Siddharth Vadapalli says:
====================
Add support for J784S4 CPSW9G
This series adds a new compatible to am65-cpsw driver for the CPSW9G
instance of the CPSW Ethernet Switch on TI's J784S4 SoC which has 8
external ports and 1 internal host port.
The CPSW9G instance supports QSGMII and USXGMII modes for which driver
support is added.
Additionally, the interface mode specific configurations are moved to the
am65_cpsw_nuss_mac_config() callback. Also, a TODO comment is added for
verifying whether in-band mode is necessary for 10 Mbps RGMII mode.
NOTE:
I have verified that the mac_config() operations are preserved across
link up and link down events for SGMII and USXGMII mode with the new
implementation in this series, as suggested by:
Russell King <linux@armlinux.org.uk>
For patches 1 and 3 of this series, I believe that the following tag:
Suggested-by: Russell King <linux@armlinux.org.uk>
should be added. However, I did not add it since I did not yet get
the permission to do so. I will be happy if the tags are added, since
the new implementation is almost entirely based on Russell's suggestion,
with minor changes made by me.
v2:
https://lore.kernel.org/r/20230403110106.983994-1-s-vadapalli@ti.com/
v1:
https://lore.kernel.org/r/20230331065110.604516-1-s-vadapalli@ti.com/
====================
Link: https://lore.kernel.org/r/20230404061459.1100519-1-s-vadapalli@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TI's J784S4 SoC supports USXGMII mode. Add USXGMII mode to the
extra_modes member of the J784S4 SoC data.
Configure MAC control register for supporting USXGMII mode and add
MAC_5000FD in the "mac_capabilities" member of struct "phylink_config".
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TI's J784S4 SoC supports QSGMII mode with the CPSW9G instance of the
CPSW Ethernet Switch. Add a new compatible for J784S4 SoC and enable
QSGMII support for it by adding QSGMII mode to the extra_modes member of
the "j784s4_cpswxg_pdata" SoC data.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the interface mode specific configuration to the mac_config()
callback am65_cpsw_nuss_mac_config().
Also, do not reset the MAC Control register on mac_link_down(). Only
clear those bits that can possibly be set in mac_link_up().
Let the MAC remain in IDLE state after mac_link_down(). Bring it out of
the IDLE state on mac_link_up().
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
assume the following setup on a single machine:
1. An openvswitch instance with one bridge and default flows
2. two network namespaces "server" and "client"
3. two ovs interfaces "server" and "client" on the bridge
4. for each ovs interface a veth pair with a matching name and 32 rx and
tx queues
5. move the ends of the veth pairs to the respective network namespaces
6. assign ip addresses to each of the veth ends in the namespaces (needs
to be the same subnet)
7. start some http server on the server network namespace
8. test if a client in the client namespace can reach the http server
when following the actions below the host has a chance of getting a cpu
stuck in a infinite loop:
1. send a large amount of parallel requests to the http server (around
3000 curls should work)
2. in parallel delete the network namespace (do not delete interfaces or
stop the server, just kill the namespace)
there is a low chance that this will cause the below kernel cpu stuck
message. If this does not happen just retry.
Below there is also the output of bpftrace for the functions mentioned
in the output.
The series of events happening here is:
1. the network namespace is deleted calling
`unregister_netdevice_many_notify` somewhere in the process
2. this sets first `NETREG_UNREGISTERING` on both ends of the veth and
then runs `synchronize_net`
3. it then calls `call_netdevice_notifiers` with `NETDEV_UNREGISTER`
4. this is then handled by `dp_device_event` which calls
`ovs_netdev_detach_dev` (if a vport is found, which is the case for
the veth interface attached to ovs)
5. this removes the rx_handlers of the device but does not prevent
packages to be sent to the device
6. `dp_device_event` then queues the vport deletion to work in
background as a ovs_lock is needed that we do not hold in the
unregistration path
7. `unregister_netdevice_many_notify` continues to call
`netdev_unregister_kobject` which sets `real_num_tx_queues` to 0
8. port deletion continues (but details are not relevant for this issue)
9. at some future point the background task deletes the vport
If after 7. but before 9. a packet is send to the ovs vport (which is
not deleted at this point in time) which forwards it to the
`dev_queue_xmit` flow even though the device is unregistering.
In `skb_tx_hash` (which is called in the `dev_queue_xmit`) path there is
a while loop (if the packet has a rx_queue recorded) that is infinite if
`dev->real_num_tx_queues` is zero.
To prevent this from happening we update `do_output` to handle devices
without carrier the same as if the device is not found (which would
be the code path after 9. is done).
Additionally we now produce a warning in `skb_tx_hash` if we will hit
the infinite loop.
