mirror of
https://github.com/torvalds/linux.git
synced 2026-08-04 22:38:46 +02:00
bf94dea7fd
624 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Yang Li
|
b69bdba5a3 |
swiotlb: fix kernel-doc description for swiotlb_del_transient
Describe the pool argument in the kernel-doc comment for swiotlb_del_transient. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Michael Kelley
|
7296f2301a |
swiotlb: reduce swiotlb pool lookups
With CONFIG_SWIOTLB_DYNAMIC enabled, each round-trip map/unmap pair in the swiotlb results in 6 calls to swiotlb_find_pool(). In multiple places, the pool is found and used in one function, and then must be found again in the next function that is called because only the tlb_addr is passed as an argument. These are the six call sites: dma_direct_map_page: 1. swiotlb_map -> swiotlb_tbl_map_single -> swiotlb_bounce dma_direct_unmap_page: 2. dma_direct_sync_single_for_cpu -> is_swiotlb_buffer 3. dma_direct_sync_single_for_cpu -> swiotlb_sync_single_for_cpu -> swiotlb_bounce 4. is_swiotlb_buffer 5. swiotlb_tbl_unmap_single -> swiotlb_del_transient 6. swiotlb_tbl_unmap_single -> swiotlb_release_slots Reduce the number of calls by finding the pool at a higher level, and passing it as an argument instead of searching again. A key change is for is_swiotlb_buffer() to return a pool pointer instead of a boolean, and then pass this pool pointer to subsequent swiotlb functions. There are 9 occurrences of is_swiotlb_buffer() used to test if a buffer is a swiotlb buffer before calling a swiotlb function. To reduce code duplication in getting the pool pointer and passing it as an argument, introduce inline wrappers for this pattern. The generated code is essentially unchanged. Since is_swiotlb_buffer() no longer returns a boolean, rename some functions to reflect the change: * swiotlb_find_pool() becomes __swiotlb_find_pool() * is_swiotlb_buffer() becomes swiotlb_find_pool() * is_xen_swiotlb_buffer() becomes xen_swiotlb_find_pool() With these changes, a round-trip map/unmap pair requires only 2 pool lookups (listed using the new names and wrappers): dma_direct_unmap_page: 1. dma_direct_sync_single_for_cpu -> swiotlb_find_pool 2. swiotlb_tbl_unmap_single -> swiotlb_find_pool These changes come from noticing the inefficiencies in a code review, not from performance measurements. With CONFIG_SWIOTLB_DYNAMIC, __swiotlb_find_pool() is not trivial, and it uses an RCU read lock, so avoiding the redundant calls helps performance in a hot path. When CONFIG_SWIOTLB_DYNAMIC is *not* set, the code size reduction is minimal and the perf benefits are likely negligible, but no harm is done. No functional change is intended. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Yicong Yang
|
54624acf88 |
dma-mapping: benchmark: Don't starve others when doing the test
The test thread will start N benchmark kthreads and then schedule out until the test time finished and notify the benchmark kthreads to stop. The benchmark kthreads will keep running until notified to stop. There's a problem with current implementation when the benchmark kthreads number is equal to the CPUs on a non-preemptible kernel: since the scheduler will balance the kthreads across the CPUs and when the test time's out the test thread won't get a chance to be scheduled on any CPU then cannot notify the benchmark kthreads to stop. This can be easily reproduced on a VM (simulated with 16 CPUs) with PREEMPT_VOLUNTARY: estuary:/mnt$ ./dma_map_benchmark -t 16 -s 1 rcu: INFO: rcu_sched self-detected stall on CPU rcu: 10-...!: (5221 ticks this GP) idle=ed24/1/0x4000000000000000 softirq=142/142 fqs=0 rcu: (t=5254 jiffies g=-559 q=45 ncpus=16) rcu: rcu_sched kthread starved for 5255 jiffies! g-559 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=12 rcu: Unless rcu_sched kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_sched state:R running task stack:0 pid:16 tgid:16 ppid:2 flags:0x00000008 Call trace __switch_to+0xec/0x138 __schedule+0x2f8/0x1080 schedule+0x30/0x130 schedule_timeout+0xa0/0x188 rcu_gp_fqs_loop+0x128/0x528 rcu_gp_kthread+0x1c8/0x208 kthread+0xec/0xf8 ret_from_fork+0x10/0x20 Sending NMI from CPU 10 to CPUs 0: NMI backtrace for cpu 0 CPU: 0 PID: 332 Comm: dma-map-benchma Not tainted 6.10.0-rc1-vanilla-LSE #8 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : arm_smmu_cmdq_issue_cmdlist+0x218/0x730 lr : arm_smmu_cmdq_issue_cmdlist+0x488/0x730 sp : ffff80008748b630 x29: ffff80008748b630 x28: 0000000000000000 x27: ffff80008748b780 x26: 0000000000000000 x25: 000000000000bc70 x24: 000000000001bc70 x23: ffff0000c12af080 x22: 0000000000010000 x21: 000000000000ffff x20: ffff80008748b700 x19: ffff0000c12af0c0 x18: 0000000000010000 x17: 0000000000000001 x16: 0000000000000040 x15: ffffffffffffffff x14: 0001ffffffffffff x13: 000000000000ffff x12: 00000000000002f1 x11: 000000000001ffff x10: 0000000000000031 x9 : ffff800080b6b0b8 x8 : ffff0000c2a48000 x7 : 000000000001bc71 x6 : 0001800000000000 x5 : 00000000000002f1 x4 : 01ffffffffffffff x3 : 000000000009aaf1 x2 : 0000000000000018 x1 : 000000000000000f x0 : ffff0000c12af18c Call trace: arm_smmu_cmdq_issue_cmdlist+0x218/0x730 __arm_smmu_tlb_inv_range+0xe0/0x1a8 arm_smmu_iotlb_sync+0xc0/0x128 __iommu_dma_unmap+0x248/0x320 iommu_dma_unmap_page+0x5c/0xe8 dma_unmap_page_attrs+0x38/0x1d0 map_benchmark_thread+0x118/0x2c0 kthread+0xec/0xf8 ret_from_fork+0x10/0x20 Solve this by adding scheduling point in the kthread loop, so if there're other threads in the system they may have a chance to run, especially the thread to notify the test end. However this may degrade the test concurrency so it's recommended to run this on an idle system. Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Acked-by: Barry Song <baohua@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Fedor Pchelkin
|
e64746e74f |
dma-mapping: benchmark: handle NUMA_NO_NODE correctly
cpumask_of_node() can be called for NUMA_NO_NODE inside do_map_benchmark()
resulting in the following sanitizer report:
UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28
index -1 is out of range for type 'cpumask [64][1]'
CPU: 1 PID: 990 Comm: dma_map_benchma Not tainted 6.9.0-rc6 #29
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:117)
ubsan_epilogue (lib/ubsan.c:232)
__ubsan_handle_out_of_bounds (lib/ubsan.c:429)
cpumask_of_node (arch/x86/include/asm/topology.h:72) [inline]
do_map_benchmark (kernel/dma/map_benchmark.c:104)
map_benchmark_ioctl (kernel/dma/map_benchmark.c:246)
full_proxy_unlocked_ioctl (fs/debugfs/file.c:333)
__x64_sys_ioctl (fs/ioctl.c:890)
do_syscall_64 (arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Use cpumask_of_node() in place when binding a kernel thread to a cpuset
of a particular node.
Note that the provided node id is checked inside map_benchmark_ioctl().
It's just a NUMA_NO_NODE case which is not handled properly later.
Found by Linux Verification Center (linuxtesting.org).
Fixes:
|
||
|
Fedor Pchelkin
|
1ff05e723f |
dma-mapping: benchmark: fix node id validation
While validating node ids in map_benchmark_ioctl(), node_possible() may
be provided with invalid argument outside of [0,MAX_NUMNODES-1] range
leading to:
BUG: KASAN: wild-memory-access in map_benchmark_ioctl (kernel/dma/map_benchmark.c:214)
Read of size 8 at addr 1fffffff8ccb6398 by task dma_map_benchma/971
CPU: 7 PID: 971 Comm: dma_map_benchma Not tainted 6.9.0-rc6 #37
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:117)
kasan_report (mm/kasan/report.c:603)
kasan_check_range (mm/kasan/generic.c:189)
variable_test_bit (arch/x86/include/asm/bitops.h:227) [inline]
arch_test_bit (arch/x86/include/asm/bitops.h:239) [inline]
_test_bit at (include/asm-generic/bitops/instrumented-non-atomic.h:142) [inline]
node_state (include/linux/nodemask.h:423) [inline]
map_benchmark_ioctl (kernel/dma/map_benchmark.c:214)
full_proxy_unlocked_ioctl (fs/debugfs/file.c:333)
__x64_sys_ioctl (fs/ioctl.c:890)
do_syscall_64 (arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Compare node ids with sane bounds first. NUMA_NO_NODE is considered a
special valid case meaning that benchmarking kthreads won't be bound to a
cpuset of a given node.
Found by Linux Verification Center (linuxtesting.org).
Fixes:
|
||
|
Fedor Pchelkin
|
f7c9ccaadf |
dma-mapping: benchmark: avoid needless copy_to_user if benchmark fails
If do_map_benchmark() has failed, there is nothing useful to copy back to userspace. Suggested-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Fedor Pchelkin
|
bb9025f443 |
dma-mapping: benchmark: fix up kthread-related error handling
kthread creation failure is invalidly handled inside do_map_benchmark().
The put_task_struct() calls on the error path are supposed to balance the
get_task_struct() calls which only happen after all the kthreads are
successfully created. Rollback using kthread_stop() for already created
kthreads in case of such failure.
In normal situation call kthread_stop_put() to gracefully stop kthreads
and put their task refcounts. This should be done for all started
kthreads.
Found by Linux Verification Center (linuxtesting.org).
