The Xiaomi Mi Laptop Pro 15 (TM1905, subsystem 1d72:1905) ships with the
Realtek ALC256 codec on Intel Comet Lake PCH-LP. After S3 resume the
codec sets coefficient register 0x10 to 0x0220 instead of 0x0020 — bit 9
is erroneously set, which silences the internal speaker. Bluetooth and
HDMI audio are unaffected because they use different paths.
This is the same mechanism fixed for Clevo NJ51CU by commit edca7cc4b0
("ALSA: hda/realtek: Fix quirk for Clevo NJ51CU"), but the existing
ALC256_FIXUP_MIC_NO_PRESENCE_AND_RESUME also reconfigures pin 0x19 as a
front mic, which is wrong for this Xiaomi where pin 0x19 default is
0x411111f0 (disabled). Add a minimal fixup that only clears the stuck
coef bit, and add the Xiaomi SSID to the quirk table.
Verified by reading coef 0x10 with hda-verb after resume (returns
0x0220), writing 0x0020, and confirming the internal speaker resumes
output. With this fixup applied the bit is cleared on every codec init,
including post-resume.
Signed-off-by: Yuriy Padlyak <yuriypadlyak@gmail.com>
Cc: <stable@vger.kernel.org>
Tested-by: Yuriy Padlyak <yuriypadlyak@gmail.com>
Link: https://patch.msgid.link/20260429220903.14918-1-yuriypadlyak@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, get_non_dying_memcg_start() and get_non_dying_memcg_end() both
evaluate cgroup_subsys_on_dfl(memory_cgrp_subsys) independently to
determine whether to acquire or release the RCU read lock.
However, the result of cgroup_subsys_on_dfl() can change dynamically at
runtime due to cgroup hierarchy rebinding (e.g., when the memory
controller is moved between cgroup v1 and v2 hierarchies). This can cause
the following warning:
=====================================
WARNING: bad unlock balance detected!
7.0.0-next-20260420+ #83 Tainted: G W
-------------------------------------
memcg-repro/270 is trying to release lock (rcu_read_lock) at:
[<ffffffff815f57f7>] rcu_read_unlock+0x17/0x60
but there are no more locks to release!
other info that might help us debug this:
1 lock held by memcg-repro/270:
#0: ffff888102fa2088 (vm_lock){++++}-{0:0}, at: do_user_addr_fault+0x285/0x880
stack backtrace:
CPU: 0 UID: 0 PID: 270 Comm: memcg-repro Tainted: G W 7.0.0-next-20260420+ #
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
<TASK>
? rcu_read_unlock+0x17/0x60
dump_stack_lvl+0x77/0xb0
print_unlock_imbalance_bug+0xe0/0xf0
? rcu_read_unlock+0x17/0x60
lock_release+0x21d/0x2a0
rcu_read_unlock+0x1c/0x60
do_pte_missing+0x233/0xb40
__handle_mm_fault+0x80e/0xcd0
handle_mm_fault+0x146/0x310
do_user_addr_fault+0x303/0x880
exc_page_fault+0x9b/0x270
asm_exc_page_fault+0x26/0x30
RIP: 0033:0x5590e4eb41ea
Code: 61 cc 66 0f 6f e0 66 0f 61 c2 66 0f db cd 66 0f 69 e2 66 0f 6f d0 66 0f 69 d4 66 0f 61 0
RSP: 002b:00007ffcad25f030 EFLAGS: 00010202
RAX: 00005590e4eb8010 RBX: 00007ffcad260f7d RCX: 00007f73c474d44d
RDX: 00005590e4eb80a0 RSI: 00005590e4eb503c RDI: 000000000000000f
RBP: 00005590e4eb70a0 R08: 0000000000000000 R09: 00007f73c483a680
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffcad25f180 R14: 00005590e4eb6dd8 R15: 00007f73c4869020
</TASK>
------------[ cut here ]------------
Fix this by explicitly tracking the RCU lock state, ensuring that
rcu_read_unlock() in get_non_dying_memcg_end() is strictly paired with the
lock acquisition, regardless of any runtime rebinding events.
Link: https://lore.kernel.org/20260429073105.44472-1-qi.zheng@linux.dev
Fixes: 8285917d6f ("mm: memcontrol: prepare for reparenting non-hierarchical stats")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The DEFER_TASKRUN local task work paths all run under ctx->uring_lock,
which serializes them with each other and with the rest of the ring's
hot paths. io_move_task_work_from_local() is the exception - it's called
from io_ring_exit_work() on a kworker without holding the lock and from
the iopoll cancelation side right after dropping it.
->work_llist is fine with this, as it's only ever updated via the
expected paths. But the ->retry_llist is updated while runing, and hence
it could potentially race between normal task_work running and the
task-has-exited shutdown path.
Simply grab ->uring_lock while moving the local work to the fallback
list for exit purposes, which nicely serializes it across both the
normal additions and the exit prune path.
Cc: stable@vger.kernel.org
Fixes: f46b9cdb22 ("io_uring: limit local tw done")
Reported-by: Robert Femmer <robert.femmer@x41-dsec.de>
Reported-by: Christian Reitter <invd@inhq.net>
Reported-by: Michael Rodler <michael.rodler@x41-dsec.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the flag relax_fan_constraint is set, local variable 'raw'
is never assigned, and lwmi_om_hwmon_write() will pass uninitialized
value to lwmi_om_fan_get_set() resulting in undefined behavior.
This flag allows user to bypass minimum fan RPM divisor rounding,
but assignment to 'raw' only happens in the non-relaxed path.
Fix by defaulting 'raw' to user provided 'val' in the else branch.
Fixes: 51ed34282f ("platform/x86: lenovo-wmi-other: Add HWMON for fan reporting/tuning")
Reviewed-by: Rong Zhang <i@rong.moe>
Signed-off-by: Yufei CHENG <cd345al@gmail.com>
Link: https://patch.msgid.link/20260426165034.9073-1-cd345al@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen Max 16-ah0xxx, DMI board ID 8D41 is currently marked with
victus_s_thermal_params in the victus_s_thermal_profile_boards[] list.
