Introduce DRM_WEDGE_RECOVERY_COLD_RESET (BIT(4)) recovery method to handle
scenarios requiring device power cycle.
This method addresses cases where other recovery mechanisms
(driver reload, PCIe reset, etc.) are insufficient to restore device
functionality. When set, it indicates to userspace that only device power
cycle can recover the device from its current error state.
Signed-off-by: Mallesh Koujalagi <mallesh.koujalagi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link:
https://patch.msgid.link/20260805071152.1225416-7-mallesh.koujalagi@intel.com
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Define a new netlink event 'error-event' and a new multicast group
'error-report' in drm_ras. Each event contains device name, node and
error information to identify the error triggering the event.
Add drm_ras_nl_error_event() to trigger an event from the driver.
Userspace must subscribe to 'error-report' to receive 'error-event'
notifications.
Usage:
$ sudo ynl --family drm_ras --subscribe error-report
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20260810112008.1858731-5-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
UAPI Changes:
cgroup:
- dmem: accept one region per limit
drm:
- send per-connector hotplug events
Core Changes:
buddy:
- tests: test buffer clearence on resume
panel:
- implement ref counting for struct drm_panel throughout the DRM tree
Driver Changes:
etnaviv:
- force flush on power register ops
gma:
- replace simple-kms helpers with regular atomic helpers
- clean up
host1x:
- support Tegra264 plus DT bindings
- fix minor issues throughout driver
hypervdrm:
- clean up PCI-device binding
imagination:
- mark BXM-4-64 MC1 (36.52.104.182) as supported
- clean up
ivpu:
- clean up
nouveau:
- remove redundant call to pm_runtime_mark_last_busy()
panel:
- support Novatek NT36536 plus DT bindings
- sofef00: fix backlight updates
- osd101t2587: use mipi_dsi_*_multi interface
- panel-edp: adjust timing for AUO displays
- panel-lvds: support Opto Logic SCX1001511GGC49
- panel-simple: support Kyocera tcg070wvlq
panfrost:
- clean up
solomon:
- clean up variables
tve200:
- add OF module alias for autoloading
v3d:
- fix job BO handling
vc4:
- ref i2c-adapter module
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmpjHwYbFIAAAAAABAAO
bWFudTIsMi41KzEuMTIsMiwyAAoJEGgNwR1TC3ojxQwH/A03jX2cGZK5TiwFX0Zk
Y09nJN008Zysmvincbaze01959ccKgM3xi5p4qY2EHFCdzD3AIAPW7dEo+f82aPH
dvmjkW2+tWHaitn9YgiZY7igp5tFQaie3q4QaWyP5Ws4NYdFJfTknPJwof+XQmPb
nAl6Ut4ZiawvKrg6NMseVfP8oFYGfFsGpGVWTFTXV+BwzocceT484B6CpJ5c7Z/F
Q0xJWBsd+o8E4hozCANRbbwcpwabnuGXgXgxMi+y+XovtsIFH7+4xdV88RksnhAD
9CuCaJPkTN08rQgtTAYCccIbxlEoi589bCr+odGxwYuSejVzg69JxmrtmNM2fCc+
tQM=
=9jIF
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-07-24' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.3:
UAPI Changes:
cgroup:
- dmem: accept one region per limit
drm:
- send per-connector hotplug events
Core Changes:
buddy:
- tests: test buffer clearence on resume
panel:
- implement ref counting for struct drm_panel throughout the DRM tree
Driver Changes:
etnaviv:
- force flush on power register ops
gma:
- replace simple-kms helpers with regular atomic helpers
- clean up
host1x:
- support Tegra264 plus DT bindings
- fix minor issues throughout driver
hypervdrm:
- clean up PCI-device binding
imagination:
- mark BXM-4-64 MC1 (36.52.104.182) as supported
- clean up
ivpu:
- clean up
nouveau:
- remove redundant call to pm_runtime_mark_last_busy()
panel:
- support Novatek NT36536 plus DT bindings
- sofef00: fix backlight updates
- osd101t2587: use mipi_dsi_*_multi interface
- panel-edp: adjust timing for AUO displays
- panel-lvds: support Opto Logic SCX1001511GGC49
- panel-simple: support Kyocera tcg070wvlq
panfrost:
- clean up
solomon:
- clean up variables
tve200:
- add OF module alias for autoloading
v3d:
- fix job BO handling
vc4:
- ref i2c-adapter module
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260724082204.GA18774@linux.fritz.box
Since the very day epoch_counter in drm_connector was introduced, its
documentation was not accurate. It claims it's used to detect "any other
changes [...] besides status", when in reality, it's used to detect
changes including status, as a status change also increases the epoch
counter.
