mirror of
https://github.com/torvalds/linux.git
synced 2026-08-03 22:10:38 +02:00
bf94dea7fd
39162 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Jihed Chaibi
|
4a372798e1 |
dt-bindings: gpio: ti,twl4030: Correct the schema $id path
The $id for a binding should match its file path. The ti,twl4030-gpio binding is located in the gpio/ subdirectory but was missing this from its $id. Correct the path to follow the standard convention. Fixes: |
||
|
Linus Torvalds
|
58fdd8484c |
sound fixes for 6.18-rc4
A collection of small fixes. It became slightly bigger than usual
due to timing issues (holidays, etc), but all changes are rather
device-specific fixes, so not really worrisome.
- ASoC Cirrus codec fixes for AMD
- Various fixes for ASoC Intel AVS, Qualcomm, SoundWire, FSL,
Mediatek, Renesas,
- A few HD-audio quirks, and USB-audio regression fixes for Presonus
-----BEGIN PGP SIGNATURE-----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=8X1t
-----END PGP SIGNATURE-----
Merge tag 'sound-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. It became slightly bigger than usual due
to timing issues (holidays, etc), but all changes are rather
device-specific fixes, so not really worrisome.
- ASoC Cirrus codec fixes for AMD
- Various fixes for ASoC Intel AVS, Qualcomm, SoundWire, FSL,
Mediatek, Renesas
- A few HD-audio quirks, and USB-audio regression fixes for Presonus"
* tag 'sound-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
ALSA: hda/realtek: Enable mic on Vaio RPL
ASoC: dt-bindings: pm4125-sdw: correct number of soundwire ports
ASoC: renesas: rz-ssi: Use proper dma_buffer_pos after resume
ASoC: soc_sdw_utils: remove cs42l43 component_name
ASoC: fsl_sai: Fix sync error in consumer mode
ASoC: Fix build for sdw_utils
ALSA: hda/realtek: Fix mute led for HP Victus 15-fa1xxx (MB 8C2D)
ASoC: rt721: fix prepare clock stop failed
ALSA: usb-audio: don't log messages meant for 1810c when initializing 1824c
ASoC: mediatek: Fix double pm_runtime_disable in remove functions
ASoC: fsl_micfil: correct the endian format for DSD
ASoC: fsl_sai: fix bit order for DSD format
ASoC: Intel: avs: Use snd_codec format when initializing probe
ASoC: Intel: avs: Disable periods-elapsed work when closing PCM
ASoC: Intel: avs: Unprepare a stream when XRUN occurs
ASoC: sdw_utils: add name_prefix for rt1321 part id
ASoC: qdsp6: q6asm: do not sleep while atomic
ASoC: Intel: soc-acpi-intel-ptl-match: Remove cs42l43 match from sdw link3
ASOC: max98090/91: fix for filter configuration: AHPF removed DMIC2_HPF added
ASoC: amd: acp: Add ACP7.0 match entries for cs35l56 and cs42l43
...
|
||
|
Linus Torvalds
|
e576349123 |
Including fixes from wireless, Bluetooth and netfilter.
Current release - regressions:
- tcp: fix too slow tcp_rcvbuf_grow() action
- bluetooth: fix corruption in h4_recv_buf() after cleanup
Previous releases - regressions:
- mptcp: restore window probe
- bluetooth:
- fix connection cleanup with BIG with 2 or more BIS
- fix crash in set_mesh_sync and set_mesh_complete
- batman-adv: release references to inactive interfaces
- nic: ice: fix usage of logical PF id
- nic: sfc: fix potential memory leak in efx_mae_process_mport()
Previous releases - always broken:
- devmem: refresh devmem TX dst in case of route invalidation
- netfilter: add seqadj extension for natted connections
- wifi:
- iwlwifi: fix potential use after free in iwl_mld_remove_link()
- brcmfmac: fix crash while sending action frames in standalone AP Mode
- eth: mlx5e: cancel tls RX async resync request in error flows
- eth: ixgbe: fix memory leak and use-after-free in ixgbe_recovery_probe()
- eth: hibmcge: fix rx buf avl irq is not re-enabled in irq_handle issue
- eth: cxgb4: fix potential use-after-free in ipsec callback
- eth: nfp: fix memory leak in nfp_net_alloc()
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmkDctUSHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkLSQP/1jXD3wLztnTT32+AItyg+R+Sf8EJN78
hJHI1Kp9zJIdgdwnokMMTohfuSjtrXJ3HSk6RyfZnd3lD8Qo1krp4Dy9CQR0lvzb
STNvjmA4Lbs/pS2EjSeMxAkrY0JbWyQ2X0NPrp8ZilqLYyGe8/wqq7eKR9OVZjwR
XMgFlpPncPhMAfTaN6TRHy+YoxGp+ItiGWdX1n0tW2cBpOMNH5lKHz3Qp19SvumU
G9ilscybTQP7EJQKvGsa76Lwl1djFFuK4BXTn3TTIieds943/l6lG5PvSOKVqhTl
Nth6+EsbkQiC/R6rLFdzzM5D8L2ZSD2on6AX7owDF5DN02PiwamwXc+1W8KWBI73
ShiWzYJ78m4nqesWMqCgCTcjv16npW9UuemeWavumAruRpEuy6Ffa3BAKTqDiwVX
tHFms8q8NCgEQ7r3IPdbNZwx3Z/Sig/wvAzrC23jrth1/wDeaJ2nqBmQ+S4dt9HC
wGTZyKfU0oGfvKydZQJjGZM+OOB3J1EeOad/+7fxikFFQ/KDBIUzeJZdzJa0Ba64
rkKR6McggdreYFfS3jVM8iwD+bLk77JBJGd3SQhFZlkk55RYCeIRHEEhVdX1tjon
bgr1Fh0hqyVQkDmJCUpj91y2ulUmI9CJRWybtoH2w8QR90pMSgC/egAtigo1595c
LY8LDoe4NxKD
=6//1
-----END PGP SIGNATURE-----
Merge tag 'net-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wireless, Bluetooth and netfilter.
Current release - regressions:
- tcp: fix too slow tcp_rcvbuf_grow() action
- bluetooth: fix corruption in h4_recv_buf() after cleanup
Previous releases - regressions:
- mptcp: restore window probe
- bluetooth:
- fix connection cleanup with BIG with 2 or more BIS
- fix crash in set_mesh_sync and set_mesh_complete
- batman-adv: release references to inactive interfaces
- nic:
- ice: fix usage of logical PF id
- sfc: fix potential memory leak in efx_mae_process_mport()
Previous releases - always broken:
- devmem: refresh devmem TX dst in case of route invalidation
- netfilter: add seqadj extension for natted connections
- wifi:
- iwlwifi: fix potential use after free in iwl_mld_remove_link()
- brcmfmac: fix crash while sending action frames in standalone AP Mode
- eth:
- mlx5e: cancel tls RX async resync request in error flows
- ixgbe: fix memory leak and use-after-free in ixgbe_recovery_probe()
- hibmcge: fix rx buf avl irq is not re-enabled in irq_handle issue
- cxgb4: fix potential use-after-free in ipsec callback
- nfp: fix memory leak in nfp_net_alloc()"
* tag 'net-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
net: sctp: fix KMSAN uninit-value in sctp_inq_pop
net: devmem: refresh devmem TX dst in case of route invalidation
net: stmmac: est: Fix GCL bounds checks
net: stmmac: Consider Tx VLAN offload tag length for maxSDU
net: stmmac: vlan: Disable 802.1AD tag insertion offload
net/mlx5e: kTLS, Cancel RX async resync request in error flows
net: tls: Cancel RX async resync request on rcd_delta overflow
net: tls: Change async resync helpers argument
net: phy: dp83869: fix STRAP_OPMODE bitmask
selftests: net: use BASH for bareudp testing
net: mctp: Fix tx queue stall
net/mlx5: Don't zero user_count when destroying FDB tables
net: usb: asix_devices: Check return value of usbnet_get_endpoints
mptcp: zero window probe mib
mptcp: restore window probe
mptcp: fix MSG_PEEK stream corruption
mptcp: drop bogus optimization in __mptcp_check_push()
netconsole: Fix race condition in between reader and writer of userdata
Documentation: netconsole: Remove obsolete contact people
nfp: xsk: fix memory leak in nfp_net_alloc()
...
|
||
|
Srinivas Kandagatla
|
5e5c8aa73d
|
ASoC: dt-bindings: pm4125-sdw: correct number of soundwire ports
For some reason we ended up limiting the number of soundwire ports to 2
in the bindings, the actual codec supports 4 rx and 5 tx ports.
