
rseq_test
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Signed-off-by: Dong Yang <dayss1224@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/c447f18115b27562cd65863645e41a5ef89bd37b.1756710918.git.dayss1224@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
To avoid redefinition issues with RISCV_FENCE, directly reference
the existing macro in `rseq-riscv.h`.
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Signed-off-by: Dong Yang <dayss1224@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/85e5e51757c9289ca463fbc4ba6d22f9c9db791b.1756710918.git.dayss1224@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The KVM RISC-V allows Zfbfmin/Zvfbfmin/Zvfbfwma extensions for Guest/VM
so add them to get-reg-list test.
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Link: https://lore.kernel.org/r/40e52ff7053401a2fcb206e75f45ebc8557fc28b.1754646071.git.zhouquan@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
Some attribute-set have a documentation (doc:), but it was not displayed
in the RST / HTML version. Such field can be found in ethtool, netdev,
tcp_metrics and team YAML files.
Only the 'name' and 'attributes' fields from an 'attribute-set' section
were parsed. Now the content of the 'doc' field, if available, is added
as a new paragraph before listing each attribute. This is similar to
what is done when parsing the 'operations'.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250913-net-next-ynl-attr-doc-rst-v3-1-4f06420d87db@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RX devmem sometimes fails on NIPA:
https://netdev-3.bots.linux.dev/vmksft-fbnic-qemu-dbg/results/294402/7-devmem-py/
Both RSS and flow steering are properly installed, but the wait_port_listen
fails. Try to remove sleep(1) to see if the cause of the failure is
spending too much time during RX setup. I don't see a good reason to
have sleep in the first place. If there needs to be a delay between
installing the rules and receiving the traffic, let's add it to the
callers (devmem.py) instead.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250912170611.676110-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The client-side function connect_one_server() properly closes its IPC
descriptor after use, but the server-side code in both mptcp_sockopt.c
and mptcp_inq.c was missing corresponding close() calls for their IPC
descriptors, leaving file descriptors open unnecessarily.
This change ensures proper cleanup by:
1. Adding missing close(pipefds[0]/unixfds[0]) in server processes
2. Adding close(pipefds[1]/unixfds[1]) after server() function calls
This ensures both ends of the IPC pipe are properly closed in their
respective processes, preventing file descriptor leaks.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-next-mptcp-minor-fixes-6-18-v1-2-99d179b483ad@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The server file descriptor ('fd') is opened in server() but never closed.
While accepted connections are properly closed in process_one_client(),
the main listening socket remains open, causing a resource leak.
This patch ensures the server fd is properly closed after processing
clients, bringing the sockopt and inq test cases in line with proper
resource cleanup practices.
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-next-mptcp-minor-fixes-6-18-v1-1-99d179b483ad@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes several issues in the error reporting of the MPTCP sockopt
selftest:
1. Fix diff not printed: The error messages for counter mismatches had
the actual difference ('diff') as argument, but it was missing in the
format string. Displaying it makes the debugging easier.
2. Fix variable usage: The error check for 'mptcpi_bytes_acked' incorrectly
used 'ret2' (sent bytes) for both the expected value and the difference
calculation. It now correctly uses 'ret' (received bytes), which is the
expected value for bytes_acked.
3. Fix off-by-one in diff: The calculation for the 'mptcpi_rcv_delta' diff
was 's.mptcpi_rcv_delta - ret', which is off-by-one. It has been
corrected to 's.mptcpi_rcv_delta - (ret + 1)' to match the expected
value in the condition above it.
Fixes: 5dcff89e14 ("selftests: mptcp: explicitly tests aggregate counters")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-5-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous commit adds the MPTCP_PM_EV_FLAG_DENY_JOIN_ID0 flag. Make
sure it is correctly announced by the other peer when it has been
received.
pm_nl_ctl will now display 'deny_join_id0:1' when monitoring the events,
and when this flag was set by the other peer.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 702c2f646d ("mptcp: netlink: allow userspace-driven subflow establishment")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-3-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To be able to find which capture files have been produced after several
runs.
This prefix was not printed anywhere before.
While at it, always use the same prefix by taking info from ns1, instead
of "$connector_ns", which is sometimes ns1, sometimes ns2 in the
subtests.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-5-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is better than printing random bytes in the terminal.
Note that Jakub suggested 'hexdump', but Mat found out this tool is not
often installed by default. 'od' can do a similar job, and it is in the
POSIX specs and available in coreutils, so it should be on more systems.
While at it, display a few more bytes, just to fill in the two lines.
And no need to display the 3rd only line showing the next number of
bytes: 0000040.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-4-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The disconnect test-case, with 'plain' TCP sockets generates spurious
errors, e.g.
07 ns1 TCP -> ns1 (dead:beef:1::1:10006) MPTCP
read: Connection reset by peer
read: Connection reset by peer
(duration 155ms) [FAIL] client exit code 3, server 3
netns ns1-FloSdv (listener) socket stat for 10006:
TcpActiveOpens 2 0.0
TcpPassiveOpens 2 0.0
TcpEstabResets 2 0.0
TcpInSegs 274 0.0
TcpOutSegs 276 0.0
TcpOutRsts 3 0.0
TcpExtPruneCalled 2 0.0
TcpExtRcvPruned 1 0.0
TcpExtTCPPureAcks 104 0.0
TcpExtTCPRcvCollapsed 2 0.0
TcpExtTCPBacklogCoalesce 42 0.0
TcpExtTCPRcvCoalesce 43 0.0
TcpExtTCPChallengeACK 1 0.0
TcpExtTCPFromZeroWindowAdv 42 0.0
TcpExtTCPToZeroWindowAdv 41 0.0
TcpExtTCPWantZeroWindowAdv 13 0.0
TcpExtTCPOrigDataSent 164 0.0
TcpExtTCPDelivered 165 0.0
TcpExtTCPRcvQDrop 1 0.0
In the failing scenarios (TCP -> MPTCP), the involved sockets are
actually plain TCP ones, as fallbacks for passive sockets at 2WHS time
cause the MPTCP listeners to actually create 'plain' TCP sockets.
Similar to commit 218cc16632 ("selftests: mptcp: avoid spurious errors
on disconnect"), the root cause is in the user-space bits: the test
program tries to disconnect as soon as all the pending data has been
spooled, generating an RST. If such option reaches the peer before the
connection has reached the closed status, the TCP socket will report an
error to the user-space, as per protocol specification, causing the
above failure. Note that it looks like this issue got more visible since
the "tcp: receiver changes" series from commit 06baf9bfa6 ("Merge
branch 'tcp-receiver-changes'").
Address the issue by explicitly waiting for the TCP sockets (-t) to
reach a closed status before performing the disconnect. More precisely,
the test program now waits for plain TCP sockets or TCP subflows in
addition to the MPTCP sockets that were already monitored.
While at it, use 'ss' with '-n' to avoid resolving service names, which
is not needed here.
Fixes: 218cc16632 ("selftests: mptcp: avoid spurious errors on disconnect")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-3-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IO errors were correctly printed to stderr, and propagated up to the
main loop for the server side, but the returned value was ignored. As a
consequence, the program for the listener side was no longer exiting
with an error code in case of IO issues.
Because of that, some issues might not have been seen. But very likely,
most issues either had an effect on the client side, or the file
transfer was not the expected one, e.g. the connection got reset before
the end. Still, it is better to fix this.
The main consequence of this issue is the error that was reported by the
selftests: the received and sent files were different, and the MIB
counters were not printed. Also, when such errors happened during the
'disconnect' tests, the program tried to continue until the timeout.
Now when an IO error is detected, the program exits directly with an
error.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-2-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For the tc police action, iproute2 rounds up mtu and burst sizes to a
higher order representation. For example, if the user specifies the default
mtu for a police action instance (4294967295 bytes), iproute2 will output
it as 4096Mb when this action instance is dumped. After Jay's changes [1],
iproute2 will round up to Gb, so 4096Mb becomes 4Gb. With that in mind,
fix police's tc test output so that it works both with the current
iproute2 version and Jay's.
[1] https://lore.kernel.org/netdev/20250907014216.2691844-1-jay.vosburgh@canonical.com/
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Cong Wang <cwang@multikernel.io>
Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://patch.msgid.link/20250912154616.67489-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 0e2fb011a0 ("selftests/bpf: Clean up open-coded gettid syscall
invocations") addressed the issue that older libc may not have a gettid()
function call wrapper for the associated syscall.
A few more instances have crept into tests, use sys_gettid() instead, and
poison raw gettid() usage to avoid future issues.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250911163056.543071-1-alan.maguire@oracle.com
Make sure that we only switch the cgroup namespace and enter a new
cgroup in a child process separate from test_progs, to not mess up the
environment for subsequent tests.
To remove this cgroup, we need to wait for the child to exit, and then
rmdir its cgroup. If the read call fails, or waitpid succeeds, we know
the child exited (read call would fail when the last pipe end is closed,
otherwise waitpid waits until exit(2) is called). We then invoke a newly
introduced remove_cgroup_pid() helper, that identifies cgroup path using
the passed in pid of the now dead child, instead of using the current
process pid (getpid()).
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250915032618.1551762-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For systems having CONFIG_NR_CPUS set to > 1024 in kernel config
the selftest fails as arena_spin_lock_irqsave() returns EOPNOTSUPP.
(eg - incase of powerpc default value for CONFIG_NR_CPUS is 8192)
The selftest is skipped incase bpf program returns EOPNOTSUPP,
with a descriptive message logged.
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Link: https://lore.kernel.org/r/20250913091337.1841916-1-skb99@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Like commit fbdd61c94b ("selftests/bpf: Skip timer cases when bpf_timer is not supported"),
'timer_interrupt' test case should be skipped if verifier rejects
bpf_timer with returning -EOPNOTSUPP.
cd tools/testing/selftests/bpf
./test_progs -t timer
461 timer_interrupt:SKIP
Summary: 6/0 PASSED, 7 SKIPPED, 0 FAILED
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250915121657.28084-1-leon.hwang@linux.dev
With "bpftool prog tracelog", bpftool prints messages from the trace
pipe. To do so, it first needs to find the tracefs mount point to open
the pipe. Bpftool looks at a few "default" locations, including
/sys/kernel/debug/tracing and /sys/kernel/tracing.
Some of these locations, namely /tracing and /trace, are not standard.
They are in the list because some users used to hardcode the tracing
directory to short names; but we have no compelling reason to look at
these locations. If we fail to find the tracefs at the default
locations, we have an additional step to find it by parsing /proc/mounts
anyway, so it's safe to remove these entries from the list of default
locations to check.
Additionally, Alexei reports that looking for the tracefs at
/sys/kernel/debug/tracing may automatically mount the file system under
that location, and generate a kernel log message telling that
auto-mounting there is deprecated. To avoid this message, let's swap the
order for checking the potential mount points: try /sys/kernel/tracing
first, which should be the standard location nowadays. The kernel log
message may still appear if the tracefs is not mounted on
/sys/kernel/tracing when we run bpftool.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Closes: https://lore.kernel.org/r/CAADnVQLcMi5YQhZKsU4z3S2uVUAGu_62C33G2Zx_ruG3uXa-Ug@mail.gmail.com/
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250915134209.36568-1-qmo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
__maps__fixup_overlap_and_insert may split or directly insert a map,
when doing this the map may need to have a kmap set up for the sake of
the kmaps. The missing kmap set up fails the check_invariants test in
maps, later "Internal error" reports from map__kmap and ultimately
causes segfaults.
Similar fixes were added in commit e0e4e0b8b7 ("perf maps: Add
missing map__set_kmap_maps() when replacing a kernel map") and commit
25d9c0301d ("perf maps: Set the kmaps for newly created/added kernel
maps") but they missed cases. To try to reduce the risk of this,
update the kmap directly following any manual insert. This identified
another problem in maps__copy_from.
Fixes: e0e4e0b8b7 ("perf maps: Add missing map__set_kmap_maps() when replacing a kernel map")
Fixes: 25d9c0301d ("perf maps: Set the kmaps for newly created/added kernel maps")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add basic support to run various MIPS variants via kunit_tool using the
virtualized malta platform.
Link: https://lore.kernel.org/r/20250908-kunit-mips-v5-1-d9f0632d1854@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Various KUnit tests require PCI infrastructure to work. All normal
platforms enable PCI by default, but UML does not. Enabling PCI from
.kunitconfig files is problematic as it would not be portable. So in
commit 6fc3a8636a ("kunit: tool: Enable virtio/PCI by default on UML")
PCI was enabled by way of CONFIG_UML_PCI_OVER_VIRTIO=y. However
CONFIG_UML_PCI_OVER_VIRTIO requires additional configuration of
CONFIG_UML_PCI_OVER_VIRTIO_DEVICE_ID or will otherwise trigger a WARN() in
virtio_pcidev_init(). However there is no one correct value for
UML_PCI_OVER_VIRTIO_DEVICE_ID which could be used by default.
This warning is confusing when debugging test failures.
On the other hand, the functionality of CONFIG_UML_PCI_OVER_VIRTIO is not
used at all, given that it is completely non-functional as indicated by
the WARN() in question. Instead it is only used as a way to enable
CONFIG_UML_PCI which itself is not directly configurable.
Instead of going through CONFIG_UML_PCI_OVER_VIRTIO, introduce a custom
configuration option which enables CONFIG_UML_PCI without triggering
warnings or building dead code.
Link: https://lore.kernel.org/r/20250908-kunit-uml-pci-v2-1-d8eba5f73c9d@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The uprobe syscall now returns -ENXIO errno when called outside
kernel trampoline, fixing the current sigill test to reflect that
and renaming it to uprobe_error.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
The function ap_is_valid_checksum() has a boolean name suggesting it
should return TRUE/FALSE, but incorrectly returns AE_OK on success and
has no explicit return on failure, leading to undefined behavior.
Fix by returning proper values:
- FALSE when checksum validation fails
- TRUE when checksum validation succeeds
Link: https://github.com/acpica/acpica/commit/479ba862
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Partially revert commit 70662db73d ("ACPICA: Apply ACPI_NONSTRING in
more places") as I've yet again incorrectly applied the ACPI_NONSTRING
attribute where it is not needed.
A warning was initially reported by Collin Funk [1], and further review
by Jiri Slaby [2] highlighted another issue related to the same commit.
Drop the ACPI_NONSTRING attribute to fix the issue.
Fixes: 70662db73d ("ACPICA: Apply ACPI_NONSTRING in more places")
Link: https://lore.kernel.org/all/87ecvpcypw.fsf@gmail.com [1]
Link: https://lore.kernel.org/all/5c210121-c9b8-4458-b1ad-0da24732ac72@kernel.org [2]
Link: https://github.com/acpica/acpica/commit/a6ee09ca
Reported-by: Collin Funk <collin.funk1@gmail.com>
Signed-off-by: Ahmed Salem <x0rw3ll@gmail.com>
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add ACPI_NONSTRING for destination char arrays without a terminating NUL
character.
