Kalle Valo steps down after serving as the WiFi driver maintainer
for over a decade.
Current release - fix to a fix:
- vsock: orphan socket after transport release, avoid null-deref
- Bluetooth: L2CAP: fix corrupted list in hci_chan_del
Current release - regressions:
- eth: stmmac: correct Rx buffer layout when SPH is enabled
- rxrpc: fix alteration of headers whilst zerocopy pending
- eth: iavf: fix a locking bug in an error path
- s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
- Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
Current release - new code bugs:
- rxrpc: fix ipv6 path MTU discovery, only ipv4 worked
- pse-pd: fix deadlock in current limit functions
Previous releases - regressions:
- rtnetlink: fix netns refleak with rtnl_setlink()
- wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364 firmware
Previous releases - always broken:
- add missing RCU protection of struct net throughout the stack
- can: rockchip: bail out if skb cannot be allocated
- eth: ti: am65-cpsw: base XDP support fixes
Misc:
- ethtool: tsconfig: update the format of hwtstamp flags,
changes the uAPI but this uAPI was not in any release yet
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=7lE+
-----END PGP SIGNATURE-----
Merge tag 'net-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bluetooth.
Kalle Valo steps down after serving as the WiFi driver maintainer for
over a decade.
Current release - fix to a fix:
- vsock: orphan socket after transport release, avoid null-deref
- Bluetooth: L2CAP: fix corrupted list in hci_chan_del
Current release - regressions:
- eth:
- stmmac: correct Rx buffer layout when SPH is enabled
- iavf: fix a locking bug in an error path
- rxrpc: fix alteration of headers whilst zerocopy pending
- s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
- Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
Current release - new code bugs:
- rxrpc: fix ipv6 path MTU discovery, only ipv4 worked
- pse-pd: fix deadlock in current limit functions
Previous releases - regressions:
- rtnetlink: fix netns refleak with rtnl_setlink()
- wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364
firmware
Previous releases - always broken:
- add missing RCU protection of struct net throughout the stack
- can: rockchip: bail out if skb cannot be allocated
- eth: ti: am65-cpsw: base XDP support fixes
Misc:
- ethtool: tsconfig: update the format of hwtstamp flags, changes the
uAPI but this uAPI was not in any release yet"
* tag 'net-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
net: pse-pd: Fix deadlock in current limit functions
rxrpc: Fix ipv6 path MTU discovery
Reapply "net: skb: introduce and use a single page frag cache"
s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
mlxsw: Add return value check for mlxsw_sp_port_get_stats_raw()
ipv6: mcast: add RCU protection to mld_newpack()
team: better TEAM_OPTION_TYPE_STRING validation
Bluetooth: L2CAP: Fix corrupted list in hci_chan_del
Bluetooth: btintel_pcie: Fix a potential race condition
Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd
net: ethernet: ti: am65_cpsw: fix tx_cleanup for XDP case
net: ethernet: ti: am65-cpsw: fix RX & TX statistics for XDP_TX case
net: ethernet: ti: am65-cpsw: fix memleak in certain XDP cases
vsock/test: Add test for SO_LINGER null ptr deref
vsock: Orphan socket after transport release
MAINTAINERS: Add sctp headers to the general netdev entry
Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
iavf: Fix a locking bug in an error path
rxrpc: Fix alteration of headers whilst zerocopy pending
net: phylink: make configuring clock-stop dependent on MAC support
...
-----BEGIN PGP SIGNATURE-----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=0hI+
-----END PGP SIGNATURE-----
Merge tag 'for-6.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix stale page cache after race between readahead and direct IO write
- fix hole expansion when writing at an offset beyond EOF, the range
will not be zeroed
- use proper way to calculate offsets in folio ranges
* tag 'for-6.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix hole expansion when writing at an offset beyond EOF
btrfs: fix stale page cache after race between readahead and direct IO write
btrfs: fix two misuses of folio_shift()
- More fixes for going read-only: the previous fix was insufficient, but
with more work on ordering journal reclaim flushing (and a btree node
accounting fix so we don't split until we have to) the
tiering_replication test now consistently goes read-only in less than
a second.
- fix for fsck when we have reflink pointers to missing indirect
extents
- some transaction restart handling fixes from Alan; the "Pass
_orig_restart_count to trans_was_restarted" likely fixes some rare
undefined behaviour heisenbugs.
-----BEGIN PGP SIGNATURE-----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=qdkE
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2025-02-12' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Just small stuff.
As a general announcement, on disk format is now frozen in my master
branch - future on disk format changes will be optional, not required.
- More fixes for going read-only: the previous fix was insufficient,
but with more work on ordering journal reclaim flushing (and a
btree node accounting fix so we don't split until we have to) the
tiering_replication test now consistently goes read-only in less
than a second.
