select_task_rq_scx() falls into the default path when the scheduler has no
ops.select_cpu or is bypassing. There it calls scx_select_cpu_dfl() and
direct-dispatches to the picked CPU's local DSQ.
While bypassing, neither does anything: the enqueue path routes the task to
a bypass DSQ before consulting the direct-dispatch target, so the direct
dispatch never happens, and the CPU pick at most shifts which CPU's bypass
DSQ receives the task. Worse, when the scheduler does its own idle tracking,
the built-in idle cpumasks the pick consults are not even updated, so it
doesn't work anyway.
Return prev_cpu without the default selection while bypassing and let the
bypass enqueue place the task.
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
check_rq_for_timeouts() blames a runnable stall on the task's owner. Under
a sub-scheduler hierarchy the stalled task can be sitting on a DSQ that a
different scheduler has to drain, e.g. an ancestor's bypass DSQ while the
owner is bypassing. The drainer then escapes blame while the owner is
exited, and when the owner's exit is already claimed, nothing actionable is
reported at all.
Blame the DSQ's owning scheduler instead. The local DSQ is consumed by the
cpu itself and keeps blame on the owner. Detection keeps the owner's timeout
and single-scheduler behavior is unchanged.
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Two unrelated things go by "cgroup" in the cid form. Sub-schedulers attach
to cgroups, and the cgroup_*() ops deliver cpu controller events. While the
ops names suggest cgroup2 hierarchy, they actually operate on the cpu
controller.
Rename them to cpuctl_* in struct sched_ext_ops_cid, which has no users
outside scx_qmap yet. The cpu form is deployed ABI and keeps the old names.
The layout is unchanged and the kernel keeps calling through the cpu-form
union view.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Sub-schedulers don't get cgroups yet: every task_group is inited on the root
sched and the routing added by the previous patches always resolves to it.
Add the handover: an enabling sub-scheduler takes over the cgroups in its
subtree and a disabling one returns them to its parent.
scx_cgroup_claim_subtree() runs while the sub enables, after the subtree's
cgrp->scx_sched's are set and before any task is claimed. It inits each
subtree task_group on the sub, exits it from the parent and updates
tg->scx.sched. A failed ops.cgroup_init() unwinds the sub-side inits and
aborts the enable with the parent untouched.
Disabling reverses it with scx_cgroup_return_subtree(): exit each cgroup
from the sub, then re-init it on the parent with the current tg->scx.*
values, resyncing weight and bandwidth changes made while the sub had it.
When a re-init fails, the parent is failed and the remaining task_groups
still transfer uninited and get no cgroup ops - the same punting done for
tasks. The dying parent's own disable moves them onward.
The handover walks include dying but not yet offlined task_groups, the same
as root's bulk walks: a removed cgroup keeps hosting scheduling events until
its dying tasks finish their final context switches, and its
ops.cgroup_exit() must follow the last of them. tg on/offlining is excluded
through cgroup_lock(), so either ordering against an rmdir of a subtree
cgroup delivers balanced init/exit pairs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
With sub-schedulers claiming cgroup subtrees, cgroup ops must be delivered
to each task_group's sched rather than always to root. Add tg->scx.sched to
track which sched initialized the task_group. It is set and cleared together
with SCX_TG_INITED.
Deliver the ops accordingly:
- ops.cgroup_exit() goes to the sched whose ops.cgroup_init() it pairs with.
- ops.cgroup_prep_move/move/cancel_move() go to the task's sched, and only
for moves that don't re-home the task. A re-homing move is reported
through the ops.exit_task/init_task() pair instead. The cgroups passed to
the move ops can be outside the sched's inited set as the cpu controller
can be coarser than the sub-scheduler topology.
- Knobs of a cgroup belong to the parent, so ops.set_weight/idle/bandwidth()
go to the parent task_group's sched.
All task_groups currently resolve to the root sched, so no behavior changes
until sub-schedulers start claiming cgroups.
While at it, scx_cgroup_init() is restructured so both paths share the
recording.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
A task's sched (p->scx.sched) must match its cgroup's owner
(cgrp->scx_sched). cgroup migration breaks the invariant:
scx_cgroup_move_task() only fires root's ops.cgroup_move() and never
re-homes the task, leading to wrong-sched scheduling and, once the stale
sched is freed, a use-after-free.
Hook into the new cgroup task migration events and re-home each task whose
destination cgroup is owned by a different sched. The events map naturally
to the transfer: MIGRATING runs the fallible init for the destination sched,
letting it reject the migration the same way ops.cgroup_prep_move() can,
MIGRATED does the re-home, which can't fail, and CANCELED undoes the init
when the migration falls through.
Pre-commit, the task's task_group still reflects the source, so
__scx_init_task() grows an explicit cgroup argument for the migration path
to hand ops.init_task() the destination cgroup.
