Add an implementation of sha256_finup_2x_arch() for arm64. It
interleaves the computation of two SHA-256 hashes using the ARMv8
SHA-256 instructions. dm-verity and fs-verity will take advantage of
this for greatly improved performance on capable CPUs.
This increases the throughput of SHA-256 hashing 4096-byte messages by
the following amounts on the following CPUs:
ARM Cortex-X1: 70%
ARM Cortex-X3: 68%
ARM Cortex-A76: 65%
ARM Cortex-A715: 43%
ARM Cortex-A510: 25%
ARM Cortex-A55: 8%
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250915160819.140019-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Many arm64 and x86_64 CPUs can compute two SHA-256 hashes in nearly the
same speed as one, if the instructions are interleaved. This is because
SHA-256 is serialized block-by-block, and two interleaved hashes take
much better advantage of the CPU's instruction-level parallelism.
Meanwhile, a very common use case for SHA-256 hashing in the Linux
kernel is dm-verity and fs-verity. Both use a Merkle tree that has a
fixed block size, usually 4096 bytes with an empty or 32-byte salt
prepended. Usually, many blocks need to be hashed at a time. This is
an ideal scenario for 2-way interleaved hashing.
To enable this optimization, add a new function sha256_finup_2x() to the
SHA-256 library API. It computes the hash of two equal-length messages,
starting from a common initial context.
For now it always falls back to sequential processing. Later patches
will wire up arm64 and x86_64 optimized implementations.
Note that the interleaving factor could in principle be higher than 2x.
However, that runs into many practical difficulties and CPU throughput
limitations. Thus, both the implementations I'm adding are 2x. In the
interest of using the simplest solution, the API matches that.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250915160819.140019-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since wp$$==wq$$, it doesn't need to load the same data twice, use move
instruction to replace one of the loads to let the program run faster.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250718072711.3865118-3-zhangchunyan@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
These two C files don't reference things defined in simd.h or types.h
so remove these redundant #inclusions.
Fixes: 6093faaf95 ("raid6: Add RISC-V SIMD syndrome and recovery calculations")
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250718072711.3865118-2-zhangchunyan@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Various KUnit tests require PCI infrastructure to work. All normal
platforms enable PCI by default, but UML does not. Enabling PCI from
.kunitconfig files is problematic as it would not be portable. So in
commit 6fc3a8636a ("kunit: tool: Enable virtio/PCI by default on UML")
PCI was enabled by way of CONFIG_UML_PCI_OVER_VIRTIO=y. However
CONFIG_UML_PCI_OVER_VIRTIO requires additional configuration of
CONFIG_UML_PCI_OVER_VIRTIO_DEVICE_ID or will otherwise trigger a WARN() in
virtio_pcidev_init(). However there is no one correct value for
UML_PCI_OVER_VIRTIO_DEVICE_ID which could be used by default.
This warning is confusing when debugging test failures.
On the other hand, the functionality of CONFIG_UML_PCI_OVER_VIRTIO is not
used at all, given that it is completely non-functional as indicated by
the WARN() in question. Instead it is only used as a way to enable
CONFIG_UML_PCI which itself is not directly configurable.
Instead of going through CONFIG_UML_PCI_OVER_VIRTIO, introduce a custom
configuration option which enables CONFIG_UML_PCI without triggering
warnings or building dead code.
Link: https://lore.kernel.org/r/20250908-kunit-uml-pci-v2-1-d8eba5f73c9d@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Previously btree_merge() called btree_last() only to test existence, then
performed an extra btree_lookup() to fetch the value. This patch changes
it to directly use the value returned by btree_last(), avoiding redundant
lookups and simplifying the merge loop.
Link: https://lkml.kernel.org/r/20250826161741.686704-1-409411716@gms.tku.edu.tw
Signed-off-by: Guan-Chun Wu <409411716@gms.tku.edu.tw>
Cc: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The helper this_cpu_in_panic() duplicated logic already provided by
panic_on_this_cpu().
Remove this_cpu_in_panic() and switch all users to panic_on_this_cpu().
This simplifies the code and avoids having two helpers for the same check.
Link: https://lkml.kernel.org/r/20250825022947.1596226-8-wangjinchao600@gmail.com
Signed-off-by: Jinchao Wang <wangjinchao600@gmail.com>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Kees Cook <kees@kernel.org>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Luo Gengkun <luogengkun@huaweicloud.com>
Cc: Max Kellermann <max.kellermann@ionos.com>
Cc: Nam Cao <namcao@linutronix.de>
Cc: oushixiong <oushixiong@kylinos.cn>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Qianqiang Liu <qianqiang.liu@163.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Zimemrmann <tzimmermann@suse.de>
Cc: Thorsten Blum <thorsten.blum@linux.dev>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Yunhui Cui <cuiyunhui@bytedance.com>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Generalization of panic_print's dump function [1] has been merged, and
this patchset is to address some remaining issues, like adding note of the
obsoletion of 'panic_print' cmdline parameter, refining the kernel
document for panic_print, and hardening some string management.
This patch (of 4):
It is a normal case that bitmask parameter is 0, so pre-initialize the
names[] to null string to cover this case.
Also remove the superfluous "+1" in names[sizeof(sys_info_avail) + 1],
which is needed for 'strlen()', but not for 'sizeof()'.
Link: https://lkml.kernel.org/r/20250825025701.81921-1-feng.tang@linux.alibaba.com
Link: https://lkml.kernel.org/r/20250825025701.81921-2-feng.tang@linux.alibaba.com
Link: Link: https://lkml.kernel.org/r/20250703021004.42328-1-feng.tang@linux.alibaba.com [1]
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Askar Safin <safinaskar@zohomail.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace the ternary (enable ? "on" : "off") with the str_on_off() helper
from string_choices.h. This improves readability by replacing the
three-operand ternary with a single function call, ensures consistent
string output, and allows potential string deduplication by the linker,
resulting in a slightly smaller binary.
Link: https://lkml.kernel.org/r/20250814093827.237980-1-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace ternary (condition ? "true" : "false") expressions with the
str_true_false() helper from string_choices.h. This improves readability
by replacing the three-operand ternary with a single function call,
ensures consistent string output, and allows potential string
deduplication by the linker, resulting in a slightly smaller binary.
Link: https://lkml.kernel.org/r/20250814095033.244034-1-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kzalloc() has already been initialized to full 0 space, there is no need
to use memset() to initialize again.
Link: https://lkml.kernel.org/r/20250811082739.378284-1-liaoyuanhong@vivo.com
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 16f5dfbc85 ("gfp: include __GFP_NOWARN in GFP_NOWAIT") made
GFP_NOWAIT implicitly include __GFP_NOWARN.
Therefore, explicit __GFP_NOWARN combined with GFP_NOWAIT (e.g.,
`GFP_NOWAIT | __GFP_NOWARN`) is now redundant. Let's clean up these
redundant flags across subsystems.
No functional changes.
Link: https://lkml.kernel.org/r/20250805023031.331718-1-rongqianfeng@vivo.com
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
MAPLE_PARENT_RANGE32 should be 0x02 as a 32 bit node is indicated by the
bit pattern 0b010 which is the hex value 0x02. There are no users
currently, so there is no associated bug with this wrong value.
Fix typo Note -> Node and replace x with b to indicate binary values.
Link: https://lkml.kernel.org/r/20250826151344.403286-1-sidhartha.kumar@oracle.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The result of integer comparison already evaluates to bool. No need for
explicit conversion.
No functional impact.
Link: https://lkml.kernel.org/r/20250819070457.486348-1-zhao.xichao@vivo.com
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* Update kho_test_save() so that folios array won't be freed when
returning from the function and the fdt will be freed on error
* Reset state->nr_folios to 0 in kho_test_generate_data() on error
* Simplify allocation of folios info in fdt.
Link: https://lkml.kernel.org/r/20250811082510.4154080-3-rppt@kernel.org
Fixes: b753522bed ("kho: add test for kexec handover")
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reported-by: Pratyush Yadav <pratyush@kernel.org>
Closes: https://lore.kernel.org/all/mafs0zfcjcepf.fsf@kernel.org
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Changyuan Lyu <changyuanl@google.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 16f5dfbc85 ("gfp: include __GFP_NOWARN in GFP_NOWAIT") made
GFP_NOWAIT implicitly include __GFP_NOWARN.
Therefore, explicit __GFP_NOWARN combined with GFP_NOWAIT (e.g.,
`GFP_NOWAIT | __GFP_NOWARN`) is now redundant. Let's clean up these
redundant flags across subsystems.
No functional changes.
Link: https://lkml.kernel.org/r/20250804130018.484321-1-rongqianfeng@vivo.com
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reimplement k[v]realloc_node() to be able to set node and alignment should
a user need to do so. In order to do that while retaining the maximal
backward compatibility, add k[v]realloc_node_align() functions and
redefine the rest of API using these new ones.
While doing that, we also keep the number of _noprof variants to a
minimum, which implies some changes to the existing users of older _noprof
functions, that basically being bcachefs.
With that change we also provide the ability for the Rust part of the
kernel to set node and alignment in its K[v]xxx [re]allocations.
Link: https://lkml.kernel.org/r/20250806124147.1724658-1-vitaly.wool@konsulko.se
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.se>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jann Horn <jannh@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
No more callers.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The field timer->base->get_time is a private implementation detail and
should not be accessed outside of the hrtimer core.
Switch to the equivalent helper.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250821-hrtimer-cleanup-get_time-v2-4-3ae822e5bfbd@linutronix.de
While tracking down a problem where constant expressions used by
BUILD_BUG_ON() suddenly stopped working[1], we found that an added static
initializer was convincing the compiler that it couldn't track the state
of the prior statically initialized value. Tracing this down found that
ffs() was used in the initializer macro, but since it wasn't marked with
__attribute_const__, the compiler had to assume the function might
change variable states as a side-effect (which is not true for ffs(),
which provides deterministic math results).