This disables thermal profile readback and adds a dmesg warning during
driver init for "unknown board".
After testing we know that (similar to another HP Omen Max 16 device,
board ID 8D87), the embedded controller on this board does not expose
thermal profile which means we have to intentionally disable EC
readback.
Changing its driver_data to omen_v1_no_ec_thermal_params is sufficient
to silence the warning.
Tested-by: Benjamin Y <hectare.plains1h@icloud.com>
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260429180953.129885-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
After calling wmidev_evaluate_method(), if the ACPI core does not return
an out object, then wmidev_invoke_method() bypasses the min_size check
and returns 0. Add a check for min_size if there is not an out object.
Fixes: 1aeded2f55 ("platform/wmi: Extend wmidev_query_block() to reject undersized data")
Closes: https://sashiko.dev/#/patchset/20260406203237.2970-1-W_Armin%40gmx.de
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260429-invoke-fix-v1-1-ce938eb80cd3@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Return -EIO if efx_mcdi_rpc() doesn't return enough space.
Fixes: 14743ddd24 ("sfc: add devlink info support for ef100")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/afGpsbLRHL4_H0KS@stanley.mountain
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When tls_set_device_offload_rx() fails at tls_dev_add(), the error path
calls tls_sw_free_resources_rx() to clean up the SW context that was
initialized by tls_set_sw_offload(). This function calls
tls_sw_release_resources_rx() (which stops the strparser via
tls_strp_stop()) and tls_sw_free_ctx_rx() (which kfrees the context),
but never frees the anchor skb that was allocated by alloc_skb(0) in
tls_strp_init().
Note that tls_sw_free_resources_rx() is exclusively used for this
"failed to start offload" code path, there's no other caller.
The leak did not exist before commit 84c61fe1a7 ("tls: rx: do not use
the standard strparser"), because the standard strparser doesn't try
to pre-allocate an skb.
The normal close path in tls_sk_proto_close() handles cleanup by calling
tls_sw_strparser_done() (which calls tls_strp_done()) after dropping
the socket lock, because tls_strp_done() does cancel_work_sync() and
the strparser work handler takes the socket lock.
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260428231559.1358502-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jacob Keller says:
====================
Intel Wired LAN Update 2026-04-27 (ice, iavf)
Petr Oros from RedHat has accumulated a number of fixes for the Intel ice
and iavf drivers, bundled together in this series.
First, a series of 4 fixes to resolve issues with the iavf driver logic for
handling VLAN filters. This includes keeping VLAN filters while the
interface is brought down, waiting for confirmation on filter deletion
before deleting filters from the driver tracking structures, and handling
the VIRTCHNL_OP_ADD_VLAN for the old v1 VLAN_ADD command.
A fix for a crash in ice_reset_all_vfs(), properly checking for errors when
ice_vf_rebuild_vsi() fails.
A fix for a possible infinite recursion in ice_cfg_tx_topo() that occurs
when trying to apply invalid Tx topology configuration.
A fix to initialize the SMA pins in the DPLL subsystem properly.
A fix to change the SMA and U.FL pin state for paired pins, ensuring that
all flows changing one pin will also update its shared pin appropriately.
A preparatory patch to export __dpll_pin_change_ntf() so that drivers can
notify pin changes while already holding the dpll_lock.
A fix to ensure DPLL notifications are sent for the software-controlled
pins which wrap the physical CGU input/output pins.
A fix to add DPLL notifications for peer pins when changing the SMA or U.FL
pins, ensuring DPLL subsystem is notified about the paired connected pins.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
====================
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-0-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
SMA and U.FL pins share physical signal paths in pairs (SMA1/U.FL1 and
SMA2/U.FL2). When one pin's state changes via a PCA9575 GPIO write,
the paired pin's state also changes, but no notification is sent for
the peer pin. Userspace consumers monitoring the peer via dpll netlink
subscribe never learn about the update.
Add ice_dpll_sw_pin_notify_peer() which sends a change notification for
the paired SW pin. Call it from ice_dpll_pin_sma_direction_set(),
ice_dpll_sma_pin_state_set(), and ice_dpll_ufl_pin_state_set() after
pf->dplls.lock is released. Use __dpll_pin_change_ntf() because
dpll_lock is still held by the dpll netlink layer (dpll_pin_pre_doit).
Fixes: 2dd5d03c77 ("ice: redesign dpll sma/u.fl pins control")
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-11-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The SMA/U.FL pin redesign (commit 2dd5d03c77 ("ice: redesign dpll
sma/u.fl pins control")) introduced software-controlled pins that wrap
backing CGU input/output pins, but never updated the notification and
data paths to propagate pin events to these SW wrappers.
The periodic work sends dpll_pin_change_ntf() only for direct CGU input
pins. SW pins that wrap these inputs never receive change or phase
offset notifications, so userspace consumers such as synce4l monitoring
SMA pins via dpll netlink never learn about state transitions or phase
offset updates. Similarly, ice_dpll_phase_offset_get() reads the SW
pin's own phase_offset field which is never updated; the PPS monitor
writes to the backing CGU input's field instead.
Fix by introducing ice_dpll_pin_ntf(), a wrapper around
dpll_pin_change_ntf() that also notifies any registered SMA/U.FL pin
whose backing CGU input matches. Replace all direct
dpll_pin_change_ntf() calls in the periodic notification paths with
this wrapper. Fix ice_dpll_phase_offset_get() to return the backing
CGU input's phase_offset for input-direction SW pins.
Fixes: 2dd5d03c77 ("ice: redesign dpll sma/u.fl pins control")
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-10-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Export __dpll_pin_change_ntf() so that drivers can send pin change
notifications from within pin callbacks, which are already called
under dpll_lock. Using dpll_pin_change_ntf() in that context would
deadlock.
Add lockdep_assert_held() to catch misuse without the lock held.