This is a follow-up to commit 2b82118845 ("ACPICA: Apply ACPI_NONSTRING")
where a few more destination arrays were missed.
Link: https://github.com/acpica/acpica/commit/f359e5ed
Fixes: 2b82118845 ("ACPICA: Apply ACPI_NONSTRING")
Signed-off-by: Ahmed Salem <x0rw3ll@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Intel int340x thermal driver changes for 6.18:
- Add support for new "power slider" firmware interface to the int340x
thermal driver end enable it for Panther Lake platforms (Srinivas
Pandruvada)
- Remove a redundant ACPI control method evaluation from the int340x
thermal driver (Salah Triki)
and clean it up.
* thermal-intel:
thermal: intel: selftests: workload_hint: Mask unsupported types
thermal: intel: int340x: Add module parameter to change slider offset
thermal: intel: int340x: Add module parameter for balanced Slider
thermal: intel: int340x: Enable power slider interface for Panther Lake
thermal: intel: int340x: Add support for power slider
thermal: intel: int340x: Remove redundant acpi_has_method() call
This test ensures that upon receiving decapsulated packets from a
tunnel interface in openvswitch, the tunnel metadata fields are
properly populated. This partially covers interoperability of the
kernel tunnel ports and openvswitch tunnels (LWT) and parsing and
formatting of the tunnel metadata fields of the openvswitch netlink
uAPI. Doing so, this test also ensures that fields and flags are
properly extracted during decapsulation by the tunnel core code,
serving as a regression test for the previously fixed issue with the
DF bit not being extracted from the outer IP header.
The ovs-dpctl.py script already supports all that is necessary for
the tunnel ports for this test, so we only need to adjust the
ovs_add_if() function to pass the '-t' port type argument in order
to be able to create tunnel ports in the openvswitch datapath.
Reviewed-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20250909165440.229890-3-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enhanced display logic to conditionally show PSI information only when
successfully read, with helpful guidance for users to enable PSI support
(psi=1 cmdline parameter).
Link: https://lkml.kernel.org/r/20250907001417537vSx6nUsb3ILqI0iQ-WnGp@zte.com.cn
Signed-off-by: Fan Yu <fan.yu9@zte.com.cn>
Reviewed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The original delaytop only supported static output with limited
interaction. Users had to restart the tool with different command-line
options to change sorting or display modes, which disrupted continuous
monitoring and reduced productivity during performance investigations.
Adds real-time interactive controls through keyboard input:
1) Add interactive menu system with visual prompts
2) Support dynamic sorting changes without restarting
3) Enable toggle of memory verbose mode with 'M' key
The interactive mode transforms delaytop from a static monitoring tool
into a dynamic investigation platform, allowing users to adapt the view in
real-time based on observed performance patterns.
Link: https://lkml.kernel.org/r/20250907001338580EURha20BxWFmBSrUpS8D1@zte.com.cn
Signed-off-by: Fan Yu <fan.yu9@zte.com.cn>
Reviewed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The original delaytop tool always displayed detailed memory subsystem
breakdown, which could be overwhelming for users who only need high-level
overview.
Add flexible display control allowing users to choose their preferred
information granularity.
The new flexibility provides:
1) For quick monitoring: use normal mode to reduce visual clutter
2) For deep analysis: use verbose mode to see all memory subsystem details
Link: https://lkml.kernel.org/r/202509070012527934u0ySb3teQ4gOYKnocyNO@zte.com.cn
Signed-off-by: Fan Yu <fan.yu9@zte.com.cn>
Reviewed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The str_vsyscall_* constants in proc-pid-vm.c triggers
-Wunused-const-variable warnings with gcc-13.32 and clang 18.1.
Define and apply __maybe_unused locally to suppress the warnings. No
functional change
Fixes compiler warning:
warning: `str_vsyscall_*' defined but not used[-Wunused-const-variable]
Link: https://lkml.kernel.org/r/20250820175610.83014-1-reddybalavignesh9979@gmail.com
Signed-off-by: Bala-Vignesh-Reddy <reddybalavignesh9979@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This line in tools/testing/selftests/proc/read.c was added to catch
oopses, not to verify lseek correctness:
(void)lseek(fd, 0, SEEK_SET);
Oh, well. Prevent more embarassement with simple test.
Link: https://lkml.kernel.org/r/aKTCfMuRXOpjBXxI@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "ida: Remove the ida_simple_xxx() API", v3.
These are the final steps in removing the ida_simple_xxx() API.
This series was last proposed in August 2024. Since then, some users of
the old API have be re-introduced and then removed.
A first time in drivers/misc/rpmb-core.c, added in commit 1e9046e3a1
("rpmb: add Replay Protected Memory Block (RPMB) subsystem") (2024-08-26)
and removed in commit dfc881abca ("rpmb: Remove usage of the deprecated
ida_simple_xx() API") (2024-10-13).
A second time in drivers/gpio/gpio-mpsse.c, added in commit c46a74ff05
("gpio: add support for FTDI's MPSSE as GPIO") (2024-10-14) and removed in
commit f57c084928 (gpio: mpsse: Remove usage of the deprecated
ida_simple_xx() API) (2024-11-22).
Since then, I've not spotted any new usage.
So things being stable now, it's time to end this story once and for all.
This patch (of 3):
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_range()/ida_alloc_max() is inclusive. But because of the ranges
used for the tests, there is no need to adjust them.
While at it remove some useless {}.
Link: https://lkml.kernel.org/r/cover.1752480043.git.christophe.jaillet@wanadoo.fr
Link: https://lkml.kernel.org/r/2904fa2006e4fe58eea63aef87fa7f832c7804a1.1752480043.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
32 bit nodes have a larger branching factor. This affects the required
value to cause a height change. Update the spanning store height test to
work for both 64 and 32 bit nodes.
Link: https://lkml.kernel.org/r/20250828003023.418966-3-Liam.Howlett@oracle.com
Fixes: f9d3a963fe ("maple_tree: use height and depth consistently")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "maple_tree: Fix testing for 32bit compiles".
The maple tree test suite supports 32bit builds which causes 32bit nodes
and index/last values. Some tests have too large values and must be
skipped while others depend on certain actions causing the tree to be
altered in another measurable way (such as the height decreasing or
increasing).
Two tests were added that broke 32bit testing, either by compile warnings
or failures. These fixes restore the tests to a working order.
Building 32bit version can be done on a 32bit platform, or by using a
command like: BUILD=32 make clean maple
This patch (of 2):
Some tests are invalid on 32bit due to the size of the index and last.
Making those tests depend on the correct build flags stops compile
complaints.
Link: https://lkml.kernel.org/r/20250828003023.418966-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20250828003023.418966-2-Liam.Howlett@oracle.com
Fixes: 5d659bbb52 ("maple_tree: introduce mas_wr_store_type()")
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The shared userspace logic used for unit-testing maple tree and VMA code
currently has its own replacements for atomics helpers. This is not
needed as the necessary APIs already have userspace implementations in the
tools tree. Switching over to that allows deleting a bit of code.
Note that the implementation is different; while the version being deleted
here is implemented using liburcu, the existing version in tools uses
either x86 asm or compiler builtins. It's assumed that both are equally
likely to be correct.
The tools tree's version of atomic_t is a struct type while the version
being deleted was just a typedef of an integer. This means it's no longer
valid to call __sync_bool_compare_and_swap() directly on it. One option
would be to just peek into the struct and call it on the field, but it
seems a little cleaner to just use the corresponding atomic.h API whic has
been added recently. Now the fake mapping_map_writable() is copied from
the real one.
Link: https://lkml.kernel.org/r/20250828-b4-vma-no-atomic-h-v2-4-02d146a58ed2@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This allows the user to set cflags when building tests that use this
shared build infrastructure.
For example, it enables building with -Werror so that patch-check scripts
will fail:
make -C tools/testing/vma -j EXTRA_CFLAGS=-Werror
Link: https://lkml.kernel.org/r/20250828-b4-vma-no-atomic-h-v2-3-02d146a58ed2@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Pedro Falcato <pfalcato@suse.de>
Cc: Jann Horn <jannh@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is an arch/ tree under tools. This contains some useful stuff, to
make that available, add it to the -I flags. This requires $(SRCARCH),
which is provided by Makefile.arch, so include that..
There still aren't that many headers so also just smush all of them into
SHARED_DEPS instead of starting to do any header dependency hocus pocus.
Link: https://lkml.kernel.org/r/20250828-b4-vma-no-atomic-h-v2-2-02d146a58ed2@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Pedro Falcato <pfalcato@suse.de>
Cc: Jann Horn <jannh@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "tools: testing: Use existing atomic.h for vma/maple tests",
v2.
De-duplicating this lets us delete a bit of code.
Ulterior motive: I'm working on a new set of the userspace-based unit
tests, which will need the atomics API too. That would involve even more
duplication, so while the win in this patchset alone is very minimal, it
looks a lot more significant with my other WIP patchset.
I've tested these commands:
make -C tools/testing/vma -j
tools/testing/vma/vma
make -C tools/testing/radix-tree -j
tools/testing/radix-tree/maple
Note the EXTRA_CFLAGS patch is actually orthogonal, let me know if you'd
prefer I send it separately.
This patch (of 4):
The VMA tests need an operation equivalent to atomic_inc_unless_negative()
to implement a fake mapping_map_writable(). Adding it will enable them to
switch to the shared atomic headers and simplify that fake implementation.
In order to add that, also add atomic_try_cmpxchg() which can be used to
implement it. This is copied from Documentation/atomic_t.txt. Then,
implement atomic_inc_unless_negative() itself based on the
raw_atomic_dec_unless_positive() in
include/linux/atomic/atomic-arch-fallback.h.
There's no present need for a highly-optimised version of this (nor any
reason to think this implementation is sub-optimal on x86) so just
implement this with generic C, no x86-specifics.
Link: https://lkml.kernel.org/r/20250828-b4-vma-no-atomic-h-v2-0-02d146a58ed2@google.com
Link: https://lkml.kernel.org/r/20250828-b4-vma-no-atomic-h-v2-1-02d146a58ed2@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The test requires at least 2 * (bytes/page_size) hugetlb memory, since we
require identical number of hugepages for src and dst location. Fix this.
Along with the above, as explained in patch "selftests/mm/uffd-stress:
Make test operate on less hugetlb memory", the racy nature of the test
requires that we have some extra number of hugepages left beyond what is
required. Therefore, stricten this constraint.
Link: https://lkml.kernel.org/r/20250909061531.57272-3-dev.jain@arm.com
Fixes: 5a6aa60d18 ("selftests/mm: skip uffd hugetlb tests with insufficient hugepages")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/mm: uffd-stress fixes", v2.
This patchset ensures that the number of hugepages is correctly set in the
system so that the uffd-stress test does not fail due to the racy nature
of the test. Patch 1 changes the hugepage constraint in the
run_vmtests.sh script, whereas patch 2 changes the constraint in the test
itself.
This patch (of 2):
We observed uffd-stress selftest failure on arm64 and intermittent
failures on x86 too:
running ./uffd-stress hugetlb-private 128 32
bounces: 17, mode: rnd read, ERROR: UFFDIO_COPY error: -12 (errno=12, @uffd-common.c:617) [FAIL]
not ok 18 uffd-stress hugetlb-private 128 32 # exit=1
For this particular case, the number of free hugepages from run_vmtests.sh
will be 128, and the test will allocate 64 hugepages in the source
location. The stress() function will start spawning threads which will
operate on the destination location, triggering uffd-operations like
UFFDIO_COPY from src to dst, which means that we will require 64 more
hugepages for the dst location.
Let us observe the locking_thread() function. It will lock the mutex kept
at dst, triggering uffd-copy. Suppose that 127 (64 for src and 63 for
dst) hugepages have been reserved. In case of BOUNCE_RANDOM, it may
happen that two threads trying to lock the mutex at dst, try to do so at
the same hugepage number. If one thread succeeds in reserving the last
hugepage, then the other thread may fail in alloc_hugetlb_folio(),
returning -ENOMEM. I can confirm that this is indeed the case by this
hacky patch:
:--- a/mm/hugetlb.c
; +++ b/mm/hugetlb.c
; @@ -6929,6 +6929,11 @@ int hugetlb_mfill_atomic_pte(pte_t *dst_pte,
;
; folio = alloc_hugetlb_folio(dst_vma, dst_addr, false);
; if (IS_ERR(folio)) {
; + pte_t *actual_pte = hugetlb_walk(dst_vma, dst_addr, PMD_SIZE);
; + if (actual_pte) {
; + ret = -EEXIST;
; + goto out;
; + }
; ret = -ENOMEM;
; goto out;
; }
This code path gets triggered indicating that the PMD at which one thread
is trying to map a hugepage, gets filled by a racing thread.
Therefore, instead of using freepgs to compute the amount of memory, use
freepgs - (min(32, nr_cpus) - 1), so that the test still has some extra
hugepages to use. The adjustment is a function of min(32, nr_cpus) - the
value of nr_parallel in the test - because in the worst case, nr_parallel
number of threads will try to map a hugepage on the same PMD, one will win
the allocation race, and the other nr_parallel - 1 threads will fail, so
we need extra nr_parallel - 1 hugepages to satisfy this request. Note
that, in case the adjusted value underflows, there is a check for the
number of free hugepages in the test itself, which will fail:
get_free_hugepages() < bytes / page_size A negative value will be passed
on to bytes which is of type size_t, thus the RHS will become a large
value and the check will fail, so we are safe.
Link: https://lkml.kernel.org/r/20250909061531.57272-1-dev.jain@arm.com
Link: https://lkml.kernel.org/r/20250909061531.57272-2-dev.jain@arm.com
Signed-off-by: Dev Jain <dev.jain@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As per Documentation/process/deprecated.rst, dynamic size calculations
should not be performed in memory allocator arguments due to possible
overflows.
Replace malloc with calloc to avoid open-ended arithmetic and prevent
possible overflows.
Link: https://lkml.kernel.org/r/20250825170643.63174-1-viswanathiyyappan@gmail.com
Signed-off-by: I Viswanath <viswanathiyyappan@gmail.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed by: Donet Tom <donettom@linux.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Several selftests subdirectories duplicated the define __maybe_unused,
leading to redundant code. Move to kselftest.h header and remove other
definitions.
This addresses the duplication noted in the proc-pid-vm warning fix
Link: https://lkml.kernel.org/r/20250821101159.2238-1-reddybalavignesh9979@gmail.com
Signed-off-by: Bala-Vignesh-Reddy <reddybalavignesh9979@gmail.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Link:https://lore.kernel.org/lkml/20250820143954.33d95635e504e94df01930d0@linux-foundation.org/
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Mickal Salan <mic@digikod.net> [landlock]
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix simple typos in function name and console message.