Fixes:
|
||
|
Krzysztof Kozlowski
|
210b35d6a7 |
dt-bindings: net: sparx5: Narrow properly LAN969x register space windows
Commit |
||
|
Linus Torvalds
|
aa6085a067 |
tty/serial driver bugfixes for 6.18-rc3
Here are some small tty and serial driver fixes for reported issues. Included in here are: - sh-sci serial driver fixes - 8250_dw and _mtk driver fixes - sc16is7xx driver bugfix - new 8250_exar device ids added All of these have been in linux-next this past week with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaP4mow8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykXPACfVp7KKDyM+10AxrV/xccYT53iUaAAoMQEWvES /0acQXalH6XunybjHkOd =cBYS -----END PGP SIGNATURE----- Merge tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small tty and serial driver fixes for reported issues. Included in here are: - sh-sci serial driver fixes - 8250_dw and _mtk driver fixes - sc16is7xx driver bugfix - new 8250_exar device ids added All of these have been in linux-next this past week with no reported issues" * tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_mtk: Enable baud clock and manage in runtime PM serial: 8250_dw: handle reset control deassert error dt-bindings: serial: sh-sci: Fix r8a78000 interrupts serial: sc16is7xx: remove useless enable of enhanced features serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018 tty: serial: sh-sci: fix RSCI FIFO overrun handling |
||
|
Linus Torvalds
|
6190d0fa18 |
USB driver fixes for 6.18-rc3
Here are some small USB driver fixes and new device ids for 6.18-rc3. Included in here are: - new option serial driver device ids added - dt bindings fixes for numerous platforms - xhci bugfixes for many reported regressions - usbio dependency bugfix - dwc3 driver fix - raw-gadget bugfix All of these have been in linux-next this week with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaP4nSw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yliXgCfZzBRNhHGVV0gQrBy2dz9owzfhLQAoISf3He8 dwzYP7TSYXungxfq9dSL =NaGG -----END PGP SIGNATURE----- Merge tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver fixes from Greg KH: "Here are some small USB driver fixes and new device ids for 6.18-rc3. Included in here are: - new option serial driver device ids added - dt bindings fixes for numerous platforms - xhci bugfixes for many reported regressions - usbio dependency bugfix - dwc3 driver fix - raw-gadget bugfix All of these have been in linux-next this week with no reported issues" * tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: option: add Telit FN920C04 ECM compositions USB: serial: option: add Quectel RG255C tcpm: switch check for role_sw device with fw_node usb/core/quirks: Add Huawei ME906S to wakeup quirk usb: raw-gadget: do not limit transfer length USB: serial: option: add UNISOC UIS7720 xhci: dbc: enable back DbC in resume if it was enabled before suspend xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event usb: xhci-pci: Fix USB2-only root hub registration dt-bindings: usb: qcom,snps-dwc3: Fix bindings for X1E80100 usb: misc: Add x86 dependency for Intel USBIO driver dt-bindings: usb: switch: split out ports definition usb: dwc3: Don't call clk_bulk_disable_unprepare() twice dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mp |
||
|
Linus Torvalds
|
58834e2d3e |
spi: Fixes for v6.18
A moderately large collection of device specific changes here, mostly fixes but also including a few new quirks and device IDs. This is all fairly routine even for the affected devices. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmj7d0kACgkQJNaLcl1U h9DNGgf+KWDwiPttn2gYGm4h5uEDix23aO7FOaRTAoFihWDaqvCz4V+wukRqdRE2 eyxfwQmupdQV+X+/a+ufBnQfHerHUjt2MUxZgBQTMgZ+JwFYVAtiyJszuCPw7LJH h88UUIhQhkbtshDScNIzwTaEZ7ZMubULKIayxuweHIV0tToTrDpra5WQbMzApcyb chvfY15sVncZizGxxgfdkFgK4MjKWzDzQNws4ik4XBq+aIX/AxgndoV8wgQW7pyq CXNsYWE70J9n+pSqBFpSSlEYvOlx/Tca4s342rRZyY7lKZHwq3PkhhGqp4BsQcMj t6+mpgdgmhQpT6fu42RxHM40y/XfWA== =3b9V -----END PGP SIGNATURE----- Merge tag 'spi-fix-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A moderately large collection of device specific changes here, mostly fixes but also including a few new quirks and device IDs. This is all fairly routine even for the affected devices" * tag 'spi-fix-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: dt-bindings: spi-rockchip: Add RK3506 compatible spi: intel-pci: Add support for Intel Wildcat Lake SPI serial flash spi: intel-pci: Add support for Arrow Lake-H SPI serial flash spi: intel: Add support for 128M component density spi: airoha: fix reading/writing of flashes with more than one plane per lun spi: airoha: switch back to non-dma mode in the case of error spi: airoha: add support of dual/quad wires spi modes to exec_op() handler spi: airoha: return an error for continuous mode dirmap creation cases spi: amlogic: fix spifc build error spi: cadence-quadspi: Fix pm_runtime unbalance on dma EPROBE_DEFER spi: spi-nxp-fspi: limit the clock rate for different sample clock source selection spi: spi-nxp-fspi: add extra delay after dll locked spi: spi-nxp-fspi: re-config the clock rate when operation require new clock rate spi: dw-mmio: add error handling for reset_control_deassert() spi: rockchip-sfc: Fix DMA-API usage spi: dt-bindings: cadence: add soc-specific compatible strings for zynqmp and versal-net |
||
|
Linus Torvalds
|
43e9ad0c55 |
SCSI fixes on 20251022
All driver fixes. The big change is the storvsc one to rejig the hyper-v channel handling to be more efficient for SMP virtual machines. Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> -----BEGIN PGP SIGNATURE----- iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaPkVaxsUgAAAAAAEAA5t YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy c2hpcC5jb20ACgkQ50LJTO6YrIViLgD+L8yF/GV9a3JzXbdaM24RzhgR9c4exIrG XlHyqBIl6nAA/0Vj2vNNRNMGe0NCJJ7qyWFfH9ecYrqASa+9NQnjBfL8 =8LEK -----END PGP SIGNATURE----- Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "All driver fixes. The big change is the storvsc one to rejig the hyper-v channel handling to be more efficient for SMP virtual machines" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: phy: dt-bindings: Add QMP UFS PHY compatible for Kaanapali scsi: ufs: qcom: dt-bindings: Document the Kaanapali UFS controller scsi: libfc: Prevent integer overflow in fc_fcp_recv_data() scsi: qla4xxx: Fix typos in comments scsi: storvsc: Prefer returning channel with the same CPU as on the I/O issuing CPU |
||
|
Heiko Stuebner
|
1b82413426
|
spi: dt-bindings: spi-rockchip: Add RK3506 compatible
The SPI controller found in the RK3506 SoC is still compatible to the original one introduced with the RK3066, so add the RK3506 compatible to the list of its variants. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patch.msgid.link/20251022004200.204276-1-heiko@sntech.de Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Geert Uytterhoeven
|
ea9f6d3167 |
dt-bindings: serial: sh-sci: Fix r8a78000 interrupts
The SCIF instances on R-Car Gen5 have a single interrupt, just like on
other R-Car SoCs.
Fixes:
|
||
|
Linus Torvalds
|
1422424187 |
sound fixes for 6.18-rc2
A collection of small fixes. All changes are rather boring
device-specific fixes and quirks.
- A few fixes for missing NULL checks
- ASoC NAU8821 fixes for jack and irq handling
- Various fixes for ASoC TAS2781, IDT821034, sc8280xp, max9809x,
wcd938x, and SoundWire
- Usual HD-audio and USB-audio quirks
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmjyWIMOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE8pnA//aBNWUaEDDTlNzIRyMC8oKhWJhJPxFW7itXch
OF6pfGKJNczyhEResn7R5tYtXMpsaZWVu6no42yxOHkYGV7Xw3gV03hTuK6Egio1
T9CVQ1DjokUw+XxACfmo5gKDTq/tl6LwmsrTU5i4zTlMrl8FRwPw9l7A20/JUNpX
OM6Rp8RAWEhr8dIbmgfZITUOJ4irjzoQ0gUxrodQ5Dc/uuZAKGTeIQdaIg/K1uN6
1eyG3V8gOrt7im0YbIlzVDj6W/bKJckzVUADMiq3ZKXV7H5QELMcKzXzIbkwSZi4
E12q5PjkRarLyjDabKM6XJgjfROin08VDlEUaccCANBB9a13jqICzowfd0EXvUZW
JRgSbJKpKMewYk2BJV7Y9I+ScFBfdVZE0ZtiCYPyTJEvVNzeplOxLNqyqGLP/s+s
EM7hxwGy9vnLMQhbWpP4CclzKUnDeb+PTxnj0p6osXnF0c++0DhxuF1IkZnjQ0xC
wXS3uiTwqXOCYOlL6VP9eZgtqCKxAsq0NXC1rUTcOs3UefffeJ5lrT1xhppDQ4CV
r7iLQCBBAmcrKWwjvvqEXSu7BoPBKPiM9TAyCFEKQQ/1QSgbI5oNjpz/mTCKZRkF
7xX5iPmoPDTKRbjubEtRlp/HB+bd0fuk40dWuv35qC3IR5fbqizl67B2LPmquDix
9EPHwiQ=
=9RjP
-----END PGP SIGNATURE-----
Merge tag 'sound-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All changes are rather boring
device-specific fixes and quirks:
- A few fixes for missing NULL checks
- ASoC NAU8821 fixes for jack and irq handling
- Various fixes for ASoC TAS2781, IDT821034, sc8280xp, max9809x,
wcd938x, and SoundWire
- Usual HD-audio and USB-audio quirks"
* tag 'sound-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits)
ALSA: hda/realtek: Fix mute led for HP Omen 17-cb0xxx
ALSA: usb-audio: fix vendor quirk for Logitech H390
ALSA: usb-audio: add volume quirks for MS LifeChat LX-3000
ASoC: amd/sdw_utils: avoid NULL deref when devm_kasprintf() fails
ASoC: max98090/91: fixed max98091 ALSA widget powering up/down
ASoC: dt-bindings: Add compatible string fsl,imx-audio-tlv320
ASoC: codecs: wcd938x-sdw: remove redundant runtime pm calls
ASoC: sdw_utils: add rt1321 part id to codec_info_list
ALSA: usb-audio: Fix NULL pointer deference in try_to_register_card
ALSA: firewire: amdtp-stream: fix enum kernel-doc warnings
ALSA: usb-audio: add mixer_playback_min_mute quirk for Logitech H390
ASoC: nau8821: Avoid unnecessary blocking in IRQ handler
ASoC: nau8821: Add DMI quirk to bypass jack debounce circuit
ASoC: nau8821: Consistently clear interrupts before unmasking
ASoC: nau8821: Generalize helper to clear IRQ status
ASoC: nau8821: Cancel jdet_work before handling jack ejection
ASoC: codecs: Fix gain setting ranges for Renesas IDT821034 codec
ASoC: tas2781: Update ti,tas2781.yaml for adding tas58xx
ASoC: tas2781: Support more newly-released amplifiers tas58xx in the driver
ASoC: qcom: sc8280xp: Add support for QCS615
...
