Add the constants associated with RS-FEC configuration
and status as well as the indicated separated bits for
DEVS1 to convey a separated PMA.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260430150802.3521-2-mike.marciniszyn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In wm_adsp_fw_find_test_find_firmware_byindex() the content of
priv->searched_fw_files must be cleared before starting the next iteration.
The files searched for are appended to priv->searched_fw_files, so if it is
not cleared on each iteration it will still contain the searches from the
previous iteration.
Fixes: bf2d44d07d ("ASoC: wm_adsp: Add kunit test for firmware file search")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260505105123.3539778-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Redirect wm_adsp_release_firmware_files() to a replacement function that
handles the dummy firmware created by the tests. Use the same cleanup
function to cleanup in the test exit() function. Also call it on each
loop in wm_adsp_fw_find_test_find_firmware_byindex() to free the created
strings before reusing priv->found_fw on the next loop.
wm_adsp_release_firmware_files() will pass the struct firmware* pointers
to release_firmware(). But the pointers created by the tests are dummies
and must not be passed to release_firmware().
The test never invokes wm_adsp_release_firmware_files() so it wasn't
redirected. But the error handling in wm_adsp_request_firmware_files()
calls wm_adsp_release_firmware_files(). The redirected function makes
this safe.
Using the same cleanup function to perform cleanup from the test exit()
handler and wm_adsp_fw_find_test_find_firmware_byindex() avoids the risk
of duplicate cleanup code that all needs updating if there is any change
to the cleanup requirements.
This problem was found by https://sashiko.dev.
Fixes: bf2d44d07d ("ASoC: wm_adsp: Add kunit test for firmware file search")
Closes: https://sashiko.dev/#/patchset/20260326100853.1582886-1-rf%40opensource.cirrus.com
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260505105123.3539778-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently there is no way to install an LTF key seed that can be
used in non-trigger-based (NTB) and trigger-based (TB) FTM ranging
to protect NDP frames. Without this, drivers cannot enable PHY-layer
security for peer measurement sessions, leaving ranging measurements
vulnerable to eavesdropping and manipulation.
Introduce NL80211_KEY_LTF_SEED attribute and the dedicated extended
feature flag NL80211_EXT_FEATURE_SET_KEY_LTF_SEED to allow drivers
to advertise and install LTF key seeds via nl80211. The key seed
must be configured beforehand to ensure the peer measurement session
is secure. The driver must advertise both NL80211_EXT_FEATURE_SECURE_LTF
and NL80211_EXT_FEATURE_SET_KEY_LTF_SEED for the key seed installation
to be permitted.
The LTF key seed is pairwise key material and must only be used with
pairwise key type. Reject attempts to use it with other key types.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-13-peddolla.reddy@oss.qualcomm.com
[fix policy coding style]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Proximity detection often does not require detailed ranging
measurements, yet userspace currently receives full FTM results for
every request, causing unnecessary data transfer, host wakeups, and
processing overhead.
Add an optional control to suppress ranging result reporting for
peer-to-peer PD requests. Introduce the
NL80211_PMSR_FTM_REQ_ATTR_PD_SUPPRESS_RESULTS flag; when set with a
PD request, the device may perform the measurements (e.g. when acting
as RSTA) but must not report the measurement results to userspace.
Validate that the flag is only accepted when request_type is set to
NL80211_PMSR_FTM_REQ_TYPE_PD, reject otherwise.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-12-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Devices may support different preamble and bandwidth configurations
for proximity detection (PD) ranging versus standard ranging. Add
separate pd_preambles and pd_bandwidths fields to
cfg80211_pmsr_capabilities to allow drivers to advertise PD-specific
capabilities.
Expose these over nl80211 using new attributes
NL80211_PMSR_FTM_CAPA_ATTR_PD_PREAMBLES and
NL80211_PMSR_FTM_CAPA_ATTR_PD_BANDWIDTHS, advertised only when
pd_support is set.
For PD requests, validate bandwidth and preamble against pd_bandwidths
and pd_preambles. For non-PD requests, validate against the existing
bandwidths and preambles fields.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-11-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Proximity detection applications need to receive measurement results
only when devices cross specific distance boundaries to avoid
unnecessary host wakeups and reduce power consumption.