Link: https://lkml.kernel.org/r/20250823170208.184149-1-allyheev@gmail.com
Signed-off-by: ally heev <allyheev@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As David suggested, currently we don't have a high level test case to
verify the behavior of rmap. This patch introduce the verification on
rmap by migration.
The general idea is if migrate one shared page between processes, this
would be reflected in all related processes. Otherwise, we have problem
in rmap.
Currently it covers following four scenarios:
* anonymous page
* shmem page
* pagecache page
* ksm page
Link: https://lkml.kernel.org/r/20250819080047.10063-3-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "test that rmap behaves as expected", v4.
As David suggested, currently we don't have a high level test case to
verify the behavior of rmap. This patch set introduce the verification
on rmap by migration.
Patch 1 is a preparation to move ksm related operations into vm_util.
Patch 2 is the new test case for rmap.
Currently it covers following four scenarios:
* anonymous page
* shmem page
* pagecache page
* ksm page
This patch (of 2):
There are some general ksm operations could be used by other related
test cases. Put them into vm_util for common use.
This is a preparation patch for later use.
Link: https://lkml.kernel.org/r/20250819080047.10063-1-richard.weiyang@gmail.com
Link: https://lkml.kernel.org/r/20250819080047.10063-2-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Instead of just checking the existence of PMD folios before and after folio
split tests, use check_folio_orders() to check after-split folio orders.
The split ranges in split_thp_in_pagecache_to_order_at() are changed to
[addr, addr + pagesize) for every pmd_pagesize. It prevents folios within
the range being split multiple times due to debugfs split function always
perform splits with a pagesize step for a given range.
The following tests are not changed:
1. split_pte_mapped_thp: the test already uses kpageflags to check;
2. split_file_backed_thp: no vaddr available.
Link: https://lkml.kernel.org/r/20250818184622.1521620-6-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: wang lian <lianux.mm@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The helper gathers a folio order statistics of folios within a virtual
address range and checks it against a given order list. It aims to provide
a more precise folio order check instead of just checking the existence of
PMD folios.
The helper will be used the upcoming commit.
Link: https://lkml.kernel.org/r/20250818184622.1521620-5-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: wang lian <lianux.mm@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
and rename it to is_backed_by_folio().
is_backed_by_folio() checks if the given vaddr is backed a folio with
a given order. It does so by:
1. getting the pfn of the vaddr;
2. checking kpageflags of the pfn;
if order is greater than 0:
3. checking kpageflags of the head pfn;
4. checking kpageflags of all tail pfns.
pmd_order is added to split_huge_page_test.c and replaces max_order.
[ziy@nvidia.com: reduce code duplication, per David]
Link: https://lkml.kernel.org/r/F54782D6-65A3-4D35-AE03-8ADE636EE258@nvidia.com
Link: https://lkml.kernel.org/r/20250818184622.1521620-4-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: wang lian <lianux.mm@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All functions are only used within the file.
Link: https://lkml.kernel.org/r/20250818184622.1521620-3-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: wang lian <lianux.mm@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The test will set the global system THP setting to never, madvise or
always depending on the fixture variant and the 2M setting to inherit
before it starts (and reset to original at teardown). The fixture setup
will also test if PR_SET_THP_DISABLE prctl call can be made with
PR_THP_DISABLE_EXCEPT_ADVISED and skip if it fails.
This tests if the process can:
- successfully get the policy to disable THPs expect for madvise.
- get hugepages only on MADV_HUGE and MADV_COLLAPSE if the global policy
is madvise/always and only with MADV_COLLAPSE if the global policy is
never.
- successfully reset the policy of the process.
- after reset, only get hugepages with:
- MADV_COLLAPSE when policy is set to never.
- MADV_HUGE and MADV_COLLAPSE when policy is set to madvise.
- always when policy is set to "always".
- never get a THP with MADV_NOHUGEPAGE.
- repeat the above tests in a forked process to make sure the policy is
carried across forks.
Test results:
./prctl_thp_disable
TAP version 13
1..12
ok 1 prctl_thp_disable_completely.never.nofork
ok 2 prctl_thp_disable_completely.never.fork
ok 3 prctl_thp_disable_completely.madvise.nofork
ok 4 prctl_thp_disable_completely.madvise.fork
ok 5 prctl_thp_disable_completely.always.nofork
ok 6 prctl_thp_disable_completely.always.fork
ok 7 prctl_thp_disable_except_madvise.never.nofork
ok 8 prctl_thp_disable_except_madvise.never.fork
ok 9 prctl_thp_disable_except_madvise.madvise.nofork
ok 10 prctl_thp_disable_except_madvise.madvise.fork
ok 11 prctl_thp_disable_except_madvise.always.nofork
ok 12 prctl_thp_disable_except_madvise.always.fork
[usamaarif642@gmail.com: return after executing test in child process]
Link: https://lkml.kernel.org/r/3dca2de4-9a6a-4efe-a86c-83f9509831fc@gmail.com
Link: https://lkml.kernel.org/r/20250815135549.130506-8-usamaarif642@gmail.com
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yafang <laoar.shao@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The test will set the global system THP setting to never, madvise or
always depending on the fixture variant and the 2M setting to inherit
before it starts (and reset to original at teardown). The fixture setup
will also test if PR_SET_THP_DISABLE prctl call can be made to disable all
THPs and skip if it fails.
This tests if the process can:
- successfully get the policy to disable THPs completely.
- never get a hugepage when the THPs are completely disabled
with the prctl, including with MADV_HUGE and MADV_COLLAPSE.
- successfully reset the policy of the process.
- after reset, only get hugepages with:
- MADV_COLLAPSE when policy is set to never.
- MADV_HUGE and MADV_COLLAPSE when policy is set to madvise.
- always when policy is set to "always".
- never get a THP with MADV_NOHUGEPAGE.
- repeat the above tests in a forked process to make sure
the policy is carried across forks.
[usamaarif642@gmail.com: return after executing test in child process]
Link: https://lkml.kernel.org/r/2d0ea708-ecba-4021-b6ca-e93f1413d60a@gmail.com
[usamaarif642@gmail.com: include linux/mman.h for prctl_thp_disable]
Link: https://lkml.kernel.org/r/20250910204609.1720498-1-usamaarif642@gmail.com
Link: https://lore.kernel.org/all/c8249725-e91d-4c51-b9bb-40305e61e20d@sirena.org.uk/
Link: https://lkml.kernel.org/r/20250815135549.130506-7-usamaarif642@gmail.com
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yafang <laoar.shao@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The function already has 2 uses and will have a 3rd one in prctl
selftests. The pagesize argument is added into the function, as it's not
a global variable anymore. No functional change intended with this patch.
Link: https://lkml.kernel.org/r/20250815135549.130506-6-usamaarif642@gmail.com
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yafang <laoar.shao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Gracefully skip test if userfaultfd is not supported (ENOSYS) or not
permitted (EPERM), instead of failing. This avoids misleading failures
with clear skip messages.
--------------
Before Patch
--------------
~ running ./hugepage-mremap
...
~ Bail out! userfaultfd: Function not implemented
~ Planned tests != run tests (1 != 0)
~ Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0
~ [FAIL]
not ok 4 hugepage-mremap # exit=1
--------------
After Patch
--------------
~ running ./hugepage-mremap
...
~ ok 2 # SKIP userfaultfd is not supported/not enabled.
~ 1 skipped test(s) detected.
~ Totals: pass:0 fail:0 xfail:0 xpass:0 skip:1 error:0
~ [SKIP]
ok 4 hugepage-mremap # SKIP
Link: https://lkml.kernel.org/r/20250816040113.760010-8-aboorvad@linux.ibm.com
Co-developed-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Make thuge-gen skip instead of fail when it can't run due to system
settings. If shmmax is too small or no 1G huge pages are available, the
test now prints a warning and is marked as skipped.
-------------------
Before Patch:
-------------------
~ running ./thuge-gen
~ Bail out! Please do echo 262144 > /proc/sys/kernel/shmmax
~ Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0
~ [FAIL]
not ok 28 thuge-gen ~ exit=1
-------------------
After Patch:
-------------------
~ running ./thuge-gen
~ ~ WARNING: shmmax is too small to run this test.
~ ~ Please run the following command to increase shmmax:
~ ~ echo 262144 > /proc/sys/kernel/shmmax
~ 1..0 ~ SKIP Test skipped due to insufficient shmmax value.
~ [SKIP]
ok 29 thuge-gen ~ SKIP
Link: https://lkml.kernel.org/r/20250816040113.760010-7-aboorvad@linux.ibm.com
Co-developed-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In ksm_functional_tests, test_child_ksm() returned negative values to
indicate errors. However, when passed to exit(), these were interpreted
as large unsigned values (e.g, -2 became 254), leading to incorrect
handling in the parent process. As a result, some tests appeared to be
skipped or silently failed.
This patch changes test_child_ksm() to return positive error codes (1, 2,
3) and updates test_child_ksm_err() to interpret them correctly.
Additionally, test_prctl_fork_exec() now uses exit(4) after a failed
execv() to clearly signal exec failures. This ensures the parent
accurately detects and reports child process failures.
--------------
Before patch:
--------------
- [RUN] test_unmerge
ok 1 Pages were unmerged
...
- [RUN] test_prctl_fork
- No pages got merged
- [RUN] test_prctl_fork_exec
ok 7 PR_SET_MEMORY_MERGE value is inherited
...
Bail out! 1 out of 8 tests failed
- Planned tests != run tests (9 != 8)
- Totals: pass:7 fail:1 xfail:0 xpass:0 skip:0 error:0
--------------
After patch:
--------------
- [RUN] test_unmerge
ok 1 Pages were unmerged
...
- [RUN] test_prctl_fork
- No pages got merged
not ok 7 Merge in child failed
- [RUN] test_prctl_fork_exec
ok 8 PR_SET_MEMORY_MERGE value is inherited
...
Bail out! 2 out of 9 tests failed
- Totals: pass:7 fail:2 xfail:0 xpass:0 skip:0 error:0
Link: https://lkml.kernel.org/r/20250816040113.760010-6-aboorvad@linux.ibm.com
Fixes: 6c47de3be3 ("selftest/mm: ksm_functional_tests: extend test case for ksm fork/exec")
Co-developed-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The split_huge_page_test fails on systems with a 64KB base page size.
This is because the order of a 2MB huge page is different:
On 64KB systems, the order is 5.
On 4KB systems, it's 9.
The test currently assumes a maximum huge page order of 9, which is only
valid for 4KB base page systems. On systems with 64KB pages, attempting
to split huge pages beyond their actual order (5) causes the test to fail.
In this patch, we calculate the huge page order based on the system's base
page size. With this change, the tests now run successfully on both 64KB
and 4KB page size systems.
Link: https://lkml.kernel.org/r/20250816040113.760010-5-aboorvad@linux.ibm.com
Fixes: fa6c02315f ("mm: huge_memory: a new debugfs interface for splitting THP tests")
Co-developed-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch fixes 2 issues.
1) After fork() in test_prctl_fork, the child process uses the file
descriptors from the parent process to read ksm_stat and
ksm_merging_pages. This results in incorrect values being read (parent
process ksm_stat and ksm_merging_pages will be read in child), causing
the test to fail.
This patch calls init_global_file_handles() in the child process to
ensure that the current process's file descriptors are used to read
ksm_stat and ksm_merging_pages.
2) All tests currently call ksm_merge to trigger page merging. To
ensure the system remains in a consistent state for subsequent tests,
it is better to call ksm_unmerge during the test cleanup phase
In the test_prctl_fork test, after a fork(), reading
ksm_merging_pages in the child process returns a non-zero value because
a previous test performed a merge, and the child's memory state is
inherited from the parent.
Although the child process calls ksm_unmerge, the ksm_merging_pages
counter in the parent is reset to zero, while the child's counter
remains unchanged. This discrepancy causes the test to fail.
To avoid this issue, each test should call ksm_unmerge during
cleanup to ensure the counter is reset and the system is in a clean
state for subsequent tests.
execv argument is an array of pointers to null-terminated strings. In
this patch we also added NULL in the execv argument.
Link: https://lkml.kernel.org/r/20250816040113.760010-4-aboorvad@linux.ibm.com
Fixes: 6c47de3be3 ("selftest/mm: ksm_functional_tests: extend test case for ksm fork/exec")
Co-developed-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
PowerPC64 supports a 4PB virtual address space, but this test was
previously limited to 512TB. This patch extends the coverage up to the
full 4PB VA range on PowerPC64.
Memory from 0 to 128TB is allocated without an address hint, while
allocations from 128TB to 4PB use a hint address.
Link: https://lkml.kernel.org/r/20250816040113.760010-3-aboorvad@linux.ibm.com
Co-developed-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/mm: Fix false positives and skip unsupported
tests", v4.
This patch series addresses false positives in the generic mm selftests
and skips tests that cannot run correctly due to missing features or
system limitations.
This patch (of 7):
In main(), the high address is stored in hptr, but for mark_range(), the
address passed is ptr, not hptr. Fixed this by changing ptr[i] to hptr[i]
in mark_range() function call.
Link: https://lkml.kernel.org/r/20250816040113.760010-1-aboorvad@linux.ibm.com
Link: https://lkml.kernel.org/r/20250816040113.760010-2-aboorvad@linux.ibm.com
Fixes: b2a79f6213 ("selftests/mm: virtual_address_range: unmap chunks after validation")
Co-developed-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since the time.h header file is not actually needed in this code, we can
safely remove its inclusion.
Link: https://lkml.kernel.org/r/20250814125417.659937-1-lienze@kylinos.cn
Signed-off-by: Enze Li <lienze@kylinos.cn>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
_common.sh was recently introduced but is not installed and then triggers
an error when trying to run the damon selftests:
selftests: damon: sysfs.sh
./sysfs.sh: line 4: _common.sh: No such file or directory
Install this file to avoid this error.
Link: https://lkml.kernel.org/r/20250812-alex-fixes_manual-v1-1-c4e99b1f80e4@rivosinc.com
Fixes: 511914506d ("selftests/damon: introduce _common.sh to host shared function")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Tested-by: Enze Li <lienze@kylinos.cn>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are spelling mistakes in perror messages. Fix these.
Link: https://lkml.kernel.org/r/20250813081333.1978096-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now we have updated all users of mm->flags to use the bitmap accessors,
repalce it with the bitmap version entirely.
We are then able to move to having 64 bits of mm->flags on both 32-bit and
64-bit architectures.
We also update the VMA userland tests to ensure that everything remains
functional there.
No functional changes intended, other than there now being 64 bits of
available mm_struct flags.
Link: https://lkml.kernel.org/r/e1f6654e016d36c43959764b01355736c5cbcdf8.1755012943.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Namhyung kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently it hard codes the number of hugepage to check for
check_huge_anon(), but it would be more reasonable to do the check based
on a number passed in.