|
||
|
Mark Brown
|
62ef9b2a01
|
ASoC: Add QCS615 sound card support
Merge series from Le Qi <le.qi@oss.qualcomm.com>: This patch series adds support for the QCS615 sound card: - Updates device tree bindings for SM8250 to include QCS615. - Adds QCS615 support in the SC8280XP ASoC driver. |
||
|
Frank Li
|
fcd298fdc2
|
ASoC: dt-bindings: Add compatible string fsl,imx-audio-tlv320
Add compatible string fsl,imx-audio-tlv320 to fix below CHECK_DTBS warning: arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dtb: /sound: failed to match any schema with compatible: ['fsl,imx-audio-tlv320'] Signed-off-by: Frank Li <Frank.Li@nxp.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20251010160321.2130093-1-Frank.Li@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Rob Herring (Arm)
|
8675370941 |
dt-bindings: i2c: Convert apm,xgene-slimpro-i2c to DT schema
Convert APM X-Gene slimpro-i2c binding to DT schema format. It's a straight-forward conversion. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> |
||
|
Martin K. Petersen
|
4827790660 |
Merge branch '6.18/scsi-queue' into 6.18/scsi-fixes
Pull in outstanding SCSI fixes for 6.18. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Mark Brown
|
4f38da1f02 |
Linux 6.18-rc1
-----BEGIN PGP SIGNATURE----- iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmjsErweHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGEs0H/ix2P7LcpWZ3Pr53 Eok8Q1X/vxwQorNGKWLcjbX57dNj/Uw68Tlfovst+g2k13rqId1EVmPz6/01k+I/ 4iWRBE8a5cti+g20Fje5hZcZEWfkRtnbBIfYeHfCFZsYZ1xF0v3TgZBWo53Bqn3V zuQEFVBAhCOfDFoVqkihV4Ji1oujxWoygBE2CoOnt640v5HvTwkxd/n+2c06KOkv jhmzMSv5naqlnQ0HPh9UkcMSk8OgQhB2M4IIKT22yZaurrUvQHlPnd87cQIknLSO nqUg7xpYknDz6d8miY1UW7unaYjMMh7t6vHVOUwOmeA9Lgbxt8LLBN1a/tjnYgNN zXB1W74= =IY43 -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmjs8WYACgkQJNaLcl1U h9AtvQf/Q8QMvdaLthHko1FeIMXn3Soq33MgR/bpdRMxVUHM78qgYay43xziCjLL KIu+byfZlC36Q26pqQZYeg78ALGDsd6A67p2WywaIWPqZCnefDOfwDILo6ulhNJ8 kPl9KiUOw44U1yEXW+godAXfze97PvMheD4tez4FyZosjbf6avYyRVhegxxyWOwM 29UHxZ/TKF+LYbJAQj6uzWbdj3+Hu0uTuWhsH27T/PMT2vs21lMZ1METGBTz5JVN QzQzy5W2INYq+EbYZisf9eWhB+WrlIiIXm5VCGGxQUX/DXa3JGuJ6u8cfuMbLUgU 0459xG9oSGAe0fY977D/GDa9ax8MfA== =aBD2 -----END PGP SIGNATURE----- spi: Merge up v6.18-rc1 Ensure my CI has a sensible baseline. |
||
|
Baojun Xu
|
7e6cfa3e94
|
ASoC: tas2781: Update ti,tas2781.yaml for adding tas58xx
Update ti,tas2781.yaml for adding TAS5802/TAS5815/TAS5828. Signed-off-by: Baojun Xu <baojun.xu@ti.com> Link: https://patch.msgid.link/20251002072925.26242-2-baojun.xu@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Le Qi
|
6079165e6e
|
ASoC: dt-bindings: qcom,sm8250: Add QCS615 sound card
Add bindings for QCS615 sound card, which looks fully compatible with existing SM8250. Signed-off-by: Le Qi <le.qi@oss.qualcomm.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20251009090619.1097388-2-le.qi@oss.qualcomm.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Krishna Kurapati
|
51cb04abd3 |
dt-bindings: usb: qcom,snps-dwc3: Fix bindings for X1E80100
Add the missing multiport controller binding to target list.
Fix minItems for interrupt-names to avoid the following error on High
Speed controller:
usb@a200000: interrupt-names: ['dwc_usb3', 'pwr_event', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short
Fixes:
|
||
|
Neil Armstrong
|
bd8c3ce6d7 |
dt-bindings: usb: switch: split out ports definition
The ports definition currently defined in the usb-switch.yaml
fits standards devices which are either recipient of altmode
muxing and orientation switching events or an element of the
USB Super Speed data lanes.
This doesn't necessarely fit combo PHYs like the Qualcomm
USB3/DP Combo which has a different ports representation.
Move the ports definition to a separate usb-switch-ports.yaml
and reference it next to the usb-switch.yaml, except for
the Qualcomm USB3/DP Combo PHY bindings.
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/all/175462129176.394940.16810637795278334342.robh@kernel.org/
Fixes:
|
||
|
Xu Yang
|
268eb6fb90 |
dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mp
Only i.MX8MP need dma-range property to let USB controller work properly.
Remove dma-range from required list and add limitation for imx8mp.
Fixes:
|
||
|
Linus Torvalds
|
98906f9d85 |
RTC for 6.18
Subsystem: - Fix race when setting alarm - Ensure alarm irq is enabled when UIE is enabled - remove unneeded 'fast_io' parameter in regmap_config New driver: - SpacemiT P1 RTC Drivers: - efi: Remove wakeup functionality - optee: add alarms support - s3c: Drop support for S3C2410 - zynqmp: Restore alarm functionality after kexec transition -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmjqgaEACgkQY6TcMGxw OjK/uBAAskG29umNu0QmQYOdtihk45mOFe6DZgCgDoTKa+OcV26/Y0Nak2n13rzL j7yLYfiGf0IjghcrdfXwONHwYR2y0LoQBZK5i9klZYNkuabe9bqEq7k0t7RPc33D mgycZVHYgQh9Jx1DM4XAUKCyE08TJ4AjdybpXIhyJbovAgNcHbdZ+Zv/A+Kq3P+d AjaGjcuwQI/3tiVDgry4BfPrvK/UzPB1SblDnmFW6w7AyMjYgarXYCW9qDlm2NAM l0mr48XI1V0g3KNZ/1AhH/R79tyq/57lmu4ynS6FTIL6ppkyWu0yM86Xzr6xpVK7 Xtb+BBGmB4lSKqmBVT3pM6iX14XKM3gYc4Dn9ZfvLwW1bVrMKfx0kIzzHn1pIgX0 dSrwbhuJVrUCwqczUZ5Ul+D9i8tcLBL20RcbobdOEqxkkoS18gpIpqX5bGxCLSKM DEwewK2tP/VRWxFp57yUgzHdmEUg66l8Z6IEoZsM+2d3AXWblssijmDnQ1fNxXx8 94gfcVqn5HhmmGQzf8ZUWZQvxqZN9merZQuTFj0mxZnzXBCnqjQ1pLxvgxlyqhLT IjSsIDhQTsOFTSxAR+1rK4Yo4o60U59/HrgcTdgP4mSaf0AWHFjhlVf+WfuJhVMY M5qtwTO1IuTpxlyzQgPaClF/CFOfC6OaKqvf6LRZPd0l4hMlOU8= =dH7Y -----END PGP SIGNATURE----- Merge tag 'rtc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "This cycle, we have a new RTC driver, for the SpacemiT P1. The optee driver gets alarm support. We also get a fix for a race condition that was fairly rare unless while stress testing the alarms. Subsystem: - Fix race when setting alarm - Ensure alarm irq is enabled when UIE is enabled - remove unneeded 'fast_io' parameter in regmap_config New driver: - SpacemiT P1 RTC Drivers: - efi: Remove wakeup functionality - optee: add alarms support - s3c: Drop support for S3C2410 - zynqmp: Restore alarm functionality after kexec transition" * tag 'rtc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (29 commits) rtc: interface: Ensure alarm irq is enabled when UIE is enabled rtc: tps6586x: Fix initial enable_irq/disable_irq balance rtc: cpcap: Fix initial enable_irq/disable_irq balance rtc: isl12022: Fix initial enable_irq/disable_irq balance rtc: interface: Fix long-standing race when setting alarm rtc: pcf2127: fix watchdog interrupt mask on pcf2131 rtc: zynqmp: Restore alarm functionality after kexec transition rtc: amlogic-a4: Optimize global variables rtc: sd2405al: Add I2C address. rtc: Kconfig: move symbols to proper section rtc: optee: make optee_rtc_pm_ops static rtc: optee: Fix error code in optee_rtc_read_alarm() rtc: optee: fix error code in probe() dt-bindings: rtc: Convert apm,xgene-rtc to DT schema rtc: spacemit: support the SpacemiT P1 RTC rtc: optee: add alarm related rtc ops to optee rtc driver rtc: optee: remove unnecessary memory operations rtc: optee: fix memory leak on driver removal rtc: x1205: Fix Xicor X1205 vendor prefix dt-bindings: rtc: Fix Xicor X1205 vendor prefix ... |
||
|
Linus Torvalds
|
f76b1683d1 |
Devicetree fixes for v6.18:
- Allow child nodes on renesas-bsc bus binding - Drop node name pattern on allwinner,sun50i-a64-de2 bus binding - Switch DT patchwork to kernel.org from ozlabs.org - Fix some typos in docs and bindings - Fix reference count in PCI node unittest -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmjpWnAACgkQ+vtdtY28 YcMtshAAiSam4S3L2TILOeglTJvOFs18+klvvIru3Xlndgm3IBOIy/ittiGwK96e NuwZ4tPMdbXjBaCo8ozPC3ZFGYVAmUgVm9uTZYuSsbQL3Vpcr196CTzTc+d8GsdY t72Er45D8kR6p0Fg28N850ycMHIMlNpt3fk1ZMczCXr2XRYj70TNNv9mRK3paXIi r0IVieXm/OuzU1muDyLzihsfAEt+8hNQvyfBlYtWlPJY0z6micnPlnkEAsBtFaQr YHbvjZCyeRp7fD+FioPy+1xMHf46shCyQM/PbOL9nA6NLur2/FQoXCsS+/HyqrrV C/f6/ZWCywuODXg41rnzCm4P8BiqCuGGYUuY/clmAQno8yXLF0DG4yL7cslsR3bm vDOtlmJDdQ/+5zvsJDkipodOHw8SHK0x6941MGEufVz3j/2uSJef3veWMpgbVF6+ BSbtEKQ3eBkxcpLkTHPTdqVguIoXSqC5+0HxekfcujgvIfst90D5U/VUDHfyXVRY /snbqKN5P//GzV/JmIVYznqqapfNFOPTaf0f1pol4nk/v77VoxbcS4CiLW0R1nJ5 vpHQcD/Jbu7AO4oWhsJy0yNDHUnspyjxfS221gNV9DyzkGxgQkFl6okoI05RJNUZ NpgblCMk1JaWcHjxgddPxUoc5JNyveIVuY1UBQFeuAK2Cebze14= =7vRd -----END PGP SIGNATURE----- Merge tag 'devicetree-fixes-for-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Allow child nodes on renesas-bsc bus binding - Drop node name pattern on allwinner,sun50i-a64-de2 bus binding - Switch DT patchwork to kernel.org from ozlabs.org - Fix some typos in docs and bindings - Fix reference count in PCI node unittest * tag 'devicetree-fixes-for-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: bus: renesas-bsc: allow additional properties dt-bindings: bus: allwinner,sun50i-a64-de2: don't check node names MAINTAINERS: Move DT patchwork to kernel.org of: unittest: Fix device reference count leak in of_unittest_pci_node_verify of: doc: Fix typo in doc comments. dt-bindings: mmc: Correct typo "upto" to "up to" |
||
|
Wolfram Sang
|
ce740955b2 |
dt-bindings: bus: renesas-bsc: allow additional properties
Allow additional properties to enable devices attached to the bus.