Signed-off-by: Tejun Heo <tj@kernel.org>
Closes: https://lore.kernel.org/r/alnxrsexEe_nQwqL@gpd4
Reviewed-by: Andrea Righi <arighi@nvidia.com>
scx_cgroup_enabled is in the CONFIG_EXT_GROUP_SCHED block. The upcoming
cgroup migration re-homing needs the gate outside the block. Move the
definition and flag flips outside CONFIG_EXT_GROUP_SCHED. No functional
changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Factor out scx_rehome_task() and scx_punt_task() from the sub-disable
re-home loop and scx_fail_parent(). The upcoming cgroup migration re-homing
also needs scx_rehome_task(). No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
A subsystem can attach to the cgroup hierarchy itself, independent of which
controllers are enabled where - BPF hooks already behave this way and
sched_ext sub-schedulers do too. Controller callbacks can't track task
migrations for them: sched_ext must re-home a task whose migration crosses a
sub-scheduler boundary, but the cpu controller's attach callbacks fire only
when the task_group changes and miss moves whenever the controller topology
is coarser than the sub-scheduler topology.
Add cgroup_task_notifier with per-task migration events mirroring the
can_attach/attach/cancel_attach phases so that a consumer which prepares
per-task state can also veto a migration: CGROUP_TASK_MIGRATING fires
pre-commit, CGROUP_TASK_MIGRATED post-commit and
CGROUP_TASK_MIGRATE_CANCELED unwinds a failed migration. Only migrations
that change a task's dfl cgroup are reported.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Pull to receive:
477869bfaf ("sched_ext: Reject setting disallow from init_task outside the enable path")
5f8b69642d ("sched_ext: Take cgroup_lock() first in scx_cgroup_lock()")
8c13364db9 ("sched_ext: Skip sub-disable teardown for never-linked sub-schedulers")
5cdc928598 ("sched_ext: Don't enable non-ext tasks in the sub-sched task loops")
as dependencies for the upcoming cgroup migration patchset and to
resolve the conflicts with the ext.c/sub.c split on for-7.3.
5f8b69642d comments scx_cgroup_lock() which for-7.3 exported for
sub.c. Resolved by keeping the exported version with the comment.
8c13364db9 and 5cdc928598 patch the pre-split sub-sched enable and
disable paths in ext.c which for-7.3 moved to sub.c. Resolved by
applying the never-linked teardown skip and the class gates to sub.c.
Signed-off-by: Tejun Heo <tj@kernel.org>
Root enable and scx_post_fork() enable a task only if it's on the ext class.
Tasks on other classes, possible under an SCX_OPS_SWITCH_PARTIAL root, are
left READY and enabled by switching_to_scx() when they switch over. The sub
enable-commit pass and the sub-disable re-home loop enable unconditionally,
so a fair-class READY task in the subtree becomes ENABLED while not on
sched_ext. A later switch to SCHED_EXT then trips the task state validation
WARN (ENABLED with the previous state not READY) and calls ops.enable() a
second time.
Gate scx_enable_task() on the task's class in both loops.
Fixes: 337ec00b1d ("sched_ext: Implement cgroup sub-sched enabling and disabling")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
A sub-scheduler enable can fail before scx_link_sched() links the sched into
the hierarchy, e.g. when the parent is already being disabled, and cleanup
still runs the full scx_sub_disable().
That is racy against root disable: drain_descendants() is the only ordering
between a sub's disable-time task walk and root disable's all-task teardown,
and an unlinked sub is invisible to it. Root's teardown can thus run between
the never-linked sub's drain and its walk, exiting every task to no
scheduler.
The walk then trips the membership WARN and re-homes the exited tasks onto
the dying hierarchy, a use-after-free.
Skip the cgroup ownership reset and the task walk if @sch was never linked,
indicated by the empty ->sibling as unlinking only happens later in the same
function. The membership WARN remains valid: a linked sub is always waited
on by an ancestor's drain.
Fixes: 337ec00b1d ("sched_ext: Implement cgroup sub-sched enabling and disabling")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
scx_cgroup_lock() write-locks scx_cgroup_ops_rwsem and then takes
cgroup_lock(), which can deadlock through kernfs:
scx enable/disable cgroup rmdir cpu.weight write
------------------ ------------ ----------------
cgroup_lock()
percpu_down_write(rwsem)
cgroup_lock()
kernfs_get_active()
percpu_down_read(rwsem)
kernfs_drain()
The enable path waits for the rmdir to release cgroup_mutex. The rmdir,
deactivating the cpu controller's files, waits in kernfs_drain() for the
write's active reference. The write, in scx_group_set_weight(), waits for
the rwsem behind the pending writer.
Take cgroup_lock() first. The set_* paths take no cgroup locks inside the
read side, so a pending write-lock then only waits for read sections that
always run to completion, and no dependency from the rwsem back to
cgroup_mutex remains.
