Disabling IDXD device doesn't reset Page Request Service (PRS)
disable flag to its initial value 0. This may cause user confusion
because once PRS is disabled user will see PRS still remains the
previous setting (i.e. disabled) via sysfs interface even after the
device is disabled.
To eliminate user confusion, reset PRS disable flag to ensure that
the PRS flag bit reflects correct state after the device is disabled.
Additionally, simplify the code by setting wq->flags to 0, which clears
all flag bits, including any future additions.
Fixes: f2dc327131 ("dmaengine: idxd: add per wq PRS disable")
Tested-by: Tony Zhu <tony.zhu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230712193505.3440752-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
pl330_pause() does not set anything to indicate paused condition which
causes pl330_tx_status() to return DMA_IN_PROGRESS. This breaks 8250
DMA flush after the fix in commit 57e9af7831 ("serial: 8250_dma: Fix
DMA Rx rearm race"). The function comment for pl330_pause() claims
pause is supported but resume is not which is enough for 8250 DMA flush
to work as long as DMA status reports DMA_PAUSED when appropriate.
Add PAUSED state for descriptor and mark BUSY descriptors with PAUSED
in pl330_pause(). Return DMA_PAUSED from pl330_tx_status() when the
descriptor is PAUSED.
Reported-by: Richard Tresidder <rtresidd@electromag.com.au>
Tested-by: Richard Tresidder <rtresidd@electromag.com.au>
Fixes: 88987d2c75 ("dmaengine: pl330: add DMA_PAUSE feature")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-serial/f8a86ecd-64b1-573f-c2fa-59f541083f1a@electromag.com.au/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230526105434.14959-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The codeaurora.org email domain is defunct and will bounce.
Update entries to Sinan's kernel.org address which is the address in
MAINTAINERS for this component.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-By: Sinan Kaya <okaya@kernel.org>
Link: https://lore.kernel.org/r/20230707195003.6619-1-quic_jhugo@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When 'mcf_edma' is allocated, some space is allocated for a
flexible array at the end of the struct. 'chans' item are allocated, that is
to say 'pdata->dma_channels'.
Then, this number of item is stored in 'mcf_edma->n_chans'.
A few lines later, if 'mcf_edma->n_chans' is 0, then a default value of 64
is set.
This ends to no space allocated by devm_kzalloc() because chans was 0, but
64 items are read and/or written in some not allocated memory.
Change the logic to define a default value before allocating the memory.
Fixes: e7a3ff92ea ("dmaengine: fsl-edma: add ColdFire mcf5441x edma support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/f55d914407c900828f6fad3ea5fa791a5f17b9a4.1685172449.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZM+bcQAKCRCRxhvAZXjc
opWnAP9Ik49607Rn3OvFhWiYQp21nJ9NTs4lp5H30gMM3KhOxQEA9YAafIRH3rMs
zYjmEBwf4FCW9XQ4QgmktsW4Y7RqggE=
=DCbd
-----END PGP SIGNATURE-----
Merge tag 'v6.5-rc5.vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a wrong check for O_TMPFILE during RESOLVE_CACHED lookup
- Clean up directory iterators and clarify file_needs_f_pos_lock()
* tag 'v6.5-rc5.vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: rely on ->iterate_shared to determine f_pos locking
vfs: get rid of old '->iterate' directory operation
proc: fix missing conversion to 'iterate_shared'
open: make RESOLVE_CACHED correctly test for O_TMPFILE
ionic_start_queues_reconfig returns an error code if txrx_init fails.
Handle this error code in the relevant places.
This fixes a corner case where the device could get left in a detached
state if the CMB reconfig fails and the attempt to clean up the mess
also fails. Note that calling netif_device_attach when the netdev is
already attached does not lead to unexpected behavior.
Change goto name "errout" to "err_out" to maintain consistency across
goto statements.