- fix for fsck when we have reflink pointers to missing indirect
extents
- some transaction restart handling fixes from Alan; the "Pass
_orig_restart_count to trans_was_restarted" likely fixes some rare
undefined behaviour heisenbugs"
* tag 'bcachefs-2025-02-12' of git://evilpiepirate.org/bcachefs:
bcachefs: Reuse transaction
bcachefs: Pass _orig_restart_count to trans_was_restarted
bcachefs: CONFIG_BCACHEFS_INJECT_TRANSACTION_RESTARTS
bcachefs: Fix want_new_bset() so we write until the end of the btree node
bcachefs: Split out journal pins by btree level
bcachefs: Fix use after free
bcachefs: Fix marking reflink pointers to missing indirect extents
If userspace creates vcpus, then a vgic, we end-up in a situation
where irqchip_in_kernel() will return true, but no private interrupt
has been allocated for these vcpus. This situation will continue
until userspace initialises the vgic, at which point we fix the
early vcpus. Should a vcpu run or be initialised in the interval,
bad things may happen.
An obvious solution is to move this fix-up phase to the point where
the vgic is created. This ensures that from that point onwards,
all vcpus have their private interrupts, as new vcpus will directly
allocate them.
With that, we have the invariant that when irqchip_in_kernel() is
true, all vcpus have their private interrupts.
Reported-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250212182558.2865232-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
We currently spit out a warning if making a timer interrupt pending
fails. But not only this is loud and easy to trigger from userspace,
we also fail to do anything useful with that information.
Dropping the warning is the easiest thing to do for now. We can
always add error reporting if we really want in the future.
Reported-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250212182558.2865232-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fix a deadlock in pse_pi_get_current_limit and pse_pi_set_current_limit
caused by consecutive mutex_lock calls. One in the function itself and
another in pse_pi_get_voltage.
Resolve the issue by using the unlocked version of pse_pi_get_voltage
instead.
Fixes: e0a5e2bba3 ("net: pse-pd: Use power limit at driver side instead of current limit")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250212151751.1515008-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rxrpc path MTU discovery currently only makes use of ICMPv4, but not
ICMPv6, which means that pmtud for IPv6 doesn't work correctly. Fix it to
check for ICMPv6 messages also.
Fixes: eeaedc5449 ("rxrpc: Implement path-MTU probing using padded PING ACKs (RFC8899)")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/3517283.1739359284@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When allocating guest stage-2 page-table pages at EL2, pKVM can consume
pages from the host-provided kvm_hyp_memcache. As pgtable.c expects
zeroed pages, guest_s2_zalloc_page() actively implements this zeroing
with a PAGE_SIZE memset. Unfortunately, we don't check the page
alignment of the host-provided address before doing so, which could
lead to the memset overrunning the page if the host was malicious.
Fix this by simply force-aligning all kvm_hyp_memcache allocations to
page boundaries.
Fixes: 60dfe093ec ("KVM: arm64: Instantiate guest stage-2 page-tables at EL2")
Reported-by: Ben Simner <ben.simner@cl.cam.ac.uk>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250213153615.3642515-1-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that EL2 has gained some early timer emulation, it accesses
the offsets pointed to by the timer structure, both of which
live in the KVM structure.
Of course, these are *kernel* pointers, so the dereferencing
of these pointers in non-kernel code must be itself be offset.
Given switch.h its own version of timer_get_offset() and use that
instead.
Fixes: b86fc215dc ("KVM: arm64: Handle counter access early in non-HYP context")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://lore.kernel.org/r/20250212173454.2864462-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
At the end of kvm_arch_vcpu_load_fp() we check that no bits are set in
SVCR. We only check this for protected mode despite this mattering
equally for non-protected mode, and the comment above this is confusing.
Remove the comment and simplify the check, moving from WARN_ON() to
WARN_ON_ONCE() to avoid spamming the log.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
In non-protected KVM modes, while the guest FPSIMD/SVE/SME state is live on the
CPU, the host's active SVE VL may differ from the guest's maximum SVE VL:
* For VHE hosts, when a VM uses NV, ZCR_EL2 contains a value constrained
by the guest hypervisor, which may be less than or equal to that
guest's maximum VL.
Note: in this case the value of ZCR_EL1 is immaterial due to E2H.
* For nVHE/hVHE hosts, ZCR_EL1 contains a value written by the guest,
which may be less than or greater than the guest's maximum VL.
Note: in this case hyp code traps host SVE usage and lazily restores
ZCR_EL2 to the host's maximum VL, which may be greater than the
guest's maximum VL.
This can be the case between exiting a guest and kvm_arch_vcpu_put_fp().
If a softirq is taken during this period and the softirq handler tries
to use kernel-mode NEON, then the kernel will fail to save the guest's
FPSIMD/SVE state, and will pend a SIGKILL for the current thread.
