If driver_register() returns with error we need to free the memory
allocated for auxdrv->driver.name before returning from
__auxiliary_driver_register()
Fixes: 7de3697e9c ("Add auxiliary bus support")
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210713093438.3173-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable ret is set to -ENOENT and -ENOMEM but this value is never
read as it is overwritten or not used later on, hence it is a
redundant assignment and can be removed.
Cleans up the following clang-analyzer warning:
fs/afs/dir.c:2014:4: warning: Value stored to 'ret' is never read
[clang-analyzer-deadcode.DeadStores].
fs/afs/dir.c:659:2: warning: Value stored to 'ret' is never read
[clang-analyzer-deadcode.DeadStores].
[DH made the following modifications:
- In afs_rename(), -ENOMEM should be placed in op->error instead of ret,
rather than the assignment being removed entirely. afs_put_operation()
will pick it up from there and return it.
- If afs_sillyrename() fails, its error code should be placed in op->error
rather than in ret also.
]
Fixes: e49c7b2f6d ("afs: Build an abstraction around an "operation" concept")
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/1619691492-83866-1-git-send-email-jiapeng.chong@linux.alibaba.com
Link: https://lore.kernel.org/r/162609465444.3133237.7562832521724298900.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/162610729052.3408253.17364333638838151299.stgit@warthog.procyon.org.uk/ # v2
To quote Alexey[1]:
I was adding custom tracepoint to the kernel, grabbed full F34 kernel
.config, disabled modules and booted whole shebang as VM kernel.
Then did
perf record -a -e ...
It crashed:
general protection fault, probably for non-canonical address 0x435f5346592e4243: 0000 [#1] SMP PTI
CPU: 1 PID: 842 Comm: cat Not tainted 5.12.6+ #26
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
RIP: 0010:t_show+0x22/0xd0
Then reproducer was narrowed to
# cat /sys/kernel/tracing/printk_formats
Original F34 kernel with modules didn't crash.
So I started to disable options and after disabling AFS everything
started working again.
The root cause is that AFS was placing char arrays content into a
section full of _pointers_ to strings with predictable consequences.
Non canonical address 435f5346592e4243 is "CB.YFS_" which came from
CM_NAME macro.
Steps to reproduce:
CONFIG_AFS=y
CONFIG_TRACING=y
# cat /sys/kernel/tracing/printk_formats
Fix this by the following means:
(1) Add enum->string translation tables in the event header with the AFS
and YFS cache/callback manager operations listed by RPC operation ID.
(2) Modify the afs_cb_call tracepoint to print the string from the
translation table rather than using the string at the afs_call name
pointer.
(3) Switch translation table depending on the service we're being accessed
as (AFS or YFS) in the tracepoint print clause. Will this cause
problems to userspace utilities?
Note that the symbolic representation of the YFS service ID isn't
available to this header, so I've put it in as a number. I'm not sure
if this is the best way to do this.
(4) Remove the name wrangling (CM_NAME) macro and put the names directly
into the afs_call_type structs in cmservice.c.
Fixes: 8e8d7f13b6 ("afs: Add some tracepoints")
Reported-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: Andrew Morton <akpm@linux-foundation.org>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/YLAXfvZ+rObEOdc%2F@localhost.localdomain/ [1]
Link: https://lore.kernel.org/r/643721.1623754699@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/162430903582.2896199.6098150063997983353.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/162609463957.3133237.15916579353149746363.stgit@warthog.procyon.org.uk/ # v1 (repost)
Link: https://lore.kernel.org/r/162610726860.3408253.445207609466288531.stgit@warthog.procyon.org.uk/ # v2
Since commit d0259c42ab ("spdxcheck.py: Use Python 3"), spdxcheck.py
explicitly expects to run as python3 script, there is no further point
in attempting to test with python2.
Cc: Bert Vermeulen <bert@biot.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210707210600.7266-1-nm@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set the parent pointer of the misc device to ensure a relationship
between PCI and misc dev. That way it is possible to see in
/sys/class/misc/ which pci_endpoint_test instance serves what
PCI device.
Signed-off-by: Richard Weinberger <richard@nod.at>
Link: https://lore.kernel.org/r/20210706154310.26773-1-richard@nod.at
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Return -ENOMEM when kzalloc() fails in order to inform the caller of the
failure.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Link: https://lore.kernel.org/r/20210702133114.GA314157@pc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 1be7107fbe ("mm: larger stack guard gap, between vmas") fixed
up all architectures to deal with the stack guard gap. But when nds32
was added to the tree, it forgot to do the same thing.