Fixes:
|
||
|
Linus Torvalds
|
daa121128a |
dma-mapping updates for Linux 6.10
- optimize DMA sync calls when they are no-ops (Alexander Lobakin) - fix swiotlb padding for untrusted devices (Michael Kelley) - add documentation for swiotb (Michael Kelley) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmZLV+gLHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYPO7hAAlKuXigzwcrVEUnfRGRdaZ28xbmffyC1dPfw8HRZe xJqvD51aJ/VOoOCcUyt3hNLEQHwtjEk4eM0xGcAASMdwceU58doJCcDJBpbbgbDK CPKJgBLQBC1JfAJUpRiJkV4RsudRhAyndIzUPVgkz0WObpEgDpfO0ClHRF/0Pavy 1sBFVFMbB1ewb/D8ffpp+DWfwrwu0oMC3A2LkYu2F5SQFWuVOpbNemrnZ6K2ckPt 2mcLpJ308+sti8Ka/LrI2akU8JCLYMYDQnue/44v3X3Gm63cMcEx/fj5M5x6m71n P+cxAkjsGDHybnfjbUvR842to8msRsH4CI4Zbb69+5HDlWSadM8JhQd74oeii6o6 RiGPrrFEk7vCxFOkUsqGFYMykEX+71wXfQ1Mpp/b4QgdqBLkxW4ozQ3Ya7ASUs2z TLLmQvIXtYKGnyU+RdOkvS6piHjd4wVHOhuGVdXqVT7WrbaPeovY4TNSTV2ZA1gE 9Y5RCdrX9xeGGNjsYXKwsWGvXVsm6UTQmQVUsatQb3ic+K3S6tQR9pwzk0HmhMuM BscWHSAEL7T8ZZ5Ydph45Cw/6xdH7LggD+nRtLcdAuzCika12eabZHsO0DrF533n qXYOjZOgsMEZWICynxq6+EGQKGWY+F+GyKDMU2w2Es5OgMa9Bqb40aSF+Q887s96 xwI= =Pa8W -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.10-2024-05-20' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - optimize DMA sync calls when they are no-ops (Alexander Lobakin) - fix swiotlb padding for untrusted devices (Michael Kelley) - add documentation for swiotb (Michael Kelley) * tag 'dma-mapping-6.10-2024-05-20' of git://git.infradead.org/users/hch/dma-mapping: dma: fix DMA sync for drivers not calling dma_set_mask*() xsk: use generic DMA sync shortcut instead of a custom one page_pool: check for DMA sync shortcut earlier page_pool: don't use driver-set flags field directly page_pool: make sure frag API fields don't span between cachelines iommu/dma: avoid expensive indirect calls for sync operations dma: avoid redundant calls for sync operations dma: compile-out DMA sync op calls when not used iommu/dma: fix zeroing of bounce buffer padding used by untrusted devices swiotlb: remove alloc_size argument to swiotlb_tbl_map_single() Documentation/core-api: add swiotlb documentation |
||
|
Linus Torvalds
|
61307b7be4 |
The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs. Notable
series include:
- Lucas Stach has provided some page-mapping
cleanup/consolidation/maintainability work in the series "mm/treewide:
Remove pXd_huge() API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one
test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being allocated:
number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in largely
similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene" Johannes
Weiner has fixed the page allocator's handling of migratetype requests,
with resulting improvements in compaction efficiency.
- In the series "make the hugetlb migration strategy consistent" Baolin
Wang has fixed a hugetlb migration issue, which should improve hugetlb
allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when memory
almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting" Kairui
Song has optimized pagecache insertion, yielding ~10% performance
improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various page->flags
cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb
functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series
"mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs. This
is a simple first-cut implementation for now. The series is "support
multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in the
series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts in
the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call it
GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to
use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes". Fixes
the initialization code so that migration between different memory types
works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant driver
in the series "mm: follow_pte() improvements and acrn follow_pte()
fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to folio
in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size THP's
in the series "mm: add per-order mTHP alloc and swpout counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled
and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His series
"mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes
the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback instrumentation
in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series "Fix
and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the
series "Improve anon_vma scalability for anon VMAs". Intel's test bot
reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZkgQYwAKCRDdBJ7gKXxA
jrdKAP9WVJdpEcXxpoub/vVE0UWGtffr8foifi9bCwrQrGh5mgEAx7Yf0+d/oBZB
nvA4E0DcPrUAFy144FNM0NTCb7u9vAw=
=V3R/
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
||
|
Alexander Lobakin
|
a6016aac52 |
dma: fix DMA sync for drivers not calling dma_set_mask*()
There are several reports that the DMA sync shortcut broke non-coherent
devices.
dev->dma_need_sync is false after the &device allocation and if a driver
didn't call dma_set_mask*(), it will still be false even if the device
is not DMA-coherent and thus needs synchronizing. Due to historical
reasons, there's still a lot of drivers not calling it.
Invert the boolean, so that the sync will be performed by default and
the shortcut will be enabled only when calling dma_set_mask*().
Reported-by: Steven Price <steven.price@arm.com>
Closes: https://lore.kernel.org/lkml/010686f5-3049-46a1-8230-7752a1b433ff@arm.com
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/lkml/46160534-5003-4809-a408-6b3a3f4921e9@samsung.com
Fixes:
|
||
|
Alexander Lobakin
|
f406c8e4b7 |
dma: avoid redundant calls for sync operations
Quite often, devices do not need dma_sync operations on x86_64 at least. Indeed, when dev_is_dma_coherent(dev) is true and dev_use_swiotlb(dev) is false, iommu_dma_sync_single_for_cpu() and friends do nothing. However, indirectly calling them when CONFIG_RETPOLINE=y consumes about 10% of cycles on a cpu receiving packets from softirq at ~100Gbit rate. Even if/when CONFIG_RETPOLINE is not set, there is a cost of about 3%. Add dev->need_dma_sync boolean and turn it off during the device initialization (dma_set_mask()) depending on the setup: dev_is_dma_coherent() for the direct DMA, !(sync_single_for_device || sync_single_for_cpu) or the new dma_map_ops flag, %DMA_F_CAN_SKIP_SYNC, advertised for non-NULL DMA ops. Then later, if/when swiotlb is used for the first time, the flag is reset back to on, from swiotlb_tbl_map_single(). On iavf, the UDP trafficgen with XDP_DROP in skb mode test shows +3-5% increase for direct DMA. Suggested-by: Christoph Hellwig <hch@lst.de> # direct DMA shortcut Co-developed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Alexander Lobakin
|
fe7514b149 |
dma: compile-out DMA sync op calls when not used
Some platforms do have DMA, but DMA there is always direct and coherent. Currently, even on such platforms DMA sync operations are compiled and called. Add a new hidden Kconfig symbol, DMA_NEED_SYNC, and set it only when either sync operations are needed or there is DMA ops or swiotlb or DMA debug is enabled. Compile global dma_sync_*() and dma_need_sync() only when it's set, otherwise provide empty inline stubs. The change allows for future optimizations of DMA sync calls depending on runtime conditions. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Michael Kelley
|
327e2c97c4 |
swiotlb: remove alloc_size argument to swiotlb_tbl_map_single()
Currently swiotlb_tbl_map_single() takes alloc_align_mask and alloc_size arguments to specify an swiotlb allocation that is larger than mapping_size. This larger allocation is used solely by iommu_dma_map_single() to handle untrusted devices that should not have DMA visibility to memory pages that are partially used for unrelated kernel data. Having two arguments to specify the allocation is redundant. While alloc_align_mask naturally specifies the alignment of the starting address of the allocation, it can also implicitly specify the size by rounding up the mapping_size to that alignment. Additionally, the current approach has an edge case bug. iommu_dma_map_page() already does the rounding up to compute the alloc_size argument. But swiotlb_tbl_map_single() then calculates the alignment offset based on the DMA min_align_mask, and adds that offset to alloc_size. If the offset is non-zero, the addition may result in a value that is larger than the max the swiotlb can allocate. If the rounding up is done _after_ the alignment offset is added to the mapping_size (and the original mapping_size conforms to the value returned by swiotlb_max_mapping_size), then the max that the swiotlb can allocate will not be exceeded. In view of these issues, simplify the swiotlb_tbl_map_single() interface by removing the alloc_size argument. Most call sites pass the same value for mapping_size and alloc_size, and they pass alloc_align_mask as zero. Just remove the redundant argument from these callers, as they will see no functional change. For iommu_dma_map_page() also remove the alloc_size argument, and have swiotlb_tbl_map_single() compute the alloc_size by rounding up mapping_size after adding the offset based on min_align_mask. This has the side effect of fixing the edge case bug but with no other functional change. Also add a sanity test on the alloc_align_mask. While IOMMU code currently ensures the granule is not larger than PAGE_SIZE, if that guarantee were to be removed in the future, the downstream effect on the swiotlb might go unnoticed until strange allocation failures occurred. Tested on an ARM64 system with 16K page size and some kernel test-only hackery to allow modifying the DMA min_align_mask and the granule size that becomes the alloc_align_mask. Tested these combinations with a variety of original memory addresses and sizes, including those that reproduce the edge case bug: * 4K granule and 0 min_align_mask * 4K granule and 0xFFF min_align_mask (4K - 1) * 16K granule and 0xFFF min_align_mask * 64K granule and 0xFFF min_align_mask * 64K granule and 0x3FFF min_align_mask (16K - 1) With the changes, all combinations pass. Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr@tesarici.cz> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Will Deacon
|
75961ffb5c |
swiotlb: initialise restricted pool list_head when SWIOTLB_DYNAMIC=y
Using restricted DMA pools (CONFIG_DMA_RESTRICTED_POOL=y) in conjunction
with dynamic SWIOTLB (CONFIG_SWIOTLB_DYNAMIC=y) leads to the following
crash when initialising the restricted pools at boot-time:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
| Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
| pc : rmem_swiotlb_device_init+0xfc/0x1ec
| lr : rmem_swiotlb_device_init+0xf0/0x1ec
| Call trace:
| rmem_swiotlb_device_init+0xfc/0x1ec
| of_reserved_mem_device_init_by_idx+0x18c/0x238
| of_dma_configure_id+0x31c/0x33c
| platform_dma_configure+0x34/0x80
faddr2line reveals that the crash is in the list validation code:
include/linux/list.h:83
include/linux/rculist.h:79
include/linux/rculist.h:106
kernel/dma/swiotlb.c:306
kernel/dma/swiotlb.c:1695
because add_mem_pool() is trying to list_add_rcu() to a NULL
'mem->pools'.
Fix the crash by initialising the 'mem->pools' list_head in
rmem_swiotlb_device_init() before calling add_mem_pool().
Reported-by: Nikita Ioffe <ioffe@google.com>
Tested-by: Nikita Ioffe <ioffe@google.com>
Fixes:
|
||
|
Suren Baghdasaryan
|
8a2f118787 |
change alloc_pages name in dma_map_ops to avoid name conflicts
After redefining alloc_pages, all uses of that name are being replaced. Change the conflicting names to prevent preprocessor from replacing them when it's not intended. Link: https://lkml.kernel.org/r/20240321163705.3067592-18-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Tested-by: Kees Cook <keescook@chromium.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alex Gaynor <alex.gaynor@gmail.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Andreas Hindborg <a.hindborg@samsung.com> Cc: Benno Lossin <benno.lossin@proton.me> Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Gary Guo <gary@garyguo.net> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Miguel Ojeda <ojeda@kernel.org> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wedson Almeida Filho <wedsonaf@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Dexuan Cui
|
a1255ccab8 |
swiotlb: do not set total_used to 0 in swiotlb_create_debugfs_files()
Sometimes the readout of /sys/kernel/debug/swiotlb/io_tlb_used and io_tlb_used_hiwater can be a huge number (e.g. 18446744073709551615), which is actually a negative number if we use "%ld" to print the number. When swiotlb_create_default_debugfs() is running from late_initcall, mem->total_used may already be non-zero, because the storage driver may have already started to perform I/O operations: if the storage driver is built-in, its probe() callback is called before late_initcall. swiotlb_create_debugfs_files() should not blindly set mem->total_used and mem->used_hiwater to 0; actually it doesn't have to initialize the fields at all, because the fields, as part of the global struct io_tlb_default_mem, have been implicitly initialized to zero. Also don't explicitly set mem->transient_nslabs to 0. Fixes: |
||
|
Michael Kelley
|
e8068f2d75 |
swiotlb: fix swiotlb_bounce() to do partial sync's correctly
In current code, swiotlb_bounce() may do partial sync's correctly in some circumstances, but may incorrectly fail in other circumstances. The failure cases require both of these to be true: 1) swiotlb_align_offset() returns a non-zero "offset" value 2) the tlb_addr of the partial sync area points into the first "offset" bytes of the _second_ or subsequent swiotlb slot allocated for the mapping Code added in commit |
||
|
Petr Tesarik
|
af133562d5 |
swiotlb: extend buffer pre-padding to alloc_align_mask if necessary
Allow a buffer pre-padding of up to alloc_align_mask, even if it requires
allocating additional IO TLB slots.
