Extend sev_smoke_test to also run a minimal SEV-SNP smoke test that
initializes and sets up private memory regions required to run a simple
SEV-SNP guest.
Similar to its SEV-ES smoke test counterpart, this also does not
support GHCB and ucall yet and uses the GHCB MSR protocol to trigger an
exit of the type KVM_EXIT_SYSTEM_EVENT.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-11-prsampat@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
In preparation for SNP, cleanup the smoke test to decouple deriving type
from policy. This will allow reusing the existing interfaces for SNP.
No functional change intended.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-10-prsampat@amd.com
[sean: massage shortlog+changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Force the SEV-SNP VM type to set the KVM_MEM_GUEST_MEMFD flag for the
creation of private memslots.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-9-prsampat@amd.com
[sean: add a comment, don't break non-x86]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend the SEV library to include support for SNP ioctl() wrappers,
which aid in launching and interacting with a SEV-SNP guest.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-8-prsampat@amd.com
[sean: use BIT()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
In preparation for SNP, declutter the vm type check by introducing a
SEV-SNP VM type check as well as a transitive set of helper functions.
The SNP VM type is the subset of SEV-ES. Similarly, the SEV-ES and SNP
types are subset of the SEV VM type check.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-7-prsampat@amd.com
[sean: make the helpers static inlines]
Signed-off-by: Sean Christopherson <seanjc@google.com>
For SEV tests, assert() failures on VM type or fd do not provide
sufficient error reporting. Replace assert() with TEST_ASSERT_EQ() to
obtain more detailed information on the assertion condition failure,
including the call stack.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-6-prsampat@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the SMT control check out of the hyperv_cpuid selftest so that it
is generally accessible all KVM selftests. Split the functionality into
a helper that populates a buffer with SMT control value which other
helpers can use to ascertain if SMT state is available and active.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-5-prsampat@amd.com
[sean: prepend is_ to the helpers]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Abstract rep vmmcall coded into the vmgexit helper for the sev
library.
No functional change intended.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-4-prsampat@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add the X86_FEATURE_SEV_SNP CPU feature to the architectural definition
for the SEV-SNP VM type to exercise the KVM_SEV_INIT2 call. Ensure that
the SNP test is skipped in scenarios where CPUID supports it but KVM
does not, preventing reporting of failure in such cases.
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-3-prsampat@amd.com
[sean: use the same pattern as SEV and SEV-ES]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add missing stubs for mutex and free_reserved_area() to memblock tests
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmf7kxgQHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kbv4B/0XhZGFhmZt7yXlOU6ywPB94nLgH7lWkbHe
Kxca0M7/77Vd19nRaHq9zIO2SQkkz3mKQNuSTsBLZLUrRi/oivWN9jFlaXMytLcT
v2XeX7HCX4FqSAKbA0fu130/qIyHJAyy+cUIuAhy/043eE7mtj99yCHkwza7S4US
gL1kFNBH9hLuLhm7Pnq7yBK6Wx2kuFhMwG6Deb6AWrSJ1pfv/wMfzwXfBiZ2oy/8
CfDdeSXiIKoj9CDMnwrbVADZxVFvCC9YooatQoJ/Y+35MwN5XQyJFtS0rXvEHkvf
jS+HQCUXKxoVeZKVhKnauZ8h1NgLzyhSvUB9iPBo/fdyGDXpU8OO
=DpcO
-----END PGP SIGNATURE-----
Merge tag 'fixes-2025-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix build of memblock test.
Add missing stubs for mutex and free_reserved_area() to memblock
tests"
* tag 'fixes-2025-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: Fix mutex related build error
- Hide get_vm_area() from MMUless builds
The function get_vm_area() is not defined when CONFIG_MMU is not defined.
Hide that function within #ifdef CONFIG_MMU.
- Fix output of synthetic events when they have dynamic strings
The print fmt of the synthetic event's format file use to have "%.*s" for
dynamic size strings even though the user space exported arguments had
only __get_str() macro that provided just a nul terminated string. This
was fixed so that user space could parse this properly. But the reason
that it had "%.*s" was because internally it provided the maximum size of
the string as one of the arguments. The fix that replaced "%.*s" with "%s"
caused the trace output (when the kernel reads the event) to write
"(efault)" as it would now read the length of the string as "%s".
As the string provided is always nul terminated, there's no reason for the
internal code to use "%.*s" anyway. Just remove the length argument to
match the "%s" that is now in the format.
- Fix the ftrace subops hash logic of the manager ops hash
The function_graph uses the ftrace subops code. The subops code is a way
to have a single ftrace_ops registered with ftrace to determine what
functions will call the ftrace_ops callback. More than one user of
function graph can register a ftrace_ops with it. The function graph
infrastructure will then add this ftrace_ops as a subops with the main
ftrace_ops it registers with ftrace. This is because the functions will
always call the function graph callback which in turn calls the subops
ftrace_ops callbacks.
The main ftrace_ops must add a callback to all the functions that the
subops want a callback from. When a subops is registered, it will update
the main ftrace_ops hash to include the functions it wants. This is the
logic that was broken.