Fixes warnings like these:
arch/arm/boot/dts/renesas/sh73a0-kzm9g.dtb: bus@fec10000 (renesas,bsc-sh73a0): Unevaluated properties are not allowed ('ethernet@10000000' was unexpected)
arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dtb: bus@fec10000 (renesas,bsc-r8a73a4): Unevaluated properties are not allowed ('ethernet@8000000', 'flash@0' were unexpected)
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
||
|
Wolfram Sang
|
f7045387a6 |
dt-bindings: bus: allwinner,sun50i-a64-de2: don't check node names
Node names are already and properly checked by the core schema. No need to do it again. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> [robh: Also drop [A-F] in unit address] Signed-off-by: Rob Herring (Arm) <robh@kernel.org> |
||
|
Linus Torvalds
|
aac3190332 |
i2c-for-6.18-rc1-part2
- Second part of rtl9300 updates since dependencies are in now
- general cleanups, implemented block read/write support, added RTL9310 support
- DT schema conversion of hix5hd2 binding
- namespace cleanup for i2c-algo-pca
- minor simplification for mt65xx
-----BEGIN PGP SIGNATURE-----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=4NUB
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
- Second part of rtl9300 updates since dependencies are in now:
- general cleanups
- implement block read/write support
- add RTL9310 support
- DT schema conversion of hix5hd2 binding
- namespace cleanup for i2c-algo-pca
- minor simplification for mt65xx
* tag 'i2c-for-6.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: hisilicon,hix5hd2: convert to DT schema
i2c: mt65xx: convert set_speed function to void
i2c: rename wait_for_completion callback to wait_for_completion_cb
i2c: rtl9300: add support for RTL9310 I2C controller
dt-bindings: i2c: realtek,rtl9301-i2c: extend for RTL9310 support
i2c: rtl9300: use scoped guard instead of explicit lock/unlock
i2c: rtl9300: separate xfer configuration and execution
i2c: rtl9300: do not set read mode on every transfer
i2c: rtl9300: move setting SCL frequency to config_io
i2c: rtl9300: rename internal sda_pin to sda_num
dt-bindings: i2c: realtek,rtl9301-i2c: fix wording and typos
i2c: rtl9300: use regmap fields and API for registers
i2c: rtl9300: Implement I2C block read and write
|
||
|
Kael D'Alcamo
|
eb4faf6343 |
dt-bindings: i2c: hisilicon,hix5hd2: convert to DT schema
Convert the Devicetree binding documentation for hisilicon,hix5hd2-i2c from plain text to DT binding schema. Signed-off-by: Kael D'Alcamo <dev@kael-k.io> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> |
||
|
Linus Torvalds
|
cd5a0afbdf |
qcom: add Glymur CPUCP mailbox binding
zynqmp-ipi: misc cleanup
mtk: add new GPUEB mailbox driver
cmdq - remove pm_runtime calls from send_data
gce - make clock-names optional
misc: change mailbox-altera maintainer
remove redundant 'fast_io' in regmap_config
mhuv3 - Remove no_free_ptr
-----BEGIN PGP SIGNATURE-----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=/pj4
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- Qualcomm: add Glymur CPUCP mailbox binding
- Xilinx Zynq: misc cleanup
- MediaTek:
- add new GPUEB mailbox driver
- cmdq: remove pm_runtime calls from send_data
- gce: make clock-names optional
- misc:
- change mailbox-altera maintainer
- remove redundant 'fast_io' in regmap_config
- mhuv3: Remove no_free_ptr
* tag 'mailbox-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox: mtk-cmdq: Remove pm_runtime APIs from cmdq_mbox_send_data()
mailbox: add MediaTek GPUEB IPI mailbox
dt-bindings: mailbox: Add MT8196 GPUEB Mailbox
mailbox: zynqmp-ipi: Fix SGI cleanup on unbind
mailbox: zynqmp-ipi: Fix out-of-bounds access in mailbox cleanup loop
mailbox: zynqmp-ipi: Remove dev.parent check in zynqmp_ipi_free_mboxes
mailbox: zynqmp-ipi: Remove redundant mbox_controller_unregister() call
mailbox: remove unneeded 'fast_io' parameter in regmap_config
dt-bindings: mailbox: mediatek,gce-mailbox: Make clock-names optional
dt-bindings: mailbox: qcom: Document Glymur CPUCP mailbox controller binding
MAINTAINERS: Change mailbox-altera maintainer
mailbox: arm_mhuv3: Remove no_free_ptr() to maintain the original form of the pointer
|
||
|
Linus Torvalds
|
99cedb6b8f |
Input updates for v6.18-rc0
- a number of conversions to yaml/json schema and fixes for
input-related device tree bindings
- a new driver for Awinic AW86927 haptic chip
- a new driver for Hynitron CST816x series controller
- a new driver for add Himax HX852x(ES) touchscreen controller
- a fix to uinput to not leak kernel memory via a gap in
uinput_ff_upload_compat structure
- a fix to prevent overflow in pressure calculation in tsc2007 driver
causing phantom touches
- a change to Atmel maxTouch driver to support generic touchscreen
configuration (flip, rotate, etc.)
- support for platform data was dropped in tca8418_keypad,
pxa27x-keypad, spear-keyboard and twl4030_keypad drivers, they all
now rely on generic device properties for configuration
- other assorted changes and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaOX1HQAKCRBAj56VGEWX
nC29AQCsDm6HBKXJZl6nAI8WHQiSvASFvyFlF6scVnfueX54mQEA6eE428+Cr1Sn
mDiwL38Es+PlZbdsi0J2q0vYzpr4yQU=
=JZIn
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- Conversions to yaml/json schema and fixes for input-related device
tree bindings
- New drivers:
- Awinic AW86927 haptic chip
- Hynitron CST816x series controller
- Himax HX852x(ES) touchscreen controller
- Fix uinput to not leak kernel memory via a gap in
uinput_ff_upload_compat structure
- Prevent overflow in pressure calculation in tsc2007 driver causing
phantom touches
- Make the Atmel maxTouch driver support generic touchscreen
configuration (flip, rotate, etc)
- Drop support for platform data in tca8418_keypad, pxa27x-keypad,
spear-keyboard and twl4030_keypad drivers, they all now rely on
generic device properties for configuration
- Other assorted changes and fixes
* tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits)
Input: atmel_mxt_ts - allow reset GPIO to sleep
Input: aw86927 - fix error code in probe()
Input: psxpad-spi - add a check for the return value of spi_setup()
Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info leak
Input: aw86927 - add driver for Awinic AW86927
dt-bindings: input: Add Awinic AW86927
dt-bindings: touchscreen: remove touchscreen.txt
dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add touchscreen child node
dt-bindings: touchscreen: convert eeti bindings to json schema
Input: pm8941-pwrkey - disable wakeup for resin by default
dt-bindings: input: pm8941-pwrkey: Document wakeup-source property
Input: add driver for Hynitron CST816x series
dt-bindings: input: touchscreen: add hynitron cst816x series
Input: imx6ul_tsc - set glitch threshold by DTS property
dt-bindings: touchscreen: fsl,imx6ul-tsc: support glitch thresold
dt-bindings: touchscreen: add debounce-delay-us property
Input: ps2-gpio - fix typo
Input: atmel_mxt_ts - add support for generic touchscreen configurations
dt-bindings: input: maxtouch: add common touchscreen properties
dt-bindings: touchscreen: convert zet6223 bindings to json schema
...