Validate all the __attibute_const__ annotations were found for all
architectures by reproducing the specific problem encountered in the
original bug report.
Build and run tested with everything I could reach with KUnit:
$ ./tools/testing/kunit/kunit.py run --arch=x86_64 ffs
$ ./tools/testing/kunit/kunit.py run --arch=i386 ffs
$ ./tools/testing/kunit/kunit.py run --arch=arm64 --make_options "CROSS_COMPILE=aarch64-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=arm --make_options "CROSS_COMPILE=arm-linux-gnueabi-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=powerpc ffs
$ ./tools/testing/kunit/kunit.py run --arch=powerpc32 ffs
$ ./tools/testing/kunit/kunit.py run --arch=powerpcle ffs
$ ./tools/testing/kunit/kunit.py run --arch=m68k ffs
$ ./tools/testing/kunit/kunit.py run --arch=loongarch ffs
$ ./tools/testing/kunit/kunit.py run --arch=s390 --make_options "CROSS_COMPILE=s390x-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=riscv --make_options "CROSS_COMPILE=riscv64-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=riscv32 --make_options "CROSS_COMPILE=riscv64-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=sparc --make_options "CROSS_COMPILE=sparc64-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=sparc64 --make_options "CROSS_COMPILE=sparc64-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=alpha --make_options "CROSS_COMPILE=alpha-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=sh --make_options "CROSS_COMPILE=sh4-linux-gnu-" ffs
Closes: https://github.com/KSPP/linux/issues/364
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250804164417.1612371-17-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
While tracking down a problem where constant expressions used by
BUILD_BUG_ON() suddenly stopped working[1], we found that an added static
initializer was convincing the compiler that it couldn't track the state
of the prior statically initialized value. Tracing this down found that
ffs() was used in the initializer macro, but since it wasn't marked with
__attribute__const__, the compiler had to assume the function might
change variable states as a side-effect (which is not true for ffs(),
which provides deterministic math results).
Add missing __attribute_const__ annotations to generic implementations of
ffs(), __ffs(), fls(), and __fls() functions. These are pure mathematical
functions that always return the same result for the same input with no
side effects, making them eligible for compiler optimization.
Build tested with x86_64 defconfig using GCC 14.2.0, which should validate
the implementations when used by ARM, ARM64, LoongArch, Microblaze,
NIOS2, and SPARC32 architectures.
Link: https://github.com/KSPP/linux/issues/364 [1]
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250804164417.1612371-2-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Add KUnit tests for ffs()-family bit scanning functions: ffs(), __ffs(),
fls(), __fls(), fls64(), __ffs64(), and ffz(). The tests validate
mathematical relationships (e.g. ffs(x) == __ffs(x) + 1), and test zero
values, power-of-2 patterns, maximum values, and sparse bit patterns.
Build and run tested with everything I could reach with KUnit:
$ ./tools/testing/kunit/kunit.py run --arch=x86_64 ffs
$ ./tools/testing/kunit/kunit.py run --arch=i386 ffs
$ ./tools/testing/kunit/kunit.py run --arch=arm64 --make_options "CROSS_COMPILE=aarch64-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=arm --make_options "CROSS_COMPILE=arm-linux-gnueabihf-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=powerpc ffs
$ ./tools/testing/kunit/kunit.py run --arch=powerpc32 ffs
$ ./tools/testing/kunit/kunit.py run --arch=powerpcle ffs
$ ./tools/testing/kunit/kunit.py run --arch=riscv --make_options "CROSS_COMPILE=riscv64-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=riscv32 --make_options "CROSS_COMPILE=riscv64-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=s390 --make_options "CROSS_COMPILE=s390x-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=m68k ffs
$ ./tools/testing/kunit/kunit.py run --arch=loongarch ffs
$ ./tools/testing/kunit/kunit.py run --arch=mips --make_options "CROSS_COMPILE=mipsel-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=sparc --make_options "CROSS_COMPILE=sparc64-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=sparc64 --make_options "CROSS_COMPILE=sparc64-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=alpha --make_options "CROSS_COMPILE=alpha-linux-gnu-" ffs
$ ./tools/testing/kunit/kunit.py run --arch=sh --make_options "CROSS_COMPILE=sh4-linux-gnu-" ffs
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250804164417.1612371-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Now that the Curve25519 library has been disentangled from CRYPTO,
adding CRYPTO_SELFTESTS as a default value of
CRYPTO_LIB_CURVE25519_KUNIT_TEST no longer causes a recursive kconfig
dependency. Do this, which makes this option consistent with the other
crypto KUnit test options in the same file.
Link: https://lore.kernel.org/r/20250906213523.84915-12-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reorganize the Curve25519 library code:
- Build a single libcurve25519 module, instead of up to three modules:
libcurve25519, libcurve25519-generic, and an arch-specific module.
- Move the arch-specific Curve25519 code from arch/$(SRCARCH)/crypto/ to
lib/crypto/$(SRCARCH)/. Centralize the build rules into
lib/crypto/Makefile and lib/crypto/Kconfig.
- Include the arch-specific code directly in lib/crypto/curve25519.c via
a header, rather than using a separate .c file.
- Eliminate the entanglement with CRYPTO. CRYPTO_LIB_CURVE25519 no
longer selects CRYPTO, and the arch-specific Curve25519 code no longer
depends on CRYPTO.
This brings Curve25519 in line with the latest conventions for
lib/crypto/, used by other algorithms. The exception is that I kept the
generic code in separate translation units for now. (Some of the
function names collide between the x86 and generic Curve25519 code. And
the Curve25519 functions are very long anyway, so inlining doesn't
matter as much for Curve25519 as it does for some other algorithms.)
Link: https://lore.kernel.org/r/20250906213523.84915-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Move the Curve25519 test from an ad-hoc self-test to a KUnit test.
Generally keep the same test logic for now, just translated to KUnit.
There's one exception, which is that I dropped the incomplete test of
curve25519_generic(). The approach I'm taking to cover the different
implementations with the KUnit tests is to just rely on booting kernels
in QEMU with different '-cpu' options, rather than try to make the tests
(incompletely) test multiple implementations on one CPU. This way, both
the test and the library API are simpler.
This commit makes the file lib/crypto/curve25519.c no longer needed, as
its only purpose was to call the self-test. However, keep it for now,
since a later commit will add code to it again.
Temporarily omit the default value of CRYPTO_SELFTESTS that the other
lib/crypto/ KUnit tests have. It would cause a recursive kconfig
dependency, since the Curve25519 code is still entangled with CRYPTO. A
later commit will fix that.
Link: https://lore.kernel.org/r/20250906213523.84915-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
All architectures implementing time-related functionality in the vDSO are
using the generic vDSO library which handles time namespaces properly.
Remove the now unnecessary Kconfig symbol.
Enables the use of time namespaces on architectures, which use the
generic vDSO but did not enable GENERIC_VDSO_TIME_NS, namely MIPS and arm.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/all/20250826-vdso-cleanups-v1-10-d9b65750e49f@linutronix.de
All users of the generic vDSO library also use the generic vDSO datastore.
Remove the now unnecessary Kconfig symbol.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/all/20250826-vdso-cleanups-v1-9-d9b65750e49f@linutronix.de
All calls of these functions are already gated behind CONFIG_TIME_NS. The
compiler will already optimize them away if time namespaces are disabled.
Drop the unnecessary stubs.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250826-vdso-cleanups-v1-4-d9b65750e49f@linutronix.de
When the generic vDSO does not provide time functions, as for example on
riscv32, then the time data store is not necessary.
Avoid allocating these time data pages when not used.
Fixes: df7fcbefa7 ("vdso: Add generic time data storage")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250826-vdso-cleanups-v1-1-d9b65750e49f@linutronix.de
Add a KUnit test suite for BLAKE2s. Most of the core test logic is in
the previously-added hash-test-template.h. This commit just adds the
actual KUnit suite, commits the generated test vectors to the tree so
that gen-hash-testvecs.py won't have to be run at build time, and adds a
few BLAKE2s-specific test cases.
This is the replacement for blake2s-selftest, which an earlier commit
removed. Improvements over blake2s-selftest include integration with
KUnit, more comprehensive test cases, and support for benchmarking.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-13-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
As was done with the other algorithms, reorganize the BLAKE2s code so
that the generic implementation and the arch-specific "glue" code is
consolidated into a single translation unit, so that the compiler will
inline the functions and automatically decide whether to include the
generic code in the resulting binary or not.
Similarly, also consolidate the build rules into
lib/crypto/{Makefile,Kconfig}. This removes the last uses of
lib/crypto/{arm,x86}/{Makefile,Kconfig}, so remove those too.
Don't keep the !KMSAN dependency. It was needed only for other
algorithms such as ChaCha that initialize memory from assembly code.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-12-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Move blake2s_compress_generic() from blake2s-generic.c to blake2s.c.
For now it's still guarded by CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC, but
this prepares for changing it to a 'static __maybe_unused' function and
just using the compiler to automatically decide its inclusion.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
When support for a crypto algorithm is enabled, the arch-optimized
implementation of that algorithm should be enabled too. We've learned
this the hard way many times over the years: people regularly forget to
enable the arch-optimized implementations of the crypto algorithms,
resulting in significant performance being left on the table.
Currently, BLAKE2s support is always enabled ('obj-y'), since random.c
uses it. Therefore, the arch-optimized BLAKE2s code, which exists for
ARM and x86_64, should be always enabled too. Let's do that.