bpftrace (first word is function name):
__dev_queue_xmit server: real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1
netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 2, reg_state: 1
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 6, reg_state: 2
ovs_netdev_detach_dev server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, reg_state: 2
netdev_rx_handler_unregister server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
netdev_rx_handler_unregister ret server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 27, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 22, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 18, reg_state: 2
netdev_unregister_kobject: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
ovs_vport_send server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
__dev_queue_xmit server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
broken device server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024
ovs_dp_detach_port server: real_num_tx_queues: 0 cpu 9, pid: 9124, tid: 9124, reg_state: 2
synchronize_rcu_expedited: cpu 9, pid: 33604, tid: 33604
stuck message:
watchdog: BUG: soft lockup - CPU#5 stuck for 26s! [curl:1929279]
Modules linked in: veth pktgen bridge stp llc ip_set_hash_net nft_counter xt_set nft_compat nf_tables ip_set_hash_ip ip_set nfnetlink_cttimeout nfnetlink openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 tls binfmt_misc nls_iso8859_1 input_leds joydev serio_raw dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua sch_fq_codel drm efi_pstore virtio_rng ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel virtio_net ahci net_failover crypto_simd cryptd psmouse libahci virtio_blk failover
CPU: 5 PID: 1929279 Comm: curl Not tainted 5.15.0-67-generic #74-Ubuntu
Hardware name: OpenStack Foundation OpenStack Nova, BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:netdev_pick_tx+0xf1/0x320
Code: 00 00 8d 48 ff 0f b7 c1 66 39 ca 0f 86 e9 01 00 00 45 0f b7 ff 41 39 c7 0f 87 5b 01 00 00 44 29 f8 41 39 c7 0f 87 4f 01 00 00 <eb> f2 0f 1f 44 00 00 49 8b 94 24 28 04 00 00 48 85 d2 0f 84 53 01
RSP: 0018:ffffb78b40298820 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff9c8773adc2e0 RCX: 000000000000083f
RDX: 0000000000000000 RSI: ffff9c8773adc2e0 RDI: ffff9c870a25e000
RBP: ffffb78b40298858 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff9c870a25e000
R13: ffff9c870a25e000 R14: ffff9c87fe043480 R15: 0000000000000000
FS: 00007f7b80008f00(0000) GS:ffff9c8e5f740000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7b80f6a0b0 CR3: 0000000329d66000 CR4: 0000000000350ee0
Call Trace:
<IRQ>
netdev_core_pick_tx+0xa4/0xb0
__dev_queue_xmit+0xf8/0x510
? __bpf_prog_exit+0x1e/0x30
dev_queue_xmit+0x10/0x20
ovs_vport_send+0xad/0x170 [openvswitch]
do_output+0x59/0x180 [openvswitch]
do_execute_actions+0xa80/0xaa0 [openvswitch]
? kfree+0x1/0x250
? kfree+0x1/0x250
? kprobe_perf_func+0x4f/0x2b0
? flow_lookup.constprop.0+0x5c/0x110 [openvswitch]
ovs_execute_actions+0x4c/0x120 [openvswitch]
ovs_dp_process_packet+0xa1/0x200 [openvswitch]
? ovs_ct_update_key.isra.0+0xa8/0x120 [openvswitch]
? ovs_ct_fill_key+0x1d/0x30 [openvswitch]
? ovs_flow_key_extract+0x2db/0x350 [openvswitch]
ovs_vport_receive+0x77/0xd0 [openvswitch]
? __htab_map_lookup_elem+0x4e/0x60
? bpf_prog_680e8aff8547aec1_kfree+0x3b/0x714
? trace_call_bpf+0xc8/0x150
? kfree+0x1/0x250
? kfree+0x1/0x250
? kprobe_perf_func+0x4f/0x2b0
? kprobe_perf_func+0x4f/0x2b0
? __mod_memcg_lruvec_state+0x63/0xe0
netdev_port_receive+0xc4/0x180 [openvswitch]
? netdev_port_receive+0x180/0x180 [openvswitch]
netdev_frame_hook+0x1f/0x40 [openvswitch]
__netif_receive_skb_core.constprop.0+0x23d/0xf00
__netif_receive_skb_one_core+0x3f/0xa0
__netif_receive_skb+0x15/0x60
process_backlog+0x9e/0x170
__napi_poll+0x33/0x180
net_rx_action+0x126/0x280
? ttwu_do_activate+0x72/0xf0
__do_softirq+0xd9/0x2e7
? rcu_report_exp_cpu_mult+0x1b0/0x1b0
do_softirq+0x7d/0xb0
</IRQ>
<TASK>
__local_bh_enable_ip+0x54/0x60
ip_finish_output2+0x191/0x460
__ip_finish_output+0xb7/0x180
ip_finish_output+0x2e/0xc0
ip_output+0x78/0x100
? __ip_finish_output+0x180/0x180
ip_local_out+0x5e/0x70
__ip_queue_xmit+0x184/0x440
? tcp_syn_options+0x1f9/0x300
ip_queue_xmit+0x15/0x20
__tcp_transmit_skb+0x910/0x9c0
? __mod_memcg_state+0x44/0xa0
tcp_connect+0x437/0x4e0
? ktime_get_with_offset+0x60/0xf0
tcp_v4_connect+0x436/0x530
__inet_stream_connect+0xd4/0x3a0
? kprobe_perf_func+0x4f/0x2b0
? aa_sk_perm+0x43/0x1c0
inet_stream_connect+0x3b/0x60
__sys_connect_file+0x63/0x70
__sys_connect+0xa6/0xd0
? setfl+0x108/0x170
? do_fcntl+0xe8/0x5a0
__x64_sys_connect+0x18/0x20
do_syscall_64+0x5c/0xc0
? __x64_sys_fcntl+0xa9/0xd0
? exit_to_user_mode_prepare+0x37/0xb0
? syscall_exit_to_user_mode+0x27/0x50
? do_syscall_64+0x69/0xc0
? __sys_setsockopt+0xea/0x1e0
? exit_to_user_mode_prepare+0x37/0xb0
? syscall_exit_to_user_mode+0x27/0x50
? __x64_sys_setsockopt+0x1f/0x30
? do_syscall_64+0x69/0xc0
? irqentry_exit+0x1d/0x30
? exc_page_fault+0x89/0x170
entry_SYSCALL_64_after_hwframe+0x61/0xcb
RIP: 0033:0x7f7b8101c6a7
Code: 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 18 89 54 24 0c 48 89 34 24 89
RSP: 002b:00007ffffd6b2198 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7b8101c6a7
RDX: 0000000000000010 RSI: 00007ffffd6b2360 RDI: 0000000000000005
RBP: 0000561f1370d560 R08: 00002795ad21d1ac R09: 0030312e302e302e
R10: 00007ffffd73f080 R11: 0000000000000246 R12: 0000561f1370c410
R13: 0000000000000000 R14: 0000000000000005 R15: 0000000000000000
</TASK>
Fixes: 7f8a436eaa ("openvswitch: Add conntrack action")
Co-developed-by: Luca Czesla <luca.czesla@mail.schwarz>
Signed-off-by: Luca Czesla <luca.czesla@mail.schwarz>
Signed-off-by: Felix Huettner <felix.huettner@mail.schwarz>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZC0pBXBAgh7c76CA@kernel-bug-kernel-bug
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZDCaHgAKCRDbK58LschI
g2CXAP9sgjqCaRhfSSYWbESKWxokJAa1j6v7phNjR9iqHrBjzwEAg6aDHOUqcYpD
Zlp/5JV9HIkc1wTmuIUuI74YAVZBJAU=
=V2jo
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-04-08
We've added 4 non-merge commits during the last 11 day(s) which contain
a total of 5 files changed, 39 insertions(+), 6 deletions(-).