Fixes: a5bd6ba30b ("sched_ext: Use cgroup_lock/unlock() to synchronize against cgroup operations")
Cc: stable@vger.kernel.org # v6.18+
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
The p->scx.disallow revert assumes the root enable path, where the switching
loop reads the reverted policy right afterwards and leaves the task off SCX.
The sub-scheduler disable path also reaches it when re-initializing the
returned tasks on a root parent. Nothing reads the policy there: the task is
enabled on root anyway and keeps running on the ext class with a silently
rewritten policy.
Kill the sched instead, matching the fork and non-root branches, and update
the disallow documentation, which equated !fork with the load path and
pointed at a stale debugfs path for nr_rejected.
Fixes: 337ec00b1d ("sched_ext: Implement cgroup sub-sched enabling and disabling")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
With CONFIG_EXT_SUB_SCHED=y but no sub-scheduler attached - the common case
- hot paths still pay for sub-sched bookkeeping. Gate it behind
__scx_has_subs, a static key counting live sub-schedulers, so that a
root-only system stops paying.
Most conversions are simple skip-if-no-sub tests. scx_idle_notify() is
special - it's a hierarchy walk, so give it a fast path which notifies the
root directly using the same tests as the walk. A pending
SCX_RQ_SUB_IDLE_RENOTIFY can be ignored as no sub can be owed one and the
caller clears the flag either way.
Suggested-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
rq->scx.sub_dispatch_prev is sub-sched-only but was left unconditional. Move
it into the CONFIG_EXT_SUB_SCHED block next to ecaps_to_sync and gate its
updates.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
scx_dispatch_sched() is common dispatch machinery and looks out of place in
sub.h, but it needs scx_cpu_arg() from cid.h and can't move into internal.h
without creating a circular include. Add inlines.h on top of internal.h and
cid.h, and move the function there. The function was sub.h's only cid.h
user, so drop that include. Pure code move, no functional change.
v2: Host the function in a new inlines.h instead of at internal.h's tail,
which formed a circular include with cid.h. Drop sub.h's now-unused
cid.h include. (sashiko AI)
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
scx_discard_ecaps_to_sync() waited for balance_one() to consume a dying
sched's queued ecaps sync, polling with resched_cpu() + msleep(). The wait
is unbounded - the ext dl_server forces picks through sustained fair or RT
load only while ext tasks are queued, so an ext-idle cpu monopolized by a
higher class can stall the teardown indefinitely.
Remove the node directly instead: take all queued nodes, drop the dying
sched's and resplice the rest. Consumption runs under the rq lock and batch
nodes read as on-list throughout, so the producer-side dedup stays correct.
A node that an in-flight scx_process_sync_ecaps() batch holds across a
dispatch-induced rq unlock still needs a wait, but one bounded by that batch
completing rather than by a future balance.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
A cid-form scheduler can grant caps to and revoke them from its child
sub-schedulers but has no way to tear one down. Add scx_bpf_sub_kill() to
evict a direct child with a printf-style reason that reaches the child's
scx_exit_info. No exit code is taken because the child is a separate
scheduler whose exit-code semantics the parent cannot know. The child and
its subtree are disabled through the usual async path under a new exit kind,
SCX_EXIT_PARENT_KILL.
The bstr formatting infrastructure in ext.c is exposed through internal.h
with scx_ prefixes so the kfunc, which lives in sub.c, can format the
reason.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
scx_process_sync_ecaps() consumes ecaps syncs while the sched is bypassing
without delivering ops.sub_ecaps_updated(), leaving reported_ecaps stale.
Nothing re-queued a sync when bypass lifted, so a cid whose caps never
change again would never be notified. Attach-time initial grants hit this
every time: they are consumed during the enable bypass window, so a sched
never learned its initial effective caps through the callback.
Re-queue a sync for every (sched, cpu) with an undelivered delta at the
per-cpu bypass exit in scx_bypass(), next to the idle renotify catch-up. The
next balance on the cpu then delivers the pending delta with proper dispatch
context.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
__scx_update_idle() notified only the root scheduler. A sub-scheduler that
holds a cid needs that cid's idle state to place and kick on it.
Deliver ops.update_idle() to every scheduler that holds SCX_CAP_BASE on the
transitioning cid. The root holds every cap, so a real transition always
reaches it.
Real transitions are not enough on their own. A cid that is already idle
when a sub-sched gains baseline access produces no transition, so the new
holder would never learn it is idle. The ecaps sync arms a re-notify on the
gain, and the next idle pick delivers ops.update_idle() to just that sched,
leaving holders that already track the cpu untouched. A matching loss of
baseline access drops any pending re-notify.