The ftrace_ops hash has a "filter_hash" and a "notrace_hash" were all the
functions in the filter_hash but not in the notrace_hash are attached by
ftrace. The original logic would have the main ftrace_ops filter_hash be a
union of all the subops filter_hashes and the main notrace_hash would be a
intersect of all the subops filter hashes. But this was incorrect because
the notrace hash depends on the filter_hash it is associated to and not
the union of all filter_hashes.
Instead, when a subops is added, just include all the functions of the
subops hash that are in its filter_hash but not in its notrace_hash. The
main subops hash should not use its notrace hash, unless all of its subops
hashes have an empty filter_hash (which means to attach to all functions),
and then, and only then, the main ftrace_ops notrace hash can be the
intersect of all the subops hashes.
This not only fixes the bug, but also simplifies the code.
- Add a selftest to better test the subops filtering
Add a selftest that would catch the bug fixed by the above change.
- Fix extra newline printed in function tracing with retval
The function parameter code changed the output logic slightly and called
print_graph_retval() and also printed a newline. The print_graph_retval()
also prints a newline which caused blank lines to be printed in the
function graph tracer when retval was added. This caused one of the
selftests to fail if retvals were enabled. Instead remove the new line
output from print_graph_retval() and have the callers always print the
new line so that it doesn't have to do special logic if it calls
print_graph_retval() or not.
- Fix out-of-bound memory access in the runtime verifier
When rv_is_container_monitor() is called on the last entry on the link
list it references the next entry, which is the list head and causes an
out-of-bound memory access.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ/rXQxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoj7AQC0C2awpJSUIRj91qjPtMYuNUE3AVpB
EEZEkt19LfE//gEA1fOx3Cors/LrY9dthn/3LMKL23vo9c4i0ffhs2X+1gE=
=XJL5
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Hide get_vm_area() from MMUless builds
The function get_vm_area() is not defined when CONFIG_MMU is not
defined. Hide that function within #ifdef CONFIG_MMU.
- Fix output of synthetic events when they have dynamic strings
The print fmt of the synthetic event's format file use to have "%.*s"
for dynamic size strings even though the user space exported
arguments had only __get_str() macro that provided just a nul
terminated string. This was fixed so that user space could parse this
properly.
But the reason that it had "%.*s" was because internally it provided
the maximum size of the string as one of the arguments. The fix that
replaced "%.*s" with "%s" caused the trace output (when the kernel
reads the event) to write "(efault)" as it would now read the length
of the string as "%s".
As the string provided is always nul terminated, there's no reason
for the internal code to use "%.*s" anyway. Just remove the length
argument to match the "%s" that is now in the format.
- Fix the ftrace subops hash logic of the manager ops hash
The function_graph uses the ftrace subops code. The subops code is a
way to have a single ftrace_ops registered with ftrace to determine
what functions will call the ftrace_ops callback. More than one user
of function graph can register a ftrace_ops with it. The function
graph infrastructure will then add this ftrace_ops as a subops with
the main ftrace_ops it registers with ftrace. This is because the
functions will always call the function graph callback which in turn
calls the subops ftrace_ops callbacks.
The main ftrace_ops must add a callback to all the functions that the
subops want a callback from. When a subops is registered, it will
update the main ftrace_ops hash to include the functions it wants.
This is the logic that was broken.
The ftrace_ops hash has a "filter_hash" and a "notrace_hash" where
all the functions in the filter_hash but not in the notrace_hash are
attached by ftrace. The original logic would have the main ftrace_ops
filter_hash be a union of all the subops filter_hashes and the main
notrace_hash would be a intersect of all the subops filter hashes.
But this was incorrect because the notrace hash depends on the
filter_hash it is associated to and not the union of all
filter_hashes.
Instead, when a subops is added, just include all the functions of
the subops hash that are in its filter_hash but not in its
notrace_hash. The main subops hash should not use its notrace hash,
unless all of its subops hashes have an empty filter_hash (which
means to attach to all functions), and then, and only then, the main
ftrace_ops notrace hash can be the intersect of all the subops
hashes.
This not only fixes the bug, but also simplifies the code.
- Add a selftest to better test the subops filtering
Add a selftest that would catch the bug fixed by the above change.
- Fix extra newline printed in function tracing with retval
The function parameter code changed the output logic slightly and
called print_graph_retval() and also printed a newline. The
print_graph_retval() also prints a newline which caused blank lines
to be printed in the function graph tracer when retval was added.
This caused one of the selftests to fail if retvals were enabled.
Instead remove the new line output from print_graph_retval() and have
the callers always print the new line so that it doesn't have to do
special logic if it calls print_graph_retval() or not.
- Fix out-of-bound memory access in the runtime verifier
When rv_is_container_monitor() is called on the last entry on the
link list it references the next entry, which is the list head and
causes an out-of-bound memory access.
* tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix out-of-bound memory access in rv_is_container_monitor()
ftrace: Do not have print_graph_retval() add a newline
tracing/selftest: Add test to better test subops filtering of function graph
ftrace: Fix accounting of subop hashes
ftrace: Properly merge notrace hashes
tracing: Do not add length to print format in synthetic events
tracing: Hide get_vm_area() from MMUless builds
-----BEGIN PGP SIGNATURE-----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=Mezb
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Followup fixes for resilient spinlock (Kumar Kartikeya Dwivedi):
- Make res_spin_lock test less verbose, since it was spamming BPF
CI on failure, and make the check for AA deadlock stronger
- Fix rebasing mistake and use architecture provided
res_smp_cond_load_acquire
- Convert BPF maps (queue_stack and ringbuf) to resilient spinlock
to address long standing syzbot reports
- Make sure that classic BPF load instruction from SKF_[NET|LL]_OFF
offsets works when skb is fragmeneted (Willem de Bruijn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Convert ringbuf map to rqspinlock
bpf: Convert queue_stack map to rqspinlock
bpf: Use architecture provided res_smp_cond_load_acquire
selftests/bpf: Make res_spin_lock AA test condition stronger
selftests/net: test sk_filter support for SKF_NET_OFF on frags
bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags
selftests/bpf: Make res_spin_lock test less verbose
A bug was discovered that showed the accounting of the subops of the
ftrace_ops filtering was incorrect. Add a new test to better test the
filtering.
This test creates two instances, where it will add various filters to both
the set_ftrace_filter and the set_ftrace_notrace files and enable
function_graph. Then it looks into the enabled_functions file to make sure
that the filters are behaving correctly.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Andy Chiu <andybnac@gmail.com>
Link: https://lore.kernel.org/20250409152720.380778379@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Let's make sure that we see a EDEADLK and ETIMEDOUT whenever checking
for the AA tests (in case of simple AA and AA after exhausting 31
entries).
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250410170023.2670683-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current release - regressions:
- core: hold instance lock during NETDEV_CHANGE
- rtnetlink: fix bad unlock balance in do_setlink().
- ipv6:
- fix null-ptr-deref in addrconf_add_ifaddr().
- align behavior across nexthops during path selection
Previous releases - regressions:
- sctp: prevent transport UaF in sendmsg
- mptcp: only inc MPJoinAckHMacFailure for HMAC failures
Previous releases - always broken:
- sched:
- make ->qlen_notify() idempotent
- ensure sufficient space when sending filter netlink notifications
- sch_sfq: really don't allow 1 packet limit
- netfilter: fix incorrect avx2 match of 5th field octet
- tls: explicitly disallow disconnect
- eth: octeontx2-pf: fix VF root node parent queue priority
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=wkGz
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- core: hold instance lock during NETDEV_CHANGE
- rtnetlink: fix bad unlock balance in do_setlink()
- ipv6:
- fix null-ptr-deref in addrconf_add_ifaddr()
- align behavior across nexthops during path selection
Previous releases - regressions:
- sctp: prevent transport UaF in sendmsg
- mptcp: only inc MPJoinAckHMacFailure for HMAC failures
Previous releases - always broken:
- sched:
- make ->qlen_notify() idempotent
- ensure sufficient space when sending filter netlink notifications
- sch_sfq: really don't allow 1 packet limit
- netfilter: fix incorrect avx2 match of 5th field octet
- tls: explicitly disallow disconnect
- eth: octeontx2-pf: fix VF root node parent queue priority"
* tag 'net-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
ethtool: cmis_cdb: Fix incorrect read / write length extension
selftests: netfilter: add test case for recent mismatch bug
nft_set_pipapo: fix incorrect avx2 match of 5th field octet
net: ppp: Add bound checking for skb data on ppp_sync_txmung
net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod.
ipv6: Align behavior across nexthops during path selection
net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY
net: phy: move phy_link_change() prior to mdio_bus_phy_may_suspend()
selftests/tc-testing: sfq: check that a derived limit of 1 is rejected
net_sched: sch_sfq: move the limit validation
net_sched: sch_sfq: use a temporary work area for validating configuration
net: libwx: handle page_pool_dev_alloc_pages error
selftests: mptcp: validate MPJoin HMacFailure counters
mptcp: only inc MPJoinAckHMacFailure for HMAC failures
rtnetlink: Fix bad unlock balance in do_setlink().
net: ethtool: Don't call .cleanup_data when prepare_data fails
tc: Ensure we have enough buffer space when sending filter netlink notifications
net: libwx: Fix the wrong Rx descriptor field
octeontx2-pf: qos: fix VF root node parent queue index
selftests: tls: check that disconnect does nothing
...
Without 'nft_set_pipapo: fix incorrect avx2 match of 5th field octet"
this fails:
TEST: reported issues
Add two elements, flush, re-add 1s [ OK ]
net,mac with reload 0s [ OK ]
net,port,proto 3s [ OK ]
avx2 false match 0s [FAIL]
False match for fe80:dead:01fe:0a02:0b03:6007:8009:a001
Other tests do not detect the kernel bug as they only alter parts in
the /64 netmask.
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Verify that a classic BPF linux socket filter correctly matches
packet contents. Including when accessing contents in an
skb_frag.