The main changes are:
1) Fix BPF TCP socket iterator to use correct helper for dropping
socket's refcount, that is, sock_gen_put instead of sock_put,
from Martin KaFai Lau.
2) Fix a BTI exception splat in BPF trampoline-generated code on arm64,
from Xu Kuohai.
3) Fix a LongArch JIT error from missing BPF_NOSPEC no-op, from George Guo.
4) Fix dynamic XDP feature detection of veth in xdp_redirect selftest,
from Lorenzo Bianconi.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: fix xdp_redirect xdp-features selftest for veth driver
bpf, arm64: Fixed a BTI error on returning to patched function
LoongArch, bpf: Fix jit to skip speculation barrier opcode
bpf: tcp: Use sock_gen_put instead of sock_put in bpf_iter_tcp
====================
Link: https://lore.kernel.org/r/20230407224642.30906-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following example forces veristat to loop indefinitely:
$ cat two-ok
file_name,prog_name,verdict,total_states
file-a,a,success,12
file-b,b,success,67
$ cat add-failure
file_name,prog_name,verdict,total_states
file-a,a,success,12
file-b,b,success,67
file-b,c,failure,32
$ veristat -C two-ok add-failure
<does not return>
The loop is caused by handle_comparison_mode() not checking if `base`
variable points to `fallback_stats` prior advancing joined results
using `base`.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230407154125.896927-1-eddyz87@gmail.com
After commit d6e6286a12 ("libbpf: disassociate section handler on explicit
bpf_program__set_type() call"), bpf_program__set_type() will force cleanup
the program's SEC() definition, this commit fixed the test helper but missed
the bpftool, which leads to bpftool prog autoattach broken as follows:
$ bpftool prog load spi-xfer-r1v1.o /sys/fs/bpf/test autoattach
Program spi_xfer_r1v1 does not support autoattach, falling back to pinning
This patch fix bpftool to set program type only if it differs.
Fixes: d6e6286a12 ("libbpf: disassociate section handler on explicit bpf_program__set_type() call")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230407081427.2621590-1-weiyongjun@huaweicloud.com
perf_event with type=PERF_TYPE_RAW and config=0x1b00 turned out to be not
reliable in ensuring LBR is active. Thus, test_progs:get_branch_snapshot is
not reliable in some systems. Replace it with PERF_COUNT_HW_CPU_CYCLES
event, which gives more consistent results.
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230407190130.2093736-1-song@kernel.org
- fix irq handling in gpio-davinci
- fix Kconfig dependencies for gpio-regmap
-----BEGIN PGP SIGNATURE-----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=ZM6C
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix irq handling in gpio-davinci
- fix Kconfig dependencies for gpio-regmap
* tag 'gpio-fixes-for-v6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: davinci: Add irq chip flag to skip set wake
gpio: davinci: Do not clear the bank intr enable bit in save_context
gpio: GPIO_REGMAP: select REGMAP instead of depending on it
Fix the ACPI backlight override mechanism for the cases when
acpi_backlight=video is set through the kernel command line or a DMI
quirk and add backlight quirks for Apple iMac14,1 and iMac14,2 and
Lenovo ThinkPad W530 (Hans de Goede).