This happens because kvm_arch_vcpu_ctxsync_fp() binds the guest's live
FPSIMD/SVE state with the guest's maximum SVE VL, and
fpsimd_save_user_state() verifies that the live SVE VL is as expected
before attempting to save the register state:
| if (WARN_ON(sve_get_vl() != vl)) {
| force_signal_inject(SIGKILL, SI_KERNEL, 0, 0);
| return;
| }
Fix this and make this a bit easier to reason about by always eagerly
switching ZCR_EL{1,2} at hyp during guest<->host transitions. With this
happening, there's no need to trap host SVE usage, and the nVHE/nVHE
__deactivate_cptr_traps() logic can be simplified to enable host access
to all present FPSIMD/SVE/SME features.
In protected nVHE/hVHE modes, the host's state is always saved/restored
by hyp, and the guest's state is saved prior to exit to the host, so
from the host's PoV the guest never has live FPSIMD/SVE/SME state, and
the host's ZCR_EL1 is never clobbered by hyp.
Fixes: 8c8010d69c ("KVM: arm64: Save/restore SVE state for nVHE")
Fixes: 2e3cf82063 ("KVM: arm64: nv: Ensure correct VL is loaded before saving SVE state")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-9-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The shared hyp switch header has a number of static functions which
might not be used by all files that include the header, and when unused
they will provoke compiler warnings, e.g.
| In file included from arch/arm64/kvm/hyp/nvhe/hyp-main.c:8:
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:703:13: warning: 'kvm_hyp_handle_dabt_low' defined but not used [-Wunused-function]
| 703 | static bool kvm_hyp_handle_dabt_low(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:682:13: warning: 'kvm_hyp_handle_cp15_32' defined but not used [-Wunused-function]
| 682 | static bool kvm_hyp_handle_cp15_32(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:662:13: warning: 'kvm_hyp_handle_sysreg' defined but not used [-Wunused-function]
| 662 | static bool kvm_hyp_handle_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:458:13: warning: 'kvm_hyp_handle_fpsimd' defined but not used [-Wunused-function]
| 458 | static bool kvm_hyp_handle_fpsimd(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:329:13: warning: 'kvm_hyp_handle_mops' defined but not used [-Wunused-function]
| 329 | static bool kvm_hyp_handle_mops(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~
Mark these functions as 'inline' to suppress this warning. This
shouldn't result in any functional change.
At the same time, avoid the use of __alias() in the header and alias
kvm_hyp_handle_iabt_low() and kvm_hyp_handle_watchpt_low() to
kvm_hyp_handle_memory_fault() using CPP, matching the style in the rest
of the kernel. For consistency, kvm_hyp_handle_memory_fault() is also
marked as 'inline'.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-8-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The hyp exit handling logic is largely shared between VHE and nVHE/hVHE,
with common logic in arch/arm64/kvm/hyp/include/hyp/switch.h. The code
in the header depends on function definitions provided by
arch/arm64/kvm/hyp/vhe/switch.c and arch/arm64/kvm/hyp/nvhe/switch.c
when they include the header.
This is an unusual header dependency, and prevents the use of
arch/arm64/kvm/hyp/include/hyp/switch.h in other files as this would
result in compiler warnings regarding missing definitions, e.g.
| In file included from arch/arm64/kvm/hyp/nvhe/hyp-main.c:8:
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:733:31: warning: 'kvm_get_exit_handler_array' used but never defined
| 733 | static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu);
| | ^~~~~~~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:735:13: warning: 'early_exit_filter' used but never defined
| 735 | static void early_exit_filter(struct kvm_vcpu *vcpu, u64 *exit_code);
| | ^~~~~~~~~~~~~~~~~
Refactor the logic such that the header doesn't depend on anything from
the C files. There should be no functional change as a result of this
patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-7-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
For historical reasons, the VHE and nVHE/hVHE implementations of
__activate_cptr_traps() pair with a common implementation of
__kvm_reset_cptr_el2(), which ideally would be named
__deactivate_cptr_traps().
Rename __kvm_reset_cptr_el2() to __deactivate_cptr_traps(), and split it
into separate VHE and nVHE/hVHE variants so that each can be paired with
its corresponding implementation of __activate_cptr_traps().
At the same time, fold kvm_write_cptr_el2() into its callers. This
makes it clear in-context whether a write is made to the CPACR_EL1
encoding or the CPTR_EL2 encoding, and removes the possibility of
confusion as to whether kvm_write_cptr_el2() reformats the sysreg fields
as cpacr_clear_set() does.
