mirror of
https://github.com/torvalds/linux.git
synced 2026-08-02 05:12:01 +02:00
be141849ec
1264546 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
4f712ee0cb |
S390:
* Changes to FPU handling came in via the main s390 pull request
* Only deliver to the guest the SCLP events that userspace has
requested.
* More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same).
* Fix selftests undefined behavior.
x86:
* Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can be
programmed *using the architectural encoding*. The enumeration does
NOT say anything about the encoding when the CPU doesn't report support
the event *in general*. It might support it, and it might support it
using the same encoding that made it into the architectural PMU spec.
* Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly emulates
RDMPC, counter availability, and a variety of other PMC-related
behaviors that depend on guest CPUID and therefore are easier to
validate with selftests than with custom guests (aka kvm-unit-tests).
* Zero out PMU state on AMD if the virtual PMU is disabled, it does not
cause any bug but it wastes time in various cases where KVM would check
if a PMC event needs to be synthesized.
* Optimize triggering of emulated events, with a nice ~10% performance
improvement in VM-Exit microbenchmarks when a vPMU is exposed to the
guest.
* Tighten the check for "PMI in guest" to reduce false positives if an NMI
arrives in the host while KVM is handling an IRQ VM-Exit.
* Fix a bug where KVM would report stale/bogus exit qualification information
when exiting to userspace with an internal error exit code.
* Add a VMX flag in /proc/cpuinfo to report 5-level EPT support.
* Rework TDP MMU root unload, free, and alloc to run with mmu_lock held for
read, e.g. to avoid serializing vCPUs when userspace deletes a memslot.
* Tear down TDP MMU page tables at 4KiB granularity (used to be 1GiB). KVM
doesn't support yielding in the middle of processing a zap, and 1GiB
granularity resulted in multi-millisecond lags that are quite impolite
for CONFIG_PREEMPT kernels.
* Allocate write-tracking metadata on-demand to avoid the memory overhead when
a kernel is built with i915 virtualization support but the workloads use
neither shadow paging nor i915 virtualization.
* Explicitly initialize a variety of on-stack variables in the emulator that
triggered KMSAN false positives.
* Fix the debugregs ABI for 32-bit KVM.
* Rework the "force immediate exit" code so that vendor code ultimately decides
how and when to force the exit, which allowed some optimization for both
Intel and AMD.
* Fix a long-standing bug where kvm_has_noapic_vcpu could be left elevated if
vCPU creation ultimately failed, causing extra unnecessary work.
* Cleanup the logic for checking if the currently loaded vCPU is in-kernel.
* Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere in the
kernel) are detected earlier and are less likely to hang the kernel.
x86 Xen emulation:
* Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the
gpa but the underlying host virtual address remains the same.
* When possible, use a single host TSC value when computing the deadline for
Xen timers in order to improve the accuracy of the timer emulation.
* Inject pending upcall events when the vCPU software-enables its APIC to fix
a bug where an upcall can be lost (and to follow Xen's behavior).
* Fall back to the slow path instead of warning if "fast" IRQ delivery of Xen
events fails, e.g. if the guest has aliased xAPIC IDs.
RISC-V:
* Support exception and interrupt handling in selftests
* New self test for RISC-V architectural timer (Sstc extension)
* New extension support (Ztso, Zacas)
* Support userspace emulation of random number seed CSRs.
ARM:
* Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
* Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
* Conversion of KVM's representation of LPIs to an xarray, utilized to
address serialization some of the serialization on the LPI injection
path
* Support for _architectural_ VHE-only systems, advertised through the
absence of FEAT_E2H0 in the CPU's ID register
* Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
* Set reserved bits as zero in CPUCFG.
* Start SW timer only when vcpu is blocking.
* Do not restart SW timer when it is expired.
* Remove unnecessary CSR register saving during enter guest.
* Misc cleanups and fixes as usual.
Generic:
* cleanup Kconfig by removing CONFIG_HAVE_KVM, which was basically always
true on all architectures except MIPS (where Kconfig determines the
available depending on CPU capabilities). It is replaced either by
an architecture-dependent symbol for MIPS, and IS_ENABLED(CONFIG_KVM)
everywhere else.
* Factor common "select" statements in common code instead of requiring
each architecture to specify it
* Remove thoroughly obsolete APIs from the uapi headers.
* Move architecture-dependent stuff to uapi/asm/kvm.h
* Always flush the async page fault workqueue when a work item is being
removed, especially during vCPU destruction, to ensure that there are no
workers running in KVM code when all references to KVM-the-module are gone,
i.e. to prevent a very unlikely use-after-free if kvm.ko is unloaded.
* Grab a reference to the VM's mm_struct in the async #PF worker itself instead
of gifting the worker a reference, so that there's no need to remember
to *conditionally* clean up after the worker.
Selftests:
* Reduce boilerplate especially when utilize selftest TAP infrastructure.
* Add basic smoke tests for SEV and SEV-ES, along with a pile of library
support for handling private/encrypted/protected memory.
* Fix benign bugs where tests neglect to close() guest_memfd files.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmX0iP8UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroND7wf+JZoNvwZ+bmwWe/4jn/YwNoYi/C5z
eypn8M1gsWEccpCpqPBwznVm9T29rF4uOlcMvqLEkHfTpaL1EKUUjP1lXPz/ileP
6a2RdOGxAhyTiFC9fjy+wkkjtLbn1kZf6YsS0hjphP9+w0chNbdn0w81dFVnXryd
j7XYI8R/bFAthNsJOuZXSEjCfIHxvTTG74OrTf1B1FEBB+arPmrgUeJftMVhffQK
Sowgg8L/Ii/x6fgV5NZQVSIyVf1rp8z7c6UaHT4Fwb0+RAMW8p9pYv9Qp1YkKp8y
5j0V9UzOHP7FRaYimZ5BtwQoqiZXYylQ+VuU/Y2f4X85cvlLzSqxaEMAPA==
=mqOV
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"S390:
- Changes to FPU handling came in via the main s390 pull request
- Only deliver to the guest the SCLP events that userspace has
requested
- More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same)
- Fix selftests undefined behavior
x86:
- Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can
be programmed *using the architectural encoding*. The enumeration
does NOT say anything about the encoding when the CPU doesn't
report support the event *in general*. It might support it, and it
might support it using the same encoding that made it into the
architectural PMU spec
- Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly
emulates RDMPC, counter availability, and a variety of other
PMC-related behaviors that depend on guest CPUID and therefore are
easier to validate with selftests than with custom guests (aka
kvm-unit-tests)
- Zero out PMU state on AMD if the virtual PMU is disabled, it does
not cause any bug but it wastes time in various cases where KVM
would check if a PMC event needs to be synthesized
- Optimize triggering of emulated events, with a nice ~10%
performance improvement in VM-Exit microbenchmarks when a vPMU is
exposed to the guest
- Tighten the check for "PMI in guest" to reduce false positives if
an NMI arrives in the host while KVM is handling an IRQ VM-Exit
- Fix a bug where KVM would report stale/bogus exit qualification
information when exiting to userspace with an internal error exit
code
- Add a VMX flag in /proc/cpuinfo to report 5-level EPT support
- Rework TDP MMU root unload, free, and alloc to run with mmu_lock
held for read, e.g. to avoid serializing vCPUs when userspace
deletes a memslot
- Tear down TDP MMU page tables at 4KiB granularity (used to be
1GiB). KVM doesn't support yielding in the middle of processing a
zap, and 1GiB granularity resulted in multi-millisecond lags that
are quite impolite for CONFIG_PREEMPT kernels
- Allocate write-tracking metadata on-demand to avoid the memory
overhead when a kernel is built with i915 virtualization support
but the workloads use neither shadow paging nor i915 virtualization
- Explicitly initialize a variety of on-stack variables in the
emulator that triggered KMSAN false positives
- Fix the debugregs ABI for 32-bit KVM
- Rework the "force immediate exit" code so that vendor code
ultimately decides how and when to force the exit, which allowed
some optimization for both Intel and AMD
- Fix a long-standing bug where kvm_has_noapic_vcpu could be left
elevated if vCPU creation ultimately failed, causing extra
unnecessary work
- Cleanup the logic for checking if the currently loaded vCPU is
in-kernel
- Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere
in the kernel) are detected earlier and are less likely to hang the
kernel
x86 Xen emulation:
- Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the gpa
but the underlying host virtual address remains the same
- When possible, use a single host TSC value when computing the
deadline for Xen timers in order to improve the accuracy of the
timer emulation
- Inject pending upcall events when the vCPU software-enables its
APIC to fix a bug where an upcall can be lost (and to follow Xen's
behavior)
- Fall back to the slow path instead of warning if "fast" IRQ
delivery of Xen events fails, e.g. if the guest has aliased xAPIC
IDs
RISC-V:
- Support exception and interrupt handling in selftests
- New self test for RISC-V architectural timer (Sstc extension)
- New extension support (Ztso, Zacas)
- Support userspace emulation of random number seed CSRs
ARM:
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized
to address serialization some of the serialization on the LPI
injection path
- Support for _architectural_ VHE-only systems, advertised through
the absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
- Set reserved bits as zero in CPUCFG
- Start SW timer only when vcpu is blocking
- Do not restart SW timer when it is expired
- Remove unnecessary CSR register saving during enter guest
- Misc cleanups and fixes as usual
Generic:
- Clean up Kconfig by removing CONFIG_HAVE_KVM, which was basically
always true on all architectures except MIPS (where Kconfig
determines the available depending on CPU capabilities). It is
replaced either by an architecture-dependent symbol for MIPS, and
IS_ENABLED(CONFIG_KVM) everywhere else
- Factor common "select" statements in common code instead of
requiring each architecture to specify it
- Remove thoroughly obsolete APIs from the uapi headers
- Move architecture-dependent stuff to uapi/asm/kvm.h
- Always flush the async page fault workqueue when a work item is
being removed, especially during vCPU destruction, to ensure that
there are no workers running in KVM code when all references to
KVM-the-module are gone, i.e. to prevent a very unlikely
use-after-free if kvm.ko is unloaded
- Grab a reference to the VM's mm_struct in the async #PF worker
itself instead of gifting the worker a reference, so that there's
no need to remember to *conditionally* clean up after the worker
Selftests:
- Reduce boilerplate especially when utilize selftest TAP
infrastructure
- Add basic smoke tests for SEV and SEV-ES, along with a pile of
library support for handling private/encrypted/protected memory
- Fix benign bugs where tests neglect to close() guest_memfd files"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
selftests: kvm: remove meaningless assignments in Makefiles
KVM: riscv: selftests: Add Zacas extension to get-reg-list test
RISC-V: KVM: Allow Zacas extension for Guest/VM
KVM: riscv: selftests: Add Ztso extension to get-reg-list test
RISC-V: KVM: Allow Ztso extension for Guest/VM
RISC-V: KVM: Forward SEED CSR access to user space
KVM: riscv: selftests: Add sstc timer test
KVM: riscv: selftests: Change vcpu_has_ext to a common function
KVM: riscv: selftests: Add guest helper to get vcpu id
KVM: riscv: selftests: Add exception handling support
LoongArch: KVM: Remove unnecessary CSR register saving during enter guest
LoongArch: KVM: Do not restart SW timer when it is expired
LoongArch: KVM: Start SW timer only when vcpu is blocking
LoongArch: KVM: Set reserved bits as zero in CPUCFG
KVM: selftests: Explicitly close guest_memfd files in some gmem tests
KVM: x86/xen: fix recursive deadlock in timer injection
KVM: pfncache: simplify locking and make more self-contained
KVM: x86/xen: remove WARN_ON_ONCE() with false positives in evtchn delivery
KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled
KVM: x86/xen: improve accuracy of Xen timers
...