1. Open a SOCK_RAW socket with a classic BPF filter on UDP dport 8000.
2. Open a tap device with IFF_NAPI_FRAGS to inject skbs with frags.
3. Send a packet for which the UDP header is in frag[0].
4. Receive this packet to demonstrate that the socket accepted it.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20250408132833.195491-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fixes tpm2, futex, and mincore tests. Creates a dedicated .gitignore
for tpm2
Details:
selftests: tpm2: test_smoke: use POSIX-conformant expression operator
selftests/futex: futex_waitv wouldblock test should fail
selftests: tpm2: create a dedicated .gitignore
selftests/mincore: Allow read-ahead pages to reach the end of the file
-----BEGIN PGP SIGNATURE-----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=KUYx
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-fixes-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
- Fixes tpm2, futex, and mincore tests
- Create a dedicated .gitignore for tpm2 tests
* tag 'linux_kselftest-fixes-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/mincore: Allow read-ahead pages to reach the end of the file
selftests/futex: futex_waitv wouldblock test should fail
selftests: tpm2: test_smoke: use POSIX-conformant expression operator
selftests: tpm2: create a dedicated .gitignore
Because the limit is updated indirectly when other parameters are
updated, there are cases where even though the user requests a limit
of 2 it can actually be set to 1.
Add the following test cases to check that the kernel rejects them:
- limit 2 depth 1 flows 1
- limit 2 depth 1 divisor 1
Signed-off-by: Octavian Purdila <tavip@google.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes tool to report test count in case of a late test plan when tests
are specified before the test plan. Fixes spelling error in the commit
that went into 6.15-rc1.
-----BEGIN PGP SIGNATURE-----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=VdOJ
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
- Fix the tool to report test count in case of a late test plan when
tests are specified before the test plan
- Fix spelling error
* tag 'linux_kselftest-kunit-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Spelling s/slowm/slow/
kunit: tool: fix count of tests if late test plan
The parent commit fixes an issue around these counters where one of them
-- MPJoinAckHMacFailure -- was wrongly incremented in some cases.
This makes sure the counter is always 0. It should be incremented only
in case of corruption, or a wrong implementation, which should not be
the case in these selftests.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250407-net-mptcp-hmac-failure-mib-v1-2-3c9ecd0a3a50@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running the mincore_selftest on a system with an XFS file system, it
failed the "check_file_mmap" test case due to the read-ahead pages reaching
the end of the file. The failure log is as below:
RUN global.check_file_mmap ...
mincore_selftest.c:264:check_file_mmap:Expected i (1024) < vec_size (1024)
mincore_selftest.c:265:check_file_mmap:Read-ahead pages reached the end of the file
check_file_mmap: Test failed
FAIL global.check_file_mmap
This is because the read-ahead window size of the XFS file system on this
machine is 4 MB, which is larger than the size from the #PF address to the
end of the file. As a result, all the pages for this file are populated.
blockdev --getra /dev/nvme0n1p5
8192
blockdev --getbsz /dev/nvme0n1p5
512
This issue can be fixed by extending the current FILE_SIZE 4MB to a larger
number, but it will still fail if the read-ahead window size of the file
system is larger enough. Additionally, in the real world, read-ahead pages
reaching the end of the file can happen and is an expected behavior.
Therefore, allowing read-ahead pages to reach the end of the file is a
better choice for the "check_file_mmap" test case.
Link: https://lore.kernel.org/r/20250311080940.21413-1-qiuxu.zhuo@intel.com
Reported-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Testcase should fail if -EWOULDBLOCK is not returned when expected value
differs from actual value from the waiter.
Link: https://lore.kernel.org/r/20250404221225.1596324-1-edliaw@google.com
Fixes: 9d57f7c797 ("selftests: futex: Test sys_futex_waitv() wouldblock")
Signed-off-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix test count with late test plan.
For example,
TAP version 13
ok 1 test1
1..4
Returns a count of 1 passed, 1 crashed (because it expects tests after
the test plan): returning the total count of 2 tests
Change this to be 1 passed, 1 error: total count of 1 test
Link: https://lore.kernel.org/r/20250319223351.1517262-1-rmoar@google.com
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Use POSIX-conformant expression operator symbol '='.
The use of the non POSIX-conformant symbol '==' would work
in bash, but not in sh where the unexpected operator error
would result in test_smoke.sh being skipped.
Instead of changing the shebang to use bash, which may not be
available on all systems, use the POSIX-conformant expression
symbol '=' to test for equality.
Without this patch:
===================
# make -j8 TARGETS=tpm2 kselftest
# selftests: tpm2: test_smoke.sh
# ./test_smoke.sh: 9: [: 2: unexpected operator
ok 1 selftests: tpm2: test_smoke.sh # SKIP
With this patch:
================
# make -j8 TARGETS=tpm2 kselftest
# selftests: tpm2: test_smoke.sh
# Ran 9 tests in 9.236s
ok 1 selftests: tpm2: test_smoke.sh
Link: https://lore.kernel.org/r/37ztyakgrrtgvec344mg7mspchwjpxxtsprtjidso3pwkmm4f4@awsa5mzgqmtb
Signed-off-by: Ahmed Salem <x0rw3ll@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The tpm2 selftests produce two logs: SpaceTest.log and
AsyncTest.log. Only SpaceTest.log was listed in selftests/.gitignore,
while AsyncTest.log remained untracked.
This change creates a dedicated .gitignore in the tpm2/ directory to
manage these entries, keeping tpm2-specific patterns isolated from
parent .gitignore.
Fixed white-space errors during commit
Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250126195147.902608-1-khaledelnaggarlinux@gmail.com
Signed-off-by: Khaled Elnaggar <khaledelnaggarlinux@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
* Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA.
* Use acquire/release semantics in the KVM FF-A proxy to avoid reading
a stale value for the FF-A version.
* Fix KVM guest driver to match PV CPUID hypercall ABI.
* Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work.
s390:
* Don't use %pK for debug printing and tracepoints.
x86:
* Use a separate subclass when acquiring KVM's per-CPU posted interrupts
wakeup lock in the scheduled out path, i.e. when adding a vCPU on
the list of vCPUs to wake, to workaround a false positive deadlock.
The schedule out code runs with a scheduler lock that the wakeup
handler takes in the opposite order; but it does so with IRQs disabled
and cannot run concurrently with a wakeup.
* Explicitly zero-initialize on-stack CPUID unions
* Allow building irqbypass.ko as as module when kvm.ko is a module
* Wrap relatively expensive sanity check with KVM_PROVE_MMU
* Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
selftests:
* Add more scenarios to the MONITOR/MWAIT test.
* Add option to rseq test to override /dev/cpu_dma_latency
* Bring list of exit reasons up to date
* Cleanup Makefile to list once tests that are valid on all architectures
Other:
* Documentation fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmf083IUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroN1dgf/QwfpZcHoMNQSnrc1jMy2LHrArln2
XfmsOGZTU7kyoLQsLWGAPNocOveGdiemTDsj5ZXoNMnqV8hCBr+tZuv2gWI1rr/o
kiGerdIgSZ9piTjBlJkVAaOzbWhg2DUnr7qVVzEzFY9+rPNyQ81vgAfU7h56KhYB
optecozmBrHHAxvQZwmPeL9UyPWFjOF1BY/8LTMx7X+aVuCX6qx1JqO3a3ylAw4J
tGXv6qFJfuCnu1d1b4X0ILce0iMUTOjQzvTcIm+BKjYycecl+3j1aczC/BOorIgc
mf0+XeauhcTduK73pirnvx2b05eOxntgkOpwJytO2RP6pE0uK+2Th/C3Qg==
=ba/Y
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA
- Use acquire/release semantics in the KVM FF-A proxy to avoid
reading a stale value for the FF-A version
- Fix KVM guest driver to match PV CPUID hypercall ABI
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work
s390:
- Don't use %pK for debug printing and tracepoints
x86:
- Use a separate subclass when acquiring KVM's per-CPU posted
interrupts wakeup lock in the scheduled out path, i.e. when adding
a vCPU on the list of vCPUs to wake, to workaround a false positive
deadlock. The schedule out code runs with a scheduler lock that the
wakeup handler takes in the opposite order; but it does so with
IRQs disabled and cannot run concurrently with a wakeup
- Explicitly zero-initialize on-stack CPUID unions
- Allow building irqbypass.ko as as module when kvm.ko is a module
- Wrap relatively expensive sanity check with KVM_PROVE_MMU
- Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
selftests:
- Add more scenarios to the MONITOR/MWAIT test
- Add option to rseq test to override /dev/cpu_dma_latency
- Bring list of exit reasons up to date
- Cleanup Makefile to list once tests that are valid on all
architectures
Other:
- Documentation fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: arm64: Use acquire/release to communicate FF-A version negotiation
KVM: arm64: selftests: Explicitly set the page attrs to Inner-Shareable
KVM: arm64: selftests: Introduce and use hardware-definition macros
KVM: VMX: Use separate subclasses for PI wakeup lock to squash false positive
KVM: VMX: Assert that IRQs are disabled when putting vCPU on PI wakeup list
KVM: x86: Explicitly zero-initialize on-stack CPUID unions
KVM: Allow building irqbypass.ko as as module when kvm.ko is a module
KVM: x86/mmu: Wrap sanity check on number of TDP MMU pages with KVM_PROVE_MMU
KVM: selftests: Add option to rseq test to override /dev/cpu_dma_latency
KVM: x86: Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
Documentation: kvm: remove KVM_CAP_MIPS_TE
Documentation: kvm: organize capabilities in the right section
Documentation: kvm: fix some definition lists
Documentation: kvm: drop "Capability" heading from capabilities
Documentation: kvm: give correct name for KVM_CAP_SPAPR_MULTITCE
Documentation: KVM: KVM_GET_SUPPORTED_CPUID now exposes TSC_DEADLINE
selftests: kvm: list once tests that are valid on all architectures
selftests: kvm: bring list of exit reasons up to date
selftests: kvm: revamp MONITOR/MWAIT tests
KVM: arm64: Don't translate FAR if invalid/unsafe
...
- A number of cpuset remote partition related fixes and cleanups along with
selftest updates.
- A change from this merge window made cgroup_rstat_updated_list() called
outside cgroup_rstat_lock leading to list corruptions. Fix it by
relocating the call inside the lock.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZ/QMSQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGebUAP0bdg/hIX5OjhREbaDKWoUyAHnHqMdg3Dvngvhp
d9aOqQD/b1jdVfDINFtb2qjOpizPjyI0ycQxrr9K3DrSYmUAKAs=
=hFhq
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- A number of cpuset remote partition related fixes and cleanups along
with selftest updates.
- A change from this merge window made cgroup_rstat_updated_list()
called outside cgroup_rstat_lock leading to list corruptions. Fix it
by relocating the call inside the lock.