Fixes: 40bc471dc7 ("ionic: add tx/rx-push support with device Component Memory Buffers")
Fixes: 6f7d6f0fd7 ("ionic: pull reset_queues into tx_timeout handler")
Signed-off-by: Nitya Sunkad <nitya.sunkad@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case rhashtable_lookup_insert_fast() fails inside vxlan_vni_add(), the
allocated percpu vni stats are not freed on the error path.
Introduce vxlan_vni_free() which would work as a nice wrapper to free
vxlan_vni_node resources properly.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 4095e0e132 ("drivers: vxlan: vnifilter: per vni stats")
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we removed ->iterate we don't need to check for either
->iterate or ->iterate_shared in file_needs_f_pos_lock(). Simply check
for ->iterate_shared instead. This will tell us whether we need to
unconditionally take the lock. Not just does it allow us to avoid
checking f_inode's mode it also actually clearly shows that we're
locking because of readdir.
Signed-off-by: Christian Brauner <brauner@kernel.org>
All users now just use '->iterate_shared()', which only takes the
directory inode lock for reading.
Filesystems that never got convered to shared mode now instead use a
wrapper that drops the lock, re-takes it in write mode, calls the old
function, and then downgrades the lock back to read mode.
This way the VFS layer and other callers no longer need to care about
filesystems that never got converted to the modern era.
The filesystems that use the new wrapper are ceph, coda, exfat, jfs,
ntfs, ocfs2, overlayfs, and vboxsf.
Honestly, several of them look like they really could just iterate their
directories in shared mode and skip the wrapper entirely, but the point
of this change is to not change semantics or fix filesystems that
haven't been fixed in the last 7+ years, but to finally get rid of the
dual iterators.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
I'm looking at the directory handling due to the discussion about f_pos
locking (see commit 797964253d35: "file: reinstate f_pos locking
optimization for regular files"), and wanting to clean that up.
And one source of ugliness is how we were supposed to move filesystems
over to the '->iterate_shared()' function that only takes the inode lock
for reading many many years ago, but several filesystems still use the
bad old '->iterate()' that takes the inode lock for exclusive access.
See commit 6192269444 ("introduce a parallel variant of ->iterate()")
that also added some documentation stating
Old method is only used if the new one is absent; eventually it will
be removed. Switch while you still can; the old one won't stay.
and that was back in April 2016. Here we are, many years later, and the
old version is still clearly sadly alive and well.
Now, some of those old style iterators are probably just because the
filesystem may end up having per-inode mutable data that it uses for
iterating a directory, but at least one case is just a mistake.
Al switched over most filesystems to use '->iterate_shared()' back when
it was introduced. In particular, the /proc filesystem was converted as
one of the first ones in commit f50752eaa0 ("switch all procfs
directories ->iterate_shared()").
But then later one new user of '->iterate()' was then re-introduced by
commit 6d9c939dbe ("procfs: add smack subdir to attrs").
And that's clearly not what we wanted, since that new case just uses the
same 'proc_pident_readdir()' and 'proc_pident_lookup()' helper functions
that other /proc pident directories use, and they are most definitely
safe to use with the inode lock held shared.
So just fix it.
This still leaves a fair number of oddball filesystems using the
old-style directory iterator (ceph, coda, exfat, jfs, ntfs, ocfs2,
overlayfs, and vboxsf), but at least we don't have any remaining in the
core filesystems.
I'm going to add a wrapper function that just drops the read-lock and
takes it as a write lock, so that we can clean up the core vfs layer and
make all the ugly 'this filesystem needs exclusive inode locking' be
just filesystem-internal warts.
I just didn't want to make that conversion when we still had a core user
left.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
O_TMPFILE is actually __O_TMPFILE|O_DIRECTORY. This means that the old
fast-path check for RESOLVE_CACHED would reject all users passing
O_DIRECTORY with -EAGAIN, when in fact the intended test was to check
for __O_TMPFILE.
