Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Anton Protopopov <aspsk@isovalent.com>
Link: https://lore.kernel.org/bpf/20250310032045.651068-1-nichen@iscas.ac.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The Makefile uses the exit code of the `llvm-config --link-static --libs`
command to choose between statically-linked and dynamically-linked LLVMs.
The stdout and stderr of that command are redirected to /dev/null.
To redirect the output the "&>" construction is used, which might not be
supported by /bin/sh, which is executed by make for $(shell ...) commands.
On such systems the test will fail even if static LLVM is actually
supported. Replace "&>" by ">/dev/null 2>&1" to fix this.
Fixes: 2a9d30fac8 ("selftests/bpf: Support dynamically linking LLVM if static is not available")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/bpf/20250310145112.1261241-1-aspsk@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The BPF cpumask selftests are currently run twice in
test_progs/cpumask.c, once by traversing cpumask_success_testcases, and
once by invoking RUN_TESTS(cpumask_success). Remove the invocation of
RUN_TESTS to properly run the selftests only once.
Now that the tests are run only through cpumask_success_testscases, add
to it the missing test_refcount_null_tracking testcase. Also remove the
__success annotation from it, since it is now loaded and invoked by the
runner.
Signed-off-by: Emil Tsalapatis (Meta) <emil@etsalapatis.com>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250309230427.26603-5-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add selftests for the bpf_cpumask_populate helper that sets a
bpf_cpumask to a bit pattern provided by a BPF program.
Signed-off-by: Emil Tsalapatis (Meta) <emil@etsalapatis.com>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250309230427.26603-3-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_lwt_seg6local.sh isn't used by the BPF CI.
Add a new file in the test_progs framework to migrate the tests done by
test_lwt_seg6local.sh. It uses the same network topology and the same BPF
programs located in progs/test_lwt_seg6local.c.
Use the network helpers instead of `nc` to exchange the final packet.
Remove test_lwt_seg6local.sh and its Makefile entry.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250307-seg6local-v1-2-990fff8f180d@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some routes in fb00:: are initialized during setup, even though they
aren't needed by the test as the UDP packets will travel through the
lightweight tunnels.
Remove these unnecessary routes.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250307-seg6local-v1-1-990fff8f180d@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The caller of cap_enable_effective() expects negative error code.
Fix it.
Before:
failed to restore CAP_SYS_ADMIN: -1, Unknown error -1
After:
failed to restore CAP_SYS_ADMIN: -3, No such process
failed to restore CAP_SYS_ADMIN: -22, Invalid argument
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250305022234.44932-1-yangfeng59949@163.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Traffic monitor thread may see dangling stdout as the main thread closes
and reassigns stdout without protection. This happens when the main thread
finishes one subtest and moves to another one in the same netns_new()
scope.
The issue can be reproduced by running test_progs repeatedly with traffic
monitor enabled:
for ((i=1;i<=100;i++)); do
./test_progs -a flow_dissector_skb* -m '*'
done
For restoring stdout in crash_handler(), since it does not really care
about closing stdout, simlpy flush stdout and restore it to the original
one.
Then, Fix the issue by consolidating stdio_restore_cleanup() and
stdio_restore(), and protecting the use/close/assignment of stdout with
a lock. The locking in the main thread is always performed regradless of
whether traffic monitor is running or not for simplicity. It won't have
any side-effect.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20250305182057.2802606-3-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow users to change traffic monitor's print function. If not provided,
traffic monitor will print to stdout by default.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250305182057.2802606-2-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
reset_affinity() and save_ns() are only called in run_one_test(). There is
no need to call stdio_restore() in reset_affinity() and save_ns() if
stdio_restore() is moved right after a test finishes in run_one_test().
Also remove an unnecessary check of env.stdout_saved in crash_handler()
by moving env.stdout_saved assignment to the beginning of main().
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20250305182057.2802606-1-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_lwt_ip_encap.sh isn't used by the BPF CI.
Add a new file in the test_progs framework to migrate the tests done by
test_lwt_ip_encap.sh. It uses the same network topology and the same BPF
programs located in progs/test_lwt_ip_encap.c.
Rework the GSO part to avoid using nc and dd.
Remove test_lwt_ip_encap.sh and its Makefile entry.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250304-lwt_ip-v1-1-8fdeb9e79a56@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add some basic selftests for qspinlock built over BPF arena using
cond_break_label macro.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250306035431.2186189-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement queued spin lock algorithm as BPF program for lock words
living in BPF arena.