In the nVHE/hVHE implementation of __activate_cptr_traps(), placing the
sysreg writes within the if-else blocks requires that the call to
__activate_traps_fpsimd32() is moved earlier, but as this was always
called before writing to CPTR_EL2/CPACR_EL1, this should not result in a
functional change.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-6-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
When KVM is in VHE mode, the host kernel tries to save and restore the
configuration of CPACR_EL1.SMEN (i.e. CPTR_EL2.SMEN when HCR_EL2.E2H=1)
across kvm_arch_vcpu_load_fp() and kvm_arch_vcpu_put_fp(), since the
configuration may be clobbered by hyp when running a vCPU. This logic
has historically been broken, and is currently redundant.
This logic was originally introduced in commit:
861262ab86 ("KVM: arm64: Handle SME host state when running guests")
At the time, the VHE hyp code would reset CPTR_EL2.SMEN to 0b00 when
returning to the host, trapping host access to SME state. Unfortunately,
this was unsafe as the host could take a softirq before calling
kvm_arch_vcpu_put_fp(), and if a softirq handler were to use kernel mode
NEON the resulting attempt to save the live FPSIMD/SVE/SME state would
result in a fatal trap.
That issue was limited to VHE mode. For nVHE/hVHE modes, KVM always
saved/restored the host kernel's CPACR_EL1 value, and configured
CPTR_EL2.TSM to 0b0, ensuring that host usage of SME would not be
trapped.
The issue above was incidentally fixed by commit:
375110ab51 ("KVM: arm64: Fix resetting SME trap values on reset for (h)VHE")
That commit changed the VHE hyp code to configure CPTR_EL2.SMEN to 0b01
when returning to the host, permitting host kernel usage of SME,
avoiding the issue described above. At the time, this was not identified
as a fix for commit 861262ab86.
Now that the host eagerly saves and unbinds its own FPSIMD/SVE/SME
state, there's no need to save/restore the state of the EL0 SME trap.
The kernel can safely save/restore state without trapping, as described
above, and will restore userspace state (including trap controls) before
returning to userspace.
Remove the redundant logic.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-5-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
When KVM is in VHE mode, the host kernel tries to save and restore the
configuration of CPACR_EL1.ZEN (i.e. CPTR_EL2.ZEN when HCR_EL2.E2H=1)
across kvm_arch_vcpu_load_fp() and kvm_arch_vcpu_put_fp(), since the
configuration may be clobbered by hyp when running a vCPU. This logic is
currently redundant.
The VHE hyp code unconditionally configures CPTR_EL2.ZEN to 0b01 when
returning to the host, permitting host kernel usage of SVE.
Now that the host eagerly saves and unbinds its own FPSIMD/SVE/SME
state, there's no need to save/restore the state of the EL0 SVE trap.
The kernel can safely save/restore state without trapping, as described
above, and will restore userspace state (including trap controls) before
returning to userspace.
Remove the redundant logic.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-4-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that the host eagerly saves its own FPSIMD/SVE/SME state,
non-protected KVM never needs to save the host FPSIMD/SVE/SME state,
and the code to do this is never used. Protected KVM still needs to
save/restore the host FPSIMD/SVE state to avoid leaking guest state to
the host (and to avoid revealing to the host whether the guest used
FPSIMD/SVE/SME), and that code needs to be retained.
Remove the unused code and data structures.
To avoid the need for a stub copy of kvm_hyp_save_fpsimd_host() in the
VHE hyp code, the nVHE/hVHE version is moved into the shared switch
header, where it is only invoked when KVM is in protected mode.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-3-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
There are several problems with the way hyp code lazily saves the host's
FPSIMD/SVE state, including:
* Host SVE being discarded unexpectedly due to inconsistent
configuration of TIF_SVE and CPACR_ELx.ZEN. This has been seen to
result in QEMU crashes where SVE is used by memmove(), as reported by
Eric Auger:
https://issues.redhat.com/browse/RHEL-68997
* Host SVE state is discarded *after* modification by ptrace, which was an
unintentional ptrace ABI change introduced with lazy discarding of SVE state.
* The host FPMR value can be discarded when running a non-protected VM,
where FPMR support is not exposed to a VM, and that VM uses
FPSIMD/SVE. In these cases the hyp code does not save the host's FPMR
before unbinding the host's FPSIMD/SVE/SME state, leaving a stale
value in memory.
Avoid these by eagerly saving and "flushing" the host's FPSIMD/SVE/SME
state when loading a vCPU such that KVM does not need to save any of the
host's FPSIMD/SVE/SME state. For clarity, fpsimd_kvm_prepare() is
removed and the necessary call to fpsimd_save_and_flush_cpu_state() is
placed in kvm_arch_vcpu_load_fp(). As 'fpsimd_state' and 'fpmr_ptr'
should not be used, they are set to NULL; all uses of these will be
removed in subsequent patches.
Historical problems go back at least as far as v5.17, e.g. erroneous
assumptions about TIF_SVE being clear in commit:
8383741ab2 ("KVM: arm64: Get rid of host SVE tracking/saving")
... and so this eager save+flush probably needs to be backported to ALL
stable trees.