Cc: stable@vger.kernel.org # v5.12+
Fixes: 99668f6180 ("fs: expose LOOKUP_CACHED through openat2() RESOLVE_CACHED")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Message-Id: <20230806-resolve_cached-o_tmpfile-v1-1-7ba16308465e@cyphar.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Setting dev->priv_flags & IFF_SEE_ALL_HWTSTAMP_REQUESTS is only legal
for drivers which were converted to ndo_hwtstamp_get() and
ndo_hwtstamp_set(), and it is only there that we call ndo_hwtstamp_set()
for a request that otherwise goes to phylib (for stuff like packet traps,
which need to be undone if phylib failed, hence the old_cfg logic).
The problem is that we end up calling ndo_hwtstamp_get() when we don't
need to (even if the SIOCSHWTSTAMP wasn't intended for phylib, or if it
was, but the driver didn't set IFF_SEE_ALL_HWTSTAMP_REQUESTS). For those
unnecessary conditions, we share a code path with virtual drivers (vlan,
macvlan, bonding) where ndo_hwtstamp_get() is implemented as
generic_hwtstamp_get_lower(), and may be resolved through
generic_hwtstamp_ioctl_lower() if the lower device is unconverted.
I.e. this situation:
$ ip link add link eno0 name eno0.100 type vlan id 100
$ hwstamp_ctl -i eno0.100 -t 1
We are unprepared to deal with this, because if ndo_hwtstamp_get() is
resolved through a legacy ndo_eth_ioctl(SIOCGHWTSTAMP) lower_dev
implementation, that needs a non-NULL old_cfg.ifr pointer, and we don't
have it.
But we don't even need to deal with it either. In the general case,
drivers may not even implement SIOCGHWTSTAMP handling, only SIOCSHWTSTAMP,
so it makes sense to completely avoid a SIOCGHWTSTAMP call if we can.
The solution is to split the single "if" condition into 3 smaller ones,
thus separating the decision to call ndo_hwtstamp_get() from the
decision to call ndo_hwtstamp_set(). The third "if" condition is
identical to the first one, and both are subsets of the second one.
Thus, the "cfg" argument of kernel_hwtstamp_config_changed() is always
valid.
Reported-by: Eric Dumazet <edumazet@google.com>
Closes: https://lore.kernel.org/netdev/CANn89iLOspJsvjPj+y8jikg7erXDomWe8sqHMdfL_2LQSFrPAg@mail.gmail.com/
Fixes: fd770e856e ("net: remove phy_has_hwtstamp() -> phy_mii_ioctl() decision from converted drivers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use eth_broadcast_addr() to assign broadcast address instead
of memset().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
gcc with W=1 reports
drivers/net/ethernet/ibm/ibmvnic.c:194:13: warning: variable 'rc' set but not used [-Wunused-but-set-variable]
^
This variable is not used so remove it.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308040609.zQsSXWXI-lkp@intel.com/
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Reviewed-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot/KCSAN reported data-races in macsec whenever dev->stats fields
are updated.
It appears all of these updates can happen from multiple cpus.
Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.
Fixes: c09440f7dc ("macsec: introduce IEEE 802.1AE driver")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add page pool for RX buffers for faster buffer cycle and reduce CPU
usage.
The standard page pool API is used.
With iperf and 128 threads test, this patch improved the throughput
by 12-15%, and decreased the IRQ associated CPU's usage from 99-100% to
10-50%.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rushil Gupta says:
====================
gve: Add QPL mode for DQO descriptor format
GVE supports QPL ("queue-page-list") mode where
all data is communicated through a set of pre-registered
pages. Adding this mode to DQO.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a note about QPL and RDA mode
Signed-off-by: Rushil Gupta <rushilg@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Bailey Forrest <bcf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RX path allocates the QPL page pool at queue creation, and
tries to reuse these pages through page recycling. This patch
ensures that on refill no non-QPL pages are posted to the device.
When the driver is running low on free buffers, an ondemand
allocation step kicks in that allocates a non-qpl page for
SKB business to free up the QPL page in use.
gve_try_recycle_buf was moved to gve_rx_append_frags so that driver does
not attempt to mark buffer as used if a non-qpl page was allocated
ondemand.