Pass in the hugepage number and do the check based on it.
Link: https://lkml.kernel.org/r/20250809194209.30484-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: wang lian <lianux.mm@gmail.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use nolibc include directory rather than include a cumulative nolibc.h on
the compiler command line and replace use of 'sudo cpio' with
usr/gen_init_cpio.
While on it fix spelling of KHO_FINALIZE
Link: https://lkml.kernel.org/r/20250811082510.4154080-4-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Changyuan Lyu <changyuanl@google.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
... and hide it behind a kconfig option. There is really no need for any
!xen code to perform this check.
The naming is a bit off: we want to find the "normal" page when a PTE was
marked "special". So it's really not "finding a special" page.
Improve the documentation, and add a comment in the code where XEN ends up
performing the pte_mkspecial() through a hypercall. More details can be
found in commit 923b2919e2 ("xen/gntdev: mark userspace PTEs as special
on x86 PV guests").
Link: https://lkml.kernel.org/r/20250811112631.759341-12-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Juegren Gross <jgross@suse.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series " execute PROCMAP_QUERY ioctl under per-vma lock", v4.
With /proc/pid/maps now being read under per-vma lock protection we can
reuse parts of that code to execute PROCMAP_QUERY ioctl also without
taking mmap_lock. The change is designed to reduce mmap_lock contention
and prevent PROCMAP_QUERY ioctl calls from blocking address space updates.
This patchset was split out of the original patchset [1] that introduced
per-vma lock usage for /proc/pid/maps reading. It contains PROCMAP_QUERY
tests, code refactoring patch to simplify the main change and the actual
transition to per-vma lock.
This patch (of 3):
Extend /proc/pid/maps tearing tests to verify PROCMAP_QUERY ioctl operation
correctness while the vma is being concurrently modified.
Link: https://lkml.kernel.org/r/20250808152850.2580887-1-surenb@google.com
Link: https://lkml.kernel.org/r/20250808152850.2580887-2-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: SeongJae Park <sj@kernel.org>
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: T.J. Mercier <tjmercier@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Ye Bin <yebin10@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace typeof() with __auto_type in the swap() macro in uffd-stress.c.
__auto_type was introduced in GCC 4.9 and reduces the compile time for all
compilers. No functional changes intended.
Link: https://lkml.kernel.org/r/20250730142301.6754-1-pranav.tyagi03@gmail.com
Signed-off-by: Pranav Tyagi <pranav.tyagi03@gmail.com>
Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Enable these tests to be run on other pfnmap'ed memory like NVIDIA's EGM.
Add '--' as a separator to pass in file path. This allows passing of cmd
line arguments to kselftest_harness. Use '/dev/mem' as default filename.
Existing test passes:
pfnmap
TAP version 13
1..6
# Starting 6 tests from 1 test cases.
# PASSED: 6 / 6 tests passed.
# Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0
Pass params to kselftest_harness:
pfnmap -r pfnmap:mremap_fixed
TAP version 13
1..1
# Starting 1 tests from 1 test cases.
# RUN pfnmap.mremap_fixed ...
# OK pfnmap.mremap_fixed
ok 1 pfnmap.mremap_fixed
# PASSED: 1 / 1 tests passed.
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
Pass non-existent file name as input:
pfnmap -- /dev/blah
TAP version 13
1..6
# Starting 6 tests from 1 test cases.
# RUN pfnmap.madvise_disallowed ...
# SKIP Cannot open '/dev/blah'
Pass non pfnmap'ed file as input:
pfnmap -r pfnmap.madvise_disallowed -- randfile.txt
TAP version 13
1..1
# Starting 1 tests from 1 test cases.
# RUN pfnmap.madvise_disallowed ...
# SKIP Invalid file: 'randfile.txt'. Not pfnmap'ed
Link: https://lkml.kernel.org/r/20250805013629.47629-1-sudarsanm@google.com
Signed-off-by: Sudarsan Mahendran <sudarsanm@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add "extern" to the glibc-defined weak rseq symbols to convert the rseq
selftest's usage from weak symbol definitions to weak symbol _references_.
Effectively re-defining the glibc symbols wreaks havoc when building with
-fno-common, e.g. generates segfaults when running multi-threaded programs,
as dynamically linked applications end up with multiple versions of the
symbols.
Building with -fcommon, which until recently has the been the default for
GCC and clang, papers over the bug by allowing the linker to resolve the
weak/tentative definition to glibc's "real" definition.
Note, the symbol itself (or rather its address), not the value of the
symbol, is set to 0/NULL for unresolved weak symbol references, as the
symbol doesn't exist and thus can't have a value. Check for a NULL rseq
size pointer to handle the scenario where the test is statically linked
against a libc that doesn't support rseq in any capacity.
Fixes: 3bcbc20942 ("selftests/rseq: Play nice with binaries statically linked against glibc 2.35+")
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/87frdoybk4.ffs@tglx
Add new IIO modifiers to support power and energy measurement devices:
Power modifiers:
- IIO_MOD_ACTIVE: Real power consumed by the load
- IIO_MOD_REACTIVE: Power that oscillates between source and load
- IIO_MOD_APPARENT: Magnitude of complex power
Signal quality modifiers:
- IIO_MOD_RMS: Root Mean Square value
Additionally adds:
- IIO_CHAN_INFO_POWERFACTOR: Power factor channel info type for
representing the ratio of active power to apparent power
These modifiers enable proper representation of power measurement
devices like energy meters and power analyzers.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for IIO_ALTCURRENT channel type to distinguish AC current
measurements from DC current measurements. This follows the same pattern
as IIO_VOLTAGE and IIO_ALTVOLTAGE.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When "perf lock con" is run in a live mode, with no data file, a host
environment must be provided. Testing missed this as a failing assert
was creating the 1 line of expected stderr output.
$ sudo perf lock con -ab true
perf: util/session.c:195: __perf_session__new: Assertion `host_env != NULL' failed.
Aborted
Fixes: 525a599bad ("perf env: Remove global perf_env")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When cross-compiling the perf tool for ARM64, `perf help` may crash
with the following assertion failure:
help.c:122: exclude_cmds: Assertion `cmds->names[ci] == NULL' failed.
This happens when the perf binary is not named exactly "perf" or when
multiple "perf-*" binaries exist in the same directory. In such cases,
the `excludes` command list can be empty, which leads to the final
assertion in exclude_cmds() being triggered.
Add a simple guard at the beginning of exclude_cmds() to return early
if excludes->cnt is zero, preventing the crash.
Signed-off-by: hupu <hupu.gm@gmail.com>
Reported-by: Guilherme Amadio <amadio@gentoo.org>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250909094953.106706-1-amadio@gentoo.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----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=FXmW
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter: updates for net-next
1) Don't respond to ICMP_UNREACH errors with another ICMP_UNREACH
error.
2) Support fetching the current bridge ethernet address.
This allows a more flexible approach to packet redirection
on bridges without need to use hardcoded addresses. From
Fernando Fernandez Mancera.
3) Zap a few no-longer needed conditionals from ipvs packet path
and convert to READ/WRITE_ONCE to avoid KCSAN warnings.
From Zhang Tengfei.
4) Remove a no-longer-used macro argument in ipset, from Zhen Ni.
* tag 'nf-next-25-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_reject: don't reply to icmp error messages
ipvs: Use READ_ONCE/WRITE_ONCE for ipvs->enable
netfilter: nft_meta_bridge: introduce NFT_META_BRI_IIFHWADDR support
netfilter: ipset: Remove unused htable_bits in macro ahash_region
selftest:net: fixed spelling mistakes
====================
Link: https://patch.msgid.link/20250911143819.14753-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function parse_events__sort_events_and_fix_groups is needed to fix
uncore events like:
```
$ perf stat -e '{data_read,data_write}' ...
```
so that the multiple uncore PMUs have a group each of data_read and
data_write events.
The same function will perform architecture sorting and group fixing,
in particular for Intel topdown/perf-metric events. Grouping multiple
perf metric events together causes perf_event_open to fail as the
group can only support one. This means command lines like:
```
$ perf stat -e 'slots,slots' ...
```
fail as the slots events are forced into a group together to try to
satisfy the perf-metric event constraints.
As the user may know better than
parse_events__sort_events_and_fix_groups add a 'X' modifier to skip
its regrouping behavior. This allows the following to succeed rather
than fail on the second slots event being opened:
```
$ perf stat -e 'slots,slots:X' -a sleep 1
Performance counter stats for 'system wide':
6,834,154,071 cpu_core/slots/ (50.13%)
5,548,629,453 cpu_core/slots/X (49.87%)
1.002634606 seconds time elapsed
```
Closes: https://lore.kernel.org/lkml/20250822082233.1850417-1-dapeng1.mi@linux.intel.com/
Reported-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Reported-by: Xudong Hao <xudong.hao@intel.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass errno to stat_handle_error() rather than reading errno after it has
potentially been clobbered.
Move "skippable" handling first as a skippable event (from the perf stat
default list) should always just be skipped.
Remove logic to skip rather than fail events in a group when they
aren't the group leader.
The original logic was added in commit cb5ef60067 ("perf stat: Error
out unsupported group leader immediately") due to error handling and
opening being together and an assertion being raised.
Not failing this case causes broken groups to not report values,
particularly for topdown events.
Closes: https://lore.kernel.org/lkml/20250822082233.1850417-1-dapeng1.mi@linux.intel.com/
Reported-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend arch_evsel__open_strerror() from just AMD IBS events to Intel
core PMU events, to give a message when a slots event isn't a group
leader or when a perf metric event is duplicated within an event
group.
As generating the warning happens after non-arch specific warnings are
generated, disable the missing system wide (-a) flag warning for the
core PMU.
This assumes core PMU events should support per-thread/process and
system-wide.
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The lzma_is_compressed and gzip_is_compressed functions are declared
to return a "bool" type, but in case of an error (e.g., file open
failure), they incorrectly returned -1.
A bool type is a boolean value that is either true or false.
Returning -1 for a bool return type can lead to unexpected behavior
and may violate strict type-checking in some compilers.
Fix the return value to be false in error cases, ensuring the function
adheres to its declared return type improves for preventing potential
bugs related to type mismatch.
Fixes: 4b57fd44b6 ("perf tools: Add lzma_is_compressed function")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yunseong Kim <ysk@kzalloc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Link: https://lore.kernel.org/r/20250822162506.316844-3-ysk@kzalloc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update perf util arm64_exception_types.h to match the exception class
macros defined in tools/arch/arm64/include/asm/esr.h.
This ensures consistency between perf tooling and the kernel header
definitions for ESR_ELx_EC_* values.
In v2, ESR_ELx_EC_OTHER and ESR_ELx_EC_GCS, which were missing in v1, were
included.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Yunseong Kim <ysk@kzalloc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Levi Yun <yeoreum.yun@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250822145855.53071-2-ysk@kzalloc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix file descriptor leak when callback function returns error. The
function was directly returning without closing fdinfo_dir_fd and
fd_dir when cb() returned non-zero value.
Fixes: 28917cb17f ("perf drm_pmu: Add a tool like PMU to expose DRM information")
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Markus Elfring <Markus.Elfring@web.de>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: GuoHan Zhao <zhaoguohan@kylinos.cn>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250908065203.22187-1-zhaoguohan@kylinos.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 21b8732eb4 ("perf tools: Allow overriding MAX_NR_CPUS at
compile time") added the capability to override MAX_NR_CPUS. At
that time it was necessary to reduce the huge amount of RAM used
by static stats variables.
But this has been unnecessary since commit 6a1e2c5c26 ("perf stat:
Remove a set of shadow stats static variables"), and
commit e8399d34d5 ("libperf cpumap: Hide/reduce scope of
MAX_NR_CPUS") broke the build in that case because it failed to
add the guard around the new definition of MAX_NR_CPUS.
So cleanup things and remove guards completely to officialise it
is not necessary anymore to override MAX_NR_CPUS.
Fixes: e8399d34d5 ("libperf cpumap: Hide/reduce scope of MAX_NR_CPUS")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/all/8c8553387ebf904a9e5a93eaf643cb01164d9fb3.1736188471.git.christophe.leroy@csgroup.eu/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Usually the autodefer helpers in lib.sh are expected to be run in context
where success is the expected outcome. However when using them for feature
detection, failure can legitimately occur. But the failed command still
schedules a cleanup, which will likely fail again.
Instead, only schedule deferred cleanup when the positive command succeeds.
This way of organizing the cleanup has the added benefit that now the
return code from these functions reflects whether the command passed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/af10a5bb82ea11ead978cf903550089e006d7e70.1757004393.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fact that all cleanup (ideally) goes through the defer framework makes
debugging of these commands a bit tricky. However, this also gives us a
nice point to place a hook along the lines of PAUSE_ON_FAIL. When the
environment variable DEFER_PAUSE_ON_FAIL is set, and a cleanup command
results in non-zero exit status, show a bit of debuginfo and give the user
an opportunity to interrupt the execution altogether.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/2a07d24568ede6c42e4701657fa0b738e490fe59.1757004393.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the way deferred commands are stored and invoked causes any
whitespace to act as an argument separator when the command is executed.
To make it possible to use spaces in deferred commands, store the commands
quoted, and then eval the string prior to execution.
Fixes: a6e263f125 ("selftests: net: lib: Introduce deferred commands")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/6c2523139a6f99103889c9c9fedcdc66a75441f4.1757004393.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is required on recent kernels, where it is now off by default.
While we're here, fix some stray =m's that were supposed to be =y.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20250910013644.4153708-5-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's no longer user-selectable (and the default was already "y"), so
let's just drop it.
It was never really relevant to the wireguard selftests either way.
Cc: Shuah Khan <shuah@kernel.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20250910013644.4153708-4-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Constrained test environment; duplicate address detection is not needed
and causes races so disable it.
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250910025828.38900-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.17-rc6).
Conflicts:
net/netfilter/nft_set_pipapo.c
net/netfilter/nft_set_pipapo_avx2.c
c4eaca2e10 ("netfilter: nft_set_pipapo: don't check genbit from packetpath lookups")
84c1da7b38 ("netfilter: nft_set_pipapo: use avx2 algorithm for insertions too")
Only trivial adjacent changes (in a doc and a Makefile).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the KMSAN DMA handling function from page-based to physical
address-based interface.
The refactoring renames kmsan_handle_dma() parameters from accepting
(struct page *page, size_t offset, size_t size) to (phys_addr_t phys,
size_t size). The existing semantics where callers are expected to
provide only kmap memory is continued here.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/3557cbaf66e935bc794f37d2b891ef75cbf2c80c.1757423202.git.leonro@nvidia.com
Add selftests for testing the reporting of arena page faults through BPF
streams. Two new bpf programs are added that read and write to an
unmapped arena address and the fault reporting is verified in the
userspace through streams.