The algorithm is copied from kernel/locking/qspinlock.c and adapted for
BPF use.
We first implement abstract helpers for portable atomics and
acquire/release load instructions, by relying on X86_64 presence to
elide expensive barriers and rely on implementation details of the JIT,
and fall back to slow but correct implementations elsewhere. When
support for acquire/release load/stores lands, we can improve this
state.
Then, the qspinlock algorithm is adapted to remove dependence on
multi-word atomics due to lack of support in BPF ISA. For instance,
xchg_tail cannot use 16-bit xchg, and needs to be a implemented as a
32-bit try_cmpxchg loop.
Loops which are seemingly infinite from verifier PoV are annotated with
cond_break_label macro to return an error. Only 1024 NR_CPUs are
supported.
Note that the slow path is a global function, hence the verifier doesn't
know the return value's precision. The recommended way of usage is to
always test against zero for success, and not ret < 0 for error, as the
verifier would assume ret > 0 has not been accounted for. Add comments
in the function documentation about this quirk.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250306035431.2186189-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new cond_break_label macro that jumps to the specified label when
the cond_break termination check fires, and allows us to better handle
the uncontrolled termination of the loop.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250306035431.2186189-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
may_goto instruction does not use any registers,
but in compute_insn_live_regs() it was treated as a regular
conditional jump of kind BPF_K with r0 as source register.
Thus unnecessarily marking r0 as used.
Fixes: 14c8552db6 ("bpf: simple DFA-based live registers analysis")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250305085436.2731464-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Compute may-live registers before each instruction in the program.
The register is live before the instruction I if it is read by I or
some instruction S following I during program execution and is not
overwritten between I and S.
This information would be used in the next patch as a hint in
func_states_equal().
Use a simple algorithm described in [1] to compute this information:
- define the following:
- I.use : a set of all registers read by instruction I;
- I.def : a set of all registers written by instruction I;
- I.in : a set of all registers that may be alive before I execution;
- I.out : a set of all registers that may be alive after I execution;
- I.successors : a set of instructions S that might immediately
follow I for some program execution;
- associate separate empty sets 'I.in' and 'I.out' with each instruction;
- visit each instruction in a postorder and update corresponding
'I.in' and 'I.out' sets as follows:
I.out = U [S.in for S in I.successors]
I.in = (I.out / I.def) U I.use
(where U stands for set union, / stands for set difference)
- repeat the computation while I.{in,out} changes for any instruction.
On implementation side keep things as simple, as possible:
- check_cfg() already marks instructions EXPLORED in post-order,
modify it to save the index of each EXPLORED instruction in a vector;
- represent I.{in,out,use,def} as bitmasks;
- don't split the program into basic blocks and don't maintain the
work queue, instead:
- do fixed-point computation by visiting each instruction;
- maintain a simple 'changed' flag if I.{in,out} for any instruction
change;
Measurements show that even such simplistic implementation does not
add measurable verification time overhead (for selftests, at-least).
Note on check_cfg() ex_insn_beg/ex_done change:
To avoid out of bounds access to env->cfg.insn_postorder array,
it should be guaranteed that instruction transitions to EXPLORED state
only once. Previously this was not the fact for incorrect programs
with direct calls to exception callbacks.
The 'align' selftest needs adjustment to skip computed insn/live
registers printout. Otherwise it matches lines from the live registers
printout.
[1] https://en.wikipedia.org/wiki/Live-variable_analysis
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250304195024.2478889-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add several ./test_progs tests:
- arena_atomics/load_acquire
- arena_atomics/store_release
- verifier_load_acquire/*
- verifier_store_release/*
- verifier_precision/bpf_load_acquire
- verifier_precision/bpf_store_release
The last two tests are added to check if backtrack_insn() handles the
new instructions correctly.
Additionally, the last test also makes sure that the verifier
"remembers" the value (in src_reg) we store-release into e.g. a stack
slot. For example, if we take a look at the test program:
#0: r1 = 8;
/* store_release((u64 *)(r10 - 8), r1); */
#1: .8byte %[store_release];
#2: r1 = *(u64 *)(r10 - 8);
#3: r2 = r10;
#4: r2 += r1;
#5: r0 = 0;
#6: exit;
At #1, if the verifier doesn't remember that we wrote 8 to the stack,
then later at #4 we would be adding an unbounded scalar value to the
stack pointer, which would cause the program to be rejected:
VERIFIER LOG:
=============
...
math between fp pointer and register with unbounded min value is not allowed
For easier CI integration, instead of using built-ins like
__atomic_{load,store}_n() which depend on the new
__BPF_FEATURE_LOAD_ACQ_STORE_REL pre-defined macro, manually craft
load-acquire/store-release instructions using __imm_insn(), as suggested
by Eduard.