If the allocation alignment is bigger than IO_TLB_SIZE and min_align_mask
covers any non-zero bits in the original address between IO_TLB_SIZE and
alloc_align_mask, these bits are not preserved in the swiotlb buffer
address.
To fix this case, increase the allocation size and use a larger offset
within the allocated buffer. As a result, extra padding slots may be
allocated before the mapping start address.
Leave orig_addr in these padding slots initialized to INVALID_PHYS_ADDR.
These slots do not correspond to any CPU buffer, so attempts to sync the
data should be ignored.
The padding slots should be automatically released when the buffer is
unmapped. However, swiotlb_tbl_unmap_single() takes only the address of the
DMA buffer slot, not the first padding slot. Save the number of padding
slots in struct io_tlb_slot and use it to adjust the slot index in
swiotlb_release_slots(), so all allocated slots are properly freed.
Fixes: 2fd4fa5d3fb5 ("swiotlb: Fix alignment checks when both allocation and DMA masks are present")
Link: https://lore.kernel.org/linux-iommu/20240311210507.217daf8b@meshulam.tesarici.cz/
Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
||
|
Linus Torvalds
|
864ad046c1 |
dma-mapping fixes for Linux 6.9
This has a set of swiotlb alignment fixes for sometimes very long standing bugs from Will. We've been discussion them for a while and they should be solid now. -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmX/bmILHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYOuKQ//cUR3EywszAc04x8dIYsfegFGdQxUeJD0+1elAPss ELiqrlg5A/Yn4uHKpXjWbvJ+v1Ywh3o8+vlgUiG4aFeg4xEd+FsJqm2SDa3jhdMP 2hV8pwB92kpkKCxyCAqx8O/4o4fY++KCFsOtnammEudFjurJaCrRTlauOn6D1t/i JsBYCFtjFIhIPHQe7jmZ6dNiLEfiIJ+q8ImW+UxuB+gOGgU8C4VVW3tHuo3KeU7n yVOcz4yJrQ4xYzG3RKtaU0FE0ybA860xwiA5oPvqpI9A2ISGovv7ik0QCUlHXhff z+iL8Lj/KsOucq5pBDhbRYeN2n4VVogEwb/hut6mgyqj1ESjqeZaLioVHqOTDbmB +vNTVBt6OGTOq1YkNKttK9vBBXs5RdZSBalzBG/QO1ewmrNVVZ7z8fWXVRDipoIl sAIXmI8xAy5TNL6UbJ+RDfYeLlTzHjXGKQGB49gumOA8s4w5P5v9diYegX6GcVZV PKkYLOvprwcyi8Xxx2mNxFDxh+LWqzMYqzwsN7AoRTW4TRc7Tel0G6Axs+V/cL/Y 23IHfFfT2HqDUM5PuBfUcgCrtw1hinuD80xqXVcvaU+AYoQhrGHJFLHkj6lTwV2b hmuul170froI2A/vm8yGGqcn2Me55AexlpMab+UWL+iisGtqFTWi9b9vK/2Vi+Zj wBg= =Xaob -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.9-2024-03-24' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: "This has a set of swiotlb alignment fixes for sometimes very long standing bugs from Will. We've been discussion them for a while and they should be solid now" * tag 'dma-mapping-6.9-2024-03-24' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: Reinstate page-alignment for mappings >= PAGE_SIZE iommu/dma: Force swiotlb_max_mapping_size on an untrusted device swiotlb: Fix alignment checks when both allocation and DMA masks are present swiotlb: Honour dma_alloc_coherent() alignment in swiotlb_alloc() swiotlb: Enforce page alignment in swiotlb_alloc() swiotlb: Fix double-allocation of slots due to broken alignment handling |
||
|
Linus Torvalds
|
902861e34c |
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series "mm:
zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is hotplugged
as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving policy
wherein we allocate memory across nodes in a weighted fashion rather
than uniformly. This is beneficial in heterogeneous memory environments
appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the process
has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown situations.
The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings" Ryan
Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's series
"Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page faults.
He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction test",
Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess in
our handling of DAX on archiecctures which have virtually aliasing data
caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides dramatic
improvements in worst-case mmap_lock hold times during certain
userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability improvements
in his series "Mitigate a vmap lock contention". It realizes a 12x
improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging of
large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages() to
an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which are
configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZfJpPQAKCRDdBJ7gKXxA
joxeAP9TrcMEuHnLmBlhIXkWbIR4+ki+pA3v+gNTlJiBhnfVSgD9G55t1aBaRplx
TMNhHfyiHYDTx/GAV9NXW84tasJSDgA=
=TG55
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
|
||
|
Will Deacon
|
14cebf689a |
swiotlb: Reinstate page-alignment for mappings >= PAGE_SIZE
For swiotlb allocations >= PAGE_SIZE, the slab search historically
adjusted the stride to avoid checking unaligned slots. This had the
side-effect of aligning large mapping requests to PAGE_SIZE, but that
was broken by
|
||
|
Will Deacon
|
51b30ecb73 |
swiotlb: Fix alignment checks when both allocation and DMA masks are present
Nicolin reports that swiotlb buffer allocations fail for an NVME device
behind an IOMMU using 64KiB pages. This is because we end up with a
minimum allocation alignment of 64KiB (for the IOMMU to map the buffer
safely) but a minimum DMA alignment mask corresponding to a 4KiB NVME
page (i.e. preserving the 4KiB page offset from the original allocation).
If the original address is not 4KiB-aligned, the allocation will fail
because swiotlb_search_pool_area() erroneously compares these unmasked
bits with the 64KiB-aligned candidate allocation.
Tweak swiotlb_search_pool_area() so that the DMA alignment mask is
reduced based on the required alignment of the allocation.
Fixes:
|
||
|
Will Deacon
|
cbf53074a5 |
swiotlb: Honour dma_alloc_coherent() alignment in swiotlb_alloc()
core-api/dma-api-howto.rst states the following properties of
dma_alloc_coherent():
| The CPU virtual address and the DMA address are both guaranteed to
| be aligned to the smallest PAGE_SIZE order which is greater than or
| equal to the requested size.
However, swiotlb_alloc() passes zero for the 'alloc_align_mask'
parameter of swiotlb_find_slots() and so this property is not upheld.
Instead, allocations larger than a page are aligned to PAGE_SIZE,
Calculate the mask corresponding to the page order suitable for holding
the allocation and pass that to swiotlb_find_slots().
Fixes:
|
||
|
Will Deacon
|
823353b7cf |
swiotlb: Enforce page alignment in swiotlb_alloc()
When allocating pages from a restricted DMA pool in swiotlb_alloc(), the buffer address is blindly converted to a 'struct page *' that is returned to the caller. In the unlikely event of an allocation bug, page-unaligned addresses are not detected and slots can silently be double-allocated. Add a simple check of the buffer alignment in swiotlb_alloc() to make debugging a little easier if something has gone wonky. Signed-off-by: Will Deacon <will@kernel.org> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Will Deacon
|
04867a7a33 |
swiotlb: Fix double-allocation of slots due to broken alignment handling
Commit |
||
|
Rick Edgecombe
|
b9fa16949d |
dma-direct: Leak pages on dma_set_decrypted() failure
On TDX it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. DMA could free decrypted/shared pages if dma_set_decrypted() fails. This should be a rare case. Just leak the pages in this case instead of freeing them. Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
ZhangPeng
|
02e7656970 |
swiotlb: add debugfs to track swiotlb transient pool usage
Introduce a new debugfs interface io_tlb_transient_nslabs. The device driver can create a new swiotlb transient memory pool once default memory pool is full. To export the swiotlb transient memory pool usage via debugfs would help the user estimate the size of transient swiotlb memory pool or analyze device driver memory leak issue. Signed-off-by: ZhangPeng <zhangpeng362@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Anshuman Khandual
|
fe58582c0e |
mm/cma: drop CONFIG_CMA_DEBUG
All pr_debug() prints in (mm/cma.c) could be enabled via standard Makefile based method. Besides cma_debug_show_areas() should always be called during cma_alloc() failure path. This seemingly redundant config, CONFIG_CMA_DEBUG can be dropped without any problem. [lukas.bulwahn@gmail.com: remove debug code to removed CONFIG_CMA_DEBUG] Link: https://lkml.kernel.org/r/20240207143825.986-1-lukas.bulwahn@gmail.com Link: https://lkml.kernel.org/r/20240205031647.283510-1-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
17e232b6d2 |
dma-mapping fixes for Linux 6.8
- fix kerneldoc warnings (Randy Dunlap) - better bounds checking in swiotlb (ZhangPeng) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmWo0rYLHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYPxwRAAy/TfnQJZQX+VqLmdQ5JsHGoPkYCrdMdcGtM7JxHP 0QJZSCN/FRIRIB/kXXceCLlls79pQUdrfyiIM4ZyWZU6nWdKlUVw3xJZ8VtbSXla W0tKUlAaVwt6HuK+H0GkSs/l1JlU/qWUwrVSXdsAeWT8aQes6OqRbesm/N8vvgJE Do/uyGG4WFQaiSB4vv6M6S32KGzNN+BBZGLEk+K4Et4fRhwmMh2ciGMK8Df8yyDU iKFVPVii26PySCpkoupxFw59pS7LNEn7NCE0hwuCqQt1VE0+8Hyb8BG4sh8U66FM sP9FRqv8HAMofJmn3OGIQXIS3J2/0OPoDAGJUbl0JqMfOUj9B3X2Iu3xFYUVK7MJ C1OG3vsKUJ8Dq3SStTNan2PsOXekfcLzzY5iuUoWysl5YiDmJs7zut22oX43z+k5 lJ91QiEtejat39lAXERZYJ4BVuIoGM46xhJLbNjhdAcoakO4IpdETAEowsmZLxte 6LMGXKUd/swcy0BCuRtoKheAvLfE+OGPd6RA299nsSxfn6T9zGmnl5pvXqrS17yV n3riHqgohcOaUFTaj88aO/y+WunVN5J/bpdbrPeitEnE94DW3Y2ah+5tx5sj+MiW p5qMO2AiHqx0Go1mlpYbk78adtBMogdwHjSdYBX0NfZVt9agTIB3FG6UVCkNWYta ing= =5+TR -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.8-2024-01-18' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: - fix kerneldoc warnings (Randy Dunlap) - better bounds checking in swiotlb (ZhangPeng) * tag 'dma-mapping-6.8-2024-01-18' of git://git.infradead.org/users/hch/dma-mapping: dma-debug: fix kernel-doc warnings swiotlb: check alloc_size before the allocation of a new memory pool |
||
|
Linus Torvalds
|
296455ade1 |
Char/Misc and other Driver changes for 6.8-rc1
Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Lots of stuff in here, but first off, you will get a merge conflict in drivers/android/binder_alloc.c when merging this tree due to changing coming in through the -mm tree. The resolution of the merge issue can be found here: https://lore.kernel.org/r/20231207134213.25631ae9@canb.auug.org.au or in a simpler patch form in that thread: https://lore.kernel.org/r/ZXHzooF07LfQQYiE@google.com If there are issues with the merge of this file, please let me know. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues (other than the binder merge conflict.) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeMMQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynWNgCfQ/Yz7QO6EMLDwHO5LRsb3YMhjL4AoNVdanjP YoI7f1I4GBcC0GKNfK6s =+Kyv -----END PGP SIGNATURE----- Merge tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits) android: removed duplicate linux/errno uio: Fix use-after-free in uio_open drivers: soc: xilinx: add check for platform firmware: xilinx: Export function to use in other module scripts/tags.sh: remove find_sources scripts/tags.sh: use -n to test archinclude scripts/tags.sh: add local annotation scripts/tags.sh: use more portable -path instead of -wholename scripts/tags.sh: Update comment (addition of gtags) firmware: zynqmp: Convert to platform remove callback returning void firmware: turris-mox-rwtm: Convert to platform remove callback returning void firmware: stratix10-svc: Convert to platform remove callback returning void firmware: stratix10-rsu: Convert to platform remove callback returning void firmware: raspberrypi: Convert to platform remove callback returning void firmware: qemu_fw_cfg: Convert to platform remove callback returning void firmware: mtk-adsp-ipc: Convert to platform remove callback returning void firmware: imx-dsp: Convert to platform remove callback returning void firmware: coreboot_table: Convert to platform remove callback returning void firmware: arm_scpi: Convert to platform remove callback returning void firmware: arm_scmi: Convert to platform remove callback returning void ... |
||
|
Randy Dunlap
|
7c65aa3cc0 |
dma-debug: fix kernel-doc warnings
Update the kernel-doc comments to catch up with the code changes and
fix the kernel-doc warnings:
debug.c:83: warning: Excess struct member 'stacktrace' description in 'dma_debug_entry'
debug.c:83: warning: Function parameter or struct member 'stack_len' not described in 'dma_debug_entry'
debug.c:83: warning: Function parameter or struct member 'stack_entries' not described in 'dma_debug_entry'
Fixes:
|
||
|
Linus Torvalds
|
893e2f9eac |
dma-mapping updates for Linux 6.8
- reduce area lock contention for non-primary IO TLB pools (Petr Tesarik)
- don't store redundant offsets in the dma_ranges stuctures
(Robin Murphy)
- clear dev->dma_mem when freeing per-device pools (Joakim Zhang)
-----BEGIN PGP SIGNATURE-----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=v5F+
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.8-2024-01-08' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- reduce area lock contention for non-primary IO TLB pools (Petr
Tesarik)
- don't store redundant offsets in the dma_ranges stuctures (Robin
Murphy)
- clear dev->dma_mem when freeing per-device pools (Joakim Zhang)
* tag 'dma-mapping-6.8-2024-01-08' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: clear dev->dma_mem to NULL after freeing it
swiotlb: reduce area lock contention for non-primary IO TLB pools
dma-mapping: don't store redundant offsets
|
||
|
ZhangPeng
|
3dc2f20920 |
swiotlb: check alloc_size before the allocation of a new memory pool
The allocation request for swiotlb contiguous memory greater than 128*2KB cannot be fulfilled because it exceeds the maximum contiguous memory limit. If the swiotlb memory we allocate is larger than 128*2KB, swiotlb_find_slots() will still schedule the allocation of a new memory pool, which will increase memory overhead. Fix it by adding a check with alloc_size no more than 128*2KB before scheduling the allocation of a new memory pool in swiotlb_find_slots(). Signed-off-by: ZhangPeng <zhangpeng362@huawei.com> Reviewed-by: Petr Tesarik <petr.tesarik1@huawei-partners.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Kirill A. Shutemov
|
5e0a760b44 |
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
commit
|
||
|
Greg Kroah-Hartman
|
86438841e4 |
dma-debug: make dma_debug_add_bus take a const pointer
The driver core now can handle a const struct bus_type pointer, and the dma_debug_add_bus() call just passes on the pointer give to it to the driver core, so make this pointer const as well to allow everyone to use read-only struct bus_type pointers going forward. Cc: Christoph Hellwig <hch@lst.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: <iommu@lists.linux.dev> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/2023121941-dejected-nugget-681e@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Joakim Zhang
|
b07bc23476 |
dma-mapping: clear dev->dma_mem to NULL after freeing it
Reproduced with below sequence:
dma_declare_coherent_memory()->dma_release_coherent_memory()
->dma_declare_coherent_memory()->"return -EBUSY" error
It will return -EBUSY from the dma_assign_coherent_memory()
in dma_declare_coherent_memory(), the reason is that dev->dma_mem
pointer has not been set to NULL after it's freed.
Fixes:
|
||
|
Petr Tesarik
|
55c543865b |
swiotlb: reduce area lock contention for non-primary IO TLB pools
If multiple areas and multiple IO TLB pools exist, first iterate the
current CPU specific area in all pools. Then move to the next area index.
This is best illustrated by a diagram:
area 0 | area 1 | ... | area M |
pool 0 A B C
pool 1 D E
...
pool N F G H
Currently, each pool is searched before moving on to the next pool,
i.e. the search order is A, B ... C, D, E ... F, G ... H. With this patch,
each area is searched in all pools before moving on to the next area,
i.e. the search order is A, D ... F, B, E ... G ... C ... H.
Note that preemption is not disabled, and raw_smp_processor_id() may not
return a stable result, but it is called only once to determine the initial
area index. The search will iterate over all areas eventually, even if the
current task is preempted.
Next, some pools may have less (but not more) areas than default_nareas.
Skip such pools if the distance from the initial area index is greater than
pool->nareas. This logic ensures that for every pool the search starts in
the initial CPU's own area and never tries any area twice.
To verify performance impact, I booted the kernel with a minimum pool
size ("swiotlb=512,4,force"), so multiple pools get allocated, and I ran
these benchmarks:
- small: single-threaded I/O of 4 KiB blocks,
- big: single-threaded I/O of 64 KiB blocks,
- 4way: 4-way parallel I/O of 4 KiB blocks.
The "var" column in the tables below is the coefficient of variance over 5
runs of the test, the "diff" column is the relative difference against base
in read-write I/O bandwidth (MiB/s).
Tested on an x86 VM against a QEMU virtio SATA driver backed by a RAM-based
block device on the host:
base patched
var var diff
small 0.69% 0.62% +25.4%
big 2.14% 2.27% +25.7%
4way 2.65% 1.70% +23.6%
Tested on a Raspberry Pi against a class-10 A1 microSD card:
base patched
var var diff
small 0.53% 1.96% -0.3%
big 0.02% 0.57% +0.8%
4way 6.17% 0.40% +0.3%
These results confirm that there is significant performance boost in the
software IO TLB slot allocation itself. Where performance is dominated by
actual hardware, there is no measurable change.
Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Reviewed-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
||
|
Robin Murphy
|
4ad4c1f394 |
dma-mapping: don't store redundant offsets
A bus_dma_region necessarily stores both CPU and DMA base addresses for a range, so there's no need to also store the difference between them. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Petr Tesarik
|
53c87e846e |
swiotlb: fix out-of-bounds TLB allocations with CONFIG_SWIOTLB_DYNAMIC
Limit the free list length to the size of the IO TLB. Transient pool can be
smaller than IO_TLB_SEGSIZE, but the free list is initialized with the
assumption that the total number of slots is a multiple of IO_TLB_SEGSIZE.
As a result, swiotlb_area_find_slots() may allocate slots past the end of
a transient IO TLB buffer.
Reported-by: Niklas Schnelle <schnelle@linux.ibm.com>
Closes: https://lore.kernel.org/linux-iommu/104a8c8fedffd1ff8a2890983e2ec1c26bff6810.camel@linux.ibm.com/
Fixes:
|
||
|
Jia He
|
a409d96009 |
dma-mapping: fix dma_addressing_limited() if dma_range_map can't cover all system RAM
There is an unusual case that the range map covers right up to the top
of system RAM, but leaves a hole somewhere lower down. Then it prevents
the nvme device dma mapping in the checking path of phys_to_dma() and
causes the hangs at boot.
E.g. On an Armv8 Ampere server, the dsdt ACPI table is:
Method (_DMA, 0, Serialized) // _DMA: Direct Memory Access
{
Name (RBUF, ResourceTemplate ()
{
QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
0x0000000000000000, // Granularity
0x0000000000000000, // Range Minimum
0x00000000FFFFFFFF, // Range Maximum
0x0000000000000000, // Translation Offset
0x0000000100000000, // Length
,, , AddressRangeMemory, TypeStatic)
QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
0x0000000000000000, // Granularity
0x0000006010200000, // Range Minimum
0x000000602FFFFFFF, // Range Maximum
0x0000000000000000, // Translation Offset
0x000000001FE00000, // Length
,, , AddressRangeMemory, TypeStatic)
QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
0x0000000000000000, // Granularity
0x00000060F0000000, // Range Minimum
0x00000060FFFFFFFF, // Range Maximum
0x0000000000000000, // Translation Offset
0x0000000010000000, // Length
,, , AddressRangeMemory, TypeStatic)
QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
0x0000000000000000, // Granularity
0x0000007000000000, // Range Minimum
0x000003FFFFFFFFFF, // Range Maximum
0x0000000000000000, // Translation Offset
0x0000039000000000, // Length
,, , AddressRangeMemory, TypeStatic)
})
But the System RAM ranges are:
cat /proc/iomem |grep -i ram
90000000-91ffffff : System RAM
92900000-fffbffff : System RAM
880000000-fffffffff : System RAM
8800000000-bff5990fff : System RAM
bff59d0000-bff5a4ffff : System RAM
bff8000000-bfffffffff : System RAM
So some RAM ranges are out of dma_range_map.
Fix it by checking whether each of the system RAM resources can be
properly encompassed within the dma_range_map.
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
||
|
Jia He
|
8ae0e97031 |
dma-mapping: move dma_addressing_limited() out of line
This patch moves dma_addressing_limited() out of line, serving as a preliminary step to prevent the introduction of a new publicly accessible low-level helper when validating whether all system RAM is mapped within the DMA mapping range. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jia He <justin.he@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Petr Tesarik
|
a5e3b12745 |
swiotlb: do not free decrypted pages if dynamic
Fix these two error paths:
1. When set_memory_decrypted() fails, pages may be left fully or partially
decrypted.
2. Decrypted pages may be freed if swiotlb_alloc_tlb() determines that the
physical address is too high.
To fix the first issue, call set_memory_encrypted() on the allocated region
after a failed decryption attempt. If that also fails, leak the pages.
To fix the second issue, check that the TLB physical address is below the
requested limit before decrypting.
Let the caller differentiate between unsuitable physical address (=> retry
from a lower zone) and allocation failures (=> no point in retrying).