Resolve this by properly fixing up the nsd32's version of
arch_get_unmapped_area()
Cc: Nick Hu <nickhu@andestech.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Qiang Liu <cyruscyliu@gmail.com>
Cc: stable <stable@vger.kernel.org>
Reported-by: iLifetruth <yixiaonn@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Link: https://lore.kernel.org/r/20210629104024.2293615-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename module_init & module_exit functions that are named
"mod_init" and "mod_exit" so that they are unique in both the
System.map file and in initcall_debug output instead of showing
up as almost anonymous "mod_init".
This is helpful for debugging and in determining how long certain
module_init calls take to execute.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Christian Gromm <christian.gromm@microchip.com>
Link: https://lore.kernel.org/r/20210711223148.5250-5-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The virtual machine monitor (QEMU) exposes the pvpanic-pci
device to the guest. On guest side the module exists but
currently isn't loaded automatically. So the driver fails
to be probed and does not its job of handling guest panic
events.
Instead of requiring manual modprobe, let's include a device
database using the MODULE_DEVICE_TABLE macro and let the
module auto-load when the guest gets exposed with such a
pvpanic-pci device.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20210629072214.901004-1-eric.auger@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some versions of the MC firmware wrongly report 0 for register base
address of the DPMCP associated with child DPRC objects thus rendering
them unusable. This is particularly troublesome in ACPI boot scenarios
where the legacy way of extracting this base address from the device
tree does not apply.
Given that DPMCPs share the same base address, workaround this by using
the base address extracted from the root DPRC container.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20210715140718.8513-8-laurentiu.tudor@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the endpoint of a device is not yet probed on the bus, force
a rescan of the devices and retry to get a reference to the
endpoint device. If the device is still not found then we assume
it's in a different isolation context (container/DPRC) thus
unavailable and return a permission error.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Link: https://lore.kernel.org/r/20210715140718.8513-7-laurentiu.tudor@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pause the MC firmware when unloading the driver so that it doesn't
crash in certain scenarios, such as kexec.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20210715140718.8513-6-laurentiu.tudor@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a bus notifier to pause the MC firmware as soon as its device
gets discovered. This is needed as the firmware is live thus, as soon
as the SMMU gets probed and enabled, it will crash the firmware due to
SMMU context faults. The firmware will be resumed at probe time, after
the required IOMMU setup was completed.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20210715140718.8513-5-laurentiu.tudor@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fsl-mc bus driver is missing the .shutdown() callback, so add it.
The implementation simply calls the .remove() callback.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20210715140718.8513-4-laurentiu.tudor@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MC firmware has two execution units. Resume them both, as on some
Layerscape SoCs not doing so breaks the firmware.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20210715140718.8513-3-laurentiu.tudor@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPI DMA configure API may return a defer status code, so handle it.
On top of this, move the MC firmware resume after the DMA setup
is completed to avoid crashing due to DMA setup not being done yet or
being deferred.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20210715140718.8513-2-laurentiu.tudor@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Second parameter of dprc_scan_objects() is a bool not a pointer
so change from NULL to false.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20210715140718.8513-1-laurentiu.tudor@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
refcount_t type and corresponding API can protect refcounters from
accidental underflow and overflow and further use-after-free situations.
Acked-by: Dimitri Sivanich <sivanich@hpe.com>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Link: https://lore.kernel.org/r/1626517043-42696-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Verify that feature files are created successfully after mounting a
binderfs instance. Note that only "oneway_spam_detection" feature is
tested with this patch as it is currently the only feature listed.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20210715031805.1725878-3-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document how binder feature files can be used to determine whether a
feature is supported by the binder driver. "oneway_spam_detection" is
used as an example as it is the first available feature file.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20210715031805.1725878-2-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Provide userspace with a mechanism to discover features supported by
the binder driver to refrain from using any unsupported ones in the
first place. Starting with "oneway_spam_detection" only new features
are to be listed under binderfs and all previous ones are assumed to
be supported.
Assuming an instance of binderfs has been mounted at /dev/binderfs,
binder feature files can be found under /dev/binderfs/features/.