Fixes: 93ae6b01ba ("KVM: arm64: Discard any SVE state when entering KVM guests")
Fixes: 8c845e2731 ("arm64/sve: Leave SVE enabled on syscall if we don't context switch")
Fixes: ef3be86021 ("KVM: arm64: Add save/restore support for FPMR")
Reported-by: Eric Auger <eauger@redhat.com>
Reported-by: Wilco Dijkstra <wilco.dijkstra@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-2-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The gpiochip_get_ngpios() uses chip_*() macros to print messages.
However these macros rely on gpiodev to be initialised and set,
which is not the case when called via bgpio_init(). In such a case
the printing messages will crash on NULL pointer dereference.
Replace chip_*() macros by the respective dev_*() ones to avoid
such crash.
Fixes: 55b2395e4e ("gpio: mmio: handle "ngpios" properly in bgpio_init()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250213155646.2882324-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-----BEGIN PGP SIGNATURE-----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=ZZ4N
-----END PGP SIGNATURE-----
Merge tag 'nf-25-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains one revert for:
1) Revert flowtable entry teardown cycle when skbuff exceeds mtu to
deal with DF flag unset scenarios. This is reverts a patch coming
in the previous merge window (available in 6.14-rc releases).
* tag 'nf-25-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
====================
Link: https://patch.msgid.link/20250213100502.3983-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
queue_limits_cancel_update() must only be called if
queue_limits_start_update() is called first. Remove the
queue_limits_cancel_update() calls from the raid*_set_limits() functions
because there is no corresponding queue_limits_start_update() call.
Cc: Christoph Hellwig <hch@lst.de>
Fixes: c6e56cf6b2 ("block: move integrity information into queue_limits")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-raid/20250212171108.3483150-1-bvanassche@acm.org/
Signed-off-by: Yu Kuai <yukuai@kernel.org>
This isn't generally necessary, but conditions have been observed where
SQE data is accessed from the original SQE after prep has been done and
outside of the initial issue. Opcode prep handlers must ensure that any
SQE related data is stable beyond the prep phase, but uring_cmd is a bit
special in how it handles the SQE which makes it susceptible to reading
stale data. If the application has reused the SQE before the original
completes, then that can lead to data corruption.
Down the line we can relax this again once uring_cmd has been sanitized
a bit, and avoid unnecessarily copying the SQE.
Fixes: 5eff57fa9f ("io_uring/uring_cmd: defer SQE copying until it's needed")
Reported-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use DRM's device wedged event to notify userspace that a reset had
happened. For now, only use `none` method meant for telemetry
capture.
In the future we might want to report a recovery method if the reset didn't
succeed.
Acked-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204070528.1919158-6-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Now that we have device wedged event provided by DRM core, make use
of it and support both driver rebind and bus-reset based recovery.
With this in place, userspace will be notified of wedged device on
gt reset failure.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204070528.1919158-5-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This was previously attempted as xe specific reset uevent but dropped
in commit 77a0d4d1ce ("drm/xe/uapi: Remove reset uevent for now")
as part of refactoring.
Now that we have device wedged event provided by DRM core, make use
of it and support both driver rebind and bus-reset based recovery.
With this in place userspace will be notified of wedged device, on
the basis of which, userspace may take respective action to recover
the device.
$ udevadm monitor --property --kernel
monitor will print the received events for:
KERNEL - the kernel uevent
KERNEL[265.802982] change /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:01.0/0000:03:00.0/drm/card0 (drm)
ACTION=change
DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:01.0/0000:03:00.0/drm/card0
SUBSYSTEM=drm
WEDGED=rebind,bus-reset
DEVNAME=/dev/dri/card0
DEVTYPE=drm_minor
SEQNUM=5208
MAJOR=226
MINOR=0
v2: Change authorship to Himal (Aravind)
Add uevent for all device wedged cases (Aravind)
v3: Generic implementation in DRM subsystem (Lucas)
v4: Change authorship to Raag (Aravind)
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204070528.1919158-4-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Introduce device wedged event, which notifies userspace of 'wedged'
(hanged/unusable) state of the DRM device through a uevent. This is
useful especially in cases where the device is no longer operating as
expected and has become unrecoverable from driver context. Purpose of
this implementation is to provide drivers a generic way to recover the
device with the help of userspace intervention without taking any drastic
measures (like resetting or re-enumerating the full bus, on which the
underlying physical device is sitting) in the driver.
A 'wedged' device is basically a device that is declared dead by the
driver after exhausting all possible attempts to recover it from driver
context. The uevent is the notification that is sent to userspace along
with a hint about what could possibly be attempted to recover the device
from userspace and bring it back to usable state. Different drivers may
have different ideas of a 'wedged' device depending on hardware
implementation of the underlying physical device, and hence the vendor
agnostic nature of the event. It is up to the drivers to decide when they
see the need for device recovery and how they want to recover from the
available methods.