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Linus Torvalds
|
009fbfc97b |
dma-mapping updates for Linux 6.7
- get rid of the fake support for coherent DMA allocation on coldfire with
caches (Christoph Hellwig)
- add a few Kconfig dependencies so that Kconfig catches the use of
invalid configurations (Christoph Hellwig)
- fix a type in dma-debug output (Chuck Lever)
- rewrite a comment in swiotlb (Sean Christopherson)
-----BEGIN PGP SIGNATURE-----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=D8Eq
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.7-2023-10-30' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- get rid of the fake support for coherent DMA allocation on coldfire
with caches (Christoph Hellwig)
- add a few Kconfig dependencies so that Kconfig catches the use of
invalid configurations (Christoph Hellwig)
- fix a type in dma-debug output (Chuck Lever)
- rewrite a comment in swiotlb (Sean Christopherson)
* tag 'dma-mapping-6.7-2023-10-30' of git://git.infradead.org/users/hch/dma-mapping:
dma-debug: Fix a typo in a debugging eye-catcher
swiotlb: rewrite comment explaining why the source is preserved on DMA_FROM_DEVICE
m68k: remove unused includes from dma.c
m68k: don't provide arch_dma_alloc for nommu/coldfire
net: fec: use dma_alloc_noncoherent for data cache enabled coldfire
m68k: use the coherent DMA code for coldfire without data cache
dma-direct: warn when coherent allocations aren't supported
dma-direct: simplify the use atomic pool logic in dma_direct_alloc
dma-direct: add a CONFIG_ARCH_HAS_DMA_ALLOC symbol
dma-direct: add dependencies to CONFIG_DMA_GLOBAL_POOL
|
||
|
Petr Tesarik
|
d5090484b0 |
swiotlb: do not try to allocate a TLB bigger than MAX_ORDER pages
When allocating a new pool at runtime, reduce the number of slabs so
that the allocation order is at most MAX_ORDER. This avoids a kernel
warning in __alloc_pages().
The warning is relatively benign, because the pool size is subsequently
reduced when allocation fails, but it is silly to start with a request
that is known to fail, especially since this is the default behavior if
the kernel is built with CONFIG_SWIOTLB_DYNAMIC=y and booted without any
swiotlb= parameter.
Reported-by: Ben Greear <greearb@candelatech.com>
Closes: https://lore.kernel.org/netdev/4f173dd2-324a-0240-ff8d-abf5c191be18@candelatech.com/
Fixes:
|
||
|
Chuck Lever
|
36d91e8515 |
dma-debug: Fix a typo in a debugging eye-catcher
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Sean Christopherson
|
1132a1dc05 |
swiotlb: rewrite comment explaining why the source is preserved on DMA_FROM_DEVICE
Rewrite the comment explaining why swiotlb copies the original buffer to the TLB buffer before initiating DMA *from* the device, i.e. before the device DMAs into the TLB buffer. The existing comment's argument that preserving the original data can prevent a kernel memory leak is bogus. If the driver that triggered the mapping _knows_ that the device will overwrite the entire mapping, or the driver will consume only the written parts, then copying from the original memory is completely pointless. If neither of the above holds true, then copying from the original adds value only if preserving the data is necessary for functional correctness, or the driver explicitly initialized the original memory. If the driver didn't initialize the memory, then copying the original buffer to the TLB buffer simply changes what kernel data is leaked to user space. Writing the entire TLB buffer _does_ prevent leaking stale TLB buffer data from a previous bounce, but that can be achieved by simply zeroing the TLB buffer when grabbing a slot. The real reason swiotlb ended up initializing the TLB buffer with the original buffer is that it's necessary to make swiotlb operate as transparently as possible, i.e. to behave as closely as possible to hardware, and to avoid corrupting the original buffer, e.g. if the driver knows the device will do partial writes and is relying on the unwritten data to be preserved. Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/all/ZN5elYQ5szQndN8n@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Christoph Hellwig
|
63f067e33c |
dma-direct: warn when coherent allocations aren't supported
Log a warning once when dma_alloc_coherent fails because the platform does not support coherent allocations at all. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Tested-by: Greg Ungerer <gerg@linux-m68k.org> |
||
|
Christoph Hellwig
|
b1da46d70e |
dma-direct: simplify the use atomic pool logic in dma_direct_alloc
The logic in dma_direct_alloc when to use the atomic pool vs remapping grew a bit unreadable. Consolidate it into a single check, and clean up the set_uncached vs remap logic a bit as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Tested-by: Greg Ungerer <gerg@linux-m68k.org> |
||
|
Christoph Hellwig
|
2c8ed1b960 |
dma-direct: add a CONFIG_ARCH_HAS_DMA_ALLOC symbol
Instead of using arch_dma_alloc if none of the generic coherent allocators are used, require the architectures to explicitly opt into providing it. This will used to deal with the case of m68knommu and coldfire where we can't do any coherent allocations whatsoever, and also makes it clear that arch_dma_alloc is a last resort. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Tested-by: Greg Ungerer <gerg@linux-m68k.org> |
||
|
Christoph Hellwig
|
da323d4640 |
dma-direct: add dependencies to CONFIG_DMA_GLOBAL_POOL
CONFIG_DMA_GLOBAL_POOL can't be combined with other DMA coherent allocators. Add dependencies to Kconfig to document this, and make kconfig complain about unmet dependencies if someone tries. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Greg Ungerer <gerg@linux-m68k.org> Tested-by: Greg Ungerer <gerg@linux-m68k.org> |
||
|
Petr Tesarik
|
2d5780bbef |
swiotlb: fix the check whether a device has used software IO TLB
When CONFIG_SWIOTLB_DYNAMIC=y, devices which do not use the software IO TLB can avoid swiotlb lookup. A flag is added by commit |
||
|
Ross Lagerwall
|
a6a241764f |
swiotlb: use the calculated number of areas
Commit |
||
|
Zhenhua Huang
|
f875db4f20 |
Revert "dma-contiguous: check for memory region overlap"
This reverts commit
|
||
|
Christoph Hellwig
|
765aa6b3a4 |
dma-pool: remove a __maybe_unused label in atomic_pool_expand
Move the #endif a line so that free_page label is only seen by the compile pass when actually used. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chunhui He <hchunhui@mail.ustc.edu.cn> Reviewed-by: Robin Murphy <roin.murphy@arm.com> |
||
|
Christoph Hellwig
|
2dcdf8c18d |
dma-contiguous: fix the Kconfig entry for CONFIG_DMA_NUMA_CMA
It makes no sense to expose CONFIG_DMA_NUMA_CMA if CONFIG_NUMA is not enabled, and random config options shouldn't be default unless there is a good reason. Replace the default NUMA with a depends on to fix both issues. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <roin.murphy@arm.com> |
||
|
Sergey Senozhatsky
|
fb5a431559 |
dma-debug: don't call __dma_entry_alloc_check_leak() under free_entries_lock
__dma_entry_alloc_check_leak() calls into printk -> serial console
output (qcom geni) and grabs port->lock under free_entries_lock
spin lock, which is a reverse locking dependency chain as qcom_geni
IRQ handler can call into dma-debug code and grab free_entries_lock
under port->lock.
Move __dma_entry_alloc_check_leak() call out of free_entries_lock
scope so that we don't acquire serial console's port->lock under it.
Trimmed-down lockdep splat:
The existing dependency chain (in reverse order) is:
-> #2 (free_entries_lock){-.-.}-{2:2}:
_raw_spin_lock_irqsave+0x60/0x80
dma_entry_alloc+0x38/0x110
debug_dma_map_page+0x60/0xf8
dma_map_page_attrs+0x1e0/0x230
dma_map_single_attrs.constprop.0+0x6c/0xc8
geni_se_rx_dma_prep+0x40/0xcc
qcom_geni_serial_isr+0x310/0x510
__handle_irq_event_percpu+0x110/0x244
handle_irq_event_percpu+0x20/0x54
handle_irq_event+0x50/0x88
handle_fasteoi_irq+0xa4/0xcc
handle_irq_desc+0x28/0x40
generic_handle_domain_irq+0x24/0x30
gic_handle_irq+0xc4/0x148
do_interrupt_handler+0xa4/0xb0
el1_interrupt+0x34/0x64
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x64/0x68
arch_local_irq_enable+0x4/0x8
____do_softirq+0x18/0x24
...
-> #1 (&port_lock_key){-.-.}-{2:2}:
_raw_spin_lock_irqsave+0x60/0x80
qcom_geni_serial_console_write+0x184/0x1dc
console_flush_all+0x344/0x454
console_unlock+0x94/0xf0
vprintk_emit+0x238/0x24c
vprintk_default+0x3c/0x48
vprintk+0xb4/0xbc
_printk+0x68/0x90
register_console+0x230/0x38c
uart_add_one_port+0x338/0x494
qcom_geni_serial_probe+0x390/0x424
platform_probe+0x70/0xc0
really_probe+0x148/0x280
__driver_probe_device+0xfc/0x114
driver_probe_device+0x44/0x100
__device_attach_driver+0x64/0xdc
bus_for_each_drv+0xb0/0xd8
__device_attach+0xe4/0x140
device_initial_probe+0x1c/0x28
bus_probe_device+0x44/0xb0
device_add+0x538/0x668
of_device_add+0x44/0x50
of_platform_device_create_pdata+0x94/0xc8
of_platform_bus_create+0x270/0x304
of_platform_populate+0xac/0xc4
devm_of_platform_populate+0x60/0xac
geni_se_probe+0x154/0x160
platform_probe+0x70/0xc0
...
-> #0 (console_owner){-...}-{0:0}:
__lock_acquire+0xdf8/0x109c
lock_acquire+0x234/0x284
console_flush_all+0x330/0x454
console_unlock+0x94/0xf0
vprintk_emit+0x238/0x24c
vprintk_default+0x3c/0x48
vprintk+0xb4/0xbc
_printk+0x68/0x90
dma_entry_alloc+0xb4/0x110
debug_dma_map_sg+0xdc/0x2f8
__dma_map_sg_attrs+0xac/0xe4
dma_map_sgtable+0x30/0x4c
get_pages+0x1d4/0x1e4 [msm]
msm_gem_pin_pages_locked+0x38/0xac [msm]
msm_gem_pin_vma_locked+0x58/0x88 [msm]
msm_ioctl_gem_submit+0xde4/0x13ac [msm]
drm_ioctl_kernel+0xe0/0x15c
drm_ioctl+0x2e8/0x3f4
vfs_ioctl+0x30/0x50
...
Chain exists of:
console_owner --> &port_lock_key --> free_entries_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(free_entries_lock);
lock(&port_lock_key);
lock(free_entries_lock);
lock(console_owner);
*** DEADLOCK ***
Call trace:
dump_backtrace+0xb4/0xf0
show_stack+0x20/0x30
dump_stack_lvl+0x60/0x84
dump_stack+0x18/0x24
print_circular_bug+0x1cc/0x234
check_noncircular+0x78/0xac
__lock_acquire+0xdf8/0x109c
lock_acquire+0x234/0x284
console_flush_all+0x330/0x454
console_unlock+0x94/0xf0
vprintk_emit+0x238/0x24c
vprintk_default+0x3c/0x48
vprintk+0xb4/0xbc
_printk+0x68/0x90
dma_entry_alloc+0xb4/0x110
debug_dma_map_sg+0xdc/0x2f8
__dma_map_sg_attrs+0xac/0xe4
dma_map_sgtable+0x30/0x4c
get_pages+0x1d4/0x1e4 [msm]
msm_gem_pin_pages_locked+0x38/0xac [msm]
msm_gem_pin_vma_locked+0x58/0x88 [msm]
msm_ioctl_gem_submit+0xde4/0x13ac [msm]
drm_ioctl_kernel+0xe0/0x15c
drm_ioctl+0x2e8/0x3f4
vfs_ioctl+0x30/0x50
...