Usage example:
$ mkdir /dev/binderfs
$ mount -t binder binder /dev/binderfs
$ cat /dev/binderfs/features/oneway_spam_detection
1
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20210715031805.1725878-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace sprintf() by scnprintf() in order to avoid buffer overflows.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20210630224248.2iq6o6krecx4cz5j@begin
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The older obsolete array initializer syntax is currently being used
for some of the array elements. Fix this by using the preferred C99
array initializers syntax.
Fixes: 5b5140bf51 ("speakup: Separate out translations for bright colors names")
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210715163122.62220-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add maintainer info for the VMware VMCI driver.
v2: moved pv-drivers to L: as private list
Acked-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/1626861766-11115-1-git-send-email-jhansen@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MHI reads the channel ID from the event ring element sent by the
device which can be any value between 0 and 255. In order to
prevent any out of bound accesses, add a check against the maximum
number of channels supported by the controller and those channels
not configured yet so as to skip processing of that event ring
element.
Link: https://lore.kernel.org/r/1624558141-11045-1-git-send-email-bbhatt@codeaurora.org
Fixes: 1d3173a3ba ("bus: mhi: core: Add support for processing events from client device")
Cc: stable@vger.kernel.org #5.10
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210716075106.49938-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devices such as SDX24 do not have the provision for inband wake
doorbell in the form of channel 127 and instead have a sideband
GPIO for it. Newer devices such as SDX55 or SDX65 support inband
wake method by default. Ensure the functionality is used based on
this such that device wake stays held when a client driver uses
mhi_device_get() API or the equivalent debugfs entry.
Link: https://lore.kernel.org/r/1624560809-30610-1-git-send-email-bbhatt@codeaurora.org
Fixes: e3e5e6508f ("bus: mhi: pci_generic: No-Op for device_wake operations")
Cc: stable@vger.kernel.org #5.12
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210716075106.49938-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for Xilinx Versal FPGA manager.
PDI source type can be DDR, OCM, QSPI flash etc..
But driver allocates memory always from DDR, Since driver supports only
DDR source type.
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Link: https://lore.kernel.org/r/20210626155248.5004-6-nava.manne@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The funtionality of xlnx,zynqmp-firmware.txt is replaced with
xlnx,zynqmp-firmware.yaml bindings so this patch removes the
zynqmp-firmware.txt file
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Link: https://lore.kernel.org/r/20210626155248.5004-5-nava.manne@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add documentation to describe Xilinx firmware driver bindings.
Firmware driver provides an interface to firmware APIs.
Interface APIs can be used by any driver to communicate
to Platform Management Unit.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Link: https://lore.kernel.org/r/20210626155248.5004-4-nava.manne@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds load PDI API support to enable full/partial PDI loading
from linux. Programmable Device Image (PDI) is combination of headers,
images and bitstream files to be loaded.
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Link: https://lore.kernel.org/r/20210626155248.5004-2-nava.manne@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
My local syzbot instance hit GPF in ttm_bo_release().
Unfortunately, syzbot didn't produce a reproducer for this, but I
found out possible scenario:
drm_gem_vram_create() <-- drm_gem_vram_object kzalloced
(bo embedded in this object)
ttm_bo_init()
ttm_bo_init_reserved()
ttm_resource_alloc()
man->func->alloc() <-- allocation failure
ttm_bo_put()
ttm_bo_release()
ttm_mem_io_free() <-- bo->resource == NULL passed
as second argument
*GPF*
Added NULL check inside ttm_mem_io_free() to prevent reported GPF and
make this function NULL save in future.
Same problem was in ttm_bo_move_to_lru_tail() as Christian reported.
ttm_bo_move_to_lru_tail() is called in ttm_bo_release() and mem pointer
can be NULL as well as in ttm_mem_io_free().
Fail log:
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
...
RIP: 0010:ttm_mem_io_free+0x28/0x170 drivers/gpu/drm/ttm/ttm_bo_util.c:66
..