|
||
|
Linus Torvalds
|
522ba450b5 |
There's a bunch of patches here across drivers/clk/ to migrate drivers to use
struct clk_ops::determine_rate() instead of the round_rate() one so that we can remove the round_rate clk_op entirely. Brian has taken up that task which nobody else has wanted to do for close to a decade. Thanks Brian! This is all prerequisite work to get to the real task of improving the clk rate setting process. Once we have determine_rate() used everywhere, we'll be able to do things like chain the rate request structs in linked lists to order the rate setting operations or add more parameters without having to change every clk driver in existence. It's also nice to not have multiple ways to do something which just causes confusion for clk driver authors. Overall I'm glad this is getting done. Beyond this change we also have a tweak to the clk_lookup() function in the core framework to use hashing on the clk name instead of a clk tree walk with string comparisons. We _still_ rely on the clk name to be unique, because historically we've used globally unique strings to describe the clk tree topology. This tree walk becomes increasingly slow as more clks are added to the system. Searching from the roots for a duplicate is simple but pretty dumb and it wastes boot time so we're using a hash table as an improvement. Ideally we wouldn't rely on the strings to be unique at all, relegating them to simply debug information, but that is future work that will likely require some sort of Kconfig knob indicating strings aren't used for topology description. Outside of the core framework changes we have the usual new SoC support and fixes to clk drivers for things that were discovered once the clks were used by consumer drivers. Nothing in particular is jumping out at me in the "misc" pile, except maybe the Amlogic driver that has gone through a refactoring. That series got a fix from testing in -next though so it seems likely that things have been getting good test coverage for a couple weeks already. -----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmjkoQAUHHN3Ym95ZEBj aHJvbWl1bS5vcmcACgkQrQKIl8bklSWfWBAA3cjpOX/qOBDPmYPvV+WgiTPcmnw+ PaMiGNqIWctnJiuYYUNVCfBIvTk9i1vYSgEosHAOqjXQV+7Ee31420xn5RYr6Zen cfeD58SJwZ1JVidvxwWclC5pnfTVXBC3wlHILCFHhckaGOT2k3d0ryN2io2TYuRx t9JsoW73YW+bmOWoFDHPMp4ow5Q87aa8k3/srhIP67tw2mzJp8Wp+EG0t0PVFF7Z aboz+QPwyT2YOLFKJxm6nTLb9FRVq3QLSO3Ek0+0TYXfRqkfegvGR+M82P4Jq2Y3 osmTsumWeI170iAETmx2Py+uUV8MmnvPFQ6mxrGoXYyOx9SclN+SC86cOsi+RsgD 830CHupZ/TrN3+DGyX6WVx1j7XKCplKhFXrXiFbkPnj4nJwi5UgiJrjAjPy78+iX LyvKfeT9ooAAVBVRMyZIWGF3kuQf5qHFMps5fwJk/j3R9yMiI10SVhruhYij1qAi EEisj955xqdyZV2gq85E7zHbjySA0nvNABn3NVUQOKPYQqtpglqXKGJuXZ1//9pa fZM2a3fH7w4fwH1x06FKut9zf1AZUgyasJPtgyCT9dpN+pcoNmJfoH3T42MCItbm XKEYgnv/kQT+M+GokBUfg8bJY5uPnPLa/f6aAAIAKGZV0HXAqz2q73SDlW7KUQmr vhgA4MRH4Vqviic= =fjY4 -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "There's a bunch of patches here across drivers/clk/ to migrate drivers to use struct clk_ops::determine_rate() instead of the round_rate() one so that we can remove the round_rate clk_op entirely. Brian has taken up that task which nobody else has wanted to do for close to a decade. Thanks Brian! This is all prerequisite work to get to the real task of improving the clk rate setting process. Once we have determine_rate() used everywhere, we'll be able to do things like chain the rate request structs in linked lists to order the rate setting operations or add more parameters without having to change every clk driver in existence. It's also nice to not have multiple ways to do something which just causes confusion for clk driver authors. Overall I'm glad this is getting done. Beyond this change we also have a tweak to the clk_lookup() function in the core framework to use hashing on the clk name instead of a clk tree walk with string comparisons. We _still_ rely on the clk name to be unique, because historically we've used globally unique strings to describe the clk tree topology. This tree walk becomes increasingly slow as more clks are added to the system. Searching from the roots for a duplicate is simple but pretty dumb and it wastes boot time so we're using a hash table as an improvement. Ideally we wouldn't rely on the strings to be unique at all, relegating them to simply debug information, but that is future work that will likely require some sort of Kconfig knob indicating strings aren't used for topology description. Outside of the core framework changes we have the usual new SoC support and fixes to clk drivers for things that were discovered once the clks were used by consumer drivers. Nothing in particular is jumping out at me in the "misc" pile, except maybe the Amlogic driver that has gone through a refactoring. That series got a fix from testing in -next though so it seems likely that things have been getting good test coverage for a couple weeks already" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (299 commits) clk: microchip: core: remove duplicate roclk_determine_rate() reset: aspeed: register AST2700 reset auxiliary bus device dt-bindings: clock: ast2700: modify soc0/1 clock define clk: tegra: do not overallocate memory for bpmp clocks clk: ep93xx: Use int type to store negative error codes clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver clk: loongson2: Add clock definitions for Loongson-2K0300 SoC clk: loongson2: Avoid hardcoding firmware name of the reference clock clk: loongson2: Allow zero divisors for dividers clk: loongson2: Support scale clocks with an alternative mode clk: loongson2: Allow specifying clock flags for gate clock dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible clk: clocking-wizard: Fix output clock register offset for Versal platforms clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver() clk: mmp: pxa1908: Instantiate power driver through auxiliary bus clk: s2mps11: add support for S2MPG10 PMIC clock dt-bindings: clock: samsung,s2mps11: add s2mpg10 dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings clk: stm32: introduce clocks for STM32MP21 platform dt-bindings: stm32: add STM32MP21 clocks and reset bindings ... |
||
|
Jingyi Wang
|
7c3321f3d2 |
scsi: ufs: phy: dt-bindings: Add QMP UFS PHY compatible for Kaanapali
Document the QMP UFS PHY compatible for Qualcomm Kaanapali to support physical layer functionality for UFS found on the SoC. Use fallback to indicate the compatibility of the QMP UFS PHY on the Kaanapali with that on the SM8750. Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com> Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Nitin Rawat
|
6dfc353af5 |
scsi: ufs: qcom: dt-bindings: Document the Kaanapali UFS controller
Document the UFS Controller on the Kaanapali Platform. Signed-off-by: Nitin Rawat <nitin.rawat@oss.qualcomm.com> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com> Message-Id: <20250924-knp-ufs-v1-1-42e0955a1f7c@oss.qualcomm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Nicolas Frattaroli
|
d3e35a151a |
dt-bindings: mailbox: Add MT8196 GPUEB Mailbox
The MediaTek MT8196 SoC includes an embedded MCU referred to as "GPUEB", acting as glue logic to control power and frequency of the Mali GPU. This MCU runs special-purpose firmware for this use, and the main application processor communicates with it through a mailbox. Add a binding that describes this mailbox. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> |
||
|
AngeloGioacchino Del Regno
|
426f4e9414 |
dt-bindings: mailbox: mediatek,gce-mailbox: Make clock-names optional
The GCE Mailbox needs only one clock and the clock-names can be used only by the driver (which, for instance, does not use it), and this is true for all of the currently supported MediaTek SoCs. Stop requiring to specify clock-names on all non-MT8195 GCEs. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Acked-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> |
||
|
Sibi Sankar
|
526ce9eb45 |
dt-bindings: mailbox: qcom: Document Glymur CPUCP mailbox controller binding
Document CPU Control Processor (CPUCP) mailbox controller for Qualcomm Glymur SoCs. It is software compatible with X1E80100 CPUCP mailbox controller hence fallback to it. Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> |
||
|
Linus Torvalds
|
169c9d06a2 |
linux-watchdog 6.18-rc1 tag
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.14 (GNU/Linux) iEYEABECAAYFAmjjqsIACgkQ+iyteGJfRsrJWwCfezTQZPxxtibG4hlqA/zCu7Ld 814Anj+feJH4ZYFJT0n0SztEJU/LNfkn =T3LI -----END PGP SIGNATURE----- Merge tag 'linux-watchdog-6.18-rc1' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - renesas,wdt: Add support for RZ/T2H and RZ/N2H - Add SMARC-sAM67 support - Several small fixes and improvements * tag 'linux-watchdog-6.18-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog/hpwdt New maintianer dt-bindings: watchdog: add SMARC-sAM67 support watchdog: mpc8xxx_wdt: Reload the watchdog timer when enabling the watchdog watchdog: visconti: don't print superfluous errors watchdog: rzv2h_wdt: don't print superfluous errors watchdog: rzg2l_wdt: don't print superfluous errors watchdog: s3c2410_wdt: exynosautov9: Enable supported features watchdog: s3c2410_wdt: exynosautov920: Enable QUIRK_HAS_32BIT_CNT watchdog: s3c2410_wdt: Increase max timeout value of watchdog watchdog: s3c2410_wdt: Fix max_timeout being calculated larger watchdog: s3c2410_wdt: Replace hardcoded values with macro definitions watchdog: rzv2h: Improve error strings and add newlines watchdog: rzv2h: Add support for RZ/T2H watchdog: rzv2h: Add support for configurable count clock source watchdog: rzv2h: Make "oscclk" and reset controller optional watchdog: rzv2h: Obtain clock-divider and timeout values from OF match data dt-bindings: watchdog: renesas,wdt: Add support for RZ/T2H and RZ/N2H watchdog: intel_oc_wdt: Do not try to write into const memory |
||
|
Stephen Boyd
|
8397c58ea7
|
Merge branches 'clk-marvell', 'clk-xilinx', 'clk-mediatek' and 'clk-loongson' into clk-next