Introduce configurable distance-based reporting thresholds that
drivers can use to implement selective result reporting. Add ingress
and egress distance parameters allowing applications to specify when
results should be reported as peers cross these boundaries.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-10-peddolla.reddy@oss.qualcomm.com
[remove mm units from variables]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Peer measurement capabilities currently advertise a single maximum
peer count regardless of device role. Some devices support different
peer limits when operating as initiator versus responder.
Add max_peers fields inside the ftm.ista and ftm.rsta sub-structs of
cfg80211_pmsr_capabilities to allow drivers to advertise per-role peer
limits. These limits are generic and not restricted to any specific
ranging type.
Expose these over nl80211 using new NL80211_PMSR_ATTR_MAX_PEER_ISTA_ROLE
and NL80211_PMSR_ATTR_MAX_PEER_RSTA_ROLE attributes inside the
ISTA_CAPS and RSTA_CAPS nested attributes respectively.
When a role limit is advertised, validate the number of peers in the
request separately for each role using the existing rsta flag in the
FTM request, and reject the request if the limit is exceeded.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-9-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Applications need negotiated session parameters to interpret
proximity ranging results and perform post-processing. Currently,
the FTM response lacks LTF repetition counts, time constraints,
spatial stream configuration, and availability window parameters.
Extend the FTM response structure to report these negotiated
parameters, enabling applications to track session configuration
and use them in post-processing to increase ranging precision.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-8-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Enable NTB continuous ranging with configurable timing and measurement
parameters as per the Wi-Fi Alliance specification "Proximity Ranging
(PR) Implementation Consideration Draft 1.9 Rev 1, section 5.3". Add
new FTM request attributes for min/max time between measurements,
nominal time (mandatory for NTB), AW duration, and total measurement
count.
Add NL80211_PMSR_PEER_ATTR_REQ_TYPE attribute using the new
nl80211_peer_measurement_ftm_req_type enum to allow userspace to
specify the ranging request type per peer:
- NL80211_PMSR_FTM_REQ_TYPE_INFRA: STA-to-AP or AP-to-STA ranging
(default if attribute is absent)
- NL80211_PMSR_FTM_REQ_TYPE_PD: peer-to-peer ranging
Validate the request type against the device TYPE_CAPS capabilities
advertised via NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS. Reject PD
requests if the device does not advertise PD support.
Reject PD requests that set trigger-based ranging, as TB ranging is
not compatible with peer-to-peer proximity detection.
Add ftms_per_burst limit of 4 for PD NTB ranging requests.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-7-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce Proximity Detection (PD) capabilities in Peer Measurement
Service (PMSR) as defined in the Wi-Fi Alliance specification
"Proximity Ranging (PR) Implementation Consideration Draft 1.9 Rev 1
section 3.3". This enables devices to advertise peer to peer ranging
support.
Restructure FTM capabilities in cfg80211_pmsr_capabilities to replace
the single support_rsta flag with nested ista and rsta sub-structs,
each carrying per-mode flags for Non-Trigger Based (NTB), Trigger Based
(TB), and EDCA based ranging. This allows drivers to advertise detailed
role and protocol support for both initiator and responder roles.
Add support to pass additional ISTA and RSTA role capabilities to
userspace using new nested ISTA_CAPS and RSTA_CAPS attributes. The
legacy RSTA_SUPPORT flag is retained for backward compatibility.
Add NL80211_PMSR_FTM_CAPA_ATTR_TYPE_CAPS nested attribute using the
nl80211_peer_measurement_ftm_type_capa enum with two sub-flags:
NL80211_PMSR_FTM_TYPE_CAPA_ATTR_INFRA_SUPPORT for STA-to-AP or
AP-to-STA ranging, and NL80211_PMSR_FTM_TYPE_CAPA_ATTR_PD_SUPPORT
for peer-to-peer ranging.
Add CONCURRENT_ISTA_RSTA_SUPPORT as a FTM capability flag indicating
the device can simultaneously act as initiator and responder in a
multi-peer measurement request.