The added bpf programs need to access the user_vm_start in struct
bpf_arena, this is done by casting &arena to struct bpf_arena *, but
barrier_var() is used on this ptr before accessing ptr->user_vm_start;
to stop GCC from issuing an out-of-bound access due to the cast from
smaller map struct to larger "struct bpf_arena"
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250911145808.58042-7-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Start using __stderr directly in the bpf programs to test the reporting
of may_goto timeout detection and spin_lock dead lock detection.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250911145808.58042-6-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add __stderr and __stdout to validate the output of BPF streams for bpf
selftests. Similar to __xlated, __jited, etc., __stderr/out can be used
in the BPF progs to compare a string (regex supported) to the output in
the bpf streams.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250911145808.58042-5-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
arm32 KVM was removed in commit 541ad0150c ("arm: Remove 32bit KVM
host support").
None of the kvm selftests are compiled for arm32 and it's not indirectly
included from anywhere either, so delete it.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250910-james-tools-header-cleanup-v1-2-7ae4bedc99e0@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These have been unused since commit 162607ea20 ("perf kvm/{x86,s390}:
Remove dependency on uapi/kvm_perf.h") in favour of dynamic discovery.
Remove the unused headers to reduce consistency checking overhead and
noise.
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250910-james-tools-header-cleanup-v1-1-7ae4bedc99e0@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend the fastops test coverage to DIV and IDIV, specifically to provide
coverage for #DE (divide error) exceptions, as #DE is the only exception
that can occur in KVM's fastops path, i.e. that requires exception fixup.
Link: https://lore.kernel.org/r/20250909202835.333554-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a fastop() macro along with macros to define its required constraints,
and use the macros to dedup the innermost guts of the fastop testcases.
No functional change intended.
Link: https://lore.kernel.org/r/20250909202835.333554-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend the fastops test to cover instructions that operate on 8-bit data.
Support for 8-bit instructions was omitted from the original commit purely
due to complications with BT not having a r/m8 variant. To keep the
RFLAGS.CF behavior deterministic and not heavily biased to '0' or '1',
continue using BT, but cast and load the to-be-tested value into a
dedicated 32-bit constraint.
Supporting 8-bit operations will allow using guest_test_fastops() as-is to
provide full coverage for DIV and IDIV. For divide operations, covering
all operand sizes _is_ interesting, because KVM needs provide exception
fixup for each size (failure to handle a #DE could panic the host).
Link: https://lore.kernel.org/all/aIF7ZhWZxlkcpm4y@google.com
Link: https://lore.kernel.org/r/20250909202835.333554-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add support for handling #DE (divide error) exceptions in KVM selftests
so that the fastops test can verify KVM correctly handles #DE when
emulating DIV or IDIV on behalf of the guest. Morph #DE to 0xff (i.e.
to -1) as a mostly-arbitrary vector to indicate #DE, so that '0' (the
real #DE vector) can still be used to indicate "no exception".
Link: https://lore.kernel.org/r/20250909202835.333554-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
We have an IPv6 routing regression with the relevant fix still
a WiP. This v2 includes a last-minute revert to avoid more
problems.
Current release - new code bugs:
- wifi: nl80211: completely disable per-link stats for now
Previous releases - regressions:
- dev_ioctl: take ops lock in hwtstamp lower paths
- netfilter:
- fix spurious set lookup failures
- fix lockdep splat due to missing annotation
- genetlink: fix genl_bind() invoking bind() after -EPERM
- phy: transfer phy_config_inband() locking responsibility to phylink
- can: xilinx_can: fix use-after-free of transmitted SKB
- hsr: fix lock warnings
- eth: igb: fix NULL pointer dereference in ethtool loopback test
- eth: i40e: fix Jumbo Frame support after iPXE boot
- eth: macsec: sync features on RTM_NEWLINK
Previous releases - always broken:
- tunnels: reset the GSO metadata before reusing the skb
- mptcp: make sync_socket_options propagate SOCK_KEEPOPEN
- can: j1939: implement NETDEV_UNREGISTER notification hanidler
- wifi: ath12k: fix WMI TLV header misalignment
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=XjZM
-----END PGP SIGNATURE-----
Merge tag 'net-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN, netfilter and wireless.
We have an IPv6 routing regression with the relevant fix still a WiP.
This includes a last-minute revert to avoid more problems.
Current release - new code bugs:
- wifi: nl80211: completely disable per-link stats for now
Previous releases - regressions:
- dev_ioctl: take ops lock in hwtstamp lower paths
- netfilter:
- fix spurious set lookup failures
- fix lockdep splat due to missing annotation
- genetlink: fix genl_bind() invoking bind() after -EPERM
- phy: transfer phy_config_inband() locking responsibility to phylink
- can: xilinx_can: fix use-after-free of transmitted SKB
- hsr: fix lock warnings
- eth:
- igb: fix NULL pointer dereference in ethtool loopback test
- i40e: fix Jumbo Frame support after iPXE boot
- macsec: sync features on RTM_NEWLINK
Previous releases - always broken:
- tunnels: reset the GSO metadata before reusing the skb
- mptcp: make sync_socket_options propagate SOCK_KEEPOPEN
- can: j1939: implement NETDEV_UNREGISTER notification hanidler
- wifi: ath12k: fix WMI TLV header misalignment"
* tag 'net-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
Revert "net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups"
hsr: hold rcu and dev lock for hsr_get_port_ndev
hsr: use hsr_for_each_port_rtnl in hsr_port_get_hsr
hsr: use rtnl lock when iterating over ports
wifi: nl80211: completely disable per-link stats for now
net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups
net: ethtool: fix wrong type used in struct kernel_ethtool_ts_info
MAINTAINERS: add Phil as netfilter reviewer
netfilter: nf_tables: restart set lookup on base_seq change
netfilter: nf_tables: make nft_set_do_lookup available unconditionally
netfilter: nf_tables: place base_seq in struct net
netfilter: nft_set_rbtree: continue traversal if element is inactive
netfilter: nft_set_pipapo: don't check genbit from packetpath lookups
netfilter: nft_set_bitmap: fix lockdep splat due to missing annotation
can: rcar_can: rcar_can_resume(): fix s2ram with PSCI
can: xilinx_can: xcan_write_frame(): fix use-after-free of transmitted SKB
can: j1939: j1939_local_ecu_get(): undo increment when j1939_local_ecu_get() fails
can: j1939: j1939_sk_bind(): call j1939_priv_put() immediately when j1939_local_ecu_get() failed
can: j1939: implement NETDEV_UNREGISTER notification handler
selftests: can: enable CONFIG_CAN_VCAN as a module
...
-----BEGIN PGP SIGNATURE-----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=09/9
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
"A number of fixes accumulated due to summer vacations
- Fix out-of-bounds dynptr write in bpf_crypto_crypt() kfunc which
was misidentified as a security issue (Daniel Borkmann)
- Update the list of BPF selftests maintainers (Eduard Zingerman)
- Fix selftests warnings with icecc compiler (Ilya Leoshkevich)
- Disable XDP/cpumap direct return optimization (Jesper Dangaard
Brouer)
- Fix unexpected get_helper_proto() result in unusual configuration
BPF_SYSCALL=y and BPF_EVENTS=n (Jiri Olsa)
- Allow fallback to interpreter when JIT support is limited (KaFai
Wan)
- Fix rqspinlock and choose trylock fallback for NMI waiters. Pick
the simplest fix. More involved fix is targeted bpf-next (Kumar
Kartikeya Dwivedi)
- Fix cleanup when tcp_bpf_send_verdict() fails to allocate
psock->cork (Kuniyuki Iwashima)
- Disallow bpf_timer in PREEMPT_RT for now. Proper solution is being
discussed for bpf-next. (Leon Hwang)
- Fix XSK cq descriptor production (Maciej Fijalkowski)
- Tell memcg to use allow_spinning=false path in bpf_timer_init() to
avoid lockup in cgroup_file_notify() (Peilin Ye)
- Fix bpf_strnstr() to handle suffix match cases (Rong Tao)"
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Skip timer cases when bpf_timer is not supported
bpf: Reject bpf_timer for PREEMPT_RT
tcp_bpf: Call sk_msg_free() when tcp_bpf_send_verdict() fails to allocate psock->cork.
bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init()
bpf: Allow fall back to interpreter for programs with stack size <= 512
rqspinlock: Choose trylock fallback for NMI waiters
xsk: Fix immature cq descriptor production
bpf: Update the list of BPF selftests maintainers
selftests/bpf: Add tests for bpf_strnstr
selftests/bpf: Fix "expression result unused" warnings with icecc
bpf: Fix bpf_strnstr() to handle suffix match cases better
selftests/bpf: Extend crypto_sanity selftest with invalid dst buffer
bpf: Fix out-of-bounds dynptr write in bpf_crypto_crypt
bpf: Check the helper function is valid in get_helper_proto
bpf, cpumap: Disable page_pool direct xdp_return need larger scope
Create versions of the existing test cases where the routers generating
the ICMP error messages are using VRFs. Check that the source IPs of
these messages do not change in the presence of VRFs.
IPv6 always behaved correctly, but IPv4 fails when reverting "ipv4:
icmp: Fix source IP derivation in presence of VRFs".
Without IPv4 change:
# ./traceroute.sh
TEST: IPv6 traceroute [ OK ]
TEST: IPv6 traceroute with VRF [ OK ]
TEST: IPv4 traceroute [ OK ]
TEST: IPv4 traceroute with VRF [FAIL]
traceroute did not return 1.0.3.1
$ echo $?
1
The test fails because the ICMP error message is sent with the VRF
device's IP (1.0.4.1):
# traceroute -n -s 1.0.1.3 1.0.2.4
traceroute to 1.0.2.4 (1.0.2.4), 30 hops max, 60 byte packets
1 1.0.4.1 0.165 ms 0.110 ms 0.103 ms
2 1.0.2.4 0.098 ms 0.085 ms 0.078 ms
# traceroute -n -s 1.0.3.3 1.0.2.4
traceroute to 1.0.2.4 (1.0.2.4), 30 hops max, 60 byte packets
1 1.0.4.1 0.201 ms 0.138 ms 0.129 ms
2 1.0.2.4 0.123 ms 0.105 ms 0.098 ms
With IPv4 change:
# ./traceroute.sh
TEST: IPv6 traceroute [ OK ]
TEST: IPv6 traceroute with VRF [ OK ]
TEST: IPv4 traceroute [ OK ]
TEST: IPv4 traceroute with VRF [ OK ]
$ echo $?
0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-9-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When generating ICMP error messages, the kernel will prefer a source IP
that is on the same subnet as the destination IP (see
inet_select_addr()). Test this behavior by invoking traceroute with
different source IPs and checking that the ICMP error message is
generated with a source IP in the same subnet.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-8-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Both of the addresses are configured as primary addresses, but the
kernel is expected to choose 10.0.1.1/24 as the source IP of the ICMP
error message since it is on the same subnet as the destination IP of
the message (10.0.1.3/24). Reword the comment to reflect that.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-7-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use require_command() so that the test will return SKIP (4) when a
required command is not present.
Before:
# ./traceroute.sh
SKIP: Could not run IPV6 test without traceroute6
SKIP: Could not run IPV4 test without traceroute
$ echo $?
0
After:
# ./traceroute.sh
TEST: traceroute6 not installed [SKIP]
$ echo $?
4
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-6-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The test always returns success even if some tests were modified to
fail. Fix by converting the test to use the appropriate library
functions instead of using its own functions.
Before:
# ./traceroute.sh
TEST: IPV6 traceroute [FAIL]
TEST: IPV4 traceroute [ OK ]
Tests passed: 1
Tests failed: 1
$ echo $?
0
After:
# ./traceroute.sh
TEST: IPv6 traceroute [FAIL]
traceroute6 did not return 2000:102::2
TEST: IPv4 traceroute [ OK ]
$ echo $?
1
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-5-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are currently no kernel tests that verify setting and getting
options of the team driver.
In the future, options may be added that implicitly change other
options, which will make it useful to have tests like these that show
nothing breaks. There will be a follow up patch to this that adds new
"rx_enabled" and "tx_enabled" options, which will implicitly affect the
"enabled" option value and vice versa.
The tests use teamnl to first set options to specific values and then
gets them to compare to the set values.
Signed-off-by: Marc Harvey <marcharvey@google.com>
Link: https://patch.msgid.link/20250905040441.2679296-1-marcharvey@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmjBpO8THG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnJOOB/9r35uZBD1+ZZVpvoByhil8XY7K42Vv
LrARJ8+kh1Q6mcuB4V/176GBPJ7JabSUTGqvqvYbJBAB5obONhLU5Bkb/7lM2z1G
MOUe0DMiBP+J3K8zqXcEKhqeW0qQO6pqfnv8iIj97Kxwd5JRPJq8pMpCIC/RLzOY
Ot7+fcsE+cSZt9VumnQTx/S1fzGoY1C9VCglSr9B0O6IiTZZBIPNg8EwIGvbm7oh
uofnFRocRZaWQ6OErdRSTLK4hu11DeFUmEAA6YN2ikpAdshUsf3U8HYaz2LIEEuu
zGflFXrMekXqDod1SvhklLPUY/ssC11dUon+4Cgz/yK6I+lFvD/cuLIP
=/YxL
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.17-20250910' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-09-10
The 1st patch is by Alex Tran and fixes the Documentation of the
struct bcm_msg_head.
Davide Caratti's patch enabled the VCAN driver as a module for the
Linux self tests.
Tetsuo Handa contributes 3 patches that fix various problems in the
CAN j1939 protocol.
Anssi Hannula's patch fixes a potential use-after-free in the
xilinx_can driver.
Geert Uytterhoeven's patch fixes the rcan_can's suspend to RAM on
R-Car Gen3 using PSCI.
* tag 'linux-can-fixes-for-6.17-20250910' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: rcar_can: rcar_can_resume(): fix s2ram with PSCI
can: xilinx_can: xcan_write_frame(): fix use-after-free of transmitted SKB
can: j1939: j1939_local_ecu_get(): undo increment when j1939_local_ecu_get() fails
can: j1939: j1939_sk_bind(): call j1939_priv_put() immediately when j1939_local_ecu_get() failed
can: j1939: implement NETDEV_UNREGISTER notification handler
selftests: can: enable CONFIG_CAN_VCAN as a module
docs: networking: can: change bcm_msg_head frames member to support flexible array
====================
Link: https://patch.msgid.link/20250910162907.948454-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fcnal-test.sh already includes lib.sh, use relevant helpers
instead of sleeping. Replace sleep after starting nettest
as a server with wait_local_port_listen.
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250909223837.863217-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is better to use 'not in' instead of 'not {element} in {collection}'
according to Ruff.
