Pull scsi-target changes from Nicholas Bellinger:
"There has been lots of work in existing code in a number of areas this
past cycle. The major highlights have been:
* Removal of transport_do_task_sg_chain() from core + fabrics
(Roland)
* target-core: Removal of se_task abstraction from target-core and
enforce hw_max_sectors for pSCSI backends (hch)
* Re-factoring of iscsi-target tx immediate/response queues (agrover)
* Conversion of iscsi-target back to using target core memory
allocation logic (agrover)
We've had one last minute iscsi-target patch go into for-next to
address a nasty regression bug related to the target core allocation
logic conversion from agrover that is not included in friday's
linux-next build, but has been included in this series.
On the new fabric module code front for-3.5, here is a brief status
update for the three currently in flight this round:
* usb-gadget target driver:
Sebastian Siewior's driver for supporting usb-gadget target mode
operation. This will be going out as a separate PULL request from
target-pending/usb-target-merge with subsystem maintainer ACKs. There
is one minor target-core patch in this series required to function.
* sbp ieee-1394/firewire target driver:
Chris Boot's driver for supportting the Serial Block Protocol (SBP)
across IEEE-1394 Firewire hardware. This will be going out as a
separate PULL request from target-pending/sbp-target-merge with two
additional drivers/firewire/ patches w/ subsystem maintainer ACKs.
* qla2xxx LLD target mode infrastructure changes + tcm_qla2xxx:
The Qlogic >= 24xx series HW target mode LLD infrastructure patch-set
and tcm_qla2xxx fabric driver. Support for FC target mode using
qla2xxx LLD code has been officially submitted by Qlogic to James
below, and is currently outstanding but not yet merged into
scsi.git/for-next..
[PATCH 00/22] qla2xxx: Updates for scsi "misc" branch
http://www.spinics.net/lists/linux-scsi/msg59350.html
Note there are *zero* direct dependencies upon this for-next series
for the qla2xxx LLD target + tcm_qla2xxx patches submitted above, and
over the last days the target mode team has been tracking down an
tcm_qla2xxx specific active I/O shutdown bug that appears to now be
almost squashed for 3.5-rc-fixes."
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (47 commits)
iscsi-target: Fix iov_count calculation bug in iscsit_allocate_iovecs
iscsi-target: remove dead code in iscsi_check_valuelist_for_support
target: Handle ATA_16 passthrough for pSCSI backend devices
target: Add MI_REPORT_TARGET_PGS ext. header + implict_trans_secs attribute
target: Fix MAINTENANCE_IN service action CDB checks to use lower 5 bits
target: add support for the WRITE_VERIFY command
target: make target_put_session void
target: cleanup transport_execute_tasks()
target: Remove max_sectors device attribute for modern se_task less code
target: lock => unlock typo in transport_lun_wait_for_tasks
target: Enforce hw_max_sectors for SCF_SCSI_DATA_SG_IO_CDB
target: remove the t_se_count field in struct se_cmd
target: remove the t_task_cdbs_ex_left field in struct se_cmd
target: remove the t_task_cdbs_left field in struct se_cmd
target: remove struct se_task
target: move the state and execute lists to the command
target: simplify command to task linkage
target: always allocate a single task
target: replace ->execute_task with ->execute_cmd
target: remove the task_sectors field in struct se_task
...
- Generic Device Tree bindings and hooks for drivers so we can
move over modern drivers to using this.
- Device Tree bindings for Tegra SoCs.
- Funneling some devicetree helper code for the drivers/of
subsystem.
- New pin control drivers for:
- Freescale MXS
- Freescale i.MX51
- Freescale i.MX53
- All of these use Device Tree bindings.
- Dummy pinctrl handles for stepwise migration to pinctrl, akin
to dummy regulators.
- Minor non-urgent fixes and improvments.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=RgIp
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control subsystem changes from Linus Walleij:
- Generic Device Tree bindings and hooks for drivers so we can move
over modern drivers to using this.
- Device Tree bindings for Tegra SoCs.
- Funneling some devicetree helper code for the drivers/of subsystem.
- New pin control drivers for:
* Freescale MXS
* Freescale i.MX51
* Freescale i.MX53
All of these use Device Tree bindings.