Adjust the documentation to rectify this discrepancy.
Fixes: 5186421cbf ("drm: Introduce epoch counter to drm_connector")
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260526-hot-plug-passup-v10-1-f62351a9ea3e@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- blend: allow blend mode property without PREMULTI
- bridges:
- Rename drm_for_each_bridge_in_chain_scoped to
drm_for_each_bridge_in_chain
- Drop legacy bridges support
- gpusvm: Code reorganization to give drivers more flexibility
Driver Changes:
- etnaviv: Check if a reset has been successful
- nouveau: Create instmem iomapping at first use
- panthor: Remove redundant cleanup
- qxl: Convert to a simple encoder to a regular one
- bridges:
- Convert all remaining legacy bridges to atomic
- tc358767: clamp the reported AUX read size to the request
- panels:
- novatek-nt37801: Use mipi_dsi_*_multi() functions
- samsung-s6d16d0: Fix prepare error handling
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCaliKpwAKCRAnX84Zoj2+
dn97AYChSha31PCyoicBWbLiovMuDLyZzq7plQz/xdaRI5H0Z5aT1DkDAqeGLl+t
QLeAXKoBfjBp6OtRA7gBjEfwZPFpud58WxEmni4dU8hdHBQ1JW1R2ximQlsq5Y/A
/DESpMRzHg==
=9oKX
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-07-16' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 7.3:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- blend: allow blend mode property without PREMULTI
- bridges:
- Rename drm_for_each_bridge_in_chain_scoped to
drm_for_each_bridge_in_chain
- Drop legacy bridges support
- gpusvm: Code reorganization to give drivers more flexibility
Driver Changes:
- etnaviv: Check if a reset has been successful
- nouveau: Create instmem iomapping at first use
- panthor: Remove redundant cleanup
- qxl: Convert to a simple encoder to a regular one
- bridges:
- Convert all remaining legacy bridges to atomic
- tc358767: clamp the reported AUX read size to the request
- panels:
- novatek-nt37801: Use mipi_dsi_*_multi() functions
- samsung-s6d16d0: Fix prepare error handling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260716-famous-pastel-ostrich-a1aaef@houat
The Lenovo Legion 5 15ARH05 (Renoir) ships a BOE 0x08DF eDP panel that
advertises AUX/DPCD backlight control, so amdgpu's automatic detection
(amdgpu_backlight == -1) selects AUX. On this panel the AUX backlight
path has no effect: brightness writes are accepted but the panel level
never changes, the display is stuck at a fixed brightness and
max_brightness is reported as a bogus 511000. As a result neither the
desktop brightness slider nor the brightness hotkeys do anything.
Forcing PWM backlight (amdgpu.backlight=0) restores working control:
max_brightness becomes 65535 and the level tracks writes. This has long
been applied by users as a manual kernel-parameter workaround.
Extend the generic panel backlight quirk with a force_pwm flag, add an
entry for the Legion 5 15ARH05 / BOE 0x08DF panel, and have amdgpu
disable AUX backlight (use PWM) when the quirk matches and the user
lets the driver auto-select the backlight type.