Extend FTM capabilities with antenna configuration fields
(max_no_of_tx_antennas, max_no_of_rx_antennas) for the PR Element
during PASN negotiation, and ranging interval limits
(min_allowed_ranging_interval_edca, min_allowed_ranging_interval_ntb)
to advertise device timing constraints for EDCA and NTB-based ranging.
Update the FTM request validation path in pmsr.c to check RSTA
requests against the per-mode rsta capabilities (NTB, TB, EDCA),
rejecting requests for modes the device does not support.
Co-developed-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-6-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the proximity detection (PD) interface type has no
start/stop commands defined, preventing user space from
controlling PD operations through the nl80211 interface.
Add NL80211_CMD_START_PD and NL80211_CMD_STOP_PD commands to
allow user space to start and stop a PD interface. Add the
corresponding start_pd and stop_pd operations to cfg80211_ops
and ieee80211_ops, along with nl80211 command handlers, rdev
wrappers, and tracing support. Validate that drivers advertising
PD interface support implement the required operations. Handle
PD interface teardown during device unregistration and when
the interface leaves the network.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-5-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a new wdev-only interface type NL80211_IFTYPE_PD to support
Proximity Detection (PD) operations such as PASN and peer measurement
operations. This interface type operates without a netdev, similar to
P2P_DEVICE and NAN interfaces.
Implement support across cfg80211 and mac80211 layers with PD-specific
checks gated by the NL80211_EXT_FEATURE_SECURE_RTT feature flag,
management frame registration and transmission capabilities, and proper
channel context handling where PD interfaces are excluded from bandwidth
calculations. Update mac80211 to recognize the new interface type in the
relevant paths for this management-only interface.
PD discovery can be performed on any available interface, such as
NL80211_IFTYPE_STATION.
If PD/PMSR uses the MAC address of an existing interface type, such as
NL80211_IFTYPE_STATION, then pairing and measurement shall use that
same interface. If PD/PMSR uses a different MAC address, such as a
random MAC address, then pairing and measurement can be performed on a
new NL80211_IFTYPE_PD interface created with that random MAC address.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-4-peddolla.reddy@oss.qualcomm.com
[fix comment style]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently the remain_on_channel operation does not support
filtering incoming frames by destination MAC address. This
prevents use cases such as PASN authentication in the
responder side that need to receive frames addressed to a
specific MAC during the off-channel period.
Add an rx_addr parameter to the remain_on_channel operation
callback and propagate it through the call chain from nl80211
to driver implementations. Introduce the extended feature
NL80211_EXT_FEATURE_ROC_ADDR_FILTER as a capability gate so
that cfg80211 rejects the request if the driver does not
advertise support for address filtering. Extract the address
from the NL80211_ATTR_MAC attribute when provided in the
netlink message and update the tracing infrastructure to
include the address in remain_on_channel trace events. The
rx_addr parameter is optional and can be NULL, maintaining
backward compatibility with existing drivers.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-3-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The lmr_feedback field is only applicable to TB and non-TB ranging.
Currently, pmsr_parse_ftm() enforces lmr_feedback for all RSTA
requests, incorrectly rejecting valid EDCA-based RSTA requests.
Fix this by limiting the lmr_feedback requirement to TB and non-TB
ranging only.
Fixes: 853800c746 ("wifi: nl80211/cfg80211: support operating as RSTA in PMSR FTM request")
Co-developed-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-2-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Dipayaan Roy says:
====================
net: mana: Fix mana_destroy_rxq() cleanup for partial RXQ init
When mana_create_rxq() fails partway through initialization (e.g. the
hardware rejects the WQ object creation), the error path calls
mana_destroy_rxq() to tear down a partially-initialized RXQ.
This exposed multiple issues in mana_destroy_rxq() path, as it assumed
the RXQ was always fully initialized, leading to multiple issues:
1. xdp_rxq_info_unreg() was called on an unregistered xdp_rxq,
triggering a WARN_ON ("Driver BUG") in net/core/xdp.c.
2. mana_destroy_wq_obj() was called with INVALID_MANA_HANDLE,
sending a bogus destroy command to the hardware.
3. mana_deinit_cq() was called twice — once inside mana_destroy_rxq()
and again in mana_create_rxq()'s error path — causing a
use-after-free since mana_destroy_rxq() frees the rxq first.