Driver prerequisites
--------------------
The driver, before opting for recovery, needs to make sure that the
'wedged' device doesn't harm the system as a whole by taking care of the
prerequisites. Necessary actions must include disabling DMA to system
memory as well as any communication channels with other devices. Further,
the driver must ensure that all dma_fences are signalled and any device
state that the core kernel might depend on is cleaned up. All existing
mmaps should be invalidated and page faults should be redirected to a
dummy page. Once the event is sent, the device must be kept in 'wedged'
state until the recovery is performed. New accesses to the device
(IOCTLs) should be rejected, preferably with an error code that resembles
the type of failure the device has encountered. This will signify the
reason for wedging, which can be reported to the application if needed.
Recovery
--------
Current implementation defines three recovery methods, out of which,
drivers can use any one, multiple or none. Method(s) of choice will be
sent in the uevent environment as ``WEDGED=<method1>[,..,<methodN>]`` in
order of less to more side-effects. If driver is unsure about recovery
or method is unknown (like soft/hard system reboot, firmware flashing,
physical device replacement or any other procedure which can't be
attempted on the fly), ``WEDGED=unknown`` will be sent instead.
Userspace consumers can parse this event and attempt recovery as per the
following expectations.
=============== ========================================
Recovery method Consumer expectations
=============== ========================================
none optional telemetry collection
rebind unbind + bind driver
bus-reset unbind + bus reset/re-enumeration + bind
unknown consumer policy
=============== ========================================
The only exception to this is ``WEDGED=none``, which signifies that the
device was temporarily 'wedged' at some point but was recovered from driver
context using device specific methods like reset. No explicit recovery is
expected from the consumer in this case, but it can still take additional
steps like gathering telemetry information (devcoredump, syslog). This is
useful because the first hang is usually the most critical one which can
result in consequential hangs or complete wedging.
Consumer prerequisites
----------------------
It is the responsibility of the consumer to make sure that the device or
its resources are not in use by any process before attempting recovery.
With IOCTLs erroring out, all device memory should be unmapped and file
descriptors should be closed to prevent leaks or undefined behaviour. The
idea here is to clear the device of all user context beforehand and set
the stage for a clean recovery.
Example
-------
Udev rule::
SUBSYSTEM=="drm", ENV{WEDGED}=="rebind", DEVPATH=="*/drm/card[0-9]",
RUN+="/path/to/rebind.sh $env{DEVPATH}"
Recovery script::
#!/bin/sh
DEVPATH=$(readlink -f /sys/$1/device)
DEVICE=$(basename $DEVPATH)
DRIVER=$(readlink -f $DEVPATH/driver)
echo -n $DEVICE > $DRIVER/unbind
echo -n $DEVICE > $DRIVER/bind
Customization
-------------
Although basic recovery is possible with a simple script, consumers can
define custom policies around recovery. For example, if the driver supports
multiple recovery methods, consumers can opt for the suitable one depending
on scenarios like repeat offences or vendor specific failures. Consumers
can also choose to have the device available for debugging or telemetry
collection and base their recovery decision on the findings. This is useful
especially when the driver is unsure about recovery or method is unknown.
v4: s/drm_dev_wedged/drm_dev_wedged_event
Use drm_info() (Jani)
Kernel doc adjustment (Aravind)
v5: Send recovery method with uevent (Lina)
v6: Access wedge_recovery_opts[] using helper function (Jani)
Use snprintf() (Jani)
v7: Convert recovery helpers into regular functions (Andy, Jani)
Aesthetic adjustments (Andy)
Handle invalid recovery method
v8: Allow sending multiple methods with uevent (Lucas, Michal)
static_assert() globally (Andy)
v9: Provide 'none' method for device reset (Christian)
Provide recovery opts using switch cases
v11: Log device reset (André)
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204070528.1919158-2-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Now when we use scx_bpf_task_cgroup() in ops.tick() to get the cgroup of
the current task, the following error will occur:
scx_foo[3795244] triggered exit kind 1024:
runtime error (called on a task not being operated on)
The reason is that we are using SCX_CALL_OP() instead of SCX_CALL_OP_TASK()
when calling ops.tick(), which triggers the error during the subsequent
scx_kf_allowed_on_arg_tasks() check.
SCX_CALL_OP_TASK() was first introduced in commit 36454023f5 ("sched_ext:
Track tasks that are subjects of the in-flight SCX operation") to ensure
task's rq lock is held when accessing task's sched_group. Since ops.tick()
is marked as SCX_KF_TERMINAL and task_tick_scx() is protected by the rq
lock, we can use SCX_CALL_OP_TASK() to avoid the above issue. Similarly,
the same changes should be made for ops.disable() and ops.exit_task(), as
they are also protected by task_rq_lock() and it's safe to access the
task's task_group.