-----BEGIN PGP SIGNATURE-----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=NpWd
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Fix the ACPI backlight override mechanism for the cases when
acpi_backlight=video is set through the kernel command line or a DMI
quirk and add backlight quirks for Apple iMac14,1 and iMac14,2 and
Lenovo ThinkPad W530 (Hans de Goede)"
* tag 'acpi-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Add acpi_backlight=video quirk for Lenovo ThinkPad W530
ACPI: video: Add acpi_backlight=video quirk for Apple iMac14,1 and iMac14,2
ACPI: video: Make acpi_backlight=video work independent from GPU driver
ACPI: video: Add auto_detect arg to __acpi_video_get_backlight_type()
-----BEGIN PGP SIGNATURE-----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=xypJ
-----END PGP SIGNATURE-----
Merge tag '6.3-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
"Four fixes, three for stable:
- slab out of bounds fix
- lock cancellation fix
- minor cleanup to address clang warning
- fix for xfstest 551 (wrong parms passed to kvmalloc)"
* tag '6.3-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix slab-out-of-bounds in init_smb2_rsp_hdr
ksmbd: delete asynchronous work from list
ksmbd: remove unused is_char_allowed function
ksmbd: do not call kvmalloc() with __GFP_NORETRY | __GFP_NO_WARN
The VLAN filters info is currently being held in a list and 2 bitmaps
(active_cvlans and active_svlans). We are experiencing some racing where
data is not in sync in the list and bitmaps. For example, the VLAN is
initially added to the list but only when the PF replies, it is added to
the bitmap. If a user adds many V2 VLANS before the PF responds:
while [ $((i++)) ]
ip l add l eth0 name eth0.$i type vlan id $i
we might end up with more VLAN list entries than the designated limit.
Also, The "ip link show" will show more links added than the PF limit.
On the other and, the bitmaps are only used to check the number of VLAN
filters and to re-enable the filters when the interface goes from DOWN to
UP.
This patch gets rid of the bitmaps and uses the list only. To do that,
the states of the VLAN filter are modified:
1 - IAVF_VLAN_REMOVE: the entry needs to be totally removed after informing
the PF. This is the "ip link del eth0.$i" path.
2 - IAVF_VLAN_DISABLE: (new) the netdev went down. The filter needs to be
removed from the PF and then marked INACTIVE.
3 - IAVF_VLAN_INACTIVE: (new) no PF filter exists, but the user did not
delete the VLAN.
Fixes: 48ccc43ecf ("iavf: Add support VIRTCHNL_VF_OFFLOAD_VLAN_V2 during netdev config")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The VLAN filter states are currently being saved as individual bits.
This is error prone as multiple bits might be mistakenly set.
Fix by replacing the bits with a single state enum. Also, add an
"ACTIVE" state for filters that are accepted by the PF.
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
HWmon core receives an array of pointers to hwmon_channel_info and it
does not modify it, thus it can be array of const pointers for safety.
This allows drivers to make them also const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This patch add bonding arp validate tests with mode active backup,
monitor arp_ip_target and ns_ip6_target. It also checks mii_status
to make sure all slaves are UP.
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To improve the testing process for bond options, A new bond topology lib
is added to our testing setup. The current option_prio.sh file will be
renamed to bond_options.sh so that all bonding options can be tested here.
Specifically, for priority testing, we will run all tests using modes
1, 5, and 6. These changes will help us streamline the testing process
and ensure that our bond options are rigorously evaluated.
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When arp_validate is set to 2, 3, or 6, validation is performed for
backup slaves as well. As stated in the bond documentation, validation
involves checking the broadcast ARP request sent out via the active
slave. This helps determine which slaves are more likely to function in
the event of an active slave failure.
However, when the target is an IPv6 address, the NS message sent from
the active interface is not checked on backup slaves. Additionally,
based on the bond_arp_rcv() rule b, we must reverse the saddr and daddr
when checking the NS message.
Note that when checking the NS message, the destination address is a
multicast address. Therefore, we must convert the target address to
solicited multicast in the bond_get_targets_ip6() function.
Prior to the fix, the backup slaves had a mii status of "down", but
after the fix, all of the slaves' mii status was updated to "UP".
Fixes: 4e24be018e ("bonding: add new parameter ns_targets")
Reviewed-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a device is roaming between interfaces and a new flow entry is
created, we should assume that its output device is more up to date than
whatever entry existed already.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WED version 2 (on MT7986 and later) can offload flows originating from
wireless devices.
In order to make that work, ndo_setup_tc needs to be implemented on the
netdevs. This adds the required code to offload flows coming in from WED,
while keeping track of the incoming wed index used for selecting the
correct PPE device.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
UBSAN: shift-out-of-bounds in net/ipv4/tcp_input.c:555:23
shift exponent 255 is too large for 32-bit type 'int'
CPU: 1 PID: 7907 Comm: ssh Not tainted 6.3.0-rc4-00161-g62bad54b26db-dirty #206
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x136/0x150
__ubsan_handle_shift_out_of_bounds+0x21f/0x5a0
tcp_init_transfer.cold+0x3a/0xb9
tcp_finish_connect+0x1d0/0x620
tcp_rcv_state_process+0xd78/0x4d60
tcp_v4_do_rcv+0x33d/0x9d0
__release_sock+0x133/0x3b0
release_sock+0x58/0x1b0
'maxwin' is int, shifting int for 32 or more bits is undefined behaviour.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Smatch reports: drivers/net/ethernet/sun/niu.c:4525
niu_alloc_channels() warn: missing unwind goto?
If niu_rbr_fill() fails, then we are directly returning 'err' without
freeing the channels.
Fix this by changing direct return to a goto 'out_err'.
Fixes: a3138df9f2 ("[NIU]: Add Sun Neptune ethernet driver.")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This lock was supposed to be an unlock.
Fixes: 6cc041e90c ("cifs: avoid races in parallel reconnects in smb1")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently if disk_scan_partitions() failed, GD_NEED_PART_SCAN will still
set, and partition scan will be proceed again when blkdev_get_by_dev()
is called. However, this will cause a problem that re-assemble partitioned
raid device will creat partition for underlying disk.