Reported-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
||
|
Petr Tesarik
|
d069ed288a |
swiotlb: optimize get_max_slots()
Use a simple logical shift and increment to calculate the number of slots taken by the DMA segment boundary. At least GCC-13 is not able to optimize the expression, producing this horrible assembly code on x86: cmpq $-1, %rcx je .L364 addq $2048, %rcx shrq $11, %rcx movq %rcx, %r13 .L331: // rest of the function here... // after function epilogue and return: .L364: movabsq $9007199254740992, %r13 jmp .L331 After the optimization, the code looks more reasonable: shrq $11, %r11 leaq 1(%r11), %rbx Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Petr Tesarik
|
f94cb36e76 |
swiotlb: move slot allocation explanation comment where it belongs
Move the comment down in front of the loop that actually sets the list
member of struct io_tlb_slot to zero.
Fixes:
|
||
|
Petr Tesarik
|
1395706a14 |
swiotlb: search the software IO TLB only if the device makes use of it
Skip searching the software IO TLB if a device has never used it, making sure these devices are not affected by the introduction of multiple IO TLB memory pools. Additional memory barrier is required to ensure that the new value of the flag is visible to other CPUs after mapping a new bounce buffer. For efficiency, the flag check should be inlined, and then the memory barrier must be moved to is_swiotlb_buffer(). However, it can replace the existing barrier in swiotlb_find_pool(), because all callers use is_swiotlb_buffer() first to verify that the buffer address belongs to the software IO TLB. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Petr Tesarik
|
1aaa736815 |
swiotlb: allocate a new memory pool when existing pools are full
When swiotlb_find_slots() cannot find suitable slots, schedule the allocation of a new memory pool. It is not possible to allocate the pool immediately, because this code may run in interrupt context, which is not suitable for large memory allocations. This means that the memory pool will be available too late for the currently requested mapping, but the stress on the software IO TLB allocator is likely to continue, and subsequent allocations will benefit from the additional pool eventually. Keep all memory pools for an allocator in an RCU list to avoid locking on the read side. For modifications, add a new spinlock to struct io_tlb_mem. The spinlock also protects updates to the total number of slabs (nslabs in struct io_tlb_mem), but not reads of the value. Readers may therefore encounter a stale value, but this is not an issue: - swiotlb_tbl_map_single() and is_swiotlb_active() only check for non-zero value. This is ensured by the existence of the default memory pool, allocated at boot. - The exact value is used only for non-critical purposes (debugfs, kernel messages). Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Petr Tesarik
|
ad96ce3252 |
swiotlb: determine potential physical address limit
The value returned by default_swiotlb_limit() should be constant, because it is used to decide whether DMA can be used. To allow allocating memory pools on the fly, use the maximum possible physical address rather than the highest address used by the default pool. For swiotlb_init_remap(), this is either an arch-specific limit used by memblock_alloc_low(), or the highest directly mapped physical address if the initialization flags include SWIOTLB_ANY. For swiotlb_init_late(), the highest address is determined by the GFP flags. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Petr Tesarik
|
79636caad3 |
swiotlb: if swiotlb is full, fall back to a transient memory pool
Try to allocate a transient memory pool if no suitable slots can be found and the respective SWIOTLB is allowed to grow. The transient pool is just enough big for this one bounce buffer. It is inserted into a per-device list of transient memory pools, and it is freed again when the bounce buffer is unmapped. Transient memory pools are kept in an RCU list. A memory barrier is required after adding a new entry, because any address within a transient buffer must be immediately recognized as belonging to the SWIOTLB, even if it is passed to another CPU. Deletion does not require any synchronization beyond RCU ordering guarantees. After a buffer is unmapped, its physical addresses may no longer be passed to the DMA API, so the memory range of the corresponding stale entry in the RCU list never matches. If the memory range gets allocated again, then it happens only after a RCU quiescent state. Since bounce buffers can now be allocated from different pools, add a parameter to swiotlb_alloc_pool() to let the caller know which memory pool is used. Add swiotlb_find_pool() to find the memory pool corresponding to an address. This function is now also used by is_swiotlb_buffer(), because a simple boundary check is no longer sufficient. The logic in swiotlb_alloc_tlb() is taken from __dma_direct_alloc_pages(), simplified and enhanced to use coherent memory pools if needed. Note that this is not the most efficient way to provide a bounce buffer, but when a DMA buffer can't be mapped, something may (and will) actually break. At that point it is better to make an allocation, even if it may be an expensive operation. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Petr Tesarik
|
62708b2ba4 |
swiotlb: add a flag whether SWIOTLB is allowed to grow
Add a config option (CONFIG_SWIOTLB_DYNAMIC) to enable or disable dynamic allocation of additional bounce buffers. If this option is set, mark the default SWIOTLB as able to grow and restricted DMA pools as unable. However, if the address of the default memory pool is explicitly queried, make the default SWIOTLB also unable to grow. This is currently used to set up PCI BAR movable regions on some Octeon MIPS boards which may not be able to use a SWIOTLB pool elsewhere in physical memory. See octeon_pci_setup() for more details. If a remap function is specified, it must be also called on any dynamically allocated pools, but there are some issues: - The remap function may block, so it should not be called from an atomic context. - There is no corresponding unremap() function if the memory pool is freed. - The only in-tree implementation (xen_swiotlb_fixup) requires that the number of slots in the memory pool is a multiple of SWIOTLB_SEGSIZE. Keep it simple for now and disable growing the SWIOTLB if a remap function was specified. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Petr Tesarik
|
158dbe9c9a |
swiotlb: separate memory pool data from other allocator data
Carve out memory pool specific fields from struct io_tlb_mem. The original struct now contains shared data for the whole allocator, while the new struct io_tlb_pool contains data that is specific to one memory pool of (potentially) many. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Petr Tesarik
|
fea18777a7 |
swiotlb: add documentation and rename swiotlb_do_find_slots()
Add some kernel-doc comments and move the existing documentation of struct
io_tlb_slot to its correct location. The latter was forgotten in commit
|
||
|
Petr Tesarik
|
05ee774122 |
swiotlb: make io_tlb_default_mem local to swiotlb.c
SWIOTLB implementation details should not be exposed to the rest of the kernel. This will allow to make changes to the implementation without modifying non-swiotlb code. To avoid breaking existing users, provide helper functions for the few required fields. As a bonus, using a helper function to initialize struct device allows to get rid of an #ifdef in driver core. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Petr Tesarik
|
0c6874a6ac |
swiotlb: bail out of swiotlb_init_late() if swiotlb is already allocated
If swiotlb is allocated, immediately return 0, so callers do not have to check io_tlb_default_mem.nslabs explicitly. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Binglei Wang
|
3fa6456ebe |
dma-contiguous: check for memory region overlap
In the process of parsing the DTS, check whether the memory region specified by the DTS CMA node area overlaps with the kernel text memory space reserved by memblock before calling early_init_fdt_scan_reserved_mem. Signed-off-by: Binglei Wang <l3b2w1@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Yajun Deng
|
bf29bfaa54 |
dma-contiguous: support numa CMA for specified node
The kernel parameter 'cma_pernuma=' only supports reserving the same size of CMA area for each node. We need to reserve different sizes of CMA area for specified nodes if these devices belong to different nodes. Adding another kernel parameter 'numa_cma=' to reserve CMA area for the specified node. If we want to use one of these parameters, we need to enable DMA_NUMA_CMA. At the same time, print the node id in cma_declare_contiguous_nid() if CONFIG_NUMA is enabled. Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Yajun Deng
|
22e4a348f8 |
dma-contiguous: support per-numa CMA for all architectures
In the commit
|
||
|
Arnd Bergmann
|
3d6f126b15 |
dma-mapping: move arch_dma_set_mask() declaration to header
This function has a __weak definition and an override that is only used on freescale powerpc chips. The powerpc definition however does not see the declaration that is in a .c file: arch/powerpc/kernel/dma-mask.c:7:6: error: no previous prototype for 'arch_dma_set_mask' [-Werror=missing-prototypes] Move it into the linux/dma-map-ops.h header where the other arch_dma_* functions are declared. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Christoph Hellwig
|
42e584a985 |
swiotlb: unexport is_swiotlb_active
Drivers have no business looking at dma-mapping or swiotlb internals. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Juergen Gross <jgross@suse.com> |
||
|
Linus Torvalds
|
f71f64210d |
dma-mapping fixes for Linux 6.5
- swiotlb area sizing fixes (Petr Tesarik) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmSq57sLHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYOh0xAAkwklIxxzXvNlgjvy2hdgPWImPS8tGPDSIsqA9TDD WDZq89nz/ndnchdPObDvyJXmfBgqa0qCHqopBVPqMKv5a1pKZhrRXYlbajGQQwji MIqefTLZ/VGw7bDpEivOt+yadwQ3KxuxWWs7/JPKLLReSJ22H8P+jkrK7P7kBL5X YaMtZG9d86fvFHnQHKdAOlF1iCvnoZDHPcvaZbI6m5mMSZ+HIYqK5pP1MTUEAbIU MX4ZSI7/mL0q67+kZuM/NCSeq1pH0Cd0D2DGm+8k/y87G81GS6E5Wgg+xO7vYiXf 5ChuwlAO9K9KhH7NIRkKhkad/Ii89ENXSyv5gmPRoKYK5FXajnHSlJTUrZojV6XC Pbsd9ATVzV0rY61EPyh6G1a+Ttp/pwMp+W0I2fi032GVAePQ/vhB9x9O+2O/3QiC v80nUSatkciZncWqkguhp3NONsRmLKep3CCQnEAA/gLs27B0avdQeslnqbOOUQKd Si+djIoel8ONjQ+mW8eFCsVYMH1xFSo0aGsgGe0y2cyBE3DN1AW9eRnOXWT4C1PR UyDlx8ACs87ojec+YRQFYk2/PbsU7CQiH1pteXvBHcbhiVUAvrtXtg6ANQ+7066P IIduAZmlHcHb1BhyrSQbAtRllVLIp/l9IAkCSY9SvL0tjh/B5CaRBD5m2Taow5I/ KUI= =4Lfc -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: - swiotlb area sizing fixes (Petr Tesarik) * tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: reduce the number of areas to match actual memory pool size swiotlb: always set the number of areas before allocating the pool |
||
|
Linus Torvalds
|
1e6d5dea34 |
dma-mapping uodates for Linux 6.5
- swiotlb cleanups (Petr Tesarik) - use kvmalloc_array (gaoxu) - a small step towards removing is_swiotlb_active (Christoph Hellwig) - fix a Kconfig typo Sui Jingfeng) -----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmScHTELHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYOoGhAAuKdcWAumhEuKXu/vuA4/xH5Kvn2uhrAVs/RSKKh7 Wbh2WXh+9GOQs4dwpYI5/chRmCJgyC2ics/E7dny2ovJumM/RGOR9zff/+zJk5yh 3tpiZ4VW/2x/9qmoRpdQVTaj1uB2Ug8wpztUohyeEYPpjLX0/Vq/zTItAyvQs4kO vskg2u9EGwzgV4qmHWq2fjowljHS1sMZq2URKGX8JDHrwOh0+uCke626ze/WznSQ 5quWW4mE0IYq/nldIMTvJxUx6273zBMm+yoZSfFY6K0VrP3WDE5endP5oYR7d251 zNRPyWqW78HQT0z/gntaPOKDB0t7YxsWVLwam98Yv8wl1wLJQYe5sRoL7qXL0yBz cu4uTOGU6Kvw3ZHWQOk2qkGxYAxDLnaFejz8ZDCycWQA7T2+TNdaVXNnl/vE+aRN 25mnT0JtClfZOvHihhHKaiRXMKE0WgPy4vBZBT0SAUVuUR7JwtYDv/5giGf6Bi3x QwNeXAmFD75VELJoqX1KL/UiJh8FzyWZMI7l7XmDVy9lJsA1P3PO+npI8SOmA+e8 q4GSD36BxDoDE06Hg/BQcRqPohDCEsrRgfvOaa7xld9SCwe1lGaN3kDsyv6HoBzX NRS3aishdqHf21dNctjX9f+II+30NFkPbAa64B8L4tP5aQLy3bgjNLweLP9fhKgl KQs= =yYCS -----END PGP SIGNATURE----- Merge tag 'dma-mapping-6.5-2023-06-28' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - swiotlb cleanups (Petr Tesarik) - use kvmalloc_array (gaoxu) - a small step towards removing is_swiotlb_active (Christoph Hellwig) - fix a Kconfig typo Sui Jingfeng) * tag 'dma-mapping-6.5-2023-06-28' of git://git.infradead.org/users/hch/dma-mapping: drm/nouveau: stop using is_swiotlb_active swiotlb: use the atomic counter of total used slabs if available swiotlb: remove unused field "used" from struct io_tlb_mem dma-remap: use kvmalloc_array/kvfree for larger dma memory remap dma-mapping: fix a Kconfig typo |
||
|
Petr Tesarik
|
8ac0406335 |
swiotlb: reduce the number of areas to match actual memory pool size
Although the desired size of the SWIOTLB memory pool is increased in
swiotlb_adjust_nareas() to match the number of areas, the actual allocation
may be smaller, which may require reducing the number of areas.