This was observed during ethtool ring parameter changes when the
hardware returned an error creating the RXQ. This series makes
mana_destroy_rxq() safe to call at any stage of RXQ initialization
by guarding each teardown step, and removes the redundant cleanup
in mana_create_rxq().
====================
Link: https://patch.msgid.link/20260430035935.1859220-1-dipayanroy@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In mana_create_rxq(), the error cleanup path calls mana_destroy_rxq()
followed by mana_deinit_cq(). This is incorrect for two reasons:
1. mana_destroy_rxq() already calls mana_deinit_cq() internally,
so the CQ's GDMA queue is destroyed twice.
2. mana_destroy_rxq() frees the rxq via kfree(rxq) before returning.
The subsequent mana_deinit_cq(apc, cq) then operates on freed memory
since cq points to &rxq->rx_cq, which is embedded in the
already-freed rxq structure — a use-after-free.
Remove the redundant mana_deinit_cq() call from the error path since
mana_destroy_rxq() already handles CQ cleanup. mana_deinit_cq() is
itself safe for an uninitialized CQ as it checks for a NULL gdma_cq
before proceeding.
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Aditya Garg <gargaditya@linux.microsoft.com>
Link: https://patch.msgid.link/20260430035935.1859220-4-dipayanroy@linux.microsoft.com
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In mana_destroy_rxq(), mana_destroy_wq_obj() is called unconditionally
even when the WQ object was never created (rxobj is still
INVALID_MANA_HANDLE). When mana_create_rxq() fails before
mana_create_wq_obj() succeeds, the error path calls mana_destroy_rxq()
which sends a bogus destroy command to the hardware:
mana 7870:00:00.0: HWC: Failed hw_channel req: 0x1d
mana 7870:00:00.0: Failed to send mana message: -71, 0x1d
mana 7870:00:00.0 eth7: Failed to destroy WQ object: -71
Guard mana_destroy_wq_obj() with an INVALID_MANA_HANDLE check so that
mana_destroy_rxq() is safe to call at any stage of RXQ initialization.
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Link: https://patch.msgid.link/20260430035935.1859220-3-dipayanroy@linux.microsoft.com
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Simply immediately TX all available packets on the corresponding queue.
This removes the HWSIM_TM_CMD_STOP_QUEUES/HWSIM_TM_CMD_RESUME_QUEUES
feature for now. It should be reasonably simple to add it back if it is
needed.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.c590948c1e45.Id3e629770663c44de00faa3ff9bac9c6b87459c6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Refactor the NAN timer to more closely track the where in the NAN
schedule the device currently is. Do this by having an hrtimer that
fires at the start of every slot.
For now continue to update the current channel at the start of the DW.
In the future, the correct channel according to the schedule should be
used everywhere.
This is in preparation to more accurately simulate more of the NAN
logic.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.feb8e02b234e.I46da3cabea8624ba2e6c91bd2afecd2dc6553c5a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It is easy to calculate the next target beacon transmission time (TBTT)
based on the current TSF and the beacon interval. Use this method to
calculate the time to the next beacon.
With this, the bcn_delta variable can be removed and drift over time due
to the timer firing late is fully avoided.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.cc6f099ae2ac.Iccf6164f3feeb5350fcfe0df666248c686b226ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
By delegating writing the timestamp into beacons and probe responses, we
can remove the abs_bcn_ts from the global data and still avoid any time
offset issues. This also seems conceptually closer to "real" hardware
where the timestamp will be written late in the TX path.
Move sending the SKB to the monitor interface to happen later, so that
the frame timestamp has the value filled in by mac80211_hwsim.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.ad4d77d85e0d.I86810bbbf9b171acc6dbf07f9904ce1686b5167a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The mac80211_hwsim base time for the simulation of the TSF was based on
the real time of the system. This clock is subject to unexpected
changes. Switch it to use boottime which is always monotonic and also
continues to run through times where the system is suspended.