All new tests depend on:
(1) Clang major version >= 18, and
(2) ENABLE_ATOMICS_TESTS is defined (currently implies -mcpu=v3 or
v4), and
(3) JIT supports load-acquire/store-release (currently arm64 and
x86-64)
In .../progs/arena_atomics.c:
/* 8-byte-aligned */
__u8 __arena_global load_acquire8_value = 0x12;
/* 1-byte hole */
__u16 __arena_global load_acquire16_value = 0x1234;
That 1-byte hole in the .addr_space.1 ELF section caused clang-17 to
crash:
fatal error: error in backend: unable to write nop sequence of 1 bytes
To work around such llvm-17 CI job failures, conditionally define
__arena_global variables as 64-bit if __clang_major__ < 18, to make sure
.addr_space.1 has no holes. Ideally we should avoid compiling this file
using clang-17 at all (arena tests depend on
__BPF_FEATURE_ADDR_SPACE_CAST, and are skipped for llvm-17 anyway), but
that is a separate topic.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/1b46c6feaf0f1b6984d9ec80e500cc7383e9da1a.1741049567.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement the arch_bpf_timed_may_goto function using inline assembly to
have control over which registers are spilled, and use our special
protocol of using BPF_REG_AX as an argument into the function, and as
the return value when going back.
Emit call depth accounting for the call made from this stub, and ensure
we don't have naked returns (when rethunk mitigations are enabled) by
falling back to the RET macro (instead of retq). After popping all saved
registers, the return address into the BPF program should be on top of
the stack.
Since the JIT support is now enabled, ensure selftests which are
checking the produced may_goto sequences do not break by adjusting them.
Make sure we still test the old may_goto sequence on other
architectures, while testing the new sequence on x86_64.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250304003239.2390751-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
All tests from test_tunnel.sh have been migrated into test test_progs.
The last test remaining in the script is the test_ipip() that is already
covered in the test_prog framework by the NONE case of test_ipip_tunnel().
Remove the test_tunnel.sh script and its Makefile entry
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-10-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ip6tnl tunnels are tested in the test_tunnel.sh but not in the test_progs
framework.
Add a new test in test_progs to test ip6tnl tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_ipip6() and test_ip6ip6() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-9-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ip6geneve tunnels are tested in the test_tunnel.sh but not in the
test_progs framework.
Add a new test in test_progs to test ip6geneve tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_ip6geneve() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-8-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
geneve tunnels are tested in the test_tunnel.sh but not in the test_progs
framework.
Add a new test in test_progs to test geneve tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_geneve() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-7-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ip6erspan tunnels are tested in the test_tunnel.sh but not in the
test_progs framework.
Add a new test in test_progs to test ip6erspan tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_ip6erspan() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-6-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
erspan tunnels are tested in the test_tunnel.sh but not in the test_progs
framework.
Add a new test in test_progs to test erspan tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_erspan() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-5-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ip6gre tunnels are tested in the test_tunnel.sh but not in the test_progs
framework.
Add a new test in test_progs to test ip6gre tunnels. It uses the same
network topology and the same BPF programs than the script. Disable the
IPv6 DAD feature because it can take lot of time and cause some tests to
fail depending on the environment they're run on.
Remove test_ip6gre() and test_ip6gretap() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-4-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
gre tunnels are tested in the test_tunnel.sh but not in the test_progs
framework.
Add a new test in test_progs to test gre tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_gre() and test_gre_no_tunnel_key() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-3-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
All tests use more or less the same ping commands as final validation.
Also test_ping()'s return value is checked with ASSERT_OK() while this
check is already done by the SYS() macro inside test_ping().
Create helpers around test_ping() and use them in the tests to avoid code
duplication.
Remove the unnecessary ASSERT_OK() from the tests.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-2-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A fair amount of code duplication is present among tests to attach BPF
programs.
Create generic_attach* helpers that attach BPF programs to a given
interface.
Use ASSERT_OK_FD() instead of ASSERT_GE() to check fd's validity.
Use these helpers in all the available tests.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-1-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In order not to pollute CSV output, e.g.:
$ ./veristat -o csv exceptions_ext.bpf.o > test.csv
Using guessed program type 'sched_cls' for exceptions_ext.bpf.o/extension...
Using guessed program type 'sched_cls' for exceptions_ext.bpf.o/throwing_extension...