For example, Xen uses swiotlb_init_late(), which in turn uses the page
allocator. On x86, page size is 4 KiB and MAX_ORDER is 10 (1024 pages),
resulting in a maximum memory pool size of 4 MiB. This corresponds to 2048
slots of 2 KiB each. The minimum area size is 128 (IO_TLB_SEGSIZE),
allowing at most 2048 / 128 = 16 areas.
If num_possible_cpus() is greater than the maximum number of areas, areas
are smaller than IO_TLB_SEGSIZE and contiguous groups of free slots will
span multiple areas. When allocating and freeing slots, only one area will
be properly locked, causing race conditions on the unlocked slots and
ultimately data corruption, kernel hangs and crashes.
Fixes:
|
||
|
Petr Tesarik
|
aabd12609f |
swiotlb: always set the number of areas before allocating the pool
The number of areas defaults to the number of possible CPUs. However, the
total number of slots may have to be increased after adjusting the number
of areas. Consequently, the number of areas must be determined before
allocating the memory pool. This is even explained with a comment in
swiotlb_init_remap(), but swiotlb_init_late() adjusts the number of areas
after slots are already allocated. The areas may end up being smaller than
IO_TLB_SEGSIZE, which breaks per-area locking.
While fixing swiotlb_init_late(), move all relevant comments before the
definition of swiotlb_adjust_nareas() and convert them to kernel-doc.
Fixes:
|
||
|
Catalin Marinas
|
370645f41e |
dma-mapping: force bouncing if the kmalloc() size is not cache-line-aligned
For direct DMA, if the size is small enough to have originated from a kmalloc() cache below ARCH_DMA_MINALIGN, check its alignment against dma_get_cache_alignment() and bounce if necessary. For larger sizes, it is the responsibility of the DMA API caller to ensure proper alignment. At this point, the kmalloc() caches are properly aligned but this will change in a subsequent patch. Architectures can opt in by selecting DMA_BOUNCE_UNALIGNED_KMALLOC. Link: https://lkml.kernel.org/r/20230612153201.554742-15-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Isaac J. Manjarres <isaacmanjarres@google.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Mike Snitzer <snitzer@kernel.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Saravana Kannan <saravanak@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Robin Murphy
|
cb147bbe22 |
dma-mapping: name SG DMA flag helpers consistently
sg_is_dma_bus_address() is inconsistent with the naming pattern of its corresponding setters and its own kerneldoc, so take the majority vote and rename it sg_dma_is_bus_address() (and fix up the missing underscores in the kerneldoc too). This gives us a nice clear pattern where SG DMA flags are SG_DMA_<NAME>, and the helpers for acting on them are sg_dma_<action>_<name>(). Link: https://lkml.kernel.org/r/20230612153201.554742-14-catalin.marinas@arm.com Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/fa2eca2862c7ffc41b50337abffb2dfd2864d3ea.1685036694.git.robin.murphy@arm.com Tested-by: Isaac J. Manjarres <isaacmanjarres@google.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Mike Snitzer <snitzer@kernel.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Saravana Kannan <saravanak@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Robin Murphy
|
af2880ec44 |
scatterlist: add dedicated config for DMA flags
The DMA flags field will be useful for users beyond PCI P2P, so upgrade to its own dedicated config option. [catalin.marinas@arm.com: use #ifdef CONFIG_NEED_SG_DMA_FLAGS in scatterlist.h] [catalin.marinas@arm.com: update PCI_P2PDMA dma_flags comment in scatterlist.h] Link: https://lkml.kernel.org/r/20230612153201.554742-13-catalin.marinas@arm.com Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Isaac J. Manjarres <isaacmanjarres@google.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jerry Snitselaar <jsnitsel@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Mike Snitzer <snitzer@kernel.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Saravana Kannan <saravanak@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Petr Tesarik
|
693405cf11 |
swiotlb: use the atomic counter of total used slabs if available
If DEBUG_FS is enabled, the cost of keeping an exact number of total used slabs is already paid. In this case, there is no reason to use an inexact number for statistics and kernel messages. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
gaoxu
|
51ff97d54f |
dma-remap: use kvmalloc_array/kvfree for larger dma memory remap
If dma_direct_alloc() alloc memory in size of 64MB, the inner function dma_common_contiguous_remap() will allocate 128KB memory by invoking the function kmalloc_array(). and the kmalloc_array seems to fail to try to allocate 128KB mem. Call trace: [14977.928623] qcrosvm: page allocation failure: order:5, mode:0x40cc0 [14977.928638] dump_backtrace.cfi_jt+0x0/0x8 [14977.928647] dump_stack_lvl+0x80/0xb8 [14977.928652] warn_alloc+0x164/0x200 [14977.928657] __alloc_pages_slowpath+0x9f0/0xb4c [14977.928660] __alloc_pages+0x21c/0x39c [14977.928662] kmalloc_order+0x48/0x108 [14977.928666] kmalloc_order_trace+0x34/0x154 [14977.928668] __kmalloc+0x548/0x7e4 [14977.928673] dma_direct_alloc+0x11c/0x4f8 [14977.928678] dma_alloc_attrs+0xf4/0x138 [14977.928680] gh_vm_ioctl_set_fw_name+0x3c4/0x610 [gunyah] [14977.928698] gh_vm_ioctl+0x90/0x14c [gunyah] [14977.928705] __arm64_sys_ioctl+0x184/0x210 work around by doing kvmalloc_array instead. Signed-off-by: Gao Xu <gaoxu2@hihonor.com> Reviewed-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Sui Jingfeng
|
4d3af20eaf |
dma-mapping: fix a Kconfig typo
'thing' -> 'think' Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Linus Torvalds
|
b28e6315a0 |
dma-mapping updates for Linux 6.4
- fix a PageHighMem check in dma-coherent initialization (Doug Berger)
- clean up the coherency defaul initialiation (Jiaxun Yang)
- add cacheline to user/kernel dma-debug space dump messages
(Desnes Nunes, Geert Uytterhoeve)
- swiotlb statistics improvements (Michael Kelley)
- misc cleanups (Petr Tesarik)
-----BEGIN PGP SIGNATURE-----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=vAit
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.4-2023-04-28' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- fix a PageHighMem check in dma-coherent initialization (Doug Berger)
- clean up the coherency defaul initialiation (Jiaxun Yang)
- add cacheline to user/kernel dma-debug space dump messages (Desnes
Nunes, Geert Uytterhoeve)
- swiotlb statistics improvements (Michael Kelley)
- misc cleanups (Petr Tesarik)
* tag 'dma-mapping-6.4-2023-04-28' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: Omit total_used and used_hiwater if !CONFIG_DEBUG_FS
swiotlb: track and report io_tlb_used high water marks in debugfs
swiotlb: fix debugfs reporting of reserved memory pools
swiotlb: relocate PageHighMem test away from rmem_swiotlb_setup
of: address: always use dma_default_coherent for default coherency
dma-mapping: provide CONFIG_ARCH_DMA_DEFAULT_COHERENT
dma-mapping: provide a fallback dma_default_coherent
dma-debug: Use %pa to format phys_addr_t
dma-debug: add cacheline to user/kernel space dump messages
dma-debug: small dma_debug_entry's comment and variable name updates
dma-direct: cleanup parameters to dma_direct_optimal_gfp_mask
|
||
|
Linus Torvalds
|
7fa8a8ee94 |
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page().