Fixes: 36454023f5 ("sched_ext: Track tasks that are subjects of the in-flight SCX operation")
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This reverts commit 011b033590.
Sabrina reports that the revert may trigger warnings due to intervening
changes, especially the ability to rise MAX_SKB_FRAGS. Let's drop it
and revisit once that part is also ironed out.
Fixes: 011b033590 ("Revert "net: skb: introduce and use a single page frag cache"")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/6bf54579233038bc0e76056c5ea459872ce362ab.1739375933.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now BPF only supports bpf_list_push_{front,back}_impl kfunc, not bpf_list_
push_{front,back}.
This patch fix this issue. Without this patch, if we use bpf_list kfunc
in scx, the BPF verifier would complain:
libbpf: extern (func ksym) 'bpf_list_push_back': not found in kernel or
module BTFs
libbpf: failed to load object 'scx_foo'
libbpf: failed to load BPF skeleton 'scx_foo': -EINVAL
With this patch, the bpf list kfunc will work as expected.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Fixes: 2a52ca7c98 ("sched_ext: Add scx_simple and scx_example_qmap example schedulers")
Signed-off-by: Tejun Heo <tj@kernel.org>
In jadard_prepare() a reset pulse is generated with the following
statements (delays ommited for clarity):
gpiod_set_value(jadard->reset, 1); --> Deassert reset
gpiod_set_value(jadard->reset, 0); --> Assert reset for 10ms
gpiod_set_value(jadard->reset, 1); --> Deassert reset
However, specifying second argument of "0" to gpiod_set_value() means to
deassert the GPIO, and "1" means to assert it. If the reset signal is
defined as GPIO_ACTIVE_LOW in the DTS, the above statements will
incorrectly generate the reset pulse (inverted) and leave it asserted
(LOW) at the end of jadard_prepare().
Fix reset behavior by inverting gpiod_set_value() second argument
in jadard_prepare(). Also modify second argument to devm_gpiod_get()
in jadard_dsi_probe() to assert the reset when probing.
Do not modify it in jadard_unprepare() as it is already properly
asserted with "1", which seems to be the intended behavior.
Fixes: 6b818c533d ("drm: panel: Add Jadard JD9365DA-H3 DSI panel")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240927135306.857617-1-hugo@hugovil.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927135306.857617-1-hugo@hugovil.com
-----BEGIN PGP SIGNATURE-----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=O6uZ
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix bugs about idle, kernel_page_present(), IP checksum and KVM, plus
some trival cleanups"
* tag 'loongarch-fixes-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Set host with kernel mode when switch to VM mode
LoongArch: KVM: Remove duplicated cache attribute setting
LoongArch: KVM: Fix typo issue about GCFG feature detection
LoongArch: csum: Fix OoB access in IP checksum code for negative lengths
LoongArch: Remove the deprecated notifier hook mechanism
LoongArch: Use str_yes_no() helper function for /proc/cpuinfo
LoongArch: Fix kernel_page_present() for KPRANGE/XKPRANGE
LoongArch: Fix idle VS timer enqueue
Fixes and new HW support:
- thinkpad_acpi:
- Fix registration of tpacpi platform driver
- Support fan speed in ticks per revolution (Thinkpad X120e)
- Support V9 DYTC profiles (new Thinkpad AMD platforms)
- int3472: Handle GPIO "enable" vs "reset" variation (ov7251)
The following is an automated shortlog grouped by driver:
int3472:
- Call "reset" GPIO "enable" for INT347E
- Use correct type for "polarity", call it gpio_flags
thinkpad_acpi:
- Fix invalid fan speed on ThinkPad X120e
- Fix registration of tpacpi platform driver
- Support for V9 DYTC platform profiles
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ63igAAKCRBZrE9hU+XO
MW/TAQDbeIrh8Oy17XBXVYUMcLhuyQNGXQLQntMzxPzCL+aL7AD/T39y8bZFWlYg
lEvrv4B/YOjCZyfcst8lR7RrcMFo/Qs=
=olZn
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- thinkpad_acpi:
- Fix registration of tpacpi platform driver
- Support fan speed in ticks per revolution (Thinkpad X120e)
- Support V9 DYTC profiles (new Thinkpad AMD platforms)
- int3472: Handle GPIO "enable" vs "reset" variation (ov7251)
* tag 'platform-drivers-x86-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Fix registration of tpacpi platform driver
platform/x86: int3472: Call "reset" GPIO "enable" for INT347E
platform/x86: int3472: Use correct type for "polarity", call it gpio_flags
platform/x86: thinkpad_acpi: Support for V9 DYTC platform profiles
platform/x86: thinkpad_acpi: Fix invalid fan speed on ThinkPad X120e
Add a check for the return value of mlxsw_sp_port_get_stats_raw()
in __mlxsw_sp_port_get_stats(). If mlxsw_sp_port_get_stats_raw()
returns an error, exit the function to prevent further processing
with potentially invalid data.