Signed-off-by: Rushil Gupta <rushilg@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Bailey Forrest <bcf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each QPL page is divided into GVE_TX_BUFS_PER_PAGE_DQO buffers.
When a packet needs to be transmitted, we break the packet into max
GVE_TX_BUF_SIZE_DQO sized chunks and transmit each chunk using a TX
descriptor.
We allocate the TX buffers from the free list in dqo_tx.
We store these TX buffer indices in an array in the pending_packet
structure.
The TX buffers are returned to the free list in dqo_compl after
receiving packet completion or when removing packets from miss
completions list.
Signed-off-by: Rushil Gupta <rushilg@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Bailey Forrest <bcf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
GVE supports QPL ("queue-page-list") mode where
all data is communicated through a set of pre-registered
pages. Adding this mode to DQO descriptor format.
Add checks, abi-changes and device options to support
QPL mode for DQO in addition to GQI. Also, use
pages-per-qpl supplied by device-option to control the
size of the "queue-page-list".
Signed-off-by: Rushil Gupta <rushilg@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Bailey Forrest <bcf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TLS records end with a 16B tag. For TLS device offload we only
need to make space for this tag in the stream, the device will
generate and replace it with the actual calculated tag.
Long time ago the code would just re-reference the head frag
which mostly worked but was suboptimal because it prevented TCP
from combining the record into a single skb frag. I'm not sure
if it was correct as the first frag may be shorter than the tag.
The commit under fixes tried to replace that with using the page
frag and if the allocation failed rolling back the data, if record
was long enough. It achieves better fragment coalescing but is
also buggy.
We don't roll back the iterator, so unless we're at the end of
send we'll skip the data we designated as tag and start the
next record as if the rollback never happened.
There's also the possibility that the record was constructed
with MSG_MORE and the data came from a different syscall and
we already told the user space that we "got it".
Allocate a single dummy page and use it as fallback.
Found by code inspection, and proven by forcing allocation
failures.
Fixes: e7b159a48b ("net/tls: remove the record tail optimization")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
tcp: set few options locklessly
This series is avoiding the socket lock for six TCP options.
They are not heavily used, but this exercise can give
ideas for other parts of TCP/IP stack :)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
rskq_defer_accept field can be read/written without
the need of holding the socket lock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tp->linger2 can be set locklessly as long as readers
use READ_ONCE().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tp->keepalive_probes can be set locklessly, readers
are already taking care of this field being potentially
set by other threads.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tp->keepalive_intvl can be set locklessly, readers
are already taking care of this field being potentially
set by other threads.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
icsk->icsk_user_timeout can be set locklessly,
if all read sides use READ_ONCE().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
icsk->icsk_syn_retries can safely be set without locking the socket.
We have to add READ_ONCE() annotations in tcp_fastopen_synack_timer()
and tcp_write_timeout().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are multiple smb2_ea_info buffers in FILE_FULL_EA_INFORMATION request
from client. ksmbd find next smb2_ea_info using ->NextEntryOffset of
current smb2_ea_info. ksmbd need to validate buffer length Before
accessing the next ea. ksmbd should check buffer length using buf_len,
not next variable. next is the start offset of current ea that got from
previous ea.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21598
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In commit 2b9b8f3b68 ("ksmbd: validate command payload size"), except
for SMB2_OPLOCK_BREAK_HE command, the request size of other commands
is not checked, it's not expected. Fix it by add check for request
size of other commands.
Cc: stable@vger.kernel.org
Fixes: 2b9b8f3b68 ("ksmbd: validate command payload size")
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Long Li <leo.lilong@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
- Prevent the scsi disk driver from issuing a START STOP UNIT command
for ATA devices during system resume as this causes various issues
reported by multiple users.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZM73RgAKCRDdoc3SxdoY
dng8AP4qmIrU9K95uy7S9Ix8aMJj0HCWvFlBr6Evh8kpyEw7HgD/SHHlvbYg+g8n
lD9/JWRzpHkHl5XM8DqWyKSvi906pgM=
=m3pD
-----END PGP SIGNATURE-----
Merge tag 'ata-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fix from Damien Le Moal:
- Prevent the scsi disk driver from issuing a START STOP UNIT command
for ATA devices during system resume as this causes various issues
reported by multiple users.