|
||
|
Linus Torvalds
|
8a2fbffcbf |
This includes the following changes related to sparc for v6.9:
- Fix missing prototype warnings in various places, including switching to using generic cmpdi2/ucmpdi2 and parport.h and stop selecting unneeded GENERIC_ISA_DMA. - Reduce duplicate code by using shared font data, with dependency fixup in separate commit touching lib/fonts. - Convert sbus drives to use remove callbacks returning void - Fix return values of __setup handlers - Section mismatch fix for grpci pci drivers - Make the vio bus type constant - Kconfig cleanups and fixes - Typo fixes -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQQfqfbgobF48oKMeq81AykqDLayywUCZfQtuhQcYW5kcmVhc0Bn YWlzbGVyLmNvbQAKCRA1AykqDLayy85XAQChTv3muYGiLSyX2r5leQrxZwWNjdiw W6uc+pM6nCVryAEA+KtjosgriNo7wZViEWqXyYjs/csdEekLpj4U2qBphAg= =19B/ -----END PGP SIGNATURE----- Merge tag 'sparc-for-6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc Pull sparc updates from Andreas Larsson: - Fix missing prototype warnings in various places, including switching to using generic cmpdi2/ucmpdi2 and parport.h and stop selecting unneeded GENERIC_ISA_DMA. - Reduce duplicate code by using shared font data, with dependency fixup in separate commit touching lib/fonts. - Convert sbus drives to use remove callbacks returning void - Fix return values of __setup handlers - Section mismatch fix for grpci pci drivers - Make the vio bus type constant - Kconfig cleanups and fixes - Typo fixes * tag 'sparc-for-6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc: lib/fonts: Allow Sparc console 8x16 font for sparc64 early boot text console sbus: uctrl: Convert to platform remove callback returning void sbus: flash: Convert to platform remove callback returning void sbus: envctrl: Convert to platform remove callback returning void sbus: display7seg: Convert to platform remove callback returning void sbus: bbc_i2c: Convert to platform remove callback returning void sbus: Add prototype for bbc_envctrl_init and bbc_envctrl_cleanup to header sparc32: Fix section mismatch in leon_pci_grpci sparc32: Fix parport build with sparc32 sparc32: Do not select GENERIC_ISA_DMA mtd: maps: sun_uflash: Declare uflash_devinit static sparc32: Fix build with trapbase sparc32: Use generic cmpdi2/ucmpdi2 variants sparc: select FRAME_POINTER instead of redefining it sparc: vDSO: fix return value of __setup handler sparc64: NMI watchdog: fix return value of __setup handler sparc: vio: make vio_bus_type const sparc: Fix typos sparc: Use shared font data sparc: remove obsolete config ARCH_ATU |
||
|
Linus Torvalds
|
54f42d2ca8 |
- added support for Mobileye SoCs
- unified GPR/CP0 regs handling for uasm - cleanups and fixes -----BEGIN PGP SIGNATURE----- iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmX0Fx4aHHRzYm9nZW5k QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHDraxAAkrN9HiaozP0NtXfMPb5v 7aJiPbgDrABmUxsvPAf054rtSGrORhNG9PM7+PYxhp0kYgb4vqVrh+ICTBVFKkZr MwGiYahkgddPlpaowh8G7HtrMyiW5CpMh6O31nw88OYGjoRuwCic8z8kQlzZMNJe JGgX+TNJtDW0yUp93zOu+j99ImByfgC7P1/V+8fRJ7js3trQ/JWEpW0e+nez/2Sz SNANiDA6g8scGvh9OOEwBG4jh6XLbRSOvMECskCCTGOBDpzJCN59j1irC2JRnZ6H PIirv6sfK4/n8/YpCLa+j9DOdHl2D/bW2LLE0sYVfew5T2lK3yainhdHIbsCC/J1 89YiXi6I1anD4nERODSEkq40naQJVwuM3LPW2pVVcUyRDP28cEsqn7MDJp1L79fq sxtUy+Kur4ryCALwlaYBIVI+9SRAvcV8b9z0Z37dpN57h49d+o65tEuYle69t7Cy uM9ECTE3ZqgHvuyvSmRH69KLEuGahLavtUHjGs60or1cgVXznQpqMvS9soIa+IAQ uuZo7Cb0TBedVAEjcFSxAMrpmx+sGKAPvWauqBFHH9wrTOjYbkzGQGCRABXjafmi vGgGYCYbRhFFrPJXf48hAsdLNqOxwXotvCU/9eP2HwxaZD8OTArhrO/j+dMqiapm //2zHnmcSZ4H17ml8YySiqQ= =M7G5 -----END PGP SIGNATURE----- Merge tag 'mips_6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - added support for Mobileye SoCs - unified GPR/CP0 regs handling for uasm - cleanups and fixes * tag 'mips_6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (56 commits) mips: cm: Convert __mips_cm_phys_base() to weak function mips: cm: Convert __mips_cm_l2sync_phys_base() to weak function mips: dts: ralink: mt7621: add cell count properties to usb mips: dts: ralink: mt7621: add serial1 and serial2 nodes mips: dts: ralink: mt7621: reorder serial0 properties mips: dts: ralink: mt7621: associate uart1_pins with serial0 MIPS: ralink: Don't use "proxy" headers mips: sibyte: make tb_class constant mips: mt: make mt_class constant MIPS: ralink: Remove unused of_gpio.h bus: bt1-apb: Remove duplicate include MAINTAINERS: remove entry to non-existing file in MOBILEYE MIPS SOCS MIPS: mipsregs: Parse fp and sp register by name in parse_r tty: mips_ejtag_fdc: Fix passing incompatible pointer type warning mips: zboot: Fix "no previous prototype" build warning MIPS: mipsregs: Set proper ISA level for virt extensions MIPS: Implement microMIPS MT ASE helpers MIPS: Limit MIPS_MT_SMP support by ISA reversion MIPS: Loongson64: test for -march=loongson3a cflag MIPS: BMIPS: Drop unnecessary assembler flag ... |
||
|
David Teigland
|
484b4f90c2 |
dlm: revert atomic_t lkb_wait_count
Revert "fs: dlm: handle lkb wait count as atomic_t"
This reverts commit
|
||
|
Linus Torvalds
|
ab522e1478 |
Devicetree updates for v6.9:
DT core:
- Add cleanup.h based auto release of struct device_node pointers via
__free marking and new for_each_child_of_node_scoped() iterator to use
it.
- Always create a base skeleton DT when CONFIG_OF is enabled. This
supports several usecases of adding DT data on non-DT booted systems.
- Move around some /reserved-memory code in preparation for further
improvements
- Add a stub for_each_property_of_node() for !OF
- Adjust the printk levels on some messages
- Fix __be32 sparse warning
- Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
(currently orphaned)
- Add Saravana Kannan and drop Frank Rowand as DT maintainers
DT bindings:
- Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
xlnx,sd-fec to DT schemas
- Add existing, but undocumented fsl,imx-anatop binding
- Add bunch of undocumented vendor prefixes used in compatible strings
- Drop obsolete brcm,bcm2835-pm-wdt binding
- Drop obsolete i2c.txt which as been replaced with schema in dtschema
- Add DPS310 device and sort trivial-devices.yaml
- Enable undocumented compatible checks on DT binding examples
- More QCom maintainer fixes/updates
- Updates to writing-schema.rst and DT submitting-patches.rst to cover
some frequent review comments
- Clean-up SPDX tags to use 'OR' rather than 'or'
-----BEGIN PGP SIGNATURE-----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=YzNN
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add cleanup.h based auto release of struct device_node pointers via
__free marking and new for_each_child_of_node_scoped() iterator to
use it.
- Always create a base skeleton DT when CONFIG_OF is enabled. This
supports several usecases of adding DT data on non-DT booted
systems.
- Move around some /reserved-memory code in preparation for further
improvements
- Add a stub for_each_property_of_node() for !OF
- Adjust the printk levels on some messages
- Fix __be32 sparse warning
- Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
(currently orphaned)
- Add Saravana Kannan and drop Frank Rowand as DT maintainers
DT bindings:
- Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
xlnx,sd-fec to DT schemas
- Add existing, but undocumented fsl,imx-anatop binding
- Add bunch of undocumented vendor prefixes used in compatible
strings
- Drop obsolete brcm,bcm2835-pm-wdt binding
- Drop obsolete i2c.txt which as been replaced with schema in
dtschema
- Add DPS310 device and sort trivial-devices.yaml
- Enable undocumented compatible checks on DT binding examples
- More QCom maintainer fixes/updates
- Updates to writing-schema.rst and DT submitting-patches.rst to
cover some frequent review comments
- Clean-up SPDX tags to use 'OR' rather than 'or'"
* tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
of: unittest: Use for_each_child_of_node_scoped()
of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
of: Add cleanup.h based auto release via __free(device_node) markings
of: Move all FDT reserved-memory handling into of_reserved_mem.c
of: Add KUnit test to confirm DTB is loaded
of: unittest: treat missing of_root as error instead of fixing up
x86/of: Unconditionally call unflatten_and_copy_device_tree()
um: Unconditionally call unflatten_device_tree()
of: Create of_root if no dtb provided by firmware
of: Always unflatten in unflatten_and_copy_device_tree()
dt-bindings: timer: mediatek: Convert to json-schema
dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support
soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage
dt-bindings: fsl-imx-sdma: fix HDMI audio index
dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6
dt-bindings: soc: imx: fsl,imx-anatop: add binding
dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML
dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
of: make for_each_property_of_node() available to to !OF
...
|
||
|
Linus Torvalds
|
3c5d127fb5 |
MTD
The Carillo Ranch driver has been removed. Top level mtd bindings have
received a couple of improvements (references, selects). The ssfdc
driver received few minor adjustments. These changes come with the usual
load of misc/small improvements and fixes.