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Link: https://lore.kernel.org/bpf/20250301000147.1583999-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Before:
./veristat -G @foobar iters.bpf.o
Failed to open presets in 'foobar': Unknown error -2
...
After:
./veristat -G @foobar iters.bpf.o
Failed to open presets in 'foobar': No such file or directory
...
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Link: https://lore.kernel.org/bpf/20250301000147.1583999-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow reading object file list from file.
E.g. the following command:
./veristat @list.txt
Is equivalent to the following invocation:
./veristat line-1 line-2 ... line-N
Where line-i corresponds to lines from list.txt.
Lines starting with '#' are ignored.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Link: https://lore.kernel.org/bpf/20250301000147.1583999-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add tests for freplace behavior with the combination of sleepable
and non-sleepable global subprogs. The changes_pkt_data selftest
did all the hardwork, so simply rename it and include new support
for more summarization tests for might_sleep bit.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250301151846.1552362-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add tests for rejecting sleepable and accepting non-sleepable global
function calls in atomic contexts. For spin locks, we still reject
all global function calls. Once resilient spin locks land, we will
carefully lift in cases where we deem it safe.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250301151846.1552362-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_select_reuseport_kern.c is currently including <stdlib.h>, but it
does not use any definition from there.
Remove stdlib.h inclusion from test_select_reuseport_kern.c
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250227-remove_wrong_header-v1-1-bc94eb4e2f73@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introducing test for veristat, part of test_progs.
Test cases cover functionality of setting global variables in BPF
program.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20250225163101.121043-3-mykyta.yatsenko5@gmail.com
To better verify some complex BPF programs we'd like to preset global
variables.
This patch introduces CLI argument `--set-global-vars` or `-G` to
veristat, that allows presetting values to global variables defined
in BPF program. For example:
prog.c:
```
enum Enum { ELEMENT1 = 0, ELEMENT2 = 5 };
const volatile __s64 a = 5;
const volatile __u8 b = 5;
const volatile enum Enum c = ELEMENT2;
const volatile bool d = false;
char arr[4] = {0};
SEC("tp_btf/sched_switch")
int BPF_PROG(...)
{
bpf_printk("%c\n", arr[a]);
bpf_printk("%c\n", arr[b]);
bpf_printk("%c\n", arr[c]);
bpf_printk("%c\n", arr[d]);
return 0;
}
```
By default verification of the program fails:
```
./veristat prog.bpf.o
```
By presetting global variables, we can make verification pass:
```
./veristat wq.bpf.o -G "a = 0" -G "b = 1" -G "c = 2" -G "d = 3"
```
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20250225163101.121043-2-mykyta.yatsenko5@gmail.com
Update usdt tests to also check for correct behavior of
bpf_usdt_arg_size().
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20250224235756.2612606-2-ihor.solodrai@linux.dev
Add netns cookie test that verifies the helper is now supported and work
in the context of cgroup_skb programs.
Signed-off-by: Mahe Tardy <mahe.tardy@gmail.com>
Link: https://lore.kernel.org/r/20250225125031.258740-2-mahe.tardy@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test gen_prologue and gen_epilogue that generate kfuncs that have not
been seen in the main program.
The main bpf program and return value checks are identical to
pro_epilogue.c introduced in commit 47e69431b5 ("selftests/bpf: Test
gen_prologue and gen_epilogue"). However, now when bpf_testmod_st_ops
detects a program name with prefix "test_kfunc_", it generates slightly
different prologue and epilogue: They still add 1000 to args->a in
prologue, add 10000 to args->a and set r0 to 2 * args->a in epilogue,
but involve kfuncs.
At high level, the alternative version of prologue and epilogue look
like this:
cgrp = bpf_cgroup_from_id(0);
if (cgrp)
bpf_cgroup_release(cgrp);
else
/* Perform what original bpf_testmod_st_ops prologue or
* epilogue does
*/
Since 0 is never a valid cgroup id, the original prologue or epilogue
logic will be performed. As a result, the __retval check should expect
the exact same return value.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250225233545.285481-2-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test if the verifier rejects struct_ops program with __ref argument
calling bpf_tail_call().