* tag 'ata-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata,scsi: do not issue START STOP UNIT on resume
-----BEGIN PGP SIGNATURE-----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=AY3g
-----END PGP SIGNATURE-----
Merge tag '6.5-rc4-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fix from Steve French:
- Fix DFS interlink problem (different namespace)
* tag '6.5-rc4-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix dfs link mount against w2k8
- Fix vmemmap altmap boundary check which could cause memory hotunplug failure.
- Create a dummy stackframe to fix ftrace stack unwind.
- Fix secondary thread bringup for Book3E ELFv2 kernels.
- Use early_ioremap/unmap() in via_calibrate_decr().
Thanks to: Aneesh Kumar K.V, Benjamin Gray, Christophe Leroy, David Hildenbrand,
Naveen N Rao.
-----BEGIN PGP SIGNATURE-----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=a6as
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix vmemmap altmap boundary check which could cause memory hotunplug
failure
- Create a dummy stackframe to fix ftrace stack unwind
- Fix secondary thread bringup for Book3E ELFv2 kernels
- Use early_ioremap/unmap() in via_calibrate_decr()
Thanks to Aneesh Kumar K.V, Benjamin Gray, Christophe Leroy, David
Hildenbrand, and Naveen N Rao.
* tag 'powerpc-6.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powermac: Use early_* IO variants in via_calibrate_decr()
powerpc/64e: Fix secondary thread bringup for ELFv2 kernels
powerpc/ftrace: Create a dummy stackframe to fix stack unwind
powerpc/mm/altmap: Fix altmap boundary check
- early fixmap preallocation to fix boot failures on kernel >= 6.4
- remove DMA leftover code in parport_gsc
- drop old comments and code style fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZM3hwQAKCRD3ErUQojoP
Xyp7AP9i7NNVAjyRoTdTUWGWncfrS5bLL+TYWdPjKPfLJh0tPQEAl4zcC+gbTQgV
SgeWecV+CbLcNX+Pmpa5bKHBIg6SBAM=
=A00f
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- early fixmap preallocation to fix boot failures on kernel >= 6.4
- remove DMA leftover code in parport_gsc
- drop old comments and code style fixes
* tag 'parisc-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: unaligned: Add required spaces after ','
parport: gsc: remove DMA leftover code
parisc: pci-dma: remove unused and dead EISA code and comment
parisc/mm: preallocate fixmap page tables at init
- Change a usleep() to udelay() to avoid scheduling while atomic
in the Amlogic PLL code
- Revert a patch to the Mediatek MT8183 driver that caused an
out-of-bounds write
- Return the right error value when devm_of_iomap() fails in
imx93_clocks_probe()
- Constrain the Kconfig for the fixed mmio clk so that it depends on
HAS_IOMEM and can't be compiled on architectures such as s390
-----BEGIN PGP SIGNATURE-----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=eROl
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A few clk driver fixes for some SoC clk drivers:
- Change a usleep() to udelay() to avoid scheduling while atomic in
the Amlogic PLL code
- Revert a patch to the Mediatek MT8183 driver that caused an
out-of-bounds write
- Return the right error value when devm_of_iomap() fails in
imx93_clocks_probe()
- Constrain the Kconfig for the fixed mmio clk so that it depends on
HAS_IOMEM and can't be compiled on architectures such as s390"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: fixed-mmio: make COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM
clk: imx93: Propagate correct error in imx93_clocks_probe()
clk: mediatek: mt8183: Add back SSPM related clocks
clk: meson: change usleep_range() to udelay() for atomic context
The first pull request for v6.6 and only driver patches this time.