Raw NAND
The main series brought is an update of the Broadcom support to support
all BCMBCA SoCs and their specificity (ECC, write protection,
configuration straps), plus a few misc fixes and changes in the main
driver. Device tree updates are also part of this PR, initially because
of a misunderstanding on my side.
The STM32_FMC2 controller driver is also upgraded to properly support
MP1 and MP25 SoCs.
A new compatible is added for an Atmel flavor.
Among all these feature changes, there is as well a load of continuous
read related fixes, avoiding more corner conditions and clarifying the
logic. Finally a few miscellaneous fixes are made to the core, the
lpx32xx_mlc, fsl_lbc, Meson and Atmel controller driver, as well as
final one in the Hynix vendor driver.
SPI-NAND
The ESMT support has been extended to match 5 bytes ID to avoid
collisions. Winbond support on its side receives support for W25N04KV
chips.
SPI NOR
SPI NOR gets the non uniform erase code cleaned. We stopped using
bitmasks for erase types and flags, and instead introduced dedicated
members. We then passed the SPI NOR erase map to MTD. Users can now
determine the erase regions and make informed decisions on partitions
size.
An optional interrupt property is now described in the bindings.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmX0LpsACgkQJWrqGEe9
VoSOCwf8CLhMAsVs/9SrRPMwLuFUGD0IuYYsPl/+qOFXePQOVxNW8s8+DdVrQngW
Oi+unW8MAizPAwMPL9AiyS12WbDVT2qyO0uwX5/efhxXwoNkk+F74icxDBBe1FOu
tnvRRdqY6Zg94T4c1M9BnV5LtW+ozk+F9K8UsYvqnDOcOuaA64qmXRem63s0Jctu
lnmCWHQ0+A8iL7RQ7OMbQswcYQlbnpt7p3lyvDc3dW8K3TRzUtP4nnabL8eiYhqu
ho5SvbWhls91EYf/ij6+SFteV5KN4p+v1ymK2u/AqvCkIW8dAfiIhvvT8dWswpUV
CyC44BFbj3/1ZeSQG4GCXzcNXwnztQ==
=mSyp
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD:
- The Carillo Ranch driver has been removed
- Top level mtd bindings have received a couple of improvements
(references, selects)
- The ssfdc driver received few minor adjustments
- The usual load of misc/small improvements and fixes
Raw NAND:
- The main series brought is an update of the Broadcom support to
support all BCMBCA SoCs and their specificity (ECC, write
protection, configuration straps), plus a few misc fixes and
changes in the main driver. Device tree updates are also part of
this PR, initially because of a misunderstanding on my side.
- The STM32_FMC2 controller driver is also upgraded to properly
support MP1 and MP25 SoCs.
- A new compatible is added for an Atmel flavor.
- Among all these feature changes, there is as well a load of
continuous read related fixes, avoiding more corner conditions and
clarifying the logic. Finally a few miscellaneous fixes are made to
the core, the lpx32xx_mlc, fsl_lbc, Meson and Atmel controller
driver, as well as final one in the Hynix vendor driver.
SPI-NAND:
- The ESMT support has been extended to match 5 bytes ID to avoid
collisions. Winbond support on its side receives support for
W25N04KV chips.
SPI NOR:
- SPI NOR gets the non uniform erase code cleaned. We stopped using
bitmasks for erase types and flags, and instead introduced
dedicated members. We then passed the SPI NOR erase map to MTD.
Users can now determine the erase regions and make informed
decisions on partitions size.
- An optional interrupt property is now described in the bindings"
* tag 'mtd/for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (50 commits)
mtd: rawnand: Ensure continuous reads are well disabled
mtd: rawnand: Constrain even more when continuous reads are enabled
mtd: rawnand: brcmnand: Add support for getting ecc setting from strap
mtd: rawnand: brcmnand: fix sparse warnings
mtd: nand: raw: atmel: Fix comment in timings preparation
mtd: rawnand: Ensure all continuous terms are always in sync
mtd: rawnand: Add a helper for calculating a page index
mtd: rawnand: Fix and simplify again the continuous read derivations
mtd: rawnand: hynix: remove @nand_technology kernel-doc description
dt-bindings: atmel-nand: add microchip,sam9x7-pmecc
mtd: rawnand: brcmnand: Support write protection setting from dts
mtd: rawnand: brcmnand: Add BCMBCA read data bus interface
mtd: rawnand: brcmnand: Rename bcm63138 nand driver
arm64: dts: broadcom: bcmbca: Update router boards
arm64: dts: broadcom: bcmbca: Add NAND controller node
ARM: dts: broadcom: bcmbca: Add NAND controller node
mtd: spi-nor: core: correct type of i
mtd: spi-nor: core: set mtd->eraseregions for non-uniform erase map
mtd: spi-nor: core: get rid of SNOR_OVERLAID_REGION flag
mtd: spi-nor: core: get rid of SNOR_LAST_REGION flag
...
|
||
|
Linus Torvalds
|
2b3a4192dd |
dmaengine updates for v6.9
New support: - Allwinner H616 dma support - Renesas r8a779h0 dma controller support - TI CSI2RX dma support Updates: - Freescale edma driver updates for TCD64csupport for i.MX95 - constify of pointers and args - Yaml conversion for MediaTek High-Speed controller binding - TI k3 udma support for TX/RX DMA channels for thread IDs -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmX0MpIACgkQfBQHDyUj g0eMQQ//d9YF7tSxm8yNY+q4kilDm2kZCV/5DZzKbCxAZ7kQLGJF7byuDeGRWd1t mmRgVVebLUcNEH2U9Ato+db2yyNl6lTqs3ghq8dtMBCt0JQwVU2aOm/bZDCHx5lw 6j7YLYk6r0qLEI7oTX5VHg7KFXBkZvRK8LReVPW4GCKH0ERbvRC5ZjfV0pprj1k6 mV6RvNDw63EX9s5vuNzfWGHuziX6XoOUas7rNo3hwOUGp5tJcKrJVIQtRynwHrSB C+dveuqybn+a59gJSekeGqsDebx/ZH1g+r1KWzxsPHKW/Xw+fMneNj2iTyPj2L86 qGxEcedLon2LE4PvrALighBc2itOCI7NnXQm2q83lJUby7iYds1awYeHUqmOIU+N RKtcl7hfMuX2F71vMTv7QZCOR8eBIkFKkqc+iU4BD2mMm9tv6AAG5UNnxFDencQ7 1Rytw3u5N93l9lw6ISUb8WvVbumYn9EQ3A9Nr71NFpVG50e4pRhwDN2VWaKkBmM5 NbMUjzxfKdW68eRHAnWr9hGHHWzeep3e37x+DAgmPEtu99qOxnBv2L/xx1tiPrlV nv6VKNIxJOaUgmwTfXyrAHRwyOKqd4yXVRB0RY7npUPB3GELCKH+pcvom7zx4PAF h/yyNpF1VfXgevgkqNoZlX+sNNdurhhoDpiJxb2tZah9uYr8WT0= =DZRZ -----END PGP SIGNATURE----- Merge tag 'dmaengine-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "New hardware support: - Allwinner H616 dma support - Renesas r8a779h0 dma controller support - TI CSI2RX dma support Updates: - Freescale edma driver updates for TCD64csupport for i.MX95 - constify of pointers and args - Yaml conversion for MediaTek High-Speed controller binding - TI k3 udma support for TX/RX DMA channels for thread IDs: * tag 'dmaengine-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (25 commits) dmaengine: of: constify of_phandle_args in of_dma_find_controller() dmaengine: pl08x: constify pointer to char in filter function MAINTAINERS: change in AMD ptdma maintainer MAINTAINERS: adjust file entry in MEDIATEK DMA DRIVER dmaengine: idxd: constify the struct device_type usage dt-bindings: renesas,rcar-dmac: Add r8a779h0 support dt-bindings: dma: convert MediaTek High-Speed controller to the json-schema dmaengine: idxd: make dsa_bus_type const dmaengine: fsl-edma: integrate TCD64 support for i.MX95 dt-bindings: fsl-dma: fsl-edma: add fsl,imx95-edma5 compatible string dmaengine: mcf-edma: utilize edma_write_tcdreg() macro for TCD Access dmaengine: fsl-edma: add address for channel mux register in fsl_edma_chan dmaengine: fsl-edma: fix spare build warning dmaengine: fsl-edma: involve help macro fsl_edma_set(get)_tcd() dt-bindings: mmp-dma: convert to YAML dmaengine: ti: k3-psil-j721s2: Add entry for CSI2RX dmaengine: ti: k3-udma-glue: Add function to request RX chan for thread ID dmaengine: ti: k3-udma-glue: Add function to request TX chan for thread ID dmaengine: ti: k3-udma-glue: Update name for remote RX channel device dmaengine: ti: k3-udma-glue: Add function to parse channel by ID ... |
||
|
Linus Torvalds
|
b898db92f1 |
soundwire updates for 6.9