- Dummy pinctrl handles for stepwise migration to pinctrl, akin to
dummy regulators.
- Minor non-urgent fixes and improvments.
Fix up trivial conflicts in Documentation/driver-model/devres.txt and
drivers/pinctrl/core.c,
* tag 'pinctrl-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (46 commits)
pinctrl: pinctrl-imx: add imx51 pinctrl driver
pinctrl: pinctrl-imx: add imx53 pinctrl driver
pinctrl: pinctrl-pxa3xx: remove empty pinmux disable function
pinctrl: pinctrl-mxs: remove empty pinmux disable function
pinctrl: pinctrl-imx: remove empty pinmux disable function
pinctrl: make pinmux disable function optional
pinctrl: a minor error checking improvement for pinconf
pinctrl: mxs: skip gpio nodes for group creation
pinctrl: mxs: create group for pin config node
pinctrl: (cosmetic) fix two entries in DocBook comments
pinctrl: add more info to error msgs in pin_request
pinctrl: add pinctrl-mxs support
pinctrl: pinctrl-imx: add imx6q pinctrl driver
pinctrl: pinctrl-imx: add imx pinctrl core driver
dt: add of_get_child_count helper function
pinctrl: support gpio request deferred probing
pinctrl: add pinctrl_provide_dummies interface for platforms to use
pinctrl: enhance reporting of errors when loading from DT
pinctrl: add kerneldoc for pinctrl_ops device tree functions
pinctrl: propagate map validation errors
...
The major thing here is the addition of some helpers to factor code out
of drivers, making a fair proportion of regulators much more just data
rather than code which is nice.
- Helpers in the core for regulators using regmap, providing generic
implementations of the enable and voltage selection operations which
just need data to describe them in the drivers.
- Split out voltage mapping and voltage setting, allowing many more
drivers to take advantage of the infrastructure for selectors.
- Loads and loads of cleanups from Axel Lin once again, including many
changes to take advantage of the above new framework features
- New drivers for Ricoh RC5T583, TI TPS62362, TI TPS62363, TI TPS65913,
TI TWL6035 and TI TWL6037.
Some of the registration changes to support the core refactoring caused
so many conflicts that eventually topic branches were abandoned for this
release.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=UR7s
-----END PGP SIGNATURE-----
Merge tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The major thing here is the addition of some helpers to factor code
out of drivers, making a fair proportion of regulators much more just
data rather than code which is nice.
- Helpers in the core for regulators using regmap, providing generic
implementations of the enable and voltage selection operations which
just need data to describe them in the drivers.
- Split out voltage mapping and voltage setting, allowing many more
drivers to take advantage of the infrastructure for selectors.
- Loads and loads of cleanups from Axel Lin once again, including many
changes to take advantage of the above new framework features
- New drivers for Ricoh RC5T583, TI TPS62362, TI TPS62363, TI
TPS65913, TI TWL6035 and TI TWL6037.
Some of the registration changes to support the core refactoring
caused so many conflicts that eventually topic branches were abandoned
for this release."
* tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (227 commits)
regulator: tps65910: use of_node of matched regulator being register
regulator: tps65910: dt: support when "regulators" node found
regulator: tps65910: add error message in case of failure
regulator: tps62360: dt: initialize of_node param for regulator register.
regulator: tps65910: use devm_* for memory allocation
regulator: tps65910: use small letter for regulator names
mfd: tpx6586x: Depend on regulator
regulator: regulator for Palmas Kconfig
regulator: regulator driver for Palmas series chips
regulator: Enable Device Tree for the db8500-prcmu regulator driver
regulator: db8500-prcmu: Separate regulator registration from probe
regulator: ab3100: Use regulator_map_voltage_iterate()
regulator: tps65217: Convert to set_voltage_sel and map_voltage
regulator: Enable the ab8500 for Device Tree
regulator: ab8500: Split up probe() into manageable pieces
regulator: max8925: Remove check_range function and max_uV from struct rc5t583_regulator_info
regulator: max8649: Remove unused check_range() function
regulator: rc5t583: Remove max_uV from struct rc5t583_regulator_info
regulator: da9052: Convert to set_voltage_sel and map_voltage
regulator: max8952: Use devm_kzalloc
...
A surprisingly large series of updates for regmap this time, mostly due
to all the work Stephen Warren has done to add support for MMIO buses.