Fixes: 614d509aa1 ("mlxsw: Move ethtool_ops to spectrum_ethtool.c")
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250212152311.1332-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mld_newpack() can be called without RTNL or RCU being held.
Note that we no longer can use sock_alloc_send_skb() because
ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep.
Instead use alloc_skb() and charge the net->ipv6.igmp_sk
socket under RCU protection.
Fixes: b8ad0cbc58 ("[NETNS][IPV6] mcast - handle several network namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250212141021.1663666-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On HCI_OP_RESET command, firmware raises alive interrupt. Driver needs
to wait for this before sending other command. This patch fixes the potential
miss of alive interrupt due to which HCI_OP_RESET can timeout.
Expected flow:
If tx command is HCI_OP_RESET,
1. set data->gp0_received = false
2. send HCI_OP_RESET
3. wait for alive interrupt
Actual flow having potential race:
If tx command is HCI_OP_RESET,
1. send HCI_OP_RESET
1a. Firmware raises alive interrupt here and in ISR
data->gp0_received is set to true
2. set data->gp0_received = false
3. wait for alive interrupt
Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: 05c200c8f0 ("Bluetooth: btintel_pcie: Add handshake between driver and firmware")
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Closes: https://patchwork.kernel.org/project/bluetooth/patch/20241001104451.626964-1-kiran.k@intel.com/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces a module for working with faux devices in rust, along with
adding sample code to show how the API is used. Unlike other types of
devices, we don't provide any hooks for device probe/removal - since these
are optional for the faux API and are unnecessary in rust.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Maíra Canal <mairacanal@riseup.net>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/2025021026-exert-accent-b4c6@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many drivers abuse the platform driver/bus system as it provides a
simple way to create and bind a device to a driver-specific set of
probe/release functions. Instead of doing that, and wasting all of the
memory associated with a platform device, here is a "faux" bus that
can be used instead.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/2025021026-atlantic-gibberish-3f0c@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Switch to use my kernel.org address for I2C ACPI work.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The conditions for whether or not a request is allowed adding to a
completion batch are a bit hard to read, and they also have a few
issues. One is that ioerror may indeed be a random value on passthrough,
and it's being checked unconditionally of whether or not the given
request is a passthrough request or not.
Rewrite the conditions to be separate for easier reading, and only check
ioerror for non-passthrough requests. This fixes an issue with bio
unmapping on passthrough, where it fails getting added to a batch. This
both leads to suboptimal performance, and may trigger a potential
schedule-under-atomic condition for polled passthrough IO.
Fixes: f794f3351f ("block: add support for blk_mq_end_request_batch()")
Link: https://lore.kernel.org/r/20575f0a-656e-4bb3-9d82-dec6c7e3a35c@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In some cases observed during ESD tests, the TI SN65DSI83 cannot recover
from errors by itself. A full restart of the bridge is needed in those
cases to have the bridge output LVDS signals again.
Also, during tests, cases were observed where reading the status of the
bridge was not even possible. Indeed, in those cases, the bridge stops
to acknowledge I2C transactions. Only a full reset of the bridge (power
off/on) brings back the bridge to a functional state.
The TI SN65DSI83 has some error detection capabilities. Introduce an
error recovery mechanism based on this detection.
The errors detected are signaled through an interrupt. On system where
this interrupt is not available, the driver uses a polling monitoring
fallback to check for errors. When an error is present or when reading
the bridge status leads to an I2C failure, the recovery process is
launched.
Restarting the bridge needs to redo the initialization sequence. This
initialization sequence has to be done with the DSI data lanes driven in
LP11 state. In order to do that, the recovery process resets the whole
output path (i.e the path from the encoder to the connector) where the
bridge is located.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210132620.42263-5-herve.codina@bootlin.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The current code uses a the reset_pipe() local function to reset the
CRTC outputs.
drm_atomic_helper_reset_crtc() has been introduced recently and it
performs exact same operations.
In order to avoid code duplication, use the new helper instead of the
local function.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210132620.42263-4-herve.codina@bootlin.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_atomic_helper_reset_crtc() allows to reset the CRTC active outputs.
This resets all active components available between the CRTC and
connectors.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210132620.42263-3-herve.codina@bootlin.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Both the TI SN65DSI83 and SN65DSI84 bridges have an IRQ pin to signal
errors using interrupt.
This interrupt is not documented in the binding.
Add the missing interrupts property.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210132620.42263-2-herve.codina@bootlin.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