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-9-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
SMA and U.FL pins share physical signal paths in pairs (SMA1/U.FL1 and
SMA2/U.FL2) controlled by the PCA9575 GPIO expander. Each pair can
only have one active pin at a time: SMA1 output and U.FL1 output share
the same CGU output, SMA2 input and U.FL2 input share the same CGU
input. The PCA9575 register bits determine which connector in each
pair owns the signal path.
The driver does not account for this pairing in two places:
ice_dpll_ufl_pin_state_set() modifies PCA9575 bits and disables the
backing CGU pin without checking whether the U.FL pin is currently
active. Disconnecting an already inactive U.FL pin flips bits that
the paired SMA pin relies on, breaking its connection.
ice_dpll_sma_direction_set() does not propagate direction changes to
the paired U.FL pin. For SMA2/U.FL2 the ICE_SMA2_UFL2_RX_DIS bit is
never managed, so U.FL2 stays disconnected after SMA2 switches to
output. For both pairs the backing CGU pin of the U.FL side is never
enabled when a direction change activates it, so userspace sees the
pin as disconnected even though the routing is correct.
Fix by guarding the U.FL disconnect path against inactive pins and by
updating the paired U.FL pin fully on SMA direction changes: manage
ICE_SMA2_UFL2_RX_DIS for the SMA2/U.FL2 pair and enable the backing
CGU pin whenever the peer becomes active.
Fixes: 2dd5d03c77 ("ice: redesign dpll sma/u.fl pins control")
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-8-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The DPLL SMA/U.FL pin redesign introduced ice_dpll_sw_pin_frequency_get()
which gates frequency reporting on the pin's active flag. This flag is
determined by ice_dpll_sw_pins_update() from the PCA9575 GPIO expander
state. Before the redesign, SMA pins were exposed as direct HW
input/output pins and ice_dpll_frequency_get() returned the CGU
frequency unconditionally — the PCA9575 state was never consulted.
The PCA9575 powers on with all outputs high, setting ICE_SMA1_DIR_EN,
ICE_SMA1_TX_EN, ICE_SMA2_DIR_EN and ICE_SMA2_TX_EN. Nothing in the
driver writes the register during initialization, so
ice_dpll_sw_pins_update() sees all pins as inactive and
ice_dpll_sw_pin_frequency_get() permanently returns 0 Hz for every
SW pin.
Fix this by writing a default SMA configuration in
ice_dpll_init_info_sw_pins(): clear all SMA bits, then set SMA1 and
SMA2 as active inputs (DIR_EN=0) with U.FL1 output and U.FL2 input
disabled. Each SMA/U.FL pair shares a physical signal path so only
one pin per pair can be active at a time. U.FL pins still report
frequency 0 after this fix: U.FL1 (output-only) is disabled by
ICE_SMA1_TX_EN which keeps the TX output buffer off, and U.FL2
(input-only) is disabled by ICE_SMA2_UFL2_RX_DIS. They can be
activated by changing the corresponding SMA pin direction via dpll
netlink.
Fixes: 2dd5d03c77 ("ice: redesign dpll sma/u.fl pins control")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-7-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On certain E810 configurations where firmware supports Tx scheduler
topology switching (tx_sched_topo_comp_mode_en), ice_cfg_tx_topo()
may need to apply a new 5-layer or 9-layer topology from the DDP
package. If the AQ command to set the topology fails (e.g. due to
invalid DDP data or firmware limitations), the global configuration
lock must still be cleared via a CORER reset.
Commit 86aae43f21 ("ice: don't leave device non-functional if Tx
scheduler config fails") correctly fixed this by refactoring
ice_cfg_tx_topo() to always trigger CORER after acquiring the global
lock and re-initialize hardware via ice_init_hw() afterwards.
However, commit 8a37f9e2ff ("ice: move ice_deinit_dev() to the end
of deinit paths") later moved ice_init_dev_hw() into ice_init_hw(),
breaking the reinit path introduced by 86aae43f21. This creates an
infinite recursive call chain:
ice_init_hw()
ice_init_dev_hw()
ice_cfg_tx_topo() # topology change needed
ice_deinit_hw()
ice_init_hw() # reinit after CORER
ice_init_dev_hw() # recurse
ice_cfg_tx_topo()
... # stack overflow
Fix by moving ice_init_dev_hw() back out of ice_init_hw() and calling
it explicitly from ice_probe() and ice_devlink_reinit_up(). The third
caller, ice_cfg_tx_topo(), intentionally does not need ice_init_dev_hw()
during its reinit, it only needs the core HW reinitialization. This
breaks the recursion cleanly without adding flags or guards.
The deinit ordering changes from commit 8a37f9e2ff ("ice: move
ice_deinit_dev() to the end of deinit paths") which fixed slow rmmod
are preserved, only the init-side placement of ice_init_dev_hw() is
reverted.
Fixes: 8a37f9e2ff ("ice: move ice_deinit_dev() to the end of deinit paths")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-6-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ice_reset_all_vfs() ignores the return value of ice_vf_rebuild_vsi().
When the VSI rebuild fails (e.g. during NVM firmware update via
nvmupdate64e), ice_vsi_rebuild() tears down the VSI on its error path,
leaving txq_map and rxq_map as NULL. The subsequent unconditional call
to ice_vf_post_vsi_rebuild() leads to a NULL pointer dereference in
ice_ena_vf_q_mappings() when it accesses vsi->txq_map[0].
The single-VF reset path in ice_reset_vf() already handles this
correctly by checking the return value of ice_vf_reconfig_vsi() and
skipping ice_vf_post_vsi_rebuild() on failure.
Apply the same pattern to ice_reset_all_vfs(): check the return value
of ice_vf_rebuild_vsi() and skip ice_vf_post_vsi_rebuild() and
ice_eswitch_attach_vf() on failure. The VF is left safely disabled
(ICE_VF_STATE_INIT not set, VFGEN_RSTAT not set to VFACTIVE) and can
be recovered via a VFLR triggered by a PCI reset of the VF
(sysfs reset or driver rebind).