Signed-off-by: Alessandro Rinaldi <ale@alerinaldi.it>
Tested-by: Alessandro Rinaldi <ale@alerinaldi.it>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All bridge drivers have been converted to the atomic variants of the
enable, disable, pre_enable, and post_disable callbacks.
Remove the deprecated legacy hooks from drm_bridge_funcs, the
drm_bridge_is_atomic() helper that was only needed to distinguish
between atomic and non-atomic bridges, and the legacy bridge test
cases.
Since all bridges are now atomic, unconditionally initialize the
private object state at attach time.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260707-drm-all-atomic-bridges-v2-37-21d03cbca446@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_for_each_bridge_in_chain_scoped() was added in commit e46efc6a7d
("drm/bridge: add drm_for_each_bridge_in_chain_scoped()") to provide a
safer alternative to drm_for_each_bridge_in_chain().
Following commits converted all users to the _scoped variant.
Finally commit 2f08387a44 ("drm/bridge: remove
drm_for_each_bridge_in_chain()") removed the old
drm_for_each_bridge_in_chain() macro.
It's time to rename drm_for_each_bridge_in_chain_scoped() back to the
original name.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patch.msgid.link/20260630-drm-bridge-alloc-getput-for_each_bridge-2-v2-1-e0a1094cd1eb@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The core mechanism of drm_gpusvm is HMM, which is fundamentally an
MM side subsystem. A drm_device, enters the picture on the device side at
DMA mapping / GPU bind.
So move struct drm_device from struct drm_gpusvm in drm_gpusvm. Let
drm_gpusvm keep its core neutral and leave device side decisions to
the driver. Make drm_gpusvm a pure MM level object.
- Move the drm_device from struct drm_gpusvm. drm_device now stored in
drm_gpusvm_pages.
- Drop the drm parameter from drm_gpusvm_init()
- Update the xe call sites in xe_svm_init() and other callers.
drm_device does not disappear from the framework, it is
relocated onto each drm_gpusvm_pages where DMA actually happens.
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Honglei Huang <honghuan@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260630102127.392396-6-honghuan@amd.com
Since the pages the physical pages and MM VA range has been abstractly
separated. Unbinding a single form of physical page from the MM VA
range, brings flexibility to the drm gpu SVM framework, transfer the
way of management of MM and device physical pages to the driver layer.
framework's range embedded pages object and its range level wrappers
have no users left. Remove the following:
- Drop pages in drm_gpusvm_range.
- Drop drm_gpusvm_range_pages_valid(), drm_gpusvm_range_get_pages()
and drm_gpusvm_range_unmap_pages(); drivers should use the
drm_gpusvm_pages helpers (drm_gpusvm_pages_valid,
drm_gpusvm_get_pages, drm_gpusvm_unmap_pages) directly on a
pages object they own.
- Drop the notifier_seq seeding in drm_gpusvm_range_alloc();
drivers initialise notifier_seq on their own pages object.
Update the DOC: overview to match the new model: document struct
drm_gpusvm_pages and the driver owned 1:1 / N:1 layouts, and rewrite the
usage examples to operate on a driver embedded pages object by the
drm_gpusvm_pages helpers instead of the removed range level wrappers.
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Honglei Huang <honghuan@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260630102127.392396-5-honghuan@amd.com
With drm_gpusvm_pages now self contained, make xe stop relying
on the drm_gpusvm_range pages and take responsibility for the page
lifecycle on the driver side.
Driver side (xe):
- Embed struct drm_gpusvm_pages in xe_svm_range and route all
xe accesses through it instead of range->base.pages.
- Initialise the embedded pages via drm_gpusvm_init_pages(), which
binds the owning &xe->drm up front, and take over the page
lifecycle: xe_svm_range_get_pages() calls drm_gpusvm_get_pages()
directly; the notifier event_end and xe_svm_range_free() paths
drive unmap/free on the embedded pages object.
- Convert the open-coded userptr pages init in xe_userptr_setup()
to the same drm_gpusvm_init_pages() helper.