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather
than exclusive, and has fixed a bunch of errors which were caused by its
unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA
jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96
eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY=
=J+Dj
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
|
||
|
Linus Torvalds
|
da46b58ff8 |
hyperv-next for v6.4
-----BEGIN PGP SIGNATURE----- iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmRHJSgTHHdlaS5saXVA a2VybmVsLm9yZwAKCRB2FHBfkEGgXjSOCAClsmFmyP320yAB74vQer5cSzxbIpFW 3qt/P3D8zABn0UxjjmD8+LTHuyB+72KANU6qQ9No6zdYs8yaA1vGX8j8UglWWHuj fmaAD4DuZl+V+fmqDgHukgaPlhakmW0m5tJkR+TW3kCgnyrtvSWpXPoxUAe6CLvj Kb/SPl6ylHRWlIAEZ51gy0Ipqxjvs5vR/h9CWpTmRMuZvxdWUro2Cm82wJgzXPqq 3eLbAzB29kLFEIIUpba9a/rif1yrWgVFlfpuENFZ+HUYuR78wrPB9evhwuPvhXd2 +f+Wk0IXORAJo8h7aaMMIr6bd4Lyn98GPgmS5YSe92HRIqjBvtYs3Dq8 =F6+n -----END PGP SIGNATURE----- Merge tag 'hyperv-next-signed-20230424' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - PCI passthrough for Hyper-V confidential VMs (Michael Kelley) - Hyper-V VTL mode support (Saurabh Sengar) - Move panic report initialization code earlier (Long Li) - Various improvements and bug fixes (Dexuan Cui and Michael Kelley) * tag 'hyperv-next-signed-20230424' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits) PCI: hv: Replace retarget_msi_interrupt_params with hyperv_pcpu_input_arg Drivers: hv: move panic report code from vmbus to hv early init code x86/hyperv: VTL support for Hyper-V Drivers: hv: Kconfig: Add HYPERV_VTL_MODE x86/hyperv: Make hv_get_nmi_reason public x86/hyperv: Add VTL specific structs and hypercalls x86/init: Make get/set_rtc_noop() public x86/hyperv: Exclude lazy TLB mode CPUs from enlightened TLB flushes x86/hyperv: Add callback filter to cpumask_to_vpset() Drivers: hv: vmbus: Remove the per-CPU post_msg_page clocksource: hyper-v: make sure Invariant-TSC is used if it is available PCI: hv: Enable PCI pass-thru devices in Confidential VMs Drivers: hv: Don't remap addresses that are above shared_gpa_boundary hv_netvsc: Remove second mapping of send and recv buffers Drivers: hv: vmbus: Remove second way of mapping ring buffers Drivers: hv: vmbus: Remove second mapping of VMBus monitor pages swiotlb: Remove bounce buffer remapping for Hyper-V Driver: VMBus: Add Devicetree support dt-bindings: bus: Add Hyper-V VMBus Drivers: hv: vmbus: Convert acpi_device to more generic platform_device ... |
||
|
Linus Torvalds
|
b6a7828502 |
modules-6.4-rc1
The summary of the changes for this pull requests is:
* Song Liu's new struct module_memory replacement
* Nick Alcock's MODULE_LICENSE() removal for non-modules
* My cleanups and enhancements to reduce the areas where we vmalloc
module memory for duplicates, and the respective debug code which
proves the remaining vmalloc pressure comes from userspace.
Most of the changes have been in linux-next for quite some time except
the minor fixes I made to check if a module was already loaded
prior to allocating the final module memory with vmalloc and the
respective debug code it introduces to help clarify the issue. Although
the functional change is small it is rather safe as it can only *help*
reduce vmalloc space for duplicates and is confirmed to fix a bootup
issue with over 400 CPUs with KASAN enabled. I don't expect stable
kernels to pick up that fix as the cleanups would have also had to have
been picked up. Folks on larger CPU systems with modules will want to
just upgrade if vmalloc space has been an issue on bootup.
Given the size of this request, here's some more elaborate details
on this pull request.
The functional change change in this pull request is the very first
patch from Song Liu which replaces the struct module_layout with a new
struct module memory. The old data structure tried to put together all
types of supported module memory types in one data structure, the new
one abstracts the differences in memory types in a module to allow each
one to provide their own set of details. This paves the way in the
future so we can deal with them in a cleaner way. If you look at changes
they also provide a nice cleanup of how we handle these different memory
areas in a module. This change has been in linux-next since before the
merge window opened for v6.3 so to provide more than a full kernel cycle
of testing. It's a good thing as quite a bit of fixes have been found
for it.
Jason Baron then made dynamic debug a first class citizen module user by
using module notifier callbacks to allocate / remove module specific
dynamic debug information.
Nick Alcock has done quite a bit of work cross-tree to remove module
license tags from things which cannot possibly be module at my request
so to:
a) help him with his longer term tooling goals which require a
deterministic evaluation if a piece a symbol code could ever be
part of a module or not. But quite recently it is has been made
clear that tooling is not the only one that would benefit.
Disambiguating symbols also helps efforts such as live patching,
kprobes and BPF, but for other reasons and R&D on this area
is active with no clear solution in sight.
b) help us inch closer to the now generally accepted long term goal
of automating all the MODULE_LICENSE() tags from SPDX license tags
In so far as a) is concerned, although module license tags are a no-op
for non-modules, tools which would want create a mapping of possible
modules can only rely on the module license tag after the commit
|
||
|
Petr Tesarik
|
ec274aff21 |
swiotlb: Omit total_used and used_hiwater if !CONFIG_DEBUG_FS
The tracking of used_hiwater adds an atomic operation to the hot path. This is acceptable only when debugging the kernel. To make sure that the fields can never be used by mistake, do not even include them in struct io_tlb_mem if CONFIG_DEBUG_FS is not set. The build fails after doing that. To fix it, it is necessary to remove all code specific to debugfs and instead provide a stub implementation of swiotlb_create_debugfs_files(). As a bonus, this change allows to remove one __maybe_unused attribute. Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Michael Kelley
|
0459ff4873 |
swiotlb: Remove bounce buffer remapping for Hyper-V
With changes to how Hyper-V guest VMs flip memory between private (encrypted) and shared (decrypted), creating a second kernel virtual mapping for shared memory is no longer necessary. Everything needed for the transition to shared is handled by set_memory_decrypted(). As such, remove swiotlb_unencrypted_base and the associated code. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/1679838727-87310-8-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> |
||
|
Michael Kelley
|
8b0977ecc8 |
swiotlb: track and report io_tlb_used high water marks in debugfs
swiotlb currently reports the total number of slabs and the instantaneous in-use slabs in debugfs. But with increased usage of swiotlb for all I/O in Confidential Computing (coco) VMs, it has become difficult to know how much memory to allocate for swiotlb bounce buffers, either via the automatic algorithm in the kernel or by specifying a value on the kernel boot line. The current automatic algorithm generously allocates swiotlb bounce buffer memory, and may be wasting significant memory in many use cases. To support better understanding of swiotlb usage, add tracking of the the high water mark for usage of the default swiotlb bounce buffer memory pool and any reserved memory pools. Report these high water marks in debugfs along with the other swiotlb pool metrics. Allow the high water marks to be reset to zero at runtime by writing to them. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Michael Kelley
|
5499d01c02 |
swiotlb: fix debugfs reporting of reserved memory pools
For io_tlb_nslabs, the debugfs code reports the correct value for a
specific reserved memory pool. But for io_tlb_used, the value reported
is always for the default pool, not the specific reserved pool. Fix this.
Fixes:
|
||
|
Doug Berger
|
a90922fa25 |
swiotlb: relocate PageHighMem test away from rmem_swiotlb_setup
The reservedmem_of_init_fn's are invoked very early at boot before the
memory zones have even been defined. This makes it inappropriate to test
whether the page corresponding to a PFN is in ZONE_HIGHMEM from within
one.
Removing the check allows an ARM 32-bit kernel with SPARSEMEM enabled to
boot properly since otherwise we would be de-referencing an
uninitialized sparsemem map to perform pfn_to_page() check.
The arm64 architecture happens to work (and also has no high memory) but
other 32-bit architectures could also be having similar issues.
While it would be nice to provide early feedback about a reserved DMA
pool residing in highmem, it is not possible to do that until the first
time we try to use it, which is where the check is moved to.
Fixes:
|
||
|
Nick Alcock
|
114da4b026 |
dma-mapping: benchmark: remove MODULE_LICENSE in non-modules
Since commit
|
||
|
Jiaxun Yang
|
1d3f56b295 |
dma-mapping: provide CONFIG_ARCH_DMA_DEFAULT_COHERENT
Provide a kconfig option to allow arches to manipulate default value of dma_default_coherent in Kconfig. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Jiaxun Yang
|
fe4e5efa40 |
dma-mapping: provide a fallback dma_default_coherent
dma_default_coherent was decleared unconditionally at kernel/dma/mapping.c but only decleared when any of non-coherent options is enabled in dma-map-ops.h. Guard the declaration in mapping.c with non-coherent options and provide a fallback definition. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Petr Tesarik
|
bbb73a103f |
swiotlb: fix a braino in the alignment check fix
The alignment mask in swiotlb_do_find_slots() masks off the high
bits which are not relevant for the alignment, so multiple
requirements are combined with a bitwise OR rather than AND.
In plain English, the stricter the alignment, the more bits must
be set in iotlb_align_mask.
Confusion may arise from the fact that the same variable is also
used to mask off the offset within a swiotlb slot, which is
achieved with a bitwise AND.
Fixes:
|
||
|
Kirill A. Shutemov
|
23baf831a3 |
mm, treewide: redefine MAX_ORDER sanely
MAX_ORDER currently defined as number of orders page allocator supports: user can ask buddy allocator for page order between 0 and MAX_ORDER-1. This definition is counter-intuitive and lead to number of bugs all over the kernel. Change the definition of MAX_ORDER to be inclusive: the range of orders user can ask from buddy allocator is 0..MAX_ORDER now. [kirill@shutemov.name: fix min() warning] Link: https://lkml.kernel.org/r/20230315153800.32wib3n5rickolvh@box [akpm@linux-foundation.org: fix another min_t warning] [kirill@shutemov.name: fixups per Zi Yan] Link: https://lkml.kernel.org/r/20230316232144.b7ic4cif4kjiabws@box.shutemov.name [akpm@linux-foundation.org: fix underlining in docs] Link: https://lore.kernel.org/oe-kbuild-all/202303191025.VRCTk6mP-lkp@intel.com/ Link: https://lkml.kernel.org/r/20230315113133.11326-11-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Geert Uytterhoeven
|
b31507dcaf |
dma-debug: Use %pa to format phys_addr_t
On 32-bit without LPAE:
kernel/dma/debug.c: In function ‘debug_dma_dump_mappings’:
kernel/dma/debug.c:537:7: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 9 has type ‘phys_addr_t’ {aka ‘unsigned int’} [-Wformat=]
kernel/dma/debug.c: In function ‘dump_show’:
kernel/dma/debug.c:568:59: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 11 has type ‘phys_addr_t’ {aka ‘unsigned int’} [-Wformat=]
Fixes:
|
||
|
Desnes Nunes
|
bd89d69a52 |
dma-debug: add cacheline to user/kernel space dump messages
Having the cacheline also printed on the debug_dma_dump_mappings() and dump_show() is useful for debugging. Furthermore, this also standardizes the messages shown on both dump functions. Signed-off-by: Desnes Nunes <desnesn@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Desnes Nunes
|
479623fd0c |
dma-debug: small dma_debug_entry's comment and variable name updates
Small update on dma_debug_entry's struct commentary and also standardize the usage of 'dma_addr' variable name from debug_dma_map_page() on debug_dma_unmap_page(), and similarly on debug_dma_free_coherent() Signed-off-by: Desnes Nunes <desnesn@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |
||
|
Petr Tesarik
|
25a4ce5649 |
dma-direct: cleanup parameters to dma_direct_optimal_gfp_mask
Since both callers of dma_direct_optimal_gfp_mask() pass dev->coherent_dma_mask as the second argument, it is better to remove that parameter altogether. Not only is reducing number of parameters good for readability, but the new function signature is also more logical: The optimal flags depend only on data contained in struct device. While touching this code, let's also rename phys_mask to phys_limit in dma_direct_alloc_from_pool(), because it is indeed a limit. Signed-off-by: Petr Tesarik <petrtesarik@huaweicloud.com> Signed-off-by: Christoph Hellwig <hch@lst.de> |