Note that the effect on kernel image size is very small and should not
be a concern. On ARM, enabling CRYPTO_BLAKE2S_ARM actually *shrinks*
the kernel size by about 1200 bytes, since the ARM-optimized
blake2s_compress() completely replaces the generic blake2s_compress().
On x86_64, enabling CRYPTO_BLAKE2S_X86 increases the kernel size by
about 1400 bytes, as the generic blake2s_compress() is still included as
a fallback; however, for context, that is only about a quarter the size
of the generic blake2s_compress(). The x86_64 optimized BLAKE2s code
uses much less icache at runtime than the generic code.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Save 480 bytes of .rodata by replacing the .long constants with .bytes,
and using the vpmovzxbd instruction to expand them.
Also update the code to do the loads before incrementing %rax rather
than after. This avoids the need for the first load to use an offset.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Consolidate the ChaCha code into a single module (excluding
chacha-block-generic.c which remains always built-in for random.c),
similar to various other algorithms:
- Each arch now provides a header file lib/crypto/$(SRCARCH)/chacha.h,
replacing lib/crypto/$(SRCARCH)/chacha*.c. The header defines
chacha_crypt_arch() and hchacha_block_arch(). It is included by
lib/crypto/chacha.c, and thus the code gets built into the single
libchacha module, with improved inlining in some cases.
- Whether arch-optimized ChaCha is buildable is now controlled centrally
by lib/crypto/Kconfig instead of by lib/crypto/$(SRCARCH)/Kconfig.
The conditions for enabling it remain the same as before, and it
remains enabled by default.
- Any additional arch-specific translation units for the optimized
ChaCha code, such as assembly files, are now compiled by
lib/crypto/Makefile instead of lib/crypto/$(SRCARCH)/Makefile.
This removes the last use for the Makefile and Kconfig files in the
arm64, mips, powerpc, riscv, and s390 subdirectories of lib/crypto/. So
also remove those files and the references to them.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Rename libchacha.c to chacha.c to make the naming consistent with other
algorithms and allow additional source files to be added to the
libchacha module. This file currently contains chacha_crypt_generic(),
but it will soon be updated to contain chacha_crypt().
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Rename chacha.c to chacha-block-generic.c to free up the name chacha.c
for the high-level API entry points (chacha_crypt() and
hchacha_block()), similar to the other algorithms.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250827151131.27733-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
This is a straight import of the OpenSSL/CRYPTOGAMS Poly1305
implementation for riscv authored by Andy Polyakov. The file
'poly1305-riscv.pl' is taken straight from
https://github.com/dot-asm/cryptogams commit
5e3fba73576244708a752fa61a8e93e587f271bb. This patch was tested on
SpacemiT X60, with 2~2.5x improvement over generic implementation.
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Signed-off-by: Zhihang Shao <zhihang.shao.iscas@gmail.com>
[EB: ported to lib/crypto/riscv/]
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250829152513.92459-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Consolidate the Poly1305 code into a single module, similar to various
other algorithms (SHA-1, SHA-256, SHA-512, etc.):
- Each arch now provides a header file lib/crypto/$(SRCARCH)/poly1305.h,
replacing lib/crypto/$(SRCARCH)/poly1305*.c. The header defines
poly1305_block_init(), poly1305_blocks(), poly1305_emit(), and
optionally poly1305_mod_init_arch(). It is included by
lib/crypto/poly1305.c, and thus the code gets built into the single
libpoly1305 module, with improved inlining in some cases.
- Whether arch-optimized Poly1305 is buildable is now controlled
centrally by lib/crypto/Kconfig instead of by
lib/crypto/$(SRCARCH)/Kconfig. The conditions for enabling it remain
the same as before, and it remains enabled by default. (The PPC64 one
remains unconditionally disabled due to 'depends on BROKEN'.)
- Any additional arch-specific translation units for the optimized
Poly1305 code, such as assembly files, are now compiled by
lib/crypto/Makefile instead of lib/crypto/$(SRCARCH)/Makefile.
A special consideration is needed because the Adiantum code uses the
poly1305_core_*() functions directly. For now, just carry forward that
approach. This means retaining the CRYPTO_LIB_POLY1305_GENERIC kconfig
symbol, and keeping the poly1305_core_*() functions in separate
translation units. So it's not quite as streamlined I've done with the
other hash functions, but we still get a single libpoly1305 module.
Note: to see the diff from the arm, arm64, and x86 .c files to the new
.h files, view this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250829152513.92459-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Now that the minimum supported version of LLVM for building the kernel
has been bumped to 15.0.0, two KMSAN checks can be cleaned up.
CONFIG_HAVE_KMSAN_COMPILER will always be true when using clang so
remove the cc-option test and use a simple check for CONFIG_CC_IS_CLANG.
CONFIG_HAVE_KMSAN_PARAM_RETVAL will always be true so it can be removed
outright.
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250821-bump-min-llvm-ver-15-v2-12-635f3294e5f0@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Now that the minimum supported version of LLVM for building the kernel
has been bumped to 15.0.0, __no_kcsan will always ensure that the thread
sanitizer functions are not generated, so remove the check for tsan
functions in is_profiling_func() and the always true depends and
unnecessary select lines in KCSAN_WEAK_MEMORY.
Acked-by: Marco Elver <elver@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infraded.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250821-bump-min-llvm-ver-15-v2-11-635f3294e5f0@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Now that the minimum supported version of LLVM for building the kernel
has been bumped to 15.0.0, the CLANG_VERSION check for older than 14.0.0
is always false, so remove it.
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250821-bump-min-llvm-ver-15-v2-10-635f3294e5f0@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Drop 'inline' from all the *_mod_init_arch() functions so that the
compiler will warn about any bugs where they are unused due to not being
wired up properly. (There are no such bugs currently, so this just
establishes a more robust convention for the future. Of course, these
functions also tend to get inlined anyway, regardless of the keyword.)
Link: https://lore.kernel.org/r/20250816020457.432040-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add a KUnit test suite for the MD5 library functions, including the
corresponding HMAC support. The core test logic is in the
previously-added hash-test-template.h. This commit just adds the actual
KUnit suite, and it adds the generated test vectors to the tree so that
gen-hash-testvecs.py won't have to be run at build time.
Link: https://lore.kernel.org/r/20250805222855.10362-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Introduce example_params_test_with_init_dynamic_arr(). This new
KUnit test demonstrates directly assigning a dynamic parameter
array, using the kunit_register_params_array() macro, to a
parameterized test context.
It highlights the use of param_init() and param_exit() for
initialization and exit of a parameterized test, and their
registration to the test case with KUNIT_CASE_PARAM_WITH_INIT().
Link: https://lore.kernel.org/r/20250826091341.1427123-7-davidgow@google.com
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add example_params_test_with_init() to illustrate how to manage
shared resources across a parameterized KUnit test. This example
showcases the use of the new param_init() function and its registration
to a test using the KUNIT_CASE_PARAM_WITH_INIT() macro.
Additionally, the test demonstrates how to directly pass a parameter array
to the parameterized test context via kunit_register_params_array()
and leveraging the Resource API for shared resource management.
Link: https://lore.kernel.org/r/20250826091341.1427123-6-davidgow@google.com
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
KUnit parameterized tests currently support two primary methods f
or getting parameters:
1. Defining custom logic within a generate_params() function.
2. Using the KUNIT_ARRAY_PARAM() and KUNIT_ARRAY_PARAM_DESC()
macros with a pre-defined static array and passing
the created *_gen_params() to KUNIT_CASE_PARAM().
These methods present limitations when dealing with dynamically
generated parameter arrays, or in scenarios where populating parameters
sequentially via generate_params() is inefficient or overly complex.
This patch addresses these limitations by adding a new `params_array`
field to `struct kunit`, of the type `kunit_params`. The
`struct kunit_params` is designed to store the parameter array itself,
along with essential metadata including the parameter count, parameter
size, and a get_description() function for providing custom descriptions
for individual parameters.
The `params_array` field can be populated by calling the new
kunit_register_params_array() macro from within a param_init() function.
This will register the array as part of the parameterized test context.
The user will then need to pass kunit_array_gen_params() to the
KUNIT_CASE_PARAM_WITH_INIT() macro as the generator function, if not
providing their own. kunit_array_gen_params() is a KUnit helper that will
use the registered array to generate parameters.
The arrays passed to KUNIT_ARRAY_PARAM(,DESC) will also be registered to
the parameterized test context for consistency as well as for higher
availability of the parameter count that will be used for outputting a KTAP
test plan for a parameterized test.
This modification provides greater flexibility to the KUnit framework,
allowing testers to easily register and utilize both dynamic and static
parameter arrays.
Link: https://lore.kernel.org/r/20250826091341.1427123-5-davidgow@google.com
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
[Only output the test plan if using kunit_array_gen_params --David]
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
To enable more complex parameterized testing scenarios, the
generate_params() function needs additional context beyond just
the previously generated parameter. This patch modifies the
generate_params() function signature to include an extra
`struct kunit *test` argument, giving test users access to the
parameterized test context when generating parameters.
The `struct kunit *test` argument was added as the first parameter
to the function signature as it aligns with the convention of other
KUnit functions that accept `struct kunit *test` first. This also
mirrors the "this" or "self" reference found in object-oriented
programming languages.
This patch also modifies xe_pci_live_device_gen_param() in xe_pci.c
and nthreads_gen_params() in kcsan_test.c to reflect this signature
change.
Link: https://lore.kernel.org/r/20250826091341.1427123-4-davidgow@google.com
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Acked-by: Marco Elver <elver@google.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
[Catch some additional gen_params signatures in drm/xe/tests --David]
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add (*param_init) and (*param_exit) function pointers to
`struct kunit_case`. Users will be able to set them via the new
KUNIT_CASE_PARAM_WITH_INIT() macro.
param_init/exit will be invoked by kunit_run_tests() once before and once
after the parameterized test, respectively. They will receive the
`struct kunit` that holds the parameterized test context; facilitating
init and exit for shared state.