- Constify sdw_bus and sdw_master_type objects - use of rtd helper for better code - intel aux device remove redundant assignment -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmX0LhwACgkQfBQHDyUj g0cdXA/8DNcS29aL7VozqKlD1ULZQHBLYdrHzQUSQfGBVE/8c57A6VES7IXkUsJ5 LuXNPTWZmij1k4jnNF35pB2ihdNNBpCvN8KRmSoaNK1/J17NCwhqA6uOZbN0UzZT 6cZ5x0lveCBHVhpQak64ONZoJgS95k6BZ1pLLG6uq50mtxNg2872naZ3Sd5OZ59E 3aUOh7UMOGgG9sBZpq9AKYqM3JFiSKH5V8DgRNBgfYL3F2rK1GzoLieNcEPGhtsh YKbNsYUsJjjdwsKr1/9IjIdeVvXopeFEPV3+jPuBNlPIQJyDV0CJO2z1l/PD7WWc rKA0JF2TxmdCT7ki0e+INiebdCAZ2N5ljPE+xDuWbkwSHtCqeCUVkFsB/mErsGdY jGSOrxGyrkRkEnY1s7caDhL7V8Y1uf7SZ0Drj//mWqw/7FGsAJbW83iw0mLJMifH SmWmvxNnU033x+ZRMa0vbRd3ODgYaSJaW5UcIxRad9teHe+VxO+b4Ic7oD5Bgj90 tjP+sbnHFoPORsY8HI1AsA9jQojb5hbXyo7RkD+FBlqPSA2IXEswNxG3OoKaHK76 266fndX3SAEXAbna3NIYU1BjMo20VXgn2quKhuuk3fVrqBNg7PLuGgyRu/ooAhiT Oviou9ii4FuGPjinVu5G4jUq3EaMhEEQypGabYvcKKAF2Faou/8= =bsoN -----END PGP SIGNATURE----- Merge tag 'soundwire-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: - Constify sdw_bus and sdw_master_type objects - use of rtd helper for better code - intel aux device remove redundant assignment * tag 'soundwire-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: Use snd_soc_substream_to_rtd() to obtain rtd soundwire: constify the struct device_type usage soundwire: bus_type: make sdw_bus_type const soundwire: intel_auxdevice: remove redundant assignment to variable link_flags soundwire: stream: add missing const to Documentation |
||
|
Mark Brown
|
f107ffcaa0
|
ASoC: SOF: amd: Skip IRAM/DRAM size modification
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>: This patch series restores audio support on Valve's Steam Deck OLED model, which broke after the recent introduction of ACP/PSP communication for IRAM/DRAM fence register programming. |
||
|
Linus Torvalds
|
c77756d3da |
Minor changes to the I2C core. Most changes are in the drivers section
and are described by Andi in the merge commit -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmX0JOUACgkQFA3kzBSg KbbTCxAAgCVztwSoiyTIz51MUpgu755P2iN20daAJGBOP9osqFTGSnDVx7+sRL+p XClyoYxQBzX7lS8rE1yR1/UD+eyhuqaafx1Gn1kDtysTZ58BwSPss7z5jqsh1jko 23ItKiOHG9aezBqXIFeotHbsuhyiTuyvuzpxsXEDyr4lNQMxVzvYRhF2evOnGB1v 4rPfbKKUfoLFxarvb/OK1CK+nzQeptOytu3C9DuscuPtgqNmFUYuAKGnGCsPjWjq nHX/N5n80PsTTCXAMR+3L+HuJFK5vHMwmMgvhGN1z0WhKCStthuHIZSuwSBuTjSB SaXvAS+xO5mGC7DQFiDFmwZupCYokrrk1AqdtSNYNE4IDGZEVbYbnNK3romrJC4Q g43CxLCBGVvAxV9wOYPKwW4M8HkrRM3GaQEJwAk2Cmm+e1orQ9UJAwvp27hiLwYI t4PmhR/mNHjJL09CnRL/cPkxW3sdeEbqu/3aKUAHi1s27FOcpw1gWYBRJJfikhE7 cyHc+crcjmTyeSZgHNrkP8u9cWpr4ptIbsgiExFQUqaEORwCjlSMxNtE2YKRqLcs +9iTOjoKEHPEX1gSco8Ni++bFMGmZ9aa9/Z2Keof7UyNn1D845Ykv9DtKZOgV9rJ 4Kmb6ZAz3mIheV0iOm5ylMoweCzyLXQ88JymMb0oQ7OssWN6BEw= =Hm22 -----END PGP SIGNATURE----- Merge tag 'i2c-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Minor changes to the I2C core. Most changes are in drivers: The i801 and designware drivers received most of the changes, including refactorings and some additions. Recovery changes for the iMX and iMX-LPI2C are now utilizing the generic i2c support. The Cadence driver now supports system suspend and resume. The hisi, mpc, sh_mobile, and npcm drivers have undergone some cleanups and improvements. Meanwhile, Uwe continues his work on converting the "remove" callback to become a void function. The pca954x mux driver now supports additional configurations, such as isolating faulty channels and flushing stuck buses, among others. Support has been added for Renesas r8a779h0, i.MX95 LPI2C, and Microchip sam9x7. Meanwhile, Geert lays the groundwork for the upcoming R-Car Gen4" * tag 'i2c-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits) i2c: sprd: Convert to platform remove callback returning void Documentation: i2c: Document that client auto-detection is a legacy mechanism i2c: remove redundant condition i2c: rcar: Prepare for the advent of ARCH_RCAR_GEN4 i2c: imx-lpi2c: add generic GPIO recovery for LPI2C i2c: cadence: Add system suspend and resume PM support i2c: mpc: remove outdated macro i2c: mpc: use proper binding for transfer timeouts dt-bindings: i2c: mpc: use proper binding for transfer timeouts i2c: smbus: Prepare i2c_register_spd for usage on muxed segments i2c: constify the struct device_type usage i2c: designware: Implement generic polling mode code for Wangxun 10Gb NIC i2c: designware: Fix RX FIFO depth define on Wangxun 10Gb NIC i2c: designware: Move interrupt handling functions before i2c_dw_xfer() i2c: designware: Use accessors to DW_IC_INTR_MASK register i2c: designware: Do not enable interrupts shortly in polling mode i2c: designware: Uniform initialization flow for polling mode dt-bindings: i2c: at91: Add sam9x7 compatible string dt-bindings: i2c: imx-lpi2c: add i.MX95 LPI2C i2c: Remove redundant comparison in npcm_i2c_reg_slave ... |
||
|
Matt Scialabba
|
81c32343d0 |
Input: xpad - add support for Snakebyte GAMEPADs
Add Snakebyte GAMEPAD BASE X and Snakebyte GAMEPAD RGB X to the list of supported devices. Signed-off-by: Matt Scialabba <matt.git@fastmail.fm> Link: https://lore.kernel.org/r/efbfb428-06b0-48f9-8701-db291c2a9d65@app.fastmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> |
||
|
Linus Torvalds
|
4757c3c64a |
libnvdimm updates for v6.9
- ACPI_NFIT Kconfig documetation fix - Make nvdimm_bus_type const - Make dax_bus_type const - remove SLAB_MEM_SPREAD flag usage in DAX -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE5DAy15EJMCV1R6v9YGjFFmlTOEoFAmXzXRkACgkQYGjFFmlT OErtJxAA1/83IIfJ/3gaqzHe/NPqiuTPpcOtHrCKZ3ug2DrCeKNKfHAB9ODCnGX8 LHDKacRLBexJSyXYRzfRxNQNg9RqhC2bpuCzDTk6ulxHYBP6aEZScnQ4RSm8K2Zo dOJ9VvzO1MlWYLwhLnqbz5apkOvj1dSdlsdbMQBMD7ZlvK2AReNVCqIlPUjPH4HG Z/Mw6v7Z1qGVQNr5Nt4/lHkSrNaSBUmMaI6gEZn0PGwFPqmU5qYOZtBM8zPtUbFF g9IBs69EVqh3cfTMrHqFJebEaqiVOBrGZk5bQ6CgrAVHyjpoPQSQHLclqaYIi6bD pyF1o4EKUF94OB7AKIVg6JxF5jAscMg7Xo7tlcv2KZCcqFxt+DOAJX/uGMhjSyfv FB20bI3lN+d2Hmrg3Q6IMGYi4KWyIhSaJOAFDJA5rUYqR7dyzLMqbp/sZo7j43Z3 YQrJxfV92TMGS/nVJUL1Kvb+dgc2+ZSycZiQP1MHuxPqMKL2WgSkz0shPx0iJ5o+ wKuOEjOlGffZrdRy1z6F1Px62JelLe7sMTtMKN5Ft3P1eG6wV52eEV/ripV/+whP VrmlA2QfKE4XioVRJn+3GFJicObPA+P/qfpYK8Hf0Nfd9p6MR8YqfRfy5Y8qDU78 g/2uBxp45VXs1bN86ZWnjJZdQqmmA6Zlyda6N3+DC8OLtvgnU2g= =Ztme -----END PGP SIGNATURE----- Merge tag 'libnvdimm-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dave Jiang: - ACPI_NFIT Kconfig documetation fix - Make nvdimm_bus_type const - Make dax_bus_type const - remove SLAB_MEM_SPREAD flag usage in DAX * tag 'libnvdimm-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: remove SLAB_MEM_SPREAD flag usage device-dax: make dax_bus_type const nvdimm: make nvdimm_bus_type const libnvdimm: Fix ACPI_NFIT in BLK_DEV_PMEM help |
||
|
Krzysztof Kozlowski
|
0883f1d89d |
dt-bindings: input: samsung,s3c6410-keypad: convert to DT Schema
Convert Samsung SoC Keypad bindings to DT schema with changes: 1. Rename "linux,keypad-no-autorepeat" property to "linux,input-no-autorepeat", because the latter was implemented in the Linux driver. 2. Add clocks and clock-names, already used by DTS and the Linux driver. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20240312183001.714626-1-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> |
||
|
Linus Torvalds
|
6dff52b828 |
Not a ton of stuff happening in the clk framework in this pull request. We got
some more devm helpers and we seem to be going in the direction of "just turn
this stuff on already and leave me alone!" with the addition of a
devm_clk_bulk_get_all_enable() API. I'm hoping that we can make that into a
genpd that drivers attach instead, but this API should help drivers simplify in
the meantime.
Outside of the devm wrappers, we've got the usual clk driver updates that are
dominated by the major phone SoC vendors (Samsung and Qualcomm) and the
non-critical driver fixes for things like incorrect topology descriptions and
wrong registers or bit fields. More details are below, but I'd say that it
looks pretty ordinary. The only thing that really jumps out at me is the
Renesas clk driver that's ignoring clks that are assigned to remote processors
in DeviceTree. That's a new feature that they're using to avoid marking clks as
CLK_IGNORE_UNUSED based on the configuration of the system.