* tag 'cgroup-for-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Fix race between newly created partition and dying one
cgroup: rstat: call cgroup_rstat_updated_list with cgroup_rstat_lock
selftest/cgroup: Add a remote partition transition test to test_cpuset_prs.sh
selftest/cgroup: Clean up and restructure test_cpuset_prs.sh
selftest/cgroup: Update test_cpuset_prs.sh to use | as effective CPUs and state separator
cgroup/cpuset: Remove unneeded goto in sched_partition_write() and rename it
cgroup/cpuset: Code cleanup and comment update
cgroup/cpuset: Don't allow creation of local partition over a remote one
cgroup/cpuset: Remove remote_partition_check() & make update_cpumasks_hier() handle remote partition
cgroup/cpuset: Fix error handling in remote_partition_disable()
cgroup/cpuset: Fix incorrect isolated_cpus update in update_parent_effective_cpumask()
Finish cleaning up the CRC kconfig options by removing the remaining
unnecessary prompts and an unnecessary 'default y', removing
CONFIG_LIBCRC32C, and documenting all the CRC library options.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ/P7QhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKyoOAQCynFcS1dWuD27S+SdUREmBjMAoZo5M
zdsIvlPv9KLycgD/QX5lXjW3KIYY6jQ8vHUuLVwfDl/JEp4GJS9dLGU+agg=
=0R1T
-----END PGP SIGNATURE-----
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC cleanups from Eric Biggers:
"Finish cleaning up the CRC kconfig options by removing the remaining
unnecessary prompts and an unnecessary 'default y', removing
CONFIG_LIBCRC32C, and documenting all the CRC library options"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc: remove CONFIG_LIBCRC32C
lib/crc: document all the CRC library kconfig options
lib/crc: remove unnecessary prompt for CONFIG_CRC_ITU_T
lib/crc: remove unnecessary prompt for CONFIG_CRC_T10DIF
lib/crc: remove unnecessary prompt for CONFIG_CRC16
lib/crc: remove unnecessary prompt for CONFIG_CRC_CCITT
lib/crc: remove unnecessary prompt for CONFIG_CRC32 and drop 'default y'
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA.
- Use acquire/release semantics in the KVM FF-A proxy to avoid reading
a stale value for the FF-A version.
- Fix KVM guest driver to match PV CPUID hypercall ABI.
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZ/RO9hccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFmRuAP0YajO4qHJe1vHtCkamuPnEY0Kp
E+t2TwPafPbrPdQ1PgEAq6lHuSdUnid1r/uhRKIT+ywW8tE97eNwQAa1LFma0Ac=
=d4G5
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64: First batch of fixes for 6.15
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA.
- Use acquire/release semantics in the KVM FF-A proxy to avoid reading
a stale value for the FF-A version.
- Fix KVM guest driver to match PV CPUID hypercall ABI.
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work.
Add a test case for FQ_CODEL with ETS parent to verify packet drop
behavior when the queue becomes empty. This helps ensure proper
notification mechanisms between qdiscs.
Note this is best-effort, it is hard to play with those parameters
perfectly to always trigger ->qlen_notify().
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250403211636.166257-6-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a test case for FQ_CODEL with DRR parent to verify packet drop
behavior when the queue becomes empty. This helps ensure proper
notification mechanisms between qdiscs.
Note this is best-effort, it is hard to play with those parameters
perfectly to always trigger ->qlen_notify().
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250403211636.166257-5-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a test case for FQ_CODEL with HFSC parent to verify packet drop
behavior when the queue becomes empty. This helps ensure proper
notification mechanisms between qdiscs.
Note this is best-effort, it is hard to play with those parameters
perfectly to always trigger ->qlen_notify().
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250403211636.166257-4-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a test case for FQ_CODEL with QFQ parent to verify packet drop
behavior when the queue becomes empty. This helps ensure proper
notification mechanisms between qdiscs.
Note this is best-effort, it is hard to play with those parameters
perfectly to always trigger ->qlen_notify().
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250403211636.166257-3-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a test case for FQ_CODEL with HTB parent to verify packet drop
behavior when the queue becomes empty. This helps ensure proper
notification mechanisms between qdiscs.
Note this is best-effort, it is hard to play with those parameters
perfectly to always trigger ->qlen_notify().
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250403211636.166257-2-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hds.py has been testing 0(set_hds_thresh_zero()),
MAX(set_hds_thresh_max()), GT(set_hds_thresh_gt()) values for hds-thresh.
However if a hds-thresh value was already 0, set_hds_thresh_zero()
can't test properly.
So, it tests random value first and then tests 0, MAX, GT values.