This patch also sets param_init/exit to None in rust/kernel/kunit.rs.
Link: https://lore.kernel.org/r/20250826091341.1427123-3-davidgow@google.com
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, KUnit parameterized tests lack a mechanism to share
resources across parameter runs because the same `struct kunit`
instance is cleaned up and reused for each run.
This patch introduces parameterized test context, enabling test
users to share resources between parameter runs. It also allows
setting up resources that need to be available for all parameter
runs only once, which is helpful in cases where setup is expensive.
To establish a parameterized test context, this patch adds a
parent pointer field to `struct kunit`. This allows resources added
to the parent `struct kunit` to be shared and accessible across all
parameter runs.
In kunit_run_tests(), the default `struct kunit` created is now
designated to act as the parameterized test context whenever a test
is parameterized.
Subsequently, a new `struct kunit` is made for each parameter run, and
its parent pointer is set to the `struct kunit` that holds the
parameterized test context.
Link: https://lore.kernel.org/r/20250826091341.1427123-2-davidgow@google.com
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Instead of exposing the sparc-optimized MD5 code via sparc-specific
crypto_shash algorithms, instead just implement the md5_blocks() library
function. This is much simpler, it makes the MD5 library functions be
sparc-optimized, and it fixes the longstanding issue where the
sparc-optimized MD5 code was disabled by default. MD5 still remains
available through crypto_shash, but individual architectures no longer
need to handle it.
Note: to see the diff from arch/sparc/crypto/md5_glue.c to
lib/crypto/sparc/md5.h, view this commit with 'git show -M10'.
Link: https://lore.kernel.org/r/20250805222855.10362-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the powerpc-optimized MD5 code via powerpc-specific
crypto_shash algorithms, instead just implement the md5_blocks() library
function. This is much simpler, it makes the MD5 library functions be
powerpc-optimized, and it fixes the longstanding issue where the
powerpc-optimized MD5 code was disabled by default. MD5 still remains
available through crypto_shash, but individual architectures no longer
need to handle it.
Link: https://lore.kernel.org/r/20250805222855.10362-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the mips-optimized MD5 code via mips-specific
crypto_shash algorithms, instead just implement the md5_blocks() library
function. This is much simpler, it makes the MD5 library functions be
mips-optimized, and it fixes the longstanding issue where the
mips-optimized MD5 code was disabled by default. MD5 still remains
available through crypto_shash, but individual architectures no longer
need to handle it.
Note: to see the diff from arch/mips/cavium-octeon/crypto/octeon-md5.c
to lib/crypto/mips/md5.h, view this commit with 'git show -M10'.
Link: https://lore.kernel.org/r/20250805222855.10362-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add library functions for MD5, including HMAC support. The MD5
implementation is derived from crypto/md5.c. This closely mirrors the
corresponding SHA-1 and SHA-2 changes.
Like SHA-1 and SHA-2, support for architecture-optimized MD5
implementations is included. I originally proposed dropping those, but
unfortunately there is an AF_ALG user of the PowerPC MD5 code
(https://lore.kernel.org/r/c4191597-341d-4fd7-bc3d-13daf7666c41@csgroup.eu/),
and dropping that code would be viewed as a performance regression. We
don't add new software algorithm implementations purely for AF_ALG, as
escalating to kernel mode merely to do calculations that could be done
in userspace is inefficient and is completely the wrong design. But
since this one already existed, it gets grandfathered in for now. An
objection was also raised to dropping the SPARC64 MD5 code because it
utilizes the CPU's direct support for MD5, although it remains unclear
that anyone is using that. Regardless, we'll keep these around for now.
Note that while MD5 is a legacy algorithm that is vulnerable to
practical collision attacks, it still has various in-kernel users that
implement legacy protocols. Switching to a simple library API, which is
the way the code should have been organized originally, will greatly
simplify their code. For example:
MD5:
drivers/md/dm-crypt.c (for lmk IV generation)
fs/nfsd/nfs4recover.c
fs/ecryptfs/
fs/smb/client/
net/{ipv4,ipv6}/ (for TCP-MD5 signatures)
HMAC-MD5:
fs/smb/client/
fs/smb/server/
(Also net/sctp/ if it continues using HMAC-MD5 for cookie generation.
However, that use case has the flexibility to upgrade to a more modern
algorithm, which I'll be proposing instead.)
As usual, the "md5" and "hmac(md5)" crypto_shash algorithms will also be
reimplemented on top of these library functions. For "hmac(md5)" this
will provide a faster, more streamlined implementation.
Link: https://lore.kernel.org/r/20250805222855.10362-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since sha512_kunit tests the fallback code paths without using
crypto_simd_disabled_for_test, make the SHA-512 code just use the
underlying may_use_simd() and irq_fpu_usable() functions directly
instead of crypto_simd_usable(). This eliminates an unnecessary layer.
Link: https://lore.kernel.org/r/20250731223651.136939-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since sha256_kunit tests the fallback code paths without using
crypto_simd_disabled_for_test, make the SHA-256 code just use the
underlying may_use_simd() and irq_fpu_usable() functions directly
instead of crypto_simd_usable(). This eliminates an unnecessary layer.
While doing this, also add likely() annotations, and fix a minor
inconsistency where the static keys in the sha256.h files were in a
different place than in the corresponding sha1.h and sha512.h files.
Link: https://lore.kernel.org/r/20250731223510.136650-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
__ubsan_handle_divrem_overflow() incorrectly uses the RHS to report.
It always reports the same log: division of -1 by -1. But it should
report division of LHS by -1.
Signed-off-by: Junhui Pei <paradoxskin233@gmail.com>
Fixes: c6d308534a ("UBSAN: run-time undefined behavior sanity checker")
Link: https://lore.kernel.org/r/20250602153841.62935-1-paradoxskin233@gmail.com
Signed-off-by: Kees Cook <kees@kernel.org>
Fix a regression where 'make clean' stopped removing some of the
generated assembly files on arm and arm64.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaKaR/xQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK486AP4z3+DbFNj3WHLA/O3uFxgR4eiUW9tl
gVtzslK5j2rxLwEAuOrY0qAhzX2dJ0/KN6y7T1qtOEZoGIZ2j85HDvMh3wU=
=d+ja
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
"Fix a regression where 'make clean' stopped removing some of the
generated assembly files on arm and arm64"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: ensure generated *.S files are removed on make clean
lib/crypto: sha: Update Kconfig help for SHA1 and SHA256
The NEED_* macros do an implicit goto in case the safety bounds checks
fail. Add the unlikely hints as this is the error case and not a hot
path. The final assembly is slightly shorter and some jumps got
reordered according to the hints.
text data bss dec hex filename
2294 16 0 2310 906 pre/lzo1x_decompress_safe.o
2277 16 0 2293 8f5 post/lzo1x_decompress_safe.o
text data bss dec hex filename
3444 48 0 3492 da4 pre/lzo1x_compress_safe.o
3372 48 0 3420 d5c post/lzo1x_compress_safe.o
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop 'inline' from all the *_mod_init_arch() functions so that the
compiler will warn about any bugs where they are unused due to not being
wired up properly. (There are no such bugs currently, so this just
establishes a more robust convention for the future. Of course, these
functions also tend to get inlined anyway, regardless of the keyword.)
Link: https://lore.kernel.org/r/20250816020240.431545-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
For kbuild to properly clean up these build artifacts in the subdirectory,
even after CONFIG_KUNIT changed do disabled, the directory needs to be
processed always.
Pushing the special logic for hook.o into the kunit Makefile also makes the
logic easier to understand.
Link: https://lore.kernel.org/r/20250813-kunit-always-descend-v1-1-7bbd387ff13b@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
make clean does not check the kernel config when removing files. As
such, additions to clean-files under CONFIG_ARM or CONFIG_ARM64 are not
evaluated. For example, when building on arm64, this means that
lib/crypto/arm64/sha{256,512}-core.S are left over after make clean.
Set clean-files unconditionally to ensure that make clean removes these
files.
Fixes: e96cb9507f ("lib/crypto: sha256: Consolidate into single module")
Fixes: 24c91b62ac ("lib/crypto: arm/sha512: Migrate optimized SHA-512 code to library")
Fixes: 60e3f1e9b7 ("lib/crypto: arm64/sha512: Migrate optimized SHA-512 code to library")
Signed-off-by: Tal Zussman <tz2294@columbia.edu>
Link: https://lore.kernel.org/r/20250814-crypto_clean-v2-1-659a2dc86302@columbia.edu
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Current release - regressions:
- netfilter: nft_set_pipapo:
- don't return bogus extension pointer
- fix null deref for empty set
Current release - new code bugs:
- core: prevent deadlocks when enabling NAPIs with mixed kthread config
- eth: netdevsim: Fix wild pointer access in nsim_queue_free().
Previous releases - regressions:
- page_pool: allow enabling recycling late, fix false positive warning
- sched: ets: use old 'nbands' while purging unused classes
- xfrm:
- restore GSO for SW crypto
- bring back device check in validate_xmit_xfrm
- tls: handle data disappearing from under the TLS ULP
- ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
- eth: bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
- eth: hv_netvsc: fix panic during namespace deletion with VF
Previous releases - always broken:
- netfilter: fix refcount leak on table dump
- vsock: do not allow binding to VMADDR_PORT_ANY
- sctp: linearize cloned gso packets in sctp_rcv
- eth: hibmcge: fix the division by zero issue
- eth: microchip: fix KSZ8863 reset problem
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Ydk1
-----END PGP SIGNATURE-----
Merge tag 'net-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Netfilter and IPsec.