Core:
- Increase dev_id len for clkdev lookups
- Add a devm_clk_bulk_get_all_enable() API to get and enable all clks
for a device
- Add a devm variant of clk_rate_exclusive_get()
New Drivers:
- Display, TCSR, GPU, and Camera clock controllers for Qualcomm's X1 Elite SoC
- Google GS101 PERIC0 and PERIC1 clock controllers
- Exynos850 PDMA clocks
- Exynos850 CPU cluster 0 and 1 (CMU_CPUCLK0/CMU_CPUCLK1) clock controllers
Removed Drivers:
- Remove the unused Qualcomm sc7180 modem clk driver
Updates:
- Fix some static checker errors in the Hisilicon clk driver
- Polarfire MSSPLL hardware has 4 output clocks (the driver supported
previously only one output); each of these 4 outputs feed dividers and the
output of each divider feed individual hardware blocks (e.g. CAN, Crypto,
eMMC); individual hardware block drivers need to control their clocks thus
clock driver support was added for all MSSPLL output clocks
- Typo fixes in the Qualcomm IPQ5018 GCC driver
- Add "qdss_at" clk on Qualcomm IPQ6018, needed for WiFi
- Properly terminate frequency tables in different Qualcomm clk drivers
- Add MDSS, crypto, and SDCC resets on Qualcomm MSM8953
- Add missing UFS CLKREF clks on Qualcomm SC8180X
- Avoid significant delays during boot by adding a softdep on rpmhpd to
Qualcomm SDM845 gcc driver
- Add QUPv3 RCGS w/ DFS and video resets to Qualcomm SM8150 GCC driver
- Fix the custom GPU GX "do-nothing" method in the Qualcomm GDSC driver
- Add an external regulator to GX GDSC on Qualcomm SC8280XP GPU clk driver
- Switch display, GPU, video, and camera Qualcomm clk drivers to
module_platform_driver()
- Set a longer delay for Venus resets on many Qualcomm SoCs
- Correct the GDSC wait times in the Qualcomm SDM845 display clk driver
- Fix clock listing Oops on Amlogic axg
- New pll-rate for Rockchip rk3568
- i2s rate improvements for Rockchip rk3399
- Rockchip rk3588 syscon clock fixes and removal of overall clock-number from
the rk3588 binding header
- A prerequisite for later improvements to the Rockchip rk3588 linked clocks
- Minor clean-ups and error handling improvements in both composite-8m and SCU
i.MX clock drivers
- Fix for SAI_MCLK_SEL definition for i.MX8MP
- Register the Samsung CMU MISC clock controller earlier, so the Multi Core
Timer clocksource can use it on Google GS101
- Propagate Exynos850 SPI IPCLK rate change to parents, so the SPI will get
proper clock rates
- Refactor the generic Samsung CPU clock controllers code, preparing it for
supporting Exynos850 CPU clocks
- Fix some clk kerneldoc warnings
- Add Ethernet, SDHI, DMA, and HyperFLASH/QSPI (RPC-IF) clocks on Renesas
R-Car V4M
- Ignore all clocks which are assigned to a non-Linux system in the Renesas
clk driver
- Add watchdog clock on Renesas RZ/G3S
- Add camera (CRU) clock and reset on Renesas RZ/G2UL
- Add support for the Renesas R-Car V4M (R8A779H0) SoC
- Convert some clk bindings to YAML so they can be validated
-----BEGIN PGP SIGNATURE-----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=rRIa
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Not a ton of stuff happening in the clk framework. We got some more
devm helpers and we seem to be going in the direction of "just turn
this stuff on already and leave me alone!" with the addition of a
devm_clk_bulk_get_all_enable() API. I'm hoping that we can make that
into a pmdomain that drivers attach instead, but this API should help
drivers simplify in the meantime.
Outside of the devm wrappers, we've got the usual clk driver updates
that are dominated by the major phone SoC vendors (Samsung and
Qualcomm) and the non-critical driver fixes for things like incorrect
topology descriptions and wrong registers or bit fields. More details
are below, but I'd say that it looks pretty ordinary. The only thing
that really jumps out at me is the Renesas clk driver that's ignoring
clks that are assigned to remote processors in DeviceTree. That's a
new feature that they're using to avoid marking clks as
CLK_IGNORE_UNUSED based on the configuration of the system.
Core:
- Increase dev_id len for clkdev lookups
- Add a devm_clk_bulk_get_all_enable() API to get and enable all clks
for a device
- Add a devm variant of clk_rate_exclusive_get()
New Drivers:
- Display, TCSR, GPU, and Camera clock controllers for Qualcomm's X1
Elite SoC
- Google GS101 PERIC0 and PERIC1 clock controllers
- Exynos850 PDMA clocks
- Exynos850 CPU cluster 0 and 1 (CMU_CPUCLK0/CMU_CPUCLK1) clock
controllers
Removed Drivers:
- Remove the unused Qualcomm sc7180 modem clk driver
Updates:
- Fix some static checker errors in the Hisilicon clk driver
- Polarfire MSSPLL hardware has 4 output clocks (the driver supported
previously only one output); each of these 4 outputs feed dividers
and the output of each divider feed individual hardware blocks
(e.g. CAN, Crypto, eMMC); individual hardware block drivers need to
control their clocks thus clock driver support was added for all
MSSPLL output clocks
- Typo fixes in the Qualcomm IPQ5018 GCC driver
- Add "qdss_at" clk on Qualcomm IPQ6018, needed for WiFi
- Properly terminate frequency tables in different Qualcomm clk
drivers
- Add MDSS, crypto, and SDCC resets on Qualcomm MSM8953
- Add missing UFS CLKREF clks on Qualcomm SC8180X
- Avoid significant delays during boot by adding a softdep on rpmhpd
to Qualcomm SDM845 gcc driver
- Add QUPv3 RCGS w/ DFS and video resets to Qualcomm SM8150 GCC
driver
- Fix the custom GPU GX "do-nothing" method in the Qualcomm GDSC
driver
- Add an external regulator to GX GDSC on Qualcomm SC8280XP GPU clk
driver
- Switch display, GPU, video, and camera Qualcomm clk drivers to
module_platform_driver()
- Set a longer delay for Venus resets on many Qualcomm SoCs
- Correct the GDSC wait times in the Qualcomm SDM845 display clk
driver
- Fix clock listing Oops on Amlogic axg
- New pll-rate for Rockchip rk3568
- i2s rate improvements for Rockchip rk3399
- Rockchip rk3588 syscon clock fixes and removal of overall
clock-number from the rk3588 binding header
- A prerequisite for later improvements to the Rockchip rk3588 linked
clocks
- Minor clean-ups and error handling improvements in both
composite-8m and SCU i.MX clock drivers
- Fix for SAI_MCLK_SEL definition for i.MX8MP
- Register the Samsung CMU MISC clock controller earlier, so the
Multi Core Timer clocksource can use it on Google GS101
- Propagate Exynos850 SPI IPCLK rate change to parents, so the SPI
will get proper clock rates
- Refactor the generic Samsung CPU clock controllers code, preparing
it for supporting Exynos850 CPU clocks
- Fix some clk kerneldoc warnings
- Add Ethernet, SDHI, DMA, and HyperFLASH/QSPI (RPC-IF) clocks on
Renesas R-Car V4M
- Ignore all clocks which are assigned to a non-Linux system in the
Renesas clk driver
- Add watchdog clock on Renesas RZ/G3S
- Add camera (CRU) clock and reset on Renesas RZ/G2UL
- Add support for the Renesas R-Car V4M (R8A779H0) SoC
- Convert some clk bindings to YAML so they can be validated"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
clk: zynq: Prevent null pointer dereference caused by kmalloc failure
clk: fractional-divider: Use bit operations consistently
clk: fractional-divider: Move mask calculations out of lock
clk: Fix clk_core_get NULL dereference
clk: starfive: jh7110-vout: Convert to platform remove callback returning void
clk: starfive: jh7110-isp: Convert to platform remove callback returning void
clk: imx: imx8-acm: Convert to platform remove callback returning void
clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset
clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'
clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk'
clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc
clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe()
clk: Add a devm variant of clk_rate_exclusive_get()
...
|
||
|
Ard Biesheuvel
|
b3810c5a2c |
x86/efistub: Clear decompressor BSS in native EFI entrypoint
The EFI stub on x86 no longer invokes the decompressor as a subsequent boot stage, but calls into the decompression code directly while running in the context of the EFI boot services. This means that when using the native EFI entrypoint (as opposed to the EFI handover protocol, which clears BSS explicitly), the firmware PE image loader is being relied upon to ensure that BSS is zeroed before the EFI stub is entered from the firmware. As Radek's report proves, this is a bad idea. Not all loaders do this correctly, which means some global variables that should be statically initialized to 0x0 may have junk in them. So clear BSS explicitly when entering via efi_pe_entry(). Note that zeroing BSS from C code is not generally safe, but in this case, the following assignment and dereference of a global pointer variable ensures that the memset() cannot be deferred or reordered. Cc: <stable@kernel.org> # v6.1+ Reported-by: Radek Podgorny <radek@podgorny.cz> Closes: https://lore.kernel.org/all/a99a831a-8ad5-4cb0-bff9-be637311f771@podgorny.cz Signed-off-by: Ard Biesheuvel <ardb@kernel.org> |
||
|
Linus Torvalds
|
eb7cca1faf |
media updates for v6.9-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmXz6uoACgkQCF8+vY7k 4RX3MQ/+LOHOMkufbq9qxLtbq9/2Wrdzym0q6j2RzD4r2ou4+DPJS8kc7c4eX02M 9G37SL5LbLVT5OjMEP7ShZtBSmbAoqqxJOPxCWII32M3PbcV0QTYrTJg4LdyLry+ vZz1KqYqMOaCJk5oy41RrYwwB+dhYu19gXSbw73sXoxOI24m/MAErsf2WLSk/ojk lcz7UIOWWLOXH08im6+GoqFbMWv6j8a72J7mXdguu+k+dBou/TkPnND7dq5wC17S dRLzQyYUm0fRIya/Hnoj/Cd0yUn/8NVPogG8Om/Nqt8BvCLZEihvKSVc8NJukavD /3LlZ2oj39NzV6oRwpUdAwHFH7KXuEZM/aQX06Wl34AfXXpFleTBQD40kSo/AHIq Kg9GGL9Z2V7F1pHrx4VlouUpfGMS0lZig4oL70ZrFmz6jWVDE/Vg4xN9mOl6RraX S43fHP7abLSg8XvKDX+Gdb5/NzA3Zkom5EdIFLPEd2DBCS3n59KkFXQ3AqVm4XaK HV8WnIOw4qcmH4H/8yxUpLCd/s7ACNuT72pws9YWCZOGD+Wv2tHU21aFiCOiB5ol VlxBxttez3c3Il8UWJaaApCqM9Mn7bMMB/KMUSJzUt785cK0sS0/4D6cbYE0Zdqr 9IancZHiKMzbN14rNAqjUX8sqNNzPtVPDISLuXsN7MvzfjlOFLE= =YxyV -----END PGP SIGNATURE----- Merge tag 'media/v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - DVB budget legacy API was finally documented. It took only 20+ years to get some documentation about it... - hantro driver has gained support for STM32MP25 VDEC/VENC - rkisp1 has gained support for i.MX8MP - atomisp got rid of two items from its todo list. Still 5 items pending for moving it out of staging - lots of driver fixes, cleanups and improvements * tag 'media/v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (252 commits) media: rcar-isp: Disallow unbind of devices media: usbtv: Remove useless locks in usbtv_video_free() media: mediatek: vcodec: avoid -Wcast-function-type-strict warning media: ttpci: fix two memleaks in budget_av_attach media: go7007: fix a memleak in go7007_load_encoder media: dvb-frontends: avoid stack overflow warnings with clang media: pvrusb2: fix uaf in pvr2_context_set_notify media: usb: s2255: Refactor s2255_get_fx2fw media: ti: j721e-csi2rx: Convert to platform remove callback returning void media: stm32-dcmipp: Convert to platform remove callback returning void media: nxp: imx8-isi: Convert to platform remove callback returning void media: nuvoton: Convert to platform remove callback returning void media: chips-media: wave5: Convert to platform remove callback returning void media: chips-media: wave5: Remove unnecessary semicolons media: i2c: imx290: Fix IMX920 typo media: platform: replace of_graph_get_next_endpoint() media: i2c: replace of_graph_get_next_endpoint() media: ivsc: csi: Make use of sub-device state media: ivsc: csi: Swap SINK and SOURCE pads media: ipu-bridge: Serialise calls to IPU bridge init ... |