Testing bnxt:
TAP version 13
1..13
ok 1 hds.get_hds
ok 2 hds.get_hds_thresh
ok 3 hds.set_hds_disable # SKIP disabling of HDS not supported by
the device
ok 4 hds.set_hds_enable
ok 5 hds.set_hds_thresh_random
ok 6 hds.set_hds_thresh_zero
ok 7 hds.set_hds_thresh_max
ok 8 hds.set_hds_thresh_gt
ok 9 hds.set_xdp
ok 10 hds.enabled_set_xdp
ok 11 hds.ioctl
ok 12 hds.ioctl_set_xdp
ok 13 hds.ioctl_enabled_set_xdp
# Totals: pass:12 fail:0 xfail:0 xpass:0 skip:1 error:0
Testing lo:
TAP version 13
1..13
ok 1 hds.get_hds # SKIP tcp-data-split not supported by device
ok 2 hds.get_hds_thresh # SKIP hds-thresh not supported by device
ok 3 hds.set_hds_disable # SKIP ring-set not supported by the device
ok 4 hds.set_hds_enable # SKIP ring-set not supported by the device
ok 5 hds.set_hds_thresh_random # SKIP hds-thresh not supported by
device
ok 6 hds.set_hds_thresh_zero # SKIP ring-set not supported by the
device
ok 7 hds.set_hds_thresh_max # SKIP hds-thresh not supported by
device
ok 8 hds.set_hds_thresh_gt # SKIP hds-thresh not supported by device
ok 9 hds.set_xdp # SKIP tcp-data-split not supported by device
ok 10 hds.enabled_set_xdp # SKIP tcp-data-split not supported by
device
ok 11 hds.ioctl # SKIP tcp-data-split not supported by device
ok 12 hds.ioctl_set_xdp # SKIP tcp-data-split not supported by
device
ok 13 hds.ioctl_enabled_set_xdp # SKIP tcp-data-split not supported
by device
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:13 error:0
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250404122126.1555648-3-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Atomic instructions such as 'ldset' in the guest have been observed to
cause an EL1 data abort with FSC 0x35 (IMPLEMENTATION DEFINED fault
(Unsupported Exclusive or Atomic access)) on Neoverse-N3.
Per DDI0487L.a B2.2.6, atomic instructions are only architecturally
guaranteed for Inner/Outer Shareable Normal Write-Back memory. For
anything else the behavior is IMPLEMENTATION DEFINED and can lose
atomicity, or, in this case, generate an abort.
It would appear that selftests sets up the stage-1 mappings as Non
Shareable, leading to the observed abort. Explicitly set the
Shareability field to Inner Shareable for non-LPA2 page tables. Note
that for the LPA2 page table format, translations for cacheable memory
inherit the shareability attribute of the PTW, i.e. TCR_ELx.SH{0,1}.
Suggested-by: Oliver Upton <oupton@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20250405001042.1470552-3-rananta@google.com
[oliver: Rephrase changelog]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The kvm selftest library for arm64 currently configures the hardware
fields, such as shift and mask in the page-table entries and registers,
directly with numbers. While it add comments at places, it's better to
rewrite them with appropriate macros to improve the readability and
reduce the risk of errors. Hence, introduce macros to define the
hardware fields and use them in the arm64 processor library.
Most of the definitions are primary copied from the Linux's header,
arch/arm64/include/asm/pgtable-hwdef.h.
No functional change intended.
Suggested-by: Oliver Upton <oupton@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20250405001042.1470552-2-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Currently, the res_spin_lock test is too chatty as it constantly prints
the test_run results for each iteration in each thread, so in case
verbose output is requested or things go wrong, it will flood the logs
of CI and other systems with repeated messages that offer no valuable
insight. Reduce this by doing assertions when the condition actually
flips, and proceed to break out and exit the threads. We still assert
to mark the test as failed and print the expected and reported values.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250403220841.66654-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
All modules that need CONFIG_CRC_T10DIF already select it, so there is no
need to bother users about the option.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250401221600.24878-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
* The sub-architecture selection Kconfig system has been cleaned up,
the documentation has been improved, and various detections have been
fixed.
* The vector-related extensions dependencies are now validated when
parsing from device tree and in the DT bindings.
* Misaligned access probing can be overridden via a kernel command-line
parameter, along with various fixes to misalign access handling.
* Support for relocatable !MMU kernels builds.
* Support for hpge pfnmaps, which should improve TLB utilization.
* Support for runtime constants, which improves the d_hash()
performance.
* Support for bfloat16, Zicbom, Zaamo, Zalrsc, Zicntr, Zihpm.
* Various fixes, including:
- We were missing a secondary mmu notifier call when flushing the
tlb which is required for IOMMU.
- Fix ftrace panics by saving the registers as expected by ftrace.
- Fix a couple of stimecmp usage related to cpu hotplug.
- purgatory_start is now aligned as per the STVEC requirements.
- A fix for hugetlb when calculating the size of non-present PTEs.
-----BEGIN PGP SIGNATURE-----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=nCJo
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The sub-architecture selection Kconfig system has been cleaned up,
the documentation has been improved, and various detections have been
fixed
- The vector-related extensions dependencies are now validated when
parsing from device tree and in the DT bindings
- Misaligned access probing can be overridden via a kernel command-line
parameter, along with various fixes to misalign access handling
- Support for relocatable !MMU kernels builds
- Support for hpge pfnmaps, which should improve TLB utilization
- Support for runtime constants, which improves the d_hash()
performance
- Support for bfloat16, Zicbom, Zaamo, Zalrsc, Zicntr, Zihpm
- Various fixes, including:
- We were missing a secondary mmu notifier call when flushing the
tlb which is required for IOMMU
- Fix ftrace panics by saving the registers as expected by ftrace
- Fix a couple of stimecmp usage related to cpu hotplug
- purgatory_start is now aligned as per the STVEC requirements
- A fix for hugetlb when calculating the size of non-present PTEs
* tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (65 commits)
riscv: Add norvc after .option arch in runtime const
riscv: Make sure toolchain supports zba before using zba instructions
riscv/purgatory: 4B align purgatory_start
riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator
selftests: riscv: fix v_exec_initval_nolibc.c
riscv: Fix hugetlb retrieval of number of ptes in case of !present pte
riscv: print hartid on bringup
riscv: Add norvc after .option arch in runtime const
riscv: Remove CONFIG_PAGE_OFFSET
riscv: Support CONFIG_RELOCATABLE on riscv32
asm-generic: Always define Elf_Rel and Elf_Rela
riscv: Support CONFIG_RELOCATABLE on NOMMU
riscv: Allow NOMMU kernels to access all of RAM
riscv: Remove duplicate CONFIG_PAGE_OFFSET definition
RISC-V: errata: Use medany for relocatable builds
dt-bindings: riscv: document vector crypto requirements
dt-bindings: riscv: add vector sub-extension dependencies
dt-bindings: riscv: d requires f
RISC-V: add f & d extension validation checks
RISC-V: add vector crypto extension validation checks
...