Test procedure:
mdadm -CR /dev/md0 -l 1 -n 2 /dev/sda /dev/sdb -e 1.0
sgdisk -n 0:0:+100MiB /dev/md0
blockdev --rereadpt /dev/sda
blockdev --rereadpt /dev/sdb
mdadm -S /dev/md0
mdadm -A /dev/md0 /dev/sda /dev/sdb
Test result: underlying disk partition and raid partition can be
observed at the same time
Note that this can still happen in come corner cases that
GD_NEED_PART_SCAN can be set for underlying disk while re-assemble raid
device.
Fixes: e5cfefa97b ("block: fix scan partition for exclusively open device again")
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
From Paul:
- TC action parsing cleanups
- Correctly report stats for missed packets
- Many CT actions limitations removed due to hw misses will now
continue from the relevant tc ct action in software.
From Adham:
- RQ/SQ devlink health diagnostics layout fixes
From Gal And Rahul:
- PTP code cleanup and cyclecounter shift value improvement
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmQuJw4ACgkQSD+KveBX
+j6KIwf/QlEToqbjzTfYPvnzYljq7ZdrtiOKkTTVoj9Dz9O3ROn6lBET5GNI7rn2
QRbSgpFQYnv9n3jDxDnvdgJIIh6RefULLIjCqVF0PZFISOO2kNZF9EzeJF3gWBSG
inFqp2G6ihcx7O6ZwOO8pxLxaTOcI/X2eE9Sk+zmCk67KK9qSFM43rz5v+gQWGDu
2mH2+M8cTqjflvQc/hf3wdVbUza2cYrW0LilcYmQXv62e5I2AaSIrySwdnmzPtci
kwLg9IS139iqWgWKrWCKnfnV2pFRv1EWEwwRSm+e3NA1ov+tG463opVdhSLe+dma
MzDs7KKgYdj8qbG00p+E7ILXm3jQlQ==
=mJge
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-04-05
From Paul:
- TC action parsing cleanups
- Correctly report stats for missed packets
- Many CT actions limitations removed due to hw misses will now
continue from the relevant tc ct action in software.
From Adham:
- RQ/SQ devlink health diagnostics layout fixes
From Gal And Rahul:
- PTP code cleanup and cyclecounter shift value improvement
* tag 'mlx5-updates-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Fix SQ SW state layout in SQ devlink health diagnostics
net/mlx5e: Fix RQ SW state layout in RQ devlink health diagnostics
net/mlx5e: Rename misleading skb_pc/cc references in ptp code
net/mlx5: Update cyclecounter shift value to improve ptp free running mode precision
net/mlx5e: Remove redundant macsec code
net/mlx5e: TC, Remove sample and ct limitation
net/mlx5e: TC, Remove mirror and ct limitation
net/mlx5e: TC, Remove tuple rewrite and ct limitation
net/mlx5e: TC, Remove multiple ct actions limitation
net/mlx5e: TC, Remove special handling of CT action
net/mlx5e: TC, Remove CT action reordering
net/mlx5e: CT: Use per action stats
net/mlx5e: TC, Move main flow attribute cleanup to helper func
net/mlx5e: TC, Remove unused vf_tun variable
net/mlx5e: Set default can_offload action
====================
Link: https://lore.kernel.org/r/20230406020232.83844-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Running this test makes little sense if the enabled l3_stats are not
actually reported as "used". This can signify a failure of a driver to
install the necessary counters, or simply lack of support for enabling
in-HW counters on a given netdevice. It is generally impossible to tell
from the outside which it is. But more likely than not, if somebody is
running this on veth pairs, they do not intend to actually test that a
certain piece of HW can install in-HW counters for the veth. It is more
likely they are e.g. running the test by mistake.
Therefore detect that the counter has not been actually installed. In that
case, if the netdevice is one end of a veth pair, SKIP. Otherwise FAIL.
Suggested-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/a86817961903cca5cb0aebf2b2a06294b8aa7dea.1680704172.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A recent rearrangement of includes has lead to a problem on m68k
as flagged by the kernel test robot.
Resolve this by moving the block asm includes to below linux includes.
A side effect i that non-Sparc asm includes are now immediately
before Sparc asm includes, which seems nice.
Using sparse v0.6.4 I was able to reproduce this problem as follows
using the config provided by the kernel test robot:
$ wget https://download.01.org/0day-ci/archive/20230404/202304041748.0sQc4K4l-lkp@intel.com/config
$ cp config .config
$ make ARCH=m68k oldconfig
$ make ARCH=m68k C=2 M=drivers/net/ethernet/sun
CC [M] drivers/net/ethernet/sun/sunhme.o
In file included from drivers/net/ethernet/sun/sunhme.c:19:
./arch/m68k/include/asm/irq.h:78:11: error: expected ‘;’ before ‘void’
78 | asmlinkage void do_IRQ(int irq, struct pt_regs *regs);
| ^~~~~
| ;
./arch/m68k/include/asm/irq.h:78:40: warning: ‘struct pt_regs’ declared inside parameter list will not be visible outside of this definition or declaration
78 | asmlinkage void do_IRQ(int irq, struct pt_regs *regs);
| ^~~~~~~
Compile tested only.
Fixes: 1ff4f42aef ("net: sunhme: Alphabetize includes")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304041748.0sQc4K4l-lkp@intel.com/
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230405-sunhme-includes-fix-v1-1-bf17cc5de20d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BPF helpers that take an ARG_PTR_TO_UNINIT_MEM must ensure that all of
the memory is set, including beyond the end of the string.