This is linked to Ruff error E713 [1]:
Testing membership with {element} not in {collection} is more readable.
Link: https://docs.astral.sh/ruff/rules/not-in-test/ [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20250909-net-next-ynl-ruff-v1-8-238c2bccdd99@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is better to use the 'is' keyword instead of comparing to None
according to Ruff.
This is linked to Ruff error E711 [1]:
According to PEP 8, "Comparisons to singletons like None should always
be done with is or is not, never the equality operators."
Link: https://docs.astral.sh/ruff/rules/none-comparison/ [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20250909-net-next-ynl-ruff-v1-7-238c2bccdd99@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These semicolons are not required according to Ruff. Simply remove them.
This is linked to Ruff error E703 [1]:
A trailing semicolon is unnecessary and should be removed.
Link: https://docs.astral.sh/ruff/rules/useless-semicolon/ [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20250909-net-next-ynl-ruff-v1-6-238c2bccdd99@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These imports are not used according to Ruff, and can be safely removed.
This is linked to Ruff error F401 [1]:
Unused imports add a performance overhead at runtime, and risk
creating import cycles. They also increase the cognitive load of
reading the code.
There is one exception with 'YnlDocGenerator' which is added in __all__:
it is used by ynl_gen_rst.py.
Link: https://docs.astral.sh/ruff/rules/unused-import/ [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20250909-net-next-ynl-ruff-v1-5-238c2bccdd99@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'f-strings' without any placeholders don't need to be marked as such
according to Ruff. This 'f' can be safely removed.
This is linked to Ruff error F541 [1]:
f-strings are a convenient way to format strings, but they are not
necessary if there are no placeholder expressions to format. In this
case, a regular string should be used instead, as an f-string without
placeholders can be confusing for readers, who may expect such a
placeholder to be present.
Link: https://docs.astral.sh/ruff/rules/f-string-missing-placeholders/ [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20250909-net-next-ynl-ruff-v1-4-238c2bccdd99@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These variables are assigned but never used according to Ruff. They can
then be safely removed.
This is linked to Ruff error F841 [1]:
A variable that is defined but not used is likely a mistake, and
should be removed to avoid confusion.
Link: https://docs.astral.sh/ruff/rules/unused-variable/ [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20250909-net-next-ynl-ruff-v1-3-238c2bccdd99@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This 'except' was used without specifying the exception class according
to Ruff. Here, only the ValueError class is expected and handled.
This is linked to Ruff error E722 [1]:
A bare except catches BaseException which includes KeyboardInterrupt,
SystemExit, Exception, and others. Catching BaseException can make it
hard to interrupt the program (e.g., with Ctrl-C) and can disguise
other problems.
Link: https://docs.astral.sh/ruff/rules/bare-except/ [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20250909-net-next-ynl-ruff-v1-2-238c2bccdd99@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This variable used in the error path was not defined according to Ruff.
msg_format.attr_set is used instead, presumably the one that was
supposed to be used originally.
This is linked to Ruff error F821 [1]:
An undefined name is likely to raise NameError at runtime.
Fixes: 1769e2be4b ("tools/net/ynl: Add 'sub-message' attribute decoding to ynl")
Link: https://docs.astral.sh/ruff/rules/undefined-name/ [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20250909-net-next-ynl-ruff-v1-1-238c2bccdd99@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A proper kernel configuration for running kselftest can be obtained with:
$ yes | make kselftest-merge
Build of 'vcan' driver is currently missing, while the other required knobs
are already there because of net/link_netns.py [1]. Add a config file in
selftests/net/can to store the minimum set of kconfig needed for CAN
selftests.
[1] https://patch.msgid.link/20250219125039.18024-14-shaw.leon@gmail.com
Fixes: 77442ffa83 ("selftests: can: Import tst-filter from can-tests")
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/fa4c0ea262ec529f25e5f5aa9269d84764c67321.1757516009.git.dcaratti@redhat.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
ACPICA commit 710745713ad3a2543dbfb70e84764f31f0e46bdc
This has been renamed in more recent CXL specs, as
type3 (memory expanders) can also use HDM-DB for
device coherent memory.
Link: 710745713a
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20250908160034.86471-1-dave@stgolabs.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
When many ADD_ADDR need to be sent, it can take some time to send each
of them, and create new subflows. Some CIs seem to occasionally have
issues with these tests, especially with "debug" kernels.
Two subtests will now run for a slightly longer time: the last two where
3 or more ADD_ADDR are sent during the test.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250907-net-next-mptcp-add_addr-retrans-adapt-v1-3-824cc805772b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ADD_ADDR can be retransmitted, and with, the parent commit, these
retransmissions can be sent quicker: from 2 minutes to less than one
second.
To avoid false positives where retransmitted ADD_ADDR causes higher
counters than expected, it is required to be more tolerant. Errors are
now only reported when fewer ADD_ADDRs have been sent/received, except
if no ADD_ADDR are expected.
Before the parent commit, the tolerance was present for each tests where
the ADD_ADDR could be retransmitted in a reasonable time (1 sec). Now
that all tests can have retransmitted ADD_ADDR, it is normal to apply
the same tolerance for all tests.
An alternative could be to disable the ADD_ADDR retransmissions by
default, but that's changing the default kernel behaviour. Plus,
ADD_ADDR retransmissions can be required for some tests. To avoid adding
exceptions to many tests, it seems better to increase the tolerance.
Later, we could add a new MIB counter to identify the ADD_ADDR
retransmissions, and remove the tolerance when this counter is
available.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250907-net-next-mptcp-add_addr-retrans-adapt-v1-2-824cc805772b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This v0.11.0 version introduces SC2329:
Warn when (non-escaping) functions are never invoked.
Except that, similar to SC2317, ShellCheck is currently unable to figure
out functions that are invoked via trap, or indirectly, when calling
functions via variables. It is then needed to disable this new SC2329.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250908-net-mptcp-misc-fixes-6-17-rc5-v1-3-5f2168a66079@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pmtu test takes nearly an hour when run on a debug kernel
(10min on a normal kernel, so the debug slow down is quite significant).
NIPA tries to ensure all results are delivered by a certain deadline
so this prevents it from retrying the test in case of a flake.
Looks like one of the slowest operations in the test is calling out
to ./openvswitch/ovs-dpctl.py to remove potential leftover OvS interfaces.
Check whether the interfaces exist in the first place in sysfs,
since it can be done directly in bash it is very fast.
This should save us around 20-30% of the test runtime.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250906214535.3204785-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fcnal-test.sh takes almost hour and a half to finish.
The tests are already grouped into ipv4, ipv6 and other.
Run those groups separately.
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250908201021.270681-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
icecc is a compiler wrapper that distributes compile jobs over a build
farm [1]. It works by sending toolchain binaries and preprocessed
source code to remote machines.
Unfortunately using it with BPF selftests causes build failures due to
a clang bug [2]. The problem is that clang suppresses the
-Wunused-value warning if the unused expression comes from a macro
expansion. Since icecc compiles preprocessed source code, this
information is not available. This leads to -Wunused-value false
positives.
obj_new_no_struct() and obj_new_acq() use the bpf_obj_new() macro and
discard the result. arena_spin_lock_slowpath() uses two macros that
produce values and ignores the results. Add (void) casts to explicitly
indicate that this is intentional and suppress the warning.
An alternative solution is to change the macros to not produce values.
This would work today for the arena_spin_lock_slowpath() issue, but in
the future there may appear users who need them. Another potential
solution is to replace these macros with functions. Unfortunately this
would not work, because these macros work with unknown types and
control flow.
[1] https://github.com/icecc/icecream
[2] https://github.com/llvm/llvm-project/issues/142614
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250829030017.102615-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Small cleanup and test extension to probe the bpf_crypto_{encrypt,decrypt}()
kfunc when a bad dst buffer is passed in to assert that an error is returned.
Also, encrypt_sanity() and skb_crypto_setup() were explicit to set the global
status variable to zero before any test, so do the same for decrypt_sanity().
Do not explicitly zero the on-stack err before bpf_crypto_ctx_create() given
the kfunc is expected to do it internally for the success case.
Before kernel fix:
# ./vmtest.sh -- ./test_progs -t crypto
[...]
[ 1.531200] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.533388] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
#87/1 crypto_basic/crypto_release:OK
#87/2 crypto_basic/crypto_acquire:OK
#87 crypto_basic:OK
test_crypto_sanity:PASS:skel open 0 nsec
test_crypto_sanity:PASS:ip netns add crypto_sanity_ns 0 nsec
test_crypto_sanity:PASS:ip -net crypto_sanity_ns -6 addr add face::1/128 dev lo nodad 0 nsec
test_crypto_sanity:PASS:ip -net crypto_sanity_ns link set dev lo up 0 nsec
test_crypto_sanity:PASS:open_netns 0 nsec
test_crypto_sanity:PASS:AF_ALG init fail 0 nsec
test_crypto_sanity:PASS:if_nametoindex lo 0 nsec
test_crypto_sanity:PASS:skb_crypto_setup fd 0 nsec
test_crypto_sanity:PASS:skb_crypto_setup 0 nsec
test_crypto_sanity:PASS:skb_crypto_setup retval 0 nsec
test_crypto_sanity:PASS:skb_crypto_setup status 0 nsec
test_crypto_sanity:PASS:create qdisc hook 0 nsec
test_crypto_sanity:PASS:make_sockaddr 0 nsec
test_crypto_sanity:PASS:attach encrypt filter 0 nsec
test_crypto_sanity:PASS:encrypt socket 0 nsec
test_crypto_sanity:PASS:encrypt send 0 nsec
test_crypto_sanity:FAIL:encrypt status unexpected error: -5 (errno 95)
#88 crypto_sanity:FAIL
Summary: 1/2 PASSED, 0 SKIPPED, 1 FAILED
After kernel fix:
# ./vmtest.sh -- ./test_progs -t crypto
[...]
[ 1.540963] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.542404] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
#87/1 crypto_basic/crypto_release:OK
#87/2 crypto_basic/crypto_acquire:OK
#87 crypto_basic:OK
#88 crypto_sanity:OK
Summary: 2/2 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20250829143657.318524-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new script and a new documentation 'make' target,
htmldocs-redirects.
This will generate HTML stub files in the HTML documentation output
directory that redirect the browser to the new path.
Suggested-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Suggested-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250905144608.577449-4-vegard.nossum@oracle.com>
Add a new script that wraps git to trawl the repository history for
renames of .rst files in the Documentation/ directory.
Example usage:
tools/docs/gen-renames.py --rev v6.17-rc3 > Documentation/.renames.txt
The output format is simply:
<old path> SPACE <new path> NEWLINE
where neither <old path> nor <new path> contain the Documentation/
prefix or the .rst suffix. The file is sorted alphabetically.
We can suggest rerunning the script for future renames (and squash the
resulting change) or rerun it periodically to keep the file up to date.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20250905144608.577449-2-vegard.nossum@oracle.com>
The second title line which shows symbol and DSO name is broken after
moving to another function at 'callq' instruction.
The ui_browser__show_title() is used for the first line which shows
global sample count and event name so it doesn't change across the
functions.
What it needs after processing 'call' instruction is to update the
second line onlly. Add a comment and call appropriate function.
You can verify the change by pressing ENTER on a 'call' instruction and
then ESC.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'll be used in other places.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
According to convention, the first argument should be 'struct
annotate_browser' instead of 'struct ui_brwoser'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250908061050.27517-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The instructions group is now generated by default so update the doc to
reflect this. Also explain the period/downsampling mechanism in more
detail.
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <Ben.Gainey@arm.com>
Cc: George Wort <George.Wort@arm.com>
Cc: Graham Woodward <Graham.Woodward@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Williams <Michael.Williams@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we only display the warning when the instructions group is
requested. Instructions are on by default, and the period applies to all
sample types anyway so always check the options and show the warning.
Reword the messages to be more explicit about which flags the warnings
apply to.
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <Ben.Gainey@arm.com>
Cc: George Wort <George.Wort@arm.com>
Cc: Graham Woodward <Graham.Woodward@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Williams <Michael.Williams@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The various sample types that are generated are based on the same SPE
sample, just placed into different sample type bins.
The same sample can be in multiple bins if it has flags set that cause
it to be.
Currently we're only applying the --itrace interval downsampling to the
instruction bin, which means that the sample would appear in one bin but
not another if it was skipped due to downsampling.
I don't thing anyone would want or expect this, so make this behave
consistently by applying the downsampling before generating any sample.
You might argue that the "instructions" interval type doesn't make sense
to apply to "memory" sample types because it would be skipping every n
memory samples, rather than every n instructions.
ut the downsampling was already not an instruction interval even for the
instruction samples. SPE has a hardware based sampling interval, and the
instruction interval was just a convenient way to specify further
downsampling.
This is hinted at in the warning message shown for intervals greater
than 1.
This makes SPE diverge from trace technologies like Intel PT and Arm
Coresight.
In those cases instruction samples can be reduced but all branches are
still emitted. This makes sense there, because branches form a complete
execution history, and asking to skip branches every n instructions
doesn't really make sense.
But for SPE, as mentioned above, downsampling the instruction samples
already wasn't consistent with trace technologies so we ended up with
some middle ground that had no benefit.
Now it's possible to reduce the volume of samples in all groups and
samples won't be missing from one group but present in another.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <Ben.Gainey@arm.com>
Cc: George Wort <George.Wort@arm.com>
Cc: Graham Woodward <Graham.Woodward@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Williams <Michael.Williams@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instruction sample types are enabled in the default itrace options in
perf, but this never applied to SPE because the default nanoseconds
period isn't supported.
This meant that instructions ended up being opt-in by the user only when
they requested an instruction based period.
Change the default period type to instructions so that instruction
samples are generated by default. This can overridden by specifying any
--itrace option.
This solves a common complaint from users that the unfiltered SPE
samples appear to be missing, and only the samples that have memory
flags set appear in the various memory groups.
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <Ben.Gainey@arm.com>
Cc: George Wort <George.Wort@arm.com>
Cc: Graham Woodward <Graham.Woodward@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Williams <Michael.Williams@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The loop in bench_sockmap_prog_destroy() has two issues:
1. Using 'sizeof(ctx.fds)' as the loop bound results in the number of
bytes, not the number of file descriptors, causing the loop to iterate
far more times than intended.
2. The condition 'ctx.fds[0] > 0' incorrectly checks only the first fd for
all iterations, potentially leaving file descriptors unclosed. Change
it to 'ctx.fds[i] > 0' to check each fd properly.
These fixes ensure correct cleanup of all file descriptors when the
benchmark exits.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250909124721.191555-1-jiayuan.chen@linux.dev
Closes: https://lore.kernel.org/bpf/aLqfWuRR9R_KTe5e@stanley.mountain/
I started seeing this in recent Fedora 42 kernels:
# uname -a
Linux number 6.16.3-200.fc42.x86_64 #1 SMP PREEMPT_DYNAMIC Sat Aug 23 17:02:17 UTC 2025 x86_64 GNU/Linux
#
# perf test vmlinux
1: vmlinux symtab matches kallsyms : FAILED!