||
|
Song Shuai
|
700c2d9b1b
|
riscv: vector: Fix a typo of preempt_v
The term "preempt_v" represents the RISCV_PREEMPT_V field of riscv_v_flags and is used in lots of comments. Here corrects the miss-spelling "prempt_v". And s/acheived/achieved/. Reviewed-by: Andy Chiu <andybnac@gmail.com> Signed-off-by: Song Shuai <songshuaishuai@tinylab.org> Link: https://lore.kernel.org/r/20240221100252.3990445-1-songshuaishuai@tinylab.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Palmer Dabbelt
|
07f2c040fa
|
Merge patch series "riscv: mm: Extend mappable memory up to hint address"
Charlie Jenkins <charlie@rivosinc.com> says: On riscv, mmap currently returns an address from the largest address space that can fit entirely inside of the hint address. This makes it such that the hint address is almost never returned. This patch raises the mappable area up to and including the hint address. This allows mmap to often return the hint address, which allows a performance improvement over searching for a valid address as well as making the behavior more similar to other architectures. Note that a previous patch introduced stronger semantics compared to other architectures for riscv mmap. On riscv, mmap will not use bits in the upper bits of the virtual address depending on the hint address. On other architectures, a random address is returned in the address space requested. On all architectures the hint address will be returned if it is available. This allows riscv applications to configure how many bits in the virtual address should be left empty. This has the two benefits of being able to request address spaces that are smaller than the default and doesn't require the application to know the page table layout of riscv. * b4-shazam-merge: docs: riscv: Define behavior of mmap selftests: riscv: Generalize mm selftests riscv: mm: Use hint address in mmap if available Link: https://lore.kernel.org/r/20240130-use_mmap_hint_address-v3-0-8a655cfa8bcb@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Palmer Dabbelt
|
099dbac6e9
|
Merge patch series "riscv: Use Kconfig to set unaligned access speed"
Charlie Jenkins <charlie@rivosinc.com> says: If the hardware unaligned access speed is known at compile time, it is possible to avoid running the unaligned access speed probe to speedup boot-time. * b4-shazam-merge: riscv: Set unaligned access speed at compile time riscv: Decouple emulated unaligned accesses from access speed riscv: Only check online cpus for emulated accesses riscv: lib: Introduce has_fast_unaligned_access() Link: https://lore.kernel.org/r/20240308-disable_misaligned_probe_config-v9-0-a388770ba0ce@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Palmer Dabbelt
|
0fd283cb64
|
Merge patch series "Support Andes PMU extension"
Yu Chien Peter Lin <peterlin@andestech.com> says: This patch series introduces the Andes PMU extension, which serves the same purpose as Sscofpmf and Smcntrpmf. Its non-standard local interrupt is assigned to bit 18 in the custom S-mode local interrupt enable and pending registers (slie/slip), while the interrupt cause is (256 + 18). * b4-shazam-merge: riscv: andes: Support specifying symbolic firmware and hardware raw events riscv: dts: renesas: Add Andes PMU extension for r9a07g043f dt-bindings: riscv: Add Andes PMU extension description perf: RISC-V: Introduce Andes PMU to support perf event sampling perf: RISC-V: Eliminate redundant interrupt enable/disable operations riscv: dts: renesas: r9a07g043f: Update compatible string to use Andes INTC dt-bindings: riscv: Add Andes interrupt controller compatible string riscv: errata: Rename defines for Andes Link: https://lore.kernel.org/r/20240222083946.3977135-1-peterlin@andestech.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Palmer Dabbelt
|
3b6be8d235
|
Merge patch "riscv: Fix compilation error with FAST_GUP and rv32"
I'm picking this up on top of the broken patch for the merge window, as the offending patch breaks the rv32 build and was itself a fix so isn't on for-next. * b4-shazam-merge: riscv: Fix compilation error with FAST_GUP and rv32 riscv: Fix pte_leaf_size() for NAPOT Revert "riscv: mm: support Svnapot in huge vmap" Link: https://lore.kernel.org/r/20240304080247.387710-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Linus Torvalds
|
c442a42363 |
fs/9p changes for the 6.9 merge window
This pull request includes a number of patches addressing improvements in the cache portions of the 9p client. The biggest improvements have to do with fixing handling of inodes and eliminating duplicate structures and unnecessary allocation/release of inode structures and many associated unnecessary protocol traffic. This also dramatically reduced code complexity across the code and sets us up to add proper temporal cache capabilities. Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEElpbw0ZalkJikytFRiP/V+0pf/5gFAmX0XX0ACgkQiP/V+0pf /5jdgg//UCY+RTB9UNr/B1I5sj1m36l0BfFB/jaAMApH5/bQPF2mgtjD1jQL2qk2 gbAvR25erDdKiggRAbNU6OGVBIKXHiUPnL5d6UNgeyQQu1wSzStCejTfoQ/mwgTl 1N2Uge63zz5L0XgJm31gPcKSlJAD1r70UgsPw0ldkimEPqiBQjQu5VQqUWKgrkBe hcdXbuZbmXBLfZv9i0XI9BmwIeaSRwY2qx/JUr2eCoAXrDRNfwBRVMAfqpJ6L6I0 56C5Q2EDjipUnYp1Z3fqg80IUa+MnoF3rbMyMj54JBWxAPyMspamUBltYlZb5pRv zvjSJk3Uof8Wzc+beVVbyV2NmC6gC/cm2MnSYZBTX1KWTMl46eiloSrFz+Pv1/O1 8rcZFQuw8uAox9/4qc1lPCAC0hZVUFelj8NpCPN8aHS3cF0eN/MCQ3qfBkFgo8um jMYTUiai1tjdxWUWrUSpSKFHzBcL986+1bnE7qwI3qPXrxrnB9kOhzSilDJSuHnV Ei6zinvMEUBmKYLdNaCQ9N1KTKPr0bqXIlEvk4LDaGLGkZbI7eKuN5mCxZB0DXCc 65WSc5G9NYux9QjobR+TUwwLdiQH84w/3zYS41r/as7VqABcj/X/2b2ZfQ6/WBuF I0CmSWz2gfcpQQc642dzZJk7UP4wOVtsW3F2JAQ1GPq/D5UOmWU= =1LU1 -----END PGP SIGNATURE----- Merge tag '9p-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs Pull 9p updates from Eric Van Hensbergen: "This includes a number of patches addressing improvements in the cache portions of the 9p client. The biggest improvements have to do with fixing handling of inodes and eliminating duplicate structures and unnecessary allocation/release of inode structures and many associated unnecessary protocol traffic. This also dramatically reduced code complexity across the code and sets us up to add proper temporal cache capabilities" * tag '9p-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: fs/9p: fix dups even in uncached mode fs/9p: simplify iget to remove unnecessary paths fs/9p: rework qid2ino logic fs/9p: Eliminate now unused v9fs_get_inode fs/9p: Eliminate redundant non-cache path in mknod fs/9p: remove walk and inode allocation from symlink fs/9p: convert mkdir to use get_new_inode fs/9p: switch vfsmount to use v9fs_get_new_inode |
||
|
Alexander Stein
|
7e98fe49f8 |
dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
imx6q has additional regulators compared to imx6ul. Add them to the list of allowed patterns. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240314145953.2957313-1-alexander.stein@ew.tq-group.com Signed-off-by: Rob Herring <robh@kernel.org> |
||
|
Linus Torvalds
|
6ce8b2ce0d |
fuse update for 6.9
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCZfLjeQAKCRDh3BK/laaZ PBYQAQDqYZzq91Kn5jdvjaSd+6I/+x7MDLOIP5hPX0HJLuBxWAEAqENoo4Of0GTC ltW7DKrQy9E3CMp6VKSLVJPN4BYP9gk= =GvOE -----END PGP SIGNATURE----- Merge tag 'fuse-update-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse updates from Miklos Szeredi: - Add passthrough mode for regular file I/O. This allows performing read and write (also via memory maps) on a backing file without incurring the overhead of roundtrips to userspace. For now this is only allowed to privileged servers, but this limitation will go away in the future (Amir Goldstein) - Fix interaction of direct I/O mode with memory maps (Bernd Schubert) - Export filesystem tags through sysfs for virtiofs (Stefan Hajnoczi) - Allow resending queued requests for server crash recovery (Zhao Chen) - Misc fixes and cleanups * tag 'fuse-update-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (38 commits) fuse: get rid of ff->readdir.lock fuse: remove unneeded lock which protecting update of congestion_threshold fuse: Fix missing FOLL_PIN for direct-io fuse: remove an unnecessary if statement fuse: Track process write operations in both direct and writethrough modes fuse: Use the high bit of request ID for indicating resend requests fuse: Introduce a new notification type for resend pending requests fuse: add support for explicit export disabling fuse: __kuid_val/__kgid_val helpers in fuse_fill_attr_from_inode() fuse: fix typo for fuse_permission comment fuse: Convert fuse_writepage_locked to take a folio fuse: Remove fuse_writepage virtio_fs: remove duplicate check if queue is broken fuse: use FUSE_ROOT_ID in fuse_get_root_inode() fuse: don't unhash root fuse: fix root lookup with nonzero generation fuse: replace remaining make_bad_inode() with fuse_make_bad() virtiofs: drop __exit from virtio_fs_sysfs_exit() fuse: implement passthrough for mmap fuse: implement splice read/write passthrough ... |
||
|
Ricardo B. Marliere
|
07283c1873 |
ktest: force $buildonly = 1 for 'make_warnings_file' test type
The test type "make_warnings_file" should have no mandatory configuration parameters other than the ones required by the "build" test type, because its purpose is to create a file with build warnings that may or may not be used by other subsequent tests. Currently, the only way to use it as a stand-alone test is by setting POWER_CYCLE, CONSOLE, SSH_USER, BUILD_TARGET, TARGET_IMAGE, REBOOT_TYPE and GRUB_MENU. Link: https://lkml.kernel.org/r/20240315-ktest-v2-1-c5c20a75f6a3@marliere.net Cc: John Hawley <warthog9@eaglescrag.net> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> |
||
|
Alexandre Ghiti
|
2bb7e0c493
|
riscv: Fix compilation error with FAST_GUP and rv32
By surrounding the definition of pte_leaf_size() with a ifdef napot as
it should have been.