Signed-off-by: Barret Rhoden <brho@google.com>
Link: https://lore.kernel.org/r/20230407001808.1622968-1-brho@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add various tests for code pattern '<const> <cond_op> <non_const>' to
exercise the previous verifier patch.
The following are veristat changed number of processed insns stat
comparing the previous patch vs. this patch:
File Program Insns (A) Insns (B) Insns (DIFF)
----------------------------------------------------- ---------------------------------------------------- --------- --------- -------------
test_seg6_loop.bpf.linked3.o __add_egr_x 12423 12314 -109 (-0.88%)
Only one program is affected with minor change.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230406164510.1047757-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, the verifier does not handle '<const> <cond_op> <non_const>' well.
For example,
...
10: (79) r1 = *(u64 *)(r10 -16) ; R1_w=scalar() R10=fp0
11: (b7) r2 = 0 ; R2_w=0
12: (2d) if r2 > r1 goto pc+2
13: (b7) r0 = 0
14: (95) exit
15: (65) if r1 s> 0x1 goto pc+3
16: (0f) r0 += r1
...
At insn 12, verifier decides both true and false branch are possible, but
actually only false branch is possible.
Currently, the verifier already supports patterns '<non_const> <cond_op> <const>.
Add support for patterns '<const> <cond_op> <non_const>' in a similar way.
Also fix selftest 'verifier_bounds_mix_sign_unsign/bounds checks mixing signed and unsigned, variant 10'
due to this change.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230406164505.1046801-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add various tests for code pattern '<non-const> NE/EQ <const>' implemented
in the previous verifier patch. Without the verifier patch, these new
tests will fail.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230406164500.1045715-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, for BPF_JEQ/BPF_JNE insn, verifier determines
whether the branch is taken or not only if both operands
are constants. Therefore, for the following code snippet,
0: (85) call bpf_ktime_get_ns#5 ; R0_w=scalar()
1: (a5) if r0 < 0x3 goto pc+2 ; R0_w=scalar(umin=3)
2: (b7) r2 = 2 ; R2_w=2
3: (1d) if r0 == r2 goto pc+2 6
At insn 3, since r0 is not a constant, verifier assumes both branch
can be taken which may lead inproper verification failure.
Add comparing umin/umax value and the constant. If the umin value
is greater than the constant, or umax value is smaller than the constant,
for JEQ the branch must be not-taken, and for JNE the branch must be taken.
The jmp32 mode JEQ/JNE branch taken checking is also handled similarly.
The following lists the veristat result w.r.t. changed number
of processes insns during verification:
File Program Insns (A) Insns (B) Insns (DIFF)
----------------------------------------------------- ---------------------------------------------------- --------- --------- ---------------
test_cls_redirect.bpf.linked3.o cls_redirect 64980 73472 +8492 (+13.07%)
test_seg6_loop.bpf.linked3.o __add_egr_x 12425 12423 -2 (-0.02%)
test_tcp_hdr_options.bpf.linked3.o estab 2634 2558 -76 (-2.89%)
test_parse_tcp_hdr_opt.bpf.linked3.o xdp_ingress_v6 1421 1420 -1 (-0.07%)
test_parse_tcp_hdr_opt_dynptr.bpf.linked3.o xdp_ingress_v6 1238 1237 -1 (-0.08%)
test_tc_dtime.bpf.linked3.o egress_fwdns_prio100 414 411 -3 (-0.72%)
Mostly a small improvement but test_cls_redirect.bpf.linked3.o has a 13% regression.
I checked with verifier log and found it this is due to pruning.
For some JEQ/JNE branches impacted by this patch,
one branch is explored and the other has state equivalence and
pruned.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230406164455.1045294-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After a job is pushed into the queue, it is owned by the scheduler core
and may be freed at any time, so we can't write nor read the submit
timestamp after that point.
Fixes oopses observed with the drm/asahi driver, found with kASAN.
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://lore.kernel.org/r/20230406-scheduler-uaf-2-v1-1-972531cf0a81@asahilina.net
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
The AMD [1022:15b8] USB controller loses some internal functional MSI-X
context when transitioning from D0 to D3hot. BIOS normally traps D0->D3hot
and D3hot->D0 transitions so it can save and restore that internal context,
but some firmware in the field can't do this because it fails to clear the
AMD_15B8_RCC_DEV2_EPF0_STRAP2 NO_SOFT_RESET bit.
Clear AMD_15B8_RCC_DEV2_EPF0_STRAP2 NO_SOFT_RESET bit before USB controller
initialization during boot.
Link: https://lore.kernel.org/linux-usb/Y%2Fz9GdHjPyF2rNG3@glanzmann.de/T/#u
Link: https://lore.kernel.org/r/20230329172859.699743-1-Basavaraj.Natikar@amd.com
Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Tested-by: Thomas Glanzmann <thomas@glanzmann.de>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org
pci_msix_can_alloc_dyn() is not declared when CONFIG_PCI_MSI is disabled.
There is no existing user of pci_msix_can_alloc_dyn() but work is in
progress to change this. This work encounters the following error when
CONFIG_PCI_MSI is disabled:
drivers/vfio/pci/vfio_pci_intrs.c:427:21: error: implicit declaration of function 'pci_msix_can_alloc_dyn' [-Werror=implicit-function-declaration]
Provide definition for pci_msix_can_alloc_dyn() in preparation for users
that need to compile when CONFIG_PCI_MSI is disabled.