- Switch xe_svm_range_pages_valid() to drm_gpusvm_pages_valid().
Framework side (drm_gpusvm):
- Add a small inline drm_gpusvm_init_pages() helper that records the
owning drm_device and initialises the per-pages state, giving
drivers a single hook to extend.
- Export drm_gpusvm_pages_valid() to let driver owned pages
can query mapping state without going through a range.
- Lifecycle change: drm_gpusvm_range_remove() no longer *triggers*
unmap/free of the embedded pages. The unmap/free logic itself stays
in the framework -- drm_gpusvm_free_pages() still performs the DMA
unmap (as an idempotent backstop) and frees the dma_addr array --
but the driver now owns *when* it runs, since the driver owns the
drm_gpusvm_pages object.
Side effect / contract: a driver that owns a drm_gpusvm_pages is now
responsible for its lifecycle: drm_gpusvm_init_pages() before first
use, and drm_gpusvm_free_pages() when the owner goes away. Xe does the
latter from its ops->range_free callback, which the framework invokes
once the range refcount drops to zero in drm_gpusvm_range_remove().
The timely DMA unmap for the IOMMU security model still happens in the
notifier invalidate path via drm_gpusvm_unmap_pages(); the unmap inside
drm_gpusvm_free_pages() is only a backstop for pages that were never
invalidated.
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Honglei Huang <honghuan@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260630102127.392396-4-honghuan@amd.com
drm_gpusvm_pages is the layer that actually represents physical
pages/mappings it owns the dma_addr array, the dma_iova_state...
With the previous patch, so drm_gpusvm_pages is now strictly about
physical pages and their DMA view.
Since now the drm_gpusvm_pages instance is inherently bound to one
specific drm_device, make that ownership explicit by giving
drm_gpusvm_pages its own drm_device handle, and drive all DMA through
it instead of through the gpusvm:
- Add drm to struct drm_gpusvm_pages and route all DMA in
drm_gpusvm_get_pages() / __drm_gpusvm_unmap_pages() through
svm_pages->drm instead of gpusvm->drm.
- Bind svm_pages->drm where the pages object is initialised
(drm_gpusvm_range_alloc() and the xe userptr setup) and require
it to be set on entry to drm_gpusvm_get_pages(); the dma device
is immutable for the lifetime of the pages instance. A later
patch introduces drm_gpusvm_init_pages() to centralise this.
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Honglei Huang <honghuan@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260630102127.392396-3-honghuan@amd.com
drm_gpusvm_pages_flags currently mixes two status:
- MM / virtual-address state: whether the range has been (partially)
unmapped by the Linux MM, these follow the lifetime of the VMA and
are a single per VA range fact.
- Device mapping state: has_devmem_pages and has_dma_mapping,
which describe the current page mapping status held by device
itself.
Keeping both on the pages object blurs the semantics of the
abstraction of pages and VA range. So move the MM state flags onto the
range, and keep drm_gpusvm_pages_flags strictly for mapping state.
- Introduce drm_gpusvm_range_flags { migrate_devmem, unmapped,
partial_unmap } on drm_gpusvm_range.
- Shrink drm_gpusvm_pages_flags to just has_devmem_pages and
has_dma_mapping.
Side effect: drivers now need to check the unmap flags in the driver
itself to avoid handling the unmapped pages.
Mirror that bit onto drm_gpusvm_pages so the framework can
still short circuit drm_gpusvm_get_pages() under the notifier lock, and
make drm_gpusvm_range_set_unmapped() propagate it to the backing pages.
This follows Matt's review fixup for the v0 series; see the Link below.
Like drm_gpusvm_pages_flags, drm_gpusvm_range_flags unions its bits with
a u16 __flags member. Build the new value in a local copy and publish it
with a single WRITE_ONCE() on __flags, and have the lockless readers use
READ_ONCE(), so concurrent bitfield access stays data-race free and KCSAN
quiet.