Fixes:
|
||
|
Linus Torvalds
|
68bf6bfdcf |
Ext4 bug fixes and cleanups for 6.9-rc1, plus some additional kunit
tests. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmXydHkACgkQ8vlZVpUN gaPFcQf/e1DcEw7dITXoOJ16Sz3pI3ykFEae3aIp1C0DoBL6ncnx4NrKJlbKVmfG CvYwwaPIILps0W5gwRll0wG8G9wrx+QY+xx5elsFKlfLsiRmkvXEIFPELYvtblcG u6fXumpArtH2dbjsmxw+gxEuborl3aeOIWW62dVvarEpfdvFlEwMAfBYlJ/E4HKM z74CmR09sr51XuQZTKaUNioyS6qNR/HIBoelJ50Xt6qLZrpfyIxtU/wHbN1GAM5+ pBXCYxlBaiSJHb8p9R99DT5JqVD5zwrqWscbajEhOJo4QQQacJGGvIOHz6b6FMRV +dPnTBh79t8DAktqT6LAf83bmiRCWQ== =4/t9 -----END PGP SIGNATURE----- Merge tag 'ext4_for_linus-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "Ext4 bug fixes and cleanups, plus some additional kunit tests" * tag 'ext4_for_linus-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits) ext4: initialize sbi->s_freeclusters_counter and sbi->s_dirtyclusters_counter before use in kunit test ext4: hold group lock in ext4 kunit test ext4: alloc test super block from sget ext4: kunit: use dynamic inode allocation ext4: enable meta_bg only when new desc blocks are needed ext4: remove unused parameter biop in ext4_issue_discard() ext4: remove SLAB_MEM_SPREAD flag usage ext4: verify s_clusters_per_group even without bigalloc ext4: fix corruption during on-line resize ext4: don't report EOPNOTSUPP errors from discard ext4: drop duplicate ea_inode handling in ext4_xattr_block_set() ext4: fold quota accounting into ext4_xattr_inode_lookup_create() ext4: correct best extent lstart adjustment logic ext4: forbid commit inconsistent quota data when errors=remount-ro ext4: add a hint for block bitmap corrupt state in mb_groups ext4: fix the comment of ext4_map_blocks()/ext4_ext_map_blocks() ext4: improve error msg for ext4_mb_seq_groups_show ext4: remove unused buddy_loaded in ext4_mb_seq_groups_show ext4: Add unit test for ext4_mb_mark_diskspace_used ext4: Add unit test for mb_free_blocks ... |
||
|
Cristian Ciocaltea
|
094d11768f
|
ASoC: SOF: amd: Skip IRAM/DRAM size modification for Steam Deck OLED
The recent introduction of the ACP/PSP communication for IRAM/DRAM fence
register modification breaks the audio support on Valve's Steam Deck
OLED device.
It causes IPC timeout errors when trying to load DSP topology during
probing:
1707255557.688176 kernel: snd_sof_amd_vangogh 0000:04:00.5: ipc tx timed out for 0x30100000 (msg/reply size: 48/0)
1707255557.689035 kernel: snd_sof_amd_vangogh 0000:04:00.5: ------------[ IPC dump start ]------------
1707255557.689421 kernel: snd_sof_amd_vangogh 0000:04:00.5: dsp_msg = 0x0 dsp_ack = 0x91d14f6f host_msg = 0x1 host_ack = 0xead0f1a4 irq_stat >
1707255557.689730 kernel: snd_sof_amd_vangogh 0000:04:00.5: ------------[ IPC dump end ]------------
1707255557.690074 kernel: snd_sof_amd_vangogh 0000:04:00.5: ------------[ DSP dump start ]------------
1707255557.690376 kernel: snd_sof_amd_vangogh 0000:04:00.5: IPC timeout
1707255557.690744 kernel: snd_sof_amd_vangogh 0000:04:00.5: fw_state: SOF_FW_BOOT_COMPLETE (7)
1707255557.691037 kernel: snd_sof_amd_vangogh 0000:04:00.5: invalid header size 0xdb43fe7. FW oops is bogus
1707255557.694824 kernel: snd_sof_amd_vangogh 0000:04:00.5: unexpected fault 0x6942d3b3 trace 0x6942d3b3
1707255557.695392 kernel: snd_sof_amd_vangogh 0000:04:00.5: ------------[ DSP dump end ]------------
1707255557.695755 kernel: snd_sof_amd_vangogh 0000:04:00.5: Failed to setup widget PIPELINE.6.ACPHS1.IN
1707255557.696069 kernel: snd_sof_amd_vangogh 0000:04:00.5: error: tplg component load failed -110
1707255557.696374 kernel: snd_sof_amd_vangogh 0000:04:00.5: error: failed to load DSP topology -22
1707255557.697904 kernel: snd_sof_amd_vangogh 0000:04:00.5: ASoC: error at snd_soc_component_probe on 0000:04:00.5: -22
1707255557.698405 kernel: sof_mach nau8821-max: ASoC: failed to instantiate card -22
1707255557.701061 kernel: sof_mach nau8821-max: error -EINVAL: Failed to register card(sof-nau8821-max)
1707255557.701624 kernel: sof_mach: probe of nau8821-max failed with error -22
Introduce a new member skip_iram_dram_size_mod to struct acp_quirk_entry and
use it to skip IRAM/DRAM size modification for Vangogh Galileo device.
Fixes:
|
||
|
Cristian Ciocaltea
|
33c3d81333
|
ASoC: SOF: amd: Move signed_fw_image to struct acp_quirk_entry
The signed_fw_image member of struct sof_amd_acp_desc is used to enable signed firmware support in the driver via the acp_sof_quirk_table. In preparation to support additional use cases of the quirk table (i.e. adding new flags), move signed_fw_image to a new struct acp_quirk_entry and update all references to it accordingly. No functional changes intended. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Link: https://msgid.link/r/20240220201623.438944-2-cristian.ciocaltea@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Linus Torvalds
|
32a50540c3 |
bcachefs updates for 6.9
- Subvolume children btree; this is needed for providing a userspace
interface for walking subvolumes, which will come later
- Lots of improvements to directory structure checking
- Improved journal pipelining, significantly improving performance on
high iodepth write workloads
- Discard path improvements: the discard path is more efficient, and no
longer flushes the journal unnecessarily
- Buffered write path can now avoid taking the inode lock
- new mm helper: memalloc_flags_{save|restore}
- mempool now does kvmalloc mempools
-----BEGIN PGP SIGNATURE-----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=6xnj
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-03-13' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs updates from Kent Overstreet:
- Subvolume children btree; this is needed for providing a userspace
interface for walking subvolumes, which will come later
- Lots of improvements to directory structure checking
- Improved journal pipelining, significantly improving performance on
high iodepth write workloads
- Discard path improvements: the discard path is more efficient, and no
longer flushes the journal unnecessarily
- Buffered write path can now avoid taking the inode lock
- new mm helper: memalloc_flags_{save|restore}
- mempool now does kvmalloc mempools
* tag 'bcachefs-2024-03-13' of https://evilpiepirate.org/git/bcachefs: (128 commits)
bcachefs: time_stats: shrink time_stat_buffer for better alignment
bcachefs: time_stats: split stats-with-quantiles into a separate structure
bcachefs: mean_and_variance: put struct mean_and_variance_weighted on a diet
bcachefs: time_stats: add larger units
bcachefs: pull out time_stats.[ch]
bcachefs: reconstruct_alloc cleanup
bcachefs: fix bch_folio_sector padding
bcachefs: Fix btree key cache coherency during replay
bcachefs: Always flush write buffer in delete_dead_inodes()
bcachefs: Fix order of gc_done passes
bcachefs: fix deletion of indirect extents in btree_gc
bcachefs: Prefer struct_size over open coded arithmetic
bcachefs: Kill unused flags argument to btree_split()
bcachefs: Check for writing superblocks with nonsense member seq fields
bcachefs: fix bch2_journal_buf_to_text()
lib/generic-radix-tree.c: Make nodes more reasonably sized
bcachefs: copy_(to|from)_user_errcode()
bcachefs: Split out bkey_types.h
bcachefs: fix lost journal buf wakeup due to improved pipelining
bcachefs: intercept mountoption value for bool type
...
|
||
|
Pavel Begunkov
|
5e3afe580a |
io_uring: fix poll_remove stalled req completion
Taking the ctx lock is not enough to use the deferred request completion
infrastructure, it'll get queued into the list but no one would expect
it there, so it will sit there until next io_submit_flush_completions().
It's hard to care about the cancellation path, so complete it via tw.
Fixes:
|
||
|
Steven Rostedt
|
ca8edb78c1 |
ktest.pl: Process variables within variables
Allow a variable to contain another variable. This will allow the
${shell <command>} to have its command include variables.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
||
|
Vitaly Prosyak
|
f34e8bb7d6 |
drm/sched: fix null-ptr-deref in init entity
The bug can be triggered by sending an amdgpu_cs_wait_ioctl
to the AMDGPU DRM driver on any ASICs with valid context.
The bug was reported by Joonkyo Jung <joonkyoj@yonsei.ac.kr>.