Call Trace:
ttm_bo_release+0xd94/0x10a0 drivers/gpu/drm/ttm/ttm_bo.c:422
kref_put include/linux/kref.h:65 [inline]
ttm_bo_put drivers/gpu/drm/ttm/ttm_bo.c:470 [inline]
ttm_bo_init_reserved+0x7cb/0x960 drivers/gpu/drm/ttm/ttm_bo.c:1050
ttm_bo_init+0x105/0x270 drivers/gpu/drm/ttm/ttm_bo.c:1074
drm_gem_vram_create+0x332/0x4c0 drivers/gpu/drm/drm_gem_vram_helper.c:228
Fixes: d3116756a7 ("drm/ttm: rename bo->mem and make it a pointer")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708112518.17271-1-paskripkin@gmail.com
This reverts commit c742199a01.
c742199a01 ("mm/pgtable: add stubs for {pmd/pub}_{set/clear}_huge")
breaks arm64 in at least two ways for configurations where PUD or PMD
folding occur:
1. We no longer install huge-vmap mappings and silently fall back to
page-granular entries, despite being able to install block entries
at what is effectively the PGD level.
2. If the linear map is backed with block mappings, these will now
silently fail to be created in alloc_init_pud(), causing a panic
early during boot.
The pgtable selftests caught this, although a fix has not been
forthcoming and Christophe is AWOL at the moment, so just revert the
change for now to get a working -rc3 on which we can queue patches for
5.15.
A simple revert breaks the build for 32-bit PowerPC 8xx machines, which
rely on the default function definitions when the corresponding
page-table levels are folded, since commit a6a8f7c4aa ("powerpc/8xx:
add support for huge pages on VMAP and VMALLOC"), eg:
powerpc64-linux-ld: mm/vmalloc.o: in function `vunmap_pud_range':
linux/mm/vmalloc.c:362: undefined reference to `pud_clear_huge'
To avoid that, add stubs for pud_clear_huge() and pmd_clear_huge() in
arch/powerpc/mm/nohash/8xx.c as suggested by Christophe.
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: c742199a01 ("mm/pgtable: add stubs for {pmd/pub}_{set/clear}_huge")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
[mpe: Fold in 8xx.c changes from Christophe and mention in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/linux-arm-kernel/CAMuHMdXShORDox-xxaeUfDW3wx2PeggFSqhVSHVZNKCGK-y_vQ@mail.gmail.com/
Link: https://lore.kernel.org/r/20210717160118.9855-1-jonathan@marek.ca
Link: https://lore.kernel.org/r/87r1fs1762.fsf@mpe.ellerman.id.au
Signed-off-by: Will Deacon <will@kernel.org>
Commit cfa7ff959a ("arm64: smccc: Support SMCCC v1.3 SVE register
saving hint") added a call to __arm_smccc_sve_check() which clobbers the
lr (register x30), causing __arm_smccc_hvc() to return to itself and
crash. Save lr on the stack before calling __arm_smccc_sve_check(). Save
the frame pointer (x29) to complete the frame record, and adjust the
offsets used to access stack parameters.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Fixes: cfa7ff959a ("arm64: smccc: Support SMCCC v1.3 SVE register saving hint")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210721071834.69130-1-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
This reverts commit 0bd860493f.
While the patch was working as stated,ie preventing the L850-GL LTE modem
from crashing on some U3 wake-ups due to a race condition between the
host wake-up and the modem-side wake-up, when using the MBIM interface,
this would force disabling the USB runtime PM on the device.
The increased power consumption is significant for LTE laptops,
and given that with decently recent modem firmwares, when the modem hits
the bug, it automatically recovers (ie it drops from the bus, but
automatically re-enumerates after less than half a second, rather than being
stuck until a power cycle as it was doing with ancient firmware), for
most people, the trade-off now seems in favor of re-enabling it by
default.
For people with access to the platform code, the bug can also be worked-around
successfully by changing the USB3 LFPM polling off-time for the XHCI
controller in the BIOS code.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Link: https://lore.kernel.org/r/20210721092516.2775971-1-vpalatin@chromium.org
Fixes: 0bd860493f ("USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gcc report build error as following when CONFIG_WWAN_CORE is not set:
x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_disconnect':
cdc-wdm.c:(.text+0xb2a): undefined reference to `wwan_remove_port'
x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_in_callback':
cdc-wdm.c:(.text+0xf23): undefined reference to `wwan_port_rx'
x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_stop':
cdc-wdm.c:(.text+0x127d): undefined reference to `wwan_port_get_drvdata'
x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_tx':
cdc-wdm.c:(.text+0x12d9): undefined reference to `wwan_port_get_drvdata'
x86_64-linux-gnu-ld: cdc-wdm.c:(.text+0x13c1): undefined reference to `wwan_port_txoff'
x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_start':
cdc-wdm.c:(.text+0x13e0): undefined reference to `wwan_port_get_drvdata'
x86_64-linux-gnu-ld: cdc-wdm.c:(.text+0x1431): undefined reference to `wwan_port_txon'
x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_tx_complete':
cdc-wdm.c:(.text+0x14a4): undefined reference to `wwan_port_txon'
x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_create.cold':
cdc-wdm.c:(.text.unlikely+0x209): undefined reference to `wwan_create_port'
Using CONFIG_WWAN_CORE instead of CONFIG_WWAN to avoid build error.