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250220221532.1079331-2-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Fix a soft-lockup in BPF arena_map_free on 64k page size
kernels (Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding
kfree_skb to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's
freeze_mutex (Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when
eth_skb_pkt_type is accessing skb data not containing an
Ethernet header (Shigeru Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch
(Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2)
in user space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iIsEABYKADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZ7evlRUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIPwHgD/dTvM00Ck4Q73fPivyT7tcqxeXJlD
D6ggzWl/SG9LAbwA/2/cSgAM9Jm1g7ddvn/S9QaDYOs5GmFl6urq6krs+tYD
=FCs9
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull BPF fixes from Daniel Borkmann:
- Fix a soft-lockup in BPF arena_map_free on 64k page size kernels
(Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding kfree_skb
to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's freeze_mutex
(Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when eth_skb_pkt_type is
accessing skb data not containing an Ethernet header (Shigeru
Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch (Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2) in user
space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests: bpf: test batch lookup on array of maps with holes
bpf: skip non exist keys in generic_map_lookup_batch
bpf: Handle allocation failure in acquire_lock_state
bpf: verifier: Disambiguate get_constant_map_key() errors
bpf: selftests: Test constant key extraction on irrelevant maps
bpf: verifier: Do not extract constant map keys for irrelevant maps
bpf: Fix softlockup in arena_map_free on 64k page kernel
net: Add rx_skb of kfree_skb to raw_tp_null_args[].
bpf: Fix deadlock when freeing cgroup storage
selftests/bpf: Add strparser test for bpf
selftests/bpf: Fix invalid flag of recv()
bpf: Disable non stream socket for strparser
bpf: Fix wrong copied_seq calculation
strparser: Add read_sock callback
bpf: avoid holding freeze_mutex during mmap operation
bpf: unify VM_WRITE vs VM_MAYWRITE use in BPF map mmaping logic
selftests/bpf: Adjust data size to have ETH_HLEN
bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()
bpf: Remove unnecessary BTF lookups in bpf_sk_storage_tracing_allowed
Current release - regressions:
- core: fix race of rtnl_net_lock(dev_net(dev)).
Previous releases - regressions:
- core: remove the single page frag cache for good
- flow_dissector: fix handling of mixed port and port-range keys
- sched: cls_api: fix error handling causing NULL dereference
- tcp:
- adjust rcvq_space after updating scaling ratio
- drop secpath at the same time as we currently drop dst
- eth: gtp: suppress list corruption splat in gtp_net_exit_batch_rtnl().
Previous releases - always broken:
- vsock:
- fix variables initialization during resuming
- for connectible sockets allow only connected
- eth: geneve: fix use-after-free in geneve_find_dev().
- eth: ibmvnic: don't reference skb after sending to VIOS
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=pEjU
-----END PGP SIGNATURE-----
Merge tag 'net-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Smaller than usual with no fixes from any subtree.
Current release - regressions:
- core: fix race of rtnl_net_lock(dev_net(dev))
Previous releases - regressions:
- core: remove the single page frag cache for good
- flow_dissector: fix handling of mixed port and port-range keys
- sched: cls_api: fix error handling causing NULL dereference
- tcp:
- adjust rcvq_space after updating scaling ratio
- drop secpath at the same time as we currently drop dst
- eth: gtp: suppress list corruption splat in gtp_net_exit_batch_rtnl().
Previous releases - always broken:
- vsock:
- fix variables initialization during resuming
- for connectible sockets allow only connected
- eth:
- geneve: fix use-after-free in geneve_find_dev()
- ibmvnic: don't reference skb after sending to VIOS"
* tag 'net-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
Revert "net: skb: introduce and use a single page frag cache"
net: allow small head cache usage with large MAX_SKB_FRAGS values
nfp: bpf: Add check for nfp_app_ctrl_msg_alloc()
tcp: drop secpath at the same time as we currently drop dst
net: axienet: Set mac_managed_pm
arp: switch to dev_getbyhwaddr() in arp_req_set_public()
net: Add non-RCU dev_getbyhwaddr() helper
sctp: Fix undefined behavior in left shift operation
selftests/bpf: Add a specific dst port matching
flow_dissector: Fix port range key handling in BPF conversion
selftests/net/forwarding: Add a test case for tc-flower of mixed port and port-range
flow_dissector: Fix handling of mixed port and port-range keys
geneve: Suppress list corruption splat in geneve_destroy_tunnels().
gtp: Suppress list corruption splat in gtp_net_exit_batch_rtnl().
dev: Use rtnl_net_dev_lock() in unregister_netdev().
net: Fix dev_net(dev) race in unregister_netdevice_notifier_dev_net().
net: Add net_passive_inc() and net_passive_dec().
net: pse-pd: pd692x0: Fix power limit retrieval
MAINTAINERS: trim the GVE entry
gve: set xdp redirect target only when it is available
...