Bypass suppresses ops.update_idle() too, so a cpu that goes idle during a
bypass window and stays idle yields no transition to re-deliver on
un-bypass. Arm the same re-notify for every sched leaving bypass. The acute
case is a child granted cids during its own ops.sub_attach(). The grant
lands while the child is bypassed and the notify walk skips it, so on
un-bypass it holds cids it never saw go idle. The root is owed the same and
is armed through a separate per-rq flag, which keeps this working when
sub-schedulers are compiled out.
v2: Gate the idle catch-up in pick_task_idle() to avoid a double ops.update_idle(). (sashiko AI)
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
scx_local_or_reject_dsq() authorizes a local-DSQ insert against the caps
of the scheduler doing the insert. On the consume/dispatch paths that is
the scheduler running balance_one(), passed down through
scx_consume_dispatch_q() and move_local_task_to_local_dsq(), so the check
is correct.
The remote-move path loses it. move_remote_task_to_local_dsq()
re-activates @p on the destination rq through enqueue_task_scx(), which
reconstructs the scheduler from the task, i.e. @p's owner. When an
ancestor places a descendant's task - e.g. draining a bypassed
sub-scheduler - the owner is a sub-scheduler of the placer, so
authorizing against the owner checks a narrower cap set and can
spuriously reject a task the placer is entitled to run.
Carry the placing scheduler across the activate_task() boundary the same
way enq_flags already are, via a per-rq field set only for the duration
of the re-activation, and have scx_local_or_reject_dsq() authorize
against it. The placer's caps are a superset of the owner's, so this
admits what the placer may run and keeps rejecting what it may not.
v2: Document @sch in move_remote_task_to_local_dsq()'s kerneldoc. (Andrea)
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
A kick forces a scheduling event on the target cpu, and a preemption also
evicts the running task. Gate both on caps. Any kick requires baseline
access on the cid, and preempting a task the sub-sched does not own -
whether by a SCX_ENQ_PREEMPT insert or a SCX_KICK_PREEMPT kick - requires
the new SCX_CAP_PREEMPT. Gating either alone would leave a hole - the
weakest cap authorizing preempting kicks, or plain kicks disturbing cpus the
kicker has no access to.
Preempting the sched's own subtree is always allowed, and the cap extends
the right to any task on the cid. PREEMPT implies ENQ, and so ENQ_IMMED.
A preempting insert tests the running task under the target rq lock and is
rejected and reenqueued unless the victim is in the inserter's subtree or it
holds PREEMPT. A migration-disabled task is admitted regardless, but with
SCX_ENQ_PREEMPT stripped.
Kicks are enforced on the delivery path, where the effective caps can be
read coherently under the target rq's lock. A kick from a sub-sched lacking
SCX_CAP_BASE on the cid is dropped, and a SCX_KICK_PREEMPT kick without
PREEMPT for a task outside the kicker's subtree degrades to a plain
reschedule.
Unlike the enqueue caps, PREEMPT is checked only at the instant of the
insert or kick, never as a standing property of a queued task.
v2: Clear SCX_ENQ_PREEMPT on the offline and migration_pending force-admits.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Add SCX_CAP_ENQ, which gates inserting tasks onto a cid's local DSQ. Unlike
IMMED enqueue, plain enqueues can pile up, so ENQ is the stronger cap and
implies ENQ_IMMED. Losing ENQ also triggers the reenq scan. The scan tests
each queued task and the running task against the cap each needs via
scx_caps_for_task(), so an ENQ-only loss reenqueues plain tasks, evicting a
running one, while IMMED tasks, which need only ENQ_IMMED, stay put.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
A task's slice grants it cpu occupancy - how long it holds its cpu. In a
sub-scheduler hierarchy cpu access is delegated through revocable
capabilities, so a task's occupancy must follow them. Only its own scheduler
sets its slice, and extending the slice is allowed only while that scheduler
holds baseline cpu access (SCX_CAP_BASE) on the cpu. Otherwise a scheduler
could keep occupying a cpu it has been denied simply by handing out long
slices.
The cap check reads effective caps, which are coherent only under the task's
rq lock, and the kernel decrements the slice under that lock as the task
runs, so a running task's slice can be changed only there while a queued
task's can be set directly. Make scx_bpf_task_set_slice() apply the slice
under the rq lock. Synchronously when the caller already holds it, otherwise
by stashing it in the new p->scx.slice_oob, tagged with the scheduler's id
so a request that outlived a reassignment is dropped. Whether the caller
holds @p's current rq lock is tested with p->scx.runnable_cpu.
Revocation is enforced through the same grant. When a cpu's effective caps
lose SCX_CAP_BASE, the cap-revoke reenq scan also checks the running task
and zeroes its slice to evict it. The scan runs as a balance callback after
the pick, so this catches both the task that was running when the revoke
landed and a capless task the pick just promoted off the local DSQ. The
paths that keep a task on its cpu - holding on to the last runnable task in
balance, the ENQ_LAST reinsertion and the slice refill on pick - skip tasks
lacking baseline access. A migration-disabled task is exempt, mirroring its
capless admission on insert.
v4: Test rq ownership with p->scx.runnable_cpu, closing a remote-wakeup TOCTOU. (sashiko AI)
v3: Keep a pending out-of-band slice request across refill and preserve. (sashiko AI)
v2: Only write slice directly when @p is queued on the held rq. (sashiko AI)
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Add p->scx.runnable_cpu, the cpu @p is runnable on, or -1 when it is not.