For example the following code:
static void Syzkaller2(int fd)
{
union drm_amdgpu_ctx arg1;
union drm_amdgpu_wait_cs arg2;
arg1.in.op = AMDGPU_CTX_OP_ALLOC_CTX;
ret = drmIoctl(fd, 0x140106442 /* amdgpu_ctx_ioctl */, &arg1);
arg2.in.handle = 0x0;
arg2.in.timeout = 0x2000000000000;
arg2.in.ip_type = AMD_IP_VPE /* 0x9 */;
arg2->in.ip_instance = 0x0;
arg2.in.ring = 0x0;
arg2.in.ctx_id = arg1.out.alloc.ctx_id;
drmIoctl(fd, 0xc0206449 /* AMDGPU_WAIT_CS * /, &arg2);
}
The ioctl AMDGPU_WAIT_CS without previously submitted job could be assumed that
the error should be returned, but the following commit
|
||
|
Samuel Holland
|
ca5b0b717b |
irqchip/riscv-intc: Fix use of AIA interrupts 32-63 on riscv32
riscv_intc_custom_base is initialized to BITS_PER_LONG, so the second check passes even though AIA provides 64 interrupts. Adjust the condition to only check the custom range for interrupts outside the standard range, and adjust the standard range when AIA is available. Fixes: |
||
|
Daniel Golle
|
ea80e3ed09 |
net: ethernet: mtk_eth_soc: fix PPE hanging issue
A patch to resolve an issue was found in MediaTek's GPL-licensed SDK: In the mtk_ppe_stop() function, the PPE scan mode is not disabled before disabling the PPE. This can potentially lead to a hang during the process of disabling the PPE. Without this patch, the PPE may experience a hang during the reboot test. Link: |
||
|
Daniel Golle
|
f1b85ef15a |
net: mediatek: mtk_eth_soc: clear MAC_MCR_FORCE_LINK only when MAC is up
Clearing bit MAC_MCR_FORCE_LINK which forces the link down too early
can result in MAC ending up in a broken/blocked state.
Fix this by handling this bit in the .mac_link_up and .mac_link_down
calls instead of in .mac_finish.
Fixes:
|
||
|
Yang Li
|
d7ef570ae0 |
ACPI: PM: Improve kerneldoc comments for suspend and hibernation functions
This patch enhances the documentation for the ACPI power management functions related to system suspend and hibernation. This includes the use of kernel-doc style comments which provide developers with clearer guidance on the usage and expectations of these functions. Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Rafael J. Wysocki
|
11703c7611 |
ARM cpufreq updates for 6.9
- zero initialize a cpumask (Marek Szyprowski). - Boost support for scmi cpufreq driver (Sibi Sankar). -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEx73Crsp7f6M6scA70rkcPK6BEhwFAmXz4jQACgkQ0rkcPK6B EhyudA//TXts7AyJcdrxe0YqT02LnD1KApRgvdZZGd1/LE16STjyKzpyLZ5RgTQa 4lvrRrd/zKmxHFJU+WKh15zGiXNT3QvPXT2dZHM3ZzXxKKxvkzLIhpv81Q9d5y9b kEt8x9QQxCGBe5iXL0Dy1t0d4wJ3H/OqSxQmQluT6ge6ZPfb+C9NaxnR7rLaJlQf Yphvc9I4MBQdnnlYuYDfRzkmUSxi+oKudXbfKsVu2Qnirv/gi25ARmYlpvbA9Os5 EP+A47O6+nf9PGJGqB/R67Mzb2l21Mo2WvyshIEDMmBZ3dBVMvL1ZNcputie3gxx qNfyOyE61dGp+lCj7QYpUMLvSAROnJSlucEIa5kanGUTbIsrn/Xx+5BJjbzQT/0W O9wjgaskTP4CgUh79mqHm4DFWNp4RWxMpeRMDn9fPx3r4PrX9klWWNgFAch4NLWf BssbnzoP8PF1m8780ZmCk811/SpvTBT8AbGlH8faNmhLewLDRCrnXsxCg5KEh5P6 qfWDZihG0S6MuNgsSqS+Y5FsuYyLtrmiu1O7jviiN3FD0/3p3jVMRin9EOsVQY5i 4WVI9Rf/K3YrZvka6zqBU+di8l32HncoEtRJhCreL+N1dBfKU974yl+rw4Oxv3Qp wZJz5tjCdWQWntfpMmU6mP0to607yvmGIE7ajAAE3g8i3mDsSu4= =miRv -----END PGP SIGNATURE----- Merge tag 'cpufreq-arm-updates-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Merge more ARM cpufreq updates for 6.9 from Viresh Kumar: "- zero initialize a cpumask (Marek Szyprowski). - Boost support for scmi cpufreq driver (Sibi Sankar)." * tag 'cpufreq-arm-updates-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: scmi: Enable boost support firmware: arm_scmi: Add support for marking certain frequencies as turbo cpufreq: dt: always allocate zeroed cpumask |
||
|
Miquel Raynal
|
09888e973c |
Raw NAND
The main series brought is an update of the Broadcom support to support all BCMBCA SoCs and their specificity (ECC, write protection, configuration straps), plus a few misc fixes and changes in the main driver. Device tree updates are also part of this PR, initially because of a misunderstanding on my side. The STM32_FMC2 controller driver is also upgraded to properly support MP1 and MP25 SoCs. A new compatible is added for an Atmel flavor. Among all these feature changes, there is as well a load of continuous read related fixes, avoiding more corner conditions and clarifying the logic. Finally a few miscellaneous fixes are made to the core, the lpx32xx_mlc, fsl_lbc, Meson and Atmel controller driver, as well as final one in the Hynix vendor driver. SPI-NAND The ESMT support has been extended to match 5 bytes ID to avoid collisions. Winbond support on its side receives support for W25N04KV chips. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmXzgv4ACgkQJWrqGEe9 VoTwUAgAqwzuaAbhMuHABS2IJnn9KZHCo4f2goXhtrtRP2oDSgzsT8Yke2vfJTIx KBtjWRYdp5n8GRSmDmO1n/oNnKdjkzbOhP0ow8aZqhKYtjQ7O0xxd4gxQu3gCoVz ypWq3tpMkKH0MyD8d+HulFhldMmyGv5BqXeioLi2azeALCbpgVcGAHaMxUlRB/p3 iM3GtBr9hUbai6HlynnPsiAAmyUc1gvGGHJ8t2ShjaW5LzK7uBqJLhSVizfP8I6g N6l0C+KKwFmXlprtgMcg/HjW2QWKOyeqrhmgTzcJIHRiPjySnmfOVeHBLu6y+1wl MC3BC5kHNSmOfuU76/93LUQUwkWvUA== =TaNQ -----END PGP SIGNATURE----- Merge tag 'nand/for-6.9' into mtd/next Raw NAND The main series brought is an update of the Broadcom support to support all BCMBCA SoCs and their specificity (ECC, write protection, configuration straps), plus a few misc fixes and changes in the main driver. Device tree updates are also part of this PR, initially because of a misunderstanding on my side. The STM32_FMC2 controller driver is also upgraded to properly support MP1 and MP25 SoCs. A new compatible is added for an Atmel flavor. Among all these feature changes, there is as well a load of continuous read related fixes, avoiding more corner conditions and clarifying the logic. Finally a few miscellaneous fixes are made to the core, the lpx32xx_mlc, fsl_lbc, Meson and Atmel controller driver, as well as final one in the Hynix vendor driver. SPI-NAND The ESMT support has been extended to match 5 bytes ID to avoid collisions. Winbond support on its side receives support for W25N04KV chips. |
||
|
Paolo Bonzini
|
4781179012 |
selftests: kvm: remove meaningless assignments in Makefiles
$(shell ...) expands to the output of the command. It expands to the
empty string when the command does not print anything to stdout.
Hence, $(shell mkdir ...) is sufficient and does not need any
variable assignment in front of it.
Commit
|
||
|
Takashi Iwai
|
587d67fd92 |
ALSA: timer: Fix missing irq-disable at closing
The conversion to guard macro dropped the irq-disablement at closing
mistakenly, which may lead to a race. Fix it.
Fixes:
|
||
|
Jichi Zhang
|
9b714a59b7 |
ALSA: hda/realtek: Add quirk for Lenovo Yoga 9 14IMH9
The speakers on the Lenovo Yoga 9 14IMH9 are similar to previous generations such as the 14IAP7, and the bass speakers can be fixed using similar methods with one caveat: 14IMH9 uses CS35L41 amplifiers which need to be activated separately. Signed-off-by: Jichi Zhang <i@jichi.ca> Message-ID: <20240315081954.45470-3-i@jichi.ca> Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
|
Karolina Stolarek
|
f1a785101d
|
drm/tests: Build KMS helpers when DRM_KUNIT_TEST_HELPERS is enabled
Commit |
||
|
Aleksandr Burakov
|
bc87bb342f |
fbdev: viafb: fix typo in hw_bitblt_1 and hw_bitblt_2
There are some actions with value 'tmp' but 'dst_addr' is checked instead. It is obvious that a copy-paste error was made here and the value of variable 'tmp' should be checked here. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Aleksandr Burakov <a.burakov@rosalinux.ru> Signed-off-by: Helge Deller <deller@gmx.de> |
||
|
Michael Ellerman
|
974191720a |
fbdev: mb862xxfb: Fix defined but not used error
socrates_gc_mode is defined at the top-level but then only used inside
an #ifdef CONFIG_FB_MB862XX_LIME, leading to an error with some configs:
drivers/video/fbdev/mb862xx/mb862xxfbdrv.c:36:31: error: ‘socrates_gc_mode’ defined but not used
36 | static struct mb862xx_gc_mode socrates_gc_mode = {
Fix it by moving socrates_gc_mode inside that ifdef, immediately prior
to the only function where it's used.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Helge Deller <deller@gmx.de>
|
||
|
Li Zhijian
|
748c7ebac8 |
fbdev: uvesafb: Convert sprintf/snprintf to sysfs_emit
Per filesystems/sysfs.rst, show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. coccinelle complains that there are still a couple of functions that use snprintf(). Convert them to sysfs_emit(). sprintf() will be converted as weel if they have. Generally, this patch is generated by make coccicheck M=<path/to/file> MODE=patch \ COCCI=scripts/coccinelle/api/device_attr_show.cocci No functional change intended CC: Helge Deller <deller@gmx.de> CC: linux-fbdev@vger.kernel.org CC: dri-devel@lists.freedesktop.org Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Helge Deller <deller@gmx.de> |
||
|
Sibi Sankar
|
a8e949d41c |
cpufreq: scmi: Enable boost support
Certain platforms host a number of higher OPPs that are exclusive to CPUs within specific CPUfreq policies and not all CPUs within that CPUfreq policy are able to achieve those higher OPPs due to power constraints. These OPPs are marked as turbo in the freq_table and in the presence of such OPPs, let's enable boost by default. Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> |
||
|
Sibi Sankar
|
a897575e79 |
firmware: arm_scmi: Add support for marking certain frequencies as turbo
All opps above the sustained frequency are treated as turbo, so mark them accordingly. Suggested-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> |
||
|
Viresh Kumar
|
480c64ae1c | Merge branch 'opp/boost-data' into cpufreq/arm/linux-next | ||
|
Marek Szyprowski
|
d2399501c2 |
cpufreq: dt: always allocate zeroed cpumask
Commit |