- Add Mediatek MT8196 clk drivers * clk-marvell: clk: mmp: pxa1908: Instantiate power driver through auxiliary bus * clk-xilinx: clk: clocking-wizard: Fix output clock register offset for Versal platforms clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver() * clk-mediatek: (31 commits) clk: mediatek: Add MT8196 vencsys clock support clk: mediatek: Add MT8196 vdecsys clock support clk: mediatek: Add MT8196 ovl1 clock support clk: mediatek: Add MT8196 ovl0 clock support clk: mediatek: Add MT8196 disp-ao clock support clk: mediatek: Add MT8196 disp1 clock support clk: mediatek: Add MT8196 disp0 clock support clk: mediatek: Add MT8196 mfg clock support clk: mediatek: Add MT8196 mdpsys clock support clk: mediatek: Add MT8196 mcu clock support clk: mediatek: Add MT8196 I2C clock support clk: mediatek: Add MT8196 pextpsys clock support clk: mediatek: Add MT8196 ufssys clock support clk: mediatek: Add MT8196 peripheral clock support clk: mediatek: Add MT8196 vlpckgen clock support clk: mediatek: Add MT8196 topckgen2 clock support clk: mediatek: Add MT8196 topckgen clock support clk: mediatek: Add MT8196 apmixedsys clock support dt-bindings: clock: mediatek: Describe MT8196 clock controllers clk: mediatek: clk-mtk: Add MUX_DIV_GATE macro ... * clk-loongson: clk: loongson2: Add clock definitions for Loongson-2K0300 SoC clk: loongson2: Avoid hardcoding firmware name of the reference clock clk: loongson2: Allow zero divisors for dividers clk: loongson2: Support scale clocks with an alternative mode clk: loongson2: Allow specifying clock flags for gate clock dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible |
||
|
Stephen Boyd
|
b91217d912
|
Merge branches 'clk-microchip', 'clk-lookup' and 'clk-st' into clk-next
- Speed up clk_core_lookup() by using a hashtable * clk-microchip: ARM: at91: remove default values for PMC_PLL_ACR clk: at91: add ACR in all PLL settings clk: at91: sam9x7: Add peripheral clock id for pmecc clk: at91: clk-master: Add check for divide by 3 clk: at91: clk-sam9x60-pll: force write to PLL_UPDT register ARM: at91: pm: save and restore ACR during PLL disable/enable * clk-lookup: clk: Use hashtable for global clk lookups clk: Sort include statements * clk-st: dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings clk: stm32: introduce clocks for STM32MP21 platform dt-bindings: stm32: add STM32MP21 clocks and reset bindings |
||
|
Stephen Boyd
|
f0fd248204
|
Merge branches 'clk-scmi', 'clk-qcom' and 'clk-broadcom' into clk-next
* clk-scmi: clk: scmi: Add duty cycle ops only when duty cycle is supported * clk-qcom: (27 commits) clk: qcom: gcc-sc8280xp: drop obsolete PCIe GDSC comment clk: qcom: tcsrcc-x1e80100: Set the bi_tcxo as parent to eDP refclk clk: qcom: dispcc-glymur: Constify 'struct qcom_cc_desc' clk: qcom: gcc: Add support for Global Clock controller found on MSM8937 dt-bindings: clock: qcom: Add MSM8937 Global Clock Controller clk: qcom: Select the intended config in QCS_DISPCC_615 clk: qcom: common: Fix NULL vs IS_ERR() check in qcom_cc_icc_register() clk: qcom: alpha-pll: convert from round_rate() to determine_rate() clk: qcom: milos: Constify 'struct qcom_cc_desc' clk: qcom: gcc: Add support for Global Clock Controller dt-bindings: clock: qcom: document the Glymur Global Clock Controller clk: qcom: clk-alpha-pll: Add support for Taycan EKO_T PLL clk: qcom: rpmh: Add support for Glymur rpmh clocks clk: qcom: Add TCSR clock driver for Glymur SoC dt-bindings: clock: qcom: Document the Glymur SoC TCSR Clock Controller dt-bindings: clock: qcom-rpmhcc: Add support for Glymur SoCs clk: qcom: dispcc-glymur: Add support for Display Clock Controller dt-bindings: clock: Add DISPCC and reset controller for GLYMUR SoC clk: qcom: gcc-sdm660: Add missing LPASS/CDSP vote clocks dt-bindings: clock: gcc-sdm660: Add LPASS/CDSP vote clocks/GDSCs ... * clk-broadcom: clk: bcm: rpi: Maximize V3D clock clk: bcm: rpi: Turn firmware clock on/off when preparing/unpreparing clk: bcm: rpi: Add missing logs if firmware fails |
||
|
Stephen Boyd
|
c1e102f349
|
Merge branches 'clk-imx', 'clk-allwinner' and 'clk-ti' into clk-next
* clk-imx: clk: imx95-blk-ctl: Save/restore registers when RPM routines are called clk: imx95-blk-ctl: Save platform data in imx95_blk_ctl structure * clk-allwinner: clk: sunxi-ng: add support for the A523/T527 MCU CCU clk: sunxi-ng: div: support power-of-two dividers clk: sunxi-ng: sun55i-a523-ccu: Add missing NPU module clock dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller dt-bindings: clock: sun55i-a523-ccu: Add missing NPU module clock clk: sunxi-ng: sun6i-rtc: Add A523 specifics * clk-ti: clk: keystone: sci-clk: use devm_kmemdup_array() clk: ti: am33xx: keep WKUP_DEBUGSS_CLKCTRL enabled |
||
|
Stephen Boyd
|
3aae991cc2
|
Merge branches 'clk-samsung', 'clk-tegra' and 'clk-amlogic' into clk-next
* clk-samsung: clk: s2mps11: add support for S2MPG10 PMIC clock dt-bindings: clock: samsung,s2mps11: add s2mpg10 clk: samsung: exynos990: Add PERIC0 and PERIC1 clock support dt-bindings: clock: exynos990: Add PERIC0 and PERIC1 clock units clk: samsung: exynos990: Add missing USB clock registers to HSI0 clk: samsung: exynos990: Add LHS_ACEL gate clock for HSI0 and update CLK_NR_TOP dt-bindings: clock: exynos990: Add LHS_ACEL clock ID for HSI0 block clk: samsung: artpec-8: Add initial clock support for ARTPEC-8 SoC clk: samsung: Add clock PLL support for ARTPEC-8 SoC dt-bindings: clock: Add ARTPEC-8 clock controller clk: samsung: exynos990: Add DPU_BUS and CMUREF mux/div and update CLKS_NR_TOP dt-bindings: clock: exynos990: Extend clocks IDs clk: samsung: exynos990: Replace bogus divs with fixed-factor clocks clk: samsung: exynos990: Fix CMU_TOP mux/div bit widths clk: samsung: exynos990: Use PLL_CON0 for PLL parent muxes clk: samsung: pll: convert from round_rate() to determine_rate() clk: samsung: cpu: convert from round_rate() to determine_rate() clk: samsung: fsd: Add clk id for PCLK and PLL in CAM_CSI block dt-bindings: clock: Add CAM_CSI clock macro for FSD * clk-tegra: clk: tegra: dfll: Add CVB tables for Tegra114 clk: tegra: Add DFLL DVCO reset control for Tegra114 dt-bindings: arm: tegra: Add ASUS TF101G and SL101 dt-bindings: reset: Add Tegra114 CAR header dt-bindings: arm: tegra: Add Xiaomi Mi Pad (A0101) dt-bindings: clock: tegra30: Add IDs for CSI pad clocks dt-bindings: display: tegra: Move avdd-dsi-csi-supply from VI to CSI dt-bindings: i2c: nvidia,tegra20-i2c: Document Tegra264 I2C * clk-amlogic: clk: amlogic: fix recent code refactoring clk: amlogic: c3-peripherals: use helper for basic composite clocks clk: amlogic: align s4 and c3 pwm clock descriptions clk: amlogic: add composite clock helpers clk: amlogic: use the common pclk definition clk: amlogic: introduce a common pclk definition clk: amlogic: pclk explicitly use CLK_IGNORE_UNUSED clk: amlogic: drop CLK_SET_RATE_PARENT from peripheral clocks clk: amlogic: move PCLK definition to clkc-utils clk: amlogic: aoclk: use clkc-utils syscon probe clk: amlogic: use probe helper in mmio based controllers clk: amlogic: add probe helper for mmio based controllers clk: amlogic: drop meson-clkcee clk: amlogic: naming consistency alignment |
||
|
Stephen Boyd
|
ec7336475d
|
Merge branches 'clk-bindings', 'clk-cleanup', 'clk-renesas', 'clk-thead' and 'clk-spacemit' into clk-next
* clk-bindings: dt-bindings: clock: mediatek: Add power-domains property dt-bindings: clock: silabs,si5341: Add missing properties dt-bindings: clock: adi,axi-clkgen: add clock-output-names property dt-bindings: clock: Remove unused fujitsu,mb86s70-crg11 binding dt-bindings: clock: Convert silabs,si570 to DT schema dt-bindings: clock: Convert silabs,si5341 to DT schema dt-bindings: clock: Convert silabs,si514/544 to DT schema * clk-cleanup: clk: tegra: do not overallocate memory for bpmp clocks clk: ep93xx: Use int type to store negative error codes dt-bindings: clock: st: flexgen: remove deprecated compatibles clk: st: flexgen: remove unused compatible clk: clk-axi-clkgen: remove unneeded semicolon clk: tegra: Remove redundant semicolons clk: npcm: select CONFIG_AUXILIARY_BUS clk: remove unneeded 'fast_io' parameter in regmap_config * clk-renesas: (27 commits) clk: renesas: r9a09g05[67]: Reduce differences clk: renesas: r9a09g047: Add USB3.0 clocks/resets clk: renesas: cpg-mssr: Fix memory leak in cpg_mssr_reserved_init() clk: renesas: r9a09g056: Add clock and reset entries for I3C clk: renesas: r9a09g057: Add clock and reset entries for I3C dt-bindings: clock: renesas,r9a09g047-cpg: Add USB3.0 core clocks clk: renesas: r9a09g077: Add Ethernet Subsystem core and module clocks clk: renesas: rzv2h: Simplify polling condition in __rzv2h_cpg_assert() clk: renesas: rzv2h: Re-assert reset on deassert timeout clk: renesas: rzg2l: Re-assert reset on deassert timeout clk: renesas: rzg2l: Simplify rzg2l_cpg_assert() and rzg2l_cpg_deassert() dt-bindings: clock: renesas,r9a09g077/87: Add Ethernet clock IDs clk: renesas: r9a09g047: Add GPT clocks and resets clk: renesas: r9a09g077: Add module clocks for SCI1-SCI5 clk: renesas: rzv2h: remove round_rate() in favor of determine_rate() clk: renesas: rzg2l: convert from round_rate() to determine_rate() clk: renesas: r9a07g04[34]: Use tabs instead of spaces clk: renesas: r9a07g043: Add MSTOP for RZ/G2UL clk: renesas: r9a07g044: Add MSTOP for RZ/G2L clk: renesas: r9a08g045: Add MSTOP for GPIO ... * clk-thead: clk: thead: th1520-ap: set all AXI clocks to CLK_IS_CRITICAL clk: thead: support changing DPU pixel clock rate clk: thead: add support for enabling/disabling PLLs clk: thead: Correct parent for DPU pixel clocks clk: thead: th1520-ap: fix parent of padctrl0 clock clk: thead: th1520-ap: describe gate clocks with clk_gate * clk-spacemit: clk: spacemit: fix i2s clock clk: spacemit: introduce pre-div for ddn clock dt-bindings: clock: spacemit: introduce i2s pre-clock to fix i2s clock clk: spacemit: ccu_pll: convert from round_rate() to determine_rate() clk: spacemit: ccu_mix: convert from round_rate() to determine_rate() clk: spacemit: ccu_ddn: convert from round_rate() to determine_rate() clk: spacemit: fix sspax_clk dt-bindings: clock: spacemit: CLK_SSPA_I2S_BCLK for SSPA |
||
|
Linus Torvalds
|
2f2c725493 |
pci-v6.18-changes
-----BEGIN PGP SIGNATURE-----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=BUw/
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
take config space accessor functions.