Note that this patch does not prevent the VF VSI rebuild from failing
during NVM update — the underlying cause is firmware being in a
transitional state while the EMP reset is processed, which can cause
Admin Queue commands (ice_add_vsi, ice_cfg_vsi_lan) to fail. This
patch only prevents the subsequent NULL pointer dereference that
crashes the kernel when the rebuild does fail.
crash> bt
PID: 50795 TASK: ff34c9ee708dc680 CPU: 1 COMMAND: "kworker/u512:5"
#0 [ff72159bcfe5bb50] machine_kexec at ffffffffaa8850ee
#1 [ff72159bcfe5bba8] __crash_kexec at ffffffffaaa15fba
#2 [ff72159bcfe5bc68] crash_kexec at ffffffffaaa16540
#3 [ff72159bcfe5bc70] oops_end at ffffffffaa837eda
#4 [ff72159bcfe5bc90] page_fault_oops at ffffffffaa893997
#5 [ff72159bcfe5bce8] exc_page_fault at ffffffffab528595
#6 [ff72159bcfe5bd10] asm_exc_page_fault at ffffffffab600bb2
[exception RIP: ice_ena_vf_q_mappings+0x79]
RIP: ffffffffc0a85b29 RSP: ff72159bcfe5bdc8 RFLAGS: 00010206
RAX: 00000000000f0000 RBX: ff34c9efc9c00000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff34c9efc9c00000
RBP: ff34c9efc27d4828 R8: 0000000000000093 R9: 0000000000000040
R10: ff34c9efc27d4828 R11: 0000000000000040 R12: 0000000000100000
R13: 0000000000000010 R14: R15:
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ff72159bcfe5bdf8] ice_sriov_post_vsi_rebuild at ffffffffc0a85e2e [ice]
#8 [ff72159bcfe5be08] ice_reset_all_vfs at ffffffffc0a920b4 [ice]
#9 [ff72159bcfe5be48] ice_service_task at ffffffffc0a31519 [ice]
#10 [ff72159bcfe5be88] process_one_work at ffffffffaa93dca4
#11 [ff72159bcfe5bec8] worker_thread at ffffffffaa93e9de
#12 [ff72159bcfe5bf18] kthread at ffffffffaa946663
#13 [ff72159bcfe5bf50] ret_from_fork at ffffffffaa8086b9
The panic occurs attempting to dereference the NULL pointer in RDX at
ice_sriov.c:294, which loads vsi->txq_map (offset 0x4b8 in ice_vsi).
The faulting VSI is an allocated slab object but not fully initialized
after a failed ice_vsi_rebuild():
crash> struct ice_vsi 0xff34c9efc27d4828
netdev = 0x0,
rx_rings = 0x0,
tx_rings = 0x0,
q_vectors = 0x0,
txq_map = 0x0,
rxq_map = 0x0,
alloc_txq = 0x10,
num_txq = 0x10,
alloc_rxq = 0x10,
num_rxq = 0x10,
The nvmupdate64e process was performing NVM firmware update:
crash> bt 0xff34c9edd1a30000
PID: 49858 TASK: ff34c9edd1a30000 CPU: 1 COMMAND: "nvmupdate64e"
#0 [ff72159bcd617618] __schedule at ffffffffab5333f8
#4 [ff72159bcd617750] ice_sq_send_cmd at ffffffffc0a35347 [ice]
#5 [ff72159bcd6177a8] ice_sq_send_cmd_retry at ffffffffc0a35b47 [ice]
#6 [ff72159bcd617810] ice_aq_send_cmd at ffffffffc0a38018 [ice]
#7 [ff72159bcd617848] ice_aq_read_nvm at ffffffffc0a40254 [ice]
#8 [ff72159bcd6178b8] ice_read_flat_nvm at ffffffffc0a4034c [ice]
#9 [ff72159bcd617918] ice_devlink_nvm_snapshot at ffffffffc0a6ffa5 [ice]
dmesg:
ice 0000:13:00.0: firmware recommends not updating fw.mgmt, as it
may result in a downgrade. continuing anyways
ice 0000:13:00.1: ice_init_nvm failed -5
ice 0000:13:00.1: Rebuild failed, unload and reload driver
Fixes: 12bb018c53 ("ice: Refactor VF reset")
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-5-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The V1 ADD_VLAN opcode had no success handler; filters sent via V1
stayed in ADDING state permanently. Add a fallthrough case so V1
filters also transition ADDING -> ACTIVE on PF confirmation.
Critically, add an `if (v_retval) break` guard: the error switch in
iavf_virtchnl_completion() does NOT return after handling errors,
it falls through to the success switch. Without this guard, a
PF-rejected ADD would incorrectly mark ADDING filters as ACTIVE,
creating a driver/HW mismatch where the driver believes the filter
is installed but the PF never accepted it.
For V2, this is harmless: iavf_vlan_add_reject() in the error
block already kfree'd all ADDING filters, so the success handler
finds nothing to transition.
Fixes: 968996c070 ("iavf: Fix VLAN_V2 addition/rejection")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-4-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The VLAN filter DELETE path was asymmetric with the ADD path: ADD
waits for PF confirmation (ADD -> ADDING -> ACTIVE), but DELETE
immediately frees the filter struct after sending the DEL message
without waiting for the PF response.
This is problematic because:
- If the PF rejects the DEL, the filter remains in HW but the driver
has already freed the tracking structure, losing sync.
- Race conditions between DEL pending and other operations
(add, reset) cannot be properly resolved if the filter struct
is already gone.
Add IAVF_VLAN_REMOVING state to make the DELETE path symmetric:
REMOVE -> REMOVING (send DEL) -> PF confirms -> kfree
-> PF rejects -> ACTIVE
In iavf_del_vlans(), transition filters from REMOVE to REMOVING
instead of immediately freeing them. The new DEL completion handler
in iavf_virtchnl_completion() frees filters on success or reverts
them to ACTIVE on error.