This wasn't really the target for the framework but it turns out that
there's a reasonable number of cases where it's very helpful to use the
register cache support to allow the register map to remain available
while the device is suspended.
- A MMIO bus implementation, contributed by Stephen Warren. Currently this
is limited to 32 bit systems and native endian registers.
- Support for naming register maps, mainly intended for MMIO devices with
multiple register banks. This was also contributed by Stephen Warren.
- Support for register striding, again contributed by Stephen Warren and
mainly intended for use with MMIO as typically the registers will be a
fixed size but byte addressed.
- irqdomain support for the generic regmap irq_chip, including support
for dynamically allocate interrupt numbers.
- A function dev_get_regmap() which allows frameworks using regmap to
obtain the regmap for a device from the struct device, making life a
little simpler for them.
- Updates to regmap-irq to support more chips (contributed by Graeme
Gregory) and to use irqdomains.
- Support for devices with 24 bit register addresses.
The striding support collided with all the topic branches so the
branches look a bit messy and eventually I just gave up. There's also
the TI Palmas driver and a couple of other isolated MFD patches that
all depend on new regmap features so are being merged here.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJPtnhRAAoJEBus8iNuMP3d5yUQAJOHY+V9czTi87j6wRSOPJp+
JhTIpn5dgpe38gScGVxNXW9kvb+W/m9iVySvkWY4r79tGED8YjYQbof53mdilxww
JhinDpUU4bSysgMCHJiVonOYwfeehBCuQhyk1DG4Fp7v8sc8sCFXo5HpdNMNDU+G
QC0Dlo5kqceJY/miOdiprjKGcOLwZYtXb/c++CCfYbrQlg7+XdyDUcegQrDn3Tg9
ZIzl/cTuZJQ8FhewVR19ScmMA3pHaXXBWxuvdscEVPLIHoFi0Vbc/qFUUddEfA6Q
g7wa5/hCOUnBTmCPdlt4fveXQllZSq5hj6cvLRuMtUFX9A1nqcYNUroLAnoJ9QVO
6JrCmvW6A8GxgMklf1aFvcOf3xoM0yQaTOy/bFzO52LHFV28bxcwG2572gLiMmn3
u8+z4voWy36kLDyUzwNzJ4vI1GjuyedPWSgXOX8D8S1UV1I0DeTrBEQEiVutJCP5
KsuGaYtmrXF20H7KnSufDYLTXMU/7hLMZhroNcglRKaYMf34A/kNGYHLb00JhrnC
rWqPjGA+Wplj8IJXrZcALZqBODGcBL/jZR0+Uc1K03rnm5G/8O0IZqbwFIam0c/+
UDj/IrvoYliI2U3FdRS+MO+lN3+SK7OVvwP1qYROcmCsKt4R3FLLaPzLRXizrfHk
JmlwCGWFIHu7jDtnUA6W
=pjN4
-----END PGP SIGNATURE-----
Merge tag 'regmap-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"A surprisingly large series of updates for regmap this time, mostly
due to all the work Stephen Warren has done to add support for MMIO
buses. This wasn't really the target for the framework but it turns
out that there's a reasonable number of cases where it's very helpful
to use the register cache support to allow the register map to remain
available while the device is suspended.
- A MMIO bus implementation, contributed by Stephen Warren. Currently
this is limited to 32 bit systems and native endian registers.
- Support for naming register maps, mainly intended for MMIO devices
with multiple register banks. This was also contributed by Stephen
Warren.
- Support for register striding, again contributed by Stephen Warren
and mainly intended for use with MMIO as typically the registers
will be a fixed size but byte addressed.
- irqdomain support for the generic regmap irq_chip, including support
for dynamically allocate interrupt numbers.
- A function dev_get_regmap() which allows frameworks using regmap to
obtain the regmap for a device from the struct device, making life a
little simpler for them.
- Updates to regmap-irq to support more chips (contributed by Graeme
Gregory) and to use irqdomains.
- Support for devices with 24 bit register addresses.
The striding support collided with all the topic branches so the
branches look a bit messy and eventually I just gave up. There's also
the TI Palmas driver and a couple of other isolated MFD patches that
all depend on new regmap features so are being merged here."