It is stamped as @p joins the runnable_list (set_task_runnable()) and
cleared as it leaves (clr_task_runnable()), both under the rq lock.
task_cpu() can't answer "is @p on this rq" reliably: a remote wakeup changes
it under @p's pi_lock alone, without the source rq lock, so it can read as
the locked rq while @p is really elsewhere. runnable_cpu changes only under
the rq lock, so a caller holding an rq lock can compare against it to know
whether that is @p's current rq.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
A later change makes set_task_slice() also drop a pending out-of-band slice
request, so the BPF-triggered writes to p->scx.slice need to funnel through
one place. Introduce set_task_slice() and route those writes through it.
update_curr_scx() decrements curr->scx.slice directly for accounting and is
left alone. No functional change - the helper only assigns p->scx.slice.
v2: Reword the set_task_slice comment to "BPF-triggered writes". (Andrea)
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Neither a scx_sched pointer nor its cgroup id uniquely identifies a
scheduler instance. A freed sched's memory can be reallocated, and a cgroup
can detach one sched and attach another. Add a monotonic, never-reused u64
id. A later patch compares it to drop a slice request that outlived a change
of a task's owning scheduler.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Replace the __SCX_CAP_DUMMY placeholder with SCX_CAP_ENQ_IMMED, which gates
inserting IMMED tasks onto a cid's local DSQ. An IMMED enqueue is guaranteed
to either get its task running on the cpu at once or hand it back to the
scheduler, so IMMED work can never pile up on the cpu's queue and a cpu can
be shared across sub-scheds through IMMED access without any of them
swamping it.
That makes ENQ_IMMED the natural baseline, the minimal cap to make any use
of a cpu. SCX_CAP_BASE aliases it so gates on basic cpu access can state the
intention instead of naming ENQ_IMMED.
Enforcement covers inserts and queued tasks. An insert without the cap is
diverted to the reject DSQ, and queued tasks are reenqueued when the cap is
lost. scx_bpf_sub_dispatch() skips a child that lacks the cap on the cpu, as
its inserts would only be rejected. Vacating the running task on cap loss
lands in a later patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
A SAVE/RESTORE requeue re-inserts a running task in place and is immediately
followed by set_next_task_scx(). It is not a real scheduling event: the task
is already admitted to its cid and must return to the local DSQ
unconditionally.
scx_caps_for_enq() maps an enqueue to the cap its local-DSQ insert requires.
Add SCX_ENQ_IGNORE_CAPS, set it on the RESTORE-in-place branch of
enqueue_task_scx(), and have scx_caps_for_enq() require no caps for it, so
the cid admission gate never diverts an in-place restore to the reject DSQ.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
When a sub-scheduler dispatches a task to a CPU it lacks the required
capability on, the task must be rejected rather than allowed to run.
Add the machinery for that. Each rq gets a reject DSQ, a kernel-internal
holding queue that is never run and that the BPF scheduler cannot reach. An
insert that must be refused is diverted there instead of the local DSQ, and
a deferred requeue then hands the parked tasks back to the BPF scheduler to
re-decide. A cap revoke extends this to already-queued tasks. When the
revoke reaches the cpu's effective caps, the cpu scans its local DSQ and
reenqueues the tasks that no longer qualify.
A migration-disabled task must run on its cpu, so a capless one is admitted
anyway and counted in the new SCX_EV_SUB_FORCED_ADMIT event.
This is preparation for the actual sub-sched cap enforcement. The divert is
wired but inert here.
v2: Admit offline-rq and migration_pending inserts to local, not reject. (sashiko AI)
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
The local DSQ is synchronized by the containing rq lock rather than its own
dsq->lock. A later patch adds a second such DSQ. In preparation, factor the
"rq owns the lock" test into dsq_is_rq_owned() and rename
local_dsq_post_enq() to rq_owned_post_enq(), taking @rq explicitly.
No behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
A sub-scheduler that gains or loses effective caps on a cpu may want to act
on it right away - e.g. place or preempt on a newly usable cpu. The existing
ops.sub_caps_updated() doesn't fit as it is delivered asynchronously to
scheduling operations and can arrive before the per-cpu effective caps go
live.
Add ops.sub_ecaps_updated(cid, before, after), a cid-form callback fired
from scx_process_sync_ecaps() when a sub-sched's effective caps on a cid
change. It runs in dispatch context so the sched can insert, kick or preempt
on the cid directly. @before is the caps as of the last delivery.