Update iavf_add_vlan() to handle the REMOVING state: if a DEL is
pending and the user re-adds the same VLAN, queue it for ADD so
it gets re-programmed after the PF processes the DEL.
The !VLAN_FILTERING_ALLOWED early-exit path still frees filters
directly since no PF message is sent in that case.
Also update iavf_del_vlan() to skip filters already in REMOVING
state: DEL has been sent to PF and the completion handler will
free the filter when PF confirms. Without this guard, the sequence
DEL(pending) -> user-del -> second DEL could cause the PF to return
an error for the second DEL (filter already gone), causing the
completion handler to incorrectly revert a deleted filter back to
ACTIVE.
Fixes: 968996c070 ("iavf: Fix VLAN_V2 addition/rejection")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-3-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a VF goes down, the driver currently sends DEL_VLAN to the PF for
every VLAN filter (ACTIVE -> DISABLE -> send DEL -> INACTIVE), then
re-adds them all on UP (INACTIVE -> ADD -> send ADD -> ADDING ->
ACTIVE). This round-trip is unnecessary because:
1. The PF disables the VF's queues via VIRTCHNL_OP_DISABLE_QUEUES,
which already prevents all RX/TX traffic regardless of VLAN filter
state.
2. The VLAN filters remaining in PF HW while the VF is down is
harmless - packets matching those filters have nowhere to go with
queues disabled.
3. The DEL+ADD cycle during down/up creates race windows where the
VLAN filter list is incomplete. With spoofcheck enabled, the PF
enables TX VLAN filtering on the first non-zero VLAN add, blocking
traffic for any VLANs not yet re-added.
Remove the entire DISABLE/INACTIVE state machinery:
- Remove IAVF_VLAN_DISABLE and IAVF_VLAN_INACTIVE enum values
- Remove iavf_restore_filters() and its call from iavf_open()
- Remove VLAN filter handling from iavf_clear_mac_vlan_filters(),
rename it to iavf_clear_mac_filters()
- Remove DEL_VLAN_FILTER scheduling from iavf_down()
- Remove all DISABLE/INACTIVE handling from iavf_del_vlans()
VLAN filters now stay ACTIVE across down/up cycles. Only explicit
user removal (ndo_vlan_rx_kill_vid) or PF/VF reset triggers VLAN
filter deletion/re-addition.
Fixes: ed1f5b58ea ("i40evf: remove VLAN filters on close")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-2-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rename the IAVF_VLAN_IS_NEW state to IAVF_VLAN_ADDING to better
describe what the state represents: an ADD request has been sent to
the PF and is waiting for a response.
This is a pure rename with no behavioral change, preparing for a
cleanup of the VLAN filter state machine.
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-1-cdcb48303fd8@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Eric Biggers says:
====================
Reimplement TCP-AO using crypto library
This series can also be retrieved from:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux.git tcp-ao-v2
This series is targeting net-next for 7.2. To make this series
self-contained in the networking code, I dropped the patches that remove
support for transformation cloning from the crypto API, which is a
further negative 275-line cleanup and optimization this series enables.
That will be done as a follow-up, either through the crypto tree for
7.3, or still through net-next for 7.2 at maintainer preference.
This series refactors the TCP-AO (TCP Authentication Option) code to do
MAC and KDF computations using lib/crypto/ instead of crypto_ahash.
This greatly simplifies the code and makes it much more efficient. The
entire tcp_sigpool mechanism becomes unnecessary and is removed, as the
problems it was designed to solve don't exist with the library APIs.
The crypto API's support for crypto transformation cloning also becomes
unnecessary and will be removed in follow-up patches. Note that as part
of that, we'll be able to roll back the addition of the reference count
to crypto_tfm, which had regressed performance for all crypto API users.
To make this simplification and optimization possible, this series also
updates the TCP-AO code to support a specific set of algorithms, rather
than arbitrary algorithms that don't make sense and are very likely not
being used, e.g. CRC-32 and HMAC-MD5.
Specifically, this series retains the support for AES-128-CMAC,
HMAC-SHA1, and HMAC-SHA256. AES-128-CMAC and HMAC-SHA1 are the only
algorithms that are actually standardized for use in TCP-AO, while
HMAC-SHA256 makes sense to continue supporting as a Linux extension. Of
course, other algorithms can still be (re-)added later if ever needed.
It's worth noting that TCP-AO MACs are limited to 20 bytes by the TCP
options space, which limits the benefit of further algorithm upgrades.
This series passes the tcp_ao selftests
(sudo make -C tools/testing/selftests/net/tcp_ao/ run_tests).
To get a sense for how much more efficient this makes the TCP-AO code,
here's a microbenchmark for tcp_ao_hash_skb() with skb->len == 128:
Algorithm Avg cycles (before) Avg cycles (after)
--------- ------------------- ------------------
HMAC-SHA1 3319 1256
HMAC-SHA256 3311 1344
AES-128-CMAC 2720 1107
====================
Link: https://patch.msgid.link/20260427172727.9310-1-ebiggers@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
tcp_sigpool is no longer used. It existed only as a workaround for
issues in the design of the crypto_ahash API, which have been avoided by
switching to the much easier-to-use library APIs instead. Remove it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260427172727.9310-6-ebiggers@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since tcp-ao now uses the crypto library API instead of crypto_ahash,
and MACs and keys now have a statically-known maximum size, many tcp-ao
functions can no longer fail. Propagate this change up into the return
types of various functions.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260427172727.9310-5-ebiggers@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that the maximum MAC and traffic key lengths are statically-known
small values, allocate MACs and traffic keys on the stack instead of
with kmalloc. This eliminates multiple failure-prone GFP_ATOMIC
allocations.
Note that some cases such as tcp_ao_prepare_reset() are left unchanged
for now since they would require slightly wider changes.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260427172727.9310-4-ebiggers@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently the kernel's TCP-AO implementation does the MAC and KDF
computations using the crypto_ahash API. This API is inefficient and
difficult to use, and it has required extensive workarounds in the form
of per-CPU preallocated objects (tcp_sigpool) to work at all.