#
Rust is enabled and these were the symbols causing the above failure,
i.e. found in vmlinux but not in /proc/kallsyms:
$ grep -w N /proc/kallsyms
0000000000000000 N __pfx__RNCINvNtNtNtCsbDUBuN8AbD4_4core4iter8adapters3map12map_try_foldjNtCs6vVzKs5jPr6_12drm_panic_qr7VersionuINtNtNtBa_3ops12control_flow11ControlFlowB10_ENcB10_0NCINvNvNtNtNtB8_6traits8iterator8Iterator4find5checkB10_NCNvMB12_B10_13from_segments0E0E0B12_
0000000000000000 N _RNCINvNtNtNtCsbDUBuN8AbD4_4core4iter8adapters3map12map_try_foldjNtCs6vVzKs5jPr6_12drm_panic_qr7VersionuINtNtNtBa_3ops12control_flow11ControlFlowB10_ENcB10_0NCINvNvNtNtNtB8_6traits8iterator8Iterator4find5checkB10_NCNvMB12_B10_13from_segments0E0E0B12_
$
So accept those 'N' symbols as well.
About them, from 'man nm':
"N" The symbol is a debugging symbol.
"n" The symbol is in a non-data, non-code, non-debug read-only section.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building with CONFIG_CFI_CLANG=y after the recent series to
separate the x86 startup code, there are objtool warnings along the
lines of:
vmlinux.o: warning: objtool: __pi___cfi_startup_64_load_idt() falls through to next function __pi_startup_64_load_idt()
vmlinux.o: warning: objtool: __pi___cfi_startup_64_setup_gdt_idt() falls through to next function __pi_startup_64_setup_gdt_idt()
vmlinux.o: warning: objtool: __pi___cfi___startup_64() falls through to next function __pi___startup_64()
As the comment in validate_branch() states, this is expected, so ignore
these symbols in the same way that __cfi_ and __pfx_ symbols are already
ignored for the rest of the kernel.
Fixes: 7b38dec3c5 ("x86/boot: Create a confined code area for startup code")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Add selftest for the IPv6 fragmentation regression which affected
several stable kernels.
Commit a18dfa9925 ("ipv6: save dontfrag in cork") was backported to
stable without some prerequisite commits. This caused a regression when
sending IPv6 UDP packets by preventing fragmentation and instead
returning -1 (EMSGSIZE).
Add selftest to check for this issue by attempting to send a packet
larger than the interface MTU. The packet will be fragmented on a
working kernel, with sendmsg(2) correctly returning the expected number
of bytes sent. When the regression is present, sendmsg returns -1 and
sets errno to EMSGSIZE.
Link: https://lore.kernel.org/stable/aElivdUXqd1OqgMY@karahi.gladserv.com
Signed-off-by: Brett A C Sheffield <bacs@librecast.net>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250903154925.13481-1-bacs@librecast.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add test to check the broadcast ethernet destination field is set
correctly.
This test sends a broadcast ping, captures it using tcpdump and
ensures that all bits of the 6 octet ethernet destination address
are correctly set by examining the output capture file.
Co-developed-by: Brett A C Sheffield <bacs@librecast.net>
Signed-off-by: Brett A C Sheffield <bacs@librecast.net>
Signed-off-by: Oscar Maes <oscmaes92@gmail.com>
Link: https://patch.msgid.link/20250902150240.4272-1-oscmaes92@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
vdso_test_abi provides the exact same functionality, properly uses
kselftest.h and explicitly calls into the vDSO without relying on the libc.
Drop the pointless testcase.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-8-90f499dd35f8@linutronix.de
To be y2038-safe, 32-bit userspace needs to explicitly call the 64-bit safe
time APIs. For this the 32-bit vDSOs contains a clock_gettime() variant
which always uses 64-bit time types.
Also test this vDSO function.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-7-90f499dd35f8@linutronix.de
The array relies on the numeric values of the clock IDs.
When reading the code it is not obvious that the order is correct.
Make the code easier to read by using explicit indices.
While at it make the array static.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-5-90f499dd35f8@linutronix.de
The test uses the kselftest.h framework and declares in its testplan to
always execute 16 testcases. If any of the clockids were not available,
the testplan would not be satisfied anymore and the test would fail.
Apparently that never happened, so the clockids are always available.
Remove the pointless checks.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-4-90f499dd35f8@linutronix.de
If AT_SYSINFO_EHDR is missing the whole test needs to be skipped.
Currently this results in the following output:
TAP version 13
1..16
# AT_SYSINFO_EHDR is not present!
This output is incorrect, as "1..16" still requires the subtest lines to
be printed, which isn't done however.
Switch to the correct skipping functions, so the output now correctly
indicates that no subtests are being run:
TAP version 13
1..0 # SKIP AT_SYSINFO_EHDR is not present!
Fixes: 693f5ca08c ("kselftest: Extend vDSO selftest")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-2-90f499dd35f8@linutronix.de
The _rval register variable is meant to be an output operand of the asm
statement but is instead used as input operand.
clang 20.1 notices this and triggers -Wuninitialized warnings:
tools/testing/selftests/timers/auxclock.c:154:10: error: variable '_rval' is uninitialized when used here [-Werror,-Wuninitialized]
154 | return VDSO_CALL(self->vdso_clock_gettime64, 2, clockid, ts);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/testing/selftests/timers/../vDSO/vdso_call.h:59:10: note: expanded from macro 'VDSO_CALL'
59 | : "r" (_rval) \
| ^~~~~
tools/testing/selftests/timers/auxclock.c:154:10: note: variable '_rval' is declared here
tools/testing/selftests/timers/../vDSO/vdso_call.h:47:2: note: expanded from macro 'VDSO_CALL'
47 | register long _rval asm ("r3"); \
| ^
It seems the list of input and output operands have been switched around.
However as the argument registers are not always initialized they can not
be marked as pure inputs as that would trigger -Wuninitialized warnings.
Adding _rval as another input and output operand does also not work as it
would collide with the existing _r3 variable.
Instead reuse _r3 for both the argument and the return value.
Fixes: 6eda706a53 ("selftests: vDSO: fix the way vDSO functions are called for powerpc")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/all/20250812-vdso-tests-fixes-v2-1-90f499dd35f8@linutronix.de
Closes: https://lore.kernel.org/oe-kbuild-all/202506180223.BOOk5jDK-lkp@intel.com/
Add comprehensive selftest to verify:
- Per-port actor priority setting via ad_actor_port_prio
- Aggregator selection behavior with port_priority ad_select policy
Also move cmd_jq helper from forwarding/lib.sh to net/lib.sh for
broader reusability across network selftests.
Here is the result output
# ./bond_lacp_prio.sh
TEST: bond 802.3ad (ad_actor_port_prio setting) [ OK ]
TEST: bond 802.3ad (ad_actor_port_prio select) [ OK ]
TEST: bond 802.3ad (ad_actor_port_prio switch) [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250902064501.360822-4-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To pick the fixes sent by Namhyung for tools/perf for v6.17-rc5 and get
closer to the other tools code that is used by tools/perf.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a typo in hyperv_cpuid.c test assertion log:
replace "our of supported range" -> "out of supported range".
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://lore.kernel.org/r/20250824181642.629297-1-alok.a.tiwari@oracle.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Commit 9bb88c6596 ("selftests: net: test extacks in netlink dumps")
moved netlink-dumps from TEST_GEN_PROGS to YNL_GEN_FILES.
But _FILES are not for tests, rather for utilities / helpers.
Create YNL_GEN_PROGS and include netlink-dumps there.
This makes netlink-dumps part of executed tests, again.
Link: https://patch.msgid.link/20250906211351.3192412-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recent changes to make netlink socket memory accounting must
have broken the implicit assumption of the netlink-dump test
that we can fit exactly 64 dumps into the socket. Handle the
failure mode properly, and increase the dump count to 80
to make sure we still run into the error condition if
the default buffer size increases in the future.
Link: https://patch.msgid.link/20250906211351.3192412-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The error message printed here only uses the previous err value,
which results in it being printed as 0.
When bpf_map__attach_struct_ops encounters an error,
it uses libbpf_err_ptr(err) to set errno = -err and returns NULL.
Therefore, Using -errno can fix this issue.
Fix before:
run_subtest:FAIL:1019 bpf_map__attach_struct_ops failed for map pro_epilogue: err=0
Fix after:
run_subtest:FAIL:1019 bpf_map__attach_struct_ops failed for map pro_epilogue: err=-9
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250908060810.1054341-1-yangfeng59949@163.com
Fix grammatical error in <past tense verb> + <infinitive>
construct related to memory allocation checks.
In essence change "Failed to allocated" to "Failed to allocate".
Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
Added parentheses around sizeof to make the expression clearer
and improve readability. This change has no functional impact.
```
[command]
./scripts/checkpatch.pl tools/testing/selftests/arm64/fp/sve-ptrace.c
[output]
WARNING: sizeof *sve should be sizeof(*sve)
```
Signed-off-by: Vivek Yadav <vivekyadav1207731111@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
The comment was correct, but `checkpatch` script flagged it with a warning
as shown in the output section. The comment is slightly modified
to improve readability, which also suppresses the warning.
```
[command]
./script/checkpatch.pl --strict -f tools/testing/selftests/arm64/fp/fp-stress.c
[output]
WARNING: Possible repeated word: 'on'
```
Signed-off-by: Vivek Yadav <vivekyadav1207731111@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
Nolibc now does have getauxval(), use it.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
The return value was not assigned to 'ret', so the check afterwards
does not do anything.
Fixes: 3d37d4307e ("kselftest/arm64: Add very basic GCS test program")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaL6SyQAKCRCRxhvAZXjc
ouTGAQDGiTnaENiOzRhzNl1XONTRv8a1uV0pxg4W3fNdiRlxgQEA/O90/+nM48KC
pdV3WHz5eGfcnMTpqgHxK6HYgwklJAY=
=oKnm
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.17-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"fuse:
- Prevent opening of non-regular backing files.
Fuse doesn't support non-regular files anyway.
- Check whether copy_file_range() returns a larger size than
requested.
- Prevent overflow in copy_file_range() as fuse currently only
supports 32-bit sized copies.
- Cache the blocksize value if the server returned a new value as
inode->i_blkbits isn't modified directly anymore.
- Fix i_blkbits handling for iomap partial writes.
By default i_blkbits is set to PAGE_SIZE which causes iomap to mark
the whole folio as uptodate even on a partial write. But fuseblk
filesystems support choosing a blocksize smaller than PAGE_SIZE
risking data corruption. Simply enforce PAGE_SIZE as blocksize for
fuseblk's internal inode for now.
- Prevent out-of-bounds acces in fuse_dev_write() when the number of
bytes to be retrieved is truncated to the fc->max_pages limit.
virtiofs:
- Fix page faults for DAX page addresses.
Misc:
- Tighten file handle decoding from userns.
Check that the decoded dentry itself has a valid idmapping in the
user namespace.
- Fix mount-notify selftests.
- Fix some indentation errors.
- Add an FMODE_ flag to indicate IOCB_HAS_METADATA availability.
This will be moved to an FOP_* flag with a bit more rework needed
for that to happen not suitable for a fix.
- Don't silently ignore metadata for sync read/write.
- Don't pointlessly log warning when reading coredump sysctls"
* tag 'vfs-6.17-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fuse: virtio_fs: fix page fault for DAX page address
selftests/fs/mount-notify: Fix compilation failure.
fhandle: use more consistent rules for decoding file handle from userns
fuse: Block access to folio overlimit
fuse: fix fuseblk i_blkbits for iomap partial writes
fuse: reflect cached blocksize if blocksize was changed
fuse: prevent overflow in copy_file_range return value
fuse: check if copy_file_range() returns larger than requested size
fuse: do not allow mapping a non-regular backing file
coredump: don't pointlessly check and spew warnings
fs: fix indentation style
block: don't silently ignore metadata for sync read/write
fs: add a FMODE_ flag to indicate IOCB_HAS_METADATA availability
Please enter a commit message to explain why this merge is necessary,
especially if it merges an updated upstream into a topic branch.
Thanks to -Waddress, the compiler warns that the ksft_test_result()
invocations in the arm64 tpidr2 selftest are always true. Oops.
Fix the test by, err, actually running the test functions.
Fixes: 6d80cb7313 ("kselftest/arm64: Convert tpidr2 test to use kselftest.h")
Signed-off-by: Bala-Vignesh-Reddy <reddybalavignesh9979@gmail.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Use ksft_perror() to report error codes from failing ptrace operations to
make it easier to interpret logs when things go wrong.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Fix -Wunused-result warning generated when compiled with gcc 13.3.0,
by checking fread's return value and handling errors, preventing
potential failures when reading from stdin.
Fixes compiler warning:
warning: ignoring return value of 'fread' declared with attribute
'warn_unused_result' [-Wunused-result]
Fixes: 806a15b254 ("kselftests/arm64: add PAuth test for whether exec() changes keys")
Signed-off-by: Bala-Vignesh-Reddy <reddybalavignesh9979@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
The minimum supported GCC version is 8.1, which supports flag output operands
and always defines __GCC_ASM_FLAG_OUTPUTS__ macro.
Remove code depending on __GCC_ASM_FLAG_OUTPUTS__ and use the "=@ccCOND" flag
output operand directly.
Use the equivalent "=@ccz" instead of "=@cce" flag output operand for
CMPXCHG8B and CMPXCHG16B instructions. These instructions set a single flag
bit - the Zero flag - and "=@ccz" is used to distinguish the CC user from
comparison instructions, where set ZERO flag indeed means that the values are
equal.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250905121723.GCaLrU04lP2A50PT-B@fat_crate.local
devmem test fails on NIPA. Most likely we get skb(s) with readable
frags (why?) but the failure manifests as an OOM. The OOM happens
because ncdevmem spams the following message:
recvmsg ret=-1
recvmsg: Bad address
As of today, ncdevmem can't deal with various reasons of EFAULT:
- falling back to regular recvmsg for non-devmem skbs
- increasing ctrl_data size (can't happen with ncdevmem's large buffer)
Exit (cleanly) with error when recvmsg returns EFAULT. This should at
least cause the test to cleanup its state.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250904182710.1586473-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This series contains fixes for use-after-free resulted in segfaults
after merging the bpf tree. Also a couple of build and test fixes.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCaLtFZAAKCRCMstVUGiXM
g7OFAP9F6M4Cpri9cxmbDyr188w85n+l6QC/Rjabardgn6NoEAEAovtNCO/0jEQ0
pUpYgMX3OCn+ARZGOR6vuJTSIlzj8gg=
=G7Fh
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.17-2025-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"Fixes for use-after-free that resulted in segfaults after merging the
bpf tree.