Also change the function name from tsf_raw to sim_tsf to better
differentiate between the TSF of the mac and the TSF base of the
simulation.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.2a64333111ff.I2ef047f3cdd6dc52af4bb7bf747368fb78014f18@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Having everything in one file for mac80211_hwsim is starting to get a
lot and it will be even worse if we implement more parts of NAN. Split
the NAN implementation into separate files to improve the code
structuring.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.541371b35f02.I9484d746286eb2ab71ac987dfb907497d213c2bb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A NAN channel can be evacuated, i.e. detached from its chanctx, if all
chanctxs are used by NAN and a chanctx is needed for something else.
For example if the STA interface needs to perform a channel switch.
Implement the evacuation: detach the NAN channel from its chanctx, remove
all the peer NAN channels that were using this chanctx, and update the
driver.
Internally, the NAN channel evacuation will be triggered in the scenario
described above, and API is provided for the driver to also trigger it.
The driver/device is assumed to publish a ULW to notify the peers about
the fact that we won't be present on this NAN channel anymore.
Also export this as an API for the drivers: if a driver has other
resources per channel, it might want to trigger channel evacuation in
order to free up such internal resources for other usages.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.1e1dc40d2f3e.I003fe84dc6373bb9ad55abd7824b9fc21c51203f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In NAN, we don't know on what band the frame will be sent. Therefore we
set info->band to NUM_NL80211_BANDS. However, this leads to out-of-bound
access in ieee80211_add_tx_radiotap_header when we try to access the
sbands array.
Fix it by not accessing the array if the band is NUM_NL80211_BANDS.
This means that we will not report rate info for legacy rate in NAN.
But nobody really cares about it.
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.346c9893d136.I15919027597c04ec35c6217db6e52e2a605e5cfc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
skb->dev may be NULL for frames on non-netdev devices. For example, NAN
device frames after pairing. Fix it.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504072055.1292999-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Allow setting the interface MAC address for NAN Device interfaces
and P2P Device interfaces on interface creation.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.d268b245037b.I351e16270c34ee734fed98da25db848211ab7cc2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some frames sent to the NAN device may be protected, such as
protected action frames (in particular protected dual of
public action).
Accept robust management frames except disassoc on the NAN
device, and clean up the code a little bit.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.1900c926c2e8.Ia25b2e82b250058fefa179c39327d9c8b3c3cd62@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Allow TX/RX of action frames (for NAN action frames) over
NAN Data interfaces to support cases where there's a secure
NDP and NAFs may be exchanged over that.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.4ac207c60ebb.Ic4b1c90552497b7ff2616651a408e5fe8bde7b99@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, we store in nan.conf the cluster id that was configured from
upper layer to be used when the device opens a cluster.
But after we joined a cluster, the configured cluster id is no longer
relevant. Particularly, in reconfig we will give the driver the
(possibly) wrong cluster id.
Add an API to be called by the driver when joined a cluster
in which the cluster id will be updated.
Use the locally stored cluster id instead of cfg80211's copy.
Ignore cluster id updates from cfg80211 if we already have one
configured.
Adjust the drivers that use the cfg80211 API
(cfg80211_nan_cluster_joined) directly, otherwise we break functionality
(i.e. accept frame check won't evaluate to true).
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504101829.5dada1b756a4.I0f1060215267fd8aef31afd99f8f42e6fde7f234@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Populate the assoc_encrypted field in cfg80211_rx_assoc_resp_data
for mac80211-based drivers to indicate that the entire (re)association
exchange was encrypted.
When epp_peer is set, mac80211 enforces that unprotected
(Re)Association Request/Response frames are dropped. This ensures that
by the time the (Re)Association Response is processed, the entire
exchange was transmitted encrypted over the air.
Add support to populate assoc_encrypted based on epp_peer flag.
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260504123624.529218-3-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In SME-in-driver mode, the driver handles the entire (re)association
exchange. Userspace (e.g., wpa_supplicant) currently has no explicit
indication of whether the (re)association exchange was encrypted,
making it difficult to distinguish EPP (Enhanced Privacy Protection,
IEEE 802.11bi) associations from non-EPP associations.
When (Re)Association frame encryption is used, the (Re)Association
Response frame must contain a Key Delivery element as specified in
IEEE P802.11bi/D4.0, Table 9-65. Userspace must process this element
only when the (Re)Association Response frame is actually encrypted.