Let's use lib/crypto/ instead. This means switching to straightforward
stack-allocated structures, virtually addressed buffers, and direct
function calls. It also means removing quite a bit of error handling.
This makes TCP-AO quite a bit faster.
This also enables many additional cleanups, which later commits will
handle: removing tcp-sigpool, removing support for crypto_tfm cloning,
removing more error handling, and replacing more dynamically-allocated
buffers with stack buffers based on the now-statically-known limits.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260427172727.9310-3-ebiggers@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
RFC 5926 (https://datatracker.ietf.org/doc/html/rfc5926) specifies the
use of AES-128-CMAC and HMAC-SHA1 with TCP-AO. This includes a
specification for how traffic keys shall be derived for each algorithm.
Support for any other algorithms with TCP-AO isn't standardized, though
an expired Internet Draft (a work-in-progress document, not a standard)
from 2019 does propose adding HMAC-SHA256 support:
https://datatracker.ietf.org/doc/html/draft-nayak-tcp-sha2-03
Since both documents specify the KDF for each algorithm individually, it
isn't necessarily clear how any other algorithm should be integrated.
Nevertheless, the Linux implementation of TCP-AO allows userspace to
specify the MAC algorithm as a string tcp_ao_add::alg_name naming either
"cmac(aes128)" or an arbitrary algorithm in the crypto_ahash API. The
set of valid strings is undocumented. The implementation assumes that
"cmac(aes128)" is the only algorithm that requires an entropy extraction
step and that all algorithms accept keys with length equal to the
untruncated MAC; thus, arbitrary HMAC algorithms probably do work, but
some other MAC algorithms like AES-256-CMAC have never actually worked.
Unfortunately, this undocumented string allows many obsolete, insecure,
or redundant algorithms. For example, "hmac(md5)" and the
non-cryptographic "crc32" are accepted. It also ties the implementation
to crypto_ahash and requires that most memory be dynamically allocated,
making the implementation unnecessarily complex and inefficient. Still
furthermore, this implementation requires the crypto API to support
"transformation cloning", whose only user is this feature.
Fortunately, it's very likely that only a few algorithms are actually
used in practice. Let's restrict the set of allowed algorithms to
"cmac(aes128)" (or "cmac(aes)" with keylen=16), "hmac(sha1)", and
"hmac(sha256)". The first two are the actually standard ones, while
HMAC-SHA256 seems like a reasonable algorithm to continue supporting as
a Linux extension, considering the Internet Draft for it and the fact
that SHA-256 is the usual choice of upgrade from the outdated SHA-1.
If any other algorithm ever turns out to be needed, e.g. HMAC-SHA512, it
can of course be (re-)added in library form. However, note that the TCP
options space limits TCP-AO MACs to 20 bytes (160 bits) anyway, which
limits the potential benefit of any further upgrade to the algorithm.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260427172727.9310-2-ebiggers@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The CONFIG_PA11 option can not be used as a reliable check if we build a
32-bit kernel which needs the 32-bit VDSO.
Instead depend on CONFIG_64BIT and CONFIG_COMPAT only.
Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Tested-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Signed-off-by: Helge Deller <deller@gmx.de>
sashiko says:
could the related code in __nf_tables_abort() leak the struct nft_hook objects when the table is dormant?
In __nf_tables_abort(), when rolling back a NEWCHAIN transaction that
updates hooks, the code conditionally unregisters and frees the hooks only
if the table is not dormant [..]
if (!(table->flags & NFT_TABLE_F_DORMANT)) {
nft_netdev_unregister_hooks(net,
&nft_trans_chain_hooks(trans),
true);
}
...
nft_trans_destroy(trans);
Unfortunately netdev family mixes hook registration and allocation.
Push table struct down and only check for the flag to unregister.
Fixes: 216e7bf740 ("netfilter: nf_tables: skip netdev hook unregistration if table is dormant")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
While resurrecting the conntrack-tool test cases I found following bug:
In:
iptables -I OUTPUT -t raw -p 13 -j CT --timeout test-generic
Out:
[0:0] -A OUTPUT -p 13 -j CT --timeout test
Data after first four bytes of the timeout policy name is never
copied to userspace because its treated as kernel-only.
Fixes: ec23189049 ("xtables: extend matches and targets with .usersize")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Several matches and one target check that the hook is correct from
checkentry(), however, the basechain is only available from
nft_table_validate().
This patch uses xt_check_hooks_{match,target}() from the nft_compat
expression .validate path.
This patch sets the table in the nft_ctx struct in nft_table_validate()
which is required by this patch.
Based on patch from Florian Westphal.
Fixes: 0ca743a559 ("netfilter: nf_tables: add compatibility layer for x_tables")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a new .check_hooks interface for checking if the match/target is
used from the validate hook according to its configuration.
Move existing conditional hook check based on the match/target
configuration from .checkentry to .check_hooks for the following
matches/targets:
- addrtype
- devgroup
- physdev
- policy
- set
- TCPMSS
- SET
This is a preparation patch to fix nft_compat, not functional changes
are intended.
Based on patch from Florian Westphal.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
- Fix inverted check of registering the stats for branch tracing
When calling register_stat_tracer() which returns zero on success and
negative on error, the callers were checking the return of zero as an
error and printing a warning message. Because this was just a normal
printk() message and not a WARN(), it wasn't caught in any testing.
Fix the check to print the warning message when an error actually happens.
- Fix a typo in a comment in tracepoint.h
- Limit the size of event probes to 3K in size
It is possible to create a dynamic event probe via the tracefs system that
is greater than the max size of an event that the ring buffer can hold.