[bhelgaas: Also reported by Arnd Bergmann <arnd@kernel.org> in
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c; added his Fixes: line]
Fixes: fb0a6a268d ("net/mlx5: Provide external API for allocating vectors")
Fixes: 34026364df ("PCI/MSI: Provide post-enable dynamic allocation interfaces for MSI-X")
Link: https://lore.kernel.org/oe-kbuild-all/202303291000.PWFqGCxH-lkp@intel.com/
Link: https://lore.kernel.org/r/310ecc4815dae4174031062f525245f0755c70e2.1680119924.git.reinette.chatre@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org # v6.2+
Current release - regressions:
- wifi: mac80211:
- fix potential null pointer dereference
- fix receiving mesh packets in forwarding=0 networks
- fix mesh forwarding
Current release - new code bugs:
- virtio/vsock: fix leaks due to missing skb owner
Previous releases - regressions:
- raw: fix NULL deref in raw_get_next().
- sctp: check send stream number after wait_for_sndbuf
- qrtr:
- fix a refcount bug in qrtr_recvmsg()
- do not do DEL_SERVER broadcast after DEL_CLIENT
- wifi: brcmfmac: fix SDIO suspend/resume regression
- wifi: mt76: fix use-after-free in fw features query.
- can: fix race between isotp_sendsmg() and isotp_release()
- eth: mtk_eth_soc: fix remaining throughput regression
-eth: ice: reset FDIR counter in FDIR init stage
Previous releases - always broken:
- core: don't let netpoll invoke NAPI if in xmit context
- icmp: guard against too small mtu
- ipv6: fix an uninit variable access bug in __ip6_make_skb()
- wifi: mac80211: fix the size calculation of ieee80211_ie_len_eht_cap()
- can: fix poll() to not report false EPOLLOUT events
- eth: gve: secure enough bytes in the first TX desc for all TCP pkts
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=1AWK
-----END PGP SIGNATURE-----
Merge tag 'net-6.3-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and can.
Current release - regressions:
- wifi: mac80211:
- fix potential null pointer dereference
- fix receiving mesh packets in forwarding=0 networks
- fix mesh forwarding
Current release - new code bugs:
- virtio/vsock: fix leaks due to missing skb owner
Previous releases - regressions:
- raw: fix NULL deref in raw_get_next().
- sctp: check send stream number after wait_for_sndbuf
- qrtr:
- fix a refcount bug in qrtr_recvmsg()
- do not do DEL_SERVER broadcast after DEL_CLIENT
- wifi: brcmfmac: fix SDIO suspend/resume regression
- wifi: mt76: fix use-after-free in fw features query.
- can: fix race between isotp_sendsmg() and isotp_release()
- eth: mtk_eth_soc: fix remaining throughput regression
- eth: ice: reset FDIR counter in FDIR init stage
Previous releases - always broken:
- core: don't let netpoll invoke NAPI if in xmit context
- icmp: guard against too small mtu
- ipv6: fix an uninit variable access bug in __ip6_make_skb()
- wifi: mac80211: fix the size calculation of
ieee80211_ie_len_eht_cap()
- can: fix poll() to not report false EPOLLOUT events
- eth: gve: secure enough bytes in the first TX desc for all TCP
pkts"
* tag 'net-6.3-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net: stmmac: check fwnode for phy device before scanning for phy
net: stmmac: Add queue reset into stmmac_xdp_open() function
selftests: net: rps_default_mask.sh: delete veth link specifically
net: fec: make use of MDIO C45 quirk
can: isotp: fix race between isotp_sendsmg() and isotp_release()
can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events
can: isotp: isotp_recvmsg(): use sock_recv_cmsgs() to get SOCK_RXQ_OVFL infos
can: j1939: j1939_tp_tx_dat_new(): fix out-of-bounds memory access
gve: Secure enough bytes in the first TX desc for all TCP pkts
netlink: annotate lockless accesses to nlk->max_recvmsg_len
ethtool: reset #lanes when lanes is omitted
ping: Fix potentail NULL deref for /proc/net/icmp.
raw: Fix NULL deref in raw_get_next().
ice: Reset FDIR counter in FDIR init stage
ice: fix wrong fallback logic for FDIR
net: stmmac: fix up RX flow hash indirection table when setting channels
net: ethernet: ti: am65-cpsw: Fix mdio cleanup in probe
wifi: mt76: ignore key disable commands
wifi: ath11k: reduce the MHI timeout to 20s
ipv6: Fix an uninit variable access bug in __ip6_make_skb()
...
This Kselftest fixes update for Linux 6.3-rc6 consists of one single
fix to mount_setattr_test build failure.
-----BEGIN PGP SIGNATURE-----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=oGdA
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"One single fix to mount_setattr_test build failure"
* tag 'linux-kselftest-fixes-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests mount: Fix mount_setattr_test builds failed
Three bugs found by syzkaller:
- An invalid VA range can be be put in a pages and eventually trigger
WARN_ON, reject it early
- Use of the wrong start index value when doing the complex batch carry
scheme
- Wrong store ordering resulting in corrupting data used in a later
calculation that corrupted the batch structure during carry
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZC7G7AAKCRCFwuHvBreF
YQsjAQDiA56UTfVHwuMWEdZJ7clHbOeZk7xWMLTewVNBxktxhwD/fUVRqeC9uZKT
TAWvcHUN4f6dzzfBecKLZaSHrft5lws=
=u8cW
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
- An invalid VA range can be be put in a pages and eventually trigger
WARN_ON, reject it early
- Use of the wrong start index value when doing the complex batch carry
scheme
- Wrong store ordering resulting in corrupting data used in a later
calculation that corrupted the batch structure during carry
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Do not corrupt the pfn list when doing batch carry
iommufd: Fix unpinning of pages when an access is present
iommufd: Check for uptr overflow
These are some fixes to make sure the PWM state structure is always
initialized to a known state. Prior to this it could happen in some
situations that random data from the stack would leak into the data
structure and cause subtle bugs.