* tag 'regmap-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (24 commits)
mfd: palmas PMIC device support Kconfig
mfd: palmas PMIC device support
regmap: Fix typo in IRQ register striding
mfd: wm8994: Update to fully use irq_domain
regmap: add support for non contiguous status to regmap-irq
regmap: Convert regmap_irq to use irq_domain
regmap: Pass back the allocated regmap IRQ controller data
mfd: da9052: Fix genirq abuse
regmap: Implement dev_get_regmap()
regmap: Devices using format_write don't support bulk operations
regmap: Converts group operation into single read write operations
regmap: Cache single values read from the chip
regmap: fix compile errors in regmap-irq.c due to stride changes
regmap: implement register striding
regmap: fix compilation when !CONFIG_DEBUG_FS
regmap: allow regmap instances to be named
regmap: validate regmap_raw_read/write val_len
regmap: mmio: remove some error checks now in the core
regmap: mmio: convert some error returns to BUG()
regmap: add MMIO bus support
...
Pull core ARM updates from Russell King:
"This is the bulk of the core ARM updates for this merge window.
Included in here is a different way to handle the VIVT cache flushing
on context switch, which should allow scheduler folk to remove a
special case in their core code.
We have architectured timer support here, which is a set of timers
specified by the ARM architecture for future SoCs. So we should see
less variability in timer design going forward.
The last big thing here is my cleanup to the way we handle PCI across
ARM, fixing some oddities in some platforms which hadn't realised
there was a way to deal with their private data already built in to
our PCI backend.
I've also removed support for the ARMv3 architecture; it hasn't worked
properly for years so it seems pointless to keep it around."
* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (47 commits)
ARM: PCI: remove per-pci_hw list of buses
ARM: PCI: dove/kirkwood/mv78xx0: use sys->private_data
ARM: PCI: provide a default bus scan implementation
ARM: PCI: get rid of pci_std_swizzle()
ARM: PCI: versatile: fix PCI interrupt setup
ARM: PCI: integrator: use common PCI swizzle
ARM: 7416/1: LPAE: Remove unused L_PTE_(BUFFERABLE|CACHEABLE) macros
ARM: 7415/1: vfp: convert printk's to pr_*'s
ARM: decompressor: avoid speculative prefetch from non-RAM areas
ARM: Remove ARMv3 support from decompressor
ARM: 7413/1: move read_{boot,persistent}_clock to the architecture level
ARM: Remove support for ARMv3 ARM610 and ARM710 CPUs
ARM: 7363/1: DEBUG_LL: limit early mapping to the minimum
ARM: 7391/1: versatile: add some auxdata for device trees
ARM: 7389/2: plat-versatile: modernize FPGA IRQ controller
AMBA: get rid of last two uses of NO_IRQ
ARM: 7408/1: cacheflush: return error to userspace when flushing syscall fails
ARM: 7409/1: Do not call flush_cache_user_range with mmap_sem held
ARM: 7404/1: cmpxchg64: use atomic64 and local64 routines for cmpxchg64
ARM: 7347/1: SCU: use cpu_logical_map for per-CPU low power mode
...
Pull clkdev updates from Russell King:
"This supplements clkdev with a device-managed API, allowing drivers
cleanup paths to be simplified. We also optimize clk_find() so that
it exits as soon as it finds a perfect match, and we provide a way to
minimise the amount of code platforms need to register clkdev entries.
Some of the code in arm-soc depends on these changes."
* 'clkdev' of git://git.linaro.org/people/rmk/linux-arm:
CLKDEV: provide helpers for common clock framework
ARM: 7392/1: CLKDEV: Optimize clk_find()
ARM: 7376/1: clkdev: Implement managed clk_get()
Pull m68k updates from Geert Uytterhoeven.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Setup CROSS_COMPILE at the top
m68k: Correct the Atari ALLOWINT definition
m68k/video: Create <asm/vga.h>
m68k: Make sure {read,write}s[bwl]() are always defined
m68k/mm: Port OOM changes to do_page_fault()
scsi/atari: Make more functions static
scsi/atari: Revive "atascsi=" setup option
net/ariadne: Improve debug prints
m68k/atari: Change VME irq numbers from unsigned long to unsigned int
m68k/amiga: Use arch_initcall() for registering platform devices
m68k/amiga: Add error checks when registering platform devices
m68k/amiga: Mark z_dev_present() __init
m68k: Remove unused MAX_NOINT_IPL definition
Pull networking changes from David Miller:
1) Get rid of the error prone NLA_PUT*() macros that used an embedded
goto.