Processing it unconditionally for unencrypted frames leads to incorrect
behavior. Without an explicit indication from the driver, userspace
cannot determine whether encryption was used and whether the Key
Delivery element is valid.
Add a new flag attribute NL80211_ATTR_ASSOC_ENCRYPTED and a
corresponding field "assoc_encrypted" in cfg80211_connect_resp_params
to indicate that both the (Re)Association Request and Response frames
are transmitted encrypted over the air.
For mac80211-based drivers, extend cfg80211_rx_assoc_resp_data with
the assoc_encrypted field as well, which is then propagated to
cfg80211_connect_resp_params.
Pass the flag to userspace via NL80211_CMD_CONNECT event.
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260504123624.529218-2-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The max_channel_switch_time field in struct wiphy_nan_capa was documented
as being in milliseconds, but it is actually in microseconds as defined
in the Wi-Fi Aware specification and as indicated in the nl80211
NL80211_NAN_CAPA_MAX_CHANNEL_SWITCH_TIME attribute.
Fix the documentation to say microseconds.
Signed-off-by: Israel Kozitz <israel.kozitz@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260504121734.d0a0152f7d8c.I47e5c91f7ead4f8006fb13f9194d95a55cf9c398@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, when the firmware is not fully loaded and if_usb_disconnect
is called, if_usb_prog_firmware gets stuck waiting for
cardp->surprise_removed or cardp->fwdnldover while lbs_remove_card
also waits for the firmware loading to be completed, which never happens.
This caused the reported syzbot bug. To address this, the wake_up
function call can be added in the if_usb_disconnect function which notifies
the if_usb_prog_firmware thread and resolves the firmware loading.
Fixes: 954ee164f4 ("[PATCH] libertas: reorganize and simplify init sequence")
Reported-and-tested-by: syzbot+c99d17aa44dbdba16ad2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c99d17aa44dbdba16ad2
Signed-off-by: Jakov Novak <jakovnovak30@gmail.com>
Link: https://patch.msgid.link/20260504162356.17250-2-jakovnovak30@gmail.com
[fix subject]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The kernel's softirq API does not permit re-enabling softirqs while IRQs
are disabled. The reason for this is that local_bh_enable() will not
only re-enable delivery of softirqs over the back of IRQs, it will also
handle any pending softirqs immediately, regardless of whether IRQs are
enabled at that point.
For this reason, commit
d021985504 ("x86/fpu: Improve crypto performance by making kernel-mode FPU reliably usable in softirqs")
disables softirqs only when IRQs are enabled, as it is not permitted
otherwise, but also unnecessary, given that asynchronous softirq
delivery never happens to begin with while IRQs are disabled.
However, this does mean that entering a kernel mode FPU section with
IRQs enabled and leaving it with IRQs disabled leads to problems, as
identified by Sashiko [0]: the EFI page fault handler is called from
page_fault_oops() with IRQs disabled, and thus ends the kernel mode FPU
section with IRQs disabled as well, regardless of whether IRQs were
enabled when it was started. This may result in schedule() being called
with a non-zero preempt_count, causing a BUG().
So take care to re-enable IRQs when handling any EFI page faults if they
were taken with IRQs enabled.
[0] https://sashiko.dev/#/patchset/20260430074107.27051-1-ivan.hu%40canonical.com
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Ivan Hu <ivan.hu@canonical.com>
Cc: x86@kernel.org
Cc: <stable@vger.kernel.org>
Fixes: d021985504 ("x86/fpu: Improve crypto performance by making kernel-mode FPU reliably usable in softirqs")
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
MSG_SPLICE_PAGES can attach pages from a pipe directly to an skb. TCP
marks such skbs with SKBFL_SHARED_FRAG after skb_splice_from_iter(),
so later paths that may modify packet data can first make a private
copy. The IPv4/IPv6 datagram append paths did not set this flag when
splicing pages into UDP skbs.
That leaves an ESP-in-UDP packet made from shared pipe pages looking
like an ordinary uncloned nonlinear skb. ESP input then takes the no-COW
fast path for uncloned skbs without a frag_list and decrypts in place
over data that is not owned privately by the skb.