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: 623f6a50c0
Signed-off-by: Honglei Huang <honghuan@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260630102127.392396-2-honghuan@amd.com
The old of_drm_get_panel_orientation() function was replaced by the
drm_of_get_panel_orientation() in the core DRM OF helpers. Replace all
uses of the old helper and remove it.
Changes in v5:
- also convert r63419 panel
Changes in v4:
- also convert anbernic, chipone and ili9488 panels
Changes in v2:
- include drm_of.h in all drivers to make sure the new symbol is defined
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260701121055.192475-4-tzimmermann@suse.de
Implement drm_of_get_panel_orientation() to retrieve a panel's
rotation property as enum drm_panel_orientation. The code has
been taken from of_drm_get_panel_orientation(), so convert that
helper over. Callers of the old helper can be converted as well.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260701121055.192475-2-tzimmermann@suse.de
commit 4827d6d83f ("drm/sched: Remove racy hack from
drm_sched_fini()") removed the necessity to mark an entity as stopped in
drm_sched_fini(). The documentation, however, still details that.
Update sched_entity's documentation.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20260629083631.2547199-2-phasta@kernel.org
When a new mapping intersects with an existing GPU VA, but either
end lies before or beyond the existing VA's edges, then the prev
and next mapping operations part of a remap will reflect this
condition by being set to NULL.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://patch.msgid.link/20260608-gpuvm-minor-fixes-v2-2-af07ef9ca969@collabora.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Parse the Display Parameters Data Block (tag 0x21) defined in
DisplayID v2.1a Section 4.2.6. Extract the Display Device Technology
field from the color depth and device technology byte, which indicates
whether the panel uses LCD or OLED technology.
Add a panel_type field to struct drm_display_info and populate it
during DisplayID iteration so downstream drivers can use it for
panel-type-dependent behavior. Add DRM_MODE_PANEL_TYPE_LCD to the UAPI
panel type property alongside the existing OLED value.
Assisted-by: Copilot:Claude-Opus-4.6
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260526030254.1460480-3-chen-yu.chen@amd.com
Signed-off-by: Mario Limonciello <superm1@kernel.org>
sysfb
- drm/sysfb truncation and alignment fixes.
edid:
- fix edid OOB read in tile parsing
- increase displayid topology id to correct size.
nouveau:
- fix error handling paths in nouveau
amdxdna:
- get_bo_info fix.
ivpu:
- fix leak when error handling in ivpu.
-----BEGIN PGP SIGNATURE-----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=eLQl
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2026-06-27' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"These are just the fixes from our fixes branch, all pretty small and
scattered.
sysfb:
- drm/sysfb truncation and alignment fixes
edid:
- fix edid OOB read in tile parsing
- increase displayid topology id to correct size
nouveau:
- fix error handling paths in nouveau
amdxdna:
- get_bo_info fix
ivpu:
- fix leak when error handling in ivpu"
* tag 'drm-fixes-2026-06-27' of https://gitlab.freedesktop.org/drm/kernel:
drm/sysfb: Avoid truncating maximum stride
drm/sysfb: Return errno code from drm_sysfb_get_visible_size()
drm/sysfb: Avoid possible truncation with calculating visible size
drm/sysfb: Do not page-align visible size of the framebuffer
drm/edid: fix OOB read in drm_parse_tiled_block()
drm/nouveau: fix reversed error cleanup order in ucopy functions
drm/nouveau/acr: fix missing nvkm_done() in error path of nvkm_acr_oneinit()
accel/amdxdna: Use caller client for debug BO sync
drm/displayid: fix Tiled Display Topology ID size
accel/ivpu: fix HWS command queue leak on registration failure
Add a new mode matching flag DRM_MODE_MATCH_TIMINGS_VRR. This is
identical to DRM_MODE_MATCH_TIMINGS, except it requires the vsync
pulse to remain anchored to the end of vtotal, as opposed to the
start of the frame. VRR capable hardware can therefore treat
matching modes as just variants of the same mode with a different
vblank lengths.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260622213602.7244-3-ville.syrjala@linux.intel.com
Tested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Replace the gem-vram memory manager with gem-shmem. Makes the driver more
robust and enables dma-buf sharing with other hardware.