2) Kill off the token-ring and MCA networking drivers, from Paul
Gortmaker.
3) Reduce high-order allocations made by datagram AF_UNIX sockets, from
Eric Dumazet.
4) Add PTP hardware clock support to IGB and IXGBE, from Richard
Cochran and Jacob Keller.
5) Allow users to query timestamping capabilities of a card via
ethtool, from Richard Cochran.
6) Add loadbalance mode to the teaming driver, from Jiri Pirko. Part
of this is that we can now have BPF filters not attached to sockets,
and the loadbalancing function is calculated using one.
7) Francois Romieu went through the network drivers removing gratuitous
uses of netdev->base_addr, perhaps some day we can remove it
completely but it's used for ISA probing still.
8) Add a BPF JIT for sparc. I know, who cares, right? :-)
9) Move networking sysctl registry away from using the compatability
mode interfaces in the sysctl code. From Eric W Biederman.
10) Pavel Emelyanov added a way to save and restore TCP socket state via
TCP_REPAIR, TCP_REPAIR_QUEUE, and TCP_QUEUE_SEQ socket options as
well as a way to forcefully bind a socket to a port via the
sk->sk_reuse value SK_FORCE_REUSE. There is also a
TCP_REPAIR_OPTIONS which allows to reinstante the TCP options
enabled on the connection.
11) Several enhancements from Eric Dumazet that, in particular, can
enhance splice performance on TCP sockets significantly.
a) Reset the offset of the per-socket sendmsg page when we know
we're the only use of the page in linear_to_page().
b) Add facilities such that skb->data can be backed a page rather
than SLAB kmalloc'd memory. In particular devices which were
receiving into linear RX buffers can now end up providing paged
data.
The big result is that code like splice and GRO do not have to copy
any more.
12) Allow a pure sender to more gracefully handle ACK backlogs in TCP.
What can happen at high rates is that the sender hasn't grown his
receive buffer limits at all (he's not receiving data so really
doesn't need to), but the non-data ACKs consume receive buffer
space.
sk_add_backlog() is too aggressive in dropping frames in this case,
so relax it's requirements by using the receive buffer plus the send
buffer limit as the backlog limit instead of just the former.
Also from Eric Dumazet.
13) Add ipv6 support to L2TP, from Benjamin LaHaise, James Chapman, and
Chris Elston.
14) Implement TCP early retransmit (RFC 5827), from Yuchung Cheng.
Basically, we can start fast retransmit before hiting the dupack
threshold under certain conditions.
15) New CODEL active queue management packet scheduler, from Eric
Dumazet based upon initial work by Dave Taht.
Basically, the big feature is that packets are dropped (or ECN bits
are set) based upon how long packets live in the queue, rather than
the queue length (which is what RED uses).
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1341 commits)
drivers/net/stmmac: seq_file fix memory leak
ipv6/exthdrs: strict Pad1 and PadN check
USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z
USB: qmi_wwan: Add ZTE (Vodafone) K3765-Z
USB: qmi_wwan: Make forced int 4 whitelist generic
net/ipv4: replace simple_strtoul with kstrtoul
net/ipv4/ipconfig: neaten __setup placement
net: qmi_wwan: Add Vodafone/Huawei K5005 support
net: cdc_ether: Add ZTE WWAN matches before generic Ethernet
ipv6: use skb coalescing in reassembly
ipv4: use skb coalescing in defragmentation
net: introduce skb_try_coalesce()
net:ipv6:fixed space issues relating to operators.
net:ipv6:fixed a trailing white space issue.
ipv6: disable GSO on sockets hitting dst_allfrag
tg3: use netdev_alloc_frag() API
net: napi_frags_skb() is static
ppp: avoid false drop_monitor false positives
ipv6: bool/const conversions phase2
ipx: Remove spurious NULL checking in ipx_ioctl().
...
This branch simplifies and clarifies the dcache lookup, and allows us to
do certain nice optimizations when comparing dentries. It also cleans
up the interface to __d_lookup_rcu(), especially around passing the
inode information around.