Current release - regressions:
- netfilter: nft_set_pipapo:
- don't return bogus extension pointer
- fix null deref for empty set
Current release - new code bugs:
- core: prevent deadlocks when enabling NAPIs with mixed kthread
config
- eth: netdevsim: Fix wild pointer access in nsim_queue_free().
Previous releases - regressions:
- page_pool: allow enabling recycling late, fix false positive
warning
- sched: ets: use old 'nbands' while purging unused classes
- xfrm:
- restore GSO for SW crypto
- bring back device check in validate_xmit_xfrm
- tls: handle data disappearing from under the TLS ULP
- ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
- eth:
- bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
- hv_netvsc: fix panic during namespace deletion with VF
Previous releases - always broken:
- netfilter: fix refcount leak on table dump
- vsock: do not allow binding to VMADDR_PORT_ANY
- sctp: linearize cloned gso packets in sctp_rcv
- eth:
- hibmcge: fix the division by zero issue
- microchip: fix KSZ8863 reset problem"
* tag 'net-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
net: usb: asix_devices: add phy_mask for ax88772 mdio bus
net: kcm: Fix race condition in kcm_unattach()
selftests: net/forwarding: test purge of active DWRR classes
net/sched: ets: use old 'nbands' while purging unused classes
bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
netdevsim: Fix wild pointer access in nsim_queue_free().
net: mctp: Fix bad kfree_skb in bind lookup test
netfilter: nf_tables: reject duplicate device on updates
ipvs: Fix estimator kthreads preferred affinity
netfilter: nft_set_pipapo: fix null deref for empty set
selftests: tls: test TCP stealing data from under the TLS socket
tls: handle data disappearing from under the TLS ULP
ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
ixgbe: prevent from unwanted interface name changes
devlink: let driver opt out of automatic phys_port_name generation
net: prevent deadlocks when enabling NAPIs with mixed kthread config
net: update NAPI threaded config even for disabled NAPIs
selftests: drv-net: don't assume device has only 2 queues
docs: Fix name for net.ipv4.udp_child_hash_entries
riscv: dts: thead: Add APB clocks for TH1520 GMACs
...
As Kees points out, this is a kernel address leak, and debugging is
not a sufficiently good reason to expose the real kernel address.
Fixes: 65b584f536 ("ref_tracker: automatically register a file in debugfs for a ref_tracker_dir")
Reported-by: Kees Cook <kees@kernel.org>
Closes: https://lore.kernel.org/netdev/202507301603.62E553F93@keescook/
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since crc_kunit now tests the fallback code paths without using
crypto_simd_disabled_for_test, make the CRC code just use the underlying
may_use_simd() and irq_fpu_usable() functions directly instead of
crypto_simd_usable(). This eliminates an unnecessary layer.
Take the opportunity to add likely() and unlikely() annotations as well.
Link: https://lore.kernel.org/r/20250811182631.376302-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Test that if CRCs are computed in task, softirq, and hardirq context
concurrently, then all results are as expected. Implement this using
kunit_run_irq_test() which is also used by the lib/crypto/ tests.
As with the corresponding lib/crypto/ tests, the purpose of this is to
test fallback code paths and to exercise edge cases in the
architecture's support for in-kernel FPU/SIMD/vector.
Remove the code from crc_test() that sometimes disabled interrupts, as
that was just an incomplete attempt to achieve similar test coverage.
Link: https://lore.kernel.org/r/20250811182631.376302-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EQ7g
-----END PGP SIGNATURE-----
Merge tag 'block-6.17-20250808' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- MD pull request via Yu:
- mddev null-ptr-dereference fix, by Erkun
- md-cluster fail to remove the faulty disk regression fix, by
Heming
- minor cleanup, by Li Nan and Jinchao
- mdadm lifetime regression fix reported by syzkaller, by Yu Kuai
- MD pull request via Christoph
- add support for getting the FDP featuee in fabrics passthru path
(Nitesh Shetty)
- add capability to connect to an administrative controller
(Kamaljit Singh)
- fix a leak on sgl setup error (Keith Busch)
- initialize discovery subsys after debugfs is initialized
(Mohamed Khalfella)
- fix various comment typos (Bjorn Helgaas)
- remove unneeded semicolons (Jiapeng Chong)
- nvmet debugfs ordering issue fix
- Fix UAF in the tag_set in zloop
- Ensure sbitmap shallow depth covers entire set
- Reduce lock roundtrips in io context lookup
- Move scheduler tags alloc/free out of elevator and freeze lock, to
fix some lockdep found issues
- Improve robustness of queue limits checking
- Fix a regression with IO priorities, if no io context exists
* tag 'block-6.17-20250808' of git://git.kernel.dk/linux: (26 commits)
lib/sbitmap: make sbitmap_get_shallow() internal
lib/sbitmap: convert shallow_depth from one word to the whole sbitmap
nvmet: exit debugfs after discovery subsystem exits
block, bfq: Reorder struct bfq_iocq_bfqq_data
md: make rdev_addable usable for rcu mode
md/raid1: remove struct pool_info and related code
md/raid1: change r1conf->r1bio_pool to a pointer type
block: ensure discard_granularity is zero when discard is not supported
zloop: fix KASAN use-after-free of tag set
block: Fix default IO priority if there is no IO context
nvme: fix various comment typos
nvme-auth: remove unneeded semicolon
nvme-pci: fix leak on sgl setup error
nvmet: initialize discovery subsys after debugfs is initialized
nvme: add capability to connect to an administrative controller
nvmet: add support for FDP in fabrics passthru path
md: rename recovery_cp to resync_offset
md/md-cluster: handle REMOVE message earlier
md: fix create on open mddev lifetime regression
block: fix potential deadlock while running nr_hw_queue update
...
Because it's only used in sbitmap.c
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250807032413.1469456-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently elevators will record internal 'async_depth' to throttle
asynchronous requests, and they both calculate shallow_dpeth based on
sb->shift, with the respect that sb->shift is the available tags in one
word.
However, sb->shift is not the availbale tags in the last word, see
__map_depth:
if (index == sb->map_nr - 1)
return sb->depth - (index << sb->shift);
For consequence, if the last word is used, more tags can be get than
expected, for example, assume nr_requests=256 and there are four words,
in the worst case if user set nr_requests=32, then the first word is
the last word, and still use bits per word, which is 64, to calculate
async_depth is wrong.
One the ohter hand, due to cgroup qos, bfq can allow only one request
to be allocated, and set shallow_dpeth=1 will still allow the number
of words request to be allocated.
Fix this problems by using shallow_depth to the whole sbitmap instead
of per word, also change kyber, mq-deadline and bfq to follow this,
a new helper __map_depth_with_shallow() is introduced to calculate
available bits in each word.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250807032413.1469456-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=Mocd
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Add new "hash_pointers=[auto|always|never]" boot parameter to force
the hashing even with "slab_debug" enabled
- Allow to stop CPU, after losing nbcon console ownership during
panic(), even without proper NMI
- Allow to use the printk kthread immediately even for the 1st
registered nbcon
- Compiler warning removal
* tag 'printk-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: nbcon: Allow reacquire during panic
printk: Allow to use the printk kthread immediately even for 1st nbcon
slab: Decouple slab_debug and no_hash_pointers
vsprintf: Use __diag macros to disable '-Wsuggest-attribute=format'
compiler-gcc.h: Introduce __diag_GCC_all
- The 2 patch series "squashfs: Remove page->mapping references" from
Matthew Wilcox gets us closer to being able to remove page->mapping.
- The 5 patch series "relayfs: misc changes" from Jason Xing does some
maintenance and minor feature addition work in relayfs.
- The 5 patch series "kdump: crashkernel reservation from CMA" from Jiri
Bohac switches us from static preallocation of the kdump crashkernel's
working memory over to dynamic allocation. So the difficulty of
a-priori estimation of the second kernel's needs is removed and the
first kernel obtains extra memory.
- The 5 patch series "generalize panic_print's dump function to be used
by other kernel parts" from Feng Tang implements some consolidation and
rationalizatio of the various ways in which a faiing kernel splats
information at the operator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaI+82gAKCRDdBJ7gKXxA
jj4JAP9xb+w9DrBY6sa+7KTPIb+aTqQ7Zw3o9O2m+riKQJv6jAEA6aEwRnDA0451
fDT5IqVlCWGvnVikdZHSnvhdD7TGsQ0=
=rT71
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "squashfs: Remove page->mapping references" (Matthew Wilcox) gets
us closer to being able to remove page->mapping
- "relayfs: misc changes" (Jason Xing) does some maintenance and
minor feature addition work in relayfs
- "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches
us from static preallocation of the kdump crashkernel's working
memory over to dynamic allocation. So the difficulty of a-priori
estimation of the second kernel's needs is removed and the first
kernel obtains extra memory
- "generalize panic_print's dump function to be used by other
kernel parts" (Feng Tang) implements some consolidation and
rationalization of the various ways in which a failing kernel
splats information at the operator
* tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits)
tools/getdelays: add backward compatibility for taskstats version
kho: add test for kexec handover
delaytop: enhance error logging and add PSI feature description
samples: Kconfig: fix spelling mistake "instancess" -> "instances"
fat: fix too many log in fat_chain_add()
scripts/spelling.txt: add notifer||notifier to spelling.txt
xen/xenbus: fix typo "notifer"
net: mvneta: fix typo "notifer"
drm/xe: fix typo "notifer"
cxl: mce: fix typo "notifer"
KVM: x86: fix typo "notifer"
MAINTAINERS: add maintainers for delaytop
ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
ucount: fix atomic_long_inc_below() argument type
kexec: enable CMA based contiguous allocation
stackdepot: make max number of pools boot-time configurable
lib/xxhash: remove unused functions
init/Kconfig: restore CONFIG_BROKEN help text
lib/raid6: update recov_rvv.c zero page usage
docs: update docs after introducing delaytop
...
to use the module data structures in combination with the already no-op stub
module functions, even when support for modules is disabled in the kernel
configuration. This change follows the kernel's coding style for conditional
compilation and allows kunit code to drop all CONFIG_MODULES ifdefs, which is
also part of the changes. This should allow others part of the kernel to do the
same cleanup.