Gem-vram was created from various drivers that used TTM for their memory
management. All these drivers have meanwhile been converted to gem-shmem.
Using gem-vram is deprecated because it has several problems.
* TTM requires significant overcommitment of video memory for reliable
page flips. There needs to be 3 times the size of the largest possible
framebuffer available or page flips can fail. This leaves the display
dark without further warning. Hibmc hardware with 32 MiB and a maximum
framebuffer size of 1920x2000 is at the limit.
* No dma-buf sharing without GTT support. Neither gem-vram nor hibmc
hardware support a GTT address space. This is required to share buffers
with other devices via dma-buf interfaces.
* TTM requires hardware-accelerated rendering into video memory for
optimal results. As hibmc hardware cannot do this, hibmc renders in
system memory and copies the result to video memory. This can be more
effectively implemented with gem-shmem and DRM's shadow-plane helpers.
Converting hibmc to gem-shmem and shadow-plane helpers.
* Replace gem-vram entry points in struct drm_driver with gem-shmem
equivalents. This makes the driver allocate struct drm_gem_shmem_object
for its buffers.
* Use DRM_GEM_SHADOW_*_PLANE for its plane funcs and plane-helper
funcs. The shadow-plane helpers map a plane's gem buffer objects into
kernel address space during a page flip, so that atomic_update can
copy them to video memory.
* Handle framebuffer damage in hibmc_plane_atomic_update(). This updates
video memory from the plane's framebuffer. It automatically synchronizes
shared buffers with other devices. Create the framebuffer with
drm_gem_fb_create_with_dirty() to trigger the update on each page flip.
* Initialize the plane with drm_plane_enable_fb_damage_clips() to limit
the damage updates to the framebuffer areas that changed. We don't want
to do a full-buffer memcpy if only a small area has changed.
* Test display modes against the available video memory in
hibmc_mode_config_mode_valid(). We only want to announce display modes
that fit into display memory.
* Map the display memory itself into kernel address space.
* Do not set drm_mode_config.prefer_shadow. This would advise user space
to install a shadow buffer. But with gem-shmem, the gem buffer object
already acts as a shadow buffer for video memory.
We use these patterns in many other drivers with similar limitation as
hibmc and its hardware. With these changes in place, hibmc is more robust
and better integrated into the overall DRM framework.
v3:
- fix coding style
v2:
- do not select TTM symbols
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Yongbang Shi <shiyongbang@huawei.com>
Link: https://patch.msgid.link/20260618123142.92298-7-tzimmermann@suse.de
Define macros used for decoding DSC max bpp delta values
from the sink DPCD. This includes per-format masks for
RGB/YCbCr444 and YCbCr420, as well as definitions for delta
scaling and the YCbCr420 bit shift. Also add version_1 as
suffix to MAX_DELTA_BPP.
v2: Move constants under 0x6E register. [Ankit]
Add mask for Native 422 also. [Ankit]
v3: Rename _DSC_NATIVE4222 to _DSC_NATIVE_YCbCr422. [Ankit]
v4: Move Version_1 edit ti patch_1. [Ankit]
Add shift mask for native also. [sashiko]
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260623094236.1586318-4-nemesa.garg@intel.com
Rename DP_DSC_RGB_YCbCr420_MAX_BPP_DELTA_MASK to
DP_DSC_NATIVE_YCbCr420_MAX_BPP_DELTA_MASK to align with
the DP DSC specification, where the field represents the
native YCbCr 4:2:0 format.
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260623094236.1586318-3-nemesa.garg@intel.com
The dsc max bpp delta masks were incorrectly placed
under the DP_DSC_BITS_PER_PIXEL_INC(0x06F) register.