* dentry-cleanups:
vfs: make it possible to access the dentry hash/len as one 64-bit entry
vfs: move dentry name length comparison from dentry_cmp() into callers
vfs: do the careful dentry name access for all dentry_cmp cases
vfs: remove unnecessary d_unhashed() check from __d_lookup_rcu
vfs: clean up __d_lookup_rcu() and dentry_cmp() interfaces
This series sanitizes the interface to unmap_vma(). The crazy interface
annoyed me no end when I was looking at unmap_single_vma(), which we can
spend quite a lot of time in (especially with loads that have a lot of
small fork/exec's: shell scripts etc).
Moving the nr_accounted calculations to where they belong at least
clarifies things a little. I hope to come back to look at the
performance of this later, but if/when I get back to it I at least don't
have to see the crazy interfaces any more.
* vm-cleanups:
vm: remove 'nr_accounted' calculations from the unmap_vmas() interfaces
vm: simplify unmap_vmas() calling convention
Move tcp_try_coalesce() protocol independent part to
skb_try_coalesce().
skb_try_coalesce() can be used in IPv4 defrag and IPv6 reassembly,
to build optimized skbs (less sk_buff, and possibly less 'headers')
skb_try_coalesce() is zero copy, unless the copy can fit in destination
header (its a rare case)
kfree_skb_partial() is also moved to net/core/skbuff.c and exported,
because IPv6 will need it in patch (ipv6: use skb coalescing in
reassembly).
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull block layer fixes from Jens Axboe:
"A few small, but important fixes. Most of them are marked for stable
as well
- Fix failure to release a semaphore on error path in mtip32xx.
- Fix crashable condition in bio_get_nr_vecs().
- Don't mark end-of-disk buffers as mapped, limit it to i_size.
- Fix for build problem with CONFIG_BLOCK=n on arm at least.
- Fix for a buffer overlow on UUID partition printing.
- Trivial removal of unused variables in dac960."
* 'for-linus' of git://git.kernel.dk/linux-block:
block: fix buffer overflow when printing partition UUIDs
Fix blkdev.h build errors when BLOCK=n
bio allocation failure due to bio_get_nr_vecs()
block: don't mark buffers beyond end of disk as mapped
mtip32xx: release the semaphore on an error path
dac960: Remove unused variables from DAC960_CreateProcEntries()
Mostly bool conversions, some inline removals and const additions.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix two issues introduced in commit a1c7fff7e1
( net: netdev_alloc_skb() use build_skb() )
- Must be IRQ safe (non NAPI drivers can use it)
- Must not leak the frag if build_skb() fails to allocate sk_buff
This patch introduces netdev_alloc_frag() for drivers willing to
use build_skb() instead of __netdev_alloc_skb() variants.
Factorize code so that :
__dev_alloc_skb() is a wrapper around __netdev_alloc_skb(), and
dev_alloc_skb() a wrapper around netdev_alloc_skb()
Use __GFP_COLD flag.
Almost all network drivers now benefit from skb->head_frag
infrastructure.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Palmas is a PMIC from Texas Instruments and this is the MFD part of the
driver for this chip. The PMIC has SMPS and LDO regulators, a general
purpose ADC, GPIO, USB OTG mode detection, watchdog and RTC features.
Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
ipv6_opt_accepted() returns a bool, and can use const pointers
ipv6_addr_equal(), ipv6_addr_any(), ipv6_addr_loopback(),
ipv6_addr_orchid() return a bool.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- match() method returns a boolean
- return (A && B && C && D) -> return A && B && C && D
- fix indentation
Signed-off-by: Eric Dumazet <edumazet@google.com>
More spring cleaning!
The ancient Econet protocol should go. Most of the bug fixes in recent
years have been fixing security vulnerabilities. The hardware hasn't
been made since the 90s, it is only interesting as an archeological curiosity.
For the truly curious, or insomniac, go read up on it.
http://en.wikipedia.org/wiki/Econet
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable dynamic debugging and remove a bunch of #ifdef/#endifs.
Add a lapb_dbg(level, fmt, ...) macro and replace the
printk(KERN_DEBUG uses.
Add pr_fmt and remove embedded prefixes.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The padding destination or hop-by-hop option is called Pad1 and not Pad0.