-----BEGIN PGP SIGNATURE-----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=w7D4
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fixes from Thierry Reding:
"These are some fixes to make sure the PWM state structure is always
initialized to a known state.
Prior to this it could happen in some situations that random data from
the stack would leak into the data structure and cause subtle bugs"
* tag 'pwm/for-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: Zero-initialize the pwm_state passed to driver's .get_state()
pwm: meson: Explicitly set .polarity in .get_state()
pwm: sprd: Explicitly set .polarity in .get_state()
pwm: iqs620a: Explicitly set .polarity in .get_state()
pwm: cros-ec: Explicitly set .polarity in .get_state()
pwm: hibvt: Explicitly set .polarity in .get_state()
Kal Conley says:
====================
This patchset includes the test with the bugfix as requested here:
https://lore.kernel.org/all/f1a32d5a-03e7-fce1-f5a5-6095f365f0a9@linux.dev/
Patch #1 (the bugfix) is identical to the previous submission except
that I improved the commit message slightly.
Magnus: I improved the test code a little different than you asked
since I thought this was a little simpler than having a separate
function for now. Hopefully, you can live with this :-).
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add unaligned descriptor test for frame size of 4001. Using an odd frame
size ensures that the end of the UMEM is not near a page boundary. This
allows testing descriptors that staddle the end of the UMEM but not a
page.
This test used to fail without the previous commit ("xsk: Fix unaligned
descriptor validation").
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Link: https://lore.kernel.org/r/20230405235920.7305-3-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
- Ensure the guest PMU context is restored before the first KVM_RUN,
fixing an issue where EL0 event counting is broken after vCPU
save/restore
- Actually initialize ID_AA64PFR0_EL1.{CSV2,CSV3} based on the
sanitized, system-wide values for protected VMs
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZC2ZbwAKCRCivnWIJHzd
FvovAP9aooqUBBs8w2myh8SXCv7dJOg88r6fKS5vCqMdkY7OhwD9GXA7hWU2dXdy
X1L8qq6C7R+GtIY/kDm9E2HkNKg7rQc=
=nfXd
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.3, part #3
- Ensure the guest PMU context is restored before the first KVM_RUN,
fixing an issue where EL0 event counting is broken after vCPU
save/restore
- Actually initialize ID_AA64PFR0_EL1.{CSV2,CSV3} based on the
sanitized, system-wide values for protected VMs
Mostly i915 fixes: dp mst for compression/dsc, perf ioctl uaf, ctx rpm
accounting, gt reset vs huc loading.
And a few individual driver fixes: ivpu dma fence&suspend, panfrost
mmap, nouveau color depth
-----BEGIN PGP SIGNATURE-----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=kCTh
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2023-04-06' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"Mostly i915 fixes: dp mst for compression/dsc, perf ioctl uaf, ctx rpm
accounting, gt reset vs huc loading.
And a few individual driver fixes: ivpu dma fence&suspend, panfrost
mmap, nouveau color depth"
* tag 'drm-fixes-2023-04-06' of git://anongit.freedesktop.org/drm/drm:
accel/ivpu: Fix S3 system suspend when not idle
accel/ivpu: Add dma fence to command buffers only
drm/i915: Fix context runtime accounting
drm/i915: fix race condition UAF in i915_perf_add_config_ioctl
drm/i915: Use compressed bpp when calculating m/n value for DP MST DSC
drm/i915/huc: Cancel HuC delayed load timer on reset.
drm/i915/ttm: fix sparse warning
drm/panfrost: Fix the panfrost_mmu_map_fault_addr() error path
drm/nouveau/disp: Support more modes by checking with lower bpc
The majority of changes here are various fixes for Intel drivers,
while there is a change in ASoC PCM core for the format constraints.
In addition, a workaround for HD-audio HDMI regressions and usual
HD-audio quirks are found.
-----BEGIN PGP SIGNATURE-----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=ryKW
-----END PGP SIGNATURE-----
Merge tag 'sound-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The majority of changes here are various fixes for Intel drivers,
and there is a change in ASoC PCM core for the format constraints.
In addition, a workaround for HD-audio HDMI regressions and usual
HD-audio quirks are found"
* tag 'sound-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: Preserve the previous PCM device upon re-enablement
ALSA: hda/realtek: Add quirk for Clevo X370SNW
ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook
ASoC: SOF: avoid a NULL dereference with unsupported widgets
ASoC: da7213.c: add missing pm_runtime_disable()
ASoC: hdac_hdmi: use set_stream() instead of set_tdm_slots()
ASoC: codecs: lpass: fix the order or clks turn off during suspend
ASoC: Intel: bytcr_rt5640: Add quirk for the Acer Iconia One 7 B1-750
ASoC: SOF: ipc4: Ensure DSP is in D0I0 during sof_ipc4_set_get_data()
ASoC: amd: yc: Add DMI entries to support Victus by HP Laptop 16-e1xxx (8A22)
ASoC: soc-pcm: fix hw->formats cleared by soc_pcm_hw_init() for dpcm
ASoC: Intel: soc-acpi: add table for Intel 'Rooks County' NUC M15
ASOC: Intel: sof_sdw: add quirk for Intel 'Rooks County' NUC M15