Current release - regressions:
- 4 fixes for the netdev per-instance locking
Current release - new code bugs:
- consolidate more code between existing Rx zero-copy and uring so that
the latter doesn't miss / have to duplicate the safety checks
Previous releases - regressions:
- ipv6: fix omitted Netlink attributes when using SKIP_STATS
Previous releases - always broken:
- net: fix geneve_opt length integer overflow
- udp: fix multiple wrap arounds of sk->sk_rmem_alloc when it
approaches INT_MAX
- dsa: mvpp2: add a lock to avoid corruption of the shared TCAM
- dsa: airoha: fix issues with traffic QoS configuration / offload,
and flow table offload
Misc:
- touch up the Netlink YAML specs of old families to make them usable
for user space C codegen
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=phQZ
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- four fixes for the netdev per-instance locking
Current release - new code bugs:
- consolidate more code between existing Rx zero-copy and uring so
that the latter doesn't miss / have to duplicate the safety checks
Previous releases - regressions:
- ipv6: fix omitted Netlink attributes when using SKIP_STATS
Previous releases - always broken:
- net: fix geneve_opt length integer overflow
- udp: fix multiple wrap arounds of sk->sk_rmem_alloc when it
approaches INT_MAX
- dsa: mvpp2: add a lock to avoid corruption of the shared TCAM
- dsa: airoha: fix issues with traffic QoS configuration / offload,
and flow table offload
Misc:
- touch up the Netlink YAML specs of old families to make them usable
for user space C codegen"
* tag 'net-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits)
selftests: net: amt: indicate progress in the stress test
netlink: specs: rt_route: pull the ifa- prefix out of the names
netlink: specs: rt_addr: pull the ifa- prefix out of the names
netlink: specs: rt_addr: fix get multi command name
netlink: specs: rt_addr: fix the spec format / schema failures
net: avoid false positive warnings in __net_mp_close_rxq()
net: move mp dev config validation to __net_mp_open_rxq()
net: ibmveth: make veth_pool_store stop hanging
arcnet: Add NULL check in com20020pci_probe()
ipv6: Do not consider link down nexthops in path selection
ipv6: Start path selection from the first nexthop
usbnet:fix NPE during rx_complete
net: octeontx2: Handle XDP_ABORTED and XDP invalid as XDP_DROP
net: fix geneve_opt length integer overflow
io_uring/zcrx: fix selftests w/ updated netdev Python helpers
selftests: net: use netdevsim in netns test
docs: net: document netdev notifier expectations
net: dummy: request ops lock
netdevsim: add dummy device notifiers
net: rename rtnl_net_debug to lock_debug
...
Our CI expects output from the test at least once every 10 minutes.
The AMT test when running on debug kernel is just on the edge
of that time for the stress test. Improve the output:
- print the name of the test first, before starting it,
- output a dot every 10% of the way.
Output after:
TEST: amt discovery [ OK ]
TEST: IPv4 amt multicast forwarding [ OK ]
TEST: IPv6 amt multicast forwarding [ OK ]
TEST: IPv4 amt traffic forwarding torture .......... [ OK ]
TEST: IPv6 amt traffic forwarding torture .......... [ OK ]
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250403145636.2891166-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
YAML specs don't normally include the C prefix name in the name
of the YAML attr. Remove the ifa- prefix from all attributes
in addr-attrs and specify name-prefix instead.
This is a bit risky, hopefully there aren't many users out there.
Fixes: dfb0f7d9d9 ("doc/netlink: Add spec for rt addr messages")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250403013706.2828322-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Command names should match C defines, codegens may depend on it.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Fixes: 4f280376e5 ("selftests/net: Add selftest for IPv4 RTM_GETMULTICAST support")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250403013706.2828322-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a "-l <latency>" param to the rseq test so that the user can override
/dev/cpu_dma_latency, as described by the test's suggested workaround for
not being able to complete enough migrations.
cpu_dma_latency is not a normal file, even as far as procfs files go.
Writes to cpu_dma_latency only persist so long as the file is open, e.g.
so that the kernel automatically reverts back to a power-optimized state
once the sensitive workload completes. Provide the necessary functionality
instead of effectively forcing the user to write a non-obvious wrapper.
Cc: Dongsheng Zhang <dongsheng.x.zhang@intel.com>
Cc: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250401142238.819487-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