Note that this had a conflict with sysctl changes [1] but should be fixed now as I
rebased on top.
The remaining changes include a fix for module name length handling which could
potentially lead to the removal of an incorrect module, and various cleanups.
The module name fix and related cleanup has been in linux-next since Thursday
(July 31) while the rest of the changes for a bit more than 3 weeks.
Note that this currently has conflicts in next with kbuild's tree [2].
Link: https://lore.kernel.org/all/20250714175916.774e6d79@canb.auug.org.au/ [1]
Link: https://lore.kernel.org/all/20250801132941.6815d93d@canb.auug.org.au/ [2]
-----BEGIN PGP SIGNATURE-----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=4bGB
-----END PGP SIGNATURE-----
Merge tag 'modules-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module updates from Daniel Gomez:
"This is a small set of changes for modules, primarily to extend module
users to use the module data structures in combination with the
already no-op stub module functions, even when support for modules is
disabled in the kernel configuration. This change follows the kernel's
coding style for conditional compilation and allows kunit code to drop
all CONFIG_MODULES ifdefs, which is also part of the changes. This
should allow others part of the kernel to do the same cleanup.
The remaining changes include a fix for module name length handling
which could potentially lead to the removal of an incorrect module,
and various cleanups"
* tag 'modules-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
module: Rename MAX_PARAM_PREFIX_LEN to __MODULE_NAME_LEN
tracing: Replace MAX_PARAM_PREFIX_LEN with MODULE_NAME_LEN
module: Restore the moduleparam prefix length check
module: Remove unnecessary +1 from last_unloaded_module::name size
module: Prevent silent truncation of module name in delete_module(2)
kunit: test: Drop CONFIG_MODULE ifdeffery
module: make structure definitions always visible
module: move 'struct module_use' to internal.h
Testing kexec handover requires a kernel driver that will generate some
data and preserve it with KHO on the first boot and then restore that data
and verify it was preserved properly after kexec.
To facilitate such test, along with the kernel driver responsible for data
generation, preservation and restoration add a script that runs a kernel
in a VM with a minimal /init. The /init enables KHO, loads a kernel image
for kexec and runs kexec reboot. After the boot of the kexeced kernel,
the driver verifies that the data was properly preserved.
[rppt@kernel.org: fix section mismatch]
Link: https://lkml.kernel.org/r/aIiRC8fXiOXKbPM_@kernel.org
Link: https://lkml.kernel.org/r/20250727083733.2590139-1-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Changyuan Lyu <changyuanl@google.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We're hitting the WARN in depot_init_pool() about reaching the stack depot
limit because we have long stacks that don't dedup very well.
Introduce a new start-up parameter to allow users to set the number of
maximum stack depot pools.
Link: https://lkml.kernel.org/r/20250718153928.94229-1-matt@readmodwrite.com
Signed-off-by: Matt Fleming <mfleming@cloudflare.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
xxh32_digest() and xxh32_update() were added in 2017 in the original
xxhash commit, but have remained unused.
Remove them.
Link: https://lkml.kernel.org/r/20250716133245.243363-1-linux@treblig.org
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Dave Gilbert <linux@treblig.org>
Cc: Nick Terrell <terrelln@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- The 4 patch series "mm: ksm: prevent KSM from breaking merging of new
VMAs" from Lorenzo Stoakes addresses an issue with KSM's
PR_SET_MEMORY_MERGE mode: newly mapped VMAs were not eligible for
merging with existing adjacent VMAs.
- The 4 patch series "mm/damon: introduce DAMON_STAT for simple and
practical access monitoring" from SeongJae Park adds a new kernel module
which simplifies the setup and usage of DAMON in production
environments.
- The 6 patch series "stop passing a writeback_control to swap/shmem
writeout" from Christoph Hellwig is a cleanup to the writeback code
which removes a couple of pointers from struct writeback_control.
- The 7 patch series "drivers/base/node.c: optimization and cleanups"
from Donet Tom contains largely uncorrelated cleanups to the NUMA node
setup and management code.
- The 4 patch series "mm: userfaultfd: assorted fixes and cleanups" from
Tal Zussman does some maintenance work on the userfaultfd code.
- The 5 patch series "Readahead tweaks for larger folios" from Ryan
Roberts implements some tuneups for pagecache readahead when it is
reading into order>0 folios.
- The 4 patch series "selftests/mm: Tweaks to the cow test" from Mark
Brown provides some cleanups and consistency improvements to the
selftests code.
- The 4 patch series "Optimize mremap() for large folios" from Dev Jain
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
- The 5 patch series "Remove zero_user()" from Matthew Wilcox expunges
zero_user() in favor of the more modern memzero_page().
- The 3 patch series "mm/huge_memory: vmf_insert_folio_*() and
vmf_insert_pfn_pud() fixes" from David Hildenbrand addresses some warts
which David noticed in the huge page code. These were not known to be
causing any issues at this time.
- The 3 patch series "mm/damon: use alloc_migrate_target() for
DAMOS_MIGRATE_{HOT,COLD" from SeongJae Park provides some cleanup and
consolidation work in DAMON.
- The 3 patch series "use vm_flags_t consistently" from Lorenzo Stoakes
uses vm_flags_t in places where we were inappropriately using other
types.
- The 3 patch series "mm/memfd: Reserve hugetlb folios before
allocation" from Vivek Kasireddy increases the reliability of large page
allocation in the memfd code.
- The 14 patch series "mm: Remove pXX_devmap page table bit and pfn_t
type" from Alistair Popple removes several now-unneeded PFN_* flags.
- The 5 patch series "mm/damon: decouple sysfs from core" from SeongJae
Park implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
- The 5 patch series "madvise cleanup" from Lorenzo Stoakes does quite a
lot of cleanup/maintenance work in the madvise() code.
- The 4 patch series "madvise anon_name cleanups" from Vlastimil Babka
provides additional cleanups on top or Lorenzo's effort.
- The 11 patch series "Implement numa node notifier" from Oscar Salvador
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory on/offline
notifier.
- The 6 patch series "Make MIGRATE_ISOLATE a standalone bit" from Zi Yan
cleans up the pageblock isolation code and fixes a potential issue which
doesn't seem to cause any problems in practice.
- The 5 patch series "selftests/damon: add python and drgn based DAMON
sysfs functionality tests" from SeongJae Park adds additional drgn- and
python-based DAMON selftests which are more comprehensive than the
existing selftest suite.
- The 5 patch series "Misc rework on hugetlb faulting path" from Oscar
Salvador fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
- The 3 patch series "cma: factor out allocation logic from
__cma_declare_contiguous_nid" from Mike Rapoport rationalizes and cleans
up the highmem-specific code in the CMA allocator.
- The 28 patch series "mm/migration: rework movable_ops page migration
(part 1)" from David Hildenbrand provides cleanups and
future-preparedness to the migration code.
- The 2 patch series "mm/damon: add trace events for auto-tuned
monitoring intervals and DAMOS quota" from SeongJae Park adds some
tracepoints to some DAMON auto-tuning code.
- The 6 patch series "mm/damon: fix misc bugs in DAMON modules" from
SeongJae Park does that.
- The 6 patch series "mm/damon: misc cleanups" from SeongJae Park also
does what it claims.
- The 4 patch series "mm: folio_pte_batch() improvements" from David
Hildenbrand cleans up the large folio PTE batching code.
- The 13 patch series "mm/damon/vaddr: Allow interleaving in
migrate_{hot,cold} actions" from SeongJae Park facilitates dynamic
alteration of DAMON's inter-node allocation policy.
- The 3 patch series "Remove unmap_and_put_page()" from Vishal Moola
provides a couple of page->folio conversions.
- The 4 patch series "mm: per-node proactive reclaim" from Davidlohr
Bueso implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
- The 14 patch series "mm/damon: remove damon_callback" from SeongJae
Park replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
- The 10 patch series "mm/mremap: permit mremap() move of multiple VMAs"
from Lorenzo Stoakes implements a number of mremap cleanups (of course)
in preparation for adding new mremap() functionality: newly permit the
remapping of multiple VMAs when the user is specifying MREMAP_FIXED. It
still excludes some specialized situations where this cannot be
performed reliably.
- The 3 patch series "drop hugetlb_free_pgd_range()" from Anthony Yznaga
switches some sparc hugetlb code over to the generic version and removes
the thus-unneeded hugetlb_free_pgd_range().
- The 4 patch series "mm/damon/sysfs: support periodic and automated
stats update" from SeongJae Park augments the present
userspace-requested update of DAMON sysfs monitoring files. Automatic
update is now provided, along with a tunable to control the update
interval.
- The 4 patch series "Some randome fixes and cleanups to swapfile" from
Kemeng Shi does what is claims.
- The 4 patch series "mm: introduce snapshot_page" from Luiz Capitulino
and David Hildenbrand provides (and uses) a means by which debug-style
functions can grab a copy of a pageframe and inspect it locklessly
without tripping over the races inherent in operating on the live
pageframe directly.