Cpu hotplug rides the same machinery. Going down zeroes each sched's ecaps
on the cpu's cid, with queued syncs discarded at consumption while the cpu
is inactive. Coming back up queues a sync for every sched. reported_ecaps is
kept across the down/up cycle, so the resync fires the callback only if
ownership actually changed while the cpu was down.
v2: Compute cid below the active-cpu guard; discard queued syncs on !cpu_active(). (sashiko AI)
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Checking a sched's caps on a cid would need to test several cap bits against
caps[] to account for implied caps. Also, caps[] modifications aren't
synchronized against scheduling operations on each cpu, which can lead to
awkward race conditions.
Collect them per cpu instead. caps[] under pshard->lock stays the target
configuration. scx_sched_pcpu->ecaps is added, the transposed effective
copy: the set of cap bits the sched holds on that cpu which can be accessed
with a single read. It is stable under the rq lock. It can also be read
locklessly with READ_ONCE().
Grant and revoke only mutate caps[]. They queue a sync request on the target
cpu's rq->scx.ecaps_to_sync and kick it, and the cpu recomputes the queued
scheds' ecaps from caps[] in balance_one() under its own rq lock. A dying
sched runs the sync directly to retire its queued request before freeing. As
held references can defer the freeing past the enclosing root scheduler's
lifetime, root enable discards leftover sync requests before going live.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Wire up ops_cid.sub_caps_updated() to notify sub-scheds of cap changes.
Three constraints shape the design:
1. Static memory. Deliveries use a fixed-size buffer, both for runtime
efficiency and so notifications can't be lost under memory pressure.
2. High-frequency updates. Grant/revoke can mutate caps in bursts, and the
notifier path must absorb that without amplifying it.
3. Recursive grant/revoke from the callback. A child receiving a
notification can call grant/revoke on its own children, which can
cascade recursively down its subtree.
(1) and (2) lead to coalescing into a fixed payload. Each delivery carries a
single (cmask, caps) pair covering every change since the previous one.
Direction (set vs cleared) isn't encoded as it doesn't fit in the fixed-size
summary. The callback queries scx_bpf_sub_caps() for current state. Only one
delivery is in flight per shard. Further changes fold into the same buffer
and ship as the next callback, so a shard's callbacks fire in order.
(3) leads to deferred delivery. Events accumulate during grant/revoke and
are delivered after the shard lock is released.
v2:
- Request a private stack for ops.sub_caps_updated(). (sashiko AI)
- Build cmask_arena_out via scx_cmask_ref, not by re-reading its header.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Caps are per-cid permissions parents delegate to direct children via
scx_bpf_sub_grant() / scx_bpf_sub_revoke(). A child's cap set is always a
subset of its parent's. Sub-scheds check their caps locally, and cross-sched
communication is needed only when the delegation set itself changes.
Caps will be used to implement sub-sched scheduling on the enqueue path.
Picking a cid for a task at a leaf depends on which cids the leaf is allowed
to use, and resolving that programmatically on every enqueue would mean a
cross-sched round-trip call chain, possibly retrying if the request can't be
granted as-is. The dispatch path is different - it runs as top-down
recursion via scx_bpf_sub_dispatch().
Locking is per shard. cid space is split into shards, and each sub-sched has
its own pshard->lock for each shard. Operations are broken up on shard
boundaries. Different shards never contend. Shards are expected to be
topology-aligned and likely to serve as the locality unit when cids are
allocated to schedulers, so per-shard lock granularity scales naturally with
the allocation pattern.
This patch adds the framework with a single dummy cap. Real caps land in
later patches.
The enable path is reordered for pshards. scx_arena_pool_init() moves ahead
of scx_link_sched() so the pshards are allocated before the sched becomes
reachable - scx_alloc_pshards() skips allocation when the arena pool isn't
initialized.
- scx_bpf_sub_grant(): Per-cid all-or-nothing grant to direct child.
- scx_bpf_sub_revoke(): Clear caps on @cmask across @child and its subtree.
- scx_bpf_sub_caps(): Lockless snapshot of caps on a cid range.
/sys/kernel/sched_ext/SCHED/caps shows the caps each scheduler currently
holds.
v4: Move the pshard[] full build/publish and the err_disable scx_error() recording to earlier patches. (sashiko AI)
v3: Build pshard[] fully before publishing it, read it with READ_ONCE. (sashiko AI)
v2: Validate ops before scx_link_sched() publishes the sub. (sashiko AI)
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
A scheduler's BPF programs can outlive it. A timer it armed or a tracing
program it loaded can fire after ops.exit() has run, before the programs are
unloaded, and scx_prog_sched() still resolves the program to its scheduler
through ops->priv. Harmless while kfuncs touch only lifetime-stable state,
but a hazard once a kfunc reads global state a newly loaded scheduler can
change underneath it.
