This commit adds a kernel-doc entry for the MPC block. Since it enabled
the kernel-doc to parse some of the documentation in the mpc.h file,
fixing some of the comments was required.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit introduces basic DPP information and the struct scan for
code documentation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The 'stream' pointer is used in dcn10_set_output_transfer_func() before
the check if 'stream' is NULL.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn10/dcn10_hwseq.c:1892 dcn10_set_output_transfer_func() warn: variable dereferenced before check 'stream' (see line 1875)
Fixes: ddef02de0d ("drm/amd/display: add null checks before logging")
Cc: Wyatt Wood <wyatt.wood@amd.com>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the documentation to extract code documentation from dchubbub.h
file.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Create the HUBP documentation page and add the doc references to extract
the HUBP code documentation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Color caps changed between HW versions, which caused the DCN10 color
state sections in the DTN log to no longer match DCN2+ state. Create a
color state log specific to DCN2.0 and hook it up to DCN2 family
drivers. Instead of reading gamut remap reg values, display gamut remap
matrix data in fixed 31.32.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add color caps information for DPP and MPC block to show HW color caps.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Color caps changed between HW versions, which caused the DCN10 color
state sections in the DTN log to no longer match DCN3+ state. Create a
color state log specific to DCN3.0 and hook it up to DCN3.0+ and DCN3.1+
drivers.
rfc-v2:
- detail RAM mode for gamcor and blnd gamma blocks
- add MPC gamut remap matrix log
v3:
- read MPC gamut remap matrix in fixed 31.32 format
- extend to DCN3.0+ and DCN3.1+ drivers (Harry)
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- FW Release 0.0.201.0
- Fix resizing video window for dcn321
- Fix timing bandwidth calculation for HDMI
- Fix null-deref in dml2 assigned pipe search
- Add GART memory support for dmcub
- Add power_state and pme_pending flag
- Add usb4_bw_alloc_support flag
- Revert "Rework DC Z10 restore
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Because ABM will wait VStart to start getting histogram data,
it will cause we can't enter IPS while full screnn video playing.
[How]
Modify the panel refresh rate to the maximun multiple of current
refresh rate.
Reviewed-by: Dennis Chan <dennis.chan@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
It has been found a regression caused by enabling this feature during ODM to
MPC combine switch when user is resizing video window. The transition is
only needed when the feature is enabled. During the transition driver will
temporary switch to use max dppclk level through SMU set hard min interface.
The interface times out and fail to configure the max dpp clock level, which caused
system issue as the desired clock can't be set. We will continue investigating
the issue and root cause the issue where max dppclk level can't be reached.
But for now we have to disable this feature as this feature will cause us to hit this
problem in common use cases during video playback unfortunately. The issue
is dcn321 specific so it won't impact other dcn revisions.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit e6f82bd44b.
It caused intermittent hangs when enabling IPS on static screen.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[what]
Adding power_state to dc.h and pme_pending flag to clk_mgr_internal.h
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dc should have a flag for DM to enable usb4_bw_alloc in dptx
[How]
- Add usb4_bw_alloc_support flag in dc_config
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Peichen Huang <peichen.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Logging DCN3 MPC state was following DCN1 implementation that doesn't
consider new DCN3 MPC color blocks. Create new elements according to
DCN3 MPC color caps and a new DCN3-specific function for reading MPC
data.
v3:
- remove gamut remap reg reading in favor of fixed31_32 matrix data
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why && How]
The current bandwidth calculation for timing doesn't account for
certain HDMI modes overhead which leads to DSC can't be enabled.
Add support to calculate the actual bandwidth for these HDMI modes.
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We want to be able to read the MPC's gamut remap matrix similar to
what we do with .dpp_get_gamut_remap functions. On the other hand, we
don't need a hook here because only DCN3+ has the MPC gamut remap
block, being absent in previous families.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCN3 DPP color state was uncollected and some state elements from DCN1
doesn't fit DCN3. Create new elements according to DCN3 color caps and
fill them up for DTN log output.
rfc-v2:
- fix reading of gamcor and blnd gamma states
- remove gamut remap register in favor of gamut remap matrix reading
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of read gamut remap data from hw values, convert HW register
values (S2D13) into a fixed-point 31.32 matrix for color state log.