Also a couple of build and test fixes"
* tag 'perf-tools-fixes-for-v6.17-2025-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf symbol-elf: Add support for the block argument for libbfd
perf test: Checking BPF metadata collection fails on version string
perf tests: Fix "PE file support" test build
perf bpf-utils: Harden get_bpf_prog_info_linear
perf bpf-utils: Constify bpil_array_desc
perf bpf-event: Fix use-after-free in synthesis
Add the ability to dump BPF program instructions directly from veristat.
Previously, inspecting a program required separate bpftool invocations:
one to load and another to dump it, which meant running multiple
commands.
During active development, it's common for developers to use veristat
for testing verification. Integrating instruction dumping into veristat
reduces the need to switch tools and simplifies the workflow.
By making this information more readily accessible, this change aims
to streamline the BPF development cycle and improve usability for
developers.
This implementation leverages bpftool, by running it directly via popen
to avoid any code duplication and keep veristat simple.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250905140835.1416179-1-mykyta.yatsenko5@gmail.com
- fix GPIO submenu regression in Kconfig
- fix make clean under tools/gpio/
-----BEGIN PGP SIGNATURE-----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=D/dx
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix GPIO submenu regression in Kconfig
- fix make clean under tools/gpio/
* tag 'gpio-fixes-for-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
tools: gpio: remove the include directory on make clean
gpio: fix GPIO submenu in Kconfig
This test makes sure we do send a FIN on close()
if the receive queue contains data that was consumed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250903084720.1168904-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
James Clark caught that the BUILD_NONDISTRO=1 build with libbfd was
broken due to an update to the read_build_id function adding a
blocking argument. Add support for this argument by first opening the
file blocking or non-blocking, then switching from bfd_openr to
bfd_fdopenr and passing the opened fd. bfd_fdopenr closes the fd on
error and when bfd_close are called.
Reported-by: James Clark <james.clark@linaro.org>
Closes: https://lore.kernel.org/lkml/20250903-james-perf-read-build-id-fix-v1-2-6a694d0a980f@linaro.org/
Fixes: 2c369d91d0 ("perf symbol: Add blocking argument to filename__read_build_id")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250904161731.1193729-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
commit edf2cadf01 ("perf test: add test for BPF metadata collection")
fails consistently on the version string check. The perf version
string on some of the constant integration test machines contains
characters with special meaning in grep's extended regular expression
matching algorithm. The output of perf version is:
# perf version
perf version 6.17.0-20250814.rc1.git20.24ea63ea3877.63.fc42.s390x+git
#
and the '+' character has special meaning in egrep command.
Also the use of egrep is deprecated.
Change the perf version string check to fixed character matching
and get rid of egrep's warning being deprecated. Use grep -F instead.
Output before:
# perf test -F 102
Checking BPF metadata collection
egrep: warning: egrep is obsolescent; using grep -E
Basic BPF metadata test [Failed invalid output]
102: BPF metadata collection test : FAILED!
#
Output after:
# perf test -F 102
Checking BPF metadata collection
Basic BPF metadata test [Success]
102: BPF metadata collection test : Ok
#
Fixes: edf2cadf01 ("perf test: add test for BPF metadata collection")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Blake Jones <blakejones@google.com>
Link: https://lore.kernel.org/r/20250822122540.4104658-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Update events from v1.28 to v1.30. Update metrics from TMA 5.0 to 5.1.
The event updates come from:
c6a01e651c8b3a5b3f8e
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: linux-actions@lists.infradead.org
Link: https://lore.kernel.org/r/20250818190416.145274-18-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update events from v1.14 to v1.16. Update metrics from TMA 5.0 to 5.1.
The event updates come from:
c3e91c6e6b
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: linux-actions@lists.infradead.org
Link: https://lore.kernel.org/r/20250818190416.145274-15-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update events from v1.14 to v1.17. Update metrics from TMA 5.0 to 5.1.
The event updates come from:
6bdcbce3e91684fa543f
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: linux-actions@lists.infradead.org
Link: https://lore.kernel.org/r/20250818190416.145274-14-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update events from v1.10 to v1.12. Update metrics from TMA 5.0 to 5.1.
The event updates come from:
1684fa543f
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: linux-actions@lists.infradead.org
Link: https://lore.kernel.org/r/20250818190416.145274-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update events from v1.14 to v1.16. Update metrics from TMA 5.0 to 5.1.
The event updates come from:
9020e49e79a0567b5618
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: linux-actions@lists.infradead.org
Link: https://lore.kernel.org/r/20250818190416.145274-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update events from v1.09 to v1.12. Update metrics from TMA 5.0 to 5.1.
The event updates come from:
d5b1d2e9eeb9c162b7c9
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: linux-actions@lists.infradead.org
Link: https://lore.kernel.org/r/20250818190416.145274-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update events from v1.31 to v1.33. Update metrics from TMA 5.0 to 5.1.
The event updates come from:
c504da6cb04c18312c1a
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: linux-actions@lists.infradead.org
Link: https://lore.kernel.org/r/20250818190416.145274-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "Parsing of PMU event table metrics with fake PMUs" will test
metrics on machines/models that may be missing a PMU, in such a case
the fake_pmu should be used to avoid errors.
Metrics that get the cpumask from a different PMU, such as
"tsc/cpu=cpu_atom/", also need to be resilient in this test.
The parse_events_state fake_pmu is set when missing PMUs should be
ignored.
So that it can be queried, pass it to the config term functions, as well
as to get_config_cpu, then ignore failures when fake_pmu is set.
Some minor code refactoring to cut down on the indent and remove some
redundant checks.
Fixes: bd741d80dc ("perf parse-events: Allow the cpu term to be a PMU or CPU range")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: linux-actions@lists.infradead.org
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20250818190416.145274-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a spelling mistake in a Python doc string. Fix it.
Fixes: d0550be70f ("perf python: Add parse_metrics function")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: kernel-janitors@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250904090904.2782814-1-colin.i.king@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The workload hint may contain some other hints which are not defined.
So mask out unsupported types. Currently only lower 4 bits of workload
type hints are defined.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250828201541.931425-1-srinivas.pandruvada@linux.intel.com
[ rjw: Subject cleanup ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Remove unused 'elf' and 'path' parameters from parse_usdt_note function
signature. These parameters are not referenced within the function body
and only add unnecessary complexity.
The function only requires the note header, data buffer, offsets, and
output structure to perform USDT note parsing.
Update function declaration, definition, and the single call site in
collect_usdt_targets() to match the simplified signature.
This is a safe internal cleanup as parse_usdt_note is a static function.
Signed-off-by: Jiawei Zhao <phoenix500526@163.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20250904030525.1932293-1-phoenix500526@163.com
We're reverting the removal of a Sundance driver, a user has appeared.
This makes the PR rather large in terms of LoC.
There's a conspicuous absence of real, user-reported 6.17 issues.
Slightly worried that the summer distracted people from testing.
Previous releases - regressions:
- ax25: properly unshare skbs in ax25_kiss_rcv()
Previous releases - always broken:
- phylink: disable autoneg for interfaces that have no inband,
fix regression on pcs-lynx (NXP LS1088)
- vxlan: fix null-deref when using nexthop objects
- batman-adv: fix OOB read/write in network-coding decode
- icmp: icmp_ndo_send: fix reversing address translation for replies
- tcp: fix socket ref leak in TCP-AO failure handling for IPv6
- mctp:
- mctp_fraq_queue should take ownership of passed skb
- usb: initialise mac header in RX path, avoid WARN
- wifi: mac80211: do not permit 40 MHz EHT operation on 5/6 GHz,
respect device limitations
- wifi: wilc1000: avoid buffer overflow in WID string configuration
- wifi: mt76:
- fix regressions from mt7996 MLO support rework
- fix offchannel handling issues on mt7996
- fix multiple wcid linked list corruption issues
- mt7921: don't disconnect when AP requests switch to a channel which
requires radar detection
- mt7925u: use connac3 tx aggr check in tx complete
- wifi: intel:
- improve validation of ACPI DSM data
- cfg: restore some 1000 series configs
- wifi: ath:
- ath11k: a fix for GTK rekeying
- ath12k: a missed WiFi7 capability (multi-link EMLSR)
- eth: intel:
- ice: fix races in "low latency" firmware interface for Tx timestamps
- idpf: set mac type when adding and removing MAC filters
- i40e: remove racy read access to some debugfs files
Misc:
- Revert "eth: remove the DLink/Sundance (ST201) driver"
- netfilter: conntrack: helper: Replace -EEXIST by -EBUSY, avoid confusing
modprobe
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=e0Jg
-----END PGP SIGNATURE-----
Merge tag 'net-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and Bluetooth.
We're reverting the removal of a Sundance driver, a user has appeared.
This makes the PR rather large in terms of LoC.
There's a conspicuous absence of real, user-reported 6.17 issues.
Slightly worried that the summer distracted people from testing.
Previous releases - regressions:
- ax25: properly unshare skbs in ax25_kiss_rcv()
Previous releases - always broken:
- phylink: disable autoneg for interfaces that have no inband, fix
regression on pcs-lynx (NXP LS1088)
- vxlan: fix null-deref when using nexthop objects
- batman-adv: fix OOB read/write in network-coding decode
- icmp: icmp_ndo_send: fix reversing address translation for replies
- tcp: fix socket ref leak in TCP-AO failure handling for IPv6
- mctp:
- mctp_fraq_queue should take ownership of passed skb
- usb: initialise mac header in RX path, avoid WARN
- wifi: mac80211: do not permit 40 MHz EHT operation on 5/6 GHz,
respect device limitations
- wifi: wilc1000: avoid buffer overflow in WID string configuration
- wifi: mt76:
- fix regressions from mt7996 MLO support rework
- fix offchannel handling issues on mt7996
- fix multiple wcid linked list corruption issues
- mt7921: don't disconnect when AP requests switch to a channel
which requires radar detection
- mt7925u: use connac3 tx aggr check in tx complete
- wifi: intel:
- improve validation of ACPI DSM data
- cfg: restore some 1000 series configs
- wifi: ath:
- ath11k: a fix for GTK rekeying
- ath12k: a missed WiFi7 capability (multi-link EMLSR)
- eth: intel:
- ice: fix races in "low latency" firmware interface for Tx timestamps
- idpf: set mac type when adding and removing MAC filters
- i40e: remove racy read access to some debugfs files
Misc:
- Revert "eth: remove the DLink/Sundance (ST201) driver"
- netfilter: conntrack: helper: Replace -EEXIST by -EBUSY, avoid
confusing modprobe"
* tag 'net-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
phy: mscc: Stop taking ts_lock for tx_queue and use its own lock
selftest: net: Fix weird setsockopt() in bind_bhash.c.
MAINTAINERS: add Sabrina to TLS maintainers
gve: update MAINTAINERS
ppp: fix memory leak in pad_compress_skb
net: xilinx: axienet: Add error handling for RX metadata pointer retrieval
net: atm: fix memory leak in atm_register_sysfs when device_register fail
netfilter: nf_tables: Introduce NFTA_DEVICE_PREFIX
selftests: netfilter: fix udpclash tool hang
ax25: properly unshare skbs in ax25_kiss_rcv()
mctp: return -ENOPROTOOPT for unknown getsockopt options
net/smc: Remove validation of reserved bits in CLC Decline message
ipv4: Fix NULL vs error pointer check in inet_blackhole_dev_init()
net: thunder_bgx: decrement cleanup index before use
net: thunder_bgx: add a missing of_node_put
net: phylink: move PHY interrupt request to non-fail path
net: lockless sock_i_ino()
tools: ynl-gen: fix nested array counting
wifi: wilc1000: avoid buffer overflow in WID string configuration
wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result()
...
Add a timer test case to test 'bpf_in_interrupt()'.
cd tools/testing/selftests/bpf
./test_progs -t timer_interrupt
462 timer_interrupt:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20250903140438.59517-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Filtering pid_tgid is meanlingless when the current task is preempted by
an interrupt.
To address this, introduce 'bpf_in_interrupt()' helper function, which
allows BPF programs to determine whether they are executing in interrupt
context.
'get_preempt_count()':
* On x86, '*(int *) bpf_this_cpu_ptr(&__preempt_count)'.
* On arm64, 'bpf_get_current_task_btf()->thread_info.preempt.count'.
Then 'bpf_in_interrupt()' will be:
* If !PREEMPT_RT, 'get_preempt_count() & (NMI_MASK | HARDIRQ_MASK
| SOFTIRQ_MASK)'.
* If PREEMPT_RT, '(get_preempt_count() & (NMI_MASK | HARDIRQ_MASK))
| (bpf_get_current_task_btf()->softirq_disable_cnt & SOFTIRQ_MASK)'.
As for other archs, it can be added support by updating
'get_preempt_count()'.
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20250903140438.59517-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For now, the benchmark for kprobe-multi is single, which means there is
only 1 function is hooked during testing. Add the testing
"kprobe-multi-all", which will hook all the kernel functions during
the benchmark. And the "kretprobe-multi-all" is added too.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20250904021011.14069-4-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We need to get all the kernel function that can be traced sometimes, so we
move the get_syms() and get_addrs() in kprobe_multi_test.c to
trace_helpers.c and rename it to bpf_get_ksyms() and bpf_get_addrs().
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20250904021011.14069-2-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bind_bhash.c passes (SO_REUSEADDR | SO_REUSEPORT) to setsockopt().
In the asm-generic definition, the value happens to match with the
bare SO_REUSEPORT, (2 | 15) == 15, but not on some arch.
arch/alpha/include/uapi/asm/socket.h:18:#define SO_REUSEADDR 0x0004
arch/alpha/include/uapi/asm/socket.h:24:#define SO_REUSEPORT 0x0200
arch/mips/include/uapi/asm/socket.h:24:#define SO_REUSEADDR 0x0004 /* Allow reuse of local addresses. */
arch/mips/include/uapi/asm/socket.h:33:#define SO_REUSEPORT 0x0200 /* Allow local address and port reuse. */
arch/parisc/include/uapi/asm/socket.h:12:#define SO_REUSEADDR 0x0004
arch/parisc/include/uapi/asm/socket.h:18:#define SO_REUSEPORT 0x0200
arch/sparc/include/uapi/asm/socket.h:13:#define SO_REUSEADDR 0x0004
arch/sparc/include/uapi/asm/socket.h:20:#define SO_REUSEPORT 0x0200
include/uapi/asm-generic/socket.h:12:#define SO_REUSEADDR 2
include/uapi/asm-generic/socket.h:27:#define SO_REUSEPORT 15
Let's pass SO_REUSEPORT only.
Fixes: c35ecb95c4 ("selftests/net: Add test for timing a bind request to a port with a populated bhash entry")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250903222938.2601522-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