Nothing special really standing out, it has been quiet most likely due
to vacations.
Major changes:
rtl8xxxu
* enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU), RTL8192EU and RTL8723BU
mwifiex
* allow moving to a different namespace
mt76
* preparation for mt7925 support
* mt7981 support
ath12k
* Extremely High Throughput (EHT) PHY support for Wi-Fi 7
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmTM6gkRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuuAggAjRQi7Vjsfr+GlZ+g/y/vf+ircw8YjKgy
wJqnQ0fnJ4rpyxqVFjMr+ocuOrdBufTSs/W4fqOBbbg9oimsgg+vxIQA8GmQIUVQ
ZQVWQHVqPLQ6NVp/YZJnt9seeCewGHW6UZxG9k0MqR1RJn+KinmSjWKRo1D56niL
rJQAK0FWrVqkj5nt9lKRJLMGxX0k/ftrdZgHanUOVCNYi9Ukx0jXSbqSMftTk7xz
r3jtuY5zAV+2GXoMIbW4ogBks4Yx06XzVycByzj+dYt5E3VBdDFX+mXlsw9vnjbv
whVzsuMnYBu6CCFlKDPdGsmrzZA0GrLCRZE9uw7yhwZZ+qKkQZ8kNw==
=5r3T
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.6
The first pull request for v6.6 and only driver patches this time.
Nothing special really standing out, it has been quiet most likely due
to vacations.
Major changes:
rtl8xxxu
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
mwifiex
- allow moving to a different namespace
mt76
- preparation for mt7925 support
- mt7981 support
ath12k
- Extremely High Throughput (EHT) PHY support for Wi-Fi 7
* tag 'wireless-next-2023-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (172 commits)
wifi: rtw89: return failure if needed firmware elements are not recognized
wifi: rtw89: add to parse firmware elements of BB and RF tables
wifi: rtw89: introduce infrastructure of firmware elements
wifi: rtw89: add firmware suit for BB MCU 0/1
wifi: rtw89: add firmware parser for v1 format
wifi: rtw89: introduce v1 format of firmware header
wifi: rtw89: support firmware log with formatted text
wifi: rtw89: recognize log format from firmware file
wifi: ath12k: avoid deadlock by change ieee80211_queue_work for regd_update_work
wifi: ath12k: add handler for scan event WMI_SCAN_EVENT_DEQUEUED
wifi: ath12k: relax list iteration in ath12k_mac_vif_unref()
wifi: ath12k: configure puncturing bitmap
wifi: ath12k: parse WMI service ready ext2 event
wifi: ath12k: add MLO header in peer association
wifi: ath12k: peer assoc for 320 MHz
wifi: ath12k: add WMI support for EHT peer
wifi: ath12k: prepare EHT peer assoc parameters
wifi: ath12k: add EHT PHY modes
wifi: ath12k: propagate EHT capabilities to userspace
wifi: ath12k: WMI support to process EHT capabilities
...
====================
Link: https://lore.kernel.org/r/87msz7j942.fsf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
tcp: Disable header prediction for MD5.
The 1st patch disable header prediction for MD5 flow and the 2nd
patch updates the stale comment in tcp_parse_options().
====================
Link: https://lore.kernel.org/r/20230803224552.69398-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 9ea88a1530 ("tcp: md5: check md5 signature without socket
lock"), the MD5 option is checked in tcp_v[46]_rcv().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230803224552.69398-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP socket saves the minimum required header length in tcp_header_len
of struct tcp_sock, and later the value is used in __tcp_fast_path_on()
to generate a part of TCP header in tcp_sock(sk)->pred_flags.
In tcp_rcv_established(), if the incoming packet has the same pattern
with pred_flags, we enter the fast path and skip full option parsing.
The MD5 option is parsed in tcp_v[46]_rcv(), so we need not parse it
again later in tcp_rcv_established() unless other options exist. We
add TCPOLEN_MD5SIG_ALIGNED to tcp_header_len in two paths to avoid the
slow path.