Implement pci_find_capability(), pci_find_ext_capability(), and
dwc, dwc endpoint, and cadence capability search interfaces with
them (Hans Zhang)
- Leave parent unit address 0 in 'interrupt-map' so that when we
build devicetree nodes to describe PCI functions that contain
multiple peripherals, we can build this property even when
interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)
- Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
Request Size to 128B to avoid a performance issue (Ilpo Järvinen)
- Add sysfs 'serial_number' file to expose the Device Serial Number
(Matthew Wood)
- Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)
Resource management:
- Align m68k pcibios_enable_device() with other arches (Ilpo
Järvinen)
- Remove sparc pcibios_enable_device() implementations that don't do
anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use
pci_enable_resources() instead (Ilpo Järvinen)
- Clean up bridge window sizing and assignment (Ilpo Järvinen),
including:
- Leave non-claimed bridge windows disabled
- Enable bridges even if a window wasn't assigned because not all
windows are required by downstream devices
- Preserve bridge window type when releasing the resource, since
the type is needed for reassignment
- Consolidate selection of bridge windows into two new
interfaces, pbus_select_window() and
pbus_select_window_for_type(), so this is done consistently
- Compute bridge window start and end earlier to avoid logging
stale information
MSI:
- Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
Vives)
Error handling:
- Align AER with EEH by allowing drivers to request a Bus Reset on
Non-Fatal Errors (in addition to the reset on Fatal Errors that we
already do) (Lukas Wunner)
- If error recovery fails, emit FAILED_RECOVERY uevents for the
devices, not for the bridge leading to them.
This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)
- Align AER with EEH by calling err_handler.error_detected()
callbacks to notify drivers if error recovery fails (Lukas Wunner)
- Align AER with EEH by restoring device error_state to
pci_channel_io_normal before the err_handler.slot_reset() callback.
This is earlier than before the err_handler.resume() callback
(Lukas Wunner)
- Emit a BEGIN_RECOVERY uevent when driver's
err_handler.error_detected() requests a reset, as well as when it
says recovery is complete or can be done without a reset (Niklas
Schnelle)
- Align s390 with AER and EEH by emitting uevents during error
recovery (Niklas Schnelle)
- Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
result of err_handler.error_detected() (Niklas Schnelle)
- Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
error information identifies a device without an AER Capability
(Breno Leitao)
- Update error decoding and TLP Log printing for new errors in
current PCIe base spec (Lukas Wunner)
- Update error recovery documentation to match the current code
and use consistent nomenclature (Lukas Wunner)
ASPM:
- Enable all ClockPM and ASPM states for devicetree platforms, since
there's typically no firmware that enables ASPM
This is a risky change that may uncover hardware or configuration
defects at boot-time rather than when users enable ASPM via sysfs
later. Booting with "pcie_aspm=off" prevents this enabling
(Manivannan Sadhasivam)
- Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)
Power management:
- If a device has already been disconnected, e.g., by a hotplug
removal, don't bother trying to resume it to D0 when detaching the
driver.
This avoids annoying "Unable to change power state from D3cold to
D0" messages (Mario Limonciello)
- Ensure devices are powered up before config reads for
'max_link_width', 'current_link_speed', 'current_link_width',
'secondary_bus_number', and 'subordinate_bus_number' sysfs files.
This prevents using invalid data (~0) in drivers or lspci and,
depending on how the PCIe controller reports errors, may avoid
error interrupts or crashes (Brian Norris)
Virtualization:
- Add rescan/remove locking when enabling/disabling SR-IOV, which
avoids list corruption on s390, where disabling SR-IOV also
generates hotplug events (Niklas Schnelle)
Peer-to-peer DMA:
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
Endpoint framework:
- Document sysfs interface for BAR assignment of vNTB endpoint
functions (Jerome Brunet)
- Fix array underflow in endpoint BAR test case (Dan Carpenter)
- Skip endpoint IRQ test if the IRQ is out of range to avoid false
errors (Christian Bruel)
- Fix endpoint test case for controllers with fixed-size BARs smaller
than requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the endpoint
doorbell test case can be run more than once (Niklas Cassel)
- Avoid a NULL pointer dereference when releasing DMA channels in
endpoint DMA test case (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint
Kselftest MSI_TEST test case (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests
don't overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly
skip future PERST# assertion (Vidya Sagar)
AMD MDB PCIe controller driver:
- Update DT binding example to separate PERST# to a Root Port stanza
to make multiple Root Ports possible in the future (Sai Krishna
Musham)
- Add driver support for PERST# being described in a Root Port
stanza, falling back to the host bridge if not found there (Sai
Krishna Musham)
Freescale i.MX6 PCIe controller driver:
- Enable the 3.3V Vaux supply if available so devices can request
wakeup with either Beacon or WAKE# (Richard Zhu)
MediaTek PCIe Gen3 controller driver:
- Add optional sys clock ready time setting to avoid sys_clk_rdy
signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196
(AngeloGioacchino Del Regno)
NVIDIA Tegra PCIe controller driver:
- When asserting PERST#, disable the controller instead of mistakenly
disabling the PLL twice (Nagarjuna Kristam)
- Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
Qualcomm PCIe controller driver:
- Select PCI Power Control Slot driver so slot voltage rails can be
turned on/off if described in Root Port devicetree node (Qiang Yu)
- Parse only PCI bridge child nodes in devicetree, skipping unrelated
nodes such as OPP (Operating Performance Points), which caused
probe failures (Krishna Chaitanya Chundru)
- Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)
- Consolidate Root Port 'phy' and 'reset' properties in struct
qcom_pcie_port, regardless of whether we got them from the Root
Port node or the host bridge node (Manivannan Sadhasivam)
- Fetch and map the ELBI register space in the DWC core rather than
in each driver individually (Krishna Chaitanya Chundru)
- Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
Shift Feature' and use this in the qcom driver (Krishna Chaitanya
Chundru)
- Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
Chundru)
- Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
Glymur, which is compatible with X1E80100 but doesn't have the
cnoc_sf_axi clock (Qiang Yu)
Renesas R-Car PCIe controller driver:
- Fix a typo that prevented correct PHY initialization (Marek Vasut)
- Add a missing 1ms delay after PWR reset assertion as required by
the V4H manual (Marek Vasut)
- Assure reset has completed before DBI access to avoid SError (Marek
Vasut)
- Fix inverted PHY initialization check, which sometimes led to
timeouts and failure to start the controller (Marek Vasut)
- Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
regression when converting to msi_create_parent_irq_domain()
(Claudiu Beznea)
- Drop the spinlock protecting the PMSR register - it's no longer
required since pci_lock already serializes accesses (Marek Vasut)
- Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
SOPHGO PCIe controller driver:
- Check for existence of struct cdns_pcie.ops before using it to
allow Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the SOPHGO SG2042 PCIe controller
(Chen Wang)
STMicroelectronics STM32MP25 PCIe controller driver:
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which
needs it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics
STM32MP25 in host and endpoint modes (Christian Bruel)
Synopsys DesignWare PCIe controller driver:
- Add support for x16 in devicetree 'num-lanes' property (Konrad
Dybcio)
- Verify that if DT specifies a single IRQ for all eDMA channels, it
is named 'dma' (Niklas Cassel)
TI J721E PCIe driver:
- Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
Vadapalli)
- Power controller off before configuring the glue layer so the
controller latches the correct values on power-on (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
exits with error (Siddharth Vadapalli)
- Add Peripheral Virtualization Unit (PVU), which restricts DMA from
PCIe devices to specific regions of host memory, to the ti,am65
binding (Jan Kiszka)
Xilinx NWL PCIe controller driver:
- Clear bootloader E_ECAM_CONTROL before merging in the new driver
value to avoid writing invalid values (Jani Nurminen)"
* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
PCI: xilinx-nwl: Fix ECAM programming
PCI: j721e: Fix incorrect error message in probe()
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
PCI: dwc: Support 16-lane operation
PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
PCI: rcar-gen4: Fix inverted break condition in PHY initialization
PCI: rcar-gen4: Assure reset occurs before DBI access
PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
PCI: Set up bridge resources earlier
PCI: rcar-host: Drop PMSR spinlock
...