Move these under correct DP_DSC_MAX_BPP_DELTA(0x06E)
register.
v2: Separate patch for correcting register. [Ankit]
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260623094236.1586318-2-nemesa.garg@intel.com
Store tiling function pointer in struct intel_panic instead of struct
intel_framebuffer, and store struct intel_panic pointer instead of
struct intel_framebuffer pointer in struct drm_scanout_buffer private
member.
To make this happen, pass the tiling function pointer to panic setup
hook, and initialize sb->private in the hook for clarity.
This allows us to drop the dependency on struct intel_framebuffer from
i915 and xe panic code.
Note: It would be less verbose to have a typedef for the tiling function
pointer. However, there isn't a nice location for it that wouldn't also
increase header interdependencies.
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/d97abae79db3437c617cd4cb6193ba017b3a8d78.1780394867.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
There are no remaining users of the atomic_reset hook. Remove it
from the core.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-78-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
All drivers have been converted to the atomic_create_state callback
and its drm_atomic_helper_bridge_create_state() helper.
Remove the deprecated drm_atomic_helper_bridge_reset().
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-74-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The drm_atomic_helper_bridge_reset() helper is deprecated in favour
of the new atomic_create_state callback.
Add drm_atomic_helper_bridge_create_state() as the counterpart helper
for this new callback, and make drm_atomic_helper_bridge_reset() call
this new helper.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-7-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Commit 47b5ac7daa ("drm/atomic: Add new atomic_create_state callback
to drm_private_obj") introduced a new pattern for allocating drm object
states: atomic_create_state, a dedicated hook that allocates and
initializes a pristine state without any side effect.
The bridge atomic_reset callback is already fallible and in practice
only allocates and initializes state without touching hardware.
However, the reset name does not make this contract clear: callers
and implementers cannot tell from the name alone whether the hardware
will be affected or when the hook is safe to call.
Add an atomic_create_state callback to drm_bridge_funcs to make the
contract explicit: allocate a pristine state, initialize it, no side
effects. The core calls it when available, falling back to
atomic_reset otherwise.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-6-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The convention for state init helpers is to pass the state pointer
as the first argument and the object pointer second.
__drm_atomic_helper_bridge_state_init() has them in the opposite
order. Swap the arguments to follow the convention, and update the
cdns-mhdp8546 caller.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-4-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
__drm_atomic_helper_bridge_reset() is used to initialize a
newly allocated drm_bridge_state, and is being typically called by the
drm_bridge_funcs.atomic_reset implementation.
Since we want to consolidate DRM objects state allocation around the
atomic_create_state callback that will only allocate and initialize a
new drm_bridge_state instance, we will need to call
__drm_atomic_helper_bridge_reset() from both the atomic_reset and
atomic_create_state hooks.
To avoid any confusion, we can thus rename
__drm_atomic_helper_bridge_reset() to
__drm_atomic_helper_bridge_state_init().
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-3-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Headers under include/ aren't supposed to try to include headers from
driver directories, such as i915_reg_defs.h. Remove it.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20260615152837.1898991-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The Tiled Display Topology ID of a DisplayID Tiled Display Topology Data
Block consists of three fields:
- Tiled Display Manufacturer/Vendor ID Field (3 bytes)
- Tiled Display Product ID Code Field (2 bytes)
- Tiled Display Serial Number Field (4 bytes)
i.e. a total of 9 bytes, not 8.
The DisplayID Tiled Display Topology ID is used as the tile group
identifier.
Update both struct displayid_tiled_block topology_id member and struct
drm_tile_group group_data member to full 9 bytes.
The group data was missing the last byte of the serial number. I don't
know whether there are known bug reports that might be linked to this,
but it's plausible the last byte could be the differentiating part for
the tile groups, and fewer tile groups might have been created than
intended.
Fixes: b49b55bd4f ("drm/displayid: add displayid defines and edid extension (v2)")
Fixes: 138f9ebb97 ("drm: add tile_group support. (v3)")
Cc: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org # v3.19+
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260610141549.555605-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