For passive open connections with MD5, we add TCPOLEN_MD5SIG_ALIGNED
to tcp_header_len in tcp_create_openreq_child() after 3WHS.
On the other hand, we do it in tcp_connect_init() for active open
connections. However, the value is overwritten while processing
SYN+ACK or crossed SYN in tcp_rcv_synsent_state_process().
These two cases will have the wrong value in pred_flags and never go
into the fast path.
We could update tcp_header_len in tcp_rcv_synsent_state_process(), but
a test with slightly modified netperf which uses MD5 for each flow shows
that the slow path is actually a bit faster than the fast path.
On c5.4xlarge EC2 instance (16 vCPU, 32 GiB mem)
$ for i in {1..10}; do
./super_netperf $(nproc) -H localhost -l 10 -- -m 256 -M 256;
done
Avg of 10
* 36e68eadd3 : 10.376 Gbps
* all fast path : 10.374 Gbps (patch v2, See Link)
* all slow path : 10.394 Gbps
The header prediction is not worth adding complexity for MD5, so let's
disable it for MD5.
Link: https://lore.kernel.org/netdev/20230803042214.38309-1-kuniyu@amazon.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230803224552.69398-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dccp_sendmsg() reads dp->dccps_mss_cache before locking the socket.
Same thing in do_dccp_getsockopt().
Add READ_ONCE()/WRITE_ONCE() annotations,
and change dccp_sendmsg() to check again dccps_mss_cache
after socket is locked.
Fixes: 7c657876b6 ("[DCCP]: Initial implementation")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230803163021.2958262-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: more fixes for v6.5
Here is a new batch of fixes related to MPTCP for v6.5 and older.
Patches 1 and 2 fix issues with MPTCP Join selftest when manually
launched with '-i' parameter to use 'ip mptcp' tool instead of the
dedicated one (pm_nl_ctl). The issues have been there since v5.18.
Thank you Andrea for your first contributions to MPTCP code in the
upstream kernel!
Patch 3 avoids corrupting the data stream when trying to reset
connections that have fallen back to TCP. This can happen from v6.1.
Patch 4 fixes a race when doing a disconnect() and an accept() in
parallel on a listener socket. The issue only happens in rare cases if
the user is really unlucky since a fix that landed in v6.3 but
backported up to v6.1.
====================
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-0-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Despite commit 0ad529d9fd ("mptcp: fix possible divide by zero in
recvmsg()"), the mptcp protocol is still prone to a race between
disconnect() (or shutdown) and accept.
The root cause is that the mentioned commit checks the msk-level
flag, but mptcp_stream_accept() does acquire the msk-level lock,
as it can rely directly on the first subflow lock.
As reported by Christoph than can lead to a race where an msk
socket is accepted after that mptcp_subflow_queue_clean() releases
the listener socket lock and just before it takes destructive
actions leading to the following splat:
BUG: kernel NULL pointer dereference, address: 0000000000000012
PGD 5a4ca067 P4D 5a4ca067 PUD 37d4c067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 2 PID: 10955 Comm: syz-executor.5 Not tainted 6.5.0-rc1-gdc7b257ee5dd #37
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:mptcp_stream_accept+0x1ee/0x2f0 include/net/inet_sock.h:330
Code: 0a 09 00 48 8b 1b 4c 39 e3 74 07 e8 bc 7c 7f fe eb a1 e8 b5 7c 7f fe 4c 8b 6c 24 08 eb 05 e8 a9 7c 7f fe 49 8b 85 d8 09 00 00 <0f> b6 40 12 88 44 24 07 0f b6 6c 24 07 bf 07 00 00 00 89 ee e8 89
RSP: 0018:ffffc90000d07dc0 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff888037e8d020 RCX: ffff88803b093300
RDX: 0000000000000000 RSI: ffffffff833822c5 RDI: ffffffff8333896a
RBP: 0000607f82031520 R08: ffff88803b093300 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000003e83 R12: ffff888037e8d020
R13: ffff888037e8c680 R14: ffff888009af7900 R15: ffff888009af6880
FS: 00007fc26d708640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000012 CR3: 0000000066bc5001 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
do_accept+0x1ae/0x260 net/socket.c:1872
__sys_accept4+0x9b/0x110 net/socket.c:1913
__do_sys_accept4 net/socket.c:1954 [inline]
__se_sys_accept4 net/socket.c:1951 [inline]
__x64_sys_accept4+0x20/0x30 net/socket.c:1951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Address the issue by temporary removing the pending request socket
from the accept queue, so that racing accept() can't touch them.