|
||
|
Linus Torvalds
|
e4c0fdd5af |
dmaengine updates for v6.18
New support: - Intel idxd Wildcat Lake family support - SpacemiT K1 PDMA controller support - Renesas RZ/G3E family support Updates: - Xilinx shutdown support and dma client properties update - Designware edma callback_result support -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmjjb7oACgkQfBQHDyUj g0cSgxAAofgIjcjQVyAFr1CTYHJynDrTCtbULpQSGDZX9fBUVo32s21uypkHPxVw MVUJWznYvSvOqaFF0CEVZFQhQqu3V9V6QT5HySi+CEQmkkgtvgFQIJx+xNgOJ5+4 JhBPlJpZVXBDFV1i2/Gp1QRlHAAu3S8kO+k/kyRsNufSGx5TEpxf/RehefGRwxjA GbJ8XRy6ibbFP/BmXlhK/dbvbehOFNDq/omvBIMti6Vc1164PNu+p9iHRLFZERI8 X+QSYq+/l2Qbmnyy4tS3qS/m3xT8EcEPRyC5ro59dFdQ0+waKBZS169QveUkHZyT SnFZfjyCQR9pyUkd83A78kwGAT22npSvifa+BEhWk3iARiWv4/xeHPhKafjbTRkB 5gRoBqs+kLljx4MTuo/7iXx/as/UtqJvne5PtbDaMPZkEz/GSwXA3ifzmWlJRN7h s7NUV3IYrQ8tFnh96eOZmL6XFCWHeAHmjTtsI/H7UURrX+dX9VAVOsMS9rJPiJ7N vQB06WpAFZ+nir0drndNXrsc49ZjwMWBZJTfwpew7dm7/OSr3f/72wMUsrXpzCNo jRfGIZhouzNlC02bmYp0CoDp0lGEgtd7TGmC0IiRs6xRyXmo67i0VADvUZglKr0z Y3pIFInUqK2A1B8zuKPLqXVKiOwKwBNKetCl5cNcPGunDHNp28M= =C5z7 -----END PGP SIGNATURE----- Merge tag 'dmaengine-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "A couple of new device support and small driver updates for this round. New support: - Intel idxd Wildcat Lake family support - SpacemiT K1 PDMA controller support - Renesas RZ/G3E family support Updates: - Xilinx shutdown support and dma client properties update - Designware edma callback_result support" * tag 'dmaengine-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dt-bindings: dma: rz-dmac: Document RZ/G3E family of SoCs dmaengine: dw-edma: Set status for callback_result dmaengine: mv_xor: match alloc_wc and free_wc dmaengine: mmp_pdma: Add SpacemiT K1 PDMA support with 64-bit addressing dmaengine: mmp_pdma: Add operations structure for controller abstraction dmaengine: mmp_pdma: Add reset controller support dmaengine: mmp_pdma: Add clock support dt-bindings: dma: Add SpacemiT K1 PDMA controller dt-bindings: dmaengine: xilinx_dma: Remove DMA client properties dmaengine: Fix dma_async_tx_descriptor->tx_submit documentation dmaengine: xilinx_dma: Support descriptor setup from dma_vecs dmaengine: sh: setup_xref error handling dmaengine: Replace zero-length array with flexible-array dmaengine: ppc4xx: Remove space before newline dmaengine: idxd: Add a new IAA device ID for Wildcat Lake family platforms dmaengine: idxd: Replace memset(0) + strscpy() with strscpy_pad() dt-bindings: dma: nvidia,tegra20-apbdma: Add undocumented compatibles and "clock-names" dmaengine: zynqmp_dma: Add shutdown operation support |
||
|
Linus Torvalds
|
1d1ba4d390 |
phy-for-6.18
- New Support
- Qualcomm SM8750 QMP PCIe PHY dual lane support, PMIV0104 eusb2 repeater
support, QCS8300 eDP PHY support
- Renesas RZ/T2H and RZ/N2H support and updates to driver for that
- TI TCAN1051 phy support
- Rockchip rk3588 dphy support, RK3528 combphy support
- Updates
- cadence updates for calibration and polling for ready and enabling of
lower resolutions, runtime pm support,
- Rockchip: enable U3 otg port
- Renesas USXGMII mode support
- Qualcomm UFS PHY and PLL regulator load support
-----BEGIN PGP SIGNATURE-----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=UiHw
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"The usual bunch of device support and update to drivers.
New Support
- Qualcomm SM8750 QMP PCIe PHY dual lane support, PMIV0104 eusb2
repeater support, QCS8300 eDP PHY support
- Renesas RZ/T2H and RZ/N2H support and updates to driver for that
- TI TCAN1051 phy support
- Rockchip rk3588 dphy support, RK3528 combphy support
Updates:
- cadence updates for calibration and polling for ready and enabling
of lower resolutions, runtime pm support,
- Rockchip: enable U3 otg port
- Renesas USXGMII mode support
- Qualcomm UFS PHY and PLL regulator load support"
* tag 'phy-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (64 commits)
phy: rockchip: phy-rockchip-inno-csidphy: add support for rk3588 variant
phy: rockchip: phy-rockchip-inno-csidphy: allow for different reset lines
phy: rockchip: phy-rockchip-inno-csidphy: allow writes to grf register 0
dt-bindings: phy: rockchip-inno-csi-dphy: add rk3588 variant
dt-bindings: phy: rockchip-inno-csi-dphy: make power-domains non-required
phy: cadence: cdns-dphy: Enable lower resolutions in dphy
phy: renesas: r8a779f0-ether-serdes: add new step added to latest datasheet
phy: renesas: r8a779f0-ether-serdes: add USXGMII mode
phy: sophgo: Add USB 2.0 PHY driver for Sophgo CV18XX/SG200X
dt-bindings: phy: Add Sophgo CV1800 USB phy
phy: cadence: cdns-dphy: Update calibration wait time for startup state machine
phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling
phy: renesas: rcar-gen3-usb2: Fix ID check logic with VBUS valid
dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1051
phy: lynx-28g: check return value when calling lynx_28g_pll_get
phy: qcom: m31-eusb2: Fix the error log while enabling clock
phy: rockchip: usbdp: Remove redundant ternary operators
phy: renesas: rcar-gen3-usb2: Remove redundant ternary operators
phy: hisilicon: Remove redundant ternary operators
phy: qcom-qmp-ufs: Add PHY and PLL regulator load
...
|
||
|
Linus Torvalds
|
4b616669d1 |
ata changes for 6.18
- Improve the DT bindings documentation for the highbanck, imx and
xgene-ahci controllers (Krzysztof, Fabio, Rob).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCaOMqsAAKCRDdoc3SxdoY
dj/YAP99ErzH54Tr7Rjg3VtctK1aMpoVD1TOsFA2Dhm0AIXMVwD8DMXhXwk9mXGc
5JQvxMzDbkhTYOqWKhFewrJfACkpdQM=
=8u1H
-----END PGP SIGNATURE-----
Merge tag 'ata-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Damien Le Moal:
- Improve the DT bindings documentation for the highbanck, imx and
xgene-ahci controllers (Krzysztof, Fabio, Rob)
* tag 'ata-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
dt-bindings: ata: apm,xgene-ahci: Add apm,xgene-ahci-v2 support
dt-bindings: ata: imx: Document 'target-supply'
dt-bindings: ata: highbank: Minor whitespace cleanup in example
|
||
|
Rob Herring (Arm)
|
a6b4f791cd |
dt-bindings: rtc: Convert apm,xgene-rtc to DT schema
Convert the APM XGene RTC binding to DT schema format. It's a straight-forward conversion. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250924222848.2949235-1-robh@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> |
||
|
Linus Torvalds
|
6a74422b97 |
- switch longson32 platform to DT and use MIPS_GENERIC framework
- cleanups/fixes for lantiq DTs - other cleanups and fixes -----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmjiOcYaHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHBqZQ//Qmdm38fhZZ3jP5orvwq4 elaCs75/h+kEV4UrnzIrn0AqOjG3gl1PzZx47xrjlyfb1NFRqenLzt3SavtYQNuo 1555MdFoXgBRiJuGL5E6USDiZ5yjQBbfrMBxtKVrjwRrVouC6ge3o9ajmJsZ/H7J NcFdxeuaLebApaTLi7/og9m9kmnohjjB67fxFb0EdfpHNUHpr+I9dMhmwZ33t7tj XVvAxq3FCvz8mYCZvqr7F+02UoMmN8O6OGSfnRwaKm2KU6XczuR2urHF/4alLXO1 8Oswi4R8yXre62V5Mf5uiUjDoKG41Mv06F4f5fZYEHaJbit+SUzO9tFAv2Ky9g7E 75wrZPdY+S/TgCEHI5py2V4kB+9Dx0GzqrH+yhCf+dN8J1u+LDANgN6hk2u0A237 R0N1qv3aLvp8xwKqM0jCblzSJW1QqRkbp9lS+b6Ev3P+7Gtz8trq0yOmB9B3m5mj qKySfXGdMx0W/JHLv7YVAq4If52cTI4I1vqEE55CNdP0GQYSHZzOKjvkTsye/NrJ iMIZ4jNPd9FQGPO9gaw1IyQtoTNy55S5SE3t9DKf4o8KqVTyuAMy/2Rbt3gIPlcP eAbtuik3kPcgFDrtZIxR5ehh4lWbLSm8Kh3KLLmNb2Q52s8Qxx8Bykf416GK3rYM pdOBbDoLa3s+Zh/YvpP+BaA= =213r -----END PGP SIGNATURE----- Merge tag 'mips_6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - switch longson32 platform to DT and use MIPS_GENERIC framework - cleanups/fixes for lantiq DTs - other cleanups and fixes * tag 'mips_6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits) mips: math-emu: replace deprecated strcpy() in me-debugfs MIPS: configs: Consolidate Loongson1 defconfigs MIPS: Unify Loongson1 PRID_REV MIPS: loongson32: Switch to generic core MIPS: loongson: Add built-in DTB support MIPS: dts: loongson: Add CQ-T300B board MIPS: dts: loongson: Add Smartloong-1C board MIPS: dts: loongson: Add LSGZ_1B_DEV board MIPS: dts: loongson: Add LS1B-DEMO board dt-bindings: mips: loongson: Add LS1B-DEMO and CQ-T300B mips: lantiq: danube: rename stp node on EASY50712 reference board mips: lantiq: xway: sysctrl: rename stp clock MIPS: RB532: Replace deprecated strcpy() with memcpy() and strscpy() MIPS: Loongson64: Replace deprecated strcpy() with strscpy_pad() MIPS: generic: Replace deprecated strcpy() in ocelot_detect() MIPS: octeon: Replace deprecated strcpy() in octeon_model_get_string_buffer() MIPS: octeon: Replace memset(0) + deprecated strcpy() with strscpy_pad() MIPS: arc: Replace deprecated strcpy() with memcpy() MIPS: txx9: Replace deprecated strcpy() with strscpy() MIPS: sni: Replace deprecated strcpy() in sni_console_setup() ... |
||
|
Linus Torvalds
|
6093a688a0 |
Char/Misc/IIO/Binder changes for 6.18-rc1
Here is the big set of char/misc/iio and other driver subsystem changes
for 6.18-rc1. Loads of different stuff in here, it was a busy
development cycle in lots of different subsystems, with over 27k new
lines added to the tree. Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor
updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust. This is the big one, and
was driving a huge majority of the rust binding work over the past
years. Right now there are 2 binder drivers in the kernel, selected
only at build time as to which one to use as binder wants to be
included in the system at boot time. The binder C maintainers all
agreed on this, as eventually, they want the C code to be removed from
the tree, but it will take a few releases to get there while both
are maintained to ensure that the rust implementation is fully
stable and compliant with the existing userspace apis.
All of these have been in linux-next for a while, with only minor merge
issues showing up (you will hit them as well.) Just accept both sides
of the merge, it's just some header and include file lines, nothing
major.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaOEffA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynI/wCgjLFWH9B+huZI5JQb06NShggZod4AnjFFJ4ID
macHNv5/SjpAh7H5ssBU
=cjWS
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
|