- The 6 patch series "use per-vma locks for /proc/pid/maps reads" from
Suren Baghdasaryan addresses the large contention issues which can be
triggered by reads from that procfs file. Latencies are reduced by more
than half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
- The 6 patch series "__folio_split() clean up" from Zi Yan cleans up
__folio_split()!
- The 7 patch series "Optimize mprotect() for large folios" from Dev
Jain provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
- The 2 patch series "selftests/mm: reuse FORCE_READ to replace "asm
volatile("" : "+r" (XXX));" and some cleanup" from wang lian does some
cleanup work in the selftests code.
- The 3 patch series "tools/testing: expand mremap testing" from Lorenzo
Stoakes extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
- The 22 patch series "selftests/damon/sysfs.py: test all parameters"
from SeongJae Park extends the DAMON sysfs interface selftest so that it
tests all possible user-requested parameters. Rather than the present
minimal subset.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaIqcCgAKCRDdBJ7gKXxA
jkVBAQCCn9DR1QP0CRk961ot0cKzOgioSc0aA03DPb2KXRt2kQEAzDAz0ARurFhL
8BzbvI0c+4tntHLXvIlrC33n9KWAOQM=
=XsFy
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
The definitions of GENMASK() and GENMASK_ULL() do not depend any more
on __GENMASK() and __GENMASK_ULL(). Duplicate the existing unit tests
so that __GENMASK{,ULL}() are still covered.
Because __GENMASK() and __GENMASK_ULL() do use GENMASK_INPUT_CHECK(),
drop the TEST_GENMASK_FAILURES negative tests.
It would be good to have a small assembly test case for GENMASK*() in
case somebody decides to unify both in the future. However, I lack
expertise in assembly to do so. Instead add a FIXME message to
highlight the absence of the asm unit test.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
The function stubs exposed by module.h allow the code to compile properly
without the ifdeffery. The generated object code stays the same, as the
compiler can optimize away all the dead code.
As the code is still typechecked developer errors can be detected faster.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://lore.kernel.org/r/20250711-kunit-ifdef-modules-v2-3-39443decb1f8@linutronix.de
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Core & protocols
----------------
- Wrap datapath globals into net_aligned_data, to avoid false sharing.
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container).
- Add SO_INQ and SCM_INQ support to AF_UNIX.
- Add SIOCINQ support to AF_VSOCK.
- Add TCP_MAXSEG sockopt to MPTCP.
- Add IPv6 force_forwarding sysctl to enable forwarding per interface.
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB.
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users.
- Convert TCP send queue handling from tasklet to BH workque.
- Improve BPF iteration over TCP sockets to see each socket exactly once.
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code.
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel NAPI
thread when threaded NAPI gets disabled. Previously thread would stick
around until ifdown due to tricky synchronization.
- Allow multicast routing to take effect on locally-generated packets.
- Add output interface argument for End.X in segment routing.
- MCTP: add support for gateway routing, improve bind() handling.
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink.
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed.
- Support NUD_PERMANENT for proxy neighbor entries.
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM.
- Add sequence numbers to netconsole messages. Unregister netconsole's
console when all net targets are removed. Code refactoring.
Add a number of selftests.
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup.
- Support inspecting ref_tracker state via DebugFS.
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links.
- Allow providing upcall pid for the 'execute' command in openvswitch.
- Remove DCCP support from Netfilter's conntrack.
- Disallow multiple packet duplications in the queuing layer.
- Prevent use of deprecated iptables code on PREEMPT_RT.
Driver API
----------
- Support RSS and hashing configuration over ethtool Netlink.
- Add dedicated ethtool callbacks for getting and setting hashing fields.
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc.
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs.
- Support traffic classes in devlink rate API for bandwidth management.
- Remove rtnl_lock dependency from UDP tunnel port configuration.
Device drivers
--------------
- Add a new Broadcom driver for 800G Ethernet (bnge).
- Add a standalone driver for Microchip ZL3073x DPLL.
- Remove IBM's NETIUCV device driver.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is used
by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=lqbe
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
* Move sysctls out of the kern_table array
This is the final move of ctl_tables into their respective subsystems. Only 5
(out of the original 50) will remain in kernel/sysctl.c file; these handle
either sysctl or common arch variables.
By decentralizing sysctl registrations, subsystem maintainers regain control
over their sysctl interfaces, improving maintainability and reducing the
likelihood of merge conflicts.
* docs: Remove false positives from check-sysctl-docs
Stopped falsely identifying sysctls as undocumented or unimplemented in the
check-sysctl-docs script. This script can now be used to automatically
identify if documentation is missing.
* Testing
All these have been in linux-next since rc3, giving them a solid 3 to 4 weeks
worth of testing. Additionally, sysctl selftests and kunit were also run
locally on my x86_64
-----BEGIN PGP SIGNATURE-----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=R369
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Move sysctls out of the kern_table array
This is the final move of ctl_tables into their respective
subsystems. Only 5 (out of the original 50) will remain in
kernel/sysctl.c file; these handle either sysctl or common arch
variables.
By decentralizing sysctl registrations, subsystem maintainers regain
control over their sysctl interfaces, improving maintainability and
reducing the likelihood of merge conflicts.
- docs: Remove false positives from check-sysctl-docs
Stopped falsely identifying sysctls as undocumented or unimplemented
in the check-sysctl-docs script. This script can now be used to
automatically identify if documentation is missing.
* tag 'sysctl-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (23 commits)
docs: Downgrade arm64 & riscv from titles to comment
docs: Replace spaces with tabs in check-sysctl-docs
docs: Remove colon from ctltable title in vm.rst
docs: Add awk section for ucount sysctl entries
docs: Use skiplist when checking sysctl admin-guide
docs: nixify check-sysctl-docs
sysctl: rename kern_table -> sysctl_subsys_table
kernel/sys.c: Move overflow{uid,gid} sysctl into kernel/sys.c
uevent: mv uevent_helper into kobject_uevent.c
sysctl: Removed unused variable
sysctl: Nixify sysctl.sh
sysctl: Remove superfluous includes from kernel/sysctl.c
sysctl: Remove (very) old file changelog
sysctl: Move sysctl_panic_on_stackoverflow to kernel/panic.c
sysctl: move cad_pid into kernel/pid.c
sysctl: Move tainted ctl_table into kernel/panic.c
Input: sysrq: mv sysrq into drivers/tty/sysrq.c
fork: mv threads-max into kernel/fork.c
parisc/power: Move soft-power into power.c
mm: move randomize_va_space into memory.c
...
- Standardize on the __ASSEMBLER__ macro that is provided by GCC
and Clang compilers and replace __ASSEMBLY__ with __ASSEMBLER__
in both uapi and non-uapi headers
- Explicitly include <linux/export.h> in architecture and driver
files which contain an EXPORT_SYMBOL() and remove the include
from the files which do not contain the EXPORT_SYMBOL()
- Use the full title of "z/Architecture Principles of Operation"
manual and the name of a section where facility bits are listed
- Use -D__DISABLE_EXPORTS for files in arch/s390/boot to avoid
unnecessary slowing down of the build and confusing external
kABI tools that process symtypes data
- Print additional unrecoverable machine check information to make
the root cause analysis easier
- Move cmpxchg_user_key() handling to uaccess library code, since
the generated code is large anyway and there is no benefit if it
is inlined
- Fix a problem when cmpxchg_user_key() is executing a code with a
non-default key: if a system is IPL-ed with "LOAD NORMAL", and
the previous system used storage keys where the fetch-protection
bit was set for some pages, and the cmpxchg_user_key() is located
within such page, a protection exception happens
- Either the external call or emergency signal order is used to send
an IPI to a remote CPU. Use the external order only, since it is at
least as good and sometimes even better, than the emergency signal
- In case of an early crash the early program check handler prints
more or less random value of the last breaking event address, since
it is not initialized properly. Copy the last breaking event address
from the lowcore to pt_regs to address this
- During STP synchronization check udelay() can not be used, since the
first CPU modifies tod_clock_base and get_tod_clock_monotonic() might
return a non-monotonic time. Instead, busy-loop on other CPUs, while
the the first CPU actually handles the synchronization operation
- When debugging the early kernel boot using QEMU with the -S flag and
GDB attached, skip the decompressor and start directly in kernel
- Rename PAI Crypto event 4210 according to z16 and z17 "z/Architecture
Principles of Operation" manual
- Remove the in-kernel time steering support in favour of the new s390
PTP driver, which allows the kernel clock steered more precisely
- Remove a possible false-positive warning in pte_free_defer(), which
could be triggered in a valid case KVM guest process is initializing
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCaIJQThccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8FI2APwPnlrj6ZVXzNA6dw0fSUt697rS
NlaHEORXL8KcfoQh8QD/WwHUe1VNtDG1R5bBn0guR+UytVgR9Tt7LxyKfIgT3ws=
=tdMb
-----END PGP SIGNATURE-----
Merge tag 's390-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Standardize on the __ASSEMBLER__ macro that is provided by GCC and
Clang compilers and replace __ASSEMBLY__ with __ASSEMBLER__ in both
uapi and non-uapi headers
- Explicitly include <linux/export.h> in architecture and driver files
which contain an EXPORT_SYMBOL() and remove the include from the
files which do not contain the EXPORT_SYMBOL()
- Use the full title of "z/Architecture Principles of Operation" manual
and the name of a section where facility bits are listed
- Use -D__DISABLE_EXPORTS for files in arch/s390/boot to avoid
unnecessary slowing down of the build and confusing external kABI
tools that process symtypes data
- Print additional unrecoverable machine check information to make the
root cause analysis easier
- Move cmpxchg_user_key() handling to uaccess library code, since the
generated code is large anyway and there is no benefit if it is
inlined
- Fix a problem when cmpxchg_user_key() is executing a code with a
non-default key: if a system is IPL-ed with "LOAD NORMAL", and the
previous system used storage keys where the fetch-protection bit was
set for some pages, and the cmpxchg_user_key() is located within such
page, a protection exception happens
- Either the external call or emergency signal order is used to send an
IPI to a remote CPU. Use the external order only, since it is at
least as good and sometimes even better, than the emergency signal
- In case of an early crash the early program check handler prints more
or less random value of the last breaking event address, since it is
not initialized properly. Copy the last breaking event address from
the lowcore to pt_regs to address this
- During STP synchronization check udelay() can not be used, since the
first CPU modifies tod_clock_base and get_tod_clock_monotonic() might
return a non-monotonic time. Instead, busy-loop on other CPUs, while
the the first CPU actually handles the synchronization operation
- When debugging the early kernel boot using QEMU with the -S flag and
GDB attached, skip the decompressor and start directly in kernel
- Rename PAI Crypto event 4210 according to z16 and z17 "z/Architecture
Principles of Operation" manual
- Remove the in-kernel time steering support in favour of the new s390
PTP driver, which allows the kernel clock steered more precisely
- Remove a possible false-positive warning in pte_free_defer(), which
could be triggered in a valid case KVM guest process is initializing
* tag 's390-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (29 commits)
s390/mm: Remove possible false-positive warning in pte_free_defer()
s390/stp: Default to enabled
s390/stp: Remove leap second support
s390/time: Remove in-kernel time steering
s390/sclp: Use monotonic clock in sclp_sync_wait()
s390/smp: Use monotonic clock in smp_emergency_stop()
s390/time: Use monotonic clock in get_cycles()
s390/pai_crypto: Rename PAI Crypto event 4210
scripts/gdb/symbols: make lx-symbols skip the s390 decompressor
s390/boot: Introduce jump_to_kernel() function
s390/stp: Remove udelay from stp_sync_clock()
s390/early: Copy last breaking event address to pt_regs
s390/smp: Remove conditional emergency signal order code usage
s390/uaccess: Merge cmpxchg_user_key() inline assemblies
s390/uaccess: Prevent kprobes on cmpxchg_user_key() functions
s390/uaccess: Initialize code pages executed with non-default access key
s390/skey: Provide infrastructure for executing with non-default access key
s390/uaccess: Make cmpxchg_user_key() library code
s390/page: Add memory clobber to page_set_storage_key()
s390/page: Cleanup page_set_storage_key() inline assemblies
...