After depleting the msk - the ssk still exists, as plain TCP sockets,
re-insert them into the accept queue, so that later inet_csk_listen_stop()
will complete the tcp socket disposal.
Fixes: 2a6a870e44 ("mptcp: stops worker on unaccepted sockets at listener close")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/423
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-4-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the blamed commit, the MPTCP protocol unconditionally sends
TCP resets on all the subflows on disconnect().
That fits full-blown MPTCP sockets - to implement the fastclose
mechanism - but causes unexpected corruption of the data stream,
caught as sporadic self-tests failures.
Fixes: d21f834855 ("mptcp: use fastclose on more edge scenarios")
Cc: stable@vger.kernel.org
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/419
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-3-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_join 'implicit EP' test currently fails when using ip mptcp:
$ ./mptcp_join.sh -iI
<snip>
001 implicit EP creation[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 '
Error: too many addresses or duplicate one: -22.
ID change is prevented[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 '
modif is allowed[fail] expected '10.0.2.2 10.0.2.2 id 1 signal' found '10.0.2.2 id 1 signal '
This happens because of two reasons:
- iproute v6.3.0 does not support the implicit flag, fixed with
iproute2-next commit 3a2535a41854 ("mptcp: add support for implicit
flag")
- pm_nl_check_endpoint wrongly expects the ip address to be repeated two
times in iproute output, and does not account for a final whitespace
in it.
This fixes the issue trimming the whitespace in the output string and
removing the double address in the expected string.
Fixes: 69c6ce7b6e ("selftests: mptcp: add implicit endpoint test case")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-2-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_join 'delete and re-add' test fails when using ip mptcp:
$ ./mptcp_join.sh -iI
<snip>
002 delete and re-add before delete[ ok ]
mptcp_info subflows=1 [ ok ]
Error: argument "ADDRESS" is wrong: invalid for non-zero id address
after delete[fail] got 2:2 subflows expected 1
This happens because endpoint delete includes an ip address while id is
not 0, contrary to what is indicated in the ip mptcp man page:
"When used with the delete id operation, an IFADDR is only included when
the ID is 0."
This fixes the issue using the $addr variable in pm_nl_del_endpoint()
only when id is 0.
Fixes: 34aa6e3bcc ("selftests: mptcp: add ip mptcp wrappers")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-1-6671b1ab11cc@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move marking the PHY as being on a SFP module into the SFP code between
getting the PHY device (and thus initialising the phy_device structure)
and registering the discovered device.
This means that PHY drivers can use phy_on_sfp() in their match and
get_features methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qRaga-001vKt-8X@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Florian Westphal says:
====================
tunnels: fix ipv4 pmtu icmp checksum
The checksum of the generated ipv4 icmp pmtud message is
only correct if the skb that causes the icmp error generation
is linear.
Fix this and add a selftest for this.
====================
Link: https://lore.kernel.org/r/20230803152653.29535-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP might get stuck if a nonlinear skb exceeds the path MTU,
icmp error contains an incorrect icmp checksum in that case.
Extend the existing test for vxlan to also send at least 1MB worth of
data via TCP in addition to the existing 'large icmp packet adds
route exception'.
On my test VM this fails due to 0-size output file without
"tunnels: fix kasan splat when generating ipv4 pmtu error".
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230803152653.29535-3-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