Change DCN10 log to print data in the format of the gamut remap matrix.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We want to be able to read the DPP's gamut remap matrix.
v2:
- code-style and doc comments clean-up (Melissa)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prepare to hook up color state log according to the DCN version.
v3:
- put functions in single line (Siqueira)
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The 'status' variable in 'core_link_read_dpcd()' &
'core_link_write_dpcd()' was uninitialized.
Thus, initializing 'status' variable to 'DC_ERROR_UNEXPECTED' by default.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:226 core_link_read_dpcd() error: uninitialized symbol 'status'.
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:248 core_link_write_dpcd() error: uninitialized symbol 'status'.
Cc: stable@vger.kernel.org
Cc: Jerry Zuo <jerry.zuo@amd.com>
Cc: Jun Lei <Jun.Lei@amd.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the below gcc with W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_replay.c:262: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Set REPLAY power optimization flags and coasting vtotal.
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_replay.c:284: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* send Replay general cmd to DMUB.
Fixes: e379787cbc ("drm/amd/display: Add some functions for Panel Replay")
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is likely that the statement related to 'dml_edp' is misplaced. So move
it in the correct "case SIGNAL_TYPE_EDP".
Fixes: 7966f319c6 ("drm/amd/display: Introduce DML2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Align the returned error code with legacy DP
- Allow Z8 for multiplane configurations on DCN35
- Set default Z8 minimum residency for DCN35
- Rework DC Z10 restore
- Enable Panel Replay for static screen use case
- Add DP audio BW validation
- Fix dml2 assigned pipe search
- Ensure populate uclk in bb construction
- Update P010 scaling cap
- Reenable windowed mpo odm support
- Fix DML2 watermark calculation
- Clear OPTC mem select on disable
- Floor to mhz when requesting dpp disp clock changes to SMU
- Port DENTIST hang and TDR fixes to OTG disable W/A
- Add logging resource checks
- Add Replay IPS register for DMUB command table
- Init link enc resources in dc_state only if res_pool presents
- Allow IPS2 during Replay
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Power improvement over DCN314, but also addresses a functional issue
where plane_state remains uncleared on pipes that aren't actually
active.
[How]
Update the check to allow for zero streams to be treated as z8 allow.
Update the check to remove plane count on the active stream case.
Z8 will still be blocked based on stutter duration, which is likely to
be the case for most multi plane configurations.
Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Match DCN314's policy.
Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The call currently does two things:
1. Exits DMCUB from idle optimization if it was in
2. Checks DMCUB scratch register to determine if we need to call
DMCUB to do deferred HW restore and then sends the command if it's
ready for it.
By doing (1) we prevent driver idle from being renotified in the cases
where driver had previously allowed DC level idle optimizations via
dc_allow_idle_optimizations since it thinks:
allow == dc->idle_optimizations_allowed
...and that the operation is a no-op.
We want driver idle to be resent at the next opprotunity to do so
for video playback cases.
[How]
Migrate all usecases of dc_z10_restore to only perform (2).
Add extra calls to dc_allow_idle_optimizations to handle (1) and also
keep SW state matching with when we requested enter/exit of DMCUB
idle optimizations.
Ensure cursor idle optimizations false always get called when IPS
is supported.
Further rework/redesign is needed to decide whether we need a separate
level of DM allow vs DC allow and when to attempt re-entry.
Reviewed-by: Yihan Zhu <yihan.zhu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Timings with small HBlank (such as CVT RBv2) can result in insufficient
HBlank bandwidth for audio SDP transmission when DSC is active. This
will cause some higher bandwidth audio modes to fail.
The combination of CVT RBv2 timings + DSC can commonly be encountered
in MST scenarios.
[How]
Add DP audio bandwidth validation for 8b/10b MST and 128b/132b SST/MST
cases and filter out modes that cannot be supported with the current
timing config.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
DML2 currently finds assigned pipes in array order rather than the
existing linked list order. This results in rearranging pipe order
on flip and more importantly otg inst and pipe idx mismatch.
This change preserves the order of existing pipes and guarantees
the head pipe will have matching otg inst and pipe idx.
Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- For some SKUs, the optimal DCFCLK for each UCLK is less than the
smallest DCFCLK STA target due to low memory bandwidth. There is
an assumption that the DCFCLK STA targets will always be less
than one of the optimal DCFCLK values, but this is not true for
SKUs that have low memory bandwidth. In this case we need to
populate the optimal UCLK for each DCFCLK STA targets as the max
UCLK freq.
- Also fix a bug in DML where start_state is not assigned and used
correctly.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Keep the same as previous APU and also insert clock dump
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
core_mode_programming in DML2 should output watermark calculations
to locals, but it incorrectly uses mode_lib
[How]
update code to match HW DML2
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Not clearing the memory select bits prior to OPTC disable can cause DSC
corruption issues when attempting to reuse a memory instance for another
OPTC that enables ODM.
[How]
Clear the memory select bits prior to disabling an OPTC.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SMU uses discrete dpp and disp clock levels. When we submit SMU request
for clock changes in Mhz we need to floor the requested value from Khz so
SMU will choose the next higher clock level in Khz to set. If we ceil to
Mhz, SMU will have to choose the next higher clock level after the ceil,
which could result in unnecessarily jumpping to the next level.
For example, we request 1911,111Khz which is exactly one of the SMU preset
level. If we pass 1912Mhz, SMU will choose 2150,000 khz. If we pass
1911Mhz, SMU will choose 1911,111kHz, which is the expected value.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We can experience DENTIST hangs during optimize_bandwidth or TDRs if
FIFO is toggled and hangs.
[How]
Port the DCN35 fixes to DCN314.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When mapping resources, resources could be unavailable.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Theoretically, it would be possible for a buggy or malicious VBIOS to
overwrite past the bounds of the passed parameters (or its own
workspace); add bounds checking to prevent this from happening.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3093
Signed-off-by: Alexander Richards <electrodeyt@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
res_pool is not initialized in all situations such as virtual
environments, and therefore link encoder resources should not be
initialized if res_pool is NULL.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add regkey to block video playback in IPS2 by default
Allow idle optimizations in the same spot we allow Replay for
video playback usecases.
Avoid sending it when there's an external display connected by
modifying the allow idle checks to check for active non-eDP screens.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In link_set_dsc_pps_packet(), 'struct display_stream_compressor *dsc'
was dereferenced in a DC_LOGGER_INIT(dsc->ctx->logger); before the 'dsc'
NULL pointer check.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dpms.c:905 link_set_dsc_pps_packet() warn: variable dereferenced before check 'dsc' (see line 903)
Cc: stable@vger.kernel.org
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang warns (or errors with CONFIG_WERROR=y) when performing arithmetic
with different enumerated types, which is usually a bug:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_dpia_bw.c:548:24: error: arithmetic between different enumeration types ('const enum dc_link_rate' and 'const enum dc_lane_count') [-Werror,-Wenum-enum-conversion]
548 | link_cap->link_rate * link_cap->lane_count * LINK_RATE_REF_FREQ_IN_KHZ * 8;
| ~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~
1 error generated.
In this case, there is not a problem because the enumerated types are
basically treated as '#define' values. Add an explicit cast to an
integral type to silence the warning.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1976
Fixes: 5f3bce1326 ("drm/amd/display: Request usb4 bw for mst streams")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Improve z8/z10 support.
- Revert some of the VRR optimization.
- Improve usb4 when using MST.
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Dpia hpd status not in sync causing driver not enabling BW Alloc after
S4.
[How]
Update hpd_status of the link when querying hpd state from dmub in
dpia_query_hpd_status().
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adjust z8 latency for performance.
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit d0f639c586.
The previous commit causes failure to light up for 1080p
eDP + 8k HDMI panel combo.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
When usb4 bandwidth allocation mode is enabled, driver need to request
bandwidth from connection manager. For mst link, the requested
bandwidth should be big enough for all remote streams.
[HOW]
- If mst link, the requested bandwidth should be the sum of all mst
streams bandwidth added with dp MTPH overhead.
- Allocate/deallcate usb4 bandwidth when setting dpms on/off.
- When doing display mode validation, driver also need to consider total
bandwidth of all mst streams for mst link.
Reviewed-by: Cruise Hung <cruise.hung@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Peichen Huang <peichen.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