This basically causes the event to become useless. Limit the size of an
event probe to be 3K as that should be large enough to handle any dynamic
events being created, and fits within the PAGE_SIZE sub-buffers of the
ring buffer.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCafJn9hQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quUaAP9ezC2VXWugRIhOEmK0pIpY90zddsyv
xYTa3XuPP2r5JQEA8DcmH6fTo7JJxzbbyWPot/EgaqMt5XguqKC7txhjfww=
=+e7q
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix inverted check of registering the stats for branch tracing
When calling register_stat_tracer() which returns zero on success and
negative on error, the callers were checking the return of zero as an
error and printing a warning message. Because this was just a normal
printk() message and not a WARN(), it wasn't caught in any testing.
Fix the check to print the warning message when an error actually
happens.
- Fix a typo in a comment in tracepoint.h
- Limit the size of event probes to 3K in size
It is possible to create a dynamic event probe via the tracefs system
that is greater than the max size of an event that the ring buffer
can hold. This basically causes the event to become useless.
Limit the size of an event probe to be 3K as that should be large
enough to handle any dynamic events being created, and fits within
the PAGE_SIZE sub-buffers of the ring buffer.
* tag 'trace-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Limit size of event probe to 3K
tracepoint: Fix typo in tracepoint.h comment
tracing: branch: Fix inverted check on stat tracer registration
This driver provides a gpio chip, which is only possible when GPIOLIB
is enabled, which was previously guaranteed by the CONFIG_OF_GPIO
dependency that is now gone:
ERROR: modpost: "gpiochip_get_data" [drivers/regulator/rpi-panel-attiny-regulator.ko] undefined!
ERROR: modpost: "devm_gpiochip_add_data_with_key" [drivers/regulator/rpi-panel-attiny-regulator.ko] undefined!
Add an explicit GPIOLIB dependency instead.
Fixes: bf017304fc ("regulator: drop unneeded dependencies on OF_GPIO")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260429135812.112514-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When page_pool_create_percpu() fails on page_pool_list(), it falls
through to its err_uninit: label, which calls page_pool_uninit().
At that point page_pool_init() has already taken two references
when the user requested PP_FLAG_ALLOW_UNREADABLE_NETMEM:
pool->mp_ops->init(pool)
static_branch_inc(&page_pool_mem_providers);
Neither is undone by page_pool_uninit(); both are only undone by
__page_pool_destroy() (success-side teardown). The error path
therefore leaks the per-provider reference taken by mp_ops->init
(io_zcrx_ifq->refs in the io_uring zcrx provider, the dmabuf
binding refcount in the devmem provider) plus one increment of
the page_pool_mem_providers static branch on every failure of
xa_alloc_cyclic() inside page_pool_list().
The leaked io_zcrx_ifq->refs in turn pins everything
io_zcrx_ifq_free() would release on cleanup: ifq->user (uid),
ifq->mm_account (mmdrop), ifq->dev (device refcount),
ifq->netdev_tracker (netdev refcount), and the rbuf region.
The leaked static branch increment forces all subsequent
page_pool_alloc_netmems() and page_pool_return_page() callers to
take the slow mp_ops branch for the lifetime of the kernel.
Reachable via the io_uring zcrx path:
io_uring_register(IORING_REGISTER_ZCRX_IFQ) /* CAP_NET_ADMIN */
-> __io_uring_register
-> io_register_zcrx
-> zcrx_register_netdev
-> netif_mp_open_rxq
-> driver ndo_queue_mem_alloc
-> page_pool_create_percpu
-> page_pool_init succeeds (mp_ops->init runs, branch++)
-> page_pool_list fails (xa_alloc_cyclic -ENOMEM)
-> goto err_uninit <-- leak
The same shape applies to the devmem dmabuf provider via
mp_dmabuf_devmem_init()/mp_dmabuf_devmem_destroy().
Restore the cleanup symmetry by moving the mp_ops->destroy() and
static_branch_dec() calls out of __page_pool_destroy() and into
page_pool_uninit(), so page_pool_uninit() is again the strict
inverse of page_pool_init(). page_pool_uninit() has only two
callers (the err_uninit: path and __page_pool_destroy()), so this
preserves the single-call invariant on the success path while
fixing the err path. The error path of page_pool_init() itself
still skips the mp_ops cleanup correctly: mp_ops->init is the
last action that takes a reference before page_pool_init() returns
0, so when it returns an error neither the refcount nor the static
branch has been touched.
Triggering the bug requires xa_alloc_cyclic() to fail with -ENOMEM,
which under normal GFP_KERNEL retry behaviour is rare. It is
deterministic under CONFIG_FAULT_INJECTION with fail_page_alloc /
xa fault injection, or under sustained memory pressure. The leak
is silent: there is no warning, and the released kernel build
continues running with a permanently-incremented static branch.
Fixes: 0f92140468 ("memory-provider: dmabuf devmem memory provider")
Signed-off-by: Hasan Basbunar <basbunarhasan@gmail.com>
Link: https://patch.msgid.link/20260428170739.34881-1-basbunarhasan@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Always complete the airoha_dev_stop() routine regardless of the
airoha_set_vip_for_gdm_port() return value, since errors from
ndo_stop() are ignored by the networking stack and the interface is
always considered down after the call.
Fixes: 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260428-airoha-ndo-stop-not-err-v1-1-674506d29a91@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
OF_GPIO is selected automatically on all OF systems. Any symbols it
controls also provide stubs so there's really no reason to select it
explicitly.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260428093338.35043-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace explicit testing of bits and clearing these bits by existing
functions ocp_word_test_and_clr_bits() and r8152_mdio_test_and_clr_bit()
to re-use this code.
This allows to remove the "ocp_data" variable. Also remove the "ret" variable
which was incorrectly used for the r8153_phy_status() return value which
is a u16, so that the remaining "data" variable is sufficient.
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Link: https://patch.msgid.link/20260428-use_bit_functions-v1-1-6eb5a3507610@birger-koblitz.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
net/mlx5: Fix E-Switch work queue deadlock with devlink lock
mlx5_eswitch_cleanup() calls destroy_workqueue() while holding the
devlink lock through mlx5_uninit_one(). E-Switch workqueue workers also
need the devlink lock, but previously took it before checking whether
their work item was stale. Cleanup can therefore wait for a worker that
is blocked on the same devlink lock.