Fixes: cac6fb015f ("usb: class: cdc-wdm: WWAN framework integration")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210521021010.2490930-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The metadata address is set after the trace event, so the trace is not
capturing anything useful. Rather than logging the memory address, it's
useful to know if the command carries a metadata payload, so change the
trace event to log that true/false state instead.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When the last path to a ns_head drops the current code
removes the ns_head from the subsystem list, but will only
delete the disk itself if the last reference to the ns_head
drops. This is causing an refcounting imbalance eg when
applications have a reference to the disk, as then they'll
never get notified that the disk is in fact dead.
This patch moves the call 'del_gendisk' into nvme_mpath_check_last_path(),
ensuring that the disk can be properly removed and applications get the
appropriate notifications.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This reverts commit eb9b7bfd59 as it
breaks working userspace implementations (i.e. Android systems)
The device node name here is part of configfs, so it is a user-visable
api that can not be changed.
Reported-by: John Stultz <john.stultz@linaro.org>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/CALAqxLX_FNvFndEDWtGbFPjSzuAbfqxQE07diBJFZtftwEJX5A@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sending zero length packet in DDMA mode perform by DMA descriptor
by setting SP (short packet) flag.
For DDMA in function dwc2_hsotg_complete_in() does not need to send
zlp.
Tested by USBCV MSC tests.
Fixes: f71b5e2533 ("usb: dwc2: gadget: fix zero length packet transfers")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/967bad78c55dd2db1c19714eee3d0a17cf99d74a.1626777738.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 0112b7ce68 ("usb: dwc2: Update dwc2_handle_usb_suspend_intr
function.") changed the way the driver handles power down modes in a such
way that it uses clock gating when no other power down mode is available.
This however doesn't work well on the DWC2 implementation used on the
Samsung SoCs. When a clock gating is enabled, system hangs. It looks that
the proper clock gating requires some additional glue code in the shared
USB2 PHY and/or Samsung glue code for the DWC2. To restore driver
operation on the Samsung SoCs simply skip enabling clock gating mode
until one finds what is really needed to make it working reliably.
Fixes: 0112b7ce68 ("usb: dwc2: Update dwc2_handle_usb_suspend_intr function.")
Cc: stable <stable@vger.kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20210716050127.4406-1-m.szyprowski@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver has a potential issue which this driver is possible to
cause superfluous irqs after usb_pkt_pop() is called. So, after
the commit 3af3260528 ("usb: renesas_usbhs: fix error return
code of usbhsf_pkt_handler()") had been applied, we could observe
the following error happened when we used g_audio.
renesas_usbhs e6590000.usb: irq_ready run_error 1 : -22
To fix the issue, disable the tx or rx interrupt in usb_pkt_pop().
Fixes: 2743e7f90d ("usb: renesas_usbhs: fix the usb_pkt_pop()")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210624122039.596528-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because of dwc2_hsotg_ep_stop_xfr() function uses poll
mode, first need to mask GINTSTS_GOUTNAKEFF interrupt.
In Slave mode GINTSTS_GOUTNAKEFF interrupt will be
aserted only after pop OUT NAK status packet from RxFIFO.
In dwc2_hsotg_ep_sethalt() function before setting
DCTL_SGOUTNAK need to unmask GOUTNAKEFF interrupt.
Tested by USBCV CH9 and MSC tests set in Slave, BDMA and DDMA.
All tests are passed.
Fixes: a4f8277145 ("usb: dwc2: gadget: Disable enabled HW endpoint in dwc2_hsotg_ep_disable")
Fixes: 6070636c49 ("usb: dwc2: Fix Stalling a Non-Isochronous OUT EP")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/e17fad802bbcaf879e1ed6745030993abb93baf8.1626152924.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