Add scx_sched->dead, set right after ops.exit() and drained with
synchronize_rcu(). It follows exit() rather than preceding it so exit()'s own
kfunc calls still resolve to @sch. scx_prog_sched() returns NULL for a dead
scheduler, so every kfunc's existing !sch bail rejects it at one choke
point.
v2: Check dead in the CONFIG_EXT_SUB_SCHED=n scx_prog_sched() too. (sashiko AI)
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Factor the sibling/ancestor portion of scx_next_descendant_pre() out as
scx_skip_subtree_pre(), a pre-order walk primitive that skips @pos's
subtree, and call it from scx_next_descendant_pre(). Same locking rules as
the existing primitive.
Used in a follow-up to fast-skip subtrees that have nothing to do during a
descendant walk.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Future kfuncs need to walk descendants without scx_sched_lock. Make the
walker RCU-safe so that they can. A sub-sched's fields are initialized
before it is linked, so a walk that observes a linked node also observes its
setup. In-place changes after linking carry their own ordering.
Switch the children/sibling list ops to RCU and expand the descendant walker
to accept rcu_read_lock as a valid read-side context. Walkers that mutate
keep scx_sched_lock.
A sub-sched can be linked while an ancestor is bypassing, after the bypass
walk that propagates the depth has passed its parent. Bypass state is a
per-cpu flag plus a depth count and can't be established atomically at link
time, so refuse to link under a bypassing ancestor. Take scx_bypass_lock
across linking to check the parent's bypass state coherently.
v3: Reject linking under a bypassing ancestor instead of inheriting bypass_depth. (sashiko AI)
v2: Inherit bypass_depth before publishing @sch on the RCU sibling list.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
scx_call_op_set_cpumask() builds a per-cpu cmask in the set_cmask scratch,
which lives in BPF-writable arena. A scheduler can corrupt the scratch's
inline header (base, nr_cids, alloc_words) from another cpu, so sizing and
indexing the write from it risks an out-of-bounds write.
Drive the build from kernel-known geometry instead.
scx_cmask_ref_init_kern() imposes base and nr_cids rather than reading them,
and scx_cmask_ref_from_cpumask() fills the scratch from the ref. Neither
reads the header back.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
kfuncs taking struct scx_cmask * from BPF arena memory have two problems.
The pointer can be any value the BPF prog hands in, and the header (@base,
@nr_cids, @alloc_words) can be mutated by the prog concurrently with kernel
access.
Add scx_cmask_ref, a validated handle. _init() normalizes the input pointer
into the arena's kern_vm range via scx_arena_to_kaddr() and snapshots the
header, rejecting a range outside the machine or a nr_cids whose words
exceed the declared @alloc_words. Downstream sizing uses the snapshot, not
the live header. _shard() reads slices while _or() and _copy() write back,
all bounded by the snapshot. No callers yet.
struct scx_cmask's bits[] carried __counted_by(alloc_words), so
UBSAN_BOUNDS and FORTIFY_SOURCE bound accesses to the array. That bound is
read from @alloc_words at the access. For an arena cmask @alloc_words is
BPF-writable. A prog that sets it larger than the real allocation makes the
check pass on a genuine overrun, so the annotation catches nothing, and it
only runs under those debug configs. Drop it - _init() validates
@alloc_words explicitly, and kernel-owned cmasks set it themselves.
v2: Validate @alloc_words in _init(), drop __counted_by. (Andrea, sashiko AI)
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Add struct scx_pshard and sch->pshard[] indexed by shard_idx, each entry
allocated on its shard's NUMA node from scx_shard_node[si]. The struct
starts empty (one dummy field). Follow-up patches will grow it as
shard-local state lands. Only cid-type schedulers with an arena pool get
pshards.
Allocation happens after ops.init_cids() returns so any
scx_bpf_cid_override() it issues has finalized scx_nr_cid_shards and
scx_shard_node[]. sch->nr_pshards records the array size for the async RCU
free path, which may run after a later scheduler's scx_cid_init() has
rewritten the global.
v3: Build and publish pshard[] fully-formed here rather than a later patch.
v2: Free the partially-allocated pshard array on alloc failure. (sashiko AI)
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Split kobject_init_and_add() in scx_alloc_and_add_sched(): only
kobject_init() runs there. A new scx_sched_sysfs_add() helper does
kobject_add() (and creates sub_kset when the scheduler implements
ops.sub_attach), called by both enable workfns once @sch is linked and its
sysfs-visible state is initialized. Prep so a future caps attribute can rely
on @sch being fully built by the time it's sysfs-visible. Add early enough
that a stall later in enable still leaves sysfs inspectable.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
An overridden cid mapping invalidates the auto-generated shard layout, so
the override call has to provide both. Extend scx_bpf_cid_override() with a
shard_start[] array that lists the first cid of each shard (starting at 0,
strictly increasing, last shard implicitly extends to num_possible_cpus()).