Mode changes have the same ordering hazard: the mode-change path holds
devlink lock while tearing down the current mode, and old work may still
be pending on the E-Switch workqueue.
Fix this by making esw_wq_handler() check the generation counter before
attempting to take devlink lock. The worker uses devl_trylock(); if the
lock is busy and the work is still current, it sleeps on an E-Switch wait
queue with a short timeout. Invalidation increments the generation
counter and wakes the wait queue, so stale workers exit without spinning
or blocking cleanup.
The generation counter already existed but was buried in
mlx5_esw_functions and only covered function-change events. The three
patches get from there to the fix in small steps.
Patch 1 moves the counter up to mlx5_eswitch. Pure refactor,
no behavior change.
Patch 2 cleans up the work queue plumbing: factors out the repeated
lock/check/dispatch boilerplate into a single esw_wq_handler() and
adds mlx5_esw_add_work() as the one place to enqueue work.
Patch 3 is the actual fix: check the generation before the lock, use
devl_trylock() instead of devl_lock(), add a wait queue so lock retries
do not spin, and invalidate pending work at the earliest safe operation
boundary. Cleanup invalidates before destroy_workqueue(), and mode
teardown unregisters the work-producing notifiers before invalidating so
new notifier work cannot capture the new generation.
====================
Link: https://patch.msgid.link/20260428051018.219093-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5_eswitch_cleanup() calls destroy_workqueue() while holding the
devlink lock through mlx5_uninit_one(). E-Switch workqueue workers also
need the devlink lock, but previously took it before checking whether
their work item was stale. This can deadlock when cleanup waits for a
worker that is blocked on the same devlink lock.
Mode changes have the same ordering hazard: the mode-change path holds
devlink lock while tearing down the current mode, and old work may still
be pending on the E-Switch workqueue.
Fix this by making esw_wq_handler() check the generation counter before
attempting to take devlink lock. The worker uses devl_trylock(); if the
lock is busy and the work is still current, it sleeps on an E-Switch wait
queue with a short timeout. Invalidation increments the generation
counter and wakes the wait queue, so stale workers exit without spinning
or blocking cleanup.
Invalidate work at the earliest safe operation boundary. Cleanup
invalidates before destroy_workqueue(), and QoS cleanup runs after the
workqueue is destroyed. Mode teardown unregisters the work-producing
notifiers first, then invalidates the queue before tearing down
FDB/QoS/rate-node state. This prevents new notifier work from capturing
the new generation while still making old work stale before expensive
teardown starts.
mlx5_devlink_eswitch_mode_set() now relies on
mlx5_eswitch_disable_locked() for the mode-change invalidation instead
of incrementing the generation after disable. mlx5_eswitch_disable()
gets the same coverage. SR-IOV enable/disable paths invalidate before VF
state changes so work against the old VF count or mode is discarded.
Remove the conditional generation increment in
mlx5_eswitch_event_handler_unregister(); mlx5_eswitch_disable_locked()
now handles it unconditionally after the relevant notifiers are
unregistered.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260428051018.219093-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each E-Switch work item requires the same boilerplate: acquire the
devlink lock, check whether the work is stale, dispatch to the
appropriate handler, and release the lock. Factor this out.
Add a func callback to mlx5_host_work so the generic handler
esw_wq_handler() can dispatch to the right function without
duplicating locking logic. Introduce mlx5_esw_add_work() as the
single enqueue point: it stamps the work item with the current
generation counter and queues it onto the E-Switch work queue.
Refactor esw_vfs_changed_event_handler() to match the new contract:
it no longer receives work_gen or out as parameters. It queries
mlx5_esw_query_functions() itself and owns the kvfree() of the
result. The devlink lock is acquired and released by esw_wq_handler()
before dispatching, so the handler runs with the lock already held.
Update mlx5_esw_funcs_changed_handler() to use mlx5_esw_add_work().
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260428051018.219093-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The generation counter in mlx5_esw_functions is used to detect stale
work items on the E-Switch work queue. Move it from mlx5_esw_functions
to the top-level mlx5_eswitch struct so it can guard all work types,
not just function-change events.
This is a mechanical refactor: no behavioral change.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260428051018.219093-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
VMBUS ring buffers must be page aligned. Therefore, the current value of
24K presents a challenge on ARM64 kernels (with 64K pages). So, use
VMBUS_RING_SIZE() to ensure they are always aligned and large enough to
hold all of the relevant data.
Cc: stable@vger.kernel.org
Fixes: 77ffe33363 ("hv_sock: use HV_HYP_PAGE_SIZE for Hyper-V communication")
Tested-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260428125339.13963-1-hamzamahfooz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When configuring the link parameters in forced mode for the AQR-105, the
Extended Next Page bit gets advertised for Multi-Gigabit modes.
This is done through bit 12 of MDIO_AN_ADVERTISE in MDIO_MMD_AN. This
contains a copy of the MII_ADVERTISE, for which 802.3 defines bit 12 as
the Extended Next Page advertising. This bit used to be marked as
reserved, but a proper define for it was added in :
commit e7a62edd34 ("net: phy: qcom: at803x: Use the correct bit to disable extended next page")
Let's use it instead of the ADVERTISE_RESV definition, making the code
more self-documenting.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260428125827.238469-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
net: psp: add more validation
Address some AI code-scan issues with the PSP code.
I don't think any of these are real bugs, but they may
become bugs in the future. The two real bugs discovered
were posted separately for net. AI reports 3 more which
seem plain wrong (rx SPI "leak" on error etc.).
====================
Link: https://patch.msgid.link/20260428205352.1247325-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
psp_dev_rcv() is called from the NIC driver's RX completion path
before the frame reaches ip_rcv_core(), so the IP header has not
been validated in SW, yet. We expect that the device has done
all this validation, but let's also add the SW checks, to avoid
surprises.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260428205352.1247325-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