Mark IPv4/IPv6 datagram splice frags with SKBFL_SHARED_FRAG, matching
TCP. Also make ESP input fall back to skb_cow_data() when the flag is
present, so ESP does not decrypt externally backed frags in place.
Private nonlinear skb frags still use the existing fast path.
This intentionally does not change ESP output. In esp_output_head(),
the path that appends the ESP trailer to existing skb tailroom without
calling skb_cow_data() is not reachable for nonlinear skbs:
skb_tailroom() returns zero when skb->data_len is nonzero, while ESP
tailen is positive. Thus ESP output will either use the separate
destination-frag path or fall back to skb_cow_data().
Fixes: cac2661c53 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a ("esp6: Avoid skb_cow_data whenever possible")
Fixes: 7da0dde684 ("ip, udp: Support MSG_SPLICE_PAGES")
Fixes: 6d8192bd69 ("ip6, udp6: Support MSG_SPLICE_PAGES")
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Reported-by: Kuan-Ting Chen <h3xrabbit@gmail.com>
Tested-by: Hyunwoo Kim <imv4bel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kuan-Ting Chen <h3xrabbit@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
"tc qdisc show ... handle xxx" filtering can be done by the kernel.
A followup patch can do the same for tcm_parent.
iproute2/tc needs a small companion patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260503114515.2460477-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add airoha_fe_get() and airoha_qdma_get() as utility routines for reading
a masked field from a specified register.
This is a non-functional refactor, no logical changes are introduced to
the existing codebase.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260501-airoha_fe_get-airoha_qdma_get-v3-1-126c6f647ccb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
psp_dev_rcv() unconditionally removes a fixed PSP_ENCAP_HLEN, even
when psph->hdrlen indicates that the PSP header carries optional
fields. A frame whose PSP header advertises a non-zero VC or any
extension would therefore be silently mis-decapsulated: option bytes
would spill into the inner packet head and downstream parsing would
fail on a corrupted skb.
Compute the full PSP header length from psph->hdrlen, pull the
optional bytes into the linear region, and strip the whole header
when decapsulating. Optional fields (VC, ...) are still ignored,
just discarded with the rest of the header instead of leaking.
crypt_offset and the VIRT flag are intentionally not validated here
- callers know their device's PSP implementation and can decide.
Both in-tree callers gate on hardware-validated PSP, so this is a
correctness fix rather than a reachable corruption path under
current configurations.
Fixes: 0eddb8023c ("psp: provide decapsulation and receive helper for drivers")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Daniel Zahka <daniel.zahka@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260502141945.14484-1-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I was mistaken by synchronize_rcu() [1] call in netdev_name_node_alt_destroy(),
giving a false sense of RCU safety at delete times.
We have to use list_del_rcu() to not confuse potential readers
in rtnl_prop_list_size().
[1] This synchronize_rcu() call was later removed in commit 723de3ebef
("net: free altname using an RCU callback").
Fixes: 9f30831390 ("net: add rcu safety to rtnl_prop_list_size()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260502124102.499204-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace magic number with register bit macros. The description of
the RTL8211B interrupt register is obtained from publicly available
datasheet (RTL8211B(L) Rev. 1.5 Datasheet)
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/20260502092857.156831-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: misc fixes for v7.1-rc3
Here are various unrelated fixes:
- Patch 1: increment the right MIB counter. A fix for v5.7.
- Patch 2: set the right MPTCP reset reason. A fix for v5.9.
- Patch 3: fix rx timestamp corruption when on MPTCP passive fastopen. A
fix for v6.2.
- Patch 4: increase sockopt seq after having set TCP_MAXSEG to propagate
it to newer subflows later. A fix for 6.17.
====================
Link: https://patch.msgid.link/20260501-net-mptcp-misc-fixes-7-1-rc3-v1-0-b70118df778e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_setsockopt_all_sf() was missing a call to sockopt_seq_inc(). This
is required not to cause missing synchronization for newer subflows
created later on.
This helper is called each time a socket option is set on subflows, and
future ones will need to inherit this option after their creation.
Fixes: 51c5fd09e1 ("mptcp: add TCP_MAXSEG sockopt support")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260501-net-mptcp-misc-fixes-7-1-rc3-v1-4-b70118df778e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