See RFC2460 (4.2) or the IANA ipv6-parameters registry:
http://www.iana.org/assignments/ipv6-parameters/ipv6-parameters.xml
Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix some minor problems in comments of etherdevice.h
* Warning is out dated, file hasn't moved or disappeared in many years and
is unlikely to do so soon.
* Capitalize Ethernet consistently since it is a proper name
* Fix descriptive comment of padding
* Spelling and grammar fix for alignment comment
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bool conversions where possible.
__inline__ -> inline
space cleanups
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf, x86 and scheduler updates from Ingo Molnar.
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing: Do not enable function event with enable
perf stat: handle ENXIO error for perf_event_open
perf: Turn off compiler warnings for flex and bison generated files
perf stat: Fix case where guest/host monitoring is not supported by kernel
perf build-id: Fix filename size calculation
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, kvm: KVM paravirt kernels don't check for CPUID being unavailable
x86: Fix section annotation of acpi_map_cpu2node()
x86/microcode: Ensure that module is only loaded on supported Intel CPUs
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix KVM and ia64 boot crash due to sched_groups circular linked list assumption
bool/const conversions where possible
__inline__ -> inline
space cleanups
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for ALUA MI_REPORT_TARGET_PGS extended header
format defined within SPC-4. It changes target core ALUA emulation logic
within target_emulate_report_target_port_groups() to support both the
extended and original length only header formats.
It includes adding a new 'implict_trans_secs' attribute for each ALUA
target port group to control the value returned to the application client
for an recommended implict translation timeout in seconds. By default
this value is currently set to zero, and limited up to 255 by virtue of
using a single byte in the extended header format.
This value is used by target_emulate_report_target_port_groups() within
the extended header logic to set IMPLICIT TRANSITION TIME as defined by
spc4r30.
Cc: Hannes Reinecke <hare@suse.de>
Cc: Rob Evers <revers@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Large timeout parameters could result wrong timeout values due to
an overflow at msec to jiffies conversion (reported by Andreas Herz)
[ This patch was mangled by Pablo Neira Ayuso since David Laight and
Eric Dumazet noticed that we were using hardcoded 1000 instead of
MSEC_PER_SEC to calculate the timeout ]
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
David Miller says:
The canonical way to validate if the set bits are in a valid
range is to have a "_ALL" macro, and test:
if (val & ~XT_HASHLIMIT_ALL)
goto err;"
make it so.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull networking tree from David Miller:
1) ptp_pch driver build broke during this merge window due to missing
slab.h header, fix from Geery Uytterhoeven.
2) If ipset passes in a bogus hash table size we crash because the size
is not validated properly. Compounding this, gcc-4.7 can miscompile
ipset such that even when the user specifies legitimate parameters
the tool passes in an out-of-range size to the kernel.
Fix from Jozsef Kadlecsik.
3) Users have reported that the netdev watchdog can trigger with pch_gbe
devices, and it turns out this is happening because of races in the
TX path of the driver leading to the transmitter hanging. Fix from
Eric Dumazet, reported and tested by Andy Cress.
4) Novatel USB551L devices match the generic class entries for the cdc
ethernet USB driver, but they don't work because they have generic
descriptors and thus need FLAG_WWAN to function properly.
Add the necessary ID table entry to fix this, from Dan Williams.
5) A recursive locking fix in the USBNET driver added a new problem, in
that packet list traversal is now racy and we can thus access
unlinked SKBs and crash.
Avoid this situation by adding some extra state tracking, from Ming
Lei.
6) The rtlwifi conversion to asynchronous firmware loading is racy, fix
by reordering the probe procedure. From Larry Finger.
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=43187
7) Fix regressions with bluetooth keyboards by notifying userland
properly when the security level changes, from Gustavo Padovan.