Core scheduler changes:
- Better tracking of maximum lag of tasks in presence of different
slices duration, for better handling of lag in the fair
scheduler. (Vincent Guittot)
- Clean up and standardize #if/#else/#endif markers throughout
the entire scheduler code base (Ingo Molnar)
- Make SMP unconditional: build the SMP scheduler's
data structures and logic on UP kernel too, even though
they are not used, to simplify the scheduler and remove
around 200 #ifdef/[#else]/#endif blocks from the
scheduler. (Ingo Molnar)
- Reorganize cgroup bandwidth control interface handling
for better interfacing with sched_ext (Tejun Heo)
Balancing:
- Bump sd->max_newidle_lb_cost when newidle balance fails (Chris Mason)
- Remove sched_domain_topology_level::flags to simplify the code (Prateek Nayak)
- Simplify and clean up build_sched_topology() (Li Chen)
- Optimize build_sched_topology() on large machines (Li Chen)
Real-time scheduling:
- Add initial version of proxy execution: a mechanism for mutex-owning
tasks to inherit the scheduling context of higher priority waiters.
Currently limited to a single runqueue and conditional on CONFIG_EXPERT,
and other limitations. (John Stultz, Peter Zijlstra, Valentin Schneider)
- Deadline scheduler (Juri Lelli):
- Fix dl_servers initialization order (Juri Lelli)
- Fix DL scheduler's root domain reinitialization logic (Juri Lelli)
- Fix accounting bugs after global limits change (Juri Lelli)
- Fix scalability regression by implementing less agressive dl_server handling
(Peter Zijlstra)
PSI:
- Improve scalability by optimizing psi_group_change() cpu_clock() usage
(Peter Zijlstra)
Rust changes:
- Make Task, CondVar and PollCondVar methods inline to avoid unnecessary
function calls (Kunwu Chan, Panagiotis Foliadis)
- Add might_sleep() support for Rust code: Rust's "#[track_caller]"
mechanism is used so that Rust's might_sleep() doesn't need to be
defined as a macro (Fujita Tomonori)
- Introduce file_from_location() (Boqun Feng)
Debugging & instrumentation:
- Make clangd usable with scheduler source code files again (Peter Zijlstra)
- tools: Add root_domains_dump.py which dumps root domains info (Juri Lelli)
- tools: Add dl_bw_dump.py for printing bandwidth accounting info (Juri Lelli)
Misc cleanups & fixes:
- Remove play_idle() (Feng Lee)
- Fix check_preemption_disabled() (Sebastian Andrzej Siewior)
- Do not call __put_task_struct() on RT if pi_blocked_on is set
(Luis Claudio R. Goncalves)
- Correct the comment in place_entity() (wang wei)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=8T0v
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2025-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core scheduler changes:
- Better tracking of maximum lag of tasks in presence of different
slices duration, for better handling of lag in the fair scheduler
(Vincent Guittot)
- Clean up and standardize #if/#else/#endif markers throughout the
entire scheduler code base (Ingo Molnar)
- Make SMP unconditional: build the SMP scheduler's data structures
and logic on UP kernel too, even though they are not used, to
simplify the scheduler and remove around 200 #ifdef/[#else]/#endif
blocks from the scheduler (Ingo Molnar)
- Reorganize cgroup bandwidth control interface handling for better
interfacing with sched_ext (Tejun Heo)
Balancing:
- Bump sd->max_newidle_lb_cost when newidle balance fails (Chris
Mason)
- Remove sched_domain_topology_level::flags to simplify the code
(Prateek Nayak)
- Simplify and clean up build_sched_topology() (Li Chen)
- Optimize build_sched_topology() on large machines (Li Chen)
Real-time scheduling:
- Add initial version of proxy execution: a mechanism for
mutex-owning tasks to inherit the scheduling context of higher
priority waiters.
Currently limited to a single runqueue and conditional on
CONFIG_EXPERT, and other limitations (John Stultz, Peter Zijlstra,
Valentin Schneider)
- Deadline scheduler (Juri Lelli):
- Fix dl_servers initialization order (Juri Lelli)
- Fix DL scheduler's root domain reinitialization logic (Juri
Lelli)
- Fix accounting bugs after global limits change (Juri Lelli)
- Fix scalability regression by implementing less agressive
dl_server handling (Peter Zijlstra)
PSI:
- Improve scalability by optimizing psi_group_change() cpu_clock()
usage (Peter Zijlstra)
Rust changes:
- Make Task, CondVar and PollCondVar methods inline to avoid
unnecessary function calls (Kunwu Chan, Panagiotis Foliadis)
- Add might_sleep() support for Rust code: Rust's "#[track_caller]"
mechanism is used so that Rust's might_sleep() doesn't need to be
defined as a macro (Fujita Tomonori)
- Introduce file_from_location() (Boqun Feng)
Debugging & instrumentation:
- Make clangd usable with scheduler source code files again (Peter
Zijlstra)
- tools: Add root_domains_dump.py which dumps root domains info (Juri
Lelli)
- tools: Add dl_bw_dump.py for printing bandwidth accounting info
(Juri Lelli)
Misc cleanups & fixes:
- Remove play_idle() (Feng Lee)
- Fix check_preemption_disabled() (Sebastian Andrzej Siewior)
- Do not call __put_task_struct() on RT if pi_blocked_on is set (Luis
Claudio R. Goncalves)
- Correct the comment in place_entity() (wang wei)"
* tag 'sched-core-2025-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (84 commits)
sched/idle: Remove play_idle()
sched: Do not call __put_task_struct() on rt if pi_blocked_on is set
sched: Start blocked_on chain processing in find_proxy_task()
sched: Fix proxy/current (push,pull)ability
sched: Add an initial sketch of the find_proxy_task() function
sched: Fix runtime accounting w/ split exec & sched contexts
sched: Move update_curr_task logic into update_curr_se
locking/mutex: Add p->blocked_on wrappers for correctness checks
locking/mutex: Rework task_struct::blocked_on
sched: Add CONFIG_SCHED_PROXY_EXEC & boot argument to enable/disable
sched/topology: Remove sched_domain_topology_level::flags
x86/smpboot: avoid SMT domain attach/destroy if SMT is not enabled
x86/smpboot: moves x86_topology to static initialize and truncate
x86/smpboot: remove redundant CONFIG_SCHED_SMT
smpboot: introduce SDTL_INIT() helper to tidy sched topology setup
tools/sched: Add dl_bw_dump.py for printing bandwidth accounting info
tools/sched: Add root_domains_dump.py which dumps root domains info
sched/deadline: Fix accounting after global limits change
sched/deadline: Reset extra_bw to max_bw when clearing root domains
sched/deadline: Initialize dl_servers after SMP
...
Changes
-------
* Add trivial kunit test for ratelimit
* Make the ratelimit test more reliable (Petr Mladek)
* Add stress test for ratelimit
-----BEGIN PGP SIGNATURE-----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=DDJ8
-----END PGP SIGNATURE-----
Merge tag 'ratelimit.2025.07.23a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull ratelimit test updates from Paul McKenney:
"Add functional and stress tests:
- Add trivial kunit test for ratelimit
- Make the ratelimit test more reliable (Petr Mladek)
- Add stress test for ratelimit"
* tag 'ratelimit.2025.07.23a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
lib: Add stress test for ratelimit
lib: Make the ratelimit test more reliable
lib: Add trivial kunit test for ratelimit