A scheduler that wants only custom shards with the auto-generated cid
mapping can read the current mapping and pass it back unchanged.
Overridden shards can span NUMA nodes, so scx_shard_node[] is rebuilt by
majority count: each shard is assigned to the node that owns the most cpus
in it.
v2: Snapshot the caller's cpu_to_cid/shard_start arrays before validating. (sashiko AI)
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Sub-sched operations need a scalable locking / work domain smaller than the
whole cid space. Carve the cid space into topology-respecting shards: each
shard is a contiguous cid range that stays within one LLC, and LLCs larger
than the per-shard cap (default 24 cids, configurable via
ops.cid_shard_size) split into enough shards to fit. A hard cap of
SCX_CID_SHARD_MAX_CPUS prevents pathological sizes under custom
configurations.
No-topo cids pack into their own shards so every cid has a shard assignment.
Also build scx_cid_shard_ranges[] for O(1) shard-to-cid-range lookup and
scx_shard_node[] so callers can size or place work by NUMA without walking
cids. Auto-built shards inherit their LLC's node. No-topo shards carry
NUMA_NO_NODE.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
A cid-form scheduler that calls scx_bpf_cid_override() to install a custom
cid layout can only do so from ops.init(). Enable-path setup that depends on
the cid layout thus has to run after ops.init(), and ops.init() itself can't
use anything derived from the final layout, which turned out to be too
restrictive.
Add an ops.init_cids() callback dedicated to finalizing the cid layout. It
runs before the rest of the enable-path setup, so the final layout is in
effect for everything that follows including ops.init(), which now runs
after the arena pool and cmask scratch allocations.
scx_bpf_cid_override() is restricted to ops.init_cids() at load time. It
sits in a kfunc set gated by SCX_KF_ALLOW_INIT_CIDS, a flag set only on the
init_cids op, so the verifier rejects a call from any other context. The
runtime root-only check is dropped as ops.init_cids() only runs during root
enable.
The qmap demo moves its override into a dedicated qmap_init_cids() and,
while at it, introduces an enum for the cid override modes instead of
hard-coded integers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
The kick machinery kept its targets in rq->scx shared by every sched on the
cpu. A preempt kick carried no record of which scheduler requested it.
A later patch needs preempt kicks scoped to the requesting scheduler so a
sub-scheduler can preempt only tasks in its own subtree. Move the kick masks
into the per-sched per-cpu scx_sched_pcpu and have scx_kick_cpu() link the
sched onto a per-cpu list (rq->scx.sched_pcpus_to_kick). The cpu's single
kick irq_work walks that list and kicks each sched's targets on its behalf,
so a kick stays attributed to its scheduler.
The SCX_KICK_WAIT sync set (cpus_to_sync, the kick_sync snapshot and the
balance-callback trigger) stays in rq->scx: the waiter is the cpu, not the
scheduler, and its only writers, the kick irq_work and the wait balance
callback, are cpu-local.
On disable, free_kick_syncs() flushes each cpu's pending kick irq_work
before clearing @ksyncs, so a late kick unlinks its to_kick_node instead of
early-returning on a NULL @ksyncs and leaving the node linked at free.
v3: Flush the kick irq_work in free_kick_syncs() before clearing @ksyncs. (sashiko AI)
v2: Warn once per sched on scx_bpf_kick_cpu() from NMI.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
A per-task op must be dispatched on the scheduler that owns the task.
SCX_CALL_OP_TASK() and its _RET twin take @sch explicitly, and a caller that
passes the wrong scheduler would silently run the op on it. Add a
WARN_ON_ONCE() that @sch matches the task's owner so such a mismatch is
caught rather than hidden.
Two sites legitimately target a scheduler other than the task's owner:
cgroup_move() runs on the root sched, and scx_sub_init_cancel_task() fires
exit_task() on a task not yet associated with @sch. Both switch to the inner
__SCX_CALL_OP_TASK(), which dispatches on the explicit @sch without the
assert.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
When switching a task's sched_class away from sched_ext, we get the
following sequence of events in __sched_setscheduler():
sched_change_begin()
switched_from_scx()
scx_disable_task(p)
ops.disable(p)
__setscheduler_params()
set_load_weight()
reweight_task_scx(p)
ops.set_weight(p)
p->sched_class = next_class;
sched_change_end()
...
Notably, ops.set_weight() is called _after_ ops.disable().
This violates the expected semantics of the callbacks, the expectation
being that ops.disable() can only be followed by ops.exit_task() or
ops.enable().
Skipping the weight adjustment for disabled tasks should be harmless
since the weight will be recalculated in scx_enable_task() if the task
ever rejoins SCX.
Fixes: 637b068282 ("sched: Fold sched_class::switch{ing,ed}_{to,from}() into the change pattern")
Cc: stable@vger.kernel.org # v6.19+
Signed-off-by: Kuba Piecuch <jpiecuch@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