8) Bluetooth needs to make sure device connected events are emitted
before other kinds of events, otherwise userspace will think there is
no baseband link yet and therefore abort the sockets associated with
that connection.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
netfilter: ipset: fix hash size checking in kernel
ptp_pch: Add missing #include <linux/slab.h>
pch_gbe: fix transmit races
cdc_ether: add Novatel USB551L device IDs for FLAG_WWAN
usbnet: fix skb traversing races during unlink(v2)
Bluetooth: mgmt: Fix device_connected sending order
Bluetooth: notify userspace of security level change
rtlwifi: fix for race condition when firmware is cached
The hash size must fit both into u32 (jhash) and the max value of
size_t. The missing checking could lead to kernel crash, bug reported
by Seblu.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- sock_flag() accepts a const pointer
- sock_flag() returns a boolean
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
codel_should_drop() logic allows a packet being not dropped if queue
size is under max packet size.
In fq_codel, we have two possible backlogs : The qdisc global one, and
the flow local one.
The meaningful one for codel_should_drop() should be the global backlog,
not the per flow one, so that thin flows can have a non zero drop/mark
probability.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Dave Taht <dave.taht@bufferbloat.net>
Cc: Kathleen Nichols <nichols@pollere.com>
Cc: Van Jacobson <van@pollere.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
MISDN_CTRL_RX_OFF is a meachanism to discard RX data in the driver if
the data is not needed by the application. It can be used when playing
mesages, but not recording or with unidirectional protocols.
Signed-off-by: Karsten Keil <kkeil@linux-pingi.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
MISDN_CTRL_FILL_EMPTY is a meachanism to send a fixed value (normally silence)
as long no data from upper layers is available. It can be used when recording
voice messages or with unidirectional protocols.
Signed-off-by: Karsten Keil <kkeil@linux-pingi.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the FIFO of the card is small, many short messages are queued up to
the upper layers and the userspace. This change allows the applications
to set a minimum datalen they want from the drivers.
Create a common control function to avoid code duplication in each
driver.
Signed-off-by: Karsten Keil <kkeil@linux-pingi.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
We did allways allocate maxsize buffers, but for transparent data we know
the actual size.
Use a common function to calculate size and detect overflows.
Signed-off-by: Karsten Keil <kkeil@linux-pingi.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is better to send a confirm for transparent data early as possible
to avoid TX underuns.
Signed-off-by: Karsten Keil <kkeil@linux-pingi.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support for monitor device intended to capture all the network activity.
This interface could be used by networks sniffers and is already
supported by WireShark. That's a good test point to check that basic
MAC support works.
Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This stack implementation distinguishes several types of slave
interfaces. Another parameter to 'add_iface_' function is added
to clarify the interface type is going to be registered.
Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According IEEE 802.15.4 standard each node can be either full functionality
device (FFD) or reduce functionality device (RFD). So 2 sets of operations
are needed. This patch declare RFD operations structure.
Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Main RX data path implementation between physical and mac layers.
Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An interface to allocate and register ieee802154 compatible device.
The allocated device has the following representation in memory:
+-----------------------+
| struct wpan_phy |
+-----------------------+
| struct mac802154_priv |
+-----------------------+
| driver's private data |
+-----------------------+
Used by device drivers to register new instance in the stack.
Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The IEEE 802.15.4 Working Group focuses on the standardization of the
bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC.
The MAC layer provides access control to a shared channel and reliable
data delivery. The main functions performed by the MAC sublayer are:
association and disassociation, security control, optional star
network topology functions, such as beacon generation and Guaranteed
Time Slots (GTSs) management, generation of ACK frames (if used), and,
finally, application support for the two possible network topologies
described in the standard.
This is an initial commit which describes main data structures needed
for ieee802.15.4 compatible devices representation in the MAC layer.
Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Linville says:
Here are three more fixes that some of my developers are desperate to
see included in 3.4...
Johan Hedberg went to some length justifyng the inclusion of these two
Bluetooth fixes:
"The device_connected fix should be quite self-explanatory, but it's
actually a wider issue than just for keyboards. All profiles that do
incoming connection authorization (e.g. headsets) will break without it
with specific hardware. The reason it wasn't caught earlier is that it
only occurs with specific Bluetooth adapters.
As for the security level patch, this fixes L2CAP socket based security
level elevation during a connection. The HID profile needs this (for
keyboards) and it is the only way to achieve the security level
elevation when using the management interface to talk to the kernel
(hence the management enabling patch being the one that exposes this"
The rtlwifi fix addresses a regression related to firmware loading,
as described in kernel.org bug 43187. It basically just moves a hunk
of code to a more appropriate place.
Signed-off-by: David S. Miller <davem@davemloft.net>
